docJohn Deere - Steiner Tractor Parts
download 
Report Transcription
John Deere - Steiner Tractor Parts
Photos submitted by folks just like you! A. "41 model H, Shined up & posing before show" AW Martin, Walton, IN View more pictures & tractor stories in our digital book! www.SteinerTractor.com > Steiner Community > Tractor Stories B. "Restored 1949 John Deere M" Carlson Barrett, Westmoreland, NH C. "1960 electric start model 730 diesel" Douglass Britt, McCormick, SC D. "1969 John Deere 4020 side counsel" Gale Getschman, Baraboo, WI E. "Tractor ride" Jake Maggard, Mingo, IA F. "1950 John Deere M" James Davis, Marshfield, WI G. 1950 Late Styled A in front of a moving Dutch windmill" Peter Werkman, The Netherlands H. "John Deere model A w/ LL-A grain drill" Kyle Weber, Freedom, WY I. "Plow Days" Paul Cooper, Scottville, MI J. "Bringing in the sheaves at the threshing demo in Strathclair" Larry Dyck, Newdale, MB Canada K. "The Winter of 2007 in the Netherlands" Peter Werkman, The Netherlands Our complete album can be viewed at http://www.steinertractor.com/tractor-photo-winners.html A John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. 6 John Deere B C D E 328 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm F G H John Deere I J K STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 329 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere: Alphabetical index A Adjustable 3-point upright, parts bottom yoke......................................435 handle..................................................435 leveling screw...................................435 leveling screw & bottom yoke....435 pin.........................................................435 upright assy.......................................435 Air cleaner parts adaptor plate....................................397 caps......................................................396 clamps.................................................396 cups......................................................396 dust bowl...........................................397 filter element.....................................396 hoses.......................................... 396, 397 pipe grommet..................................396 stacks...................................................397 tubes....................................................397 vacuator valve..................................397 Alternators, parts alternators................................ 384, 385 bracket................................................385 mounting kits...................................385 pulleys.................................................385 Amp gauges, parts bulb......................................................365 gauges.................................................365 indicator dash lights.......................365 B Battery boxes, parts battery boxes...........................371-373 bushings.............................................372 covers......................................... 372, 373 fastener...............................................372 lid..........................................................372 trays.............................................371-373 Battery covers............................ 371, 372 Battery hold downs, parts bolts.....................................................371 hold downs........................................371 Be careful plates..................................392 Books.............................................439-441 Brake parts bushings.............................................424 disc brake ball...................................423 disc brake linings.............................422 discs............................................ 422, 423 gaskets................................................423 lining kits.................................. 422, 423 riveting tools.....................................423 seals......................................................423 springs....................................... 423, 424 valve operating boot assy............424 C Camshaft, parts bearing / bushing sets...................345 Caps air cleaner...........................................396 330 C Caps cont... fuel.............................................. 399, 400 hydraulic reservoir..........................425 pre cleaner............................... 397, 398 radiator...................................... 361, 362 rain........................................................352 steering wheel..................................413 Carburetors, parts adjustment needle assy................356 bowl.....................................................355 bushing...............................................355 carburetors........................................354 choke shaft........................................356 connector...........................................355 discs............................................ 356, 357 elbow strainer assy.........................355 floats....................................................358 fuel strainer........................................355 gaskets................................................357 hardware kits....................................355 main nozzles.....................................356 needle float valves..........................356 nuts.......................................................355 repair kits.................................. 358, 359 shut off valve.....................................357 spring...................................................355 throttle shafts...................................357 venturi.................................................357 Choke parts cables...................................................354 clip........................................................354 knob.....................................................354 Cigarette lighters................................375 Clutch parts alignment tool..................................409 bearings..............................................409 bolts........................................... 405, 409 brake linings......................................408 bushings.............................................409 clutch discs.....................406, 407, 409 clutch dogs.............................. 408, 409 facings....................................... 407, 408 nuts.......................................................405 pins............................................. 408, 409 pressure plates.................................409 pulley...................................................406 pulley covers.....................................406 shaft seal.............................................406 springs..............................406, 408, 409 washer.................................................406 Countershaft idler gear....................410 Crankshaft breathers, parts breather filter cores........................354 gaskets................................................354 ventilator pipe..................................354 Crankshaft parts bearings..............................................346 seals............................................ 346, 347 Cylinder heads.....................................344 D Dash light, parts bulbs....................................................389 covers......................................... 388, 389 dash lights................................ 388, 389 Data book..............................................439 Decals........................................... 438, 439 Distributor parts bushing and shim kit.....................376 caps............................................ 376, 378 clamp...................................................376 clips......................................................376 coil bracket........................................375 coils............................................. 375, 378 condensor..........................................378 cover....................................................376 distributor..........................................378 dust cover...........................................376 gaskets...................................... 376, 378 points...................................................378 resistor.................................................376 rotor.....................................................378 rotor button.......................................378 spark plug wire sets........................377 spark plugs.............................. 377, 378 tags.......................................................377 terminal insulator assys.................375 tune-up kits.......................................378 wire holder.........................................377 wire set................................................378 Drawbars, parts drawbars.............................................438 lift links................................................438 lock.......................................................438 pins.......................................................438 stabilizer bar......................................437 DVDs.......................................................441 E Electric outlet socket, parts boot......................................................370 connector plug.................................370 socket..................................................370 Elephant ears.......................................437 Emblems / nameplates clip........................................................391 emblems.............................................391 Engine gasket sets................... 343, 344 Engine overhaul kits..........................339 Engine rebore kits.................... 339, 340 Engine side shields.................. 395, 396 fastener stud assy............................396 spring...................................................396 Exhaust pipes, parts clamp...................................................352 exhaust pipes....................................352 flange gasket.....................................352 Exhaust stacks........................... 353, 354 F Fan assembly........................................363 F Fan belts.................................................364 Fenders, parts brackets.................................... 419, 420 fenders...................................... 419, 420 grommet.............................................420 light harness kit................................421 light panels........................................420 u-bolt...................................................420 wiring cover.......................................421 Floor mats.............................................421 Flywheel cover parts bushing...............................................405 guards..................................................405 inspection hole plate.....................405 Flywheel covers, part bushing...............................................405 Flywheel ring gears...........................348 Fuel filler neck grommets...... 400, 401 Fuel filters element...............................................403 fuel filters............................................403 gasket..................................................403 glass bowl..........................................403 Fuel gauges..........................................368 Fuel lines connector...........................................403 elbow...................................................403 gland and nut...................................403 lines......................................................403 Fuel sending unit................................368 Fuel tank parts baffle....................................................399 caps............................................ 399, 400 cover....................................................400 fastener...............................................399 gaskets...................................... 399, 400 grommets..................................399-401 pad........................................................399 screen..................................................401 straightening tool...........................399 webbing..............................................399 Fuse holder...........................................375 G Gauges amp......................................................365 fuel........................................................368 oil pressure.............................. 365, 366 tachometers............................ 368, 369 transmission............................ 366, 367 water temperature................ 367, 368 Gear shift balls.....................................411 Gear shift boots...................................411 Gear shift knobs..................................410 Gear shift lever, parts levers....................................................410 washer and snap ring....................410 Gears countershaft idler............................410 PTO.......................................................428 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm I Ignition parts bushing and shim kit.....................376 caps............................................ 376, 378 L Light arms................................... 385, 386 Light brackets............................ 385, 386 hardware............................................385 Light clamps.........................................385 Light mounting bracket...................386 clamp...................................................386 Light rod................................................386 Light switches, parts knobs......................................... 386, 387 resistor.................................................386 switches.................................... 386, 387 M Magnetos, parts caps......................................................379 coils.......................................................379 condensors........................................379 covers...................................................379 gaskets................................................379 magneto.............................................379 manual................................................379 points...................................................379 rotors....................................................379 Manifolds, parts clamp......................................... 336, 337 elbows....................................... 336, 338 exhaust pipes....................................337 gasket material.................................338 gaskets.......................................335-338 hardware kits.......................... 336, 337 heat baffles........................................336 heat exchanger...................... 336, 337 manifolds...................................335-337 nuts.......................................................335 Manuals.........................................439-441 Medallions............................................391 M Mufflers clamps.................................................351 exhaust adapter..................... 349, 350 mufflers......................................348-351 supports..............................................350 N Nosecone..............................................395 screens................................................395 O Oil / breather caps..............................347 Oil filters, part oil filters..............................................348 sealing plate......................................348 Oil line fittings.....................................347 Oil pan drain plug gaskets...................................... 347, 348 washer.................................................347 Oil pressure gauges, parts copper line kit...................................366 fittings.................................................366 gauges....................................... 365, 366 Oil pump drive shaft coupling.......347 P Petcock...................................................354 Piston ring sets.......................... 338, 339 Power steering parts bearing................................................414 bolt.......................................................414 couplers..............................................414 hole plug............................................414 port blocks.........................................414 priority flow control valve............414 pulley................................................... 414 torque generator.............................414 Pre-cleaner parts base......................................................398 bowls....................................................398 caps assys................................. 397, 398 clip/springs kit..................................398 covers...................................................398 pre-screener......................................398 screen..................................................398 PTO parts bearings..............................................428 brake plates.......................................427 clutch plate........................................427 discs......................................................426 gaskets................................................427 gears.....................................................428 guards........................................ 428, 429 over-running clutches...................428 seal housing......................................428 seals.............................................426-428 shaft.....................................................428 shield casting....................................429 shields..................................................429 springs.................................................429 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com R Radiator, parts bolt kits...............................................361 cap baffle............................................361 caps............................................ 361, 362 clamps.................................................363 cores.....................................................360 drain plug...........................................360 fan shroud..........................................360 flange fillers.......................................362 gaskets...................................... 360, 361 hoses....................................................363 lower bracket....................................360 mounting pad......................... 360, 361 pipes.....................................................362 radiators.................................... 360, 361 Raincaps.................................................352 Rear axle seals, parts retainers..............................................425 seals......................................................424 Rims, rear and front bolts..................................429, 431, 433 front hub cap....................................430 inner tube valves.............................432 lock nuts.............................................430 nuts.......................................................432 reinforcing ring................................432 retainers..............................................430 rims............................................. 432, 433 seals......................................................430 stops.....................................................433 tires, tubes..........................................431 washer.................................................431 wheels....................................... 430, 431 S Seats, parts adjustment handle.........................418 assy.......................................................418 back......................................................416 back plates.........................................417 bases....................................................416 bearing................................................419 bolt kit.................................................417 bolts.....................................................416 bushings................................... 418, 419 clamp nut and spacer....................416 coil........................................................415 coils.......................................................418 cushions.................................... 416, 417 frame....................................................416 link........................................................418 pads......................................................417 pan........................................................415 pan repair kit.....................................415 pin.........................................................415 pin and bushing rebuild kit.........418 pivot support rod............................419 shock absorbers..................... 418, 419 Index continues on next page 331 John Deere H Hardware kits.......................................394 Headlights, parts bezel.....................................................388 bulbs....................................................390 gaskets................................................390 harness kit..........................................388 headlights................................ 387, 388 knob........................................... 390, 391 lens.......................................................390 reflectors.............................................390 rings........................................... 388, 390 switch..................................................390 terminal...............................................390 washer.................................................390 Hood ornaments................................391 Hood, parts bumper...............................................395 hoods...................................................395 patches................................................395 Hose clamps............................... 363, 399 Hydraulic parts block off plug....................................426 bushing...............................................425 cap........................................................425 coupler covers..................................426 coupler washer.................................426 couplers..............................................426 lever grip............................................425 lever guide kit...................................425 power-trol lever...............................425 rockshaft cover set..........................425 rockshaft cover shield....................426 rockshaft covers...............................425 rockshaft lever lift control cables...... ...............................................................425 I Ignition parts cont... clamp...................................................376 clips......................................................376 coil bracket........................................375 coils............................................. 375, 378 condensor..........................................378 cover....................................................376 distributor..........................................378 dust cover...........................................376 gaskets...................................... 376, 378 points...................................................378 resistor.................................................376 rotor.....................................................378 rotor button.......................................378 spark plug wire sets........................377 spark plugs.............................. 377, 378 tags.......................................................377 terminal insulator assys.................375 tune-up kits.......................................378 wire holder.........................................377 wire set................................................378 Implement hex nut............................433 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. G Gears cont... transmission......................................410 Generator parts band cover.........................................384 belts......................................................383 brackets..............................................383 cut-out assy.......................................383 pulleys.................................................383 strap.....................................................383 tags.......................................................384 Governor bearings.............................360 Grilles, parts fastener stud assys..........................394 grilles...................................................394 rod.........................................................393 screens...................................... 392, 393 spring...................................................393 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere: Alphabetical index cont... S Seats, parts cont... side plates..........................................417 spring installation tool..................418 springs.................................................418 tie bar...................................................418 Sediment bowl assys., parts bail assys................................... 401, 402 diaphragm.........................................402 elbow...................................................402 gaskets...................................... 401, 402 glass bowls.............................. 401, 402 line fitting...........................................401 packing...............................................402 repair kit..............................................401 screens...................................... 401, 402 sediment bowl assys............ 401, 402 valves...................................................402 Serial number tags, parts rivets.....................................................392 tags.......................................................392 Spark plug covers, part.....................380 grommet.............................................380 Stabilizer bar........................................437 Starter hand cranks............................392 Starters, parts.......................................381 band cover.........................................381 bushing..................................... 381, 382 covers...................................................381 drives......................................... 380, 381 key.........................................................383 knob.....................................................383 levers.......................................... 381, 382 nut.........................................................382 repair studs........................................380 spring...................................................381 starter solenoids..............................380 switches.....................................381-383 tags.......................................................381 Steering parts shaft.....................................................413 Steering shaft parts ball kit..................................................413 bearings..............................................413 bushings................................... 413, 414 pin.........................................................413 repair end...........................................413 Steering wheels, parts caps......................................................413 nuts.......................................................412 plate........................................... 411, 413 spinner................................................412 starter crank......................................411 steering wheels...................... 411, 412 Steps............................................. 421, 422 bracket................................................422 Sway blocks................................ 436, 437 bushing...............................................436 332 T Tachometers bracket................................................369 cables...................................................370 fiber optic lead.................................369 knob.....................................................369 tachometers............................ 368, 369 Tail lights, parts bulbs.......................................... 390, 391 gaskets.......................................389-391 knob.....................................................390 lens............................................. 389, 390 reflector...............................................390 rings.....................................................390 switches..............................................390 tail lights................................... 389, 390 terminal...............................................390 Thermostats.........................................363 Three point hitch, parts balls......................................................434 bolt.......................................................435 bottom yoke......................................435 bracket................................................437 bushing...............................................434 chain....................................................434 clevises................................................433 crank handle.....................................435 crank handle locks..........................435 drawbar lift links..............................438 drawbar lock.....................................438 drawbars.............................................438 evener bar..........................................433 handle........................................ 434, 435 hook ends..........................................434 kits........................................................437 leveling screw...................................435 leveling screw & bottom yoke....435 lift arms...............................................436 lift link assys.......................................435 link knuckle.......................................433 pins...........................433, 433-436, 438 push rod..............................................433 push rod swivel................................433 rear draft link ends..........................436 return spring link.............................436 return springs...................................436 spring...................................................435 stabilizer bar......................................437 sway chain assy................................433 swivel end..........................................434 top links..............................................434 top yoke..............................................435 transport hook.................................434 upright assy.......................................435 Throttle parts discs......................................................404 end joint.............................................404 knobs...................................................404 levers....................................................404 plates...................................................404 shaft.....................................................404 T Throttle parts cont... springs.................................................404 Tie rod parts bars.......................................................414 boots....................................................415 dust cover...........................................415 ends......................................................415 Toolboxes..............................................421 Transmission parts gears.....................................................410 pickup magnet.................................410 seal........................................................410 shafts....................................................410 washer.................................................410 U Umbrellas..............................................441 V Valve & springs valve guides.............................341-343 valve spring retainer......................341 valve springs............................341-343 valves..........................................341-343 Valve cover gaskets............................345 Valve grind gasket sets........... 344, 345 Valve train kits.....................................340 Valves......................................................340 Voltage regulators conversion kit...................................384 regulators...........................................384 W Water pumps.............................. 364, 365 bypass plug.......................................364 plate.....................................................364 spacer..................................................365 Water temperature gauges gauges....................................... 367, 368 Weight, front bumper...............................................431 Wheels, front and rear bolts..................................429, 431, 433 front hub cap....................................430 inner tube valves.............................432 lock nuts.............................................430 nuts.......................................................432 reinforcing ring................................432 retainers..............................................430 rims............................................. 432, 433 seals......................................................430 stops.....................................................433 tires, tubes..........................................431 washer.................................................431 wheels....................................... 430, 431 Wiring harness kits................... 374, 375 Wittek hose clamps................. 363, 398 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm John Deere: Beginning serial numbers Model Unstyled A 1934...................... 410000 1935...................... 412869 1936...................... 424025 1937...................... 442151 1938...................... 466787 Model Styled A 1939...................... 477000 1940...................... 488000 1941...................... 499000 1942...................... 514127 1943...................... 523133 1944...................... 528778 1945...................... 548352 1946...................... 555334 1947...................... 578516 1948...................... 594433 1949...................... 620843 1950...................... 648000 1951...................... 667390 1952...................... 689880 Model AO / AR / AI 1936...................... 250000 1937...................... 253521 1938...................... 255416 1939...................... 257004 1940...................... 258045 1941...................... 260000 1942...................... 261558 1943...................... 262243 1944...................... 263223 1945...................... 264738 1946...................... 265870 1947...................... 267082 1948...................... 268877 1949......270646-271999 Model Styled AR 1949...................... 272000 1950...................... 272985 1951...................... 276078 1952...................... 279772 1953...................... 282551 Model Unstyled B 1935........................... 1000 1936.........................12012 1937.........................27389 1938.........................46175 Models BO & BR 1936...................... 325000 1937...................... 326655 1938...................... 328111 1939...................... 329000 1940...................... 330633 1941...................... 332039 1942...................... 332427 1943...................... 332780 1944...................... 333156 1945...................... 334219 1946...................... 335641 1947...................... 336746 D serial number located on rear of transmission case, back of the gear shift quadrant. Model Unstyled D 1924.........................30401 1925.........................31280 1926.........................35309 1927.........................43410 1928.........................54554 1929.........................71561 1930.........................95367 1931...................... 109944 1932...................... 115477 1933...................... 115665 1934...................... 116273 1935...................... 119100 1936...................... 125430 1937...................... 130700 1938...................... 138413 Model Styled D 1939...................... 143800 1940...................... 146566 1941...................... 149500 1942...................... 152840 1943...................... 155005 1944...................... 155426 1945...................... 159888 1946...................... 162598 1947...................... 167250 1948...................... 174879 1949...................... 183420 1950...................... 183516 1951...................... 189701 1952...................... 191180 1953...................... 191439 G serial number located on right side of tractor on main case in magneto or distributor area. Model Unstyled G 1938........................... 1000 1939........................... 7734 1940........................... 9321 1941.........................10489 1942.........................12069 Model Styled G 1942.........................13000 1943.......................______ 1944.........................13748 1945.........................13905 1946.........................16694 1947.........................20527 1948.........................28127 1949.........................34587 1950.........................40761 1951.........................47194 1952.........................56510 1953.........................63489 Model GP Standard 1928...................... 200111 1929...................... 202566 1930...................... 216139 1931...................... 224321 1932...................... 228666 1933...................... 229051 1934...................... 229216 1935...................... 230515 Model GP Wide Tread 1929...................... 400000 1930...................... 400936 1931...................... 402741 1932...................... 404770 1933...................... 405110 Model GP-O 1930.........................14994 1931.........................15000 1932.........................15226 1933.........................15387 1934.........................15412 1935.........................15589 H serial number located on right side of tractor on the main case in flywheel area. Model H 1939........................... 1000 1940.........................10780 1941.........................23654 1942.........................40995 1943.........................44755 1944.........................47796 1945.........................48392 1946.........................55956 1947.........................60107 L serial number stamped on plate attached to differential housing on rear of tractor. Model Unstyled L 1937...................... 621000 1938......621079-624999 Model Styled L 1938...................... 625000 1939...................... 626265 1940...................... 630160 1941...................... 634191 1942...................... 640000 1943...................... 640738 1944...................... 641038 1945...................... 641538 1946...................... 641938 Model LA 1941........................... 1001 1942........................... 5361 1943........................... 6029 1944........................... 6159 1945........................... 9732 1946.........................11529 M serial number stamped on plate attached to instrument panel under ignition switch lever. Engine number stamped on right front of cylinder block. Model M 1947.........................10001 1948.........................13743 1949.........................25604 1950.........................35659 1951.........................43525 1952.........................50580 Model MT 1949.........................10001 1950.........................18544 1951.........................26203 1952.........................35845 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com R serial number on right side of tractor on the main case in magneto or distributor area. Model R 1949........................... 1000 1950........................... 3541 1951........................... 6368 1952........................... 9293 1953.........................15720 1954.........................19485 Waterloo Boy: Model L & LA 1914........................... 1000 Waterloo Boy: Model N 1917.........................10020 1918.........................10221 1919.........................13461 1920.........................18924 1921.........................27026 1922.........................27812 1923.........................28119 1924.........................29520 Waterloo Boy: Model R 1915........................... 1026 1916........................... 1401 1917........................... 3556 1918........................... 6982 1919........................... 9056 Crawlers Model 40C 1953.........................60001 1954.........................63358 1955.........................66894 Model 420C 1956.........................80001 1957...................... 107813 1958...................... 127782 Model 430C 1958...................... 140001 1959...................... 142671 1960...................... 158632 Model BO Lindeman 1943...................... 332901 1944...................... 333110 1945...................... 333666 1946...................... 335361 1947...................... 336441 Model MC 1949.........................10001 1950.........................11630 1951.........................13630 1952.........................16309 40 serial number located on left side of tractor center frame near clutch bell housing. Engine number stamped on right front corner of cylinder block. Model 40 2 Row Utility 1953.........................60001 1954.........................60202 1955.........................63140 Model 40 Hi Crop 1954.........................60001 1955.........................60060 Model 40C 1953.........................60001 1954.........................63358 1955.........................66894 Model 40 Standard 1953.........................60001 1954.........................67359 1955.........................69474 Model 40 Tricycle 1953.........................60001 1954.........................72167 1955.........................75531 Model 40 Utility 1953.........................60001 1954.........................60202 1955.........................63140 50, 60, 70 & 80 serial number located on right side of tractor on the main case in magneto or distributor area. Model 50 1952....................5000001 1953....................5001254 1954....................5016041 1955....................5021977 1956....................5030600 Model 60 1952....................6000001 1953....................6007694 1954....................6027995 1955....................6042500 1956....................6057650 1957....................6063837 333 John Deere Model Styled AOS 1937................... AO-1000 1938................... AO-1539 1939................... AO-1725 1940................... AO-1801 Model Styled B 1939.........................60000 1940.........................81600 1941.........................96000 1942...................... 126345 1943...................... 143420 1944...................... 152862 1945...................... 173179 1946...................... 183673 1947...................... 199744 1948...................... 209295 1949...................... 237346 1950...................... 258205 1951...................... 276557 1952...................... 299175 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. A & B serial number located on right side of tractor on the main case in magneto or distributor area. John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere: Beginning serial numbers cont... Model 70 1953....................7000001 1954....................7005692 1955....................7017501 1956....................7034950 Model 80 1955....................8000001 1956....................8000775 320, 330, 420, 430, 435 serial number located on left side of tractor center frame near clutch bell housing. Engine number stamped on right front corner of cylinder block. Model 320 1956...................... 320001 1957...................... 321220 1958...................... 325127 Model 330, Standard 1958...................... 330001 1959...................... 330171 1960...................... 330935 Model 420 1956.........................80001 1957...................... 107813 1958...................... 127782 Model 430 1958...................... 140001 1959...................... 142671 1960...................... 158632 Model 435 1959...................... 435001 1960...................... 435961 520, 530, 620, 630, 720, 730; 820, 830 (2-Cyl.) serial number is located adjacent to the crankcase dipstick outlet situated in the lower right corner of the main case. Model 520 1956....................5200000 1957....................5202982 1958....................5209029 Model 530 1958....................5300000 1959....................5301671 1960....................5307749 Model 620 1956....................6200000 334 1957....................6203778 1958....................6215048 Model 620 Orchard 1958....................6211100 1959....................6223030 1960....................6223211 Model 630 1958....................6300000 1959....................6302749 1960....................6314381 Model 720 1956....................7200000 1957....................7203420 1958....................7217368 Model 730 1958....................7300000 1959....................7303761 1960....................7322075 1961....................7328801 Model 820 (2-Cylinder) 1956....................8200000 1957....................8200565 1958....................8203850 Model 830 (2-Cylinder) 1958....................8300000 1959....................8300727 1960....................8305301 820 & 830 (3-Cyl.) chassis serial number located below right side of grille screen. Engine number on right side of cylinder block. Model 820 (3-Cylinder) 1968.........................10000 1969.........................23100 1970.........................36000 1971.........................54000 1972.........................71850 1973.........................90200 1974...................... 109507 1975...................... 145500 Model 830 (3-Cylinder) 1974...................... 108507 1975...................... 155914 Model 840 1958....................8400000 1959....................8400506 1960....................8400845 1010 serial number stamped on plate attached to right side of engine block. Engine serial number embossed on right side at the rear of engine block. Model 1010 1961.........................10001 1962.........................23630 1963.........................32188 1964.........................43900 1965.........................52722 1020, 1520 chassis serial number located on right side of transmission case. Engine number on right side of cylinder block. Model 1020 1965.........................14501 1966.........................14682 1967.........................42715 1968.........................65184 1969.........................82409 1970...................... 102039 1971...................... 117500 1972...................... 134700 1973...................... 157109 Model 1520 1968.........................76112 1969.........................82405 1970...................... 102061 1971...................... 117500 1972...................... 134700 1973...................... 157109 1530 chassis serial number below right side of grille screen. Engine number on right side of cylinder block. Model 1530 1974...................... 108811 1974...................... 176601 1975....................145500L 2010 serial number stamped on plate attached to right side of engine block. Engine serial number embossed on right side at the rear of engine block. Model 2010 1961.........................10001 1962.........................21087 1963.........................31250 1964.........................44036 1965.........................58186 2020, 2030 chassis serial number located on right side of transmission case. Engine number on right side of cylinder block. Model 2020 1965.........................14502 1966.........................14680 1967.........................42721 1968.........................65176 1969.........................82404 1970...................... 102032 1971...................... 117500 Model 2030 1972....................134700T 1973....................157109T 1974....................187301T 1974....................140000L 1975....................213350T 1975....................145500L 2510, 2520 chassis serial number located on rear of transmission. Engine number on right side of cylinder block. Model 2510 1966........................... 1000 1967........................... 8958 1968.........................14291 Model 2520 1969.........................17000 1970.........................19416 1971.........................22000 1972.........................22911 1973.........................23865 2630 chassis serial number below right side of grille screen. Engine number on right side of cylinder block. Model 2630 1974...................... 188601 1975...................... 213360 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4555, 4560, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630 chassis serial number located on rear of transmission case. Engine serial number is on right side of cylinder block. Model 3010 1961........................... 1000 1962.........................19416 1963.........................32400 Model 3020 1964.........................50000 1965.........................68000 1966.........................84000 1967.........................97286 1968...................... 112933 1969...................... 123000 1970...................... 129897 1971...................... 150000 1972...................... 154197 Model 4000 1969...................... 211422 1970...................... 222143 1971...................... 250000 1972...................... 260791 Model 4010 1961........................... 