Orthognathic Modular Fixation System Brochure

Orthognathic Modular Fixation System Brochure

A modular system that
may be customized for
orthognathic procedures
Original Instruments and Implants of the Association
for the Study of Internal Fixation — AO ASIF
Orthognathic Modular Fixation System–
Create a custom system
Orthognathic Graphic Case
2–Module [690.010]
4–Module [690.603]
The Graphic Cases will accommodate
either the Standard Screwdriver Instrument
Tray or the Ratcheting Screwdriver Instrument
Tray and two or four modules (ordered separately).
Instrument Trays
Choice of Standard Screwdriver or Ratcheting Screwdriver Instrument Tray provides additional system flexibility.
Standard Screwdriver
Instrument Tray
Ratcheting Screwdriver
Instrument Tray
[690.011]
[690.015]
Non-specific instrument
tray areas (without part
numbers) allow flexibility
in instrument selection.
Orthognathic Plate Module [304.711]
Orthognathic Plate Module is designed with generic compartments to accommodate a large variety of plates.
Autoclavable adhesive labels
provide compartment
identification.
Orthognathic Pre-Bent
Plate Module [304.712]
Orthognathic Screw
Module [304.710]
Orthognathic Screw Module houses screws
from 1.3 mm to 2.4 mm in diameter
White screw length
marker denotes
self-drilling screws
Orthognathic Pre-Bent
Plate Module has
etched compartments for the pre-bent plates
and generic compartments to accommodate
a variety of other plates
Black screw length
marker denotes
self-tapping screws
1
Graphic Case and Instrument Trays
The Orthognathic Instrument Trays are designed to hold a variety of Synthes instruments. The sample
instrument selections* are based on a 1.5 mm/2.0 mm system with 2.4 mm position screws.
Standard Screwdriver Instrument Tray [690.011]
Orthognathic Graphic Case
2–Module [690.010]
4–Module [690.603]
The Graphic Cases will accommodate
either the Standard Screwdriver
Instrument Tray or the Ratcheting
Screwdriver Instrument Tray and two
or four modules (ordered separately).
Ratcheting Screwdriver Instrument Tray [690.015]
The Standard Screwdriver and Ratcheting Screwdriver Instrument Trays
are each designed to accommodate:
Trocar Systems–choose one Trocar System:
Trocar Drill Bits, quick coupling
Universal Trocar System
(tray will hold two of each)
397.211
397.232
317.875
317.876
317.877
317.878
Universal Trocar Handle
Malleable C-Retractor
2.4 mm Accessories
397.212
397.262
397.23
397.22
OR
Cannula and Obturator
1.8 mm Drill Guide
Cheek Retractor Ring
Cheek Retractor Blade
2.0 mm Accessories
397.213
397.216
397.43
397.42
Cannula and Obturator
1.5 mm Drill Guide
Cheek Retractor Ring
Cheek Retractor Blade
Plate Holding Trocar System
397.310
397.312
397.313
397.317
397.325
Trocar Handle
2.0 mm Plate Holder
Cheek Retractor Blade
Removable Metal Point
1.5 mm Drill Guide
Drill Bits, Stryker J-latch (tray will hold
1.5 mm, with 6 mm stop, 100 mm*
1.5 mm, 100 mm, 8–18 mm calibration*
1.8 mm, with 6 mm stop, 100 mm*
1.8 mm, 100 mm, 8–18 mm calibration*
Depth Gauge
319.007
Depth Gauge for 2.0 mm and 2.4 mm screws, long*
Plate Holding Forceps (tray will hold three)
347.98
348.98
399.001
For 1.0 mm – 2.4 mm plates*
Locking, for 1.0 mm and 1.3 mm plates*
Locking, for 1.5 mm and 2.0 mm plates*
Double Drill Sleeves (tray will hold two)
