Furniture fittings, architectural hardware, electronic locking systems

Alto Drawer System
opening up new opportunities
2013
Smooth and effortless
Reinforcing these concepts, the Alto drawer system offer an
affordable solution coupled with quietness, smoothness
•
•
•
•
•
Load capacity:
Material:
Finish:
Version:
Adjustment:
and ease of use.
The synchronised opening action of the Alto drawer is
• Mounting:
supremely comfortable, thanks to proven knowledge
behind this soft-closing technology, leaving you in no doubt
35 kg
Steel drawers
Powder coated, white
Full extension, with integrated soft-close
Front: 2 dimensional, also tilt for drawer
front adjustment with railing system
Adjustment horizontally ± 1 mm,
adjustment vertically ± 2 mm
Front fix brackets snap into drawer sides
with knock-in mounting on drawer front
Mounting
of its quality.
Options aplenty
With a wide variety of drawer options available - including
86mm and 120mm standard drawer options, and 164mm and
204mm pot drawer options - the Alto drawer system suits
almost every application. Combined with length options from
270mm to 500mm, and multiple Alto-Box infill panels, the Alto
drawer ticks all of the boxes.
Tried and tested
Adjustment
The Alto drawer system has been independently tested
and passed the exacting European DIN EN15338 Level 3
standards. This was achieved with a full 35 kg weight
Drawer insertion and removal
2
Alto Drawer System
Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice.
capacity over 60,000 opening and closing cycles
Alto Drawer System
Drawer Set 86 mm
Drawer Set 120 mm
Mounting
Mounting
• Height:
• Finish:
• Includes:
86 mm
White drawer sides and cover caps
Drawer sides, runners, knock-in front
fixing brackets, back panel brackets and
white cover caps
• Height:
• Finish:
• Includes:
120 mm
White drawer sides and cover caps
Drawer sides, runners, knock-in front
fixing brackets, back panel brackets and
white cover caps
32
44.5
32
min. 56
136
min. 150
9
37.5±0.5
Drilling dimensions for cabinet
Drilling dimensions for back
Drilling dimensions for cabinet
Drilling dimensions for back
Drilling dimensions
for drawer front
Drilling dimensions
for drawer front
Drilling dimensions
for drawer front
Packing: 1 set
37.5±0.5
Drilling dimensions
for drawer front
Drilling dimensions for drawer runner
Drilling dimensions for drawer runner
Drawer length (mm)
270
400
450
500
min. 54
32
19.5
min. 54 32
Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice.
12
Cat. No.
552.66.760
552.66.763
552.66.764
552.66.765
Drawer length (mm)
270
400
450
500
Cat. No.
552.67.760
552.67.763
552.67.764
552.67.765
Packing: 1 set
Alto Drawer System
3
b
Alto Drawer System
Drawer Set 204 mm
Drawer Set 164 mm
• Height:
• Finish:
• Includes:
164 mm
White drawer sides and cover caps
Drawer sides, runners, knock-in front
fixing brackets, back panel brackets and
white cover caps
Mounting
• Height:
• Finish:
• Includes:
204 mm
White drawer sides and cover caps
Drawer sides, runners, knock-in front
fixing brackets, back panel brackets and
white cover caps
Mounting
64
32
min. 56
32
220
min. 225
32
9 44.5
37 ± 0.5
Drilling dimensions for cabinet
Drilling dimensions for back
19.5
Drilling dimensions
for drawer front
Drilling dimensions
for drawer front
Drilling dimensions for drawer runner
Drawer length (mm)
270
400
450
500
Packing: 1 set
4
Alto Drawer System
min. 54 32
32
min. 54
10
Drilling dimensions
for drawer front
37 ± 0.5
Drilling dimensions
for drawer front
Drilling dimensions for drawer runner
Cat. No.
552.63.760
552.63.763
552.63.764
552.63.765
Drawer length (mm)
270
400
450
500
Packing: 1 set
Cat. No.
552.64.760
552.64.763
552.64.764
552.64.765
Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice.
Drilling dimensions for back
132
Drilling dimensions for cabinet
Alto Drawer System
Alto-box single metal hanging panel
• Finish:
• To suit:
White, powder coated, steel
164 mm drawer sets
Drawer length (mm)
400
450
500
Cat. No.
552.69.753
552.69.754
552.69.755
Packing: 1 pair
Alto-box double metal hanging panel
Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice.
• Finish:
• To suit:
Drawer length (mm)
400
450
500
White, powder coated, steel
204 mm drawer sets
Cat. No.
552.69.763
552.69.764
552.69.765
Packing: 1 pair
Alto Drawer System
5
Alto Drawer System
Internal Front Panel for 86 mm Drawer
Internal Front Panel for 204 mm Drawer
→ Internal front panel
• Finish:
White
→ Internal front panel and cross rail
Cat. No.
552.69.780
Front panel, 1074 mm
• Finish:
White
Packing: 1 piece
Cat. No.