1000 1962.........................20201 1963.........................38200 Model 4020 1964.........................65000 1965.........................91000 1966...................... 119000 1967...................... 145660 1968...................... 173982 1969...................... 201000 1970...................... 222143 1971...................... 250000 1972...................... 260791 Model 4025 Export 1969...................... 211000 1970...................... 222143 1971...................... 250000 1972...................... 260791 Model 4030 1973........................... 1000 1974........................... 6700 1975.........................10153 1976.........................13022 1977.........................15417 Model 4230 1973........................... 1000 1974.........................13000 1975.........................22074 1976.........................28957 1977.........................35588 Model 4320 1971........................... 6000 1972.........................17031 Model 4430 1973........................... 1000 1974.........................17500 1975.........................33050 1976.........................47222 1977.........................62960 Model 4520 1969........................... 1000 1970........................... 7005 Model 4620 1971.........................10000 1972.........................13692 Model 4630 1973........................... 1000 1974........................... 7022 1975.........................11717 1976.........................18392 1977.........................25794 Model 5010 1963........................... 1000 1964........................... 4500 1965........................... 8000 Model 5020 1966.........................12000 1967.........................15650 1968.........................20399 1969.........................24038 1970.........................26624 1971.........................30000 1972.........................30608 Model 6030 1972.........................33000 1973.........................33550 1974.........................34586 1975.........................35400 1976.........................36014 1977.........................36577 Model 7020 1971........................... 1000 1972........................... 2006 1973........................... 2700 1974........................... 3156 1975........................... 3579 Model 7520 1972........................... 1000 1973........................... 1600 1974........................... 3054 1975........................... 4945 Model 8020 (Rebuilt 8010) 1964........................... 1000 Model 8430 1975........................... 1000 1976........................... 1690 1977........................... 3962 1978........................... 5323 Model 8630 1975........................... 1000 1976........................... 2382 1977........................... 5222 1978........................... 7626 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price Manifolds, parts cont... Description / Application Manifold, Johnson Cold Gas Fits: Unstyled & Styled A up to SN: 487999, Replaces: A36R USA made NOTE: This manifold has a 4 bolt exhaust mounting flange. The tractor will run better and have more power than the stock all fuel manifold. JDS295 $258.50 JDS077 $178.35 Manifold, All-fuel Fits: Unstyled & Styled A up to SN:487999, Replaces: A36R NOTE: 4 bolt exhaust mounting flange. JDS471 $124.95 Manifold, All-fuel Fits: A SN: 488000 - 583999. (AR, AO SN: 272000 & up), Replaces: A2383R NOTE: Exhaust flange bolt holes are horizontal. JDS076 $159.95 Manifold, Gas Fits: A SN: 488000 - 583999 by using JDS369 pipe. Direct replacement for a SN: 584000 & up gas, Replaces: A3386R, A4039R NOTE: Exhaust flange bolt holes at angle. Order # Description / Application $153.60 Manifold Fits: B SN: 96000 - 200999 gas by using the JDS372 pipe; Direct replacement for: B SN: 201000 & up gas Replaces: B2472R NOTE: Exhaust flange bolt holes at angle. JDS073GK $15.95 Manifold Gasket Set Fits: B SN: 96000 & up Replaces: B1787R, 321R USA made NOTE: Fits manifold JDS073 & JDS438. JDS461GK $42.25 ABC2293 $1.50 JDS289 $275.00 Manifold, Johnson Cold Gas Fits: G (All Years) Replaces: F136R & F552R USA made NOTE: 2 bolt exhaust mounting flange, Exhaust flange bolt holes at angle. Tractor will run better & have more power - Gas or Propane Gasket Set Fits: D SN: 109944 & up Replaces: D1788R (manifold), 321R (carburetor) USA made Brass Manifold Nut Fits: A, B, H series (7/16"-14 NC) $32.10 Manifold Gasket Set Fits: All JD A Manifolds Replaces: A405R, A464R, A2384R, 321R USA made JDS436 $258.50 Manifold, All Fuel Fits: B up to SN: 60000 Replaces: B73R USA made NOTE: Exhaust flange bolt holes are vertical. JDS096 $175.75 JDS437 $258.50 Manifold, All Fuel Fits: B SN: 60000 - 96000 Replaces: B1313R USA made NOTE: Exhaust flange bolt holes are horizontal. Manifold, All-fuel Fits: G (All years) Replaces: F136R, F552R NOTE: Exhaust flange bolt holes at angle JDS096GK $25.25 Manifold Gasket Set Fits: All JD G manifolds Replaces: F137R, 321R USA made JDS296 $258.50 Manifold, Johnson Cold Gas Fits: B up to SN: 96000 Replaces: B73R, B1313R USA made NOTE: 4 bolt exhaust mounting flange to accept both 2 bolt exhaust pipes. Tractor will run better & have more power than stock all fuel manifold. JDS235GK $20.75 JDS132 $135.00 JDS132GK $25.00 JDS134 $139.95 JDS296GK JDS438 $27.95 $258.50 Manifold Gasket Set Fits: B up to SN: 96000, BR, BO Replaces: B74R, R520476 USA made NOTE: Fits manifold JDS296, JDS436 & JDS437 Manifold, All Fuel Fits: B SN: 96000 - 183971 Replaces: AB2846R, Casting #B1786R USA made NOTE: Exhaust flange bolt holes are horizontal. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Engine parts JDS076GK John Deere Price JDS073 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Manifolds, parts Manifold Gasket Set Fits: H Replaces: H137R, D1034R USA made Manifold Fits: Unstyled L Replaces: L849T Manifold Gasket (For JDS132) Replaces: L658T USA made Manifold Fits: L, LA, LI, LUC w/ JD engine SN: L640000 & up, Replaces: AL2841T Manifolds, parts continue on next page 335 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Engine parts Manifolds, parts cont... Order # Price JDS134GK $21.50 JDS134ELB $38.00 JDS001A Manifolds, parts cont... Description / Application Order # Price JDS1BCGK $13.60 Gasket Set fits: Same as JDS134 Replaces: L4135T (manifold), L681T (carburetor) USA made JDS1239 Elbow Fits: L, LA, LI, LUC w/ JD engine SN: L640000 & up NOTE: JDS838 elbow welded to muffler on page 350. $49.95 JDS004 $234.95 Manifold Fits: M, 40, 320 series Replaces: M408T, M1799T $7.95 JDS1151 $40.75 JDS001B $110.00 2-Piece Manifold, Int & Exh Fits: 50 Replaces: B3211R, B3212R JDS005 JDS1153 JDS001C 336 $242.95 2-Piece Manifold, Int & Exh Fits: 520, 530 Replaces: B3641R, B3642R Gasket Set (For JDS001A) Replaces: M1861T (manifold), M410T (carburetor) JDS005GK $28.50 JDS2645 $17.95 JDS006 $26.50 JDS059 $5.75 Manifold Heat Baffle Fits: 420 series Replaces: AM3009T USA made JDS002 $234.95 Manifold Fits: 430, 440 series gas Replaces: T10369T NOTE: Has correct joggle in exhaust. JDS002GK Manifold Heat Baffle Fits: M, 40, 320 series Replaces: AM315T USA made Manifold Fits: 420 series Replaces: M3956T, M3060T JDS1BCGK $13.60 Gasket Set (For JDS001C) Replaces: M3994T (manifold), M3993T (carburetor) USA made Manifold Heat Baffle Fits: 430, 440 series Replaces: AT10285 USA made $110.00 JDS001GK Description / Application Gasket Set (For JDS001B) Replaces: M3994T (manifold), M3993T (carburetor) USA made $40.75 Gasket Set Fits: 50, 520, 530 Replaces: (1) - AB4728R, AB5504R, (1) R100312, (2) - A4642R 26-piece Intake & Exhaust Manifold Bolt Kit fits: 50, 520, 530 USA made NOTE: Heat exchanger stud not included. Order JDS059 for stud & clamp. Heat Exchanger Fits: 50, 520, 530 Replaces: B3213R Heat Exchanger Clamp Stud & Nut Fits: All 2-cyl. tractors w/ heat exchanger, Replaces: A4645R (clamp), R32042R (stud), A4646R (nut) 2-Piece Manifold, Int & Exh Fits: 60, 620, 630 Replaces: A4640 (intake), A4641R, A5751R (exhaust) New & improved! $129.00 $28.50 Gasket Set Fits: 60, 620, 630 Replaces: (1) - AA7300R, (1) - R100312, (2) - A4642R STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS2634 $19.50 JDS074 $275.50 Manifolds, parts cont... Description / Application 36-piece Intake & Exhaust Manifold Bolt Kit fits: 60, 620, 630 gas USA made NOTE: Heat exchanger stud not included. Order JDS059 for stud & clamp. JDS2650 JDS075 JDS083GK $14.95 JDS1119 $14.95 JDS083 $194.90 JDS083GK $14.95 2-Piece Manifold, Int & Exh Fits: 720, 730 gas Replaces: F3034R, F3035R JDS477 $285.00 Gasket Set Fits: 720, 730 gas Replaces: A4631R, A4642R, AF1688R, AF2608R, AF3724R JDS477GK $49.95 Heat Exchanger Fits: 60, 620, 630, 70, 720, 730 Replaces: A4644R Gasket Set Fits: Same as JDS477 Replaces: R98843, R98837 (manifold),R98821 (carb) USA made JDS855 $284.95 1-Piece Manifold, Int & Exh (For vertical exhaust) Fits: 2020, 2030, 2510, 2520 Industrials: 400 series, 401 series, 440 series Skidder, 480 series Forklift (All w/ 180, 202, 300 4-cyl. gas engines), Replaces: T20247 JDS059 JDS855GK $44.75 JDS131 JDS135 $112.50 JDS131GK Gasket Set Fits: 70 gas Replaces: A4631R, A4642R, AF1688R, AF2608R, AF3724R 26-piece Intake & Exhaust Manifold Bolt Kit fits: 70, 720, 730 gas USA made NOTE: Heat exchanger stud not included. Order JDS059 for stud & clamp. $248.25 $22.50 $33.50 $5.75 $99.95 $10.50 Heat Exchanger Clamp Stud & Nut (For JDS003) Replaces: A4645R (clamp), R32042R (stud), A4646R (nut) Manifold, Exhaust (For vertical exhaust) Fits the following 3-cyl. diesel: 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2040, 2240 Industrials: 300, 300B, 301, 302, 380 Replaces: T20252 Manifold Gasket Set Fits: Same as JDS131 Replaces: T20006 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Manifold w/ 13" Exhaust Pipe (For vertical exhaust) Fits: 1010 gas Replaces: AT12741, AT13134, AT21368, AT21369, Casting # T19981 Gasket Set Fits: 1010 gas Replaces: AT12699, T268T Manifold Threaded Exhaust Pipe w/out Baffle fits: 1010 gas, LP Replaces: AT21163 (13" long, 50 mm x 1.5) NOTE: Will not fit 2010. Manifold (For vertical exhaust) Fits: 2010 gas Replaces: T13384, AT12461, AT22610 (2-11/16" c.c. bolt to bolt at carb attachment) Gasket Set Fits: 2010 gas Replaces: RE38560, T10079 1-Piece Manifold, Int & Exh 3-cyl. gas (For vertical exhaust) Fits: 1020, 1520 Industrials: 300, 301, 301A, 302, 302A, 380 Forklift (All gas) Replaces: T20251T Gasket Set Fits: Same as JDS855 Replaces: T20207, T20208, T10079, R98821,R98836, R98837 USA made Manifold, Exhaust (For vertical exhaust) Fits: 1830, 2020, 2030, 2120, 2130, 2440, 2510, 2520, 2630, 2640; Industrials: 310, 400, 401 series, 410, 440 series Skidder, 480 series Forklift (All w/ 4-cylinder diesel engine), Replaces: T20249 Manifolds, parts continue on next page 337 Engine parts JDS003 $21.50 Description / Application $349.95 John Deere JDS074GK $22.50 Price JDS237 2-Piece Manifold, Int & Exh Fits: 70 gas Replaces: F1421R, F1422R JDS074GK Order # All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Manifolds, parts cont... Order # JDS135GK JDS1018 Price Do not order by tractor model only. To ensure you order the correct rings, you will need the following information: Gasket Set Fits: Same as JDS135 Replaces: R90658 USA made 1 Bore size 2 Thickness of each ring. ABC2511 Order # $124.90 $3.95 Price ABC448 $17.90 Price Turbocharger to Exhaust Manifold Mounting Gasket Fits: 4050 thru 8650 Replaces: R43751 USA made NOTE: See website for full applications. ABC1835 ABC1844 ABC1846 338 $10.95 $15.95 $22.95 Application JDS2094 $98.50 JDS2094: 5-1/2" bore, (3) 0.250" compression rings, (2) 0.250" oil rings JDS2118 $142.75 JDS2118: 5-1/2" bore, (4) 0.187" JDS2120 $142.75 JDS2120: 0.045" overbore, 5.545" bore, (4) 0.187" compression rings, (1) 0.313" oil ring JDS2096 $150.00 JDS2096: 0.045" overbore, 5.545" bore, (3) 0.250" compression rings, (2) 0.250" oil rings JDS2122 $142.75 JDS2122: 0.090" overbore, 5.590" bore, (4) 0.187" compression rings, (1) 0.313" oil ring JDS2124 $142.75 JDS2124: 0.125" overbore, 5.625" bore, (4) 0.187" compression rings, (1) 0.313" oil ring Description / Application Exh Manifold Gasket Material (1/16" thick x 12" wide x 28-1/2" long) NOTE: Perforated steel core. $13.95 thickness per piston. Fits: Some A, 60 series 2-cyl. Gasket material - USA made Order # 3 Quantity of each ring Piston rings can not be returned if opened. Call or email for price and availability of other sizes. Turbo Exhaust Elbow Fits: 4320 Replaces: R46473 (3.900" outlet O.D.) ABC1830 Engine parts Piston ring sets - USA made Description / Application $16.95 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Manifolds, parts cont... compression rings, (1) 0.313" oil ring Fits: Some early B series up to SN: 60000 2-cyl. Cork / Rubber Rollpack Gasket Material For making general purpose Gasket (1/16" thick x 12" wide x 24" long) NOTE: Do not use for high temperature applications. Cork / Rubber Rollpack Gasket Material For making general purpose Gasket (3/32" thick x 12" wide x 24" long) NOTE: Do not use for high temperature applications. Gasket Paper For making general purpose Gasket (0.0160" thick x 18" wide x 98" long) NOTE: Do not use for high temperature applications. Gasket Paper For making general purpose gaskets (0.0275" thick x 20" wide x 108" long) NOTE: Do not use for high temperature applications. JDS2126 $60.75 JDS2126: 4-1/4" standard bore, (2) 0.187" compression rings, (2) 0.187" oil rings JDS2128 $60.75 JDS2128: 0.040" overbore, 4.290" bore, (2) 0.187" compression rings, (2) 0.187" oil rings Fits: 'Some' B series SN: 60000 - 201000 2-cyl., Replaces: AB2524R, AB3725R JDS2130 $99.75 JDS2130: 4-1/2" bore, (3) 0.187" compression rings, (1) 0.187" oil ring JDS2134 $99.75 JDS2134: 0.045" overbore, 4.545" bore, (3) 0.187" compression rings, (1) 0.187" oil ring Fits: Some B series (SN: 201000 & up), 50 2-cyl. JDS2132 $130.95 JDS2132: 4-11/16" bore, (4) 0.187" compression rings, (1) 0.313 oil ring JDS2136 $130.95 JDS2136: 0.045" overbore 4.732" bore, (4) 0.187" compression rings, (1) 0.313" oil ring JDS2138 $130.95 JDS2138: 0.090" overbore, 4.777" bore, (4) 0.187" compression rings, (1) 0.313" oil ring STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price Piston ring sets - USA made cont... Description / Application Order # Price Fits: Some 420, 430, 440 2-cyl. gas, LP series Fits: H, HN, HW series 2-cyl. Replaces: AH1131R JDS2158 $58.50 JDS2158: 3-9/16" standard bore, (2) 0.125" compression rings, (1) 0.125" & (1) 0.250" oil rings JDS2160 $58.50 JDS2160: 0.030" overbore, 3.592" bore, (2) 0.125" compression rings, (1) 0.125" & (1) 0.250" oil rings JDS2148 $48.50 JDS2148: 4-1/4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring JDS2145 $72.95 JDS2145: 0.045" overbore, 4.295" bore, (3) ABC2084 $56.75 $94.50 JDS2156: 3-1/2" standard bore, (2) 0.125" compression rings, (1) 0.093" oil ring JDS2140: 4" bore, (2) 0.156" & (1) 0.125" compression rings, (1) 0.250" oil ring JDS2144 $74.95 JDS2144: 0.040" overbore, 4.040" bore, (2) 0.156" & (1) 0.125" compression rings, (1) 0.250" oil ring Fits: Some M, MT, 40, 320, 330 series 2-cyl., Replaces: AM1625T $48.95 JDS2142: 4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring JDS2146 $74.95 JDS2146: 0.045" overbore, 4.045" bore, (3) 0.093" compression rings, (1) 0.250" oil ring $78.50 ABC2150: 4-1/4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring Fits: Some 4020 w/ 341" gas engine up to SN: 201000 6-cyl. ABC2152 $104.55 ABC2152: 4-1/4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring Engine overhaul kits Inframe or out of frame kits are available by special order for A thru 8640. For price and availability call, or visit Special Order Parts under Shop Online on our website. Rebore kits - USA made NOTE: Kit includes pistons, rings, wrist pins & clips. Aluminum pistons are designed for increased compression. Other sizes & models available by special order. Order # Price Description Applications Replacement number(s) Fits: A series up to SN: 584000, AO & AR up to SN: 272000 NOTE: Older serial numbers may require boring wrist pin bushing to 1.750" pin. JDS3031 $552.50 NEW! (0.090" overbore (5.590" diameter), 1.750" wrist pin, 5.545" compression height, 1.425" crown to top ring, aluminum pistons are designed for increased compression) JDS3034 $552.50 NEW! (0.125" overbore (5.625" diameter), 1.750" wrist pin, 5.545" compression AP134-125, SP134-125 height, 1.425" crown to top ring, aluminum pistons allow for increased compression) AP134-90, SP134-90 Rebore kits continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 339 Engine parts JDS2142 ABC2150 John Deere $49.95 ABC2084: 3-5/8" bore, (3) 0.093" compression rings, (1) 0.187" oil ring Fits: Some 3020 gas w/ 227" engine up to SN: 123000 Fits: Some M, MT series 2-cyl. Replaces: AM708T JDS2140 0.093" compression rings, (1) 0.250" oil ring Fits: 'Some' 1010 diesel, 2010 gas 4-cyl. Replaces: AT14702, AT11876 Fits: 'Some' LA, LUC 2-cyl. Replaces: AL20222 JDS2156 Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Piston ring sets - USA made cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Engine parts Rebore kits - USA made cont... NOTE: Kit includes pistons, rings, wrist pins & clips. Aluminum pistons are designed for increased compression. Other sizes & models available by special order. Order # Price Description Applications Replacement number(s) Fits: A series SN: 584001 & up, AO & AR SN: 272001 & up, 60 JDS3037 $412.75 NEW! (0.045" overbore (5.545" diameter), 5.625" compression height, 0.838" crown to top ring, aluminum pistons are designed for increased compression (approximately 6.5 to 1 compression ratio)) AP126-45, SP126-45, RKA1240-45 JDS3041 $412.75 NEW! (0.090" overbore (5.590" diameter), 5.625" compression height, 0.838" crown to top ring, aluminum pistons designed for increased compression (approximately 6.5 to 1 compression ratio)) AP126-90, SP126-90, RKA1240-90 JDS3043 $412.75 NEW! (0.125" overbore (5.625" diameter), 5.625" compression height, 0.838" crown to top ring, aluminum pistons are designed for increased compression (approximately 6.5 to 1 compression ratio)) AP126-125, SP126-125, RKA1240-125 Fits: B series SN: 96000 - 200999 JDS3045 $422.50 NEW! (0.090" overbore (4.590" diameter) w/ aluminum pistons designed for increased compression (approximately 6.3 to 1 compression ratio)) AP124-90, SP124-90 JDS3047 $422.50 NEW! (0.125" overbore (4.625" diameter) w/ aluminum pistons designed for increased compression (approximately 6.3 to 1 compression ratio)) AP124-125, SP124-125 Fits: B series SN: 201000 & up, 50 JDS3049 $319.75 NEW! (0.045" overbore (4.7325" diameter) w/ aluminum pistons designed for increased compression (approximately 6.8 to 1 compression ratio)) AP132-45, SP132-45, RKA1239-45 JDS3051 $319.75 NEW! (0.090" overbore (4.7775" diameter) w/ aluminum pistons designed for increased compression (approximately 6.8 to 1 compression ratio)) AP132-90, SP132-90, RKA1239-90 JDS3053 $319.75 NEW! (0.125" overbore (4.8125" diameter) w/ aluminum pistons designed for increased compression (approximately 6.8 to 1 compression ratio)) AP132-125, SP132-125, RKA1239-125 Fits: M, MC, MI, MT, 40, 320, 330 series JDS3055 $258.50 (0.045" overbore (4.045") w/ aluminum pistons designed for increased compression) AP338-45, SP338-45, RKA1276-45 JDS3057 $258.50 (0.090" overbore (4.090") w/ aluminum pistons designed for increased compression) AP338-90, SP338-90, RKA1276-90 JDS3059 $258.50 (0.125" overbore (4.125") w/ aluminum pistons designed for increased compression) AP338-125, SP338-125, RKA1276-125 Fits: 420, 430, 440 gas JDS3061 $316.90 (0.045" overbore (4.295") w/ aluminum pistons designed for increased compression) AP139-45, SP139-45, RKA1277-45 JDS3063 $316.90 (0.090" overbore (4.340") w/ aluminum pistons designed for increased compression) AP139-90, SP139-90, RKA1277-90 JDS3065 $316.90 (0.125" overbore (4.375") w/ aluminum pistons designed for increased compression) AP139-125, SP139-125, RKA1277-125 Valves & springs 10% stronger than OEM spring Order # Price Description Applications Replacement number(s) JDS926 $119.95 Valve Train Kit Fits: M, MC, MT, 40, 320, 330 gas NOTE: Kit includes NEW valves, guides, springs & locks. Does not include retainers. B367R, M40T, M100T, M102T, M1011T JDS923 $119.95 Valve Train Kit Fits: 420, 430, (440 up to SN: 448000) gas NOTE: Kit includes NEW valves, guides, springs & locks. Does not include retainers. B367R, M102T, M3036T, M3154T, M3153T 340 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS2149 $28.95 Description Exhaust Valve JDS2147 $22.95 Intake Valve JDS2157 $19.95 JDS2153 Applications Replacement number(s) Fits: A Series (up to SN: 487999), AO & AR (up to SN: 259999) NOTE: 2 used per tractor, sold individually. A588R, A4239R Valve Spring Fits: A series, 60, R, Replaces: A356R, R58R USA made NOTE: Fits intake & exhaust for engines w/out rotators. Also fits intake only when equipped w/ rotators. 4 used per tractor; Sold individually. 10% stronger than OEM spring. A356R, R58R $30.75 Valve Spring Retainer Valve Spring Retainer (For engines w/out rotators) fits: A series up to SN: 487999, AO & AR up to SN: 271999 USA made NOTE: 4 used per tractor; Sold individually. A245R JDS2151 $24.95 Valve Guide Fits: A series up to SN: 487999, AO & AR up to SN: 259999 NOTE: 4 used per tractor; Sold individually. A35R JDS2155 $29.95 Exhaust Valve JDS2159 $29.95 Intake Valve JDS2161 $19.95 Valve Spring (For tractors w/ rotators) fits: Some A series exhaust, 60 exhaust; 620, 630 (All) USA made NOTE: 10% stronger than OEM spring. 2 to 4 used per tractor; Sold individually. JDS2163 $8.95 Valve Guide Fits: A series SN: 488000 & up, AO & AR SN: 260000 & up), R, 60, A2467R, AA4897R (70 diesel), 80, (720 diesel), (730 diesel), (820, 830, 840 all 2-cyl.) NOTE: 4 used per tractor; Sold individually. JDS2169 $25.50 Exhaust Valve JDS2167 $19.95 Intake Valve Fits the following Unstyled models: B series up to SN: 95999, BO, B363R, B2878R BR NOTE: 2 used per tractor; Sold individually. B362R JDS2179 $25.50 Exhaust Valve JDS2175 $19.95 Intake Valve JDS2165 $19.95 JDS2173 Fits: A series SN: 488000 & up, AO & AR SN: 260000 & up, 60 NOTE: 2 used per tractor; Sold individually. All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Valves & springs cont... A454R, AA1810R A2335R, A3618R A4193R, A2334R, AA4928R A4936R B1793R, B2503R Valve Spring Fits: B series up to SN: 95999, BO, BR (All Unstyled) USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. B365R $19.95 Valve Spring (For tractors w/out valve rotators) fits: B series SN: 96000 & up, 50 USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. B1794R JDS2181 $19.95 Valve Spring (For exhaust only w/ valve rotators) fits: B series SN: 96000 & up, 50 USA made NOTE: 10% stronger than OEM spring. 2 to 4 used per tractor; Sold individually. B3331R JDS2171 $12.95 Valve Guide Fits: B series up to SN: 95999, BO, BR NOTE: 4 used per tractor; Sold individually. B358R, AB4058R JDS2177 $14.95 Valve Guide Fits: B series SN: 96000 & up, 50 NOTE: 4 used per tractor; Sold individually. B1927R, AB2859R JDS2183 $67.70 Intake / Exhaust Valve Fits: D, DI (both up to SN: 109943) NOTE: Intake & exhaust are the same. 4 used per tractor; Sold individually. D944R, D3410R JDS2189 $68.50 Intake / Exhaust Valve Fits: D, DI (both SN: 109944 & up) NOTE: Intake & exhaust are the same. 4 used per tractor; Sold individually. AD2379R, D3411R, D3121R, D1723R, AD1871R, AD2845R, D2287R JDS2185 $19.95 Valve Spring Fits: D, DI (both up to SN: 109943) USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. 485R JDS2192 $22.95 Valve Spring Fits: D, DI (both SN: 109944 & up) USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. D1724R John Deere Fits: B series SN: 96000 & up, 50 NOTE: 2 used per tractor; Sold individually. B1792R, B2863R Engine parts Valves & springs continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 341 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Engine parts Valves & springs cont... 10% stronger than OEM spring Order # Price JDS2187 $29.95 Valve Guide Fits: D, DI (both up to SN: 109943) NOTE: 4 used per tractor; Sold individually. 86R JDS2191 $19.95 Valve Guide Fits: D, DI (both SN: 109944 & up) NOTE: 4 used per tractor; Sold individually. D1719R, AD2701R JDS2200 $55.95 Exhaust Valve $35.65 Intake Valve Fits: G series SN: 13000 & up, 70 (All fuel only) NOTE: 2 used per tractor; Sold individually. F578R, AF750R JDS2202 JDS2195 $19.95 Valve Spring (For tractors w/out valve rotators) fits: G series, 70 gas, all fuel; 70 LP (intake only) USA made NOTE: 10% stronger than OEM spring. 2 to 4 used per tractor; Sold individually. F53R JDS2197 $19.95 Valve Guide Fits: G, GH, GM, GN, GW (All SN: 13000 & up; (70 All fuel, machine length to fit) NOTE: 4 used per tractor; Sold individually. F727R, AF751R JDS2206 $18.50 Exhaust Valve Fits: H, M, 40, 320, 330 series USA made NOTE: 2 used per tractor; Sold individually. H116R, H1110R, M101T JDS2204 $16.50 Intake Valve Fits: H series NOTE: 2 used per tractor; Sold individually. H115R JDS2199 $19.95 Valve Spring Fits: H series USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. H117R JDS2201 $15.25 Valve Guide Fits: H series NOTE: 4 used per tractor; Sold individually. H589R, AH1174R JDS2139 $25.25 Exhaust Valve JDS2141 $14.95 Intake Valve JDS2143 $11.50 Valve Spring Fits: L, LA, LI, LUC USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. L4593T JDS2154 $12.75 Valve Guide Fits: L, LA, LI, LUC NOTE: 4 used per tractor; Sold individually. L826T JDS2218 $47.50 Exhaust Valve Fits: R, 70, 720, 730 diesel NOTE: 2 used per tractor; Sold individually. AR584R, F3214R, AF3192R JDS2216 $31.75 Intake Valve Fits: R, 70 diesel NOTE: 2 used per tractor; Sold individually. R57R, AR585R JDS2220 $35.95 Intake Valve Fits: 720, 730 diesel NOTE: 2 used per tractor; Sold individually. F3213R, AF3191R JDS2210 $40.95 Exhaust Valve JDS2208 $39.95 Intake Valve Fits: Styled A w/ Heisler cylinder head, 70 gas, LP NOTE: 2 used per tractor; Sold individually. JDS2212 $51.50 Exhaust Valve JDS2269 $42.50 Intake Valve JDS2207 $19.95 Valve Spring Fits: 70D, 720D, 730D (Diesel ONLY) USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. JDS2205 $19.95 Valve Spring (For tractors w/ valve rotators) fits: 70 exhaust only, 720, 730 gas, F1114R LP, All fuel USA made NOTE: 10% stronger than OEM spring. 2 to 4 used per tractor; Sold individually. JDS2203 $19.25 Valve Guide Fits: 70 gas, LP NOTE: 4 used per tractor; Sold individually. F1222R, AF1456R JDS2214 $18.95 Valve Guide Fits: 720, 730 gas, LP NOTE: 4 used per tractor; Sold individually. F3169R, AF3138R JDS2228 $24.50 Exhaust Valve $17.95 Intake Valve Fits: 520, 530 gas, LP NOTE: 2 used per tractor; Sold individually. B3750R JDS2226 JDS2213 $19.95 Valve Spring Fits: 520, 530 USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. B3751R JDS2211 $19.95 Valve Guide Fits: 520, 530 NOTE: 4 used per tractor; Sold individually. B3757R, AB5272R 342 Description Applications Fits: L, LA, LI, LUC NOTE: 2 used per tractor, sold individually. Fits: 720, 730 gas, LP NOTE: 2 used per tractor; Sold individually. Replacement number(s) F577R, AF749R L822T, AL822T L821T, AL821T F1220R F1219R F2709R, R20247, AF2881R F2708R, AF2880R F2143R B3749R STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS2230 $36.50 Description Applications Exhaust Valve JDS2232 $24.95 Intake Valve JDS2215 $18.95 Valve Guide Fits: 620, 630 gas, LP NOTE: 4 used per tractor; Sold individually. A5707R, AA6769R JDS2224 $48.50 Exhaust Valve R1337R, AR1383R JDS2222 $34.95 Intake Valve Fits: 80, 820, 830, 840 2-cyl NOTE: 2 used per tractor, sold individually. JDS2209 $19.95 Valve Spring Fits; 80, 820, 830, 840 2-cyl. USA made NOTE: 10% stronger than OEM spring. 4 used per tractor; Sold individually. R1338R Order # Price JDS3016 $155.00 Fits: A series up to SN: 487999, (AO, AR up to SN: 259999), Replaces: AA4283R, RE524131 JDS1333 $92.80 Fits: A, AN, ANH, AWH (All SN: 488000 & up), (AO, AR SN: 260000 - 281199) Replaces: AA4284R, AA4285R, RE524328, RE524329 USA made JDS1335 does not include cranks seals, oil pump gaskets or main bearing housing gaskets. Price JDS1082 $157.95 JDS1329 JDS1331 Application JDS1856 Fits: 420, 430, (440 gas, LP) Replaces: AM3188T, RE526888 USA made JDS1337 Fits: B, BN, BNH, BW, BWH SN: 96000 200999, Replaces: AB3876R, RE524344 USA made JDS1340 $185.00 Fits: 50 Replaces: AB4677R, RE540879 New and improved! $242.50 Fits: 60 Replaces: AA5371R, RE526774 $99.95 Fits: D, DI SN: 109944 & up, W111, W113 Stationary engines, Replaces: AD2675R, RE524062 USA made NEW! Fits: G series SN: 7100 & up Replaces: AF1076R, RE524065 USA made $89.95 $97.00 $198.50 Application Fits: M, 40, 320, 330 series Replaces: AM2153T, RE526701 Fits: Unstyled B series up to SN: 59999, BO, BR up to SN: 328999 Replaces: AB3874R, RE526784 USA made Fits: B, BN, BNH, BW, BWH (All SN: 201000 & up), Replaces: AB3877R, RE524332 USA made JDS2371 R1336R, AR1384R Engine parts JDS2489 $199.95 A5627R, AA6584R John Deere JDS2377 $114.25 A5628R, R20246, AA6585R Engine gasket sets cont... NOTE: Includes sealing washers for cylinder head. Unless noted Order # Replacement number(s) Fits: 620, 630 gas, LP NOTE: 2 used per tractor; Sold individually. Engine gasket sets All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Valves & springs cont... JDS1675 $253.75 Fits: 70 gas, LP Replaces: AF1681R, AF1682R, RE526777 JDS3131 $166.99 Fits: H, HN, HWH, HNH Replaces: AH1160R USA made $248.50 NEW! Fits: 620, 630 gas, LP Replaces: AA6848R, AA6849R, RE526775 Engine gaskets sets continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 343 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Engine parts Engine gasket sets cont... Valve grind gasket sets NOTE: Includes sealing washers for cylinder head. Unless noted NOTE: Includes all gaskets & sealing washers required when does not include cranks seals, oil pump gaskets or main bearing replacing the cylinder head. housing gaskets. Order # Price JDS3135 $248.50 Order # Application JDS817 Price Valve Grind Gasket Set Fits: Styled A, AH, AN, AW, AWH (All SN: 488000 & up), (AR, AO both SN: 272000 - 281999), Replaces: A2329R NEW! Fits: 720, 730 gas, LP Replaces: AF3331R, AF3332R, RE524407 JDS1804 JDS813 $199.95 $82.95 Valve Grind Gasket Set Fits: Styled B, BN, BNH, BW, BWH (All SN: 96000 & up), (50 All Fuel only) Replaces: B1785R, B3089R Fits the following diesels: 70, 720, 730 Replaces: AF3906R, AF2248R, RE524072 USA made JDS3144 JDS007VGK $335.00 $55.65 Valve Grind Gasket Set Fits: M, MC, MT, 40, 320, 330 gas Replaces: AM808T, RE527354 USA made NEW! Fits: 80, 820, 830, 840 (All 2-cyl.) Replaces: AR1419R, AR1889R, RE524137 JDS1668 $108.50 JDS3128 $128.50 JDS1670 $159.50 Cylinder heads Order # Price JDS1020 $517.25 JDS852 JDS007 JDS082 344 Description / Application $84.95 Description / Application Cylinder Head (Bare, No Valves) Fits: A series up to SN: 487999, (AO, AR up to SN: 259999), Replaces: AA464R, Casting # A587R NOTE: Includes push rod tubes, seats, guides. Customer is responsible for ALL final machining. $459.95 Cylinder Head (Bare, No Valves) Fits: Unstyled B, BN, BW up to SN: 59999, (BR, BO both up to SN: 328999) Replaces: AB311R, Casting # B357R NOTE: Includes push rod tubes, guides. Does not include seats. Customer is responsible for ALL final machining Valve, Ring & Cylinder Replacement Gasket Set fits: 50 gas, LP Replaces: AR21784, RE526781 NOTE: Also known as a rebore gasket set. NEW! Valve Ring & Cylinder Replacement Gasket Set Fits: 60 gas, LP Replaces: AA5371R, RE526774 NOTE: Also known as a rebore gasket set. Valve Ring & Cylinder Gasket Set Fits: 70 gas, LP Replaces: AR21787, RE524083, RE526777 $430.00 Cylinder Head (Bare) w/ Seats & Valve Guides fits: M, MC, MT, 40, 320, 330 gas Replaces: AM239T, Casting # M56T, M1768T NOTE: Does not include valves, springs, studs. Customer is responsible for all final machining (grind valves to match the seats & size the guides to the valves etc.). $478.95 Cylinder Head w/ Seats & Valve Guides Fits: 420, 430, (440 up to SN: 448000) gas Replaces: AM3058T, Casting # M3035T, M3995T NOTE: Customer is responsible for all final machining (grind valves to match the seats & size the guides to the valves etc). JDS082VGK $59.50 JDS1672 $122.50 Valve Grind Gasket Set Fits: 420, 430, 440 gas Replaces: AM3189T, RE525796 USA made NOTE: Pan gasket not included. NEW! Valve Ring & Cylinder Replacement Gasket Set Fits: 520, 530 gas, LP Replaces: AB5559R, RE524061 NOTE: Also known as a rebore gasket set. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS1677 JDS3133 JDS3138 JDS3141 Price $122.50 $189.95 $136.50 $168.50 Description / Application Valve, Ring & Cylinder Replacement Gasket Set Fits: 620, 630 gas, LP Replaces: AA7354R, RE526582 NOTE: Also known as a rebore gasket set. Valve cover gaskets - USA made cont... Order # Price Fits: 420, 430, 440 gas, LP Replaces: M3066T NEW! Valve Ring & Cylinder Replacement Gasket Set Fits: 720, 730 gas, LP Replaces: AF3331R, RE524407 NOTE: Also known as a rebore gasket set. JDS925 NEW! Valve Ring & Cylinder Replacement Gasket Set Fits: 70, 720, 730 diesel Replaces: AF3907R, RE524073 NOTE: Also known as a rebore gasket set. JDS928 NEW! Valve Ring & Cylinder Replacement Gasket Set Fits: 80, 820, 830, 840 (All 2-cyl.) Replaces: AR1418R, AR1888R, RE524141 NOTE: Also known as a rebore gasket set. JDS931 $13.95 Fits: 50 Replaces: B3221R $13.95 Fits: 60 Replaces: A4629R $13.95 Fits: 70 gas only Replaces: F1179R JDS933 $13.95 Fits: 620, 630 Replaces: A5650R Application JDS1690 $15.95 Fits: A, AO, AR (All serial numbers) Replaces: A1575R JDS937 Camshaft bearings / bushings Order # Price JDS2753 $56.25 Description / Application NEW! 2-piece Camshaft Bearing (Bushing) Set fits: M, MT, 40, 320, 330, 420, 430, 440 gas, LP, Replaces: M761T, M762T USA made $13.95 Fits: G (All serial numbers) Replaces: F129R JDS941 Fits the following w/ 115, 145, 165 gas engines: 1010, 1010C, 2010, 2010C; Combines: 40, 45 Replaces: T12618, T18584 $13.95 Fits: B, BO, BR (All serial numbers) Replaces: B1498R JDS939 Engine parts Price $13.95 John Deere Order # Application JDS2611 $6.95 Valve cover gaskets - USA made JDS922 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Valve grind gasket sets cont... JDS2751 $7.45 Fits: M, 40, 320, 330 Replaces: M230T STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $5.35 NEW! Camshaft Bearing / Bushing Fits: 3010 thru 4020 gas, diesel; 4040 thru 8850 diesel, Replaces: R46903 USA made NOTE: 3 used per 4-cyl. tractor, 4 used per 6-cyl. tractor, 5 used per 8-cyl. tractor; Sold individually. See website for full applications. 345 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Crankshaft bearings NOTE: Measure bearings before ordering, no returns if package has been opened. Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications. Order # Price Description Applications Replacement number(s) Fits: A, 60 series (SN: 488000 & up using connecting rod A4648R) JDS2564 $23.95 Connecting Rod Bearing (For 3.000" standard rod journal) A4649R, AA5351R JDS2566 $23.95 Connecting Rod Bearing (For 0.010" (2.990") undersize crankshaft journal) JDS2568 $23.95 Connecting Rod Bearing (For 0.020" (2.980") undersize crankshaft journal) AA6089R Fits: B, 50 series (SN: 96000 & up using connecting rod B3201R) JDS2556 $27.50 Standard Connecting Rod Bearing (For standard (2.750") rod journal) JDS2558 $27.50 Connecting Rod Bearing (For 0.010" (2.740") undersize rod journal) JDS2560 $27.50 Connecting Rod Bearing (For 0.020" (2.730") undersize rod journal) AB4627R, AB4941R, B3202R, B3470R AB4944R Fits: M, MT series; Early 320 up to SN: 320854 JDS2550 $28.50 Standard Connecting Rod Bearing (For standard (2.250") rod journal) JDS2552 $28.50 Connecting Rod Bearing (For .010" (2.240") undersize rod journal) JDS2554 $28.50 Connecting Rod Bearing (For .020" (2.230") undersize rod journal) AM715T Fits: 40, (320 SN: 320855 & up), 330, 420, 430, 440 gas, LP JDS2570 $24.95 Standard Connecting Rod Bearing, (For 2.499" standard rod journal) JDS2572 $24.95 Connecting Rod Bearing (For 0.010" (2.489") undersize rod journal) JDS2574 $24.95 Connecting Rod Bearing (For 0.020" (2.479") undersize rod journal) AM1783T, M1847T Engine parts John Deere Fits: M, MC, MT, 40, 320, 330, 420, 430, 440 gas, LP JDS2906 $124.95 NEW! Main Bearing Set (For standard (2.398") main journal size) JDS2908 $124.95 NEW! Main Bearing Set (For 0.010" (2.388") undersize main journal) USA made JDS2910 $124.95 NEW! Main Bearing Set (For 0.020" (2.378") undersize main journal) USA made JDS2912 $124.95 NEW! Main Bearing Set (For 0.030" (2.368") main journal size) AM718T, AM724T AM3168T, AM3170T Fits the following gas, diesel: 1010, 2010; Fits the following gas, LP: 1020, 2020, 2030, 2510, 2520; Industrials: 300, 300B, 301, 350, 350B, 380, 400, 410, 450, 480 JDS2576 $17.25 Standard Connecting Rod Bearing (For standard 2.309" rod journal) AT324T, AT10123, T18925 JDS2578 $17.25 Connecting Rod Bearing (For 0.010" (2.299") rod journal) AT21117, T23561 JDS2580 $17.25 Connecting Rod Bearing (For 0.020" (2.289") rod journal) AT21119, T23563 Fits gas, LP, diesel: 3010 thru 4020, (Late 4040), 4050, 4230, 4240, 4320, 4430, 4520, 4620, 4630, 7020 NOTE: See website for more applications. JDS2582 $15.05 Connecting Rod Bearing (For standard 2.999" rod journal) R26087, R44378, R44924, AR45723 JDS2584 $15.05 Connecting Rod Bearing (For 0.010" (2.989") undersize rod journal) R44926, AR46396 JDS2586 $15.05 Connecting Rod Bearing (For 0.020" (2.979") undersize rod journal) R28228, R44927, AR46397 Crankshaft seals Order # Price JDS2644 $12.95 346 Crankshaft seals cont... Description / Application Order # Flywheel Spacer Washer (Oil Seal) Fits: A series up to SN: 671594, (AO, AR up to SN: 276577), D SN: 53388 & up, G series Replaces: D2124R (3.205" O.D., 2.735" I.D., 0.365" width) USA made NOTE: Cork. JDS2503 Price $8.50 Description / Application Flywheel Spacer Washer (Oil Seal) Fits: Unstyled & Styled B series using AB251R or AB4109R spacer Replaces: B130R (2.648" O.D., 2.240" I.D., 0.320" width) USA made NOTE: Cork. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price ABC2831 $13.50 ABC2835 $19.95 ABC2841 $19.95 ABC1630 $7.95 EACH ABC2064 (Front) $19.95 ABC2067 (Rear) $29.99 JDS903 $7.85 NEW! Rear Crankshaft Seal Fits: M, MT, 40, 320, 330, 420, 430, 440 gas Replaces: AM220T (5.004" O.D., 4.000" I.D., 0.312" width) NEW! Clutch Side Main Bearing Seal Fits: 620, 630, 720, 730 gas, diesel Replaces: AF2659R (5.004" O.D., 4.000" I.D., 0.500" width) NOTE: See website for full applications. Crankshaft End Seal (For Pony motor) Fits: 70D, 720D flywheel side up to SN: 7214899, All SN's for crank gear side, 80, 820 w/ Pony motor, Replaces: AF2167R (1.503" O.D., 1.000" I.D., .250" width) NOTE: 2 used per tractor; Sold individually. Crankshaft Oil Seal Fits: Late 3010, 3020, 4000, Late 4010, 4020, 4040, 4050, 4055, 'some' 4230 - 6030, 7020 - 9100 ABC2064 Replaces: AR49025 (3.361" O.D., 2.425" I.D., 0.385" width) ABC2067 Replaces: RE520036 (5.750" O.D., 5.000" I.D., 0.400" width) NOTE: See website for full applications. These are Teflon coated seals, do not prelube these seals. Fits: A, AN, AHN, AW, AWH (All w/ SN:424025 & up), (AI, AO, AOS, AR SN: 251486 & up), B series, G series, 50, 60, 70 gas, LP, 520, 530, 620, 630, 720 gas, LP, 730 gas, LP, Replaces: B250R USA made Order # Description / Application Oil Line / Fuel Gland & Nut (For 5/16" line) Fits: A, B, D, G, GP, H, Stationary engine W Replaces: E2150R (gland), A2069A (nut) NOTE: Build your own lines. Oil Line Fitting Fits: All 2-cylinders thru 830 (1/8" pipe to 1/2" inverted flare, fits 5/16" tube) USA made NOTE: Brass. Oil caps Order # Price Description / Application IHS406 $38.50 Oil Fill / Breather Cap w/ Clip, Copper Filter Element fits: L, LA, LI, M, MC, MT, MI, 40, 320,330, 420, 430, 440 gas, Replaces: AM669T (3-1/4" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe. JDS500 $32.50 Oil Fill / Breather Cap (Hydraulic Reservoir Cap) w/ Clip, Copper Filter Element Fits: M, MC, MT, MI, 40, 320, 330, 420, 430, 1010, Replaces: AM494T, AM1578T, AM1586T (1-1/2" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe. ABC042 $12.95 Front Crankshaft Oil Seal Fits: 820 3-cyl thru 2955, 3030 thru 4050, 5036 thru 7600 Replaces: AT21608, AR67942 (3.000" O.D., 2.175" I.D., 0.380" width) NOTE: See website for full applications. Oil pump drive shaft coupling Description Price $8.95 Oil Fill / Breather Cap w/ Clip & Filter Element Fits: Same as JDS500 (1-1/2" tall) NOTE: Economy style. Oil pan drain plug parts - USA made Order # Price ABC540 $2.95 Washer / Gasket fits: M thru 4960, some Industrials, Replaces: AT13560, AT17815, M1038T, T13213,T19574 (.875" I.D.) NOTE: Copper. ABC2026 $1.49 Oil Drain Plug Washer (For engine, transmission, etc.) Fits: 50 - 840 2-cyl., 3010 - 9120 Replaces: A4827R (1.257" O.D., 0.058" thick, 1.002" hole I.D.) NOTE: Aluminum finish. Multiples used per tractor; Sold individually. Price Oil Pump Drive Shaft Coupling........................... JDS1039........$19.95 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Oil pan drain plug parts continue on next page 347 Engine parts $9.95 NEW! Front Crankshaft Seal Fits: L, LA, M, MT, 40, 320, 330, 420, 430, 440 gas Replaces: AL2653T, AR608R (2.004" O.D., 1.125" I.D., 0.250" width) Order # JDS1011 John Deere ABC2069 Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Oil line fittings Crankshaft seals cont... Order # Price JDS1659 $11.40 Flywheel ring gears Description / Application Oil Pan Gasket Fits: M series, 40, 320, 330, 420, 430, 440 gas, LP, Replaces: M85T JDS2839 JDS2843 JDS2847 $16.95 $19.95 $15.85 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Oil pan drain plug parts - USA made cont... Order # NEW! Oil Pan Gasket Set Fits: Some 1010 gas Rowcrop, 1010 gas Rowcrop Utility, 2010 gas, LP, diesel (All w/ cast iron oil pan) Replaces: T15018, R98835 NEW! Oil Pan Gasket Set Fits: 3010, 3020, (500, 510 series Industrial) gas, diesel, Replaces: R71917 NOTE: Includes filter cover gasket & o-rings. NEW! 6-piece Oil Pan Gasket Set Fits: 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7800, 8430, 8440, 8450, 8560, 8570 gas, LP, diesel (All w/ cast iron oil pan), Replaces: R71918, R520583 NOTE: Has separate oil filter gasket & o-ring. See website for full applications. Application JDS775 $125.95 Fits: A SN: 477000 - 583999, G SN: 26000 & JDS773 $125.95 Fits: A SN: 584000 & up, AO, AR SN: 272000 JDS771 $115.20 JDS847 $125.20 Fits: 70, 720, 730 (All gas) JDS839 $125.20 Fits: 620, 630 JDS841 $99.95 Fits: L, LA, LI; Engine: LU; Combines: 11A, 12A, Replaces: AL4111T NOTE: 96 teeth. JDS843 $99.95 Fits: M, 40, 320, 330, 420, 430, 435, 440 series gas, diesel, Replaces: M21T, AM648T NOTE: 105 teeth. JDS845 $80.95 Fits the following w/ Pony motor: R, 70D, 80, 720D, 730D, 820, 830 Replaces: F2265R NOTE: 75 teeth. up, 70 diesel, 720 diesel, 730 diesel Replaces: A2238R NOTE: 168 teeth. & up, 60, Replaces: A3323R, AA4240R NOTE: 160 teeth. Fits: Styled B SN: 201000 & up, 50, 520, 530 Replaces: B2462R NOTE: 170 teeth. Replaces: F1227R NOTE: 210 teeth. Replaces: A5641R NOTE: 200 teeth. Restoration quality mufflers Oil filters, part - USA made Engine parts Price NOTE: Baffled like original. Order # Order # Price Description / Application ABC218 $11.40 Oil Filter fits: A, B, (D SN: 146500 & up), G, R, 50, 60, 70, 350C, 350D, 500, 500A, 500C, 510, 520, 530, 600, 620, 630, 720, 730, 1020, 1520, 2020, 2030, 2510, 2520, 2630, 2640, 2840, 2940, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4520, 4620 gas, LP, diesel Replaces: AA3680R, AR26350 (6-7/16" tall, 3-1/8" wide) ABC217 348 JDS2486 $7.50 Oil Filter Lower Sealing Plate Fits: M series, 40, 320, 330, 420, 430, 440 gas, LP, (1010 & 2010 up to SN: 42000 gas, LP, diesels), Power Units w/ cartridge type filters, Replaces: M88T (3" dia.) Application Fits: Unstyled A up to SN: 476999; G, 60, $132.50 70, 620, 630, 720, 730 Replaces: AF3770R, AA2214R JDS442: No indentation. High temperature paint. $68.50 JDS2486: No indentation. Polished stainless steel. Can discolor from extreme heat. $12.60 Oil Filter fits: H, M, 40, 320, 330, 420, 430, 440 series gas, LP; 1010, 2010 both up to SN: 42000 gas, LP, diesel Replaces: AH812R, AH1082R (4-1/8" tall, 3-1/4" wide) JDS2005 JDS442 Price JDS442 JDS714 JDS2486 JDS442, JDS2486 (Vertical round body) dimensions: Inlet length: N/A, Inlet I.D.: 4 bolt base plate, Shell length: 20.850", Shell diameter: 3.735", Outlet length: N/A, Outlet O.D.: 2.440", Overall length: 23-3/4" $107.25 Fits: A SN: 477000 - 487999 (1939) Replaces: AA1778R USA made JDS714 (Vertical round body) dimensions: Inlet Length: 3 Bolt casting, Shell length: 19", Shell diameter: 3-3/4", Outlet O.D.: 2-1/2", Overall length: 24-3/8" STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS462 $68.50 JDS2491 $132.50 Description / Application Fits: Styled A SN: 488000 & up (1940 & up) Replaces: AA2214R JDS642: Has correct height w/ indentation for steering shaft. High temperature paint. Restoration quality mufflers cont... Order # Price JDS691 $59.95 JDS2494 $132.50 JDS462 JDS362 JDS2491 $125.00 JDS691 JDS2494 JDS248 $39.95 JDS2419 $98.50 Fits: Unstyled B up to SN: 60000 Replaces: AB209R USA made $125.00 JDS615 $59.95 JDS2484 $132.50 JDS248 JDS2419 JDS250 $34.50 JDS2421 $98.50 Fits: B SN: 96000 & up Replaces: AB2700R JDS615: High temperature paint. JDS615 JDS435 JDS2484 $104.70 JDS250 JDS2421 JDS251 $22.50 JDS2448 $39.50 Fits: H Replaces: AH519R USA made JDS435 dimensions: Inlet length: 3 bolt casting, Inlet I.D.: 1.860", Shell length: 14-7/8", Shell diameter: 3", Outlet length: 8-3/4", Outlet O.D.: 1.885", Overall length: 27" (If raincap is needed - order RCS004) Fits: 330, (420 SN: 135026 & up), 430, 435, 440 diesel, (440 gas SN: 442887 & up), 1010 gas (All w/ vertical exhaust) Replaces: AT10646 JDS250: Includes clamp. High temperature paint. JDS2421: Includes clamp. Polished stainless steel. Can discolor from extreme heat. JDS2484: Polished stainless steel. Can discolor from extreme heat. JDS615, JDS2484 dimensions: Inlet length: N/A, Inlet I.D.: N/A, Shell length: 18.200", Shell diameter: 3.150", Outlet length: 6.280", Outlet O.D.: 1.875", Overall length: 24.600" (If raincap is needed - order RCS004) JDS248, JDS2419 (Vertical & horizontal round body) dimensions: Inlet length: 2-1/4", Inlet O.D.: 1.900", Shell length: 14-1/2", Shell diameter: 3-1/4", Outlet length: 3-1/2", Outlet O.D.: 1.650", Overall length: 20-1/2" (If raincap is needed - order RCS003) JDS250, JDS2421 (Vertical round body) dimensions: Inlet length: 1-5/8", Inlet I.D.: 2", Shell length: 14", Shell diameter: 4-1/8", Outlet length: 1-5/8", Outlet O.D.: 2-1/8", Overall length: 17-1/4" (If raincap is needed - order RCS005) Exhaust adapter fits: 330, (420 SN: 135026 & up), 430, (440 gas SN: 442887 & up) Replaces: AT10523, AM3247T JDS251: Stamped 2 bolt mounting flange. High temperature paint. JDS2448: Stamped 2 bolt mounting flange. Polished stainless steel. Can discolor from extreme heat. JDS251 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com JDS2448 JDS251, JDS2448 dimensions: Inlet I.D.: 1-7/8", Outlet O.D.: 2", Overall length: 7-1/2" Restoration quality mufflers continue on next page 349 Engine parts JDS604 dimensions: Inlet length: 3 bolt casting, Inlet I.D.: 1.910", Shell length: 17", Shell diameter: 3", Outlet length: N/A, Outlet O.D.: 2", Overall length: 21" Fits: M, 40, 320, (Serviceable, 420 up to SN: 135025), (Serviceable, 440 gas up to SN: 442886) series, Replaces: AM364T, AM625T JDS248: Has stamped 2 bolt mounting flange. High temperture paint. John Deere Fits: Early Styled B SN: 60000 - 95999 (1939-40), Replaces: AB1524R USA made JDS691, JDS2494 (Vertical round body) dimensions: Inlet length: N/A, Inlet I.D.: Back plate, Shell length: 18.200", Shell diameter: 3.150", Outlet length: 6.280", Outlet O.D.: 1.875", Overall length: 24.600" (If raincap is needed - order RCS004) JDS2419: Has 2 bolt mounting flange. Polished stainless steel. Can discolor from extreme heat. JDS362 dimensions: Inlet length: 3 bolt casting, Inlet I.D.: 1.910", Shell length: 23-1/2", Shell diameter: 3", Outlet length: N/A, Outlet O.D.: 2", Overall length: 26-7/8" JDS604 Fits: 50, 520; Serviceable for 530 Replaces: AB4486R JDS691: High temperature paint. JDS2494: Polished stainless steel. Can discolor from extreme heat. JDS2491: Polished stainless steel. Can discolor from extreme heat. JDS462, JDS2491 (Vertical round body) dimensions: Inlet length: N/A, Inlet I.D.: 4 bolt base plate, Shell length: 20.850", Shell diameter: 3.735", Outlet length: N/A, Outlet O.D.: 2.440", Overall length: 21-1/8" Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Restoration quality mufflers cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Engine parts Restoration quality mufflers cont... Order # Price JDS1016 $98.00 Economy mufflers - USA made cont... Description / Application Order # Price Description / Application JDS253 $28.25 Fits: B, BN, BW gas, All-fuel SN: B96000 & up; 50, 520 (standard muffler), 530 (optional muffler) (1953-59), Replaces: AB2700R, R21827R NOTE: Will not work w/ JDS186 hood patch since hole diameter is too small for muffler. Muffler Bracket Support Fits: 50, 520, Replaces: B3299R USA made NOTE: Bare metal. Bolts to radiator. JDS1111 JDS253 (Vertical round body) dimensions: Inlet length: 4-1/2", Inlet I.D.: 4 bolt base plate, Shell length: 14-1/2", Shell diameter: 3.625", Outlet length: 5", Outlet O.D.: 2-1/4", Overall length: 24-1/2", (If raincap is needed - order RCS006) $114.45 Muffler Support Elbow Fits: 530, Replaces: R20449R USA made NOTE: Bare metal. Bolts to radiator. JDS640 $89.95 JDS501 $45.75 Fits: 630, 730 Replaces: AR20450R NOTE: Wire feed weld. JDS640 (Vertical oval body) dimensions: Inlet length: 1", Inlet I.D.: 2.568" 4 bolt base plate, Shell length: 18", Shell diameter: 4-1/4" x 9", Outlet length: 2", Outlet O.D.: 3", Overall length: 21", (If raincap is needed - order RCS009) Fits: L w/ JD engine, LA, LI, (LU SN: 640000 & up), Replaces: AL2812T JDS838 $82.50 JDS501 & JDS838 dimensions: Inlet length: 1-3/4", Inlet O.D.: 1.505", Shell length: 12-3/4", Shell diameter: 4", Outlet length: 2-11/16", Outlet O.D.: 1-7/16", Overall length: 17-5/16", (If raincap is needed - order RCS003) Economy mufflers - USA made Order # Price JDS254 $30.85 Description / Application Fits: A series (except 1939), AR, 60, 70, 620, 720, Replaces: R21826 JDS252 $51.45 Fits: 330, 430, 435, 440 gas (1956-59) Replaces: AM3246T, AT10522 JDS254 (Vertical round body) dimensions: Inlet length: 4-1/2", Inlet I.D.: 4 bolt base plate, Shell length: 14-1/2", Shell diameter: 4-1/4", Outlet length: 2-1/2", Outlet O.D.: 2-5/8", Overall length: 21", (If raincap is needed - order RCS007) JDS255 $34.95 Fits: A series (SN: 488000 & up), AR (if taller muffler is desired), G series, 60, 70, 620, 720, Replaces: AA2214R, AF3770R NOTE: Has indentation for steering shaft. JDS252 (Vertical oval body) dimensions: Inlet length: 2-1/2", Inlet I.D.: 2", Shell length: 161/2", Shell diameter: 4-1/4" x 9", Outlet length: 3-1/2", Outlet O.D.: 2", Overall length: 22", (If raincap is needed - order RCS005) JDS251 $22.50 JDS255 (Vertical round body) dimensions: Inlet length: N/A, Inlet I.D.: 4 bolt base plate, Shell length: 23", Shell diameter: 3-3/4", Outlet length: 1", Outlet O.D.: 2-1/2", Overall length: 24-1/2", (If raincap is needed - order RCS007) JDS633 $44.95 Fits: Unstyled A, G, 60, 70, 620, 630, 720, 730, Replaces: AF3770R NOTE: No indentation. Affordable quality. 