Metal Processing Products Catalog

Transcription

Metal Processing Products Catalog
Shinx Corporation Co., Ltd.
1
31
Delivering high-quality Shinx
plates in any size and in any
lot size.
Contents
Aluminum Plates
In Permanent Stock
Shinx is one of Japan’s leading manufacturers of aluminum
and stainless steel plates. Its mission is to deliver high quality
and reasonably priced materials to customers around the
world, even responding to orders for a single small piece.
A5052P
5
Stainless steel
Four-face processing range: from a minimum of 5 mm x 5 mm to a maximum of 1,500 mm x 1,550 mm
Six-face processing range: from a minimum of 5 mm x 5 mm to a maximum of 1,000 mm x 1,550 mm
• An abundance in stock secured with the help of major material manufacturers in Japan to respond to
large-lot orders.
9
304/303
12
Milling of Rolled Copper Products
14
Processing Range Chart
15
Processing Accuracy Standards
18
Blanking
22
Side Tapping
27
Stainless Steel Surface Grinding
28
Special Form Cutting for Aluminum
29
Irregular shape cutting with a stainless steel band saw
30
About Shinx
31
Stainless Steel Plates
for Eye Bolts
An abundance in stock
A7075P
11
• Processing more than 10,000 plates per day.
• Dimensional accuracy in milling is on the order of hundredths of a millimeter. Stability is unparalleled
with limited dimensional variation.
• Guaranteed values for flatness, parallelism, and squareness are set on a full-scale basis according to
product size.
• Comprehensive quality control is in place to minimize scratches, dents, and stains.
7
A5056
Japan’s top-class plate supply capacity
Stability in quality and precision
A2017P
Aluminum Round Bars
Japan’s top-class processing range
Aluminum
Four-face processing range: from a minimum of 5 mm x 5 mm to a maximum of 1,520 mm x 3,047 mm
Six-face processing range: from a minimum of 5 mm x 5 mm to a maximum of 1,520 mm x 2,520 mm
3
Delivering orders to customers around the world in the shortest possible period of time
• A variety of surface and air delivery services are available.
1
31
2
31
Non-heat treated aluminum-magnesium alloy.
The most common medium strength alloy with superior corrosion
resistance, weldability and moldability.
Excellent fatigue strength compared to normal strength and
outstanding seawater resistance.
A5052P
Four-face milling
In-Stock List
Four-face milling
Refining
Plate thickness (mm) Base material: width x length (mm)
30
32
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
150
1
1,000×2,000
1,250×2,500
H34
1,250×2,500
1,525×3,050
H112
Refining
Plate thickness (T)
Finished width (W)
Finished length (L)
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1520.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1520.00
15.00 ~ 19.99
20.00 ~ 1520.00
20.00 ~ 1520.00
30.00 ~ 1520.00
40.00 ~ 1247.00
100.00 ~ 1247.00
100.00 ~ 1247.00
100.00 ~ 997.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 3047.00
5.00 ~ 650.00
8.00 ~ 2280.00
20.00 ~ 3047.00
15.00 ~ 2280.00
20.00 ~ 3047.00
20.00 ~ 3047.00
30.00 ~ 3047.00
40.00 ~ 3047.00
100.00 ~ 3047.00
100.00 ~ 2497.00
100.00 ~ 2497.00
Finished thickness (T)
Finished width (W)
Finished length (L)
2.00 ~ 2.49
2.50 ~ 2.99
5.00 ~ 50.00
5.00 ~ 146.00
5.00 ~ 100.00
100.01 ~ 146.00
146.01 ~ 390.00
5.00 ~ 7.99
8.00 ~ 100.00
100.01 ~ 390.00
8.00 ~ 390.00
390.01 ~ 1150.00
10.00 ~ 390.00
390.01 ~ 1150.00
10.00 ~ 1150.00
1150.01 ~ 1520.00
10.00 ~ 1150.00
1150.01 ~ 1520.00
20.00 ~ 100.00
100.01 ~ 1520.00
30.00 ~ 120.00
120.01 ~ 1520.00
30.00 ~ 130.00
130.01 ~ 1520.00
50.00 ~ 150.00
150.01 ~ 1247.00
100.00 ~ 150.00
150.01 ~ 1247.00
5.00 ~ 100.00
5.00 ~ 150.00
5.00 ~ 650.00
100.01 ~ 600.00
146.01 ~ 460.00
5.00 ~ 650.00
8.00 ~ 1690.00
100.01 ~ 700.00
8.00 ~ 2280.00
390.01 ~ 1250.00
10.00 ~ 2280.00
390.01 ~ 1690.00
10.00 ~ 2280.00
1150.01 ~ 1690.00
10.00 ~ 2520.00
1150.01 ~ 2280.00
20.00 ~ 3047.00
100.01 ~ 2520.00
30.00 ~ 3047.00
120.01 ~ 2520.00
30.00 ~ 3047.00
130.01 ~ 2520.00
50.00 ~ 3047.00
150.01 ~ 2520.00
100.00 ~ 3047.00
150.01 ~ 2520.00
100.00 ~ 997.00
100.00 ~ 2497.00
1, 1.5, 2, 2.5, 3, 4
5, 6, 7
8, 10, 12, 15, 16, 18
1,525×3,050
20, 22, 25, 28, 30
H112
32, 35, 40, 45, 50
55, 60
65, 70, 75, 80, 85, 90, 95, 100
110, 120
130
150
1,250×3,050
Six face milling
1,250×2,500
1,000×2,500
The zone colored in [ ] represents the range covered by the ALJADETM-II.
3.00 ~ 4.99
5.00 ~ 7.99
Plate thickness tolerance (mm)
Plate thickness
Tolerance
1
±0.10
1.5 ~ 3
±0.13
4~6
±0.08
7 ~ 12
±0.10
15
±0.15
16 ~ 20
±0.20
22 ~ 35
±0.30
40 ~ 45
±0.40
Plate thickness
Tolerance
55
±0.75
60 ~ 70
±0.95
75
±1.15
80 ~ 100
±1.40
110
±1.50
120
±1.55
130
±1.65
150
±1.90
* Kobe Steel’s ALJADE -II represents significant improvements from the
conventional ALJADETM in both surface flatness and plate thickness tolerance,
yet has reduced residual stress.
It has been developed as an evolution from the ALJADETM.
50
±0.50
8.00 ~ 9.99
10.00 ~ 12.99
13.00 ~ 14.99
TM
The zone colored in [ ] represents the range covered by the ALJADETM-II.
15.00 ~ 19.99
20.00 ~ 29.99
30.00 ~ 46.00
The ALJADETM-II flatness: Plate thickness of 4-50 mm : 0.4 mm/M
46.01 ~ 56.00
56.01 ~ 100.00
Cutting range and cutting dimension tolerance (mm)
Cutting
Base metal size
1,525×3,050
Quadrilateral
1,000×2,000 1,000×2,500
cutting
1,250×2,500 1,250×3,050
3
31
Cutting range
MIN 10×15
MAX 1,525×3,050
A5052P
1.5
2
2.5
3
4
5
6
7
8
10
12
15
16
18
20
22
25
28
Six face milling
100.01 ~ 116.00
Cutting dimension tolerance
10×15 ~ 100×100
Other than above
-0 ~ +1
-0 ~ +2
116.01 ~ 146.00
(Finished up to 149.5 depending on the size)
* Any plate with thickness exceeding that specified above can be provided as a custom-made item. Please contact us for details.
4
31
Kobe Steel’s high-quality brand of A5052P non-heat treated
aluminum-magnesium alloy cut plates
In addition to the characteristics of the A5052P, it features
minimized residual stress and a very low level of strain after
cutting.
Four-face milling
In-Stock List
Four-face milling
4
5
6
8
10
12
15
16
18
Refining
1,250×2,500
20
22
25
30
35
40
45
50
H112
1,525×3,050
Refining
Plate thickness (T)
4
1,525×3,050
H112
5, 6
8, 10, 12, 15, 16, 18
20, 22, 25, 30
35, 40, 45, 50
Plate thickness
Tolerance
4~6
±0.04
8 ~ 12
±0.05
15 ~ 16
±0.08
18
±0.09
20 ~ 22
±0.10
25
±0.12
30 ~ 35
±0.15
40 ~ 45
±0.20
50
±0.25
Plate thickness tolerance: 1/10 of the JIS
specified value
3.00 ~ 4.99
5.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 12.99
13.00 ~ 19.99
20.00 ~ 29.99
Cutting
Base metal size
Quadrilateral 1,525×3,050
cutting
1,250×2,500
5
31
Finished width (W)
Finished length (L)
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1520.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1520.00
15.00 ~ 19.99
20.00 ~ 1520.00
20.00 ~ 1520.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 3047.00
5.00 ~ 650.00
8.00 ~ 2280.00
20.00 ~ 3047.00
15.00 ~ 2280.00
20.00 ~ 3047.00
20.00 ~ 3047.00
Finished width (W)
Finished length (L)
5.00 ~ 100.00
100.01 ~ 390.00
5.00 ~ 7.99
8.00 ~ 390.00
390.01 ~ 700.00
8.00 ~ 390.00
390.01 ~ 1150.00
5.00 ~ 650.00
100.01 ~ 1100.00
5.00 ~ 650.00
8.00 ~ 1690.00
390.01 ~ 1100.00
8.00 ~ 2280.00
390.01 ~ 1690.00
10.00 ~ 390.00
390.01 ~ 1150.00
1150.01 ~ 1520.00
10.00 ~ 1520.00
20.00 ~ 100.00
100.01 ~ 1520.00
10.00 ~ 2280.00
390.01 ~ 1690.00
1150.01 ~ 1520.00
10.00 ~ 2520.00
20.00 ~ 3047.00
100.01 ~ 2520.00
30.00 ~ 120.00
120.01 ~ 1520.00
30.00 ~ 3047.00
120.01 ~ 2520.00
Six face milling
* Kobe Steel’s ALHIGHCETM-III minimizes residual stress with its unique heat treatment. Its strain after cutting is reduced to a very low level.
