Price List 2016 - Cloeren Technology GmbH

Transcription

Cloeren Technology GmbH
Preparation systems
and
Materialography - Supplies
Price List
2016
2
Your contacts
General management
Heinz - Hubert Cloeren




+49 (0) 2432 - 8902513
+49 (0) 2432 - 8902519
+49 (0) 174 - 18 66 272
[email protected]
Commercial management
Martina Cloeren
 +49 (0) 2432 - 8902510
 +49 (0) 2432 - 8902519
 [email protected]
Order processing
Heidi Schaffrath
 +49 (0) 2432 - 8902516
 +49 (0) 2432 - 8902519
Stephanie Hussung
 +49 (0) 2432 - 8902512
 +49 (0) 2432 - 8902519
Accounts department
Natascha Cloeren
 +49 (0) 2432 - 8902518
 +49 (0) 2432 - 8902519
Application laboratory and contract materialography
Michael Schlösser
 +49 (0) 2432 - 8902514
 +49 (0) 2432 - 8902519
Oliver Müller
 +49 (0) 2432 - 8902514
 +49 (0) 2432 - 8902519
Sales engineer
Alexander Winnicki




Svenja Deschl
 +49 (0) 1590 - 4399372
 +49 (0) 2432 - 8902519
+49 (0) 2166 - 675350
+49 (0) 2432 - 8902519
+49 (0) 178 - 3023024
[email protected]
3
Foreign branches
Italy:
Cloeren Technology s.r.l.
Andrea Bigi
Via Minatori di Marcinelle,1
I - 35010 Ronchi di Villafranca PD





