bda part number definition

Transcription

2014
2
H
erein, please find our current and up-to-date product catalog. It has been developed as
comprehensive and as user-friendly as possible. Therefore, we have depicted highly
demanded solutions along with various options to satisfy your application.
The list includes Indoor/Outdoor Bi-Directional Amplifiers, One Way Amplifiers, Downlink
Signal Boosters, Line Extenders and Fiber Links. Accessories include Filters,
Diplexers/Duplexers, Cross-Band Couplers, Directional Couplers, Antennas and
Splitters/Combiners.
G-Way/G-Wave distinguishes itself from other manufacturers by quickly responding to specific
customer requirements. Our engineering team can provide variations of any unit (i.e. more/less
power, more/less gain, DC back-up options, internal/external filtering various
enclosure/mounting types including 19” rack mount, wall mount and NEMA 4). Please contact
us if you or your customer has a request that is not included in this catalog.
Take advantage of the Extended Warranty Program. See page 5 for more information. For more information on accessories (including filters, diplexers/duplexers, cross-band/directional couplers, antennas, combiners and splitters)
3
Table of Contents
Important Notice…………………………………………………………………………...
4
Extended Warranty Options………………………………………………………………
5
Part Number Definition - BDAs….……………………………………………………….
6
Enclosure Definition - BDAs……………………………………………………………...
7
Master List of Options…………………………………………………………………….
8
Public Safety BDAs: Single & Dual Bands 0.5 – 50 Watts……………………………
9-18
Enterprise BDAs: 0.5 – 50 Watts…………………………………………………………
19-27
UHF/ Tetra/ CDMA450 BDAs…………………………………………………………….
28-31
VHF…………………………………………………………………………………………
32
Dual Band BDAs…………………………………………………………………………..
33-39
Enterprise Fiber Booster Links…………………………………………………………...
40
LightLink – Fiber DAS for Public Safety…………………………………………………
41
Paging BDAs: 0.5 – 25 Watt……………………………………………………………...
42-50
Paging Fiber Booster Links……………………………………………………………….
51
Downlink Boosters…………………………………………………………………………
52
Paging Downlink Booster…………………………………………………………………
53
Line Extender………………………………………………………………………………
54
Paging Line Extender……………………………………………………………………..
55
Part Number Definition – One Way Amplifiers………………………………………….
56
Enclosure Definition – One Way Amplifiers…………………………………………….
57
One Way Fiber Booster Links……………………………………………………………
58
Paging One Way Fiber Booster Links…………………………………………………..
59
One-Way Amplifiers……………………………………………………………………….
60
Paging One Way Amplifiers………………………………………………………………
61
Accessories…………………………………………………………………………………
62-65
Filters, Diplexers, Duplexers, Cross-band Couplers, Splitters/ Combiners, Directional Couplers and Antennas
Terms & Conditions……………………………………………………………………….
66-67
Take advantage of the Extended Warranty Program. See page 5 for more information. For more information on accessories (including filters, diplexers/duplexers, cross-band/directional couplers, antennas, combiners and splitters), visit: www.gwaymicrowave.com.
38 Leuning Street, South Hackensack, NJ 07606 I T: 201.343.6388 I F: 201.343.6390 I W: www.gwaverf.com I E: [email protected] 4
ImportantNotice–PleaseRead
•
Typically, lead time is 2-3 weeks ARO for single units.
•
If delivery is required prior to the time quoted, expedited delivery incurs an additional
10% surcharge. Please call to confirm, if this option is available.
Excludes products available from stock.
•
All systems are built to order, therefore, are “Non-Cancelable and Non-Returnable:”
If you are unsure of the exact requirements of your customer, please download and complete the
questionnaire, obtainable from our website: www.gwaverf.com. Technical staff is available to assist
in developing the best solution for your customer.
•
For “Terms and Conditions of Sale” refer to pages 67, 68.
ExtendedWarrantyOptions:
It’s important to keep our customers informed of their
options. G-Wave offers several Extended Warranty Plans
to help customers maintain and protect the quality of their
product:
Item # EW2014‐2 Extended warranty for (2) years: 8% of unit price* Item # EW2014‐3 Extended warranty for (3) years: 10% of unit price* Item # EW2014‐4 Extended warranty for (4) years: 13% of unit price* Item # EW2014‐5 Extended warranty for (5) years: 16% of unit price* * Notes: Extended Warranty option is offered for any G‐Way Microwave / G‐Wave products, unless otherwise specified at time of order / quote. Extended Warranty options chosen MUST be purchased at time of order placement. Percent of Original Equipment Price including all performance options purchased with the system. Extended Warranty is limited to bringing the system performance to revision level at time of original order placement. G‐Way / G‐Wave will quote available upgrades separately from evaluation/repairs available for that product. All Terms and Conditions applicable to G‐Way / G‐Wave Standard Limited Warranty, shall apply to Extended Warranty options, subject to the number of years (Limit 5 years) for the option chosen. When placing an order for Extended Warranty, please show the item number (ie: EW 2014‐X) as a line item on your order. Take advantage of the Extended Warranty Program. See page 5 for more information. For more information on accessories (including filters, diplexers/duplexers, cross-band/directional couplers, antennas, combiners and splitters), visit: www.gwaymicrowave.com.
BDAPARTNUMBERDEFINITION
BAND LIST AND CORRESPONDING FREQUENCIES
CODE
UPLINK
DOWNLINK
LTE/LA (Lower A)
LTE/LB (Lower B)
LTE/LC (Lower C)
LTE/UC (Upper C)
UHF/TETRA
CDMA450
PS7
SMR
SMR/N
PS8NEPS
PS8
PS9
NPSPAC
NPSPAC/N
PS7/PS8 (Dual Band)
PS8/PS9 (Dual Band)
CELLA
CELLB
CELLAB
PCSF (Full Band)
CELLAB/PCSF (Dual Band)
GSM (GSM900)
AWS
UMTS2100
DCS (GSM-1800)
2PGN
698-703 MHz
704-709 MHz
710-715 MHz
777-787 MHz
380-512 MHz
410-495 MHz
793-805 MHz
806-821 MHz
817-824 MHz
806-816 MHz
806-824 MHz
896-902MHz
821-824 MHz
806-809 MHz
793-824/806-824 MHz
806-824/896-902 MHz
824-835 MHz
835-849 MHz
824-849 MHz
1850-1910 MHz
824-849/1850-1910 MHz
890-915 MHz
1710-1755 MHz
1920-1980 MHz
1710-1785 MHz
900-903 MHz
728-733 MHz
734-739 MHz
740-745 MHz
746-756 MHz
380-512 MHz
410-495 MHz
763-775 MHz
851-866 MHz
862-869 MHz
851-861 MHz
851-869 MHz
935-941 MHz
866-869 MHz
851-854 MHz
763-775/851-869 MHz
851-869/935-941 MHz
869-880 MHz
880-894 MHz
869-894 MHz
1930-1990 MHz
869-894/1930-1990 MHz
935-960 MHz
2110-2155 MHz
2110-2170 MHz
1805-1880 MHz
929-942 MHz
ENCLOSUREDEFINITION
LxWxH
MASTERLISTOFOPTIONS
O
S1
ODSC
DC12
DC28
ODSCRM9
ODSCRM7
LGHT
ETHER
RS232
RED
RM7
RM9
D
1:2
2:1
2:2
90
ACSP
R
N
Outdoor, includes AC/DC Line Protections
External +28 VDC OR +12 VDC Back Up
Oscillation Detect/Display and
Shut Down of all Amplifiers
Powered DC ONLY @ +12 VDC
Shut Down of all Amplifiers with Remote Monitoring via 9-Pin
Connector
Shut Down of all Amplifiers with Remote Monitoring via 7-Pin
Connector
Lightning Protection on UL & DL Ports
FULL GUI Control via Ethernet Connection
FULL GUI Control via Serial Port
Red Enclosure
Remote Monitoring via 7 Pin Connector – Applicable for “N”
