Shaper Cutters - Cutting Tools Chicago
Transcription
Shaper Cutters - Cutting Tools Chicago
2007Shaping_215-225.qxd 5/29/07 5:01 PM Page 216 Shaper Cutters STRAIGHT PROFILING Jointing Door Making CARBIDE-TIPPED SHAPER CUTTERS Over 100 different cutters for all your shaping needs. Extra-thick carbide tips offer many resharpenings and longer tool life. RPM rating: 12,000 and under. Cutters are furnished with either 1/2", 3/4" or 1-1/4" bore. Cutters with 3/4" bore include 2 reduction bushings (1/2" x 3/4") which will reduce the bore to 1/2". Cutters with 1-1/4" bore include 2 reduction bushings (1" x 1-1/4") which will reduce the bore to 1". CORNER ROUND CUTTER D d R B R1 D1 ØD 2-5/8 3-5/32 ØD1 1-5/8 2-5/32 B 15/16 15/16 STRAIGHT EDGE CUTTER Tool No. 905 SC680 R 1/4 1/4 R1 1/2 1/2 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005** C011** C051*** D d SHAPER CUTTERS B 216 ØD B Tool No. 1-7/8 1/4 SC672 2 1/4 SC612 2-1/2 1/4 SC674 2-5/8 1/4 * 918 2-3/4 1/4 SC671 2-7/8 1/4 SC611 2-7/8 1/4 SC613 3-1/8 1/4 ** 917 3-3/8 1/4 SC673 3-9/16 1/4 SC615 2-5/8 3/8 * 953 2 1/2 SC614 2-1/2 1/2 948 2-5/8 1/2 954 2-5/8 3/4 912 2 1 SC610 2-5/8 1 955 2-5/8 1-1/2 956 2-5/8 2 SC632 *Due to size, furnished with only one 1/2" x 3/4" bushing. **Cabinet set replacement cutter, no bushing is furnished. Ød 1/2 & 3/4 1/2 1 & 1-1/4 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1 & 1-1/4 1/2 & 3/4 1 & 1-1/4 1 & 1-1/4 1/2 & 3/4 1/2 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1/2 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com NOTE: For heavy duty larger diameter straight edge shaper cutters see page 232. See pages 280 - 282. 2007Shaping_215-225.qxd 5/29/07 5:01 PM Page 217 Shaper Cutters Straight PROFILING Jointing Door Making COVE & CORNER ROUND CUTTER D d R T B B1 T1 R1 950 D1 ØD 2-5/8 2-3/4 3 3-1/4 3-3/4 ØD1 2 1-3/4 1-3/4 1-3/4 1-3/4 B B1 15/16 1/8 1-3/8 3/8 1-9/16 5/16 1-7/8 3/8 2-1/4 1/4 T T1 1/2 5/16 1/2 1/2 5/8 5/8 3/4 3/4 1 1 Tool No. 950 SC410 SC412 SC414 SC416 R 1/2 1/2 5/8 3/4 1 R1 5/16 1/2 5/8 3/4 1 Ød Rub Collar 1/2 & 3/4 C-005** 1/2 & 3/4 C-006** 1/2 & 3/4 C-006** 1/2 & 3/4 C-006** 1/2 & 3/4 C-006** FLUTE & COVE CUTTER D d R B ØD 2 B 1 B1 1/4 Tool No. SC600 R 1/2 Ød 1/2 Rub Collar C-001* R1 5/16 Ød 1/2 & 3/4 Rub Collar C-010** SHAPER CUTTERS B1 5/16" COVE & 3/8" BEAD CUTTER D d R B R1 ØD 2-5/8 B 1 R 3/8 Tool No. 951 Replacement ‘T’ bushing(s) #BU-550. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com See pages 280 - 282. 217 2007Shaping_215-225.qxd 5/29/07 5:01 PM Page 218 Shaper Cutters Straight PROFILING Jointing 1/8" - 3/8" CORNER ROUND & 1/4" BEAD CUTTER D d R B R1 R1 D1 ØD 2 2-5/8 ØD1 1-1/4 1-7/8 B 1 15/16 Tool No. SC602 952 R 3/8 3/8 R1 1/8 1/8 Ød Rub Collar 1/2 C-002* 1/2 & 3/4 C-008** DROP LEAF COVE CUTTER D d R SHAPER CUTTERS B ØD 2-5/8 B 1 R 3/8 Tool No. SC634 Ød 1/2 & 3/4 Rub Collar C-008** 3/4" RADIUS CORNER ROUND CUTTER D d R B D1 Description Corner Round Drop Leaf-Bead ØD 3-5/8 2-5/8 ØD1 2-1/8 1-5/8 Tool No. 959 SC636 B 1 1 R 3/4 1/2 Ød 1/2 & 3/4 1/2 & 3/4 Rub Collar C-011** C-005** Replacement ‘T’ bushing(s) #BU-550. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! 218 Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com See pages 280 - 282. Door Making 2007Shaping_215-225.qxd 5/29/07 5:02 PM Page 219 Shaper Cutters Straight PROFILING Jointing Door Making D1 D d BULL NOSE CUTTER B B1 973 R Description ØD ØD1 B Tool No. 1/4 Bead 2-5/8 2-3/8 9/16 * 973 3/8 Bead 2-5/8 2-1/4 5/8 974 1/2 Bead 2-5/8 2-1/8 13/16 925 5/8 Bead 2-5/8 2 15/16 923 3/4 Bead 2-5/8 1-7/8 1-1/16 927 1 Bead 2-5/8 1-5/8 1-1/2 929 1-1/4 Bead 3-9/16 2-5/16 1-5/8 SC570 1-1/2 Bead 3-13/16 2-5/16 2 SC572 2 Bead 4-5/16 2-5/16 2-1/2 SC574 *Due to size, furnished with only one 1/2" x 3/4" bushing. STAIR TREAD NOSE CUTTER 925 B1 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 R 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 Ød 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1 & 1-1/4 1 & 1-1/4 1 & 1-1/4 Rub Collar C-015** C-025** C-011** C-010** C-008** C-005** C-040*** C-040*** C-040*** 927 929 D1 D d R B B1 ØD1 1-7/8 B 1-1/2 FLUTE (CONVEX) CUTTER Tool No. 932 B1 1-1/8 R 9/16 Ød 1/2 & 3/4 SHAPER CUTTERS ØD 3-3/8 974 NOTE: For heavy duty larger diameter bull nose shaper cutters see page 233. Rub Collar C-008** D d 972 B 928 NOTE: For heavy duty larger diameter flute (convex) shaper cutters see page 232. R Description ØD B Tool No. 1/4 Flute 2-5/8 1/4 * 971 3/8 Flute 2-5/8 3/8 * 972 1/2 Flute 2-5/8 1/2 926 3/4 Flute 2-5/8 3/4 928 1 Flute 2-5/8 1 930 1-1/4 Flute 3-1/4 1-1/4 SC532 1-1/2 Flute 3-1/2 1-1/2 SC534 2 Flute 4 2 SC536 *Due to size, furnished with only one 1/2" x 3/4" bushing. 