USA - Carvin Guitars

Transcription

USA - Carvin Guitars
Your choice of a fixed bridge, Tune-o-matic bridge, Wilkinson tremolo or Original
Floyd Rose in chrome, black or gold.
Ebony, Rosewood, Bird’s Eye & hard
rock Maple fingerboards are available
along with your choice of inlays: dot,
block and diamond shapes available in
white Mother of Pearl & Abalone.
Various headstock shapes along with your
choice of exotic woods. Sperzel locking tuners, graphite nut and the tilt-back
headstock all contribute to pure tone and
rock-solid tuning stability. No string tree
needed!
Your choice of 10”, 12”, 14” & 20”
fingerboard radii along with your preference of 3 different Nickle-Silver and 2
Stainless Steel fretwire profiles.
Carvin Classic Alnico-V humbuckers offer
incredible warmth and definition. Many optional models and colors to choose from.
24
24
With Carvin’s custom shop you now have more choices than ever to create your
own custom instrument. In the last couple of years we have added options like
bird’s eye maple and rosewood fingerboards along with stainless steel frets in both
standard and jumbo sizes. New deep stained finishes are available to compliment
the beauty of our highly figured maple tops. To enhance the tone of our guitars
more models of Carvin pickups are available than ever before not to mention the
acoustic bridge options that are offered for many of our instruments. However,
more important than our growing list of options is our commitment to building
high quality guitars. Our modern 82,000 square foot plant in San Diego is equipped
with the finest guitar building machinery in the industry. The use of high quality
woods and our constant improvement in manufacturing methods are an ongoing
quest at Carvin. Several years ago we began to cycle all of our necks and fingerboards through a long conditioning process in our de-humidification chambers.
What this does is remove any possible stress in the wood. Stress in the wood is
what causes your neck to warp or twist, and it may not fully develop for months
or years after an instrument is built. This painstaking extra step is one of the
reasons why our guitars and basses are known for their longevity and consistent
playability.
If Carvin guitars were available in retail stores, you would pay up to
three times more than our factory direct prices. By selling direct, Carvin
not only gives incredible value but also provides you with a direct
connection to the guitar builder. This is something you do not get when purchasing
retail. With the best build up times in the industry along with our risk free 10-day
money back guarantee, there has never been a better time to order your Carvin Custom
Shop instrument.
5 Year Warranty
All Custom Shop guitars & basses carry a 5 year
limited warranty against manufacturing defects.
Carvin installs and registers the SNAGG™ microchip
in every guitar and bass ($50 value). The hidden
micro-chip carries its own registration number documenting your ownership. If your instrument is ever lost
or stolen, once scanned, will identify the rightful owner.
For more visit snagg.com.
Optional Acoustic-Electric System
Fishman™ Wilkinson™ acoustic tremolo
3-Way humbucking pickup selector
Master volume
Active humbucking tone
Pan control for blending between
humbuckers and acoustic pickups
Active acoustic tone
Coil splitters for C22’s
Phase switch for C22’s
Fishman™ acoustic fixed bridge.
Carvin.com features an inventory list
of guitars and basses ready to ship!
800.854.2235
The FA series option is available in a fixed
or tremolo version on the following models:
Contour 66, TL60, DC127, DC200, DC400.
carvin.com
Dual outputs allow you
to separate the electric
& acoustic signals, or
combine them into one jack
25
Average Build-up time for your
custom shop instrument is 5 to 9 weeks!
woods and finishes
Optional body woods
1-800-854-2235
(see price l i s t )
Hard Rock Maple (N. East USA)
Alder (North West USA)
Genuine Mahogany (Honduras)
Swamp Ash (Southern USA)
Black Walnut (Eastern USA)
Koa (Hawaiian Islands)
We use premium Eastern
hard rock maple for our necks
because of its time proven
strength and stability. As a
body wood, hard rock maple
being very heavy and dense,
delivers a bright sustaining
tone. Maple has a wonderful light grain that looks great
with all of our translucent
finishes.
Alder is the standard body
wood for Carvin solid body
guitars and basses. Due to
its relatively light weight, this
wood is very resonant with
upper midrange definition.
Alder is a classic tone wood
and has been present in solid
body electric guitars from the
beginning. Alder has a medium light color, slightly darker
than maple and swamp ash.
Genuine Mahogany has an
inherent warm quality with
accentuated low-midrange.
Mahogany is also considered
to be a classic tone wood.
It is denser and heavier
than Alder, but lighter than
Maple. Mahogany along with
our flamed or quilted maple
tops, gives great sustain and
warmth. Genuine Mahogany
should not be confused with
less expensive Philippine and
African Sapele.
This vintage wood comes
from Southern swamps.
The portion of the tree that is
suitable for high quality lightweight Swamp Ash, is actually submerged underwater for
years which yeilds a porous
lightweight wood. This wood
delivers slightly less midrange with full low-end and
nice singing highs. Swamp
Ash is light in color with rich
grain patterns and matches
the color of our Eastern Hard
Rock Maple necks–looks great
with translucent finishes.
Eastern Black Walnut is a
dense medium hard wood
that is slightly heavier than
Mahogany. Its tonal quality
is warm with a growling low
end and a bright top end,
especially when used for
bass–it will really cut through
in the mix. Black walnut has
medium dark beautiful grain
patterns and looks great with
gloss or satin finishes.
Koa is an exotic medium
weight wood grown exclusively
in the Hawaiian Islands. It was
used by ancient Hawaiians to
build canoes and surfboards.
Koa has warmth and sustain
similar to Mahogany and also
possesses the clear open tone
of Alder. Koa looks wonderful whether you choose a tung
oiled, satin or gloss finish.
O p t i o n a l B o d y T o p w o o d s (see
C
price list)
AAAA Flamed Curly Maple (N. West USA)
AAAA Quilted Maple (N. West USA)
Flamed Curly Koa (Hawaiian Islands)
Figured Claro Walnut (California)
Engleman Spruce (USA) - for acoustics
Cedar (Canada) - for acoustics
Carvin’s Flamed Curly Maple
tops come from the Northwest
portion of the United States.
It is lighter in weight than
Eastern Hard Rock Maple and
produces singing highs with
a tight low end. Sound’s wonderful over our standard Maple
neck/Alder body sides or
optional Genuine Mahogany.
Carvin’s Quilted Maple tops
also come from the Northwest
United States. Quilted Maple
produces similar tones to the
Flamed Curly Maple. The figure can vary from large cloud
shapes to smaller pockets–
looks great with all translucent
finishes and stains.
Flamed Curly Koa is the
premium wood for building Ukuleles and high-end
acoustic guitars. Whether you
choose to add Flamed Curly
Koa to the top of your acoustic
or solid body, the tone will
benefit from added sweetness
and pronounced midrange.
Koa looks wonderful whether
you choose a tung oiled, satin
or gloss finish.
Claro Walnut is the most
sought after figured walnut
on the market. A walnut top
will add a unique look and
a brighter tone in the upper
register with a darker growling
low end. The figure can vary
between a flame and quilted
look with variations in patterns
and shades of brownish root
beer colors and black.
Known for its pure light color
and uniform grain, Engleman
Spruce is considered one of
the finest woods for Acoustic
Guitar tops. It has a brighter
tone than Cedar with a very
nice and even low-end
response.
Cedar has a very nice reddish
brown color with even straight
grain and comes standard on
our CL40. It has been used
for hundreds of years as a top
wood on classical and flamenco guitars. It has a very warm
tone with subdued high end
when compared to spruce.
S t a n d a r d S o l i d C o l o r s N/C
Printed representations of paint & wood colors may vary slightly to the real instrument.
M e t a l l i c S o l i d C o l o r s $50 $25
NEW for 2008
B Jet Black
W Classic White
WW White White
PB Pearl Blue
R Ferrari Red
Optional Translucent Finishes $50 $25
TR Cherry Red
TP Purple
TG Emerald Green
TY Vintage Yellow
TS Cherry Burst
TT Tobacco Burst
(shown on standard Alder)
TE Green Burst
TD Classic Burst
TB Sapphire Blue
TL Blue Burst
TU Sunset Burst
CP Copper Head
BM Blue Mist
EB Electric Blue
CR Candy Red
EG Evergreen
PG Platinum Gold
O p t i o n a l F l a m e M a p l e F i n i s h e s $320 $160
FTR Crimson Red
FTP Purple
FTG Emerald Green
FTE Green Burst
FTB Sapphire Blue
FTL Blue Burst
FTY Vintage Yellow
FTS Cherry Burst
FTT Tobacco Burst
FTD Classic Burst
FTU Sunset Burst
FSR Ruby Red Stain
FSK Black Stain
FSA Antique Brown Stain
FSU Umber Stain
FTC Clear Finish
FSS Umber Stain
with Sunset Burst
O p t i o n a l Q u i l t e d M a p l e F i n i s h e s $500 $250
QTR Crimson Red
QTP Translucent Purple
QTG Emerald Green
QTE Greenburst
QTB Sapphire Blue
QTL Blue Burst
QTY Vintage Yellow
QTS Cherry Burst
QTT Tobacco Burst
QTD Classic Burst
QTU Sunset Burst
QSR Ruby Red Stain
QSK Black Stain
QSA Antique Brown Stain
QSU Umber Stain
QTC Clear Finish
26
800.854.2235
carvin.com
QSS Umber Stain
with Sunset Burst
Cre
Custom Shop Features and Options
STANDARD FEATURES FOR most CARVIN neck-through-body GUITARS
• Maple neck-through-construction (AC175, AC275, AE185 use mahogany neck-through)
• Smooth neck-to-body heel for effortless playability to the last fret
• Tone enhancing alder wood body sides (all thin acoustics use mahogany)
• Premium grade Ebony fingerboard
• Precision medium-jumbo (.048 tall x .103 wide) hard alloy German fretwire by Jescar is super long
lasting and polished for effortless string bending and precise intonation.