350 Exhaust Adapter (Use w/ JDS252 muffler) Replaces: AT10523 NOTE: Stamped 2 bolt mounting flange. High temperature paint. JDS251 dimensions: Inlet I.D.: 1-7/8", Outlet O.D.: 2", Overall length: 7-1/2" JDS699 JDS633 (Vertical round body) dimensions: Inlet length: N/A, Inlet I.D.: 4 bolt base plate, Shell length: 23-1/8", Shell diameter: 4", Outlet length: N/A, Outlet O.D.: 2-7/16", Overall length: 24-1/2", (If raincap is needed - order RCS007) Fits: L, LA, LI, LUC w/ JD engine SN: L640000 & up, Replaces: AL2812T $45.55 Fits: R, 80, Early 820 w/ 3-bolt mounting plate, Replaces: AR327R JDS699 (Vertical round body) dimensions: Inlet length: N/A, Inlet I.D.: 3 bolt base plate, Shell length: 23-1/8", Shell diameter: 3-3/4", Outlet length: N/A, Outlet O.D.: 2-7/16", Overall length: 24", (If raincap is needed - order RCS007) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS363 $64.95 Description / Application Fits: 530; Serviceable for 50, 520 Replaces: AR20449R Economy mufflers - USA made cont... Order # Price JDS870 $56.65 JDS363 (Vertical oval body) dimensions: Inlet length: 1-9/16", Inlet I.D.: 4 bolt base plate, Shell length: 19-1/8", Shell diameter: 4" x 9", Outlet length: 1-5/8", Outlet O.D.: 2-3/16", Overall length: 22-1/2" JDS263 $51.35 JDS2245 $81.45 Fits: 830, 830I, 840, Serviceable for 80, 820 2-cyl., Replaces: AR21805, AR20819 NOTE: Black finish. Must use 3 bolt adaptor R21650, not available from STP, Inc. JDS869 $19.00 2-Piece Muffler Clamp (For JDS870 & JDS1768 mufflers) Replaces: R32235, AR46323 USA made JDS1768 $57.65 $38.50 JDS1768 (Vertical oval body) dimensions: Inlet length: 4-1/2", Inlet I.D.: Flared, Shell length: 19-1/4", Outlet length: 4", Outlet O.D.: 2-1/4", Overall length: 27" (Inlet is flared - if clamp is needed order JDS869), (If raincap is needed order RCS006) Fits: 2010 up to SN: 29000 gas, diesel; Serviceable for 1010 diesel up to SN: 30999 Replaces: AT13310 NOTE: Black finish. $58.95 Fits: 300, 301, 302, 400, 401, 820 3-cyl., 830 3-cyl., 1020, 1520, 1530, 2020, 2030, 2040, 2130, 2240, 2630, (2640 SN: 341000 & up) gas, diesel, Replaces: AT21689, AT64102 JDS1459 (Vertical oval body) dimensions: Inlet length: 2", Inlet I.D.: 2-1/2", Shell length: 191/2", Shell diameter: 4-1/4" x 9", Outlet length: 7-3/4", Outlet O.D.: 2", Overall length: 30" (If raincap is needed - order RCS005) JDS2237 $48.50 Fits: 3010 up to SN: 1T6643 gas, LP, diesel; 3020, 500, 500A, 500B gas, LP; 4010 up to SN: 2T7026 gas, LP, diesel; 4000, 4020 gas, LP up to 1969, Replaces: AR26786 NOTE: All w/ straight not flared inlet. JDS2237 (Vertical round body) dimensions: Inlet length: 3", Inlet I.D.: 2-15/16", Shell length: 20", Shell diameter: 5-7/8", Outlet length: 3", Outlet O.D.: 2-5/8", Overall length: 26" (Inlet is straight - if clamp is needed order ABC585), (If raincap is needed - order RCS007) Engine parts JDS2241 (Vertical round body) dimensions: Inlet length: 2-3/4", Inlet I.D.: 2-3/16", Shell length: 20", Shell diameter: 4-1/4", Outlet length: 3-1/2", Outlet O.D.: 2-1/4", Overall length: 26" (Inlet is straight - if clamp is needed order ABC578), (If raincap is needed - order RCS006) JDS1459 Fits: 3020 diesel SN: 123000 and up, (4000, 4020 diesel SN: 201000 & up), 4030 diesel, 4230 diesel, 4040 diesel; Backhoes: 500A SN: 6645 & up, 500B, 500C, 510 Replaces: AR41171, AR86595 Economy muffler clamps USA made Order # Price ABC568 $2.95 Fits: L w/ JD engine, LA, LI, (LU SN: 640000 & up) (1-1/2" clamp) NOTE: Use w/ JDS501 Muffler. ABC570 $2.95 (1-5/8" clamp) ABC572 $2.95 (1-3/4" clamp) ABC574 $3.25 (1-7/8" clamp) ABC576 $3.25 (2" clamp) ABC578 $3.25 Fits: 320, 330, 420, 430, 440, 435, 1010 gas (2-1/4" clamp) ABC580 $3.25 (2-1/2" clamp) ABC583 $4.95 (2-3/4" clamp) ABC585 $4.95 (3" clamp) Application / Dimensions ABC2234 $4.95 (3-1/2" clamp) ABC1771 $7.95 (4" clamp) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com John Deere JDS2245 (Vertical oval body) dimensions: Inlet length: 2-1/2", Inlet I.D.: 3-3/8", Shell length: 14-1/4", Shell diameter: 9-5/8" x 5-11/16", Outlet length: 2-3/4", Outlet O.D.: 3-1/2", Overall length: 19" (If raincap is needed - order RCS016. If clamp is needed - order ABC2234) JDS2241 Fits: 3010 diesel SN: 6644 & up, 3020 diesel up to SN: 122999, 4010 diesel SN: 7027 & up, 4020 up to SN: 200999 Industrials: 500 series, 570 Grader, 600 Replaces: AR30189, AR30190 JDS870 (Vertical round body) dimensions: Inlet length: 3", Inlet I.D.: 2-15/16", Shell length: 20", Shell diameter: 6", Outlet length: 3", Outlet O.D.: 2-5/8", Overall length: 26" (Inlet is flared if clamp is needed order JDS869), (If raincap is needed - order RCS007) Fits: 620, 630, 720, 730 gas, diesel; Serviceable for 60, 70, 620, 720 Replaces: AR20450R JDS263 (Vertical oval body) dimensions: Inlet length: 3", Inlet I.D.: 4 bolt base plate, Shell length: 16-1/2", Shell diameter: 4-1/4" x 9", Outlet length: 2-1/2", Outlet O.D.: 2-5/8", Overall length: 21", (If raincap is needed - order RCS007) Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Economy mufflers - USA made cont... 351 Order # Price Exhaust pipes, parts, Mandrel bends cont... Fits the following pipe (O.D.) RCS002 $9.65 (1-1/4" - 1-7/16" I.D.) RCS003 $9.80 (1-1/2" - 1-11/16" I.D.) RCS004 $9.95 (1-3/4" - 1-15/16" I.D.) RCS005 $10.35 (2" - 2-3/16" I.D.) RCS006 $10.75 (2-1/4" - 2-7/16" I.D.) RCS007 $10.95 (2-1/2" - 2-11/16" I.D.) RCS015 $41.95 (3" I.D.) USA made NOTE: Chrome plated. RCS009 $13.35 (3" - 3-3/16" I.D.) RCS014 $34.80 (2-1/2" I.D.) USA made NOTE: Chrome plated. RCS016 $45.95 (3-1/2" I.D.) USA made NOTE: Chrome plated. RCS017 $52.95 (4" I.D.) USA made NOTE: Chrome plated JDS370 JDS767 JDS262 Order # Price JDS369 45o angle bolt pattern Engine parts JDS374 JDS365 Vertical bolt pattern JDS366 Vertical bolt pattern JDS372 45o angle bolt pattern Order # JDS374 Price $48.95 JDS373 45o angle bolt pattern JDS492 Horizontal bolt pattern JDS361 Horizontal bolt pattern JDS619 45o angle bolt pattern Description / Application Exhaust Pipe fits: Unstyled A SN: 410000 -476999, Replaces: AA299R NOTE: Has 4 bolt flange. JDS369 $39.95 Exhaust Pipe fits: Styled A SN: 488000 & up gas, Replaces: AA4014R NOTE: Exhaust flange bolt holes at angle. JDS492 $39.95 Exhaust Pipe fits: Styled A All fuel SN: 488000 - 583999, Replaces: AA2213R NOTE: Exhaust flange bolt holes horizontal. 352 JDS371 JDS259 JDS969 JDS260 JDS261 JDS251 JDS978 Description / Application JDS365 $39.95 Exhaust Pipe fits: Unstyled B SN: 1000 42199 (Short Frame), Replaces: AB322R NOTE: Exhaust flange bolt holes are vertical. JDS366 $48.95 Exhaust Pipe fits: Unstyled B SN: 42200 59999, Replaces: AB1256R NOTE: Exhaust flange bolt holes are vertical. JDS361 $38.95 Exhaust Pipe fits: Styled B SN: 60000 183971, Replaces: AB1526R NOTE: Exhaust flange bolt holes are horizontal. JDS372 $39.95 Exhaust Pipe fits: Styled B All fuel SN: 183972 -200999, Styled B gas SN: 60000 183971, Replaces: AB3427R NOTE: Exhaust flange bolt holes at angle. JDS373 $42.25 Exhaust Pipe fits: Styled B SN: 201000 & up Replaces: AB3536R NOTE: Exhaust flange bolt holes at angle. JDS619 $38.95 Exhaust Pipe fits: Styled G SN: 13000 & up Replaces: AF638R NOTE: Exhaust flange bolt holes at angle. JDS370 $32.50 Exhaust Pipe fits: H up to SN: 26999 Replaces: H1062R JDS371 $32.50 Exhaust Pipe fits: H SN: 27000 & up Replaces: H1059R JDS969 $38.65 Exhaust Pipe Clamp fits: H series SN: 1000 & up, Replaces: H1060R NOTE: Bare metal. JDS767 $9.95 Donut Flange Gasket (For Exhaust Pipe) Fits: H, Replaces: H1061R JDS259 $39.95 Exhaust Pipe fits: 50, 520, 530 gas, LP Replaces: AR4638R, AR20582R JDS260 $39.95 Exhaust Pipe fits: 60 gas, 60 All fuel SN: 6013900 & up, 60 LP SN: 602600 & up Replaces: AA5347R (2-1/2" O.D. pipe) NOTE: Not Standard, Low seat, Orchard. Exhaust pipes, parts, Mandrel bends John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Raincaps STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price NOTE: 16 gauge; double wall (lined) Description / Application JDS251 $22.50 Exhaust Adapter fits: 330, (420 SN: 135026 & up), 430, (440 gas SN: 442887 & up) Replaces: AT10523 JDS262 $39.95 Exhaust Pipe fits: 70, 720, 730 gas, All fuel, LP, Replaces: AR20516R JDS261 $39.95 Exhaust Pipe fits: 620, 630 gas, All-fuel, LP gas (Row Crop, Standard) Replaces: AA6742R, AR20584R JDS978 $39.95 Exhaust Pipe fits: 70, 720, 730 diesel Replaces: AF1972R, AR20517 Fits: B SN: 96001 & up (1941 & up) (3" O.D.; 18-3/4" tall) Description Order # Price Order # Price Stainless Steel Exhaust Stack (Straight).............. JDS402..........$125.95 w/ Indentation NOTE: Use RCS015 raincap. Fits: H (2-1/2" O.D., 24" tall) Exhaust stacks - USA made NOTE: 16 gauge; double wall (lined) Fits: Unstyled A, G, 60, 620, 630, 70, 720, 730 (4" O.D.; 24" tall) Description Order # Price Description Chrome Exhaust Stack (Straight).......................... JDS521..........$122.50 NOTE: ChromeUse IHS2296 raincap. Chrome Exhaust Stack w/ Bend............................ JDS578..........$124.95 Chrome Exhaust Stack (Straight).......................... JDS809..........$138.50 w/ Hardware w/out Indentation NOTE: Baffled like a muffler. Chrome Exhaust Stack (Straight).......................... JDS447..........$115.35 w/ Hardware w/out Indentation Chrome Exhaust Stack w/ Bend............................ JDS448..........$125.95 w/ Hardware w/out Indentation Description Description Order # Chrome Exhaust Stack (w/ Bend).......................... JDS459..........$108.50 Fits: R, 80, 820, 830 (4" O.D.; 24" tall) Price Chrome Exhaust Stack (Straight).......................... JDS453..........$115.35 w/ Indentation (For steering shaft clearance) Stainless Steel Exhaust Stack (Straight).............. JDS401..........$125.95 w/ Indentation (For steering shaft clearance) Chrome Exhaust Stack (w/ Bend).......................... JDS454..........$135.95 w/ Indentation (For steering shaft clearance) NOTE Use RCS016 raincap on straight exhaust stacks. Description Price Chrome Exhaust Stack (w/ Bend).......................... JDS450..........$125.95 Fits: 50, 520, 530 (3" O.D.; 24" tall; 4 bolt base) Description Order # Order # Chrome Exhaust Stack (Straight).......................... JDS449..........$115.35 Fits: Unstyled B up to SN: 60000 (3" O.D.; 24" tall) Description Price Chrome Exhaust Stack (Straight).......................... JDS458..........$98.50 NOTE: Use RCS015 raincap. Price Chrome Exhaust Stack (Straight).......................... JDS443..........$135.95 w/out Indentation (3 bolt 90° base) NOTE: Use RCS015 raincap. Order # Price Chrome Exhaust Stack (Straight).......................... JDS445..........$115.35 NOTE: Use RCS015 raincap. Chrome Exhaust Stack (w/ Bend).......................... JDS446..........$125.95 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Exhaust stacks continue on next page 353 Engine parts Fits: Styled A SN: 488000 & up (1940 & up) (3-1/2" O.D.; 21" tall) Order # John Deere Fits: M, 40, 320, 420 series (3" O.D.; 18" tall (chrome), 22" o/a tall) All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Exhaust stacks - USA made cont... Exhaust pipes, parts, Mandrel bends cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Engine parts Exhaust stacks - USA made cont... NOTE: 16 gauge; double wall (lined) Order # Fits: 3010 diesel SN: 6644 & up, 3020 diesel, 4000 diesel, 4010 diesel SN: 7027 & up, 4020 diesel, 4030 diesel, 4040, 4230 diesel, 4240 diesel (5" O.D.; 36" tall; 2-15/16" inlet I.D.) Description Order # Crankcase breathers, parts cont... JDS2413 Price $8.85 Price Chrome Exhaust Stack (w/ Bend).......................... JDS456..........$181.25 NOTE: If clamp is needed order JDS869. Order # Fits: A, B, D, G, GP series Replaces: AB1898R USA made Description Price Chrome Exhaust Stack (w/ Bend).......................... JDS635..........$189.00 Crankcase Breather Filter Cover Felt Gasket Fits: B series all w/ electric start SN: 60000 to 200999; H series as an outer breather cover gasket, Replaces: H505R (4.080" O.D., 2.780" I.D., 0.110" thick, 0.725" wide) USA made Compression relief petcock Fits the following diesels: 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4620, 4630, 4640, 4755, 4650, 4840, 4555, 4755, 4955, 7020 (5" O.D.; 36" tall (chrome), 38" o/a tall; 3-15/16" base I.D., 4" base O.D.) Description Description / Application Order # Price Compression Relief Petcock.................................. JDS508..........$46.30 NOTE: Brass. New & improved design utilizes Teflon® lining for superior sealing. Crankcase breathers, parts Order # Price JDS911 $59.90 Choke parts Description / Application Crankcase Ventilator Pipe Fits: Unstyled B series up to SN: 42199 w/ short frame, Replaces: B59R (27-1/4" long, 1/2" O.D.) USA made Close out Order # JDS718 JDS943 $28.20 JDS2402 $9.85 Crankcase Breather Stack Gasket (Outer) Fits: Same as JDS943 Replaces: D1957R (5.000" O.D., 3.725" I.D., 0.185" thick, 0.640" wide) USA made JDS2406 $6.50 Crankcase Breather Filter Core Gasket (Inner) fits: Same as JDS943 Replaces: D1951R (4.550" O.D., 3.650" I.D., 0.100" thick, 0.480" wide) USA made JDS946 Crankcase Breather Filter Core Fits: A series to SN: 583999; G series; D SN: 109944 & up; GP SN: 223803 & up Replaces: D1952R Price Choke Cable Fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 440, 1010, 2010, Replaces: AM1799T, AT12896, AT13452, AT21782 (47" long) NOTE: Metal sheathed. Has word "CHOKE" on knob. ABC423 $9.95 Universal Choke Cable Fits: Tractors, Forklifts, other applications using 72" or less cable NOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines. ABC2426 $7.50 $28.20 Crankcase Breather Filter Core Fits: B series up to SN: 209999, H series Replaces: AB233R JDS832 JDS2409 354 $7.95 Crankcase Breather Filter Cover Felt Gasket Fits: B series up to SN: 200999, BO, BR (All w/ hand start only); Fits H series as an inner breather filter gasket Replaces: B54R (3.500" O.D., 2.750" I.D., 0.120" thick, 0.375" wide) USA made Description / Application $18.75 $9.95 Choke or Fuel Shut Off Cable Clip (For Marvel Schebler choke cable bracket) Fits: L, LA, M, MT, 40, 320, 330, 420, 430, 440, 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, (3010, 3020, 4000, 4010, 4020 also works on Zenith & LP), Replaces: R10188 NOTE: See website for a complete listing of applications & carburetor numbers. Choke Knob Fits: A, AO, AR, B, BO, BR, D, G, H, 50, 60, 70, 520, 530, 620, 630, 720, 730 Replaces: B1951R (1/4"-20 NC) NOTE: Metal. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetors, parts cont... Can't find your carburetor number? Look on page 321. Order # Price Description / Application NOTE: Carburetors are limited to replacement only - NO JDS905 $12.50 Carburetor Bowl Nut (Brass) (For Marvel Schebler carburetors) Fits: A, B, D, (G w/ DLTX 24), GP The following with All-fuel: 50 up to SN: 5015950, 60 up to SN: 6013899; Also fits Stationary engine W (All w/ DLTX 10, 15, 16, 18, 19, 24, 33, 34, 41, 53, 63, 67, 71, 72, 73), Replaces: R10063, S2424 (7/8") USA made NOTE: Bowl gasket not included. Gasket mounts on outside of bowl. JDS2682 $14.50 refunds. No replacement will be given if dirt, rust, etc. is found in the carburetor or if it has been taken apart. Order # ABC223 ABC513 JDS907 Price $358.90 $2.50 $38.95 JDS821 $59.97 JDS901 $14.95 Throttle Body Repair Bushing (For Small bowl Marvel Schebler carburetors) fits: L series, 1010 (.383" O.D., .247" I.D., .501" long) USA made NOTE: Repairs worn throttle body using 1/4" throttle shafts. Must ream to size. Single Induction Early Carburetor Hardware Kit (For Marvel Schebler carburetors) fits: A series w/ DLTX 7, 18, 19, 24, 33, 39, 53; B series w/ DLTX 3, 10, 34; D & DI w/ DLTX 3, 6, 16, 63; G series w/ DLTX 5, 6, 8, 11, 13, 16, 24, 31, 38, 51; GP w/ DLTX 5, 15, 17 USA made NOTE: Helps complete your carb rebuild. Jets and nozzles not included. Carburetor Bowl Nut (Brass) Fits: G w/ DLTX51 Replaces: R10155 JDS958 $4.25 Carburetor Bowl Nut Spring Fits: Same as JDS905 Replaces: R10078R USA made JDS903 $7.85 Connector (Fuel Line to Carburetor) Fits: A, B, D, G, GP, H, R, 50, 60, 70, 70D, 80, 520, 530, 620, 630, 720, 720D, 730, 730D, 840, W Stationary engine Replaces: A258R, D392R (1/8" pipe to 1/2" inverted flare, fits 5/16" tube) USA made NOTE: Brass. JDS2579 $28.50 Carburetor Fuel Strainer Assembly w/ Gasket fits: A, B, D, G series & (Early 50 & 60 All fuel) w/ DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors Replaces: AR10021 (1.640" O.D. cover, steel cover, correct brass bolt w/ 0.375" tall hex head) NOTE: Steel cover can replace original brass cover on early tractors. JDS1058 $20.75 ABC297 $7.50 Single Induction Late Carburetor Hardware Kit (For Marvel Schebler carburetors) fits: Late A, B series; The following w/ All-fuel: 50 up to SN: 5015950, 60 up to SN: 6013899 w/ DLTX 67, 71, 72, 73 USA made NOTE: Helps complete your carb rebuild. Jets and nozzles not included Carburetor Bowl (For dual induction Marvel Schebler carburetors) Fits: 50, 60, 70, 520, 530, 620, 630, 720, 730 w/ DLTX 75, 81, 82, 83, 84, 85, 86, 94, 95, 96, 97, 98, 99, 101, 102, 105, 106 Replaces: A5173R, AR10074R, 65-703 Carburetor Bowl Nut (Brass) (For dual induction Marvel Schebler carburetors) Fits: 50 (including All-fuel SN: 5015951 & up), 60 (including All-fuel SN: 6013900 & up), 70 (gas, All-fuel), 520, 530, 620, 630, 720, 730, Replaces: R10156R, 81-166 USA made NOTE: Bowl gasket not included. Gasket mounts on outside of bowl. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Carburetor Elbow & Strainer Assy (For Marvel Schebler carburetors) Fits: L series, M series, 40, 320, 330, 420, 430, 440, 1010 (All w/ TSX 245, 475, 530, 562, 641, 678, 688, 689, 777, 809, 812, 860) Replaces: AM815T, Marvel Schebler 67-523 (1/8" pipe x 1/4" tube) USA made Carburetor Fuel Inlet Elbow & Strainer Assy. fits: John Deere models (Male end (Screen end) - 1/8" pipe thread; female end - 1/4" flare) NOTE: Must have internal threads. Used w/ flair fitting; not compression fitting. Carburetors, parts continue on next page 355 Engine parts $38.95 Carburetor New, Zenith Replacement (For Marvel Schebler carburetors) Fits: L SN: L640000 & up, LA, LI Combines: 12A, 25, 30 Power Unit: LUC USA made NOTE: Does not fit Hercules engines. Has 1-1/8" throttle bore. May have to trim throttle shaft on some applications. Will fit 2-5/16" - 2-3/8" c.c. stud holes because of the smaller dia. studs that are included. John Deere JDS909 Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Carburetors, parts Carburetors, parts cont... Can't find your carburetor number? Look on page 321. Order # Price Description / Application NOTE: Carburetors are limited to replacement only - NO JDS912 $49.95 Adjustable Load Nozzle Assy. (For Zenith carburetors) fits: 3010, 3020, 4000, 4010, 4020 (All w/ 69 series Zenith: 12506, 12510, 12879, 13320, 13429, 13430 & END mounted solenoid or load nozzle) Replaces: AR46109, H21058 R13068, R13069, R13070 (1/2"-20 thread, 1.965" o/a length) NOTE: Used to eliminate the electric solenoid. JDS914 $49.95 Adjustable Load Nozzle Assy. (For Zenith carburetors) fits: 500, 3010, 3020, 4000, 4010, 4020 (All w/ 69 series Zenith: 12506, 12510, 12879, 13320, 13429, 13430, 13924 & SIDE mounted solenoid or load nozzle) (1/2"-20 thread, 2.417" o/a length) NOTE: Used to eliminate the electric solenoid. JDS1135 $4.95 Choke Disc (Brass) (For Marvel Schebler carburetors) fits: A, AO, AR w/ DLTX 71, 72; 60 All-fuel w/ single induction DLTX 72 carburetor, Replaces: R10110, 27-208 (1.876" O.D., .032" thick) USA made JDS1138 $4.95 Choke Disc (Brass) (For Marvel Schebler carburetors) fits: B SN: 201000 & up w/ DLTX 67; 50 All-fuel w/ single induction DLTX 73 carburetor, Replaces: R10108, 27-181 (1.680" O.D., .036" thick) USA made ABC1182 $18.50 Choke Disc (Brass) (For Marvel Schebler carburetors) fits: L, LA, LI, LUC w/ TSX 13, 45, 60, 85, 89, 90, 91, 237, 356, 516, TSXU828, U829, U830, U831, U832, U833 Replaces: 27-530, 27-539 (1-5/16" O.D.) USA made JDS1127 $4.95 Choke Disc (Brass) (For Marvel Schebler carburetors) fits the following w/ dual induction carburetors: 50, 60, 70, 520, 530, 620, 630, 720, 730 (All w/ DLTX 75, 81, 82, 83, 84, 85, 86, 94, 95, 96, 97, 98, 99, 101, 102, 105, 106), Replaces: R10112, 27-233 (1.880" O.D., .049" thick) USA made JDS984 $26.75 JDS1149 $4.95 JDS1145 $4.95 refunds. No replacement will be given if dirt, rust, etc. is found in the carburetor or if it has been taken apart. Order # JDS1069 Price $9.95 Engine parts Description / Application Needle Float Valve (For single Induction Marvel Schebler carburetors) Fits: A series w/ DLTX 7, 18, 19, 24, 33, 39, 53, 71, 72; B series w/ DLTX 10, 34, 67, 73; D series w/ DLTX 6, 12, 16, 63; G series w/ DLTX 5, 6, 8, 11, 13, 16, 24, 31, 38, 51; GP w/ DLTX 5, 15, 17; 50 All-fuel w/ DLTX 73; 60 All-fuel w/ DLTX 72, W Stationary engine, Replaces: 233-574, AR10077R, AR10113R, C2501R, X2653 USA made NOTE: Viton needle. ABC230 $6.45 VITON Needle Float Valve (For Marvel Schebler carburetors) Fits: L, LA, LI, (1010 series up to SN: 31000), Replaces: Marvel Schebler: 233-536 (.080 orifice) USA made NOTE: Viton needle & seat helps stop carb flooding. ABC133 $6.15 VITON Needle Float Valve (For Marvel Schebler carburetors) Fits: M series w/ TSX 245, 475; 40 w/ TSX 530; 50 w/ DLTX 75, 86; 60 w/ DLTX 81, 84; 70 w/ DLTX 82, 85; 320 & 330 w/ TSX245, 475; 420 & 430 w/ TSX 688; 440 w/ TSX 756, 777; 520 & 530 w/ DLTX 96, 99; 620 & 630 w/ DLTX 94, 97; 720 & 730 w/ DLTX 95, 98; 2010 w/ TSX 808, 810 Replaces: 233-543, 233-595 (0.100" orifice) USA made NOTE: VITON needle & seat helps stop carburetor flooding. John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Carburetors, parts cont... JDS1056 $37.95 Main Nozzle (For Marvel Schebler carburetors) fits: M series, 40 w/ TSX 245, 475, 530, 562, Replaces: 47-288, 47-391 USA made ABC559 $37.95 Main Nozzle (For Marvel Schebler carburetors) fits: 420, 430, 440 (All w/ TSX 641, 688, 756) Replaces: 47-451 USA made ABC562 JDS1067 356 $26.40 $69.75 Main Load Adjusting Needle Assy. w/ 'T' Style Handle (For Marvel Schebler carburetors) fits: M series, 40, 420, 430, 440 (1958-64) (All w/ TSX 245, 530, 641, 688, 689, 756, 768, 777), Replaces: 43-134, 43613, 43-713, C71-74 Main Load Adjusting Needle Assy. w/ Original 'L' Style Handle (For Marvel Schebler carburetors) Fits: M w/ TSX 245; 40 w/ TSX 530; 420, 430 w/ TSX 641, 688, 689; 440 w/ TSX 756, 768, 777, Replaces: 43-622, 43-678, 43-699 (3/8"-24 thread) USA made Choke Shaft (For Marvel Schebler carburetors) fits: A series w/ DLTX 53, B series w/ DLTX 34, G series w/ DLTX 51 Replaces: AR10043 (.245" dia., 2.925" long) Throttle Disc (Brass) fits: A, AO, AR (All w/ DLTX 18, 19, 24, 33, 41, 53); D w/ DLTX 63; G w/ DLTX 51; GP w/ DLTX 15, 17; W Stationary engine w/DLTX 12 Replaces: P948, R10024,14-240 (1.686" O.D., .051" thick) USA made Throttle Disc (Brass) Fits: B up to SN: 95999 w/ DLTX 10 Replaces: P1124, R10028, 14-238 (1.308" O.D., .051" thick) USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetor gaskets - USA made Order # NOTE: Check measurements before ordering. JDS1143 JDS1140 ABC1159 JDS1132 ABC1354 $4.95 $5.00 $4.95 $19.95 $29.95 $32.50 Throttle Disc (Brass) Fits: B SN: 96000 & up; 50 All-fuel w/ single induction DLTX 34, 67, 73 carburetor, Replaces: R10080, 14-183 (1.369" O.D., .049" thick) USA made Throttle Disc (Brass) Fits: H w/ DLTX 26, 46 Replaces: P1205, R10029 (1.243" O.D., .050" thick) USA made Throttle Disc (Steel) Fits: L, LA, LI, LUC w/ TSX 13, 45, 60, 85, 89, 90, 91, 237, 356 Replaces: 14-175 (1.105" O.D.) USA made Throttle Disc (Brass) fits the following w/ dual induction carburetors: 60, 70, 620, 630, 720, 730 (All w/ DLTX 81, 82, 84, 85, 94, 95, 97, 98, 101, 102, 106); 2 used per tractor; Sold individually Also fits the following w/ Marvel Schebler carburetors: 3010, 3020, 4000, 4010, 4020 (All w/ USX 20, 21, 30, 35, 36, 45SL, 48SL, 49SL, 211); Also fits the following w/ LP carburetors: 3020, 4000, 4020 (All w/ carb AR44050, AR44053, AR46261) Replaces: R10083, 14-244 (1.755" O.D., .063" thick) USA made Throttle Shaft (For Marvel Schebler carburetors) fits: A series w/ DLTX 71; B series w/ DLTX 67; 50 All-fuel w/ DLTX 73; 60 All-fuel w/ DLTX 72 Replaces: AR10058 Throttle Shaft (For dual induction Marvel Schebler carburetors) fits: 60, 70, 620, 630, 720, 730 w/ DLTX 81, 82, 84, 85, 94, 95, 97, 98, 101, 102, 106, Replaces: AR10060 Throttle Shaft (For Zenith carburetors) Fits: 3010, 3020, 4000, 4010, 4020; Industrials: 500, 600 w/ carb 12506, 12510, 12879, 13320, 13429, 13430, 13450 Replaces: AR13017, AR13020 JDS1065 $26.75 Fuel Shut Off Valve for Pony motor (At carburetor) fits: 70, 80, 720, 820 (All w/ Pony start diesel), Replaces: AF2153R, AR1128R (1/8" pipe thread) USA made ABC1167 $13.25 Venturi (For Marvel Schebler carburetors) Fits: L, LA, LI, LUC w/ TSX 516, Power Units w/ TSXU829, TSXU832 Replaces: 46-467 (11/16" dia.) NOTE: Plastic. Order # JDS982 Price Description / Application $6.85 Carburetor Gasket Kit Fits: A, B, D, G series ABC410 $1.39 ABC543 $1.95 ABC408 $1.39 JDS986 $6.85 Manifold to Carburetor Gasket Fits: A, B, D, G, H series (2-15/16" c.c., 1-3/4" center hole) Manifold to Carburetor Gasket Fits: Unstyled 'L' up to SN: 624999 Replaces: L349T (1-13/16" c.c. bolt holes, 15/16" center hole) Manifold to Carburetor Gasket Fits: Styled L, LA Replaces: L681T (2-3/8" - 2-7/16" slotted bolt holes, 1-1/8" center hole) Carburetor Gasket Kit Fits the following w/ dual induction Marvel Schebler carburetors: 50, 60, 70, 520, 530, 620, 630, 720, 730 JDS915 $6.50 ABC2275 $3.95 ABC416 $1.50 ABC424 $1.39 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Carburetor End Gasket Kit Fits the following w/ dual induction Marvel Schebler carburetors: 50, 60, 70, 520, 530, 620, 630, 720, 730 Replaces: A4631R, A4634R, R100312 Carburetor Gasket Kit (For Big Bowl Marvel Scheblers) fits: Some M, 40, 320, 330, 420, 430, 440, 1020, 1520, 2010, 2020, 2510, 2520 Replaces: 16-654 NOTE: Fits same carb numbers as FDS212 economy kit on page 358. Manifold to Carburetor Gasket Fits: M, MI, MT, 40, 420, (430 up to SN: 139999), 1010 (2-3/8" c.c. bolt holes, 1-5/16" center hole) Manifold to Carburetor Gasket Fits: 300 Industrial, (430 SN: 140000 & up), 440, 1020, 1520, 2010 (2-11/16" c.c. bolt holes, 1-1/2" center hole) NOTE: Import. Perforated steel core. Check measurements before ordering. 357 Engine parts JDS1356 $4.95 Description / Application John Deere JDS988 Price All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Carburetors, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Carburetor floats Order # Price Application JDS592 $23.60 Carburetor Float (For Marvel Schebler carburetors) fits: Early A, B, D, G, Late GP (All w/ DLTX 7, 8, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 107U, 108U, Replaces: AR10066R, 30-635 (2.700" O.D, 1.729" I.D, .931" tall) JDS595 $32.50 Carburetor Float (For Marvel Schebler carburetors) fits: Late A, AO, AR, B series (All w/ DLTX 67, 71, 72, 73) Replaces: AR10068R, 30-700 (2.700" O.D., 1.729" I.D., .925" thick) JDS598 $34.95 ABC036 $11.95 $19.95 John Deere ABC037 Engine parts Carburetor floats cont... JDS600 ABC452 $32.50 Carburetor Float (For Marvel Schebler carburetors) fits: H w/ DLTX 26, 46 Replaces: AH523R, 30-636 (2.715" O.D., 1.665" I.D., .775" thick) Order # Price ABC361 $29.50 ABC454 $35.75 Carburetor repair kits Can't find your carburetor number? Look on page 321. Economy carburetor repair kits contain needle & seat, float lever pin, seal, gaskets & instructions. Carburetor Float (For small bowl Marvel Schebler carburetors) fits: L, LA, LI, 1010 (All w/ TSX 13, 45, 60, 85, 89, 90, 91, 809, 860); Power Units w/ TSX 237, 356, 450, 516, 532, 753, 802, 812 & TSXU 828, 829, 830, 831, 832, 833, Replaces: AT12743T, 30-600 Carburetor Float (For Marvel Schebler carburetors) fits: M, MC, MI, MT, 40, 300 Industrial, 320, 330, 400 Industrial, 401 Industrial, 420, 430, 440, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4000 (All w/ TSX 245, 475, 530, 562, 641, 678, 688, 689, 756, 808, 810, 881, 892, 899, 904, 904SL, 905, 905SL, 908, 944SL, 945SL, TSXU963); Power Units w/ TSX 615, 704, 711, 737, 768, 777, 788, 806, 819, 877, 883, 885, 886, 888, 894, 895, 898, 906, 906SL, 907, 907SL, 908SL, 920, 920SL, 921, 921SL, 922, 922SL, 923, 923SL, 938, 938SL, 941, 941SL, 952, TSXU 835, 836, Replaces: AT21411, 30-631, 30-739 Carburetor Float (For Marvel Schebler carburetors) fits: 50, 60, 70, 520, 530, 620, 630, 720, 730 (All w/ DLTX 75, 81, 82, 83, 84, 85, 86, 94, 95, 96, 97, 98, 99, 101, 102, 105, 106, 109U), Replaces: AR10069R, 30-713 Basic carburetor repair kits contain throttle shaft, needle & seat, float lever pin, seal, gaskets & instructions. Premium carburetor repair kits contain throttle plate, throttle shaft, bowl nut spring, throttle shaft bushings & packing, brass plugs, float pin, butterfly screws, stainless needle & seat, drain petcock, gaskets, fuel strainer & more. Order # Price 358 (For Zenith 63-11, 63-12 & 69 series carburetors) fits: 3010, 3020, 4000, 4010, 4020; Industrials: 500, 600 (All w/ carb 12506, 12510, 12879, 13209, 13320, 13429, 13430,13450, 13750, 15108) Replaces: AH10620, C85-40 Description / Application Economy Carburetor Repair Kits - USA made ABC224 $26.95 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: A w/ DLTX 7, 12, 18, 19, 24, 33, 38, 39, 41, 51, 53, 71, 72, 108U; B w/ DLTX 10, 34, 67, 73; D w/ DLTX 16, 63; G w/ DLTX 8, 11, 13, 16, 24, 31, 38, 51, 63; GP w/ DLTX 15, 17 NOTE: Includes idle adjustment screw. ABC220 $22.50 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: L w/ TSX 13, 45, 89, 91, 237, 356; LA w/ TSX 60, 85, 90; LUC w/ TSX 830; 1010 w/ TSX 809, 812, 860; Power Units w/ TSX 450, 516, 532, 753, 802 FDS212 $21.95 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: M, 320 w/ TSX 245, 475, 530; 40, 330 w/ TSX 530, 562; 420, 430 w/ TSX 641, 678, 688, 689; 440 w/ TSX 777; 1020 w/ TSX 904, 904SL, 963; 1520 w/ TSX 944SL; 2010 w/ TSX 808, 810, 899; 2020 w/ TSX 905, 905-1, 963-1; 2510, 2520 w/ TSX 905, 905-1, 949SL; Power Units w/ TSX 615, 704, 711, 737, 756, 759, 768, 777, 788, 806, 808, 819, 877, 907, 945SL, 952SL JDS1345 $25.75 Economy Carburetor Repair Kit (For dual induction Marvel Schebler carburetors) Fits: 50, 60, 70, 520, 530, 620, 630, 720, 730 w/ DLTX 75, 81, 82, 83, 84, 85, 86, 94, 95, 96, 97, 98, 99, 101, 102, 105, 106, 109 $23.60 $22.80 Carburetor Float (For Marvel Schebler carburetors) fits: 4030 w/ carb 969SL; Power Units w/TSX 485, 491, 759, 805, 817, 823, 874 & TSXU837, 838, 839, 840 Replaces: AH11983, 30-621 Carburetor Float (For Zenith carburetors) Fits: Power Units w/ carb S1238A, S1238B, 9849, Replaces: C85-26 Carburetor Float (For Zenith carburetors) Fits: 420, 430, 440 w/ carb 14996; 2030 w/ 14497, Replaces: C85-115 ABC1355 Application STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price Application Carburetor repair kits cont... Order # Economy Carburetor Repair Kits - USA made cont... ABC1306 ABC552 $34.95 Economy Carburetor Repair Kit (For Zenith carburetors) Fits: 3010, 3020, 4000, 4010, 4020, 105 Combine, Replaces: AR28635, AR34241, AR52449 & John Deere carb AR26432R, AR34243, AR45161, AR45162, AR52450, AR55368 & Zenith 12510, 12879, 13209, 13320, 13429, 13430, 13450, 13633A, 13750 Price Application Basic Carburetor Repair Kits cont... ABC485 $47.50 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 1010 w/ TSX 809, 860 ABC487 $45.50 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 2010 w/ TSX 810 $21.95 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 4030 w/ TSX 969SL $39.95 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 3010, 3020 w/ USX 21, 31, 36, 49SL; Also fits JD carb AR26432R, AR32639R, AR39702R, AR45161R, AR34242R, AR28636R JDS704 JDS670 $31.95 $34.50 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: Early A w/ DLTX 7, 16, 18, 19, 24, 33, 39, 53; Early B w/ DLTX 10, 16, 34, 107U; G w/ DLTX 8, 11, 13, 16, 24, 31, 38, 51, 63 JDS1992 $41.50 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 4010, 4020 w/ USX 20, 30, 35, 48SL; Also fits JD carb AR30280R, AR32636R, AR52450R, AR34244R, AR10110R, AR45160R JDS2684 $98.50 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: Late A w/ DLTX 71, 72, 108U; Late B w/ DLTX 67, 73 $27.95 Premium Carburetor Repair Kits Premium Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: A series w/ DLTX24, DLTX53 JDS2674 $33.95 $98.50 Premium Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: Late A series w/ DLTX71, DLTX72 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: M, MC, MT, 40, 320 (All w/ TSX 245, 475, 530) JDS2677 ABC148 $31.95 ABC394 $38.50 ABC396 $36.50 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 40, 420, 430 (All w/ TSX 641, 678, 688, 689) $98.50 Premium Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: Styled B series w/ DLTX34 JDS2680 $98.50 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 50, 520, 530 (All w/ DLTX 75, 83, 86, 96, 99, 105) USA made Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 60 w/ DLTX 81, 82, 84; 70 w/ DLTX 82, 85; 620, 630 both w/ DLTX 94, 97, 102, 106; 720, 730 both w/ DLTX 95, 98, 101 Engine parts Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: H w/ DLTX 26, 46 ABC483 John Deere JDS1988 Basic Carburetor Repair Kits JDS708 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Carburetor repair kits cont... Premium Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: Styled B series w/ DLTX67, DLTX73 JDS2690 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $98.50 Premium Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: G series w/ DLTX51 359 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Governor parts Order # Price JDS1277 $49.95 JDS2853 $32.50 Description / Application Governor Bearing & Race Fits: H, R, 80, 820, 830, 840 (All 2-cylinders), Replaces: JD7150, JD7151R, JD7152R, JD7153R NOTE: Steel like original, not plastic like sold by the OEM! Governor race only USA made is New & improved design! NEW! Bearing Assembly (For fan shaft, governor shaft & ventilator pump) Fits: A, B, (D SN: 109944 & up), G series, 50, 60, 70, (520 up to SN: 5210500), (620 up to SN: 6217722), (720 up to SN: 7221079) gas, LP, diesel Replaces: JD7654, JD7655, JD7656, JD7657 (2.080" O.D., 0.750" I.D.) NOTE: 4 to 6 used per tractor. Order # Price JDS331GK $16.95 JDS330 $298.50 Order # JDS544 Price JDS330GK $16.95 JDS3136 $385.30 JDS3130 $16.95 JDS3132 $425.00 Description / Application $475.95 Complete Radiator (For Unpressurized System) Fits: M, 40, 320 series Replaces: AM1771T (7 fins per inch & 3 rows of tubes; Core size: 14.375" wide x 17" high) Description / Application Gasket Pair only (For JDS331) USA made Radiator Core w/ Gaskets Fits: Styled B SN: 60000 & up, 50, 520, 530 Replaces: AB1608R, AB3599R, AB4666R (16" wide; 17-3/4" top to bottom) NOTE: 4 rows of tubes. Radiator, parts John Deere Engine/Cooling parts Radiator, parts cont... Gasket Pair only (For JDS330) USA made NEW! Radiator Core w/ Gaskets Fits: G SN: 607000 & up w/ water pump, 70, 720, 730 gas, LP Replaces: AF1321R (21-1/2" tall, 19" wide, 2-1/8" thick) NEW! Radiator Core Gaskets (pair) Fits: G SN: 13000 & up, 70, 80, 720, 730, 820 2-cyl., 830 2-cyl., 840 2-cyl. Replaces: F661R NEW! Complete Radiator Fits: 3020 gas, LP, diesel Replaces: AR46016 (Overall dimensions: 29-1/2" x 19-1/2", Core dimensions: 22-7/16" x 18" x 2", Inlet: 2", Outlet: 2") JDS514 $9.65 Radiator Mounting Pad w/ (4) Rivets Fits: M, 40, 320, 330, 420, 430, 435, 440 series, Crawlers: 350, 450 Replaces: 16H173, AM640T, AM1526T NOTE: Rubber is bonded to metal. 4 used per tractor; Sold individually. JDS1008 $20.75 Lower Radiator Bracket Fits: M, 40, 320, 330, 420, 430 series Replaces: AM298T USA made NOTE: 2 used per tractor; Sold individually. Does not include JDS514 mounting pad. JDS2941 $12.00 ABC209 $2.95 Radiator Drain Plug Fits: M thru 8850, Replaces: AM292T (1/4"-18 NPT) USA made NOTE: See website for full applications. NEW! Coolant Drain Plug Fits: A, B, G, H series, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830 2-cyl. Replaces: A2093R (3/4" NPT, 1-1/4" o/a length, 1-1/16" hex head) USA made NOTE: Original style. JDS2944 $12.50 JDS331 $349.35 NEW! Coolant Drain Plug Fits: D, GP, R, W111, 80, 8020 Replaces: C1865R (3/4" NPT, 2" o/a length, 1-1/16" hex head) USA made NOTE: Original style. Radiator Core w/ Gasket Fits: A SN: 488000 & up, AR SN: 260000 & up, 60, 620, 630 Replaces: AA2235R, AA5582R (18-3/8" wide; 21-1/4" top to bottom) NOTE: 4 rows of tubes. JDS774 $69.95 360 Radiator Fan Shroud Fits: A SN: 488000 & up; 60, 620, 630 (Rowcrop, Standard, Orchard) Replaces: AA2235R, AA5817R STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS3126 ABC455 Price $545.00 $2.95 Radiator caps w/ gasket, parts Description / Application NEW! Complete Radiator Fits: 4000, 4020 gas, diesel (no LP) Replaces: AR49454 (Overall dimensions: 31-1/4" x 20-5/8", Core dimensions: 24-3/8" x 19-1/2" x 2-5/8", Inlet: 2", Outlet: 2") NOTE: For 4020 up to SN: 090999 you will also need R39516 right upper tie down rod, NOT available from STP. Radiator Mounting Pad Fits: New Generation tractors (2" x 2", 1/4" thick) NOTE: 2 used per tractor; Sold individually. Price Description / Application JDS596 Order # $96.45 Radiator Cap w/ JDS596GKR Gasket & JDS1368 Baffle Fits Unstyled models: A, AO, AR, B, BO, BR, D, (G SN: 4251 - 12999), GP Replaces: AD86R, AA795R USA made JDS596GKR $9.95 Gasket only (For JDS596) Replaces: D473R USA made NOTE: Black rubber. JDS1368 $12.80 Oval Filler Cap Baffle Fits Unstyled models: A, AO, AR, B, BO, BR, D, (G SN: 4251 - 12999), GP Replaces: D126R USA made JDS193 $19.85 Radiator Cap w/ Gasket (For Unpressurized System) Fits: AO, AR, Styled A, B & D, (G SN: 13000 - 20202), R, (60 Orchard & Standard up to SN: 6042999) Replaces: AB1621R (4-5/16" I.D., 1/2" height) Radiator bolt kits Order # Price JDS1051 $34.95 JDS1055 $34.95 JDS964 JDS1057 JDS1059 $34.95 $34.95 $29.95 Radiator Bolt Kit Fits: Unstyled A series SN: up to 476999, (AO & AR SN: up to 271999) NOTE: Includes the correct length of hardware when adding shutters. Radiator Bolt Kit Fits: Styled A series SN: 477000 & up, (AO, AR SN: 272000 & up) NOTE: Includes the correct length of hardware when adding shutters. Radiator Bolt Kit Fits: Unstyled B series SN: up to SN: 59999, (BO & BR all) NOTE: Includes the correct length of hardware when adding shutters. Radiator Bolt Kit Fits: B SN: 60000 - 305999 (w/out water pump); Will also fit B SN: 306600 & up, but will have extra pieces Radiator Bolt Kit Fits: 50, 60 NOTE: Depending on model may have unused hardware. JDS944 $6.75 Gasket only (For JDS193) Replaces: B1669R USA made ABC125 $9.95 Underside view IHS1993 $12.50 Underside view JDS238 Radiator Bolt Kit Fits: 520, 530, 620, 630 NOTE: Depending on model may have unused hardware. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Radiator Cap w/ Gasket (For (7 PSI) pressurized system) Serviceable for A SN: 523600 - 542699, (AO, AR both SN: 262700 - 264299), B SN: 148500 - 166999, G SN: 20203 & up Replaces: AA3489R, AN110020 NOTE: Economy style cap, not like original. $19.95 Underside view JDS504 Radiator Cap w/ Gasket (For (4 PSI) Pressurized System) Serviceable for A SN: 523600 - 542699, (AO, AR both SN: 262700 - 264299), B SN: 148500 - 166999, G SN: 20203 & up Replaces: AA3489R, AN110020 NOTE: Economy style cap, not like original. Cooling parts $34.95 Underside view John Deere JDS1053 Description / Application $19.95 Underside view All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Radiator, parts cont... Radiator Cap w/ Gasket Fits: H Replaces: AH539R (3-1/2" O.D., 7/8" height) Radiator Cap w/ Gasket Fits: L, LA, M, 40, 320, 330 series Replaces: AL2275T (1.465" I.D., 5/16" height) NOTE: Zinc plated. Radiator caps w/ gasket, parts continue on next page 361 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Radiator caps w/ gasket, parts cont... Order # JDS921 Price $38.95 Underside view JDS515 $18.95 Underside view JDS1393 $12.95 Cooling parts John Deere Underside view ABC1396 $8.95 Underside view JDS751 $18.80 Underside view JDS1395 $15.95 Underside view ABC1398 $5.95 Underside view 362 Radiator flange fillers Description / Application Radiator Cap w/ Gasket Fits: 50 up to SN: 5016615, 60 up to SN: 6030926, 70 up to SN: 7008449 (All gas) Replaces: AA5158R Radiator Cap w/ Gasket (For (5 PSI) Pressurized System) Fits: 50 SN: 5016616 & up, 60 Regular SN: 6030927 & up, 60 Standard SN: 6043000 & up, 70 gas SN: 7008450 & up, 70 diesel SN: 7017500 & up, 80, 420, 430, 435, 440, 520, 530, 620, 630, 720, 720 diesel, 730, 730 diesel, (820, 830, 840 2 cyls), 1010, 8020, JD Stationary engines 145, 217 Replaces: AA5757R Radiator Cap w/ Gasket & Cover (For (7 PSI) Pressurized System & 3/4" tall Filler Neck) fits: 2040 SN: 350000 & up, 2140 SN: 457686 & up, 2150, 2155 SN: 481900 - 621999, 2255 up to SN: 481900, 2350, 2550 SN: 457686 & up, 2750 SN: 457686 & up, 2940 w/ #AL37566 radiator, 2950 SN: 477104 & up, 3040 SN: 477104 & up, 3140 SN: 477104 & up, 3150, 3640, Replaces: AL38374 (3.470" cover O.D. x 2" tang to tang) Radiator Cap only w/ Gasket (For (7 PSI) Pressurized System) Serviceable for 820 3-cyl. thru 3140 Replaces: AT20719, AT27585, AT29054 (2.330" O.D., 1.500" radiator neck I.D., 2.000" tang to tang) Order # Price JDS358 $25.00 Application Fits: Unstyled AO, AR SN: 260000 - 262699 & SN: 264300 & up, D SN: 143800 & up, R Replaces: D2989R JDS357 $29.95 JDS359 $25.00 JDS794 $99.95 JDS797 $99.95 (Narrow neck) fits: A SN: 477000 - 523599 & SN: 542700 & up, B SN: 60000 - 148499 & SN: 167000 - 200999, G SN: 13000 - 20202 Replaces: AB1607R Fits: B SN: 201000 & up Replaces: B2604R NOTE: Has flange on bottom to attach to tank. Must be soldered in place. Fits: 50 SN: 5016616 & up, 60 SN: 6030927 & up, 60 Standard SN: 6043000 & up, 70 SN: 7008450 & up, 70D, 80, 520, 620, 720, 720D, 820, 830 2 cyls., Replaces: AA5756R USA made NOTE: Brass. Includes overflow tube. Fits: 530, 630, 730, 730D Replaces: AR20515R USA made NOTE: Brass. Includes overflow tube. Radiator / water pipes - USA made NOTE: Bare metal. Must weld to existing casting. Order # Price JDS703 $58.95 Radiator Cap w/ Gasket (For (10 PSI) Pressurized System) Fits: 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6700 Sprayer Replaces: RE24897, RE39103 (2.268" I.D., 2.026" tab to tab, 4.385" O.D. cover) JDS707 $68.95 JDS709 $68.95 Radiator Cap w/ Gasket (For (7 PSI) Pressurized System) Fits: 2251, 2351, 2355, 2555, 2651, 2755, 2855N (All w/ SN: 669788 & up), 2955, 3155, Replaces: AL38374, AL56759 (2.330" O.D., 2.000" tang to tang, 1.096" tall) NOTE: Fits radiators w/ 3/4" tall filler neck. JDS701 $64.95 JDS957 $24.95 Radiator Cap w/ Gasket (7 PSI) Fits: 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630, Replaces: AR28482 Description / Application Upper Radiator Water Pipe Fits: Styled A; Will also fit Styled AR SN: 272000 & up if customer cuts to length Replaces: A2374R, AA2237R (2-7/8" O.D.) Upper Radiator Water Pipe Fits: B SN: 96000 - 200999 Replaces: AB2740R, B1814R Upper Radiator Water Pipe Fits: B SN: 201000 & up Replaces: AB3601R, B2607R Upper Radiator Water Pipe Fits: Styled G Replaces: AF651R, F664R Lower Radiator Water Pipe Fits: M, MC, MI, MT, 40, 320, 330 Replaces: M265T (2" O.D.) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS865 Thermostats - USA made Price Application $5.35 Order # Price ABC1086 $13.50 ABC052 $11.50 Fits as a lower water hose when equipped w/ a water pump: AO, AR both SN: 281400 & up, 60 Standard, Orchard, 620, 630 Orchard, Replaces: B2372R (2-1/16" I.D., 2-1/2" O.D., 4" long) JDS862 $4.95 Lower Radiator Hose Fits: M, 40, 320, 330 series Replaces: L4576T (2" I.D., 2-5/16" O.D., 2-11/16" long) NOTE: 2 used per tractor; Sold individually. Wittek© tower (hose) clamps USA made Fits: John Deere Unstyled, New Generation models Original Style Price Order # IHS637 $3.50 (1.687" - 1.780" size range) IHS638 $3.50 (1.815" - 2.000" size range) IHS639 $3.50 (1.807" - 2.285" size range) IHS640 $3.50 (2.175" - 2.500" size range) IHS641 $3.50 (2.400" - 2.625" size range) IHS642 $3.50 (2.350" to 2.765" size range) IHS643 $3.50 (2.685" to 2.995" size range) $34.95 JDS1471 $5.25 Wire hose clamps Fits: John Deere models NOTE: Sizes provided are the outer diameter (O.D.) of the radiator hose. Order by the O.D. of radiator hose. Order # Price JDS1388 Price $5.85 (2-1/4" dia.) JDS325 $5.95 (2-1/2" dia.) JDS566 $5.85 Replaces: D2304 (2-3/4" dia.) JDS293 $5.85 (3" dia.) JDS568 $6.75 (3-1/4" dia.) JDS352 $5.85 (4" dia.) Fan Drive Disc fits: A, (B SN: 171992 & up unless earlier serial number has been converted to friction drive), G SN: 13910 & up, (H series up to SN: 50499 when converted to friction style fan drive), all H series SN: 50500 & up, 50 thru 730 gas, LP, diesel, Replaces: AB3314R, B2123R (3.627" O.D., .747" spline dia, .989" thick, 10 splines) NOTE: 2 used per tractor; Sold individually. Fan Friction Washer fits: Same as JDS1388; Also fits: D SN: 30400 & up, G SN: 13910 & up, GP SN: 200111 & up, GPW SN: 400000 & up, GPO SN: 15000 & up Replaces: D399R, R105808 (3-1/2" O.D., 1-1/4" I.D., .140" thick) NOTE: 2 used per tractor; Sold individually. Fan assembly Fits: M SN: 27365 & up, (MC, MI, MT SN: 10001 & up), Replaces: AM839T Dimensions JDS570 Description / Application Description Order # Price Fan Assembly............................................................ JDS542......... $69.95 NOTE: Improved design. Sealed bearing; no need to grease. Front pulley is wider than the rear pulley. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 363 Cooling parts (.775" - 1.013" size range) Fits: 320, 330, 420, 430, 440 gas, 1010, 1020, 1520, 2010, 2020, 2510, 2520; Industrials: 300, 301, 302, 350 Crawler, 400, 401, 450 Crawler, 480A, 480B, Replaces: AT313T, AT10996, AT22962 (160° Lo-Temp) NOTE: Gasket is for Ford models only. Fan parts (For bearings see pg. 360) Dimensions $3.50 Thermostat fits: 50 SN: 5016616 & up, 60 gas, LP SN: 6054500 & up, 70 diesel, 80, 520, 530, (620, 630 gas), 720 diesel, 730 diesel, (820, 830, 840 2-cyl.), 3010, 3020, 4000, 4010, 4020, 4230 diesel, 5010, 5020; Industrials: 500, 600, 700, 760 gas, diesel Replaces: AB4744R, AB4745R, R34578, R36846 (180°, 2-1/2" O.D.) John Deere Order # IHS636 Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Hoses All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Fan belts Water pumps, parts cont... NOTE: Verify belt size before ordering. Order # Order # Price ABC010 $14.95 Fits: (820 3-cyl., European 920 up to SN: 75344), (European 930, 940), (1020, 1120 up to SN: 75344), 1530 w/ Bosch alternator, (2020, 2120 up to SN: 75344) Replaces: T23505 (5/8" wide x 45-1/2" long) FDS1458 $12.25 Fits: 3010, 3020, 4010, (4020 up to SN: 200999) gas, LP Replaces: R26606, R41627 (17/32" x 54) ABC191 $10.30 ABC414 $11.55 Application Price $157.95 (For o-ring style bypass tube) Fits: 70 gas SN: 7008100 & up, 720, 730 gas, diesel, Replaces: AF1301R, AF1733R, AF2297R, AF2347R, AF2368R, AF2369R, F1052R, Casting # F2244R (housing), Casting # A4898R (pulley) (3/8" pulley width) NOTE: Does not include bypass plug, for tractors w/out a bypass. Customer must purchase plug JDS1831. JDS1831 $12.95 Water Bypass Plug w/ O-Ring Fits the following gas, LP, diesel models: (A series SN: 584000 & up), AO, AR SN: 272000 & up, (B series SN: 201000 & up), G series SN: 13000 and up, (50 up to SN: 5029199), 60 up to SN: 6054499, (70 up to SN: 7031299), Replaces: F2282R (plug), R375R (o-ring) (0.628" O.D., 1.820" o/a length) USA made NOTE: Serrated end slides in pump, drive straight in, don't twist. JDS2787 $136.95 Fits the following for air conditioner compressor: 4000 thru 4630, 7020 thru 8440, Early 8450 (alternator) Replaces: R46098, R49422, R69562, R71603 (33/64" x 40-3/4") Fits: 4640, 4840, (6030 w/ Hinson cab), 8640 (All for air conditioner compressor) Replaces: R46098, R49422, R63900, R69563, R71602 (1/2" x 41-1/4") Description / Application JDS948 NEW! Fits: 80, 820 2-cyl., 830 2-cyl., 840 Replaces: AR1194 NOTE: Includes pulley & gasket. Water pumps, parts Cooling parts John Deere NOTE: Water pumps are NEW not rebuilt. No exchanged needed. Order # JDS756 JDS764 JDS758 JDS768 364 Price $188.30 $166.95 $190.75 $179.50 Application (For o-ring style bypass tube) Fits: A SN: 700200 & up, (AO, AR SN: 281400 & up), 60 up to SN: 6029999, Replaces: AA5570R, Casting # A4280R (housing), Casting # A4283R (pulley) (1/2" pulley width) USA made NOTE: Includes bypass plug if needed. (For o-ring style bypass tube) Fits: B SN: 306600 & up, 50 up to SN: 5016057, Replaces: AB4262R, Casting # B2886R (housing), Casting # A4283R (pulley) (1/2" pulley width) USA made NOTE: Includes bypass plug if needed. (For o-ring style bypass tube) Fits: 50 SN: 5016058 & up, 520, 530 Replaces: AB4951R, AB4761R, AB4881R, Casting # B3407R (housing), Casting # A4898R (pulley) (3/8" pulley width) USA made NOTE: Includes bypass plug if needed. (For o-ring style bypass tube) Fits: 60 SN: 6030000 & up, 620, 630 Replaces: AA6327R, Casting # A5318R (housing), Casting # A4898R (pulley) (3/8" pulley width) NOTE: Does not include bypass plug, for tractors w/out a bypass. Customer must purchase plug JDS1831. JDS505 $247.95 JDS2939 $28.50 JDS2791 $199.95 JDS2807 $199.95 NEW! Fits: 2010 gas, LP, diesel (Tractor & Forklift only. Will not fit Crawlers) Replaces: AT11918, housing/casting T12712 NOTE: Verify housing # before ordering. Backing plate not included. Single groove pulley. JDS2783 $129.95 NEW! Fits: 3010, 3020, 4000, 4010, 4020, 4230 (All gas, LP w/out air conditioning) Replaces: AR45330 NOTE: This pump is designed to be used w/ a cast iron pulley. If your water pump has a stamped metal pulley, you will also need to order JDS2785. Fits: 420, 430, 440 gas Replaces: AM3060T, Casting # M3038T NOTE: Does not include back plate, If back plate is needed order # JDS2939 NEW! Water Pump Back Plate Fits: 420, 430, 440 gas, LP Replaces: M3045T USA made NEW! Fits: 1010 gas, (1010 Crawler up to SN: 21900 gas) Replaces: Castings T12034, AT12862 NOTE: Includes pulley & gasket. Does NOT include backing plate. