Primacare Brochure

Sturdy grab handle with
controls for back recline and full tilt
in space recline
Tintern Porter
Dual Tilt-in-space
Upright seating
position if
required
Slide out tray for foot support
4 large castors, 2 rear castors
are braked.
Manual or electric reclining
chair with adjustable back
rest recline and full tilt in
space recline operated by
the carer.
•Other Porter chairs available with
alternative movement options. See
separate specialist Porter/Mobile
brochure
•Various foam/gel seating options
possible. Available in any fabric
Leg rest
raised and
chair tilted
back
Model shown in
Voyage mulberry vinyl
with plum VP cushions
Porter chair mode
Removable seat module
Accessories
Electric rise and recline actions
Fabrics
Primacare can offer a chair manufactured to
specific dimensions providing appropriate
support and comfort that includes a duvet
with memory foam.
Design capabilities include seat widths from
22”-34” and weight capacities up to
70 stone.
A new innovation has been the introduction
of a new lower profile action which
allows for thicker high density
foam giving the most
comfortable seating position
possible.
Seat heights as low as
15” are possible without
compromising comfort.
Styles can be selected from
the standard range of rise
and recline chairs.
Standard chairs are supplied with simple push
button controllers and 24 volt transformers with
emergency recovery. Optional extras include full
battery back up, hazard sensors (anti-entrapment)
and massage and heat pad systems
all primacare chairs can be specified with one of the eight recliner actions shown
Range A: The ‘Diamond’ fabric range is a General
Domestic quality fabric available in four colours
(beige, green, blue and red) on all models and also
NextDay on the Aberdare and Brecon standard
size chairs.
Reclined position Semi-reclined
Full Battery Back-Up unit
enabling the chair to be
operated up to 80 cycles
before recharging
Comfortable
fully reclined
position
Tintern style 35 stone heavy leg lift chair 26” wide
in Peacock Ultima vinyl with Plum VP 4-way stretch
fabric to the cushions
Denbigh style 40 stone chair, 30” wide with a
removable arm. The chair shown is in Boltaflex
quattro sky main fabric with a special Vyflex sky
colour stretch vinyl seat over a prima gel pressure
reducing seat interior.
Chair with arm
removed for ease of
side transfer
The Chepstow range
of hospital chairs are
available with deep
comfortable removable
cushions which allow for
easy cleaning or the use
of optional pressure care
cushioning.
Various sizes are available.
Chair in rise position.
The Variable Angle Lift
gives optional 10-30
degree positions
Rear castors
are braked
All primacare chairs can be
specified with a full hazard
sensor strip around the
bottom of the chair. When
a hazard is encountered the
motor stops immediately
and reverses a short
distance.
All primacare chairs can be made with a
removable quilt and removable seat module.
This enables the easy change to different
cushioning options as shown in the picture.
Neck Pillow
Mobile, hoist friendly, electric rise
and recline chair including a drop
down footboard as standard.
Arm protectors - scroll arm.
Arm protectors - knuckle arm.
Head Cushion
Profile head cushion
Electric Seat Retraction (ESR)
House
keeping
wheels
Drop arm
Standard size (with
options) in Voyage
Indigo
Height
adjustable
legs
All chairs can be supplied with a Drop Arm
which is locked in the upper position and
released by a lever. The Arm drops below
the seat height for ease of side transfer.
Extended
Retracted
Normal sitting
position
High raised
position for easy
entry and exit
Reclined position Semi-reclined
Normal sitting
position
High raised
position for easy
entry and exit
A quiet smooth recline action with a zero gravity no shear
motion. The powerful 6kn motor lifts with a 'tilt in space'
motion. This action has three manually adjusted pivot
positions allowing the chair to rise as shown or to a near
horizontal rise position.
The action reclines smoothly with its single motor moving
the chair seat forward as the back reclines. This enables the
chair to be placed within 3" (75mm) of a wall and recline
perfectly. The powerful 6kn motor lifts to a full height exit
position.
Single motor 3-Way action
Wall-hugger Tilt-In-Space
Reclined position Semi-reclined
primacare offer a wide range of accessories
available in all fabrics. Below are shown our
range of soft fibre filled accessories which can be
produced in fabrics to complement or contrast
your chosen chair.
Lap belt
•Optional full battery back
up with freedom pack.No
wires and up to 80 cycles
between recharges
•Various foam/gel seating
options possible. Available
in any fabric
Single motor Wall-hugger
Seating Experts in Assistive Technology
Range C: Severe Contract hard wearing fabrics
and waterproof anti-microbial anti-MRSA
fabrics to CRIB5 fire retardant standards.
Specialist: primacare can offer any chair in
upgraded fabric from ranges and manufacturers
such as, Panaz, Boltaflex, CTP, Microcare,
Panvelle Stretch and Vyflex.
