construction equipment
Transcription
construction equipment
construction equipment ”we have a very clear strategy to offer total solutions to the construction sector. you will get the widest assortment and highest accessibility complemented with attractive services.” Frank stenstrand, product Manager cramo fleet Management 138 www.cramo.com Variations in product assortment may occur construction equipment dumpers tracked mini-dumpers Our product range includes dumpers that move on rubber tracks. In this way, damage to sensitive surfaces is avoided. The machines have a load capacity of between 1 and 2.5 tons. In addition, the smaller dumpers are self-loading. If the material you are to move has been dumped onto the ground and is thus loosely layered, the self-loading dumper is usually a good choice (does not apply to blasted rock or similar). However, when moving material from maiden soil, most often a separate machine for excavating and loading is required. When moving material over ground with poor bearing capacity, by virtue of its low ground pressure, the Morooka MST-300VD or MST-300VDR is a good alternative. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5. Prod no Designation Length mm 1242350 Hinowa HP 1000, self-loading, petrol 1810 1241380 Morooka MST-300VD 3160 1241780 Morooka MST-300VDR, 180° swivelling body 3510 1241780 Kubota KC 250HR, 180° swivelling body 3650 1241820 Take Job TCR50, 180° swivelling body 4660 Width Height mm mm 1000 1380 1640 1620 1600 2250 1775 2370 2060 2720 wheeled mini-dumpers Working weight kg 685 2200 2400 2430 5680 Loading Loading cap kg vol m3 1 000 0.45 2 500 0.88 2 500 0.9 2500 0,9 3800 2 Driving Ground press speed km/h w load kg/cm 4.0 0.45 9.0 0.32 9.0 0.33 6/11 - 6/8.6 0.33 Our wheeled dumpers have a loading capacity of 1-10 tons. Depending on the size the machines are available in different configurations, for example hi-tip and/or swivelling body. Wheeled dumpers are thanks to the high transport speed a suitable choice for longer transport distances. The biggest model is registrated for transport on public roads. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5. Prod no Designation 1227550 Dumper 4x4, Thwaites 1 ton hi/swivel tipping 1227560 Dumper 4x4, Thwaites 1.5 ton hi/swivel tipping 1227560 Dumper Ausa D120 AHA, hi tipping 1223580 Dumper 4x4, Thwaites 3 tonne swivel tipping 1223640 Dumper 4x4, Thwaites 6 tonne swivel tipping 1233111 Dumper Hydrema 912C swivel tipping 1233111 Dumper Hydrema 912D, swivel tipping www.cramo.com Length mm 3032 3623 3142 4010 4752 5850 5900 Width Height Working Loading Loading Driving Dump mm mm weight kg cap kg vol m3 speed km/h height mm 982 1822 1200 1000 0.5 12 1573 1469 1844 2035 1500 0.9 22 1680 1200 2000 1335 1200 0.5 17 1680 1757 2013 2820 3000 1.7 22 1850 2240 2230 4285 6000 3.2 26 1100 2470 2750 7420 10000 5.6 30 1200 2470 2750 7520 10000 5.6 30 1200 Variations in product assortment may occur 139 CONSTRUCTION EQUIPMENT BACKHOE LOADER & excavators backhoe loaders The back hoe is a real all-rounder. It can load, unload and dig. Thanks to its high mobility the back hoe loader moves quickly between work sites. All our models are equipped with 4-wheel drive and 4-wheel steering. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5. Prod no Type Description 2622127 JCB 3CX Backhoe loader 2642131 JCB 4CX Backhoe loader 2642131 Komatsu WB97S-5 Backhoe loader 2642132 Cat 442D Backhoe loader 2642133 Cat 444E Backhoe loader compact excavators < 3 ton Length mm 5620 5910 5895 5760 6085 Width mm 2350 2330 2320 2396 2434 Height mm 3610 3540 2830 3740 3871 Working weight kg 7370 7950 8150 7809 8898 At Cramo you will have access to the largest and most extensive range of compact excavators on the market. For the smallest jobs, there are machines with a working weight of only 1 ton. A special trailer makes transportation to and from the worksite simple; only a mid-sized car is required. All compact excavators include a digging bucket, a trenching bucket and a ditch cleaning bucket. All machines are equipped with quick couplers that make bucket changes quick and simple. Prod no Type Comment Length 2113110 Kubota K008-3 Extendendable undercarriage. Swing boom, w/o cab 2750 2113110 Kubota U10-3 Extendendable undercarriage. Swing boom, w/o cab incl trailer 2980 2113113 Cat 301.8C Extendendable undercarriage. Swing boom 3695 2113113 Kubota KX41-3V Extendendable undercarriage. Swing boom 3660 2113113 Take Job TB016 Extendendable undercarriage. Swing boom 3695 2113120 Cat 302.5C Swing boom 4515 Width mm 700-860 750-990 980-1340 990-1300 980-1300 1450 140 www.cramo.com Variations in product assortment may occur Height mm 1420 1420 2190 2280 2295 2300 Working weight kg 850 990 1785 1720 1615 2850 CONSTRUCTION EQUIPMENT excavators compact excavators > 3 ton Prod no Type Comment Length Width mm 2113130 Cat 303.5 Swing boom 5070 1550 2113130 Cat 303CR Swing boom, compact radius 4740 1550 2113130 Cat 303C CR Swing boom, compact radius 4770 1550 2113130 Kubota U35-3 Swing boom, compact radius 4865 1700 2113130 Take Job TB138FR Swing boom, compact radius 4715 1740 2113140 Cat 304.5 Swing boom 5680 1900 2113140 Cat 304CR Swing boom, compact radius 5280 1980 2113140 Cat 304C CR Swing boom, compact radius 5280 1980 2113140 Kubota U48-4L Swing boom, compact radius 5330 1960 2113140 Kubota U50-3 Swing boom, compact radius 5385 1960 2113150 Take Job TB153FR Swing boom, compact radius 5330 2000 specifications ax gg (k N ) 2.0 2.0 4.5 4.0 4.6 5.0 4.5 4.8 4.6 4.6 4.7 4.7 4.6 4.6 4.9 4.6 5.0 di e rc fo (k ) /h m www.cramo.com M g in gg (k ce or tf u ko d Kubota K008-3 Kubota U10-3 Cat 301.8C Kubota KX41-3V TakeJob TB016 Cat 302.5C Cat 303.5 Cat 303 CR Cat 303C CR Kubota U35-3 TakeJob TB138FR Cat 304.5 Cat 304CR Cat 304C CR Kubota U48-4L Kubota U50-3 TakeJob TB153FR ) m (m h ac ) re m m ax t( M h ig C. he ) p m m (m du th ax ep M d B. g in ) N A. Di ea Br ee Sp model C Working weight kg 3550 3330 3555 3590 3860 4595 4490 4920 4775 4890 5615 B A Height mm 2440 2480 2500 2440 2555 2530 2595 2550 2550 2540 2585 9.8 10.4 15.4 15.6 13.1 25.0 25.6 26.2 33.0 31.3 26.5 39.5 36.6 36.6 33.0 32.9 36.3 Variations in product assortment may occur 4.5 5.4 8.8 7.8 9.0 13.1 13.7 15.5 16.9 18.3 18.0 19.4 20.9 20.9 22.0 23.5 25.2 1720 1800 2320 2380 2175 2930 3560 3330 3200 3350 3110 3930 3750 3570 3380 3650 3590 2030 2210 2480 2440 2575 3280 3800 3240 3610 3590 3595 4028 3810 3810 3770 3985 3710 3020 3380 3890 3910 3700 4930 5540 5500 5470 5610 5130 6018 6080 6080 5710 6030 5755 141 CONSTRUCTION EQUIPMENT excavators tracked • cat 307c CAT 307C has good performance and versatility. Its medium size makes it useful at many jobs. The driver has great visibility and manouverability in the large cab. Type Cat 307C Product no 2113160 Transport length, mm 6070 Transport width 2290 Transport height 2630 Operating weight, kg 7210 Quick coupler Y Boom Monobloc Track Rubber or steel A. Max digging depth, mm 4110 B. Max reach 6200 C. Max dump height 5150 Bucket force, kN 44 Stick force 35 Transport speed, km/h 5.3 m 8 7 6 5 4 D 3 C 2 1 0 B 1 F 2 E A 3 4 Accessories • see page 146 5 9 8 7 6 5 4 3 2 1 0 1 2 m RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 tracked • cat 307c SB, 307B CAT 307B, 307C SB deliver good performance and versatility. Their sizes works in many situations. The swing boom expands the possibilities for this machine. The driver experiences great visibility and