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS2785 JDS762 Price $13.95 Amp gauges, parts cont... Order # Price NEW! Water Pump Pulley Spacer Fits: 3010, 3020, 4000, 4010, 4020, 4230 gas, LP, diesel, Replaces: R52833 NOTE: Use w/ JDS2783 or JDS762 pump when stamped steel pulley is used instead of cast iron pulley. Customer will gain housing to pulley clearance. ABC466 $14.95 Fits: 3010, 3020, 4000, 4010, 4020 (All diesel w/out air conditioning) Replaces: AR45332, Casting # R26337, R41318, R44122 IHS474 $14.95 ABC2934 $17.95 ABC342 $1.80 (60-0-60) Fits: A thru 830 2cyl. w/ Alternator system USA made $112.99 Amp gauges, parts NOTE: NJD Gauges have a metal base, glass lens & black bezel. White face gauges were used until mid 1952 then black face gauges were used. For 2" diameter hole. Works on 6-volt or 12-volt. No logo. ABC Gauges have a stainless steel bezel & vary from original appearance. No logo. Order # NJD408 ABC016 Price $24.50 $24.50 Description / Application NEW! (20-0-20) w/ White Face Fits: Styled & Unstyled A up to SN: 700200, B up to SN: 306600, G up to SN: 60700, D (to mid 1952), H, (R to mid 1952), M series (to mid 1952), L, LA, LI, (Will also fit 40 thru 840 2 cyl, but is not correct face color) Replaces: AB1190R, AB2568R, AM354T NEW! (20-0-20) w/ Black Face Fits: Styled A SN: 700200 & up, Styled B SN: 306600 & up, Styled G SN: 60700 & up, Styled D (mid 1952 & up), R (mid 1952 & up), M series (mid 1952 & up), 40, 50, 60, 70, 80, 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840 2-cyl. Replaces: AF2749R, AM1864T $12.25 6-volt Generator Indicator Dash Light Fits: 70D, 80, (720D up to SN: 7214899), 820 up to SN: 8203099 (All w/ Pony start) Replaces: AA4925R (jewel lens), AB4059R (bulb), AA4926R, AF3894R, AR1886R (socket) (1 wire lead) NEW! 12-volt Generator Indicator Dash Light Serviceable for 720D SN: 7222600 & up w/ electric start, 730D w/ Pony or electric start, 820 2-cyl. SN: 8203100 & up w/ electric start, 830 2-cyl. Replaces: AA4925R, AF3894R, AR1886R, AR20959R, AR21163R (2 wire leads, 1.825" total stem length, 15/16" jewel lens, 0.871" housing O.D. to fit 0.875" dash opening) NOTE: Bright enough for 6-volt. 6-volt Light Bulb (For IHS474 Light) (G-3-1/2, miniature bayonnet base, 22 amps) Oil pressure gauges, parts NOTE: NJD Gauges have a metal base, glass lens & black bezel. White face gauges were used until mid 1952 then black face gauges were used. For 2" diameter hole. No logo. ABC Gauges have a stainless steel bezel & vary from original appearance. No logo. When ordering a dash mounted oil pressure gauge you will also need to order (1) of the following fittings depending on the line (20-0-20) Fits: A, B, D, G, H, L, M, 40, 50, 60, 70, 320 thru 440 USA made ABC109 size to adapt your existing line to the gauge: ABC538, IHS626, ABC2360, ABC2353. Order # Price Description / Application NJD420 $24.50 NEW! (0-25 PSI) White Face Fits: A series up to SN: 476999, AO, AR up to SN: 271999, AOS, AI (All), B series up to SN: 59999, D up to SN: 143799, G up to SN: 12999, BO, BR (All), M series (to mid 1952) Replaces: AA1730R, AB292R, AM737T (1/8" NPT male thread) NOTE: Threads into governor or oil filter base. $12.25 (30-0-30) Fits: A, B, D, G, H, L, M, R, 40 thru 830 2-cyl., Replaces: AF2749R USA made Oil pressure gauges, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 365 Cooling parts / Gauges NJD407 Description / Application John Deere Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Water pumps, parts cont... NOTE: NJD Gauges have a metal base, glass lens & black bezel. White face gauges were used until mid 1952 then black face gauges were used. For 2" diameter hole. No logo. Order # Price ABC082 $18.95 ABC005 $18.95 ABC523 $23.95 Oil Gauge Copper Line Kit (For tractors using 1/8" x 6' copper oil line) (6' - 1/8" line, (2) 5/16 - 24 UNF Nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16 - 24 UNF male adaptor) NOTE: Use w/ ABC538 fitting. ABC538 $13.40 Oil Gauge Fitting For gauges w/out removable fitting (1/8" pipe thread to 1/8" compression) USA made NOTE: Brass. Use w/ ABC523 line kit. IHS626 $12.85 Oil Gauge Fitting For gauges w/out removable fitting (1/8" pipe thread to 1/4" compression) USA made NOTE: Brass. ABC2360 $3.95 Oil Gauge Adapter Fitting Serviceable for A, B, D, G, H, R, 50 thru 840 (All w/ dash mounted gauge) (1/8" pipe female to 3/16" tubing female) NOTE: Brass. Original was an elbow fitting. ABC2353 $3.95 ABC Gauges have a stainless steel bezel & vary from original appearance. No logo. When ordering a dash mounted oil pressure gauge you will also need to order (1) of the following fittings depending on the line size to adapt your existing line to the gauge: ABC538, IHS626, ABC2360, ABC2353. Order # Price Description / Application NJD419 $24.50 NEW! (0-25 PSI) White Face Fits: A series SN: 477000 - 700199, AO, AR SN: 272000 to (mid 1952), B series SN: 60000 - 306599, D SN: 143800 to (mid 1952), H series (All), G, GM series SN: 13000 60699; Will also fit later serial numbers, but face color not correct, Replaces: AB1549R (1/8" NPT male thread) NOTE: Dash mounted. Line adapter sold separately. NJD423 $24.50 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Oil pressure gauges, parts cont... Oil pressure gauges, parts cont... $24.50 Gauges NJD864 ABC004 NEW! (0-25 PSI) Black Face Fits: Styled A SN: 700200 & up, Styled B SN: 306600 & up, Styled D (mid 1952 & up), (H, but not correct face color), Styled G SN: 60700 & up, GM, 50, 60, 70, (330, 430, 440 gas - see note below), 520, 530, 620, 630, 720, 730 gas, LP Replaces: AF2752R, AF2775R (1/8" NPT male thread. Mechanical gauge) NOTE: Dash mounted. Line adapter sold separately. Requires purchase of ABC523. NEW! (0-30 PSI) Black Face Fits: 40, 320, 420, (M series mid 1952 & up) Replaces: AM284T (1/8" NPT male thread) NOTE: Threads into oil filter base. Engine mount. $18.95 BACK IN STOCK! (0-30 PSI) Fits: Same as NJD420, NJD864 (1/8" NPT male thread) NOTE: Engine mounted. Threads into governor or oil filter base. NJD1702 366 $29.95 Description / Application (50 PSI) Fits: A thru 730 gas, LP (1/8" NPT male thread) NOTE: Dash mounted. Stainless steel bezel. Line adapter sold separately. (80 PSI) Fits: 70 diesel thru 840 (1/8" NPT male thread) NOTE: Dash mounted. Line adapter sold separately. Oil Gauge Adapter Fitting (1/8" pipe female to 1/4" tubing female) Transmission gauges NOTE: JDS Gauges have a metal base, glass lens & stainless steel bezel. No logo. NEW! (0-55 PSI) Black Face Fits: R mid 1952 & up; Will also fit earlier R, but face plate color is not correct, 70D, 80, 720D, 730D, 820 2-cyl., 830 2-cyl. Replaces: AF2729R, AF2868R (1/8" NPT male thread) NOTE: Dash mounted. Line adapter sold separately. Order # Price JDS2765 $39.95 Description / Application NEW! Transmission Oil Temperature Gauge fits: 2510, (3020 up to SN: 122999), 4020 up to SN: 200999; Industrials: 500, (500A up to SN: 123113), 600 up to SN: 200999 (All w/ power shift transmission) Replaces: R34258 (2.036" housing O.D., 51" long capillary lead, 5/8"-18 UF probe end & 1/2" NPT pipe bushing) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS2762 $39.95 JDS2683 $39.95 Description / Application NEW! Transmission Oil Temperature Gauge fits: 3020 SN: 123000 & up, 4000, (4020 SN: 201000 & up), 4320, 4520, 4620; Industrial: 500A SN: 123114 - 152141, 500B, 500C, 510, (600 SN: 201000 & up) (All w/ power shift transmission) Replaces: AR46979 (65" capillary lead, 2.036" gauge housing O.D., 5/8" - 18 UF probe end, 1/2" NPT pipe bushing) NOTE: Includes provisions for fiber optic light. NEW! Transmission Oil Pressure Gauge Fits: 500, (500A up to SN: 123113), 600, 2510, (3020 up to SN: 122999), 4020 up to SN: 200999 (All w/ powershift transmission) Replaces: R34259 (2.030" housing O.D., 1/8" NPT male thread) Water temperature gauges cont... Description / Application NEW! Water Temperature Gauge, White Face fits the following up to mid 1952: Some A, AO, AR, B, D, G, GN, GM, GW, H, (M, MC, MI, MT, R up to mid 1952); Will also fit the following models, but does not have the correct face color: 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, Replaces: AA1342R, AM610T, AM1609T (72" lead) NOTE: Will not fit 435, 440 diesel w/ electrical gauge. Measure length before ordering. NJD1718 $29.50 NEW! Water Temperature Gauge, Black Face fits: Styled A series SN: 700200 & up, (B SN: 306600 & up, but lead will be longer), Styled D (mid 1952 & up), Styled G SN: 60700 & up, M series (mid 1952 & up), R (mid 1952 & up), 40, 50, 60, 70, 70D, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830 2-cyl., 840 2-cyl. gas, LP, diesel, Replaces: AA6295R, AA7263R, AF2192R, AF2774R, AM2444T, AM3092T, AM3950T, AT13849T, AR20783 (48" right angle lead) NOTE: Measure length before ordering. NJD424 $29.50 NEW! Water Temperature Gauge, Black Face fits: Some Styled A SN: 700200 & up, B SN: 306600 & up, G SN: 607000 & up (36" lead) NOTE: Will not fit 435, 440 diesel w/ electrical gauge. Measure length before ordering. NJD425 $29.50 NEW! Water Temperature Gauge Fits: Some A SN: 700200 & up, Styled AR (mid 1952 & later), B SN: 306600 & up, Styled D (mid 1952 & later), G SN: 60700 & up, M series (mid 1952 & later), R (mid 1952 & later), 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830 (2 cyl.), 840 (2 cyl. diesel), Replaces: AR490R, AA6295R, AA7263R, AM2444T, AT13849T, AR20783R (72" lead) NOTE: Will not fit 435, 440 diesel w/ electrical gauge. Measure length before ordering. JDS2779 $39.95 Water temperature gauges NOTE: NJD Gauges have a metal base, glass lens & black or stainless steel bezel. White face gauges were used until mid 1952 then black face gauges were used. No logo. For 2" diameter hole. ABC Gauges have a chrome bezel & vary from original appearance. No logo. Order # Price NJD1469 $34.50 Description / Application NEW! Water Temperature Gauge, White Face fits: A up to SN: 476999, (AR, AO up to SN: 264299), B up to SN: 166999, BR, BO, D SN: 125430 - 143799, G up to SN: 12999, H Replaces: AA883R, AA3538R (23" lead) NOTE: Measure length before ordering. NJD1539 $29.50 NEW! Water Temperature Gauge, White Face fits: Styled A series SN: 477000 700200, Styled B series SN: 60000 - 306600, Styled D SN: 143800 - mid 1952, Styled G SN: 13000 - 60700, M series to mid 1952 Replaces: AA1342R, AA3534R, AA3535R, AM2444T (48" right angle lead) NOTE: Measure length before ordering. NJD421 $29.50 NEW! Water Temperature Gauge, White Face fits the following up to mid 1952: Some A, AO, AR, B, D, G, GN, GM, GW, H; Will also fit the following models, but does not have the correct face color: 50, 60, 70, 520, 530, 620, 630, 720, 730 Replaces: AA883R, AA3538R (36" lead) NOTE: Measure length before ordering. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com NEW! Water Temperature Gauge Fits the following tractors / Crawlers: 1010, 2010 up to SN: 42000 gas, diesel; Also fits 8020 tractors thru 1963 Replaces: AT11934, AT14203 (49-1/2" lead, 0.892" housing depth) Water temperature gauges, parts continue on next page 367 Gauges Price $29.50 John Deere Order # NJD422 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Transmission gauges cont... Fuel gauges NOTE: NJD Gauges have a metal base, glass lens & black or NOTE: For 2" diameter hole. No logo. stainless steel bezel. White face gauges were used until mid 1952 then black face gauges were used. No logo. Order # Price JDS1910 $39.95 JDS1707 $39.95 JDS1712 $53.50 JDS2777 $39.95 NEW! 12-volt Positive Ground Fuel Gauge Fits the following tractors & Crawlers: 1010 & 2010 up to SN: 42000; Fits the following tractors: 3010, 4010, 8020 Replaces: AR26716 (0-72 Ohms. 1.205" housing depth) JDS776 $39.95 12-volt Negative Ground Fuel Gauge Fits: 2520, (3020 SN: 123000 & up), (4020 SN: 201000 & up), 4320, 4520, 4620, (5020 SN: 025000 & up), 6030, 7020, 7520; Combines: 3300, 4400, 4420, 6600, 7700 gas, diesel, Replaces: AR45436 (30-250 Ohms) For 2" diameter hole. ABC Gauges have a chrome bezel & vary from original appearance. No logo. Order # Price JDS2781 $39.95 Description / Application NEW! Water Temperature Gauge Fits: 1010, 2010 both SN: 42001 & up gas, diesel, Replaces: AT17524 (53" lead) JDS787 JDS785 $39.95 $39.95 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Water temperature gauges cont... Water Temperature Gauge Fits: 2520, (3020 SN: 123000 & up), (4020 SN: 201000 & up), 4320, 4520, 4620, 7020; Combines: 3300, 4400, 4420, 6600, 7700 gas, diesel, Replaces: AR48640, AR45435 (26" lead) NOTE: Max temp is 247 degrees and the minimum is 100 degrees (Fahrenheit). $39.95 Gauges JDS783 Water Temperature Gauge Fits the following gas, diesel models through 1968: 2510, (3020 up to SN: 122999), 4020 up to SN: 200999, 5010, (5020 up to SN: 024999), Replaces: AR36383, R34263 (29" lead) NOTE: Max temperature is 250 degrees and minimum is 100 degrees (Fahrenheit). NEW! Water Temperature Gauge Fits: 3010, 4010 gas, diesel Replaces: AR26720, AR31901 (29" lead) ABC239 $27.25 368 $29.95 Water Temperature Gauge Fits: John Deere models using a zone style gauge (60" lead, 5/8-18 UNF w/ 1/2" pipe bushing) NOTE: Dash or governor mounted. 6-volt Positive Ground Fuel Gauge Fits the following w/ Pony engine start: 70D, 80, 720D, 820, 730D, 820, 830 Replaces: AF2170R, AF2739R (0-30 Ohms) 12-volt Positive Ground Fuel Gauge Fits: 520, 530, 620, 630, (720, 730 gas, diesel w/ electric start), (820, 830 2 cyls. w/ electric start), Replaces: AF2721R (0-30 Ohms) = NOTE: Use w/ JDS1712. 6 or 12 volt Positive Ground Fuel Sending Unit Fits: 70, 70, 520, 530, 620, 630, 720, 730, 820 & 830 2-cyl., Replaces: AB5139R, AF2173R, AR1112R (0-30 Ohms) USA made NOTE: Use w/ JDS1910 or JDS1707. Tachometers, parts Water Temperature Gauge Fits: A thru R, 40 thru 830 2 cyl. (110º - 230º temperature range, 90º pointer sweep, 72" lead, 5/8-18 UNF w/ 1/2" pipe bushing) NOTE: Dash mounted. ABC1593 Description / Application Order # Price NJD584 $128.50 Description / Application NEW! Tachometer fits: 520, 530, 620, 630, 720, 720D, 730, 730D; Serviceable for A SN: 648000 & up, B SN: 201000 & up, (AR, AO SN: 272000 & up), 50, 60, 70, 70D Replaces: AF2066R, AF2698R, AR20053R, AR20055R, AR20836, AR21661, AR21662, AR21664R JDS1508 $174.95 Tachometer fits: 1020, 1520, 1530, 2020, 2030, (2040, 2240, 2440, 2640 All up to SN: 340999), 2630 Industrials: 300 up to SN: 131260, 300B, 301, 301A, 302, 302A, (400 up to SN: 131260), 401, 401A, 401B, 401C Replaces: AR50954, AR65445, AT20641 AT159296, T22409 (Counter clockwise rotation) NOTE: Will NOT fit 2010. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS1499 $174.95 Description / Application Tachometer Fits: 1010 except Crawler Replaces: AT13366, AT16682, AT17443, AT17448 JDS1982 JDS1013 (Red needle) Speed Hour Meter (Tachometer) Fits: 2010 SN: 29001 & up gas, LP, diesel Replaces: AT17444, AT16678 (4.375" housing O.D., 2.704" o/a length, 4.802" bezel O.D.) NOTE: Clockwise rotation. Order # Price JDS1010 (White needle) $189.95 JDS999 (Red needle) $189.95 $189.95 Tachometer fits the following w/ syncro range transmission: 2510, 2520, 3020 gas, LP, diesel, Replaces: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, $189.95 AR50404, RE206853 NOTE: Red needle was used thru 1968. White needle tachometer has provision for back light & fiber optics. JDS1003 (White needle) Description / Application Tachometer fits the following w/ powershift transmission: 2510, 2520, 3020, (4020 SN: 250001 & up) gas, LP, diesel Replaces: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 NOTE: Red needle was used thru 1968. White needle tachometer has provision for back light & fiber optics. Tachometer fits the following w/ powershift transmission: 4000, (4020 up to SN: 250000), 4520, 4620, 600 Industrial gas, diesel, Replaces: AR32827, AR39902, AR45445, AR48022, AR50403, AR50407, $189.95 RE206857 NOTE: Red needle was used up to 1968. White needle tachometer has provision for back light & fiber optics. John Deere JDS1015 (White needle) $184.95 Tachometers, parts cont... Lead, Knob, Brackets JDS991 (White needle) JDS1006 (Red needle) $29.95 JDS993 $9.95 JDS1782 $24.95 JDS597 $24.95 $189.95 Tachometer fits the following w/ syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 700 Industrial gas, LP, diesel Replaces: AR26718, AR30143, AR32833, $189.95 AR39906, AR39908, AR45444, AR48021, AR50402, AR50406, RE206855 NOTE: Red needle was used thru 1968. White needle tachometer has provision for back light & fiber optics. $189.95 Tachometer fits the following w/ powershift transmission: 2510, 2520, 3020, (4020 SN: 250001 & up) gas, LP, diesel Replaces: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 NOTE: Red needle was used thru 1968. White needle tachometer has provision for back light & fiber optics. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Fiber Optic Lead fits: 2520, 3020, 4000, 4020, 4520 (All w/ side console) Replaces: AR48016 (8" long) USA made Gauges JDS995 (Red needle) JDS2549 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Tachometers, parts cont... Tachometer Knob fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520 Replaces: AR30282, AR40802 NOTE: Black aluminum. Tachometer Bracket fits: A, AN, AW (All SN: 648000 & up), (AO, AR SN: 272000 & up), B, (BN, BW SN: 201000 & up), (50, 60 gas, LP), Replaces: A4875R USA made NOTE: Powder coat JD green. Tachometer Bracket Fits: G, GN, GW, 70 gas, LP Replaces: F1508R USA made 369 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Tachometer cables Order # Price JDS712 $34.95 JDS790 $29.95 JDS786 JDS1198 $34.95 $34.95 Gauges/ Electrical parts John Deere JDS777 $34.95 JDS1209 JDS792 $34.95 Tachometer cables cont... Description / Application Order # Price ABC565 $13.95 JDS1838 $23.50 Tachometer Cable w/ Metal Sheath Fits: 520, 530, Replaces: AB5135R, AB5241R, AB5242R, AR20829R, AR21229R, AR21230R (11-3/4" long INNER CABLE) Tachometer Cable w/ Nylon Sheath Fits: 820 & 830 (3-cyl.), 1020, 1030, 1035, 1120, 1130, 1530, 1630, (2040, 2240 up to SN: 349999 as a speed-o-meter / hour meter cable); Industrials: 300, 301, 401 Replaces: AL23837, AT19905 (23.690" long) JDS1802 $39.95 Tachometer Cable w/ Metal Sheath Fits: 620, 630 Standard, Rowcrop gas, LP Replaces: AA6573R, AA6737R, AA6738R, AR20833R, AR21233R, AR21234R (13-3/4" long) Tachometer Cable w/ Nylon Sheath Fits: 1010, 2010, 5010, 5020, 6030, 7520 Industrials: 700, 1010 Crawler, 2010 Crawler Replaces: AT17503 (43-1/8" long) NOTE: Measure before ordering. JDS2731 $26.80 NEW! Tachometer Cable Fits: 500A SN: 123114 - 152141, 500B, 500C, 510, 4230, 7020, Replaces: AR60876 (complete cable), AR62311 (inner only) (36" long) JDS2733 $26.80 NEW! Tachometer / Speed Hour Meter Cable fits: 4040, 4240, 4350, 4440, 4630, 4640, 4840, (some 8440, 8640), (6600 w/ 404), 6602, 7700, Replaces: AR21085 (39" long) Tachometer Cable w/ Metal Sheath Fits: A, AR, AO, B, G, 50, 60, 70 gas Replaces: AB4737R, AB4765R, AB4776R (7-1/2" long) Tachometer Cable w/ Metal Sheath Fits: 420, 430, 440 gas, 8440, 8630, 8640 Replaces: AM3131T, AR70112 (56" long w/ key) NOTE: Limited supply, replacing w/ nylon sheath. Tachometer Cable w/ Metal Sheath Fits: 70 diesel, 720 gas, LP, diesel, 730 gas, LP, Replaces: AA6573R, AF2067R, AF2245R, AF2246R, AF3258R, AF3259R, AF3260R, AR20834R, AR20835R, AR20837R, AR20839R, AR21160R, AR21161R (17-3/4" long) Tachometer Cable w/ Metal Sheath Fits: 730 diesel Replaces: AR20838R, AR21159R (21-3/4" long) Order # Price ABC395 $24.95 Tachometer Cable w/ Nylon Sheath Fits: 1520, 2020, 2030, (2040, 2240 both up to SN: 349999), (2440, 2640 both up to SN: 340999), 2630; Industrials: 300B, 301A, 302, 302A, 400, 401A,B,C, Replaces: AL23838, AT19904 (24.190" long) ABC1868 $19.95 Tachometer Cable w/ Metal Sheath Fits: Some 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620; Industrials: 500, 500A up to SN 123113, 600; Combines: 3300, 4400, 4420, 6600, Replaces: AR26721 (33-1/4" long) NOTE: Limited supply, replacing w/ nylon sheath. ABC2285 $4.95 Tachometer Cable w/ Metal Sheath Fits: 80, 820, 830 (2-cyl.) Replaces: AR1318R, AR1357R (80" long) $23.50 JDS722 $24.95 370 Tachometer Cable w/ Metal Sheath Fits: 4030 Replaces: AR60877 (30-1/2" long) Electrical outlet socket, parts $38.50 JDS1836 Description / Application Description / Application Electrical Outlet Socket (For Implements w/ Lights) Fits: John Deere models Replaces: AM2049T NOTE: 2 plated brass pins. Auxiliary Male 2-Pin Connector Plug (For ABC395), Replaces: AA5692R (3.045" long, .760" wide, .340" hole dia. for wires) NOTE: Plated brass pins, wires must be soldered or crimped. Electrical Outlet Socket Boot Fits: Tractors using single wire outlet NOTE: 1 wire style. Does not fit ABC395. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Heavy Duty; Straight terminals unless otherwised noted EO = Eyelet Opening Battery boxes / covers cont... Order # Price JDS966 $44.70 IHS721 $8.95 L = Length Order # Price Specifications ABC401 $13.90 (2 Gauge, EO = 7/16", L = 6") ABC411 $15.80 (2 Gauge, EO = 7/16", L = 9") ABC405 $17.95 (2 Gauge, EO = 1/2", L = 13") ABC1175 $17.30 (2 Gauge, EO = 7/16", L = 14") ABC421 $22.50 (2 Gauge, EO = 3/8", L = 19") ABC403 $25.85 (2 Gauge, EO = 7/16", L = 24") Ground Cables (Non-Insulated) $16.99 (2 Gauge, EO = 3/8", L = 10-1/2") ABC415 $15.40 (2 Gauge, EO = 3/8", L = 12") ABC413 $19.15 (2 Gauge, EO = 3/8", L = 14-1/2", 90º terminal ends) ABC1582 $12.15 (2 Gauge, EO = 3/8", EYELET BOTH ENDS, L = 16-1/4") ABC417 $18.50 (2 Gauge, EO = 3/8", L = 21") ABC419 $19.95 (2 Gauge, EO = 3/8", L = 27") JDS115 $99.45 3-Piece Battery Cover Set (17 gauge) Fits: A SN: 477000 - 583999 Replaces: A2227R (Top), AA1999R (RH), AA2000R (LH) USA made FDS372 $34.95 FDS369 JDS866 $23.75 $49.30 Top Cover only Fits: Same as JDS115 USA made $44.95 LH Cover only Fits: Same as JDS115 USA made Description / Application Battery Hold Down Fits the following w/ group 1 battery: Styled A SN: 477000 - 583999, Styled B SN: 60000 - 200999, Replaces: AA3165R, AB2935R (9-1/8" long x 7-1/8" wide) Battery Hold Down fits the following w/ group 1 battery: Styled A SN: 584000 & up, (AO & AR SN: 272000 & up) (2 used); Styled B series SN: 201000 & up, Styled G SN: 26000 & up (2 used); L SN: 640000 & up, LI, LA, M series, R, 80; 820, 830 both w/ Pony start; 60 (2 used); 70 gas (2 used); 720 gas, 730 gas (2 used) Replaces: AB3586R, AL2818T (9-3/16" long x 7-1/16"wide; Mounting holes c.c. = 10-1/8") USA made NOTE: 16 gauge steel. New & improved quality! Battery Hold Down w/ Hardware Fits: 50, (60 SN: 6017061 & up), 60 Standard SN: 6043000 & up, 520, 530, 620, 630 Replaces: AA6597R, AA7338R, AB4650R (9-1/4" inside length x 7-1/8" inside width) USA made JDS115R Electrical parts Price $35.75 John Deere Order # JDS115T JDS115L Battery boxes / covers Battery Hold Down (For 6-volt Battery) Fits: 70 diesel, 720 diesel, 730 diesel (All w/ Pony start), Replaces: AF2079R, AF3819R (9-3/16" inside length x 7-1/4" inside width) USA made Universal Battery Hold Down Bolt, Pair Fits: John Deere models (5/16"-18" UNC x 10-3/4") Insulated Battery Cables ABC407 Description / Application $44.95 RH Cover only Fits: Same as JDS115 USA made JDS149 $155.00 Battery Box w/ Tray & Bushings JDS924 $28.95 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Battery cables - USA made Fits: A SN: 584000 & up, G SN: 26000 & up Replaces: AA3954R, AA4841R, AA4941R (box); AA4013R (tray); B2562R (upper bushing), A3419R (lower bushing) (15-1/2" long x 11-3/4" wide x 10-1/4" high) NOTE: Powder coat JD green. Stamped "Center Line"; Restoration quality. Battery Tray only Fits: Same as JDS149 NOTE: Powder coat JD green. Battery boxes / covers continue on next page 371 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Electrical parts Battery boxes / covers cont... Battery boxes / covers cont... Order # JDS936 JDS940 JDS114 Price $5.00 $6.00 Description / Application Battery Tray Bushing fits: A SN: 584000 & up (upper bushing); AO, AR both SN: 272000 - 283615 (upper & lower bushing); B SN: 201000 & up (upper & lower bushing); G SN: 26000 & up (upper bushing), R up to SN: 17882, Replaces: B2562R (11/16" H x 3/4" O.D., 3/8" I.D.) NOTE: 4 to 8 used per tractor; Sold individually. Battery Tray Bushing fits: A SN: 584000 & up (lower bushing), G SN: 26000 & up (lower bushing), Replaces: A3419R (11/16" H x 1-1/16" O.D., 3/8" I.D.) NOTE: 4 used per tractor; Sold individually. $35.75 JDS114L $44.95 Top Cover only Fits: Same as JDS114 USA made LH Cover only Fits: Same as JDS114 USA made 372 $86.00 JDS868 $83.95 JDS739 $80.50 JDS202 (LH) $86.75 JDS209 (RH) $99.95 $44.95 Description / Application Battery Lid Fits: Styled D SN: 153989 & up Replaces: AD2417R USA made Battery Tray Fits: Same as JDS181 Replaces: AD2416R USA made Battery Cover Fits: L SN: 640000 & up, LA, LI Replaces: AL2858T USA made NOTE: Customer must drill holes for the retainer bolts. Powder coat green. Battery Covers or Tray USA made Fits: M, MI, MT, (MC w/out subframe) JDS202: Replaces: AM957T (cover), M397T (wing nut), M398T (hinge) NOTE: Includes a wing nut & hinge. JDS209: Replaces: AM358T NOTE: Includes a latch & toolbox. RH Cover only Fits: Same as JDS114 USA made JDS811 JDS326 $99.45 JDS114T JDS212 Price $99.95 Battery Tray w/ Clamp & Hardware Fits: H Replaces: H939R (tray), AH974R (clamp) USA made 3-Piece Battery Cover Set (17 gauge) Fits: B SN: 96000 - 200999 Replaces: B1937R (Top), AB2925R (RH), AB2926R (LH) USA made JDS114R Order # JDS181 JDS206 (Tray) $68.50 JDS910 $19.35 JDS201 (LH) $86.75 JDS206: Replaces: AM394T $139.45 Battery Box w/ Dimple Fits: B SN: B201000 & up, R, 80 Replaces: AB4101R (12" long x 10" wide x 9-3/4" high) USA made NOTE: Has rails for regular sliding seat, but will accept float ride if 4 holes are drilled into battery box. If tray is needed, order JDS811 sold separately. Powder coat JD green. Stamped "Center Line". $38.50 Battery Tray w/ Clips fits: Styled AR, AO, B SN: 201000 & up, R, (60 Standard up to SN: 6042999), 60 Orchard, 80, 820, 830, 840 Replaces: AB3585R, AR1326R (tray); B2560R, B2561R, B2571R (clips) USA made Wing Fastener w/ Knurled Cross Pin (For Battery Door) Fits: M series, 40, 320, 330, 420, 430 Replaces: F2134R, M316T, M397T, M1896T (Pin = .309" dia., .713" long) USA made NOTE: Yellow zinc plated. Battery Covers or Tray USA made Fits: 40, 320, 420 JDS201: Replaces: AM1809T (cover), M1896T (wing nut) NOTE: Includes a wing nut. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS208 (RH) $99.95 Description / Application Battery boxes / covers cont... Order # Price $68.50 JDS200 (LH) $75.95 JDS207 (RH) JDS208: Replaces: AM1800T NOTE: Includes a latch & toolbox. $164.95 Battery Box fits: 70 diesel w/ Pony start JDS594 $138.60 Battery Box fits: 720 diesel, 730 diesel (Both JDS474 $149.95 Battery Box fits: 720 diesel, 730 diesel, 830 JDS242 $139.95 Battery Box w/out Dimple fits: 820, 830 JDS197 $49.95 JDS022 (LH) $77.20 JDS205: Replaces: AM1793T $86.75 Battery Covers or Tray USA made Fits: 330, 430 JDS200: Replaces: AT10786T NOTE: Includes a wing nut. JDS207: Replaces: AT11065T NOTE: Includes a latch. JDS204 (Tray) JDS472 JDS081 JDS473 Replaces: AF2077R (15-1/2" long x 13" wide x 10-1/4" high) USA made NOTE: Has toolbox door. Has rails for regular sliding seat, but will accept float ride if 4 holes are drilled into battery box. Powder coat green. Stamped "Center Line". $68.75 $139.95 $114.95 $139.95 w/ Pony start), Replaces: AF3846R (15-1/2" long x 13" wide x 10-1/4 high) USA made NOTE: Does not have toolbox door. Has rails for regular sliding seat, but will accept float ride if 4 holes are drilled into battery box. Powder coat JD green. Stamped "Center Line". 2-cyl.(All w/ electric start & float ride seat) (Will hold four 6-volt batteries) Replaces: AR20196 (19" long x 14-7/8" wide x 10-1/4" high) USA made NOTE: Powder coat green. Stamped "Center Line". JDS204: Replaces: AT11064T NOTE: Does not include a tie down. Battery Box fits: 50, 60 w/ PTO bracket Replaces: AA5290R, AA7337R (15-1/2" long x 10-1/4" wide x 10-1/4" high) USA made NOTE: Has rails for regular sliding seat, but will accept float ride if 4 holes are drilled into battery box. Powder coat. Stamped "Center Line". Economy Battery Box fits: 50, 60, 520, 530, 620, 630, Replaces: AA5290R, AA6731R, AA7337R (15-1/2" long x 10-1/2" wide x 10-1/4" high) NOTE: This battery box has the PTO bracket for the 50 & 60 AND the three square holes for the 520-630 PTO bracket. Has rails for regular sliding seat, but will accept float ride if 4 holes are drilled into battery box. Battery Box fits: 520, 530, 620, 630 w/ 3 square holes, Replaces: AA6731R (15-1/2" long x 10-1/4" wide x 10-1/4" high) USA made NOTE: Powder coat JD green. Stamped "Center Line". Fits float ride seat. JDS023 (RH) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 2-cyl, (840 2 cyl up to SN: 8400199) (All w/ Pony start & regular seat) Replaces: AR1565R (12-1/8" long x 10-1/4" wide x 9-3/4" high) USA made NOTE: Has rails for regular sliding seat, but will accept float ride if 4 holes are drilled into battery box. Powder coat green. Stamped "Center Line". $77.20 Battery Door Cover fits: 300 Industrial, 301, 400, 401, 480 series, 820, 830 (German), 1020, 1520, 1530, 2020, 2030, (2040, 2240 & 2440 All up to SN: 349999), 2630, (2640 up to SN: 349999), Replaces: AT20026 Battery Box fits: 500, 500A, 2510, 2520, 3010, 3020, 4010, 4020, 4320, 4520, 4620 JDS022 Replaces: AR20210, AR26617, AR34819, AR40208, AR40674 JDS023 Replaces: AR26618, AR34185, AR40207, AR40209, AR40673 NOTE: Powder coat JD green. 373 Electrical parts JDS591 Replaces: AF3005R (15-5/8" long x 13-1/4" wide x 10-1/2" high) USA made NOTE: Has rails for regular sliding seat, but will accept float ride if 4 holes are drilled into battery box. Powder coat JD green. Stamped "Center Line". John Deere $142.95 Battery Box fits: 70, 720, 730 gas Battery Covers or Tray USA made Fits: 40, 320, 420 JDS205 (Tray) Description / Application JDS334 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Battery boxes / covers cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Electrical parts Wiring harnesses - USA made NOTE: Wiring harness kits include light wires and diagram. Original style braiding w/ soldered & sealed terminals. Like original. Alternator conversion harnesses also available by special order. Call or email for a quote. Order # Price JDS806 $158.40 (For 6-volt generator systems only) fits: A w/ magneto or distributor up to SN: 584000 w/ cut-out relay JDS808 $167.20 (For 12-volt generator systems only) fits: A w/ magneto or distributor SN: 584000 & up w/ voltage regulator JDS810 $158.40 (For 6-volt generator systems only) fits: B w/ magneto or distributor up to SN: 201000 w/ cut-out relay JDS812 $167.20 (For 6-volt generator systems only) fits: B w/ magneto or distributor SN: 201000 & up w/ voltage regulator JDS814 $167.20 (For 12-volt generator systems only) fits: G w/ magneto or distributor SN: 26000 & up w/ voltage regulator JDS816 $149.60 (For 6-volt generator systems only) fits: H w/ magneto or distributor w/ cut-out relay JDS818 $209.95 (For 6-volt generator systems only) fits: M, MC, MI, MT (All w/ cut-out relay) JDS2698 $209.95 NEW! (For 6-volt generator systems only) fits: 40 JDS2251 $158.50 (For 12-volt generator systems only) fits: 60 Rowcrop SN: 6030000 & up JDS2262 $168.50 (For 12-volt generator systems only) fits: 70 Rowcrop gas, All fuel AF1698R, AF1734R JDS2883 $219.35 NEW! (For 6-volt generator systems only) fits: 70D Rowcrop w/ Pony start AF2271R JDS820 $219.35 (For 6-volt generator systems only) fits: 330, 430 series w/ voltage regulator; Serviceable for 320, 420, but will have an extra wire on the harness for electric oil pressure gauge that will not be used JDS2270 $212.50 (For 12-volt generator systems only) fits: 520, 620, 720 Rowcrop gas, All fuel w/ cowl mounted lights AA6826R, AA7350R, AB5298R, AB5560R, AF3327R JDS2887 $228.50 NEW! (For 12-volt generator systems only) fits: 520, 620, 720 Rowcrop LP w/ cowl mounted lights AA6828R, AA7352R, AB5299R, AB5561R, AF3329R JDS2885 $224.50 NEW! (For 12-volt generator systems only) fits: 620, 720 Standard gas, All fuel AA6829R, AA7353R, AF3828R JDS2903 $228.50 NEW! (For 6-volt generator systems only) fits: 720D Rowcrop w/ Pony start & cowl mounted lights AF3456R JDS2905 $234.75 NEW! (For 6-volt generator systems only) fits: 720D Standard w/ Pony start AF3457R JDS2891 $212.50 NEW! (For 12-volt generator systems only) fits: 530, 630, 730 Rowcrop gas, All fuel w/ cowl mounted lights AR21114R JDS2895 $212.50 NEW! (For 12-volt generator systems only) fits: 530, 630, 730 Rowcrop LP w/ cowl mounted lights AR21117R, AR21119R JDS2893 $249.95 NEW! (For 12-volt generator systems only) fits: 530, 630, 730 Rowcrop gas, All fuel w/ 4 light flat fender lighting AR21115R JDS2897 $212.50 NEW! (For 12-volt generator systems only) fits: 530, 630, 730 Rowcrop LP w/ 4 light flat fender lighting AR21118R, AR21120R JDS2899 $224.50 NEW! (For 12-volt generator systems only) fits: 630, 730 Standard gas w/ clam shell fender lighting AR21116R JDS2901 $224.50 NEW! (For 12-volt generator systems only) fits: 630, 730 Standard LP w/ clam shell fender lighting AR21121R JDS2907 $212.50 NEW! (For generator systems only) fits: 730D Rowcrop w/ Pony start & cowl mounted AR21122R lights 374 Applications Replacement number(s) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS2911 $258.85 Applications NEW! (For 6-volt generator systems only) fits: 730D Rowcrop w/ Pony start & 4 light flat fender lighting AR21123R JDS2909 $212.50 NEW! (For 12/24-volt generator systems only) fits: 730D Rowcrop w/ electric start & cowl mounted lights AR21125R JDS2913 $254.40 NEW! (For 12/24-volt generator systems only) fits: 730D Rowcrop w/ electric start & 4 light flat fender lighting AR21126R JDS920 $92.95 Fender Light Harness Kit only (For 4-Light Flat Top Fenders) fits: 530, 630, 730; Serviceable for 520, 620, 720 JDS2915 $234.75 NEW! (For 6-volt generator systems only) fits: 730D Standard w/ Pony start AR21124R JDS2917 $228.50 NEW! (For 12/24-volt generator systems only) fits: 730D Standard w/ electric start AR21122R Fuse holder Fits: 50, 60, 70, 70D, 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 720D, 730, 730D Replaces: AA5988R, AF2753R, AM3120T, AR20711R USA made Description Order # Replacement number(s) Ignition parts Order # Price Terminal Insulator Assembly (Square style) (For Delco Distributor) Fits: A, B, G, H, 50, 60, 70, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, Replaces: 817363, 1909206, 1914142, 1916805, 1916806, 12H290R NOTE: Fits distributor housings w/ .300" dia. hole w/ keyway. ABC498 $14.95 Terminal Insulator Assembly (Round style) (For Delco Distributor) Fits: M, MC, MI, MT, 40, 320, 330 Replaces: 810794, 817363, 1847646, 1847647, 1878405 NOTE: Fits distributor housings w/ .345" dia. round hole. ABC011 (6-volt) $19.95 ABC509 (12-volt) $19.95 ABC348 $57.10 JDS906 $20.75 Price NOTE: Restoration quality. Anodized aluminum knob engraved w/ the word "LIGHTER". Order # ABC1862 Price Description / Application $29.95 6-volt Cigarette Lighter w/ Socket Fits: 40 thru 830 w/ Pony start w/ 6-volt system, Replaces: AM1949T IHS949 ABC1925 $29.95 12-volt Cigarette Lighter w/ Socket Fits: A series SN: 584000 & up, (AR, AO SN: 272000 & up), G series SN: 26000 & up), 50, 60, 70 gas, LP, 520, 530, 620, 630, (720, 730 gas, LP), (820, 830 diesels w/ electric start) gas, LP; Serviceable for 1010 - 5010, 1640 - 8640, 2150 - 8850, 2155 - 4955, most newer John Deeres Replaces: AA5734R, AR20438, AR48643 $29.95 12-volt Cigarette Lighter w/ Socket Fits the following w/ 12-volt system: 1010 thru 9620T, Replaces: AR21327, AR30052, AR34556, AR46079, AR48643, AR60937, AT26407 NOTE: Restoration quality. Electrical parts $14.95 John Deere ABC500 Fuse holder................................................................ ABC389....... $10.95 NOTE: Rated at 20 AMP. Fits in 1/2" hole. Cigarette lighters Description / Application Distributor Coil (Metal Housing) & Mounting Bracket Fits: John Deere models ABC011 Replaces: AM373T, D502, 1115379 ABC509 Replaces: U505, 1115380 NOTE: ABC509 is internally resisted. See website for full applications. HOT Coil (55000-volts) Fits: 12-volt systems NOTE: Maximum voltage for faster starting, reduced plug fouling & longer plug life. Must use w/ ABC366 resistor. Distributor Coil Bracket only Fits: A, B, G series; 50, 60, 70, 520, 530 Replaces: AA4883R USA made NOTE: Bare metal. Mounts to fanshaft. Ignition parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Wiring harnesses - USA made cont... 375 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Electrical parts Ignition parts cont... Order # ABC366 Price $7.75 Ignition parts cont... Description / Application Order # Universal 12-volt Voltage Resistor (2-Terminal Style) Fits: John Deere models NOTE: Used to step down 12-volt battery. Limits voltage to coil when using 12-volt battery. 1.5 OHMs on 6-volt battery to 4.0 OHMs for 12-volt battery. Resistor gets very hot. ABC420 ABC2428 $9.80 $14.85 Dust Cover w/ Felt, Gasket & Washer (For Delco-Remy w/ clip held cap) Fits: John Deere models thru 1963; A thru 4010, Replaces: 1900119 Distributor Dust Cover (For Delco screw held cap) fits: Late 1010, 2010, 3010, 3020, 4000, 4010, 4020, 4230, Replaces: R11264 (3.300" O.D., 1.047" tall, (2) 0.210" screw holes) NOTE: Fits ABC141, ABC420 caps. ABC488L (31/32" Bracket) $14.95 ABC488S (11/16" Bracket) $14.95 JDS3012 $20.00 NEW! Delco Distributor Bushing & Shim Kit fits: A, B, D, G, 50, 60, 70 gas series w/ Delco #1111558 distributor Replaces: 1917207, 14H774, 811912, 26H3R, 12H40C (0.486" I.D., 0.656" O.D., 1.989" length) USA made NOTE: Bushing must be sized to shaft after installation. ABC3007 $22.95 NEW! Delco Distributor Shaft Bushing & Shim Kit fits: M, 40, 320, thru 720, 330 thru 730, (50, 60, 70 LP w/1111418 distributor), Early 1010, 2010, 3010, 3020, 4010 (w/clip held cap) to 1963 Replaces: 810074, 810078, 811912,1909003 (0.486" I.D., 0.656" O.D., 2.867" length) USA made NOTE: See website for all applications. ABC2523 $6.95 Distributor Hold Down Clamp (For 3/8" hold down bolt) Fits: A, B, D, G, H series, 50 thru 730, 3010 thru 4020 (All w/ Delco distributor) Replaces: A4157R NOTE: 2 used per engine; Sold individually. IHS2531 $6.95 Distributor Hold Down Clamp (For 5/16" hold down bolt) Serviceable for M, MC, MI, MT, 40, 320, 330, 420, 430, 440, 1010, 2010, 40 Combine, 45 Combine, Will replace M415T NOTE: 2 used per engine; Sold individually. Caps, parts JDS513 $26.50 JDS587 $16.95 JDS585 $16.95 ABC276 $9.50 ABC141 $10.95 ABC330 $11.35 376 Description / Application Distributor Cap (For Delco Distributor w/ screw held cap) Fits: Late 4010, 4000, 4020, 4230 Replaces: R11271, Delco 1960810 Dust Covers ABC186 Price $9.45 Horizontal Distributor Cap (For Delco Distributor w/ clip held cap) Fits: A, B, D, G, 50, 60, 70 gas Replaces: 1913739, Delco D321 Distributor Cap (For Delco Distributor w/ clip held cap) fits: M, MC, MT, 40, 70 Propane, 320, 330, 420, 430, 440 Replaces: 1909008 Distributor Cap (For Delco Distributor w/ clip held cap) fits: 520, 530, 620, 630, 720, 730, Replaces: 1935038 Clamps Distributor Cap (For EARLY Delco Distributor w/ clip held cap thru 1963) Fits: JD 4-cyl. models; 1010, 2010, 3010 Combines: 40, 45, Replaces: Delco 811735 Distributor Cap (For LATE Delco Distributor w/ screw held cap) Fits: JD 4-cyl. models (1963 & up), 1010, 2010, 3010, 3020 Replaces: R11257, Delco 1960833 Distributor Cap (6-cyl) For EARLY Delco Distributor w/ clip held cap Fits: JD 6-cyl. models, Early 4010, Combines: 55 Replaces: Delco 824735 Distributor Cap Spring Clip (For Delco Distributor w/ clip held cap) Fits: A, B, G, H, M, MC, MT, 40, 50, 60, 70, 420, 430, 440, 520, 530, 620, 630, 720, 730, Early: 1010, 2010, 3010, 4010 (thru 1963) Replaces: 1889967, 1889999 (bracket) (2-1/4" o/a length) Gasket ABC556 $2.50 Distributor Mounting Gasket (For 90° Delco Distributor) Fits: XH477B, XH1042 & Wico "X" series magnetos, Replaces: A5272R USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price Ignition parts cont... Description / Application Order # $14.45 ABC514 (12-volt) $14.45 JDS1553 $34.95 ACS228 $15.95 ABC326 $19.85 ABC2863 $19.85 Tailored Spark Plug Wiring Set Fits: H series, Replaces: AA655R, AA1890R, AA6142R, AH655R USA made NOTE: Copper Core. One end is preassembled. JDS390 $5.95 Tailored Spark Plug Wiring Set Fits: M, 40 series Replaces: AM374T, AM3055T (14" long coil wire, 11" long plug wire) USA made NOTE: Copper core. Original pre assembled cotton covered wire w/ straight steel terminals. Check plug specifications as some models may use more than one type. Distributor Tag w/ (2) Rivets (For Delco Remy Distributor) Fits: Tractors & Industrial w/ raised letters (2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers. JDS1559 JDS1561 JDS1564 $34.95 $36.95 $24.95 $24.95 MFS106 $25.50 JDS643 $13.75 Tailored Spark Plug Wiring Set Fits: A, G series except GP Replaces: AA1222R, AA1890R, AB830R USA made NOTE: Copper core. Original (one end is preassembled) cotton covered wire w/ Rajah terminals. Tailored Spark Plug Wiring Set Fits: B series, Replaces: AA1222R, AA1890R, AB3480R USA made NOTE: Copper core. Original (one end is preassembled) cotton covered wire w/ Rajah terminals. Tailored Spark Plug Wiring Set Fits the following w/out power steering: 320, 330, 420, 430, 440 series Replaces: AM374T, AM3055T (15-3/4" long coil wire, 11" long plug wire) USA made NOTE: Copper core. Pre assembled waterproof neoprene w/ straight steel terminals. Spark Plug Wiring Set w/ Straight Boots Fits: 2-cyl. Dubuque tractors & 4-cyl models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion; Waterproof neoprene. Cut to length. Spark Plug Wiring Set w/ 90° Boots Fits: 6-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. NEW! Spark Plug Wiring Set w/ Straight Boots fits: 6-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. Spark Plug Wire Holder Fits: A, B, G, 50, 60, 70 Replaces: A470R Spark Plugs (Autolite) ABC169 $7.20 Fits the following w/ 7/8" x 18 thread: A series up to SN: 487999, AI up to SN:259999, (AR, AO up to SN: 259999), B series up to SN: 95999, (BR, BO SN: 325000 & up), BI SN: 326016 - 332250, D series SN: 109944 & up, G series up to SN: 12999, L (all) ABC169 SPECIFICATIONS: 7/8" thread, 5/8" reach, 15/16" hex, Autolite #3076, Plug Gap .030 ABC170 Spark Plug Wiring Set w/ Straight Boots Fits: 1020, 1520, 300, 301, 302, 380 Forklift USA made NOTE: These wires have a high temperature silicon core. Premium quality - no cutting or fitting required. Spark Plug Wiring Set w/ 90° Boots Fits: 2-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion; Waterproof neoprene. Cut to length. Spark Plug Wiring Set w/ 90° Boots Fits: 4-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion; Waterproof neoprene. Cut to length. $4.25 Fits the following w/ 18 MM thread: A series SN: 488000 & up, (AR, AO SN:260000 & up), B SN: 96000 & up, G SN:13000 & up, All H (Plug Gap .030); Fits: "R" Pony engine, 50, 60, 70, 520, 530,620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4230 Fits: "R" Pony engine, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4230 ABC170 SPECIFICATIONS: 18 mm thread, 1/2" reach, 7/8" hex, Autolite #386, Plug Gap .025 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Ignition parts continue on next page 377 Electrical parts $12.50 John Deere FDS149 Spark Plug Wiring Sets, parts JDS1556 Description / Application Spark Plug Wiring Sets, parts cont... Distributor Tags ABC511 (6-volt) Price All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Ignition parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Ignition parts cont... Order # Price Description / Application Order # Price Spark Plugs (Autolite) cont... Check plug specifications as some models may use more than one type. ABC171 $5.20 Fits the following w/ 18 mm threads: (For light service) A SN: 488000 & up,(AR, AO SN: 260000 & up), B SN: 96000 & up, H, 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces: AA6330, AR14017R ABC171 SPECIFICATIONS: 18 mm thread, 1/2" reach, 7/8" hex, Autolite #388, Plug Gap .030 ABC322 $3.45 ABC168 $4.25 Ignition Tune-Up Kits cont... $9.10 Ignition Tune-Up Kit (For Delco-Remy Systems w/ screw held cap) Fits: Late 1010, 2010, 3010, 3020, 4000, 4010, 4020, 4230, Replaces: AR31814, AR4864, AT14468, R11260 USA made NOTE: Kit contains: Heavy duty point set, vibration resistant condenser & rotor; Point Gap .025. ABC520 $3.95 Rotor Button (For Delco Distributors w/ clip held cap) fits: A, B, G & M series; 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010 Replaces: 1905590 Rotor Button Fits the following w/ 14 MM thread: LA, LI, M, MC, MI, MT, 40, 320, 330, 420, 430, 440, 1010, 2010 Fits the following w/ 14 MM thread: 70D, 80, 720D, 730D, 820, 830, 840 (All w/ Pony engines) Distributor, Parts JDS103 $310.60 Complete Pony "Wico" Distributor (O.E.M) w/ coils, points, wires & AF2143R resistor for combo switch Fits: 70D, 720D, 730D, 80, 820, 830 (All w/ Pony start), Replaces: AR1370R USA made ABC168 SPECIFICATIONS: 14 mm thread, 7/16" reach, 13/16" hex, Autolite #295, Plug Gap .025 Ignition Tune-Up Kits Contain: Points, Condensor (Rotor & Spark plugs - where noted) John Deere $10.75 JDS267 JDS268 JDS266 378 $24.95 $16.45 $15.75 Description / Application ABC333 ABC322 SPECIFICATIONS: 14 mm thread, 7/16" reach, 13/16" hex, Autolite #216, Plug Gap .025 ABC018 Electrical parts Ignition parts cont... Ignition Tune-Up Kit (For Delco Distributors w/ clip held cap thru 1963) Fits: A, B, G, M series; 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010 NOTE: Kit contains: Points, condenser & rotor. Point Gap .020. Ignition Tune-Up Kit (For Delco Distributor) fits: A series up to SN: 487999, (AR, AO up to SN: 259999), AI up to SN: 259999, B series up to SN: 95999, BR, BO, (BI SN: 326016 -332250), G series up to SN: 12999 NOTE: Using 7/8" - 18 thread, 5/8" reach,15/16" hex spark plug #: Autolite 3076. Kit contains: Rotor, points, condenser & spark plugs. Spark plug gap .030; Point gap .020 Ignition Tune-Up Kit (For Delco Distributor) fits: A series SN: 488000 & up, B series SN: 96000 & up, G series SN: 13000 & up, 50, 60, 70, 520, 530, 620, 630, 720, 730 NOTE: Using 18 mm, 1/2" reach, 7/8" hex spark plug, spark plug #: Autolite 386. Kit contains: Rotor, points, condenser & spark plugs. Spark Plug Gap (.030 - A thru H), (.025 - 50 thru 730); Point Gap .020. Ignition Tune-Up Kit fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 440 NOTE: Using 14 mm, 7/16" reach, 13/16 hex spark plug, spark plug #: Autolite 216. Kit contains: Rotor, Points, Condenser & Spark plugs; Spark Plug Gap .025, Point Gap .020 The following (4) parts (Sold separately) will fit the JDS103: JDS125 JDS126 JDS085 JDS232 JDS125 $26.80 EACH Points, Replaces: X9021 USA made NOTE: Point Gap .020, 2 required per tractor; Sold individually. JDS126 $15.65 EACH Condenser, Replaces: X9263 USA made NOTE: 2 required per tractor; Sold individually. JDS085 $59.95 EACH Coil, Replaces: X9295 NOTE: 2 required; Sold individually. JDS232 $27.15 Wire Set (2 short & 2 long) Replaces: AR12004, AR12005 USA made NOTE: Sold as set only. Cut spade off & slide in coils The following (4) parts (Sold separately) will fit the WICO X, XH & XB4001L series Distributors: FXH2100B XHGK FXH2102-2 FXH1108 FXH2100B $22.45 Points USA made NOTE: Will not fit 4001B distributors, Point Gap .015. XHGK $4.05 Wico End Cap Gasket, Replaces: 5618, 5644 USA made FXH2102-2 $42.75 Cap w/ Gasket (2-cyl.) Replaces: X5643, 5618, 5644 USA made NOTE: Will not fit 4001B distributors. FXH1108 $16.10 Rotor (2 Ear-Style) (2-cyl.) Replaces: X5617 USA made NOTE: Will not fit 4001B distributors. