ETERNUS DX80 S2/DX90 S2 Disk storage system Read

ETERNUS DX80 S2/DX90 S2 Disk storage system
P3AM-4872-02EN
Read Me First
Fujitsu would like to thank you for purchasing our ETERNUS DX80 S2/DX90 S2 Disk storage system (hereinafter referred
to as "ETERNUS DX Disk storage system").
Read this document and check the shipment package to confirm that no items are missing. Follow the setup procedures
to set up the ETERNUS DX Disk storage system.
Refer to the provided manuals or any related manuals for the ETERNUS DX Disk storage system as necessary.
Read and understand the "Safety Precautions" before use.
"Safety Precautions"
The company names and product names mentioned in this document are either registered trademarks or trademarks of their respective companies.
Copyright 2011 FUJITSU LIMITED
The information in this document is subject to change without notice for improvement and functionality expansion of the
ETERNUS DX Disk storage system.
The latest version of this document and the latest information about the ETERNUS DX Disk storage system is released at
the following website. Refer to this information as required.
http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/dx-entry/
Table of Contents
Provided Manuals ......................................2
Related Materials........................................2
Package Contents......................................3
Setup Procedures ....................................13
Terms of Use ............................................23
Provided Manuals
The manuals that are provided with the ETERNUS DX Disk storage system are listed below.
Manual Title
Manual Code
Description
ETERNUS DX80 S2/DX90 S2 Disk storage
system Overview
P3AM-4812
Describes the specifications, features, and functions of the
ETERNUS DX Disk storage system.
ETERNUS DX80 S2/DX90 S2 Disk storage
system User's Guide -Site Planning-
P3AM-4822
Describes the necessary onsite requirements for installation
of the ETERNUS DX Disk storage system.
ETERNUS DX80 S2/DX90 S2 Disk storage
system User's Guide -Installation-
P3AM-4832
Describes all the procedures that are required to start
operation of the ETERNUS DX Disk storage system.
ETERNUS DX80 S2/DX90 S2 Disk storage
system User's Guide -Operation-
P3AM-4842
Describes the operation management and maintenance of
the ETERNUS DX Disk storage system.
ETERNUS DX80 S2/DX90 S2 Disk storage
system Product List
P3AM-4852
Provides lists of the optional products for the ETERNUS DX
Disk storage system and describes possible combinations.
ETERNUS DX80 S2/DX90 S2 Disk storage
system Read Me First
P3AM-4872
Describes how the manuals are organized, package
contents, setup procedures, and the terms of use for the
ETERNUS DX Disk storage system.
ETERNUS DX80 S2/DX90 S2 Disk storage
system Read Me First for Optional Products
P3AM-5052
Describes the package contents of the optional products.
ETERNUS DX60 S2/DX80 S2/DX90 S2
Disk storage system
Read Me First for Optional Products
P3AM-5562
ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk
storage system Safety Precautions
P3AM-5062
Describes the safety precautions that must be taken for the
ETERNUS DX Disk storage system.
ETERNUS DX80 S2/DX90 S2 Disk storage
system Feature activation licenses
P3AM-5072
Explains how to activate the license for the Thin
Provisioning feature of the ETERNUS DX Disk storage
system.
ETERNUS Web GUI User's Guide
-ETERNUS DX80 S2/DX90 S2, ETERNUS
DX410 S2/DX440 S2-
P2X0-1090
Explains how to monitor and set the ETERNUS DX Disk
storage system via Graphical User Interface (GUI).
ETERNUS CLI User's Guide
-ETERNUS DX80 S2/DX90 S2, ETERNUS
DX410 S2/DX440 S2-
P2X0-1030
Explains how to monitor and set the ETERNUS DX Disk
storage system via Command Line Interface (CLI).
ETERNUS DX80 S2/DX90 S2, ETERNUS
DX410 S2/DX440 S2
SMI-S User's Guide
P3AM-4602
Explains how to use the SMI-S compliant general storage
management application to manage the ETERNUS DX
Disk storage system.
Related Materials
Other manuals for the ETERNUS DX Disk storage system are as follows:
Manual Title
Description
ETERNUS DX Disk storage systems User's Guide -Server
Connection- (*1)
Explains how to connect the ETERNUS DX Disk storage
system to a server.
*1: Download the necessary manuals for the customer operating environment (for server OS, host interface type, etc.) from the specified website.
