Laundry Industry

Solutions for the Washroom
Commercial, Industrial and Hospital Laundry Facilities
Long life
replacement
actuators to
reduce downtime
and increase
productivity
Unload
Transfer
Wash
Dry
Feed
Press
Fold
Sort
LAUND13A
Anywhere in the plant, phd has a solution.
Series CV and
CR Cylinders
- Door opener
- Bag pushing
- Bag dumping
- Jensen switch points
on conveyor
UNLOADING & SORTING
1
WASHING
ML307397 Door Locking
Cylinder
-Lavatec
ML311706 Bag
Stopping Cylinders
-Bag stopping
Series CRS Door
Lock Cylinder
- Braun replacement
(ML307839)
Series CV/SD/SG
Automation Dynamics Bullet Sorter
and Jensen Dirty Sort
2
ML312116 Side
Hydraulic Shot Pin
- Ellis replacement
ML312117 Door Lock
- Lavatec replacement
CONVEYING
3
Series SFP Slide
-Bag closing
WASHING
Series AV Cylinder
-Bag stopping
Jensen replacement
ML310107 Bag
Lifting Cylinder with
Adjustable Center
Trunnion Mount
-Cleanwork transferring
-Jensen Futurail or other
overhead conveying
system replacement
6
7
4
INSPECTION
Series 8400 Gripper
-Major dryer manufacturer, King Spreader gripper
DRYING
ML30868 Slide
- Automatic
towel machine
Series CTS Cylinder
-Major dryer
manufacturer, King Spreader gripper
Series CV Cylinder
-Milnor dryer cool
down door cylinder
ML312114 SFP Slide
- Challenge Dryer
door cylinder
STEAM
5
FOLD & STACK
ML311742 Fold Table
Lift Cylinder
- Table lift
8
ML311514 Gripper
with tooling
-Unloads hanger
and places hanger on
sorting line
PRESS
Series CV & CR Cylinders
- Door opener
- Bag pushing or dumping
- ISO cylinder replacement
Series RL Rotary
- Replaces Bimba rotary
ML312121 Heat Seal Emblem
Machine Cylinder
- Texas Automation
GRD Gripper
-Shop towel picker replacement
Series SFP Slide
- Unipress Triple Buck
Ironer component
- Comp-Air, Origa and
Tolomatic replacement
DUMP VALVES/DRAIN CYLINDERS
ML307675 Drain Cylinder
- Lavatec replacement
ML31696 Drain Cylinder
- Braun replacement for 400/450/600 lb
Open Pocket Washer
ML307798 Drain Cylinder
- Ellis replacement for side load/open pocket
ML312241 Drain Cylinder
- Braun replacement
for 200 lb Pony Washer
ML308223 & ML311559
Drain Cylinder
- Jensen L Tron
replacement
2
ML306780 Drain Cylinder
- Jensen L Tron
replacement
8L LINEN PRESSING
ML311767
Spreading Cylinder
- Drop-in replacement
Jensen towel spreading
machine
- Better seals for
longer life
- Fully field repairable
ML311741 Drain Cylinder
- Washex replacement
ML312115 Drain Cylinder
- Ellis replacement
ML312118 Drain Cylinder
- Milnor replacement
11 DELIVERY
ML312119 Drain Cylinder
- Milnor replacement
ML312043 Drain Cylinder
- Milnor replacement
CONVEYING (CONTINUED)
Series CV Cylinder
- Cleanwork transferring
- Camozzi replacement
Series SFP Shuttle Slide
- Cleanwork transferring to dryers
- Cable cylinder replacement
Series AV2 Cylinder
- FLM rail system bag
diverter system
10 FINAL SORTING
9
SORTING
ML306554 Stopper Cylinder
-Garment diverter
-Bosch 0822010500
-Jensen 60275-802
ML306345 Discharge Cylinder
-Garment diverter from
main overhead conveyor
to batching lines
-Bosch 0822010501
-Jensen 401714-81
ML312123 & ML312124
Discharge Cylinder
-Jensen Metircon
-SMC C85N16-10 & C85N16-50
replacement
ML310223
Diverter Cylinder
-Garment diverter
-Watson replacement
3
DUMP
valves
- drain cylinders
LAVATEC
• Drop-in replacement
• Fully field-repairable making it very economical versus
replacing the unit
• Rod diameter larger than PressMAir unit providing
superior performance
• Same rod thread as OEM cylinder (M18x2.5)
ML307675 Drain Cylinder
- Lavatec replacement
BRAUN
ML311696 Drain Cylinder
- Industry specific corrosion resistant
ML307839 Drain Cylinder
- Stainless
2 DAY
shipping
See page 10.
