Jeep Urban Twin Stroller

Jeep® Urban Rider
Twin Stroller
Instructions
byby
WARNING
Please take a moment to read through these instructions
before you use your Jeep® Urban Rider Twin Stroller.
Important Safety Information:
WARNING:
• Follow the manufacturer’s instructions.
• Put on all the brakes whenever you park the stroller.
• Do Not leave children unattended.
• Do Not carry extra children or bags on this stroller.
• Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
• Do Not use accessories other than those approved by manufacturer.
• To prevent choking hazard, remove and discard all packing material
before using this product.
• Always use restraint system to keep child from standing up or
falling out of the stroller. Use the harness at all times.
• Always balance the weight of the stroller evenly.
• Always lock the stroller before allowing your child in or near the
stroller.
• Only use this stroller with a child weighing less than 18kg .per seat.
• Never use this stroller on stairways or escalators.
• Do not allow children to stand on seat or sit on footrest.
• This is not an exercise stroller. Do not use product while running,
jogging or participating in other athletic activities.
• Do not put child in basket.
The stroller should not be used near an open fire or exposed flame.
• Do not put more than 2kg in each basket.
3
2
PARTS LIST
Rear
RearWheels
Wheels (x3)
Stroller
Stroller
Canopy
Canopy
Front
Front Wheels
Wheels (x3)
HOW TO ASSEMBLE YOUR STROLLER
Toopen
Open
Stroller
To
Stroller
1
1.
Release the two lock clips
on both sides of the stroller.
2
2.
Push the front of the
stroller downward.
3.
Press down the folding
bars to lock stroller.
3
4
To To
Assemble
Front Wheels
Assemble
Front
Wheels
1.
1
Push the front wheel
onto the stroller leg until it
snaps into place.
Repeat for the other 2 front
wheels.Tug
on each
wheel assembly to be
sure the wheels are
securely in place.
ToTo
Assemble
Rear Wheels
Assemble
Rear
Wheels
1
1.
Push the rear wheels onto
the rear leg tubes until
they click into place.
Tug the wheels
to
make sure the wheels are
securely in place.
5
To To
Assemble
Canopy
Assemble
Canopy
1.
1a
Align the canopy connector
between the stay tab and
the fabric (1b). Snap
canopy connector onto
the frame. Repeat for the
middle and second side
(1a).
1b
Canopy Connector
Stay Tab
2
2.
To lock canopy open,
push down on the hinge
as shown. Repeat for the
middle and second side.
3
3.
Secure the velcro straps
on both sides of the stroller
and the middle as shown.
6
HOW TO USE YOUR NEW STROLLER
Adjust
Footrest
ToTo
Adjust
Footrest
Adjustable Knuckle Assembly
1
Recline
ToTo
Recline
Seat
1.
Press the two buttons on
each side of the seat. Pull
up to raise the footrest.
Push down to lower the
footrest.
1.
To recline the seat, press
in both buttons on the side
leavers.
Seat
1
Push down to lower the
seat back. Repeat for the
second seat.
Side leavers
2
2.
7
To raise the seat, push up
on the back of the seat.
Operate
ToTo
Operate
BrakesBrakes
1.
1
Push leavers down
to lock. Pull levers
up to unlock.
Unlock
Levers
Operate
Front
ToTo
Operate
Swivel Swivel
Front Wheel
Lock
Lock
Wheel Lock
1
8
1.
Push the latches down on
the front wheels to unlock
and allow the wheels to
swivel.
2.
Push latches up to lock
the wheels in the straight
forward position.
Secure
ToTo
Secure
Child inChild
Stroller in
Stroller
1
2
1.
Place child in stroller.
Hook the shoulder straps
to the waist belt.
2.
To secure, snap each of
the waist belts into the
buckles.
To release press tabs and
pull apart.
3.
3
ToTo
Adjust
StrollerStroller
Strap Height
Adjust
Strap
For a correct
adjust
shoulder straps and waist
band as shown.
Height
Higher Position
1
Lower Position
1.
9
For a secure
the straps
should be at or above the
child’s shoulder. Adjust
the straps to the higher
position as your child
grows.
Stroller
ToTo
FoldFold
Stroller
1
1.
First, close the canopies and
put the two seats in an upright
position. Push the two lock
levers up to unlock.
2
2.
Push down on the second
lock levers.
3
3.
Push handle bars forward
and squeeze stroller
together.
4.
Lock the clips on both sides
of the stroller as shown.
4
10
Care & Maintenance
There are many ways to look after and protect your Jeep® stroller. The
most important is to clean up any spills or food, before it dries on the
fabric.
As the covers are not designed to be easily taken off for washing, (for
safety reasons) the easiest method to clean is, sponge the surfaces
with a mild solution of warm water liquid laundry detergent. Rinse well
with clean sponge and leave to dry out of direct sun.
Sand and Salt water should be rinsed with a hose and wiped dry to
prolong the life of the wheels, axles and other moving parts.
Never use petroleum based lubricants on your stroller, the most
suitable lubricants are silicone based products.
Warranty
Jeep® is a registered trademark of Daimler Chrysler Corporation, and is
used under license by Born With Style. ©Chrysler LLC 2007.
Born With Style warrants this product to be free of defects in materials
and workmanship as follows: For a period of ONE YEAR from the
date of purchase, Born With Style will repair or replace, at its option,
the defective product. This warranty is given in addition to (and not in
substitute for) applicable statutory rights which you may have.
We sincerely thank you for purchasing this Born With Style product.
For further information visit: www.bornwithstyle.com.au
11
Contact Details
No refunds will be given on used product unless assessed by Karlises
as faulty. For all spare parts, repairs or warranty issues, please take
your product back to Toys R Us who will contact Karlisles, the service
agent on your behalf.
For all spare parts, repairs or warranty issues, please contact:
Karlisles
Phone:
1300 308 435
Email:
[email protected]
Web:
www.karlisles.com.au
Replacement parts provided by local distributor due to accidental
damage or misuse will be charged accordingly.
To contact the manufacturer directly:
Born With Style
PO Box 789
Gladesville NSW 1675, Australia
Phone:
1300 855 337 or 02 9816 3837
Email:
[email protected]
Web:
www.bornwithstyle.com.au
This product meets and exceeds Australian Standard
AS/NZS 2088:2000.
Personal Record Card
Born With Style recommends that you keep a record of important
information about your Jeep ® stroller. Please complete the
information in the space provided.
Model Number:
Date of Manufacture:
Date of Purchase:
12