For the URL of the download website, refer to the Documentation CD provided with the ETERNUS DX Disk storage system.
2
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Package Contents
Store the package contents in a safe and secure location, as they may be needed again when making changes to the
system or reinstalling the software.
Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.
ETERNUS DX80 S2/DX90 S2 (2.5inch)
The product name and ID are listed below.
Product Name
Product ID
ETERNUS DX80 S2 (2.5inch, dual-controller type)
ET082DCU
ETERNUS DX80 S2 (2.5inch, single-controller type)
ET082SCU
ETERNUS DX90 S2 (2.5inch, dual-controller type)
ET092DCU
ETERNUS DX90 S2 (2.5inch, single-controller type)
ET092SCU
Check the shipment package to confirm that the following items are not missing.
FF
Controller Enclosure (x 1)
FF
Flange cover (x 1)
FF
AC200V cable (x 2) IEC60320-C13↔NEMA L6-15P (4m)
FF
Pin (x 1)
Used to push the FUNCTION button of the controller enclosure.
FF
FF
Rack rail (x 1 set)
FF
FF
Network Settings label (x 1)
:
.
.
.
:
:
.
.
.
.
.
.
:
.
.
.
DE_No.Label (x 1)
M5 screw (x 4)
for mounting the enclosure
FF
M5 screw (x 8)
FF
for attaching the rack rails
FF
Washer (x 8)
FF
Bracket (x 2)
Destination label (x 1)
DX80 S2/DX90 S2 CABLE MAKING
FF
FF
FF
for the QSFP cable
Read Me First (this document) (x 1)
Safety Precautions (x 1)
Documentation CD (x 1)
3
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
ETERNUS DX80 S2/DX90 S2 (3.5inch)
The product name and ID are listed below.
Product Name
Product ID
ETERNUS DX80 S2 (3.5inch, dual-controller type)
ET082DDU
ETERNUS DX80 S2 (3.5inch, single-controller type)
ET082SDU
ETERNUS DX90 S2 (3.5inch, dual-controller type)
ET092DDU
ETERNUS DX90 S2 (3.5inch, single-controller type)
ET092SDU
Check the shipment package to confirm that the following items are not missing.
FF
Controller Enclosure (x 1)
FF
Flange cover (x 1)
FF
AC200V cable (x 2) IEC60320-C13↔NEMA L6-15P (4m)
FF
Pin (x 1)
Used to push the FUNCTION button of the controller enclosure.
FF
FF
Rack rail (x 1 set)
FF
M5 screw (x 4)
for mounting the enclosure
FF
Network Settings label (x 1)
:
.
.
.
:
:
.
.
.
.
.
.
:
.
.
.
FF
DE_No.Label (x 1)
FF
Destination label (x 1)
M5 screw (x 8)
for attaching the rack rails
FF
Washer (x 8)
FF
Bracket (x 2)
DX80 S2/DX90 S2 CABLE MAKING
FF
FF
FF
for the QSFP cable
Read Me First (this document) (x 1)
Safety Precautions (x 1)
Documentation CD (x 1)
4
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Drive enclosure (2.5inch)
The product name and ID are listed below.
Product Name
Product ID
Drive enclosure for DX80 S2/DX90 S2 (2.5inch, dual-IOM type)
ETEAD2CU
Drive enclosure for DX80 S2/DX90 S2 (2.5inch, single-IOM type)
ETEAD1CU
Check the shipment package to confirm that the following items are not missing.
FF
Drive Enclosure (x 1)
FF
QSFP cable QSFP↔QSFP (0.75m)
QQ x
QQ x
FF
FF
Flange cover (x 1)
FF
Rack rail (x 1 set)
FF
M5 screw (x 4)
2 (dual-IOM type)
1 (single-IOM type)
AC200V cable (x 2) IEC60320-C13↔NEMA L6-15P (4m)
for mounting the enclosure
FF
M5 screw (x 8)
for attaching the rack rails
FF
Washer (x 8)
FF
Bracket (x 2)
5
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Drive enclosure (3.5inch)
The product name and ID are listed below.
Product Name
Product ID
Drive enclosure for DX80 S2/DX90 S2 (3.5inch, dual-IOM type)
ETEAD2DU
Drive enclosure for DX80 S2/DX90 S2 (3.5inch, single-IOM type)
ETEAD1DU
Check the shipment package to confirm that the following items are not missing.