312.14.96
312.18
319.134
1.5 mm/1.1 mm*
2.4 mm/1.8 mm*
1.3 mm/1.0 mm
two of each, or other comparably sized drill bits)**
310.512
317.335
317.835
1.8 mm, 100 mm*
1.1 mm, 110 mm*
1.5 mm, 110 mm*
Benders and Cutters (tray will hold three)**
347.964
391.965
329.14
2
* Shown in sample set configuration photos
** Additional instruments available, see SYNTHES Maxillofacial catalog.
391.98
Combination Bending Pliers,
for 1.0 mm–2.0 mm plates*
Combination Bending/Cutting Pliers,
for 1.0 mm–2.0 mm plates*
Universal Bending Pliers, for 1.0 mm–2.0 mm plates
(two required)
Plate Cutter, for 1.0 mm–2.0 mm plates*
INSTRUMENT TRAYS
Standard Screwdriver Instrument Tray [690.011]
Note: Contents not included, must be ordered separately.
The Standard Screwdriver Instrument Tray will also accommodate:
Handles
311.43
311.01.98
Handle with quick coupling*
Handle with mini quick coupling, large (holds two)*
Cruciform Screwdrivers (tray will hold two)
313.925
313.94
313.95
313.96
2.4 mm, self retaining*
2.4 mm, with Holding Sleeve*
1.5 mm/2.0 mm
2.4 mm
Cruciform Screwdriver Blades,
with holding sleeve, mini quick coupling
314.411
314.67
314.68
1.3 mm, (holds two)*
1.5 mm/2.0 mm, short (holds two in auxiliary bin)
1.5 mm/2.0 mm, long (holds two in auxiliary bin)
Cruciform Screwdriver Blades,
self-retaining, wedge, mini quick coupling
(tray will hold two each of two different blades)
313.916
313.922
313.923
1.3 mm
1.5 mm/2.0 mm, short*
1.5 mm/2.0 mm, long*
StarDrive Screwdriver Blades, self-retaining,
mini quick coupling
(tray will hold two each of two different blades)
313.822
313.821
313.832
313.851
313.833
313.842
313.854
313.843
1.3 mm, short
1.3 mm, medium
1.5 mm, short*
1.5 mm, medium
1.5 mm, long*
2.0 mm, short*
2.0 mm, medium
2.0 mm, long*
Taps, mini quick coupling
311.120
311.15
311.19
311.206
311.21.98
For 1.3 mm Cortex Screws
For 1.5 mm Cortex Screws
For 2.0 mm Cortex Screws*
For 2.0 mm Coarse Pitch Screws
For 2.0 mm Cortex Screws, long
Taps, quick coupling
311.23
311.24
For 2.4 mm Cortex Screws*
For 2.4 mm Cortex Screws, long
Countersinks, with centering pins, quick coupling
310.80
310.81
For 2.4 mm Cortex Screws*
For 1.5 mm, 2.0 mm, and 2.7 mm screws*
* Shown in sample set configuration photos
3
Ratcheting Screwdriver Instrument Tray [690.015]
Note: Contents not included, must be ordered separately.
The Ratcheting Screwdriver Instrument Tray will also accommodate:
311.014
Ratcheting Screwdriver Body
(requires 311.016 or 311.017, holds two)*
Handles
311.016
311.017
Small, for Ratcheting Screwdriver Body*
Large, for Ratcheting Screwdriver Body*
Cruciform Screwdriver Blades, self-retaining,
hex coupling (tray will hold three each of three different blades)
313.917
313.935
313.936
313.928
1.3 mm
1.5 mm/2.0 mm, short
1.5 mm/2.0 mm, long
2.0 mm/2.4 mm*
Cruciform Screwdriver Blade, hex coupling
313.939
313.97
2.4 mm/3.0 mm*
Holding Sleeve for 313.939*
* Shown in sample set configuration photos
4
StarDrive Screwdriver Blades, self-retaining,
hex coupling (tray will hold two each of four different blades)
313.827
313.825
313.837
313.852
313.838
313.847
313.855
313.848
1.3 mm, short
1.3 mm, medium
1.5 mm, short*
1.5 mm, medium
1.5 mm, long*
2.0 mm, short*
2.0 mm, medium
2.0 mm, long*
Taps, hex coupling
311.209
311.211
311.241
For 2.0 mm Coarse Pitch screws
For 2.0 mm Cortex screws*
For 2.4 mm Cortex screws*
310.883
Countersink for 2.0 mm and 2.4 mm screws,
hex coupling*
The Orthognathic Screw Module is designed to hold a variety of Synthes Maxillofacial screws.