• Scale Length: All neck through guitars 25”(Holdsworth, Seven String & Bolt: 25 1/2”)
• D­­ual action truss rod
• Sperzel™ locking tuners
• Graphite nut with teflon helps keep guitar in tune.
• Strings: Elixir Nano Web .010 - .046 guage super long lasting strings
• Chrome hardware standard
• Standard Colors: Jet Black, Classic White, White White, Ferrari Red, Pearl Blue, Tung Oil Finish, Clear Gloss,
Clear Satin
With more choices of woods, finishes, and options than ever before
you can order most Carvin models in over 50,000 different combinations and not have the same instrument built alike. What’s even
better, Carvin’s custom shop is building each instrument to the exact
detail and shipping it within 8 weeks (on most orders).
This is made possible by our efficient method of keeping all components such as necks, fingerboards, pickups and hardware in stock.
For help in choosing the best options to build your dream machine,
call and talk with one of our friendly and knowledgeable experts.
They’ll be glad to help you build your dream machine.
OPTIONS — GUITARS AND BASSES
Fingerboard Options
(Certain options not available on some models)
Exotic Woods and Finishes
Note: You can add a translucent color to the gloss wood finishes below.
(example NMAH + TT = Mahogany wood with translucent tobacco sunburst gloss finish)
ASH Swamp Ash body . ..................................................................................................$80
MAH Maple neck & mahogany body ............................................................................$100
NMAH Mahogany neck & mahogany body .....................................................................$200
WAL Maple neck & walnut body...................................................................................$100
NWAL Walnut neck & walnut body . ...............................................................................$200
KOA Maple neck & koa body.........................................................................................$240
NKOA Koa neck & koa body.............................................................................................$480
TC
Maple neck & body (increases weight by 3/4 lb.)...................................................$100
MT
Maple top,10mm thick, book matched (Acoustics use MTA 3mm top $80).......$160
HT
Mahogany top,10mm thick, book matched (Acoustics use HTA 3mm top $100)$200
KT
Koa top, 10mm thick, book matched (Acoustics use KTA 3mm top $150).........$300
FK
Flamed koa top,10mm thick, book matched (Acoustics: FKTA 3mm top $250)$500
FW Figured walnut top,10mm, book matched (Acoustics: FWTA 3mm top $160) . ....$320
CG
Clear high gloss finish............................................................................................. N/C
CS
Clear matte satin finish . ........................................................................................ N/C
TF
Tung oil satin finish.................................................................................................N/C
BST Black bursted edge over optional wood or color...................................................$50
CST Cherry bursted edge over optional wood or color..................................................$50
SST Sunset bursted edge over optional wood or color.................................................$50
DTSDeep Triple step stain (only available with flame or quilted maple top)............$160
Body and Neck Options
L
RB
5M
5MW
5WM
5H
5K
NS
TN
Lefthand model (certain options and Floyd tremolos not available)................N/C
Fully rounded body edges............................................................................................$60
5-piece Laminated maple neck with two koa stripes ..........................................$240
5-piece Laminated maple neck with two walnut stripes.....................................$200
5-piece Laminated walnut neck with two maple stripes.....................................$240
5-piece Laminated mahogany neck with two maple stripes...............................$240
5-piece Laminated koa neck with two maple stripes...........................................$360
Optional 5-piece neck is covered by optional figured top . ....................................$80
Tung oil finish back of neck...................................................................................$100
Headstock Options
TH
CTH
PH
BPH
KPH
FKPH
WPH
FWPH
FPH
QPH
ABL
ETR
GL Traditional headstock with 3 + 3 tuners as on AE185, 2 + 2 on 4-string basses...$40
CT6 headstock shape with 3 + 3 tuners as on CT6, 2 + 2 on 4-string basses.........$40
Headstock to match body color...............................................................................$40
Black painted headstock ........................................................................................$40
Koa headstock overlay (order for mahogany necks also)......................................$40
Flamed Koa headstock overlay...............................................................................$60
Walnut headstock overlay......................................................................................$40
Figured Claro Walnut headstock overlay...............................................................$50
AAAA Flamed maple headstock overlay................................................................$50
AAAA Quilted maple headstock overlay................................................................$50
Abalone Carvin headstock logo...............................................................................$60
Engraved truss rod cover (personalized with your name)......................................$20
Gold plated metal Carvin logo on Headstock (as on CT6 Carved Top)....................$40
RWF
MF
BMF
R10
R14
Rosewood fingerboard...........................................................................................N/C
Maple fingerboard with black dots (N/A with block inlays)..............................N/C
Bird’s Eye maple fingerboard with black dots (N/A with block inlays)..............$60
10” fingerboard radius (N/A on H2, HF2, CL450, NS1 or 5 & 6 string basses).........$80
14” fingerboard radius (N/A on CL450 or NS1) ......................................................$80
Inlay Options
NIN
ABD
MP
AB
DMP
DAB
No inlays on top of fingerboard (side dots only).....................................................N/C
Abalone dot inlays...................................................................................................$40
White Mother-of-pearl block inlays......................................................................$100
Abalone block inlays (as on DC400)......................................................................$160
White Mother-of-pearl diamond inlays (only available on 25” scale guitars)........$60
Abalone diamond inlays (only available on 25” scale guitars)..............................$100
Fretwire Options
6100
6130
STF
STJF
Jumbo fretwire .055 tall x .110 wide......................................................................$30
Low profile fretwire .036 tall x .106 wide...............................................................$30
Stainless Steel frets, med-jumbo .048” tall x .103” wide.......................................$80
Stainless Steel frets, jumbo .055” tall x .110” wide ...............................................$80
Hardware Options
BC
G
WK
SL
LN
SS
Black hardware........................................................................................................$40
Gold plated hardware.............................................................................................$80
Wooden knobs (Rosewood) NEW!.........................................................................$10
Straplocks by Dunlop™...........................................................................................$20
Lock nut for Floyd Rose tremolo (installed)............................................................$50
String Saver Graphite Saddles (guitars with FT6 & FT7 fixed bridge only).............$40
Pickup and Electronic Options
S22J
S22B
31
32
36
AC
Metal covered neck pickup (matches guitar hardware color) NEW!......................$20
Metal covered bridge pickup (matches guitar hardware color) NEW!...................$20
Add one dual/single coil mini switch ....................................................................$20
Add two dual/single coil mini switches..................................................................$40
Add phase mini switch (places pickups out of phase for thinner tone)..................$20
Active Electronics as used on DC400 (not available on all models).......................$100
BASS Options
FI
FID
HS
HB2
HB2N
SP2
STS
FWS
Fretless fingerboard with white inlayed fret lines..................................................$60
Fretless fingerboard with white inlayed fret lines & dot inlays..............................$80
Hipshot™ bass detuner installed............................................................................$70
Replace H50S bridge pickup with HB series humbucker & coil splitter..................$60
Replace H50S neck pickup with HB series humbucker (must also order HB2).......$50
2 Soapbar humbuckers............................................................................................$60
Stainless Steel Round Wound strings (replaces nickel round-wounds).....................$10
Flat-wound bass strings (replaces standard Nickel round-wounds).......................$20
Order Now &
take 50% Off
all options & finishes
ETR optional engraved truss rod
cover makes a great personalized
addition to your custom guitar.
Specify 1 or 2 lines. Up to ten
characters per line.
ORDER YOUR CUSTOM
SHOP INSTRUMENT
WITH AS LITTLE AS
20% DOWN
10 day money back guarantee
Optional
Pickup Colors $10
on Carvin Custom shop instruments
Black Pickups are Standard
Cream coils & bezel (402)
Cream coils & black bezel (403)
Track your Custom Shop order online while it is built.
Cream & black coils & black bezel (406) Cream & black coils & cream bezel (407) Black coils & cream bezel (408)
800.854.2235
www.carvin.com/guitartraq
carvin.com
27
Semi-Hollow Carved Top
SH550
Tune-O-Matic bridge
List $3899
1699
$
!
W
E
N
SH575
Tune-O-Matic bridge
with GraphTech Synth Access
List $4199
1999
$
As low as
$51 per month
50% OFF
MADE IN
USA
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC 16 $148 $74
Hardshell Black Case
Steve Oliver
SH575 Synth Access OPTIONS SHOWN:
Deep Red on Flame (FDR6)
Abalone Block Inlays (AB)
Gold Hardware (G)
True Semi Hollow
Carved Arch Top.