and “C” Enclosures ONLY
Remote Monitoring via 9 Pin Connector –
Applicable for A, M and AB Enclosures
Circular AC Connector (no protections)
1 Port Input : 2 Port Output
90 dB Gain
AC Surge Protection and DC Line Conditioning
19” Rack Enclosure
NEMA Enclosure (Indoor unless “O” option is selected)
**Not all options apply to every unit, please see individual product page for applicable options.
Public Safety: Single Band
BDA‐PSX‐20/20‐70‐M(Old0.5/0.5W)
G-Wave’s public safety line of products in the 700-900 MHz bands are uniquely optimized repeaters with
improved noise figure and selectivity. The minimum required options to be classified as a public safety product are standard for this
line. All products are equipped with local visual alarms as a standard feature.
ELECTRICAL SPECIFICATIONS
GAIN (Minimum attenuation) [dB]
GAIN Flatness [dB]
Noise Figure [dB]
Manual Attenuation Range
Power Output @ 1 dB Compression [dBm]
Output Power ALC Set [dBm]
Output Composite Power [dBm]
rd
3 Order Output Intercept Point [dBm]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply (External)
Input/Output Impedance
VSWR IN/OUT
Propagation Delay [µSec]
70 (Min.)
+/- 1.5 (Max.)
3.5 (Max.), 3.0 (Typ.)
0 to 30 in 2 dB steps
0.5/0.5W
+26 (Typ.)
+26 (Typ.)
+ 20 +/- 1
+ 20 +/- 1
+20 (Typ.)
+20 (Typ.)
+39
+39
+15 VDC
50 ohm
<1.5:1
< 0.25
BANDS
PS700, PS800, PS900, NPSPAC, NPSPAC/N, PS8NEPS, SMR, ESMR800
Re-Bandable Single Band (Old to New)**
Re-Bandable Dual Band (Old to New)**
OPTIONS
S1
LGHT
RED
Lightning Protection on UL/DL Ports
Red Enclosure
RM9
Remote Monitoring via 9 Pin Connector
R
N
RM7
1:2
2:1
2:2
Outdoor NEMA Enclosure Including AC Surge Protection and DC Line Conditioning, with 80 dB Gain
Remote Monitoring via 7 Pin Connector – Applicable for NEMA Enclosure
Public Safety: Dual Band
BDA‐PSX/PSX‐20/20‐70‐A(Old0.5/0.5W)
G-Wave’s public safety line of products in the 700-900 MHz bands are uniquely optimized repeaters with
improved noise figure and selectivity. The minimum required options to be classified as a public safety product are standard for this
line. All products are equipped with local visual alarms as a standard feature.
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
VSWR IN/OUT
70 (Min.)
+/- 1.5 (Max.)
3.5 (Max.), 3.0 (Typ.)
0.5/0.5W
+26 (Typ.)
+26 (Typ.)
+ 20 +/- 1
+ 20 +/- 1
+20 (Typ.)
+20 (Typ.)
+39
+39
+15 VDC
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
OPTIONS
S1
LGHT
RED
Red Enclosure
RM9
R
N
RM7
1:2
2:1
2:2
Public Safety: Single and Dual Band
BDA‐PSX‐25/25‐80‐C(Old1/1W)
G-Wave’s public safety line of products in the 700-900 MHz bands are uniquely optimized
repeaters with improved noise figure and selectivity. The minimum required options to be classified as a public safety product are
standard for this line. All products are equipped with local visual alarms as a standard feature. The “C” enclosure is IP-65 rated and
may be used as an outdoor unit.
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Min.)
+ 25 +/- 1
+25 (Typ.)
+46
110V to 220V (Autoranging) 50 to 60 Hz
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
**Dual Bands available in “AB” enclosures only
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Outdoor, Environmentally Sealed
Oscillation Detect/Display and Shut Down of all Amplifiers
Oscillation Detect/Display and Shut Down of all Amplifiers with Remote Monitoring
via 7-Pin Connector (“C” Enclosure)
9-Pin Connector (“AB” Enclosure)
External +28 VDC Back Up
Red Enclosure
Remote Monitoring via 7-Pin Connector (“C” Enclosure)
Remote Monitoring 9-Pin Connector (“AB” Enclosure)
90 dB Gain
BDA‐PSX/PSX‐27/27‐80‐C(Old2/2W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Min.)
+ 27 +/- 1
+27 (Typ.)
+48
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
BDA‐PSX/PSX‐25/30‐80‐C
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 30 +/- 1
+25 (Typ.)
+30 (Typ.)
+46
+49
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
BDA‐PSX‐27/30‐80‐C
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+43 (Typ.)
+ 27 +/- 1
+ 30 +/- 1
+27 (Typ.)
+30 (Typ.)
+48
+50
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
BDA‐PSX‐25/33‐80‐C(OLD1/10W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 33 +/- 1
+25 (Typ.)
+33 (Typ.)
+46
+51
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
BDA‐PSX‐27/33‐80‐C(OLD2/10W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+40 (Typ.)
+ 27 +/- 1
+ 33 +/- 1
+27 (Typ.)
+33 (Typ.)
+48
+51
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
BDA‐PSX‐25/37‐90‐C(OLD1/25W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
90 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+44 (Typ.)
+ 25 +/- 1
+ 37 +/- 1
+25 (Typ.)
+37 (Typ.)
+46
+55
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
R
N
1:2
2:1
2:2
via 7 -Pin Connector (“C” Enclosure)
Red Enclosure
BDA‐PSX‐27/37‐90‐C(OLD2/25W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
90 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+44 (Typ.)
+ 27 +/- 1
+ 37 +/- 1
+27 (Typ.)
+37 (Typ.)
+48
+55
50 ohm
<1.5:1
< 0.25
BANDS
Dual Band - 700/800**
Dual Band - 800/900**
NOTE:
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
R
N
1:2
2:1
2:2
Red Enclosure
ENTERPRISE
BDA‐XXXX‐20/20‐70‐M(Old0.5/0.5W)
Indoor MINI BDA’s are designed to offer an effective solution for coverage up to 20,000 sq. ft.
They can be manufactured to operate within any 698-960 MHz and PCS/DCS/UMTS/AWS
bands with +20dBm composite output power on both the uplink and downlink and 70dB gain.
Units feature extremely low noise figure, high gain, high linearity and wide dynamic range. The
design is based on a duplexed path configuration using miniature cavity diplexers, with sharp
out-of-band rejection, high selectivity, low loss, and negligible propagation delay.
This system features very high reliability (MTBF) as compared with available field configurable
electronic based solutions on the market. This system effectively does not impact noise floor. It
is the most economical high performance solution for several story buildings with weak signal
strength outside the covered structure. Local visual alarm indication and remote alarm interface via D-Sub 9-pin connector and
pigtail are optional.
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
VSWR IN/OUT
70 (Min.)
+/- 1.5 (Max.)
3.5 (Max.), 3.0 (Typ.)
0.5/0.5W
+26 (Typ.)
+26 (Typ.)
+ 20 +/- 1
+ 20 +/- 1
+20 (Typ.)
+20 (Typ.)
+39
+39
+15 VDC
50 ohm
<1.5:1
< 0.25
BANDS
Any Cellular, any GSM, any PCS*/DCS/UMTS
(including Full Band UMTS)
Full Band PCS*, DCS*
LTE/AWS
Dual Band
Public Safety
* Solutions of up to 4 non contiguous blocks in PCS are available. Call for spec and pricing.
OPTIONS
S1
LGHT
RED
Red Enclosure
RM9
R
N
RM7
VA
1:2
2:1
2:2
Visual Alarms
ENTERPRISE
BDA‐XXXX‐25/25‐80‐C(Old1/1W)
Indoor BDA’s are designed for any 698-960 MHz and PCS/DCS/UMTS/AWS bands with
+25dBm composite output power on the uplink and downlink and 80dB gain minimum. Units
feature exceptionally low noise figure and a wide ALC dynamic range.
All systems include local visual alarms as standard The “C” enclosure is IP-65 rated and may
be used as an outdoor unit. Configurations of increased gain and power options are available.