ML311558 Drain Cylinder
- Internal stroke adjustment
making it possible to change
stroke from 3 - 4 inches as needed
• Open pocket washer/extractor
• 400/450/600 lb load capacity
• Fully field-repairable making it very economical versus
replacing the unit
• Lowest cost of ownership
• Head with 1-14 nose mount thread to replace standard
bushing
• Rod end thread matches (5/8-11)
ML312241 Drain Cylinder
- 200 lb Pony Washer
- 25mm bore 3 in stroke
ELLIS
• Drop-in replacement for Ellis drain cylinder
• Rod threads match (1/2-20)
• Fully field-repairable making it very economical versus
replacing the unit
• Up to 900 lb load capacity
ML307798 Drain Cylinder
- Ellis replacement
- Side load/Open pocket
2 DAY
shipping
See page 10.
ML312115 Drain Cylinder
- Ellis replacement
- Side load (old style)
- Square body
• Drop-in replacement for Ellis drain cylinder
• Fully field-repairable making it very economical versus
replacing the unit
• Longer life
4
JENSEN
ML311559 Drain Cylinder
- Industry specific corrosion
resistant Jensen L Tron
replacement
• Drop-in replacement for
SMC NCDMB150-0400-XC6
• Fully field-repairable making it
very economical versus replacing the unit
• Same mounting thread and rod end thread as
replacement unit
• Competitive unit had 1/2 inch rod diameter. Our more
robust replacement has 16 mm rod diameter.
ML308223 Drain Cylinder
- Jensen L Tron replacement
• Drop-in replacement
• Fully field-repairable making it very economical versus
replacing the unit
• 800 lb load capacity
• 3/4-16 mounting thread
ML306780 Drain Cylinder
- Jensen L Tron replacement
WASHEX
• Drop-in replacement
• Fully field-repairable making it very economical versus
replacing the unit
• Industry specific corrosion resistant
• 2-1/2 Bore, 3 in Stroke
ML311741 Drain Cylinder
- Washex replacement
MILNOR
ML312118 Drain Cylinder
- Milnor replacement
• Drop-in replacement
• Fully field-repairable making it very economical versus
replacing the unit
• 63 mm Bore, 5-3/4 in Stroke
ML312119 Drain Cylinder
- Milnor replacement
- Single acting
• Drop-in replacement
• Fully field-repairable making it very economical versus
replacing the unit
• 63 mm Bore, 5 in Stroke
ML312043 Drain Cylinder
- Milnor replacement
• Drop-in replacement
• Fully field-repairable making it very economical versus
replacing the unit
• 63 mm Bore, 4-1/2 in Stroke
QT272634 Water Valve
- Milnor replacement
• Drop-in replacement
• Industrial coated springs
Milnor unit
5
PROCESS NUMBERS
1
3
5
CR Cylinders
- Door opener
- Door lock
- Bag pushing
- Bag dumping
- Jensen switch points
on conveyor
CV/SE Automation
Dynamics Bullet Sorter
- Anodized aluminum alloy heads, caps and tubes
CV Cylinders
- Door opener
- Bag pushing
- Bag dumping
- Jensen switch points
on conveyor
1
• ISO/VDMA interchange for easy mounting (metric)
• Imperial unit provides simplified integration in imperial
facilities
• PTFE wear ring and built-in
shock pads for long cylinder life
• Optional built-in port controls and
cushions for superior speed
and deceleration control
• Norman table lifting
cylinder CVAS60100x26-DB
3
ML311706 Bag