926 R 1/8 3/16 1/4 3/8 1/2 5/8 3/4 1 Ød 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1/2 & 3/4 1 & 1-1/4 1 & 1-1/4 1 & 1-1/4 Rub Collar C-015** C-025** C-011** C-008** C-005** C-050*** C-050*** C-050*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 930 See pages 280 - 282. 219 2007Shaping_215-225.qxd 5/29/07 5:02 PM Page 220 Shaper Cutters Straight PROFILING JOINTING CORNER TRIPLE BEAD CUTTER D d C B R D1 ØD 2-5/8 ØD1 1-1/2 B 7/8 Tool No. SC624 C 9/16 R 3/16 Ød 1/2 & 3/4 Rub Collar C-043** C 5/8 R 1/4 Ød 1/2 & 3/4 Rub Collar C-006** C 3/4 R 1/2 Ød 1/2 & 3/4 Rub Collar C-008** MATCHED / REVERSIBLE DETAIL BEAD & COVE CUTTER D C d B R SHAPER CUTTERS D1 ØD 3 ØD1 1-3/4 B 15/16 Tool No. SC646 MATCHED / REVERSIBLE CORNER BEAD CUTTER D d C B R D1 ØD 3-3/8 ØD1 1-7/8 B 15/16 Tool No. SC648 See pages 280 - 282. 220 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com Door Making 2007Shaping_215-225.qxd 5/29/07 5:02 PM Page 221 Shaper Cutters Straight PROFILING JOINTING Door Making MATCHED / REVERSIBLE OGEE CUTTER D d B B1 R R ØD 2-5/8 3-1/8 B 3/4 3/4 B1 1/2 1/2 Tool No. 906 SC682 R 1/4 1/4 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005** C-051*** WAVE EDGE CUTTER D C B d R R1 R2 D1 ØD1 1-5/8 B 1 C 9/16 Tool No. SC626 R 3/16 R1 1/4 R2 1/8 Ød Rub Collar 1/2 & 3/4 C-005** SHAPER CUTTERS ØD 2-3/4 ROUNDED FLUTE CUTTER D d R B R1 R D1 ØD 2-5/8 ØD1 2-5/16 B 1 Tool No. SC628 R 3/32 R1 7/32 Ød 1/2 & 3/4 Rub Collar C-013** See pages 280 - 282. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 221 2007Shaping_215-225.qxd 5/29/07 5:02 PM Page 222 Shaper Cutters OGEE & BEAD CUTTER PROFILING Jointing Door Making D d R B Straight R1 B1 D1 Description ØD ØD1 Ogee & Bead Table Edge 3-1/4 2-1/8 B 1 Tool No. 958 B1 3/4 R 1/8 R1 1/2 Ød Rub Collar 1/2 & 3/4 C-007** CROWN MOLDING CUTTER D d a° R1 a° SC666 B B1 962 SC664 SC662 SC660 R SHAPER CUTTERS a° ØD 2-3/4 3-1/2 3-1/2 3-1/2 3-1/2 B 2-1/4 2 2-1/2 3 3-1/2 B1 2 1-3/4 2-1/4 2-3/4 3-1/4 a° 45° 45° 45° 45° 45° MULTI-FORM CUTTER R 1/2 11/32 13/32 17/32 9/16 Tool No. 962 SC666 SC664 SC662 SC660 Ød 1/2 & 3/4 1 1 & 1-1/4 1 & 1-1/4 1 & 1-1/4 R1 3/16 1/4 11/32 11/32 1/2 Rub Collar C-027** C-049*** C-048*** C-047*** C-046*** D d R2 R1 B R1 R D1 ØD 3-1/2 ØD1 2-7/8 B 1-7/8 R 1/4 Tool No. 965 R1 5/16 R2 3/8 Ød 1/2 & 3/4 Rub Collar C-007** See pages 280 - 282. 222 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 2007Shaping_215-225.qxd 5/29/07 5:02 PM Page 223 Shaper Cutters Straight PROFILING Jointing Door Making MOLDING CUTTER D R2 d R1 B R1 R ØD 3 B 1-3/4 R 1/8 Tool No. 966 R1 5/32 R2 1/4 Ød 1/2 & 3/4 Rub Collar C-010** R 1/4 R1 3/16 Ød 1/2 & 3/4 Rub Collar C-006** MOLDING CUTTER C D d R1 B R D1 ØD1 1-3/4 B 15/16 C 7/16 Tool No. SC630 SHAPER CUTTERS ØD 2-5/8 CROWN MOLDING CUTTER D d R B a° ØD 3-1/4 B 2-1/4 a° 45° Tool No. 967 R 1-1/4 Ød 1/2 & 3/4 Rub Collar C-030** Replacement ‘T’ bushing(s) #BU-550. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com See pages 280 - 282. 223 2007Shaping_215-225.qxd 5/29/07 5:02 PM Page 224 Shaper Cutters Straight PROFILING JOINTING Door Making WINDOW SASH CUTTER WITH BALL BEARING RUB COLLAR D For this profile use bottom cutter and rub collar only. d B3 B B1 R B2 B1 ØD 2 B 1-5/8 B1 5/16 Tool No. 939 B2 3/8 B3 5/8 R Ød Rub Collar 1/4 1/2 & 3/4 C-043** JOINERY CUTTERS D d WEDGE TONGUE & GROOVE SHAPER CUTTERS B B1 C SC606 D1 ØD 2 2-5/8 ØD1 1-3/8 2 B 1 15/16 Tool No. SC606 903 B1 1/4 11/32 C 5/16 – Ød 1/2 1/2 & 3/4 C 5/16 – Ød 1/2 1/2 & 3/4 Rub Collar C-002* C-010** D d B B1 C D1 ØD 2 2-5/8 ØD1 1-3/8 2 B 1 15/16 Tool No. SC604 904 B1 1/4 11/32 Rub Collar C-002* C-010** Replacement ‘T’ bushing(s) #BU-550. 224 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com SC604 See pages 280 - 282. 