Zincalum`s Products Catalogue

Transcription

1
COLOR CHART
We have 13 different colors to choose from, so you can mix and match the
colors any way you like.
Wine
Blue Navy
Ivory
Terracotta
Aquamarine
White
Brick
Sky Blue
Gray
Royal Red
Esmeralda Green
Natural Zincalum
Orange
P.O. Box 642 Urb. FerrerCalle #1 Cidra, P.R. 00739
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
2
Zincalum Manufacturing Corporation, is a distinctly Puerto Rican company established
in Cidra since 2005. Has a modern and sophisticated machinery with a complete
inventory for the manufacture all you need for construction metal building.
Zincalum® sheet steel is a 55% Al-Zn coated sheet steel product that is ideally suited
for most types of roofing applications. Zincalum® sheet steel continues to gain
approval by specifiers, architects, building owners, and many others due to its
versatility, ease of use, aesthetics and long-term performance.
•Zincalum® type "R" is a broad color range in whom is thirteen colors choosing
in gauges 24 and 26. Our Zincalum® meet specifications ASTM A-792 structural
steel Grade 50 coating AZ-55 with a siliconized polyester paint. This material
may take up to 30 years.
•Eurotile® is a pre painted galvanized steel in three colors. Coating G-90 in
gauges 24 and 26 with a siliconized polyester paint for a durability of 25 years.
•Deck type “B” is a hot dipped structural steel grade 50, coating G-90 in 18, 20,
22 gauges with or without composite, should you wish.
•Purlin structural G90 degree in gauges 12, 14 to 16 from 4” until 12” "type C
and Z '.
Our company manufactures and sales flashing, gutters, downspouts and any endings as
skylights; screws, enclosed trip, ridges, anchorages, sealants, cutting discs, tacky tape,
galvanized tubes, rolling door and more as you needed for an construction . All
materials are cut insofar accurate. The order of the production is ready before the 24
hours. Delivery service available through entire island.
Clear Acrylic
An aluminum-zinc alloy
coating about 55%
aluminum, 45% zinc
Steel Sheet
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
3
“R” Panel
SECTION PROPERTIES
NEGATIVE BENDING
POSITIVE BENDING
PANEL GAUGE
Fy
WEIGHT
Ixe
Sxe
Maxo
Ixe
Sxe
Maxo
26
60*
0.94
0.0305
0.0510
1.6297
0.0375
0.0376
1.3500
24
50
1.14
0.0407
0.0733
1.7114
0.0515
0.0527
1.5778
22
50
1.44
0.0541
0.1046
2.2236
0.0732
0.0763
2.2840
*Fy is 80 KSI is reduced to 60 KSI in accordance with the 1996 edition of the COLD-FORMED STEEL Design Manual – AISI a3.3.2.
NOTES:
1. All calculations for the properties of “R” panels are calculated in accordance with the 1996 edition of the COLD-FORMED STEEL Design
supplement – published by the American Iron and Steel Institute (AISI).