Stopping Cylinder
- Bag stopping
• Compact design for application where space is limited
• Up to six switch slots for flush switch mounting
• Self-lubricating nitrile piston seal for long cylinder life
• Multiple mounting options
ML307397 Door
Locking Cylinder
-Lavatec
• Compact design for application where space is limited
• Up to six switch slots for flush switch mounting
• Special female rod to match Lavatec tooling
• Adaptor block needed for mounting
ML312117 Door
Locking Cylinder
-Lavatec
2
• Compact design for application where space is limited
• Up to six switch slots for flush switch mounting
• Self-lubricating nitrile piston seal for long cylinder life
• Multiple mounting options
• Drop-in replacement with no mounting changes needed
• High-performance seals for increased life
8
See Triple Buck
Solutions on page 8
Series SFP Slide
- Bag closing
- Cleanwork transferring to dryers
- Cable cylinder
replacement
- Unipress Triple Buck
Ironer component
- Comp-Air, Origa and
Tolomatic replacement
• Space-saving design
• Smooth, precise movement
• Built-in rail bearing for maximum rigidity and moment
capacity
• Supported saddle to reduce wear and play
• Multiple bore sizes and long travel lengths available
• Replacement for Tolomatic Series BC2 or Origa Series
P120 rodless cylinders on Unipress Triple Buck
Unloader
Series SG Slide
- Bag closing
- FLM/Jensen overhead rail systems
• Cost effective versus OEM Solution
• Long life unit with over 5 million cycles
• Field tested in an industial laundry environment
Any other marks or names referenced herein are either registered trademarks or trademarks of
their respective owners. No association with or endorsement of any company, organization, or
product is intended or should be inferred.
6
PROCESS NUMBERS
2
2
3
Series AV Cylinder
- Bag stopping
- Jensen replacement
• Long life design for low maintenance
• NFPA repairable for extended life providing long term
savings
• Wide range of options for easy application and reduced
downtime
ML310107 Bag
Lifting Cylinder with
Adjustable Center
Trunnion Mount
- Cleanwork transferring
- Jensen Futurail or other overhead conveying system replacement
AV2R 1/1/8x6x3
- FLM rail system bag diverter
3
• Drop-in replacement for
disposable OEM cylinder
• Fully field repairable
• 3 position (0 in, 3 in & 6 in)
• Bag diverter for Fairfield
ML310566
- Jensen replacement
- Braun replacement
Laundry Machinery Corp
rail system
• Replacement for Parker
• Drop-in replacement for Jensen or Braun units
• Heavy duty and high torque
• Wide variety of options and accessories
• Pneumatic or hydraulic applications
• Replacement for Parker
• Drop-in replacement for Jensen or Braun units
• Heavy duty
• Wide variety of options and accessories
• High torque
ML310617
- Jensen replacement
- Braun replacement
4
• Drop-in replacement for any trunnion-style bag lifting
Camozzi cylinder
• Adjustable center trunnion mount
• Bore sizes 40, 50, 63, 80 and 100 mm available
• Strokes are available at any length up to 1800 mm
ML312114 Challenge
Dryer SFP Slide
- Drop-in replacement with
minor mounting adjustment