+39 (0) 49 - 213 91 48
+39 (0) 49 - 213 91 50
+39 (0) 320 024 73 43
[email protected]
www.cloeren-srl.com
Hungary:
CS 80 Kft.
Zsuzsanna Bottyán
Csömöri út 80.
HU - 1161 Budapest
 +36 (0) 1 - 401 3091
 +36 (0) 1 - 401 3094
 www.metallografia.hu, www.cs80.hu
Turkey:
Mikrostest Endüstri Cihazlari
Mehmet Akif Kilic
Pazarlama Sanayi ve Ticaret Ltd. Sti.
Yali Mah, Maresal Fevzi Camak Cad. No:50/25 K:3
TR - 34844 Maltepe Istanbul
 +90 (0) 216 577 69 09
 +90 (0) 216 577 69 06
 www.mikrotest.com.tr
In other countries we will deliver from Germany.
4
Catalogue Index
Training
Contract Materialography
Damage Analysis
New Products
6-7
8
8
9
Wet cut-off grinding wheels
Standard cut-off grinding wheels
10
Cut-off grinding wheels for NE-metals,
10
plastics and Titanium and hardened steels
Cut-off grinding wheels High Quality
10
Universal cutting disc
11
Precision cut-off grinding wheels
11
Diamond cut-off wheels
Diamond cut-off wheels
CBN cut-off wheels
Corrosion protection coolant
12
12
13
Embedding materials
Parameter Warm embedding materials
Warm embedding materials
Cold embedding materials
Epoxy resins
Dyeing agent for Epoxy resins
Pigmented Epoxy resins
Embedding moulds
Embedding- assistances/accessories
14-15
15-16
17-20
20-21
22
22
22-23
24-25
Abrasive materials
Diamond surface grinding disc DIPLAS 26-27
Diamond surface and fine grinding discs 28
SiC- wet grinding papers :
Non self-adhesive
29-30
Self-adhesive/Foiled
30-31
Zircon corundum wet grinding papers
31
Adapter disc CT GeccoFix
31-32
Adapter disc GripFix
32
Adhesive foil Klebfix
33
Adhesive spray
33
Grinding stones
33
Fine grinding discs CT GRIFIN SOFT 9
34
Fine grinding discs CT GriFin 9
34
Polishing disc CT GriFin 3
35
Polishing disc CT GriFin 1
35
Polishing cloths
Polishing cloths description
Polishing cloths self-adhesive
Magnetic polishing cloths on steel disc
Polishing cloths on Ferrous-foil
Polishing cloths Ø 73 mm/98 mm
Disc-storage-box
Adapter disc MAGAS
MAGFOL – magnetic foil
39
40
40
41
42
42
Polishing materials
Diamond suspensions
Diamond pastes/-sticks
Diamond spray
Two-in-One-suspensions
Lubricants
Final polishing suspensions
Aluminum oxide suspensions
43-45
45
46
47-48
49
50
50
Mobile Materialography
Power Lock Disc and accessories
Mobile component microscope
Surface reprint mass - REPRINT
Reprint foils
Fixing assistances SFZ
Etching agents (bundle)
51-52
53
53-54
55
55
56
Cleanser/Etching agents
Solvents and cleaning agents
Cut cleaning
Etching agents
Colour etching agents/Electrolyte
Etching tongs/bowls
56
56
57
58
58
Accessories
Measuring bottles
Latex- and Nitrile gloves
Adhesive spray
Sealing lacquer
Target preparation
59
59
59
59
59
Microscopy/Camera/Pixelfox
Reflected light industry microscope
Microscope access./Fixing assistances
Wifi - Microscope Camera
Pixelfox
60
61
62
63
Microtomy/Thin s. preparation
36
37
38
Microtomy
Glass slides and accessories
Literature
Preparation examples
64-69
70
71
72
5
- Your contact for optimal
materialographic sample preparation!
A word about us:
After many years of experience in the field of laboratory management and material technology
we want to pass on our knowledge to you and offer you our services and products in the field
of Materialography. Please do not hesitate to contact us. We are happy to answer all
questions about materialgraphic sample preparation.
Our offer:
Damage Analysis
Training
Consumables for materialographic sample preparation
Development and manufacture of products and equipment for materialography
Support during the establishment of new labs
Hardware and software for digital image processing
In our lab we can become active for you in the field of Damage Analysis and Contract
Materialography.
Through our comprehensive on-site or in-house individual training you have the possibility to
expand and consolidate your knowledge in the field of materialographic sample preparation.
We can also provide optimal solutions for problems.
Peruse our Web-shop where our range of products is continuously updated. There you
will also find products that are not yet included in this price list.
Please feel free to contact us by phone 02432/8902510, by fax 02432/8902519 or by E-Mail:
[email protected]
All the information in this price list cannot be guaranteed, in-between sales of the products
reserved. We reserve the right to change prices and products at any time. All prices are
shown in EUROS, plus the appropriate rate of value-added tax.
6
Trainings
We have decided to intensify our training activities. The focus is on the optimization of the
infrastructure as well as the best possible location. Our business partners thankfully support this
concept, now we are proud to say that our trainings will take place in these locations:
T RAINING CENTER – WEGBERG
In 2014 we have celebrated our 10 year anniversary, coupled with 30
years of professional experience for the preparation. For seven years we
have been working in the area of sample preparation and the joint training
together with Micro Kern. Intensive we work on the techniques of thin
section preparation and microtomy for nonmetallic materials.
LETTE GUILD – BERLIN
DEPARTMENT METALLOGRAPHY AND MATERIAL -PHYSICAL ANALYSIS
The “Lette guild” will celebrate its 150th anniversary in the year 2016 as a
job training center. The department metallography has been training
nationally sought technical assistants from metallography for 110 years.
Tradition is combined with modern technology and current course content.
UNIVERSITY OF TECHNOLOGY – BERLIN
FIELD OF POLYMER ENGINEERING / POLYMER PHYSICS
Here we will be performing together with Micro Kern events around the
microtomy and microscopy. The students of “Lette guild” visit as part of an
excursion, the Institute for plastic-processing and testing.
We also offer In-house-training which has following benefits:
- No lack of staff
- No expenses for traveling
- Training with your equipment
- No extra costs after the amount of payment is set
- Direct advice and problem-solving on site
Your employees receive extensive training tools and a certificate about the participation. All of the
training content can be fitted to your individual needs. For Job experience on site we would require
information about present equipment, materials and knowledge about the co-workers etc.
For example we can offer you following trainings:
7
Own Trainings
MATERIAL SCIENCE TRAINING - THEORETICAL AND PRACTICAL
1. MATERIAL SCIENCE - MICROSTRUCTURE REPRESENTATION AND INTERPRETATION
Contents:
What is meant by the concept structure?
How is a structure formed?
The structure and its interpretation
Link between structure and material properties
The "true" structure - avoidance of preparation artifacts and misinterpretation
2. MATERIAL SCIENCE AND SAMPLE PREPARATION – FROM THE MATERIAL SAMPLE TO THE FINAL CUT
Contents:
Sample Extraction – Sawing, cutting and others
Sample fixation – warm or rather cold embedding
Grinding and polishing
Visualization of micro structure through Etching
Microscoping and the interpretation
MOBILE MATERIALOGRAPHY – PRACTICAL
1. MOBILE COMPONENT MATERIALOGRAPHY
Contents:
Individual process technologies of mobile cut production
Safety of the surface structure through foils or the replica technique
Visualization of micro structure
Documentation
If you show any interest towards the training please contact us. We would be pleased to show you an
individual offer or send a detailed catalog.
Trainings with our business partners
PREPARATION FOR THE TRAINING
1. S AMPLE PREPARATION AND EMBEDDING
(SEMINAR PEEB - EVERY H ALF YEAR , ONE DAY; PREPARATION COURSE FOR PNMW, PMW AND MPIP)
Contents:
Optimal Adjustment of the sample extraction and embedding with a main focus
work with non-Metal materials
2. MICROTOMY FOR THE PREPARATION OF INDUSTRIAL P RODUCTS
(SEMINAR MPIP – EVERY YEAR, TWO DAYS ; B ERLIN OR WEGBERG)
Contents:
Cutting and sectional reduction techniques, knife choice, target preparation
3. PREPARATION FOR METAL MATERIALS
(SEMINAR PMW – EVERY H ALF YEAR , TWO DAYS ; SPRING IN BERLIN, AUTUMN IN WEGBERG)
Contents:
Sample Extraction, Embedding, cut technique
Etching process
4. PREPARATION FOR NON -METAL MATERIALS
(SEMINAR PNMW – EVERY H ALF YEAR, TWO DAYS; SPRING IN BERLIN, AUTUMN
IN
WEGBERG )
Contents:
Sample Extraction, embedding
Cut- and thin section technique
5. MICROSCOPY AND DIGITAL IMAGE DOCUMENTATION (SEMINAR MDFD)
(SEMINAR MDFD – EVERY H ALF YEAR, ONE-DAY ; ADVANCED TRAINING COURSE TO PNMW, PMW AND
MPIP)
Contents:
Optical contrast methods
Microscopy and documentation of customer samples
We will send you detailed information on these and other trainings.
8
Perfection in materialographic sample preparation!
Our preparation laboratory develops the optimal sample preparation for your material testing, please send us
your samples with a brief description of your problem and we work out for free * a preparation concept.
* Free preparations without evaluation of the microstructure and other material properties.
Damage Analysis and Contract Materialography
1.
2.
3.
4.
Production of macro and micro cuts
Grain texture investigation and evaluation
Photographic documentation
Production of materialographic cut tests and development of the preparation steps with
recommendation of the consumption materials to be used.
5. Test preparation for the microscopic evaluation and documentation on a digital picture display
system.
If you would want to place an order for a Materialographic sample preparation for us, please just
contact us.
The price of the preparation depends on the costs incurred. If you require we can provide you a more
detailed quote.
Micro hardness test
Picture analysis: Grain size, layer thicknesses, particle count,
pore analysis
REM - Investigations with microprobe investigation
Mobile component examination
9
New Products
Wet cut-off grinding wheels:
Universal cutting disc suitable for most technical materials, e.g. Ni-based alloys
cutting disc Ø 250 x 1,5 x 32 mm and Ø 250 x 0,8 x 32 mm, page 11
Cold Embedding Materials:
CEM3000 TWINFIX: 2-component embedding material based on modified polyester resin which,
due to its special properties expands and no longer shrinks.
The cold embedding material is particularly well suited for hardness 83-87 Shore D and is
characterized by an excellent edge-connection, therefore it expands during curing process.
That effect is well known as of previous cold embedding material CEM3000+, page 18
CEM3020 Hardening fluid 1 liter bundle, page 19
Embedding accessories:
Paraffin for vacuum infiltration CTWax N, CTWax Plus and CT Wax Xtra, page 25
SiC - Wet grinding paper:
Not self-adhesive Ø 350: in different grain sizes, page 30
SiC-paper foiled: The SiC paper is laminated with a foil and perfectly suited for our
adapter disc GeccoFix, page 31
Adapter disc CT GeccoFix self-adhesive, page 32
Disc-storage-box:
For storage of new and used polishing wheels, SiC paper
and grinding wheels for Ø 200 mm und Ø 250 mm, page 40
Etching agent by Murakami, page 57
Etching agent by Klemm I and Klemm II stock solution, page 58
Wifi - Microscope Camera
5 MP Digital Camera for macro- and micro-image documentation, page 62
In addition, already inter alia since 2015 in program:
Wet cut-off grinding wheels:
Fabric-strengthened for surface-hardened steels, inductive and case hardening steels, for core
hardness more than 450 HV, cutting wheels Ø 250, Ø 300 and Ø 350 mm, page 10
Precision cutting wheels:
Corundum precision cutting discs for soft, medium-hard and hard iron materials and
SIC-precision cutting discs for non-ferrous-metals, Titan und plastics, Ø 150 und Ø 200, page 11
Cleaning agent Ultrasonic-Cleaner
Specially developed for cleaning of steel samples, page 56
Fixing assistances SFZ allow the planar clamping of acetate foils for an optimal viewing of
microstructures, page 55
The fixing assistance RSP allows the planar putty of materialographic samples, page 61
Literature:
Text book "Materialographische Präparationstechniken" by Heinz-Hubert Cloeren, page 71
Text book "Die Top 40 Fragen rund um die Mikroskopie" by Martin Kern, page 71
10
Wet cut-off grinding wheels with high cutting quality
Top quality, high durability, best price/performance ratio
Price €/item
Fabric-strengthened for materials 150 to 700 HV
Cut023
Cut037
Cut038
Cut039
Cutting disc
Cutting disc
Cutting disc
Cutting disc
Ø 254 x 1,7 x 32 mm
Ø 305 x 2,2 x 32 mm
Ø 356 x 3,0 x 32 mm
Ø 406 x 3,2 x 32 mm
Non-strengthened for materials of medium hardness 150 to 700 HV
Cut029
Cut030
Cut024
Cut032
Cutting disc
Cutting disc
Cutting disc
Cutting disc
Ø 254 x 1,6 x 32 mm
Ø 305 x 1,8 x 32 mm
Ø 350 x 2,5 x 32 mm
Ø 406 x 3,2 x 32 mm
10,40
13,30
18,10
24,20
10,40
13,30
18,10
24,20
High Quality Premium Cutting Wheels
Non-strengthened for materials of medium hardness 150 to 700 HV
Cut049
Cut050
Cut051
Cut052
Cutting disc
Cutting disc
Cutting disc
Cutting disc
Ø 250 x 1,5 x 32 mm
Ø 300 x 1,8 x 32 mm
Ø 350 x 2,5 x 32 mm
Ø 400 x 3,0 x 32 mm
12,20
15,90
21,00
On request
Non-strengthened for materials of high hardness 500 to 1000 HV
Cut033
Cut034
Cut025
Cut036
Cut061
Cutting disc
Cutting disc
Cutting disc
Cutting disc
Cutting disc
Ø 254 x 1,5 x 32 mm
Ø 305 x 1,8 x 32 mm
Ø 350 x 2,5 x 32 mm
Ø 406 x 3,2 x 32 mm
Ø 508 x 3,5 x 32 mm
10,40
13,30
18,10
24,20
45,60
High Quality Premium Cutting Wheels
Non-strengthened for materials of high hardness 500 to 1000 HV
Cut053
Cut054
Cut055
Cut056
Cutting disc
Cutting disc
Cutting disc
Cutting disc
Ø 250 x 1,5 x 32 mm
Ø 300 x 2,0 x 32 mm
Ø 350 x 2,5 x 32 mm
Ø 400 x 3,0 x 32 mm
12,20
15,90
21,00
On request
For Titan, non-ferrous metals and plastics
Cut057
Cut059
Cut042
Cut043
Cutting disc
Cutting disc
Cutting disc
Cutting disc
Ø 250 x 1,7 x 32 mm
Ø 300 x 2,0 x 32 mm
Ø 350 x 2,5 x 32 mm
Ø 400 x 3,0 x 32 mm
14,70
19,40
24,40
34,50
Fabric-strengthened for surface-hardened steels,
inductive and case hardening steels
For core hardness up to 450 HV
Cut058
Cutting disc Ø 250 x 1,7 x 32 mm
Cut062
Cut063
For core hardness more than 450 HV
Cut064
Cut065
Cut066
Other dimensions on request!
12,20
15,90
21,00
12,20
15,90
21,00
Quantity discount: 5% discount from 25 items, 10% discount from 50 items, 15% discount from 100 items.
Delivery time if not in stock: 8 to 12 weeks! Other dimensions and specifications on request!
Our Tyrolit-cutting discs are still available on request. If out of stock, delivery time approx. 10 to 12 weeks!
Please contact us for prices and delivery times.
11
Price €/PU
Universal cutting disc suitable for most technical
materials, e.g. Ni-based alloys
Cut067
Cut068
Cutting disc
Cutting disc
Ø 250 x 1,5 x 32 mm, pack of 5 pieces
Ø 250 x 0,8 x 32 mm, pack of 5 pieces
70,00
80,00
Quantity discount: 5% discount from 3 PU
Precision cutting wheels
New: Corundum-cutting discs, universally applicable pack of 5 pieces
High Quality Premium
Corundum precision cutting discs, universally applicable, inter alia for soft,
medium-hard and hard iron materials
PCut009
PCut010
Ø 150 x 0,5 x 12,7 mm for soft, medium-hard and hard iron materials
Ø 200 x 0,8 x 12,7 mm for soft, medium-hard and hard iron materials
Price €/PU
65,00
95,00
New: SiC-cutting discs pack of 5 pieces
High Quality Premium
SiC precision cutting discs for non-ferrous-metals, Titan und plastics
PCut011
PCut012
Ø 150 x 0,5 x 12,7 mm for non-ferrous-metals, Titan und plastics
65,00
95,00
Corundum- and SiC-precision cutting discs pack of 5 pieces
Price reduction due to replacement of the existing precision cutting discs
While stocks last
PCut003
PCut004
PCut005
PCut007
PCut008
Ø 150 x 0,5 x 12,7 mm for medium-hard iron materials hardness 35 – 60 HRC
Ø 200 x 0,8 x 12,7 mm for medium-hard iron materials hardness 35 – 60 HRC
Ø 150 x 0,5 x 12,7 mm for hard iron materials hardness > 60 HRC
Quantity discount: 5% discount from 3 PU
45,00
55,00
45,00
45,00
55,00
12
Diamond- and CBN- cutting wheels
1 = disc diameter
2 = bore diameter
3 = coating thickness
Price €/item
Diamond cutting discs, metal bound, for ceramics and minerals, 5 mm high coating
DiaCut001
DiaCut003
DiaCut005
DiaCut006
DiaCut008
DiaCut011
188,00
219,00
254,00
254,00
284,00
338,00
Ø 75 x 0,18 x 12,7 mm
Ø 100 x 0,35 x 12,7 mm
Ø 125 x 0,35 x 12,7 mm
Ø 125 x 0,40 x 12,7 mm
Ø 150 x 0,45 x 12,7 mm
Ø 200 x 0,60 x 22,0 mm
Price €/item
Diamond cutting discs, metal bound, for hard metals, concrete and minerals
DiaCut002
DiaCut004
DiaCut007
DiaCut009
DiaCut010
DiaCut012
DiaCut028
DiaCut013
DiaCut015
DiaCut017
DiaCut019
DiaCut021
Ø 75 x 0,20 x 12,7 mm coating height 5,0 mm
Ø 125 x 0.50 x 12,7 mm coating height 5,0 mm
188,00
219,00
266,00
284,00
320,00
338,00
382,00
472,00
532,00
705,00
945,00
1.205,00
Diamond cutting discs Bakelite bound for ceramic, hard metals, hard minerals and
glass
DiaCut027
DiaCut026
DiaCut025
DiaCut014
DiaCut016
DiaCut018
DiaCut020
Ø 125 x 0,60 x 12,7 mm coating height
5,0 mm
5,0 mm
5,0 mm
5,0 mm
9,0 mm
9,0 mm
8,0 mm
284,00
320,00
378,00
472,00
603,00
763,00
1.076,00
Diamond cutting discs with coarse diamond grain, nickel bound
Application such as embedded samples in plastic
DiaCut023
DiaCut022
DiaCut024
Ø 125 x 1,5 x 12,7 mm (Thickness of steel blank 0.5 mm)
Ø 150 x 1,5 x 12,7 mm (Thickness of steel blank 0,8 mm)
Ø 200 x 1,8 x 12,7 mm (Thickness of steel blank 1,2 mm)
378,00
443,00
573,00
CBN-cutting discs Bakelite bound for hard and ductile steels
CBNCut001
CBNCut002
CBNCut003
CBNCut004
CBNCut005
CBNCut006
CBNCut007
5,0 mm
5,0 mm
7,0 mm
9,0 mm
9,0 mm
9,0 mm
9,0 mm
355,00
378,00
445,00
764,00
886,00
On request
On request
13
If you are unsure about the choice of the diamond cutting disc, please tell us the application,
so that we can offer for you the more suitable diamond cutting disc.
Special sizes and Dry-diamond cutting discs on request!
Delivery time: if not in stock, approx 4-6 weeks
Corundum sharpening stone
AZS001 Sharpening stone for free-cutting of diamond grinding discs
(DIPLAS, CT DIAGRIT, or other) and diamond cutting discs
7,90
Corrosion protection coolant – CUTLUB and accessories
Newly developed special heat- and corrosion protection agent for all types of cutting machines
Mixing ratio: 1: 30
CUTLUB is a water-soluble, mineral oil-free cutting fluid of the amine- and boric acid-free generation. This offers
high technical capacity and the best possible industrial safety and protection for your staff.
CUTLUB is a special product for the separation of hard metal materials, steel- and cast qualities, coloured metals
and non-ferrous materials.
CUTLUB prevents the absorption of cobalt ions in grinding and/or decollating solutions and with that also their
burning. The protection of the workers is improved significantly.
CUTLUB - Corrosion protection coolant mineral oil-free
CUTLUB001
CUTLUB002
CUTLUB003
1 kg – bundle
5 kg – bundle
10 kg – bundle
Price €
24,40
108,00
207,00
CUTLUB - Corrosion protection coolant mineral oil-based on request!
CUTClean – will be used when using CUTLUB before the coolant-change as a system-cleaner or even during
the editing-process as a fungicide.
- Excellent flushing effect
- Bactericidal and fungicidal effect
- Good corrosion protection
- Easy application
- Improved occupational hygiene
- Cleaning even in inaccessible places
CUTClean is added for exchange provided solution depending on degree of contamination of 0.5 to 1.5%.
CUTCl001
ES001
ES002
CUTClean System-cleaner 1 kg
Defoamer Mineral-oil-free, with anti-foaming properties 1 kg
Defoamer Mineral-oil-free, with anti-foaming properties 0,5 kg
22,60
36,00
20,60
14
Warm Embedding Materials
Embedding-parameter of Warm Embedding Materials
Ø
25 mm
Ø
30 mm
Embedding Material
Product
40 mm
Cooling
Quantity
Time
Temp.
Strength
Time
1
[ml]
[min]
[°C]
[kN]
[min]
[Scoop]
Speed
WEM EPOXY
1
15
3-5
150 - 180
15
2-3
Fast
WEM KLAR
1
15
3 1/2 - 5
150 - 180
15
6-8
Slow
WEM UNI
1
15
3 1/2 - 5
150 - 180
15
6-8
Slow
WEM REM
1
15
4-5
150 - 180
15
2-3
Fast
WEM PHENOL
1 1/2
23
3 1/2 - 5
150 - 180
15
2-3
Fast
WEM BIO PLUS
1
15
4-5
120 - 170
15
2-5
Fast
WEM BIO FILL
1 1/2
23
4-5
170 - 190
15
2-5
Fast
WEM FAST Orange
1
15
3-5
180 - 190
15
2-3
Fast
WEM FAST Blue
1
15
3-5
180 - 190
15
2-3
Fast
Embedding Material
Product
Heating
Cooling
Quantity
Time
Temp.
Strength
Time
1
[ml]
[min]
[°C]
[kN]
[min]
[Scoop]
Ø
Heating
Speed
WEM EPOXY
1 1/2
23
4-6
150 - 180
20
2-3
Fast
WEM KLAR
1 1/2
23
4-6
150 - 180
20
6-8
Slow
WEM UNI
1 1/2
23
4-6
150 - 180
20
6-8
Slow
WEM REM
1 1/2
23
4-6
150 - 180
20
2-3
Fast
WEM PHENOL
2
30
4-6
150 - 180
20
2-3
Fast
WEM BIO PLUS
1 1/2
23
4-5
120 - 170
20
3-5
Fast
WEM BIO FILL
2
30
5-7
170 - 190
20
3-5
Fast
WEM FAST Orange
1 1/2
23
4-6
180 - 190
20
2-3
Fast
WEM FAST Blue
1 1/2
23
4-6
180 - 190
20
2-3
Fast
Embedding Material
Product
Heating
Quantity
Time
1
[Scoop]
Cooling
Temp.
Strength
Time
Speed
[ml]
[min]
[°C]
[kN]
[min]
WEM EPOXY
3
45
5-7
150 - 180
30
2-4
Fast
WEM KLAR
2
30
4 1/2 - 7
150 - 180
30
7 - 10
Slow
WEM UNI
3
45
4 1/2 - 7
150 - 180
30
7 - 10
Slow
WEM REM
2 1/2
38
5 1/2 - 7
150 - 180
30
2-4
Fast
WEM PHENOL
3
45
5-7
150 - 180
30
2-4
Fast
WEM BIO PLUS
2 1/2
38
4-5
120 - 170
30
3-5
Fast
WEM BIO FILL
3
45
5-7
170 - 190
30
3-5
Fast
WEM FAST Orange
3
45
5-7
180 - 190
30
2-4
Fast
WEM FAST Blue
3
45
5-7
180 - 190
30
2-4
Fast
15
Ø
Embedding Material
Product
50 mm
Heating
Cooling
Quantity
Time
Temp.
Strength
Time
1
[ml]
[min]
[°C]
[kN]
[min]
[Scoop]
Speed
WEM EPOXY
5
75
6-8
150 - 180
50
2-4
Fast
WEM KLAR
3
45
6-8
150 - 180
50
9 - 12
Slow
WEM UNI
4
60
6-8
150 - 180
50
9 - 12
Slow
WEM REM
4
60
6-8
150 - 180
50
2-4
Fast
WEM PHENOL
5
75
7-9
150 - 180
50
2-4
Fast
WEM BIO PLUS
4
60
6-8
120 - 170
50
3-6
Fast
WEM BIO FILL
5
75
7-9
170 - 190
50
3-6
Fast
WEM FAST Orange
5
75
6-8
180 - 190
50
2-4
Fast
WEM FAST Blue
5
75
6-8
180 - 190
50
2-4
Fast
1) à 15 ml
WEM EPOXY
Warm embedding material on epoxy resin basis; black with mineral filling materials.
Good adhesiveness at the test surface, optimal edge clearance, when warm embedding it becomes watery, so
that it also partly enters into the porous sample surface.
Chemical resistant
Price €
WEM001
WEM EPOXY
1,0 kg bundle
36,00
WEM002
WEM EPOXY
7,5 kg bundle
240,00
WEM021
WEM EPOXY
22,5 kg bundle (3 x 7.5 kg - in the bucket)
595,00
WEM UNI (white/grey)
Universal inorganically filled glass fibre reinforced warm embedding material.
Good adhesiveness at the test surface, optimal edge clearance, when warm embedding it becomes watery, so
that it also partly enters into the porous sample surface.
Chemical resistant
WEM008
WEM009
WEM023
1,0 kg bundle
7,5 kg bundle
36,00
235,00
621,00
WEM Clear
Thermoplastic transparent warm embedding material
Optimal transparency, good adhesiveness to the sample surface
Chemical resistant
WEM012
WEM013
WEM014
WEM Clear
WEM Clear
WEM Clear
1,0 kg bundle
7,5 kg bundle
36,00
235,00
621,00
WEM REM
Warm embedding material with excellent electrical conductive properties, therefore very suitable for
investigations in REM; voltage loss almost completely eliminated
Filling material: Graphite
WEM010
WEM REM
1,0 kg bundle
44,00
WEM011
WEM REM
7,5 kg bundle
313,00
WEM024
WEM REM
818,00
16
WEM Phenol
Warm embedding material on phenol resin basis, black with wood-flour as filling material
WEM005
WEM006
WEM019
WEM020
WEM Phenol
WEM Phenol
WEM Phenol
WEM Phenol
2,5 kg bundle
7,5 kg bundle
22,5 kg bundle (3 x 7,5 kg - in the bucket)
37,5 kg bundle (5 x 7,5 kg - in the bucket)
Price €/PU
24,50
55,50
149,00
237,00
WEM BIO PLUS
Warm embedding material from natural fiber-reinforced compound based on PLA
– biodegradable
WEM025
WEM026
WEM027
WEM028
WEM BIO PLUS
WEM BIO PLUS
WEM BIO PLUS
WEM BIO PLUS
2,5 kg bundle
7,5 kg bundle
22,5 kg bundle (3 x 7,5 kg in the bucket)
37,5 kg bundle (5 x 7,5 kg in the bucket
27,00
67,00
170,00
256,00
WEM BIO FILL
Filler for warm embedding from natural fiber-reinforced compound based on polypropylene
WEM029
WEM030
WEM031
WEM032
WEM BIO FILL
WEM BIO FILL
WEM BIO FILL
WEM BIO FILL
2,5 kg bundle
7,5 kg bundle
21,50
52,50
135,00
203,00
WEM FAST Orange
WEM FAST Orange is a thermosetting with inorganic and organic fillers filled melamine resin
for warm embedding of materialographic samples.
WEM FAST Orange produces a very good contrast at materialography samples with
a light or dark surface coating such as in color layers, nickel or nitride layers.
WEM036
WEM037
WEM038
WEM FAST Orange
WEM FAST Orange
WEM FAST Orange
1,0 kg bundle
7,5 kg bundle
21,50
146,00
394,00
WEM FAST Blue
WEM FAST Blue is a thermosetting with inorganic and organic fillers filled melamine resin
for warm embedding of materialographic samples.
WEM FAST Blue has the same properties as WEM FAST Orange.
– color blue
WEM040
WEM041
WEM042
WEM FAST Blue
WEM FAST Blue
WEM FAST Blue
1,0 kg bundle
7,5 kg bundle
Preforms upon request, Mould release agent TrenM see page 24!
21,50
146,00
394,00
17
Cold Embedding Materials
Price €
CEM001
CEM1000 Blue Set
2-component embedding materials based on high cross-linked
Methylmethacrylate.
Set consisting of 1000 g powder, 500 ml hardening fluid,
25 mixing pots and 50 wooden spatulas.
Universal cold embedding material with mineral filling material
Mixture ratio: 2 parts volume powder, 1 part volume hardening fluid
Processing time: 3 - 5 minutes
Hardening-time at room temperature: 12 - 15 minutes
Polymerization temperature: 92-98°C
71,50
CEM056
CEM1000 Blue Set, Methylmethacrylate-free
2-component embedding materials, hardening fluid Methylmethacrylate-free
Improved version, no dangerous goods, less air bubble inclusions,
neutral smell
25 mixing pots and 50 wooden spatulas.
Universal cold embedding material with mineral filling material
78,00
CEM002
CEM1000 Blue powder 1000 g
Powder for 2-component embedding material CEM 1000 blue
47,00
CEM003
CEM1000 Blue Hardening fluid 500 ml
Hardening fluid for 2-component embedding material CEM 1000 blue,
based on high cross-linked Methylmethacrylate.
22,00
CEM055
CEM1000 Blue Hardening fluid 500 ml
Hardening fluid for 2-component emb. material, Methylmethacrylate-free
Improved version:
No dangerous goods, less air bubble inclusions, neutral smell
28,80
CEM033
CEM1000 Blue Jumbo pack
2-component embedding material based on high cross-linked
Methylmethacrylate.
Jumbo pack consisting of 3000 g powder and 1500 ml hardening fluid
191,00
CEM057
CEM1000 Blue Jumbo pack– Hardening fluid, Methylmethacrylate-free
2-component embedding material, hardening fluid, Methylmethacrylate-free