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Magnetos, parts - USA made XH1042 MAG6 Price $414.50 $424.95 Description / Application Complete Magneto fits: A up to SN: 487999, AI, (AO SN: 251486 - 253520), AR SN: 251486 - 258799, B up to SN: 89999, BI SN: 325600 - 331499, (BO, BR up to SN: 331499), G up to SN:13000, D SN: 130700 & up, W, WSP (Long prong - 5/8" from drive to end of lug) Complete Magneto fits: A SN: 488000 & up, AO SN: 260000 & up, AR SN: 250000251485 & SN: 258800 & up, B SN: 90000 & up, BI SN: 331500 & up, (BO & BR SN:3315009 & up), H, (G SN: 13000 & up), 50, 60 (Short prong - 1/4" from drive to end of lug) $14.50 Instructions & Parts List (1959) WICO XH, XHD Magneto Service FXH2024 FXH2403 XHGK FXH2102-2 FWM1256S FXH2724S FXH2603 FXC23002A FXH2408 ABC556 CGK FXC2102 JDS1180 The following parts (Sold separately) fit John Deere 2-cyl. models w/ WICO Model C Magneto: Order # Price FWM1256S $22.95 Points, Replaces: X3343 NOTE: Point Gap .015. Description FXH2724S $20.60 Condenser, Replaces: X1413 FXH2603 $85.65 Coil, Replaces: AR12011R, X2766 CGK $3.25 Cap Gasket, Replaces: X2504 FXC2102 $53.30 Cap, Replaces: X2938 NOTE: Will not fit L or LA. FXC23002A $77.50 Cover, Replaces: X2798 FXH2408 $12.80 Rotor, Replaces: 16-X477B ABC556 $2.50 Magneto Mounting Gasket, Replaces: A5272R JDS1180 $7.95 Magneto Gasket Set John Deere FXH2100B All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Order # XH477B WICO "C" magneto parts - USA made WICO "X" magneto parts - USA made FXH1108 ABC556 XH477B / XH1042 / WICO "X" series magneto parts FXH2100B FXH2024 FXH2403 XHGK Electrical parts (For John Deere R w/ Pony engine) FXH2102-2 The following USA made parts will fit the XH477B, XH1042 & WICO "X" series Magnetos: Order # FXH2100B Price $22.45 FXH1108 Description ABC556 Points, Replaces: X5996 NOTE: Also fits LA w/ WICO XH909. WICO XH3001. Point Gap .015. The following parts (Sold separately) fit John Deere "R" Wico Order # Price FXH2100B $22.45 Points, Replaces: X5996 NOTE: Point Gap .015. FXH2024 $15.25 Condenser, Replaces: X5614 FXH2403 $57.50 Coil, Replaces: AR12006R, X5700 XHGK $4.05 Wico Magneto Cap Gasket Replaces: X5618, X5644 FXH2102-2 $42.75 Cap w/ Gasket (2-cyl.) Replaces: X5618, X5643, X5644 FXH1108 $16.10 Rotor (2-cyl.), Replaces: X5617 ABC556 $2.50 Magneto Mounting Gasket Replaces: A5272R FXH2024 $15.25 Condenser, Replaces: X5614 NOTE: Also fits LA w/ WICO XH909, WICO XH3001. FXH2403 $57.50 Coil, Replaces: AR12006R, X5700 XHGK $4.05 Wico Magneto Cap Gasket Replaces: X5618, X5644 FXH2102-2 $42.75 Cap w/ Gasket (2-cyl.) Replaces: X5618, X5643, X5644 FXH1108 $16.10 Rotor (2-cyl.), Replaces: X5617 ABC556 $2.50 Magneto Mounting Gasket Replaces: A5272R Magneto w/ Pony engine: STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description 379 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Electrical parts Spark plug covers, part Order # Price JDS095L (LH) $34.95 JDS095R (RH) $34.95 Description / Application Order # Price JDS095R JDS548 (LH) $34.95 JDS550 (RH) $34.95 JDS548 JDS550 JDS552 (LH) $34.95 JDS554 (RH) $34.95 ABC1366 $34.95 12-volt Starter Solenoid (4 Terminal) (For 30, 35 MT series Delco starters) Fits: Late 620 Orchard, 630, 730 gas, LP; Will fit the following diesels: 3020 SN: 123000 & up, 4000, 4020 SN: 201000 & up, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 7020, 8430, 8630 (All w/ Delco starter 1113391, 1113672, 1113402) Replaces: AR11049, AR11050,AT11593, R11292 ABC1179 $20.75 12-volt Starter Solenoid (3 Terminal) (For Delco starters) fits: 1010, 2010 gas, diesel; The following w/ starter 1107871: 820 3-cyl., 830 3-cyl., 1020, 1520, 1530, 2020, 2030 gas, diesel, 2040 diesel, (2510, 2520 gas, diesel), 2630, 3010 gas, LP, 3020 gas, diesel w/ 12-volt Delco, 4000, 4010, 4020 gas, LP, (4030, 4230 gas); Industrials w/ starter 1107871: 300B, 301, 302, 310, 350B, 380, 400, 401, 410, 450, 480 Replaces: AR68304, R11240, 1114256, 1114356 ABC138 $29.95 ABC508 $5.35 ABC506 $5.30 ABC547 $41.10 Spark Plug Cover Fits: Early 50 up to SN: 5018449, 60 up to SN: 6035399, 70 up to SN: 7012349 JDS548 Replaces: A4589R JDS550 Replaces: A4588R Spark Plug Cover w/ Grommet Fits: Late 50 SN: 5018450 & up, 60 SN: 6035400 & up, 70 SN: 7012350 & up JDS552 Replaces: A5168R JDS554 Replaces: A5167R JDS552 JDS554 JDS556 (LH) $34.95 JDS558 (RH) $34.95 Spark Plug Cover w/ Grommet Fits: 520, 530, 620, 630, 720, 730 JDS556 Replaces: F2630R JDS558 Replaces: F2631R JDS556 JDS558 JDS567 $1.15 Description / Application Starter Solenoid Relay Assemblies Spark Plug Cover w/ Grommet Fits: H JDS095L Replaces: H685R JDS095R Replaces: H684R JDS095L 380 Starter parts 12-volt Solenoid Switch (3 Post Saddle Mount) Fits: John Deere models Replaces: DR1467 NOTE: 12-volt systems only. Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 18 NC starter terminals) NOTE: Brass. Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 24 NF starter terminals) NOTE: Brass. Starter Drives, parts Starter Drive (Bendix) fits: A series SN: 410000 - 502231 w/ starter 0760, 1108908, B series SN: 96000 - 200999,(BO, BR SN: 325000 & up), Replaces: 1850844 NOTE: Original spring style. 10 teeth. Rubber Grommet (For Hole in Spark Plug Cover) fits: H series, 50, 60, 70, 520, 530, 620, 630, 720, 730); (For Fuel Tank Pad) Fits: M, MT, MC, MI; (For Electric Wire Grommet) Fits: R, 1530, 2240, 2440, 2510, 2630, 2640, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 8430, 8630, Replaces: H987R, M305T ABC287 $37.30 Starter Drive (Bendix) (NEW not Rebuilt) Fits: A SN: 502232 & up, AO, AR, G, 60 series, Replaces: 1874133; Will fit Delco Remy starters 1108914, 919, 950, 989 NOTE: 10 teeth. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price Starter parts cont... Description / Application Starter Drives, parts cont... ABC458 ABC507 $39.50 Original Spring Style Starter Drive (Bendix) fits: L series, M series, 40, to 440 gas (All w/ starter 1107036, 1107064, 1107127, 1007165, 1107200, 1108072, 1108099) NOTE: Original spring style. 10 teeth. $23.95 Starter Drive Spring only (For ABC458 Starter Drive) Replaces: 1860639 IHS132 $44.95 ABC1435 $17.95 $17.95 JDS498 $14.95 ABC517 (Black) $14.45 Starter Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Starter Housing) Fits: B series SN: 96000 & up, M series, 40, 50, 320, 330, 420, 430, 435, 440, 520, 1010 diesel w/ starter 1108672, 2010 diesel w/ starter 1108672, 1107573, 4010 LP w/ starter 1107578, Replaces: AR11066R, 1886923 (1-3/16" wide) USA made NOTE: Stainless steel. Starter Commutator (Brush) Band Cover (For 3-3/4" O.D. Delco starter housing) Fits: H w/ Delco Starter # 1109600 Replaces: 1887889 USA made NOTE: Stainless steel. Starter Opening Cover Fits: B SN: 201000 & up, 50 Replaces: B2483R USA made Description / Application Starter Drives, parts cont... ABC511 (Black $14.45 6-volt) ABC514 (Red 12-volt) $14.45 JDS1341 (Orange 24-volt) $14.45 Starter Tag w/ (2) Rivet Fits: Tractors & Industrial using Delco Remy starter (2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers. Starter Tag w/ (2) Rivet Fits: 720D, 730D, 830, 840, 3010, 3020,4010, 4020, 5010 (All electric start diesels w/ 24-volt Delco Remy starter) (2.5" long, .800" wide, .150" dia. rivet holes, 2" c.c. rivet holes) USA made NOTE: Orange, anodized aluminum. Customer must stamp numbers. Push Button Switches, parts JDS1625 $19.95 Starter Rod Bushing Fits: B SN: 201000 & up, 50, 520 USA made NOTE: Mounts on top of flywheel cover. ABC019 $9.55 JDS930 $17.50 ABC012 $11.95 JDS1206 $13.95 Starter Tag w/ (2) Rivet Fits: Tractors & Industrial using Autolite starte (2.955" long, .915" wide, .140" dia. rivet holes, 2.650" c.c. rivet holes) USA made NOTE: Black, Anodized aluminum. Customer must stamp numbers. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Starter Switch Fits: A SN: 502232 & up, (AO,AR SN: 272000 & up), B SN: 201000 & up, G, R, (50 up to SN: 5021479), 60, 70 except LP Replaces: 820052 Starter Switch w/ Side Screw Terminal Fits: 50 SN: 5021480 & up, (60, 70 Propane only), 70 diesel up to SN: 7031299, 520, 620, 720; Fits Starters; 1107188, 1107634, 1113004, 1113005, 1113041, 1113304 Replaces: AR11006R, AR11115R, 1928209, 1934779, Delco 1930496, 1930505, D906 Starter Switch Fits: A up to SN: 502231, (AO, AR up to SN: 272000), B up to SN: 200999, H, L, LA, M, MC, MI, MT, 40, 320, 330, 420, 430, 440 gas, Replaces: 1882323, AT21265 Starting Switch Pedal Lever Fits: A SN: 477000 - 502231, B SN: 96000 -200999, H SN: 27000 & up (All w/ exposed top mount starter) Replaces: A2621R USA made Starter parts continue on next page 381 Electrical parts ABC1939 $17.95 Starter Commutator (Brush) Band Cover (For 5" O.D. Delco starter housing) Fits: A SN: 477000 & up, G w/ 12-volt starter 1108919, 60, 70 gas, 620, 630, 720 gas, 730 gas, Replaces: 1880355, 1889664 (1-3/4" wide) USA made NOTE: Stainless steel. Price John Deere ABC1203 Starter Drive (Bendix) Fits: L series, M series, 40 to 440 gas (All w/ starter 1107036, 1107064, 1107127, 1007165, 1107200, 1108072, 1108099) NOTE: Improved positive ratchet style drive. 10 teeth. Order # All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Starter parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Electrical parts Starter parts cont... Order # Price Starter parts cont... Description / Application Order # Push Button Switches, parts cont... JDS1213 Price $13.95 JDS980 $49.95 JDS875 $74.75 JDS667 $28.30 JDS1467 $58.95 JDS668 $5.60 JDS669 $1.10 JDS893 $7.50 Starting Switch Lever Fits: M, MC, MI, MT Replaces: M379T USA made JDS919 ABC2935 ABC233 $15.95 $13.95 $12.50 Starting Switch Lever Fits: 40, 320, 330, 420, 430, 440 gas Replaces: M1863T (3-3/8" o/a length) USA made NEW! 3 Terminal Push Button Starter Switch w/ Rubber Cap fits: 530, 630, 730 gas, LP, (80, 720, 730, 820 2-cyl., 830D 2-cyl. w/ Pony start ), Replaces: AR1324R, AR20431, AR21823 (5/8-32" thread O.D., 3 screw terminals) Universal 2-Terminal Starter Switch, Extra heavy duty momentary push button switch fits: Ag & Light Industrial equipment; Also fits 940 - 9630T as a Horn or ether switch, Replaces: R39554 (Mounting stem 5/8" - 32 thread, 21/32" long) NOTE: Depress button: ON; Spring return: OFF. Two screw type terminal. Up to 35 V (DC), rubber cap for dust and moisture protection. Mounting stem Push / Pull Switch ABC489 $14.50 ABC398 $8.20 Magneto Push Pull Ignition Switch (O.E.M) fits: John Deere models w/ Magneto Ignition NOTE: One screw type terminal; Out: ON; In: OFF. Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment (10-24 knob thread) NOTE: 30 AMP, 3/8" dia.thread, two screw type terminals, nonfused. This can be used on battery ignition systems only. Combination (Starter & Light) Switches, parts JDS770 382 $38.95 Combination Switch w/out Lever Fits: 50 gas SN: 5021480 & up, (50 LP SN: 5024000 & up), 60 gas & LP SN: 6026000 & up, (60 Standard gas, LP SN: 6043000 & up), 70 LP, 70 Standard LP, 520, 620, 620 Orchard up to SN: 6222999, 720 gas, Allfuel, LP, Replaces: AA5397R NOTE: Six screw type terminals. Combination Switch (O.E.M.) Fits: (70, 720 w/ diesel Pony start), (80, 820 w/ Pony start) Replaces: AF3065R, AF2460R Combination Switch w/out Lever Fits: 530, 630, 730 Replaces: AR20430 NOTE: Six spade terminals. Will not work on diesels. Combination Switch w/ out Lever Fits the following w/ electric start: 720D, 730D, 840 (All w/ 4 lights) Replaces: AR20444 NOTE: Eight spade terminals, 24-volt. Combination Switch Lever w/ Hardware(For JDS666, JDS667) fits: M, 40, 50, 60, 70, 80, 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, (820, 830 2-cyl.), 1020, 1520, 2020, 8430, 8630 Replaces: A4653R, 1902694 USA made Mounting Nut (For JDS666, JDS667) Replaces: A4655, 1902692 (Mounting thread 1/2"-20, Across flats 5/8", 1/8" thick) NOTE: Plated steel. Starter Lever Bushing Fits: 80, 820, 830 2-cyl. Replaces: B177R (1.215" long, .750" O.D., .690" I.D.) $59.95 Combination Switch w/ Lever Fits: M series (All w/ cut-out) Replaces: AM357T, AM812T NOTE: Five screw type terminals. JDS666 Description / Application Combination (Starter & Light) Switches, parts cont... Key Switches Combination Switch w/out Lever Fits: M series (All w/ regulator), 40, (50 up to SN: 5021479), 60 up to SN: 6025999, (60 Standard gas up to SN: 6042999), 60 Orchard, 70 gas, 320, 330, 420, 430, 435, 440, 620 Orchard SN: 6223000 & up Replaces: AA5071R, AM1866T JDS763 $28.65 Ignition / Key Switch w/ 2 Keys Fits: A SN: 662874 & up, (AO, AR SN: 275533 & up), B SN: 268820 & up, G SN: 46501 & up, 80, 420, 820, 830 2-cyl. (All w/ distributor), Replaces: A4699R, AA5592R, AB4063R, AB4087R NOTE: Two screw type terminals. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price Generator parts Description / Application Key Switches cont... JDS583 JDS828 JDS825 KEY02 $32.35 $39.80 $44.80 Ignition / Key Switch (O.E.M) w/ 2 Keys Fits: 1010 gas, LP up to SN: 51039, 2010 gas, LP up to SN: 55380, 3010 gas, LP, (3020 gas, LP up to SN: 67999), 4010 gas, LP, (4020 gas, LP up to SN: 90999) Replaces: AR26528 NOTE: Six spade terminals. 3-Position (Off-On-Start) Ignition / Key Switch (O.E.M) w/ 2 Keys fits: 3010 diesel, (3020 diesel up to SN: 67999), 4010 diesel, (4020 diesel up to SN: 90999), 5010 up to SN: 7999, 8020, Replaces: AR26557 NOTE: Six spade terminals. Ignition / Key Switch (O.E.M) w/ 2 Keys Fits: 2510 gas, diesel, 3020 gas, diesel SN: 68000 - 122999, 4020 gas, diesel SN: 91000 -200999, 5010 SN: 8000 & up, 5020 up to SN: 24999, Replaces: AR39505 NOTE: Six spade terminals. $2.95 Price $19.95 ABC400 $14.85 JDS565 $7.25 NEW! Ignition / Key Switch w/ 2 Keys & Mounting Nut fits: John Deere models USA made NOTE: 2 spade terminal switch; May have to drill hole to 0.800" on some applications. ABC104 $12.15 Generator Belt Fits: A series (All SN: 477000 - 542717), B series (All SN: 60000 - 306599), G series (All SN: 13000 - 25999) Replaces: B1587R (1/2" wide x 26-3/4" long) IHS141 $11.95 Generator Belt Fits: AO, AR SN: 260000 - 271399 w/ Delco generator Replaces: A2745R (1/2" wide x 33-1/4" long) ABC1648 $15.50 ABC103 $10.50 ABC100 $11.00 JDS1972 $42.50 Generator Pulley Fits: A series SN: 477000 & up, B series SN: 60000 & up, D series SN: 35310 & up, G series, H series, early 50, 60, 70 gas Replaces: B1030R (4.500" O.D., 0.507" belt groove width, 0.670" I.D., 0.127" keyway) NOTE: Bare cast iron. See website for full applications. ABC015 $24.95 6-volt Generator Cut-Out Assembly Fits: Early A, AO, AR, B, BO, BR, D, G, H, L, LA, LI; Also Fits generator 1100506, 1100508, 1100517, 1100588, 1101356, 1101371,1101377, 1101385, 1101401 Replaces: 1116809DR, R40061, AH975R NOTE: 15 AMP. Mounting tabs are parallel w/ cut-out. JDS834 $19.20 Generator Adjusting Strap Fits: 60 SN: 6030000 & up, 520, 530, 620, 630, Replaces: A4896R (5-3/4" o/a length, 3-1/4" adjustment slot) USA made Ignition / Key Switch w/ 2 Keys Fits: Ag & Light Industrial equipment (3/4" dia. thread) NOTE: Four stud type terminals. Knob Description / Application $64.95 $12.95 Ignition / Key Switch w/ 2 Keys Fits: John Deere models NOTE: 2 wire switch; May have to drill hole to 0.800" on some applications. IHS760 Order # JDS391 Starter Knob (Plastic) Fits: M, MC, MT, 40, 320, 330, 420, 430, 440 Replaces: M2544T (1/4"-20 NF) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Generator Bracket Fits: H Replaces: H921R USA made Generator Belt Fits: A SN: 674342 & up, (AO, AR SN: 271400 & up, 60 up to SN: 6029999, 70 gas up to SN: 7008099, Replaces: A4287R, N117674 (17/32" x 45-1/4") Generator Belt Fits: BI, BO, BR Replaces: A1230R, B2922R (1/2" wide x 24-1/4" long) Generator Belt Fits: Styled L SN: L640000 & up, M series Replaces: L4201T (1/2" wide x 22" long) Generator parts continue on next page 383 Electrical parts ABC065 NOTE: Verify belt size before ordering. John Deere Ignition Key fits: A, B, G series, 80, 420, 820 2-cyl., 830 2-cyl., 1010, 2010, 2510, 3010, 3020, 4010, 4020, 5010, 5020, 8020 Replaces: A4700R All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Starter parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Electrical parts Generator parts cont... Order # ABC1207 Price $17.95 ABC519 $14.45 ABC511 (6-volt, Black) $14.45 ABC514 (12-volt, Red) $14.45 JDS1341 (24-volt, Orange) $14.45 Voltage regulators cont... Description / Application Order # Price Generator Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Generator Housing) fits: A, B, D, G, H, L, LA, M, MC, MI, MT, R, 40, (50 up to SN: 5016057), 60 up to SN: 6029999, 70 up to SN: 7008099, 420, 430, 440 gas, LP, Replaces: 1872638 (1-5/8" wide) USA made NOTE: Stainless steel. ABC188 $45.55 ABC154 $32.95 Black Generator Tag w/ 2 Rivets Fits: Tractors & Industrial using Autolite generator (2.300" long, .732" wide, .145" dia. rivet holes, 2" c.c. rivet holes) USA made NOTE: Anodized aluminum. Customer must stamp numbers. Generator Tag w/ (2) Rivets Fits: Tractors & Industrial using Delco Remy generator w/ raised letters (2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers. Generator Tag w/ (2) Rivets Fits: 720D, 730D, 830, 840, 3010, 3020, 4010, 4020, 5010 (All electric start diesels w/ 24volt Delco Remy generator) (2.5" long, .800" wide, .150" dia. rivet holes, 2" c.c. rivet holes) USA made NOTE: Anodized aluminum. Customer must stamp numbers. Order # Price Description / Application $32.95 6-volt (4-Terminal) Voltage Regulator (Saddle Mount) fits: A, AO, AR, B, BO, BR, D, H, G, L, LA, 70 diesel, 720 diesel, 730 diesel (All w/ Pony start); Fits generator 1100027, 1100506, 1100508, 1100517, 1100588, 1101356, 1101371, 1101377, 1101385, 1101390, 1101401, Replaces: Regulator 1118265, 1118305, 1118786 NOTE: Can replace tractors w/ cut-out 1116809 by using ABC188 Voltage Regulator Conversion Kit. ABC152 384 $32.95 6-volt (4-Terminal) Voltage Regulator (Base Mount) fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 440 w/ generator 1101857, 1101859, 1102102, Replaces: Replaces Regulator 1116816, 1111308, 1118780,1118955, Replaces: AM2702T, AM1863T NOTE: Must use ABC188 to replace cut-out. Voltage Regulator Conversion Kit Fits: A, AO, AR, B, BO, BR, G, H, L, LA, M, MC, MI, MT NOTE: Used w/ ABC153, ABC152 Voltage Regulators when replacing cut-outs. For generators 1101356, 371, 377, 358. 12-volt (4-Terminal) (Saddle mount) Voltage Regulator fits: A, D, G, 50, 60, (Early 70 gas/LP), Combines: 55, 95 w/ generators 1100955, 1100956, 1101777, 1101784, 1947579 Replaces: Regulator 1118266, 306, 791, 792 ABC155 $32.95 12-volt (3 Terminal) Voltage Regulator (Saddle Mount) fits: A, G, 50, 60, (70 gas, LP SN: 7008100 & up), 520, 530, 620, 630, 720, 730 gas, LP w/ generator 1100309 Replaces: Regulator 1118792 ABC185 $32.95 JDS2438 $84.20 Voltage regulators ABC153 Description / Application 12-volt (4 Terminal) Voltage Regulator (Base Mount) fits: 435, 440 diesel, 1010, 2010 except generator 1102331 Replaces: AT11855, Delco 1118779, 1118981, 1118997, 1118999, 1119191 NOTE: For 12-volt generator system. NEW! 24-volt (4-Terminal) Voltage Regulator (Base Mount) fits the following w/ 24-volt electric start diesel: 720 SN: 7222600 & up, 730, 830 2-cyl., (840 up to SN: 8400199), 3010, (3020 up to SN: 122999), 4010, (4020 up to SN: 200999), 5010, (500 up to SN: 67999), 600 up to SN: 90999 (All using Delco generator 1103021, 1103026) Replaces: AR30155 USA made Alternator, parts NOTE: Alternators are NEW not rebuilt • To convert 6-volt to 12-volt system. For negative ground systems. Not suitable for conversion on JD Dubuque series tractors: M, MT, MC, 40, 320, 330, 420, 430 Order # ABC535 Price Description / Application $149.95 Mini 41 Amp Maximum Alternator w/ Pulley & Diode fits: John Deere models requiring a smaller dia. alternator for clearance (4-1/2" housing dia., 2-1/2" pulley dia., 3/8" belt width) NOTE: For 12-volt negative ground systems only. This alternator has a built in 3-wire internal regulator that requires an excitation circuit. Includes instructions. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price ABC2315 $34.95 Light parts cont... Description / Application Order # Price JDS1009 $39.30 Front Light Bracket Fits: A series SN: 584000 & up, B series SN: 243385 & up, Replaces: A3353R (13-1/4" long) USA made NOTE: Threaded end w/ jam nut. 2 used per tractor; Sold individually. JDS1007 $39.50 Front Light Bracket Fits: 50 SN: 5002931 & up, 60 gas, LP, 60 Standard SN: 6043000 & up, 70, 720 Replaces: A4465R (10-1/8" long) USA made NOTE: Threaded end w/ jam nut. 2 used per tractor; Sold individually. JDS621 $18.75 Alternator Pulley (For ABC535) (0.587" ID, 1.437" o/a length, 3" pulley O.D., 5/8" belt width) USA made ABC418 ABC1426 $99.95 63 Amp Alternator w/ Pulley Fits: John Deere models (6-1/4" housing dia., 2-1/2" pulley dia., 5/8" belt width) NOTE: For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through amp gauge to positive side of battery! Must rev engine to 800 - 850 RPM in order for unit to self excite. ABC495 JDS804 $2.70 $34.95 $23.50 Universal Mounting Kit fits: John Deere models NOTE: Used when switching from a generator to an alternator. Does NOT include top adjusting bracket. May have to be drilled or modified for your application. JDS1286 $49.95 Universal Top Adjusting Bracket Fits: John Deere models (7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole) NOTE: Customer may need to trim to fit some models. JDS1298 $29.95 Light parts Order # Price JDS1646 $14.95 JDS1130 $7.95 Description / Application JDS1280 $34.95 JDS469 $6.95 Front Light Clamp Fits: G, Replaces: F718R USA made Front / Tail Light Clamp Fits: Styled A up to SN: 583999 w/ cast iron dash, Styled B up to SN: 200999 w/ cast iron dash, G SN: 13000 & up on rear light only, H, Replaces: A2613R (7/8" opening) USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Light Support Bracket Fits: M, MC, MI, MT, 40, 320, 420 up to SN: 139999, (440, 1010 w/out touchamatic as a rear light bracket) Replaces: M646T Set Screw w/ Hex Jam Nut (For Attaching JDS621 to JDS620) Fits: M, MC, MI, MT, 40, 320, 420 Replaces: 22H724A (screw), 14H611A (nut) (Screw = 5/16"-18 UNC x 1") Rear Light Adjusting Arm Fits: M Replaces: AM481T USA made Light Mounting Arm Fits: MT, Replaces: AM1215T USA made NOTE: Two used for headlights and one used for tail lights. Mounts into cast fender bracket and fits over fenders. Rear Light Rod Bracket Fits: MC, 40 Crawler, 420C, 430C (All w/ standard seat; No loaders) Replaces: M1406T USA made Light Bracket / Clamp Fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 435, 440, 1010, 2010 Crawler, 3010, 3020 Replaces: M1482T NOTE: Yellow zinc plated. Light parts continue on next page 385 Electrical parts $29.95 John Deere ABC529 JDS620 $19.95 Pulley only (For ABC418) (.670" shaft dia., 2-1/2" pulley O.D., 5/8" belt width) ABC404 Front Light Arm Fits: M, 40, 320, 330, 420, 430 series Replaces: M647T $19.95 Pulley only (For ABC418) (.670" shaft dia., 3-3/16" pulley O.D., 1/2" belt width) Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Alternator, parts cont... Order # Price JDS1295 $79.95 Electrical parts Light switches, parts Description / Application Order # Price ACS139 $39.95 3-Position Switch (Hi-Lo-Charge) (Hi charge w/ lights) Fits: A, B, D, G, H, L (All w/ cut-out) Replaces: AB2687R, AF687R, AF708R, AL2857T (10-32 thread) NOTE: Three screw type terminals, .800" dia. threaded stem. IHS950 $14.50 Light Switch Field Resistor Fits: A series up to SN: 517971, (AO, AR up to SN: 261847), B series up to SN: 133724, (BO, BR up to SN: 332612), D up to SN: 153988, L series, M series (All using original switch w/ cut out) Replaces: 1838155 ABC425 $4.95 LH Front Light Bracket Fits: 330, 430 Replaces: T10860T USA made NOTE: Cast. JDS1283 $112.95 JDS1290 $39.95 RH Front Light Bracket Fits: 430 up to SN: 158074 w/ power steering, Replaces: T11042T USA made NOTE: Cast. JDS1607 $24.95 JDS1649 $37.15 JDS953 $43.95 JDS947 $11.10 386 ABC367 Rear Light Arm Fits the following w/standard seat: 40H, T, W, V, 420H, I, T, V, W, 430H, I, T, V, W, 435, 440; Also Fits the following up to SN: 42000 & w/ a regular seat: 1010, RU, RS, RUS, UT, OR, Replaces: M2015T, T11341 (.625" O.D.) Rear Light Arm Fits the following models w/ toucho-matic hydraulics: 40S, 40U, 320, 330, (420S except dual touch-o-matic), 420U, (430S except dual touch-o-matic), 430U, (1010 RS up to SN: 42000 w/out dual hydraulics - single row crop) 1010 OR (Grove & Orchard), 1010 UT (Utility) Replaces: M2201T USA made Light Mounting Bracket Fits: 820 3-cyl., 830 3-cyl., 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN: 349999, 2240 up to SN: 349999, 2510, 2630; Also fits the following w/ stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030, Replaces: T12443, T19178 USA made Light Mounting (Half) Clamp (For JDS953) Fits: 1010 thru 8630 USA made NOTE: 2 required per light; Sold individually. Description / Application Knob only (Says "LIGHTS") (For ACS139 Switch) (10-32 thread) Rear Light Rod Fits: 420T, 420W, 430T, 430W (All w/ float ride seat) Replaces: T10888T USA made John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Light parts cont... $4.95 Knob only (Plain Face) (For ACS139 Switch) (10 - 32 thread) JDS631 $12.95 JDS1030 $11.95 ABC398 $8.20 JDS853 $29.50 Universal 3-Position Fused Push / Pull Starter & Light Switch fits: A, B, (D SN: 143800 - 186751), G, H, 2-cylinders w/ voltage regulator, Replaces: AF687R, AB2687R NOTE: 15 AMP, five terminals, fused, 7/16"-20 stem. 10-24 N.C. black plastic knob. Knob only Fits: A, B, D, G, H, L, LA, R Replaces: F690R (10 - 32 UNF) NOTE: Black metal. Universal 2-Position Push / Pull Light Switch fits: Ag & Light Industrial equipment (10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. 4-Position Light Switch w/out Knob Fits: 1010, 1020, 1520, 2010 & 2020 gas, LP, diesel), 3010 gas, (3020 up to SN: 67999), 4010 gas, (4020 SN: 65000 - 90999); Combines: 45 - 105, Replaces: AR28401 NOTE: Six spade terminals, 1/2" dia. threaded end. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS856 Price $28.50 JDS859 $38.50 JDS850 $11.15 JDS848 $12.75 $37.95 4-Position Light Switch w/out Knob Fits: 2510, (2520 up to SN: 22000), 3020 SN: 123000 - 150000, 4000, (4020 SN: 91000 - 250000), 4520 up to SN: 142449, 5010 SN: 8000 & up, 5020 w/out cab, 6030 w/ out cab, gas, LP, diesel, Replaces: R39551, AR41288 NOTE: Nine spade terminals, 1/2" dia. threaded end. Knob only fits: 1010, 2010, 2510, (2520 up to SN: 22000), 3010, (3020 up to SN: 150000), 4000 up to SN: 250000, 4010, (4020 up to SN: 250000), 4520 up to SN: 142449, 5010; Fits the following w/out sound guard cab: 5020 & 6030, Replaces: R27963, AT65316 (2.244" O.D.) Order # ABC336 $77.95 IHS351B (6-volt) $44.95 JDS603 (6-volt) $49.95 5-Position Light Switch w/out Knob Fits: 830 3-cyl., 920, 1040, 1140, 1530, 1640, 1830, 2030, 2040, 2040S, 2240, 2440, 2630, 2640, 2840, (3030, 3130 SN: 162948 & up), 300B Industrial gas, diesel; Fits the following w/sound guard cab: 2150, 2155, 2255, 2355, 2550, 2555, 2755, 2855, 2940, 2950, Replaces: AR66478 NOTE: 5 spade terminals, 1/2" dia. threaded end. Description / Application 6-volt Complete Headlight Assembly Fits: Early A SN: 477000 - 500011, Early B SN: 60000 - 95999, D SN: 35310 - 188057 Replaces: AB3144R, AB3145R (7" flat lens) NOTE: Zinc plated. Complete Headlight Assembly Fits: Styled A w/ cast iron dash up to IHS351B12V $44.95 SN: 583999, Styled B w/ cast iron dash (12-volt) up to SN: 200999, G, L, LA, M, MT, 40, Early 320, 420 up to SN: 100000 IHS351B Replaces: AL2855T, AM3257T IHS351B12V Replaces: AT10571T (4-3/4", 2 1/2" stud length) NOTE: Also works as a rear work light for M, MC, MT, 320. JDS606 (12-volt) 4-Position Light Switch w/out Knob Fits: 2520 SN: 22001 & up, 3020 SN: 150001 & up, 4000 SN: 250001 & up, 4020 SN: 250001 & up, 4320, (4520 SN: 142450 & up), 5020 w/ cab, 6030 w/ cab, 7020, 7520; Fits the following w/ sound guard cab: 2350, 2355, 2550, 2555, 2750, 2755, 2855, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces: AR48724 NOTE: 6 spade terminals, 1/2" dia. threaded end. Knob only fits: 2520, (2750 SN: 22001 & up), 3020 SN: 150001 & up, 4000 SN: 250001 & up, 4020 SN: 250001 & up, 4030, 4230, 4320, (4520 SN: 142450 & up), 4620, 4630; Fits the following w/ sound guard cab: 5020, 6030 Replaces: R46092, AR54445 (2.244" O.D.) Price Complete Headlight Assembly w/ Correct Stud Length & Copper $49.95 Ground Strap JDS603: Fits: Styled A w/ sheet metal dash SN: 584001 & up, AO, AR, (B w/ sheet metal dash SN: 201000 & up), D SN: 143800 & up, H, R, (70 diesel), 80, (720 diesel Pony start up to SN: 7214899), 820 Pony start up to SN: 8203099, Replaces: AA3075R JDS606: Fits: Styled A w/ sheet metal dash SN: 584001 & up, AO, AR, (B w/ sheet metal dash SN: 201000 & up), D SN: 143800 & up, H, R, 50, 60, 70, (70D, 80, when converted to 12 volt), 620 Standard up to SN: 6213099, 720 gas/LP Rowcrop & Standard up to SN: 7214899 w/ cowl mounted lights Replaces: AF710R (4-3/4" curved lens; 1-1/2" stud length) NOTE: Also can be used as a rear light for some applications. JDS468 $45.95 6-volt Sealed-Beam Headlight Assembly Fits: Late 320, 330, 420 SN: 100001 & up, 430, 440, Replaces: AT10571T (4-1/2") ABC525 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $45.95 12-volt Sealed-Beam Headlight Assembly fits: 620, 630, 720, 730, 820, 830 Replaces: AF3816R (4-1/2" dia., 1-1/8" stud length) NOTE: For 6-volt systems also order ABC462. See website for full applications & serial number breaks. Headlights, parts continue on next page 387 Electrical parts JDS842 $24.50 4-Position Light Switch w/out Knob Fits: 3010 diesel, (3020 up to SN: 122999), 4010 diesel, (4020 up to SN: 90999), (5010 up to SN: 4499), 8020 (All diesel) Replaces: AR28402 NOTE: Eight spade terminals, 1/2" dia. threaded end. Need light components? See pgs. 390 & 391 John Deere JDS844 Description / Application Headlights, parts All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Light switches, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Electrical parts Headlights, parts cont... Headlights, parts cont... Order # Need light components? See pgs. 390 & 391. Order # Price JDS676 $18.15 JDS920 $92.95 Description / Application Price Description / Application ABC3032 $21.50 NEW! Rubber Light Bezel (For Guide style light w/out glare guard) fits: Some 1010 - 5010, 820 3-cyl. - 7520, 830 3-cyl. -8630; Also fits miscellaneous Industrials Replaces: R31250 (4.960" O.D., 3.250" I.D., 1.325" wide, 4 inner slots) USA made NOTE: See website for additional applications. ABC3044 $28.50 NEW! Guide Glare Guard Rubber Light Bezel fits: Late 2140 w/ cab thru 4840 & others using guide round glare guard hooded bezel, Replaces: R54047 (5.045" O.D., 3.250" I.D., 3.900" o/a width) NOTE: See website for additional applications. Clamp Ring w/ Screw (For Sealed Beam Lights) Fits: ABC525, JDS468, JDS579, JDS580, JDS581, JDS582 Replaces: AF3891R (4-1/2" dia.) Fender Light Harness Kit (For 4-Light Flat Top Fenders) Fits: 530, 630, 730; Serviceable for 520, 620, 720 USA made NOTE: Exact of original. JDS579 (6-volt Lo-Beam) JDS580 (6-volt Hi-Beam) JDS581 (12-volt Lo-Beam) $44.95 Lo-Beam Sealed-Beam Headlight $44.95 Assembly (For Flat Top Fenders) JDS579, JDS580: Fits: 720D, 730D (Both w/ Pony start) $44.95 JDS579 Replaces: AR20446R JDS580 Replaces: AR20445R JDS582 (12-volt Hi-Beam) $44.95 IHS647 $34.95 ABC3028 388 Dash lights, parts $12.50 Order # Price Description / Application JDS495 (6-volt) $23.95 JDS499 (12-volt) $23.95 1" Dash Light w/ Bulb JDS495: Fits: AR, B, BR, Styled D, R, 70D, 80, (820 & 830 w/ Pony start) Replaces: AD1855R, AD2082R, AD2834R, AD2835R, AR1563R, AR20447R, AR26757R, B1728R JDS581, JDS582: Fits: 520, 530, 620, 630, 720, 720D, 730, 730D, Early 3010, 4010 JDS581 Replaces: AA7322R JDS582 Replaces: AR20443R (4-1/2") NOTE: Can be used on tractors equipped w/ light bars. Also a tail light (1949 & up). 12-volt Sealed Beam Headlight Assembly (For Flat Top Fenders) Fits: 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Replaces: AT13381, RE19080 NOTE: Post is out of back w/ wires thru post. NEW! Rubber Light Bezel (For 'Hobbs' style light w/out glare guard) fits: Some 1010 - 5010, 820 3-cyl. - 5020 (All w/out cabs); 830 3-cyl. - 6030 (All w/out cabs); Also fits miscellaneous Industrials Replaces: R30182 (5.250" O.D., 3.675" I.D., 1.125" wide; 3 outer tabs to attach rubber ring to light housing & 4 inner tabs to secure to sealed beam) NOTE: Fits IHS647 & ABC3154 lights. See website for additional applications. See insert A. JDS499: Fits: AR, Styled D, (820 & 830 w/ electric start), 50 up to SN: 5016122, 60 up to SN: 6017060, 70 up to SN: 7006327, (520 up to SN: 5208099), 1010, 2010, 2010 Crawler, 2510, 3010, 3020 up to SN: 122999, 4010, 4020 up to SN: 200999, 5010, 5020, 6030, 8020, Replaces: AR33479R, AR35993R, RE13195R (5/8" dia. stem) JDS588 (Black) $12.50 JDS588CH (Chrome) $12.95 JDS588 Dash Light Cover only Fits: Same as JDS495, JDS499 (1" dia.) JDS588CH JDS648V6 (6-volt) $28.95 JDS648V12 (12-volt) $28.95 1-1/4" Dash Light w/ Bulb JDS648V6: Fits: 40, 320, 330, 420, 430 Replaces: AM1879T JDS648V12: Fits: 40, (50 SN: 5016123 & up), 60 Orchard, Standard SN: 6000001 & up, 60 Row Crop SN: 6028350 & up, 70 SN: 7006328 & up, 70 Standard, 320, 330, 420, 430, 435, 440, 520 SN: 5208100 & up, 620 Orchard; Lower Dash Light for 530, 630, 730, 730D, Replaces: AB4723R, AR20432R (1-1/4" O.D. cover, 2-1/4" o/a length, 5/8" O.D. inner post, 1" post length) NOTE: When converted or originally 12 volt. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS746 Tail lights, parts cont... Price Description / Application $34.95 12-volt 1-1/4" Dash Light w/ Bulb Fits: 520 LP, 530 (Upper Dash Light), 620 except Orchard, 630 (Upper Dash Light), 720, 720D, 730, 730D (Upper Dash Light) Replaces: AF2738R, AF3139R, AR20466R, AR20251R NOTE: Need to purchase ABC344 6-volt bulb for 720D, 730D w/ Pony start. JDS589 (Black) $14.95 JDS589CH (Chrome) $15.45 JDS589 JDS589CH ABC344 (6-volt) $1.80 ABC345 (12-volt) $1.80 Order # Price $2.95 IHS473 (6-volt) $69.95 IHS455 (12-volt) $69.95 Rear Combo Light Assembly w/ Red Jewel Lens & Rotary Switch Fits: A SN: 477000 - 583999, (AR, AO w/ SN: 272000 & up), B SN: 96000 - 200999, D SN: 186752 & up, G SN: 13000 - 25999, H SN: 27000 & up (4-3/4") JDS475 (6-volt) $74.95 JDS476 (12-volt) $74.95 Combo / Red Dot Tail Light Assembly w/ Switch JDS475: Fits: B SN: 201000 & up, R Replaces: AA3075R, AA4529R, AB3975R, AB3976R, AB4037R Dash Light Cover only Fits: Same as JDS648V6, JDS648V12, JDS746, Replaces: B3267R (1-1/4" dia.) Bulb only Fits: Same as JDS495, JDS499, JDS648V6, JDS648V12, JDS746 Price $42.50 ACS264V12 (12-volt) $42.50 Tail Light (Bullet-Style) ACS264V6: Fits: B SN: 201000 & up, M, MI, MT, R, Replaces: AB3976R, AM1291T, AM1310T ACS264V12: Fits: A SN: 584000 & up, G SN: 26000 & up; Following when converted to 12 volt: B SN: 201000 & up, M, MI, MT, R, Replaces: AA4530R NOTE: Restoration quality. ABC1979 $49.95 JDS319V12 (12-volt) $49.95 JDS318V6 (6-volt) $59.95 Combo / Red Dot Tail Light Assembly w/out Switch fits: 70 diesel, 80, 720 diesel, 730 diesel, 820, 830 2-cyl. (All w/ 6-volt Pony engine start) Replaces: AF2082R, AF3088R (4-3/4") NOTE: Back post. Installs on back of seat or battery box. Must have switch on dash. JDS318V12 (12-volt) $59.95 Combo / Red Dot Tail Light Assembly w/out Switch fits: 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 2-cylinders, 3010 up to SN: 19799, 4010 up to SN: 22908, Replaces: AA5199R, AA6733R, AR21735R (4-3/4") NOTE: Back post. Installs on back of seat or battery box. Must have switch on dash. $20.75 Red Tail Light Lens (Plastic) w/ Guide Name fits: 2010 Utility, 3010 Utility & (3020 Utility up to SN: 67999); Lawn & Garden: 110, 112; Industrial: 500 up to SN: 67999 (2-9/16" O.D.) USA made NOTE: Fits light #AT11883. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Tail / Work Light Assembly JDS319V6: Fits: B SN: 201000 & up, R Replaces: AB3549R JDS319V12: Fits: A SN: 584000 & up, B SN: 201000 & up when converted to 12-volt, G SN: 26000 & up, R when converted to 12-volt, Replaces: AA3867R (4-3/4") NOTE: Back post. Installs on back of seat or battery box $1.45 Base Gasket (For Bullet Tail Light) Fits: Same as ACS264V6, ACS264V12 ACS220 JDS319V6 (6-volt) Tail lights, parts continue on next page 389 Electrical parts ACS264V6 (6-volt) Description / Application John Deere Order # Gasket fits: Same as ACS220 Replaces: T15271 (2-9/16" O.D.) USA made JDS476: Fits: A SN: 584000 & up, G SN: 26000 & up; Following when converted to 12 volt: B SN: 201000 & up, R Replaces: AA3075R, AA4529R, AB3975R, AB3976R, AB4037R (4-3/4") NOTE: Back post. Installs on back of battery box or seat. Tail lights, parts Need light components? See pgs. 390 & 391. Description / Application ACS245 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Dash lights, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Tail lights, parts cont... Order # Need light components? See pgs. 390 & 391. Order # Price JDS466 (6-volt) $58.95 JDS467 (12-volt) $58.95 ABC3154 ABC548 John Deere IHS899 Electrical parts Light components $34.95 $9.95 $19.95 Rear view ABC544 ABC1439 $17.15 ABC307 $19.95 Flat Lens ABC312 $16.50 Ring ABC347 $7.95 ABC350 $13.90 Reflector (Uses IHS354 & IHS436 bulbs) JDS467: fits: 40, 320, 330, 420, 430 all when converted to 12 volt; 435 (all), 440 (all), Replaces: AT11352T (4-3/4") NOTE: Must have switch on dash. IHS354 $3.00 6-volt Bulb (For ABC350/aftermarket lights) IHS436 $2.95 12-volt Bulb (For ABC350/aftermarket lights) NEW! 'Hobbs' Rear Combo Light Fits: Tractors & equipment using rear 12-volt combo light w/ stud post out back & dash mounted light switch USA made NOTE: New old stock, paint is blemished. 12-volt Round Tail Light Assembly w/ License Lamp Window, red lens & black ABS base Fits: John Deere models (4" dia.; 2 stud mount, 1-7/8" c.c. studs) 12-volt Sealed-Beam Combination Rear Light Bulb w/ transparent red background using separate bulb Fits: John Deere models w/ combination tail light, 12-volt bulb (4409) (4-1/2") 12-volt Fender & Cab Warning Light w/ 2 amber lenses, double contact bulb & black die cast base Serviceable for 820 3-cylinder thru 8850 (All using round warning light) Replaces: AA34967, AR38456, AT22066, AT23467 (4" dia.) $3.45 ABC1243 $26.50 12-volt Fender & Cab Warning Light w/ 1 amber lens, 1 red lens, amber side marker, single contact bulb & black ABS base Fits: John Deere models (All using rectangle warning light) $4.95 Amber Lens only (For ABC546) 390 Description Combo / Red Dot Tail Light Assembly w/out Switch JDS466: Fits: 40, 320, 330, 420, 430 Replaces: AT10569T 6-volt Bulb only (For ABC458 & ABC544) ABC546 Price The light components below fit ABC336: Description / Application Gasket OEM lights use the following (4) bulbs. Check bulb prior to ordering: OLS068 OLS075 ABC358 ABC359 Bottom view OLS068 $4.95 OEM 6-volt Bulb w/ Ring, Single Contact OLS075 $9.95 OEM 12-volt Bulb w/ Ring, Single Contact ABC358 $7.95 OEM 6-volt Bulb w/ Ring, Double Contact ABC359 $10.95 OEM 12-volt Bulb w/ Ring, Double Contact IHS475 $6.00 Light Terminal The light components below fit IHS351B, IHS351B12V, JDS603, JDS606, IHS473, IHS455, JDS475, JDS476, JDS319V6, JDS319V12, JDS318V6, JDS318V12, JDS466, JDS467: IHS475 $6.00 IHS352 $14.50 Lens (Dimpled Outer Surface) w/ Guide Name ABC388 $14.50 Lens (Smooth Outer Surface) w/ Guide Name IHS353B $14.45 Black Ring ABC560 $4.10 Seamless Gasket IHS355 $3.85 Gasket IHS354 $3.00 6-volt Bulb IHS436 $2.95 12-volt Bulb ABC320 $10.95 Reflector (For Head & Work Lights) ABC378 $19.95 Reflector (For Tail Lights w/ Red Jewel Lens & 12-volt Bulb in Jewel Lens) IHS474 $14.95 Jewel Lens w/ Base & 6-volt Bulb ABC1115 $14.95 Jewel Lens w/ Base & 12-volt Bulb ABC342 $1.80 Light Bulb (For 6-volt Jewel Lens) ABC343 $1.80 Light Bulb (For 12-volt Jewel Lens) ABC541 $18.70 Combo Light Switch w/ Lever Style Knob ABC536 $6.50 Light Terminal Lever style Plastic Knob The light components below fit ABC525, IHS647, JDS468, JDS579, JDS580, JDS581, JDS582 JDS676 $18.15 Clamp Ring w/ Screw (except for IHS647) ABC3028 $12.50 NEW! Hobbs Rubber Light Bezel (Fits IHS647 only) NOTE: See insert A, ABC527 $5.95 Concaved Mounting Washer ABC352 $7.65 6-volt Sealed Lo-Beam Bulb 4511 ABC353 $7.50 12-volt Sealed Lo-Beam Bulb 4411 ABC462 $16.50 6-volt Sealed Hi-Beam Bulb 4510 ABC460 $16.50 12-volt Sealed Hi-Beam Bulb 4410 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm ACS123 $14.95 Lens OLS071 $9.95 Trim Ring OLS072 $2.00 Gasket ABC1979 $1.45 Base Gasket (For Bullet Tail Light) ABC344 $1.80 6-volt Bulb ABC345 $1.80 12-volt Bulb Emblems cont... Order # Price JDS748 $29.95 Description / Application Hood Ornament Fits: 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Replaces: AR28047 NOTE: Chrome. Includes retaining screws. Emblems NOTE: Clean out peg mounting holes w/ hand held drill bit JDS896 $29.75 before installing. Pegs can be damaged if emblem is forced onto hood w/ rust or heavy paint in the peg holes. Order # Price Description / Application Front Emblems / Medallions $48.95 Front Medallion Fits: Styled AR, AO, (R up to SN: 18912) Replaces: AR642R (Measures 3-7/8" across) USA made NOTE: Installs w/ double adhesive tape (included). JDS138 $38.50 Front Grille Nameplate (John Deere) Fits: R SN: 18913 & up, 40, 50, 60, 70, 80, Early 420 up to SN: 100000 Replaces: AA5383R (6" L x 1" H, 4" c.c.) USA made NOTE: Includes retaining clips. JDS3116 JDS198 JDS290 $92.50 $87.50 $39.95 JDS307 $250.00 NEW! Front Medallion Fits: 320, (420 SN: 100001 & up), 520 Replaces: AM3434T (4 1/16" W, x 2 3/4" H) USA made NOTE: Includes retaining clips. Front Medallion Fits: 620, 720, 820 Replaces: AB5236, AF3261 (4-1/2" W x 3-1/4" H) USA made NOTE: Includes retaining clips. Front Medallion Fits: 330, 430, 435, 530 Replaces: AR20467, AR21111R (5" W x 3-3/8" H) USA made NOTE: Includes retaining clips. Side Molding Pair w/ Raised Letters Fits: 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, Replaces: AR28048, AR28049 USA made NOTE: Sold as LH / RH pair. Includes retaining clips. Clean out peg mounting holes w/ a hand held drill bit, etc. before trying to install emblem as pegs can be damaged if forced onto hood w/ rust or heavy paint in the peg holes. Push Clip JDS630 $0.45 EACH Push Clip only (For JDS138 Nameplate, JDS198, JDS288, JDS290 Medallions, JDS307 Side Molding Pair, Replaces: A4679R NOTE: Push clips are included w/ listed nameplate, medallions & moldings. Miscellaneous JDS2240 Front Medallion Fits: 630, 730, 830, (840 up to SN: 8400199) Replaces: AR21112 (5-3/4" W x 4-1/8" H) USA made NOTE: Includes retaining clips. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $48.50 Identification Plate (Emblem) Fits: 500A SN: 123114 & up, 500C, 510, 600, 2520, (3020 SN: 123000 & up), 4000, (4020 SN: 201000 & up), 4320, 4520, 4620, 7020, 7520, Replaces: AR45440 (3.709" o/a length (includes .488" wide locating tab), 3.380" exposed length) USA made NOTE: Mounts on instrument panel w/ double sided tape. 391 Electrical / Chassis parts JDS288 $92.50 Side Emblems John Deere JDS522 Hood Ornament Fits: 2040 SN: 350000 & up, 2150, 2155, 2255, 2350, 2355, (2440 SN: 341000 & up), 2550, 2555, (2640 SN: 341000 & up), 2750, 2755, 2855, 2940, 2950, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4550, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 Replaces: L40919, R73259, R50736 NOTE: Chromed metal. Includes retaining screws. All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. The light components below fit ACS264V6, ACS264V12: All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Be-careful plates - USA made Starter hand cranks - USA made Fits: John Deere models Order by year range JDS312 Order # JDS313 Description JDS314 Order # Price JDS1363 $48.15 Steering Wheel Starter Crank JDS1054 $64.95 Starter Hand Crank w/ Pin & Spinner JDS1308 $68.50 Starter Hand Crank w/ Original-style Fits: A SN: 584000 & up, B SN: 201000 & up, 50, 60, 70 gas, 520 up to SN: 5208099, 620 up to SN: 6213099, Replaces: AB3580R Fits: M, MC, MI, 40C, H, S, U, V, W Replaces: AM223T, AM629T (13-3/4" from center of drive pin to the first bend) NOTE: Bare steel. Price (1948-58)...................................................................... JDS312......... $10.25 (1959-60)...................................................................... JDS313......... $12.00 (1961-72)...................................................................... JDS314......... $12.00 Description / Application Spinner fits: MT, 40T, 420T, 430T Replaces: AM1126T (8" from center of drive pin to the first bend) NOTE: Bare steel. Serial number tags w/ rivets NOTE: Anodized Aluminum. Customer must stamp serial number. Order # JDS721 Price $24.95 JDS723 $24.95 JDS747 $29.95 JDS725 $24.95 Description / Application Serial Number Tag w/ Rivets Fits: G (Blank, 3-3/8" L x 1-5/8" H) USA made Serial Number Tag w/ Rivets Fits: H (Blank, 3-5/8" L x 1-3/8" H) USA made $34.95 Serial Number Tag w/ Rivets Fits: L (Blank, 3-5/8" L x 1-3/8" H) USA made JDS719 $24.95 Serial Number Tag w/ Rivets Fits: LA (Blank, 3-5/8" L x 1-3/8" H) USA made $0.25 ABC1585 $0.50 392 Order # Price Rivet only (For Serial Number Tags) (6 x 3/8", .135" shank O.D.) NOTE: Steel. Sold individually. Rivet only (For Serial Number Tags) (.347" o/a length, .225" head dia., .255" useable shank length, .126" shank dia.) USA made NOTE: Brass. Sold individually. Customer may need to drill the tag for the rivet. Description / Application JDS342 $53.60 EACH JDS058 $50.95 EACH Screen only (For Front Grille) Fits: B, H Replaces: B1430R, H556R (RH), H494R (LH) NOTE: Preformed w/ curved holes; must trim for final fit; RH & LH are the same. 2 required per tractor; Sold individually. 17-1/8" tall x 12-1/16" total wrap around width. JDS343 $56.45 EACH Screen only (For Front Grille) Fits: G Replaces: F654R USA made NOTE: Preformed; must bend bolt holes & trim for final fit. RH & LH are the same. 2 required per tractor; Sold individually. JDS479 $49.95 EACH JDS196 $21.95 Serial Number Tag w/ Rivets Fits: B (Blank, 3-3/8" L x 1-5/8" H) USA made JDS717 ABC464 Grille screens / side screens Serial Number Tag w/ Rivets Fits: A (Blank, 3-3/8" L x 1-5/8" H) USA made Screen only (For Front Grille) Fits: A, Replaces: A2111R USA made NOTE: Preformed; must bend bolt hole & trim for final fit. RH & LH are the same. 2 required per tractor; Sold individually. 20" tall x 14-3/4" wrap around width. Screen only (For Front Grille) Fits: M, MC, MI, MT Replaces: AM747T, M314T USA made NOTE: Preformed & ready to install. RH & LH are the same. 2 required per tractor; Sold individually. Screen fits: A, G, M (18" x 24) USA made NOTE: Flat - Must shape to fit. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS195 $21.95 Description / Application JDS088 JDS755 JDS518 (RH) $79.95 EACH JDS332 $165.50 JDS333 $165.50 JDS175 JDS112 $15.95 EACH JDS2297 $78.50 $52.45 EACH JDS110 $83.50 $77.50 Screen fits: R, 80, 820, 830 2-cyl, 840 Replaces: R293R (35" x 22-1/2) USA made NOTE: 1 used per tractor. JDS111 $83.50 $78.95 Screen (For tractors w/ 1-piece grille) Fits: 40C, (40S SN: 60001 - 69403), 40 Utility SN: 60001 - 63119, 420C, Replaces: M1728T Replaces: M1728T (Approximately 24-1/2" x 17-3/4) USA made NOTE: 1 used per tractor. JDS2299 $98.50 $49.95 EACH Screen fits: AO, AR, 60 Standard up to SN: 6042999, 60 Orchard, 620 Orchard (1 used per tractor), Replaces: A3724R (29-3/4" x 21-3/8) USA made Screen fits: 50, 520, 530 Replaces: B3069R (12-7/8" x 17-3/4) USA made NOTE: RH & LH are the same. 2 required per tractor; Sold individually. Screen Rod w/ Washer & Nut (For JDS088 Screen) Fits: 50, 520, 530 Replaces: B3070R, 12H10R, 14H785R USA made NOTE: 4 used per tractor; Sold individually. Screen fits: 60 Rowcrop, (60 Standard SN: 6043000 & up), 70, 620, 630, 720, 730 Replaces: A4316R (21-1/4" x 14) USA made NOTE: RH & LH are the same. 2 required per tractor; Sold individually. Screen (For tractors w/ 2-piece grille) Fits: Some 40, 320, 330, 420, 430 Replaces: M1906T, M4326T, T11855T (8-7/8" x 17-3/4) USA made NOTE: RH & LH are the same. 2 required per tractor; Sold individually. Description / Application Screen Fits: 435 JDS517 Replaces: AT11540T JDS518 Replaces: AT11539T USA made Screen (1 Hole) Fits: 1010 Replaces: AT20629 (23-1/2" H x 15-1/2" W) USA made Screen (2 Hole) Fits: 2010 Replaces: AT11703 (23-5/8" H) USA made Side Screen w/ Frame Fits: 2510, 2520 Replaces: AR38234 USA made NOTE: Powder coat JD green. Side Screen w/ Frame Fits: 3010, 3020 Replaces: AR26849 (18.250" wide x 19.125" tall) USA made Chassis parts JDS190 $48.30 EACH Price $79.95 EACH John Deere JDS089 $87.35 Order # JDS517 (LH) Screen fits: B, H (15" x 18) USA made NOTE: Flat - Must shape to fit. JDS731 Grille screens / side screens cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Grille screens / side screens cont... Side Screen w/ Frame Fits: 4000, 4010, 4020 Replaces: AR26539, AR32720 (20" x 17") USA made Side Screen w/ Frame Fits: 4320 Replaces: AR48488 USA made JDS949 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $5.40 Side Screen & Side Panel Spring Fits: 820 3-cyl. & up, 1010 thru 8850; Industrials: 300 thru 600 series Replaces: R26858, R70421 (10.695" long, .570" O.D.) 393 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Deluxe fastener kits - USA made Fits: H JDS035 Replaces: AH649R JDS034 Replaces: AH648R Description Order # NOTE: The following kits include bolts, screws & washers for the hood, grille, nose shutters; hood rubber washers & cushion. Price Order # Price Applications JDS1012 $79.80 NEW! Fits: Unstyled A series (All up to SN: 476999) NOTE: Has the letter "E" on the radiator bolts. Approx. 