(unlike other manufacturers with
a bent plywood veneer top)
SH575 SYNTH ACCESS
The SH575 model has the exceptional tone of the SH550 with the
addition of the acclaimed GraphTech Synth Access electronics,
as featured in Carvin’s breakthrough NS1 guitar. This preamp
provides realistic hollow-body acoustic tone. Simply connect a
guitar synth and get orchestras, flutes and virtually any instrument
at your fingertips.
SH575 CARVED TOP FEATURES:
• Graphtech Hexaphonic Synth Access Pickup
• 13-pin jack for Synth and 1/4” jack for Humbuckers
• Master volume, Tone and 3-way pickup selector
• Push pull tone offers single coil operation for each pickup or both pickups together humbucking
• Concentric controls for Synth Access. See details below.
outputs: 1/4 inch electric &
acoustic and 13-pin MIDI
Synth jack, one 13-pin jack
runs all access of the SH575
including phantom power.
• Humbucker volume and tone with coil splitter push/pull pot
• stacked volumes for Hexaphonic Midi and piezo acoustic
• stacked mid cut/boost and mid sweep controls
• stacked treble and bass cut/boost controls
• switch scrolls through MIDI patches
28
800.854.2235
carvin.com
SH550 OPTIONS SHOWN:
Deep Clear on Quilt (QDC6)
Abalone Block Inlays (AB)
Gold Hardware (G)
SH550 Carved Top
Carvin introduces a true Carved Top Semi Hollow Custom Shop masterpiece. This
guitar features a beautifully sculpted top of the finest Curly-Flamed Maple. The top
starts out as a 2” thick piece of solid Curly Flamed maple. After it is sawed into a
two-piece book matched set, not only is the top sculpted, but the underside of the
top is also carved to follow the contour of the top. The back of the body and the neck
are made of hand selected genuine Mahogany for added warmth. The harmonically
rich covered humbuckers ooze with deep and defined tone and sustain. Carvin’s
“Rapid Play” low action neck assures effortless playability throughout the entire
fingerboard, while the sleek set-in neck heel and lower body cutout allow easy uninhibited access at the 22nd fret. Whether you are a semi-hollow aficionado or a rock
enthusiast, The SH series guitars are sure to take their rightful place in your collection as
one of your main guitars.
SH CARVED TOP FEATURES:
• Premium Mahogany set-in neck & body
• Highest quality 20mm thick Curly-Flamed
Maple carved top with natural binding effect
• Matching figured Maple headstock overlay
• 24k Gold plated CARVIN logo on headstock
• Sperzel locking tuners
• 25” scale ebony fingerboard
• Abalone dot inlays
• 22 medium jumbo frets
• S22 Classic Chrome humbuckers (optional Gold)
• Master volume and 3-way pickup selector
• Push pull tone offers single coil operation for each pickup or
both pickups together humbucking
• Body size: 14.1” wide, 2.1” thick at edge, 2.6” thick at center
• Triple step, stained colors for extra depth
SH Options:
Premium quilted top (example QDB6) $360 $180
Abalone block inlays (AB) . . . . . . . . . . . .$160 $80
Back and edges painted black (BGB) . . . . $40 $20
Black edges and black burst back (BBB) . $40 $20
For other options see page 26
Optional: All Flame Maple Body (FMB) & Neck (FMN)
DEEP TRIPLE-STEP STAINED COLORS
(SHOWN WITH OPTIONAL QUILTED TOPS)
For standard Curly-Flame top replace Q with an F
SH550 OPTIONS SHOWN:
Deep Vintageburst on Flame (FDV6)
Traditional Headstock (TH)
Abalone Block Inlays (AB)
Gold Hardware (G)
800.854.2235
Deep Vintageburst
(QDV6)
Deep Sunsetburst
(QDS6)
Deep Tiger’s Eye
(QDT6)
Deep Blue
(QDB6)
Deep Green
(QDG6)
Deep Natural Clear
(QDC6)
Deep Red
(QDR6)
Deep Antique Brown
(QDA6)
Deep Purple
(QDP6)
Deep Black
(QDK6)
Dragon Burst
(QDD6)
carvin.com
29
California Carved Top
CT6M
Tune-O-Matic bridge
w/ strings thru body
List $3599
1479
$
CT6T
Wilkinson tremolo
List $3649
1499
$
CT6C
Floyd Rose tremolo
List $3799
1559
$
As low as
$44 per month
50% Off
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC11 108 $54
$
Hardshell ABS Case
HC 12 $148 $74
Hardshell Vintage
Tweed Case
CUSTOMER COMMENT
When I opened the case I couldn’t
believe my eyes. Awesome!
Photos cannot do justice to the
real thing. The sound is awesome – intonation perfect.
– Warner Matthew Boles Sr. CT.
CT6T options shown:
Deep Green Flame (FDG6)
Blck Plated Hardware (BC)
“Carvin has an attention to detail I
just don’t find in other companies.
I absolutely love this guitar.”
-Joe Walsh
Watch the new Carvin DVD and see Joe
talk about his guitar and take a tour of
the Carvin Factory.
Get your copy at carvin.com/DVD
CT6 Carved top FEATURES:
• Premium Mahogany set-in neck & body
• Highest quality 20mm thick Curly-Flamed
Maple carved top with natural binding effect
• Matching figured Maple headstock overlay
• 24k Gold plated CARVIN logo on headstock
• Sperzel locking tuners
• 25” scale ebony fingerboard
• Abalone dot inlays
• 22 medium jumbo frets
• C22J and C22B classic humbuckers
• Master volume and 3-way pickup selector
• Push pull tone offers single coil operation
for each pickup or both pickups together
humbucking
• Triple step, stained colors for extra depth
(standard with Curly-Flame Maple top)
Options:
Premium quilted top (example QDB6)$360 $180
Abalone block inlays (AB) . . . . . . . . . . . . $160 $80
Back and edges painted black (BGB). . . . $40 $20
Black edges and black burst back (BBB) . $40 $20
For other options see page 26
CT6 Carved Top
Carvin is proud to offer the “California carved top”. This exquisite guitar features a beautifully sculpted top of the finest Curly-Flamed Maple. The back of the body and the neck
are made of hand selected genuine Mahogany for added
warmth. Classic C22 humbuckers are custom wound with
vintage plain enamel wire which helps bring out the harmonically
rich tone and sustain of this fine instrument. Carvin’s “Rapid Play”
low action neck assures effortless playability throughout the entire
fingerboard, while the sleek set-in neck heel and lower body cutout allow easy uninhibited access at the 22nd fret. The California
Carved Top is available in several different exclusive triple step stained
colors, which dramatically bring out the rich highlights of our highly
figured maple tops.
DEEP TRIPLE-STEP STAINED COLORS
(SHOWN WITH OPTIONAL QUILTED TOPS)
For standard Curly-Flame top replace Q with an F
30
800.854.2235
Deep Vintageburst
(QDV6)
Deep Sunsetburst
(QDS6)
Deep Tiger’s Eye
(QDT6)
Deep Blue
(QDB6)
Deep Green
(QDG6)
Deep Natural Clear
(QDC6)
Deep Red
(QDR6)
Deep Antique Brown
(QDA6)
Deep Purple
(QDP6)
Deep Black
(QDK6)
Dragon Burst
(QDD6)
carvin.com
CT
CT6M options shown:
Deep Tigers Eye Quilt (QDT6)
Cherry Burst Edge (CST)
Mother of Pearl Block Inlays (MP)
The CT6M compares favorably with custom-made
guitars costing more than twice the price. While
there are a lot of competitive models within
Carvin’s price range, few can go head to head with
the CT6M’s craftsmanship, materials and tone.
- Chris Gill
Guitar World ‘05 Holiday Issue
Future Network USA
Moonie
Steel Pulse
“Carvin’s entry delivers amply
on the promise of its looks..it
certainly rates our “1 Award.””
-Douglas Baldwin, Guitar One Dec ‘04,
Future Network USA
CT3M
CT4M
Tune-O-Matic bridge
w/ strings thru body
List $2399
Tune-O-Matic bridge
w/ strings thru body
List $2549
1149
$
1219
$
CT3T
CT4T
Wilkinson tremolo
List $2449
Wilkinson tremolo
List $2599
1169
$
1239
$
CT3C
CT4C
Floyd Rose tremolo
List $2499
Floyd Rose tremolo
List $2649
1229
1299
$
CT3M
options shown:
Clear Gloss (CG)
Abalone Dot
Inlays (ABD)
CT3M
“With its eye-popping quilted-maple top,
abalone block inlays, gold-plated
hardware, and impeccable
finish, our test-sample
Carvin CT6M flaunts an
irresistible abundance
of aesthetic allure...
Representative of the highest
level of the luthier’s art, and offering
great playability and great tones, the CT6M is proof positive that Carvin does indeed deserve a place alongside
the world’s most respected guitar builders.”
Guitar Player Dec ‘04
$
options shown:
Jet Black (B)
Abalone Block Inlays (AB)
Cream Pickups (402)
Gold Hardware(G)
CT4M
options shown:
Left Handed (L)
Blue Burst (TL)
Abalone Block Inlays (AB)
Gold Hardware(G)
st
CT3 Mahogany
The CT3 has the same features as the CT6,
except the carved body is made entirely of
rich Mahogany. Solid and optional translucent colors are applied to the entire guitar.