2007Shaping_215-225.qxd 5/29/07 5:02 PM Page 225 Shaper Cutters Straight PROFILING JOINTING Door Making D1 D d GLUE JOINT B B1 SC616 ØD 2-5/8 2-5/8 2-13/16 ØD1 2-5/16 2-1/4 2-1/2 B 3/4 1-3/16 1-3/16 Tool No. SC616 911 SC617 B1 – 3/8 3/8 Ød 1/2 & 3/4 1/2 & 3/4 1 & 1-1/4 Rub Collar C-014** C-026** C-017** D d SASH B R Tool #975 D1 D d 975 R 976 B SHAPER CUTTERS Tool #976 Description Female Sash Male Sash ØD 2-5/8 2-5/8 ØD1 2-1/8 2-1/8 B 5/8 5/8 Tool No. 975 976 LOCK MITER B R 1/8 1/8 Ød 1/2 & 3/4 1/2 & 3/4 Rub Collar C-024** C-024** D1 D d B1 a° ØD 3-3/4 4-17/32 ØD1 2 2-31/64 B 1 1 Tool No. 998 SC619 B1 3/8 3/8 a° 45° 45° Ød Rub Collar 1/2 & 3/4 C-006** 1 & 1-1/4 C-017*** Replacement ‘T’ bushing(s) #BU-550. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com See pages 280 - 282. 225 2007Shaping_226-235.qxd 5/29/07 5:19 PM Page 226 Shaper Cutters Straight PROFILING JOINTING D d FINGER JOINT B L B1 D1 Description Finger Joint ØD ØD1 2-7/8 2-1/8 B 1-1/2 Tool No. 999 B1 13/64 L 3/8 Ød 1/2 & 3/4 Rub Collar C-011** D d REVERSIBLE GLUE JOINT B B1 D1 Description Reversible Glue Joint ØD 2-5/8 DOOR LIP a° ØD1 2-3/8 Tool No. 933 B 3/4 B1 11/32 Ød 1/2 & 3/4 Rub Collar C-014** D d SHAPER CUTTERS B1 B R D1 Description ØD ØD1 B Corner Round & Rabbet 2-5/8 1-3/4 1-3/16 (counter-clockwise, rabbet up) Tool No. 900 B1 5/8 R 3/8 a° Ød Rub Collar 10° 1/2 & 3/4 C-006** B1 11/16 R 3/8 a° Ød Rub Collar 10° 1/2 & 3/4 C-006** D d DOOR LIP R B B1 a° D1 Description ØD ØD1 B Corner Round & Taper 2-5/8 1-3/4 1-1/4 Rabbet (counter-clockwise, rabbet down) 226 Tool No. 901 Replacement ‘T’ bushing(s) #BU-550. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com See pages 280 - 282. Door Making 2007Shaping_226-235.qxd 5/29/07 5:20 PM Page 227 Shaper Cutters Straight PROFILING Jointing Door Making DOOR LIP D d R B B1 a° D1 Description ØD ØD1 B Corner Round & Taper 2-5/8 2 1 Rabbet (counter-clockwise, rabbet down) Tool No. 991 B1 R 7/16 1/8 a° 10° Ød Rub Collar 1/2 & 3/4 C-006** D d DOOR LIP B B1 D1 ØD 2-5/8 ØD1 2-1/4 Tool No. 992 B 1 B1 13/16 Ød 1/2 & 3/4 SHAPER CUTTERS Description Corner Round & Ogee Rub Collar C-023** D d DOOR LIP B D1 Description Ogee & Cove ØD 2-5/8 ØD1 1-1/2 Tool No. 993 B 1 Ød 1/2 & 3/4 Rub Collar 47806** See pages 280 - 282. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 227 2007Shaping_226-235.qxd 5/29/07 5:20 PM Page 228 Shaper Cutters Straight PROFILING Jointing DOOR LIP D d B R B1 R1 C D1 Description ØD ØD1 B B1 Replacement ‘T’ bushing(s) #BU-550. Ogee & Cove 4-5/16 3-1/8 1-1/32 9/32 Tool No. SC462 C 3/8 R 1/4 R1 1/8 Ød Rub Collar 1 & 1-1/4 C-049*** DOOR LIP D d B R B1 R C SHAPER CUTTERS D1 Description ØD ØD1 B B1 Replacement ‘T’ bushing(s) #BU-550. Ogee & Cove 4-5/16 3-1/8 1-1/32 3/8 Tool No. SC464 C 13/32 R 1/8 Ød 1 & 1-1/4 Rub Collar C-048*** 90° ‘V’ GROOVE D d a° B Description 90° ‘V’ Groove 228 ØD 2-5/8 B 15/16 Tool No. 957 a° 45° Ød 1/2 & 3/4 Rub Collar 47810** Replacement ‘T’ bushing(s) #BU-550. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com See pages 280 - 282. Door Making Shaper Cutters Straight PROFILING Jointing Door Making D d BEVEL a° B C D1 Description ØD ØD1 B 90° Double Bevel 2-5/8 1-11/16 1-3/16 Tool No. SC638 a° 45° C 1/2 Ød 1/2 & 3/4 Rub Collar C-005** D d BEVEL a° B 977 D1 ØD 2-5/8 3-1/2 4 ØD1 1-3/8 1-1/2 2 B 1 1 1 Tool No. 977 SC618 SC621 a° 30° 45° 45° Ød 1/2 & 3/4 1/2 & 3/4 1 & 1-1/4 Rub Collar C-044** C-011** C-050*** SC618 SC621 D d CLASSICAL B B1 SHAPER CUTTERS Description 30° Bevel 45° Bevel 45° Bevel R D1 ØD 2-5/8 ØD1 2 B 1 Tool No. 964 B1 3/8 R 3/16 Ød 1/2 & 3/4 Rub Collar C-004** See pages 280 - 282. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 229 2007Shaping_226-235.qxd 5/29/07 5:20 PM Page 230 Shaper Cutters REVERSIBLE / MATCHED COVE & BEAD Straight PROFILING JOINTING D d B B1 R R D1 ØD 3 ØD1 1-3/4 B 3/4 B1 1/2 Tool No. 968 REVERSIBLE / MATCHED OGEE R 15/64 Ød 1/2 & 3/4 Rub Collar C-006** Ød 1/2 & 3/4 Rub Collar C-006** D d B B1 SHAPER CUTTERS R D1 ØD 3-1/4 ØD1 1-3/4 B 7/8 B1 3/8 Tool No. 969 R 1/2 D d DOUBLE FLUTE COVE B R D1 ØD 2-5/8 ØD1 2-3/8 B 7/8 Tool No. SC620 R 1/8 Ød 1/2 & 3/4 Rub Collar C-015** Replacement ‘T’ bushing(s) #BU-550. See pages 280 - 282. 