2. Ixe is for deflection determination.
3. Sxe is for Bending
4. Maxo is allowable bending moment.
5. All values are for the one foot of panel width.
Manual, with 1999
Allowable uniform loads in pounds per square foot
24 Gauge
SPAN TYPE
SINGLE
LOADTYPE
NEGATIVE WIND LOAD
LIVE LOAD/DEFLECTION
2-SPAN
NEGATIVE WIND LOAD
3-SPAN
NEGATIVE WIND LOAD
4-SPAN
NEGATIVE WIND LOAD
SPAN IN FEET
3.0
4.0
5.0
6.0
7.0
8.0
9.0
169.0
95.1
60.9
42.3
31.0
23.8
18.8
107.6
65.7
36.0
20.9
13.1
8.8
6.2
155.8
87.7
56.1
39.0
28.6
21.9
17.3
96.9
65.0
41.8
29.1
21.4
16.4
13.0
194.8
109.6
70.1
48.7
35.8
27.4
21.6
110.1
80.8
52.0
36.2
24.8
16.6
11.7
181.9
102.3
65.5
45.5
33.4
25.6
20.2
106.0
75.6
48.6
33.9
24.9
17.6
12.4
26 Gauge
SPAN TYPE
SINGLE
LOADTYPE
NEGATIVE WIND LOAD
2-SPAN
NEGATIVE WIND LOAD
3-SPAN
NEGATIVE WIND LOAD
4-SPAN
NEGATIVE WIND LOAD
SPAN IN FEET
3.0
4.0
5.0
6.0
7.0
8.0
9.0
161.0
90.5
57.9
40.2
29.6
22.6
17.9
76.3
51.2
26.2
15.2
9.6
6.4
4.5
133.3
75.0
48.0
33.1
24.5
18.8
14.8
70.0
52.5
35.5
24.8
18.2
14.0
10.8
166.7
93.8
60.0
41.7
30.6
23.4
18.5
79.6
59.7
44.1
28.6
18.0
12.1
8.5
155.6
87.5
56.0
38.9
28.6
21.9
17.3
76.6
57.4
41.3
28.8
19.1
12.8
9.0
Notes:
1.
Allowable loads are based on uniform spam lengths.
2.
LIVE LOAD is limited by bending, shear, combined shear and bending, or web crippling.
3.
DEFLECTION is limited by a deflection ratio of L/180 of the span.
4.
NEGATIVE WIND LOAD has been increased by 33.333% and does not consider fastener pullout or pullover.
5.
Panel weight has not been deducted from allowable loads.
4
Steel Deck Type B Panel
SECTION PROPERTIES
NEGATIVE BENDING
POSITIVE BENDING
PANEL GAUGE
Fy
WEIGHT
Ixe
Sxe
Maxo
Ixe
Sxe
Maxo
22
42
1.69
0.1423
0.1804
4.5370
0.1746
0.1871
4.7051
20
42
2.04
0.1811
0.2409
5.8822
0.2199
0.2393
6.0180
18
42
2.67
0.2652
0.3758
7.9744
0.2975
0.3231
8.1296
NOTES:
1. All calculations for the properties Steel Deck Type B panels are calculated in accordance with the 1996 edition of the COLD FORMED STEEL
1999 supplement – published by the American Iron and Steel Institute (AISI).
2. Ixe is for deflection determination.
3. Sxe is for Bending
4. Maxo is allowable bending moment.
5. All values are for the one foot of panel width.
Design Manual, with
Allowable uniform loads in pounds per square foot
18 Gauge
SPAN TYPE
SINGLE
LOADTYPE
NEGATIVE WIND LOAD
2-SPAN
NEGATIVE WIND LOAD
3-SPAN
NEGATIVE WIND LOAD
4-SPAN
NEGATIVE WIND LOAD
SPAN IN FEET
3.0
4.0
5.0
6.0
7.0
8.0
9.0
787.5
443.0
283.5
196.9
144.7
110.8
87.5
446.0
334.5
208.0
120.4
75.8
50.8
35.7
802.9
451.6
289.1
200.7
147.5
112.9
89.2
353.6
265.2
204.2
144.3
107.2
82.7
65.6
1003.7
564.6
361.3
250.9
184.3
141.1
111.5
401.8
301.1
241.1
177.3
132.2
95.8
67.3
937.1
527.1
337.4
234.3
172.1
131.8
104.1
386.7
290
232.0
166.5
124.0
95.8
71.5
20 Gauge
SPAN TYPE
SINGLE
LOADTYPE
NEGATIVE WIND LOAD
2-SPAN
NEGATIVE WIND LOAD
3-SPAN
NEGATIVE WIND LOAD
4-SPAN
NEGATIVE WIND LOAD
Notes:
1.
2.
3.
4.
5.