• Replacement for Origa rodless cylinder
• Fully field repairable
• Mounting change is flipping the L bracket 180°
on each end
• Mounting holes and saddle match Origa unit
Milnor Dryer Cool Down
Door Cylinder
- Milnor replacement
• Replacement for Milnor 63 mm bore, 7-3/4 in stroke
• Order # 266632
• High-temp lube and seals
Series 8400 Gripper
- Major dryer
manufacturer, King
Spreader gripper
• Longer life - over 5 million cycles
• Fast delivery
• Compact size
ML303868 Slide
- Automatic Towel
Machine
• Longer life
• No metal to metal contact
• Corrosion resistant
• Fast delivery
Series SAH
132x2-AE-M Slide
- Jensen rail system
bag stop
7
PROCESS NUMBERS
5
Series GRD Gripper
- Towel picking and
folding applications
8L
8
ML311767 Spreading
Cylinder
- Drop-in replacement
Jensen towel spreading
machine
- Better seals for
longer life
- Fully field repairable
• Longer life
• Compact
• Spring assist option
• Longer life
• Compact
• Fast delivery
complete solution
for TRIPLE BUCK
systems
ML311515
Tooling Only
ML311514
Gripper with
Tooling
ML307748
Gripper Only
• Drop-in replacement for CompAir RG072 gripper
• Longer life - over 5 million cycles
• Field tested for over 4 years
• Compact
• Steel jaws and pivot pins for precise tooling
location and decreased jaw wear
• No “rubber band repair”
CompAir Gripper Replacement
Bimba
PneuTurn
Rotary
ML311514 Gripper
with tooling
- Unloads hanger and
places hanger on
sorting line
Series RL Rotary Actuator
• Drop-in replacement for Bimba PneuTurn PT-017045
• Longer life - 5 million cycles
• Sealed ball bearings to ensure shaft stability
Bimba PneuTurn Replacement
Series SFP Slide
CompAir, Origa, & Tolomatic
Replacement
• Space-saving design
• Smooth, precise movement
• Built-in rail bearing for maximum rigidity
and moment capacity
• Supported saddle to reduce wear and play
• Multiple bore sizes and long travel lengths available
• Replacement for Tolomatic Series BC2 or Origa Series
P120 rodless cylinders on Unipress Triple Buck
Unloader
8
QT266485
Complete Modular Device
including gripper, rotary
and slide
9
sorting/conveying
solutions
cylinder lifts green
plastic hook to
release hanger
NEXT DAY
shipping
cylinder
See page 10.
ML306554 Stopper
Cylinder with
ML306576 & ML306577 kits
- Garment diverter
- Bosch 0822010500
- Jensen 60275-802
• Direct replacement for Bosch
#0822010500 and Jensen 60275-802
• Short stroke cylinder used to divert
clothing on overhead conveyors
uniform hanger puck
ORDERING CHART
ML310223
Diverter Cylinder
- Garment diverter
- Watson replacement
NEXT DAY
shipping
• Direct replacement for Watson
short stroke cylinder
used to divert clothing on
overhead conveyors
• Double acting (single acting
available)
• Available with dry film lubrication
PART NO.
306345-SB
DESCRIPTION
Threaded mounting holes in body with
external rod spring and rod end cap
306345-SP
Threaded mounting holes in body with
spacer to limit stroke to 7.5 mm
306554-SB
Thru mounting holes in body with
external rod spring and rod end cap
Thru mounting holes in body with spacer
to limit stroke to 7.5 mm
306554-SP
See page 10.