230 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com Door Making 2007Shaping_226-235.qxd 5/29/07 5:20 PM Page 231 Shaper Cutters Straight PROFILING Jointing Door Making DOUBLE FLUTE BEAD D d B R D1 ØD 2-5/8 ØD1 2-3/8 B 1 Tool No. SC622 R 1/8 Ød 1/2 & 3/4 Rub Collar C-015** 3 WING TRIPLE BEAD CUTTER D d B B1 R B 1 B1 5/8 Tool No. 960 R 5/64 Ød 1/2 & 3/4 Rub Collar C-015**, C-028** R 5/64 Ød 1/2 & 3/4 Rub Collar C-015**, C-028** SHAPER CUTTERS ØD 2-5/8 TRIPLE FLUTING CUTTER D d B ØD 2-5/8 B 1 B1 R B1 5/8 Tool No. 961 See pages 280 - 282. Replacement ‘T’ bushing(s) #BU-550. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 231 2007Shaping_226-235.qxd 5/29/07 5:21 PM Page 232 Shaper Cutters STRAIGHT PROFILING Jointing HEAVY-DUTY CARBIDE-TIPPED SHAPER CUTTERS 3 WING d STRAIGHT EDGE B D SHAPER CUTTERS ØD 4 4 4 4 4 4 4 4 4 B 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 Tool No. A-27-100 A-27-102 A-27-104 A-27-106 A-27-108 A-27-110 A-27-112 A-27-114 A-27-116 Ød 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 NOTE: For additional sizes please see page 216 D HEAVY DUTY FLUTE (CONVEX) d R B ØD 4 4 4 4 4 A-28-108 R 1/8 3/16 1/4 3/8 1/2 Tool No. A-28-100 A-28-102 A-28-104 A-28-106 A-28-108 A-28-106 B 1/4 3/8 1/2 3/4 1 A-28-104 Ød 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 Rub Collar C-038 C-037 C-035 C-033 C-032 A-28-102 NOTE: For additional sizes please see page 219 A-28-100 See pages 280 - 282. 232 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com Door Making 2007Shaping_226-235.qxd 5/29/07 5:21 PM Page 233 Shaper Cutters Straight PROFILING Jointing Door Making CORNER ROUND A-30-120 D1 d R A-30-118 B A-30-114 D A-30-112 Counter-clockwise rotation: Wood face-down ØD 4 4 4 4 4 4 4 4 4-1/2 4-1/2 5-1/2 ØD1 3-3/4 3-5/8 3-1/2 3-3/8 3-1/4 3 2-3/4 2-1/2 2-1/2 2-1/2 2-1/2 R 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 Tool No. A-30-100 A-30-102 A-30-104 A-30-106 A-30-108 A-30-110 A-30-112 A-30-114 A-30-116 A-30-118 A-30-120 B 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/4 1-1/2 1-3/4 Ød 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 Rub Collar C-038 C-037 C-035 C-034 C-033 C-032 C-031 C-017 C-017 C-017 C-017 A-30-110 A-30-108 A-30-106 A-30-104 A-30-102 A-30-100 HEAVY DUTY BEAD (BULL NOSE) D1 d SHAPER CUTTERS B1 B R D ØD 4 4 4 4 4 A-29-100 ØD1 3-3/4 3-5/8 3-1/2 3-1/4 3 R 1/8 3/16 1/4 3/8 1/2 A-29-102 B 1/2 5/8 13/16 1-1/8 1-5/16 Tool No. A-29-100 A-29-102 A-29-104 A-29-106 A-29-108 A-29-104 B1 1/4 3/8 1/2 3/4 1 Ød 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 Rub Collar C-038 C-037 C-035 C-033 C-032 NOTE: For additional sizes please see page 219 A-29-108 See pages 280 - 282. *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 233 2007Shaping_226-235.qxd 8/10/07 11:08 AM Page 234 Shaper Cutters Straight Profiling JOINTING FOR 3/4" MATERIAL WAINSCOT / PANELING CUTTERS BY Wainscot and paneling are a great way to add visual interest to walls. Paneling is used to cover an entire wall while wainscot stops at the chair rail. Amana Tool® offers three styles of profiles to choose from. The first, wainscot with a vee, provides a simple forty-five degree vee profile along the edges of the stock. The other two sets create a 5/16" diameter bead along the edges of the stock. All three sets are designed for 3/4" thick stock and create an interlocking 1/4" tongue-and-groove joint for ease of assembly. WAINSCOT with ‘V’ CUTTERS L d a° T1 T B T1 L D1 D D1 D 1 2 SC420 ØD 3-1/2 ØD1 3 B 1 a° 45° Tool No. SC420 (SET) T 1/4 T1 3/8 L 1/4 Ød 1/2 & 3/4 Rub Collar C-017** 90° 45° 3/8" 3/4" 1/4" 3/8" 1/4" WAINSCOT with BEAD CUTTERS L1 d SHAPER CUTTERS L T1 T B T1 D1 D d D2 D 1 B R 2 3 SC424 SC430 D1 D ØD 3 3 ØD1 2-1/2 2-11/16 7/16" 5/16" ØD2 2-5/8 — B 1 7/16 Tool No. SC430 (SET) SC424 3/16" 1/16" 1/4" T 1/4 1/16 T1 3/8 5/16 R — 5/32 L 1/4 — L1 3/16 — Ød Rub Collar 1/2 & 3/4 47822** 1/2 & 3/4 C-019** R 5/32" 3/8" 3/4" 1/4" 3/8" 1/16" See pages 280 - 282. 234 Door Making *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com Shaper Cutters Straight Profiling JOINTING Door Making FOR 3/4" MATERIAL WAINSCOT / PANELING CUTTERS BY WAINSCOT with ‘V’ & BEAD CUTTERS L L d d C T1 B T B T1 D1 D D1 D d R 1 2 3 SC432 SC422 SC426 T1 T L a° D1 D ØD 3 3 2-13/16 ØD1 2-5/8 2-1/2 2-3/8 5/16" B 1 1 25/32 a° — 45˚ 45˚ Tool No. SC432 SC422 SC426 3/16" 45° T 1/4 3/8 5/16 1/4" T1 3/8 1/4 1/4 R — — 5/32 L 3/16 1/4 7/32 Ød Rub Collar 1/2 & 3/4 47822** 1/2 & 3/4 C-017** 1/2 & 3/4 C-017** 7/32" 45° 3/8" R 5/32" 3/4" 1/4" 3/8" 1/16" ØD 4-9/64 ØD1 2-23/64 B 3-5/16 R 29/64 Tool No. SC668 R1 3/16 R2 7/32 L 7/8 Ød 1 & 1-1/4 Rub Collar C-040*** 57/64" d SHAPER CUTTERS BASE MOLDING 3 WING R B R1 3-1/4" R2 L D D1 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com See pages 280 - 282. 