148 pieces. JDS2649 $79.95 Fits: Early hand start Styled A SN: 477000 583999 using round head Phillips bolts NOTE: Approximately 81 pieces. JDS2657 $79.95 Fits: Early electric start Styled A SN: 477000 - 583999 using round head Phillips bolts NOTE: Approximately 101 pieces. JDS1061 $79.95 Fits: Styled A series (All SN: 584000 647999) NOTE: Approximately 97 pieces. JDS1014 $79.95 Fits: Styled A series (All SN: 648000 and up) NOTE: Approximately 97 pieces. JDS1034 $79.80 NEW! Fits: Unstyled B series (All up to SN: 59999) NOTE: Has the letter "E" on the radiator bolts. Approximately 152 pieces. JDS2655 $79.95 Fits: Early hand start Styled B SN: 60000 200999 using round head Phillips bolts NOTE: Approximately 83 pieces. JDS2659 $79.95 Fits: Early electric start styled B series SN: 60000 - 200999 using Phillips head bolts NOTE: Approximately 87 pieces. JDS1036 $74.95 Fits: Late Styled B series (All SN: 201000 275242) NOTE: Approximately 83 pieces. JDS2661 $79.95 Fits: Late Styled B SN: 275242 & up using hex head clutch bolts NOTE: Approximately 83 pieces. JDS2663 $79.95 Fits: D, DI up to SN: 171954 using round head Phillips head bolts NOTE: Approximately 66 pieces. JDS2665 $79.95 Fits: Styled D, DI SN: 171955 - 187702 using hex head clutch bolts NOTE: Approximately 66 pieces. JDS2667 $79.95 Fits: Styled D, DI SN: 189578 & up using flat hex head clutch bolts NOTE: Approximately 66 pieces. JDS2669 $79.95 Fits: Styled G, GM series SN: 18553 - 32456 using round head Phillips bolts NOTE: Approximately 69 pieces. JDS2671 $79.95 Fits: Styled G, GM series SN: 32457 - 48607 using round head clutch bolts NOTE: Approximately 69 pieces. JDS1452 $79.95 Fits: G SN: 48608 & up using hex head clutch drive bolts NOTE: Approximately 69 pieces. JDS1032 $42.75 Fits: L SN: 625000 & up, LA, LI NOTE: Approximately 75 pieces. JDS1038 $96.50 Fits: 50, 520 gas, All-fuel NOTE: Approximately 98 pieces. LH Front Grille w/ Screen...................................... JDS035......... $174.95 RH Front Grille w/ Screen...................................... JDS034......... $174.95 Fastener stud assemblies, part - USA made Order # JDS851 JDS854 JDS2653 Price $8.95 $8.95 $8.95 Chassis parts John Deere Front grille w/ screen Description / Application Short Stud Assembly (For Rigid Receptacle) Fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 435, Replaces: M315T (fastener), M316T (.410" from head to center of pin hole) NOTE: Used at sides. Long Stud Assembly (For Floating Receptacle) fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 435 Replaces: M322T (fastener), M316T (.450" from head to center of pin hole) NOTE: (2) JDS854 long stud used on most Dubuques at center of hood. Rest are JDS851 short studs. (1) JDS854 long stud used on most Dubuques at center of grille. (2) JDS851 short studs are used at sides. Threaded Style Fastener Stud w/ T nut Fits: Same as JDS851 & JDS854 Replaces: M315T, M322T NOTE: This is an improved version of the original fastener. It is threaded so it can be tightened as needed w/out chipping the paint. It is a direct replacement for the pin style fastener & stamped air loc 160 on the slotted head. Sold individually. Sheet metal bolt kits Order # Price JDS795 $28.50 Fits: A SN: 477000 - 586999, B SN: 96000 200999 (Both w/ long hoods electric start) NOTE: For hood, grilles & battery covers. JDS802 $28.50 Fits: A SN: 477000 - 586999, B SN: 60000 200999 (Both w/ long hoods & electric start) NOTE: For hood, grilles only. JDS798 $28.50 Fits: G SN: 13000 - 25999 NOTE: For hood, grille only. JDS800 $28.50 Fits: H (All years) NOTE: For hood, grille only. 394 Application STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS1450 $91.80 Application NEW! Fits: 530 gas, All-fuel NOTE: Approximately 104 pieces. JDS1041 $96.50 Fits: 60 Rowcrop, 620 Rowcrop NOTE: Approximately 100 pieces. JDS1448 $91.80 NEW! Fits: 630 gas, All-fuel NOTE: Approximately 106 pieces. JDS1454 $90.85 Fits: 70, 720 gas, All-fuel NOTE: Approximately 100 pieces. JDS1455 $90.65 Fits: 70, 720 diesel NOTE: Approximately 102 pieces. JDS1456 $96.45 NEW! Fits: 730 gas, All-fuel NOTE: Approximately 106 pieces. JDS1457 $96.45 NEW! Fits: 730 diesel NOTE: Approximately 102 pieces. Front nose cones, screens - USA made Order # JDS353 Price Description / Application Hoods, parts Order # Price Fits: Unstyled A SN: 413879 - 476999 Replaces: AA526R (47" long) USA made NOTE: Bare metal and subject to large package surcharge. JDS883 $1.95 Rubber Bumper (For Hood) Fits: M, 40, 320, 330, 420, 430 Replaces: M1605T NOTE: 2 required per tractor; Sold individually. JDS300 $29.95 Hood Patch fits: Styled A, G, 60 (7-7/16" x 7-7/16", 3-7/8" hole dia.) USA made NOTE: Chamfered; Weld on. Designed for an OEM muffler. If customer has an aftermarket exhaust may have to increase the hole dia. to fit. JDS186 $34.95 Hood Patch fits: Styled B (7-7/16" x 7-3/8", 3-1/2" hole dia.) USA made NOTE: Chamfered on two sides; Weld on. Designed for an OEM muffler. If customer has an aftermarket exhaust may have to increase the hole dia. to fit. Fits: Unstyled B SN: 1000 - 42199 Replaces: AB403R (42-3/8" long, 18" gauge steel) USA made NOTE: Bare metal and subject to large package surcharge. Front Nose (Hood Medallion) Fits: Styled B SN: 60000 & up Replaces: B1445R $88.50 JDS502 $92.90 JDS503 $92.90 JDS2071 $104.95 JDS2075 $119.95 JDS2079 $129.95 Front Nose Cone Screen Fits: 2510, 2520 Replaces: AR38233 NOTE: Powder coat JD green. Front Nose Cone Screen Fits: 3010, 3020 Replaces: AR26494 NOTE: Powder coat JD green. Front Nose Cone Screen Fits: 4000, 4010, 4020 Replaces: AR26477 NOTE: Powder coat JD green. Front engine side shields Order # Price JDS963 (LH) $107.15 JDS961 (RH) $107.15 Front Nose Cone Screen Fits: 4320 Replaces: AR48449 NOTE: Powder coat JD green. Front Nose Cone Screen Fits: 4520, 4620, 7020 Replaces: AR43009 NOTE: Powder coat JD green. JDS963 $104.95 JDS745R (RH) $104.95 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com JDS745L Fits: 3010, 3020 Rowcrop, Utility JDS963 Replaces: AR26498 JDS961 Replaces: AR26497 (19" tall) JDS961 JDS745L (LH) Front Nose Cone Screen Fits: 5010, 5020, 6030, 7520 Replaces: AR35025 NOTE: Powder coat JD green. Application Fits: 4000, 4010, 4020 JDS745L Replaces: AR26491, AR32690 JDS745R Replaces: AR26490, AR32689 (20" tall) JDS745R 395 Chassis parts $209.95 Hood (Side fill) John Deere JDS616 $119.35 JDS2298 Description / Application JDS177X $209.95 Hood (Side fill) All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Deluxe fastener kits - USA made cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Rear engine side shields, parts Order # Price JDS687 (LH) $79.95 JDS689 (RH) $79.95 JDS687 JDS689 JDS008 (LH) $63.55 JDS009 (RH) $63.55 JDS008 JDS009 JDS694 (LH) $74.95 JDS696 (RH) $74.95 JDS694 JDS696 JDS1001 $254.95 (LH) JDS1005 $154.50 (RH) JDS1001 JDS851 JDS949 396 Air cleaner parts Description / Application Order # Rear Engine Side Shield Fits: 3010, (3020 up to SN: 122999) JDS687 Replaces: AR26851 JDS689 Replaces: AR26850 USA made Rear Engine Side Shield Fits: 4010, (4020 up to SN: 200999) JDS008 Replaces: AR26770 JDS009 Replaces: AR26769 USA made Rear Engine Side Shield Fits: 4000, (4020 SN: 201000 & up) JDS694 Replaces: AR40774 JDS696 Replaces: AR40773 USA made Rear Engine Side Shield Fits: 5010, 5020, 700 Industrial (All w/out cabs) JDS1001 Replaces: AR35024, AR36796 JDS1005 Replaces: AR35023, AR53645 (25-3/8" tall) NOTE: Will NOT fit 6030. Price $24.75 JDS1727 $12.85 ABC422 $12.95 Air Cleaner Oil Bath Filter Element Fits: John Deere models (3" wide x 78" long) NOTE: Replaces the mesh in existing air cleaners. Sold by the bag (Normal utility air cleaners will use 2 bags). JDS540 $27.50 Air Cleaner Oil Cup fits: (B, BN, BNH SN: 63480 & up), (BO, BR SN: 329302 & up), M, MC, MI, MT, 40, 50, 320, 330, 420, 430, (440 gas up to SN: 448000), 520, 530, 1010 gas SN: 246944 & up, 2010 gas Replaces: AB1626R, AB3477R, AM465T, AM468T, AM3172T, AT10592 (5-3/8" I.D., 5-3/4" O.D.) JDS541 $12.15 Air Cleaner Oil Cup Clamp Fits: (B, BN, BNH SN: 63480 & up), (BO, BR SN: 329302 & up), M, MC, MI, MT, 40, 50, 320, 330, 420, 430, (440 gas up to SN: 448000), 520, 530, (1010 gas SN: 246944 & up), 2010 gas Also fits the following for Pony motor air cleaner: 70, 720, 730, 80, 820, 830, Replaces: AB1629R, AM466T, AR1428R FDS034 $14.95 FDS081 $10.30 $5.40 Fastener Stud Assembly Fits: 1010 up to SN: 31000 (4 used), 2010 up to SN: 29000 (2 used) Replaces: M315T (fastener), M316T (cross pin) (.410" from head to center of pin hole) USA made NOTE: Sold individually. Side Panel Spring Fits: 820 3-cyl. & up, 1010 thru 8850; Industrials: 300 thru 600 series Replaces: R26858, R70421 (10.695" long, .570" O.D.) Air Cleaner Cap Fits: M, 40, 320, 330, 420, 430, 440 up to SN: 448000, 1010 series Replaces: AM371T, AM467T (1.950" O.D.) Air Cleaner to Carburetor Hose Fits: M, 40, 320, 330 series Replaces: M412T (1.750" I.D.) Air Cleaner Oil Cup Fits: H Replaces: AH773R (4-3/4" O.D. at lip, 4-15/32" I.D., 3" high) Air Cleaner Oil Cup Clamp Fits: H Replaces: AH774R JDS1005 $8.95 Description / Application JDS516 JDS753 $14.95 Air Cleaner Pipe Grommet Fits: 820 3-cyl., 830 3-cyl., 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3150, 4000, 4020 diesel, 4030, 4040, (4050 up to SN: 5510), 4230, 4240, 210C Crawler Replaces: AR56061, AR56275, R28799, R50082, R57119 (2.366" tall - not compressed, 2.600" I.D. - top opening, 6.815" O.D. - bottom) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS1113 $79.95 ABC1765 $14.95 Air cleaner parts cont... Description / Application Dry Air Cleaner Dust Bowl Fits: 4000, 4020, 600 Industrial (All diesel & w/ dry air cleaner & precleaner) Replaces: R39827 (4" tall, 9-1/8" I.D.) USA made NOTE: Bare metal. Dry Air Cleaner Vacuator Valve (Dust Unloader Valve) Fits: 820 3-cyl. - 6030 (All w/ 3" unloader valve), Replaces: R45096, T23262, T23263, TT206659 Order # Price JDS429 $68.50 Air Cleaner Stack Tube Fits: 620, 720 Replaces: AF3581R (18" tall) USA made JDS430 $68.50 Air Cleaner Stack Tube Fits: 630, 730 Replaces: AR20669R (16" tall) USA made $80.95 Air Cleaner Intake Stack Fits: Unstyled A Replaces: AA362R (35" tall o/a; 24" tall cap to 4 hole mounting flange) USA made JDS482 Description / Application Air Cleaner Stacks cont... Air Cleaner Stacks JDS480 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Air cleaner parts cont... JDS428 $89.95 Air Cleaner Stack Fits: R, 80, 820, 830, 830I Replaces: AR319R (3 hole mounting flange) USA made $78.95 JDS434 $10.75 Air Cleaner Stack Adaptor Plate Fits: 720, 730 Replaces: F3091R USA made John Deere Air Cleaner Intake Stack Fits: Unstyled B Replaces: AB239R (22" tall; 3 hole mounting flange) USA made Air Cleaner Hose JDS865 $64.95 $5.35 Air Cleaner Stack Fits: Styled A Replaces: AA1941R, AA4048R NOTE: Powder coat green. Hose (Air cleaner to carb) Fits: B SN: 201000 & up, 50, 520, 530 Replaces: B2372R (2-1/16" I.D., 2-1/2" O.D., 4" long) Chassis parts JDS536 Pre-cleaner parts JDS534 $64.95 Order # Price ABC1824 $49.95 Air Cleaner Stack Fits: Styled B Replaces: AB1463R NOTE: Powder coat green. JDS329 $89.95 Description / Application Pre-Cleaner Cap Assembly Fits: Some 320, 330, 420, 430, (440 gas up to SN: 448000), 1010 gas, 1020, 1520, 2020 & others w/ 2" I.D. base & 5-1/2" bowl dia. Replaces: AM3672T, AT16837 USA made ABC383 Air Cleaner Stack Fits: Styled G, 620, 630, 720, 730 Replaces: AF656R, AR20668R (4 hole mounting flange) USA made $74.95 Pre-Cleaner Cap Assembly Fits the following diesels: 435, 440, 1010, 2010, 2020, (2030 up to SN: 78185), 3010 gas, LP, 3020 gas, LP up to SN: 83999, 4010 gas, LP, 4020 gas, LP up to SN: 118999 w/ 2-1/4" I.D. base, Replaces: AR26416, AR28587, AT170947 USA made Pre-cleaner parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 397 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Pre-cleaner parts cont... Order # Price ABC512 $74.95 JDS741 $99.95 ABC510 Pre-cleaner parts cont... Description / Application Order # Pre-Cleaner Cap Assembly fits: 2510, 2520 diesel, 3010 diesel, 3020 gas, LP, diesel SN: 84000 & up, diesel, 4000 gas & LP, 4020 gas & LP SN: 119000 & up w/ 2-1/2" I.D. base Replaces: AR26811, AR27041, AR28586, AR34166 USA made Pre-Cleaner Cap Assembly w/ Brass Nut Fits: Donaldson Pre Cleaners; 520, 530, 620, 630, 720, 730, 820 3-cyl. thru 2640 Replaces: AF3580R, AL39934 (3" I.D. base) NOTE: Powder coat green. See website for full applications. $64.60 Price JDS557 $68.95 JDS561 $75.00 JDS535 $39.95 JDS938 $4.95 ABC339 $16.95 Pre-Cleaner Cap Assembly Fits: John Deere models w/ 4" I.D. base ABC554 ABC484 $42.95 $24.95 Pre-Cleaner Cover w/ Brass Knurled Nut Fits: 320, 330, 420, 430, (440 up to SN: 448000), 1010 gas, 1020, 1520, 2020 (All w/ 5-1/2" bowl), Replaces: AM3773T, AT16840 (5-7/16" I.D.) USA made NOTE: Aluminum. Pre-Cleaner Bowl Fits: 320, 330, 420, 430, (440 up to SN: 448000), 1010 gas, 1020, 1520, 2020 Replaces: AM3772T NOTE: Clear plastic. ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at bottom = 5", Bowl side height = 2-7/16", Cone I.D. at top = 2-7/16", Overall height = 3-9/16" JDS559 ABC338 $24.95 $13.95 Pre-Cleaner Base (For ABC338 Bowl & JDS559 Top) fits: All Donaldson PreCleaners; 520, 530, 620, 630, 720, 730, 820 3-cyl. thru 2640 (All w/ 3" pipe) Replaces: AF3584R NOTE: Metal. Pre-Screener fits: All Donaldson Pre-Cleaners; 520, 530, 620, 630, 720, 730 (All w/ 3" O.D. pipe) Replaces: AR21789R NOTE: Metal. Screen w/ Clip & 2 Springs (For Pre-Screener) fits the following w/ 7" pre-cleaner bowl: 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020 gas, LP, diesel; (4000, 4010, 4020 gas, LP using 5 1/4" tall screen), Replaces: AR21790R (5-1/4" tall x 19-3/8) NOTE: Powder coat green. Pre-Screener Clip & Springs Kit (For JDS535 Screen) Replaces: R21645R (clip), R21644R (spring) NOTE: Powder coat green. Pre-Cleaner Bowl (10-1/2" dia.) For 3" to 4" inlet Fits: 80, 820 2-cyl., 830 2-cyl., 840 2-cyl.,4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Replaces: R28795 NOTE: Clear plastic ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side height = 3", Cone I.D. at top = 5-9/16", Overall height = 4" Pre-Cleaner Cover w/ Brass Nut (For 7" bowl) fits: All Donaldson Pre-Cleaners w/ ABC338 Bowl Replaces: AF3583R, AL37364 (7" dia.) NOTE: Metal. Wittek© tower (hose) clamps USA made Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet Fits: Some 520, 530, 620, 630, 720, 730, 820 3-cyl., 830 3-cyl., 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2155, 2240, 2155, 2255, 2355, 2440, 2510, 2520 diesel, 2630, 2640, 2840, 3010, 3020; 4000, 4010, 4020 gas, LP, Replaces: R28794, Can replace Donaldson PO20227 NOTE: Clear plastic. ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3", Cone I.D. at top = 3-1/2", Overall height = 4-1/8" 398 Description / Application Original Style Wittek© Tower (Hose) Clamp Fits: John Deere Unstyled, New Generation models Order # Price Dimension IHS636 $3.50 (.775" - 1.013" size range) IHS637 $3.50 (1.687" - 1.780" size range) IHS638 $3.50 (1.815" - 2.000" size range) IHS639 $3.50 (1.807" - 2.285" size range) IHS640 $3.50 (2.175" - 2.500" size range) IHS641 $3.50 (2.400" - 2.625" size range) IHS642 $3.50 (2.350" to 2.765" size range) IHS643 $3.50 (2.685" to 2.995" size range) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fits: John Deere models Diameter = Hose O.D. Specify size when ordering Order # Price JDS570 $5.85 Replaces: H141R (2-1/4" dia.) JDS325 $5.95 Replaces: B78R (2-1/2" dia.) JDS566 $5.85 (2-3/4" dia.) JDS293 $5.85 (3" dia.) JDS568 $6.75 Replaces: A448R, B1813R (3-1/4" dia.) JDS352 $5.85 Replaces: F90R (4" dia.) Order # Price $19.35 ABC1823 $4.95 ABC1656 $5.25 Fits: Tractors using 1-1/2" wide webbing for fuel tanks & other sheet metal parts (3' L x 1-1/2" W x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. ABC1827 $5.50 Fits: Tractors using 2" wide webbing for fuel tanks & other sheet metal parts (3' L x 2" W x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. $3.95 Description / Application Wing Fastener w/ Knurled Cross Pin (For Fuel Tank Door) fits: 70, 720, 730 (All w/ Pony motor) Replaces: M316T, M397T, M1896T, F2134R (Pin = .309" dia., .713" long) USA made NOTE: Yellow zinc plated. Fuel Tank Pad fits: AO & AR both SN: 272000 & up, B series SN: 96000 & up, G SN: 13000 & up, 60 Standard up to SN: 604299, 620 Orchard, Replaces: B1825R (1-1/2" O.D., 1/2" thick, 1/2" center hole) NOTE: Rubber. Metal bushing not included. 2 used per tractor; Sold individually. Description / Application Fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts (3' L x 1" W x .042" thick) USA made NOTE: Economy black woven nylon. Can be glued or riveted. Sold in 3-foot length. Fits: Tractors using 1" wide webbing for fuel tanks & other sheet metal parts (3' L x 1" W x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Fuel caps w/ gasket, parts Order # Price JDS596 $96.45 JDS596GKC $9.95 JDS1368 $12.80 JDS416 $9.95 $1.15 Fuel Tank Mount Grommet Fits: M, MC, MI, MT Replaces: M305T NOTE: 8 used per tractor; Sold individually. ABC2672 $124.95 Fuel Tank Filler Neck Straightening Tool w/ Instructions fits: A thru R, Early 50 thru 70 gas, (820, 830 2-cyl.) (Same applications as IHS226, JDS416 caps) USA made NOTE: Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks). This part is a duplicate of the factory service tool that works in many applications using the ABC1880, IHS226, IHS416 & JDS416 caps. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Underside view Description / Application Fuel Cap w/ JDS596GKR Gasket & JDS1368 Baffle Fits: Early D SN: 30400 - 109943, GP Replaces: AA795R USA made Chassis parts JDS567 Price $3.95 John Deere JDS860 Order # ABC494 Dimension Fuel tank parts JDS910 Fuel tank webbings All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Wire hose clamps Gasket (Cork) only (For JDS596) Replaces: D288R USA made NOTE: Cork. Oval Filler Cap Baffle Fits Unstyled models: A, AO, AR, B, BO, BR, D, (G SN: 4251 - 12999), GP Replaces: D126R USA made Fuel Cap w/ IHS239 Gasket Fits: Unstyled A, B, (D SN: 109944 & up), G, GP, Replaces: AD709 Replaces: AD709R (2-11/16" I.D., 5/8" height) NOTE: New and improved, has splash guard (similar to ABC1880 except no top vent - side vent - and plain, no writing). These were used on JD's until approx. 1941-42 year then they used IHS226 cap with lettering. Fuel caps w/ gasket, parts continue on next page 399 Order # IHS226 Price $9.95 Underside view ABC1880 (Top vented) $9.95 Underside view IHS239 $1.95 Description / Application Order # Vented Fuel Cap w/ IHS239 Gasket & Splash Guard (Says "Buy Clean Fuel Keep It Clean") fits: A, AO, AR, B, D, G, H, R, (50 up to SN: 5018449), 60 up to SN: 6035349, (70 up to SN: 7012349), 80, 820 2-cyl., 830 2-cyl. IHS226: Replaces: AD709R, AH83351, AR369R (2-11/16" I.D., 5/8" height) ABC1880: Replaces: AD709R, AH83351, AR369R (2-11/16" ID, 1.118" height (cap only)) MHS043 $9.95 Fuel Cap (Vented) w/ MHS043GK Gasket fits: 50 SN: 5018450 & up, 60 SN: 6035350 & up, 70 SN: 7012350 & up, 70D, 300, 320, 330, 400, 420, 430, 435, 440, 480, 500, 820 3-cyl., 830 3-cyl., 1010, 1020, 1520, 1530, 2010, 2020, 2030, (2040, 2240 both up to SN: 349999) 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010 Replaces: AF2914R, AT20911, AT28483 (2-7/8" O.D.) $12.95 Underside view JDS729 $29.95 Underside view Fuel Cap (Non-Vented) w/ Gasket Fits: 520, 530, 620, 630, 720, 730 (1.761" tang length) NOTE: The only correct cap on the market for these 2-cylinders! Must have vented fuel tank to use this cap, make sure vent in tank is not plugged. Fuel Cap w/ Red Rubber Cover & Gasket fits: 1010, 2010, 2040, 3010, (3020 up to SN: 122999), 4010, (4020 up to SN: 200999), 5010, Replaces: AT20911 (cap), R27183 (cover) NOTE: Also fits same as MHS043, MHS045. JDS742 $14.95 Red Rubber Cover only (For JDS729 Fuel Cap) (Caps w/ 3.240" O.D.) NOTE: Does not fit MHS043, MHS045. JDS504 $19.95 Fuel Cap w/ Gasket Fits: L, LA, M series Replaces: AL2275T (1.465" I.D., 5/16" height) NOTE: Zinc plated. Underside view 400 $24.95 Underside view Description / Application Tall Fuel Cap w/ Gasket Fits: M, MC, MI, MT, 40, (320 up to SN: 325107), 420 up to SN: 126976 Replaces: AM3892T MHS043GK $1.50 Gasket only (For JDS729, MHS043, MHS045, JDS504, JDS555 Fuel Caps) (2.622" O.D., 1.500" I.D., 0.100" thick) NOTE: Rubberized cork gasket. IHS338 $9.95 Starting Tank Fuel Cap w/ Gasket Fits: 70D, 720D, 730D, 80, 820, 830, 840 (All w/ Pony motor gas tank); 520, 530, 620, 630, 720, 730 (All w/ All-fuel starting tank), Replaces: AF2155R USA made Underside view Gasket only (For IHS416, JDS226, JDS416, ABC1880 Caps) (2.580" O.D., 1.900" I.D., .095" thick) USA made NOTE: Rubberized cork. MHS045 Price JDS555 Gasket only (For JDS416, IHS226, ABC1880 Caps) (2.563" O.D., 1.875" I.D., .125" thick) NOTE: NBR rubber. $1.95 Underside view Chassis parts Fuel caps w/ gasket, parts cont... IHS2642 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Fuel caps w/ gasket, parts cont... JDS1397 $14.00 Underside view ABC1221 $4.95 Fuel Cap w/ Gasket fits: Some 1640, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2555, 2750, 2755, 2940, 2950, 2955, 3040, 3140, 3150, 3155, 3255, 3640, Replaces: AL31274, AL34678 (3.855" O.D., 2.638" tab to tab) NOTE: Metal; painted red. Gasket only fits: 1640, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2555, 2750, 2755, 2940, 2950, 2955, 3040, 3140, 3150, 3155, 3255, 3640, Replaces: R481R (2.242" I.D., 2.948" O.D.) USA made NOTE: Rubberized cork. Rubber ring grommets NOTE: Fits around fuel filler neck. Order # Price Application JDS681 $23.00 Fits: 50 up to SN: 5018449, 60 up to SN: 6035349, (70 & 70D both up to SN: 7012349), (60, 620 & 630 Orchards only) Replaces: A4873R, A5137R (2-1/2" I.D., 4-1/2" O.D.) JDS590 $19.95 JDS512 $18.95 JDS744 $19.95 Fits: 50 SN: 5018450 & up, 520, 530 Replaces: B3317R (2-1/16" I.D., 3-3/8" O.D.) Fits: 60 SN: 6035350 & up, (70, 70D SN: 7012350 & up), 620, 630, 720, 720D, 730, 730D, Replaces: A5157R, R39613 (2-3/16" I.D., 3-7/8" O.D.) Fits: 330, 430 Replaces: T11034T (2-1/8" I.D., 3-9/16" O.D.) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm JDS546, ABC281 components NOTE: Fits around fuel filler neck. The following parts (Sold separately) will fit JDS546, ABC281 Order # Price JDS679 $19.95 JDS593 $19.95 Sediment Bowl Assys: Application Order # Fits: 80, 820, 830, 840 2-cyl. Replaces: R1385R (2-7/16" I.D., 3-3/4" O.D.) Fits: 820 3-cyl., 830 3-cyl., 920, 930, 940, 1010, 1020, 1030, 1040, 1120, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3120, 3130, 4000, 4010, 4020, Replaces: R39613R, R34193, R82873 (2.295" I.D., 3.965" O.D.) NOTE: Red & w/ raised "FUEL". Price ABC124 $4.95 Glass Bowl, Replaces: C1777R, AA4507R (2.315" L, 2-1/8" O.D. ) JDS642 $0.95 Gasket, Replaces: C1778R (2.150" O.D.) USA made JDS641 $4.95 Screen (For JDS546 & JDS1983) Replaces: AA519R (1.785" O.D., .500" center hole) ABC229 (Brass) $3.50 ABC534 (Plastic) $3.75 ABC236 $7.20 Bail Assembly w/ Brass Nut Replaces: AA517R (2-1/8" O.D., 2.370" long) JDS903 $7.85 Fuel Line Fitting (For ABC281) Fits: A & up, (820, 830 2-cyl.) (1/8" pipe to 1/2" inverted flare, fits 5/16" tube) USA made NOTE: Brass. Check website for additional application information. Fuel tank screen Fits: Most John Deere models w/ stem style sediment bowl. Will fit ABC092, ABC281, IHS713, IHS1577 sediment bowl assemblies, Also fits JDS1983 automatic shut off (.375" screen O.D., .216" pipe O.D., 2.530" o/a length) USA made Description Order # Price Order # Price JDS1983 $157.15 Screen (3/8" dia. center hole) John Deere Fuel Tank Screen...................................................... ABC1315..... $8.50 NOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank bottom from entering the sediment bowl assembly. To fit ABC281, IHS713, IHS1577 customer must drill sediment bowl stem out. Description Description / Application Sediment bowl assys., parts ABC281 ABC124 Price $44.94 $34.45 JDS642 Description / Application All-fuel Sediment Bowl (Cast Iron w/ Brass Handle & Nut) Fits: A, B, D, G, GP, H series All-fuel; Engines: W - WSP, Replaces: AA499R (3/8" pipe inlet, 1/4" male pipe outlet) NOTE: Must be used w/ a 3-way valve, see following page. For tractors w/ two tanks. Sediment Bowl Assembly w/ 2.315" long Bowl & 1/4" x 5/16" Adapter For A SN: 584000 & up, B SN: 201000 & up, 50 up to SN: 5016132, 60 up to SN: 6028468, 70 gas up to SN: 7006493, 70D, 720D, 730D, 4030 gas, 4230 gas, 40 thru 7700 gas Combines, Replaces: AA4295R, AA4331R (3/8" pipe inlet, (1) 1/8" pipe outlet) NOTE: Will fit older JD A, B, D, G, H, etc. when switched to gas only. Also used to convert newer 2-cylinders from automatic shut off to manual shut off. Must adapt to your fuel line. JDS641 ABC229 ABC534 ABC236 Sediment Bowl Assembly (Automatic shut off) Fits: A SN: 584000 & up, 50, 60, 70, 520, 530, 620, 630 gas, Replaces: AA5777R Chassis parts Order # JDS546 JDS1983 components The following parts (Sold separately) will fit JDS1983 Sediment bowl assembly: Order # Price Description JDS950 $14.95 Fuel Filter Repair Kit fits the following w/ automatic fuel shut off: Late A SN: 584000 & up, 50 SN: 5016133 & up, 60 SN: 6028469 & up, 70 gas SN: 7006494 & up; 520, 530, 620, 630, (720, 730 gas). Also fits the following diesels w/ Pony start: 80, 720, 730, 820, 830, 840 2-cyl. Replaces: 2-A4983R, 2-A4978R, 1-AA4297R, 1-C1778R USA made NOTE: The diaphragms are made from Fairprene WFP-B2N1, which can withstand the ethanol in blended gasoline. O-ring made from Viton. JDS903 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Rubber ring grommets cont... Sediment bowl assys, parts continue on next page 401 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Sediment bowl assys., parts cont... JDS1983 components The following parts (Sold separately) will fit JDS1983 Sediment bowl assembly: Order # JDS951 JDS952 Price $4.95 $1.25 John Deere ABC039 ABC229 ABC534 ABC563 ABC499 / ABC092 / ACS326 components Automatic Fuel Shut Off Diaphragm Fits: Same as JDS950 Replaces: A4983R (.015" thick, 2.650" O.D., 6 holes) USA made NOTE: Made Fairprene WFP-B2N1. 2 used per tractor; Sold individually. The following parts (Sold separately) will fit ABC499, ABC092, ACS326 Sediment bowl assemblies: Automatic Fuel Shut Off Repair Washer Fits: Same as JDS950 Replaces: A4978R USA made NOTE: Viton. Order # Price Description ABC123 $2.90 Glass Bowl, Replaces: M3340T (2" O.D., 1.280" L) ABC039 $1.45 Gasket, Replaces: L886T (2" O.D.) USA made ABC229 (Brass) $3.50 ABC534 (Plastic) $3.75 Screen, Replaces: 49923D, L885T (3/8" dia. center hole) ABC563 $4.95 Bail Assembly w/ Nut Fuel shut off valve Fits: 70, 80, 720, 820 (All w/ Pony start diesel), Replaces: AF2153R, AR1128R (1/8" pipe thread) USA made Description Chassis parts ABC123 Description Order # 3-way fuel valves, parts Order # JDS661 Price $78.50 3-Way Fuel Valve (For JDS546) Fits: A SN: 410859 - 476999, B SN: up to 11621, D SN: 30400 - 143799, GP Replaces: AD680R NOTE: Brass. Teflon lining for superior sealing. Price Fuel Shut Off Valve (At carburetor)...................... JDS1065....... $26.75 Order # Price ABC499 $59.95 Description / Application Sediment Bowl Assembly Fits: L, LA, LI Replaces: AL2087T (1/8" pipe thread ends) ABC092 JDS1725 ACS326 402 $27.30 $7.95 $29.95 Description / Application Sediment Bowl Assembly Fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 440, 1010, 1010C up to SN: 15782,(gas) Replaces: AM706T, AM3100T, AT326991 (3/8" pipe inlet, 1/8" pipe outlet, 1.280" long bowl. Includes 5/16" compression adaptor fitting) Sediment Bowl Elbow Fits: L, LA, M, 40, 320, 330, 420, 430, 440 series; Combines: 11, 11A, 12, 12A Replaces: AL2730T (1/4" tube to 1/8" pipe elbow) USA made NOTE: Brass. Sediment Bowl Assembly Fits: 1010 diesel up to SN: 42000, 2010 gas, 2010 diesel SN: 29001 to 42000 Replaces: AT11973, AR51418 (Side inlet & outlet, 1/8" x 1/8" female pipe thread) JDS659 $89.95 JDS660 $89.95 JDS863 $2.25 3-Way Fuel Valve (For JDS546) Fits: Unstyled AO, AR both up to SN: 259999, Unstyled B SN: 11622 - 59999, BO, BR, (G SN:1000 - 12999) Replaces: AB609R NOTE: Brass. Teflon lining for superior sealing. 3-Way Fuel Valve (For JDS546) Fits: A SN: 497590 - 697756, (AO, AR both SN:260000 - 280849), B SN: 94494 - 305246, D SN:148872 - 191777, G SN: 13000 - 59701, H SN:20650 & up, Replaces: AB2805R NOTE: Brass. Teflon lining for superior sealing. Packing (For 3-Way Valve) Fits: Same as JDS661, JDS659, JDS660; AO, AOS, BO, GH; All-fuel: 50, 60, 70, 520, 530, 620, 630, 720, 730, W Stationary engine Replaces: D2122R USA made NOTE: Graphite infused (impregnated) cork. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price ABC490 $6.45 Fuel lines, parts cont... Description / Application In Line Fuel Filter w/ Hose & Clamps Fits: John Deere models using 3/8" fuel line NOTE: Must splice fuel line to use. Will help to keep rust & dirt out of carburetor ABC1421 ABC1221 Price $37.95 JDS627 $37.95 JDS628 $35.75 $5.25 Fuel Filter Element w/ Seals for Cav/ EACH Simms Fuel Filters fits: 820 3-cyl., 1010, 1020, 1520, (2010 SN: 42001 & up), 2020, 2030, 2510, 2520, 2755 Replaces: AT17387, Cav # 7111/296 (3-1/2" O.D. x 3/4" I.D. x 2.85" tall) NOTE: Sold individually. IHS1574 Order # JDS626 $26.50 $4.95 Glass Bowl (For Fuel Strainer/Water Trap) Fits: R, 80, 820 2 cyl, 830 2 cyl, 840 2 cyl Replaces: AR799R (2-7/8" O.D., 4" long) USA made Gasket fits: Same as IHS1574 Replaces: R481R (2.242" I.D., 2.948" O.D.) USA made NOTE: Rubberized cork. JDS780 $24.95 Fuel Line w/ Ferrules & Nuts Fits: M, MC, MI, MT Replaces: AM707T, L587T JDS1468 $24.95 Fuel Line (Strainer to Carburetor) Fits: 40, 320, 330, 420, 430 Replaces: AM1817T $37.95 JDS623 $37.95 JDS624 JDS1725 $7.95 JDS918 $44.65 JDS903 $7.85 JDS1011 $8.95 Fuel Line to Carburetor Fits: A SN: 410659 - 476999 Replaces: AA1888R USA made NOTE: Must be used w/ a 3-way valve. Fuel Line to Carburetor (all fuel & gas) Fits: A All Fuel SN: 477000 - 622820 & Gas SN: 477000 - 622820 Replaces: AA5067R sub for AA2349R USA made NOTE: Must be used w/ a 3-way valve for All Fuel applications or elbow #B2526R from sediment bowl to line for gas. $39.75 Fuel Line to Carburetor Fits: A SN: 622821 - 655571 Replaces: AA4299R USA made JDS625 $37.95 Fuel Line to Carburetor Fits: B SN: 11622 - 59999, BO, BR Replaces: AB1774R USA made NOTE: Must be used w/ a 3-way valve. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Sediment Bowl Elbow fits: L, LA, M, 40, 320, 330, 420, 430, 440 series; Combines: 11, 11A, 12, 12A, Replaces: AL2730T (1/4" tube to 1/8" pipe elbow) USA made NOTE: Brass. Fuel Line fits: 60 up to SN: 6028468 (All w/ manual sediment bowl) Replaces: AA5349R (18" long; 23-3/4" long w/ bends) USA made NOTE: Bare metal Connector (Fuel Line to Carburetor) Fits: A, B, D, G, GP, H, R, 50, 60, 70, 70D, 80, 520, 530, 620, 630, 720, 720D, 730, 730D, 820 2-cyl., 830 2-cyl., 840, W Stationary Engine Replaces: A258R, D392R (1/8" pipe to 1/2" inverted flare, fits 5/16" tube) USA made NOTE: Brass. Gland & Nut (Solder to 5/16" line) Fits: A, B, D, G, GP, H, Stationary engine W Replaces: E2150R (gland), A2069A (nut) NOTE: Build your own lines. 403 Chassis parts JDS622 Description / Application Fuel Line to Carburetor (all fuel & gas) Fits: B SN: 201000 - 238795 Replaces: AB3571R USA made NOTE: Must be used w/ a 3-way valve for All Fuel applications or elbow #B2526R from sediment bowl to line for gas. John Deere Price Fuel Line to Carburetor Fits: B SN: 60000 - 200999 Replaces: AB2751R USA made NOTE: Must be used w/ a 3-way valve. Fuel Line to Carburetor Fits: B SN: 238796 & up Replaces: AB3888R Fuel lines, parts Order # Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Fuel filters, parts All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Throttle parts Order # Price JDS386 $44.50 JDS385 $29.95 JDS139 $29.95 JDS929 $4.25 JDS832 $9.95 JDS849 $10.75 JDS750 $4.95 Throttle parts cont... Description / Application Throttle Lever Fits: A SN: 584000 & up, B SN: 201000 & up Replaces: B2536R USA made Price Description / Application $34.95 Speed Change Spring / Governor Spring Fits: B SN: 201000 & up, (R w/ Pony motor), 50, 520, 530, Replaces: B2636R (0.052" thick) USA made JDS356 $34.50 Throttle Lever Fits: H, M, MI, MT Replaces: H281R Throttle Lever Fits: 320 up to SN: 325000, 420 Crawler, 420 series, I, S, T, U, V, W up to SN: 125000, 420 LP SN: 125001 & up Replaces: M1758T Throttle Friction Disc Fits: 40, 320, 330, 420, 430, 435, 440 Replaces: M1860T (2" O.D., .125" thick, .906" hole I.D.) USA made NOTE: 2 required per tractor; Sold individually. Knob fits: 330, 430, 435, 440 (For Throttle); 1010, 2010 Industrials (For Reversor Shuttle) Replaces: T10341 (7/16" X 14 NC) Throttle Knob fits: 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020, Replaces: R26670 NOTE: Plastic. $9.95 Throttle Speed Control Inner Lever Shaft & Guide fits: 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 7020, 7520 Replaces: R38376 (shaft), R38377 (guide), R26669, R26952, T15179 JDS1066 $34.95 Governor Spring / Speed Change Spring Fits: (A SN: 424025 - 583999), (AR & AO SN: 251486 & up), (B up to SN: 200999), BR, BO, H, Replaces: B273R (0.075" thick) USA made JDS1068 $34.95 Governor Spring / Speed Change Spring Fits: A SN: 584000 & up, G, 60, 70, 620, 630, 720, 730, Replaces: A1491R, A3408R (0.057" thick) USA made Throttle Spring Fits: H series Replaces: H404R USA made JDS2995 $17.95 NEW! Throttle / Governor Shutter Rod End Fits: A, B, D, G, GP, H series, (R as a speed / starter / choke rod end), Replaces: D157R (1.455" o/a length, 1/4" - 20 thread) USA made NOTE: Measure before ordering as there are 2 different lengths used on most models. This is the shorter length of the two. JDS2998 $17.95 NEW! Throttle / Governor Control Rod End Fits: A series SN: 477000 & up, B series SN: 60013 & up, G series SN: 7180 & up, H series, R, (50 up to SN: 5020083), 60 Rowcrop up to SN: 6029043, 60 Standard up to SN: 6042999, 70 up to SN: 7008356 gas, LP Replaces: D2887R (1.800" o/a length, 1/4" - 20 thread) USA made NOTE: Measure before ordering as there are 2 different lengths used on most models & this is the longer of the two. JDS908 $14.50 Upper Foot Throttle Spring Fits: H series Replaces: H286R (6-1/4" long) USA made NOTE: Primed green. JDS913 $15.50 Lower Foot Throttle Spring Fits: H series Replaces: H285R (5-3/16" long) USA made NOTE: Primed green. JDS823 $36.95 Speed Control Stop Knob Fits: R, 70D, 80, 720D, 730D, 820, 830 Replaces: B1951R (1/4"-20 NC) NOTE: Metal. JDS760 404 Order # JDS1070 JDS1470 $38.95 JDS2695 $12.50 Throttle Speed Control Plate w/ Linings Fits: 50, 60, 70, (520 up to SN: 5208099), 620 up to SN: 6213099, 720 up to SN: 7214899 Replaces: A4601R, AA6077R, R227852 NOTE: Does not fit diesels or 30 series. Throttle Speed Control Plate w/ Linings Fits: 520 SN: 5208100 & up, 530, (620 SN: 6213100 & up), 630, (720 SN: 7214900 & up), 730, Replaces: AF3847R, RE227867 NOTE: Does not fit diesels. NEW! Speed Control Rod Link End Joint Fits: 50 thru 730 gas, LP; 2510 thru 4030 gas, LP, diesel, Replaces: AA5302R USA made NOTE: See website for full listing. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fits: A SN: 584000 & up, (AO, AR SN: 272000 & up), B SN: 201000 & up, 50, 60, 70, 520, 530, 620, 630, 720, 730 Replaces: AB3579R (7-1/4" dia.) Description Order # Price Flywheel Cover Inspection Hole Plate................ JDS321..........$28.00 w/ Springs Clutch operating t-bolts, parts NOTE: (3) t-bolts used per tractor; Sold individually. Order # Price JDS1037 $32.50 EACH Fits: A up to SN: 647999, (AO, AR up to SN: 273079), Replaces: A135R (6-3/16" long, 1/2" dia.) JDS1040 $32.50 EACH Fits: A SN: 648000 & up, (AO & AR SN: 273080 & up), Replaces: A4031R (6-3/4" long, 9/16" dia.) JDS1029 $32.50 EACH Fits: B up to SN: 59999, Replaces: B147R (5-1/8" long, 7/16" dia.) JDS1031 $32.50 EACH Fits: B SN: 60000 - 95999, Replaces: B1361R (5-3/8" long, 7/16" dia.) JDS1033 $32.50 EACH Fits: B SN: 96000 - 200999, Replaces: B1856R (5-5/8" long, 7/16" dia.) JDS1035 $32.50 EACH Fits: B SN: 201000 & up, Replaces: B2353R (7-5/16" long, 7/16" dia.) JDS1042 $49.95 EACH Fits: G SN: 13804 & up, Replaces: F794R (7-5/16" long, 9/16" dia.) JDS1044 $32.50 EACH Fits: R, Replaces: R254R (8-5/8" long, 9/16" dia.) JDS2292 $32.50 EACH NEW! Fits: 50 SN: 5020400 & up, 520, 530 Replaces: B3278R, R47570 (6-3/4" long, 1/2" dia.) JDS1046 $32.50 EACH Fits: 60, 620, 630, Replaces: A4354R (6-7/16" long, 9/16" dia.) JDS1048 $32.50 EACH Fits: 70, 720, 730, Replaces: F1392R (5-9/16" long, 9/16" dia.) JDS1049 $49.95 EACH Fits: 80, 820, 830, (840 up to SN: 8400898) Replaces: R1859R (9-3/16" long, 9/16" dia.) T-Bolts Starter rod bushing Fits: B SN: 201000 & up, 50, 520 USA made Description Order # Price Starter Rod Bushing................................................ JDS1625....... $19.95 NOTE: Mounts on top of flywheel cover. Flywheel cover guards - USA made Order # Price JDS636 $124.95 Application JDS637 $124.95 JDS638 Slotted Hex Nuts only (Grade 5) 3 used per tractor; Sold individually $124.95 Fits: Early B SN: 60000 - 95999 (1939-40) 4 speed only; BO, BR (All years) Replaces: AB1856R JDS639 $124.95 MIS1123 $1.80 EACH MIS1129 $1.25 EACH MIS1134 $1.95 EACH Fits: B SN: 96000 - 200999 (1941-48) 6 speed Replaces: AB2933R JDS191 $149.95 NEW! Fits: G SN: 13000 & up Replaces: AF697R (For 7/16" dia. T-bolt) fits: B series, BO, BR, H, (50 up to SN:5020399), Replaces: AB4254R, B1363R, B3129R (7/16"-20 NF, Grade 5) (For 1/2" dia. T-bolt) fits: A up to SN: 647999, (AO, AR both up to SN: 273079), 50 SN: 5020400 & up, 520, 530 Replaces: A335R, AA4967R, B3279R, 14H994 (1/2" - 20 NF) (For 9/16" dia. T-bolt) fits: A SN: 648000 & up, (AO, AR SN: 273080 & up), G, R, 60, 70, 80, 620, 630, 720, 730, 820, 830, 840, Replaces: AD2850R, D2789R, R20228 (9/16" - 18 NF) Clutch operating t-bolts, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 405 Chassis parts Fits: A SN: 499000 - 583999 (1941-48) 6 speed, Replaces: AA3156R John Deere Fits: Early A SN: 477000 - 498999 (1939-40) 4 speed, AO, AR Replaces: AA2011R Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Flywheel cover plate All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Clutch pulley covers, parts cont... Clutch operating t-bolts, parts cont... Order # Price Application Washer JDS1626 $1.95 EACH Clutch Pressure Plate Spring Washer Fits: A series, B series, G series, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820 2-cyl., 830 2-cyl., 840 2-cyl. (.572" I.D. x .937" O.D. x 0.035 thick) USA made NOTE: Mounts between slotted adjusting nut & pressure plate, helps to alleviate jumpy clutch symptoms. Torque initially to 15 FT pounds, adjust as needed. 3 used per tractor; Sold individually. Order # Price JDS406 $35.75 JDS188 $35.00 JDS189 $35.00 JDS2273 $572.50 JDS1647 $64.85 Clutch shaft seal Fits: 70D, 80, 720D, 730D, 820 w/ Pony motor, Replaces: AF2167R (1.503" O.D., 1.000" I.D., .250" width) Description Order # Price Pony Motor Clutch Input Shaft Seal.................... ABC1630 .....$7.95 Clutch pulley covers, parts Order # Price JDS543 $38.95 JDS882 $14.95 JDS2242 $14.95 JDS2246 $14.95 JDS1599 $12.50 406 Description / Application Clutch Pulley Cover fits: A SN: 410000 & up (like original for A SN: 648000 & up); AO, AR SN: 250000 & up (like original for AO, AR SN: 273080 & up); G SN: 1000 & up (like original for G SN: G13804 & up); 60, 70, 70D, 620, 630, 720, 720D, 730, 730D Replaces: A272R, A1652R, F821R (12" dia.) NOTE: Has inward dimple to measure RPM. Clutch Pulley Cover Fits: B up to SN: 200999, BO & BR both SN: 325000 & up, Replaces: B164R (10" dia.) USA made Clutch Pulley Cover Fits: Styled B SN: 201000 & up, 50, 520, 530 Replaces: B2361R, B3764R (9" dia.) USA made Clutch Pulley Cover Fits: H Replaces: H345R (11-1/2" dia.) USA made Clutch Belt Pulley Fits: 620, 630, Replaces: AA6729R NOTE: Bushing, gear, sliding sleeve, spring clips, etc. are not included. Shipped bare. Clutch Adjusting Disc Fits: A up to SN: 647000, AO, AR both up to SN: 273079, Replaces: A20R NOTE: Made from ducitle iron. Will not crack under stress like grey iron and has significant tensile strength over the original! Clutch discs, parts Clutch Pulley Cover Retaining Spring w/ Rivet fits: A, G series, 50, 60, 520, 530, 620, 630, Replaces: A6121R (spring), 16H644 (rivet) Clutch Pulley Cover Retaining Spring w/ Rivet fits: B series up to SN: 200999, BI, BO & BR (all), Replaces: B141R, 16H648 (rivet) (2.873" o/a length, 0.997" wide) USA made Order # Price JDS2089 $164.95 Description / Application Clutch Drive Disc Fits: A series up to SN: 647999, (AO, AR up to SN: 273079), Replaces: A19R, AA232R, AA2279R, A2448R JDS079 $119.95 Clutch Drive Disc Fits: A SN: 648000 & up, (AO, AR SN: 273080 & up) Replaces: A4028R, AA4635R Clutch Pulley Cover Retaining Spring w/ Rivet fits: B series SN: 201000 & up Replaces: B2347R, 16H634 (rivet) (2.309" o/a length, 1.000" wide) USA made Clutch Pulley Cover Retaining Spring w/ Rivet fits: 70, 720, 730 gas, LP, diesel Replaces: F1391R, 16H644 (rivet) (2.579" o/a length, 1.040" wide) USA made Description / Application JDS1021 $174.95 Clutch Drive Disc Fits: B SN: 96000 - 200999 Replaces: AB2758R, AB3806R, Casting # B1849R STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS799 Price Description / Application $174.95 Clutch discs, parts cont... Order # Clutch Disc Facing fits: A, AO, AR, D SN: 109944 & up, G, GP, 60, 70, 620, 630, 720, 730, Replaces: C614R, R90215 (10" O.D., 6-3/4" I.D., .150" thick) NOTE: 2 used per tractor; Sold individually. JDS545 $42.50 EACH Clutch Disc w/ Bonded Lining Fits: A SN: 648000 & up, (AO, AR SN: 273080 & up), D, G, 60, 620, 630 (1 used per tractor); 70, 720, 730 (2 used per tractor), Replaces: AA6129R, AD752R, AD1027R (.393" thick) NOTE: Sold individually. JDS796 $54.95 JDS602 $14.30 EACH Clutch Disc Facing Fits: B up to SN: 201000, BO, BR Replaces: B158R, R90218 (7-7/8" O.D., .152" thick) NOTE: 2 used per tractor; Sold individually. Clutch Drive Disc Fits: 520, 530 Replaces: B3731R JDS605 $12.60 EACH Clutch Disc Facing Fits: B SN: 201000 & up, 50, 520, 530 Replaces: B2354R, R90220 (7" O.D., .160" thick) NOTE: 2 used per tractor; Sold individually. Clutch Drive Disc Fits: 620, 630 Replaces: A5642R JDS663 $58.50 Clutch Disc w/ Riveted Lining Fits: B SN: 201000 & up, 50, 520, 530 Replaces: AB3471R, AB4828R (.445" thick) NOTE: 1 used per tractor. JDS803 $54.95 Clutch Slider Disc Fits: 50, 520, 530 Replaces: B3127R (6.988" O.D., .250" thick) NOTE: 1 used per tractor. JDS2561 $54.95 JDS1027 $101.75 EACH $194.95 Clutch Drive Disc Fits: G series SN: 13804 & up Replaces: AF820R, Casting # F798R JDS801 $174.95 Clutch Drive Disc Fits: 50 Replaces: B3020R JDS080 $138.50 Clutch Drive Disc Fits: 60 Replaces: A4391R JDS020 $145.00 $124.95 Clutch Drive Disc Fits: 70, 720, 730 Replaces: F1228R JDS1017 JDS021 $59.95 $55.95 EACH Clutch Slider Disc Fits: A series SN: 648000 & up, (AR, AO SN: 273080 & up), G Replaces: AF1247R, F195R (.375" thick) NOTE: 1 used per tractor. Clutch Slider Disc Fits: 60, 620, 630 (1 used per tractor); 70, 720, 730 (2 used per tractor) Replaces: A4355R (.247 thick) NOTE: Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Chassis parts JDS478 $178.60 Clutch Slider Disc Fits: B SN: 201000 & up Replaces: AB4225R, B2358R (6.985" O.D., .312" thick) NOTE: 1 used per tractor. John Deere JDS805 Description / Application $10.25 EACH Clutch Drive Disc Fits: B SN: 201000 & up Replaces: AB3810R, B2463R JDS1023 Price JDS538 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Clutch discs, parts cont... Clutch Facings w/ Rivets Fits: H, Replaces: H342R, D1761R (rivet) (9 1/4" O.D; .160" thick) NOTE: Kit contains (2) facings & (12) rivets. No returns if broken. Clutch Disc w/Riveted lining Fits: R (2 used), 80 (3 used), 820, 830 2-cylinders, 840 (3 used) Replaces: AR403R, AR1052R, RE29785 (9.25" O.D., .372" thick) NOTE: Sold individually. Clutch discs, parts continue on next page 407 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Clutch discs, parts cont... Clutch discs, parts cont... Order # Order # Price JDS1025 $17.95 EACH Clutch Disc Facing Fits: R, 80, 820, 830 2-cylinders, 840 Replaces: R256R, R90221 (9.25" O.D., .156" thick) NOTE: 2 used per tractor; Sold individually. JDS880 $1.75 EACH Clutch Disc Adjusting Spring Fits: A series, G series, R, 60 thru 730 gas, diesel, Replaces: A352R USA made NOTE: 3 used per tractor; Sold individually. JDS1028 $2.75 EACH Clutch Disc Adjusting Spring Fits: B, 50, 520, 530 Replaces: B161R USA made NOTE: 3 used per tractor; Sold individually. ABC187 $9.95 JDS1887 $12.95 JDS1890 $14.95 JDS1893 $14.95 JDS3022 $6.95 JDS3026 $6.50 JDS3029 $5.75 408 Description / Application Price Description / Application JDS3033 $6.95 NEW! Clutch Pulley Brake Cover Gasket Fits: G series Replaces: F201R (11-1/2" long, 2-13/16" wide, 4 bolt holes) USA made JDS3036 $5.75 NEW! Clutch Pulley Brake Cover Gasket Fits: H series Replaces: H362R (5-1/16" long, 2-1/2" wide, 4 bolt holes) USA made JDS3039 $6.95 NEW! Clutch Pulley Brake Cover Gasket Fits: 50, (520 up to SN: 5208099) Replaces: B3467R (9-9/16" long, 3" wide, 4 bolt holes) USA made JDS3042 $6.95 NEW! Clutch Pulley Brake Cover Gasket Fits: (520 SN: 5208100 & up), 530 Replaces: B3980R (9-5/8" long, 3" wide, 4 bolt holes) USA made JDS3046 $6.95 NEW! Clutch Pulley Brake Cover Gasket Fits: 60, 620, 630 Replaces: A4367R (10-3/8" long, 3-1/4" wide, 4 bolt holes) USA made JDS3054 $6.95 NEW! Clutch Pulley Brake Cover Gasket Fits: R, 80, 820, 830, 840 (All w/ 2-cylinders), Replaces: R1468R (10-3/8" o/a length, 2-7/8" wide, 4 bolt holes) USA made JDS867 $32.50 EACH Clutch Dog fits: A, AO, AR, (D, DI SN: 109944 & up), G SN: 13804 & up, GP, W SN: 1098 & up, 60, 70, 620, 630, 720, 730 gas, diesel, Replaces: C74R NOTE: 3 used per tractor; Sold individually. NEW! Clutch Pulley Brake Cover Gasket Fits: A, AO, AR series Replaces: A420R (10-5/16" long, 2-3/4" wide, 4 bolt holes) USA made JDS2581 $8.50 EACH NEW! Clutch Pulley Brake Cover Gasket Fits: B series up to SN: 95999; BO, BR up to SN: 332799, Replaces: B173R (8-13/16" long, 3" wide, 4 bolt holes) USA made Clutch Dog Pin fits: A, (D SN: 30400 & up), (G SN: 13804 & up), GP, 60, 70, 80, 620, 630, 720, 730, 820 2-cyl., 830 2-cyl. Replaces: D355R (0.793" dia., 2.500" usable length) USA made NOTE: 3 used per tractor; Sold individually. Steel finish. JDS1160 $39.95 EACH Clutch Dog Fits: B up to SN: 200999; H series Replaces: B145R NOTE: 3 used per tractor; Sold individually. JDS2593 $8.50 EACH Clutch Dog or Hydraulic Breakaway Pin Fits: Early B series up to SN: 200999, H series Replaces: B146R, R43388 (0.433" dia., 2.343" usable length) USA made NOTE: 3 used per tractor; Sold individually. Belt Pulley Brake Lining Fits: A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840 Replaces: AB4748R, RE29790 NOTE: Asbestos free lining. Belt Pulley Brake Lining Kit w/ Rivets Fits: A series, (D SN: 109944 & up), W Power Units, G series, R, 60, 70, 80, 820 2-cyl., Replaces: D1592R, D1932R, R89780 (2 1/4" wide, 5" long) Belt Pulley Brake Lining Kit w/ Rivets Fits: B series, 50, Replaces: B166R, R227488; D1592R (rivet) (2" wide x 5" long) Belt Pulley Brake Lining Kit w/ Rivets Fits: H series Replaces: H360R, R90226; D1592R (series) (1-3/4" wide x 3-1/4" long) NEW! Clutch Pulley Brake Cover Gasket Fits: B series SN: 96000 & up; BO, BR SN: 332800 & up, Replaces: B1855R (8-1/2" long, 2-3/4" wide, 4 bolt holes) USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS1165 $39.95 EACH JDS2601 $9.95 EACH JDS3006 JDS3010 $268.50 $19.95 Clutch Dog Pin Fits: B SN: 201000 & up; 50, 520, 530 Replaces: B2352R (0.431" dia., 2.000" usable length) USA made NOTE: 3 used per tractor; Sold individually. NEW! Woven Engine Clutch Disc (New, not rebuilt) fits the following w/out live PTO: M, MT, 40, 320, 330, 420, 430, 435, 440 series, Replaces: AM649T, AM2575T, AM3183T, AN192656 (10" O.D., 1-3/8" spline I.D., 10 splines) NEW! Engine Pressure Plate (Rebuilt) Fits the following w/out live PTO: M, MC, MT, 40, 320, 330, 420, 430, 435, 440 Replaces: AM227T, AM650T, AM2576T (10" O.D., 3 springs) USA made NEW! Clutch Kit fits the following w/ out live PTO: M, MT, 40, 320, 330, 420, 430, 435, 440, Replaces: AM2575T (clutch), AM2576T (pressure plate), AM3983T (throw-out bearing) (10" O.D., 10 splines, 1-3/8" spline I.D.) NOTE: Includes rebuilt pressure plate, new woven clutch disc, and throw-out bearing. Clutch Throw-Out Bearing Fits: L, LA, M, MT, 40, 320, 330, (420, 430, 435, 440 1010, all single clutch), 2510 Power Shift, 2520 Power Shift, 3020 Power Shift, 4000, 4010, 4020, 4230 Power Shift, 4240 Power Shift, 4320, 4430 Power Shift, Combines: 3300 - 7720, Replaces: AL2116T, AM3983T, AR41942 (2.078" I.D., 0.801" thick, 3.269" face diameter) NOTE: Measure before ordering. ABC412 $5.65 NEW! Clutch Alignment Tool Fits: L, LA, M, MT, 40, 320, 330, (420, 430, 435, 440 w/ single clutch) (1-3/8" spline dia., 10 splines, .675" pilot dia.) NOTE: Check clutch spline dia. before ordering. ABC1937 $34.95 Throw Out Bearing fits: Some (420 SN: 100000 & up, 430, 435 all w/ dual clutch), 1010, Early 1020, 1520, 2010, 2020, 2030, 2240, 2440, 2630, 2640 & Industrials, Replaces: AT10500, AT17464 USA made NOTE: Visit our website for additional application & serial number information. Price Description / Application Clutch Lever Pivot Bolt fits: A, BO, BR, (D SN: 114692 & up), G, (GPWT SN: 404810 & up), R, W, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces: R121197 (4-1/4" long, .750" O.D. - .625" O.D.) USA made $17.50 JDS891 $7.85 JDS881 $17.50 JDS893 $7.50 JDS890 $8.95 JDS1902 $8.95 EACH Clutch Linkage Pin fits: A, D, G, R, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 2 cyl., Replaces: D1994R (9/16" dia.) NOTE: 2 required per tractor; Sold individually. This clutch linkage pin is 1/16" oversized to compensate for wear. Use 9/16" drill to ream original holes. JDS1900 $5.95 EACH Clutch Linkage Pin fits: B, H, 50 Replaces: B178R (1/2" dia.) NOTE: 2 required; Sold individually. This clutch linkage pin is 1/16" oversized to compensate for wear. Use 1/2" drill to ream original holes. JDS954 $10.75 Clutch Pedal Return Spring fits the following w/ syncro-range: 2510, 3010, 3020 up to SN: 122999 (Rowcrop, Standard, No Utility), 4010, 4020 up to SN: 200999, Replaces: R26833 (2.938" long, .938" O.D.) USA made JDS956 $11.75 Clutch Pedal Return Spring fits the following w/ Powershift: 2510, 2520, 3020 except Utility, 4000, 4020, 4520; Fits the following w/ syncro or quad range: 4000, 4020 SN: 201000 & up, 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 8430, 8630, Replaces: R33179, R43684 (7.520" long, .1.161" O.D.) USA made JDS891 $7.85 Clutch Pedal Bushing fits: 4030, 4040, 4050, 4055, 4230, 4240, 4255, 4440, 4455, 4430, 4555, 4755, 4955, 4630, 4640, 4650, 4840, 4850, 8020, 8430, 8630, 8440, 8640, 8450, 8650, 8560, 8850, Replaces: A1197R, R51192 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Clutch Lever Pivot Bushing Same as JDS887 Replaces: A1197R Clutch Lever Pivot Bolt fits: B, H, 50, Replaces: B180R, R121198 (3-7/16" long, .650" O.D. - .530" O.D.) USA made Clutch Lever Pivot Bushing Fits: B, H, 50, Replaces: B177R (1.215" long, .750" O.D., .690" I.D.) Clutch Pedal Return Spring fits: Styled L SN: 640000 & up, LA, LI, Replaces: L4223T (5-1/4" o/a length) USA made 409 Chassis parts ABC496 $169.75 Clutch Dog Fits: B SN: 201000 & up, 50, 520, 530 Replaces: B2351R NOTE: 3 used per tractor; Sold individually. Order # JDS887 John Deere JDS3013 $99.95 Description / Application Clutch discs, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Clutch discs, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Countershaft idler gear Description John Deere Order # Order # Price JDS826 $68.50 JDS827 $94.95 Price Countershaft Idler Gear.......................................... JDS016.........