ML306345
Discharge Cylinder
- Garment diverter from
main overhead conveyor
to batching lines
- Bosch 0822010501
Jensen 401714-81
• Direct replacement for Bosch #0822010501
• Available with thread mounting holes (ML306345) or with thru mounting holes
(ML306554). Both have 12 mm bore and 10 mm stroke
• ML306345 and ML306554, PHD diverter cylinders, mount into the same space
with the same bolt pattern as the Bosch cylinder
• Double acting (single acting available)
QT268242
Diverter Cylinder
- Garment diverter from
main overhead conveyor
to batching lines
- SMC NCQ2B12-30DC
replacement cylinder
• Direct replacement for SMC NCQ2B12-30DC
• Tested for 5 million cycle life
• Fully field repairable unit
• Double acting (single acting available)
ML312034
Diverter Cylinder
- Garment diverter from
main overhead conveyor
to batching lines
- SMC NCQ2B12-10TM
replacement cylinder
• Direct replacement for SMC NCQ2B12-10TM
• Tested for 5 million cycle life
• Fully field repairable unit
• Double acting (single acting available)
QT264731
Diverter Cylinder
- Garment diverter from
main overhead conveyor
to batching lines
- SMC CQ2B16-25D
replacement cylinder
• Direct replacement for SMC CQ2B16-25D
• Tested for 5 million cycle life
• Fully field repairable unit
• Double acting (single acting available)
QT272012
Diverter Cylinder
- Garment diverter from
main overhead conveyor
to batching lines
- Bimba F0-020.375
replacement cylinder
• Direct replacement for Bimba F0-020.375
• Tested for 5 million cycle life
• Fully field repairable unit
• Double acting (single acting available)
9
shipping
on these select units
NEXT DAY
1.614
1.220
.688
.984
2X .173 THRU
.354
.335
.354
.335
.512
ML306554 Stopper
Cylinder with ML306576
& ML306577 kits
- Garment diverter
- Bosch 0822010500
- Jensen 60275-802
.750
M5 x 0.8 -4g6g
2X M5 x 0.8 PORT
.226
.250 ROD
2.145 (EXTENDED POSITION)
1.614 (RETRACTED POSITION)
Ø .420
306554-SB
306554-SP
(BASE UNIT WITH BUTTON AND SPRING INSTALLED)
ML306345
Discharge Cylinder
- Garment diverter from
main overhead conveyor
to batching lines
- Bosch 0822010501
Jensen 401714-81
PART NO.
306345-SB
Threaded mounting holes in body with external
rod spring and rod end cap
306345-SP
Threaded mounting holes in body with spacer
to limit stroke to 7.5 mm
306554-SB
Thru mounting holes in body with external rod
spring and rod end cap
Thru mounting holes in body with spacer to
limit stroke to 7.5 mm
306554-SP
2 DAY
ORDERING CHART
DESCRIPTION
shipping
ML311696 Drain Cylinder
- Industry specific corrosion resistant
STAINLESS STEEL
HEAD
.300
[7.6]
2.575
[65.4]
BODY WITH
ELECTROLESS NICKEL
PLATING
1.0620
±.0010
[27.0
±0.01]
5/8-11
UNC THREAD
1-14 UNS
THREAD
.875
[22.2]
.535
[13.6]
.185 ±.005
[4.7 ±0.1]
ML307798 Drain Cylinder
- Ellis replacement
- Side load or open pocket
4.250
[108.0]
.500 [12.7]
4X THRU & C’BORE
FOR A 1/4" SHCS
.500 [12.7]
RETRACTED
4.420 [112.3]
3.396 [86.3]
3.266 [83.0]
4X 5/16-18 UNC
THREAD .900 MIN
.512 [13.0]
2X 1/8-27
NPT PORT
.750 [19]
ROD
.670 [17.0]
.625 [15.9]
ACROSS FLATS
3.070
[78.0]
THREAD MIN
3.750 [95.3]
BOLT CIRCLE
(5.420 [137.7]) RETRACTED
10
2.360
[59.9]
NOTES:
1) ALL DIMENSIONS ARE FOR REFERENCE ONLY. STD TITLE BLOCK DIMENSIONS DO NOT APPLY.
2) UNIT CONSISTS OF A CUSTOM CRS SERIES CYLINDER (63mm BORE x 2-3/4" STROKE) WITH A CUSTOM FLANGE TO MATCH CUSTOMER CYLINDER MOUNTING.
