CryoStar I - Wenk LabTec

CryoStar I
Automatic Cryoscope
CryoStar I is ideal for quickly and reliably measuring the added
water content of milk.
A list of the major characteristics:
Ordering codes:
● Flexible and adaptable: Choose between fixedtime measuring and scanning for plateaus and/or
peaks. All necessary parameters can be easily programmed and of course recorded. Thus the
CryoStar I can be set to all existing (and future)
national and international standards.
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
● Userfriendly: Operation is guided by a menu in the
language of your choice. German, English, French,
Greek, Italian and Spanish are installed permanently. Additional languages may be included.
● Performance: A new cooling system (patent pending) allows for shorter warm-up periods even when
the temperatures are high.
● Speed: The CryoStar I measures up to 40 samples
per hour depending on settings.
7150*
7184
7169*
7165*
7166*
7186
7187
7188
7167*
7151
7174
7175
7168
7159
7155
7156*
CryoStar I
replacement thermistor
cooling liquid, 500 ml
calibration standard A (0,000 °C), 250 ml
calibration standard B (-0,557 °C), 250 ml
calibration standard A (-0,408 °C), 250 ml
calibration standard B (-0,600 °C), 250 ml
calibration standard C (-0,512 °C), 250 ml
sample glasses (50)
thermo printer
pipette
pipette tip
sample holder
12 V power cord
solar power supply unit
software
(The CryoStar I includes all items marked with *)
● Versatility: CryoStar I comes equipped with a parallel port (for a wide range of printers) and a serial
port connecting to a PC. The software is included.
The CryoStar also runs on 12 V power sources
(car batteries, solar generators etc.).
● Easy to use: Being small and light-weight, the
CryoStar I is easy to transport and operate. Test
results (percentage of added water) are automatically displayed and printed out. Automatic calibration. All settings and calibrations are permanently
recorded in a non-volatile memory.
Technical specifications:
Power supply:
Resolution:
Range of
measurement:
Through-put:
Sample volume:
Ports:
Size:
Weight:
230 V/115 Volts AC (50…60 Hz)
180 W 12 Volts DC
0,0001 °C
0,000 °C to -1.000 °C
up to 40 samples per hour (normally 30 samples per hour)
2.0 ml bis 2.5 ml (normally 2.2 ml)
1 parallel port, 1 x serial port
(RS 232), 6 Volt supply for
thermoprinter (to order:
item # 7151)
29 x 19 x 38 cm (width/hight/
depth)hight of measuring head
24 cm high
12 kilograms (net weight)
Funke – Dr. N. Gerber
Labortechnik GmbH
Ringstraße 42
D-12105 Berlin · Germany
Fon: (+49-30) 702 006-0
Fax: (+49-30) 702 006-66
Fuse
12 V DC
230 V/115 V AC
Power switch
6 V port for thermo printer
parallel port
serial port (RS 232)