The surface testing method has been exhaustively improved to drastically enhance the level of quality control on both sides of the plate. Superb
accuracy in plate thickness is attained with its outstanding rolling technology.
High quality is ensured by means of stringent quality inspection implemented for every single plate.
Flatness
0.2 mm/M or less
Six face milling
Cutting range
MIN 10×15
MAX 1,525×3,050
30.00 ~ 46.00
10×15 ~ 100×100
Other than above
-0 ~ +1
-0 ~ +2
6
31
Heat treated aluminum-copper alloy
With a high copper content, it is poor in corrosion resistance but so
excellent in strength that it is used as structural materials in addition
to forging materials.
A2017P
In-Stock List
Four-face milling
Refining
T3
T351
40
1,250×3,050
45
50
55
60
65
1,250×2,500
70
80
90
100
Refining
Plate thickness (T)
Finished width (W)
Finished length (L)
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
15.00 ~ 19.99
20.00 ~ 1247.00
20.00 ~ 1247.00
20.00 ~ 1247.00
30.00 ~ 1247.00
40.00 ~ 1247.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 3047.00
15.00 ~ 1690.00
20.00 ~ 3047.00
20.00 ~ 3047.00
20.00 ~ 2497.00
30.00 ~ 2497.00
40.00 ~ 2497.00
Finished width (W)
Finished length (L)
2.00 ~ 2.49
2.50 ~ 2.99
3.00 ~ 4.99
5.00 ~ 50.00
5.00 ~ 146.00
5.00 ~ 146.00
5.00 ~ 7.99
8.00 ~ 100.00
100.01 ~ 193.00
193.01 ~ 304.00
8.00 ~ 304.00
304.01 ~ 560.00
10.00 ~ 560.00
560.01 ~ 815.00
10.00 ~ 815.00
815.01 ~ 1150.00
10.00 ~ 1150.00
1150.01 ~ 1247.00
20.00 ~ 100.00
100.01 ~ 390.00
390.01 ~ 815.00
815.01 ~ 1247.00
30.00 ~ 120.00
120.01 ~ 1247.00
30.00 ~ 1247.00
5.00 ~ 100.00
5.00 ~ 150.00
5.00 ~ 600.00
5.00 ~ 600.00
8.00 ~ 1250.00
100.01 ~ 700.00
193.01 ~ 600.00
8.00 ~ 1690.00
304.01 ~ 1000.00
10.00 ~ 1690.00
560.01 ~ 815.00
10.00 ~ 1690.00
815.01 ~ 1150.00
10.00 ~ 1690.00
1150.01 ~ 1250.00
20.00 ~ 3047.00
100.01 ~ 2520.00
390.01 ~ 2280.00
815.01 ~ 1690.00
30.00 ~ 3047.00
120.01 ~ 2520.00
30.00 ~ 2497.00
50.00 ~ 1247.00
50.00 ~ 2497.00
3, 4, 5, 6
T351
8, 10, 12, 15
20, 25, 30
35, 40
45, 50
55, 60
65, 70, 80, 90, 100
Six face milling
Plate thickness
Tolerance
3
±0.13
4~5
±0.21
6
±0.30
8
±0.20
10
±0.30
12
±0.35
15
±0.45
20
±0.55
Plate thickness
Tolerance
25
±0.60
30
±0.65
35
±0.70
40
±0.80
45
±0.85
50
±1.0
55
±1.30
60 ~ 100
±1.40
5.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 12.99
Cutting
Base metal size
Quadrilateral 1,250×2,500
cutting
1,250×3,050
A2017P
3
4
1,250×2,500
5
6
8
10
12
15
1,250×3,050
20
25
30
35
Cutting range
MIN 10×15
MAX 1,250×3,050
13.00 ~ 14.99
10×15 ~ 100×100
Other than above
15.00 ~ 19.99
-0 ~ +1
-0 ~ +2
20.00 ~ 29.99
30.00 ~ 36.00
36.01 ~ 56.00
56.01 ~ 96.00
7
31
8
31
Heat treated aluminum-zinc-magnesium alloy.
It is one of the alloys with the greatest strength among the
aluminum alloys although it is poor in corrosion resistance.
A7075P
In-Stock List
Four-face milling
8.5
10.5
12.5
15.5
20.5
25.5
30.5
35.5
Refining
1,250×2,500
41
46
51
56
61
71
81
T651
Refining
Plate thickness (T)
Finished length (L)
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
15.00 ~ 19.99
20.00 ~ 1247.00
20.00 ~ 1247.00
30.00 ~ 1247.00
40.00 ~ 1247.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
15.00 ~ 1690.00
20.00 ~ 2497.00
20.00 ~ 2497.00
30.00 ~ 2497.00
40.00 ~ 2497.00
Finished width (W)
Finished length (L)
2.00 ~ 2.49
2.50 ~ 2.99
3.00 ~ 4.99
5.00 ~ 50.00
5.00 ~ 146.00
5.00 ~ 146.00
5.00 ~ 7.99
8.00 ~ 100.00
100.01 ~ 193.00
193.01 ~ 304.00
5.00 ~ 100.00
5.00 ~ 150.00
5.00 ~ 600.00
5.00 ~ 600.00
8.00 ~ 1250.00
100.01 ~ 700.00
193.01 ~ 600.00
8.00 ~ 304.00
304.01 ~ 560.00
10.00 ~ 815.00
10.00 ~ 1150.00
1150.01 ~ 1247.00
10.00 ~ 390.00
390.01 ~ 1247.00
20.00 ~ 390.00
390.01 ~ 815.00
815.01 ~ 1247.00
30.00 ~ 1247.00
8.00 ~ 1690.00
304.01 ~ 1000.00
10.00 ~ 1690.00
10.00 ~ 1690.00
1150.01 ~ 1250.00
10.00 ~ 2280.00
390.01 ~ 1690.00
20.00 ~ 2497.00
390.01 ~ 2280.00
815.01 ~ 1690.00
30.00 ~ 2497.00
50.00 ~ 1247.00
50.00 ~ 2497.00
3, 4, 5, 6
(In stock for milling)
1,250×2,500
T651
8.5, 10.5, 12.5, 15.5
20.5, 25.5, 30.5
35.5, 41, 46, 51
56, 61
71, 81
A7075P
Finished width (W)
Six face milling
Plate thickness
Tolerance
8.5
-0 ~ +0.82
10.5 ~ 15.5
-0 ~ +1.0
20.5
-0 ~ +1.14
25.5
-0 ~ +1.24
30.5
-0 ~ +1.36
35.5
-0 ~ +1.46
Plate thickness
Tolerance
41
-0 ~ +1.58
46
-0 ~ +1.68
51
-0 ~ +1.8
56
-0 ~ +1.92
61 ~ 71
-0 ~ +2.14
81
-0 ~ +2.3
5.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 12.99
13.00 ~ 14.99
15.00 ~ 19.99
Cutting
Base metal size
Quadrilateral
1,250×2,500
cutting
Cutting range
MIN 10×15
MAX 1,250×2,500
10×15 ~ 100×100
Other than above
-0 ~ +1
-0 ~ +2
20.00 ~ 29.99
30.00 ~ 56.00
56.01 ~ 77.00
9
31
10
31
A5056 Round Bar
Non-heat treated aluminum-magnesium alloy.
With a high level of corrosion resistance, it
features a good surface finish after cutting. It
boasts excellence in anodizability and in dye
affinity.
In-Stock List
Exterior diameter (mm)
Refining
Length (mm)
Exterior diameter (mm)
Refining
Length (mm)
* 10
120
* 11
125
* 12
130
* 13
135
* 14
140
* 15
145
* 16
150
* 17
155
* 18
160
* 19
165
20
170
22
175
25
180
H112
28
185
H34
30
190
32
200
35
210
36
220
38
230
2,000
2,000
40
240
42
250
45
260
48
270
50
280
52
290
55
300
60
310
320
65
70
330
75
340
80
350
F
85
360
90
370
H112
Casting and facing
95
380
100
400
105
420
110
450
115
480
An asterisk (*) indicates that the item is not available in custom length. However, it is delivered in minimum quantities of one piece.
Exterior dimension tolerance (mm)
Exterior diameter
Tolerance
10 ~ 12
-0.06 ~ +0
13 ~ 25
-0.07 ~ +0
28 ~ 38
-0.10 ~ +0
40 ~ 50
-0.14 ~ +0
52 ~ 60
±0.105
65 ~ 100
-0.61 ~ +0.91
Exterior diameter
Tolerance
105 ~ 150
-0.86 ~ +1.3
155 ~ 200
-1.12 ~ +1.68
210 ~ 220
-1.37 ~ +2.06
230 ~ 270
±2.6
280 ~ 300
±3.3
310 ~ 480
-2.0 ~ +3.0
Cutting range
MIN 10L (Diameter of ø 100 or less)
MIN 8L (Diameter of more than ø 100)
MAX 2000L
11
31
Diameter of ø 150 or less and length of 300 or less -0 ~ +1
Other than above
-0 ~ +2
Stainless Steel
SUS304: Austenitic stainless steel
It is typical 18Cr-8Ni stainless steel with a low carbon content
supporting a high level of corrosion resistance and weldability.
SUS303: Austenitic stainless steel
It is 18Cr-8Ni high sulfur stainless steel added with sulfur and
phosphorus for superb machinability.