SPAN IN FEET
3.0
4.0
5.0
6.0
7.0
581.0
326.8
209.1
145.2
106.7
81.7
64.6
275.5
206.6
153.8
89.0
56.0
37.5
26.4
594.4
334.3
214.0
148.6
109.2
83.6
66.0
185.2
138.9
111.1
92.6
79.4
61.2
48.4
743.0
417.9
267.5
185.7
136.5
104.5
82.6
210.4
157.8
126.2
105.2
90.2
70.8
49.8
693.7
390.2
249.7
173.4
127.4
97.6
77.1
202.5
151.9
121.5
101.2
86.8
71.0
58.4
Allowable loads are based on uniform spam lengths.
LIVE LOAD is limited by bending, shear, combined shear and bending, or web crippling.
DEFLECTION is limited by a deflection ratio of L/180 of the span.
NEGATIVE WIND LOAD has been increased by 33.333% and does not consider fastener pullout or pullover.
Panel weight has not been deducted from allowable loads.
8.0
9.0
5
Steel Deck Type B
with composite
SECTION PROPERTIES (per feet or width)
PANEL GAUGE
t in
Sp in3
Sn in3
Ip in4
In in4
As in2
Fyksi
22
0.0295
0.172
0.180
0.146
0.182
0.478
50
20
0.0358
0.218
0.229
0.190
0.221
0.581
50
18
0.0474
0.301
0.311
0.284
0.294
0.769
40
145 pcf Normal Weight Concrete
Total
Slab
Depth D
Wt.
Conc.
MaximumUnshored
Clear Spans
4- ½”
42.4 psf
24.8 in2
5”
48.4 psf
29.3 in2
5- ½”
54.4 pdf
6”
60.5 psf
39.4 in2
Span – Feet and Inches
Gage
Single
Span
Doubl
e
Span
Triple
Span
lavg
In4/ft
Sc
In3/ft
6’-0”
6’-6”
7’-0”
7’-6”
8’-0”
8’-6”
9’-0”
9’-6”
10’-0”
10’-6”
11’-0”
11’-6”
22
5’-10”
7’-9”
7’-11”
3.573
0.887
400
343
292
251
400
189
166
146
129
114
101
90
20
6’-9”
9’-0”
9’-2”
3.854
1.052
400
400
352
303
262
229
201
178
158
140
125
111
18
7’-2”
9’-5”
9’-8”
4.333
1.345
400
400
360
310
269
235
206
182
161
142
128
115
22
5’-6”
7’-5”
7’-6”
5.107
1.087
400
400
360
309
268
233
205
180
160
142
126
113
20
6’-4”
8’-7”
8’-8”
5.496
1.291
400
400
400
373
324
283
249
220
195
174
156
140
18
6’-9”
8’-11”
9’-3”
6.160
1.653
400
400
400
383
332
290
255
226
200
179
160
143
22
5’-3”
7’-1”
7’-2”
7.022
1.293
400
400
400
370
320
279
245
216
191
170
152
136
20
6’-1”
8’-2”
8’-4”
7.544
1.538
400
400
400
400
388
339
298
264
235
209
187
168
18
6’-5”
8’-6”
8’-9”
8.431
1.972
400
400
400
400
398
348
307
271
241
215
193
173
22
5’-0”
6’-9”
6’-10”
9.360
1.503
400
400
400
400
374
326
287
253
224
199
178
159
20
5’-10”
7’-10”
7’-11”
10.036
1.791
400
400
400
400
400
397
349
309
275
245
220
197
18
6’-2”
8’-2”
8’-5”
11.187
2.301
400
400
400
400
400
400
360
318
283
253
227
204
22
4’-10”
6’-6”
6’-7”
12.157
1.717
400
400
400
400
400
374
329
290
258
229
205
183
20
5’-7”
7’-6”
7’-8”
13.012
2.048
400
400
400
400
400
400
400
355
316
282
253
227
18
5’-11”
7’-10”
8’-1”
14.468
2.636
400
400
400
400
400
400
400
366
326
291
261
235
Area
Conc.