Leather: All primacare chairs can be made in soft
leather in a wide choice of colours.
Foams and fillings
10 motor
massage &
heat pad system
When using pressure relieving
cushions we advise using a thin
layer VP quilt to hold the cushion
in place
Drop
arm
option
Riser Porter
Optional key lock handset
allows the carer to safely
immobilise the chair
Removable seat
Petite size
in Voyage
Hyacinth
Single motor Tilt-In-Space
Range B: Choice of 80+ General Domestic fabrics
available to order in approximately three weeks.
Hospital chairs
Chair reclined
showing high
leg lift
Model shown in Zest
Lime with Black VP
cushions
Bariatric
Normal sitting
position
High raised
position for easy
entry and exit
A conventional reciliner action where the angle between
back and seat increases as the chair reclines.
actions, control and accessories
Porter / Mobile reclining chairs
Reclined position Semi-reclined
with high leg lift
Normal sitting
position
All standard primacare models use high resilient seat
foams for comfort and long life. Chairs can be specified
with different foam densities for softer seating where
required. We also offer three optional extra seating types.
High raised
position for easy
entry and exit
This action moves the chair forward away from the wall as
the chair tilts in space as it reclines. The benefits of no stress
on the occupant during recline is now possible in a confined
space. The chair needs only be positioned 5” from the wall.
One added benefit of this type of wallhugger action is that
it is extremely stable when in the rise position.
Visco - The combination of high density, high resilient foam base
and visco elastic heat sensitive foam surface is idea for pressure
reducing cushions.
PrimaGel* - This cushion uses combustion modified high resilient
foam with a profiled upper surface to increase pressure distribution,
encasing a silicon gel sac, which dissipates pressure in high areas of
loading.
Visco
Dual motor standard action
Dual motor Tilt-In-Space
Visco heat
sensitive foam
Reclined position Semi-reclined,
Normal sitting
with independent position
control of back
& leg rests for
maximum comfort
High raised
position for easy
entry and exit
A conventional reciliner action where the angle between
back and seat increases as the chair reclines.
Max weight 20 stone (127 kg).
2 year warranty on action & motor
Reclined position Semi-reclined,
Normal sitting
with independent position
control of back &
leg rests
High raised
position for easy
entry and exit
PrimaGel
Reclined position Tilt Back position. Normal sitting
Footrest can be position. Like
up or down
a normal dual
action there is
independent
control of back
This action allows the
and leg rests
This action allows for individual adjustment of the back
angle position, but allows the recline motion to operate in a
tilt-in -space motion with no change to the seat/back angle
during the recline movement. This ensures a comfortable
no-shear feeling.
operator to individually
control each motor.
Altering the pin
30º seat incline,
position on both front of chair
sides of the action rises 5”
changes the angle
of rise
20º seat incline,
front of chair
rises 8”
*Trade name of STM Healthcare - Division of Recticel Ltd.
Air Cushion
Variable angle lift (VAL)
Rise position. The
action has 5” of
vertical rise but
can continue to
a normal tilted
rise position (not
shown)
Seat cut out - all chairs can be supplied with a seat cut out to
enable the use of special seat cushion inserts, for example an air
cushion. Fabric covered foam insert supplied with all chair seat cut
outs.
Coolgel - This is a Proprietary Silicone Polymer designed to have the
same physical characteristics as human fat tissue. The softness stays
unchanged at any temperature. The polymer is a solid and will not
flow or leak if punctured.It is Hypoallergenic- it does not contain
latex or isocyanates.It is odourless and the cellular design allows air
to circulate between the cells to minimize heat and moisture build
up.An even pressure distribution contours to the underlying surface.
PrimaGel+
BLT (Back, Leg rest & lift, Tilt)
PrimaGel+*- This cushion combines combustion modified high
resilient foam with visco elastic heat sensitive foam and silicon gel to
provide unrivalled pressure distribution.
10º seat incline,
front of chair
rises 11”
Many standard height tilt-in-space actions can be supplied
with variable angle lift.
Dynamic pressure relief seat
cushion and pump.
• 6 cell dynamic cushion.
• 9 min 36 second, 2 cell cycle
• maximum weight 19 stone, 121kgs.
Coolgel
electric rise and recline chairs
Denbigh single motor
standard chair in Caledonian
Patchwork Rose (range B)
1
Contemporary comfort styled arm with
a waterfall style back, full chaise, full
length pocket and control loop giving
excellent support and comfort.
Brecon single motor
standard chair in
Montana Floral
Oatmeal (range B)
Modern styling for this new addition
to the primacare range
Aberdare
Solid wood arm knuckles on
this neat design combine with
the deep buttoned back giving
excellent lumbar and head
support. Full chaise footrest
and padded wings complete
this design.