Module
304.710
Includes:
304.710S1
Orthognathic Screw Module
Label Sheet for Orthognathic Screw Module
(two each)
Optional Contents
Screw Length Marker Kits –see SYNTHES Maxillofacial catalog
for complete line of Screw Length Marker Kits
1.3 mm
SCREW MODULE
Orthognathic Screw Module [304.710]
2.0 /2.4 mm
1.3 mm Titanium Cortex Screws, self-drilling,
with StarDrive recess (5/pkg.)
400.124–400.126
4 mm– 6 mm (1 mm increments)
1.3 mm Titanium Cortex Screws, self-tapping,
with StarDrive recess (5/pkg.)
400.333–400.342
3 mm– 12 mm (1 mm increments)
400.344–400.348
14 mm– 18 mm (2 mm increments)
1.3 mm Titanium Cortex Screws, self-tapping,
with cruciform recess (5/pkg.)
400.623–400.632
3 mm–12 mm (1 mm increments)
400.634–400.638
14 mm–18 mm (2 mm increments)
1.5 mm
2.0 mm
Note: Contents not included, must be ordered separately.
1.7 mm Emergency Screws,
with StarDrive recess (5/pkg.)
400.143–400.152
3 mm– 12 mm (1 mm increments)
400.154–400.158
14 mm– 18 mm (2 mm increments)
1.7 mm Titanium Emergency Screws,
with cruciform recess (5/pkg.)
400.653–400.662
3 mm–12 mm (1 mm increments)
400.664–400.668
14 mm–18 mm (2 mm increments)
2.0 mm Titanium Cortex Screws, self-tapping,
with cruciform recess (5/pkg.)
401.154–401.162
4 mm–12 mm (1 mm increments)
401.164–401.168
14 mm–18 mm (2 mm increments)
1.5 mm Titanium Cortex Screws, self-drilling,
with StarDrive recess (5/pkg.)
400.754–400.758
4 mm–8 mm (1 mm increments)
2.4 mm Titanium Emergency Screws,
with StarDrive recess (5/pkg.)
401.386–401.392
6 mm–12 mm (1 mm increments)
401.394–401.398
14 mm–18 mm (2 mm increments)
1.5 mm Titanium Cortex Screws, self-tapping
with StarDrive recess (5/pkg.)
400.354–400.362
4 mm– 12 mm (1 mm increments)
400.364–400.368
14 mm– 18 mm (2 mm increments)
2.4 mm Titanium Emergency Screws,
with cruciform recess (5/pkg.)
401.306–401.312
6 mm–12 mm (1 mm increments)
401.314–401.318
14–18 mm (2 mm increments)
1.5 mm Titanium Cortex Screws, self-tapping,
with cruciform recess (5/pkg.)
400.734–400.742
4 mm–12 mm (1 mm increments)
400.744–400.748
14 mm–18 mm (2 mm increments)
2.4 mm Titanium Cortex Screws, self-tapping,
with cruciform recess (5/pkg.)
401.506–401.518
6 mm–18 mm (2 mm increments)
2.0 mm Titanium Emergency Screws,
with StarDrive recess (5/pkg.)
400.254–400.262
4 mm–12 mm (1 mm increments)
400.264–400.268
14 mm–16 mm (2 mm increments)
2.0 mm Titanium Emergency Screws,
with cruciform recess (5/pkg.)
400.784–400.792
4 mm–12 mm (1 mm increments)
400.794–400.798
14 mm–18 mm (2 mm increments)
2.0 mm Titanium Cortex Screws, self-drilling,
with StarDrive recess (5/pkg.)
401.134–401.138
4 mm–8 mm (1 mm increments)
2.0 mm Titanium Cortex Screws, self-tapping,
with StarDrive recess (5/pkg.)
401.354–401.362
4 mm–12 mm (1 mm increments)
401.364–401.368
14 mm–18 mm (2 mm increments)
2.7 mm Titanium Emergency Screws,
with cruciform recess (5/pkg.)