FF
Drive Enclosure (x 1)
FF
QSFP cable QSFP↔QSFP (0.75m)
QQ x
QQ x
FF
FF
Flange cover (x 1)
FF
Rack rail (x 1 set)
FF
M5 screw (x 4)
2 (dual-IOM type)
1 (single-IOM type)
AC200V cable (x 2) IEC60320-C13↔NEMA L6-15P (4m)
for mounting the enclosure
FF
M5 screw (x 8)
for attaching the rack rails
FF
Washer (x 8)
FF
Bracket (x 2)
6
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Disk Drive (2.5inch)
The product name and ID are listed below.
Product Name
Product ID
Disk Drive(2.5inch) 300GB 10krpm x1 for DX80 S2/DX90 S2
ETED3HC
Disk Drive(2.5inch) 450GB 10krpm x1 for DX80 S2/DX90 S2
ETED4HC
Disk Drive(2.5inch) 600GB 10krpm x1 for DX80 S2/DX90 S2
ETED6HC
Disk Drive(2.5inch) 900GB 10krpm x1 for DX80 S2/DX90 S2
ETED9HC
Disk Drive(2.5inch) 300GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2
ETED3MC
Disk Drive(2.5inch) 450GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2
ETED4MC
Disk Drive(2.5inch) 600GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2
ETED6MC
Disk Drive(2.5inch) 900GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2
ETED9MC
Disk Drive(2.5inch) 300GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2
ETED3PC
Disk Drive(2.5inch) 450GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2
ETED4PC
Disk Drive(2.5inch) 600GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2
ETED6PC
Disk Drive(2.5inch) 900GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2
ETED9PC
Disk Drive(2.5inch) 300GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2
ETED3DC
Disk Drive(2.5inch) 450GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2
ETED4DC
Disk Drive(2.5inch) 600GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2
ETED6DC
Disk Drive(2.5inch) 900GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2
ETED9DC
Disk Drive(2.5inch) 300GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETED3SC
Disk Drive(2.5inch) 450GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETED4SC
Disk Drive(2.5inch) 600GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETED6SC
Disk Drive(2.5inch) 900GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETED9SC
Check the shipment package to confirm that the following items are not missing.
FF
Disk Drive
Installed in the controller enclosure or drive enclosure.
QQ x
1
2 (RAID1)
QQ x 6 (RAID5, RAID6, RAID1+0)
QQ x
7
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Disk Drive (3.5inch)
The product name and ID are listed below.
Product Name
Product ID
Disk Drive(3.5inch) 300GB 15krpm x1 for DX80 S2/DX90 S2
ETED3HD
Disk Drive(3.5inch) 450GB 15krpm x1 for DX80 S2/DX90 S2
ETED4HD
Disk Drive(3.5inch) 600GB 15krpm x1 for DX80 S2/DX90 S2
ETED6HD
Disk Drive(3.5inch) 1TB 7.2krpm x1 for DX80 S2/DX90 S2
ETEN1HD
Disk Drive(3.5inch) 2TB 7.2krpm x1 for DX80 S2/DX90 S2
ETEN2HD
Disk Drive(3.5inch) 3TB 7.2krpm x1 for DX80 S2/DX90 S2
ETEN3HD
Disk Drive(3.5inch) 300GB 15krpm x2 (RAID1) for DX80 S2/DX90 S2
ETED3MD
Disk Drive(3.5inch) 450GB 15krpm x2 (RAID1) for DX80 S2/DX90 S2
ETED4MD
Disk Drive(3.5inch) 600GB 15krpm x2 (RAID1) for DX80 S2/DX90 S2
ETED6MD
Disk Drive(3.5inch) 1TB 7.2krpm x2 (RAID1) for DX80 S2/DX90 S2
ETEN1MD
Disk Drive(3.5inch) 2TB 7.2krpm x2 (RAID1) for DX80 S2/DX90 S2