Worcester
Seating Experts in Assistive Technology
Scroll arms and full chaise footrest are
complemented with a three pillow
waterfall back. Each luxurious fibre filled
cushion is adjustable vertically to give
added comfort options.
Stratford
Traditional styling with a
profile firm back
All primacare two and three seater
sofa’s are made with removable backs
for ease of delivery and adjustability. All
sofa’s can be specified with softer foam,
different seat heights and back angles.
Stratford profile
back compact dual
tilt in space model
in Chartwell
Celadon diamond
/ plain fabric
range B
Lampeter
Contemporary styled model with a large fibre filled
back cushion and separate lumbar cushion
Worcester standard dual
motor chair in Carnaby
Weave Teracotta fabric
(range B)
Brecon
Aberdare single motor standard
chair in Camden Uni / Leaf Wheat
(range B)
Classic scroll arms and full chaise footrest combine
with a deep buttoned back giving excellent lumbar
and head support.
Malvern two seater sofa
(40” between arms) in
Carnaby Weave Wine
fabric (range B)
chairs can be specified
with dark knuckles or
natural colour option
4
Primacare supply 4 lateral support back cushion variations,
each having the general appearance as shown.
1 One piece back with attached laterals.
2 Two piece back with seperate upper waterfall cushion.
3 One piece back with seperate laterals attached with Velcro.
4 Two piece back with central split.
Malvern
Conway
3
Lateral support
Ferndale
Conway single motor standard
chair in Montana Brushstrokes Mint
(range B)
2
Ledbury
This model combines an elegant wing design with
3 waterfall back cushions-each with separate vertical
adjustment. The seating area with t-cushion design
gives superior comfort with a less enclosed style.
Ledbury single motor
petite TIS chair in
Summer Sand fabric
(range B)
Lampeter dual motor standard chair
in Vintage Stone fabric (range B)
Soft luxurious fibre filled button back
gives excellent comfort.
Two seater sofa
Worcester Sofa shown is a twin dual TIS rise and
recline sofa with 2 drop arms. Model shown in
Canterbury Wine fabric (range B)
chair styles
Opera
Alternative
waterfall back
option is the
Oxford style
Seat
height
Seat
width
Seat
depth
Evesham single motor
standard chair in Virginia
Floral Beige fabric (range B)
Evesham
Similar in design to our popular
Brecon model but with an
elegant wing design and a larger
head cushion.
Warwick
high back chairs
Pershore
This model uses
the Evesham frame
but with even
size waterfall back
cushions
Available with a
choice of three seat
heights and two back
heights in any of over
100 fabrics in the
primacare range
Pershore Wallhugger
standard chair in
Kendal Leaf Honey
Back
height
Arm
height
Seat
height
range
Seat
width
range
Seat
depth
range
Back
height
range
Arm
height
range
20
9
TIS
N
Junior petite single
14.5
18
18
27
7
14.5-15.5
16-24
16-22
24-33
2-10
20
9
TIS
N
Petite single
16
18
18
27
7
16-17.5
16-24
16-22
24-33
2-10
25
9
TIS
N
Petite single
16
18
18
27
7
16-17.5
16-24
16-22
24-33
2-10
20
9
TIS
N
Single TIS
18/19
18/20
18/20
27/30
7
18-23
16-24
16-22
24-36
2-10
20
9
TIS
Y
Single TIS
18/19
18/20
18/20
27/30
7
18-23
16-26
16-22
24-36
2-10
25
9
TIS
Y
Standard single TIS
19
20
20
30
7
19-23
18-32
16-22
24-36
2-10
35
9
TIS
N
Standard single TIS
19
20
20
30
7
19-23
20-32
16-22
24-36
2-10
15
9
WHTIS
N
Wall hugger Tilt in Space
16
18
18
27
7
16-18
16-20
16-22
24-33
2-10
20
9
WHTIS
N
Wall hugger Tilt in Space
19
20
20
30
7
18.5-22
18-24
16-22
24-33
2-10
25
9
WHTIS
Y
Wall hugger Tilt in Space
19
20
20
30
7
18.5-22
18-30
16-22
24-33
2-10
25
7
WH
N
Wall hugger Heavy Duty
19
20
20
30
7
19-23
20-24