4”
36.3 psf
20.6 in2
Superimposed Live Loads – psf: No Studs
Composite Properties
As in2
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
6
Zincalum® is an authorized dealer in Puerto Rico
Polycarbonate panels are available in 11 and 20 feet
MR 12”
38”
UP TO 39’
36”
12”
1.25”
.031”
RIDGE CAP
24”
10’6”
-
-
-
.047”
HIGH LIGHT TRANSMISSION
Coverlite® sheet offers a high degree
of light transmittance due to its high
optical properties with up to 90% light
transmission.
VIRTUALLY UNBREAKABLE
Coverlite® is economical and light in
weight, yet it's 10 times stronger than
acrylic and 200 times stronger than
glass!
EASILY FABRICATED ON SITE
Highly flexible, a Coverlite® sheet can
be easily cold formed and will not
crack or splinter when fabricated.
WARRANTY
Coverlite® carries a full 10 year
warranty against yellowing and 5 year
warranty against breakage caused by
hail.
PROPERTY
TEST METHOD
AVERAGE INDEX
Specific Gravity
ASTM D792
1.20 +/-5%
Tensile Strength
CSN11335
551 kgf/cm2
Elongation
CSN11335
50%
Compressive Strength
ASTM D695
830 kgf/cm2
Modulus of Elasticity
ASTM D638
345000PSI +/-10%
Flexural Strength
ASTM D790
950 kgf/cm2
Yellowing Index
ASTM D1925
Below 3.0
Light Transmittance
Wave Length 500nm (UV/VIS)
90%
UV-Ray Penetrability
Wave Length 300nm (UV/VIS)
(continuously exposed to sunlight for
3,000 hours)
2.4%
Impact Strength
CNS11335 (1kg. Iron ball falls from
120cm height)
Unbreakable
Inflammability
UL 94V2 (contact with flame for 10
seconds and move away)
Self-Extinguishing
Deflection Temperature
ASTM D648, 18.6 kgf/cm2
135°C. (The highest temp. is about
120°C in continuous uses)
Brittle Temperature
ASTM D764
-135°C (The lowest temp. is about
30°C in continuous uses)
Linear Thermal
Expansion Coefficient
---------------------
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
Pertains to smaller coefficient of
synthetic resin
7
Cees Purlin
Purlins available for immediately pick up
Purlin Type C 4” GA 14 X 14’
Purlin Type C 2 ½ X 10 GA 12
PurlinType C 6” GA 16 X 16’
Purlin Type C 2 ½ X 12” GA 12
Purlin Type C 3” X 10” GA 12
Purlin Type C 3 ½” X 10 GA 12
Purlin Type C 3 ½” X 10” GA14
Purlin Type C 3 ½” X 12” GA 12
Purlin also are made to the
extent that you want
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
8
Zees Purlin
Purlin Type Z 2 ½” X 6” GA 12
Purlin Type Z 3” X 10” GA 12
Purlin Type Z 2 ½” X 10 GA 12
Purlin Type Z 2 ½” X 10 GA 14
Galvanized Parts
Purlin Clip 4” GA 12
Purlin Cap 10” X 10’ GA 18
Union Purlin 4” GA 12
Union Purlin 6” GA 12
Angle 2” X 2”
Union Purlin 8”GA12
Angle 4” X 4”
Beam Clip for 6” Purlin GA 12
Beam Clip for 8” Purlin GA 12
Union Purlin
Purlin Clip
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
9
Engineering
Residential / Industrial
Punching Patterns for Cees and Zees
Pattern G
Common End
Notes:
1. Web punching is available on all 6”-10” Zees and Cees and 12” Zees.
Notes:
1. Flange punching is not available on 4” or smaller Cees and Zees.
2.All holes are 5/8”