Improved version:
No dangerous goods, less air bubble inclusions, neutral smell
Jumbo pack consisting of 3000 g powder and 1500 ml hardening fluid
209,00
CEM034
CEM1000 Blue powder 5 kg
217,50
CEM051
CEM1000 Blue powder 10 kg
401,50
Quantity discount for hardening fluid: 5% discount for orders from 5 items
10% discount for orders from 10 items
18
Price €
New version:
CEM058
CEM3000 TWINFIX Set
2-component embedding material based on modified polyester resin which,
due to its special properties expands and no longer shrinks.
Hardening fluid: keep cool and dark (not above 20°C)!
Minimum durability: 3 months
With the previous CEM3000 + powder incompatible
Set consisting of 750 g Powder, 500 ml hardening fluid,
25 mixing pots and 50 mixing spatulas.
Mixture ratio: 1 parts volume Powder, 1 parts volume hardening fluid
Mixture ratio: weight 3:2
Processing time: 5 minutes
Hardness: 83-87 Shore D
Polymerization temperature: 110°C for 40mm-moulds
79,00
CEM059
CEM3000 TWINFIX powder 750 g
Powder for 2-component embedding material CEM3000 TWINFIX
42,00
CEM060
CEM3000 TWINFIX Hardening fluid 500 ml
Hardening fluid for 2-component embedding material CEM3000 TWINFIX
For 3 months durable, keep cool (not above 20 ° C)!
34,50
CEM061
CEM3000 TWINFIX powder 1,5 kg
79,00
CEM062
CEM3000 TWINFIX powder 5 kg
220,00
CEM063
CEM3000 TWINFIX powder 10 kg
360,00
CEM021
CEM2000 TRIFIX Set
3-component embedding material based on modified polyester in the form
of Powder, Syrup I and Syrup II. CEM2000 TRIFIX properties display very
low shrinking and excellent edge connection. Colour whitish opaque.
Set consisting of 1500 g Powder, 1000 ml Syrup I, 500 ml Syrup II,
25 mixing pots and 50 mixing spatulas.
Universal cold embedding agent with mineral filling material.
Mixture ratio: 3 parts volume Powder, 2 parts volume Syrup I,
1 part volume Syrup II.
Mix the Syrup I and II first, then add the powder
155,00
CEM042
CEM2000 TRIFIX Powder, 1500 g, Powder for 3-Komp. CEM2000 TRIFIX
73,50
CEM043
CEM2000 TRIFIX Syrup I, 1000 ml, Syrup for 3-Komp. CEM2000 TRIFIX
58,00
CEM044
CEM2000 TRIFIX Syrup II, 500 ml, Syrup for 3-Komp. CEM2000 TRIFIX
34,00
19
Price €
77,00
CEM029
CEM3020 Set
A clear – transparent 2-component - cold embedding material with very
good adhesion and new environmentally friendly hardening system.
During the curing under pressure (for example in the pressure pot) you
get crystal-clear embeddings.
25 mixing pots and 50 wooden spatulas
Polymerization temperature: 85 - 89°C
CEM030
CEM3020 Powder 1000 g
Powder for clear – transparent 2-component embedding material
51,50
CEM031
CEM3020 Hardening fluid 500 ml
Hardening fluid for clear – transparent 2-component embedding material
24,00
CEM031
CEM3020 Hardening fluid 1 liter
Hardening fluid for clear – transparent 2-component embedding material
47,50
CEM039
CEM3020 Powder 5 kg
201,00
CEM036
CEM3020 Powder 10 kg
339,50
Quantity discount for the hardening fluid 500 ml: 5% from 5 items, 10% from 10 items
Quantity discount for the hardening fluid 1 liter ml: 5% from 5 items, 10% from 10 items
Zub015
Pressure pot 4 l
To blow- and pore-free curing of CEM3020,
Compressed-air connection(2 bar) or compressor required
Dimensions: Ø 195 mm, height: 185 mm, including 2 m filling hose
201,00
CEM048
CEM3070 electrically conducting Set
An electrically conducting 2 - Components - cold embedding material
Very well suitable for raster-electron investigations.
Excellent adhesion and very good electrical conductivity by mixed
nanoparticles of graphite.
25 mixing pots and 50 wooden spatulas
Polymerization temperature: 85 - 89°C
149,50
CEM049
CEM3070 electrically conducting Powder 1000 g
103,00
CEM050
CEM3070 electrically conducting Hardening fluid 500 ml
44,00
20
Price €
85,50
CEM008
CEM4000 Lightfix
Light hardened one-component embedding material of highest
translucency based on Methacrylate, 1 l
CEM4000 Lightfix hardens with blue light (wavelength 400 nm to 500 nm).
With our product, layer thicknesses of 20 mm can be hardened without
difficulty in one step.
After the polymerisation built-up inhibition layers on the surface can be
wiped away very simply with a cloth soaked in alcohol.
Thereafter, a crystal-clear test sample is formed.
One does not need any additional masking lacquer!
Gap width: max. 20 µm
Linear shrinkage: max. 0,25 %
Hardness: at least 80 Shore - D, is already achieved after a single exposure
time of 9 minutes.
CEM041
CEM4001 Lightfix fixing paste
Light hardened one-component fixing-paste of highest
translucency based on Methacrylate, 5 g syringe
21,50
CEM013
CEM9000 very thin fluid (very good qualified for mass of embeddings)
CEM 9000 is a high quality, nearly odorless
2-component Polyurethane casting compound without filling material.
Properties:
 very thin fluid
 good through hardening
 very high hardness
 good heat resistance
 excellent chemical resistance
 very low curing temperature
 ideal for materialographic sample preparation
Color of resin: component A white
(1kg)
Color Hardener: component B light yellow (1kg)
Mixture ratio: 1: 1, Pot time: 3 - 5 minutes
Hardening temperature: 18 - 25 ° C
Hardness: 70 - 75 Shore D, viscosity of the mixture: 40 – 60 mPas
Linear shrinkage: 0,15 – 0,20 %
Larger bundle on request!
38,50
Epoxy resins
Epoxy 1000
Technical details of Epoxy 1000:
Colour: crystal-clear
Mixture ratio: 100 : 19-20
Hardening time: 6 - 8 hrs
Heat strength: approx. 85°C
Epoxy001
Epoxy002
Epoxy003
Epoxy004
Epoxy005
Viscosity: Mixture 600 - 700 (mPas)
Refractive index: Resin 1,543
Hardener: 1,520
Storage: closed at 15°C
12 months
Hardness: 70 – 80 Shore D at 20°C
Epoxy 1000 Plus
Epoxy resin, low splitting & shrinkage, thin fluid and free of filling material
Set consisting of 1000g resin, 200 g hardener, 25 mixing pots and
50 mixing spatulas
Epoxy 1000 Resin
Resin 1000 g for epoxy resin system Epoxy 1000 Plus
Epoxy 1000 Hardener
Hardener 200 g for epoxy resin system Epoxy 1000 Plus
Epoxy 1000 Resin
Epoxy 1000 Hardener
58,00
35,80
19,80
161,00
86,00
21
Epoxy 2000
Technical details of Epoxy 2000:
Colour: yellowish transparent
Mixture ratio: 100 : 48
Hardening time: 14 - 16 hrs
Epoxy006
Epoxy007
Epoxy008
Epoxy009
Epoxy010
Viscosity: Resin 400 (mPas)
Hardener: 200 (mPas)
mixed 201 +- 50 (mPas)
Hardener: 1,520
Storage: closed at 15°C 12 months
Epoxy 2000 Set
Epoxy resin, high translucence, low splitting & shrinkage, thin fluid, free
of solvents and filling material. Set consisting of 1000 g resin,
480 g hardener, 25 mixing pots and 50 mixing spatulas
Epoxy 2000 Resin
Epoxy 2000 Hardener
Hardener 480g for epoxy resin system Epoxy 2000 Plus
Epoxy 2000 Resin
Epoxy 2000 Hardener
Price €
89,00
44,00
43,00
207,00
200,50
EPO-RESIN
Technical details of EPO-RESIN:
Colour: almost crystal-clear
Mixture ratio: 100 : 13
Epoxy018
Epoxy019
Epoxy020
Hardening time: 8-12 hrs
Storage: closed at 15°C: 12 months
EPO-RESIN
Epoxy resin, transparent, low splitting & shrinkage, thin fluid
very low viscosity
Resin 1 kg
EPO-HARDENER
Hardener 250 g for Epoxy resin EPO-RESIN
EPO-RESIN
Resin 5 kg
47,50
30,50
224,00
Epoxy 3000 Quick
Technical details of Epoxy 3000 Quick:
Colour: yellowish transparent
Mixture ratio 2 : 1 parts by weight
1,7 : 1 parts by volume
Pot life (+ 20 ° C): 100 minutes
Hardening time at 80 °C: 30 minutes
suitable for vacuum infiltration
Viscosity: Mixture 600-700 (mPas)
Hardener: 1,521
Storage: closed at 15°C
12 months
Hardness: 70 – 80 Shore D at 20°C
Epoxy015
Epoxy 3000 Quick 1 kg Set (Tin-Set)
Epoxy resin with low viscosity, transparent, low shrinkage,
Hardening time at 80 °C: 30 minutes, suitable for vacuum infiltration
Set consisting of 667 g resin in a tin, 333 g hardener in a tin, 25 mixing pots
and 50 mixing spatulas
67,00
Epoxy030
Epoxy 3000 Quick 1,5 kg Set (Glass bottle-Set)
Epoxy resin with low viscosity, transparent, low shrinkage,
Hardening time at 80 °C: 30 minutes, suitable for vacuum infiltration
Set consisting of 1 kg resin in a glass bottle, 500 g hardener in a glass bottle
25 mixing pots and 50 mixing spatulas
102,50
Epoxy031
Epoxy 3000 Quick Resin 1 kg (glass bottle) for Epoxy 3000 Quick
67,00
Epoxy032
Epoxy 3000 Quick Hardener 500 g (glass bottle) for Epoxy 3000 Quick
34,00
22
Dyeing agent for epoxy resins
Epocloer – Dyeing agent for epoxy resins
Epoxy - Coloured paste red, blue, yellow, green and black in 50 g tin
Pigment paste to the permanent dyeing of epoxy resins
Higher pigment content, easily mixable, light strong, softening agent free, cadmium & lead free.
During dark field viewing optimal reproduction of the colour pigments, allowing the viewing of cracks and pores.
Mixing ratio of 1 - 10 %
The colour pastes contain an epoxy resin as binding agent; therefore the addition takes place to be dyed resin
component.
Price €
Epocloer001 Epocloer Red
Epoxyd - Colour paste red
50 g tin
10,10
Epocloer002 Epocloer Blue
Epoxyd - Colour paste blue
50 g tin
10,10
Epocloer003 Epocloer Yellow
Epoxyd - Colour paste yellow 50 g tin
10,10
Epocloer004 Epocloer Green
Epoxyd - Colour paste green 50 g tin
10,10
Epocloer005 Epocloer Black
Epoxyd - Colour paste black
50 g tin
10,10
Pigmented Epoxy Resin
Epocloer 011
Epocloer 012
Epocloer 013
Epocloer 006
Epofluor 001
Epofluor 002
Epocloer 3000 Plus
Epoxy resin, low splitting & shrinkage
thin fluid, free of solvents and directly mixed
with a filling material.
Visualization of the embedding agent in the
macro- and microscopy (bright field, dark
field, polarization and fluorescence)
Set consisting of 1000 g resin,200 g hardener
25 mixing pots und 50 mixing spatulas.
Epocloer 3000 Plus Resin 1000 g
Epocloer 3000 Plus Hardener 200 g
64,50
Epocloer 4000 Pigment powder
Pigment powder 50 g, for mixing into epoxy resins.
Visualization of pores, cracks & other defects.
Dosage: mix approx. 1 g to 2 g into approx.100 g resin
EpoFluor Yellow Pigment powder
Fluorescent colour pigment powder for mixing into
epoxy resin, yellow, 50 g tin
EpoFluor Blue Pigment powder
Fluorescent colour pigment powder for mixing into
epoxy resin, blue, 50 g tin
22,60
42,00
19,90
22,60
22,60
Embedding Moulds and accessories for cold Embedding
Embedding moulds, blue made of POM (polyoxymethylene), reusable (metric)
KEF016
KEF017
KEF018
KEF019
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Ø 25 mm, blue
Ø 30 mm, blue
Ø 40 mm, blue
Ø 50 mm, blue
3 pieces
3 pieces
3 pieces
3 pieces
Price €/PU
7,40
7,90
8,50
9,00
23
Embedding moulds, transparent made of PP (polypropylene), reusable (metric),
for light-curing embedding moulds
KEF020
KEF021
KEF022
KEF023
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Ø 25 mm, transparent
3 pieces
3 pieces
3 pieces
3 pieces
Price €/PU
7,40
7,90
8,50
9,00
Quantity discount per item: in quantities from 5 PU: 3%, from 10 PU: 5% and from 20 PU: 10%
Embedding moulds made of silicone rubber
Embedding moulds made of silicone rubber, reusable, colour light blue
KEF004
KEF005
KEF006
KEF007
KEF008
KEF051
KEF052
KEF053
KEF009
KEF010
KEF011
Embedding mould Ø 25 mm, height 25 mm 1 piece
Embedding mould Ø 100 mm,height 35 mm 1 piece
Embedding mould □ 55 x 30 x 25 mm
1 piece
1 piece
1 piece
8,90
9,40
10,50
16,00
18,50
23,00
30,00
39,00
16,00
19,50
33,50
Embedding moulds made of silicone rubber, reusable, colour transparent, hardness 43 Shore A
High resistance to casting resins, particularly epoxy resins
KEF037
KEF029
KEF050
KEF024
KEF038
KEF039
KEF054
KEF055
KEF056
KEF040
KEF041
KEF042
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Embedding mould
Ø 25 mm, height 25 mm 1 piece
□ 55 x 30 x 25 mm
1 piece
□ 70 x 40 x 25 mm
1 piece
□ 100 x 50 x 25 mm
1 piece
9,90
10,30
11,50
11,50
17,50
20,50
25,70
33,00
44,50
17,50
21,50
36,50
Silicone rubber – Embedding moulds with magnetic core for better fixation of
magnetic materials!
KEF043
KEF044
KEF030
KEF045
KEF046
KEF047
1 piece
KEF048
1 piece
KEF049
1 piece
26,50
26,50
27,50
32,90
36,00
32,90
37,00
47,50
KEF026
43,50
“System Cover ", with magnetic core (form consists of two parts)
Quantity discount per item: in quantities from 5 PU: 3%, from 10 PU: 5% and from 20 PU: 10%
(No discount on embedding moulds with magnetic core)
24
Embedding assistances for warm and cold embedding
Price €/PU
New version: simplified the application!
MonoClip006
MonoClip007
MonoClip008
MonoClip009
MonoClip010
MonoClip011
MonoClip012
MonoClip
MonoClip
MonoClip
MonoClip
MonoClip
MonoClip
MonoClip
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
black
red
green
yellow
blue
mixed colors
transparent
100 pieces
100 pieces
100 pieces
100 pieces
100 pieces
100 pieces
100 pieces
30,80
30,80
30,80
30,80
30,80
30,80
30,80
New version: up to 6 samples can be embedded with one embedding assistance!
SixClip001
SixClip
Plastic
blue
50 pieces
SixClip002
SixClip
Plastic
transparent
50 pieces
30,80
30,80
New version: fits into Ø 30 mm diameter embedding form!
SampSix001 PolyClip
Plastic, purple 5 partitions, 1 mm distance
SampSix002 PolyClip
Plastic, grey
4 partitions, 2 mm distance
SampSix003 PolyClip
Plastic, white
3 partitions, 3 mm distance
100 pieces
100 pieces
100 pieces
28,60
28,60
28,60
New version, transparent: fits into Ø 30 mm diameter embedding form!
SampSix004 PolyClip
Plastic, transparent , 5 partitions, 1 mm distance 100 pieces
SampSix005 PolyClip
Plastic, transparent, 4 partitions, 2 mm distance 100 pieces
SampSix006 PolyClip
Plastic, transparent , 3 partitions, 3 mm distance 100 pieces
28,60
28,60
28,60
ClipBox001
37,00
Range with all variations of embedding aids with practical transparent box
Contains: 120 different embedding assistances
Zub002
Mixing pot 0,2 l 10 pieces
Mixing pot 0.2 l, thin-walled card,
white, one-sided PE coated (inside), 10 pieces
1,90
Zub001
Mixing spatula, made of wood, 10 x 114 mm 50 pieces
Mixing spatula made of wood, 10 x 114 mm 50 pieces
1,90
TrenM001
TrenM 400 ml (silicone free!)
Mould release agent for press- and embedding moulds
Zub020
Measuring spoon 17 ml, 158 mm, transparent 5 pieces
15,50
2,60
25
Paraffin for vacuum infiltration
Application:
With this method, pores, fissures, cracks and similar openings are sealed so any moisture remains trapped after
preparation (eg after cleaning or after etching) and does not pollute the environment.
For this purpose, paraffin (such as paraffin) can be melted in a laboratory vessel with the addition of fluorescent
dyes; these make the pores and gaps visible afterwards. When immersed in the paraffin, the sample should be
warmed slightly already.
For very fine porous material a short vacuum infiltration has proven favorable as well. Here, the laboratory vessel
is placed in a pressure pot with the paraffin and the sample. Then you can let the paraffin flow in the pores and
cracks, with pressure.
After sufficient paraffin is pulled into the surface, the remainder of the prepared ground surface is to be wiped
with a clean soft cloth. Alternatively, it is to be lifted off the surface, after it has hardened.
The sample can be final polished with oxide polishing suspensions easily.
In this case, the paraffin won’t be removed.
Price €/PU
Wax001
CTWax N 1kg
To infiltrate paraffin of porous materials or to close existing gaps
Melting temperature 61 ° C
14,50
Wax002
CTWax Plus 1 kg
High-purity paraffin consisting of polymers with regulated molecular weight
Very suitable for large and difficult to be infiltrated samples
Melting temperature 56 ° C
21,50
Wax003
CTWax XPlus 1 kg
High-purity paraffin consisting of polymers with lower molecular weight
Very suitable for large and difficult to be infiltrated samples
Melting temperature 50 - 54°C
29,50
26
Diamond plane- and fine grinding discs
DIPLAS Ni is a newly developed diamond plane grinding disc with diamonds bound in nickel.
DIPLAS Re is a newly developed diamond plane grinding disc with diamonds bound in resin.
Diplas Ni & Diplas Re replaces SiC – paper in many fields of plane and fine sanding.
Areas of application are: all short span forming materials, e.g. steel, cast alloys, ceramics, hard metals,
glass and mineralogical materials.
During the grinding of austenitic steels, titanium alloys and Ni based alloys the wheel-wear can be higher.
The advantage as opposed to other plane grinding discs available on the market is that with DIPLAS
a 4-5 times higher surface removal rate can be achieved.
The disc also allows small test diameters as no great spaces exist on the disc.
DIPLAS achieves optimal edge sharpness in very short time.
No changing of sandpaper is necessary.
DIPLAS is characterized by a very high endurance opposite traditional plane grinding discs.
DIPLAS with optimal price/performance ratio
DIPLAS Ni gives it in the sizes ø 200, 250 and 300 mm and in the grain sizes 120, 200, 400, 600 and 1000.
DIPLAS Re to grain size 3000 D1
DIPLAS was developed for the manual and automatic sample preparation.
DIPLAS is available with rear tie coat, so that it is usable with adapter discs on existing magnetic systems
or on steel disc (see new order numbers)
Price €/item
DIPLAS001 DIPLAS Ni grain size 120
D126
D 76
D 40
D 25
D 10
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
178,00
130,00
130,00
130,00
130,00
D126
D 76
D 40
D 25
D 10
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
228,00
195,00
195,00
195,00
195,00
D126
D 76
D 40
D 25
D 10
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
325,00
288,00
288,00
288,00
288,00
DIPLAS016 DIPLAS Re grain size 60
D251
D126
D 76
D 40
D 25
D 10
D 1
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
162,00
162,00
126,00
126,00
126,00
126,00
126,00
D251
D126
D 76
D 40
D 25
D 10
D 1
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
210,00
210,00
187,00
187,00
187,00
187,00
187,00
D251
D126
D 76
D 40
D 25
D 10
D 1
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
313,00
313,00
271,00
271,00
271,00
271,00
271,00
Other diameters and grain sizes on request!
Delivery time: if not in stock: 4 - 5 weeks.
Quantity discount per item: in quantities from 2 items: 5%
27
DIPLAS on steel disc for all magnetic holding systems!
Price €/item
DIPLAS040 DIPLAS Ni S grain size 120
D126
D 76
D 40
D 25
D 10
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
180,00
133,00
133,00
133,00
133,00
D126
D 76
D 40
D 25
D 10
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
231,00
198,00
198,00
198,00
198,00
D126
D 76
D 40
D 25
D 10
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
329,00
292,00
292,00
292,00
292,00
DIPLAS055 DIPLAS Re S grain size
60
DIPLAS056 DIPLAS Re S grain size 120
D251
D126
D 76
D 40
D 25
D 10
D 1
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
ø 200 mm
164,00
164,00
128,00
128,00
128,00
128,00
128,00
60
120
200
400
600
1000
3000
D251
D126
D 76
D 40
D 25
D 10
D 1
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 250 mm
213,00
213,00
190,00
190,00
190,00
190,00
190,00
60
120
200
400
600
1000
3000
D251
D126
D 76
D 40
D 25
D 10
D 1
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
ø 300 mm
317,00
317,00
276,00
276,00
276,00
276,00
276,00
Other diameters and grain sizes on request!
Delivery time: if not in stock: 4 - 5 weeks.
Quantity discount per item: in quantities from 2 items: 5%
28
CT DiaGrit – Diamond plane- and fine grinding discs
CT DiaGrit is a diamond plane- and fine grinding disc with a very good stock removal, rate and achieves
excellent edge sharpness and high durability.
CT DiaGrit replaces in many preparations, the rough- and fine grinding with SiC paper.
They are available in grain sizes 80, 120, 220, 600 and 1200. It is very easy to see which CT DiaGrit-disc is
being used by the brilliant colour-coding.
All CT DiaGrits are corrosion resistant and adaptable to a MD-disc.
CT DiaGrits are suitable for materials with hardness from 150 to 2000 HV.
CT DiaGrit Plus - Diamond plane- and fine grinding disc featuring twice the level of
diamond concentration! As a result, the lifetime increases significantly (approx. by
80%)!
Price €/item
PIATTO001 CT DiaGrit 80 grain size 80
colour red
colour gold
colour green
colour blue
colour black
colour red
colour gold
colour green
colour blue
colour black
colour red
colour gold
colour green
colour blue
colour black
CT DiaGrit Ø 200 mm
79,00
67,00
59,00
59,00
59,00
95,50
75,50
69,00
69,00
69,00
130,50
107,50
95,50
95,50
95,50
PIATTO016 CT DiaGrit 80+ grain size 80
colour red
colour gold
colour green CT DiaGrit+ Ø 200 mm
colour blue
colour black
123,00
102,50
91,50
91,50
91,50
colour red
colour gold
colour blue
colour black
147,50
117,00
106,00
106,00
106,00
colour red
colour gold
colour blue
colour black
200,50
166,00
147,50
147,50
147,50
Quantity discount: 5% discount for orders from 5 items
Corundum sharpening stone
AZS001 sharpening stone for free-cutting of diamond grinding discs
(DIPLAS, CT DiaGrits, or other) and diamond cutting discs
7,90
29
Wet grinding paper
SiC - Wet grinding paper not self-adhesive
NSP105
NSP001
NSP002
NSP003
NSP004
NSP005
NSP006
NSP007
NSP008
NSP009
NSP010
NSP011
NSP013
NSP109
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
60, 240 µm
80, 196 µm
120, 120 µm
180, 75 µm
220, 65 µm
320, 46 µm
400, 35 µm Ø 200 mm, not self-adhesive, PU 100 sheet
500, 30 µm
600, 25 µm
800, 22 µm
1000, 18 µm
1200, 15 µm
2500, 10 µm
4000, 5 µm
Price €/PU
72,00
57,00
46,50
41,50
41,50
41,50
41,50
41,50
41,50
41,50
41,50
41,50
51,00
109,00
NSP106
NSP014
NSP015
NSP016
NSP017
NSP018
NSP019
NSP020
NSP021
NSP022
NSP023
NSP024
NSP026
NSP110
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
60, 240 µm
80, 196 µm
120, 120 µm
180, 75 µm
220, 65 µm
320, 46 µm
500, 30 µm
600, 25 µm
800, 22 µm
1000, 18 µm
1200, 15 µm
2500, 10 µm
4000, 5 µm
86,00
77,50
59,50
53,50
53,50
53,50
53,50
53,50
53,50
53,50
53,50
53,50
64,00
140,50
NSP107
NSP027
NSP028
NSP029
NSP030
NSP031
NSP032
NSP033
NSP034
NSP035
NSP036
NSP037
NSP039
NSP111
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
60, 240 µm
80, 196 µm
120, 120 µm
180, 75 µm
220, 65 µm
320, 46 µm
500, 30 µm
600, 25 µm
800, 22 µm
1000, 18 µm
1200, 15 µm
2500, 10 µm
4000, 5 µm
97,50
86,00
70,00
59,00
59,00
59,00
59,00
59,00
59,00
59,00
59,00
59,00
72,00
186,00
NSP108
NSP040
NSP041
NSP042
NSP043
NSP044
NSP045
NSP046
NSP047
NSP048
NSP049
NSP050
NSP052
NSP112
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
grain size
60, 240 µm
80, 196 µm
120, 120 µm
180, 75 µm
220, 65 µm
320, 46 µm
500, 30 µm
600, 25 µm
800, 22 µm
1000, 18 µm
1200, 15 µm
2500, 10 µm
4000, 5 µm
140,00
123,00
94,00
83,00
83,00
83,00
83,00
83,00
83,00
83,00
83,00
83,00
99,00
263,50
30
SiC - Wet grinding paper not self-adhesive
NSP113
NSP114
NSP115
NSP116
NSP117
NSP118
NSP119
grain size
60, 240 µm
grain size 120, 120 µm
Ø 350 mm, not self-adhesive, PU 100 sheet
Price €/PU
226,00
163,50
152,00
152,00
152,00
152,00
152,00
SiC - Wet grinding paper self-adhesive
NSP054
NSP055
NSP058
NSP060
NSP062
NSP063
NSP066
NSP067
NSP068
NSP069
NSP070
NSP071
NSP072
NSP073
NSP074
NSP075
NSP076
grain size
80, 196 µm
NSP079
NSP080
NSP081
NSP082
NSP083
NSP084
NSP085
NSP086
NSP087
NSP088
NSP089
grain size
80, 196 µm
NSP092
NSP093
NSP094
NSP095
NSP096
NSP097
NSP098
NSP099
NSP100
NSP101
NSP102
grain size
80, 196 µm
Ø 200 mm, self-adhesive, PU 100 sheet
Minimum order quantity: 5 PU per grain size
80,50
75,00
75,00
75,00
75,00
75,00
100,00
93,00
88,50
88,50
88,50
88,50
88,50
88,50
88,50
88,50
88,50
124,00
108,50
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
167,00
144,50
139,00
139,00
139,00
139,00
139,00
139,00
139,00
139,00
139,00
Quantity discount for SiC- Wet grinding paper
– per item:
For orders from 5 PU 3 %
Minimum order quantity: 1 VE (except Ø 230 mm
self-adhesive)
SiC-Wet grinding paper Ø 305 mm not selfadhesive on request
(Delivery time approx. 3 weeks)
Delivery time: approx. 3 - 4 days
Exception: approx. 3 weeks delivery time after incoming orders for (if
items not in stock!:
Not self-adhesive: grain size 60 in Ø 200 mm und Ø 250 mm,
grain size 220 in Ø 200 mm, grain size 2500 in Ø 200 mm (mostly in
stock),
Grain size 4000 in all diameters
Self-adhesive: all grain sizes in Ø 230 mm, grain size 80, 500, 800
in Ø 250 mm and grain size 80, 500 in Ø 300 mm
Other measurements and grain sizes on request!
31
SiC-paper foiled
The SiC paper is laminated with a foil and perfectly suited for our adapter disc GeccoFix.
Advantages:
- Same features as the not self-adhesive SiC-paper
- Lies flat on the adapter disc and does not curl, thereby also reusable
- Holds even better on the GeccoFix than the not self-adhesive SiC-paper
NSP123
NSP124
NSP125
NSP126
NSP127
NSP128
grain size
80, 196 µm
Ø 250 mm, PU 100 sheet
NSP129 grain size
80, 196 µm
NSP130 grain size 120, 120 µm
Ø 300 mm, PU 100 sheet
Other grain sizes and diameters on request
Price €/PU
109,00
92,00
86,00
86,00
86,00
86,00
159,00
130,00
122,00
122,00
122,00
122,00
Quantity discount: For orders from 5 PU 3 %, for orders from 10 PU 6 %, for orders from 20 PU 10 %
Delivery time: 2 - 3 weeks, if not in stock
Endless fabric abrasive belts for belt grinders available on request
Abrasive material: Corundum or silicon carbide
Zircon corundum - Wet grinding paper
Zirko001
Zirko002
Zirko003
Zirko004
Zirko005
Zirko006
grain size 80
grain size 80
grain size 80
grain size 120
grain size 120
grain size 120
Ø 200 mm
Ø 250 mm
Ø 300 mm
Ø 200 mm
Ø 250 mm
Ø 300 mm
not self-adhesive, PU 25 sheet
108,00
108,00
137,00
108,00
108,00
137,00
Aluminum oxide (corundum) – Wet grinding paper on request!
New: Disc-storage-box for storage of new and used polishing wheels, SiC paper and grinding
wheels for Ø 200 mm und Ø 250 mm see page 40
The adapter disc CT GeccoFix can be used with rear-coated and self-adhesive polishing cloths as well as with
coated SiC paper.
It works well with our non-self-adhesive SiC paper!
Good adhesion, the products are easy to apply and remove.
Magnetically-adhesive onto all magnet carrier discs.
Price €
On steel disc:
Gek001
Gek004
Gek002
Gek005
Gek003
Gek006
CT GeccoFix
CT GeccoFix
CT GeccoFix
CT GeccoFix
CT GeccoFix
CT GeccoFix
Ø 350 mm on request!
Ø 200 mm
Ø 200 mm
Ø 250 mm
Ø 250 mm
Ø 300 mm
Ø 300 mm
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
37,00
72,00
44,00
86,00
53,50
104,00
32
Adapter disc CT GeccoFix flex
The adapter disc CT GeccoFix flex applies the same features as the CT GeccoFix, but is attached on ferro-foil.
Price €
On Ferro-foil:
Gek007
CT GeccoFix flex Ø 200 mm
Gek010
Gek013
Gek014
Gek008
Gek011
Gek009
Gek012
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
31,00