3) SEE TITLE BLOCK FOR FULL SERIES CRS DESCRIPTION THIS CUSTOM PRODUCT IS BASED ON.
part replacement cross reference
WASHING
CONVEYING
SORTING
PROCESS
FINISHING
FOLDING
DRYING
MACHINE/use
Automation Dynamic Sorting System (Bullet Sorter)- door opening cylinder
Automation Dynamic Sorting System (Bullet Sorter)- door opening cylinder
Bag pushing cylinder
Jensen Metricon sorting system
Jensen switch points on conveyor
Jensen Metricon sorting system
Jensen Metricon sorting system
Jensen Metricon sorting system
Jensen Metricon sorting system
Jensen Conveying System (Bag Stopping cylinder)
Jensen dirty towel sorting door opener
Jensen Variant 2000 Sheet spreading Cylinder
Jensen dirty towel sort door opener w/50 mm less travel no lost efficiency
Softrol hangar stop
Hangar Rail Diverter
Softrol Rail diverter
Gardener Rail system Rail Diverter
Gardener Rail system Rail Diverter
FLM Rail system Diverter Cylinder
FLM Rail system Diverter Cylinder
FLM Rail system Diverter Cylinder
FLM Rail system Diverter Cylinder
Stopper cylinder
Stopping cylinder for garments Metricon system
Stopping cylinder for garments Metricon system with spring button
Diverter cylinder Metricon sorting system
Diverter cylinder Metricon sorting system with spring button
FLM Sorting System (Hangar Push)
Table lifting cylinder
Table lifting cylinder
Towel sorting machine
Bag closing cylinder
Bag closing cylinder
Bag dumping cylinder empty before load in sorting machine
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag lifting with adjustable trunion
Bag stopping cylinder Jensen conveyor
FLM bag lifting
Braun door Lock cylinder mounting change needed
Braun drain cylinder
Braun Drain Cylinder Pony 220lbs
Braun rotary door double rack
LaVatec door locking cylinder mount plate needed
Ellis drain cylinder
Ellis drain cylinder square old washer
LaVatec drain cylinder
Ellis Side Loader
Jensen hydraulic door rotary
Jensen hydraulic door rotary
Jensen drain cylinder
Jensen L-Tron drain cylinder
Jensen SenKing Tunnel Washer Drain cylinder (Single Acting)
Jensen SenKing Tunnel Washer Equalization Chamber Cylinder
Milnor large flange single acting
Milnor tunnel drain long
Milnor tunnel drain short
LaVatec open pocket door lock cylinder
Braun open pocket door rotary
Challenge dryer cylinder
Milnor dryer (cool down door)
Clippard
Bimba
Camozzi
SMC
Camozzi
SMC
SMC
SMC
Bosch
SMC
Camozzi
Metal Work
Camozzi
SMC
SMC
SMC
OEM
OEM
SMC
BIMBA
BIMBA
Bimba
Watson
Bosch
Bosch
Bosch
Bosch
Etech
TRD
TRD
TRD
Origa
Tolomatic
Bimba
Camozzi
Camozzi
Camozzi
Camozzi
Camozzi
Camozzi
Camozzi
Camozzi
Camozzi
Bimba
COMPETITOR & PART #
UDR 32 24 G
SR-0917-DP
24N2A25A250
SMC CQB20-10D
24N2A20A100
SMC C85N16-10
SMC C85N16-50
SMC C85N20-50
822010501
CQSB 25-25D
24N2A25A025
Single rack
P124-S/22x22-bm
63x7-3/4
CVAS2V50x23-DB15-M-T44
CVBS6P25x17
CVBS6P25x250-DB-PB-M
ML312122
CVBS6P20x100-DB-M
ML312123
ML312124
CVCS6P20x50
ML306345
ML311706
AVP1x1.25-M
ML 311767
CVAS6v32x150-m
271417
272653
271418
271398
271397
271152 w/ 60283-1 pivot
272735
272734
272012
ML310223
ML306554 (thru hole)
ML306554-SB (thru hole)
ML306345 (threaded)
ML306345-SB (threaded)
ML312120
ML311742
CVAS60100x26-DB
266641