3. All slote are 5/8” X 1”
4. Consult the light Gage Structural Institute (LGSI) Manual for engineering information.
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
10
Accessories
Residential / Industrial Elbows
4” X 4”
4” X 3”
3” X 3”
Residential / Industrial Outlet
4” X 4”
4” X 3”
3” X 3”
End Caps
Residential
Residential Gutter Corner
Exterior
Interior
Industrial
Industrial Gutter Corner
Exterior
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
Interior
11
Accessories
Corner Trim
10” and 20” feet
Exterior
Rake Trim
10” and 20” feet
Exterior
Interior
Interior
Downspout
4” X 4” Industrial
4” X 3 “Residential
Ridge cap
6.75” Each side
18” Each side
10.25” Each side
Gutter
Industrial
20’.6” and 10’.3”
Residential
20’.6” and 10’.3”
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
12
Accessories
Top Flashing
4” X 4” X 12”
6” X 6” X 12”
Pich On
12”
J Channel
10’ and 20’
Colored / Plain
Dip Flashing
Valley Trim
3” X 3” X ½” 20’ / 3” X 3” X ½” 10’
2” X 2” X ½” 10’ / 2” X 2” X ½” 20’
Peak Box
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
8 7/8” X 12’
13
Accessories
Description
Description
Bracing Assemblies Kit ½”
Bracing Assemblies Kit ¾”
Bracing Assemblies Kit 5/8”
Closure Strip Type R
Description
Driveway Medic
Asphalt Repair 6”
Eurotile Closure Strip
Tite Seal Waterproof Flashing
Cable Grip 3/8”
Tacky Tape 3/32” X ¾” X 45’
Universal Foam 1” X 1 ½” X 25
Quick Roof Metallic Finish
6” X 33”
Acrylic Sealant
Clear, Gray, White
Liquid Aluminum
Disc 4 ½” X ¼ “
With nut an without
Disc 7” X ¼ “
With nut and without
Disc 4 ½” X 3/32”
Polyurethane Sealant
Gray, White
Without nut
Disc 4 ½ “ X .045”
Without nut
Disc 14” X 3/32” X 1” STUD
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
14
Screws
STEELBINDER MAXX Teck/LAP
Description
1/4-14 X 7/8” (LAP)
(Available with color)
Drill
Point
Head Style
#3
5/16” HWH
12-14 X 3/4”
#3
5/16” HWH
12-14 X 1”
#3
5/16” HWH
12-14 X 1 ½ “
#3
5/16” HWH
12-14 X 2”
#3
5/16” HWH
12-14 X 3”
#3
WOODBINDER FASTENER
Dril
Point
Head Style
10 X 1”
S/P
¼” HWH
10 X 1 ½ “
S/P
Description
10 X 2”
S/P
¼” HWH
10 X 3”
S/P
¼” HWH
S/P
5/16” HWH
S/P
¼” HWH
S/P
¼” HWH
S/P
¼” HWH
14 X 1”
T-17
5/16” HWH
14 X ½ “
T-17
5/16” HWH
14 X 2”
T-17
5/16” HWH
12-14 X ¾ “ (LAP)
5/16” HWH
10 X 1”
(Stainless Steel Head Cap)
12-14 X 1 ¼”
#3
(Big Head)
5/16” HWH
10 X 1 ½ “
12-24 X 1 ¼ “
#5
5/16” HWH
10 X 2”
STORM PANEL SCREW
¼” HWH
Stainless steel ¼ “ X 1”
Floor Stainless steel
Wing nuts ¼” – 20
ANCHOR BOLT
“TAP COM”
STRUCTURAL SCREW BOLT AND WASHER
3/8” -16 X 3”
A-325 5/8” X 1 ½”
1 - ¾”
½ -13 X 2 ¾
A-325 5/8” X 2 ½”
2 – ¼”
½”-13 X 4 ¼”
A-325 ¾” X 1 ½”
3 – ¼”
5/8”-11 X 4 ½”
A-325 ¾” X 2 ½”
5/8”-11 X 6”
Purlin screw ½ “ X 1 ¼”
¾”-10 X 5 ½”
¼” Long Magnetic Nut Setter
5/16” Long Magnetic Nut Setter
NAILIN ANCHOR
¼” X 1”
¼” X 1- ¼”
¼” X 1- 1/2
¼” X 2”