In-Stock List
Four-face milling
4
Plate thickness (mm)
JIS
Code
5
6
8
9 10 12 14 15 16 18 19 20 22 25 28 30 32 35 38 40 45 50 55 60 65
304
SUS304HP-NO1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
303
SUS303HP-NO1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
SUS303/303 annealed plates
Plate thickness (T)
5.00 ~ 150.00
8.00 ~ 550.00
10.00 ~ 1550.00
6.00 ~ 550.00
10.00 ~ 1550.00
12, 14, 15, 16, 18, 19, 20
10.00 ~ 1500.00
10.00 ~ 1550.00
22, 25, 28, 30
32, 35, 38, 40, 45, 50
55, 60, 65
15.00 ~ 1500.00
25.00 ~ 1500.00
40.00 ~ 1500.00
15.00 ~ 1550.00
25.00 ~ 1550.00
40.00 ~ 1550.00
6, 8, 9, 10
Plate thickness dimension tolerance for SUS304 Plates
* Table 1 shows the basic tolerance, although the tolerance shown in Table 2 may apply depending on the base material procured.
[Table 1]
Plate thickness
Tolerance
5
±0.6
6
±0.7
8~9
±0.65
10 ~ 15
±1.2
16 ~ 38
±1.3
40 ~ 60
±1.4
65
±1.5
Finished width (W) Finished length (L)
5.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 1500.00
6.00 ~ 9.99
10.00 ~ 1500.00
4, 5
Plate thickness (T)
Finished width (W) Finished length (L)
5.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 1500.00
6.00 ~ 9.99
10.00 ~ 1500.00
5.00 ~ 150.00
8.00 ~ 550.00
10.00 ~ 1550.00
6.00 ~ 550.00
10.00 ~ 1550.00
12, 14, 15, 16, 18, 19, 20
10.00 ~ 1500.00
10.00 ~ 1550.00
22, 25, 28, 30
32, 35, 38, 40, 45, 50
55, 60, 65
15.00 ~ 1500.00
25.00 ~ 1500.00
40.00 ~ 1500.00
15.00 ~ 1550.00
25.00 ~ 1550.00
40.00 ~ 1550.00
5
6, 8, 9, 10
[Table 2]
Plate thickness
5
6
8 ~ 15
16 ~ 38
40 ~ 60
65
Tolerance
-0.25 ~
+1.55
-0.25 ~
+1.75
-0.25 ~
+2.15
-0.25 ~
+2.35
-0.25 ~
+2.55
-0.25 ~
+2.75
Six face milling
Plate thickness dimension tolerance for SUS303 Plates
* Table 1 shows the basic tolerance, although the tolerance shown in Table 2 may apply depending on the base material procured.
[Table 1]
Plate thickness
4~5
6
8~9
10 ~ 15
16 ~ 22
25 ~ 38
40
45 ~ 60
65
Tolerance
-0.25 ~
+0.8
-0.25 ~
+0.95
-0.25 ~
+1.05
-0.25 ~
+1.15
-0.25 ~
+1.35
-0.25 ~
+1.55
-0.25 ~
+1.75
-0.25 ~
+1.8
-0.25 ~
+2.15
4
±0.45
5
±0.55
6~9
±0.65
10 ~ 15
±0.7
16 ~ 22
±0.8
25 ~ 38
±0.9
40 ~ 60
±1.0
65
±1.2
Cutting
Quadrilateral
cutting
Finished thickness (T) Finished width (W) Finished length (L)
Finished thickness (T) Finished width (W) Finished length (L)
2.00 ~ 2.99
15.00 ~ 19.99
20.00 ~ 29.99
5.00 ~ 50.00
5.00 ~ 7.99
8.00 ~ 150.00
5.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 350.00
5.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 350.00
6.00 ~ 7.99
8.00 ~ 350.00
8.00 ~ 49.99
50.00 ~ 1000.00
10.00 ~ 49.99
50.00 ~ 1000.00
15.00 ~ 1000.00
20.00 ~ 1000.00
5.00 ~ 150.00
5.00 ~ 150.00
8.00 ~ 800.00
5.00 ~ 150.00
8.00 ~ 800.00
150.01 ~ 400.00
5.00 ~ 300.00
8.00 ~ 800.00
150.01 ~ 400.00
6.00 ~ 500.00
8.00 ~ 800.00
8.00 ~ 800.00
50.00 ~ 1200.00
10.00 ~ 1000.00
50.00 ~ 1550.00
15.00 ~ 1550.00
20.00 ~ 1550.00
Base metal size
1,030×2,000
1,030×1,524
1,219×2,438
Cutting range
Width
Length
10 or more and less than 15
Up to 550
15 or more and less than 1,000
Up to 1,200
Up to 2,400
1,000 or more and up to 1,200
Up to 2,400
30.00 ~ 49.99
30.00 ~ 1000.00
30.00 ~ 1550.00
50.00 ~ 1000.00
50.00 ~ 1550.00
4.00 ~ 4.99
5.00 ~ 5.99
-0 ~ +2
-0 ~ +3
* Even within the range specified above, cutting may not be possible depending on the plate thickness.
Cutting and Annealing
Reducing the residual stress by 90% to help increase the product precision and curtail the delivery time.
Materials:
3.00 ~ 3.99
[Table 2]
Plate thickness
Tolerance
• SUS303-NO1 (plates) • SUS304-NO1 (plates) * For any item not in stock, please contact us.
Size for heat treatment: • 2000 (W) x 3500 (L) maximum • Milling is available after annealing. (For the processing range, see the following page.)
6.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 14.99
50.00 ~ 61.00
2.00 ~ 2.99
3.00 ~ 3.99
4.00 ~ 4.99
5.00 ~ 5.99
6.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 14.99
15.00 ~ 19.99
20.00 ~ 29.99
30.00 ~ 49.99
50.00 ~ 61.00
5.00 ~ 50.00
5.00 ~ 7.99
8.00 ~ 150.00
5.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 200.00
5.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 250.00
6.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 350.00
8.00 ~ 49.99
50.00 ~ 500.00
10.00 ~ 49.99
50.00 ~ 1000.00
15.00 ~ 49.99
50.00 ~ 1000.00
20.00 ~ 49.99
50.00 ~ 1000.00
30.00 ~ 49.99
50.00 ~ 1000.00
5.00 ~ 150.00
5.00 ~ 150.00
8.00 ~ 650.00
5.00 ~ 150.00
8.00 ~ 800.00
150.01 ~ 200.00
5.00 ~ 300.00
8.00 ~ 800.00
150.01 ~ 250.00
6.00 ~ 500.00
8.00 ~ 800.00
150.01 ~ 600.00
8.00 ~ 800.00
50.00 ~ 1000.00
10.00 ~ 800.00
50.00 ~ 1200.00
15.00 ~ 1000.00
50.00 ~ 1550.00
20.00 ~ 1000.00
50.00 ~ 1550.00
30.00 ~ 1000.00
50.00 ~ 1550.00
50.00 ~ 1000.00
50.00 ~ 1550.00
Heat treatment methods: • Air cooling after heat treatment at 870°C • The heat treatment temperature is customizable.