ETEN2MD
Disk Drive(3.5inch) 3TB 7.2krpm x2 (RAID1) for DX80 S2/DX90 S2
ETEN3MD
Disk Drive(3.5inch) 300GB 15krpm x6 (RAID5) for DX80 S2/DX90 S2
ETED3PD
Disk Drive(3.5inch) 450GB 15krpm x6 (RAID5) for DX80 S2/DX90 S2
ETED4PD
Disk Drive(3.5inch) 600GB 15krpm x6 (RAID5) for DX80 S2/DX90 S2
ETED6PD
Disk Drive(3.5inch) 1TB 7.2krpm x6 (RAID5) for DX80 S2/DX90 S2
ETEN1PD
Disk Drive(3.5inch) 2TB 7.2krpm x6 (RAID5) for DX80 S2/DX90 S2
ETEN2PD
Disk Drive(3.5inch) 3TB 7.2krpm x6 (RAID5) for DX80 S2/DX90 S2
ETEN3PD
Disk Drive(3.5inch) 300GB 15krpm x6 (RAID6) for DX80 S2/DX90 S2
ETED3DD
Disk Drive(3.5inch) 450GB 15krpm x6 (RAID6) for DX80 S2/DX90 S2
ETED4DD
Disk Drive(3.5inch) 600GB 15krpm x6 (RAID6) for DX80 S2/DX90 S2
ETED6DD
Disk Drive(3.5inch) 1TB 7.2krpm x6 (RAID6) for DX80 S2/DX90 S2
ETEN1DD
Disk Drive(3.5inch) 2TB 7.2krpm x6 (RAID6) for DX80 S2/DX90 S2
ETEN2DD
Disk Drive(3.5inch) 3TB 7.2krpm x6 (RAID6) for DX80 S2/DX90 S2
ETEN3DD
Disk Drive(3.5inch) 300GB 15krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETED3SD
Disk Drive(3.5inch) 450GB 15krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETED4SD
Disk Drive(3.5inch) 600GB 15krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETED6SD
Disk Drive(3.5inch) 1TB 7.2krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETEN1SD
Disk Drive(3.5inch) 2TB 7.2krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETEN2SD
Disk Drive(3.5inch) 3TB 7.2krpm x6 (RAID1+0) for DX80 S2/DX90 S2
ETEN3SD
Check the shipment package to confirm that the following items are not missing.
FF
Disk Drive
Installed in the controller enclosure or drive enclosure.
QQ x
1
QQ x 2 (RAID1)
QQ x 6 (RAID5, RAID6, RAID1+0)
8
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
SSD (2.5inch)
The product name and ID are listed below.
Product Name
Product ID
SSD (2.5inch) 100GB x1 for DX80 S2/DX90 S2
ETES1HC
SSD (2.5inch) 200GB x1 for DX80 S2/DX90 S2
ETES2HC
SSD (2.5inch) 100GB x2 (RAID1) for DX80 S2/DX90 S2
ETES1MC
SSD (2.5inch) 200GB x2 (RAID1) for DX80 S2/DX90 S2
ETES2MC
SSD (2.5inch) 100GB x4 (RAID5) for DX80 S2/DX90 S2
ETES1PC
SSD (2.5inch) 200GB x4 (RAID5) for DX80 S2/DX90 S2
ETES2PC
SSD (2.5inch) 100GB x6 (RAID1+0) for DX80 S2/DX90 S2
ETES1SC
SSD (2.5inch) 200GB x6 (RAID1+0) for DX80 S2/DX90 S2
ETES2SC
Check the shipment package to confirm that the following items are not missing.
FF
SSD
Installed in the controller enclosure or drive enclosure.
QQ x
1
2 (RAID1)
QQ x 4 (RAID5)
QQ x 6 (RAID1+0)
QQ x
9
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
SSD (3.5inch)
The product name and ID are listed below.
Product Name
Product ID
SSD (3.5inch) 100GB x1 for DX80 S2/DX90 S2
ETES1HD
SSD (3.5inch) 200GB x1 for DX80 S2/DX90 S2
ETES2HD
SSD (3.5inch) 100GB x2 (RAID1) for DX80 S2/DX90 S2
ETES1MD
SSD (3.5inch) 200GB x2 (RAID1) for DX80 S2/DX90 S2
ETES2MD
SSD (3.5inch) 100GB x4 (RAID5) for DX80 S2/DX90 S2
ETES1PD
SSD (3.5inch) 200GB x4 (RAID5) for DX80 S2/DX90 S2
ETES2PD
SSD (3.5inch) 100GB x6 (RAID1+0) for DX80 S2/DX90 S2
ETES1SD
SSD (3.5inch) 200GB x6 (RAID1+0) for DX80 S2/DX90 S2
ETES2SD
Check the shipment package to confirm that the following items are not missing.