CT4 Maple Top
The CT4 also has the same great features
of the CT6. However, the Mahogany body
is capped with standard Eastern Maple.
Solid and optional translucent colors are
applied to the top only. The back and
sides are finished in natural gloss to show
the beautiful Mahogany.
Options:
CT3 & CT4 - not available with Flame or Quilt tops
All translucent colors listed on pg 26 are
available
GT Gold Top (CT4 only) . . . . . . . . . . $120 $60
For other options see page 26
r
800.854.2235
carvin.com
31
California Single
CS6M
Tune-O-Matic bridge
w/ strings thru body
List $3599
CS6M
1479
$
options shown:
Deep Sunsetburst on Quilt (QDS6)
Abalone Block Inlays (AB)
Metal Covered Neck PU (S22J)
Metal Covered Bridge PU (S22B)
Gold Hardware (G)
CS6S
Tune-O-Matic bridge
w/ stop tail
List $3599
1479
$
CS6T
As low as
$44 per month
California single
Where most set-in neck guitars have a cumbersome heel and don’t set into the body any
further than the fingerboard, the CS guitar
has an exclusive smooth “heel-less” design for
improved access to all frets. The neck actually sets 5 inches into the body and extends
underneath the neck pickup for amazing
sustain. To top it off, the California Single is
equipped with a pair of our tone enhancing
Classic Humbuckers.
MADE IN
USA
CS6 CAlifornia Single:
50% Off
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC11 $108 $54
Hardshell ABS Case
HC 12 148 74
$
$
Hardshell Vintage
Tweed Case
CS6M options shown:
Deep Green
on Flame (FDG6)
Metal Neck PU (S22J)
Metal Bridge PU (S22B)
• Premium Mahogany set-in neck & body
• Highest quality 20mm thick Curly-Flamed
Maple carved top with natural binding effect
• Matching figured Maple headstock overlay
• 24k Gold plated CARVIN logo on headstock
• Sperzel locking tuners
• 25” scale ebony fingerboard
• Abalone dot inlays
• 22 medium jumbo frets
• C22J and C22B classic humbuckers
• Master volume and 3-way pickup selector
• Push pull tone offers single coil operation
for each pickup or both pickups together
humbucking
• Triple step, stained colors for extra depth
(standard with Curly-Flame Maple top)
See page 30 for deep color chart.
CS3 Mahogany
The CS3 has the same features as the
CS6, except the carved body is made
entirely of rich Mahogany. Solid
and optional translucent colors are
applied to the entire guitar.
CS3M
Tune-O-Matic bridge
w/ strings thru body
List $2399
1149
$
CS3S
Options:
Premium quilted top (example QDB6)$360 $180
Abalone block inlays (AB) . . . . . . . . . . . . $160 $80
Back and edges painted black (BGB). . . . $40 $20
Black edges & black burst back (BBB) . . . $40 $20
Metal covered Neck pickup (S22J) . . . . . . . $40 $20
Metal covered Bridge pickup (S22B) . . . . . $40 $20
For other options see page 26
Tune-O-Matic bridge
w/ stop tail
List $2399
1149
$
CS3T
Wilkinson tremolo
List $2449
1169
$
CS3C
Floyd Rose tremolo
List $2499
1229
$
32
800.854.2235
CS3M options shown:
Jet Black (B)
Stainless Steel Jumbo Frets (STJF)
Metal Covered Neck Pickup (S22J)
Metal Covered Bridge Pickup (S22B)
Gold Hardware (G)
carvin.com
Wilkinson tremolo
List $3649
1499
$
CS6C
Floyd Rose tremolo
List $3799
1559
$
CS4 Maple Top
The CS4 has the same features as the
CS6. The Mahogany body is capped with
Eastern Maple. Solid and optional translucent colors are applied to the top only.
The back and sides are finished in natural
Mahogany.
CS4M
Tune-O-Matic bridge
w/ strings thru body
List $2549
1219
$
CS4S
Tune-O-Matic bridge
w/ stop tail
List $2549
1219
$
CS4T
Wilkinson tremolo
List $2599
1239
$
CS4C
Floyd Rose tremolo
List $2649
1299
$
CS4S options shown:
Cherry Sunburst (TS)
Mother of Pearl Block Inlays (MP)
Metal Covered Neck Pickup (S22J)
Metal Covered Bridge Pickup (S22B)
Cream Bezels (408)
DC400
FT6 fixed bridge
List $2599
DC400A
1199
$
FT6 fixed bridge
List $2999
1399
$
DC400M
Tune-O-Matic bridge
w/ strings thru body
List $2649
DC400W
FT6 fixed bridge
List $2999
1399
$
DC400MA
DC400MW
1219
Tune-O-Matic bridge
w/ strings thru body
List $3049
Tune-O-Matic bridge
w/ strings thru body
List $3049
Wilkinson tremolo
List $2699
DC400TA
DC400TW
$
DC400T
1419
$
1239
$
Wilkinson tremolo
List $3099
1439
$
DC400C
Floyd Rose tremolo
List $2799
DC400CA
1299
$
Floyd Rose tremolo
List $3199
1499
$
As low as
$36 per month
1419
$
Wilkinson tremolo
List $3099
1439
$
DC400CW
Floyd Rose tremolo
List $3199
1499
$
50% Off
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC11 $108 $54
Hardshell ABS Case
HC 12 $148 $74
Hardshell Vintage
Tweed Case
DC400M options shown:
Umber Stain on Quilt (QSU4)
Quilt Matching Headstock (QPH)
Rounded Body Edges (RB)
Black Hardware (BC)
DC400TA options shown:
Cherry Sunburst on Quilt (QTS4)
Matching Quilt Headstock (QPH)
Fishman Acoustic Bridge (FA)
Cream colored pickups (402)
Gold Hardware (G)
DC400
The DC400 Series with all of its
extra attention to detail and premium standard features represents
Carvin’s finest neck through six
string solid body. Create your own
custom DC400 by choosing from a
host of options such as a tung oiled
neck, headstock style, fret wire,
pickup color and even your own
custom engraved truss rod cover.
dge
dy
dge
o
lo
DC400C options shown:
Sunsetburst on Flame (FTU4)
Matching Flame Headstock (FPH4)
Carved Top Headstock (CTH)
Lock Nut for Floyd Rose (LN)
Fully Rounded Body Edges (RB)
Gold Hardware (G)
800.854.2235
• Maple neck through alder body
• AAAA flamed maple top
• AAAA flamed head stock overlay
• Abalone block inlays
• Flamed translucent colors (N/C)
• C22J & C22B humbuckers
•502G ACTIVE/PASSIVE ELECTRONICS:
Pickup selector, 2 Dual/single
coil switches and a Phase switch.
Passive mode includes master
volume & passive tone control.
Active mode includes master volume, active cut/boost for bass &
treble.
• 24k Gold plated CARVIN logo on
headstock
DC400 OPTIONS:
DC400W options shown:
Fishman Acoustic Bridge (FA)
Gold Hardware (G)
DC400A Anniversary
The Anniversary Model has all of
the outstanding amenities of the
DC400 but includes a five piece
maple/walnut neck and three
piece laminated body to further
enhance its appeal.
• AAAA flamed maple top
• 3 piece laminated body with fully
rounded edges
• 5 piece Maple & Walnut neck
through alder body
• 25” scale Ebony fingerboard with
24 frets
• Smooth neck to body heel
• Abalone block inlays
• Any flamed Maple color or stain
DC400A OPTIONS SAME AS
DC400 with:
FPH4 Flame Headstock . . . . . . . . . . . N/C
NS Five piece neck is covered by
figured top . . . . . . . . . . . . . . . . . . . . . $80
DC400W Claro Walnut
The DC400W features an awesome
figured Claro Walnut top and 5-piece
neck. This combination of exotic
woods produces a wonderful tone.
• AAAA Claro Walnut top
• 3 piece Claro Walnut/AlderWalnut
DC400 OPTIONS:
body with fully rounded edges
RB Fully Rounded Body Edges............$60
FA Fishman Acoustic FT6 or Wilkinson ..$200 • 5 piece maple/walnut laminated neck
QTC4 Quilted top & headstock......... $180 DC400W OPTIONS same as
DC400 plus:
FK4 Flame Koa top & headstock...... $180
FPH4 Flame Headstock . . . . . . . . . . . N/C
For colors & options see page 26
NS Five piece neck is covered by
figured top . . . . . . . . . . . . . . . . . . . . . $80
carvin.com
33
Ultra V
ULTRAVM
The Ultra V is back by popular demand and is a
favorite among metal and hard rockers world wide.
Available with the standard M-bridge with strings
fed through the body or with a Floyd Rose.