59,50
35,00
67,00
37,00
72,00
44,50
86,50
Adapter disc CT GeccoFix self-adhesive
The adapter disc CT GeccoFix self-adhesive applies the same features as the CT GeccoFix, but is self-adhesive.
Self-adhesive:
Gek015
CT GeccoFix self-adhesive Ø 200 mm
Gek018
Gek021
Gek022
Gek016
Gek019
Gek017
Gek020
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
31,00
59,50
35,00
67,00
37,00
72,00
44,50
86,50
GripFix
The adapter disc for the fixing of non-self-adhesive wet grinding papers
that keeps what it promises!
We guarantee the changing of at least 80 wet grinding paper sheets when used correctly.
GripFix can be used without problems on all magnetic carrier discs as it is applied on a ferrous foil. After
stripping off the protective film (do not discard) wet surface with water, reducing sticking strength a little, whilst
remaining more than sufficient for fixing of wet grinding paper. After use grinding paper should be removed and if
GripFix is no longer required, drying-out of adhesive surface can be reduced by attaching protective foil, so you
have a durable GripFix - adapter disc.
GF001
GF002
GF003
GripFix Ø 200 mm
GripFix Ø 250 mm
GripFix Ø 300 mm
9,00
11,30
13,30
33
Klebfix - Adhesive foil for non self-adhesive SiC-Paper
KF001
KF002
KF003
KF004
KlebFix
KlebFix
KlebFix
KlebFix
Ø 203 mm
Ø 230 mm
Ø 254 mm
Ø 305 mm
PU 10 pieces
PU 10 pieces
PU 10 pieces
PU 10 pieces
Price €/PU
20,00
27,50
32,50
38,00
Adhesive spray - removable
Adhesive spray for attaching non self-adhesive SiC-Paper onto adapter discs.
Very easy to use and disposal of adhesive residues without solvent possible.
Price €
HSK001
22,80
Adhesive spray can 400 ml
Grindstones ALPLAS
Grindstones for the surface grinding of test fasteners on the AbraPlan or MAPS made by the company Struers.
Grindstones for other device types are available on request.
ALPLAS is an Al2O3 - grindstone for normal applications for example steel, hardened steel,
aluminium alloys, pottery, composites and other.
ALPLAS001
ALPLAS002
ALPLAS003
ALPLAS004
ALPLAS005
grindstone Al2O3 grain size
A 36
A 60
A 80
A 120
A 150
262,00
262,00
262,00
262,00
262,00
Delivery time if not in stock: approx 4 to 6 weeks! Other grain sizes on request!
SiC – grindstones, pot grinding discs and diamond- and aluminum oxide foils available
on request!
34
CT GriFin Soft 9
The fine grinding disc for optimum flatness!
CT GriFin Soft 9 is a composite disc for single stage fine grinding of materials which exhibits a hardness
of under 150 HV.
In the process a diamond suspension (or diamond spray) and a lubricant are added.
CT GriFin Soft 9 replaces the further grinding with SiC-paper (2-4 grinding steps).
CT GriFin Soft 9 achieves a high material removal and perfect flatness over complete sample crosssection.
After a preparation step with CT GriFin Soft 9, the sample is prepared already optimally for polishing.
CT GriFin Soft 9 works most efficient with 9 µm diamond products. It can be used with either a diamond
suspension or diamond spray with lubricant. You can use green or yellow, or the easiest way is to use a
two-in-One suspension, such as suspension CT DiaTwin 9 µm.
- High material removal with low distortion-depth
- High flatness and perfect edge sharpness
- Savings of 2-4 grinding steps on SiC-paper
- For materials with a hardness of under 150 HV
- Corrosion resistant
Lar001
Lar007
Lar002
Lar003
Lar008
Lar004
Lar005
Lar009
Lar006
CT GriFin Soft 9
CT GriFin Soft 9
CT GriFin Soft 9
CT GriFin Soft 9
CT GriFin Soft 9
CT GriFin Soft 9
CT GriFin Soft 9
CT GriFin Soft 9
CT GriFin Soft 9
ø 200 mm
ø 200 mm
ø 200 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 300 mm
ø 300 mm
ø 300 mm
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
Price €
42,50
83,00
191,00
54,50
107,00
238,00
63,50
125,00
278,00
CT GriFin 9
The fine grinding disc for optimum flatness!
CT GriFin 9 is a composite disc for single stage fine grinding of materials which exhibits a hardness of
over 150 HV.
In the process a diamond suspension (or diamond spray) and a lubricant are added.
CT GriFin 9 replaces the further grinding with SiC-paper (2-4 grinding steps).
CT GriFin 9 achieves a high material removal and perfect flatness over complete sample cross-section.
After a preparation step with CT GriFin 9, the sample is prepared already optimal for polishing.
CT GriFin 9 works most efficient with 9 µm diamond products. It can be used with either a diamond
suspension or diamond spray with lubricant. You can use green or yellow, or the easiest way is to use a
two-in-One suspension, such as suspension CT DiaTwin 9 µm.
- Savings of 2-4 grinding steps on SiC-paper
- For materials with a hardness of over 150 HV
FEGAS001
FEGAS007
FEGAS002
FEGAS003
FEGAS008
FEGAS004
FEGAS005
FEGAS009
FEGAS006
CT GriFin 9
CT GriFin 9
CT GriFin 9
CT GriFin 9
CT GriFin 9
CT GriFin 9
CT GriFin 9
CT GriFin 9
CT GriFin 9
ø 200 mm
ø 200 mm
ø 200 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 300 mm
ø 300 mm
ø 300 mm
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
42,50
83,00
191,00
54,50
107,00
238,00
63,50
125,00
278,00
35
CT GriFin 3 and CT GriFin 1
The polishing discs for optimum flatness!
CT GriFin 3 and CT GriFin 1 are composite discs for one-step polishing of materials, which have a
hardness of over 150 HV.
CT GriFin 3 and CT GriFin 1 replace the polishing with polishing cloths of ceramics, hard metals and
other materials.
CT GriFin 3 and CT GriFin 1 achieve a high material removal and perfect flatness over complete sample
cross-section.
After this polishing step with CT GriFin 3 or CT GriFin 1, the sample is prepared already optimal for
microscopic examination.
CT GriFin 3 and CT GriFin 1 work best with a 3 µm respectively 1 µm diamond suspension without
lubricant.
- For materials with a hardness of over 150 HV
ALGN001
ALGN013
ALGN002
ALGN003
ALGN014
ALGN004
ALGN005
ALGN015
ALGN006
CT GriFin 3
CT GriFin 3
CT GriFin 3
CT GriFin 3
CT GriFin 3
CT GriFin 3
CT GriFin 3
CT GriFin 3
CT GriFin 3
ø 200 mm
ø 200 mm
ø 200 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 300 mm
ø 300 mm
ø 300 mm
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
Price €
42,50
83,00
191,00
54,50
107,00
238,00
63,50
125,00
278,00
ALGN007
ALGN016
ALGN008
ALGN009
ALGN017
ALGN010
ALGN011
ALGN018
ALGN012
CT GriFin 1
CT GriFin 1
CT GriFin 1
CT GriFin 1
CT GriFin 1
CT GriFin 1
CT GriFin 1
CT GriFin 1
CT GriFin 1
ø 200 mm
ø 200 mm
ø 200 mm
ø 250 mm
ø 250 mm
ø 250 mm
ø 300 mm
ø 300 mm
ø 300 mm
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
1 piece
2 pieces
5 pieces
42,50
83,00
191,00
54,50
107,00
238,00
63,50
125,00
278,00
36
Polishing cloths
PT Plan
A very hard and extremely flat polishing cloth. It is very suitable for fine grinding with 15 and 9 µm diamond products and for
polishing with 3 and 6 μm. Suitable for manual and automatic preparation. High material removal rate - very excellent edge
sharpness!
PT Super Plan
A very hard layered chemical fibre cloth with a very plan surface. For fine grinding, pre- and final polishing with diamond
polishing materials from 45 to 1 µm. Very long lifetime and good flatness because of low impact resilience!
PT Super Plan Perforated
Perforated, very tough layered chemical fibre cloth with a very flat surface. For fine grinding, pre- and final polishing with
diamond polishing materials 45 - 1 µm. Very long lifetime and good flatness because of low impact resilience!
PT Pan
A firm, hard and dense synthetic fibre cloth with very low impact resilience. Suitable for pre-, intermediate- and final polishing
with diamond polishing materials 25 - 1 µm. High level of flatness and good edge sharpness!
PT Silk
Medium hard synthetic silk cloth for polishing with diamond polishing materials from 15 to 3 µm. Perfect flatness, high
durability and very excellent polishing results!
PT Seda / PT Seda Blue
Medium hard synthetic silk cloth for polishing with diamond polishing materials from 6 to 0,25 µm. Perfect flatness, very
excellent polishing results!
PT Mol
Woven Polishing cloth from 100% new wool for intermediate- and final polishing with diamond polishing materials 9 -3 µm.
Newly developed high quality! Very good polishing performance, perfect flatness, long life time!
PT Flock
Soft, flocked polishing cloth with absorbent viscose fibres. Suitable for pre- and final polishing with diamond polishing
materials, 3 µm or thinner. Very good flatness and polished surface!
PT Plus Violet
Robust synthetic fiber cloth. Suitable for pre-and final polishing with diamond polishing materials, 3 µm or finer and with oxide
polishing materials.
PT Nap
Short pile velvet cloth for final polishing with diamond products < 3 µm and for oxide polish suitable. Excellent flatness and
long life time!
PT Skin
Dense, non-woven polishing cloth made of 100% polyester fibres, Suitable for pre-and final polishing with diamond- or oxide
polishing materials.
Excellent flatness!
PT Chem
Chemical-resistant, porous, soft synthetic cloth. For final polishing (also chemical-mechanical) with oxide polishing materials
suitable.
Excellent flatness.
PT Chem Perforated
Perforated, chemical-resistant, soft synthetic cloth. For final polishing (also chemical-mechanical) with oxide polishing
materials suitable. Extensive samples can be edited very well, because they are not "sucked" by the specific surface. Short
polishing times and good flatness. Less consumption of final polishing suspension!
37
Polishing cloths, self-adhesive
Diamond polishing cloths, Ø 200 mm, self-adhesive, PU of 5 pieces
PT001
PT022
PT025
PT004
PT007
PT067
PT095
PT040
PT074
PT010
PT031
PT089
PT016
PT028
PT Plan
PT Super Plan
PT Pan
PT Silk
PT Seda
PT Seda Blue
PT Mol
PT Plus Violet
PT Flock
PT Nap
PT Skin
PT Chem
PT Chem Perforated
hard synthetic fibre cloth
very hard chemistry fibre cloth
very hard chemistry fibre cloth, perforated
medium-hard synthetic silk cloth
woven polishing cloth from 100 % new wool
robust synthetic fibre cloth
soft, flocked polishing cloth
short pile velvet cloth, black
soft polyester cloth
soft synthetic cloth, chemically resistant
Price €/PU
36,50
65,50
86,50
36,50
36,50
33,50
41,00
44,50
52,00
40,00
50,00
36,50
55,00
60,50
PT002
PT023
PT026
PT005
PT008
PT068
PT096
PT041
PT075
PT011
PT032
PT090
PT017
PT029
PT Plan
PT Super Plan
PT Pan
PT Silk
PT Seda
PT Seda Blue
PT Mol
PT Plus Violet
PT Flock
PT Nap
PT Skin
PT Chem
PT Chem Perforated
58,00
92,50
126,00
58,00
58,00
50,50
53,00
67,00
71,00
60,50
74,00
58,00
78,50
85,50
PT003
PT024
PT027
PT006
PT009
PT069
PT097
PT042
PT076
PT012
PT033
PT091
PT018
PT030
PT Plan
PT Super Plan
PT Pan
PT Silk
PT Seda
PT Seda Blue
PT Mol
PT Plus Violet
PT Flock
PT Nap
PT Skin
PT Chem
PT Chem Perforated
Quantity discount for polishing cloths - per items: for orders from 5 PU - 10% discount
75,50
120,50
165,50
75,50
75,50
59,50
62,50
78,50
89,00
73,50
88,50
75,50
102,50
110,00
38
MAGPOL S – magnetic polishing cloths on steel disc
Diamond polishing cloths, Ø 200 mm, on steel disc, PU of 5 pieces
SPT001
SPT022
SPT025
SPT004
SPT007
SPT067
SPT095
SPT040
SPT074
SPT010
SPT031
SPT089
SPT016
SPT028
PT Plan S
PT Super Plan S
PT Super Plan Perforated S
PT Pan S
PT Silk S
PT Seda S
PT Seda Blue S
PT Mol S
PT Plus Violet S
PT Flock S
PT Nap S
PT Skin S
PT Chem S
PT Chem Perforated S
Price €/PU
52,5056,50
81,5072,00
102,5082,50
52,5041,00
52,5051,50
49,50
50,00
60,50
73,00
56,0051,50 46,50
66,00
52,50
71,0072,00
76,00
SPT002
SPT023
SPT026
SPT005
SPT008
SPT068
SPT096
SPT041
SPT075
SPT011
SPT032
SPT090
SPT017
SPT029
PT Plan S
PT Super Plan S
PT Pan S
PT Silk S
PT Seda S
PT Seda Blue S
PT Mol S
PT Plus Violet S
PT Flock S
PT Nap S
PT Skin S
PT Chem S
76,0077,00
110,5093,00
144,00
113,00
76,0062,00
76,0072,00
68,50
62,50
85,00
96,50
78,0072,00 62,00
92,00
76,00
97,00
103,50
SPT003
SPT024
SPT027
SPT006
SPT009
SPT069
SPT097
SPT042
SPT076
SPT012
SPT033
SPT091
SPT018
SPT030
PT Plan S
PT Super Plan S
PT Pan S
PT Silk S
PT Seda S
PT Seda Blue S
PT Mol S
PT Plus Violet S
PT Flock S
PT Nap S
PT Skin S
PT Chem S
Quantity discount for polishing cloth - per items: for orders from 5 PU - 10% discount
97,0098,00
141,50
113,00
187,00
144,00
97,0072,00
97,00
81,00
71,00
100,50
123,00
94,5093,00
107,00
97,00
112,50
113,00
131,00
72
39
MAGPOL FF – magnetic polishing cloths on Ferro-foil
MAGPOL is a new generation of magnetic polishing cloths. They can be used on all
MD-discs from all manufactures. You simply put their MAGPOL FF on a MD-disc and you can start to polish
immediately. The advantage of MAGPOL is that you don’t have to dispose any valuable raw material (steel) and
you are no longer exposed to risk of injury. The polishing results and durability are excellent with MAGPOL FF.
Diamond polishing cloths, Ø 200 mm, on Ferro-foil, PU of 5 pieces
MPT001
MPT022
MPT025
MPT004
MPT007
MPT067
MPT040
MPT010
MPT031
MPT089
PT Plan M
PT Super Plan M
PT Super Plan Perforated M
PT Pan M
PT Silk M
PT Seda M
PT Mol M
PT Flock M
PT Nap M
PT Skin M
Price €/PU
47,50
76,00
97,00
47,50
47,50
44,50
55,00
51,00
60,50
47,50
MPT002
MPT023
MPT026
MPT005
MPT008
MPT068
MPT041
MPT011
MPT032
MPT090
PT Plan M
PT Super Plan M
PT Pan M
PT Silk M
PT Seda M
PT Mol M
PT Flock M
PT Nap M
PT Skin M
71,00
105,50
139,00
71,00
71,00
63,50
79,00
73,00
87,00
71,00
MPT003
MPT024
MPT027
MPT006
MPT009
MPT069
MPT042
MPT012
MPT033
MPT091
PT Plan M
PT Super Plan M
PT Pan M
PT Silk M
PT Seda M
PT Mol M
PT Flock M
PT Nap M
PT Skin M
Quantity discount for polishing cloths – per items: for orders from 5 PU: 10 %
91,50
136,50
181,50
91,50
91,50
75,50
94,50
89,50
102,00
91,50
40
Polishing cloths in special sizes
PTMM001
PTMM022
PTMM025
PTMM004
PTMM007
PTMM067
PTMM040
PTMM010
PTMM031
PTMM089
PTMM016
PTMM028
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
Plan MM
Super Plan MM
Super Plan Perf. MM
Pan MM
Silk MM
Seda MM
Mol MM
Flock MM
Nap MM
Skin MM
Chem MM
Chem Perforated MM
Price €/PU
20,00
32,00
35,00
20,00
20,00
18,00
22,00
20,00
24,00
20,00
26,50
26,50
PTMM002
PTMM023
PTMM026
PTMM005
PTMM008
PTMM068
PTMM041
PTMM011
PTMM032
PTMM090
PTMM017
PTMM029
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
Plan MM
Super Plan MM
Super Plan Perf. MM
Pan MM
Silk MM
Seda MM
Mol MM
Flock MM
Nap MM
Skin MM
Chem MM
Chem Perforated MM
30,00
47,50
52,50
30,00
30,00
27,00
33,50
30,00
36,50
30,00
39,50
39,50
Other special sizes on request!
Disc-storage-box
Disc-storage-box for storage of new and used polishing wheels, SiC paper and grinding wheels for Ø 200 mm
and Ø 250 mm:
stackable
individual configuration of several drawers possible
For Ø 200 mm and Ø 250 mm:
Price €
SAB001 Disc-storage-box with 10 drawers
height each 12 mm, 290 x 290 x 125 mm (W x D x H)
height each 24 mm, 290 x 290 x 125 mm (W x D x H)
3 x height 36 mm and 1 x height 12 mm, 290 x 290 x 125 mm (W x D x H)
SAB004 Disc-storage-box without drawers
(empty), 290 x 290 x 125 mm (W x D x H)
SAB005 drawer 12 mm height, 289 x 289 x 12 mm (W x D x H)
185,00
138,00
129,00
75,00
11,50
13,50
15,50
41
The adapter disc CT GeccoFix can be used with rear-coated and self-adhesive polishing cloths as well as with
coated SiC paper.
It works well with our non-self-adhesive SiC paper!
Good adhesion, the supplies are easy to apply and remove.
Magnetically-adhesive onto all magnet carrier discs.
Price €
Gek001
CT GeccoFix
Gek004
CT GeccoFix
Gek002
CT GeccoFix
Gek005
CT GeccoFix
Gek003
CT GeccoFix
Gek006
CT GeccoFix
Ø 200 mm
Ø 200 mm
Ø 250 mm
Ø 250 mm
Ø 300 mm
Ø 300 mm
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
37,00
72,00
44,00
86,00
53,50
104,00
Adapter disc CT GeccoFix flex
The adapter disc CT GeccoFix-flex applies the same features as the CT GeccoFix, but is attached on ferro-foil.
On Ferro-foil:
Gek007
Gek010
Gek013
Gek014
Gek008
Gek011
Gek009
Gek012
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
31,00
59,50
35,00
67,00
37,00
72,00
44,50
86,50
Adapter disc CT GeccoFix self-adhesive
The adapter disc CT GeccoFix self-adhesive applies the same features as the CT GeccoFix, but is self-adhesive.
Self-adhesive:
Gek015
Gek018
Gek021
Gek022
Gek016
Gek019
Gek017
Gek020
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
31,00
59,50
35,00
67,00
37,00
72,00
44,50
86,50
42
Magnet adapter disc MAGAS
Magnet adapter disc – MAGAS
The magnetic adapter is a metal disc with a polymer coating. It is particularly suitable for fixing self-adhesive
sanding papers and polishing cloths and can be adapted to all magnetic systems.
 3D - surface for easy adhesive bonding
 Corrosion resistant
MAS001
MAS007
MAS003
MAS008
MAS005
MAS009
MAGAS
MAGAS
MAGAS
MAGAS
MAGAS
MAGAS
ø 200 mm
ø 200 mm
ø 250 mm
ø 250 mm
ø 300 mm
ø 300 mm
1 piece
2 pieces
1 piece
2 pieces
1 piece
2 pieces
34,00
66,00
37,00
72,00
40,50
79,00
MAGFOL - magnetic foil
MAGFOL is a self-adhesive magnetic foil which is simply stuck onto a carrier disc. Now all magnetic adapter
discs or polishing cloths can be fitted with a magnetic back.
MagFol001
MagFol002
MagFol003
MagFol Ø 200 mm
MagFol Ø 250 mm
MagFol Ø 300 mm
Ø 230 mm or Ø 350 mm on request!
25,00
31,50
36,00
43
Diamond - suspensions
Mono- and Polycrystalline
Diamond suspensions are used a lot these days, because of the widespread automation of sample preparation,
the preferred medium for the dosage of diamonds.
Our suspensions are developed according to following aspects:
 Environmental friendliness
 Reproducible results
 Preferably short preparation times
High concentration Our diamond-suspensions have a concentration of 20 ct/l.
All diamond suspensions in 250 ml are delivered with spray head!
Monocrystalline diamond suspension water-based
DSU-M001-CT
DSU-M006-CT
DSU-M011-CT
DSU-M002-CT
DSU-M007-CT
DSU-M012-CT
DSU-M003-CT
DSU-M008-CT
DSU-M013-CT
DSU-M004-CT
DSU-M009-CT
DSU-M014-CT
DSU-M005-CT
DSU-M010-CT
DSU-M015-CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
Diamond Suspension Mono 15 µm 250 ml
Diamond Suspension Mono 15 µm 1 l
Diamond Suspension Mono 15 µm 2,5 l
Diamond Suspension Mono 9 µm 250 ml
Diamond SuspensionMono 9 µm 1 l
Diamond SuspensionMono 9 µm 2,5 l
Diamond SuspensionMono 6 µm 250 ml
Price €
30,00
102,00
241,50
30,00
102,00
241,50
30,00
102,00
241,50
30,00
102,00
241,50
30,00
102,00
241,50
Monocrystalline + diamond Suspension water-based
Monocrystalline diamond Suspension with higher diamond concentration approx 40 ct/l
DSU-M016-CT
DSU-M021-CT
DSU-M026-CT
DSU-M017-CT
DSU-M022-CT
DSU-M027-CT
DSU-M018-CT
DSU-M023-CT
DSU-M028-CT
DSU-M019-CT
DSU-M024-CT
DSU-M029-CT
DSU-M020-CT
DSU-M025-CT
DSU-M030-CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
Diamond Suspension Mono + 15 µm 250 ml
Diamond Suspension Mono + 15 µm 1 l
Diamond Suspension Mono + 15 µm 2,5 l
41,50
142,00
340,50
41,50
142,00
340,50
41,50
142,00
340,50
41,50
142,00
340,50
41,50
142,00
340,50
Quantity discount for diamond suspensions: for orders from 3 items: 5 %, for orders from 10 items: 10 %
44
Polycrystalline diamond suspension water-based
DSU-P001-CT
DSU-P008-CT
DSU-P015-CT
DSU-P002-CT
DSU-P009-CT
DSU-P016-CT
DSU-P003-CT
DSU-P010-CT
DSU-P017-CT
DSU-P004-CT
DSU-P011-CT
DSU-P018-CT
DSU-P005-CT
DSU-P012-CT
DSU-P019-CT
DSU-P006-CT
DSU-P013-CT
DSU-P020-CT
DSU-P007-CT
DSU-P014-CT
CT Diamond Suspension Poly 15
µm 250 ml
µm 1 l
µm 2,5 l
µm 250 ml
µm 1 l
µm 2,5 l
µm 250 ml
µm 1 l
µm 2,5 l
µm 250 ml
µm 1 l
µm 2,5 l
µm 250 ml
µm 1 l
µm 2,5 l
CT Diamond Suspension Poly 0,25 µm 250 ml
CT Diamond Suspension Poly 0,25 µm 1 l
CT Diamond Suspension Poly 0,25 µm 2,5 l
Price €
49,00
179,00
431,00
49,00
179,00
431,00
49,00
179,00
431,00
49,00
179,00
431,00
49,00
179,00
431,00
49,00
179,00
431,00
82,50
220,50
Polycrystalline + diamond suspension water-based
Polycrystalline diamond suspension with higher diamond concentration approx. 40 ct/l
DSU-P025-CT
DSU-P030-CT
DSU-P026-CT
DSU-P031-CT
DSU-P027-CT
DSU-P032-CT
DSU-P028-CT
DSU-P033-CT
DSU-P029-CT
DSU-P034-CT
CT Diamond Suspension Poly + 15 µm 250 ml
CT Diamond Suspension Poly + 15 µm 1 l
72,00
254,00
72,00
254,00
72,00
254,00
72,00
254,00
72,00
254,00
Polycrystalline diamond suspension water-free
DSUWF-P001-CT
DSUWF-P008-CT
DSUWF-P002-CT
DSUWF-P009-CT
DSUWF-P003-CT
DSUWF-P010-CT
DSUWF-P004-CT
DSUWF-P011-CT
DSUWF-P005-CT
DSUWF-P012-CT
DSUWF-P006-CT
DSUWF-P013-CT
µm 250 ml
µm 1 l
µm 250 ml
µm 1 l
µm 250 ml
µm 1 l
µm 250 ml
µm 1 l
µm 250 ml
µm 1 l
55,00
196,00
55,00
196,00
55,00
196,00
55,00
196,00
55,00
196,00
55,00
196,00
Quantity discount for diamond suspensions (except alcohol-based): for orders from 3 items: 5 %, for
orders from 10 items: 10 %
Diamond suspensions alcohol-based
Monocrystalline diamond suspensions alcohol-based
DSUA-M006
DSUA-M007
DSUA-M008
DSUA-M009
DSUA-M010
Diamond Suspension Mono A 15 µm 1 l
120,00
120,00
120,00
120,00
120,00
45
Polycrystalline diamond suspensions alcohol-based
DSUA-P001
DSUA-P008
DSUA-P002
DSUA-P009
DSUA-P003
DSUA-P010
DSUA-P004
DSUA-P011
DSUA-P005
DSUA-P012
DSUA-P006
DSUA-P013
Diamond Suspension Poly A
15 µm 250 ml
15 µm 1 l
9 µm 250 ml
9 µm 1 l
6 µm 250 ml
6 µm 1 l
3 µm 250 ml
3 µm 1 l
1 µm 250 ml
1 µm 1 l
0,25 µm 250 ml
0,25 µm 1 l
Price €
59,50
216,50
59,50
216,50
59,50
216,50
59,50
216,50
59,50
216,50
59,50
216,50
Diamond pastes
Overview CT diamond pastes Poly- and Monocrystalline
The CT diamond paste has a very high diamond concentration, 500ct/l. Even with using a small amount of this
paste you can reach a high material removal.
This is ideal suitable for polishing of the mobile component test.
Monocrystalline CT diamond paste
DPA-M003-CT
DPA-M004-CT
DPA-M005-CT
DPA-M006-CT
DPA-M007-CT
CT diamond paste Mono 15 µm
10 g
10 g
10 g
10 g
10 g
34,50
34,50
34,50
34,50
34,50
10 g
10 g
10 g
10 g
10 g
10 g
10 g
66,00
66,00
66,00
66,00
66,00
66,00
78,00
Polycrystalline CT diamond paste
DPA-P010-CT
DPA-P011-CT
DPA-P012-CT
DPA-P013-CT
DPA-P014-CT
DPA-P015-CT
DPA-P016-CT
CT diamond paste Poly 15 µm
CT diamond paste Poly 0,25 µm
CT diamond paste Poly 0,1 µm
Quantity discount for CT diamond pastes: for orders from 3 items: 5 %, for orders from 10 items: 10 %
Diamond-Stick
The new Diamond-stick is mainly used for mobile preparation and fast application of CT diamond paste
on the polishing cloth.
A stick is easier to use as a paste and the polishing material can also be applied during the polishing process.
Our Diamond Stick is compatible with water-, glycol- and ethanol-based lubricants.
It contains less than 0.1% water and therefore it is perfectly suited for water-free preparation.
The high diamond concentration of 250 ct / l ensures high removal rates.
Monocrystalline
DST-M001
DST-M002
DST-M003
DST-M004
Diamond-Stick Mono
Diamond-Stick Mono
Diamond-Stick Mono
Diamond-Stick Mono
9 µm
6 µm
3 µm
1 µm
20 g
20 g
20 g
20 g
44,50
44,50
44,50
44,50
9 µm
6 µm
3 µm
1 µm
0,25 µm
20 g
20 g
20 g
20 g
20 g
79,50
79,50
79,50
79,50
79,50
Polycrystalline
DST-P001
DST-P002
DST-P003
DST-P004
DST-P005
Diamond-Stick Poly
Diamond-Stick Poly
Diamond-Stick Poly
Diamond-Stick Poly
Diamond-Stick Poly
46
Diamond sprays
The diamond spray has replaced the paste almost completely. There have been many attempts to produce better and more effective
suspensions, but the combination of diamond spray and an alcohol-based Lubricant is still considered the best alternative. Our spray is
developed to:
 Preferably short preparation times
 Water-free polishing
 Environmental friendliness
Environmental friendliness
The spray consists of ethanol (99.9%), diamonds and environmentally friendly CO2, that instead of the normally used butane-propane mix,
which is actually a lighter gas, is used as a propellant gas. The ethanol evaporates quickly and the diamonds are freely accessible.
The spray is the dosage form with the most effective removal.
High concentration
The material removal is increased together with the growing concentration of diamonds, but only up to a certain limit.
A further addition of diamonds has only a low effect on the removal. All our diamond sprays have a concentration of 26.5 ct/l.
Water-free
The products contain less than 0.1% water. Therefore, the spray can be used very well with the Lubricant Blue,
if you need a water-free polishing.
Price €
Monocrystalline diamond-spray Mono
DSP-M002
DSP-M003
DSP-M004
DSP-M005
Diamond Spray Mono
Diamond Spray Mono
Diamond Spray Mono
Diamond Spray Mono
9
6
3
1
µm 150 ml
µm 150 ml
µm 150 ml
µm 150 ml
38,00
38,00
38,00
38,00
Polycrystalline diamond-spray Poly
DSP-P002
DSP-P003
DSP-P004
DSP-P005
DSP-P006
Diamond Spray Poly
Diamond Spray Poly
Diamond Spray Poly
Diamond Spray Poly
Diamond Spray Poly
9
µm 150 ml
6
µm 150 ml
3
µm 150 ml
1
µm 150 ml
0,25 µm 150 ml
51,00
51,00
51,00
51,00
51,00
Diamond spray NFG - Pump spray without compressed air
The alternative to the traditional diamond spray - no compressed air. Therefore, not flammable, but
with the same properties and with higher diamond concentration (30 ct/l instead of 26.5 ct/l)!
Monocrystalline CT diamond spray NFG
DSP-M006-CT
DSP-M007-CT
DSP-M008-CT
DSP-M009-CT
DSP-M010-CT
CT
CT
CT
CT
CT
Diamond Spray Mono NFG 15
µm 150 ml
µm 150 ml
µm 150 ml
µm 150 ml
µm 150 ml
33,50
33,50
33,50
33,50
33,50
15
µm 150 ml
9
µm 150 ml
6
µm 150 ml
3
µm 150 ml
1
µm 150 ml
0,25 µm 150 ml
44,50
44,50
44,50
44,50
44,50
44,50
Polycrystalline CT diamond spray NFG
DSP-P008-CT
DSP-P009-CT
DSP-P010-CT
DSP-P011-CT
DSP-P012-CT
DSP-P013-CT
CT
CT
CT
CT
CT
CT
Diamond Spray Poly NFG
Quantity discount for CT diamond sprays NFG: for orders from 3 items: 5 %, for orders from 10 items: 10 %
47
Two-in-One diamond suspensions
- Time saving in the preparation is up to 50% possible A big advantage is that you have to handle one liquid only instead of two, suspension and lubricant. CT DiaTwin is a ready mix of lubricant
and suspension, permanently stable, so that reproducible results are guaranteed. The increased removal of our lubricant was retained
completely, so you can expect up to 30 – 50% shorter preparation times (CT DiaTwin Poly). Use our practical pump spray bottle for perfect
manual dosage. Also available with automatic dosing system for lubricants. This saves room for several grain sizes.
 Short preparation time
 Full flexibility; adjust the diamond concentration with extender or suspension
 Little impact of overdose
 Water-based, no labeling obligation
 Biodegradable
The complete program
Based on our lubricant and suspensions we have developed a combination product that makes the dosage very easy. All grain sizes, monoand polycrystalline, are also available as CT DiaTwin. Unlike other mixing products CT DiaTwin adapts to the surface. So you need no