External filtering for enhanced selectivity is available only in “AB” type enclosure. Additional
options are listed below:
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Min.)
+ 25 +/- 1
+25 (Typ.)
+46
50 ohm
<1.5:1
< 0.25
BANDS
Full Band PCS/DCS
LTE/AWS
Dual Band – CELL/PCS
Public Safety (including Dual Band)
** NON Contiguous PCS/DCS
* Solutions of up to 4 non contiguous blocks in PCS are only available in “AB” enclosure. For 2 Non Contiguous Low “Q” add $500,
for High “Q” add $820 – also available in “AB” enclosure. Call for spec and quote.
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
90 dB Gain – Not available for PCS (use DL Booster pg. 54)
ENTERPRISE
Indoor BDA’s are designed for any 698-960 MHz and PCS/DCS/UMTS/AWS bands with
+27dBm composite output power on the uplink and downlink and 80dB gain minimum. Units
feature exceptionally low noise figure and a wide ALC dynamic range.
All systems include local visual alarms as standard. The “C” enclosure is IP-65 rated and may
be used as an outdoor unit. Configurations of increased gain and power options are available.
External filtering for enhanced selectivity is available only in “AB” type enclosure. Additional
options are listed below:
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Min.)
+ 27 +/- 1
+27 (Typ.)
+48
50 ohm
<1.5:1
< 0.25
BANDS
Full Band PCS/DCS
LTE/AWS
* Solutions of up to 4 non contiguous blocks in PCS are only available in “AB” enclosure. For 2 Non Contiguous Low “Q” add $500,
for High “Q” add $820 – also available in “AB” enclosure. Call for spec and quote.
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
ENTERPRISE
BDA‐XXXX‐25/30‐80‐C
Indoor BDA’s are designed for any 698-960 MHz and PCS/DCS/UMTS/AWS bands with +25dBm
on the uplink composite output power and +30dBm on the downlink composite output power and
80dB gain minimum. Units feature exceptionally low noise figure and a wide ALC dynamic range.
All systems include local visual alarms as standard The “C” enclosure is IP-65 rated and may be
used as an outdoor unit. External filtering for enhanced selectivity is available only in “AB” type
enclosure. Additional options are listed below:
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 30 +/- 1
+25 (Typ.)
+30 (Typ.)
+46
+49
50 ohm
<1.5:1
< 0.25
BANDS
Any PCS/DCS/UMTS (including Full Band UMTS)
Full Band PCS/DCS
LTE/AWS
Dual Band – Public Safety
* Solutions of up to 4 non contiguous blocks in PCS are only available in “AB” enclosure. For 2 Non Contiguous Low “Q”
add $500, for High “Q” add $820 – also available in “AB” enclosure. Call for spec and quote.
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
ENTERPRISE
BDA‐XXXX‐27/30‐80‐C
All systems include local visual alarms as standard. The “C” enclosure is IP-65 rated and may be
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+43 (Typ.)
+ 27 +/- 1
+ 30 +/- 1
+27 (Typ.)
+30 (Typ.)
+48
+50
50 ohm
<1.5:1
< 0.25
BANDS
Any PCS/DCS/UMTS (including Full Band UMTS)
Full Band PCS/DCS
LTE/AWS
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
ENTERPRISE
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 33 +/- 1
+25 (Typ.)
+33 (Typ.)
+46
+51
50 ohm
<1.5:1
< 0.25
BANDS
Any Cellular, any GSM
Any PCS*/DCS/UMTS (including Full Band UMTS)
Full Band PCS/DCS
LTE/AWS
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
ENTERPRISE
Indoor BDA’s are designed for any 698-960 MHz and PCS/DCS/UMTS/AWS bands with +27dBm on the uplink composite output
power and +33dBm on the downlink composite output power and 80dB gain minimum. Units feature exceptionally low noise figure
and a wide ALC dynamic range.
All systems include local visual alarms as standard. The “C” enclosure is IP-65 rated and may be used as an outdoor unit. External
filtering for enhanced selectivity is available only in “AB” type enclosure. Additional options are listed below:
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+40 (Typ.)
+ 27 +/- 1
+ 33 +/- 1
+27 (Typ.)
+33 (Typ.)
+48
+51
50 ohm
<1.5:1
< 0.25
BANDS
Any Cellular, any GSM
Any PCS*/DCS/UMTS (including Full Band UMTS)
Full Band PCS/DCS
LTE/AWS
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
ENTERPRISE
90 dB gain minimum. Units feature exceptionally low noise figure and a wide ALC dynamic range.
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
90 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+44 (Typ.)
+ 25 +/- 1
+ 37 +/- 1
+25 (Typ.)
+37 (Typ.)
+46
+55
50 ohm
<1.5:1
< 0.25
BANDS
(including Full Band CELL/ GSM/ UMTS)
Full Band PCS/DCS
LTE/AWS
** NON Contiguous CELL (A+A' or B+B')
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
R
N
1:2
2:1
2:2
ENTERPRISE
90 dB gain minimum. Units feature exceptionally low noise figure and a wide ALC dynamic range.
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
90 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+44 (Typ.)
+ 27 +/- 1
+ 37 +/- 1
+27 (Typ.)
+37 (Typ.)
+48
+55
50 ohm
<1.5:1
< 0.25
BANDS
(including Full Band CELL/ GSM/ UMTS)
Full Band PCS/DCS
LTE/AWS
** NON Contiguous CELL (A+A' or B+B')
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC28
LGHT
RM7
RM9
ETHER
RS232
ACSP
R
N
1:2
2:1
2:2
UHF/TETRA/CDMA450
G-Wave offers a broad selection of systems in the 380-512 MHz frequency range which
covers UHF, TETRA and CDMA450 applications. Standard repeaters (BDA’s) feature
+20dBm on the uplink and +20dBm downlink output power. Standard configurations are
available with gain of 55dB. Other configurations of gain and power are available. All
products are equipped with local visual alarms as a standard feature.
Call for an accurate solution and pricing.
BW = Pass Band of each UL & DL filters
Channel Separation: Measured from upper corner of the low pass-band to lower
corner of high pass-band.
GAIN Flatness [dB]
Noise Figure [dB]
Manual Attenuation Range (Continuous)
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
55 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.0 (Typ.)
+27 (Typ.)
+27 (Typ.)
+20 (Typ.)
+20 (Typ.)
+20 +/- 1
+20 +/- 1
+40 (Typ.)
+40 (Typ.)
50 ohm
<1.5:1
< 0.25
BDA-U/T/C/XX-20/20W-55-AB
BANDS
Frequency Band
UHF/TETRA/CDMA – 55 dB Gain, "AB" Enclosure
Band separation is 2 MHz Minimum
* Standard Filters/Standard Testing **Special Filters/ Standard Testing
BW = 2 MHz
BW = 1 MHz
BW = 3 MHz
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Outdoor, Environmentally Sealed Unit
via 7 -Pin Connector – For NEMA Enclosure
via 9-Pin Connector – For AB Enclosure ONLY
Red Enclosure
Remote Monitoring via 9 Pin Connector (FOR AB ENCLOSURE)
Remote Monitoring via 7 Pin Connector (FOR NEMA ENCLOSURE)
UHF/TETRA/CDMA450
G-Wave offers a broad selection of systems in the 380-512 MHz frequency range which
covers UHF, TETRA and CDMA450 applications. Standard repeaters (BDA’s) feature
+31dBm on the uplink and +20dBm downlink output power. Standard configurations are
available with gain of 55dB. Other configurations of gain and power are available. All
products are equipped with local visual alarms as a standard feature.
Call for an accurate solution and pricing.
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