FF
SSD
Installed in the controller enclosure or drive enclosure.
QQ x
1
2 (RAID1)
QQ x 4 (RAID5)
QQ x 6 (RAID1+0)
QQ x
10
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Host Interface(FC、10Gbit/s iSCSI、FCoE)
The product name and ID are listed below.
Product Name
Product ID
Host interface for DX80 S2/DX90 S2 (FC, 2port)
ETEHF12
Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port)
ETEHX12
Host interface for DX80 S2/DX90 S2 (FCoE, 2port)
ETEHC12
Check the shipment package to confirm that the following items are not missing.
FF
Host interface adapter (x 1)
Installed in the controller enclosure.
Host Interface(1Gbit/s iSCSI)
The product name and ID are listed below.
Product Name
Product ID
Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)
ETEHL12
Check the shipment package to confirm that the following items are not missing.
FF
Host interface adapter (x 1)
Installed in the controller enclosure.
Host Interface(SAS)
The product name and ID are listed below.
Product Name
Product ID
Host interface for DX80 S2/DX90 S2 (SAS, 2port)
ETEHS12
Check the shipment package to confirm that the following items are not missing.
FF
Host interface adapter (x 1)
Installed in the controller enclosure.
11
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Thin Provisioning Feature
The product name and ID are listed below.
Product Name
Product ID
Thin Provisioning Feature License for DX80 S2
ETEL8T
Thin Provisioning Feature License for DX90 S2
ETEL9T
Check the shipment package to confirm that the following items are not missing.
FF
License label (x 1)
FF
Release Tie (x 1)
12
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Setup Procedures
STEP
Preparation
An installation space and network environment must be prepared in advance.
Prepare the following manuals:
QQ Documentation
CD
QQ Other related manuals, for example, for a server or networking equipment.
Installation space
Installation space
Check that the installation area meets the space requirements of the rack in which the ETERNUS DX Disk
storage system is to be installed.
Environmental considerations for installation
Refer to "2.1 Installation Specifications" of "ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide
-Site Planning-" and check that the service area and environmental conditions (temperature and humidity)
are satisfied.
Power outlets
Refer to "2.5 Outlet/Socket Specifications" of "ETERNUS DX80 S2/DX90 S2 Disk storage system User's
Guide -Site Planning-" and check that a sufficient number of suitable wall outlets are available.
QQ-Site
Planning- "2.1 Installation Specifications"
QQ-Site
Planning- "2.5 Outlet/Socket Specifications"
network environment
QQ-Installation-
"1.1 Connection Preparation"
QQ-Installation-
"1.2 Setup Preparation"
QQETERNUS
Web GUI User’s Guide
Completing and attaching the Network Settings label
Complete the following information in the Network Settings label and attach it on the ETERNUS DX Disk
storage system.
QQ IP
QQ IP
address and subnet mask for the ETERNUS DX Disk storage system
address for maintenance work
Settings for the PC
QQ Setup
Network Environment
ŽŽ IP
address : 192.168.1.2
ŽŽ Subnet mask : 255.255.255.0
QQ Set
the Web browser
Refer to "ETERNUS Web GUI User’s Guide" for details on the settings that are required.
13
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
STEP
Installation in a Rack
The rack rail needs to be attached to the rack and the ETERNUS DX Disk storage system mounted.
-Installation- "Chapter 3 Rack Installation"
IMPORTANT ●●Multiple Drive Enclosures must be connected to the controller enclosure following the order of the
"DE_No. label" numbers attached to each Drive Enclosure. The position of the labels are in the
positions shown below.
Right front side of the drive enclosure
Rear upper side of the drive enclosure
DE_No. labels
●●Mount enclosures and other devices by starting from the bottom of the rack and work upward. Tall
racks (such as the 40U/36U) have a higher center of gravity and anti-toppling measures are required.
1.Adjust the rack rail size to fit the rack.
2.Attach the rack rails to the rack.
The size of the ETERNUS DX Disk storage
system is 2U.
The M5 screw positions for the rack rails are determined relative to the enclosure base line.
Insert the M5 screws in the 1st and 6th holes on the front rack pillars above the base line and in the 2nd
and 5th holes on the rear rack pillars above the base line as shown in the figures below:
14
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
1.Install the drive enclosure in the rack.