$85.00 NOTE: 20 & 30 teeth. Transmission parts Order # Price JDS2312 $164.95 Description / Application 2nd & 5th Gear Fits: 720, 730 Replaces: F2610R NOTE: 30 teeth. JDS2314 JDS1263 Gear Shift Lever Washer & Snap Ring Fits: L, LA, M, MT, 40, 320, 330, 420, 430, 435, 440; 820 3-cyl. - 3150 Replaces: L4027, L4035 NOTE: Retains gear shift lever into housing. $13.45 Gear shift knobs, boots Order # $285.00 JDS507 $54.30 Transmission Pickup Magnet Fits: 820 3-cyl. - 9620T including 2510 6030 (All using filter screen JD: R53169, R68836 - - not supplied by STP, Inc.) USA made NOTE: Aftermarket part only. Collects transmission metal shavings out of tractor's hydraulic system. ABC1579 $13.90 Transmission Seal Fits as a front wheel assist yoke seal: 4050 thru 7930; Fits as a planet pinion carrier seal: 8130 thru 8530; Fits as a transmission oil pump seal: 8100 thru 8520T Replaces: RE32442, RE57484 (2.375" I.D., 3.355" O.D., .475" wide) 410 $1.49 EACH Gear Shift Lever Fits: 420 slant dash (SN: 125000 & up) EXCEPT Crawler, 430 (All), 435, 440 Replaces: M4284T (7/16"-14 UNC thread pitch) USA made ACS254 Price Transmission Rear End Drain Plug Washer Fits: 300 - 8630, Replaces: A4827R (1.257" O.D., 0.058" thick, 1.002" hole I.D.) USA made NOTE: Aluminum finish. Multiples used per tractor; Sold individually. Description / Application JDS586 $7.70 Gear Shift Knob fits: Styled A SN: 648000 & up, AO, AR, (Styled B SN: 201000 & up), Styled G SN:13000 & up, R, 50, 60, 70, 70D, 80, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830, 840 2-cyls., Replaces: AP17808, R283R (1.71" dia., 3/8"-24 NF) ABC362 $5.50 Gear Shift Knob (Bakelite) fits: 40, 320, (420 up to SN: 125000); Also fits M, MC, MI, MT, 40, 320, 330, 1010, 1020, 1520, 1530, 2020, 2030, 3010 as a Direction Reverse Knob; Also fits M, MI, MT, 40, 420, 430, 435, 440 as a Touch-O-Matic Knob, Remote Control Knob, Hydraulic Knob, Replaces: M526T (3/8"-24 NF, 1.250" O.D.) NOTE: This knob is used on many other tractors. JDS560 4 Speed $17.95 Syncro Range Top Transmission Shaft Fits: 600, 4000, 4020 Replaces: R33384 ABC2026 Gear Shift Lever fits: A (SN: 648000 and up), 60, 60 Standard (SN: 604300 and up), 620, 630, Replaces: A4010R, A4565R (3/8"-24 NF thread pitch) USA made NOTE: JDS586 knob sold separately. Transmission Gear Shift Lever Fits: 2520, (3020 SN:123000 & up), 4000, (4020 SN:201000 & up), 4320 (All w/ Syncro Range transmission), Replaces: R46285 (16-1/2" long) $285.00 Syncro Range Top Transmission Shaft Fits: 500, 500A, 500B, 500C, 2510, 2520, 3020, Replaces: R33512 Description / Application JDS1931 $89.95 $109.95 2nd & 5th Sliding Gear & Reverse Fits: 720, 730 Replaces: F2619R NOTE: 18 teeth. JDS1266 Chassis parts Gear shift levers, part Fits: B SN: 201000 & up, 50; Will work on 520, 530, Replaces: B2417R JDS562 5 Speed $17.95 Gear Shift Knob Fits: Late 420 SN: 125000 & up, 430, 435, 440 JDS560 Replaces: M4337T JDS562 Replaces: M4338T (7/16" - 14 UNC thread pitch) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS917 $24.95 JDS493 $9.95 ACS130 $8.70 JDS1024 $21.10 JDS1705 $19.95 Description / Application Gear Shift Boot Fits: H series SN: 10000 & up Replaces: AH822R, H723R USA made NOTE: Leather. Gear Shift Boot fits: L, LA, M, MC, MI, MT, 40, 320, 330, 420, 430, 435, 440, 1010, Replaces: AL4022T (2-1/2" bottom I.D., 9/16" hole I.D. & 13/16" - 7/8" hole O.D.) NOTE: Rubber. Gear Shift Boot fits: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 2955, 300B, Replaces: L31055 (2-1/4" bottom I.D., 7/16" hole dia.) NOTE: Rubber. Gear Shift Ball fits: A SN: 499000 & up, B SN: 150000 & up, H SN: 10000 & up, 50, 60 Rowcrop, (60 Standard SN: 604300 & up), 520, 530, 620, 630, 720, 730 Replaces: H717R USA made NOTE: Bare steel. Order # Price JDS301 $49.50 JDS1363 $48.15 JDS564 $13.45 JDS375 $49.50 JDS305 $49.50 Just like original • All new material • Steel spokes Order # Price JDS240 $49.50 Steering Wheel fits: Unstyled A up to SN: 476999, (Unstyled AR, AO up to SN: 271999), D SN:109944 - 143800, G up to SN: 7099, Replaces: AA380R (18" dia., stepped hub, 3/4" - 7/8" shaft, 3 FLAT spokes) JDS341 $49.50 JDS303 $49.50 Steering Wheel fits: Early Styled A SN: 477000 - 498999, (AR, AO SN: 272000 & up), D SN: 143800 - 148871 & G SN: 7100 12999, Replaces: AA380R (18" dia., stepped hub, 3/4" - 7/8" shaft, 3 ROUND spokes) JDS284 $49.50 JDS229 $49.50 Description / Application Steering Wheel fits: A SN: 499000 & up (1941 & up), B SN: 230044 & up (1949 & up), G SN: 13000 & up (1941 & up), D SN: 148872 & up (1941 & up), R, 50, 60, 70, 80, 520 up to SN: 5208099, 620 up to SN: 6213099, 720 up to SN: 7214899, 820 up to SN: 8203099 (2-cyl. w/ 3 spokes), 840 (2cyl. up to SN: 8400199), Replaces: AA380R (17-5/8" dia., keyed hub, 3/4" - 7/8" shaft, 3 spokes) Steering Wheel Fits: 70, 720 up to SN: 7214899, 80, 820 up to SN: 8203099 w/ manual steering, R w/ manual or power steering Replaces: AR505R (20" dia., keyed hub, 3/4" - 7/8" shaft, 4 spokes) Steering Wheel Starter Crank Fits: A SN: 584000 & up, B SN: 201000 & up, 50, 60, 70 gas, 520 up to SN: 5208099, 620 up to SN: 6213099, Replaces: AB3580R USA made Steering Wheel Plate (For Power Steering) Fits: 50, 60, 70, (520 up to SN: 5208099), 620 up to SN: 6213099, 720 up to SN: 7214899, 80, 820 up to SN: 8203099, Replaces: F1744R NOTE: JDS564 plate will fit JDS229 & JDS301 steering wheels & installs under JDS519 steering wheel nut. Steering Wheel Fits: Unstyled B up to SN: 59999, (BR, BO up to SN: 329000), Replaces: AA380R (16" dia., stepped hub, 3/4" - 7/8" shaft, 3 FLAT spokes) Steering Wheel Fits: Early Styled B SN: 60000 - 95999, (BR, BO SN: 329000 & up) Replaces: AB218R (16" dia., stepped & keyed hub, 3/4" - 7/8" shaft, 3 ROUND spokes) Steering Wheel Fits: B SN: 96000 - 230043 Replaces: AA380R (16" dia., tapered & keyed hub w/ rounded edge, 3/4" - 7/8" shaft, 3 spokes) Steering Wheel Fits: H Replaces: AH675R (15" dia., keyed hub, 11/16" - 3/4" shaft, 3 spokes) JDS997 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $119.95 Steering Wheel Fits: Unstyled L, Styled L, LA Replaces: AL2180T (15" dia., tapered & keyed hub, 11/16" - 3/4" shaft, 3 COVERED TO CENTER spokes) NOTE: Exact of original. Steering wheels, parts continue on next page 411 Chassis parts Steering wheels, parts Description / Application John Deere Gear Shift Ball fits: G, (H up to SN: 9999), 70, Replaces: F288R USA made NOTE: Bare steel. Steering wheels, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Gear shift knobs, boots cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Just like original • All new material • Steel spokes Order # Price JDS282 $49.50 JDS336 $49.50 Description / Application Order # Price GTS001 $49.50 MIS103 $10.75 Steering Wheel Fits: L, LA, LI (Late 1944 & up), M, MI, MT, Early 40, Replaces: AL2180T (15" dia., tapered, keyed & stepped hub, 11/16" - 3/4" shaft, 3 bare spokes) Steering Wheel Fits: Late 40, (320 up to SN: 325000), 420 up to SN: 124999, Replaces: AM2600T (17-5/8" dia., tapered, keyed & stepped hub, 11/16" - 3/4" shaft, 3 spokes) JDS286 $64.50 $74.95 Steering Wheel Fits: 520 SN: 5208100 & up, 530, (620 SN: 6213100 & up), 630, (720 SN: 7214900 & up), 730 gas, diesel, (820 2-cyl. SN: 8203100 & up), 830 2-cyl.; Combines: 45, 55, 95, 105 Replaces: AF3856R (18" dia., 36 splined hub, 7/8" shaft, 3 COVERED TO CENTER spokes) NOTE: Painted gloss black. Center emblem not included. JDS309 $59.95 Steering Wheel Fits: 1010, 2010, 2510, 3010, (Early 3020 up to SN: 122999), 4010, (Early 4020 up to SN: 200999), 4520, 4620, 5010, 5020, 6030, 7020, 7520; New Generation tractors using 16" steering wheel w/ horizontal spokes Replaces: AR26625, AT11172 (16" dia., splined hub, 36 splines, 7/8" shaft, 3 COVERED TO CENTER spokes) NOTE: Painted gloss black. Center emblem not included. JDS539 412 $59.95 Description / Application Steering Wheel (For Garden Tractors) Fits: 110, 112, 120, 140 (1963-68) Replaces: M40008, M43800, M83501, M85416 (13" dia., splined hub, 40 splines, 11/16" hub dia., 3 COVERED TO CENTER spokes) NOTE: If steering wheel cap is needed - order JDS337 (Sold separately). Steering Wheel Spinner Fits: John Deere models NOTE: Aluminum. Steering wheel nuts Steering Wheel Fits: 320 SN: 325000 & up, 330, (420 SN: 125000 & up w/ slant steering), 430, 435, 440, (840 2 cyl SN: 8400200 & up) Replaces: AM3914T (18" dia., keyed hub, 11/16" - 3/4" shaft, 3 COVERED TO CENTER spokes) NOTE: Center emblem is not included JDS399 John Deere Chassis parts Steering wheels, parts cont... Steering wheels, parts cont... Steering Wheel (Dished) Fits: 820 3-cyl., 830 3-cyl., 1020, 1520, 1530, 2020, 2030, 2120, 2350, (2440 up to SN: 340999), 2520, 2550, 2630, (2640 up to SN: 340999), 2750, 2950, (3020 SN: 123000 & up), 3150, 4000, (4020 SN: 201000 & up), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces: AL28457, AR78405, T22875 (16" dia., 36 splines, 7/8" splined hub) NOTE: Painted gloss black. Center emblem not included. Order # Price JDS877 $2.70 Fits: A, B, D, G, R series, 50 up to SN: 5020399, 60 up to SN: 6036999, 70 up to SN: 7012999 Standards, Orchards; 80, 820, 830 2-cyl. (All w/ manual steering); (820 SN: 8203100 & up), 830 2-cyl. (All w/ power steering), Replaces: 14H402, 14H798 (3/4"-16 NF x 5/8" tall) JDS519 $14.95 Fits: 50 SN: 5020400 & up, 60 SN: 6037000 & up, 70 SN: 7013000 & up, 520 up to SN:5208099, 620 up to SN: 6213099, 720 up to SN:7214899, 80, 820 up to SN: 8203099, (840 2 cyl up to SN: 8400199 w/ power steering), Replaces: F1745R (3/4"-16 NF x .859" tall) NOTE: Stainless steel. ACS136 (Black) $5.25 FDS197 $6.45 (Chrome) ACS136 JDS879 FDS197 $2.45 ABC502 $2.50 IHS685 $2.95 Application Fits: H series, L, M series, 40, 62 series, 320 up to SN: 325000 Replaces: AL2315T (5/8"-18 NF x .859" tall) ACS136: USA made FDS197: Imported Fits: H, M series, 40, 320 up to SN: 325000, 420 up to SN: 124999 Replaces: 14H398, AL2315 (5/8"-18 NF x .550" tall) Fits: 320 SN: 325001 & up, 330, 420 SN: 125001 & up, 430, 435, 440, 840 SN: 8400200 & up, Replaces: 14H866A (5/8"-18 NF x .381" tall) Fits: 520 thru 830 2-cyl. New Generation: 820 3-cyl. - 50 series Replaces: 14H904 (3/4"-16 NF x .444" tall) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS564 $13.45 JDS337 $53.95 JDS338 $53.95 JDS340 $53.95 JDS3143 $28.50 (For Manual Steering) Fits: 1010, 2010, Replaces: AL155227, AT12678 USA made NOTE: Also used on 110, 112 Lawn & Garden tractors. Will fit GTS001 Steering Wheel. (For Power Steering) Fits: 1010, 2010, 3010, 4010, 5010, 8010, 8020 Replaces: AL155227, R26673 USA made Price JDS898 $14.95 JDS900 $14.95 JDS902 $14.95 Steering Shaft Bushing Fits: 530, 630, 730, Replaces: R20370R (1" long, 1" O.D., .880" I.D.) NOTE: 3 used per tractor - 2 used at dash & 1 used at front steering shaft support above radiator; Sold individually. JDS1071 $19.95 Steering Worm Shaft Bearing Fits: A series, (AO, AR up to SN: 281999), G series, Replaces: JD7205 (.572" wide, 1.859" O.D., 1.225" I.D.) NOTE: 2 used per tractor; Sold individually. ABC558 $14.95 Steering Worm Shaft Bearing Fits: B series SN: 60000 & up; The following w/ manual steering: 50, 520, 530 Replaces: JD7396 (1.700" O.D., 1.197" I.D., .455" wide) NOTE: 2 used per tractor; Sold individually. JDS2966 $13.50 ABC2962 $8.35 (For Manual Steering) Fits: 1020, 2020, 2510, 2520 Replaces: AL155227, R34324 USA made (For Power Steering) Fits: 820 3-cyl, 830 3-cyl., 1020, 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020, Replaces: AL118173, AL155227, R45792 USA made NEW! Steering Wheel Cap Fits: John Deere models (1957 & up) Replaces: AL155227 NOTE: See website for all applications. Steering shaft parts Order # JDS824 JDS1184 Price $64.95 $22.50 Description / Application Steering Tube / Shaft Repair End Fits: M, MI, MT, 40, 420, 430, 435, 440 (.187" keyway, .750" bore, 2.025" long) USA made NOTE: Repairs ends when keyway strips out. Must be welded to existing steering shaft. Description / Application $14.95 Steering Pin Fits: M, MI, MT, 40, 320, 330, 420, 430, 435, 440, 1010, Replaces: AM1514T (.405" bottom O.D., 1" tall) USA made NOTE: Welds into existing lever shaft. Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Steering Shaft Bushing Fits: A series SN: 460000 & up, G series SN: 47996 & up, 60, 70, 620 Rowcrop, 720 Replaces: A1910R (1.735" long, 1" O.D., .935" I.D.) Steering Shaft Bushing Fits: B series SN: 201000 & up, R, 50, 80, 520, 620 Orchard, 820, 830 Replaces: B37R (1.745" long, .935" O.D., .880" I.D.) Steering Shaft Bushing Fits: Some 40V, W, S, T, U series, Early 320, Early 420, Replaces: AM1830T, M2757T (.989" long, .750" O.D., .065" thick) NEW! Steering Worm Shaft Race Fits: M, MI, (40 Standard up to SN: 69403), (40 Utility up to SN: 63119) Replaces: AT22586, M718T (1.717" O.D., 1.495" I.D., 0.328" wide) USA made NOTE: 2 used per tractor; Sold individually. NEW! Chrome Steel Ball Kit (For Steering Worm Shaft) fits: M, MT, 40, 320, 330, 420, 430, 435, (440 manual steering), 1010; Also fits 2010 thru 9620T in numerous applications, Replaces: M719T, R26552 (5/16" chrome steel, Grade 25) USA made NOTE: Priced & sold as 11-piece kit; 2 kits used per tractor. 413 Chassis parts $53.95 Steering Wheel Plate (For Power Steering) Fits: 50, 60, 70, (520 up to SN: 5208099), 620 up to SN: 6213099, 720 up to SN: 7214899, 80, 820 up to SN: 8203099, Replaces: F1744R NOTE: Fits JDS229, JDS301 steering wheels & installs under JDS519 steering wheel nut. Order # JDS904 John Deere JDS339 Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Steering shaft parts cont... Steering wheel caps All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Order # ABC1417 Price Order # Description / Application $37.45 Price Description / Application IHS740 $223.35 Power Steering Priority Flow Control Valve (To run power steering systems) Fits: John Deere models w/ LIVE hydraulics (1/2" NPT inlet, 3/8" NPT return, 1/2" NPT to remote cyls.) USA made NOTE: Eliminates belt driven pump, pulleys & brackets. Enables you to use your hydraulic pump to operate the power steering. Is preset at 1500 PSI & 8 gpm. Adjust to your application. ABC3000 $8.95 JDS490 $10.00 Power Steering Pump Pulley Fits: John Deere models (5" O.D., 0.675" bore, 1/8" keyway, 0.9715" total width for 1/2" belt) USA made ABC1414 ABC1419 $48.75 Power Steering Pump Port Block (For tractors using Eaton style pump w/ separate reservoir) Fits: John Deere models Replaces: Eaton 20925, AG33547A USA made $4.95 Bolt (For ABC1414) Replaces: Eaton 14126 USA made NOTE: Yellow zinc; Grade 8. IHS555 Char-Lynn Power Steering Torque Generator w/out Port Block Fits: John Deere models (7/8" shaft) $69.95 Port Block only (For IHS555 Generator) USA made NOTE: For IHS555 torque generator. ABC380 (Original) ABC497 (Economy) 414 Power Steering Hole Plug Fits: 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, Replaces: F1676R (2-1/2" O.D.) NOTE: Metal. Tie rod parts Order # Price JDS835 (Inner) $119.95 JDS837 (Outer) $146.80 JDS815 $16.65 FDS315 $16.65 IHS555: Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM; Recommended Fluid Input - 3 to 4 GPM IHS673 NEW! Power Steering Pump Outer Bearing fits: 50 thru 840-2 cyl. Replaces: JD7142 (0.787" I.D., 1.850" O.D., 0.551" wide) NOTE: Sealed bearing. $730.50 John Deere Chassis parts Power steering parts cont... Power steering parts $18.25 ABC497: (2-5/8" o/a length) USA made Tie Rod Bar Fits the following w/ factory square tube wide front axle: 520, 530, 620, 630, 720, 730 JDS835: Replaces: AF3206R, F3624R (L/H thread, 16" long; 6 vertical holes) JDS837: Replaces: AF3207R, F3625R (R/H thread, 17-3/4" long; 7 horizontal holes) $148.50 Char-Lynn Power Steering Slip Fit Coupler (For IHS555 Generator) ABC380: (3-3/8" to 3-1/2" adjustable length) USA made Description / Application Tie Rod End (Threaded) Fits: M w/ standard adjustable front axle, 40, 320, 330, 420, 430, 435, 440, some 1010 as Inner Tie Rod End; Fits: M w/ standard non-adjustable front axle, MI as Outer Tie Rod End, Replaces: AM498T, AM496T (3.187" from threaded end to grease zerk, .687" dia. RH thread) Inner Tie Rod End (Threaded) Fits: M w/ standard non-adjustable axle as Inner Tie Rod End; 420, 430 as a power steering cylinder end only Replaces: AM497T, AM499T (.687" - 18 LH thread, 4.00" to center of post) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS819 $99.65 JDS791 JDS793 $30.75 $30.75 JDS052 $24.95 JDS053 $39.95 JDS2376 $34.95 Tie Rod End fits: 40 w/ standard adjustable front axle, 320, 330 w/ standard adjustable front axle, 420, 430 w/ standard adjustable front axle, Early 1010 Single Rowcrop w/ adjustable front axle up to SN: 42000 Replaces: AM2001T, AM3951T (.608" rod dia., 11.125" from grease zerk to end, 1/2" dia. RH thread) Short Tie Rod End fits the following w/ factory square tube wide front axle: 520, 530, 620, 630, 720, 730; Also fits the following Standard as a Tie Rod End or Drag Link End: 620, 630, 720, 730, 820 2-cyl., 830 2-cyl., Replaces: AF3178R, AR21945 (3.350" from threaded end to grease zerk 11/16" x 18 LH thread) Short Tie Rod End (RH Thread) Fits the following w/ factory square tube wide front axle: 520, 530, 620, 630, 720, 730; Also fits the following Standard as a Tie Rod End or Drag Link End: 620, 630, 720, 730, 820 2-cyl., 830 2-cyl.; Serviceable for 2010 utility, Replaces: AF3177R, AR21944, (Serviceable for AT13971) (3.350" from threaded end to grease zerk 11/16" x 18 RH thread) Tie Rod Boot fits: M series, 40, 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 8020, Replaces: M648T (1.500" base, .735" tall, .550" hole) Inner Tie Rod End fits the following w/ factory non-adjustable axle: 300B, 301A, 302, 302A, 310, 380, 400, 401, 401C, 480, 480A, 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320; Fits the following w/ adjustable axle: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 Replaces: AR27351 (.875" dia., RH thread, 3.875" threaded end to grease zerk) Outer Tie Rod End fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 Replaces: AR51584 (1" dia. w/ (10) 3/8" holes, 11-3/4" long) Drag Link (Tie Rod) Dust Cover Fits: AW, AWH, BW, BWH, BW40, BWH40, (GPWT SN: 400000 - 404809), GH, GW, HW, HWH, 50 w/ Early adjustable & 38" fixed tread wide front, 60 Highcrop & 38" fixed tread wide front (All with round drag link), Replaces: C1400R, C1401R, AC352R, AR49878 (4.075" o/a length, 2.625" width, hole tapers 0.435" to 0.585") NOTE: 4 used per tractor; Sold individually. Price Description / Application $3.50 Tie Rod Boot Fits: Same as JDS052, JDS053 Replaces: R28019, R40589 Universal Tie Rod Boot (Base x Height x Hole I.D.) NOTE: Specify size when ordering. ABC368 ABC369 ABC371 ABC370 FDS336 FDS337 ABC368 $3.35 (1.675" base, .900" tall, .625" hole) ABC369 $2.95 (1.575" base, .600" tall, .650" hole) ABC371 $3.25 (1.300" base, .965" tall, .500" hole) ABC370 $3.50 Fits: 2510 thru 4320 & 4055 thru 4455 (1.800" base, .765" tall, .740" hole) FDS336 $3.50 (1.200" base, .475" tall, .500" hole) FDS337 $3.95 (1.450" base, .600" tall, .550" hole) Seat pan, parts Order # Price FDS067 $48.50 ABC372 $18.30 JDS968 $79.29 JDS607 $17.90 JDS662 $37.75 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Seat Pan (9 Hole) Fits: A, AR, B, BR, D, G, H series Replaces: AD1606R (19" dia.; 5/8" center bolt hole) NOTE: Steel, 9 hole, bolt down, non-flip back. Chassis parts $3.95 Order # ABC370 John Deere JDS736 Description / Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Tie rod parts cont... Tie rod parts cont... Seat Repair Kit w/ Rivets (For FDS067 Seat Pan) (5-1/2" O.D.; 5/8" center bolt hole) USA made Seat Channel Fits: A series up to SN: 583999, B series up to SN: 200999, G series up to SN: 25999 Replaces: A222R USA made Seat Support Channel Pin Fits: A, AO, AR, B, BO, BR, D, G, GP Replaces: C1980R USA made Seat Spring Coil Fits: A, AO, AR, B, BO, BR, G, GP, GW, H, HN, HNH (All w/ original John Deere pan seat), Replaces: A618R Seat cushions, parts continue on next page 415 JDS705 JDS836 Price NOTE: Cushioned seats were black up to the beginning of the Description / Application year 1957. At this time both black & yellow cushions were $19.95 Seat Spring Bolt w/ Nut (For JDS662 Seat Spring Coil) fits: A up to SN: 583999, (AO, AR SN: 250000 - 271999), B up to SN: 200999, G up to SN: 25999, Replaces: A619R (bolt), 14H480R (nut) (5/8" x 9", square head, Grade 5) Seat Spring Bolt w/ Nut Fits: H, HN, HNH, HW, HWH Replaces: H373R JDS311 available. Order # JDS275 (Yellow vinyl) Price $18.95 Seat Clamp Nut w/ Spacer Fits: A, (AO, AR SN: 250000 - 257960), B, D, G, GP, H series (All w/ pan seat) Replaces: D1797R JDS276 (Black vinyl) $49.65 JDS277 (Yellow vinyl) $29.95 JDS278 (Black vinyl) $29.95 JDS269 (Yellow vinyl) $68.95 JDS270 (Black vinyl) $68.95 JDS488 (Yellow vinyl) $84.95 JDS497 (Black vinyl) $64.90 Seat frame, parts - USA made Order # Price JDS379ASY $259.95 Description / Application Seat Frame Assembly (Frame, Back, Latch) Fits: M, MC, MI, MT Replaces: M358T, M359T, M360T, AM476T (seat frame), M1501T, AM1956T $124.95 Seat Frame Back only Fits: M, MC, MI, MT NOTE: Must be riveted or bolted to original seat. JDS377 JDS378 $124.95 Seat Frame Base w/ Toolbox Fits: M w/ Touch-O-Matic up to SN: 46204, M w/out Touch-O-Matic Replaces: AM477T NOTE: Powder coat green. $62.50 Seat Frame Base w/out Toolbox Fits: M w/ Touch-O-Matic SN: 46205 & up, Replaces: AM1579T NOTE: Powder coat green. JDS231 416 $19.95 Seat Latch Assembly Fits: M series, 40, 320, 330, 420, 430, 435, 440, Replaces: M358T, M359T, M360T, M1501T Description / Application $49.65 $9.95 John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Order # JDS230 Chassis parts Seat cushions, pads Seat pan, parts cont... Bottom Seat Cushion Fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 435, 440 JDS275 Replaces: AM3463T JDS276 Replaces: AM1839T (18" L x 16" W) USA made Back Rest Seat Cushion Fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 435, 440 JDS277 Replaces: AM3462T JDS278 Replaces: AM339T (Overall length = 18" L x 5-1/2" W, Bolt pattern: 16" x 1-1/2") USA made Bottom Seat Cushion (Wood bottom w/ original style springs & steel corner protectors) Fits: A, AR, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840 Standard JDS269 Replaces: AF3268R, AR26932, AR30181 JDS270 Replaces: AB4035R, AR30180 (19-1/2" L x 14-3/4" W x 5" H) Bottom Seat Cushion (Wood bottom w/ original style springs & steel corner protectors) fits the following w/ FloatRide seat: 50, 80, 520, 530, 620, 630, 720, 720D w/ Pony start, 730, 730D w/ Pony start, 820, 830 w/ Pony start, 840 w/ Pony start, Replaces: AF3270R (21" L x 14-1/2" W x 4" H) Bottom Seat Cushion (Wood bottom w/ foam cushion) Fits: Same as JDS488 Replaces: AF3096R (21" L x 14-1/2" W x 4" H) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS487 (Yellow vinyl) JDS496 (Black vinyl) JDS271L (Yellow vinyl) Price $84.95 $54.50 $45.95 $45.95 JDS271N (Yellow vinyl) $45.95 Bottom Seat Cushion (Wood bottom w/ original style springs & steel corner protectors) fits: 720D, 730D, 830, 840 (All w/ Float-Ride & Electric start) Replaces: AR20238R (21-3/4" L x 14-1/2" W x 5" H) NOTE: New & improved! Bottom Seat Cushion (Wood bottom w/ foam cushion) Fits: 720D, 730D, 830, 840 (All w/ Float-Ride & Electric start) Replaces: AR20237R (21-3/4" L x 14-1/2" W x 4" H) Order # Price MIS006JD $28.50 MIS006GY $28.50 MIS006BK $29.95 Back Rest Seat Cushion, Steel Back w/ Brass Rivets Fits: A, AR, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840 JDS271L Replaces: AR21966 JDS272L Replaces: AB3624R, AR21965 (16-1/2" bolt spacing, 6" H) NOTE: Order JDS271L or JDS272L if seat frame has open back as pictured below: Description / Application Yellow Tractor Seat Pad Fits: 19" Pan (side to side) (Foam pad, drawstring) USA made Yellow & Green Tractor Seat Pad Fits: 19" Pan (side to side) (Foam pad, drawstring) USA made Black Tractor Seat Pad Fits: 21" Pan (side to side) (Foam pad, drawstring) USA made Seat Cushion Set (Metal Back) (Bottom, Lower, Upper Back Rests) Fits tractors w/ 3-piece seat: 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520 Replaces: TY24856, TY26545 Description $45.95 JDS273 (Yellow vinyl) $35.95 EACH JDS274 (Black vinyl) $35.95 EACH Arm Rest Seat Cushion Fits: A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840; Also fits the following w/ standard seat: (40, 320, 330, 420, 430, 435, 440, 1010, 2010, 3010, 4010, 5010 but color may not match seat/ backrest) JDS273 Replaces: AF3272R JDS274 Replaces: AA6022R NOTE: 2 used per tractor; Sold individually. Order # Price Yellow Leatherette................................................... JDS413......... $156.50 Yellow Vinyl USA made......................................... JDS884......... $285.25 NOTE: Brackets & bolts not included. Chassis parts JDS272N (Black vinyl) Back Rest Seat Cushion, Steel Back w/ Brass Rivets Fits: A, AR, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840 JDS271N Replaces: AF3271R JDS272N Replaces: AA5357R (11-5/8" bolt spacing, 6" H) NOTE: Order JDS271N or JDS272N if seat back rest is solid as pictured below: Seat cushion support plate kit - USA made Order # Price JDS577 $111.35 JDS572 Description / Application Seat Cushion Support Plate Kit Fits: JDS413, JDS884, Replaces: R30443, R31512, R31513, R34282 NOTE: Kits includes JDS572, JDS573, JDS574, JDS575, JDS576 support plates, nuts, bolts, locks & instructions. JDS573 JDS574 JDS575 JDS576 The following parts (Sold separately) are components of JDS577 Seat Cushion Support Plate Kit: Order # Price JDS572 $60.75 Large Back Plate only, Replaces: R34282 JDS573 $27.95 Small Back Plate only, Replaces: R30443 JDS574 $17.25 LH Side Plate only, Replaces: R31513 JDS575 $17.25 RH Side Plate only, Replaces: R31512 JDS576 $10.85 Bolt Kit only STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com John Deere JDS272L (Black vinyl) Description / Application Seat cushions, pads cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Seat cushions, pads cont... Description 417 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Fits: 820 3-cyl., 830 3-cyl., 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 Description Order # Float ride seat parts Order # Price OLS084 $70.75 JDS2686 $149.95 JDS2541 $39.95 JDS489 $56.80 Pin & Bushing Rebuild Kit Fits: Some 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 2-cyl, (840 2 cyl SN: 8400200 & up) (All w/ Float-Ride seats) NOTE: Includes bushings & pins to rebuild one seat, bushings must be reamed/honed when installed. JDS533 $24.50 Seat Adjustment Handle Fits: Some 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 2-cyl, (840 2 cyl. SN: 8400200 & up) (All w/ Float-Ride seats) Replaces: AF3427R JDS532 $44.95 JDS822 $14.95 Price Universal Full Suspension Seat............................ ABC445....... $139.30 w/ Back Rest & 5-Angle Base (w/ Slide Track & Mounting Brackets) NOTE: Can be adapted to fit many tractors & lawn mowers. Seat shock absorber, parts Order # Price JDS411 $41.00 IHS325 $2.05 EACH JDS807 $118.50 Chassis parts John Deere Seat cushions, pads cont... JDS807S Description / Application Seat Shock Absorber w/ Rubber Bushings Fits: Some 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 2-cyl. (All w/ Float-Ride seats), Replaces: AF3426R (Extended c.c. = 13", Compressed c.c. = 8-3/4) Rubber Bushing only fits: Some 50, 520, 530, 620, 630, 720, 730, 820, 830 2-cyl. (All w/ Float-Ride seats) Replaces: F3296R, R26832 NOTE: 2 used on each pivot support rod; Sold individually. Seat Shock Absorber Assy. Fits: 1020, 1520, 2010, 2020, 2030, 2140 SN: 430000 & up, 2350, 2440 up to SN: 340999, 2510, 2520, 2550, 2630, 2640 up to SN: 340999, 2750, 2940, 2950, 3010, 3020, (3040, 3140 both SN: 430000 & up), 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 5010, 5020, 6030, 7020, 7520, 8430, 8630 (All w/ Deluxe Seat) Replaces: AR26529, AR69854, AR71976, RE62234 (shock), R27442 (upper cap), R26879 (lower cap), R26877 (spring), R26832 (bushing) NOTE: 7-5/8" c.c. closed, 10-1/2" c.c. extended $69.95 Seat Shock Absorber only Fits: Same as JDS807 Replaces: AR26529, AR69854, AR71976, RE62234 (shock), R26832 (bushing) Description / Application Rubber Torsion Seat Spring w/ (2) Bushings fits: 420, 430, 435, 440, 1010 (All w/ optional Float-Ride seats) Replaces: AT11049 NOTE: Must ream/ hone bushings when installed. Rubber Torsion Seat Spring Set (LH & RH) Fits: 50, 80, 520, 530, 620, 630, 720, 730, 820, 830, Replaces: AR39648, AR39649 USA made NOTE: Bushings sold separately. 2-piece Float Ride Torsion Spring Installation Tool fits: Same as JDS2686 USA made NOTE: Use to spread the rubber torsion springs under tension to install the adjusting handle. Tie Bar fits: Some 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 2-cyl, (840 2 cyl. SN: 8400200 & up) (All w/ Float-Ride seats) Replaces: AF3428R USA made Seat Short Link fits: Some 50, 80, 520, 530, 620, 630, 720, 730, 820, 830, (840 2-cyl SN: 8400200 & up) (All w/ Float-Ride seats) Replaces: AF3421R (3-1/8" long) USA made NOTE: 4 used per tractor; Sold individually Monroe® Easy Ride seat parts The following seat parts fit: A, B, G, L, LA w/ optional Monroe® Easy Ride seat: IHS325 $2.05 EACH 418 Order # Rubber Bushing only Fits: Same as JDS807 Replaces: F3296R, R26832 NOTE: 4 used per shock absorber; Sold individually. IHS030 Price Description $27.95 Seat Spring Coil STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # IHS329 Price Fenders, parts cont... Description / Application Order # $32.50 Price $150.00 JDS176 $139.00 JDS137 $149.00 JDS285L (LH) $255.95 Rear Mounted Seat Shock Absorber (Center-to-center compressed = 11-1/2", Fully extended = 18-1/8) USA made IHS465 $39.95 Mid Mounted Seat Shock Absorber (Overall Compressed = 9-1/8", Fully extended = 11) IHS584 $19.95 Seat Pivot Support Rod (3-1/2") NOTE: Includes (2) flat washers, (2) rubber bushings & (2) #5 bolts. IHS325 $2.05 Rubber Seat Bushing Seat bearing Fits: John Deere A & up (All w/ Knoedler replacement seat) USA made Order # Fenders, parts NOTE: Sold individually. Price JDS174L (LH) $318.95 JDS174R (RH) $314.95 Clam Shell Fender Brackets, Pair Fits: A up to SN: 650763, B up to SN: 260983, G up to SN: 41667 Replaces: A4050R (LH), A4049R (RH) NOTE: Allows the newer clam shell fenders to be mounted on the older John Deeres w/ round axle housing - 1934 to Early 1950. Sold as a LH / RH pair. 27" Tall Clam Shell Fender w/ Brace Supports fits: 40T, 420, 430, 435 (Special Utility (V), Tricycle (T), Row Crop Utility (W) only) Replaces: AM1834T NOTE: Primer. No extra brackets needed. Steel reproductions. LH & RH are the same; Sold individually. Price Seat Bearing (For Knoedler Seats)........................ ABC537....... $14.30 NOTE: 2 to 8 used per tractor; Sold individually. Order # 29" Tall Clam Shell Fender w/ Brace Supports fits: Late A SN: 650764 & up, B SN:260984 & up, G SN: 41668 & up, 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces: AA4655R NOTE: Primer. Will fit earlier serial numbers w/ purchase of JDS176 brackets. Steel reproductions. LH & RH are the same; Sold individually. Description / Application Fender Fits: Styled A up to SN: 650763, B up to SN: 260983, G up to SN: 41667 (Approximately 1939 early 1950), Replaces: AA1582R, AA1583R (Bolt holes c.c. = 3-1/2") NOTE: Wire rolled in edges & spot welds like the original. Will also fit Unstyled tractors, but instead of riveted brackets - the brackets are welded to fender. Will not fit tractors with oversize tires. Normal tire size is 12" down. Primered only; Fit to tractor prior to painting. JDS285R (RH) $255.95 JDS244 $139.00 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Chassis parts Description Description / Application John Deere JDS136 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Monroe® Easy Ride seat parts cont... Flat Top Fender Fits: 520, 530, 620, 630, 720, 730 JDS285L Replaces: AR20870R JDS285R Replaces: AR20869R NOTE: JDS285R does not have hand hole. Fender Support Brackets, Pair Fits: 520, 530, 620, 630, 720, 730 Replaces: R20573R NOTE: Sold as a pair. Fenders, parts continue on next page 419 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Fenders, parts cont... Order # Price JDS285L (LH) $255.95 JDS287R (RH) JDS124L (LH) $255.95 $167.95 JDS735L $468.50 JDS299 420 Description / Application Flat-Top Fender w/ Hand Hold Grommet Fits: 2010, 2030, 2150, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320 JDS285L Replaces: AR48773, AR20870R, RE13879 JDS287R Replaces: AR48872, RE13878 $167.95 JDS124R (RH) JDS735R Fenders, parts cont... $468.50 $6.15 Fender Fits: 820 3-cyl., 830 3-cyl., 920, 930, 940, 1020, 1030, 1040, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Industrial: 300, 301, 400, 401, 480 FL w/ round fenders JDS124L Replaces: AR51407, AR51408 JDS124R Replaces: AT20777, AT27146 Fender w/ Hand Hold Grommet Fits: 4320 w/ oversized tire, 4520, 4620, 5020, 6030 JDS735L Replaces: AR43143, AR43968, AR46022 JDS735R Replaces: AR43142, AR43967, AR46021 USA made Fender Hand Hold Grommet Fits: 530, 630, 730 (LH fender only); 1020, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2840, 2940, 2950, 2955, 3010, 3020, 3150, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Replaces: R20759 NOTE: Will fit JDS285L, JDS287R, JDS735L, JDS735R Flat-Top fenders. Order # Price Description / Application JDS485 (Bracket) $138.50 JDS601 (U-Bolt) $17.90 Mounting Bracket only (Bracket) Fits: 2010, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8630, 8640, 8650 (Slotted bolt holes to fit 7" & 8-1/4" c.c. u-bolts) NOTE: JDS485 fits JDS148L, JDS152R, JDS285L, JDS287R, JDS735L, JDS735R, Flat-Top fenders. JDS733L (LH) $299.95 U-Bolt fits: 2010 Rowcrop, 2010 Row Crop Utility SN: 42001 & up, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 Replaces: R26992 USA made JDS733R (RH) $299.95 JDS1975 (LH) $56.50 JDS1971 (RH) $56.50 JDS1973 (LH) $26.50 JDS1969 (RH) $26.50 Sound Guard Fender Fits: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (All w/ sound guard cab) JDS733L Replaces: AR87732, RE14987, RE11220 JDS733R Replaces: AR87731, RE14981, RE11219 Front Fender Light Panel (For tractors w/ Sound Guard Body or Open Station) Fits: Late 2140 - 2955, 3040 - 3350, 4030 4955 (All 1973 & up) JDS1975 Replaces: R81697, AR84970 JDS1971 Replaces: R81696, AR84969 NOTE: 2 used per tractor; Sold individually. Rear Fender Tail Light Panel (For Sound Guard Body or Open Station) Fits: Late 2140 - 2955, 3040 - 3350, 4030 4960 (All 1973 & up) JDS1973 Replaces: R52562 JDS1969 Replaces: R52561 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # JDS720 JDS920 Price $14.95 $92.95 Toolboxes cont... Description / Application Wiring Cover fits: 520, 530, Must be cut to length for 620, 630, 720, 730 Replaces: AR20932R, AR20871R USA made NOTE: Attaches wiring harness to rear axle housing. Used when equipped with flat-top fenders & lights. 2 used per tractor; Sold individually. Fender Light Harness Kit (For 4-Light Flat-Top fenders) Fits: 530, 630, 730; Serviceable for 520, 620, 720 USA made NOTE: Exact of original. Order # Price All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Fenders, parts cont... Description / Application ABC472 $32.50 Fits: John Deere models (4" wide x 16" long x 4-1/4" tall) Step & toolbox assemblies - USA made Order # Price JDS298 $158.50 JDS412 $158.50 Floor mats - USA made Description / Application LH Step & Toolbox Assembly Fits: John Deere 2-cyl. Rowcrop models (1935-60) NOTE: Not compatible w/ 3-point hitch. NOTE: Consists of a heavy duty 3/8" rubberized closed cell foam base w/ a 1/8" durable textured rubber top. Between these two layers is a PVC sound-deadening barrier. This industrial grade matting will provide years of use in high wear conditions while maintaining its sound RH Step & Toolbox Assembly Fits: John Deere 2-cyl. Rowcrop models (1935-55) NOTE: Not compatible w/ 3-point hitch. and vibration dampening qualities. John Deere Must trim for final fit, dimensions are approx. 30" long x 29" wide. Order # JDS2223 $94.95 $94.95 Application (For Open Station Tractors w/ Powershift transmissions) fits: 2520, 3020, 4000, 4020, 4320, 500A (All w/ Powershift transmission), Replaces: R44960 Price Order # JDS3105 Price NEW! Step & Bracket Assembly Fits: A series up to SN: 561902, B series up to SN: 186133, G series up to SN: 18699 (All w/ drawbar roller) (4.94" tall, 10.38" long) NOTE: Mounts to side of drawbar hanger. Bracket only is USA made. JDS3114 $84.50 JDS243 $54.50 Application JDS129 $53.50 Fits: AO, AR SN: 281400 & up, G, 60 Standard up to SN: 6042999, 60 Orchard, 620 Orchard, 70 Row Crop, 720 Row Crop, 730 Row Crop gas, Replaces: AA7265R, AF636R USA made JDS916 $48.35 Fits: 50, 520, 530 Replaces: AB4518R USA made NOTE: Bare metal. Description / Application $59.95 (For Open Station Tractors) Fits: 2520, 3020, 4000, 4020, 4320, 500A; Serviceable for 3010, 4010 (All w/ Syncro range transmissions), Replaces: R44960 Toolboxes Order # Step & bracket assemblies ABC308 $37.95 Fits: John Deere models (11" long, 4" wide, 4-1/2" tall, Bolt holes center to center = 5-1/2") NEW! Step & Bracket Assembly (Double Step) fits: M, MT (15.570" tall x 19.11" long bracket) Mounts to R/H running board. Notch on step points towards clutch housing. Has one extra hole: Use first hole on bracket for MT, second hole is for M. Bracket only is USA made. Step & Bracket Assembly Fits Rowcrop models: A, B, G, H, 50, 60, 70, 520, 530, 620, 630, 720, 730; Hi crop models: 2010, 2510, 3020, 4010, 4020, 8020 Replaces: AA6092R (assy.), A5233R, F3195R (step), A5234R (bracket) Step & bracket assemblies continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 421 Chassis parts JDS2219 Price All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Step & bracket assemblies cont... Order # Price JDS647 $26.50 JDS646 $24.30 JDS3108 JDS3117 $78.50 Step & bracket assemblies cont... Description / Application Order # Step only (For JDS243 Step & Bracket Assy.) fits: John Deere models Replaces: A5233R, F3195R Bracket only (For JDS243 Step & Bracket Assy.) fits: John Deere models Replaces: A5234R NEW! Step & Bracket Assembly (Double Step) fits Rowcrop models: A, B, G, H, 50, 60, 70, 520, 530, 620, 630, 720, 730; Hi crop models: 2010, 2510, 3020, 4010, 4020 (15-3/8" tall x 18-3/4" long x 2-1/2" wide) Mounts to front of left rear axle housing. Bracket only is USA made. $59.95 JDS757 $58.50 JDS3152 $74.50 JDS759 422 $54.50 $58.50 JDS3111 $69.96 Step & Bracket Assembly Fits: 80, 820, 830 Replaces: F3195R (step), R1897R (bracket) NOTE: Bracket only is USA made. Step & Bracket Assembly Fits: 820 3-cyl., 830 Utility 3-cyl., 1020, 1520, 1530, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2630, 2640, 2840 Replaces: F3195R (step), T25703 (bracket) NOTE: Bracket only is USA made. Description / Application Step Fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320; Industrials: 500A, 600 Replaces: R27883 NEW! Fuel Tank Filling Step Fits: 2510 thru 6030, etc. (10-3/4" tall x 6-1/64" long x 2" wide) USA made NOTE: Mounts to left frame rail. Bracket only is USA made. Brake parts Price Description / Application JDS683 $38.95 Brake Lining Kit Fits: A, G, 60; The following high crops: 70H, 620H, 630H, 720H, 730H gas, diesel Replaces: AA4253R, RE235937 (10-1/2" outer curve length, 1-3/4" wide) NOTE: Includes (4) linings & brass rivets. No returns on broken shoes. JDS491 $25.00 Brake Lining Kit Fits: B, 50, Replaces: AB3848R, AB3849R, B2723R, RE227855 (7-1/2" curved length, 1-1/2" wide) NOTE: For John Deere B up to SN: 201000 customer must trim lining to length. Includes (4) linings & (32) rivets. No returns on broken shoes. JDS695 $46.45 CKS1601 $34.95 EACH ABC426 $15.00 EACH Step & Bracket Assembly Fits standard models NOT for Rowcrop tractors: 620, 630, 720, 730 Replaces: F3195R (step), A5234R (bracket) NOTE: Bracket only is USA made. NEW! Upper Step w/ Bracket Fits: 620, 630, 720, 730 Std. only Replaces: F3197R (bracket), F3195R (step pad) NOTE: Bracket only is USA made. JDS761 $29.95 Order # NEW! Step & Bracket Assembly Fits: 40T, 420T, 430T (15-3/8" tall x 18-1/4" long bracket x 2-1/2" wide) NOTE: Bracket only is USA made. Price JDS697 Brake Lining Kit Fits: H SN: 7806 & up, Replaces: AH1155R (10" outer curve length, 1-3/4" wide) NOTE: Includes (4) linings & brass rivets. No returns on broken shoes. Disc Brake Linings w/ Rivets Fits: M, MI, Replaces: AM695T (6" O.D.) NOTE: Sold in pairs. 2 pairs used per tractor. If lining is bonded rather than riveted, customer must drill rivet holes. No returns if broken. Riveted Brake Disc Fits: MT, Replaces: AM852T, AM929T, AT314775 (5" dia., 10 spline, 1-5/8" spline I.D.) NOTE: Check dimensions before ordering. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price ABC447 $28.50 EACH JDS1019 $36.95 EACH Description / Application Riveted Brake Disc Fits: 40 except Tricycle, 320, 330, (420, 430 Hi-Crop, Standard, Utility, Special), (1010 Single Row Crop, Utility, Orchard) Replaces: AM1967T, AT372445 (5" dia., 25 spline, 1-5/8" spline I.D.) NOTE: Check dimensions before ordering. Riveted Brake Disc Fits: 40T, 420-I, T, W, 430-I, T, W, 440-I, 1010 RU, 1010 Special Rowcrop Utility, 1010 RC Replaces: AM852T, AM930T, AM1828T, AT13066, AT314745 (5" dia., 21 spline) NOTE: Check dimensions before ordering. Disc Brake Ball Fits: MT, 40, 420, 430, 435, 440, 1010, 2010 Replaces: M830T (7/8" dia. steel ball) NOTE: Sold individually. JDS665 $49.30 Brake Lining Kit Fits: R, 70, 80, 520, 530, 620, 630 (Non HiCrop), Replaces: AR604R, RE227939 (10-1/2" curved length, 2-1/4" width) NOTE: Includes (4) linings & brass rivets. No returns on broken shoes. JDS685 $33.00 Brake Lining Kit fits: 720, 720D, 730, 730D, 820, 830, 840, Replaces: AF2866R, RE227866 (11-3/4" outer curve length, 2-1/4" wide) NOTE: Includes (4) linings & brass rivets. See JDS683 for high crops. No returns on broken shoes. MIS1131 $33.95 Brake Riveting Tool Kit (1-1/4" throat, 1/8" dia. rivet punch) NOTE: Use to rivet brake linings to existing shoe or band. Includes a tool to drive out old rivets, a tool to drill & countersink linings, a tool to peen the new rivet & instructions. Mounts into vice. Mounts into vice. Not for use w/ deep recess shoes. MIS2547 JDS2035 $89.95 $4.95 EACH Riveting Tool (For brake shoe & disc relining for most tractors & clutch pulley brake lining) (3-3/8" deep throat x 2-1/8" high throat) USA made NOTE: Includes 1 punch for brake shoe rivets & 1 punch for John Deere clutch pulley brake. Description / Application $5.65 EACH Brake Housing Gasket Fits: A SN: 584000 & up, (AO, AR SN: 272000 & up), 60, 620, 630 (All Except High Crops), Replaces: A3789R USA made JDS874 $5.25 EACH JDS876 $5.25 EACH JDS878 $14.95 EACH Brake Housing Gasket Fits: B SN: 232468 & up, 50, 520, 530 Replaces: B2743R USA made Brake Housing Gasket Fits: G, 70, 70D, 720, 720D, 730, 730D Replaces: F157R USA made Brake Oil Seal Fits: 520, 530, 620, 630, 720, 720D, 730, 730D, Replaces: AF2788R, AR20149R ABC2039 $7.95 EACH ABC1543 $13.95 EACH Brake Pinion Shaft Outer Seal Fits: 1010, 2010 except Crawlers Replaces: AM2924T, AT12540 (1.375" I.D., 2.378" O.D., .312" width) USA made NOTE: 2 used per tractor; Sold individually. JDS702 $3.50 EACH Brake Shoe Return Spring Fits: A, G, R, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 gas, diesel Replaces: R21753R (4-1/8" o/a length) USA made NOTE: 2 used for Unstyled models & 4 used for Styled models; Sold individually. JDS886 $14.95 EACH Brake Return Spring Fits: L, LA, LI, Replaces: L207T (2-3/4" o/a length) USA made NOTE: 2 used per tractor; Sold individually. JDS873 $8.95 EACH Brake Shoe Return Spring Fits: B series, D, 50, Replaces: B228R (3-1/4" o/a length) USA made NOTE: Also used as a spring on decompression control shaft arm on 720D & 730D. 2 used for Unstyled models & 4 used for Styled models; Sold individually. Brake Housing Gasket Fits: A up to SN: 583999, (AI, AO, AR up to SN: 271999), Replaces: A413R USA made NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Differential Brake Pinion Shaft Inner Bearing Seal fits: 40 - 440, 1010 Replaces: AM253T, T22069 (2.130" O.D, 1.375" I.D., .437" wide) Chassis parts $2.15 EACH Order # John Deere ABC1225 Price JDS871 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Brake parts cont... Brake parts cont... Brake parts continue on next page 423 Order # Price Description / Application Order # $5.95 EACH Brake Pedal Return Spring Fits: H, R, 60 Orchard & Standard, 80, 620 Orchard, Replaces: H449R (4-5/8" o/a length) USA made NOTE: 2 used per tractor; Sold individually. JDS892 $8.95 EACH Brake Pedal Return Spring Fits: MT, 350, Replaces: M957T (2-3/8" o/a length) USA made NOTE: 2 used per tractor; Sold individually. JDS890 $8.95 Brake Pedal Return Spring Fits: MC, 40C, 420C up to SN: 100000 Replaces: L4223T (5-1/4" o/a length) USA made NOTE: 1 used per application. JDS899 $9.95 EACH Brake Pedal Return Spring Fits: 40T, 420T, 430T Replaces: M2039T (4-1/2" o/a length) USA made NOTE: 2 used per tractor; Sold individually. JDS894 JDS897 Chassis parts Brake parts cont... JDS960 $9.95 EACH John Deere All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Brake parts cont... ABC561 JDS2217 JDS893 424 $5.95 EACH $7.50 EACH $44.95 EACH $7.50 JDS891 Price $7.85 Description / Application Brake Pedal Bushing Fits: 4030, 4040, 4050, 4055, 4230, 4240, 4255, 4430, 4440, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8020, 8430, 8440, 8450, 8560, 8630, 8640, 8650, 8850 Replaces: A1197R, R51192 (1.365" long, .815" O.D., .750" I.D.) Rear axle seal, parts Order # Price Description / Application Rear Axle Felt Seal fits: A, AN, AW up to SN: 547321, (ANH, AWH up to SN: 583999 & up), 60 Orchard, (60 Standard up to SN: 6042999), (620, 630 both Orchard only) Replaces: A380R (3.50" I.D., 4.683" O.D., 0.425" thick) USA made NOTE: 2 used per tractor; Sold individually. JDS1758 $24.95 EACH JDS1984 $24.95 EACH Brake Pedal Return Spring fits: 40H, S, U, V, W, 320, 330, 420H, I, S, U, V, W, 430H, I, S, U, V, W, 435, 440, 1010 (All), 2010 Crawler, Replaces: M2222T (2-3/4" o/a length) USA made NOTE: 2 used per tractor; Sold individually. JDS2947 $14.50 EACH Brake Lock Spring fits: 40H, S, U, V, W, 320, 330, 420H, I, S, U, V, W, 430H, I, S, U, V, W, 435, 440, 1010 (Single Row Crop, Utility, Orchard), Replaces: M2221T (2" o/a length) USA made NOTE: 2 used per tractor; Sold individually. Rear Axle Felt Seal fits: (B series up to SN: 200999, except tractors w/ B1174R axle housing); BO, BR all SN's w/out wheel brakes, Replaces: B348R, AB475R (3.250" I.D., 4.250" O.D., 0.438" wide) USA made NOTE: 2 used per tractor; Sold individually. JDS2068 $22.50 EACH Rear Axle Felt Seal fits: 'Some' Unstyled B when using #B1174R axle housing SN: 42200 - 59999, B SN: 201000 & up, BN, BW, BNH, BWH, BWH40 Replaces: AB3497R, B2408R (3.125" I.D., 4.375" O.D., .438" thick) USA made NOTE: 2 used per tractor; Sold individually. ABC131 $9.30 EACH JDS2003 $24.95 EACH Actuating Spring (For Disc Brakes) Fits: MT, 40, 320, 330, 420, 430, 435, 440, 1010, 2010, Replaces: M831T (1.275" o/a length, .105" wire dia.) NOTE: 4 used per tractor; Sold individually. Brake Valve Operating Boot Assy. Fits: 3010, (3020 up to SN: 122999), 4010, (4020 up to SN: 200999), 5010; Industrials: 500, 600 NOTE: See website for replacement numbers. 2 used per tractor; Sold individually. Brake Pedal Bushing Fits: 820 3-cyl. - 7520 Replaces: B177R (1.215" long, .750" O.D., .690" I.D.) Rear Axle Felt Seal fits: A, AN, AW (All SN: 547322 & up), 50, 520, 530 (All w/ 88" tread), Replaces: AA3657R, A3043R (3.375" I.D., 4.656" O.D., 0.438" thick) USA made NOTE: 2 used per tractor; Sold individually. Rear Lower Axle Outer Oil Seal Fits: M, MI, MC, 40S, U, V, W, 320, 330 Replaces: AM268T, AM776T, AM2773T, AT48334 (2" I.D., 2.879" O.D., .312" wide) NOTE: 2 used per tractor; Sold individually. Rear Axle Felt Seal fits: D, G, R series, 60, 70, 80, 620, 720 820 2-cyl., 630, 730, 830 2-cyl., 840 2-cyl. & some Highcrops & Standards, Replaces: AD1275R, D2455R (3.969" I.D., 5.438" O.D., 0.500" thick) USA made NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS1062 $38.50 EACH JDS1064 $38.50 EACH JDS1060 $38.50 EACH Hydraulic parts cont... Description / Application Order # Price Rear Axle Seal Retainer Fits: B SN: 201000 & up, (BN, BW SN: 201000 - 275397), Replaces: B2412R (4.238" I.D., 4.378" O.D.) USA made NOTE: Bare steel, 2 used per tractor; Sold individually. JDS2623 $148.50 Rear Axle Seal Retainer Fits: A Hi-Crop SN: 665000 & up, G SN: 13751 & up, G Hi-Crop SN: 46800 & up, R, (50 w/ 97-1/4" or 104" tread), 60, (60 Standard SN: 6043000 & up), 60 Hi-Crop, (70 SN: 7017500 & up), 70 Hi-Crop SN: 7017500 & up, 80, (520 w/ 97-1/4" or 104" tread), 620, 630 & Hi- Crops, 720, 730 & Hi-Crops, 820 2-cyl., 830 2-cyl. Replaces: F786R (3.605" I.D., 5.533" O.D) USA made NOTE: Bare steel, 2 used per tractor; Sold individually. JDS1441 $84.95 Rockshaft Lever Lift Control Cable w/ End fits: 2510, 3010, (3020 up to SN: 122999), Replaces: AR26810 (cable), R31422 (end) NOTE: This is an adjustable cable. The overall length is 55-1/4" w/out the threaded end. The housing length measures 45-1/2". Includes the threaded end (2-1/2" o/a length). JDS1443 $84.95 Rockshaft Lever Lift Control Cable w/ End fits: 4010, (4020 up to SN: 200999) Replaces: AR26712 (cable), R31422 (end) NOTE: This is an adjustable cable. The overall length is 57-1/4" w/out the threaded end. The housing length measures 48". Includes the threaded end (2-5/8" o/a length). Order # JDS1050 $327.95 JDS1043 $183.50 JDS128 Description / Application Hydraulic Pump Drive Bushing Fits: 830 3-cyl. thru 8640 Industrials: 300 thru 772A New Generations Replaces: AR34098, AR49427, R45822 (1.070" O.D., .565" I.D., .657" long) NOTE: Black rubber. 