Frac Tank Liners Floating Insulated Covers

STRENGTH • COMMITMENT • GUARANTEED CONTAINMENT • SINCE 1981
Frac Tank
Liners
24 mil
30 mil
40 mil
Floating
Insulated
Covers
1-800-280-0712 • 541-447-0712
www.BTLLiners.com
PRODUCTS AND SERVICES
GEOMEMBRANES
•
•
•
•
CONSTRUCTION FABRICS
Polyethylene (Reinforced 12 mil to 40 mil)
Geotextiles (Woven and Non-woven)
•
•
•
Geogrids
Polypropylene (Reinforced 36 mil to 45 mil)
Polyurethane (Reinforced 23 oz. to 38 oz.)
EIA (Reinforced 36 mil to 45 mil)
FABRICATED PRODUCTS
•
•
Pond, pit, lagoon, leach pad liners
•
•
Floating covers, leach pile covers
•
•
•
The Green Geotextile®
(100% recycled non-woven, LEED qualified)
Geonets
Geowebs
APPLICATIONS
•
•
Oil & Gas drill sites
Custom tarps & covers
(for trucks, trailers, soil piles, etc.)
•
In-ground and above ground
Potable water grade cistern liners / tank liners
SERVICES
Containment liners
(for hydrocarbons & hazardous materials)
Oil containment boom
•
•
•
Large factory fabricated panels up to
150,000 sq. ft. in a single piece.
Freshwater, produced waters,
flowback containment
Installation supervision/assistance
Consultation on material selection
Factory / Laboratory analysis and
recommendations
Approved by NRCS/USDA 210 Eng-Practice
standard 521, Pond Liner.
LINER SPEC
COMPARISON CHART
MATERIAL
Tongue Tear
Machine Direction
ASTM D 751
(lbs)
Tongue Tear
Transverse Direction
ASTM D 751
(lbs)
Grab Tensile
Machine Direction
ASTM D 751
(lbs / %)
BTLTM-12
BTLTM-24
PPLTM-24
BTLTM-30
PPLTM-36
BTLTM-40
60 mil HDPE
40 mil HDPE
45 mil EPDM
40 mil PVC
45 mil PVC
62*
83*
74
45*
108
153
182
103
21
22
11
66*
86*
94
50*
134
174
164
106
10
18
12
205 / 62**
335 / 28**
449 / 17
400 / 30*
666 / 28
740 / 71**
586 / 186
337 / 183
323 / 685
306 / 253
193 / 308
* ASTM D 5844-01
** ASTM 5034
Grab Tensile
Mullen Burst
Transverse Direction
Strenth
ASTM D 751
ASTM D 3786
(lbs / %)
(psi)
140 / 66**
388 / 36**
405 / 18
490 / 40**
519 / 21
650 / 68**
582 / 188
383 / 197
128 / 302
323 / 239
193 / 329
Third party r-valve tested by Architectural Testing, Inc.
300
740
818
800
993
1220
541
346
220
232
226
Water Vapor
Transmission
ASTM D 96
(g / m2 per day)
Low Temperature
Cold Crack
ASTM D 2136
(°F)
0.288**
0.243
0.74
0.142
0.707
0.475
0.01
0.01
0.29
1.54
1.8
-85
-85
-65
-85
-65
-85
-20
-20
-49
>-40
>-40
POLAR CAP by BTL
•
•
•
•
Makes a good liner GREAT
Superior flexibility and toughness
Improves UV resistance
Increases seam strength
•
Insulated covers prevent
freezing of stored liquids
•
Minimize evaporation of
hydrocarbons from holding tanks
•
•
Finished covers are flexible to -85° F
•
3rd party quality tested for
thermal resistance
•
Designed for ease of re-use and
cost effectiveness
•
Fabricated in the USA from
100% North American materials
Finished covers are easily
folded and rolled
MISSION STATEMENT
To continually strive to produce the
highest quality line of fabric products in
the flexible membrane market.
To offer the use of our technical expertise,
judgement and equipment in the design and
construction of finished products that will
meet or exceed all of the specifications for
each project of which we are a part.
1-800-280-0712 • 541-447-0712 • www.BTLLiners.com