235 2007Shaping_236-252.qxd 7/12/07 12:43 PM Page 236 Shaper Cutters Straight Profiling Jointing DOOR MAKING 3 WING STILE & RAIL CABINET DOOR CUTTER SETS FOR 3/4" MATERIAL These Stile & Rail sets are great for making cabinet doors. CONCAVE d C L T B R R D D ØD 2-7/16 3-9/16 C 1/4 1/4 B 1 1 T 1/4 1/4 L 7/16 7/16 Tool No. SC440 SC540 R 1/4 1/4 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-009** C-019, C-021*** 3 WING STILE & RAIL EASED EDGE SET d d L R R T B D D1 ØD 3 ØD1 2-9/32 Eased edge corners D D1 B 3/4 T 1/4 L 11/32 Tool No. SC441 R 1/4 Ød 1/2 & 3/4 Rub Collar C-014** SHAPER CUTTERS CONCAVE C d L T R B R D D ØD 3-9/16 C 1/4 B 1 T 1/4 L 7/16 Tool No. SC550 R 13/64 Ød 1 & 1-1/4 Rub Collar C-019, C-021*** OGEE d d L B T R D D ØD 2-11/16 3-9/16 236 B 1 1-1/16 T 1/4 1/4 L 7/16 7/16 Tool No. SC444 SC544 R 1/8 1/8 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-007, C-012*** C-019, C-021*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com SC444 2007Shaping_236-252.qxd 5/30/07 1:18 PM Page 237 Shaper Cutters Straight Profiling Jointing DOOR MAKING STILE & RAIL CABINET DOOR CUTTER SETS FOR 3/4" MATERIAL BEAD d C L T B R D D ØD 2-11/16 3-9/16 C 3/8 3/8 B 1 1 T 1/4 1/4 L 7/16 7/16 Tool No. SC446 SC546 R 9/32 9/32 Ød 1/2 & 3/4 1 & 1-1/4 OGEE Rub Collar C-007, C-010*** C-019, C-020*** d C L T R B R R1 D ØD 2-11/16 3-9/16 C 3/8 3/8 D B 1 15/16 T 1/4 1/4 L 7/16 7/16 Tool No. SC442 SC542 R 5/16 1/4 R1 3/16 3/16 Ød Rub Collar 1/2 & 3/4 C-007, C-010*** 1 & 1-1/4 C-019, C-020*** GLASS DOOR & MULLION FOR SC442 AND SC446 SC442 (TOP) SC445 (BOTTOM) SC446 (TOP) SC445 (BOTTOM) d SC446 shown B B D ØD 2-7/8 D1 ØD1 1-13/16 Tool No. SC445 B 1/2 SHAPER CUTTERS Used in conjuction with cutter SC442 and SC446 to make rabbets for the back of doors for glass door panels or mullions. Glass must be secured later on in place with moulding. Ød 3/4 OGEE d C L T B R R D ØD 3-9/16 C 3/8 B 1 D T 1/4 L 7/16 Tool No. SC548 R 9/64 Ød 1 & 1-1/4 Rub Collar C-019, C-020*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 237 Shaper Cutters Straight Profiling Jointing DOOR MAKING 5/8" - 2-1/8" MATERIAL TONGUE & GROOVE CABINET DOOR CUTTER SET MISSION STYLE - SHAKER AND ARTS & CRAFTS d L L L C C T B T C C D1 D ØD 2-3/4 3-3/8 2-3/4 3-1/4 3-1/2 ØD1 1-7/8 2-1/2 1-7/8 2-3/8 2-1/2 B 1 1-1/8 1-3/4 1-3/4 2-1/8 C 3/8 7/16 11/16 11/16 13/16 D1 D T 1/4 1/4 3/8 3/8 1/2 L 7/16 7/16 7/16 7/16 1/2 Tool No. SC554 SC556 SC558 SC557 SC559 Ød 1/2 & 3/4 1 & 1-1/4 1/2 & 3/4 1 & 1-1/4 1 & 1-1/4 Rub Collar C-008** C-017*** C-008** C-041*** C-017*** ADJUSTABLE TONGUE & GROOVE CABINET DOOR CUTTER SET For Material 5/8 - 1 5/8 - 1-1/8 3/4 - 1-3/4 3/4 - 1-3/4 1 - 2-1/8 SC554 5/8" - 1-1/4" MATERIAL SHAKER AND ARTS & CRAFTS SHAPER CUTTERS ● ● ● FLAT PANEL CABINET DOOR MAKING SET Designed to cut precise grooves to provide undersized plywood veneered panels with a snug rattle free fit. Adjust the panel groove width 3/16" to 9/32" for 1/4" plywood. 5.5mm for undersized 1/4" plywood and 5.9mm for oversized 1/4" veneered plywood. d L L C C B T T C C D1 D1 D D ØD ØD1 B 2-3/8 1-5/8 1 - 1-5/16 2-59/64 2-5/32 1-1/16 - 1-21/64 C 7/16 7/16 Tool No. SC555 SC553 T L 3/16 to 9/32 3/8 3/16 to 9/32 3/8 Ød Rub Collar 1/2 & 3/4 C-005** 1 & 1-1/4 C-051*** 3/16" 9/32" MIN. MAX. 238 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 1-1/4" 2007Shaping_236-252.qxd 5/30/07 1:23 PM Page 239 Shaper Cutters Straight Profiling JOINTING Door Making 5/8"- 3/4" MATERIAL FLOORING SET WITH NAIL SLOT FOR D d C D C R1 T B R D1 ØD 3-1/4 ØD1 2-5/16 D1 B 7/8 T 1/4 Tool No. SC450 R 1/8 R1 1/16 Ød Rub Collar 1/2 & 3/4 C-029, C-014 ‘V’ PANELING 2 PIECE CUTTER SETS ‘V’ PANELING 2 PIECE SET WITH 1/4"W X 3/8"D TONGUE & GROOVE D D d a˚ B ØD 2-5/8 ØD1 2-1/4 SHAPER CUTTERS D2 D1 D1 ØD2 1-1/2 Tool No. 938 B 29/32 a° 45° Ød Rub Collar 1/2 & 3/4 C-008** 1/2 ‘V’ PANELING CUTTER SET D d C B D C a˚ D1 