Brochure

Transcription

Brochure
THEMEZ
DETAILING CUSTOMIZING
spoile
rz
trick out YOUR RIDE
As you customize your RIDE, think about special themez you can create
using RIDEMAKERZTM wheelz, treadz, decalz, soundz and accessory kitz! You
can do tribal, old school hot rod, racing or roll with your own flavors and
themed designs!
DETAILZ
Use RIDEMAKERZTM paint markers to detail your custom RIDE. Try putting an
accent stripe on your wheelz or drop some color on the center of your wheelz
to match your RIDE body color. Remember, you can pop the wheelz out to
make your job easier. Enginez and spoilerz can also be painted with accent
colors. Try painting your name, some colorful detailing or a bit of custom
pinstriping just like the pros!
PAINT
MARKERZ
z
e
engin
DECALz
RIDEMAKERZ decalz can be plastered over each other to create your own
eye-poppin’ images. Chooze decalz that go with a theme or style you like
and that complement your RIDE body, color or special paint job. Remember,
RIDEMAKERZ decalz can be repositioned to get your design just right! Don’t
forget to slap decalz on your enginez and spoilerz!
LETTERING
tire trimZ
z
DECAL
ez
p
i
p
e
sid
wheel
z
DECALz
!
E
Z
I
M
O
T
CUS
Pinstriping
& Like A PRO!
T
N
I
A
P
L
I
DETA
Spin on in to RIDEMAKERZ,
shift to RIDEMAKERZ.COM or get on the horn
(toll free) 1-866-58-RIDEZ (74339)
ACCESSORIZE
MOBILIZE
CUSTOMIZE
blown engine
Enginez
SWAPPIING OUT BODIIEz SPOILERz&rOOF RACKz
Chooze from an
interchangeable line of
souped-up enginez and
hood scoop options to fire
up your RIDE! Remove the
magnetic hood scoop that
came with your RIDE and
drop your new engine into
the hood opening. You’re
ready to rev & roll!
When it comes to spoilerz,
it’s a wing thing! To add an
upgraded spoiler to your
RIDE, first, remove the
stock spoiler on your RIDE.
Next, install your new
spoiler by placing
attachment posts into the
sockets. You’re so spoiled!
All RIDEMAKERZTM bodiez are interchangeable as long as they are the same
wheelbase (distance between front & back treadz). You can easily swap body
styles from RIDE to RIDE, Street to Monster chassiz or simply keep some extra
bodiez in your home shop!
Light Barz
Twin
Turbo
Take it to the top with your own
personalized roof accessories. Working
light barz and other rad roof gear attaches
magnetically to all RIDEMAKERZTM RIDEZ.
Now you’re on top of the action!
Treadz&wheelz
If you want to cruize in style, you
need to shine up the look with
custom wheelz and treadz! Remove
the stock treadz by pulling them
straight off. You can push the stock
wheelz out of the stock treadz too.
Push your new custom wheelz into
your new custom treadz until you feel
them “click.” Now, push your new
wheelz and treadz onto the wheel
hub until you feel it “click.”
severe gear
Radicalize your custom
RIDE with a SHOP-full of
back bumper accessories.
Add tricked out parts by
sliding the two tabs into
the rear chassiz slots until
they lock. Some body styles
have attachment slots
mounted in the body too.
It’s bling with extra zing!
ELECTRONICz
PLUG/PORT
sonicpodz
TM
Insert
Under
Chassiz
Crank it up with music and revved-up
sound effects for your RIDE! SONICPODZ
are interchangeable and plug into the port located inside
the bottom battery cover. Change SONICPODZ and replace
batteries by unscrewing the battery cover screw with a
Phillips screwdriver. (Note: Monster chassiz SONICPODZ
port is between the two front treadz – slide the cover to
the drivers’ side to open.) Move and groove!
Tread
& Wheelz
Assembly
gRILLz&gUARDz
Add custom front end grillz or
guardz to your low-rider or
high-rise RIDE by sliding the
two tabs into the front chassiz
slots until they lock. Some
body styles have attachment
slots mounted in the body.
Stay on guard when you hit
the streets!
Side Pipez&STEP Railz
All bodiez are removable by simply removing the four screws on the bottom
of your chassiz (2 in front & 2 in back) with your RIDEMAKERZ tool – a
standard 7/32" bit. Once all screws are removed, lift the body straight off.
Putting your new body on is just as easy. First line up the body posts with
the chassiz screw holes, push down to connect the electronicz socket in the
rear, and then screw in the four body screws with your RIDEMAKERZ tool.
Make ‘em snug, but don’t over-tighten!
Chooze from an interchangeable line of extreme side pipez and running
boardz to set your RIDE apart from the rest! Side accessories attach by
sliding the two tabs into the side chassiz slots until they lock. Light-up
accessories glow when you’re rollin’ Radio-Control style or when you
depress the hood scoop. Blaze a trail!