401.558–401.568
8 mm–18 mm (2 mm increments)
2.0 mm Titanium Cortex Screws, coarse pitch,
self-tapping, with cruciform recess (5/pkg.)
401.934–401.942
4 mm–12 mm (1 mm increments)
401.944–401.948
14 mm–18 mm (2 mm increments)
1.0 mm Drill Bit, Stryker J-latch, with stop*
316.446–316.448
4 mm–8 mm (2 mm increments)
1.1 mm Drill Bit, Stryker J-latch, with stop*
317.14–317.18
4 mm–8 mm (2 mm increments)
317.22
12 mm
1.5 mm Drill Bit, Stryker J-latch, with stop*
317.64–317.68
4 mm–8 mm (2 mm increments)
317.72
12 mm
* Additional instruments available, see SYNTHES Maxillofacial catalog.
5
Orthognathic Plate Module [304.711]
The Orthognathic Plate Module is designed with compartments to hold a variety of Synthes Maxillofacial plates.
The sample plate configurations are based on a 1.5 mm/2.0 mm system with 2.4 mm position screws.
Module
304.711
Orthognathic Plate Module
Includes:
304.711S1 Label Sheet for Orthognathic Plate Module (2 each)
Optional Contents
Plate Selection
Compartment
Options**
Titanium Oblique L-Plates
421.050
421.051
421.052
421.053
1.3 mm, 3 x 3 holes, left
1.3 mm, 3 x 3 holes, right
1.3 mm, 3 x 4 holes, left
1.3 mm, 3 x 4 holes, right
A, B, C, F
A, B, C, F
A, B, C, F
A, B, C, F
446.50
446.51
446.52
446.53
446.792
446.793
446.794
446.795
1.5 mm, 2 x 3 holes, left *
1.5 mm, 2 x 3 holes, right*
1.5 mm, 3 x 4 holes, left*
1.5 mm, 3 x 4 holes, right*
1.5 mm, 2 x 2 holes, short, right*
1.5 mm, 2 x 2 holes, short, left*
1.5 mm, 2 x 2 holes, long, right*
1.5 mm, 2 x 2 holes, long, left*
A, B, C, F
A, B, C, F
B, C, F
B, C, F
A, B, C, F
A, B, C, F
A, B, C, F
A, B, C, F
447.50
447.51
447.52
447.53
447.54
447.55
447.556
447.557
447.558
447.559
2.0 mm, 2 x 3 holes, left*
2.0 mm, 2 x 3 holes, right*
2.0 mm, 3 x 4 holes, left*
2.0 mm, 3 x 4 holes, right*
2.0 mm, 4 x 6 holes, left
2.0 mm, 4 x 6 holes, right
2.0 mm, 2 x 2 holes, short, right*
2.0 mm, 2 x 2 holes, short, left*
2.0 mm, 2 x 2 holes, long, right*
2.0 mm, 2 x 2 holes, long, left*
B, C, F
B, C, F
C, F
C, F
L
L
A, B, C, F
A, B, C, F
A, B, C, F
A, B, C, F
Titanium Oblique L-Plates, malleable
446.515
446.516
446.527
446.537
446.782
446.783
446.784
446.785
1.5 mm, 2 x 3 holes, right*
1.5 mm, 2 x 3 holes, left*
1.5 mm, 3 x 4 holes, left
1.5 mm, 3 x 4 holes, right
1.5 mm, 2 x 2 holes, short, right
1.5 mm, 2 x 2 holes, short, left
1.5 mm, 2 x 2 holes, long, right*
1.5 mm, 2 x 2 holes, long, left*
A, B, C, F
A, B, C, F
B, C, F
B, C, F
A, B, C, F
A, B, C, F
A, B, C, F
A, B, C, F
447.515
447.516
447.527
447.537
447.546
447.547
447.548
447.549
2.0 mm, 2 x 3 holes, right*
2.0 mm, 2 x 3 holes, left*
2.0 mm, 3 x 4 holes, left
2.0 mm, 3 x 4 holes, right
2.0 mm, 2 x 2 holes, short, right
2.0 mm, 2 x 2 holes, short, left
2.0 mm, 2 x 2 holes, long, right*
2.0 mm, 2 x 2 holes, long, left*
B, C, F
B, C, F
C, F
C, F
A, B, C, F
A, B, C, F
A, B, C, F
A, B, C, F
* Shown in sample set configuration photos
** Colored text indicates compartment location of featured product
6
Note: Contents not included, must be ordered separately.