manoeuvrability in the large cab. m 8 7 6 5 4 D 3 C 2 1 0 B 1 F 2 E A 3 4 5 9 8 7 6 5 4 3 2 1 0 1 2 m Type Product no Transport length, mm Transport width Transport height Operating weight, kg Quick coupler Boom Swing boom Tracks A. Max digging depth, mm B. Max reach C. Max dump height Bucket force, kN Stick force Transport speed, km/h Cat 307C SB 2113175 6070 2290 2630 8390 Y Monobloc Y Rubber 4700 7420 4450 31.9 43.7 5.3 307B 2113175 6750 2200 2640 9300 Y Variable angle Y Rubber 4690 7410 4460 44 31 4.1 Accessories • see page 146 RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 142 www.cramo.com Variations in product assortment may occur CONSTRUCTION EQUIPMENT excavators tracked • Kubota KX080-3 Kubota KX080-3 is a high quality, high performance excavator. The 8 tonne machine is versatile. The narrow width makes it suitable for working in close conditions. Many of our Kubota KX080-3 are possible to get with Tilt Rotator. The cabin design provides a high operator comfort with great visibility through large windows. Type Kubota KX 080-3 Product no 2113175 Transport length, mm 6450 Transport width 2200 Transport height 2620 Operating weight, kg 8195 Quick coupler Y Boom Monobloc Swing boom Y Tracks Rubber A. Max digging depth, mm 4600 B. Max reach 7330 C. Max dump height 5250 Bucket force, kN 65.2 Stick force 38.1 Transport speed, km/h 5.1 m 8 7 6 5 4 D 3 C 2 1 0 B 1 F E 2 A 3 4 5 Accessiories • see page 146 9 8 7 6 5 4 3 2 1 0 1 2 m RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 tracked • take Job TB180 FR Take Job TB 180FR is well renounced and a reliable machine with high performance and specification. It has a zero tail swing and swing boom which makes it greatly appreciated when working in close conditions. Type Take Job TB180 FR Product no 2113175 Transport length, mm 6150 Transport width 2300 Transport height 2770 Operating weight, kg 8530 Quick coupler Y Boom Monobloc Swing boom Y Tracks Rubber A. Max digging depth, mm 4195 B. Max reach 6870 C. Max dump height 4300 Bucket force, kN 53.2 Stick force 34 Transport speed, km/h 5.4 B C A Accessiories • see page 146 RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 www.cramo.com Variations in product assortment may occur 143 CONSTRUCTION EQUIPMENT excavators tracked • Volvo EC140CL Volvo EC140CL delivers high performance and is robust and efficient with a hydraulic prioritisation system which speeds up the current movement. Volvo Care Cab is standard with large and spacious interior. Great visibility with large windows. A B H F G EC14 0CL C D E Type Product no Transport length, mm Transport width Transport height Operating weight, kg Quick coupler Boom Tracks Max digging depth, mm Max reach Max dump height Bucket force, kN Stick force Transport speed, km/h Volvo EC140CL 2113221 7700 2590 2800 14600 Y Monobloc Steel 5500 8300 5980 87.3 65.7 5.5 Accessories • see page 146 2,44 m RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 tracked • volvo EC210CL Volvo EC210CL have high comfort, safety, productivity and efficiency. With a hydraulic prioritisation system, much power, high quality and design for easy operating it is extremely versatile. A B H F G C D E (m) 2,44 m Type Volvo EC210CL Product no 2113251 Transport length, mm 9650 Transport width 2990 Transport height 3120 Operating weight, kg 22400 Quick coupler Y Boom Monobloc Tracks Steel Max digging depth, mm 6700 Max reach 9900 Max dump height 6650 Bucket force, kN 130.4 Stick force 117.2 Transport speed, km/h 5.5 Accessories • see page 146 RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 144 www.cramo.com Variations in product assortment may occur CONSTRUCTION EQUIPMENT EXCAVATORS tracked • volvo ECR235CL Volvo ECR235CL is