55 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.0 (Typ.)
+41 (Typ.)
+27 (Typ.)
+31 (Typ.)
+20 (Typ.)
+31 +/- 1
+20 +/- 1
+53 (Typ.)
+40 (Typ.)
50 ohm
<1.5:1
< 0.25
BDA-U/T/C/XX-31/20-55-AB
BANDS
Frequency Band
Bandseparation is 2 MHz Minimum
* Standard Filters/Standard Testing **Special Filters/ Standard Testing
BW = 2 MHz
BW = 1 MHz
BW = 3 MHz
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Red Enclosure
UHF/TETRA/CDMA450
G-Wave offers a broad selection of systems in the 380-512 MHz frequency range which covers
UHF, TETRA and CDMA450 applications. Standard repeaters (BDA’s) feature +31dBm on the
uplink and downlink output power. Standard configurations are available with gain of 55dB or
70dB. All products are equipped with local visual alarms as a standard feature. Call for an
accurate solution and pricing
Channel Separation: Measured from upper corner of the low pass-band to lower corner of high
pass-band.
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
50 - 55
+/- 1.5 (Max.)
6.0 (Max.), 5.0 (Typ.)
+41 (Typ.)
+ 31 +/- 1
+31 (Typ.)
+53 (Typ.)
50 ohm
<1.5:1
< 0.25
BDA-U/T/C/XX-31/31-55-AB (Old 4/4W)
BANDS
BW = 2 MHz
BW = 1 MHz
BW = 3 MHz
Frequency Band
Band separation is 2 MHz Minimum
* Standard Filters/Standard Testing
**Special Filters/ Standard Testing
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
via 7 Pin Connector – For NEMA Enclosure
Red Enclosure
UHF/TETRA/CDMA450
G-Wave offers a broad selection of systems in the 380-512 MHz frequency range which covers
UHF, TETRA and CDMA450 applications. Standard repeaters (BDA’s) feature +31dBm on the
uplink and downlink output power. Standard configurations are available with gain of 55dB or
70dB. All products are equipped with local visual alarms as a standard feature. Call for an
accurate solution and pricing
Channel Separation: Measured from upper corner of the low pass-band to lower corner of high
pass-band.
BDA-U/T/C/XX-31/31W-XX-N (Old 4/4W) (NEMA 4 Indoor Applications)
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
50 to 70
+/- 1.5 (Max.)
6.0 (Max.), 5.0 (Typ.)
+41 (Typ.)
+ 31 +/- 1
+31 (Typ.)
+53 (Typ.)
50 ohm
<1.5:1
< 0.25
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
BANDS
Frequency Band
UHF/TETRA/CDMA – 70 dB Gain, "N" Enclosure
Band separation is 2 to 5 MHz Minimum
UHF/TETRA/CDMA – 50 dB Gain, "N" Enclosure
Band separation is 0.8 to 1.8 MHz
BW = 2 MHz
BW = 1 MHz
BW = 3 MHz
*
**
***
**
***
****
* Standard Filters/Standard Testing **Special Filters/ Standard Testing *** Double Filters/ Standard Testing
**** Double Special Filters/ Special Testing
OPTIONS
O
ODSC
ODSCRM7
S1
DC12
DC28
LGHT
RED
RM7
ETHER
RS232
D
R
ACSP
1:2
2:1
2:2
via 7-Pin Connector – For NEMA Enclosure
Red Enclosure
VHF
G-Wave offers a broad selection of systems in the 30-300 MHz frequency range which covers VHF applications.
Standard repeaters (BDA’s) feature +31dBm on the uplink and downlink output power. Standard configurations are
available with gain of 55 or 70dB. Other configurations of gain and power are available. Call for an accurate solution
and pricing.
Electrical Specifications:
Minimum Channel Separation
Minimum Bandwidth
1-2 MHz
1 MHz
Please call for custom spec and quote. 201-343-6388 or e-mail at [email protected]
DualBandBDA’s
Dual-band bi-directional amplifiers (BDA's) extend the coverage area of radio communications in buildings and RFshielded environments. Units feature low noise figure and wide dynamic range. The design is a multi-block system,
based on a quad-path configuration with sharp out-of-band attenuation. This allows for improved isolation between
the receiving and transmitting paths for any combination of 760-960 with 1710-2155 MHz bands.
BDA‐CELLXX/PCS/X‐20/20‐70‐AB(Old0.5/0.5W)
Indoor dual-band for any cellular band combined with any Contiguous PCS Block with
+20dBm Uplink and +20dBm Downlink and Minimum 70dB Gain. Local Visual alarms are
included as standard.
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
VSWR IN/OUT
70 (Min.)
+/- 1.5 (Max.)
3.5 (Max.), 3.0 (Typ.)
0.5/0.5W
+26 (Typ.)
+26 (Typ.)
+ 20 +/- 1
+ 20 +/- 1
+20 (Typ.)
+20 (Typ.)
+39
+39
+15 VDC
50 ohm
<1.5:1
< 0.25
BANDS
Power UL/DL
20/20
Uplink
Any Band - 760-960 MHz
Any Band - 1710-2155 MHz*
Downlink
* Solutions of up to 2 non contiguous blocks in PCS are available. Call for spec and quote.
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Outdoor, Environmentally Sealed Unit (“N” Option must be selected)
Red Enclosure
BDA‐CELLXX/PCS/X‐25/25‐80‐AB(Old1/1W)
Indoor dual-band for any cellular band combined with any PCS Blocks with +25dBm
Uplink and +25dBm Downlink and 80dB Minimum Gain. Local visual alarms are included.
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Min.)
+ 25 +/- 1
+25 (Typ.)
+46
50 ohm
<1.5:1
< 0.25
BANDS
Power UL/DL
25/25
Uplink
Downlink
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
via 7-Pin Connector – For NEMA Enclosure
Red Enclosure
BDA‐CELLXX/PCS/X‐27/27‐80‐AB(Old2/2W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Min.)
+ 27 +/- 1
+27 (Typ.)
+48
50 ohm
<1.5:1
< 0.25
BANDS
Power UL/DL
27/27
Uplink
Downlink
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Red Enclosure
BDA‐CELLXX/PCS/X‐25/30‐80‐AB
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 30 +/- 1
+25 (Typ.)
+30 (Typ.)
+46
+49
50 ohm
<1.5:1
< 0.25
BANDS
Power UL/DL
25/30
Uplink
Downlink
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Red Enclosure
BDA‐CELLXX/PCS/X‐27/30‐80‐AB
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+43 (Typ.)
+ 27 +/- 1
+ 30 +/- 1
+27 (Typ.)
+30 (Typ.)
+48
+50
50 ohm
<1.5:1
< 0.25
BANDS
Power UL/DL
27/30
Uplink
Downlink
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Red Enclosure
BDA‐CELLXX/PCS/X‐25/33‐80‐AB(OLD1/10W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 33 +/- 1
+25 (Typ.)
+33 (Typ.)
+46
+51
50 ohm
<1.5:1
< 0.25
BANDS
Power UL/DL
25/33
Uplink
Downlink
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Red Enclosure
BDA‐CELLXX/PCS/X‐27/33‐80‐AB(OLD2/10W)
GAIN Flatness [dB]
Noise Figure [dB]
rd
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
5.0 (Max.), 4.5 (Typ.)
+34 (Typ.)
+40 (Typ.)
+ 27 +/- 1
+ 33 +/- 1
+27 (Typ.)
+33 (Typ.)
+48
+51
50 ohm
<1.5:1
< 0.25
BANDS
Power UL/DL
27/33
Uplink
Downlink
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RED
RM9
RM7
ETHER
RS232
D
R
N
ACSP
1:2
2:1
2:2
Red Enclosure
TwoWayFiberBoosterLinks
The two-way fiber Link is offered in 1:1 and 1:4 Master and
Remote unit configurations. The master unit as standard is a
passive pre-selector unit with variable 0~30 dB (2dB Step)
Attenuator to adjust the signal level to fiber transceiver. It can
also be offered as a front end booster with 35~45 dB gain.
Fiber links offer 45 to 80dB link gain, superior noise figure and
excellent OIP3 performance. Links offered for: VHF, UHF, LTE,
Public Safety, SMR, CELL, DCS PCS and UMTS bands, as well
as dual band and multi bands on the same DAS.
Visual alarms for laser and amplifier are included. The table
below refers to links packaged in standard indoor enclosures
only with: passive master, standard link gain of 40-50 dB, and