IMPORTANT Make sure to install or remove the enclosure to or from the rack by two or more people.
2.Fix the drive enclosure in the rack.
Use four M5 screws to fasten it in the rack.
3.Attach the brackets to the rack rails.
Use the thumb screws to attach the brackets to left rack rail and the right rack rail.
Attachment location of the bracket
2.5" controller
enclosure
3.5" controller
enclosure
2.5" drive
enclosure
3.5" drive
enclosure
Bracket
Thumb screw
15
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
STEP
Cable Connection
Various cables need to be connected to the rear of the ETERNUS DX Disk storage system.
Point
To help with cable management and prevent incorrect connection, attach labels to the cables and make
a note of connection origins and destinations.
IMPORTANT The cables should never be bent, twisted or pulled.
LAN Cable (For Operation Management)
Connect the LAN cables (for operation management) to the MNT ports.
Cable
Rear view
Controller (CM#0)
Controller (CM#1)
Controller enclosure
RMT port
MNT port
RMT port
MNT port
-Installation- "4.1 LAN Cable Connection (For Operation Management)"
Host Interface Cable
Connect a Host Interface cable to each of these ports.
Cable
Rear view
QQ FC,10Gbit/s
iSCSI, FCoE
CA#0
CA#1
CA#0
CA#1
Controller enclosure
QQ 1Gbit/s
iSCSI
FC、 10Gbit/s iSCSI、 FCoE
QQ SAS
Port#0
1Gbit/s iSCSI
Port#1
Port#0 Port#1
SAS
Port#0
Port#1
-Installation- "4.2 Host Interface Connection"
QSFP Cables
When Drive Enclosures are installed, QSFP cables are used to connect between the DI ports of the
enclosures.
16
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Cable
Rear view
Attach the destination labels to
the QSFP cable plugs
the DI (OUT) side plug
Connect the Controller Enclosure to Drive Enclosure 1, Drive Enclosure
1 to Drive Enclosure 2, Drive Enclosure 2 to Drive Enclosure 3, etc. The
number of Drive Enclosure can be checked with the "DE_No." label.
Example for connection of QSFP cable
(when two Drive Enclosures are installed)
the DI (IN) side plug
DI (OUT) port
DI (IN) port
DI (OUT) port
DI (IN) port
Drive enclosure 2
Drive enclosure 1
Controller enclosure
DI (OUT) port
DI (OUT) port
The DI (OUT) port is on the left side, and DI (IN) port is on the right side.
Plug the connectors on which the " " symbol is printed into the DI (OUT)
ports.
Plug the connectors on which the " " symbol is printed into the DI (IN)
ports.
-Installation- "4.3 Drive Enclosure Connection"
Power Cords
Use release ties to hold the power cords in place.
Cable
Rear view
Drive enclosure 1
Controller enclosure
-Installation- "4.4 Power Cord Connection"
17
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
STEP
Basic Setup
Use ETERNUS Web GUI to perform a basic setup of the ETERNUS DX Disk storage system.
ETERNUS DX Disk Storage System and PC Terminal Connection
Connect a PC terminal to the ETERNUS DX Disk storage system.
Connect the PC terminal to the MNT port of ETERNUS DX Disk storage system Controller 0 (CM#0) directly
with the LAN cable (for operation management).
LAN port
PC terminal
LAN cable
MNT port of Controller 0 (CM#0)
ETERNUS DX
Disk storage system
-Installation- "5.1.1 ETERNUS DX Disk Storage System and PC Terminal Connection"
Powering On
Turn on the PC terminal and the ETERNUS DX Disk
storage system.
Drive enclosure
Power switch
IMPORTANT W hen tur ning on the E TER N US DX
Disk storage system for the first time,
volume formatting operation, which is set
as factory default, may be performed.
Drive enclosure
Controller enclosure
H o w e v e r, t h e E T E R N U S D X D i s k
storage system setting operation can be
continued.
-Installation- "5.1.2 Powering On"
ETERNUS Web GUI Startup
1.Open the Web browser on the PC terminal.
2.Enter either of the following URLs in the address
bar of the Web browser.
http://192.168.1.1/
The login screen for ETERNUS Web GUI
appears.
3.To change the user interface language, click
the [Option] button and select "English" or
"Japanese" in "Language".