separate CT DiaTwin for polishing and grinding surface, but one can be content with the usual grain sizes. Unlike other 2-in-1 products CT
DiaTwin contains pure mono- or polycrystalline diamonds.
Diamond concentration customize
CT DiaTwin is with our suspensions and extenders complete compatible, so you can customize CT DiaTwin if you want to change the
properties. Dilute with extender, or increase the concentration of diamond by adding diamond suspension.
Little impact of overdose
Because of the low viscosity of the lubricating film the excessive CT DiaTwin spreads quickly to the bedding layer. This reduces the
hydroplaning effect and the negative effects of an overdose are limited to an increased consumption.
CT DiaTwin is prepared with a conservation system that is gentle to the skin. It is free of boric acid, amines and nitrite. CT DiaTwin also
contains no additives of chlorine- and sulfur-base.
Reproducible results
Many factors become important, if short preparation time and reproducibility is expected.
Permanent floating diamonds: CT DiaTwin keeps the abrasive in a homogeneous mixture floating. If the diamonds start to sink to the
ground, the dosage and the size of the diamonds begin to vary, while the bottle is emptied gradually. The consequences are varying polish
results. Both the removal of material and the crack samples vary, as all diamonds sink to the ground, but the heavy (large) diamonds first.
Our CT DiaTwins keep the diamonds permanently floating and therefore the polishing results are the same every time.
Controlled suspension: Small particles - the same goes for diamonds - have a tendency to form aggregates, if the suspension process is
not performed correctly. We control the product and ensure that our specifications are maintained.
Short preparation times
Low grain sizes distribution: If durable abrasives such as diamonds are used, it is important that the grain size distribution is bounded as
much as possible. Large particles scrape stronger and they cause a longer preparation time. Small particles have not the necessary removal
so that they extend the current preparation phase.
Therefore, we use the most strictly sorted diamonds, which are commercially available. Each batch is sorted rigorously and the variation from
batch to batch is minimal.
Concentration: The diamond concentration of CT DiaTwin Poly comes up to a mixture of suspension and lubricant of 1:2, in order to
combine high abrasion with optimal surface.. CT DiaTwin Mono has a concentration corresponding to a mixing ratio of 1:3, to obtain a good
efficiency.
All Two-in-One diamond suspensions in 500 ml are delivered with spray head!
CT DiaTwin Monocrystalline
DDO-M001-CT
DDO-M006-CT
DDO-M002-CT
DDO-M007-CT
DDO-M003-CT
DDO-M008-CT
DDO-M004-CT
DDO-M009-CT
DDO-M005-CT
DDO-M010-CT
CT DiaTwin Mono 15 µm 500 ml
CT DiaTwin Mono 15 µm 5 l
Price €
25,00
209,50
25,00
209,50
25,00
209,50
25,00
209,50
25,00
209,50
48
CT DiaTwin Polycrystalline
DDO-P001-CT
DDO-P006-CT
DDO-P002-CT
DDO-P007-CT
DDO-P003-CT
DDO-P008-CT
DDO-P004-CT
DDO-P009-CT
DDO-P005-CT
DDO-P010-CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
DiaTwin Poly 15 µm 500 ml
DiaTwin Poly 15 µm 5 l
Price €
50,00
427,00
50,00
427,00
50,00
427,00
50,00
427,00
50,00
427,00
CT DiaTwin Max Monocrystalline (= CT DiaTwin Mono +)
Monocrystalline Two-in-One-Suspension with at least twice as high diamond concentration
DDO-M011-CT
DDO-M016-CT
DDO-M012-CT
DDO-M017-CT
DDO-M013-CT
DDO-M018-CT
DDO-M014-CT
DDO-M019-CT
DDO-M015-CT
DDO-M020-CT
CT DiaTwin Max Mono 15 µm 500 ml
CT DiaTwin Max Mono 15 µm 5 l
36,50
308,00
36,50
308,00
36,50
308,00
36,50
308,00
36,50
308,00
CT DiaTwin Max Polycrystalline (= CT DiaTwin Poly +)
Polykristalline Two-in-One-Suspension with at least twice as high diamond concentration
DDO-P011-CT
DDO-P016-CT
DDO-P012-CT
DDO-P017-CT
DDO-P013-CT
DDO-P018-CT
DDO-P014-CT
DDO-P019-CT
DDO-P015-CT
DDO-P020-CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
CT
DiaTwin Max Poly 15 µm 500 ml
DiaTwin Max Poly 15 µm 5 l
78,50
643,00
78,50
643,00
78,50
643,00
78,50
643,00
78,50
643,00
CT DiaTwin Polycrystalline water-free
DDOWF-P001-CT
DDOWF-P002-CT
DDOWF-P003-CT
DDOWF-P004-CT
DDOWF-P005-CT
DDOWF-P006-CT
CT
CT
CT
CT
CT
CT
DiaTwin Poly 15
µm water-free 500 ml
DiaTwin Poly 9
DiaTwin Poly 6
DiaTwin Poly 3
DiaTwin Poly 1
DiaTwin Poly 0,25 µm water-free 500 ml
73,00
73,00
73,00
73,00
73,00
73,00
Quantity discount for Two-in-One diamond suspensions CT Dia Twin: for orders from 3 items: 5 %,
for orders from 10 items: 10 %
49
Lubricants
With the newest knowledge in the development of cooling lubricants, we have produced a series of identical
lubricants, differing only in the thickness of the lubricating film. Lubricant Green has the thinnest lubricant film and
is used when the removal is most important. Lubricant Red has the thickest film for the final polishing when the
finish becomes important. The Lubricant Yellow is in the middle and is used when the Lubricant Green is too
aggressive. The lubricants are complete compatible with each other. Therefore you can create your own unique
mixture, whose properties are adapted especially to your own needs. For example you can mix yellow with green
or yellow with red.
Lubricants Red, Green and Yellow are produced with a conservation system that is mild to the skin. It is free of
boric acid, amines and nitrite. Moreover, no lubricant contains additives of chlorine- and sulfur base. Lubricant
Blue based on pure ethanol, and contains no compulsory labeling material for lubricating film-formation.
Therefore, it is marked only with Fx (combustible).
The complete range of water-based lubricants is biodegradable.
Price €
Lubricants alcohol-based
LU-B001
LU-B002
LU-B003
LU-GE001
LU-GE002
LU-BR001
LU-BR002
Lubricant Blue 1 l
Lubricant Blue 5 l
Lubricant Blue 10 l
Lubricant Gelb 1 l
Lubricant Gelb 5 l
Lubricant Brown 1 l
Lubricant Brown 5 l
for water-free sample preparation, thin
for water-free sample preparation, medium
for water-free sample preparation, medium
16,50
61,00
105,00
16,50
61,00
16,50
61,00
for universal sample preparation, thin
for universal sample preparation, medium
for universal sample preparation, thick
16,50
58,00
237,00
16,50
58,00
237,00
16,50
58,00
237,00
Lubricants hydrous
LU-G001
LU-G002
LU-G004
LU-Y001
LU-Y002
LU-Y004
LU-R001
LU-R002
LU-R004
Lubricant Green 1 l
Lubricant Green 5 l
Lubricant Green 25 l
Lubricant Yellow 1 l
Lubricant Red 1 l
Lubricant Red 5 l
Lubricant Red 25 l
Special-Lubricant for monocrystalline + diamond suspension
LU-C001
LU-C002
Clear+ 1 l
Clear+ 5 l
Lubricant Turquoise is a new, specially developed lubricant and features a good
corrosion protection during polishing with hydrous diamond polishing media.
It does not leave any lubricating film or other deposits on the prepared surface and thereby
facilitates cleaning.
LU-T001
Lubricant Turquoise 1 l for universal sample preparation
LU-T002
LU-T003
22,50
83,00
10,50
47,00
81,50
Lubricants water-free
LU-CWF001
LU-CWF002
Clear waterfree 1 l New!
Clear waterfree 5 l New!
Diamond lubricants on oil based, water-free
LU-O001
Preparation oil 500 ml
LU-O002
Preparation oil 1 l
LU-O003
Preparation oil 2,5 l
LU-O004
Preparation oil 5 l
Special lubricant water-based for mixing of individual two-in-one suspensions on request.
27,00
95,50
16,50
29,50
65,00
119,00
50
Final polishing suspensions
Silica - suspensions
By the final polishing of certain materials, especially metallic type, silica suspensions have displaced the alumina
suspensions. This is mainly due to the different hardness, because silica has a Vickers hardness of 1100 HV,
Alumina in contrast, approx. 1800 HV. For the polishing of e.g. ceramic materials you prefer usually diamonds.
We have a large range of Silica – suspensions. They are tuned to different tasks for polishing different materials.
 Different grain structures
 Grain size distributions of 0.2 µm to 0.050 µm (200 - 50 nm)
 A unique system to prevent the crystallization
 Water-free suspensions
Silica - suspensions were originally developed for the polishing of silicon wafers. The mode of operation of this
silica-suspension is chemically-mechanically. The sample surface will be etched; the resulting coating is removed
with the soft silica, leaving the surface almost free of deformation. Just as in wafer polishing, this is best achieved
when the suspension is added just before use an oxidizing agent. Often you use hydrogen peroxide or acids /
bases in combination with a salt. You take an etching agent which is often used simultaneously with the etching
of the finished object. The oxidation- or etching agent must be added just before use, because it can trigger
changes in the silica-suspension such flocculation or coagulation.
Crystallization
One problem of the Silica-suspensions is the crystal precipitation after the application. If the liquid of the
suspension evaporated after the final preparation, the Silica-content concentrates. Thus there is a precipitation of
crystals that cannot be resolved by the addition of a new suspension. The crystals are embedded in the polishing
cloth, which can no longer be used.
We have developed a very effective method to stop the crystal precipitation. This method reduces the water
evaporation, and with our Colloidal silica it is other than before possible to dissolve the precipitated crystals once
again. Thus extends the lifetime of the polishing cloth!
Price €
OxyPol001
OxyPol002
OxyPol005
OxyPol006
OxyPol007
OxyPol008
OxyPol009
OxyPol010
Colloidal Silica Suspension 50 nm Alkaline 1 l
Colloidal Silica Suspension 50 nm Alkaline 5 l
Fumed Silica Suspension 0,12 µm Alkaline 1 l
Fumed Silica Suspension 0,2 µm Water-free 1 l
Fumed Silica Suspension 0,2 µm Water-free 5 l
36,00
148,00
29,00
115,00
29,00
115,00
56,00
220,00
Alumina suspensions
Alumina suspension (aluminium oxide suspension, pH-value: neutral)
TONPOL001
TONPOL002
TONPOL003
Alumina Suspension grain size 1,00 µm
1 kg
1 kg
1 kg
OxyPol011 Aluminum oxide polishing agents for metallic and nonmetallic materials
such as synthetics, 1 µm, pH: 3.4 1l
OxyPol012 Aluminum oxide polishing agents for metallic and nonmetallic materials
such as synthetics, 1 µm, pH: 3.4
5l
Larger quantities on request!
33,50
55,00
79,50
42,00
180,00
51
Mobile Materialography
Price €
MobMat008
Power Lock Disc Set
Set consisting of:
1 piece adapter plate for Power Discs,
10 pieces Power Lock Disc plastic adapter
5 pieces Power Lock Discs K 80, Ø 38 mm
5 pieces Power Lock Discs K 180, Ø 38 mm
5 pieces Power Lock Discs Fine grinding fleece, Ø 38 mm
5 pieces Power Lock Discs Pre-polishing fleece, Ø 50 mm
25 pieces Power Lock Disc PT Nap, Ø 30 mm
and pieces 25 Power Lock Disc PT Silk, Ø 30 mm
95,50
MobMat001
Adapter plate for Power Lock Discs
Adapter plate for problem free and rapid changing
of grinding and polishing discs
Shaft diameter 6 mm
21,50
Other shaft diameter on request!
MobMat002
Grinding disc for Power Lock Disc K 80
5 pieces
Zircon corundum grinding disc on fiber- and/or tissue carrier
in grain size of 80 Ø 38 mm
7,70
MobMat003
Grinding disc for Power Lock Disc K 180 5 pieces
Zircon corundum grinding disc on fiber- and/or tissue carrier
in grain size of 180 Ø 38 mm
7,70
Grinding bloom for optimal grinding of radii and fillets on welded
components
MobMat038
Grinding bloom for Power Lock Disc K 60
5 pieces
Corundum grinding wheel on fiber respectively fabric carrier
in grain size 60 Ø 55 mm
9,80
MobMat039
5 pieces
9,80
MobMat040
5 pieces
9,80
MobMat041
5 pieces
9,80
52
Sic- wet grinding paper for the mobile component examination
MobMat029
grain size
80, 196 µm
MobMat017
MobMat018
MobMat019
MobMat030
MobMat020
Ø 30 mm, self-adhesive, VE 100 sheet
MobMat031
MobMat021
MobMat032
MobMat022
Optimal use with plastic adapter or rubber plate
MobMat004
Power Lock Disc Fine grinding fleece, 5 pieces
Price €
24,00
23,50
23,00
23,00
23,00
23,00
23,00
23,00
23,00
23,00
9,80
Grinding disc from pressed grinding fleece for the fine grinding stage, Ø 38 mm
MobMat005
Power Lock Disc Pre-polishing fleece, 5 pieces
34,50
Grinding disc from pressed grinding fleece for the pre-polishing stage, Ø 50 mm
MobMat007
Power Lock Disc PT Silk 25 pieces
17,00
Polishing cloth for the polishing with 3 µm diamond products, Ø 30 mm
MobMat014
Power Lock Disc PT Mol 25 pieces
17,00
Polishing cloth for the polishing with 6 µm or 3 µm diamond products, Ø 30mm
MobMat006
Power Lock Disc PT Nap 25 pieces
17,00
Polishing cloth for Final polishing with 1 µm diamond products, Ø 30 mm
MobMat037
Power Lock Disc PT Filz 25 pieces
17,00
Polishing cloth for Final polishing with 1 µm diamond products, Ø 30 mm
Other polishing cloths on request!
MobMat024
Power Lock Disc plastic adapter 10 pieces
22,00
Plastic adapter disc with thread for absorption of self-adhesive SiC Paper
or polishing cloths, Ø 30 mm
GOT010
Glass slides
50 pieces
4,50
Glass slide for the fixing of reprint foils
with 20 mm matt-edge for markings
Size: 76 x 26 x 1 mm
MobMat026
Transport / Storage containers for glass slide
11,90
Suitable for the storage and transport of up to10 glass slides.
Stable construction, screw cap with nipple for sealing.
With the opened cap the glass slides jut out about 10 mm
allowing easy withdrawal.
MobMat027
Storage container for glass slide
Suitable for the storage of 100 glass slides.
- Of high-quality polystyrene
- With numbering in the base
- Stackable
- Dust proof
17,00
53
Mobile Component-Microscope
The TKM is a microscope for ambulatory (portable) Metallography. It is mainly intended for the on-site viewing
and recording of metallographic cuts of large parts (for example in foundries) and outdoor facilities (power plants,
chemical plants, etc.) as well as for macro examinations (visual on-site inspection).
TKM has an autonomous LED lighting that can also be used coaxial (picture left) as well as sidewise. The LED
lights are powered by a rechargeable battery box or operated wirelessly with batteries. The rechargeable battery
box ensures operation for several hours. A digital camera serves for documentation and saves for example the
production of reprint foils.
TKM-S Transportable Metallographic Microscope TKM Standard
- Stand: round foot, straight lens tube
- Incident light - objective 10X, planachromatic (100X)
- WF-ocular 10X
- 2 LED lights, white, with button cells (wireless)
- Illumination coaxial / oblique
- In form-foamed transport case
- Photo-ocular plan-compensated
- Digital Camera for TKM
Possible magnifications with optional components:
Incident light-objective 4x planachromatic (40X + 80X)
Incident light-objective 20x planachromatic (200X + 400X)
TKM001
All round price 3.330,00 EUR
Further microscopes and accessories as well as machines for mobile cut
production on request
Surfaces – reprint mass
Reprint 1000
Reprint 1000 is a high-viscous mould material made from additional cross-linked vinyl silicones. It is especially
suitable for the non-destructive analyses of microstructures and three dimensional structures such as for
example fracture surfaces
Reprint 1000 shows good hydrophilic qualities which improve wetting ability and mould accuracy.
Reprint 1000 - Cartouche and a mixing spout are loaded onto the mixing pistol. The mixing pistol applies the
reprint mass uniformly onto the spot to be examined. Since the reprint mass consists of quick hardening twocomponent-silicone the print can be dissolved after approx. 3-4 minutes and evaluated immediately.
Technical Data:
Temperature range: - 15 to + 250 ° C
Resolution: up to 0.1 µm
Contraction after 24 hrs: less than 0.1 %
Deformation under pressure: 1.7 %
Practical examples: Macro and micro investigations
54
Price €
122,50
MobMat009
Reprint 1000 Set
Set consisting of:
1 Mixing pistol
2 Cartouches à 50 ml Reprint 1000
Colour blue
30 Mixing spouts
30 Top Piece spouts
MobMat010
Reprint 1000
Universally usable 2-component-silicone reprint mass
for the investigation of micro- and three dimensional structures,
colour blue, 1 Cartouche à 50 ml
21,50
MobMat013
Mixing pistol
Mixing pistol for Reprint 1000 (50 ml cartouches)
49,00
MobMat011
Mixing spout 30 pieces
Mixing spout for Reprint 1000
18,00
MobMat012
Top Piece 30 pieces
Top Piece for mixing spout
21,50
Reprint 2000
Reprint 2000 is a ductile, additional cross-linked high-precision reprint material on vinyl-polysiloxane base.
Reprint 2000 is particularly well suited to form of larger components contours, fracture surfaces or similar. From
the resulting negative-print you can easily produce a positive by casting a suitable cold embedding agent. Thus,
in the area of damage events replicas are prepared easily for archiving, examination or other documentation.
Technical Data:
Resolution: up to 0.1 µm
Recommended time for outpouring: after 1 hour to 14 days!
Linear dimensional change: - 0.15%
Shelf life at 23°C - 25°C, relative humidity: up to a maximum of 2 years
MobMat028
Reprint 2000
Ductile, additional cross-linked high-precision reprint material on
vinyl polysiloxane base. For the production of 3D- surface reprints
with excellent surface reproduction, colour terracotta.
1 x 450 ml (690 g) of basis mass and 1 x 450 ml (690 g) hardening mass
67,00
Reprint 3000 D
MobMat033
Reprint 3000 D
Light-curing, low viscosity reprint mass for surface reprints
(such as structure reprints), curing with UV-LED lamp , in a spray 3 g
each, including 5 application cannulas
12,80
MobMat034
Reprint 3000 D Set
Consisting of 4 sprays at 3 g, 20 application cannulas, 50 pieces
glass slide, 1 UV-LED lamp with 21 LEDs with batteries and
a practical transport box
105,00
MobMat035
UV-LED-lamp with 21 LEDs including batteries for the curing of
Reprint 3000 D
37,00
55
Reprint foils
Reprint foil for mobile component examination
MobMat015
MobMat016
MobMat036
Acetate foil 30 µm
Acetate foil 95 µm
Acetate foil 95 µm
100 x 150 mm
125 x 125 mm
100 x 150 mm
Price €/PU
32,50
32,50
32,50
20 sheet
20 sheet
20 sheet
Fixing assistances SFZ
The fixing assistances SFZ allow the planar clamping of acetate foils for an optimal viewing of
microstructures.
Due to the special reflective surface you can save yourself the costly gold steaming and proceed
directly to the microstructure analysis.
Clamped acetate foil on the SFZ
without SFZ
with SFZ
Microstructure-reprint with
acetate foil, clamping on SFZ
SFZ001 Set consisting of:
3 Acetate foils holder SFZ (ABS) in Ø 25 mm, Ø 30 mm und Ø 40 mm
Each 5 replacement mirror foils and 3 rubber rings per diameter
1 VE Acetate foil 95 µm 100 x 150 mm 20 sheet
1 VE Acetate foil 30 µm 100 x 150 mm 20 sheet
159,00
SFZ002 1 Acetate foils holder SFZ (ABS) in Ø 25 mm with 5 replacement mirror foils
and 3 rubber rings
30,00
and 3 rubber rings
40,00
and 3 rubber rings
45,00
56
Etching agents, solvents and rubbing alcohol for mobile component examination
Price €
16,00
ÄtzM024
Adler – Etching
250 ml
e.g. for etching of e.g. Cr-Ni steels and welded joints
ÄtzM025
Kalling II
250 ml
e.g. for etching of e.g. Ni-based alloys and high alloyed steels
16,00
ÄtzM026
3% alcoholic nitric acid
250 ml
e.g. for etching of low alloyed carbon steels
13,00
ÄtzM027
Acetone
inter alia for wetting the triacetate foil
250 ml
10,80
Clean007
Rubbing alcohol
99.9% denatured ethanol
250 ml
4,10
Other etching agents on request!
Small bundles have the advantage that they can be transported safely and facilitate
handling on-site!
Cleanser
Clean001
Clean002
Clean003
Clean004
Clean005
Clean006
Clean008
Clean009
Ethanol denatured
Rubbing alcohol 99 % (Ethanol)
1,0 liter bundle
5,0 liter bundle
10,0 liter bundle
5 x 5 liter bundle
Clean Spray 0,5 l
Clean Refill 5 l
Clean Spray water-free 0,5 l
no dangerous goods, alternative to rubbing alcohol
Clean water-free Refill 5 l
Ultrasonic - Cleaner has been specially developed for cleaning of steel samples for
automatic purity level-determination after polishing on fully automatic grinding and
polishing machines.
Clean010
Ultrasonic – Cleaner 1 l
Clean011
Clean012
9,80
36,00
65,00
153,50
12,50
57,50
12,50
57,50
10,50
47,00
81,50
Zub009
Cleaning cotton wool 200 g
Cotton wool from 100% cotton for grinding cleaning
4,00
Zub010
Cotton wool pads 200 pieces
4,00
57
Etching agents
Price €
ÄtzM001
Adler – Etching
1,0 liter
For etching of e.g. Cr-Ni steels and welded joints
ÄtzM002
ÄtzM003
ÄtzM008
3 % alcoholic nitric acid
1,0 liter
2,5 liter
5,0 liter
25,30
55,50
109,00
ÄtzM004
ÄtzM005
ÄtzM009
1,0 liter
2,5 liter
5,0 liter
29,00
64,00
124,00
ÄtzM006
ÄtzM007
ÄtzM010
5 % hydrous nitric acid
1,0 liter
2,5 liter
5,0 liter
26,30
58,00
112,00
ÄtzM013
Copper ammonium chloride and 100 ml of ammonia
For etching of e.g. Cu und Cu-alloys
34,00 1,0 Liter
ÄtzM023
Etching agent for Al- soldered joints
1,0 liter
For the visualization of soldered joints in Al and Al – alloys
and the microstructure of some aluminum alloys.
Caution: contains Hydrofluoric acid!
38,00
ÄtzM014
V2A Mordant
For etching of e.g. Chrome-nickel steels
1,0 liter
29,00
ÄtzM015
5 % alcoholic picric acid
1,0 liter
For etching of e.g. soft annealed carbon steels
50,50
ÄtzM019
1,0 liter
26,30
ÄtzM029
Primary etching agent by Le Chatelier
1,0 liter
e.g. for the development of the microstructure of steel
40,00
ÄtzM030
Etching agent by Oberhoffer
1,0 liter
For cast iron, steel liquation and stretcher strain marks
29,00
ÄtzM031
15 % sodium hydroxide solution
For aluminum and aluminum alloys macro
1,0 liter
41,00
ÄtzM032
1,0 liter
e.g. for the electrolytic etching for the detection
of ferrite and sigma phase
39,00
ÄtzM033
Etching agent by Fuß
For aluminum and aluminum alloys micro
41,00
ÄtzM034
Kalling II
1,0 liter
e.g. for etching of Ni-base alloys and high alloyed steels
40,00
ÄtzM035
Etching agent by Bechet-Beaujard
1,0 liter
For the visualization of the former austenite grain boundaries
in low alloyed heat treatable steels
37,00
ÄtzM040
Etching agent by Murakami
1,0 liter
Standard etching agent for high-contrast and color differentiation of
austenite, ferrite and sigma phase in e.g. duplex / super duplex steels
39,00
Other etching agents on request!
1,0 liter
34,00
58
Colour etching agents
Price €
ÄtzM016
Beraha II stock solution 1,0 liter and 100 g potassium disulphide
Colour etching agents for e.g. high alloyed steels
52,00
ÄtzM038
Etching agent by Klemm I stock solution 1 liter + 20 g potassium
Color etching agent for visualization of microstructure in unalloyed
and low alloyed steels and cast iron
49,00
ÄtzM039
Etching agent by Klemm II stock solution 1 liter + 50 g potassium
Micro etching agent for copper alloys and soft solder connections
52,00
Electrolytic polishing and etching agents
ÄtzM011
ÄtzM020
ÄtzM021
ÄtzM022
ÄtzM012
ÄtzM032
New!
Electrolyte CT- A2
1,0 liter
Steel, high speed steel, aluminum and aluminum alloys, stainless steel
Electrolyte CT- A3
1,0 liter
Stainless steels, martensitic steels, molybdenum, titanium, zirconium,
vanadium
Electrolyte CT- AC2
1,0 liter
Cast iron, magnesium, magnesium alloys, nickel, Nimonic, carbon steels,
stainless steels, beryllium
Electrolyte CT- D2
1,0 liter
Copper, copper alloys, brass
CT – Barker – Etching agent
1,0 liter
Electrolytic etching of pure Al, Al-Zn-Al-Mn, Al-Mg-Si,
Al-Zn-Mg- and Al-Mn-Mg- alloys
1,0 liter
e.g. for the electrolytic etching for the detection
of ferrite and sigma phase
39,00
Nickel, Zinn, Berylium
50,50
50,50
53,50
53,50
39,00
Other electrolytes on request!
Please note the additional dangerous goods shipping costs for the electrolytes
CT-A2, A3-CT and CT-AC2 in the amount of 22.00 EUR! These items can be shipped
only within Germany.
Etching tongs
The etching tongs are set up so that the etching of round samples does not present a problem. Since the plasticcoated gripping surfaces extent around the sample, slipping is prevented – a problem that occurs with
conventional tongs with straight gripping surfaces. Thus a secure etching is guaranteed.
Old version
Neue
ÄtzZ001 Type A curved wraparound grip surfaces for samples of Ø 25 mm to 30 mm
ÄtzZ002 Type B curved wraparound grip surfaces for samples of Ø 30 mm to 40 mm
ÄtzZ003 Type C curved wraparound grip surfaces for samples of Ø 50 mm to 70 mm
New version!
28,00
29,00
30,00
Etching bowls
ÄtzS001
Etching bowl, plastic, with screw cap, approx. Ø 100 mm,
and 50 mm high. Inside Ø 90 x 45 mm
9,60
59
Accessories
Price €/PU
Measuring bottles with spray top for diamond suspensions and lubricants
DFL005
DFL006
DFL003
DFL004
Measuring bottles 250 ml 1 piece
Measuring bottles 250 ml 3 pieces
Measuring bottles 500 ml 1 piece
Measuring bottles 500 ml 3 pieces
3,50
9,00
4,00
10,00
Zub004
Latex gloves powder-free size L 100 pieces
Single use latex gloves, powder-free
8,60
Zub003
Latex gloves powder-free size M 100 pieces
8,60
Zub005
Latex gloves powder-free size S 100 pieces
8,60
Zub016
Nitrile gloves size L 100 pieces
Single use Nitrile gloves
11,80
Zub017
Nitrile gloves size M 100 pieces
11,80
Zub018
Nitrile gloves size S 100 pieces
11,80
Price €
HSK001
Adhesive spray can 400 ml
Adhesive spray for attaching non self-adhesive SiC-Paper onto adapter
discs, very easy to use and disposal of adhesive residues without solvent
possible
22,80
Lac001
Protective lacquer spray can 400 ml
Protective lacquer for spraying onto ready-prepared materialographic
samples, easy analysis by microscopy, removable with acetone
25,00
New: Disc-storage-box for storage of new and used polishing wheels, SiC paper and grinding
wheels for Ø 200 mm und Ø 250 mm see page 40
Embedding accessories (New: paraffin for vacuum infiltration) see page 24 and 25
Target Preparation - TargetStop
TS001
TargetStop 40
Hand specimen holder for target preparation for specimens Ø 40 mm
535,00
60
Microscopy and Digital image processing
Reflected light industry microscope with digital photo
documentation
A very reasonable and powerful reflected light microscope for industrial laboratory, combined
with a fast and professional digital photo documentation and image measurement! This is
more than a wish. Finally we have a suitable system for this application.
Bright- and dark field reflected light microscope MEIJI MT 7530FLED
with digital camera Jenoptik GRYPHAX SUPRA, including panoramaimage-sharpness-reconstruction and image measurement - in live mode
Reflected light microscope MEIJI MT 7530F