Tune-O-Matic bridge
w/ strings thru body
List $1399
919
$
ULTRAVC
Floyd Rose tremolo
List $1499
ULtra V FEATURES:
(See page 26 for neck through body features)
• Maple neck through alder body for amazing sustain
• Smooth neck to body heel
• 6 inline pointed angled heastock standard on Ultra V
• 25” scale ebony fingerboard with dot inlays
• Sperzel™ locking tuners
• Neck dimensions: 1.69” wide at nut, 2.22” wide at 24th fret
• Pickups: C22J neck humbucker, C22B bridge humbucker
• Controls: 3-way pickup selector, master volume, master
tone with push/pull coil splitting switch
999
$
50% Off
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC19 $179 $89
Black Hardshell Case
OPTIONS
V V headstock (shown on V220) . . . . . . . . . . . . . . . $60
MADE IN
USA
For colors & options see page 26 & 27
V220M
Tune-O-Matic bridge
w/ strings thru body
List $1399
919
$
V220C
Floyd Rose tremolo
List $1499
999
$
ULTRAVM
Smooth
Neck Heel
options shown:
Jet Black (B)
No Inlays on Fingerboard (NIN)
Stainless Steel Frets (STF)
Gold Hardware (G)
V220
The V220 is back by popular demand. Originally introduced in 1984, the V220 was played by chart topping
artists of the decade such as Craig Chaquico (Starship)
and Marty Friedman. The V220 was among the top
selling guitars Carvin made in the 1980’s. Available
with the standard M-bridge with strings fed through
the body or with a Floyd Rose.
V220 FEATURES:
V220C Options Shown:
Umber Stain with Sunsetburst on Quilt (QSS)
Matching Quilt Headstock (QPH)
Abalone Block Inlays (AB)
Floyd Rose Lock Nut (LN)
Stainless Steel Jumbo Frets (STJF)
Cream/Black Pickups (406)
Phase Switch (36)
Gold Hardware (G)
(See page 26 for neck through body features)
• Maple neck through alder body for amazing sustain
• Smooth neck to body heel
• V headstock standard on V220
• 25” scale ebony fingerboard with dot inlays
• Sperzel™ locking tuners
• Neck dimensions: 1.69” wide at nut, 2.22” wide at 24th fret
• Pickups: C22J neck humbucker, C22B bridge humbucker
• Controls: 3-way pickup selector, master volume, master tone
with push/pull coil splitting switch
OPTIONS
PTH 6 inline pointed angled headstock (see Ultra V) . . . . $80
For colors & options see page 26 & 27
34
800.854.2235
carvin.com
MADE IN
USA
DC747
DC727
FT7 fixed bridge
List $2099
FT7 fixed bridge
List $2049
999
$
959
$
DC747C
DC727C
Licensed Floyd Rose tremolo
List $2299
Licensed Floyd Rose tremolo
List $2199
1069
$
1029
$
As low as
$29 per month
Tony MacAlpine
Tony MacAlpine plays both Carvin
DC127C six string and DC727C
seven string guitars. Tony’s
guitars feature his personalized
TMACVI and TMACVII logos on
the headstock.
DC727 options shown:
Figured Claro Walnut Top (FW)
Figured Walnut Headstock (FWPH)
Abalone Dot Inlays (ABD)
Gold Hardware (G)
DC747C options shown:
Emerald Green on Quilt (QTG)
Deep Triple Stain (DTS)
Matching Quilt Headstock (QPH)
Floyd Rose Lock Nut (LN)
Abalone Block Inlay (AB)
Black Hardware (BC)
DC727
DC747
These 7-string models feature a
comfortable 251/2” scale neck which
makes the shift from 6-string suprisingly easy. Neck through body construction, ebony fingerboard and a
hard rock maple neck all contribute
to the strength and great sustain
of the DC727 and DC747 guitars.
Carvin C26 humbuckers are custom
wound to give a full fat tone. The
DC747 adds a center position AP13
single coil pickup for aditional tone
variations. Choose from Carvin’s
wide selection of woods, finishes
and hardware options to create your
very own custom 7-string.
50% Off
all options, finishes
and case!
Limited Time Offer!
e
with guitar purchase
DC727C options shown:
Ruby Red Stain on Quilt (QSR)
Black Burst Edges (BST)
Matching Quilt Headstock (QPH)
Rosewood Fingerboard (RWF)
Mother of Pearl Block Inlays (MP)
Stainless Steel Fretwire (STF)
800.854.2235
HC11 108 $54
$
DC747 options shown:
Left Handed Model (L)
White White (WW)
Mother of Pearl Block Inlays (MP)
Stainless Steel Jumbo Fretwire (STJF)
Black Hardware (BC)
DC727 & DC747 FEATURES:
(See page 27 for neck through body features)
Maple neck through alder body for
amazing sustain
Smooth neck to body heel
Fully rounded body edges
25 1/2” scale ebony fingerboard
Sperzel™ locking tuners
Neck dimensions: 1.9” wide at nut, 2.6”
wide at 24th fret
Both feature two C26 humbuckers and
DC747 adds one AP13 single coil pickup
DC727: volume, tone, 3-way pickup
selector & 2 dual-to-single coil switches
DC747: volume, tone, 5-way pickup
selector pos
•
•
•
•
•
•
•
•
•
1. Neck C26 humbucking
2. Neck C26 single coil + center AP13
3. Center AP13
4. Bridge C26 single coil + center AP13
5. Bridge C26 Humbucking
DC727 OPTIONS:
AC DC400 active/passive electronics................. $100
DC747 Options
32 Two Coil Splitting Switches for Humbuckers $40
For colors & options see page 26 & 27
Hardshell ABS Case
HC 12 $148 $74
Hardshell Vintage
Tweed Case
carvin.com
35
As low as
$26 per month
DC135
DC145
DC127
919
$
879
$
FT6 fixed bridge
List $1899
DC145M
DC135M
879
$
Tune-O-Matic bridge
w/ strings thru body
List $1949
DC127M
Tune-O-Matic bridge
w/ strings thru body
List $1949
899
$
899
939
DC145T
Wilkinson tremolo
List $1999
Wilkinson tremolo
List $2049
919
$
DC127T
Wilkinson tremolo
List $1999
959
$
DC145C
DC135C
919
$
DC127-12
DC127C
Floyd Rose tremolo
List $2179
Floyd Rose tremolo
List $2099
1019
979
$
$
12-String
List $2299
Floyd Rose tremolo
List $2099
Tune-O-Matic bridge
w/ strings thru body
List $2019
$
DC135T
$
Tu
FT6 fixed bridge
List $1979
FT6 fixed bridge
List $1899
999
$
979
$
50% Off
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC11 $108 $54
Hardshell ABS Case
HC 12 $148 $74
Hardshell Vintage
Tweed Case
MADE IN
USA
DC127 options shown:
Mahogany Neck and Body with Gloss Finish (NMAH)
No Inlays on Fingerboard (NIN)
Rounded Body Edges (RB)
Gold Hardware (G)
DC127
The DC127 is one of Carvin’s best
selling solid body electrics because
of features like neck through body
construction, sperzel locking tuners,
and the versitility of the C22 pickups
with dual to single switching. Also
available is the DC127M model with
strings feeding through the body
over a special Tune-o-matic bridge
for increased sustain and definition.
DC127 FEATURES:
(See page 27 for neck through body
features)
Maple neck through alder body
Smooth neck to body heel
C22J & C22B humbuckers
Volume, tone & 3-way pickup selector
Two dual-to-single coil switches
•
•
•
•
•
DC127 OPTIONS:
FA Fishman Acoustic FT6 or Wilkinson Tremolo
bridge see pg. 25 (must also order ACA option) $200
ACA Active electronics for FA option . . . . . . . . . . $100
AC DC400 active/passive electronics . . . . . . . . . . $100
“This remarkable-sounding instrument is
deep and clear, with nice stringiness and
spank. Notes sound round and harmonically detailed in humbucker mode, and the
single-coil selections are bright and punchy.
The DC127T is one chunky and intense beast
in super-high-gain conditions, and even the
most heavily saturated chords retain definition. A very versatile guitar that can easily
cover rock, blues or country duties.”
DC127M options shown:
Emerald Green on Quilt (QTG)
Quilted Headstock (QPH)
Abalone Dot Inlays (ABD)
Rounded Body Edges (RB)
Gold Hardware (G)
-Art Thompson, Joe Gore, & Cris Gill
Feb 1995 Guitar Player
36
800.854.2235
DC145T options shown:
Jet Black (B)
Abalone Block Inlays (AB)
Tung Oil Finish Back Of Neck (TN)
Fully Rounded Body Edges (RB)
Two Coil Splitting Switches (32)
Phase Switch (36) Gold logo (GL)
Gold Hardware (G)
DC135M options shown:
Flame Koa Top (FK)
Matching Koa Headstock (FKPH)
Mother of Pearl Block Inlays (MP)
Fully Rounded Body Edges (RB)
Black Hardware (BC)
carvin.com
DC127-12
12-string
The DC127-12 twelve string model
has the same features as the DC127 with
the addition of DC400 active-passive
electronics.
DC135
DC145
The DC135 has tonal variations perfect for both rhythm and leadsbridge
humbucker. The AP11 single coil pickups give you great humbucking tones
when played together. The bridge
C22B is ideal for leads. As an option
you can replace the AP11’s with TBH
twin blade humbuckers. The DC145
is the same except the neck pickup is
a C22 Humbucker and it’s equipped
with a 5-way switch.