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
15
Galvanized Pipe
12, 14 and 16 Gauges
1” X 1” X 20’
2 ½ “ X 2 ½ “ X 20’
1” X 2” X 20’
2 ½ “ X 2 ½ “ X 24’
1 ½ “ X 1 ½ “ X 20’
3” X 3” X 20’
2” X 2” X 20’
¾ “ X ¾ “ X 20’
2” X 2” X 24’
4” X 4” X 20’
2” X 4” X 20’
Aluminum
Angle 1 ½ “in 1/8 “ X 20’
Elbow 3” X 4” 75 DR
Angle 2” in 1/8” X 20’
Elbow 3” X 4” 45 DG
Angle 2” in 1/16” X 20’
Elbow 2” X 3” 30 DEG
Angle 1 ½ “ in 1/16 X 20’
Elbow 3” X 4” 30 DG
Angle 1 ¼ “ in 1/8” X 20’
Elbow 2” X 3” 75 DEG
Angle 1” in 1/8” X 20’
ElbowZig-Zag LG
Angle 1” in 1/16” X 20’
Outlet Rectangular 3” X 4”
Channel 1.25 X 1.00
Outlet Oval 4” Mill Finish
Storm “Top Channel”
Outlet Oval 3” Mill Finish
Front Fascia 3” X 20’
Outlet 2 X 3 Rectangular
Outlet Oval 3” X 4”
Outlet 2 ¾” Round
Side Fascia 4” X 20’
Outlet 2 3/8” Round
Side Fascia 4” X 30’
“Y” Funnel 2” X 3”
Hinge Pared (hembra)
“Y” Funnel 3” X 4”
Hinge Pared (macho)
Downspout .0175
2” X 3” X 10’
Aluminum Pipe Clip 3” or 4”
Downspout .019
3” X 4” X 10’
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
16
®
Eurotile® roof panel have the beauty of tile with the advantages of metal. Being light weight
Eurotile® requires a fraction of the structure that a clay tile roof requires. A roof with
Eurotile® can be easily accessed without the risk of cracking or crumbling for a beauty that
will last for generation.
The advantage of metal over the roof materials, be it clay, concrete, wood or other
compound are numerous. Metal does not break, mildew, warp, chip, rot, grow fungus, or
absorb moisture. Metal is relatively light in weight, walk able, a fire retardant and has a long
life expectancy.
Product manufactured by Zincalum Manufacturing Corporation from 26ga and 24ga.
Galvanized Steel prefinished in three colors.
Panel Net Coverage = 39”
Height = 17/8”
Standard Tile Length = 12”
Panel Length to custom size
Class A fire rated
UBC wind load 120 mph designed
The advantages of Eurotile® roof panels:
1. Stylish and attractive design, giving the appearance of a traditional roof tile.
2.Custom made for each roof. Lengths up to 40 ft, panel width 39” net.
3. Resistant to heat, hail and storm; 100% waterproof.
4. Easy and quick to install.
5. Can be installed right over the top of existing composition.
6. No problems with bad weather conditions during roof on roof assembly.
7. Reduces load bearing to a minimum (24ga and 26ga panels weigh 1lb/sf).
8. No maintenance costs, self cleaning, and moss resistant.
9. Long lasting, high quality paint and steel.
10. All necessary accessories and finishing are available.
COLORS AVAILABLE
Blue Navy
Esmeralda Green
Brick
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
17
998.6 / 39”
18.0 / 0.709 in
247.7 / 9 ¾”
47.5
1 7/8”
Advantages of Eurotile®
Eurotile®
Clay Tile
Weight
1 to 1.25 Lbs/S.F.
8 to 10 Lbs/S.F.