12
31
13
31
Milling of Rolled Copper Products
List of Products and Dimensions
Material
Oxygen-free copper plates
Tough pitch copper plates
Brass plates
C1020P
C1100P
C2801P
Plate thickness (mm)
Chromium copper plates
5
○
○
○
○
6
8
○
○
○
○
○
○
○
○
10
○
○
○
○
12
○
○
○
15
○
○
○
20
○
○
○
○
22
25
○
○
○
30
○
○
○
35
○
○
○
Four-face milling
Plate thickness (T)
Finished width (W)
Finished length (L)
5.00 ~ 150.00
150.01 ~ 300.00
12.00 ~ 150.00
150.01 ~ 300.00
17.00 ~ 150.00
150.01 ~ 300.00
22.00 ~ 150.00
5.00 ~ 600.00
150.01 ~ 300.00
12.00 ~ 600.00
150.01 ~ 300.00
17.00 ~ 600.00
150.01 ~ 300.00
22.00 ~ 600.00
150.01 ~ 300.00
150.01 ~ 300.00
Finished width (W)
Finished length (L)
3.00 ~ 5.99
6.00 ~ 7.99
5.00 ~ 150.00
5.00 ~ 150.00
5.00 ~ 150.00
150.01 ~ 300.00
10.00 ~ 150.00
150.01 ~ 300.00
20.00 ~ 150.00
150.01 ~ 300.00
30.00 ~ 150.00
150.01 ~ 300.00
5.00 ~ 150.00
5.00 ~ 300.00
5.00 ~ 600.00
150.01 ~ 300.00
10.00 ~ 600.00
150.01 ~ 300.00
20.00 ~ 600.00
150.01 ~ 300.00
30.00 ~ 600.00
150.01 ~ 300.00
1~9
10 ~ 18
20 ~ 30
35
Six face milling
8.00 ~ 9.99
10.00 ~ 19.99
20.00 ~ 29.99
30.00 ~ 31.00
14
31
Six face milling
Four-face milling
Aluminum
Aluminum
Finished length (L)
Plate thickness (T)
1 ~ 2.5
3~4
5~7
8 ~ 18
20 ~ 30.5
35 ~ 41
45 ~ 51
55 ~ 61
65 ~ 100
110 ~ 120
130 ~ 140
150
160 ~ 180
Finished width (W)
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00 ~
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
1247.01 ~ 1520.00
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 1247.00
1247.01 ~ 1520.00
15.00 ~ 19.99
20.00 ~ 1247.00
1247.01 ~ 1520.00
20.00 ~ 1247.00
1247.01 ~ 1520.00
20.00 ~ 1247.00
1247.01 ~ 1520.00
30.00 ~ 1247.00
1247.01 ~ 1520.00
40.00 ~ 1247.00
100.00 ~ 1247.00
100.00 ~ 1247.00
100.00 ~ 997.00
100.00 ~ 540.00
A 5052 P •
A1050 P • A 1100 P
A 5083 P • A 6061 P
A 2017 P
A 2024 P
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 3047.00
20.00 ~ 3047.00
5.00 ~ 650.00
8.00 ~ 2280.00
5.00 ~ 650.00
8.00 ~ 2280.00
20.00 ~ 3047.00
20.00 ~ 3047.00
15.00 ~ 2280.00
15.00 ~ 2280.00
20.00 ~ 3047.00
20.00 ~ 3047.00
20.00 ~ 3047.00
20.00 ~ 3047.00
20.00 ~ 3047.00
20.00 ~ 3047.00
30.00 ~ 3047.00
40.00 ~ 3047.00
100.00 ~ 3047.00
100.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 540.00
Finished length (L)
A 7075 P
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 3047.00
5.00 ~ 650.00
8.00 ~ 1690.00
20.00 ~ 2497.00
15.00 ~ 1690.00
20.00 ~ 3047.00
15.00 ~ 1690.00
20.00 ~ 2497.00
20.00 ~ 3047.00
20.00 ~ 2497.00
20.00 ~ 2497.00
20.00 ~ 2497.00
30.00 ~ 2497.00
30.00 ~ 2497.00
40.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 2497.00
40.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 2497.00
Finished width (W)
A 5052 P •
A 1050 P • A 1100 P
A 5083 P • A 6061 P
A 2017 P
A 2024 P
A 7075 P
2.00 ~ 2.49
2.50 ~ 2.99
5.00 ~ 50.00
5.00 ~ 146.00
5.00 ~ 100.00
100.01 ~ 146.00
146.01 ~ 390.00
5.00 ~ 7.99
8.00 ~ 100.00
100.01 ~ 193.00
193.01 ~ 304.00
304.01 ~ 390.00
390.01 ~ 700.00
8.00 ~ 304.00
304.01 ~ 390.00
390.01 ~ 560.00
560.01 ~ 1150.00
10.00 ~ 390.00
390.01 ~ 560.00
560.01 ~ 815.00
815.01 ~ 1150.00
1150.01 ~ 1520.00
10.00 ~ 815.00
815.01 ~ 1150.00
1150.01 ~ 1247.00
1247.01 ~ 1520.00
10.00 ~ 390.00
390.01 ~ 1150.00
1150.01 ~ 1247.00
1247.01 ~ 1520.00
20.00 ~ 100.00
100.01 ~ 390.00
390.01 ~ 815.00
815.01 ~ 1247.00
1247.01 ~ 1520.00
30.00 ~ 120.00
120.01 ~ 1247.00
1247.01 ~ 1520.00
30.00 ~ 120.00
120.01 ~ 1247.00
1247.01 ~ 1520.00
30.00 ~ 130.00
130.01 ~ 1247.00
1247.01 ~ 1520.00
50.00 ~ 150.00
150.01 ~ 1247.00
100.00 ~ 150.00
150.01 ~ 1247.00
100.00 ~ 997.00
5.00 ~ 100.00
5.00 ~ 150.00
5.00 ~ 650.00
100.01 ~ 600.00
146.01 ~ 460.00
5.00 ~ 650.00
8.00 ~ 1690.00
5.00 ~ 100.00
5.00 ~ 150.00
5.00 ~ 100.00
5.00 ~ 150.00
5.00 ~ 600.00
5.00 ~ 600.00
5.00 ~ 600.00
8.00 ~ 1250.00
100.01 ~ 700.00
193.01 ~ 600.00
5.00 ~ 600.00
8.00 ~ 1250.00
100.01 ~ 700.00
193.01 ~ 600.00
8.00 ~ 1690.00
8.00 ~ 1690.00
304.01 ~ 1000.00
304.01 ~ 1000.00
3.00 ~ 4.99
5.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 12.99
13.00 ~ 14.99
15.00 ~ 19.99
Stainless Steel
Plate thickness (T)
2~5
6 ~ 10
12 ~ 20
22 ~ 30
32 ~ 50
55 ~ 80
85 ~ 100
Rolled Copper
Finished width (W)
5.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 1500.00
6.00 ~ 9.99
10.00 ~ 1500.00
10.00 ~ 1500.00
15.00 ~ 1500.00
25.00 ~ 1500.00
40.00 ~ 1500.00
50.00 ~ 1500.00
Finished length (L)
Grades specified below
5.00 ~ 150.00
8.00 ~ 550.00
10.00 ~ 1550.00
6.00 ~ 550.00
10.00 ~ 1550.00
10.00 ~ 1550.00
15.00 ~ 1550.00
25.00 ~ 1550.00
40.00 ~ 1550.00
50.00 ~ 1550.00
• SUS303 • SUS316 • SUS430 • SUS304 annealed plates
• SUS304 • SUS304L • SUS410 • SUS310S
• SUS316L • SUS303 annealed plates
Plate thickness (T)
1~9
10 ~ 18
20 ~ 30
35 ~ 50
55 ~ 60
65 ~ 100
Finished width (W)
5.00 ~ 150.00
150.01 ~ 300.00
12.00 ~ 150.00
150.01 ~ 300.00
17.00 ~ 150.00
150.01 ~ 300.00
22.00 ~ 150.00
150.01 ~ 300.00
32.00 ~ 150.00
150.01 ~ 300.00
50.00 ~ 150.00
150.01 ~ 300.00
Finished length (L)
5.00 ~ 600.00
150.01 ~ 300.00
12.00 ~ 600.00
150.01 ~ 300.00
17.00 ~ 600.00
150.01 ~ 300.00
22.00 ~ 600.00
150.01 ~ 300.00
32.00 ~ 600.00
150.01 ~ 300.00
50.00 ~ 600.00
150.01 ~ 300.00
• Oxygen-free copper plates • tough pitch copper plates • brass
plates • chromium copper plates
20.00 ~ 29.99
30.00 ~ 36.00
36.01 ~ 46.00
46.01 ~ 56.00
56.01 ~ 100.00
100.01 ~ 116.00
116.01 ~ 146.00
15
31
100.01 ~ 700.00
5.00 ~ 650.00
100.01 ~ 1100.00
5.00 ~ 650.00
8.00 ~ 1690.00
390.01 ~ 1100.00
8.00 ~ 2280.00
8.00 ~ 2280.00
390.01 ~ 1250.00
390.01 ~ 1690.00
10.00 ~ 2280.00
10.00 ~ 2280.00
390.01 ~ 1690.00
390.01 ~ 1690.00
10.00 ~ 1690.00
10.00 ~ 1690.00
560.01 ~ 815.00
1150.01 ~ 1520.00
10.00 ~ 2280.00
10.00 ~ 2520.00
10.00 ~ 1690.00
815.01 ~ 1150.00
1150.01 ~ 1250.00
1150.01 ~ 1690.00
10.00 ~ 2520.00
10.00 ~ 1690.00
10.00 ~ 2520.00
1150.01 ~ 2280.00
20.00 ~ 3047.00
20.00 ~ 3047.00
100.01 ~ 2520.00
100.01 ~ 2520.00
30.00 ~ 3047.00
30.00 ~ 3047.00
120.01 ~ 2520.00
120.01 ~ 2520.00
30.00 ~ 3047.00
30.00 ~ 3047.00
120.01 ~ 2520.00
120.01 ~ 2520.00
30.00 ~ 3047.00
Plate thickness finished up to 49.5
depending on the width and length ensions
130.01 ~ 2520.00
50.00 ~ 3047.00
150.01 ~ 2520.00
100.00 ~ 3047.00
150.01 ~ 2520.00
100.00 ~ 2497.00
146.01 ~ 150.00
100.00 ~ 997.00
100.00 ~ 2497.00
150.01 ~ 180.00
100.00 ~ 540.00
100.00 ~ 540.00
10.00 ~ 1690.00
1150.01 ~ 1250.00
20.00 ~ 3047.00
100.01 ~ 2520.00
390.01 ~ 2280.00
815.01 ~ 1690.00
10.00 ~ 2280.00
390.01 ~ 1690.00
20.00 ~ 2497.00
390.01 ~ 2280.00
815.01 ~ 1690.00
30.00 ~ 3047.00
120.01 ~ 2520.00
30.00 ~ 2497.00
30.00 ~ 2497.00
30.00 ~ 2497.00
30.00 ~ 2497.00
30.00 ~ 2497.00
50.00 ~ 2497.00
50.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 2497.00
100.00 ~ 2497.00
Plate thickness finished up to 149.5
depending on the width and length ensions
100.00 ~ 2497.00
100.00 ~ 540.00
16
31
Stainless Steel
Finished width (W)
2.00 ~ 2.99
5.00 ~ 50.00
5.00 ~ 7.99
8.00 ~ 150.00
5.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 200.00
200.01 ~ 350.00
5.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 250.00
250.01 ~ 350.00
6.00 ~ 7.99
8.00 ~ 150.00
150.01 ~ 350.00
8.00 ~ 49.99
50.00 ~ 500.00
500.01 ~ 1000.00
10.00 ~ 49.99
50.00 ~ 1000.00
15.00 ~ 49.99
50.00 ~ 1000.00
20.00 ~ 49.99
50.00 ~ 1000.00
30.00 ~ 49.99
50.00 ~ 1000.00
50.00 ~ 1000.00
80.00 ~ 1000.00
3.00 ~ 3.99
4.00 ~ 4.99
5.00 ~ 5.99
6.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 14.99
15.00 ~ 19.99
20.00 ~ 29.99
30.00 ~ 49.99
50.00 ~ 79.99
80.00 ~ 100.00
Finished length (L)
303
304 • 304 annealed plates
303 annealed plates
304L • 310S • 316 • 316L
430 etc.
