M-2900 Weatherproof Regulator Control Cabinet

Transcription

M-2900 Weatherproof Regulator Control Cabinet
CONTROLS
M-2900 Weatherproof
Regulator Control
Cabinet
•
Rust-Resistant, Stainless Steel Riveted,
Continuous Seam welded design
•
NEMA 4 type enclosure
•
Available in cold rolled steel or stainless steel
•
New GE installations or retrofit
•
Pre-drilled holes on front cover facilitates
nameplate transfer
M‑2900 Regulator Control Cabinet
Construction
• Bodies and doors fabricated from 14/16 gauge steel. Also available in Stainless Steel (304) B7B346.
• Continuously welded seams ground smooth.
•
•
•
•
•
Closed cell neoprene gasket.
External adjustable mounting bracket fits all regulator tank styles.
Stainless steel door hinge.
Enclosure door accommodates regulator nameplate transfer.
External Grounding stud provided.
Finish
• ANSI-70 gray polyester powder inside and out over phosphatized surfaces
• NEMA/EEMAC Types 4,12 & 13
Applications
Designed for use as a direct replacement for General Electric regulator control cabinets. The M-2900 Cabinet
can be configured with the optional support equipment to match the existing control application and environment or supplied completely empty. See the options section for details regarding the optional equipment
available.
Optional Equipment
•
•
•
•
•
•
•
M-6200 Digital Regulator Control
M-2001C Digital Tapchanger Control mounted in a M-2293B Adapter Panel
Input Voltage Cutoff Switch (knife switch)
Input Current Shorting Switch (knife switch)
Potential Correcting Transformer (13 available)
Motor Capacitor
Position Indicator Cable (14 conductor) which includes plunger for CT shorting, available in 4', 8'
or 16' cable lengths
• Position Indicator Cable (17 conductor) which includes internal CT shorting in Molex connector,
available in 4', 8' or 16' cable lengths
• Cabinet Heater/Thermostat
Physical
Size: 21.3" high x 11.12" wide x 8.71" deep (54.1 cm x 28.25 cm x 22.12 cm)
Approximate Weight: 16 lbs, 8 oz ( 7.48 kg)
Approximate Shipping Weight: 24 lbs, (10.89 kg)
Approximate Weight with M‑6200 Digital Regulator: 23 lbs, 8 oz (10.66 kg)
Approximate Weight with M‑2001 Series Digital Tapchanger Control: 27 lbs, 4 oz (12.36 kg)
Approximate Shipping Weight with M‑6200/M-2001C: 36 lbs, (16.33 kg)
–2–
M‑2900 Regulator Control Cabinet
Warranty
The M‑2900 Weatherproof Regulator Control Cabinet is covered by a five year warranty from date of shipment.
Specification subject to change without notice.
0.50
[1.27]
8.21
[20.85]
Ø.438 MOUNTING HOLE
5.56 (2X)
21.30
[54.1]
20.04
[50.9]
MOUNTING
DIMENSION
18.86
[47.9]
Mod.No.
Ser.No.
WARNING
11.12
[28.25]
Figure 1 Dimensions
–3–
.75 X .50 SLOT
M‑2900 Regulator Control Cabinet
Figure 2 M-2900 Cabinet Equipped With Optional M-2001C Digital Tapchanger Control
–4–
M‑2900 Regulator Control Cabinet
Figure 3 M-2900 Cabinet Equipped With Optional M-6200 Digital Regulator Control
–5–
M‑2900 Regulator Control Cabinet
Load Current
Shorting Connector
Figure 4 Load Current Shorting Connector
–6–
M‑2900 Regulator Control Cabinet
This Page Left Intentionally Blank
–7–
© 2009 Beckwith Electric Co. All Rights Reserved.
Printed in USA
800-2900-SP-00MC2 06/11

Similar documents

M-2900A Tapchanger Control Cabinet

M-2900A Tapchanger Control Cabinet Approximate Weight with M‑6200A Digital Voltage Regulator Control:  23 lbs, 8 oz (10.66 kg) Approximate Weight with M‑2001 Series Digital Tapchanger Control:  27 lbs, 4 oz (12.36 kg) Approximate Sh...

More information