Required Substructure
Standard
Heavy
Cracking and Crumbeling
No
Yes
Solar Reflectance Availability
Yes
No
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
18
MAXIMUM ALLOWABLE SPANS IN FEET
FOR: EUROTILE
LIVE LOADS
3 OR MORE SPANS
(Per 1986 AISI Sections C3.2, C3.3, C3.4)
LOAD
PSF
GA
STRESS
SIMPLE SPAN
DEFL.
(L/180)
10
20
30
40
50
DELF.
(L/240)
STRESS
2 SPANS
DELF.
DEFL.
(L/180)
(L/240)
STRESS
DELF.
DELF.
(L/180)
(L/240)
26
18.7
12.2*
11.1*
18.5
16.3*
14.8*
19.9
15.3*
13.9*
24
21.0
13.1*
11.9*
20.7
17.6*
16.0*
22.4
16.6*
15.1*
22
24.2
14.5*
13.1*
23.9
19.4*
17.6*
25.8
18.2*
16.6*
26
13.2
9.7*
8.8*
13.1
12.9*
11.8*
14.1
12.2*
11.1*
24
14.9
10.4*
9.5*
14.7
14.0*
12.7*
15.8
13.2*
12.0*
22
17.1
11.5*
10.4*
16.9
15.4*
14.0*
18.2
14.5*
13.2*
26
10.8
8.4*
7.7*
10.7
10.7
10.3*
11.5
10.6*
9.7*
24
12.1
9.1*
8.3*
12.0
12.0
11.1*
12.9
11.5*
10.4*
22
14.0
10.0*
9.1*
13.8
13.4*
12.2*
14.9
12.6*
11.5*
26
9.4
7.7*
7.0*
9.2
9.2
9.2
10.0
9.7*
8.8*
24
10.5
8.3*
7.5*
10.4
10.4
10.1*
11.2
10.4*
9.5*
22
12.1
9.1*
8.3*
11.9
11.9
11.1*
12.9
11.5*
10.4*
26
8.4
7.1*
6.5*
8.3
8.3
8.3
8.9
8.9
8.1*
24
9.4
7.7*
7.0*
9.3
9.3
9.3
10.0
9.7*
8.8*
22
10.8
8.5*
7.7*
10.7
10.7
10.3*
11.5
10.7*
9.7*
Values for 3 or more spans are based on 4 spans
* Denotes load controlled by deflection
# Denotes load controlled by moment in between supports
These load capacities are for the panel itself. Frames, purlins, clips, fasteners, and all supports
must be designed to resist all loads imposed by the panel.
For full panel capacity (especially on short spans), bearing must be checked using actual loads
and bearing lengths.
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
RIDGE CAP COVER
(OPTIONAL)
19
VALLEY FLASHING
RIGDE
CAP
VALLEY CAP
(OPTIONAL)
SIDEWALL FLASHING (ANGLE IS 90°)
ENDWALL FLASHING (ANGLE VARIES
WITH PITCH)
Outside Closure
Strip
GABLE FLASHING
COVER
(OPTIONAL)
EAVE TRIM
GABLE FLASHING
Inside Closure
Strip
®
®
Trim Applications
Eurotile® is an exclusive product of Zincalum Mfg Corp
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
22
® PROFILE
For 160 MPH Exp “D”
WL = 151 PSF (Basic Areas)
WL = 302 PSF (Discontinued Areas)
For installation atop ¾” plywood
For #10 X 3” wood screws: Tall = 126 (4/3) (3/4) = 126 LB/screw
Maximum tributary area per screw = 126 LB/151 PSF
For installation atop skip sheeting
For #10 X 3” wood screws W/1” penetration: Tall = 126 (4/3) = 168 LB/screw maximum
tributary area per screw = 168/151 = 1.11sf
For installation across purlins
For #12 X 1” steelbinder screws in purlings:
Tall = 116 (4/3) = 154 LBS/ screw
Maximum tributary area per screw = 154/151 = 1.02/sf
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
23
® ROOF PANEL ASSEMBLY
Panel Loads
For 1994 UBC, exposure “C” 80 MPH wind:
Assume BLDG HT <= 30’ -0’ (W/worse case roof slope)
Wul = CeCq Qs I
Basic Wind Areas
Wul = 1.23 (1.30) (16.4) (1.0) = 26.2 PSF
Discontinous wind area
Wul = 1.23 (2.60) (16.4) (1.0) = 52.4 PSF
Panel Layout
For 1994 UBC, exposure “C” 80 MPH Wind
Use:
#10 X 1 ½” Wood screws at each tile, ends
and every other tile at basic field and each
tile at disc field W/2’-0” row spacing panels
atop ½” plywood.