Plate Selection
Compartment
Options**
Titanium Maxillary L-Plates
446.504
446.505
446.506
446.507
446.508
446.509
1.5 mm, 3 x 3 holes, 22 mm, right
1.5 mm, 3 x 3 holes, 22 mm, left
1.5 mm, 3 x 3 holes, 24 mm, right
1.5 mm, 3 x 3 holes, 24 mm, left
1.5 mm, 3 x 3 holes, 26 mm, right
1.5 mm, 3 x 3 holes, 26 mm, left
A, B, C, F
A, B, C, F
B, C, F
B, C, F
B, C, F
B, C, F
447.040
447.041
447.042
447.043
447.044
447.045
2.0 mm, 3 x 3 holes, 25 mm, right
2.0 mm, 3 x 3 holes, 25 mm, left
2.0 mm, 3 x 3 holes, 27 mm, right
2.0 mm, 3 x 3 holes, 27 mm, left
2.0 mm, 3 x 3 holes, 29 mm, right
2.0 mm, 3 x 3 holes, 29 mm, left
B, C, F
B, C, F
B, C, F
B, C, F
C, F
C, F
E
E
E
PLATE MODULE
Orthognathic Plate Module [304.711] (continued)
E
G
G
K
F
F
F
F
F
F
F
F
A
L
I
J
J
J
J
D
A
B
H
D
B
B
C C
B
D
A
A
B
D
B
B
C C
D
B
D
D
D
Optional Contents (continued)
Plate Selection
Compartment
Options**
2.0 mm Titanium Chin Plates
447.070
Straight, 4 holes, 3 mm offset
447.071
Straight, 4 holes, 5 mm offset
447.072
Straight, 4 holes, 8 mm offset
447.073
Double Bend, 5 holes, 4 mm offset*
447.074
Double Bend, 5 holes, 6 mm offset*
447.075
Double Bend, 5 holes, 8 mm offset*
447.076
Double Bend, 5 holes, 10 mm offset*
447.077
Single Bend, 5 holes, 3 mm–5 mm offset
447.078
Single Bend, 5 holes, 6 mm–8 mm offset
447.079
Single Bend, 5 holes, 9 mm–11 mm offset
447.146
Double Bend, 4 holes, 6 mm offset, right
447.147
Double Bend, 4 holes, 6 mm offset, left
447.148
Double Bend, 4 holes, 8 mm offset, right
447.149
Double Bend, 4 holes, 8 mm offset, left
447.150
Double Bend, 4 holes, 10 mm offset, right
447.151
Double Bend, 4 holes, 10 mm offset, left
Plate Selection
Compartment
Options**
2.0 mm Titanium Sagittal Split Plates
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
E, F
447.030
447.033
447.034
447.035
447.036
447.037
447.038
447.039
447.082
447.083
447.084
447.114
447.116
Curved, 6 holes, 14 mm bar
Curved, low profile, 6 holes, 4 mm bar*
Curved, low profile, 6 holes, 8 mm bar*
Curved, 6 holes, 4 mm bar
Curved, 6 holes, 12 mm bar
Curved, low profile, 6 holes, 12 mm bar*
Curved, 6 holes, 8 mm bar
Curved, 6 holes, 16 mm bar
Strut, 8 holes*
Curved, 10 holes, 38 mm
Straight, 4 holes, 30 mm*
With adjustable slider, 33 mm*
With adjustable slider, 40 mm*
G, H
G, H, I, J
G, H, I, J
G, H, I, J
G, H, I, J
G, H, I, J
G, H, I, J
G, H
G, H, I, J
G, H
G, H, I, J
G, H, I, J
G, H
* Shown in sample set configuration photos
** Colored text indicates compartment location of featured product
7
Orthognathic Plate Module [304.711] (continued)
Optional Contents (continued)
Plate Selection
Compartment
Options**
Titanium Adaption Plates
421.010
1.3 mm, 24 holes, 95 mm
446.10
1.5 mm, 20 holes, 90 mm*