DC135 FEATURES
(See page 27 for neck through body features)
Maple neck through alder body
Smooth neck to body heel
Two AP11’s & one C22B bridge humbucker
Master volume & tone
Three on/off switches give 7 different
pickup combinations
•
•
•
•
•
DC135 OPTIONS:
TBH Twinblade Humbuckers-Black..................$20
TBH-6 Twinblade Humbuckers-Cream/Black.......$20
26 5-way lever replaces 3 on-off switches..........$20
29 5-way lever sw & 3 AP11’s (angled bridge pu)$20
31 Coil splitter for C22.....................................$20
For colors & options see page 26 & 27
SC90S
Tune-O-Matic bridge w/stop
tail piece
List $1899
TL60
879
$
FT6 fixed bridge
List $1869
849
$
SC90M
Tune-O-Matic bridge
w/ strings thru body
List $1949
TL60T
Wilkinson tremolo
List $1969
899
$
SC90T
889
$
MADE IN
USA
Wilkinson tremolo
List $1999
919
$
SC90C
CUSTOMER COMMENT
Floyd Rose tremolo
List $2099
I was stoked when I opend the
case and this beautiful work
of art. The guitar sounds and
plays great. TL60T
– Raymond Ginnetti, VA
979
$
As low as
$26 per month
50% Off
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC11 $108 $54
Hardshell ABS Case
HC 12 $148 $74
Hardshell Vintage
Tweed Case
SC90S options shown:
Mahogany Neck and Body (NMAH)
Mother of Pearl Block Inlays (MP)
Fully Rounded Body Edges (RB)
TL60T options shown:
Antique Brown on Quilt (QSA)
Matching Quilt Headstock (QPH)
No Inlays on Fingerboard (NIN)
C22 Humbuckers with coil splitter (127)
Cream/Black Pickup Coils (406)
Black Hardware (BC)
SC90S
The SC90 has a vintage style single
cutaway body, neck-through-body
construction, effortless accessability
to 24 frets, comfortable body sculpturing and Sperzel locking tuners.
The Carvin C22J neck humbucker has
a smooth classic sound that vintage
players love. The C22B bridge humbucker with its extra windings and
double thick Alnico V magnet gives
amazing sustain with rich harmonics.
e
s
e
n
H
5
s
d
SC90S FEATURES:
(See page 27 for neck through body features)
Maple neck-through-alder body
Smooth neck to body heel
Sperzel™ locking tuners
Tune-O-Matic bridge & Stop tailpiece
Traditional headstock standard
C22J & C22B classic humbuckers
3-way pickup selector
Separate volume & tone controls
•
•
•
•
•
•
•
•
SC90S options shown:
Umber Stain, Sunset Burst Flame (FSS)
Flamed Headstock (FPH)
Carved Top Headstock (CTH)
Rounded Body Edges (RB)
Abalone Block Inlays (AB)
Gold Hardware (G)
800.854.2235
TL60 options shown:
White White (WW)
TL60
The TL60 single cutaway body offers
neck-through-body construction,
comfortable body sculpturing, tiltback headstock and Sperzel locking
tuners. AP11 single coil pickups have
a gutsy warm tone. Choose from
several other pickup or electronic
options including the Fishman™
Piezo bridge for realistic acoustic
performance.
TL60 FEATURES:
(See page 27 for neck through body
features)
Maple neck through alder body
Smooth neck to body heel
Two AP11 pickups for classic tone
Master volume & tone, 3-way lever switch
& series-parallel mini switch
•
•
•
•
TL60 OPTIONS:
FA Fishman Acoustic bridge & C22 humbuckers
(must also order ACA option) see pg. 25.......$200
ACA Active electronics for FA option see pg. 25$100
SC90S OPTIONS:
RB Fully Rounded Body Edges...................... $60 AC DC400 active/passive electronics ............ $100
22 Replace vol. & tone w/2 coil taps..............N/C 33 C22B bridge pickup & 3-way coil taps.... $40
127 C22 humbuckers with coil splitter......... $60
For colors & options see page 26 & 27
129 3 AP11 pickups w/5-way lever.............. $60
135 DC135 pickups & controls w/5-way lever$60
TBH Twinblade Humbuckers-Black............ $20
TBH-6 Twinblade Humbuckers (Cream/Black)$20
BB Multi-layer tortoise body binding......$160
For colors & options see page 26 & 27
The Carvin TL60T received five out of five scores
in practically every category in Guitar Player’s
July 1993 Shootout of 32 guitars. The TL60T
also won the “Most Versatile Of Genre” award
among guitars costing as much as $3,700.
carvin.com
37
C66
BOLT
As low as
$22 per month
FT6 fixed bridge
List $2179
999
$
FT6 fixed bridge
List $1499
729
$
BOLT-T
C66M
Wilkinson tremolo
List $1599
Tune-0-Matic Bridge
w/ strings fed thru body
List $2279
769
$
1019
$
CUSTOMER COMMENT
MADE IN
C66T
I was blown away! The
workmanship and playability were unmatched, the
sound: incredible, AND it
was built to my specs. This
thing is a Tone Monster.
The amazing thing to me
is that I bought a supposed
‘low-end model’ Carvin
Bolt-T that beat the pants
off a ‘high-end’ Fender®!
– Lee Scott Howard
USA
Wilkinson tremolo
List $2279
1039
$
C66C
Floyd Rose tremolo
List $2379
1099
$
50% Off
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC11 $108 $54
Hardshell ABS Case
HC 12 $148 $74
Hardshell Vintage
Tweed Case
C66T options shown:
Umber Stain on Flame (FSU4)
Matching Headstock Standard N/C
Bird’s Eye Maple Fingerboard (BMF)
Pickups: Humbucker-Single-Single (HSS)
BOLT-T options shown:
Blue Mist (BM)
Bird’s Eye Maple Fingerboard (BMF)
Bird’s Eye Maple Headstock (BMNH)
Abalone Dot Inlays (ABD)
Black Hardware (BC)
Contour 66
The bolt
The “Contour 66” has features and
attention to detail that place it among
the finest and most elite instruments
made. The 5mm thick premium flamed
or optional quilted maple top is set off
at the edges of the body to highlight
the figured maple binding effect. The
sweeping body curves also add to the
striking looks and effortless playability.
Carvin’s Bolt offers features and
custom shop options unavailable
from any other USA made guitar.
The Carvin Bolt comes standard
with improved features such as
a tilt back headstock, two-way
adjustable truss rod and a perfectly fit neck to body joint which aids
in sustain and tuning stability.
Premium grade alder wood body
AAAA flamed maple top and headstock
Flamed maple body binding effect
Precise fitting neck pocket for added sustain
25 1/2” scale ebony fingerboard with dot inlays
Tung oil satin finish on hard rock maple neck
Tilt back headstock provides crisper open notes
Sperzel™ Locking Tuners
Two direct mount C22 humbucking pickups
5-way pickup selector allows neck humbucking,
neck single coi e single coils combined for humbucking, bridge single, bridge humbucking
• Master volume & tone
• Colors: Any Flamed Maple Translucent color
(pg 26)
• Premium grade alder wood body
• Precise fitting neck pocket for added sustain
• 25 1/2” ebony fingerboard with dot inlays
• Tung oil finish on hard rock maple neck
• Tilt back headstock for crisp open notes
• Carvin premium 14:1 ratio tuning keys
• Three AP11 single coils for a fat rich tone
• 5-way pickup selector plus a mini switch
allows all seven pickup combinations
• Master volume & tone
• White multi-layer pickguard
• Colors: black, white, red, white white, pearl
blue, tung oil, clear gloss
•
•
•
•
•
•
•
•
•
•
C66 OPTIONS:
C66M options shown:
Antique Brown Stain on Quilt (QSA4)
Black Painted Headstock (BPH)
Rosewood Fingerboard (RWF)
Center AP11 Single Coil Pickup (CAP)
38
BOLT options shown:
Tobacco Sunburst (TT)
Matching Painted Headstock (PH)
Sperzel Locking Tuners (SP)
Red Tortoise Pickguard (RP)
Twin Blade Humbuckers (TBH)
QTC4 Quilted Top and Headstock upgrade......... $180
CAP Center AP11 single coil (cream CAP2)..........$60
CTB Center Twin Blade humb. (CTB6 Cream/Black)......$60
HSS Neck & center single coil & bridge humbucker$60
FA Fishman Acoustic FT6 or Wilkinson Tremolo bridge
(must also order ACA option.............................. $200
ACA Active electronics for FA option (page 25)....... $100
AC DC200 active/passive electronics ................ $100
800.854.2235
carvin.com
BOLT OPTIONS:
PH Matching painted headstock . . . . . . . $40
TBH Twinblade Humbuckers (TBH-6 Cream/Black)$20
22B C22B bridge humbucker w/ coil splitter $30
WP White pearloid multi-layer pickguard$30
BP Black pearloid multi-layer pickguard $30
RP Red tortoise multi-layer pickguard . . $30
SP Sperzel™ locking tuners . . . . . . . . . . . $60
For colors and options see pgs 26 & 27
HF2
FATBOY
50% Off
all options, finishes
and case!
Tune-O-Matic bridge
List $2449
Limited Time Offer!
1199
$
with guitar purchase
As low as
$36 per month
HC11 $108 $54
Hardshell ABS Case
HC 12 148 74
$
$
H2
Tune-O-Matic bridge
List $2199
1059
$
H2T
Wilkinson tremolo
List $2299
1099
$
Hardshell Vintage
Tweed Case
CUSTOMER COMMENT
I was a dedicated PRS
player but decided to
t r y s o m e t h i n g d i f f e rent. I was amazed when
my Holdsworth arrived.