ØD 2-5/8 2-3/4 2-3/4 ØD1 1-1/8 2 2 B C 3/4 7/16 1 5/8 1-3/16 5/8 D1 a° 45° 45° 45° Tool No. SC640 SC642 SC644 Ød Rub Collar For Material 1/2 & 3/4 C-006, C-011** 1/2 1/2 & 3/4 C-010, C-043* 3/4 1/2 & 3/4 C-010** 1 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com SC640 239 2007Shaping_236-252.qxd 5/30/07 1:24 PM Page 240 Shaper Cutters Straight STILE & RAIL CABINET DOOR CUTTER SETS FOR CABINET MOLDING SET WITH 1/4"W X 3/8"D TONGUE & GROOVE d 913 R1 R 918 R R1 909 919 B B1 914 D1 D D1 D SHAPER CUTTERS ØD 2-5/8 ØD1 1-7/8 Includes: 909 910 913 914 918 919 BU-550 BU-900 BU-930 B 1-13/16 B1 1 Tool No. 921 R 1/8 R1 5/32 Ød Rub Collar 1/2 & 3/4 C-008** Cabinet R.H. female Cabinet L.H. female Cabinet L.H. male Cabinet R.H. male 1/4" Straight Steel spacer ‘T’ bushing, 1/2" x 3/4" (4 pcs.) Sleeve bushing, 1/2" x 3/4" x 1/2" long Sleeve bushing, 1/2" x 3/4" x 1-1/8" long CONCAVE d C L R T B R D ØD 2-7/8 3-9/16 240 C 1/4 1/4 B 1-3/16 1-3/16 D T 1/4 1/4 Tool No. SC460 SC560 L 7/16 7/16 Jointing DOOR MAKING 1"-1-3/4" MATERIAL 3/4" BORE WITH 1/2" BUSHINGS 3-WING 910 Profiling R 15/64 15/64 Ød Rub Collar 1/2 & 3/4 C-009*** 1 & 1-1/4 C-019*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 2007Shaping_236-252.qxd 5/30/07 1:24 PM Page 241 Shaper Cutters Straight Profiling Jointing DOOR MAKING 1" MATERIAL STILE & RAIL CABINET DOOR CUTTER SETS FOR BEAD C L d T B R D ØD 3-9/16 D C 3/8 B 1-3/8 T 1/4 Tool No. SC562 L 7/16 R 9/32 Ød 1 & 1-1/4 Rub Collar C-019*** OGEE C d L T B R D D ØD 3-9/16 C 3/8 B 1-3/16 T 1/4 Tool No. SC564 L 7/16 R 5/32 Ød 1 & 1-1/4 Rub Collar C-019*** OGEE STILE & RAIL SET WITH 1/4"W X 5/16"D TONGUE & GROOVE D2 d D R 996 995 R1 919 917 B 948 948 D1 ØD 3-1/8 Includes: 948 917 919 995 996 BU-550 BU-910 D1 1-7/8 SHAPER CUTTERS STILE & RAIL CABINET DOOR CUTTER SETS FOR 1-5/16" MATERIAL D2 D2 2-1/2 B 1-5/16 Tool No. 994 R 3/16 R1 5/32 Ød Rub Collar 1/2 & 3/4 C-008, C-016** 1/2" straight (2 pcs.) 1/4" straight Steel spacer Ogee stile Rail for ogee stile ‘T’ bushing, 1/2" x 3/4" (4 pcs.) Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.) *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 241 2007Shaping_236-252.qxd 5/30/07 1:24 PM Page 242 Shaper Cutters Straight Profiling Jointing DOOR MAKING STILE & RAIL CABINET DOOR CUTTER SETS FOR 1-5/16" MATERIAL CONCAVE STILE & RAIL SET WITH 1/4"W X 5/16"D TONGUE & GROOVE d R 941 942 919 917 B 948 948 D D1 D2 D ØD 2-1/2 Includes: 941 942 948 917 D1 1-7/8 D2 3-1/8 B 1-17/64 Concave stile Rail for concave stile 1/2" straight (2 pcs.) 1/4" straight Tool No. 940 919 BU-550 BU-910 R 5/16 Ød Rub Collar 1/2 & 3/4 C-008**, C-016** Steel spacer ‘T’ bushing, 1/2" x 3/4" (4 pcs.) Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.) STILE & RAIL CABINET DOOR CUTTER SETS FOR 1-3/8" MATERIAL OGEE L d R SHAPER CUTTERS T B D D ØD 3-9/16 B 1-1/2 T 1/4 BEAD L 9/16 Tool No. SC580 L R 3/16 Ød 1 & 1-1/4 Rub Collar C-017*** d R C C1 T B C D D D1 ØD D1 B L C C1 2-27/32 1-27/32 1-9/16 1/2 17/32 1/8 3-9/16 2-9/16 1-9/16 1/2 17/32 1/8 242 Tool No. SC582 SC583 R 5/16 5/16 Ød 1/2 & 3/4 1 & 1-1/4 T 7/32 7/32 Rub Collar C-007** C-018*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 2007Shaping_236-252.qxd 5/30/07 1:30 PM Page 243 Shaper Cutters Straight Profiling Jointing DOOR MAKING STILE & RAIL CABINET DOOR CUTTER SETS FOR 1-3/8" MATERIAL BEAD & COVE C L d R T B D D1 ØD 3-1/16 3-9/16 ØD1 C 2-1/32 33/64 – 7/8 B 1-9/16 1-5/8 T 1/4 1/4 Tool No. SC585 SC584 L 9/16 9/16 R 3/16 13/64 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collars C-039** C-018*** SC584 CONVEX STILE & RAIL SET WITH 1/4"W X 5/16"D TONGUE & GROOVE 3-WING d R 947 917 B 948 948 D2 D D1 D2 ØD 3-1/8 Includes: 946 947 948 917 919 BU-550 BU-910 ØD1 1-7/8 ØD2 2-1/2 B 1-23/64 Tool No. 945 R 5/16 SHAPER CUTTERS 919 946 Ød Rub Collars 1/2 & 3/4 C-008, C-016** Convex stile Rail for convex stile 1/2" straight (2 pcs.) 1/4" straight Steel spacer ‘T’ bushing, 1/2" x 3/4" (4 pcs.) Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.) *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 243 2007Shaping_236-252.qxd 5/30/07 1:30 PM Page 244 Shaper Cutters Straight STILE & RAIL EXTERIOR DOOR CUTTER SETS FOR Profiling Jointing DOOR MAKING 1-3/4" MATERIAL BEAD & COVE C L T d B R D ØD 2-7/8 C 1/2 B 1-3/4 D T 1/4 L 1/2 Tool No. SC590 R 21/64 Ød 1/2 & 3/4 Rub Collar C-008** STILE & RAIL EXTERIOR DOOR CUTTER SETS FOR 1-3/4" - 2-1/8" MATERIAL BEAD SHAPER CUTTERS C L T B R D1 D D1 D ØD ØD1 C B T L 2-7/8 13/16 17/32 2 1/4 9/16 3-11/32 2-5/16 33/64 1-31/32 1/4 9/16 3-17/32 2-17/32 1/2 2-1/8 1/2 1/2 SC592 244 d Tool No. SC592 SC593 SC596 R 25/64 25/64 25/64 Ød 1/2 & 3/4 1 & 1-1/4 1 & 1-1/4 Rub Collar C-007** C-040*** C-018*** SC593 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com SC596 2007Shaping_236-252.qxd 5/30/07 1:30 PM Page 245 Shaper Cutters Straight Profiling Jointing DOOR MAKING STILE & RAIL EXTERIOR DOOR CUTTER SETS FOR 1-3/4" MATERIAL COVE & BEAD SET WITH 1/4"W X 17/32"D TONGUE & GROOVE d 916 907 R1 R 917 R 908 919 B 915 R1 D1 D2 D3 D ØD ØD1 ØD2 ØD3 B Tool No. 3-1/8 1-7/8 2-5/16 2-1/16 1-3/4 922* 3-5/8 2-3/8 3-7/16 3-9/16 1-3/4 924 * For replacement cutters see references in above photo. R R1 Ød Rub Collars 15/64 11/32 1/2 & 3/4 C-008, C-022** 11/32 1-5/64 1 & 1-1/4 C-042*** STILE & RAIL EXTERIOR DOOR CUTTER SETS FOR 2" MATERIAL OGEE L d T B R ØD 3-9/16 B 2-1/16 T 1/4 L 9/16 Tool No. SC594 R 1/4 Ød 1 & 1-1/4 Rub Collars C-018*** STILE & RAIL EXTERIOR DOOR CUTTER SETS FOR 2-1/8" MATERIAL BEAD C L SHAPER CUTTERS D D d T B R D1 D1 D D ØD ØD1 3-17/32 2-17/32 C 1/2 B 2-1/8 T 1/2 Tool No. SC596 L 1/2 R 25/64 Ød 1 & 1-1/4 Rub Collar C-018*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 245 Shaper Cutters Straight Jointing 5/8" MATERIAL RAISED PANEL CUTTER FOR C Profiling d COVE R B a° D ØD 4-5/8 5-1/2 B 5/8 5/8 C 1-3/16 1-1/2 R 2-23/64 1-29/32 C Tool No. SC658 SC514 a° 6° 6° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005*** C-017*** SC658 d TRADITIONAL B a° D ØD 4-5/8 5-1/2 B 5/8 5/8 C 1-3/16 1-1/2 C R Tool No. SC652 SC516 a° 15° 12° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005*** C-017*** SC652 d TRADITIONAL B a° SHAPER CUTTERS D ØD 4-5/8 5-1/2 B 5/8 5/8 C 1-3/16 1-1/2 R 5/32 1/8 C Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005*** C-017*** SC650 d R B 5/8 5/8 OGEE D C 1-3/16 1-1/2 C Tool No. SC654 SC520 R 1-1/2 1-9/16 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005*** C-017*** SC520 CLASSICAL d B a° R a° 5° 12° B R ØD 4-5/8 5-1/2 Tool No. SC650 SC518 D ØD 4-5/8 5-1/2 246 B 5/8 5/8 C 1-3/16 1-1/2 R 1/8 5/32 Tool No. SC656 SC522 a° 12° 7° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005*** C-017*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com SC522 DOOR MAKING 2007Shaping_236-252.qxd 5/30/07 1:37 PM Page 247 Shaper Cutters Straight Profiling Jointing DOOR MAKING 5/8" MATERIAL RAISED PANEL CUTTER FOR C d B R D ØD 5 5-1/2 B 5/8 5/8 C 1-1/2 1-1/2 Tool No. SC690 SC524 R 1/8 1/8 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-010** C-017*** R 9/64 Ød 1 & 1-1/4 Rub Collar C-017*** d C B R D ØD 5-1/2 B 5/8 C 1-1/2 C Tool No. SC526 d a° B D ØD 5 5-1/2 B 5/8 5/8 C 1-1/2 1-1/2 C R ØD 5-1/2 Tool No. SC694 SC528 R 5/32 5/32 a° 4° 4° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-010** C-017*** R1 1-15/16 a° 28° Ød 1 & 1-1/4 Rub Collar C-017*** SHAPER CUTTERS R d a° R1 B 5/8 B D C 1-1/2 R 1-5/16 Tool No. SC530 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 247 Shaper Cutters Straight Profiling Jointing 5/8" MATERIAL RAISED PANEL CUTTER FOR HORIZONTAL PANEL RAISING / SHEAR FACE TRADITIONAL D C B d B1 a° R Counter-clockwise rotation: Wood face-up ØD 5-1/2 B 5/8 B1 3/8 R 5/32 Tool No. 931 C 1-1/2 a° 5° Ød 1 & 1-1/4 Rub Collar C-017*** D d C TRADITIONAL B1 a° ØD 4-5/8 5-1/2 B 5/8 5/8 B1 5/16 5/16 Tool No. SC401 984 C 1-1/2 1-1/2 a° 15° 15° Ød Rub Collar 1/2 & 3/4 C-005** 1 & 1-1/4 C-017*** VERTICAL PANEL RAISING / SHEAR FACE SHAPER CUTTERS D B B1 TRADITIONAL d a° C ØD 3-1/2 B 5/8 B1 5/16 Tool No. 984-VC C 1-5/8 a° 15° Ød 1/2 & 3/4 Rub Collar 47822** D d B B1 R COVE C ØD 3-1/2 B 5/8 B1 1/4 Tool No. 987-VC R 1-9/16 C 1-5/8 Ød 1/2 & 3/4 Rub Collar 47822** NOTE: Reveal (C) shown on all above tools reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame. Replacement ‘T’ bushings #BU-720 (2 required). 