446.101
1.5 mm, 20 holes, 90 mm, low profile
447.10
2.0 mm, 20 holes, 100 mm
1.5 mm, 20 holes, 90 mm
2.0 mm, 20 holes, 100 mm
K
K
Titanium T-Plates
421.071
446.090
446.091
1.3 mm, 3 x 4 holes
1.5 mm, 4 x 7 holes*
1.5 mm, 4 x 7 holes, malleable
Compartment
Options**
Titanium Z-Plates
K
K
K
K
Titanium Adaption Plates, malleable
450.101
451.101
Plate Selection
F
G
G
Titanium Y-Plates
421.061
1.3 mm, 1 x 3 holes
F
446.61
446.611
1.5 mm, 1 x 3 holes
1.5 mm, 1 x 3 holes, low profile
F
F
447.61
447.62
2.0 mm, 1 x 3 holes
2.0 mm, 2 x 4 holes
F
F
446.796
446.797
446.798
446.799
1.5 mm, short, right*
1.5 mm, short, left*
1.5 mm, long, right*
1.5 mm, long, left*
D, F
D, F
D, F
D, F
447.562
447.563
447.564
447.565
2.0 mm, short, right*
2.0 mm, short, left*
2.0 mm, long, right*
2.0 mm, long, left*
D, F
D, F
D, F
D, F
Titanium Z-Plates, malleable
446.786
446.787
446.788
446.789
1.5 mm, short, right
1.5 mm, short, left
1.5 mm, long, right
1.5 mm, long, left
D, F
D, F
D, F
D, F
447.572
447.573
447.574
447.575
2.0 mm, short, right
2.0 mm, short, left
2.0 mm, long, right
2.0 mm, long, left
D, F
D, F
D, F
D, F
Titanium Y-Plates Plates, malleable
450.611
451.611
1.5 mm, 1 x 3 holes,
2.0 mm, 1 x 3 holes,
F
F
Orthognathic Pre-Bent
Plate Module [304.712]
1.5 mm Titanium Pre-Bent Maxillary Plates
(can be stored in the Orthognathic Plate Module for
Titanium Pre-Bent Plates [304.712] or in the Auxiliary Bin
of the Orthognathic Plate Module [304.711]
446.042
446.043
446.044
446.045
446.046
446.047
446.048
446.049
446.060
446.061
3 mm advancement, right
3 mm advancement, left
5 mm advancement, right
5 mm advancement, left
7 mm advancement, right
7 mm advancement, left
9 mm advancement, right
9 mm advancement, left
11 mm advancement, right
11 mm advancement, left
L
L
L
L
L
L
L
L
L
L
* Shown in sample set configuration photos
** Colored text indicates compartment location of featured product
8
Orthognathic Pre-Bent
Plate Module has
etched compartments for the pre-bent plates
and generic compartments to accommodate
a variety of other plates
GRAPHIC CASE AND MODULES
Sample Configuration
Standard Screwdriver
Instrument Tray
[690.011]
Orthognathic
Graphic Case [690.010]
Orthognathic Screw Module
[304.710]
Orthognathic Plate Module
[304.711]
9
SYNTHES Maxillofacial
SYNTHES (CANADA) LTD.
1690 Russell Road
Paoli, PA 19301-1262
Telephone: (610) 647-9700
Fax: (610) 251-9056
To order: (800) 523-0322
2566 Meadowpine Boulevard
Mississauga, Ontario L5N 6P9
Telephone: (905) 567-0440
Fax: (905) 567-3185
To order: (800) 668-1119
© SYNTHES Maxillofacial 2000
SYNTHES and ASIF are registered trademarks of SYNTHES (USA) and SYNTHES AG Chur.
Printed in U.S.A. GP1431-E 10/03 J2962-E