4 used per tractor; Sold individually. $32.50 Hydraulic Reservoir Cap w/ Copper Filter Element & "OIL" stamped into top fits: M, MC, MI, MT, 40, 320, 330, 420, 430, 1010, Replaces: AM494T, AM1578T, AM1586T (1-1/2" tall) USA made NOTE: Exact of original. E-coated black. Fits over 1-1/2" pipe. JDS765 $8.35 3-Piece Rockshaft Cover Set Fits: 2520, (3020 SN: 123001 & up), 4000, (4020 SN: 201001 & up), 4320 LH Rockshaft Cover w/ Toolbox Fits: Same as JDS1050 Replaces: AR40817 JDS1045 $124.25 RH Rockshaft Cover Fits: Same as JDS1050 Replaces: AR41599 $38.50 Power-Trol Lever Fits: A, B, G Replaces: AA3744R NEW! Rockshaft Lever Lift Control Cable fits: 2010, Replaces: AT13231 NOTE: This is an adjustable cable. The overall length is 46". The housing length measures 40-1/2". Chassis parts JDS500 Price $2.45 EACH 2-Piece Hydraulic Lever Guide Kit Fits the following console tractors: 2520, (3020 SN: 123000 & up), 4000, (4020 SN: 201000 & up), 4320, 4520, 4620, 6030, 7020, 7520, Replaces: R41194, R41760 JDS1047 Hydraulic Lever Grip Fits: 80, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830, 840 2-cylinders Replaces: F2948R STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com John Deere Rear Axle Seal Retainer Fits: A, AN, AW (All SN: 547322 & up); The following w/ 88" tread: 50, 520, 530 Replaces: A3041R (4.727" O.D., 3.033" I.D.) USA made NOTE: Bare steel, 2 used per tractor; Sold individually. $53.50 Hydraulic parts JDS1496 Description / Application JDS962 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Rear axle seal, parts cont... $49.95 Rockshaft Cover Support Fits: Same as JDS1050 Replaces: R41231 Hydraulic parts continue on next page 425 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Hydraulic parts cont... Order # JDS1696 JDS426 Price $24.95 PTO clutch drum seals Description / Application Rockshaft Lift Arm Shield Fits: (2520, 3020 SN 123000 & up), (4000, 4020 SN: 201000 & up), 4320 Replaces: R41663 NOTE: Powder coated green. Order # Price ABC2831 $13.50 ABC1501 $9.95 $58.95 Hydraulic Coupler w/ Cover & Shear Washer Fits: Early A, B, G USA made NOTE: For locking nut style coupler. JDS426T (Coupler) Order # Price JDS727 $14.95 EACH JDS1728 $49.95 John Deere JDS426T JDS426CVR Chassis parts PTO Clutch Drum Inner Seal Fits: 50, 60, 70, 520, 530, 620, 630, 720, 730 (All w/ engine driven live PTO), Replaces: T11492, AA5247R; Also a Dual Power-Trol Valve Control Arm Seal for 520, 530, 620, 630, 720, 730, 820 2-cyl., 830 2-cyl., 840 2-cyl., Replaces: AT11492, AA5247R (1.565" O.D., 1.125" I.D., .250" width) PTO clutch discs, parts Coupler only or Cover only Fits: Same as JDS426 JDS426T Replaces: A3134R, AA5534R USA made JDS426CVR Replaces: A3255R USA made JDS463 $5.95 JDS427 $55.00 JDS427S $34.95 Washer only Fits: Same as JDS426 Replaces: A3141R Hydraulic Coupler w/ Cover Fits the following w/ swing lever style coupler (Power-trol unit SN: 67905 & up): A, B, G, R, 50, 60, 70, 40, 320, 330, 420, 430, 435, 440, (1010 up to SN: 42000) USA made $34.95 JDS427CVR $28.95 Hydraulic Block Off 'Dummy' Plug Fits the following w/ swing lever style coupler (Power-trol unit SN: 67905 & up): A, B, G, R, 50, 60, 70, 40, 320, 330, 420, 430, 435, 440, (1010 to SN: 42000) Replaces: AA4321R, AA4981R (plug) USA made Cover only Fits: JDS427 & JDS772 Replaces: A3614R USA made Description / Application PTO Clutch Disc fits: 50 to SN: 5016358 (5 used) 50 SN: 5016359 & up (6 used); 60 to SN: 6031044 (5 used), 60 SN: 6031045 & up (6 used); 70 to SN: 7008972 (7 used), 70 SN: 7008973 to 7039399 (8 used), 70 SN: 7039400 & up (7 used); 80 (11 used); 520 (6 used); 530 (6 used); 620 (8 used); 630 (8 used); 720 (11 used); 730 (11 used); 820 (11 used), 830 (11 used) & 840 2-cyl (11 used) (All w/ Live PTO) Replaces: AA5286R, AR1294R, RE29784 NOTE: Sold separately. PTO Clutch Cam Disc Fits: 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840 (2-cyl.) Replaces: A4574R JDS1074 $10.95 EACH JDS1080 $16.50 EACH Coupler only Fits: Same as JDS427 Replaces: A3613R, AA5535R USA made 426 NEW! Inner PTO Clutch Drum Seal Fits: R Replaces: AL2653T, AR608R (2.004" O.D., 1.125" I.D., 0.250" width) $34.95 JDS426CVR $28.95 (Cover) JDS772 Description / Application PTO Clutch Drive Disc fits: 50 up to SN: 5016358 (6 used) & SN: 5016359 & up (7 used); 60 up to SN: 6031044 (6 used) & SN: 6031045 & up (7 used); 70 up to SN: 7008972 (8 used) & SN: 7008973 - 7039399 (9 used) & SN: 7039400 & up (8 used); 70D up to SN: 7039399 (9 used) & SN: 7039400 & up (8 used); 520 (7 used); 530 (7 used); 620 (9 used); 630 (9 used); 720 (12 used) & 730 (12 used), Replaces: A5145R USA made NOTE: Sold Individually. PTO Clutch Drive Disc Fits: 80, 820, 830, 840 2-cyl. Replaces: R1902R USA made NOTE: 12 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS1076 $25.75 EACH JDS1072 $39.95 JDS1078 $39.95 JDS2013 $9.95 JDS2015 $11.95 JDS2017 $11.95 JDS2019 $9.95 JDS2027 JDS2023 $8.95 $8.95 PTO Brake Plate w/ Facing Fits: 50, 60, 70, 520, 530 Replaces: AA5284R, RE20726 NOTE: 1 used per tractor. PTO Brake Plate w/ Facing Fits: 80, 620, 630, 720, 730, 820, 830, 840 2-cyl., Replaces: AF2768R, RE20727 NOTE: 1 used per tractor. Price $8.95 JDS2025 $8.95 JDS2021 $2.50 JDS2031 $8.95 JDS2033 $5.95 EACH ABC2008 $12.50 JDS2009 $4.95 PTO Clutch Housing Cover Gasket Fits: 50, All w/ engine driven PTO (live PTO), Replaces: B3196R USA made PTO Clutch Housing Cover Gasket Fits: 60, (60 Standard SN: 6043000 & up), 70, 70 Standard, All w/ engine driven PTO (live PTO), Replaces: A4584R USA made PTO Clutch Housing Cover Gasket Fits: 520, 530, All w/ engine driven PTO (live PTO), Replaces: B3768R USA made PTO Clutch Housing Cover Gasket Fits: 620, 630, All w/ engine driven PTO (live PTO), Replaces: A5688R USA made PTO Clutch Housing Cover Gasket Fits: 720, 730, All w/ engine driven PTO (live PTO), Replaces: F2968R USA made PTO 3 Bolt Bearing Cover Gasket (For PTO clutch shaft) fits: 50, (60 Rowcrop up to SN: 6025403), All w/ engine driven PTO (live PTO), Replaces: A4553R USA made PTO 3 Bolt Bearing Cover Gasket (For PTO clutch shaft) Fits: 60 Rowcrop & Highcrop SN: 6025404 & up, 60 Standard, (60 Orchard SN: 6025000 & up), 70 gas, LP up to SN: 7014799, All w/ engine driven PTO (live PTO), Replaces: F1457R USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application PTO 3 Bolt Bearing Cover Gasket (For PTO clutch shaft) Fits: 70 gas, diesel SN: 7014800 & up, 520, 530, 620, 630, All w/ engine driven PTO (live PTO) , Replaces: F1542R USA made PTO 3 Bolt Bearing Cover Gasket (For PTO clutch shaft) Fits: 720, 730 series Replaces: F2964R, F3400R USA made PTO Shaft Oil Seal Housing Gasket Fits: A series SN: 488000 & up, (AO, AR both w/o powertrol), B series SN: 201000 & up, (G series SN: 43352 & up), R, 50, some 60, 70 series w/ transmission driven (non live) PTO, Replaces: A2396R USA made PTO Shaft Oil Seal Housing Gasket / Shim Fits: 60 SN: 6025404 & up (5 used), 70 gas (5 used), 70 diesel (2 used), 520 - 730 (8 used) All w/ engine driven PTO (live PTO) Replaces: F1459R, F1460R (0.006" thick) USA made NOTE: Paper finish. Priced and sold in lots of 5 gaskets. PTO Oil Seal Housing Steel Shim Fits: 60 SN: 6025404 & up, 70, 520 - 730 All w/ engine driven PTO (live PTO) Replaces: F1461R (0.018" thick) USA made NOTE: Two used per tractor; Sold individually. PTO Output Shaft Seal (For 1-3/8" PTO) Fits: A series SN: 488000 & up, (AO, AR SN: 260000 & up), (B series SN: 149700 & up), (BO, BR SN: 333100 & up), (G series SN: 43352 & up), R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 4010 Replaces: AA2296R (2.110" O.D., 1.375" I.D., .315" wide) USA made PTO Clutch Adjusting Cover Gasket Fits: 520, 530, 620, 620 High crop, 620 Standard, 630, 630 High crop, 630 Standard, 720, 720 High crop, 720 Standard, 730, 730 High crop, 730 Standard Replaces: F2883R, R21113R USA made 427 Chassis parts $9.95 PTO Clutch Plate w/ Facing fits: 50 SN: 5032350 & up, 60 SN: 6060700 & up, 70 SN: 7039400 & up, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840 2-cyl., Replaces: AR1293R, RE29794 NOTE: 2 used per tractor; Sold individually. Order # JDS2029 John Deere JDS2011 Description / Application PTO clutch discs, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. PTO clutch discs, parts cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Order # Price JDS093 $248.50 JDS094 $322.50 PTO shaft, parts cont... Description / Application Order # PTO Gears (Drive) Fits: 420, 430, 435, 440 Replaces: M3546T NOTE: 13 teeth. Price JDS2045 $17.95 Transmission PTO Driven Gear Bearing Fits: 420 H, I, U, W, 430 H, I, U, W, 435, 440 (All w/ 5 speed transmission) Replaces: JD8819T, AM2119T USA made NOTE: 2 used per gear; Sold individually. PTO Output Shaft Outer Bearing Fits: Late 40C, 40H, U, W, 320, 330, 420C, H, I, U, W, 430C, H, I, U, W, 435, 440, 1010 w/ single speed 540 PTO assy. Replaces: JD8819T, AM2119T USA made NOTE: 1 used per PTO. JDS1259 $209.40 JDS959 $265.00 PTO Gear Fits: 1010, 2010 (both w/ dual range PTO) Replaces: T13512 NOTE: 28 teeth. PTO Drive Gear fits: 2840, (3020 SN: 123000 & up), 4000, (4020 SN: 201000 & up), 4030, 4040, 4050, 4055 quad & power shift, 4230, 4240, 4250, 4255 quad & power shift, 4320 syncro, 4430, 4440 quad or power shift, 4450 quad or power shift, 4455 quad or power shift, Replaces: R42014 NOTE: 540 RPM; 31 teeth. PTO shaft, parts Order # JDS184 ABC2047 428 Price $162.95 $5.95 ABC2039 $7.95 JDS1222 $13.50 PTO Oil Seal (For 1-1/8" PTO shafts) Fits: A series up to SN: 487999, (AO, AR SN: 258330 - 259999), B series up to SN: 149699, (BO, BR SN: 331077 - 333099) Replaces: AB2578R (1.125" I.D., 1.832" O.D., .250" wide) JDS967 $108.50 PTO Shaft Oil Seal Housing (For 1-1/8" PTO shafts) fits: A series up to SN: 487999, (AO, AR SN: 258330 - 259999), B series up to SN: 149699, (BO, BR SN: 331077 - 333099) (All equipped w/ casting #B1679R), Replaces: B1679R USA made NOTE: Use w/ seal # JDS1222. ABC2837 $9.95 $14.95 Order # Price MIS118 $48.50 MIS138 $48.50 Outer PTO Seal Fits: M, 40, 320 - 440, 820 3-cyl. - 2640 Replaces: AM253T, T22069 (2.130" O.D, 1.375" I.D., .437" wide) NEW! Front Crankshaft Seal Fits: 1010, 2010 gas, LP, diesel Replaces: AT344T (2.380" O.D., 1.500" I.D., 0.500" wide) Description / Application (1-1/8 Female) Fits: Tractors up to 75 horsepower (1-1/8" - 6 x 1-3/8", 6 spline) (1-3/8" Female & Male) Fits: Tractors up to 75 horsepower (1-3/8" - 6 x 1-3/8", 6 spline) PTO shields Order # Inner PTO Bearing Fits: Late 40, H, W, 320, 330, 420C, H, I, U, W, 430C, H, I, U, W, 435, 440, 1010 w/ single speed PTO Replaces: JD7198T PTO Output Shaft Inner Seal Fits: (40H,W), 320, 330, (420C,H,I,U,W), (430C,H,I,U,W), 435, 440, 1010 w/ single 540 PTO, Replaces: C3970E, AM2553T (1.756" O.D., 1.375" I.D., 0.187" wide) PTO over-running clutches Description / Application PTO Shaft only Fits: (420, 430C, I & W only), 435, 440 & 1010 Rowcrops w/ single speed PTO up to SN: 42000, Replaces: M2916T (9-15/16" long, 21 / 6 splines) USA made Description / Application ABC2043 PTO Gears (Driven) Fits: 420, 430, 435, 440 Replaces: M3545T NOTE: 19 - 43 teeth. Chassis parts John Deere PTO gears, parts JDS652 Price $34.95 Description / Application PTO Flipper Guard w/ Pin & Spring Fits: A SN: 523600 & up, B SN: 149700 & up, G SN: 43352 & up, (50, 60, 70, 70D w/ Non-Live PTO & Non-Hydraulics) Replaces: AA3522R (guard), F711R (spring), F710R (pin) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS650 $6.95 JDS364 $64.95 $48.95 JDS381 $96.00 JDS380 $96.00 JDS728 $96.50 $35.00 JDS650 $6.95 JDS382 $79.95 JDS383 $79.95 JDS387 $154.00 Spring only Fits: Same as JDS652 Replaces: F711R PTO Shield fits: A, B SN: 82447 & up, G SN: 9423 & up, LA, (50, 60, 70, 70D w/ Non-Live PTO & Non-Hydraulics) Replaces: AA2297R USA made NOTE: If flipper guard is needed use JDS652. Order # Price JDS384 $64.95 JDS388 $99.95 JDS147 $109.95 JDS779 $49.30 JDS784 $54.95 PTO Flipper Guard Fits: H Replaces: H753R PTO Shield Fits: H w/ 1-1/8" PTO Replaces: AH821R USA made PTO Shield Fits: H w/ 1-3/8" PTO Replaces: AH1098R USA made PTO Shield Fits: M, (MT w/out belt pulley) Replaces: AM214T, AM599T USA made PTO Flipper Guard Fits: 50, 60, 70, 520, 530, 620, 630, 720, 730 Replaces: AA5288R PTO Shield only Fits: 520, 530, 620, 630, 720, 730 Replaces: AR20482R USA made PTO Casting only Fits: 520, 530, 620, 630, 720, 730 Replaces: AF2687R USA made PTO Shield Fits: 1010 w/ dual PTO & 1010 Rowcrop SN: 42001 & up, Replaces: AT13293 USA made PTO Shield Fits: 2510, 2520, 3020, 4000, 4020, 4030, 4230, 4320, 4430 Replaces: R33348 PTO Shield Fits: 3010, 4010, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520 Replaces: R27562 Front wheel bolts - USA made NOTE: Sold individually. Order # Price Description / Application ABC399 $2.00 Front Wheel Lug Bolt fits: A w/ hub #A3004R, A3566R, F843R, B SN: 153376 & up, (BW, BWH SN: 201000 & up), G SN: 20278 & up, H, M SN: 43251 & up, MI, MT, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 520, 530, 620, 630, 720, 730, 820 2-cyl., 830 2-cyl., 1010, 2010. The following using 1/2" dia. lug bolt: Early 820 3-cyl., 830 3-cyl., 1020, 1520, 2020, 2030, 3010 w/ hub # F843R Replaces: AL2329T, JD19R, JD22 (1/2"-20 NF, 7/8" thread length, 13/16" hex head) NOTE: 6 used per rim. ABC397 $2.75 Front Wheel Lug Bolt fits: A w/ hub #A1553R & C391R, B up to SN: 153375, (BW, BWH up to SN: 200999), D, G up to SN: 20277, Late 820 3-cyl., 830 3 cyl., 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 210C Loader, Replaces: AA4173R, AT11920, JD16R, JD17, JD21, T21544, T23252 (9/16"-18 NF, 1-1/8" thread length, 7/8" hex head) NOTE: 6 to 8 used per rim. Spring only Fits: Same as JDS409 Replaces: F711R PTO Shield fits: 50, Early 60 up to SN: 6025403; Also fits 70, 70D w/ Non-Live PTO, Replaces: AA5243R USA made NOTE: If flipper guard is needed use JDS409. Description / Application PTO Shield fits: 60 SN: 6025404 & up, 70, 70D (All w/ Live PTO) Replaces: AF1664R USA made NOTE: If flipper guard is needed use JDS409. PTO Shield w/ Casting Fits: 520, 530, 620, 630, 720, 730 Replaces: AR20482R (shield), AF2687R (casting) USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 429 Chassis parts JDS409 Description / Application John Deere JDS653 PTO shields cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. PTO shields cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Front hub seal, parts NOTE: No re-threading necessary on worn shafts. Check thread Order # Price Description / Application ABC270 $4.95 EACH Front Hub Felt Seal (For Single Wheel) Fits: A, B, D, G, GP series; Single front wheel & rowcrop models: 50, 60, 70, 70D, 520, 530, 620, 630, 720, 730, 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4040, Replaces: A1050R, AA663R, AB474R, B90R, D636R, N108188 (3.156" O.D., 2" I.D., .375" thick) USA made NOTE: 2 seals required per tractor; Sold individually. JDS1173 $9.50 EACH Front Wheel Felt Seal Fits: L, LA, M, MT, MI, 40 Replaces: L106T (2-3/4" O.D. x 1.737" I.D. x .786" thick) USA made NOTE: 2 seals required per wheel; Sold individually. JDS1176 $16.50 EACH Front Wheel Felt Retainer fits: L, LA, M, MI, (MT not single front wheel), 40, Replaces: L105T (3.50" O.D. flange, 2.800" O.D., 1.78" thru hole, 2.7315" I.D.) NOTE: Check measurements before ordering. 2 used per tractor; Sold individually. Felt seal not included. John Deere JDS1169 Chassis parts Front wheel clamp lock nuts JDS1188 $12.75 EACH $12.95 EACH Front Wheel Felt Retainer fits: A, AO, AR, BW, BWH, D, G w/ & w/out roll-o-matic, GH, GP, GPO, GW, 50, (some 60 & 70 except Standard), 520 w/ 48" - 80" adjustable axle & 38" fixed tread, (620, 630, 720, 730 w/ tricycles & no single wheels) 1520 w/ heavy duty front axle, (3010, 3020 & 4010 w/ 38" fixed tread), 4020, Replaces: D635R (3.160" O.D., 3.086" I.D.; Thru hole 2.06" dia., outer ring 3.654" dia., 1.115" o/a height) NOTE: Check measurements before ordering. 2 used per tractor; Sold individually. Felt seal not included. Front Wheel Felt Retainer fits: AN, ANH, B series, BO, BR, GN, 50 w/ narrow front, 520, 530 w/ standard or convertible roll-o-matic; 60 thru 4230 w/ single front wheel, Replaces: B89R (1.115" wide, 3.443" O.D. flange, 3" O.D., 2.875" I.D. flange, 2.060 I.D.) NOTE: Check measurements before ordering. 2 used per tractor; Sold individually. Felt seal not included. Hub cap Order # Price Hub Cap (Cast)......................................................... JDS335.........$109.95 430 Order # Price ABC255 $19.75 Application (For Axle Shaft & Front Wheel) Fits: A, BW, D, G, R series, 50 w/ wide front, 60 thru 830, some 1020 thru 2640, 3010 thru 6030 (1"-14 thread) ABC254 $19.50 (For Axle Shaft & Front Wheel) Fits: B w/ narrow front, M series, 40, 50 w/ narrow front, 320 thru 440, (520 & 530 w/ narrow front), 820 3-cyl. thru 2640 w/ regular axle (3/4"-16 UNF thread) What is back spacing? To determine back spacing lay your wheel flat on the ground with the back of the wheel facing up. Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8"). Front wheels / rims To determine the width of Wheels / Rims: Measure the inside (bead to bead) not outside to outside. Order # Price Description / Application WHS020 $74.95 3" x 12" Front Wheel Fits: John Deere Implements (3-1/8" pilot hole, 2-3/4" c.c. bolt holes) IHS195 $48.95 3" x 15" Front Wheel (Blank Center) Fits: B, BO, BR USA made NOTE: Electro-coated black. WHS019 $67.25 Fits: L, LA, LI, (M up to SN: 43250) Replaces: AL608T, L608T USA made Description size before ordering. 3" x 15" Front Wheel (6 Lug) Fits: M SN: 43251 & up, MI, MT, 40, 320, 330, 420, 430, 1010, Replaces: JD3000T (4-5/8" pilot hole, 3" bolt circle, 3-1/4" back spacing) USA made NOTE: Will also fit B, but has different offset from original John Deere B. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price WHS042 $65.60 WHS070 $86.45 WHS022 $71.50 Description / Application 6" x 15" Front Wheel (6 Lugs) Fits: Some 1010U - 4010, 1020 - 4430 & others, Replaces: JD1091 (6" bolt circle, 4.625" pilot hole, 4-3/4" back spacing) USA made NOTE: Check offset before ordering. Will NOT fit 2-cyl. John Deeres. Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits the following 2 wheel drive: Some 2030 thru 5625 Replaces: JD3229 (8" x 15", 6" bolt circle, 4.625" pilot, 4-3/4" back spacing) USA made NOTE: Will NOT fit 2-cyl. John Deeres. Front Wheel (6 Lug) w/ (4) Wheel Weight Holes Serviceable for Some MI, (MT SN: 1001 & up), 40, (420, 430 S, T, U, V, W series), 435, 440, 820 3-cyl. - 2640 Replaces: JD3002, AN241675 (1/2" wider than original, 4.5" x 16", Pilot hole = 4.625", 6" bolt circle, 4" back spacing) USA made NOTE: For 5:50 x 6:00 x 16" tires. Will NOT fit 2-cyl. John Deeres other than the listed models. Tires, tubes NOTE: Tubes are for BIAS ply tires only, not for radial tires. Price Triple rib, 4 ply Tire only (6.00 x 16") WHS049 $110.95 Triple rib, 6 ply, Tire only (6.50 x 16") WHS050 $15.25 EACH Tube only (For 5.50, 6.00, 6.50 x 16" Tires) WHS060 $37.95 EACH Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires) WHS059 $53.75 EACH Rear Tube only (For 11.2, 12.4 x 24" Tires) WHS058 $56.55 EACH Rear Tube only (For 11.2, 12.4 x 28" Tires) WHS061 $80.25 EACH Rear Tube only (For 13.6, 14.9 x 28" Tires) WHS062 $56.95 EACH Rear Tube only (For 9.5 x 32" Tires) WHS063 $64.95 EACH Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires) WHS064 $65.25 EACH Rear Tube only (For 11.2, 12.4 x 38" Tires) WHS2513 $89.95 EACH Rear Tube only (For 12.00 x 38", 13.00 x 38", 13.6 x 38", 14.00 x 38", 14.9 x 38", 15.5 x 38" tires) Front bumper weight Fits: MC, 40C, 420C, 430C Replaces: AM956T, M1023T (bumper), M1024T (tension rods) Description Order # Rear rim bolts Order # Price $2.75 Rear Rim Lug Bolt fits: A, B, H, MT, 40, 420, 430, 435, 440, 820 3-cyl., 830 3-cyl., 1010, 1020, 1520, 1530, 2010, 2020, 2240, 2440, etc.; Industrials: 300, 302, 400 (All w/ stamped steel center) (9/16"-18 NF, 1-1/8" thread length, 7/8" hex head) USA made NOTE: 7 to 9 used per rim; Sold individually. MIS063 $3.75 Rear Rim Bolt Assembly w/ Nut Fits: 28" Rear Rims - WHS004, WHS013 applications (5/8 x 18 x 2-1/2" NF Carriage bolt) USA made NOTE: 6 used per rim; Sold individually. MIS121 $0.50 Flat Washer only (For MIS063) NOTE: 6 needed per wheel; Sold individually. not listed? Call technical service. Price $52.15 Triple rib, Tire only (4.00 x 12") WHS051 $16.45 EACH Tube only (For 4.00 x 12" & 4.80 x 12" Tire) WHS052 $83.75 Triple rib, 6 ply Tire only (For 3" x 15" Wheel) (5.00 x 15") WHS053 $14.80 EACH Tube only (For 4.00, 5.00, 5.50 x 15" Tires) WHS047 $91.95 Triple rib, 6 ply Tire only (5.50 x 16") Description / Application ABC397 use. Need a tire or tube Order # Price Front Bumper Weight w/ Bolts.............................. JDS239......... $100.00 Also not for recreational WHS057 Description / Application $105.75 Description / Size STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 431 Chassis parts Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some of the following w/ 2 wheel drive: 1020 - 4430, 5065M - 5725 & others, Replaces: JD1293, JD3039 (6" x 16", Pilot hole = 4.625", 6" bolt circle, 4-3/4" back spacing) USA made NOTE: Will NOT fit 2-cyl. John Deeres. Order # WHS048 John Deere WHS043 $82.75 Tires, tubes cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Front wheels / rims cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts Rear tire inner tube valves, nut Order # Price ABC531 $5.15 EACH Rear Tire Inner Tube Valve (New Style) (Air / Water Valve) Fits: Tractor tubes w/ Internal threads NOTE: Sold individually. ABC384 $5.15 EACH Rear Tire Inner Tube Valve (Old Style) (Air / Water Valve) Fits: Tractor tubes w/ External threads NOTE: Sold individually. ABC385 $1.50 EACH Description / Application Brass Nut (For Rear Tire Inner Tube Valve) NOTE: Sold individually. Rear rims / wheels - USA made To determine the width of Rims / Wheels: Measure the inside (bead to bead) not outside to outside. Order # Price WHS040 (8" x 24") $109.95 WHS038 (10" x 24") $114.30 WHS039 (12" x 28") $175.50 Description / Application Rear Rim (Blank Center) Fits: M, MI, MT, 40, 320, 330, 420, WHS034 $199.60 430, 435, 440, 1010, 2010, etc. (10" x 34") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet. WHS004 $155.00 Rear Rim (6 Loops) Fits: 'Some' 820 3 cyl thru 2040 Replaces: AL16602, T21741 (10" x 28") WHS032 WHS1613 432 $156.95 $235.95 Rear Rim (Blank Center) Fits: H (8" x 32") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet. Flat Base Rear Rim (Blank Center) (For Stamped Steel 9 Bolt Pattern Rims) Fits: John Deere models (10" x 38") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet. Rear rims / wheels - USA made cont... Order # Price WHS013 $178.95 WHS029 (10" x 38") $199.95 WHS018 (11" x 38") $305.95 WHS036 $297.60 WHS035 $282.95 WHS037 $294.95 Description / Application Rear Rim (6 Loops) Fits: Some 820 3-cyl. - 5625 & others Replaces: AL15369, T21743 (12" x 28") NOTE: Back spacing on loops = 3-1/2" & 7-3/4". Rear Rim (Deep Drop Center) Fits: Some A, B, G WHS029 Replaces: AA3033R WHS021 $309.75 WHS018 Replaces: AA2478R, AA3043R (14" x 38") NOTE: 34" dia. center hole for cast center dish. WHS029 does not include stop block, must reuse old stop block or fabricate new one. Rear Rim (Double-Bevel) Fits: Some 520, 530, 2010, 2020, 2030, 3010 & others Replaces: B3773R (12" x 36") NOTE: Has 8 drive lugs. Rear Rim (Double-Bevel) Fits: Some 50, 60, 520, 530, 620, 630, 2010, 2510, 2520 & others Replaces: A4819R (10" x 38") NOTE: Has 18 drive lugs. Rear Rim (Double-Bevel) Fits: Some 50 thru 4430 & others Replaces: F1480R, R31490 (12" x 38") NOTE: Has 18 drive lugs. WHS024 $305.20 Rear Rim (Double-Bevel) Fits: Some 60 thru 4440 & others Replaces: F3159R, R31491 (14" x 38") NOTE: Has 18 drive lugs. WHS046 $61.75 Reinforcing Ring (For 9 bolt pattern rim) NOTE: Repairs existing 9 bolt rim. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm 800, 800A, 801 3-point hitch parts Fits: A, B, G series, 50, 60, 70 w/ 800, 800A, 801 factory 3-pt. hitch NOTE: Stop holes are angled. Order # Price ACS027 $420.00 WHS007 (12" x 26") $420.75 ACS028 (11" x 28") $420.00 ACS026 Description / Application Rear Spinout Rim (4 Rails) Fits: Some 40S, 40U, 420S, 420U, 430S, 430U, 1010 Single Row Crop, 1010 Utility Replaces: AM2108T (10" x 24") USA made Rear Spinout Rim (4 Rails) Fits: John Deere models USA made $14.95 Rear Spinout Rim (4 Rails) Fits: Some 830 3-cyl., 1530, 2040, 2150, 2240, 3010 Utility Replaces: AL24151, AR27609 (13" x 28") USA made NOTE: Rails are drilled for both style stops (1 rail for MIS109 & 1 rail for MIS108). Rear Spinout Rim Stop (For 90° Drilled Rim Rail) Fits: John Deere models USA made NOTE: Will not fit the rims that we sell. Rear Spinout Rim Stop (Parallel Drilled) Fits: John Deere models Replaces: M2334T NOTE: Use MIS109 for listed spinout rims. MIS110 $8.95 Stop Bolt (For Rear Spinout Rim Stops) Replaces: F3583R, M2335T USA made NOTE: Sold individually. Implement hex nut Fits: A, B, G, H, MT, 40H, 40T, 50, 60, 70, 420, 430, 520, 530, 620, 630, 720, 730, 1010 Replaces: A1892R, AA4963R (1-1/4" tall x 1-1/16" wide x 5/8" - 11 NC) Description JDS404 JDS1242 JDS698 Order # Price JDS348 JDS734 JDS347 JDS1488 Description Sway Chain Assembly Fits: A, B, G, 50, 60, 70 w/ 800, 800A, 801 $100.00 factory 3-pt. hitch Replaces: Assembly includes: (1) Chain, PAIR Replaces: 31602A, (1) Large Clevis, Replaces: 31606A w/ drilled pin, Replaces: 14779, Subs DA2632A & cotter pin (1) Small Clevis, Replaces: 31603A, w/ drilled pin, Replaces: RV695A, DA4560A & cotter pin NOTE: 2 used per tractor. JDS344 $58.50 EACH JDS346 $24.95 Large Clevis w/ JDS345 Long Drilled Pin & Cotter Pin, Replaces: 31606A (clevis), 14779, DA2632A JDS345 $8.50 Long Drilled Pin, Replaces: 14779, DA2632A JDS348 $19.95 Small Clevis w/ JDS347 Short Drilled Pin & Cotter Pin, Replaces: 31603A (clevis), DA4560A, RV695A (pin) JDS347 $6.50 Short Drilled Pin Replaces: RV695A, DA45600A JDS404 $79.95 3-Point Evener Bar Replaces: 31583A USA made JDS1242 $39.95 Upper Link Knuckle Replaces: P811A USA made JDS698 $42.95 EACH 3-Point Hitch Push Rod, Replaces: 32570A USA made NOTE: 2 used per hitch; Sold individually. JDS734 $29.95 EACH 3-Point Hitch Push Rod Swivel Replaces: 32571A USA made NOTE: 2 used per hitch; Sold individually. JDS1488 $24.95 EACH 3-Point Hitch Draft Link Pin Replaces: AA5365R, A2510R, B2198R (.750" O.D.) USA made NOTE: 2 used per hitch; Sold individually. Price Implement Hex Nut................................................. JDS225......... $4.95 NOTE: Mounts to front & rear axle housings. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Chassis parts MIS109 $16.50 JDS345 John Deere MIS108 $450.50 JDS346 Order # $435.00 Rear Spinout Rim (4 Rails) Fits: Some 420 - 2440 Replaces: AM3202T, AL60764 (12" x 28") USA made WHS008 JDS344 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Rear spinout rims, parts 433 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Top-links, parts Order # Price FDS023 Description / Application $23.50 FDS346 Top-Link Category 1 Adjustable w/ forged ends & 3/4" hole Serviceable for 40 & up (16" tube length) $39.45 Top-Link Category 2 Adjustable w/ forged ends & 1" hole (16-3/4" tube length) JDS117 $259.00 JDS117HK Top-Link w/ Hook End, Pin & Chain Fits: 520, 530, 620, 630, 720, 730 Replaces: AF2798R, AF2799R, AF2873R, AR21917R NOTE: Adjustable from 211/2" to 30" center of pin to center of hook opening. Uses .750" dia. pin in one end & 2" dia. ball in hook end. JDS328 JDS397 ABC530 John Deere Chassis parts $108.50 Hook End only, Replaces: AR46298, Casting # R26813 (1-1/4" thread) JDS1796 $14.95 NEW! Top-Link Handle Replaces: R42495 JDS078C $88.50 Swivel End only, Replaces: AR32531 (1-1/4" thread) ABC530 $8.50 Ball only Category 1, Replaces: F2680R (3/4" hole; Fits into a 2" socket) ABC532 $9.50 Ball only Category 2, Replaces: F2681R (1" hole; Fits into a 2" socket) JDS1798 $19.95 Pin (Top-Link to Tractor) Also fits Industrials: 500, (500A up to SN: 123113), 600, Replaces: AR67880 (0.875" O.D., 0.500" handle dia., 5.412" o/a length, 0.271" hole dia.) NOTE: Zinc plated. Fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, (4450 up to SN: 18905), Replaces: R26811, R53762, R47072, R32119, R26901 Order # Price Description JDS117HK $95.00 Hook only, Replaces: AR21917R, F2820R (1-1/4" thread) JDS328 $11.95 Chain only, Replaces: F2825R JDS397 $8.85 Pin only, Replaces: A3581R, AF2799R (3/4" O.D.) ABC530 $8.50 Ball only Category 1. Replaces: F2680R (3/4" hole; Fits into a 2" socket) ABC532 $9.50 Ball only Category 2, Replaces: F2681R (1" hole; Fits into a 2" socket) JDS078 $198.50 Top-Link with Hook End & Pin Fits: 2510, 2520, 3020, 4000, 4020 up to SN: 250000, 4030, 4230 Replaces: AR34208 NOTE: Tractor end is made for 7/8" pin. JDS1796 JDS078C ABC530 ABC532 JDS1798 JDS078 Top-link components The following parts (Sold separately) fit JDS078 Top-Link Assy: 434 JDS078A Transport Hook (Top-Link to Tractor).................. JDS965......... $15.95 JDS117 Top-Link Assy. & original Top-Links: JDS078A Description Description The following parts (Sold separately) in the next column fits Price Price ABC532 JDS117 Top-link components Order # Order # 3-point top-link pins, parts Order # Price ABC1431 $1.90 ABC1427 $3.25 ABC1429 $4.25 MIS119 $0.35 ABC1433 $2.15 Description / Application 3-Point Top-Link Pin Fits: John Deere models w/ a Category 1, 3-point hitch (3/4" O.D., 2-3/4" usable length, 4-5/8" o/a length) Category 1 3-Point Top Link Pin Fits: John Deere models w/ a Category 1, 3-point hitch (3/4" O.D., 4-3/4" usable length, 6-1/2" o/a length) Category 2 3-Point Top Link Pin Fits: John Deere models w/ a Category 2, 3-point hitch (1" O.D., 4-1/4" usable length, 6" o/a length) 3-Point Lynch Pin fits: John Deere models equipped w/ a 3-Point Hitch using a .420" dia. pin, Replaces: AM1752T (1-5/8" usable length) 3-Point Lift Arm Category 2 to a Category 1 3-Point Hitch Reducer Bushing Fits: John Deere models w/ a Category 2, 3-point hitch switching to a Category 1, 3 -point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm JDS547 JDS549 Top-links, parts cont... Fits: 40, 320, 330, 420, 430, 435, 440, (1010 except Rowcrop, Crawlers) (All w/ 24" or 28" rear tires) JDS547 Replaces: M2653T, M2437T JDS754 Replaces: M2084T USA made Order # JDS221 Price Adjustable 3-Point Upright Assembly Fits: 520, 530, 620, 630, 720, 730 except Hi-Crop JDS754 Description Order # Description / Application $259.95 Price Adjustable Lift Link Assy.....................................JDS547.......$139.95 EA Non-Adjustable Lift Link Assy............................JDS549.......$74.95 Bolt (For Lift Link Fork)........................................JDS754.......$16.95 Fits: 40H, (40S SN: 69582 & up), 40U SN: 62734 & up, 40V, 320, 330, 420H,S,U,V, 430H,S,U,V, 1010RS,UT Replaces: M2733T, M2734T (Spring: 8-1/2" o/a length, 1" O.D.; Hook: 2-3/4" long, 1-3/4" wide) USA made JDS223 JDS222 JDS830 JDS1485 JDS233 JDS234 JDS221 components The following parts (Sold separately) fit JDS221 Adjustable Description Order # Price 3-Point Lower Link Spring & Hooks....................JDS1644...... $20.75 Order # Price JDS222 $16.95 Handle w/ Pin, Replaces: F2676R JDS223 $69.95 Top Yoke w/ Pivot, Replaces: AF2704R JDS830 $9.75 Pin, Replaces: F2679R JDS1485 $148.50 Leveling Screw & Bottom Yoke Assembly JDS233 $57.00 Leveling Screw, Replaces: AF2706R, AF2707R (19-3/8" long) JDS234 $98.95 Bottom Yoke, Replaces: F2670R Order # Price Crank Handle w/ Roll Pin ......................................JDS571.........$31.95 Chassis parts w/ Pin, Replaces: F2670R, AF2706R, AF2707R JDS569 Description Description John Deere JDS571 (For Adjustable Upright) Fits: 40H, V, W, 320, 330, 420, 430, 435, 440, 1010, 3010 Utility, 3020 Utility, JD350 Crawler, JD450 Crawler, JD500 Loader / Backhoe JDS571 Replaces: M2438T JDS569 Replaces: M2735T 3-point upright parts: Crank Handle Lock (For Adjustable Upright)....JDS569.........$15.75 (For Adjustable Upright) Fits: 40U, 320U, 330U, 420U, 430U & 1010 Grove, Orchard, Utility Replaces: M2492T Description Order # Price Crank Handle Lock ..................................................JDS889.........$34.95 Fits: 420I, W, 430I, W, 435, 440I, 1010RU up to SN: 31000, Replaces: M1993T, M3140T, M3217T, 11H237A, 14H534A, 24H1392A (1 end = .875" O.D., 1 end = 1" O.D., 5-1/2" long) USA made Description Order # Price 3-Point Load Link Trunion Pin w/ Hardware....JDS1436.....$62.95 EA NOTE: Connects 3-point draft link arm to the drawbar assembly. 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Top-links, parts cont... 435 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Chassis parts 3-point return springs, part cont... 3-point lower lift arms, parts Order # Price JDS2743 (LH) $138.50 JDS2737 (RH) JDS1639 JDS1641 JDS246L (LH) Description / Application NEW! 3-Point Rear Draft Link End Fits: 2840, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 600 Industrial $138.50 JDS2743 Replaces: AR26554, R106781, RE44094; Casting #R26907 (Category 2) JDS2737 Replaces: AR26555, R106780, RE44093; Casting #R26911 (Category 2) $23.50 EACH $23.50 EACH Draft Link Pivot Pin Fits: 520, 530, 620, 630, Replaces: A5715R USA made NOTE: Yellow zinc. 2 used per tractor; Sold individually. Draft Link Pivot Pin Fits: 720, 730, (3010, 3020 up to SN: 81039) Industrial: 500 up to SN: 81039 Replaces: F2781R, R40516 USA made NOTE: Yellow zinc. 2 used per tractor; Sold individually. $234.95 3-Point Lower Lift Arm Fits: 520, 530, 620, 630, 720, 730 JDS246R $234.95 JDS246L Replaces: AF2714R, AF2716R (RH) JDS246R Replaces: AF2715R, AF2716R 3-point return springs, part Order # Price JDS686 $49.95 JDS684 JDS688 436 $49.95 $49.95 Description / Application 3-Point Return Spring fits: 40S up to SN: 69581, (40H, T, V, W), (420 - 430H, T, V), Replaces: M2118T (28 coils, 9/32" spring dia., 2" O.D. x 11" long) USA made NOTE: Green paint. 3-Point Return Spring fits: 40S SN: 69582 & up & 40U up to SN: 62733; LH side: 320S, 330S, 420S, 430S, Replaces: M2421T (48 coils, 1/4" spring dia., 17-3/8" long) USA made NOTE: Green paint. 3-Point Return Spring fits: 40U SN: 62734 & up, 320U, 330U, 420U, 430U; RH side on tractors w/ dual touch-o-matic: 320S, 330S, 420S, 430S, Replaces: M2593T (28 coils, 9/16" spring dia., 2-3/8" O.D. x 11 3/4" long) USA made NOTE: Green paint. Order # Price Description / Application JDS682 $49.95 EACH 3-Point Return Spring Fits: 420I, 420W, 430W, 435 Replaces: M3168T (32 coils, 1/4" spring dia., 2" O.D. x 12" long) USA made NOTE: Green paint. LH & RH are the same; Sold individually. JDS680 $49.95 3-Point Return Spring Fits: 520, 530, 620, 630, 720, 720D, 730, 730D Replaces: F2897R (24 coils, 1/4" spring dia., 15-1/4" long) NOTE: Green paint. JDS700 $19.95 Rockshaft Return Spring Link Fits: 620 Rowcrop, 630 Rowcrop Replaces: A5606R USA made Sway blocks Order # Price Description / Application JDS087 (LH) $36.75 JDS086 (RH) $36.75 JDS087 JDS086 JDS494 $4.95 EACH Bushing (Draft Link Lock Spacer) Fits: John Deere models Replaces: F2786R NOTE: (2) JDS494 used per sway block; Sold individually. JDS011 (LH) $57.95 JDS087 JDS086 JDS010 (RH) $57.95 Sway Block Fits: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855; Industrials: 300, 300B, 310, 400 Replaces: T30277 Fits: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855 Industrials: 300, 300B, 310, 400 Replaces: T30276 JDS013 (LH) $62.50 JDS012 (RH) $62.50 Sway Block Fits: 520, 530, 620, 630, 720, 730 JDS087 Replaces: F2785R, R21718 JDS086 Replaces: F2784R, R21717 USA made Sway Block Fits: 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 JDS013 Replaces: R39513 JDS012 Replaces: R39512 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price JDS031 (LH) $50.00 JDS033 (LH) $50.00 JDS015 (LH) JDS014 (RH) Description / Application Sway Block Fits: 3010 Replaces: R27711 NOTE: Close Out. Sway Block Fits: 4010 Replaces: AR31561, R26816, R32324 NOTE: Close Out. Price $74.95 $88.50 Sway Block Fits: 4520, 4620, 4630, 5020, 6030, 7020, 7520 JDS015 Replaces: R48816 JDS014 Replaces: R48815 USA made JDS028TLB $199.35 Price JDS173L (LH) $191.40 JDS173R (RH) $191.40 JDS551 (LH) $233.95 $233.95 NOTE: Does not include mounting hardware. Order # Price JDS360 $1,549.90 JDS1424 $1,549.90 Elephant Ear w/ Wear Strip (A5714R) Fits: 520, 530, 620, 630 JDS173L Replaces: AA6610R, Casting # A5713R JDS173R Replaces: AA6609R, Casting #A5712R NOTE: Like original. Elephant Ear (Draft Link Support) Fits: 720, 730 JDS551 Replaces: F2779R JDS553 Replaces: F2778R USA made NOTE: Not machined for wear strip. Top-Link Bracket only Fits: A SN: 584000 & up, B SN: 186134 & up, G SN: 18700 & up, 50, 60, 70 w/ exposed rockshaft Category 1 OEM style 3-point hitch kits Sway Block Fits: 4440, 4450, 4455 Replaces: R61254, R104901 NOTE: Close Out. Description / Application 3-Point Hitch Conversion w/ Top-link Bracket Fits: A SN: 584000 & up, B SN: 186134 & up, G SN: 18700 & up, 50, 60, 70 w/ exposed rockshaft Category 2 Application Fits: 520, 530, 620, 630 Includes: (2) - adjustable uprights (JDS221), (1) - LH lower lift arm (JDS246L), (1) - RH lower lift arm (JDS246R), (1) - LH elephant ear (JDS173L), (1) - RH elelphant ear (JDS173R), (1) - top link (JDS117), (1) LH sway block (JDS087), (1) - RH sway block (JDS086), (4) - bushings (JDS494) NOTE: Does not include mounting hardware. Fits: 720, 730 Includes: (2) - adjustable uprights (JDS221), (1) - LH lower lift arm (JDS246L), (1) - RH lower lift arm (JDS246R), (1) - LH elephant ear (JDS551), (1) - RH elelphant ear (JDS553), (1) - top link (JDS117), (1) LH sway block (JDS087), (1) - RH sway block (JDS086), (4) - bushings (JDS494) NOTE: Does not include mounting hardware. Adjustable stabilizer bar (For tractors w/ Category I 3-point) Adjustable from 27-1/2" to 37" length, 23" center tube length, 7/8" threaded ends, 7/8" pin holes Description Order # Price Adjustable Stabilizer Bar ...................................... ABC2010......$24.00 NOTE: Adjustable ends for desired length. Normally 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 437 Chassis parts Order # Description / Application $650.00 $74.95 Elephant ears JDS553 (RH) Order # JDS028 John Deere JDS091 (RH) 3-point hitch kit, part - USA made All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Sway blocks cont... All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Drawbars, parts Order # JDS1488 JDS1147 JDS395 $24.95 $24.95 $124.95 $36.80 EACH Chassis parts / Miscellaneous John Deere JDS315 Price JDS316 JDS320 FDS022 $37.90 EACH $12.50 Mylar decals - USA made Drawbar Pivot Pin w/ Handle Fits: A SN: 561903 & up, B SN: 186134 & up, (M, MT w/ optional swinging drawbar), 40S, T, V, 50, 60, (60 Standard SN: 6043000 & up), 320S, 330S, 420S, T, V, 430S, T, V, 520, 530, (620 up to SN: 6213099), 1010 single Row Crop Replaces: A2510R, AA5365R, B2198R (.750" O.D.) USA made NOTE: 1 used for drawbar. & painted. Paint must be completely dry prior to installation (usually 3 - 4 weeks). Wash area with soap & water (new paint included) on which decal is to be placed. FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to border of design where possible prior to removing white backing paper. Lightly spray the area with window cleaner (do not use window cleaner in aerosol can). Peel white backing paper from decal and place in position. Squeegee window cleaner from under decal beginning in center and working outward. If air bubbles occur, puncture with pin & smooth down. Please note: These decals have been printed on a tough mylar film using mylar ink. A pressure sensitive adhesive has been employed on the back of the mylar to insure good adhesion to any clean, hard surface. FOR VINYL CUT DECAL (NO FILM BETWEEN LETTERING) SPECIAL ORDER ONLY: Peel backing paper from decal. The Drawbar Fits: M, MT Replaces: AM404T USA made NOTE: Exact of original. decal will be stuck to the application paper. Align the decal using the design, not the application paper, and firmly press decal into place. Slowly remove the application paper starting at one corner. Please note: The colors are fused into the vinyl eliminating stacking. Drawbar Lift Link Fits: M (w/ 24" tires) Replaces: AM470T (11" c.c. pin holes) NOTE: 2 used per tractor; Sold individually. Caution: Inspect all decal pieces before applying to tractor. NO REFUNDS on mylar decals if applied to surface and/or if damaged. NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water. Drawbar Lift Link Fits: M SN: 45344 & up (w/ 26" tires), MT (w/ 34" tires) Replaces: AM1081T, AM1568T (14" c.c. pin holes) NOTE: 2 used per tractor; Sold individually. DEC457 Drawbar Lift Link Pin w/ Spring Fits: M, MT Replaces: AM504T (pin) & M687T (spring) (2.175" length to head, 2.375" o/a including head, .400" dia.) $46.95 $29.99 Drawbar Lock Category 1 (For FDS022) 438 INSTRUCTIONS: Have the pitted area filled, sanded smooth Drawbar Pivot Pin w/ Handle Fits: G SN: 18700 & up, 70, 620 SN: 6213100 & up, 630, 720, 730 Replaces: AF1318R, AF3759R, F856R USA made Standard 3-Point Drawbar Fits: 40 & up Category 1 (1" x 2-1/2" x 26", 7/8" pin size) FDS211 (Unless otherwise noted): Description / Application DEC239 DEC037 DEC034 Order # Price Application DEC459 $6.00 4-legged "Leaping Deer" (3-5/8" tall x 5" wide, Green deer w/ yellow background) DEC457 $12.50 4-legged "Leaping Deer" (6" wide x 5-3/16" tall; Yellow w/ black deer, Vinyl cut) Early Stenciled Hood (1923-1938) DEC001 $36.00 A DEC003 $36.00 B DEC009 $40.00 D DEC005 $36.00 G Styled Hood (1939-1946) DEC002 $36.00 A DEC004 $36.00 B DEC010 $36.00 D (1939 & up) DEC241 $36.00 G (1939 & up) DEC018 $36.00 H DEC016 $30.00 L DEC017 $30.00 LA STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price Application Tractor Legacy Series: John Deere New Generation & Generation II Tractors by John Dietz Gives the history, models, variations & specifications for New Generation tractors from 1960 thru the early 1980's (Hdbd., 8-3/4" x 11-1/4", 128 pgs.) Styled Hood (1947-1952) DEC239 $36.00 A DEC023 $36.00 AR DEC240 $36.00 B DEC241 $36.00 G DEC019 $36.00 M DEC020 $36.00 MT DEC021 $37.00 MC Description Order # Price JD New Generation & Generation II................... BOK1744......$24.95 John Deere Data book - Printed in USA DEC044 $40.00 R DEC038 $36.00 40 DEC039 $36.00 50 DEC040 $36.00 60 DEC041 $36.00 70 gas DEC042 $40.00 70 diesel DEC043 $40.00 80 diesel DEC024 $36.00 320 DEC025 $36.00 420 (Green decals) Hood w/ Yellow Stripe DEC440 $94.00 420 (Yellow decals) Green tractor Vinyl Cut DEC032 $40.00 430 DEC026 $36.00 520 DEC033 $40.00 530 DEC027 $36.00 620 DEC034 $40.00 630 DEC028 $36.00 720 gas DEC029 $40.00 720 diesel DEC035 $40.00 730 gas DEC036 $44.00 730 diesel DEC030 $40.00 820 diesel DEC037 $44.00 830 diesel DEC449 $69.65 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 gas, diesel (Syncro-Range or Powershift) DEC1158 $79.00 3010 gas, diesel (Syncro-Range only) Complete Set Vinyl Cut Price Application JD4 $31.95 DEC1752 $79.00 NEW! 3020 gas, diesel Complete Set Vinyl Cut NOTE: Contains both gas & diesel decals. Will work for Powershift, but does not have the shifter decal. A SN: 499000 & up, B SN: 96000 & up, (D SN: 143800 & up), G SN: 13000 & up, H, M, MT JD10 $31.95 50, 60, 70 gas JD16 $31.95 520, 530, 620, 630, 720, 730 series gas JD201 $34.95 John Deere Collection: 40 series, 80, 320, 330, 420, 430, 440, 435, 440 diesel, 720 diesel, 730 diesel, (820, 830 2 & 3-cyl.) NOTE: Does not have Crawler information. Includes electrical diagram for all except 435, 440 Diesels. JD47 $31.95 Fits: 850, 950, 1050 NOTE: 48 pages. JD21 $31.95 Fits: 1010, 2010 NOTE: 56 pages. JD203 $34.95 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 4010 diesel Complete Set Vinyl Cut DEC413 $79.00 4020 gas, diesel Complete Set Vinyl Cut NOTE: If needed for gas, customer must trim off "diesel". DEC1761 $79.00 NEW! 4020 gas, diesel (Syncro-Range only) Complete Set Vinyl Cut NOTE: Will work for the Powershift, but does not have the shifter decal. If needed for gas, customer must trim off 'diesel' Order # Price JD Data Book............................................................ BOK048........$19.95 I & T Shop Service™ manuals - Printed in USA An I & T Shop Service™ manual tells you how to take a tractor apart, how to fix it and how to put it back together again. These are authentic manuals that deal with repairs in the language of a mechanic with an easy to use format. They include valuable information as to specifications, torques, etc. illustrated by exploded views and photos. If you are in serious repairs or restoration, you need an I & T Shop Service™ manual. It will offer many short cuts and save you time! JD4 Order # STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com JD16 JD47 Miscellaneous $79.00 Description John Deere DEC411 John Deere Tractor Data Book TwoCylinder models through 1960 by Lorry Dunning This well researched book offers everything from serial numbers, annual production and technical data to optional accessories, paint codes, some decal placement information & much more (Sftbd., 4-1/2" x 7-1/2", 176 pgs., 50 b&w) All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Farm tractor color historical books Mylar decals - USA made cont... JD203 439 All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. John Deere Miscellaneous Operator manual reprints - Printed in USA Operator manual reprints - Printed in USA An Operator’s manual (reprints only) sometimes referred to as cont... the Owner’s manual is the manual that came with the tractor. It is the manual that was given to the ultimate consumer by the manufacturer. It can be compared to the manual you receive in the glove box of a new car. This manual gives the owneroperator instructions, shift patterns, capacities (anti-freeze, Order # Price REP2756 $24.95 60 Rowcrop, Replaces: OMR2016, OMR2034 NOTE: 120 pages. REP2716 $24.95 70 gas, Replaces: OMR2035 NOTE: 120 pages. REP2714 $24.95 70 diesel Pony start, Replaces: OMR2032 NOTE: 128 pages. REP2760 $24.95 420 tricycle only, Replaces: OMT34756 NOTE: 72 pages. REP2758 $24.95 430 tricycle, Replaces: OMT63558 NOTE: 86 pages. REP2722 $24.95 430 Rowcrop Utility Replaces: OMT65558 NOTE: 80 pages. REP2718 $24.95 520 gas, All fuel Replaces: OMR2051 NOTE: 96 pages. REP2724 $24.95 530 gas, All fuel Replaces: OMR20710 NOTE: 122 pages. crankcase, etc.) and adjustment procedures (brakes, clutch, etc). This is a very useful and valuable tool in operating your tractor. REP107 REP112 REP113 REP1410 Order # Price REP107 $48.10 Unstyled A (Adjustments, Routine Maintenance & Parts List) REP110 $48.10 Styled A up to SN: 583999 (Operation) REP111 $48.10 Styled A SN: 584000 - 647999 (Operation) REP112 $48.10 Styled A SN: 648000 & up (Operation) REP1410 $48.10 REP2740 $36.95 Fits: A, B, G, R, 50, 60 series Replaces: SM2011 (Hydraulics service) NOTE: 120 pages. 620 Row Crop, Standard (Both SN: 6213100 & up), Replaces: OMR2078 REP1411 630 gas, All fuel Replaces: OMR20718 REP108 Unstyled B (Adjustments, Routine Maintenance & Parts List) REP2720 $24.95 720 diesel up to SN: 7214899 w/ Pony start Replaces: OMR2057 REP2748 $24.95 Styled B series SN: 60000 - 201000 Replaces: OMR2005 NOTE: 72 pages. REP2726 $24.95 730 gas, Replaces: OMR20697 NOTE: 120 pages. REP2752 $24.95 Styled B series SN: 201000 & up Replaces: OMR2006 NOTE: 72 pages REP2728 $24.95 REP1404 $39.95 Unstyled D, DI SN: 119100 - 143799 Replaces: DIR225 730 diesel electric start Replaces: OMR20700 NOTE: 124 pages. REP2730 $24.95 REP2746 $24.95 Styled D SN: 143800 & up Replaces: OMR2008 NOTE: 64 pages. 2010 Rowcrop SN: 29001 & up Replaces: OMT18596 NOTE: 60 pages. REP2732 $24.95 3010 Standard & Rowcrop gas, diesel Replaces: OMR32385 NOTE: 84 pages. REP2736 $24.95 3020 gas, Standard; SN: 68000 & up; Standard, Rowcrop, Hicrop Replaces: OMR41753 NOTE: 86 pages. $39.95 Application Application REP109 $39.95 Unstyled G (Adjustments, Routine Maintenance & Parts List) REP113 $48.10 Styled G (Operation) $36.45 REP1407 $39.95 GP, GPO, Replaces: DIR104 REP114 $48.10 H (Operation) REP028 $62.15 L, LA, LI, LU Engine (Compilation of Facts & Service Info) NOTE: Includes electrical wiring diagram. REP2734 $24.95 REP2744 $24.95 M, Replaces: OMTM31051 NOTE: 80 pages. 4010 gas, diesel Standard & Rowcrop Replaces: OMR28879, OMR32129 NOTE: 80 pages. REP2738 $24.95 REP2742 $24.95 MT, Replaces: OMTMT21051 NOTE: 78 pages. 4020 Standard, Rowcrop gas, LP, diesel Replaces: OMR39669, OMR41754 NOTE: 84 pages. REP2643 $14.95 Char-Lynn Power Steering (Owner's manual) NOTE: Includes installation, operation, maintenance & trouble shooting information on the pump & torque generator. REP2750 $24.95 40, Replaces: OMT2455 NOTE: 102 pages. REP2754 $24.95 50, Replaces: OMR2033 NOTE: 120 pages. 440 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Engine rebuild repair DVD USA made A Parts manual (reprint only) has exploded views of all parts on the tractor. With numbered pictures giving you great detail This video shows how to completely rebuild on assembly and disassembly. It also gives you a guide, with the tractors' engine. You will see the engine numbers, for ordering parts, and makes you seem much more disassembled down to the bare block and informed when talking with a dealer. Many service manuals, then rebuilt step by step in an easy format. after telling you how to disassemble & repair in detail, will simply say "reassemble". If you have your PTO in the wash tank, in pieces, without notes, you have a problem. The parts manual you can see immediately how it all goes back together. You Tune-Up repair DVD USA made need a parts manual! This video includes rebuilding the carburetor can help you out with an exploded view of the PTO unit, and and distributor, oil and filter change, brake adjustment and more! REP1399 REP1401 REP1405 Powr-trol & power lift repair DVD USA made REP1409 This video will help you solve common Order # Price REP1399 $58.65 REP1400 $48.10 Styled A, AH, AN, ANH, AW, AWH (All SN: 477000 & up), (AO, AR SN: 272000 & up), Replaces: PC675 NOTE: Includes electrical wiring diagram. B, BN, BNH, BW, BWH (All up to SN: 59999), BO, BR Replaces: PC676 Styled B, BN, BNH, BW, BWH (All SN: 60000 & up), Replaces: PC330 NOTE: Includes electrical wiring diagram. $48.10 D, DI up to SN: 143799 Replaces: PC658 REP1403 $39.95 Unstyled D, DI SN: 30400 - 119099 (Instructions & parts list manual) Replaces: DIR108 REP1405 $48.10 Styled D SN: 143800 & up Replaces: PC659 NOTE: Includes electrical wiring diagram. REP1406 $58.65 G, GH, GM, GN, GW Replaces: PC369 NOTE: Includes electrical wiring diagram. REP1408 $48.10 H, HN, HNH, HW, HWH Replaces: PC304 NOTE: Includes electrical wiring diagram. REP1409 $93.50 420, 430 Replaces: PC505 REP1412 $78.40 720 gas SN: 7214900 & up, 730 gas Replaces: PC530 NOTE: Includes electrical wiring diagram. POWR-TROL or Power Lift hydraulic system. Types of oil and correct levels are also discussed. Order # Price Application VID06D $20.00 A, B, G, 50, 60, 70 (Engine Rebuild) VID22D $20.00 M, MT, 40, 320, 330, 420, 430, 440 (Engine Rebuild) VID07D $20.00 A, B, G, 50, 60, 70 (Tune-Up) VID23D $20.00 M, MT, 40, 320, 330, 420, 430, 440 (Tune-Up) VID21D $20.00 A, B, G, 50, 60, 70 (Powr-Trol & Power Lift Repair) Deluxe tractor umbrellas ABC2369 ABC2362 Description Four oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting brackets, zinc plated for rust resistance and lasting appearance. 54" square cover is made of durable polyester material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform. Order # Price Yellow Deluxe Umbrella w/ Brackets ................. ABC2369......$192.80 White Deluxe Umbrella w/ Brackets ................... ABC2362......$192.80 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 441 Miscellaneous REP1402 problems with the John Deere John Deere REP1401 $48.10 Application All parts are aftermarket parts, not original equipment, and are manufactured by third parties for use in John Deere equipment. John Deere is a registered trademark of Deere & Company. Steiner Tractor Parts is not associated with Deere & Co. Parts manual reprints - Printed in USA