Use:
#10 X 3” Wood screws at each tile ends and
every other tile at basic field and each tile at
disc field W/4’0” row spacing panels across 1
X 6 skip sheeting.
DENS-DECK FIRE AND UPLIFT RESISTANCE PROPERTIES
FIRE CLASSIFICATION
¼”
½”
5/8”
FM CLASS 1
NO
YES
YES
UL 1256
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
cUL S 126
Use:
#12-14 X 1” Sheet metal screws at each tile,
ends and every other tile at intermediate
purlins at both basic and disc areas.
Eurotile® panels are class “C” fire rated. A
class “A” fire rating may be obtained if
Eurotile is usedin conjunction with an
approved fire rated underlayment such as
dens-deck. See table
cUL S 107
UL Class A
FM wind uplift 60 and 90
PSF
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
24
EUROTILE® HIP TRIM DETAIL
GA. 26
LENGTH 10’-0”
GA. 26
LENGTH 10’-0”
Hi Rib & Corrugated Roof Flashing Details
Hip and Ridge Cap
6.75”
Gable Rake Trim
6.75”
3 X 3 Eve Trim
W Valley Flashing
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
25
Hi Rib & Corrugated Roof Flashing Details
Sidewall Flashing 90°
Endwall Flashing
Nosing
Pitch Change Flashing
Outside Corner
Inside Corner
J Trim
Base Trim or Drip Edge
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
GUTTER Residential / Industrial
Program #38 Gutter Residential
Flat 17.5
Program #5 Gutter Industrial
Flat 21.5
Program #3 Gutter Residential
Flat 18 3/8
Flat 39.125
Flat 21.5
Flat 29.5
Flat 29
26
Flashing for the “R” Panel Line
The following include cuts and finishes produced for your construction needs. Available in Zincalum and a
variety of colors. Here are some of the custom components for use of its sheet metal.
Program #
3 H Gable Trim 12” CUT
Program #21
4 H Valley 20 ¾” CUT
Program #
5 H Wall Trim 11” CUT
Program #22
6 H Apron Flashing 12” CUT
Program #23
3 Rake Trim 18 1/8” CUT
Program #31
4 Rake Trim 20 11/16” CUT
Program #27
7 H Wall Apron 10 3/8” CUT
Program #28
8 H Eave Trim 7 ¾” CUT
27
Program #30
16 H Outside Corner 14” CUT
Program #25
16 Outside Corner 16” CUT
Program #24
15 Inside Corner Trim 16” CUT
Program #
17 Door and Window Head 6 1/8” CUT
Program #
14 Eave Trim 8” CUT
Program #
19 J-Trim 6 1/8” CUT
Program #
19-B J-Trim 6 3/8” CUT
Program #
Drip Flashing Flat 4-5/8
10’-0” & 20’-0” Long
28
Program #
Drip Flashing Flat 7
10’-0” & 20’-0” Long
Ridge cap
Flat 14.50
12’-3” Long
Ridge cap
Flat 21.50
12’-3” Long
Union Purling
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945
30
Purling Clips
Phone  787.739.7770 / 787.714.5448  Fax 787.739.5945

Zincalum`s Products Catalogue

Transcription

Similar documents

2015 - Euro Ceramic Tile Distributors LTD.

Brighton Best Internation / PFC Product Catalog (PDF