5-way objective revolver
Trinotubus 80/20 switchable and oculars 10x/22
C-mount adapter
3-plate cross table, no object guide required
Sample height up to 50mm (!)
Strong LED Köhler-illumination with field- and aperture diaphragm
Bright and dark field
Polarization accessories.
High quality Plan EPI objectives 5x, 10x, 20x and 50x and 100x
Dust cover
Digital camera Jenoptik Gryphax Subra*
 Resolution 2,0 mega pixels
 CCD 2/3“ CMOS sensor
 Pixel size 5,5x5,5µm
 C-mount connection
 USB 3.0 interface
Image Processing *
 Image montage (panoramic image) in Live mode
 Z-stack (sharpening reconstruction) in Live mode
 Image Processing in Live mode
 calibration scale
 Image caption
* for adaptation at existing computer
Price €
MT7530FLED
Complete offer
Includes installation and instruction (inside Germany)
11.950,00 €
Further products on request
Microtomes
Macroskopes
Stereo Microskopes
Inverse Industrial Microskopes
61
Microscopic accessories
Price €
ZubSP001
Grinding-press for flat on-luting of materialographic
samples
247,00
Zub012
Metal glass slide for flat on-luting of materialographic samples
76 x 26 x 2 mm, black anodized aluminum, 5 pieces
51,00
Zub011
Plasticine for fixation of materialographic samples on
metal glass slides 1kg
10,30
Microscope - Cleaning Accessories
MRS001
Cleaning set for microscopes and optical equipment
28,00
Zub019
Josef-Papier, 1000 sheet, protection-paper for materialographic cuts
15,00
Fixing assistances
Fixing assistances for planar putty of materialographic samples
The fixing assistance RSP allows the planar putty of materialographic samples without any interference of the
prepared surface.
The fixing assistance RSP is made of colored anodized aluminum and is set on the metallographic specimen,to
have no contact to the embedded sample. Thus, the prepared specimen can be easily puttying plan.
RSP001
Set consisting of:
1 x Grinding press
1 VE Metal microscope slide 5 pieces (dim. 76 x 26 x 2 mm)
1 VE Plasticine 1 kg
Each 1 ring in Ø 30 mm, Ø 40 mm und Ø 50 mm
370,00
RSP002
Ring for Grinding press Ø 30 mm
made of anodized aluminum, color gold 1 piece
30,00
RSP003
made of anodized aluminum, color green 1 piece
34,00
RSP004
made of anodized aluminum, color blue 1 piece
35,00
RSP005
Fixing assistances - Set
Ring for Grinding press Ø 30 mm, Ø 40 mm and Ø 50 mm
made of anodized aluminum, color gold, green and blue
96,00
62
Wifi – Mikroskop-Kamera
Neue 5 MP Digital-Kamera für
die Makro– und Mikrobilddokumentation
Einsatzgebiete:
Zubehör:
 mobile Bauteilmaterialographie
 Stereomikroskopie
 Allgemeine Mikroskopie
 Smartphone Halterung
 Adapter für Okulareinschub
 Schraubgewinde für c-mount Adapter