552.69.780
552.69.786
Front panel, 1074 mm
Cross rail, 1074 mm
→ Standard front panel connectors
Packing: 1 piece
• Finish:
White
Cat. No.
552.69.790
→ Tall front panel connectors
• Finish:
White
Packing: 1 pair
Cat. No.
552.69.791
Assembly
Packing: 1 pair
→ Handle for internal front panel
• Finish:
White
Cat. No.
552.69.799
Packing: 1 piece
Adjustment
6
Alto Drawer System
Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice.
Assembly
Alto Drawer System
Technical Information
Drawer Front Marker Jig
Cutting dimensions - drawer set 86 mm
Bottom panel width=LW-75+0.5mm
Bottom panel length=Runner length-5mm
Bottom panel height=70mm
Back panel length=LW-89+0.5mm
• Area of application: Used to mark the front fix bracket drilling
positions on the drawer front
• Finish:
Anthracite, plastic
Cat. No.
552.69.999
Packing: 1 pair
16 mm thickness material
LW: Internal cabinet width
Cutting dimensions - drawer set 120 mm
Bottom panel width=LW-75+0.5mm
Bottom panel length=Runner length-5mm
Gallery Rail Marker Jig
Bottom panel height=104mm
Back panel length=LW-89+0.5mm
16 mm thickness material
LW: Internal cabinet width
• Area of application: Place over installed front fix bracket to
determine gallery rail position on drawer
front
• Finish:
Anthracite, plastic
Cutting dimensions - drawer set 164 mm
Bottom panel width=LW-75+0.5mm
Bottom panel length=Runner length-5mm
Cat. No.
552.69.990
Bottom panel height=148mm
Back panel length=LW-89+0.5mm
Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice.
Packing: 1 piece
Accessories
Knock-in front fix bracket
Knock-in gallery rail connector
Cover cap
Cat. No.
552.69.997
552.69.998
552.61.770
16 mm thickness material
LW: Internal cabinet width
Cutting dimensions - drawer set 204 mm
Packing: 1 piece
Bottom panel width=LW-75+0.5mm
Bottom panel length=Runner length-5mm
Note
Customised cover caps are available upon request
(MOQ = 2000 pieces)
Bottom panel height=188mm
Back panel length=LW-89+0.5mm
16 mm thickness material
LW: Internal cabinet width
Runner drilling dimensions
Alto Drawer System
7
HÄFELE AUSTRALIA PTY. LTD.
State Offices
Victoria (Head Office)
T: (03) 9212 2000
F: (03) 9212 2001
E: [email protected]
New South Wales
T: (02) 8788 2200
F: (02) 8788 2201
E: [email protected]
A.C.T & Southern NSW
T: (02) 6202 2800
F: (02) 6228 1418
E: [email protected]
Northern New South Wales
T: (02) 4921 0900
F: (02) 4921 0901
E: [email protected]
Queensland
T: (07) 3307 8900
F: (07) 3307 8901
E: [email protected]
South Australia
T: (08) 8232 9933
F: (08) 8232 9977
E: [email protected]
Western Australia / N.T.
T: (08) 9209 8000
F: (08) 9249 3328
E: [email protected]
Tasmania
T: (03) 6331 7106
F: (03) 6334 6414
E: [email protected]
Design Centres
Melbourne Design Centre
T: (03) 9212 2000
F: (03) 9652 3701
E: [email protected]
Sydney Design Centre
T: (02) 8788 2200
F: (02) 8302 2101
E: [email protected]
Brisbane Design Centre
T: (07) 3307 8900
F: (07) 3307 8901
E: [email protected]
Perth Design Centre
T: (08) 9209 8000
F: (08) 9215 6101
E: [email protected]
Hobart Design Centre
T: (03) 6331 7106
F: (03) 6334 6414
E: [email protected]
HÄFELE NEW ZEALAND LTD.
Offices and Design Centres
Häfele (NZ) Head Office
Eastern Design Centre
T: (09) 274 2040
F: (09) 274 2041
E: [email protected]
Auckland Design Centre
T: (09) 274 2530
F: (09) 274 2531
E: [email protected]
Wellington Design Centre
T: (04) 472 0294
F: (04) 472 0295
E: [email protected]
Christchurch Design Centre
T: (03) 343 8200
F: (03) 343 8201
E: [email protected]
www.hafele.com
This Catalogue is for use of the recipient only. It remains in all respects the property of Häfele. Reproduction of this brochure in whole or part, or the reproduction of the illustrations as well as the copying of the layout, is strictly prohibited.
All measurements given in this publication are not binding. Rights for design improvements reserved. Häfele holds no responsibility for typographical or other errors occurring in the catalogue production. All deliveries made corresponding to Häfele sales conditions.
Häfele reserves the right to adjust prices as may be deemed necessary.
2012. Copyright by Häfele. All rights reserved. Printed in Australia.
732.04.592 - 12.12