410 etc.
5.00 ~ 150.00
5.00 ~ 150.00
5.00 ~ 150.00
5.00 ~ 150.00
8.00 ~ 800.00
8.00 ~ 650.00
5.00 ~ 150.00
5.00 ~ 150.00
8.00 ~ 800.00
8.00 ~ 800.00
150.01 ~ 200.00
150.01 ~ 400.00
5.00 ~ 300.00
8.00 ~ 800.00
150.01 ~ 400.00
6.00 ~ 500.00
8.00 ~ 800.00
8.00 ~ 800.00
50.00 ~ 1200.00
10.00 ~ 1000.00
50.00 ~ 1550.00
15.00 ~ 1550.00
20.00 ~ 1550.00
30.00 ~ 1550.00
50.00 ~ 1550.00
80.00 ~ 1550.00
5.00 ~ 300.00
8.00 ~ 800.00
150.01 ~ 250.00
6.00 ~ 500.00
8.00 ~ 800.00
150.01 ~ 600.00
8.00 ~ 800.00
50.00 ~ 1000.00
10.00 ~ 800.00
50.00 ~ 1200.00
15.00 ~ 1000.00
50.00 ~ 1550.00
20.00 ~ 1000.00
50.00 ~ 1550.00
30.00 ~ 1000.00
50.00 ~ 1550.00
50.00 ~ 1550.00
80.00 ~ 1550.00
Rolled Copper
Finished thickness (T) Finished width (W)
3.00 ~ 5.99
6.00 ~ 7.99
8.00 ~ 9.99
10.00 ~ 19.99
20.00 ~ 29.99
30.00 ~ 49.99
50.00 ~ 100.00
5.00 ~ 150.00
5.00 ~ 150.00
5.00 ~ 150.00
150.01 ~ 300.00
10.00 ~ 150.00
150.01 ~ 300.00
20.00 ~ 150.00
150.01 ~ 300.00
30.00 ~ 150.00
150.01 ~ 300.00
50.00 ~ 150.00
150.01 ~ 300.00
Finished length (L)
5.00 ~ 150.00
5.00 ~ 300.00
5.00 ~ 600.00
150.01 ~ 300.00
10.00 ~ 600.00
150.01 ~ 300.00
20.00 ~ 600.00
150.01 ~ 300.00
30.00 ~ 600.00
150.01 ~ 300.00
50.00 ~ 600.00
150.01 ~ 300.00
• Oxygen-free copper plates • tough pitch copper plates • brass
plates • chromium copper plates
Chamfering
• All-round chamfering
Aluminum: Normally, light chamfering for around 0.1 mm; Chamfering available for a maximum of 5 mm
Stainless steel: Normally, light chamfering for around 0.1 mm; Chamfering available for a maximum of 3 mm
Rolled copper: Normally, light chamfering for around 0.1 mm; Chamfering available for a maximum of 5 mm
• Corner chamfering
Aluminum: Chamfering available for 0.1 mm to 60 mm, or cutting with a chip saw for processing of more than 60 mm
Stainless steel: Chamfering available for 0.1 mm to 60 mm
Rolled copper: Chamfering available for 0.1 mm to 25 mm
17
31
Processing Accuracy Standards (for Aluminum and Rolled Copper)
Width (W)
b’
Processing accuracy standards for width (W) and
Plate length (L)
thickness (T)
Standard tolerance
a c’
b
c a’
~ 300
±0.05
0.04
~ 770
±0.05
0.04
±0.07
0.07
~ 1150
±0.05
0.04
±0.07
0.07
±0.08
0.08
~ 500
±0.05
~ 1000
±0.08
0.05
~ 1500
±0.10
0.10
~ 3047
±0.30
0.30
*1 Squareness of the width plane and the length plane to the plate thickness plane (mm): 0.02 or less
*2 Squareness of the plate thickness plane to the width plane
Width (W)
and the length plane (mm)
The standard applies solely where the finished plate
thickness is 60 or more for the A5052P, 30 or more for
Plate
thickness (T)
the A2017P or 30 or more for the A7075P.
b’
Plane roughness
• Plane roughness of width (W) and length (L): 3.2S or less
• Squareness of width (W) to length (L) (mm)
Plate
thickness (T)
* For any dimension of 500 (W) x 500 (L) or smaller,
this standard applies to four right angles
For any larger dimension,
it applies solely to one right angle on the reference plane.
b’
c’
c
Length (L)
b
4F squareness
Squareness of the edge between planes
b and c.
The same applies to the edges between
planes b and c', between planes b' and c
and between b' and c'.
Width/Length
Squareness
~ 50
0.02
~ 100
0.015
0.015
~ 200
0.03
0.03
~ 300
0.045
0.045
~ 400
0.08
0.06
0.06
Finished plate
thickness
~ 500
0.10
0.075
0.075
~ 1000
~ 1500
~ 3047
0.02 per hundred
0.30
0.02 per hundred
0.30
0.015 per hundred
0.15
Parallelism (length)
Width/Length
~ 300
~ 350
~ 1520
~ 350
0.03
0.03
~ 500
0.03
0.03
0.05
~ 540
0.03
0.04
0.05
~ 3047
0.03
0.04
0.01 per hundred in width
~ 500
0.04
0.04
0.05
~ 540
0.04
0.04
0.05
~ 4000(3047)
0.05
0.01 per hundred in length
0.01 per hundred in length
Parallelism (width)
Width/Length
~ 300
~ 350
~ 1520
5.00 ~ 7.99
8.00 ~ 19.99
20.00 ~ 39.99
~ 300
0.03
~ 300
0.03
~ 350
0.03
0.03
40.00 ~ 180.00
Finished plate
thickness
2.00 ~ 4.99
8.00 ~ 19.99
20.00 ~ 39.99
40.00 ~ 180.00
31
~ 150
0.08
~ 200
0.10
Length (L)
~ 250
0.12
*2 6F squareness
Relationship with planes a and a' on
the basis of plane c or c' and plane b
or b'
Width/
Length
~ 100
~ 390
~ 100
~ 700
~ 100
~ 390
~ 770
~ 1150
~ 1520
~ 100
~ 390
~ 770
~ 1150
~ 1520
~ 100
~ 390
~ 770
~ 1150
~ 1520
~ 100
~ 200
0.04
0.05
0.06
0.04
0.05
0.04
0.05
0.03
0.03
~ 300
~ 400
0.06
0.07
0.07
0.08
0.05
0.06
0.06
0.07 (W)
Width
0.04
0.05
0.05 Plate
0.06
thickness0.07
(T)
b’
~ 500
~ 1000
0.08
0.09
0.07
0.08
0.06
0.07
0.08
0.09
0.10
0.08
0.09
0.07
0.08
0.09
0.10
c
Length (L)
c’
b
0.03
0.04
0.05
0.04
0.05
0.04
0.06
0.07
0.04
0.06
0.07
0.05
0.07
0.08
0.08
0.03
0.04
0.05
0.04
0.05
0.04
0.06
0.07
0.04
0.06
0.07
0.04
0.06
0.07
0.08
~ 100
~ 200
~ 300
~ 400
~ 500
~ 1000
0.04
0.05
0.06
0.04
0.05
0.02
0.04
0.06
0.07
0.05
0.06
0.03
0.04
0.07
0.08
0.06
0.07
0.04
0.05
0.06
0.08
0.09
0.07
0.08
0.05
0.06
0.07
0.09
0.10
0.08
0.09
0.06
0.07
0.08
0.10
0.015
0.02
0.03
0.03
0.04
0.03
0.05
0.05
0.04
0.05
0.05
0.05
0.05
0.05
0.06
0.012
0.02
0.03
0.03
0.03
0.03
0.04
0.05
0.03
0.04
0.05
0.03
0.04
0.05
0.05
~ 1500
~ 2000
0.11
0.09
0.10
0.08
0.09
0.10
0.11
0.12
0.05
0.07
0.08
0.09
0.10
0.04
0.06
0.07
0.08
0.09
0.10
0.11
0.09
0.10
0.11
0.12
0.13
0.06
0.08
0.09
0.10
0.11
0.05
0.07
0.08
0.09
0.10
~ 1500
~ 2000
0.10
0.09
0.10
0.07
0.08
0.09
0.10
0.10
0.05
0.05
0.06
0.07
0.08
0.03
0.04
0.05
0.06
0.07
0.10
0.10
0.08
0.09
0.10
0.10
0.10
0.06
0.06
0.07
0.08
0.09
0.04
0.05
0.06
0.07
0.08
~ 3047
(2520)
0.10
0.11
0.12
0.13
0.14
0.07
0.09
0.10
0.11
0.12
0.06
0.08
0.09
0.10
0.11
Flatness • Flatness of plate thickness (T)
5.00 ~ 7.99
18
~ 100
0.05
a c’
b
c a’
*1 6F squareness
Relationship with planes b and b' and
planes c and c' on the basis of plane a
or a'
Parallelism • Parallelism of plate thickness (T) (mm)
2.00 ~ 4.99
Width/Length
~ 40
~ 300
~ 1520
~ 3047
±0.07
0.07
±0.09
0.09
±0.10
0.10
±0.10
0.10
Squareness
0.05
Width (W)
~ 2000
±0.06
0.06
±0.08
0.08
±0.09
0.09
±0.10
0.10
• Plane roughness of plate thickness (T): 3.2S or less
For length of 500 or less For length exceeding 500
Squareness
~ 1505
±0.06
0.06
±0.08
0.08
±0.08
0.08
±0.10
0.10
Plane roughness
Minimum range
0.04
• Standard tolerance (mm) and minimum range (mm) for plate thickness (T) (Left: standard tolerance, Right: minimum range)
Width/Length
~ 300
~ 770
~ 1150
~ 1525
• Standard tolerance (mm) and minimum range (mm) for width (W) and length (L) Length (L)
Processing dimension
Processing accuracy standards for plate thickness (T)
Width/
Length
~ 100
~ 390
~ 100
~ 700
~ 100
~ 390
~ 770
~ 1150
~ 1520
~ 100
~ 390
~ 770
~ 1150
~ 1520
~ 100
~ 390
~ 770
~ 1150
~ 1520
0.02
0.02
~ 3047
(2520)
0.09
0.10
0.10
0.10
0.10
0.06
0.07
0.08
0.09
0.10
0.05
0.06
0.07
0.08
0.09
19
31
Processing accuracy standards for plate thickness (T)
Processing Accuracy Standards (Stainless Steel)
Width (W)
Processing accuracy standards for width (W) and length (L)
b’
Plate
thickness (T)
• Standard tolerance (mm) and minimum range (mm) for width (W) and length (L)
Processing dimension
Standard tolerance
~ 300
~ 1000
~ 1550
±0.05
±0.08
±0.10
• Standard tolerance (mm) and minimum range (mm) for plate thickness (T) (Left: standard tolerance, Right: minimum range)
Width/Length
~ 300
~ 700
~ 1000
a c’
b
c a’
~ 700
0.05
±0.05
±0.07
~ 1000
±0.05
0.05
±0.08
0.08
±0.10
0.10
0.05
0.07
Squareness
*1 Squareness of the width plane and the length plane to the plate thickness plane (mm): 0.02 or less
*2 Squareness of the plate thickness plane to the width plane
and the length plane (mm)
Width (W)
The standard applies solely where the finished plate
thickness is 20 or more.