4.Enter the Username and Password.
User name: root
Password: root (by default)
After logging in, the Initial Settings screen of
ETERNUS Web GUI appears.
-Installation- "5.1.3 ETERNUS Web GUI Startup"
18
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Initial Setup
Perform the settings that are required before the operation of the ETERNUS DX Disk storage system is
started.
For initial setup, perform "Initial Setup 1" followed by "Initial Setup 2".
FF
Initial Setup 1
The following basic settings for the ETERNUS
DX Disk storage system are performed:
QQ Set
Storage Name
Date and Time
QQ Change Password
QQ Register Thin Provisioning License
QQ Register Copy License
QQ Set Network Environment
QQ Set
After "Initial Setup 1" is complete, remove the LAN cable (for operation management) from the PC
terminal and connect the LAN cables (for operation management) from the MNT ports on both controller
0 and controller 1 to the customer network.
After that, start the web browser from the PC terminal that is connected to the network.
Log on again with the set IP address, and start "Initial Setup 2".
FF
Initial Setup 2
The following environment settings for event
notification when an error (event) occurs in the
ETERNUS DX Disk storage system are performed:
QQ Set
SNMP Agent Basic
SNMP Manager
QQ Set SNMP Agent MIB View
QQ Set SNMP Agent User
QQ Set SNMP Agent Community
QQ Set SNMP Agent Trap
QQ Set E-Mail Notification
QQ Set Syslog Notification
QQ Set
To display the Initial Setup screen:
Click [Start Initial Setup] in [Action] on the [System] tab.
-Installation- "5.1.4 Initial Setup"
19
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
RAID Configuration Settings
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX Disk storage system.
Perform the following settings:
QQ RAID
group creation
creation
QQ Hot spare registration
QQ Volume
Point
This setting is not required if the factory default settings are to be used. To change the factory default
settings, refer to "ETERNUS Web GUI User's Guide".
FF
RAID group creation
Create RAID groups to create volumes.
To display the screen to create RAID groups:
Click [Create] in [Action] on the [RAID Group] tab.
FF
Volume creation
Create volumes in the RAID group.
To display the screen to create volumes.
Click [Create] in [Action] on the [Volume] tab.
FF
Hot spare registration
Register the hot spare for the failure of a drive.
To display the screen to register the hot spare:
Click [Disks] in [Category] on the [Component]
tab.
ŽŽ Global
Hot Spare registration
Select the drive that is to be registered as the
Global Hot Spare and click [Assign Global HS]
in [Action].
ŽŽ Dedicated
Hot Spare registration
Select the drive that is to be registered as
the Dedicated Hot Spare and click [Assign
Dedicated HS] in [Action].
-Installation- "5.1.5 RAID Configuration Settings"
20
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Host Affinity Settings
The host affinity settings ensure security when multiple servers are connected by assigning the host interface
ports that the hosts (servers) can access and the volumes that the hosts (servers) can recognize.
Set host affinity in the following order:
1.Host addition
Add the information on the hosts (servers) that
access the ETERNUS DX Disk storage system.
To display the screen to add the hosts (example
for FC or FCoE hosts):
Click [Add FC/FCoE Host] in [Action] under [Host
Group] in [Category] on the [Connectivity] tab.
2.Port parameter settings
Set the connection information between the host
interface port and the server.
To display the screen to set the port parameters
(example for FC Port):
Click [FC] under [Port Group] in [Category] on
the [Connectivity] tab. Select the checkbox for
the FC port to set the port parameters for on the
[Port List] screen and then click [Modify FC Port
Parameters] in [Action].
3.Port group creation
Create a port group for a host to access the
ETERNUS DX Disk storage system.
To display the screen to create a port group
(example for FC Port):
Click [Create FC Port Group] in [Action] under
[Port Group] in [Category] on the [Connectivity]
tab.
4.LUN group addition
Add a group of volumes that can be recognized
by the host (LUN group).
To display the screen to add a LUN group.
Click [Add LUN Group] in [Action] under [LUN
Group] in [Category] on the [Connectivity] tab.
5.Host affinity creation
Create an association between a host group and
a port group and an association between a host
group and a LUN group.
To display the screen to create a host affinity.
Click [Create Host Affinity] in [Action] on the
[Connectivity] tab.