downlink composite power in dBm.
BANDS:
Master
1:1
RF Composite Power [dBm]
N/A
Remote
1:4
0.5W
1W
2W
5W
10W
25W
N/A
+20
dBm
+25
dBm
+27
dBm
+30
dBm
+33 dBm
+37 dBm
Any single Contiguous Band (760-2200MHz)
UHF (Applies to +31 dBm output power)*
Dual Band Contiguous Band
(760-960/1710-2200MHz)**
Transceiver Wall Mount
***N – NEMA 4 Enclosure Option Pricing
* Pricing shown is for standard systems (Bandwidth = 2 MHz).
** Pricing refers to ANY combination of 2 bands within frequency range shown.
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RM7
RM9
ETHER
RS232
D
R
CABD
CAB
ACT
N
1:2
2:1
2:2
Outdoor, environmentally sealed unit
via 7-Pin Connector (FOR NEMA ENCLOSURE)
via 9-Pin Connector (FOR RACK ENCLOSURE)
19” RACK TALL CABINET WITH DOOR AND AC POWER STRIP
19” RACK TALL CABINET WITHOUT DOOR AND AC POWER STRIP
Active MASTER with 35dB Gain
* For Broad Band, VHF & Higher Power Systems – Call for quote and spec.
LightLink is a Fiber DAS System integrating Public Safety 700/800 MHz, 900
MHz and UHF frequencies. Users are now able to integrate Public Safety
Frequencies amplified from either a G-WAVE (or similar BDA), off-air repeater
or any direct signal input; allowing for customizable signal sourcing at the
Headend location.
LightLink provides custom balance for future service upgrades. The system
includes ALC (Auto Level Control) to protect the integrity of the system as well
as 30 dB of manual attenuation to adjust gain level, should the signal change due
to service upgrades. This unit is not available in an outdoor configuration.
Master
BANDS:
1:1
N/A
Remote
1:4
N/A
Remote UHF
0.5W
+20
1W
+25
N/A
2W
5W
10W
25W
+27
+30
(31 UHF)
+33
+37
N/A
N/A
Remote 700/800 MHz
Remote 900 MHz
-Master Unit includes Headend Combiner Module (HCM)
Additional Equipment:
Optional Coverage at Headend Location/ Coverage Headend Module (CHM)
Remote Optical Module (ROM)
Necessary Equipment
to Combine Services
Remote Combiner Module (RCM)
Remote Service Combiner Module (RSCM)
OPTIONS
ODSC
ODSCRM9
S1
DC12
DC28
LGHT
RM9
ETHER
RS232
R
CABD
CAB
ACT
1:2
2:1
2:2
Active MASTER with 35dB Gain (For All Services UHF, PS7/8, PS9)
Paging:BDA‐2PGN‐20/20‐70‐A(Old0.5/0.5W)
Indoor MINI BDA’s are designed to offer an effective solution for coverage up to
20,000 sq. ft. They can be manufactured to operate within 900-942 MHz and
PCS/DCS/UMTS/AWS bands with +20dBm composite output power on both the
uplink and downlink @ 70dB gain
Units feature extremely low noise figure, high gain, high linearity and wide dynamic
range. The design is based on a duplexed path configuration using miniature cavity
diplexers, with sharp out-of-band rejection, high selectivity, low loss, and negligible
propagation delay.
This system features very high reliability (MTBF) as compared with available field
configurable electronic based solutions on the market. This system effectively does not impact noise floor.
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
rd
VSWR IN/OUT
20/20
+26 (Typ.)
+26 (Typ.)
+ 20 +/- 1
+ 20 +/- 1
+20 (Typ.)
+20 (Typ.)
+39
+39
+15 VDC
70 (Min.)
+/- 1.5 (Max.)
3.5 (Max.), 3.0 (Typ.)
50 ohm
<1.5:1
< 0.25
20/27
+26 (Typ.)
+32 (Typ.)
+ 20 +/- 1
+ 25 +/- 1
+20 (Typ.)
+25 (Typ.)
+39
+45
+24 VDC for +27dBm
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
S1
LGHT
RED
Red Enclosure
RM9
R
N
RM7
1:2
2:1
2:2
Paging:BDA‐2PGN‐25/25‐80‐AB(Old1/1W)
Two-way paging indoor BDA’s are designed with a +25dBm composite output
power on the uplink and downlink @ 80dB gain minimum. Units feature
exceptionally low noise figure and a wide ALC dynamic range.
All systems include local visual alarms as standard. For an additional fee, we
can accommodate remote monitoring via D-sub 9-pin connector and pigtail.
Configurations of increased gain and power options are available. External
filtering options for enhanced selectivity are available. Call for UPS and
external DC backup options.
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+32 (Typ.)
+ 25 +/- 1
+25 (Typ.)
+46
50 ohm
<1.5:1
< 0.25
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Outdoor, Environmentally Sealed (Must select N Option)
9-Pin Connector ( “AB” Enclosure)
via 7-Pin Connector ( “NEMA” Enclosure)
Red Enclosure
Remote Monitoring via 7 Pin Connector ( “NEMA” Enclosure)
Remote Monitoring via 9-Pin Connector (“AB” Enclosure)
90 dB Gain
power on the uplink and downlink @ 80dB gain minimum. Units feature
exceptionally low noise figure and a wide ALC dynamic range.
filtering options for enhanced selectivity are available. Call for UPS and
external DC backup options.
GAIN Flatness [dB]
Noise Figure [dB]
rd
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+34 (Typ.)
+ 27 +/- 1
+27 (Typ.)
+48
50 ohm
<1.5:1
< 0.25
PRICING
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
Paging:BDA‐2PGN‐25/30‐80‐AB
power on the uplink and a +30dBm composite output power on the downlink @ 80
dB gain minimum. Units feature exceptionally low noise figure and a wide ALC
dynamic range.
All systems include local visual alarms as standard. For an additional fee, we can
accommodate remote monitoring via D-sub 9-pin connector and pigtail. External
filtering options for enhanced selectivity are available.
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 30 +/- 1
+25 (Typ.)
+30 (Typ.)
+46
+49
50 ohm
<1.5:1
< 0.25
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
Paging:BDA‐2PGN‐27/30‐80‐AB
power on the uplink and a +30dBm composite output power on the downlink @ 80
dB gain minimum. Units feature exceptionally low noise figure and a wide ALC
dynamic range.
All systems include local visual alarms as standard. For an additional fee, we can
accommodate remote monitoring via D-sub 9-pin connector and pigtail. External
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+34 (Typ.)
+40 (Typ.)
+ 27 +/- 1
+ 30 +/- 1
+27 (Typ.)
+30 (Typ.)
+48
+49
50 ohm
<1.5:1
< 0.25
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
power on the uplink and a +33dBm composite output power on the downlink
@ 80 dB gain minimum. Units feature exceptionally low noise figure and a
wide ALC dynamic range.
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+32 (Typ.)
+40 (Typ.)
+ 25 +/- 1
+ 33 +/- 1
+25 (Typ.)
+33 (Typ.)
+46
+50
50 ohm
<1.5:1
< 0.25
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
via 7- Pin Connector ( “NEMA” Enclosure)
Red Enclosure
90 dB Gain
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+34 (Typ.)
+40 (Typ.)
+ 27 +/- 1
+ 33 +/- 1
+27 (Typ.)
+33 (Typ.)
+48
+50
50 ohm
<1.5:1
< 0.25
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+32 (Typ.)
+44 (Typ.)
+ 25 +/- 1
+ 37 +/- 1
+25 (Typ.)
+37 (Typ.)
+45
+50
50 ohm
<1.5:1
< 0.25
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
via 7- Pin Connector ( “NEMA” Enclosure)
Red Enclosure
90 dB Gain
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
UPLINK
DOWNLINK
rd
Power Supply
VSWR IN/OUT
80 (Min.)
+/- 1.5 (Max.)
6.0 (Max.), 5.5 (Typ.)
+34 (Typ.)
+44 (Typ.)
+ 27 +/- 1
+ 37 +/- 1
+27 (Typ.)
+37 (Typ.)
+48
+50
50 ohm
<1.5:1
< 0.25
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
ODSC
ODSCRM9
ODSCRM7
S1
DC28
LGHT
RED
RM7
RM9
ETHER
RS232