Plate
For length of 500 or less For length exceeding 500
0.05
0.05
0.10
b’
thickness (T)
Width/Length
Squareness
Plane roughness
• Plane roughness of width (W) and length (L): 6.3S or less
Width (W)
• Squareness of width (W) to length (L) (mm)
Plate
* For any dimension of 300 (W) x 300 (L) or smaller,
thickness (T)
this standard applies to four right angles
For any larger dimension,
it applies solely to one right angle on the reference plane.
Width/Length
~ 300
~ 1500
~ 100
0.015
~ 200
0.03
b’
c’
c
b
~ 100
0.05
~ 150
0.08
~ 200
0.10
Length (L)
~ 250
0.12
*1 6F squareness
Relationship with planes b and b' and
planes c and c' on the basis of plane a
or a'
*2 6F squareness
Relationship with planes a and a' on
the basis of plane c or c' and plane b
or b'
Parallelism • Parallelism of plate thickness (T) (mm)
~ 500
0.05
0.07
~ 1000
0.07
0.10
~ 1550
0.10
0.12
Parallelism (length)
Width/Length
~ 300
~ 1500
~ 50
0.02
a c’
b
c a’
4F squareness
Squareness of the edge between planes
b and c.
The same applies to the edges between
planes b and c', between planes b' and c
and between b' and c'.
Length (L)
~ 300
0.045
~ 1550
±0.05
0.06
±0.10
0.10
±0.14
0.14
• Plane roughness of plate thickness (T): 6.3S or less
Minimum range
Squareness
~ 1200
±0.05
0.05
±0.09
0.09
±0.12
0.12
Plane roughness
Length (L)
0.04
~ 350
±0.05
~ 300
0.03
~ 500
0.05
0.05
~ 1000
~ 1550
0.05
0.05
0.01 per hundred in width 0.01 per hundred in width
~ 300
0.03
~ 500
0.03
0.05
~ 1000
~ 1550
0.04
0.05
0.01 per hundred in length 0.01 per hundred in length
Finished plate thickness Width/Length
~ 150
2.00 ~ 7.99
~ 350
~ 150
~ 350
8.00 ~ 19.99
~ 700
~ 1000
~ 150
~ 350
20.00 ~ 39.99
~ 700
~ 1000
~ 150
~ 350
40.00 ~ 100.00
~ 700
~ 1000
~ 100
0.04
0.04
~ 200
0.05
0.05
0.05
0.05
~ 300
~ 400
0.06
0.07(W)
Width
0.07
0.09
0.06 Plate 0.07
(T)
0.06 thickness0.07
0.08
~ 600
0.08
0.10
0.07
0.08
0.10 (L)
Length
b’
c
0.03
0.04
0.05
0.05
0.06
0.06
0.07
0.09
0.06
0.07
0.10
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.07
0.05
0.06
0.08
0.09
~ 200
0.04
0.05
0.04
0.05
~ 300
0.06
0.07
0.06
0.07
~ 400
0.07
0.09
0.07
0.08
0.10
~ 600
0.09
0.11
0.08
0.09
0.11
0.015
0.03
0.04
0.04
0.05
0.05
0.06
0.08
0.06
0.07
0.09
0.012
0.02
0.03
0.03
0.04
0.04
0.05
0.06
0.05
0.06
0.07
c’
~ 800
0.08
0.10
0.08
0.09
0.12
0.13
0.07
0.08
0.11
0.12
0.06
0.07
0.9
0.10
~ 1000
~ 1200
~ 1550
0.08
0.09
0.12
0.14
0.07
0.08
0.12
0.14
0.06
0.07
0.10
0.11
0.09
0.10
0.13
0.16
0.08
0.09
0.13
0.15
0.07
0.08
0.10
0.11
0.09
0.11
0.15
0.20
0.08
0.10
0.14
0.16
0.07
0.09
0.11
0.12
~ 800
0.11
0.13
0.09
0.10
0.12
0.12
0.07
0.08
0.10
0.12
0.06
0.07
0.08
0.09
~ 1000
~ 1200
~ 1550
0.10
0.12
0.13
0.14
0.08
0.09
0.11
0.13
0.07
0.08
0.09
0.10
0.11
0.12
0.14
0.16
0.09
0.10
0.12
0.14
0.08
0.09
0.10
0.11
0.12
0.12
0.16
0.20
0.10
0.11
0.14
0.16
0.09
0.10
0.11
0.12
b
Parallelism (width)
Width/Length
~ 300
~ 1500
Flatness • Flatness of plate thickness (T)
Finished plate thickness Width/Length
~ 150
2.00 ~ 7.99
~ 350
~ 150
~ 350
8.00 ~ 19.99
~ 700
~ 1000
~ 150
~ 350
20.00 ~ 39.99
~ 700
~ 1000
~ 150
~ 350
40.00 ~ 100.00
~ 700
~ 1000
20
31
~ 100
0.02
0.02
21
31
Blanking
Concave blanking for aluminum
L-shaped blanking for aluminum
Blanking dimension tolerance (C to E) (mm)
Reference point
Blanking dimension tolerance (C and D) (mm)
Dimension
~6
~ 100
~ 500
~ 1000
More than 1,000
Dimension
~6
~ 100
~ 500
~ 1000
N (medium class)
±0.1
±0.2
±0.3
±0.4
±0.5
N (medium class)
±0.1
±0.2
±0.3
±0.4
±0.5
S (precision grade)
±0.05
±0.05
±0.1
±0.2
±0.3
S (precision grade)
±0.05
±0.05
±0.1
±0.2
±0.3
Reference point
Class N will apply unless otherwise instructed at the time of ordering.
Plate
type
Block
type
L (T)
5 ~ 30
30.01 ~ 40
40.01 ~ 80
10 ~
1400
Processing dimensions (mm)
Category
A
B
200 ~
1400
100 ~
650
30 ~
300
20 ~
150
Processing dimensions
Processed plane (to plane A)
C
D
E
R
Parallelism Squareness
5 ~ (B-30)
10.2 ~ (A-60) 5 or more
0.05 /
0.1 /
30 or more
10 ~ (B-30)
20.2 ~ (A-60) 10 or more
100mm
100mm
50 or more
15 ~ (B-50)
30.2 ~ (A-100) 15 or more
Additionally subject to the
1 ~ 30
10.2 ~ (A-10)
following condition:
0.05 /
0.1 /
20.2 ~ (A-10) 1 or less
5 or more 30.01 ~ 40 Equivalent to or less than (B-5),
Equivalent to or less than (C x 5), and
100mm
100mm
40.01 ~ 80 Equivalent to or less than (A-C-E) x 5 30.2 ~ (A-10)
Convex blanking for aluminum
Category
Plate
type
Block
type
L (T)
5 ~ 30
30.01 ~ 40
40.01 ~ 80
10 ~ 1400
A
200 ~
1400
30 ~
300
C
30 ~ (A - 5)
100 ~
30 ~ (A-10)
650
50 ~ (A-15)
B
20 ~
150
Reference point
Plate
type
Block
type
22
31
10 ~
1400
200 ~
1400
30 ~
300
1 or less
0.05 /
100mm
0.1 /
100mm
Dimension
~6
~ 100
~ 500
~ 1000
More than 1,000
Dimension
~6
~ 100
~ 500
~ 1000
N (medium class)
±0.1
±0.2
±0.3
±0.4
±0.5
N (medium class)
±0.1
±0.2
±0.3
±0.4
±0.5
S (precision grade)
±0.05
±0.05
±0.1
±0.2
±0.3
S (precision grade)
±0.05
±0.05
±0.1
±0.2
±0.3
A
following conditions:
Equivalent to or more than (B-80) and
Equivalent to or more than B-(5 x C)
5 ~ (B-1)
Blanking dimension tolerance (C and D, for the plate type) (mm)
Reference point
More than 1,000
For the block type, tolerance Q is +/- 0.3°.