Impeccable workmanship,
flawless fit and finish, great
action and sound. The
Fatboy blew away the tone
and clarity of my recorded
PRS tracks. I started selling off the other guitars and
I now have 2 more Fatboys
and a CT6.
– John Camp, DE
HC11 $98 $54
Hardshell ABS Case
HC12 case N/A for HF2
MADE IN
USA
Allan Holdsworth
See Allan talk about his guitar and take the
Carvin Factory Tour. carvin.com/DVD
“My Fatboy semi-hollow
electric features unique
twin beam floating suspension that allows the
top and back to resonate
freely. A very sonorous
and focused tone is the
result. ”
Fatboy
Floating twin beam
suspension
Allan Holdsworth
H2 options shown:
White White (WW)
Rosewood Fingerboard (RWF)
No Inlays on Fingerboard (NIN)
2 Coil Splitter Switches (32)
Phase switch (36)
Cream Pickups (402)
Gold Hardware (G)
d
e
r.
d
s
y
ts
H2T options shown:
Tobacco Sunburst (TT)
Mother of Pearl Block Inlays (MP)
2 Coil Splitter Switches (32)
H2
Once again Allan Holdsworth HOLDSWORTH
worked closely with Carvin to create
HF2 Fatboy
the Fatboy. This second generation
Holdsworth design has a 2 3/8” thick
body with special twin beam suspension that allows the top and back
of the body to resonate freely. The
twin beams are not glued in pieces of
wood, but are an integral part of this
design. This along with the maple
neck gives the Fatboy a rich semi-hollow body jazz tone.
HF2 Fatboy FEATURES:
•
•
•
•
•
•
•
•
•
•
•
l
0
0
0
0
0
0
0
Set-in maple wood neck
2 3/8” thick alder semi-hollow body
White birch top and back
Fully rounded body edges
Thicker Holdsworth profiled neck
25.5”scale ebony fingerboard w/ 20” radius
24 jumbo frets .055 tall x .110 wide
Action guaranteed to be 1/16”
Sperzel™ locking tuning keys
Holdsworth design H22 humbuckers
Guitar weight: 6 3/4”lbs.
Fatboy OPTIONS:
HF2 options shown:
Copper Head Metallic (CP)
Gold Hardware (G)
800.854.2235
FTCA AAAA Flamed maple top . . . . . . . $160
QTCA AAAA Quilted maple top . . . . . . . $250
32 Two coil splitting switches . . . . . . . . . $40
For colors & options see page 26 & 27
Allan Holdsworth worked closely
with Carvin for two years developing his Carvin H2 and H2T signature models. The Holdsworth has
many unique design features including the alder wood set-in neck and
chambered semi-hollow body. The
H2 comes standard with a TuneO-Matic bridge. The H2T features
the Wilkinson tremolo system. The
highly resonant tone of this unique
guitar is incredible.
H2 & H2T HOLDSWORTH FEATURES:
•
•
•
•
•
•
•
•
•
•
Set-in alder wood neck
1 3/4” thick alder semi-hollow body
Fully rounded body edges
Thicker Holdsworth profiled neck
25.5”scale ebony fingerboard w/ 20” radius
24 jumbo frets .055 tall x .110 wide
Action guaranteed to be 1/16”
Sperzel™ locking tuning keys
Holdsworth design H22 humbuckers
Guitar weight: 6 1/4” lbs.
HOLDSWORTH OPTIONS:
FTCA AAAA Flamed maple top . . . . . . . $160
QTCA AAAA Quilted maple top . . . . . . . $250
32 Two coil splitting switches . . . . . . . . . $40
For colors & options see page 26 & 27
carvin.com
39
MADE IN
cc275
Semi-Hollow
Craig Chaquico
Signature Acoustic
List $2499
1229
$
CC275-12
12-string Semi-Hollow
Craig Chaquico
Signature Acoustic
List $2699
1299
$
USA
As low as
$30 per month
AC275
Semi-Hollow
Acoustic/Electric
List $2099
999
$
AE185-12
12-string Semi-Hollow
Acoustic/Electric
List $2399
1169
$
AC275-12
AE185
Semi-Hollow
Acoustic/Electric
List $2199
1099
$
As low as
$32 per month
12-string Semi-Hollow
Acoustic/Electric
List $2299
1069
$
AE185-12
50% Off
(FWTA)
(FWPH)
(CTH)
(ABD)
(BB)
(G)
all options, finishes
and case!
Limited Time Offer!
with guitar purchase
The AE185 is a lot
of guitar for the
money–a real price/
performance winner.
I’d even venture to
say the materials and
workmanship are
extraordinary for the
price range. It’s a cool
niche instrument with
an impressive range
of acoustic, electric,
and hybrid colors.
—Joe Gore
Guitar Player Magazine
HC15 $148 $74
Hardshell Black Case for
AC275/CC275
AC275 options shown:
Sunsetburst on Flame (FSUA)
Matching Flame Headstock (FPH)
Carved Top Headstock (CTH)
Abalone Carvin Logo (ABL)
No Inlays on Fingerboard (NIN)
Gold Hardware (G)
HC11 $98 $54
Hardshell ABS Case
HC 12 $148 $74
Hardshell Vintage
Tweed Case
AC275
CC275
The AC275 & CC275 semi-hollow acoustics have the advantage over full sized
acoustics with superior natural acoustic tone when plugged-in, without
feedback or a boomy bottom end. The
CC275 Craig Chaquico signature model
is upgraded with the Eagle inlays,
flame maple top, body binding and
gold hardware.
AC275 FEATURES:
CC275 Craig Chaquico Model
standard features:
Flamed Maple Top, Mother of Pearl Inlayed
Eagle Headstock & Fingerboard,
Body Binding, Gold Hardware
Optional Abalone Eagle Inlays (ABCC) $80
40
800.854.2235
Engleman Spruce top
• AAA
neck-through-body construction
• Mahogany
25”scale
Fingerboard
• StandardEbony
with
•binding dot inlays & without body
Meduim-Jumbo Frets
• 24Traditional
3+3 headstock
• Sperzel™ locking
tuners
• Pickup: LR Baggs ribbon
• Active electronics: Masteracoustic
Separate
• bass and treble boost/cutvolume.
controls
Strings: Elixir NanoWeb™ light gauge bronze
• Neck
at nut: 1 11/16”
• Body width
• thickness: 1 7/8”
AC275 OPTIONS:
CE Cedar top 1/8” thick...............................$20
FTCA AAAA Flamed maple top.................... $160
QTCA AAAA Quilted maple top................... $250
KTA Standard koa top 1/8“ thick................ $150
FKTA Flamed koa top 1/8“ thick................. $250
FWTA Figured Walnut top 1/8“ thick.......... $160
BB Multi-layer tortoise body binding......... $160
For colors & options see page 26 & 27
carvin.com
AE185 options shown:
Claro Walnut Top (FWTA)
Matching Walnut Headstock (FWPH)
Body Binding (BB)
Coil Splitters & Phase Switch (38)
Black Hardware (BC)
AE185
Jump from your favorite lead to an
acoustic sound instantly. The semihollow AE185’s sweet acoustic tone
compliments both the electric &
acoustic realms of this versatile guitar. Each pickup system features it’s
own tone control and output jack.
Send your acoustic and electric signals
to individual amps or out one cable. The
blend control pans between each signal
for custom hybrid tones.
AE185 FeatureS:
(See page 26 for neck through body features)
Engleman Spruce top
• AAA
neck-through-body
• Mahogany
3+3 headstock
• Traditional
Sperzel™ locking tuners
• Pickups:
C22J, C22B & LR Baggs ribbon acoustic
• Active electronics:
Master volume. 3-way selector
• & active tone control
for the electric pickups.
•
•
Separate active tone control for the F60 acoustic
pickup. Pan control to blend between electric &
acoustic pickups. Dual output jacks allow you to
separate the electric and acoustic signals, or combine them into one jack.
Guitar weight: 6 1/4 lbs. Body Thickness: 1 3/4”
Strings: 1046E Elixir NanoWeb™ strings
AE185 OPTIONS:
CE Cedar top 1/8” thick . . . . . . . . . . . . . . . . . . . . . $20
FTCA AAAA Flamed maple top . . . . . . . . . . . . . $160
QTCA AAAA Quilted maple top . . . . . . . . . . . . . $250
KTA Premium Koa top 1/8“ thick . . . . . . . . . . . $150
FKTA Flamed koa top 1/8“ thick . . . . . . . . . . . . $250
FWTA Figured Walnut top 1/8“ thick . . . . . . . . $160
IN Inline headstock . . . . . . . . . . . . . . . . . . . . . . . $30
BB Multi-layer tortoise body binding . . . . . . . $160
38 2 coil taps and 1 phase switch . . . . . . . . . . . . $60
For colors & options see page 26 & 27
ot
e
e/
r.
o
nd
e
he
ol
th
ge
c,
r
c
CL450
As low as
$42 per month
The CL450 is a traditional nylon string
classical guitar with improved tone and
playability over standard full body classicals. The Cedar top is uniquely fan
braced for optimal classic tone both
plugged and unplugged. The natural
tone of the CL450 will please even the
most critical classical guitarist.