SFP627x1400-AB-DB-PB-M
SGD43x40-DB
CVBS6P20x100-DB-M
ML312211
ML312212
ML312213
ML312214
ML312215
ML312216
ML312217
ML312218
ML312219
AVRF11/8x2-1/2 with 1/2 Rod
CVAS6V100x406.4
CRS3U32x2.125-BB
ML311696
ML 312241
ML310617
ML307397
ML307798
ML312115
ML307675
ML312116
R11H7090-D 264726
R11H7180-D 256714
M311559
ML306780
ML 312440
268976
ML312119
ML312118
ML312043
ML312117
ML310566
ML312114
266632
27M2A32A0200SP
NCQ2B12-10
NCQ2B12-30DC
Custom Unit Round body 10mm bore 1 inch stroke with bumpers
CRS3u40x1 with removable nose thread
CRS3u40x5 with removable nose thread 3/4x16
NCMC150-0200 CRS3u40x2-k23-t44 61.4mm mrod extension
FO-092 1-1/16 bore 2in stroke
FO-091.25 1-1/16 bore 1.25 in stroke
FO-020375 Pancake
0822010500/ Jensen # 60276-802
0822010500/ Jensen # 60276-802
0822010501/ Jensen # 401714-81
0822010501/ Jensen # 401714-81
FP9 ....A10-202M
5 in bore 25 in Stroke (steel head, cap, tube)
4 in bore 26 in Stroke (steel head, cap, tube)
5 in bore 25 in Stroke (aluminum head, cap, tube)
Rodless
Rodless
093-DP
60m2L100F1900
60m2L100F0550
60m2L100F1000
60m2L080F1600
60m2L080F0750
60m2L080F0600
60m2L080F0450
60m2L080F0400
60m2L080F0100
4 in Bore 16 in stroke
Parker
Parker
Parker
Custom Cylinder
Custom Cylinder
PressMair
Custom Cylinder
Parker
SMC
SMC
Pneumatics
Pneumatics
Milnor Tunnel Drain Cyl
Milnor Tunnel Drain Cyl
Milnor Tunnel Drain Cyl
Parker
Origa
Milnor
PHD PRODUCT
P1200143
LTR202180AX23C046
1130123138
LP/01465 EPDM C 85-75 SE
Hydraulic shot pin
HTR 30-0908-XC12-c174***R11H7090-D
R11H7180-D
NCDMB150-400-XC6
NCDMB150-400-XC6
N 11309, HL 105667-1, 1 3/4 bore, 3 1/2 stoke
50 mm bore 3 in stroke w/ 13 1/2 rod extension
CVAS2V 63x5-3/4
2-3/8" bore x 4-1/2" Stroke
Jensen auto sort
Metal Work
1130250100XP
CVCS6P25x100-M-DB
Jensen folder door flap
Metal Work
135A320200CP
CVAS6V32x200-DB
Jensen folder door flap
Metal Work
135A320050CP
CVAS6V32x50-DB
Jensen folding machine
Metal Work
1130320650XP
CVAS6v32x650-DB
Jensen folding machine
Metal Work
113U250080CJ
CVCS6P25x80-M-DB
Jensen rail bag system
Metal Work
1120400200CP
264742
Jensen folding machine
Metal Work
135A320065XP
CVAS6V32x65-DB
Jensen folding machine
Metal Work
1130320065XP
CVAS6V32x65-DB
Central Napkin Folder Indexing cylinder
Bosch
0822120009 32X320 Iso 6431 Need Pivot Mount 52489-01-1
CVAS6V32X320-M
Jensen Napkin Folding machine indexing cylinder
Motion Controls
D12sencsl14ra1 Avb1-1/8X14 With Removable Mounting Plate
271162
Chicago Dryer Sheet Cylinder
Bimba
Fs-092.25
272736
Jensen Napkin Folding machine folding flap cylinder
BIMBA
Sr-173-Dp With Pivot Mount 60283-1 Phd
CRS3U40X3-K12-T22
Jensen spreading machine
Metal Work
113U250080CJ
ML312125
Jensen towel folding machine
Bimba
042-DP
CVBs2p20x2 .03 inches longer
Kanagessier towel picking machine (mouting change needed)
FESTO
DGP-32-2100-PPV-A-B
SFP640x2100 -AB-DB-M 264722
Unipress triple buck rotary
Bimba
PT-017045
RLS120x45-BB
Unipress triple buck rodless slide
Tolomatic or Origa
BC2 or P120
SFP627x1175-AB-DB-M-L9
RG072
ML 311514
Unipress triple buck gripper
CompAir
Unipress triple buck or Colmac shirt press modular device replacement
Unipress or Colmac
Emblem machine
Texas Automation
11
266485
DOS-40
272640