ACSP
90
R
N
1:2
2:1
2:2
Red Enclosure
90 dB Gain
PagingTwoWayFiberBoosterLinks:
The two-way fiber Link is offered in 1:1 and 1:4 Master and
passive pre-selector unit with variable 0~30dB (2dB Step)
also be offered as a front end booster with 35~45dB gain.
excellent OIP3 performance. Visual alarms for laser and
amplifier are included.
The table below refers to links packaged in standard indoor
enclosures only with: passive master, standard link gain of 4050 dB, and downlink composite power in dBm. Refer to options
for other gain, and mounting options
BANDS:
Master
Remote
1:1
1:4
0.5W
1W
2W
5W
10W
25W
N/A
N/A
+20 dBm
+25 dBm
+27 dBm
+30 dBm
+33 dBm
+37 dBm
2PGN
OPTIONS
O
ODSC
ODSCRM7
ODSCRM9
S1
DC12
DC28
LGHT
RM7
RM9
ETHER
RS232
D
CABD
CAB
ACT
N
1:2
2:1
2:2
via 7-Pin Connector (FOR NEMA ENCLOSURE)
* For Broad Band & Higher Power Systems – Call for quote and spec.
DownlinkSignalBooster:BDA‐XXXX‐0/14‐35‐X(Old0/0.15W)
Downlink boosters are a cost-effective solution when the
input signal is extremely low (-70 to -100 dBm). It will
enhance the signal of a BDA to nominal levels. Downlink
boosters optimize coverage without the use of a high gain
BDA. The additional gain (35-40dB) is added as a front end
downlink signal booster to the BDA. This effectively
creates a 105 to 125dB “system” with no oscillation
problems and minimal loss in uplink path. Visual alarms are
not included on standard units, please call.
Insertion Loss [dB]
GAIN Flatness [dB]
Noise Figure [dB]
3rd Order Output Intercept Point [dBm]
Power Supply
VSWR IN/OUT
UPLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
2.0 (Typ.)
35 (Typ.)
+/- 1.5 (Max.)
3.5 (Max.), 3.0 (Typ.)
+21 (Typ.)
+14 (Typ.)
+32 (Typ.)
+15VDC or 110V to 220V (Autoranging) 50 to 60 Hz
50 ohm
<1.5:1
BANDS
SMR, GSM*, CELL*, 700 MHz, 800 MHz, 900 MHz
LTE/AWS
PCS/X**, PCS/UMTS (Full Band)
Dual Band – CELL/PCS, 700/800, 800/900
UHF "AB"
* Any full or partial band
** Any contiguous block
OPTIONS
O
S1
LGHT
RED
D
R
N
Outdoor, includes AC/DC Line Protections, Unit will be transplanted into NEMA enclosure
Red Enclosure
PagingDownlinkBooster:BDA‐2PGN‐0/14‐35‐X(Old0.15/0.15W)
Downlink boosters are a cost-effective solution when the input signal is
extremely low (-70 to -100 dBm). It will enhance the signal of a BDA to
nominal levels. Downlink boosters optimize coverage without the use of a
high gain BDA. The additional gain (35-40 dB) is added as a front end
downlink signal booster to the BDA. This effectively creates a 105 to 125
dB “system” with no oscillation problems and minimal loss in uplink path.
Insertion Loss [dB]
GAIN Flatness [dB]
Noise Figure [dB]
Power Supply
VSWR IN/OUT
UPLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
DOWNLINK
2.0 (Typ.)
35 (Typ.)
+/- 1.5 (Max.)
3.5 (Max.), 3.0 (Typ.)
+21 (Typ.)
+14 (Typ.)
+32 (Typ.)
+15VDC or 110V to 220V (Autoranging) 50 to 60 Hz
50 ohm
<1.5:1
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
S1
LGHT
RED
D
R
N
Red Enclosure
LineExtender:BDA‐XXXX‐14/14‐35‐X(Old0.15/0.15W)
Line Extenders are used to extend the range of coverage of a BDA, but do
NOT incorporate ALC function. They are offered for UHF, 698-960 MHz
bands and PCS/DCS/UMTS/AWS. Line extenders have an uplink and
downlink linear power of +14dBm and 35dB gain. Visual alarms are not
available on standard units,
please call.
Line extenders can be used as low power repeaters as they have sufficient
power to cover up to 5,000 sq. ft, yet have extremely low noise figure. Line
extenders can be powered by external DC power supply or through RF with
bias tee sold separately.
GAIN Flatness [dB]
Noise Figure [dB]
Power Supply
VSWR IN/OUT
UPLINK / DOWNLINK
UPLINK / DOWNLINK
UPLINK / DOWNLINK
35 (Typ.)
+/- 1.5 (Max.)
4.0 (Max.), 3.5 (Typ.)
+21 (Min.)
+14 (Typ.)
+32
15VDC or 110V to 220V (Autoranging) 50 to 60 Hz
50 ohm
<1.5:1
BANDS
SMR, GSM*, CELL*, 700 MHz, 800 MHz, 900 MHz
LTE/AWS
PCS/X**, PCS/UMTS (Full Band)
Dual Band – CELL/PCS, 700/800, 800/900
UHF "AB"
* Any full or partial band
** Any contiguous block
OPTIONS
O
S1
LGHT
RED
RM7
RM9
D
R
N
Red Enclosure
Remote Monitoring via 9 Pin Connector (For any enclosure other than NEMA)
PagingLineExtender:BDA‐2PGN‐14/14‐35‐X(Old0.15/0.15W)
Line Extenders for two-way paging are used to extend the range of
coverage of a BDA, but do NOT incorporate ALC function. Line extenders
have an uplink and downlink linear power of +14dBm and 35dB gain.
Line extenders can be used as low power repeaters as they have sufficient
power to cover up to 5,000 sq. ft, yet have extremely low noise figure. Line
extenders can be powered by external DC power supply or through RF with
bias tee sold separately.
35 (Typ.)
+/- 1.5 (Max.)
4.0 (Max.), 3.5 (Typ.)
GAIN Flatness [dB]
Noise Figure [dB]
UPLINK /
DOWNLINK
UPLINK /
DOWNLINK
UPLINK /
DOWNLINK
+21 (Min.)
+14 (Typ.)
+32
15VDC or 110V to 220V (Autoranging) 50 to 60 Hz
50 ohm
<1.5:1
Power Supply
VSWR IN/OUT
BANDS
Frequency Band
Uplink
Downlink
2PGN
900-903 MHz
929-942 MHz
OPTIONS
O
S1
LGHT
RED
RM7
RM9
D
R
N
Red Enclosure
Remote Monitoring via 9 Pin Connector (For any enclosure other than NEMA)
One‐WayAmplifier
PARTNUMBERDEFINITION
BAND LIST AND CORRESPONDING FREQUENCIES
CODE
UPLINK
DOWNLINK
LTE/LA (Lower A)
LTE/LB (Lower B)
LTE/LC (Lower C)
LTE/UC (Upper C)
UHF/TETRA
CDMA450
PS7
SMR
SMR/N
PS8NEPS
PS8
PS9
NPSPAC
NPSPAC/N
PS7/PS8 (Dual Band)
PS8/PS9 (Dual Band)
CELLA
CELLB
CELLAB
PCSF (Full Band)
CELLAB/PCSF (Dual Band)
GSM (GSM900)
AWS
UMTS2100
DCS (GSM-1800)
2PGN
698-703 MHz
704-709 MHz
710-715 MHz
777-787 MHz
380-512 MHz
410-495 MHz
793-805 MHz
806-821 MHz
817-824 MHz
806-816 MHz
806-824 MHz
896-902MHz
821-824 MHz
806-809 MHz
793-824/806-824 MHz
806-824/896-902 MHz
824-835 MHz
835-849 MHz
824-849 MHz
1850-1910 MHz
824-849/1850-1910 MHz
890-915 MHz
1710-1755 MHz
1920-1980 MHz
1710-1785 MHz
900-903 MHz
728-733 MHz
734-739 MHz
740-745 MHz
746-756 MHz
380-512 MHz
410-495 MHz
763-775 MHz
851-866 MHz
862-869 MHz
851-861 MHz
851-869 MHz
935-941 MHz
866-869 MHz
851-854 MHz
763-775/851-869 MHz
851-869/935-941 MHz
869-880 MHz
880-894 MHz
869-894 MHz
1930-1990 MHz
869-894/1930-1990 MHz
935-960 MHz
2110-2155 MHz
2110-2170 MHz
1805-1880 MHz
929-942 MHz
OneWayFiberBoosterLinks
The one-way fiber Link is offered in 1:1 and 1:4 Master and Remote
unit configurations. The master unit as standard is a passive preselector unit with variable 0~30 dB (2dB Steps) Attenuator to adjust
the signal level to fiber transceiver. It can also be offered as a front
end booster with 35~45dB gain.
excellent OIP3 performance. Links offered for: VHF, UHF, LTE,
Public Safety, SMR, CELL, DCS PCS and UMTS bands, as well as
dual band and multi bands on the same DAS.
Visual alarms for laser and amplifier are included. The table below
refers to links packaged in standard indoor enclosures only with:
passive master, standard link gain of 40-50dB, and downlink
composite power in dBm. Refer to options for other gain, and
mounting options.
Master
BANDS:
Remote
1:1
1:4
0.5W
1W
2W
5W
10W
25W
N/A
N/A
+20
+25
+27
+30
+33
+37
Any single Contiguous Band (760-2200MHz)
VHF
UHF (Applies to +31 dBm output power)*
Dual Band Contiguous Band
(760-960/1710-2200MHz)**