a very stabile machine with a combination of raw power and high precision. A low noise level and high comfort makes it operator friendly. The new rounder shape at this compact radius machine makes it flexible and suitable for work in open and close places. Type Volvo ECR235CL Product no 2113261 Transport length, mm 9080 Transport width 3090 Transport height 3235 Operating weight, kg 24430 Quick coupler Y Boom Monobloc Tracks Steel Max digging depth, mm 6800 Max reach 9900 Max dump height 7570 Bucket force, kN 124.7 Stick force 116.7 Transport speed, km/h 5.3 Accessories • see page 146 (m) 10 9 7 6 5 4 3 2 ECR 235Cl 1 -1 -2 -3 -4 -5 -6 -7 11 10 1 2 (m) 3 4 5 6 7 8 9 RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 www.cramo.com Variations in product assortment may occur 145 CONSTRUCTION EQUIPMENT excavators wheeled • Volvo Ew140C Volvo EW140C is a classic wheeled excavator with many possibilities as a tool carrier. Many tools gives great possibilities. The operator has great visibility in the cab and together with the possibility to work in rough terrain this machine is very versatile. The powerful engine gives optimal power, maximum torque and silent drive. Grävdiagram & Grävkrafter Type Volvo EW140C Product no 2124161 Transport length, mm 7460 Transport width 2490 Transport height 3330 Operating weight, kg 15400 Quick coupler Y Boom Monobloc Rototilt Y Max digging depth, mm 5700 Max reach 9300 Max dump height 5890 Breakout force, kN 94 Digging force 70.3 Transport speed, km/h 35 Accessories • see page 146 Ställbar bom 4,7 m och skaft 2,0 m, 2,45 m, 2,6 m, 3,1 m RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 tracked • volvo Ew160C Volvo EW160C is as the EW140C a classic wheeled excavator with many possibilities. The operator has great visibility in the cab and together with the possibility to work in rough terrain this machine is very versatile. The powerful engine with 20hp more than EW140C gives much extra bucket and stick force. In total the engine delivers optimal power, maximum torque and silent drive. Grävdiagram & Grävkrafter Ställbar bom 5,1 m och skaft 2,0 m, 2,45 m, 2,6 m, 3,1 m Type Volvo EW160C Product no 2124171 Transport length, mm 8190 Transport width 2540 Transport height 3190 Operating weight, kg 17430 Quick coupler Y Boom Monobloc Rototilt Y Max digging depth, mm 6200 Max reach 9800 Max dump height 6190 Bucket force, kN 108 Stick force 78.8 Transport speed, km/h 35 Accessories • see page 146 RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 146 www.cramo.com Variations in product assortment may occur CONSTRUCTION EQUIPMENT loaders skid steer and tracked There are a number of accessories for the loaders that enable loading and unloading, sweeping, snow clearance, etc. When working on sensitive and soft surfaces, the TakeJob TL230 on rubber tracks is thus a more appropriate choice than the skid steer. In confined areas and when maximal speed is needed, Kramer 180-480 are a better choice. 4-wheel steering also makes turning easy. Normally, with due consideration to available space and the extent of the work, the largest possible machine should be selected. This will provide the best total economy. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type Comment Length Skidsteer type 2213111 Bobcat 453 2468 2213111 Bobcat 463 2555 2213111 Gehl SL1640 2500 2213141 Cat 216B 3233 22213150 Cat 246 3515 Width mm 899 900 915 1525 1676 Height Working mm weight kg 1816 1813 1810 2170 2092 1210 1301 1290 2589 3274 Bucket width 901 914 915 1576 1680 Tracked type 2221040 Cat 247B Rubber tracks, ground pressure 0.26 kg/cm2 3316 1676 1990 3211 1830 2221050 Cat 277B Rubber tracks, ground pressure 0.26 kg/cm2 3716 1898 2074 4250 2050 2221040 TakeJob TL 230 rubber tracks 3500 1650 2300 3800 1700 specifications c pa ca d ee m (k ) /h C B A g) (k ad lo g in ) m pp ti (m ht ig ) he p m m (m du ht ig ax m he ) in c. m p (m B. ht ig he ng r) ki te or (li w ity ax m a. et ck Bu sp model Bobcat 453 Bobcat 463 Gehl SL1640 Cat 216B Cat 246 Cat 247B Cat 277B TakeJob TL 230 Kramer 180 Kramer 250 Kramer 280 Kramer 380 Kramer 350 Kramer 480 8,4 9,9 8,9 12,5 12,1 12,2 9,7 10,4 20 20 20 40 20 40 200 200 n/a 400 400 380 370 351 300 250 650 750 350 850 3048 3130 3167 3709 3965 3804 4025 3030 2460 2661 2820 2195 2661 3100 2347 2400 2438 2854 3099 2862 3091 2370 2580 2781 3020 3065 2781 1250 1808 1886 1836 2169 2398 2103 2349 2370 2075 2292 2300 2400 2254 2500 663 681 n/a 1270 1649 1529 2796 2100 1200 1080 2350 3000 1250 3400 * Tipping load at full turn www.cramo.com Variations in product assortment may occur 147 CONSTRUCTION EQUIPMENT loaders wheeled compact There are a number of accessories for the loaders that enable loading and unloading, sweeping, snow clearance, etc. In confined areas and when maximal speed is needed, Kramer 180-480 are a good choice. 4-wheel steering also makes turning easy. Normally, with due consideration to available space and the extent of the work, the largest possible machine should be selected. This will provide the best total economy. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type Comment Length 2217451 Kramer 180 4-wheel steering 3810 2217452 Kramer 250 4-wheel steering 3890 2217454 Kramer 350 4-wheel steering 3970 2217472 Kramer 280 4-wheel steering 4610 2217482 Kramer 380 4-wheel steering 4890 2217484 Kramer 480 4-wheel steering 5080 Width mm 1150 1150 1150 1500 1750 1850 Height Working mm weight kg 2100 1860 2150 1540 1720 1720 2340 3300 2680 4500 2510 4800 many accessories make the kramer machines very versatile 148 Diffrent shovels for snow, sand, gravel and rock Forks for material handling Sweapers for dust and dirt Green equipment for farming and garden www.cramo.com Variations in product assortment may occur Bucket width 1180 1200 1200 1650 1800 1900 CONSTRUCTION EQUIPMENT loaders wheel loader Our wheel loader range from 5 to 17 tons operating weight and are thanks to a number of accessories/work tools versatile machines suitable for many applications. They are easy to operate and offer an excellent operators environment. To further enhance the efficiency all units are equipped with a hydraulic quick coupler. All machines from 8 tons operating weight are equipped with a central lubricating system. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type 2217711 Cat 906 2217721 Cat 908 2217711 Komatsu WA 70-5 2217722 Volvo L35B 2217741 Cat IT14G 2217755 Cat 924 G 2217765 Cat IT28G 2217765 Cat 930H 2217751 Volvo L60F 2217781 Volvo L90F Length mm 5850 6300 5250 5480 6500 7300 7300 7601 5340 5370 Width mm 1755 1960 1800 1932 2260 2468 2537 2455 2440 2490 Height width 2680 2770 2470 2715 3100 3227 3268 3278 3220 3280 Working weight kg 5100 6150 5400 6100 8100 11300 12800 13170 13300 17000 Bucket volume L 800 1000 800 1200 1600 2000 2300 2500 2600 2800 Bucket width mm 1900 2080 1800 2000 2500 2650 2650 2550 2700 2900 Quick coupler type ABL 120 ABL 120 ABL ZL20/25 ABL 120 ABL 120 ABL 120 ABL 120 ABL 120 ABL 120 ABL 120 specifications ca ) /h m (k pa d C model g) (k ad ) lo m g in (m pp ht ti ig he p m ) m du (m ax ) ht m g i m c. he (m n ht pi ig B. he ng r) ki te or w (li ty ci et ee B ax m a. ck Bu sp A Cat 906 Cat 908 Komatsu WA 70-5 Volvo L35B Cat IT14G Cat 924G Cat IT28G Cat 930H Volvo L60F Volvo L90F 20 20 20 30 32 38 38 38 43 46 800 1000 800 1200 1600 2000 2300 2500 2600 2800 4000 4255 4190 4260 4800 5237 5045 5303 5120 5380 3135 3390 3150 3260 3798 3830 3980 4099 3870 3960 2300 2550 2435 2580 2800 2604 2900 2833 3580 3650 3030* 3760* 3750* 4350* 4792* 6590* 7347* 8310* 6310* 9540* *) Tipping load at full turn. www.cramo.com Variations in product assortment may occur 149 CONSTRUCTION EQUIPMENT accessories accessories for excavators AND WHEEL LOADERS There are a number of accessories for the loaders that enable loading and unloading, sweeping, snow clearance, etc. In confined areas and when maximal speed is needed, Kramer 180-480 are a good choice. 