NS1
Thin-Line Acoustic
List $2799
1399
$
MADE IN
USA
CL450 FEATURES:
•
•
•
•
•
•
•
•
Steve Oliver
•
•
•
•
•
•
Carvin worked with top
Billboard guitarist,
Steve Oliver for 2
years to develop the
NS1. Steve has been
playing the original
NS1 prototype on the
road and in his studio
for over a year.
CL450
Nylon String Classical
List $2379
1169
$
AAA Cedar top with fan bracing
Mahogany set-in-neck (smooth neck heel)
Mahogany body sides and back (braced)
Multi-Layer Tortoise Body Binding
Ebony Fingerboard with semi-flat 20” radius
25 1/2”scale with 21 Meduim-Jumbo Frets
Pickup: Fishman® Acoustic Matrix
Active electronics Fishman® Prefix™ Pro:
Master volume, 4 band EQ, notch filter,
phase switch and battery status LED.
Strings: Premium 450N classical nylon
Gold Plated Hardware Standard
Gold Carvin Logo on top of headstock
standard
Neck width at nut: 1 7/8”
Body thickness: 2 1/2” • Body width: 14”
Guitar weight: 4 3/4 Lb.
As low as
$34 per month
Felipe Staiti
Enanitos Verdes
CL450
Flamed Koa Top (FKTA)
OPTIONS:
Check out Steve’s demo of the
NS1at Carvin.com/ns1
ESP Engleman Spruce top . . . . . . . N/C
FTCA AAAA Flamed maple top . $160
QTCA AAAAQuilted maple top . . $250
KTA Premium koa top . . . . . . . . $150
FKTA Flamed koa top . . . . . . . . . $250
FWTA Figured Walnut top . . . . . $160
Inlay options not available for CL450
For colors & options see page 26 & 27
50% Off all
options, finishes
and case!
Limited Time Offer!
with guitar purchase
HC 16 $14­­­8 $74
Hardshell Black Case
CL450
Left Handed Model (L)
Bookmatched Koa Top (KTA)
Black Burst Edge (BST)
NS1 Nylon
Synth access
The NS1 Nylon guitar features Carvin’s extraordinary workmanship and playability along with Graph Tech’s outstanding new
synth access pickup system for superb tone and MIDI capabilities. Carvin worked very closely with Graphtech when developing the pickup system for the NS1. The real magic comes when
you plug the NS1 into a guitar synth using a 13 pin cable. This
provides both synth and acoustic sounds, as well as phantom
power using the one 13-pin cable. The NS1 offers the newest
cutting edge technology to bring an awesome sounding acoustic piezo system together with the fastest MIDI access tracking
available.
NS1 FEATURES:
• 4A Flame Maple top with wood body binding effect
• Mahogany neck thru body (smooth neck heel)
• Chambered Mahogany body
• Ebony Fingerboard with semi-flat 20” radius
• 25.5 inch scale with 21 Medium-Jumbo Frets
• Pickup: Graphtech Hexaphonic
• Gold Plated Hardware & Carvin logo
• Neck width at nut: 1 7/8”
• Body thickness: 2”
• Body width: 14”
• Guitar weight: 6 1/2 Lbs.
NS1 options shown:
Ruby Red Stain (FSR4)
Deep Triple Step Stain (DTS)
m-
OPTIONS:
outputs: 1/4 inch acoustic
and 13-pin MIDI compatible
with synth controllers such as
Roland and Axon
Pre-amp electronics
• stacked volumes for Hexaphonic Midi and piezo
• stacked mid cut/boost and mid sweep controls
• stacked treble and bass cut/boost controls
• switch scrolls through MIDI patches
800.854.2235
WK Optional Wooden Knobs . . . . . . $10
QTC4 AAAAQuilted maple top . . . . . $180
FK4 Flame Koa top . . . . . . . . . . . . $180
FWTA Figured Walnut top . . . . . . . . $160
Inlay options not available for NS1
For colors & options see page 26 & 27
carvin.com
41
C780 T
“A fine hand crafted acoustic guitar”
Cobalts are available for
immediate shipment
C980T
• Jumbo cutaway body
• AA solid Spruce top
• Rosewood back & sides
• Satin finish neck
• High gloss body
• Abalone body & sound
hole trim
• Abalone diamond inlays
• Fishman Matrix pickup
• Fishman Prefix Plus-T
• Built-in tuner
• Gold plated Grover tuners
C980T12
• 12 string model
list $1839
$919
• Jumbo cutaway body
• AA solid Spruce top
• Mahogany back & sides
• Satin finish neck
• High gloss body
• Fishman Matrix pickup
• Fishman Prefix Plus
• Built-in tuner
OPTIONS
• C780TS Satin finish
list $1339
$669
list $1739
$869
F i s h m a n
Prefix Plus-T
pickup and
preamp for
superb electric tone. Now
with built-in
guitar tuner
Microchip
see pg 24
C980TMW
same as C980 except
•Maple back and sides
• Gloss Black Finish
see Mark Wills photo below
list $1739
$869
Carvin is proud to offer the Cobalt Series of acoustic guitars.
These fine acoustics are carefully hand-crafted overseas to our
strict and exact specifications. Premium selected woods and
the Cobalt’s special X-bracing yields a sweet acoustic tone with
superb depth and brilliance. The Rapid Play™ low-action
neck provides unmatched comfort and playability. The single
cut-away models feature the Fishman® Matrix™ pickup and
Prefix Plus™ preamp for awesome flexibility–plugged or
unplugged. Many will be hard pressed to find another
acoustic that plays, sounds and offers the same high-end
quality and features at an equivalent price.
Carvin Cobalt Series Acoustics Feature:
• AA grade premium selected woods
• Dreadnought body models (20” long x 15.5” wide)
• Jumbo body models (20” long x 16.25” wide)
• Special X-bracing for clear tone & resonance
• Solid Mahogany neck with smooth Satin finish
P
• Dovetail neck joint for superior sustain
• Bound Rosewood headstock with inlayed Carvin logo
• Bound 25.4” scale Rosewood fingerboard
• Rapid Play™ low action neck w/ adjustable truss rod
Rapid Play™
• 20 medium .078” wide x .043” tall acoustic frets
• Ebony bridge pins with Abalone inlays
• Upper and Lower body strap buttons
• Grover™ chrome tuners
• Precise Carvin set-up & intonation
HC22
Jumbo
Hardshell case
50% OFF case
with guitar purchase
LIMITED TIME OFFER
Platinum selling & ACM award
winner Mark Wills with his
Gloss Black C980MW
See Mark on the Carvin DVD
carvin.com/DVD
42
Colorful Abalone
surrounds the body
edges and sound hole
$118
$59
5 Year Warranty
All Carvin Cobalt guitars carry a 5 year limited
warranty against manufacturing defects.
800.854.2235
carvin.com
Custom Shop options not available on Cobalt Series
C
a
f
As low as
$15 per month
C250
• Dreadnought body
• AA solid Spruce top
• Mahogany back & sides
• Satin finish neck
• High gloss body
Left hand
model
Available
OPTIONS
• C250LH left hand with
satin body and neck
C250S
C350
• Dreadnought body
• AA solid Cedar top
• Mahogany back & sides
• Satin finish neck
• Satin finish body
• Dreadnought body
• Solid Mahogany top
• Mahogany body
• Satin finish neck
• High Gloss body
list $899
$449
list $919
$459
list $899
$449
GB80
Acoustic Guitar Gig Bag
$
37
HC21
Dreadnought
Hardshell case
$118
$59
FREE SHIPPING
C850 T
• Dreadnought body
with Cutaway
• AA solid Spruce top
• Rosewood back & sides
• Satin finish neck
• High gloss body
• Abalone sound hole
purfling
• Fishman Matrix pickup
• Fishman Prefix Plus
• Built-in tuner
C750T
• Dreadnought body
with Cutaway
• AA solid Spruce top
• Mahogany back & sides
• Satin finish neck
• High gloss body
• Fishman Matrix pickup
• Fishman Prefix Plus
• Built in tuner
Premium Mahogany
body & neck.
OPTIONS
• C750TS Satin finish
list $1319
$659
od
Left hand
model
Available
OPTIONS
• C850TLH left hand model
list $1479
$739
Rapid Play™ Logo for Carvin 04/05/01
balt Series
Cutaway body for easy
access beyond the 17th
fret (C750, C850 , C780
& C980 )
The Rapid Play™
neck provides low
action easy playing.
800.854.2235
carvin.com
43

Similar documents

USA - Carvin Guitars

USA - Carvin Guitars • Smooth neck-to-body heel for effortless playability to the last fret • Tone enhancing alder wood body sides (all thin acoustics use mahogany) • Premium grade Ebony fingerboard • Precision medium-...

More information

5 Year Warranty - Carvin Guitars

5 Year Warranty - Carvin Guitars • Smooth neck-to-body heel for effortless playability to the last fret • Tone enhancing alder wood body sides (all thin acoustics use mahogany) • Premium grade Ebony fingerboard • Precision medium-...

More information