Transceiver Wall Mount
***N - NEMA 4 Enclosure Pricing
* Pricing shown is for standard systems (Bandwidth = 2 MHz). Any deviations from standard separation please call for
pricing.
** Pricing refers to ANY combination of 2 bands within frequency range shown.
OPTIONS
O
S1
DC12
DC28
LGHT
RM7
RM9
ETHER
RS232
D
CABD
CAB
ACT
N
* For Broad Band & Higher Power Systems – Call for quote and spec.
PagingOneWayFiberBoosterLinks:
The one-way fiber Link is offered in 1:1 and 1:4 Master and
passive pre-selector unit with variable 0~30dB (2 dB Step)
also be offered as a front end booster with 35~45dB gain.
excellent OIP3 performance. Visual alarms for laser and
amplifier are included.
The table below refers to links packaged in standard indoor
enclosures only with: passive master, standard link gain of 4050dB, and downlink composite power in dBm. Refer to options
for other gain, and mounting options.
Master
BANDS:
1:1
N/A
Remote
1:4
0.5W
1W
2W
5W
10W
25W
N/A
+20
dBm
+25
dBm
+27
dBm
+30
dBm
+33
dBm
+37 dBm
2PGN
OPTIONS
O
S1
DC12
DC28
LGHT
RM7
RM9
ETHER
RS232
D
CABD
CAB
ACT
N
* For Broad Band & Higher Power Systems – Call for quote and spec
OneWayAmplifiers:GAXXX/X/XXSK‐X
One-way amplifiers are an economic solution when signal boosting is required in one direction only. Units are
available for VHF, UHF, 698-960 MHz, PCS/DCS/UMTS/AWS and WiFi/WiMAX bands.
All amplifiers are available in configurations of gain 60 to 90dB, composite power from +20 to +40dBm. The units
include adjustable attenuation from 0~30dB in 2dB steps.
Call for specifications and pricing.
GAXXX/X/20/70-M
GAXXX/X/25/80-B
GAXXX/X/27/80-B
GAXXX/X/33/80-AB
GAXXX/X/37/90-AB
70 "A1"
80 "B"
80 "B1"
80 "A2" or "AB2"
90 "AB3"
GAIN Flatness [dB]
Noise Figure [dB]
+/- 1.5 (Typ.)
3.5 (Typ.)
4.5 (Typ.)
Power Output @ P 1 dB
Compression [dBm]
IP3rd [dBm]
Power Supply
+27 (Typ.)
+32 (Typ.)
+34 (Typ.)
+40 (Typ.)
+44 (Typ.)
+ 20 +/- 1
+ 25 +/- 1
+ 27 +/- 1
+ 33 +/- 1
+ 37 +/- 1
+20 (Typ.)
+25 (Typ.)
+27 (Typ.)
+33 (Typ.)
+37 (Typ.)
+39
+45
+47
+50
+55
15VDC/ 0.7A
50 ohm
VSWR IN/OUT
<1.5:1
< 0.25
POWER OPTIONS FOR ENTERPRISE AND PUBLIC SAFETY
GA-XXX/XX/20/70-B
GA-XXX/XX/25/70-A
GA-XXX/XX/27/80-AB
GA-XXX/XX/31/80-AB
GA-XXX/XX/20/60-M
GA-XXX/XX/27/60-B
GA-XXX/XX/30/60-B
GA-XXX/X/20/70-M
GA-XXX/X/25/80-B
GA-XXX/X/27/80-B
GA-XXX/X/33/80-AB
GA-XXX/X/37/90-AB
POWER OPTIONS FOR UHF ONE-WAY AMPLIFIER
POWER OPTIONS FOR VHF ONE-WAY AMPLIFIER
OPTIONS
O
S1
DC28
LGHT
RED
RM9
ACSP
90
R
N
Red Enclosure
90 dB Gain
PagingOneWayAmplifiers:GA2PGN/X/XX‐X
One-way amplifiers are an economic solution when signal boosting is required in one direction only. All amplifiers are
available in configurations of gain 60 to 90dB, composite power from +20 to +40dBm. The units include adjustable
attenuation from 0~30 dB in 2 dB steps.
Call for specifications and pricing.
GA-2PGN/X/20/70-M
GA-2PGN/X/25/80-B
GA-2PGN/X/27/80-B
GA-2PGN/X/33/80-AB
GA-2PGN/X/37/90-AB
70 "A1"
80 "B"
80 "B1"
80 "A2" or "AB2"
90 "A3"or "AB3"
GAIN Flatness [dB]
Noise Figure [dB]
+/- 1.5 (Typ.)
3.5 (Typ.)
4.5 (Typ.)
Power Output @ P 1 dB
Compression [dBm]
+27 (Typ.)
+32 (Typ.)
+34 (Typ.)
+40 (Typ.)
+44 (Typ.)
+ 20 +/- 1
+ 25 +/- 1
+ 27 +/- 1
+ 33 +/- 1
+ 37 +/- 1
+20 (Typ.)
+25 (Typ.)
+27 (Typ.)
+33 (Typ.)
+37 (Typ.)
+39
+45
+47
+50
+55
IP3rd [dBm]
Power Supply
15VDC/ 0.7A
50 ohm
VSWR IN/OUT
<1.5:1
< 0.25
POWER OPTIONS FOR 2PGN
GA-2PGN/X/20/70-M
GA-2PGN/X/25/80-B
GA-2PGN/X/27/80-B
GA-2PGN/X/33/80-AB
GA-2PGN/X/37/90-AB
OPTIONS
O
S1
DC28
LGHT
RED
RM9
ACSP
90
R
N
Red Enclosure
90 dB Gain
Accessories:
Filters, Diplexers, Duplexers, Cross Band Combiners
Splitters/Combiners, Directional Couplers & Antennas
Filters
Cavity filters manufactured by G-Way/G-Wave exhibit unmatched LOW Insertion
Loss, High Selectivity, and excellent Passive Intermodulation performance (PIM).
The filters that we offer as accessories are required by many installers/integrators
and system designers. We offer both BAND REJECT and BAND PASS Filters as
needed.
Diplexers
When two filters are connected together at one side a Diplexer is created. The
Diplexer is a 3 port device. In Wireless Communications, diplexers are used to
connect the Receive path (Rx) and Transmit path (Tx) to one Common or Antenna
port. G-Way/G-Wave uses a vast variety of High “Q” Cavity Diplexers in a majority
of our systems, some products are offered as accessories required by many
installers/integrators and system designers.
Duplexers
When two filters are connected together at both ends, a Duplexer is created. The
Duplexer is a 2 port device. In Wireless Communications, duplexers enhance
selectivity of the service for specific Carriers. G-Way/G-Wave uses a vast variety
of High “Q” Cavity Duplexers. Products are offered as accessories, required by
many installers/integrators and system designers.
Cross Band Combiners
G-Way/G-Wave offers a large variety of Cross Band Couplers for combining
multiple carriers in various bands, such as VHF/ UHF/ LTE/ PSS/ CELL/ PCS/
AWS/ WiFi/ WiMAX etc., into one common cable run or DAS (Distribution Antenna
System). Call for complete offering and availability beyond the table below.
Splitters/Combiners
The Splitter/Combiners share a common stripline design for low power indoor
applications covering all the wireless services in the 400 MHz range and in 698 to
2500 MHz or 760-2500 MHz ranges. The extremely wide range allows use with
multi-band antennas and leaky cable systems.
Directional Couplers
Directional Couplers share a common stripline design for low/medium power
indoor applications covering all the wireless services in the 400 MHz range and in
698 to 2500 MHz or 760-2500 MHz ranges. The extremely wide range allows use
with multi-band antennas and leaky cable systems.
Antennas
G-Way/G-Wave stocks indoor and outdoor most commonly used Antenna for
various bands and applications including Dual band versions. Call for complete
offering and availability beyond the table below.
FILTERS, DIPLEXERS, DUPLEXERS
CBB859/25SK-D3
98021019
Duplexer CELL AB
824 - 849
Pass Band
IV
[MHz]
869 - 894
CBB852/11SK-S1
98021065
High “Q” Duplexer A+A”
824 - 835
869 - 880
CBB833.5/10SK-S1
98021082
High “Q” Duplexer, 60 W
806-816
851-861
CBB838/18SK-S1
98021021
High “Q” Duplexer ESMR
806 - 824
851 - 869
CBB862/10SK-S1
88021203
High “Q” Duplexer B
835 - 845
880 - 890
CBB862.5/10MK-S1
88021115
CELL B Duplexer
835-845
880-890
CBB918/6MK-S1
98021064
High “Q” Duplexer ESMR900/ PS9
896 - 902
935 - 941
CBB835/10MK-S1
88021114
High “Q” Duplexer A, A’ UPLINK
824 - 835
845 - 846.5
CBB880/10MK-S1
88021113
High “Q” Duplexer A, A’ DOWNLINK
869 - 880
890 - 891.5
CBB846/10MK-S1
88021112
High “Q” Duplexer B, B’ UPLINK
835 - 845
846.5 - 849
CBB891/10MK-S1
88021111
High “Q” Duplexer B, B’ DOWNLINK
880 - 890
891.5 - 894
CBB902.5/934SK-S1
98021063
High “Q” Duplexer - Paging
902 - 903
929 - 939
CBB830/3SK-S1
98021023
NPSPAC/N Duplexer
806-809
851-854
CBB862/10SK-S1
88021203
High “Q” Duplexer B
835 - 845
880 - 890
CBB845/3SK-S1
98021024
NPSPAC Duplexer
821-824
866-869
CBB836/15SK-S1
98021022
High “Q” Dual Filter Assembly SMR
806-821
851-866
CBB864/14SK-S1
98021020
High “Q” Duplexer CELLB