Sensor Type:
CMOS
Sensorgröße:
1/2.5"
Auflösung:
5 MP Sensorgröße 5,70mm x 4,28mm, Diagonale 7,13mm
Standbilder (Max): 10 fps 2592 x 1944
30 fps 1280 x 960; 1280 x 720; 1024 x 768; 800 x 600; 640 x
480
WiFi-Auflösung:
5 fps 2592 x 1944
25 fps 1280 x 960; 1280 x 720; 1024 x 768;
30 fps 800 x 600; 640 x 480
Pixelgröße:
2.2 x 2.2 µm
Datentransfer:
WiFi
Gewinde an der Kamera: CS-Mount
Aufladbarer eingebauter Akku: 4500mAh
Betriebsdauer bis zu 8 Stunden
Aufladen des Akku über PC mit USB oder 2A Netzadapter
Lieferumfang:
Netzteil, Kalibrierungsmaßstab, USB Kabel, verschiedene Okular-Adapter
i-Phone Halterung, div. Zubehör
950,00 EUR
63
pixel-fox®
pixel-fox® ist das clevere Imaging-Paket mit digitaler Mikroskopkamera und
Software – zum Aufnehmen, Vermessen, Speichern und Dokumentieren von
Bildern.
1.690,00 €
Art.-Nr.: 650DHS -00005
Leistungsumfang:
 Aufnahme-Software zur Kamera-Parametrierung
o
Belichtungszeit, Farbsättigung, Weißabgleich, Shadingkorrektur, Spiegeln u.a.m.
o
Bilder als *.jpg, *.bmp, *.png und *. pixel-fox-Format ab speicherbar
o
Zwischengespeichertes Bild incl. Annotationen über Windows™ -Zwischenablage
in andere Anwendungen kopierbar
 Software zum 2D-Vermessen von
o
Kreise, Winkel, Strecken, Fläche und Umfang, Lot fällen
o
Maßstabbalken und Fadenkreuzeinblendung in verschiedenen Darstellungen, Online Messwert Vorschau, Digitalzoom und digitale Lupe, Lineal Einblendung und Einfügen von
Pfeilen und Texten
o
o
„Fangen“ von Messpunkten
Abspeichern von „Arbeitssitzungen“
 Dokumentation
o
Berichtserstellung über MS Excel
Lieferumfang:




