SGY-PM900 - Pioneer cyclesports
Transcription
SGY-PM900 - Pioneer cyclesports
pedaling monitor sensor SGY-PM900 World first* measurement of "force" and "direction of force" every 30˚ of rotation * 113 W ■Measurement of "force" and "direction of force" every 30̊ of rotation The "SGY-PM 900" is the first system to measure and display results for every 30̊ of pedaling rotation. By detecting minute changes in strain on the crank every 30̊ during pedaling, the "SGY-PM 900" measures "force" and "direction of force" in 12 locations per cycle . With this data, analyze the unique characteristics of your pedaling, and quantify your performance as a "Pedaling Efficiency" value. ■With this data, analyze the unique characteristics of your pedaling, and quantify your performance as a "Pedaling Efficiency" value. pedaling monitor sensor SGY-PM900 Independent sensors on the left and right sides measure "force" and "direction of force" from the left leg and right leg separately, each in 12 different locations per cycle. The independent left and right sensors are installed on the inner side of the crank arm, enabling independent measurement of "force" and "direction of force" on the left and right sides. Left sensor unit Right sensor unit Magnet ring Magnet sensor Transmitter (sensor unit) A magnet ring installed on the Bottom Bracket contains magnets in 12 different locations. The device detects the magnets with a magnetism sensor, accurately measuring "force" and "direction of force" every 30̊ pedaling monitor sensor SGY-PM900 High-accuracy measurement under various temperature conditions and durability/water-resistance tested in real use High-accuracy measurement even under harsh conditions Durability and water-resistance tested by top athletes in real use Operates in ‒10℃ to +50℃ ■Reliable measurement on rough roads The "SGY-PM 900" operates even under -10℃ to 50℃ temperatures. In any environment that athletes endure, the "SGY-PM 900" can make stable measurements.Zero-point calibration, necessary for accurate measurement, can be accomplished simply and quickly. After being calibrated several times, the sensor will learn the characteristics of the environment and automatically respond to changes in temperature. ■Easy zero-point calibration, ■IPX6 proven ■200-hour battery water resistance (under normal temperatures) * IEC-standard water resistance One CR2032 battery each on left and right, easily exchangeable Specifications pedaling monitor sensor SGY-PM900 ● Independent strain sensors for the left and right sides, highly precise sensing of minute changes on the crank at every 30 degrees ● Measures the force placed on the crank and loss component * for each 30 degrees of rotation ● The wirelessly transmitted data can be displayed on the cycle computer every second * Loss component : This is the power applied in the direction opposite to crank rotation and the power applied in the radial direction. pedaling monitor sensor pedaling monitor sensor SGY-PM900H90 SGY-PM900H79 (For SHIMANO FC-9000) Weight Battery 73g [Pedaling monitor sensor (right side)] W×H×D(mm) External dimensions [Pedaling monitor sensor (left side)] W×H×D(mm) [Magnet ring] (mm) (For SHIMANO FC-7900/7950) Weight CR2032 ・Right transmitter: 60.7×46.9×21.6 Battery operating time* ・Junction box, Strain gauge unit cover: 63.3×47.2×9.9 Guaranteed operationaltemperature range ー10 to 50℃ Accessories Magnet ring, Magnet ring attachment for Hollowtech II, Batteries (CR2032), Cable ties, Phillips-head screws, User’ s Manual, Important Information for the User, Warranty Card 99.4×48.2×14.6 2 φ57.0× 3.5 Water-resistance IPX6 Communications system(sensors) ANT+ TM * 1 Implemented crank standard Approximately 200 hours (normal temperature) SHIMANO FC-9000 External dimensions 72g ・Right transmitter: 60.7×46.9×20.1 W×H×D(mm) ・Junction box, Strain gauge unit cover: 63.2×36.8×9.9 [Pedaling monitor sensor (left side)] W×H×D(mm) [Magnet ring] (mm) 100.0×40.7×15.7 Battery operating time* 2 Water-resistance IPX6 ANT+ TM *1standard Approximately 200 hours (normal temperature) Guaranteed operationaltemperature range ー10 to 50℃ Accessories Magnet ring, Magnet ring attachment for Hollowtech II, Batteries (CR2032), Cable ties, Phillips-head screws, User’ s Manual, Important Information for the User, Warranty Card Implemented crank SHIMANO FC-7900/7950 φ57.0× 3.5 Communications system(sensors) CR2032 Battery [Pedaling monitor sensor (right side)] ■Compatible Bottom Brackets The Pedaling Monitor is compatible with 4 types of Bottom Bracket *3; SHIMANO HOLLOWTECH II, BB86, BB30 and PF30. For HOLLOWTECH II the standard SHIMANO Bottom Bracket(BB9000、BB7900、BB6700)may be used, but for BB86, BB30 and PF30 the Bottom Bracket must be replaced with our specific Bottom Bracket Option Parts. These Option Parts are available with Steel or Ceramic Bearings. BB86 Pedaling Monitor Sensor Bottom Bracket Adapter (For BB86/Steel Bearings) SGY-BB86 Pedaling Monitor Sensor Bottom Bracket Adapter (For BB86/Ceramic Bearings) SGY-BB86C BB30 Pedaling Monitor Sensor Bottom Bracket Adapter (For BB30/Steel Bearings) SGY-BB30 Pedaling Monitor Sensor Bottom Bracket Adapter (For BB30/Ceramic Bearings) SGY-BB30C PF30 Pedaling Monitor Sensor Bottom Bracket Adapter (For PF30/Steel Bearings) SGY-BBPF30 Pedaling Monitor Sensor Bottom Bracket Adapter (For PF30/Ceramic Bearings) SGY-BBPF30C *1 : ANT+™ is a low-powered wireless communications standard using the 2.4GHz range. *2 : The battery operating time may decrease depending on the operating conditions. *3 : Compatibility with a specific Bottom Bracket does not guarantee compatibility with all frames using that Bottom Bracket. Please consult you dealer. • Specifications and design are subject to change without notice. • Crank is not included.