248 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com DOOR MAKING 2007Shaping_236-252.qxd 5/30/07 1:44 PM Page 249 Shaper Cutters Straight Profiling Jointing DOOR MAKING 9/16" MATERIAL RAISED PANEL CUTTER FOR VERTICAL PANEL RAISING / SHEAR FACE 3/4" BORE WITH 1/2" BUSHINGS TRADITIONAL D B d R C a° ØD 2-5/8 B 9/16 R 5/32 Tool No. 902 C 1-1/2 a° 5° Ød 1/2 & 3/4 Rub Collar C-010** 19/32" MATERIAL RAISED PANEL CUTTER FOR D B B1 d CLASSICAL R a° C B 19/32 B1 3/16 R 1/8 Tool No. 986-VC C 1-5/8 a° 12° Ød 1/2 & 3/4 Rub Collar C-016** 21/32" MATERIAL RAISED PANEL CUTTER FOR SHAPER CUTTERS ØD 3-1/2 D B B1 OGEE d R C ØD 3-1/2 B 21/32 B1 9/32 Tool No. 985-VC R 3/4 C 1-5/8 Ød Rub Collar 1/2 & 3/4 C-016** NOTE: Reveal (C) shown on all above tools reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame. Replacement ‘T’ bushings #BU-720 (2 required). *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 249 Shaper Cutters Straight Profiling Jointing 11/16" MATERIAL RAISED PANEL CUTTER FOR HORIZONTAL PANEL RAISING / SHEAR FACE D OGEE C d B1 B R ØD 4-5/8 5-1/2 5-1/2 B 11/16 11/16 11/16 B1 9/32 9/32 9/32 R 7/8 3/4 3/4 Tool No. SC403 985 985-LH* C 1-1/2 1-1/2 1-1/2 Ød 1/2 & 3/4 1 & 1-1/4 1 & 1-1/4 Rub Collar C-005** C-017*** C-017*** *Left Hand Rotation. CLASSICAL D C d B1 B a° R ØD 4-5/8 5-1/2 B 11/16 11/16 B1 11/32 11/32 R 1/8 1/8 Tool No. SC405 986 C 1-1/2 1-1/2 a° 12° 12° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005** C-017*** D C COVE d SHAPER CUTTERS B1 B R ØD 4-5/8 5-1/2 B 11/16 11/16 B1 7/32 7/32 R 2-1/2 1-9/16 Tool No. SC407 987 C 1-1/2 1-1/2 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-005** C-017*** RAISED PANEL BACK CUTTER WITH BALL BEARING RUB COLLAR D d R B Description Back cutter Back cutter ØD 3-1/2 3-39/64 B 1/2 1/2 Tool No. 980 989 R 1/4 1/4 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-006** C-045*** NOTE: Reveal (C) shown on all above tools reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame. Replacement ‘T’ bushings #BU-720 (2 required). 250 *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com DOOR MAKING 2007Shaping_236-252.qxd 5/30/07 1:41 PM Page 251 Shaper Cutters Straight Profiling Jointing DOOR MAKING 3/4" MATERIAL RAISED PANEL CUTTER FOR d COVE B R D SC400 ØD 4-15/16 5-1/2 B 11/16 5/8 R 1-57/64 1-57/64 Tool No. SC400 SC500 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-004*** C-017*** OGEE d C B R R1 D SC402 ØD 4-15/16 5-1/2 B 3/4 5/8 C 3/8 5/16 R 1-15/32 1-15/32 Tool No. SC402 SC502 R1 1/8 1/8 Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-004*** C-017*** d TRADITIONAL SHAPER CUTTERS C a° B D ØD 4-15/16 5-1/2 B 5/8 5/8 C 1/4 1/4 SC404 Tool No. SC404 SC504 a° 17° 17° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-004*** C-017*** d R TRADITIONAL B a° D ØD 4-15/16 5-1/2 B 9/16 5/8 R 13/64 13/64 SC406 Tool No. SC406 SC506 a° 13° 13° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-004*** C-017*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com 251 2007Shaping_236-252.qxd 5/30/07 1:49 PM Page 252 Shaper Cutters Straight RAISED PANEL CUTTER FOR Profiling Jointing DOOR MAKING 3/4" MATERIAL OGEE d C R ØD 4-15/16 5-1/2 B 11/16 5/8 B a° R1 D C 3/8 5/16 R 1-31/32 1-31/32 SC508 Tool No. SC408 SC508 R1 1-3/8 1-31/32 a° 23° 23° Ød 1/2 & 3/4 1 & 1-1/4 Rub Collar C-004*** C-017*** d C B R R1 ØD 5-1/2 B 5/8 D C 3/8 R 13/64 Tool No. SC510 R1 1/8 Ød 1 & 1-1/4 Rub Collar C-017*** CLASSICAL d C SHAPER CUTTERS R B a° D ØD 5-1/2 B 5/8 C 1/4 R 13/64 Tool No. SC512 a° 10° Ød 1 & 1-1/4 Rub Collar C-017*** d COVE & CORNER ROUND C B R R1 D ØD 5-1/2 B 5/8 C 1/4 R 1/8 Tool No. SC509 R1 5/32 Ød 1 & 1-1/4 Rub Collar C-017*** COVE & CORNER ROUND d C a° R B D ØD 5-1/2 252 B 5/8 C 1/4 R 1/8 Tool No. SC511 a° 4° Ød 1 & 1-1/4 Rub Collar C-017*** *Rub collar for 1/2" arbor only! **Rub collar for 3/4" arbor only! ***Rub collar for 1-1/4" arbor only! Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size. For additional 1:1 profiles and a complete replacement part listing visit www.amanatool.com
Similar documents
Order online! - Star Cutouts
for example PBA. This means the product falls into Price Band A. The table below gives the prices for each band.
More informationKirwin WRAPS 9 Element Watershed Plan w
List of Figures Figure 1: Location of Solomon River Basin within the River Basins of Kansas Figure 2: Location of the Kirwin Lake watershed in relation to the Waconda Lake watershed, Smoky Solomon...
More information