18-22
24-36
2-10
20
9
3 way
N
Petite single 3 way
16
18
18
27
7
16-17.5
18-24
16-22
24-33
2-10
20
9
3 way
N
Single 3 way
18/19
18/20
18/20
27/30
7
18-23
16-24
16-22
24-36
2-10
20
9
3 way
N
Standard single 3 way
19
20
20
30
7
19-23
18-24
16-22
24-36
2-10
25
9
3 way
N
Standard single 3 way
19
20
20
30
7
19-23
20-30
16-22
24-36
2-10
35
9
3 way
N
Standard single 3 way
19
20
20
30
7
19-23
20-30
16-22
24-36
2-10
20
9
Dual TIS
N
Junior petite dual TIS
15
18
18
27
7
14.5-15.5
16-26
16-22
24-33
2-10
20
9
Dual TIS
N
Petite dual TIS
16
18
18
27
7
16-17.5
16-26
16-22
24-33
2-10
25
9
Dual TIS
N
Petite dual TIS
20
9
Dual TIS
N
Dual TIS
25
9
Dual TIS
Y
35
9
Dual TIS
40
9
Dual TIS
20
9
25
20
20
16
18
18
27
7
16-17.5
16-26
16-22
24-33
2-10
18/19
18/20
18/20
27/30
7
18-23
16-24
16-22
24-36
2-10
Standard dual TIS
19
20
20
30
7
19-23
20-30
16-22
24-36
2-10
N
Standard dual TIS
19
20
20
30
7
19-23
20-30
16-22
24-36
2-10
N
Standard dual TIS
19
26
20
30
7
19-23
22-32
18-24
24-36
2-10
Dual
N
Petite dual
16
18
18
27
7
16-17.5
18-24
16-22
24-33
2-10
9
Dual
N
Petite dual
16
18
18
27
7
16-17.5
20-24
16-22
24-33
2-10
9
Dual
N
Compact dual
18
18
18
27
7
18-18.5
18-24
16-22
24-36
2-10
9
Dual
N
Standard dual
19
20
20
30
7
19-23
18-24
16-22
24-36
2-10
25
9
Dual
Y
Standard dual
19
20
20
30
7
19-23
20-30
16-22
24-36
2-10
40
9
Dual
N
Compact dual
17
26
20
30
7
17-23
22-30
18-24
24-36
2-10
40
9
Dual
N
Standard dual
19
26
20
30
7
19-23
22-32
18-24
24-36
2-10
40
22
Dual
N
Standard dual heavy leg
19
24
20
30
7
19-23
22-30
18-24
24-36
2-10
50
13
Dual
N
Standard dual
19.5
30
20
30
7
19-23
26-32
18-24
24-36
2-10
70
22
Dual
N
Standard dual
19.5
34
20
30
7
19-23
32-34
18-24
24-36
2-10
20
9
BLT(4M)
N
Petite 4 motor
16
18
18
27
7
16-17.5
19-23
16-22
24-36
2-10
20
9
BLT(4M)
N
Compact 4 motor
18
18
18
27
7
18-18.5
19-23
16-22
24-36
2-10
20
9
BLT
N
Standard
19
20
20
30
7
19-23
19-23
16-22
24-36
2-10
25
13
BLT
N
Standard
19
20
26
30
7
19-23
24-32
16-22
24-36
2-10
35
20
BLT
N
Standard
19
20
26
30
7
19-23
24-32
16-22
24-36
2-10
Warwick
Fixed high back chair
18
20
20
30
7
18-22
n/a
n/a
n/a
n/a
Chepstow
Fixed high back chair
19
20
20
30
7
16-20
18-25
16-22
28-34
7-9
*Lampeter model available with wallhugger and dual actions only.
Within the Lampeter range are a two seater sofa
(56” wide) and a three seater sofa (78” wide)
Luxurious modern
style with soft
padded arms
and a superb soft
profile back.
Description
bh - back height
from the seat height at the back of the
seat to a line parallel with the seat using
a straight edge of the uncompressed
top of the uppermost cushion.
Please ensure that your order includes:•Size
•Model name
•Choice of wood colour
•Fabric name •Mechanism type •Optional extras
Your local primacare distributor is:-
ah - arm height
using a straight edge on top of the arms
at a point 10” back from the front of
the chair take the dimension down to
the middle of the uncompressed seat.
sd - seat depth
from front of chair seat to
uncompressed lumbar back cushion
sw - seat width
width of chair between arms at a point
10” back from the front of the seat
sh- seat height
to top of uncompressed seat from floor
April 2015
Malvern standard
single motor 3-way
chair in Carnaby
Weave Wine fabric
(range B)
Actions and Dimensional Range for all Primacare chair styles*
Standard dimensions (inches)
VAL
Ferndale single motor
standard chair in
Richmond Jade fabric
(range B)
Solid wood arm knuckles with a three
tier waterfall back, full chaise footrest and
padded wings complete this design.
Leg rest
weight
Max weight
Denbigh
Mechanism
Specifications
tel: 01685 845900 fax: 01685 844538
www.primacare.co.uk [email protected]