-Installation- "5.1.6 Host Affinity Settings"
21
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
STEP
Monitoring Setup
Perform the ETERNUS DX Disk storage system monitoring setup if required.
QQ Notification
of the ETERNUS DX Disk storage system problems as they occur is possible if the event
notification method and level have been set.
QQ If
remote support is required, the ETERNUS DX Disk storage system needs to be set to notify the remote
support center of failures.
Point
Remote support allows prompt detection and resolution of trouble.
-Installation- "5.2 ETERNUS DX Disk Storage System Monitoring Setup"
STEP
Server Connection
Perform the settings required to connect to the server and install the required drivers. Perform the settings
required for network devices connecting the server and the ETERNUS DX Disk storage system.
After the server connection setup, confirm that the volumes in the ETERNUS DX Disk storage system can be
recognized by the server.
All necessary settings are complete, and the ETERNUS DX Disk storage system is now ready for normal operation.
QQ-InstallationQQ-Server
STEP
"5.4 Server Connection Setup"
Connection-
Operation and Maintenance
Status check
The status of the ETERNUS DX Disk storage system should be regularly monitored by checking the LEDs
and using the Web browser.
Data backup
Important data should be regularly backed up to a tape drive or similar device as a precaution against system
failures.
Maintenance support period
The standard maintenance support period for ETERNUS DX Disk storage system is five years from the date
of purchase, or is defined in your service level agreement (SLA). Contact your sales representative for details
if you prefer to extend the period.
QQ-Operation-
"4.2 Monitoring ETERNUS DX Disk Storage System Status"
QQ-Operation-
"6.1 Periodic Backup"
QQ-Operation-
"6.4 Maintenance Service"
22
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
Terms of Use
QQ Applicable Environment
The ETERNUS DX Disk storage system was designed and manufactured for general office use, with user safety in mind. When using the ETERNUS DX
Disk storage system, follow the handling instructions, placement and cautionary notes listed in this guide. If used beyond the limits described, the
users may be at risk of personal injury and/or material damage.
QQ Using the Manuals
The manuals provided with the ETERNUS DX Disk storage system contain important information regarding safe usage.
Please read this manual carefully before using the ETERNUS DX Disk storage system. Pay special attention to "ETERNUS DX80 S2/DX90 S2 Disk storage
system Safety Precautions", and understand the contents thoroughly before connecting.
Keep these manuals in a safe place for future reference.
Fujitsu pays careful attention to the safe use of its products to prevent user injury and/or material damage. To use the ETERNUS DX Disk storage system
properly, please follow the instructions in this manual.
QQ Compliance standards
Product safety
Electromagnetic Compatibility
UL60950-1, CSA-C22.2 No. 60950-1, EN60950-1, IEC60950-1, GOST-R
CNS13438(C6357) Class A, FCC CFR47 part 15 Class A, ICES-003 Class A,EN55022 Class A, VCCI
Class A, AS/NZS CISPR22 Class A
EN55024
Electromagnetic Compatibility Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
RoHS-compliant (Restriction of hazardous substances)
WEEE-compliant (Waste electrical and electronic equipment)
Electromagnetic Immunity
CE certification
Environmental compliance
This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use,
household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or
dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter
"High Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility, air craft flight control, air traffic control,
mass transport control, medical life support system, missile launch control in weapon system. You shall not use this Product without securing the
sufficient safety required for the High Safety Required Use. If you wish to use this Product for High Safety Required Use, please consult with our sales
representatives in charge before such use.
Class 1 laser product
Electronic intelligence product pollution control mark of the People's Republic of China.
23
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN
ETERNUS DX80 S2/DX90 S2 Disk storage system
Read Me First
P3AM-4872-02EN
Date of issuance: September 2011
Issuance responsibility: FUJITSU LIMITED
Printed in Japan
● The contents of this manual are liable to being updated without notice.
● While the contents of this manual are the product of all due care and
diligence, no responsibility can be accepted for operational problems
arising from any errors or missing information, or other use of the
information contained in this manual.
● Fujitsu assumes no liability for damages to third party copyrights or other
rights arising from the use of any information in this manual.
● Contents of this manual are not to be reproduced without permission
from Fujitsu.
● Manuals with missing or wrongly collated pages will be replaced free of
charge.
This manual uses recycled paper.
24
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2011 FUJITSU LIMITED
P3AM-4872-02EN