4,92 MPix Digitalkamera (1/2“-Sensor) mit C-Mount-Gewinde
USB 3.0-Kabel zum Anschluss an den PC
Bildaufnahme und -vermessung (incl. Kalibrier-Maßstab)
USB Dongle zur Lizensierung, USB Software-Stick
Digital image processing dhs-system on request
64
Consumables and accessories for microtomy
Embedding of specimens
Embedding materials see page 14 to 25
Price €/5 pcs
Embedding moulds round specimens
DS-EF001
9-fold embedding mould 25 mm and 6x8 mm
trapezoidal
DS-EF002
9-fold embedding mould 25 mm and 2x15 mm
trapezoidal
DS-EF003
9-fold embedding mould 25 mm and
13x19 mm trapezoidal
20,00
20,00
20,00
Price €/25 pcs
Specimen adapter
DS-PA001
Specimen adapter for DS-EF001/002/003
48,00
Price €/piece
Embedding moulds rectangle
DS-EF004
Teflon E. mould with 10 hollows
(WxHxD) 10x16x6,5 mm
380,00
DS-PA002
Specimen adapter for MK64708991K,
50 pieces
36,00
DS-EF005
New: Embedding mould
Block size 17 x 25 x 20 mm
14,00
Holding of specimens
Price €/piece
Sandwich holder
DS-SH001 White plastic small plates (PS), for supporting of foils,
for direct adaptation to the microtome, about 20 x 10 x 1.5 mm
pack of 50 pieces
DS-SH002 Clear plastic small plates (PS), for supporting of foils,
for direct adaptation to the microtome, about 20 x 10 x 1.5 mm
pack of 50 pieces
Microtome span clamp II
DS-FSK001 Foils span clamp (39x39x15 mm) for fixing
flat samples up to max 20x.10 mm, suitable
for all microtome. Clamp with clamping jaws,
guide rails and central bore hole,
guide slot for inserting the foil,
spacer (5mm), base-plate (1.5 mm),
10x sandwich holder (MK9997), allen 2,5x
Microtome span clamp (Cryostates) III
DS-FSK002 Foils span clamp (39x39x15 mm) with pin
9x20 mm (please specify other diameters)
for all microtome. Clamp with clamping jaws
and guide rails
base plate (1.5 mm),
10 x Sandwich holder (MK9997), allen 2,5x
45,00
39,00
259,00
275,00
65
Reducing of cuts
Price €/piece
Knifes
DS-WZ001
DS-WZ002
16 cm knife, cut D,
for softer plastics
16 cm knife, cut D hard metal,
for harder plastics
Disposable blades
DS-WZ003
Disposable blades for softer plastics,
Dispenser 50 pieces
DS-WZ004
Disposable blades hard metal, for hard plastics,
1 piece
255,00
1.300,00
98,00
220,00
Price €/PU
Cut reduction foil
DS-SAF001
Polarization-poor and clear adhesive foil for direct
cut reduction, sheet: 21 x 14,8 cm, 10 sheet
DS-SAF002
20 sheet
DS-SAF003
50 sheet
DS-SAF004
100 sheet
18,00
32,00
70,00
124,00
Price €/piece
Precision scissors (surgical tool)
DS-WZ005
Scissors pointed-pointed, ideal for the artifactfree cutting of the samples and reduction foils
Tweezers-blade
DS-WZ006
(surgical tool)
Tweezers with flat 3.5 mm blade
for non-destructive cut reduction
of flat preparations
Tweezers-pointed-straight (surgical tool)
DS-WZ007
particularly fine polished straight tip
of small samples
Tweezers-pointed-curved (surgical tool)
DS-WZ008
particularly fine polished curved tip
of small samples
Scalpel
DS-WZ009
Disposable scalpels with stainless steel blade, Type 23
Plastic handle, individually packed, pack of 10 pieces
Preparation needle
DS-WZ010
with fine polished tip
for working at the cut-guide
Brush Set
DS-WZ011
Brush Set made of five high-quality hair brushes
pointed (Gr.1) to wide (Gr.16) for cleaning
(Preparing and reducing of cuts)
22,00
39,00
33,00
42,00
20,00
3,00
9,00
66
Mounting of cuts
Price €/PU
Glass slides
GOT011
GOT010
Glass slides 76x26 mm, cut edges,
without matted edge, 50 pieces
Glass slides 76x26 mm, cut edges,
with matted edge for marking, 50 pieces
2,50
4,50
Price/piece
Marking pens
ZubDS006
ZubDS001
for marking of matted-edges of glass slides
Diamond pen
for marking of glass slides without matted-edges
4,50
98,00
Covering up of cuts
Covering media
DS-EM002
for covering of objects, xylene-containing,
hardened, bottle of 250 ml
20,00
DS-EM001
for covering of objects, xylene-free,
hardened, bottle of 100 ml
23,00
DS-EM003
Canada balsam for covering of objects
bottle of 25 ml
77,00
DS-EM004
Cedar wood oil for covering of objects
bottle of 100 ml
64,00
DS-EM005
Immersion oil for covering of objects
bottle of 100 ml
49,00
ZubDS007
Metering vessel for covering media, with
grinded on cap and rod, 30 ml
19,00
ZubDS009
Stirring Rods for application of covering medium
8,00
Price €/PU
Cover glasses
GOTDG004
Cover glasses 18x18 mm, 100 pieces
2,00
GOTDG003
3,00
GOTDG001
4,50
GOTDG005
5,50
ZubDS008
New: Weights for pressing on glass slides
2 pieces
31,00
67
Keeping of cuts
ZubDS010
Preparations box
for glass slides 76x26 mm, box
with holder for 100 carrier
ZubDS011
Shipping container for glass slides 76x26 mm
with holder for 5 carrier, package 5 pieces
Price €/piece
33,00
10,00
Cleanser
ZubDS012
Cleaning wipes for sensitive
surfaces, low linting, box with 100 wipes
29,00
ZubDS013
Compressed air spray for non-contact
cleaning of dirt and cutting residues
15,00
Microtome-accessories
Microtome lighting
MKCL-31OP
New: LED spot lighting
with flexible 600 mm holding arm
and pedestal, brightness control
Target preparation
Ziel002 Side viewing device for the targeted preparation of blowholes, gel specks, and
other artifacts in cross section
Working principle
In this zoom-system the magnification is set beyond the working
distance. You can reach with 150 mm a factor of 2.0x,
with 50 mm 9,0x,(5 " monitor).
The integrated CMOS sensor (720x576 pixels) transfers
Live image on a 5 "LCD monitor. The tripod with flexible arm allows
quick and easy positioning.
Zoom optic with CMOS camera, AA: 50-150mm, VV: 2.0x-9,0x
Integrated lighting (8 LEDs). Universal tripod with flexible arm
(300mm) for precise positioning.
5 "LCD monitor with Flex-arm-holder (300mm)
295,00
998,00
68
Thin Section-Set
For the manual preparation of thin sections you can use your existing devices-equipment. You only need
a few accessories materials. We have put together a starter kit for you.
Just try it!
Price €/Set
ItemNo.:DS-Set001
Thin Section-Set
Embedding material, Epoxy006, Epoxy 2000, 2-component cold embedding material for
low splitting & shrinkage, 1000 g
(89,00 €)
Embedding mould, KEF020, round 25 mm, transparent, package, 3 pieces
(7,40 €)
Adhesive, ZubDS002, for fixing the samples on glass slides, 20 ml
(19,00 €)
Glass slide, GOT004, 48x28 mm, 1,5-1,6 mm, ground edges, one-side matted (OTGM)
package 50 pieces
(23,50 €)
New: SiC – precision cutting discs, Pcut011, for the separation of plastic composites,
Ø 150 x 0,5 mm x 12,7 mm, package of 5 pieces
(65,00 €)
Weights, ZubDS008, for the pressing of the samples on the slide or on the cover glass,
2 pieces each 50 g
(31,00 €)
New: Thin Section-Holder, ZubDS004, for clamping the bonded sample into a cutting
machine, including Adhesive Foil, GF002
(198,00 €)
Thin Section-Holder, ZubDS003, for glass slide 48x28 mm, aluminum casting, 100 g
(159,00 €)
Cover glasses, GOTDG001, 24x40 mm, package 100 pieces
(4,50 €)
628,00
69
Embedding material, DS-EM001, for covering the cuts with the cover glass, Xylene-free,
100ml
(23,00 €)
New: Thin Section-Holder, ZubDS005, for glass slide 76 x 26 mm onto 48 x 28 mm
(59,00 €)
Storage box, Zub013, wood model for the safe storage of 50 glass slides
(19,50 €)
our offer: 628.- €
List price 697,90 €
Of course, you will receive all the items individually!
Including: Detailed instructions for manual thin section productions
We recommend our training:
Preparation procedures for non-metallic materials
CfK, Transmitted Light
CfK, Transmitted Light
Cast Iron
Lacquer Layers,
Polarization, Lambda,
Polarization, Lambda,
Weathering, Brightfield
Transmitted Light,
mineralized Intercalation
Diameter
Polarization
70
Glass slides for thin section production
Glass slides of the dimensions of 48x28mm, also known as "Giessener Format", are used
traditionally for thin section preparation. Today's mainly mechanical production makes in this
connection high demands on the glass slides:
 Low-stress glass to prevent breakage of glass
 Glass thickness > 1.5 mm also to prevent breakage of glass
 Constant thickness of the glass with low tolerances (± 0, 05mm)
for low removal (time and cost) for plane grinding
 Ground edges (90 °) to prevent injuries and outbreaks
In cooperation with the traditional company W. Knittel Glass Processing GmbH, as a manufacturer of various
standard- and special glass slides as well as many users, we have developed a product that will meet the stated
requirements.
Glass slide 48x28mm, 1.5-1.6mm, package 50 pieces
GOT001
Cut edges, clear (OT)
GOT002
Cut edges, one-side matted (OTM)
GOT003
Ground edges, clear (OTG)
GOT004
Ground edges, one-side matted (OTGM)
Price €/PU
14,20
18,30
19,80
23,50
Quantity discounts: > 10 packages: 10%, > 15 packs: 15%, > 20 packs: 20%
Cover glasses
GOTDG001
Cover glasses 24x40 mm, package 100 pieces
Storage boxes for glass slides 48x28 mm
Zub013
Wooden box for 50 glass slides
Zub014
Wooden box for 100 glass slides
4,50
Price €/piece
19,50
26,00
For large-format cuts we offer you the same quality:
Glass slide 50x50 mm, 1.5-1.6 mm, package 50 pieces
GOT005
GOT008
Cut edges, one-side matted (OTM)
GOT006
Ground edges, clear (OTG)
Cover glasses
GOTDG002
Cover glasses 50x50 mm, package 100 pcs
Price €/PU
15,00
19,50
20,30
25,90
Price €/PU
Glass slide 75x100 mm, 1.5-1.6 mm, package 50 pieces
GOT007
33,20
Quantity discounts: > 5 packs: 5%, > 10 packs: 10%, > 15 packs: 15%
Further accessories
ZubDS001
ZubDS002
ZubDS003
ZubDS004
Marking pen, diamond
Adhesive for fixing the samples on glass slides, 20ml
Glass slide holder for manual thin section production
New: Glass slide holder for clamping into the cutting machine
ZubDS005
ZubDS014
New: Glass slide holder for 76 x 26 mm onto 48 x 28 mm
New: Cryo-Spray can 200 ml CFC and HFC-free cooling spray
For reducing of cuts of very soft samples
Price €/piece
98,00
19,00
159,00
198,00
59,00
18,00
71
Literature
Price €/piece
Text book "Materialographische Präparationstechniken" by Heinz-Hubert Cloeren
Item No.: BU001
70,09
German language
224 pages with over 400 images, in full color,
Size: 17x 24 cm
ISBN: 978-3-9816824-0-3
Verlag:
CTV Heinz-Hubert Cloeren
Püttstraße 23
D-41372 Niederkrüchten
Beobachtende und messende Mikroskopie in der Materialkunde by Martin Kern
Item No.: BU003
ISBN 978-3-9809848-6-7
M.Kern, J.Trempler,
55,98
Brünne Verlag, 2006
Die Top 40 Fragen rund um die Mikroskopie
Item No.:BU002
ISBN 978-3-9816824-9-6
M.Kern,
CTV-Heinz-Hubert Cloeren Verlag, 2014
12,10
72
Preparation Examples
Preparation parameters are based on 40 mm samples in single contact pressure
Base
S/P - medium
Grain size
Lubricant
Rotation
Pressure
Time
Base
S/P - medium
Grain size
Lubricant
Rotation
Pressure
Time
Grinding
Fine grinding
Polish. I
Polish. II
CT DiaGrit
Diamond
120
Water
300
30 N
to plane
CT GriFin 9
DiaTwin
9 µm
--150
30 N
3 Minutes
PT Silk
DiaTwin
3 µm
--150
25 – 30 N
3 Minutes
PT Nap
DiaTwin
1 µm
--150
20 N
2 Minutes
Grinding
Fine grinding
Polish. I
Polish.
II
GeccoFix
CT GriFin Soft 9
PT Silk*
PT Chem
SiC-Paper
DiaTwin Max M
DiaTwin Max M
OxyPol
320
9 µm
3 µm
50 nm
Water
LB Blue
LB Blue
---
300
150
150
150
30 N
30 N
25 – 30 N
to plane
3 Minutes
3 Minutes
15 N
2
Minutes
For example: steel generally,
heat treatable steels, tool steels,
high speed steel
For example: gray cast iron, Al and
Al-alloy, Cu and Cu-alloy, nickelbased materials
* For large sample cross-sections and without edge sharpness can also be used PT Mol
Grinding
Base
S/P - medium
Grain size
Lubricant
Rotation
Pressure
Time
Fine grinding
Polish. I
Polish. II
GeccoFix
GeccoFix
PT Seda
PT Chem
SiC-Paper
SiC- Paper
DiaSusp. P
OxyPol
320/1000
2500
3 µm
50 nm
Water
Water
LB Green
---
300
150
150
150
30 N
30 N
25 – 30 N
15 N
to plane
1 Minute
3 Minutes
2 Minutes
For example: composite materials
like carbon fiber, fiberglass or
electronic components
Our application lab develops for you preparation parameters free of charge or provides assistance on special
preparation problems. Contact us or make an appointment, either in our application laboratory or at your
business site.
73
Delivery conditions
All orders are handled according to our general business conditions, which you can find in our online Shop, and
are available according to our information. If you require we send you the general business conditions by mail.
Our prices are exclusive of in force value added tax.
If you need a product or a device that is not listed in this price list, please let us know. We will inform you about
earliest delivery, date and price, and submit to you an individual offer.
Shipping and handling charges
In Germany:
Net invoice amount to
Net invoice amount starting
499,99 EUR
500,00 EUR
overall 8,00 EUR
free of shipping costs
Outside Germany:
Charges after expenditure – depending on country and weight of the consignment
Dangerous good surcharge after expenditure.
Desired express deliveries will also be charged after
expenditure.
We don’t charge surcharge for small quantities!
Conditions of payment
Invoices within 10 days less 2% discount or within 30 days net without any discount.
Service invoices (e.g. contract materialography, damage analysis, training) are payable immediately without
deduction.
We have all rights to do price- and product changes without previous announcement.
Similarly, we cannot accept any liability for mistakes.
Please notice our quantity discount rates for various consumables.
This price list is valid starting from the January 01st 2016. Previous price lists lose their validity.
© Cloeren Technology GmbH, v16.01
74
Fax order form for urgent orders round the clock!
In Petersholz 44
41844 Wegberg
Company:
Department:
Name:
Road:
City:
Phone:
Fax:
Order No.:
Customer No:
Date:
Signature:
Hereby we order:
Article No.
Article description
The delivery occurs to the known terms of business.
Quantity
Unit price
75
Our offer
Damage Analysis
Training
Consumables for the sample preparation
Development of new products for the Materialography
Support during the establishment of new labs
Hardware and Software for digital image processing
In Petersholz 44
41844 Wegberg
Phone: +49 (0) 2432 - 8902510
Fax: +49 (0) 2432 - 8902519
[email protected]
www.cloeren.de

Price List 2016 - Cloeren Technology GmbH

Transcription

Similar documents

BMW MOTORRAD RIDE 2012.

band saw blades

KolleKtion 2014 / 2015

Broschüre Koganezawa - Stadtgalerie Saarbrücken

Flowtite - Amiantit

A Complete Line of Products for the Workshop