L (T)
5 ~ 30
30.01 ~ 40
40.01 ~ 80
5 ~ (A-1)
R
5 or more
0.05 /
0.1 /
10 or more
100mm
100mm
15 or more
D
30 ~ (B - 5)
30 ~ (B-10)
50 ~ (B-15)
Tilt blanking for aluminum
Blanking dimension tolerance (C to F) (mm)
Category
More than 1,000
B
100 ~
650
20 ~
150
C
D,F
30 ~ (B-5)
30 or more
30 ~ (B-10)
50 or more
50 ~ (B-15)
5 or more
5~
(B-1)
following conditions:
Equivalent to or more than (B-80) and
Equivalent to or more than B-(5 x C)
E
5 ~ (A-35)
10 ~ (A-40)
15 ~ (A-65)
1 ~ (A-6)
R
5 or more
0.05 /
0.1 /
10 or more
100mm
100mm
15 or more
1 or less
0.05 /
100mm
0.1 /
100mm
Category
Plate
type
Block
type
B
C
L (T)
A
5 ~ 80
200 ~ 1400
100 ~ 650
10 ~ 50
50.01 ~ 200
30 ~ 250
L /2 ~ 250
20 ~ 99.99
20 ~ 125
D
Q
1 or more
1 or more
1° ~ 89°
5 or more
5 or more
1° ~ 89°
23
31
Blanking
Rectangular hollow blanking for aluminum
Circle blanking and ring blanking for aluminum
Reference point
Dimension
~6
~ 100
~ 500
~ 1000
More than 1,000
N (medium class)
±0.1
±0.2
±0.3
±0.4
±0.5
S (precision grade)
±0.05
±0.05
±0.1
±0.2
±0.3
Category
Plate type
Blanking dimension tolerance (A to C) (mm)
T
5 ~ 30
30.01 ~ 40
40.01 ~ 80
Dimension
~ 100
~ 450
N (medium class)
±0.2
±0.3
B
C•D
20 or more
50 ~ 650
30 or more
40 or more
A
50 ~ 1400
E•F
Ra ~ Rd
5 or more
10 or more
15 or more
20 or more
Category
T
A
B
C
Circle
5 ~ 50
160 ~ 450
—
—
Ring
5 ~ 50
160 ~ 450
30 ~ (A - 60)
30 or more
* The plate thickness plane may be milled depending on the material and the plate thickness. Please contact us for details.
* The minimum distance between the hollow and the end face is 20 mm.
Circular hollow blanking for aluminum
Corner blanking for aluminum
Reference point
Dimension
~6
~ 100
~ 500
~ 1000
N (medium class)
±0.1
±0.2
±0.3
±0.4
More than 1,000
±0.5
S (precision grade)
±0.05
±0.05
±0.1
±0.2
±0.3
Category
Plate type
T
5 ~ 30
30.01 ~ 40
40.01 ~ 80
A
B
50 ~ 1400
50 ~ 650
* The minimum distance between the hollow and the end face is 10 mm.
24
31
C
20 or more
30 or more
40 or more
E•F
20 or more
25 or more
30 or more
Category
T
A
Corner rounding
5 ~ 80
200 ~ 1400
Corner cutting
5 ~ 80
200 ~ 1400
B
Ra ~ Rd
Ca1 • Ca2 ~ Cd1 • Cd2
100 ~ 650
1 or more
—
100 ~ 650
—
1 or more
* Corner rounding may leave some unevenness where a linear portion meets a rounded curve.
25
31
Blanking
Combined processing
Examples of results
Category
Plate type
L (T)
5 ~ 50
A
C
D
B
100 ~ 650
200 ~ 1400
E
F
Other processing (hole blanking, tapping, etc.)
Category
(mm)
Drill hole
φ 2.5 ~ φ 14.0
Counterbore
φ5 ~
Tapped hole
M3 ~ M16
* Hole depth: Not exceeding five times the hole
diameter
26
31
G
H
R
Whether or not to perform the blanking is
determined on a case-by-case basis.
Drill hole
Countersink
Counterbore
Tapped hole
Side Tapping for Eye Bolts
Stainless Steel Surface Grinding
Materials: SUS301-NO1 (plates) and SUS304-NO1 (plates)
Product Types
Tapping position
• Aluminum cut plates
• Stainless steel cut plates
• Rolled copper cut plates
• Milled products
(aluminum, stainless steel and rolled copper plates)
• Plate dimensions: 2,400 x 3,000 maximum (within the range of the
original plate size)
• Both cut plates and milled plates can be processed.
• Aluminum, stainless steel, and rolled copper can all be processed.
Stainless steel surface grinding range (mm)
Standard dimensions of tapped holes
Tap
Pilot hole
2G (t • t)
Eye bolt
Nominal
diameter
Pitch
Depth
Diameter
Depth
Shank length
M8
1.25
18.0
6.8
20.0
15
M10
1.50
20.0
8.5
22.0
17
3.00 ~ 4.99
M12
1.75
23.0
10.3
25.0
20
5.00 ~ 6.99
M14
2.00
26.0
12.0
28.0
23
M16
2.00
30.0
14.0
32.0
27
SUS303, SUS304, etc.
Material
Finished width (W)
5.00 ~ 50.00
5.00 ~ 100.00
100.01 ~ 150.00
7.00 ~ 200.00
15.00 ~ 200.00
20.00 ~ 200.00
7.00 ~ 14.99
15.00 ~ 19.99
20.00 ~ 62.00
Please contact us for side tapping in any dimensions other than shown above.
Finished length (L)
5.00 ~ 150.00
5.00 ~ 300.00
100.01 ~ 200.00
7.00 ~ 300.00
15.00 ~ 400.00
20.00 ~ 500.00
4G (t • t • w • w)
The hole distance and the distance
between a hole and the end face (wall
thickness) must be at least 5 mm.
SUS303, SUS304, etc.
Material
Process limitation
Hole distance
BT and BB are customizable in
steps of 0.5 mm.
Distance between a hole
and the end face
CT and CC are customizable in
steps of 0.5 mm.
3.00 ~ 4.99
5.00 ~ 9.99
10.00 ~ 19.99
20.00 ~ 29.99
30.00 ~ 62.00
Finished width (W)
5.00 ~ 50.00
5.00 ~ 70.00
10.00 ~ 80.00
20.00 ~ 100.00
30.00 ~ 100.00
Finished length (L)
5.00 ~ 150.00
5.00 ~ 150.00
10.00 ~ 150.00
20.00 ~ 200.00
30.00 ~ 300.00
Stainless steel surface grinding dimension tolerance (mm)
Process dimension tolerance
Finished plate thickness (T) – Finished width (W)
5.00 ~ 100.00
Flatness (per hundred mm)
Standard tolerance
0 ~ +0.1
Minimum range
0.02
* The milling accuracy standards apply to non-ground surfaces.
Flatness (per hundred mm)
3.00 ~ 7.99
8.00 ~ 14.99
15.00 ~ 62.00
Flatness
0.015
0.012
0.01
Flatness: 0.02 or less per hundred mm
Plane roughness: 6.3S or less
Squareness: 0.015 or less per hundred mm
27
31
28
31
Special Form Cutting for Aluminum
Irregular shape cutting with a stainless steel band saw
Examples of Forms
Examples of irregular shape cutting
Examples of forms in milling and special form cutting
Chamfering
L-shape
Four or six face processing
and chamfering
Convex shape
Chamfering
Notching
and notching
Radius cutting
Two face processing
and circle cutting
Circle, ring and hollow cutting
and hollow cutting
L-shape cutting
A
* The width for chamfering is 10 mm or more and the radius for radius cutting is 50 mm or more.
- Cutting range
Plate thickness: 4 t to 65 t
Plate size: from a minimum of 30 x 30 to a maximum of 420 x 420
A: 15 mm or more B: 5 mm or more
- Cutting tolerance: -0 to +3 mm
B
A
Convex shape cutting
Cutting
Base metal size
MIN φ 100
MAX φ 1,500 ( φ 980, φ 1,230)
MIN 50×50
MAX 1,525×2,500
Circle cutting
Special form
cutting
Milling
Ring cutting
Hollow cutting
29
Cutting range
1,525×3,050
1,000×2,000
1,250×2,500
1,250×3,050
Varies depending on the form
Please contact us in advance on each occasion.
Plate thickness: 1t to 150t
Exterior diameter: φ 100 to φ 1,500 ( φ 1,230, φ 1,000)
Interior diameter: φ 70 to φ 1,470 ( φ 1,200, φ 970)
Ring width: 15 to 490
Plate thickness: 1t to 150t maximum, depending on the form
Exterior dimensions: 100 x 100 to 1,525 x 1,525
Hollow: 70 or more in side length or φ 70 or more in diameter
Corner radius: None or at least 20
B
2
Diameter of φ 500 or less
Other than above
-0 ~ +3
-0 ~ +4
A 1
1
A
For any size: Thickness deviation -0 ~ +3
2
Special form cutting:
-0 ~ +3
Milling:
Subject to the milling tolerance
Diameter of φ 500 or less
Other than above
-0 ~ +3
-0 ~ +4
Chamfering
1
1
- Cutting range (from a minimum of 75 x 75 to a maximum with a diagonal length of 550)
Length: 500 or less for a width range of 75 to 200 (both inclusive)
420 or less for a width range of 201 to 350 (both inclusive)
Corner: 10 C or more
- Cutting tolerance: (1) -0 to +3 mm, (2) -0 to +6 mm
For any size: Thickness deviation -0 ~ +4
* The cutting range for special form cutting specifies the dimensions of the circumscribed rectangle. Even within the aforementioned range, cutting
may not be available depending on the form. Please contact us in advance.
31
- Cutting range
Plate size: from a minimum of 30 x 30 to a maximum of 420 x 420
A: 15 mm or more B: 5 mm or more
- Cutting tolerance: (1) -0 to +3 mm, (2) -0 to +6 mm
B
A
* A combination of milling and irregular shape cutting may be available depending on the shape. Please contact us in advance to discuss
your individual needs.