PHD Standard Products
PS
CLAM
PA Swing Arm
Clamp
Ideal for a wide
variety of automated
part holding and
transfer applications
PEC Arm Over
Clamp
Superior part holding
for assembly and
welding applications
Up to 900 in-lb
[102 Nm] torque
CR and CT
Cylinders
Compact size
8 bore sizes from
12 to 63 mm
For part holding and
positioning in weld areas
Enclosed finger design
keeps weld slag out
50 mm bore
PB Swing Arm
Clamp
Ideal for part holding
and transfer welding
applications
S
S
RIE
ROTA
NDER
CYLI
PLK Pin Locating
Clamp
RIS Rotary
CV Cylinder
Conforms to ISO
6432, 6431 and
VDMA 24562
specifications
Available in eight sizes
ECV Electric Slide
RA Rotary
Retains zero backlash
5 sizes and 6
standard rotations
Eliminates external
air lines
High torque
High axial load
capacity
Longer stroke up to
1000 mm
Faster speed than
competitor
Precision ball screw
Inline or foldback
motor mounting
ML310393
Electric Slide with
Washdown
CLASS 5
Meets IP67 guidelines
AC servo with resolver
All stainless steel
construction
ES
SLID
SIP Slide
SFM Slide
Multiple midstops
Space saving rodless
slide design
Lowest deflection
and highest moment
capacity combination
in the industry
Low profile design
utilizes rail bearing
technology for smooth
precision movement
Multiple mounting
surfaces
3 sizes with up to
2.953" [75 mm] of
travel
Typical loads up to
4.5 lb [20 N]
SM Slide
SHP Slide
Compact design
utilizes rail bearing
technology for smooth
precision movement
Multiple mounting
surfaces
3 sizes with up to
2.17" [55 mm] of travel
Typical loads up to
2.53 lb [11.25 N]
SD/SE Slide
Thruster style slides
with up to 28" [700
mm] of standard travel
Typical loads up to
50 lb [223 N]
High performance,
many options and low
price
SFP Slide
Space saving rodless
slide design
Lowest deflection
and highest moment
capacity combination
in the industry
2 bore sizes with
standard travel
lengths to 3400 mm
Precision ball or
polymer bushings
Smooth linear motion
at twice the thrust of a
single bore cylinder
5 bore sizes with
travel lengths up to
6" [150 mm]
Typical loads up to
70 lb [311 N]
Long life
PERS
GRIP
GRF Gripper
GRW Gripper
Large tooling surfaces
and precision dowel
holes for accurate
tooling attachment
Long tooling lengths
and high moment
capabilities
Reduced deflection
GRS Gripper
Low profile, high force
Rugged jaw support,
hardened jaws and
hardcoated bearing
surfaces
5 sizes
2 jaw travels each
size
GRB Gripper
Three total jaw
rotations are available
60°, 90°,
and 180°
6 sizes
Grip forces up to
549 lb [2443 N] at
1.90" [48.3 mm] from
pivot
Low profile to fit limited
space applications
Jaw covers help
prevent contamination
Rugged jaw support,
hardened jaws, and
hardcoated bearing
surfaces for long life
4 sizes with grip
forces up to
116 lb [516 N]
GRK Gripper
Highest grip force in
its class
Precision jaw
movement wear
compensating over life
of unit
High moment capacity
for longer tooling and
greater part weights
EGRK Gripper
Electric parallel gripper
with long or short jaw
travels with high force
or high speed
Precision jaw
movement wear
compensating over
life of unit
“Cover Photo Copyright FreeStockImages.org”
http://www.freestockimages.org
50 2/15 9088