docFlexible Shaft Power Tool Selection Guide
download 
Report Transcription
Flexible Shaft Power Tool Selection Guide
Flexible Shaft Power Tool Selection Guide– A Foredom Motor Series consists of three models of the same motor: 1. Hang-Up these require Specifications Performance Ratings Replacement Parts 2. Bench SR Hang-Up SRB Bench SRM Bench with dial control SRH Hang-Up SRBH Bench SRMH Bench with dial control TX Powerful All Purpose Reversing Heavy Duty Shaft Version of SR Made to CE Standard SR CE Hang-Up Hang-Up TXB Bench TXM Bench with dial control TXH Hang-Up More Power at All Speeds Heavy Duty Shaft Version TXBH Bench Page No. 6 6 7 8 8 TXMH Bench with dial control of TX LX Hang-Up Most LXB Bench LXM Bench with dial control LXH Hang-Up LXBH Bench LXMH Bench with dial control PGX PowerGraver Hang-Up ® speed controls 3. Bench with a built-in dial speed control. Special Feature Motor Series and Styles ] Power at Low Speed Heavy Duty Shaft Version of LX Power Assisted Engraving 10 10 9 Motor Specifications* See Note Below 1/6 Horsepower 18,000 RPM Max. Universal Motor Ball Bearing Amps AC– 1.7 115V .9 230V Watts–125 1/6 Horsepower 18,000 RPM Max. Universal Motor Ball Bearing Amps AC– 1.7 115V .9 230V Watts–125 1/6 Horsepower 18,000 RPM Max. Universal Motor Ball Bearing Amps AC– .9 230V Watts–125 Hang-Up 93 Inner Shaft 77 Outer Sheath 132P Motor Brushes 10823 Inner Shaft 10801TX Outer Sheath (includes 10819) 10819 Silencer 10816TX Complete Assembly (10823, 10801TX, 10819) 132P Motor Brushes 93 Inner Shaft 77 Outer Sheath 1/3 Horsepower 15,000 RPM Max. Permanent Magnet Ball Bearing Amps AC– 3.5 115V Watts–250 10823 Inner Shaft 10801TX Outer Sheath (includes 10819) 10819 Silencer 10816TX Complete Assembly (10823, 10801TX, 10819) 319P Motor Brushes 1/20 Horsepower 2,800 RPM Max. Permanent Magnet Ball Bearing Amps AC– 1.2 115V .6 230V Watts–40 Speed Control Specifications 115V 230V FCT/FCH EM/EMH FCT-1, SCT-1 FCH-2, SCH-2 SCT/SCH Amps– 4 Hz– 60 Amps– 3 Hz– 50 SRM has dial control in base EM-1 Amps– 1.5 Hz– 60 EMH-2 Amps– 2 Hz– 50 FCT/FCH FCT-1, SCT-1 FCH-2, SCH-2 EM/EMH SCT/SCH Amps– 4 Hz– 60 Amps– 3 Hz– 50 SRMH has dial control in base EM-1 Amps– 1.5 Hz– 60 EMH-2 Amps– 2 Hz– 50 FCT-2CE N/A FCT-2CE Amps– 3 Hz– 50 132P Motor Brushes 93 Inner Shaft 77 Outer Sheath 319P Motor Brushes 1/10 Horsepower 5,000 RPM Max. Permanent Magnet Ball Bearing Amps AC– 1.2 115V .6 230V Watts–75 Bench with built-in control Replacement Shafts, Sheaths, Motor Brushes Speed Control Options See Pg 18 for complete listing Foot Manual (Dial) 1/3 Horsepower 15,000 RPM Max. Permanent Magnet Ball Bearing Amps AC– 3.5 115V Watts–250 1/10 Horsepower 5,000 RPM Max. Permanent Magnet Ball Bearing Amps AC– 1.2 115V .6 230V Watts–75 Bench TXR TXM has dial control in base TXR EMX SXR TXMH has dial control in base TXR 93 Inner Shaft EMX SXR EMX SXR 77N Outer Sheath 319P Motor Brushes LXM has dial control in base 10823 Inner Shaft 10801TX Outer Sheath (includes 10819) 10819 Silencer 10816TX Complete Assembly (10823, 10801TX, 10819) 319P Motor Brushes TXR 93 Inner Shaft EMGX–Dial Control FCGX–On/Off Foot Switch 76N Outer Sheath 319P Motor Brushes EMX SXR LXMH has dial control in base TXR-1, SXR-1, EMX-1 N/A Amps– 4 Hz– 60 TXR-1, SXR-1, EMX-1 N/A Amps– 4 Hz– 60 TXR-1, SXR-1, TXR-2, SXR-2 EMX-1 EMX-2 Amps– 4 Hz– 60 Amps– 3 Hz– 50 TXR-1, SXR-1, TXR-2, SXR-2 EMX-1 EMX-2 Amps– 4 Hz– 60 Amps– 3 Hz– 50 EMGX-1 Amps– 1.5 Hz– 60 EMGX-2 Amps– 1.5 Hz– 50 FCGX-1 Amps– 6 Hz– 60 FCGX-2 Amps– 3 Hz– 50 Series SR, SRH, LX, LXH, and PowerGraver Models are available in both 115 and 230 Volt. Series SR CE is only available in 230 Volt. Series TX and TXH are not available in 230 Volt. * Foredom motors are rated under load at continuous duty/maximum efficiency and not maximum power output at stall point.