30
31
About Shinx
Corporate Profile
Company Name: Shinx Corporation Co., Ltd.
Business: Cutting, processing and sale of nonferrous metals
Capital: 83.5 million yen
Date of Establishment: April 1997
Representative: Yasuhiro Shibazaki
Number of Employees: 143 (as of April 2012)
Banks: Account holder name: Shinx Corporation
The Bank of Yokohama, Sagami Branch: Current Account 0102360
The Bank of Tokyo-Mitsubishi UFJ, Sagamihara Branch: Savings Account 1345809
Mizuho Bank, Machida Branch: Savings Account 2599926
Supplier: Sumikin Bussan Corporation
Main Customers:
Distributors of nonferrous metals, steel materials, and special steel and users related
to semiconductors, liquid crystal, and photovoltaic power generation systems
Locations:
Head Office: 4057-2 Sakuradai, Nakatsu, Aikawa-machi, Aiko-gun, Kanagawa
Prefecture 243-0303 Japan
(In the Kanagawa Nairiku Industrial Park)
Tel: 046-284-3494, Fax: 046-285-9491
Second Plant: 4034 Sakuradai, Nakatsu, Aikawa-machi, Aiko-gun, Kanagawa Prefecture 243-0303 Japan
Kansai Sales Office: 2-20, Nakashima 2-chome, Nishiyodogawa-ku, Osaka 555-0041 Japan (In the Nakashima Industrial Zone)
Tel: 06-6478-6123, Fax: 06-6478-6125
URL: http://www.shinx-corp.co.jp/
Major Equipment
18 aluminum cutters: Maximum stroke: 4,100 mm
One contour machine
45 milling machines:
Side processing capacity: 3,100 x 3,100 or 300 x 4,100 maximum
Flattening capacity: 1,500 x 2,500 maximum
12 band saw cutters:
Round bars of φ 500 maximum
Maximum stroke for plates: 2,500 mm
One machine dedicated to side tapping: Maximum hole size: M16
One plane grinder: Grinding capacity: 300 x 500 maximum
One upright machining center
Aluminum cutter (with a circular saw)
Major commercial products:
52S plates,
, 17S plates, 75S plates, 56S round bars, SUS304 and 303 plates, tough
pitch copper plates, oxygen-free copper plates, brass plates and chromium copper plates
Machining center (for blanking)
Contour machine (for aluminum ring cutting)
31
31
Two face processing machine (with a stroke of 4,000 mm)
Band saw cutter (for stainless steel plate cutting)
Sales Agreement
This agreement is made and entered between Shinx Corporation, a Japanese corporation having its principal office at 4057-2, Nakatsusakuradai, Aikawa town, Aikougun,
Kanagawa, Japan (“the Seller”), and [Company Name], a corporation duly organized under the laws of [Country or State Name] having its principal office at [Company
Address] (“the Buyer”).
For and on behalf of the Seller :
For and on behalf of the Buyer :
Signed by
Printed Name:
Title:
Date:
Signed by
Printed Name:
Title:
Date:
WHEREAS, the Seller has achieved great success in manufacturing and selling nonferrous metal primary processing products and desires to sell such products; and
WHEREAS, the Buyer is desirous of purchasing the Seller's products;
NOW, THEREFORE, in consideration of the foregoing and the obligations hereunder, the parties hereto agree as follows:
(1) Conclusion of sales and purchase contract
This Agreement is a sales and purchase contract concluded between the Seller and the Buyer. When the Seller has received two (2) copies of this Agreement bearing the signature of the
Buyer and has sent out a copy thereof signed by the Seller’ s duly authorized representative to the Buyer, this Agreement is deemed to be made and entered between the parties hereto. At
the time when a purchase order acknowledgement that sets forth description, quantity, unit price, an amount of payment, and trade terms concerning ordered goods (“the Goods”) is
issued and sent by the Seller, a separate individual sales and purchase contract (“the Individual Contract”) shall become effective under the terms and conditions stated in such purchase
order acknowledgement. Concerning any terms and conditions that are not expressly set forth in the said purchase order acknowledgement, the provisions stipulated in this Agreement shall
apply. The Buyer shall understand and acknowledge that the specifications of the Goods including their size, accuracy, precision and tolerance set forth in any catalog, price list, website,
brochure, leaflet or any other medium (collectively “the Catalog”) in connection with the Goods may change from time to time by the Seller in its discretion without prior notice to the Buyer.
(2) Delivery
The Seller shall ship the Goods to the Buyer under the trade term designated by the Individual Contract (that shall be interpreted in accordance with the latest version of INCOTERMS).
(3) Force majeure
The Seller shall not be held responsible for any delay in delivery or breach of contract caused by unexpected contingencies or events of force majeure including, without limitation:
Natural disaster.. for example, earthquake, tidal wave, tsunami, lightning strike, flood, tornado, volcanic eruption, disease such as epidemic, pandemic or plague;
Manmade disaster... for example, fire, explosion, nuclear accident, shipwreck, blockade, communications failure, computer malfunction or failure, cyber terrorism;
Social upheaval ...for example, war, wartime mobilization, revolution, civil unrest, riot, demonstration;
Labor dispute-for example, unrest, strike, lockout, boycott, sabotage;
Act of government, etc ... for example, administrative guidance by government, act of governmental organizations or military, refusal to issue governmental permission or license, isolation
for quarantine, commercial embargo, purveyance;
Justified act... for example, compliance with laws, regulations, orders and ordinances; or
Insufficiency in infrastructure or resources ... for example, shortage of electric power, oil, gas or raw materials, unavailability of public transport, transportation facilities or other facilities,
port congestion.
(4) Cost fluctuations
The Buyer shall understand and acknowledge that there is a possibility that freight costs, various duties and tax rates, insurance premium rates and other costs required by governmental
organizations (collectively “the Costs”) may change or fluctuate even after the Individual Contract takes effect. In the event that such change or fluctuation of the Costs occurs after the
Individual Contract becomes effective, the Seller shall notify the Buyer thereof and the Buyer shall pay the difference to the Seller unless the Buyer pays the above Costs directly to the
relevant freighters, tax authorities, insurance companies or others. There is also a possibility that the prices of the Goods may change without prior notice to the Buyer. The Buyer shall
understand and acknowledge that the prices set forth in the Catalog in connection with the Goods are not necessarily kept updated.
(5) Shipment, settlement of payment
All payments for the Goods shall be made in US Dollars and in advance by wire transfer to an account designated by the Seller. In case the Costs shall be borne and paid to the Seller by the
Buyer separately from the above payments for the Goods, such Costs shall be paid in the same manner and together with the payments for the Goods. Fees for such wire transfer shall be
borne by the Buyer. Procedures for shipment of the Goods will be initiated upon the Seller's receipt, in full, of the above payments for the Goods and the Costs (if applicable) and two (2)
signed copies of this Agreement pursuant to the Clause (1) from the Buyer.
(6) Warranty against defects, refund
The Seller shall not be held responsible for providing a warranty against defects in the Goods, irrespective of descriptions, definitions and guaranteed values concerning the Goods set forth
in the Catalog. In the event that the Seller is unable to ship the Goods due to causes of its own or attributable to the Seller, the Seller shall immediately refund the payment for the Goods
received in advance to the Buyer and the Seller shall not be responsible for any damages and claims pertaining to such failure of shipment. THE SELLER DOES NOT MAKE AND DISCLAIM ANY
WARRANTY IN RESPECT OF THE GOODS OTHER THAN AS PROVIDED HEREIN, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
(7) Intellectual Property and Conformity to Laws
The Seller shall not be held responsible for any third party claims (including any infringement) arising in connection with intellectual property including but not limited to patents, utility
models, designs, trademarks, copyrights, and trade secrets. The Seller shall not guarantee any conformity to laws or regulations relevant to the Goods in counties, states or regions except for
Japan. The Seller may suspend the shipment of all Goods immediately after the Seller comes to know any of the above claims or non-conformity (including possibility thereof) and without
prior notice, regardless of the intentions of the Buyer.
(8) Return of goods
No return of the Goods shall be accepted in any event.
(9) Cancellation
The Seller will not accept the cancellation of an order for the Goods after the receipt of a purchase order unless otherwise expressly agreed by the Seller.
(10) Burden of Risk
The burden of risk of and Title to the Goods shall transfer from the Seller to the Buyer in accordance with the trade term (that shall be interpreted pursuant to the latest version of
INCOTERMS) stated in the purchase order acknowledgement concerning the Goods.
(11) Limitation of Liability
In no event will the Seller be liable to the Buyer for cumulative damages greater than the total amount paid by the Buyer to the Seller for the Goods which cause such damages or liabilities
and to which such damages or liabilities are directly related, whether such liabilities are contractual, in tort (including negligence) or otherwise. In no event will either party be liable for
incidental, consequential, punitive or special damages, or loss of profits or use even if the other party is notified of the possibility of such damages.
(12) Arbitration
All dispute, controversies or differences which may arise between the parties hereto, out of or in relation to or connection with this
Tokyo, in accordance with the Commercial Arbitration Rules of the Japan Commercial Arbitration Association.
Agreement shall be finally settled by arbitration in
(13) Governing Law
Unless specifically provided otherwise, this Agreement and each Individual Contract shall be construed and governed by the Laws of Japan without regard to principles of conflicts of laws.
The parties hereto agree to exclude the application of the United Nations Convention on Contracts for the International Sales of Goods if applicable.
Printed Name :
Printed Name :
Title :
Title :

Metal Processing Products Catalog

Transcription

Similar documents

aluminum products