High “Q” PCS/X Duplexer
Call for specific frequencies
High “Q” LTE Duplexer
835-849
880-894
746-757
776-787
50-200
380-520
380- 512
380- 512
DC - 520
800 - 960
10-520
800-960
PART #
SKU #
CBBPCS/X-XSK-B10
CBB766.5/11SK-S1
82021194
CD200/450SK-E3
88021231
Description
Pass Band I
[MHz]
Pass Band
II
[MHz]
Pass Band III
[MHz]
CD520/860SK-E3
98021018
CD520/880SK-E3
98021025
CD728/6HK-D3
82021218
VHF/UHF Combiner
UHF/UHF Combiner – 406-512 MHz*
*Call for specific frequencies
Diplexer /Combiner VHF-UHF-LT
/GSM900
Cross Band Combiner VHF/UHFCELL/GSM
LTE Diplexer
710-716
740-746
CD751/887SK-F5
88021110
Combiner LTE / CELL 10W
698 - 804
824 - 950
CD751/887MK-D3
88021107
Combiner LTE / CELL 80W
698 - 804
824 - 950
CD752/859SK-D3
88021213
Combiner LTE/CELL Indoor
698-806
824-894
CD752/859SK-D3-O
88011009
Combiner LTE / CELL Outdoor
698-806
824-894
CD900/AWS/SK-B3
98021026
Combiner DC-CELL/ AWS
DC - 900
1710 - 2170
CD859/1920HK-D4
98021059
Diplexer /Combiner CELL+ PCS 150W
824 - 894
1850 - 1990
CD1000/1940SK-E3
98021060
Combiner / Injector AWS
DC - 960
1710 - 2170
CD1000/2470SK-B3
98021061
Combiner /Injector WiFi 2.4 GHz
50 - 1000
2440 - 2500
CD2400/5787.5MK-D2
98021062
Combiner /Injector WiMAX 5.8 GHz
50 - 2400
5725 - 5850
CD859/25SK-D3
98021080
Diplexer CELL AB, 60 W
824-849
869-894
CD1920/60MK-B3
88021116
Diplexer /Combiner 80W PCS full
1850 - 1910
1930 - 1990
CD1920/60MK-B7
98021078
Full Band PCS Diplexer, 100W
1850-1910
1930-1990
CD1920/60HK-B7
98021079
Full Band PCS Diplexer, 200W
1850-1910
CM742.5/892/1940SK-ST
88021108
Combiner LTE/CELL/AWS
698-787
CM710/745/782SK-D9
88021109
LTE Triplexer
704-716
777-787
734-756
CM1920/1932MK-B3
98021029
Quad Band Combiner PCS/AWS 80W
1850-1910
1710-1755
1930-1990
2110-2155
CM1920/1932MK-B3V
98021030
Quad Band Combiner PCS/AWS 50W
1850-1910
1710-1755
1930-1990
2110-2155
CD2000/2445SK-B3
88021284
WiFi Injector
50-2000
CD4XX/XSK-F3
1930-1990
824-960
1710 - 2170
LOW LOSS CROSS BAND COMBINERS
SKU #
Description
Pass Band I
[MHz]
WCM-LTE/CELL/PCS-SK-A
98021031
Combiner Full LTE / CELL / PCS 20W
698-804
Pass Band
II
[MHz]
824-894
WCM-LTE/CELL/PCS-OK-A
98021032
Combiner Full LTE / CELL / PCS 5W
698-804
824-894
WMP-LTE/824-950/PCS-SK-A2
88021204
Combiner LTE/ CELL+PCS
698-804
824-950
WCM-PS7/PS8/CELLA/PCSF-SK-A
98021056
Combiner PS7/PS8/ CELLA/PCS
763-775/851-861
793-816
WCM-PS8NEPS/CELL/PCSF-SK-A2
88021206
Combiner PS8NEPS/CELLAB/PCS
806-861
824-894
WCM-CELLA/PS9/PCS-SK-A
88021205
Combiner CELLA/PS9/PCS
824-880
WMP-PS8NEPS/CELLAB/PCS-SK-A2
98021057
Combiner PS8NEPS/CELLAB/PCS
806-816/ 851-861
WMP-UHF/800-900/PCS-SK-A2
98021072
Combiner UHF/800-900MHz/PCS
DC-512
WMP-UHF/PS8NEPS/CELLAB-SK-A2
98021058
Combiner UHF/PS8NEPS/CELLAB
806-816/851-861
WMP-LTE/CELLAB/PCS-SK-A2
88021121
698-804
WMP-CELL/PCS/AWS-SK-A2
98021027
WMP-CELL/PCS/AWS-SK-A3
98021028
WCM-PS7/PS8N/CELLAB/PCSF-SK-A
98021056
WMP-LTE/CELL/PCS-MK-A2
88021119
Combiner LTE/CELLAB/PCS
Combiner CELL/PCS/AWS
CELL/PCS Input
Combiner CELL/PCS/AWS
Individual Input
Combiner
PS7/PS8NEPS/CELLAB/PCSF
Combiner LTE/CELL/PCS
896-941
824-849
/869-894
806-960
821-849/
869-894
824-894
1850-1910/
1930-1990
1850-1910/
1930-1990
869-894/
824-849
824-894
WMP-LTE-824-950/AWS-SK-A2
88021120
Combiner LTE/CELL+AWS
698-804
WMP-PS8NEPS/CELL/PCS-SK-A1
88021122
Combiner PS8NEPS/CELL/PCS
806-816/851-861
PART #
WCM-PS7/PS8N/CELLAB/PCSF-SK-A
88021137
WMP-PS8/CELLAB/PCS-OK-A2
88701157
RCM-UHF/PS7/PS8/PS9-SK-A3
81701168
WMP-LTE/SMR/CELLA/PCS-SK-A2
98021181
WMP-CELLAB/929-942/PCS-SK-A2
88021202
WMP-LTE/CELLAB/AWS/PCS-SK-A2
88021212
WMP-SMR/N/CELLAB/PCS-SK-A1
88021357
Combiner
PS7/PS8NEPS/CELLAB/PCSF
Combiner
PS8/CELLB/PCS
Combiner in Rack
UHF/PS7/PS8/PS9
Combiner
LTE/SMR/CELLA/PCS
Combiner
CELLAB/2PGN/PCS
Combiner
LTE/CELLAB/AWS/PCS
Combiner
SMR/N, CELLAB, PCS
824-894
824-894
763-775/851-861
698-804
824-950
824-849/
869-894
763-775/ 851-861
793-816
806-824/851-869
835-849/
880-894
Pass Band III
[MHz]
Pass Band
IV
[MHz]
1850-1990
1850-1990
1850-1990
824-880
1850-1990
1850-1990
150-1990
1850-1910/
1930-1990
1850-1990
380-520
1850-1990
1710-1755/
2100-2155
1710-1755/
2100-2155
1930-1990/
1850-1910
1850-1995
1710-2170
1850-1910/
1930-1990
869-894/ 824849
1850-1910/
1930-1990
380-512
763-869
896-941
704-716/ 777-787
809-816/
854-861
824-835/
869-880
824-894
929-942
1850-1990
698-806
824-894
1710-1755
806-813/ 851-858
824-849/
869-894
1850-1910/
1930-1990
1930-1990/
1850-1910
1850-1910/
1930-1990
1850-1990
SPLITTERS/COMBINERS
PART #
MSI-LTE-B0221
MSI-LTE-B0321
MSI-LTE-B0421
SKU #
98001041
98001042
98001043
DESCRIPTION
2 way splitter, 10 W
3 way splitter, 5 W
PASS BAND
698-2700 MHz
698-2700 MHz
698-2700 MHz
MSI-LTE-B0621
98001044
698-2500 MHz
MSI-B0260
MSI-B0360
MSI-B0460
AMA-2255-2N
AMA-2255-3N
AMA-2255-4N
98001045
98001046
98001047
98001048
98001049
98001050
UHF 2 way splitter, 30 W
2 way splitter, 100 W, Low PIM
380-520 MHz
380-520 MHz
380-520 MHz
760-2500 MHz
760-2500 MHz
760-2500 MHz
DIRECTIONAL COUPLERS
PART #
MSI-LTE-B1021-3
MSI-LTE-B1021-5
MSI-LTE-B1021-6
MSI-LTE-B1021-7
MSI-LTE-B1021-10
MSI-LTE-B1021-13
MSI-LTE-B1021-15
MSI-LTE-B1021-20
MSI-CA-94N
MSI-CA-84-3
MSI-B1600-5
MSI-B1600-6
MSI-B1600-7
MSI-B1600-10
MSI-B1600-15
MSI-B1600-20
SKU #
98001033
98001017
98001013
98001015
98001016
98001197
98001014
98001034
98001035
98001149
98001036
98001037
98001038
98001039
98001153
98001040
DESCRIPTION
Directional coupler: -3 dB, 100 Watts
5 dB Directional Coupler, 50 Watt
UHF, 3 dB Directional coupler, 200 Watt
UHF, 3 dB Directional Hybrid Coupler, 160W
PASS BAND
698-2700 MHz
698-2700 MHz
698-2700 MHz
698-2700 MHz
698-2500 MHz
698-2700 MHz
698-2700 MHz
698-2500 MHz
380-520 MHz
380-520 MHz
380-520 MHz
380-520 MHz
380-520 MHz
380-520 MHz
380-520 MHz
380-520 MHz
ANTENNAS
SKU #
PART #
TDJ-801901YG
TDJ-1912YG
TDI-700/2500-K
TDJ-700/2500YG
TQI-4FC-4
TQI-4FC-5
GWY-1000
GWO-1000
98011051
98011052
98011053
98011011
98011054
98021012
93021166
93011155
LPDA-A0021-02
98011055
DESCRIPTION
10 dBi OUTDOOR 824-960 YAGI Antenna
12 dBi OUTDOOR 1850-1990 YAGI Antenna
10 dBi INDOOR Panel Antenna
11 dBi OUTDOOR Dual Band YAGI Antenna
3 dBi OUTDOOR OMNI Antenna
3 dBi INDOOR OMNI Antenna
6.5 dBi OUTDOOR YAGI Antenna
1 dBi INDOOR OMNI Antenna
11 dBi OUTDOOR Dual Band YAGI Antenna
(Economy)
PASS BAND
824-960 MHz
1850-1990 MHz
698-960 / 1700-2700 MHz
700-960 / 1710-2500 MHz
698-896 / 1700-2700 MHz
698-896 / 1700-2700 MHz
405-512 MHz
380 MHz – 6 GHz
806-1000 / 1710-2170 MHz
MISCELLANIOUS
PART #
SKU #
R445.G00.001
98001100
DESCRIPTION
Lightening Protector,
Including Gas Discharge Tube 230V, 20KA
PASS BAND
N/A
38 Leuning Street, South Hackensack, NJ 07606 I T: 201.343.6388 I F: 201.343.6390 I W: www.gwaverf.com I E: [email protected]

bda part number definition

Transcription

Similar documents

PINAMP Mini-DIL Optical Receivers

MECCOMark Mini Enclosure

This set of letters is both from the IARDC (Illinois Attorney

3.5" SATA to USB 3.0 External Hard Drive Enclosure

IC-756Pro3 -Spectrum Scope SDR Mod

FM Video and Data Radio Link 2.4 – 2.5 GHz

Key Features Benefits

MAMAC SYSTEMS® Convinced that all temp sensors are same?

Untitled - MBTA.com

Napoleon Container Terminal