4-wheel steering also makes turning easy. Normally, with due consideration to available space and the extent of the work, the largest possible machine should be selected. This will provide the best total economy. Buckets for loaders for excavators 150 Buckets Hydraulic hammer Buckets Ripper Rototilt Asphalt cutter www.cramo.com Diffrent buckets | Forks | Crane arm | Timber clamp etc Variations in product assortment may occur CONSTRUCTION EQUIPMENT accessories www.cramo.com Variations in product assortment may occur 151 CONSTRUCTION EQUIPMENT demolition Demolition robot Time is money and the principal rule when choosing demolition equipment is simple: Always the largest machine possible; it will give you the best total economy. However, for many jobs the smallest machine, the Brokk 40 is the only alternative due to such things as beam layout with limited bearing capacity or narrow door openings. It replaces three to five handheld demolition machines, and as an accessory, there are also hydraulic shears that are suitable when demolishing walls and where loud noise must be avoided. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type Length 2523520 Brokk 40 1200 2523520 Brokk 50 1560 2523451 Brokk 90 1821 2523451 Brokk 110 2340 Width mm 600 600 780 780/1100 Height mm 940 940 1210 1245 Working weight kg 384 550 930 1400 Trpt speed km/h 1.2 2.1 2.3 3.4 Max digg mm 450 500 1250 1600 Prod no Type Max width Weight Max capacity mm mm 2551340 Brokk CC320 hydraulic shear for Brokk 90 and 110 320 139 32,6 ton Hydraulic hammer for Brokk 40 - 30 60 Joule Hydraulic hammer for Brokk 90/110 - 120 255 Joule Bucket for Brokk 40 260 17 12 litre Bucket for Brokk 90 520 64 60 litre Bucket for Brokk 110 520 64 60 litre 152 www.cramo.com Variations in product assortment may occur CONSTRUCTION EQUIPMENT compaction guide to the right roller ) cm ax (m ) y cm la x .c a m ils ) l( so m fil c lty ck ax si ro ) (m lt cm si ax (m ) m el xc av a gr m l( & a i ) nd er m at sa (m m h se ig ba ) /h w nd cm lo ea g/ e as (k ud bb lit ad p o n) su rl to am t( ea t( n) to Tandem vibratory roller www.cramo.com gh ei clay CF 47 Towed roller with padfoot drum rock fill. mixed soils. sub base and base material CH 47 Towed single drum roller CS-563E Self propelled single drum roller CS-583E CS-683E mixed soils. sub base and base material RT820CC Trench compactor RT 82-SC Trench compactor AT 38 Towed single drum roller BW 122D-HG Self propelled single drum roller CA 121D -”CA 141D -”CA 152D -”CS-423E. CS-433E -”H 3307 -”CS-563E -”H 3412 -”CA 302D -”CS-583E -”CS 74 -”CS-683E -”H 3518 -”CA 602 -”asphalt and base material CC 900 BW 90AD-2 CB-214D/E CB-224D/E CC 102 CC 122 BW 100AD-3 BW120AD-3 CB24 CB-334D/E CB-225E CB-335E w gh ei w type lin le u od m g tin a er ic at st m u dr op model 6.1 6.1 5.9 12.1 15.5 18.8 5.9 6.9 9.9 13.3 1.4 1.5 3.8 2.2 4.2 4.9 7.3 7.0 6.8 12.2 12.3 12.7 15.4 15.7 18.8 17.9 18.6 1.6 1.5 2.5 2.7 2.4 2.6 2.5 2.7 2.7 4 2.6 2.6 - 1.5 - - - 35 31 1.5 50 32.2 0.9/1.7 50 46.2 0.9/1.8 75 62.2 0.9/1.8 75 65 60 90 100 35 40 70 75 100 100 150 180 - 3.8 1.1 1.8 2.3 3.7 3.5 3.9 6.9 6.8 8.1 9.9 9.9 13.3 10.8 12.7 25 9.2 12.8 15.1 22.1 21 23.3 32.2 31.3 37.2 46.2 47.7 62.2 48.6 59.6 0.8 1.4 1.2 0.8/1.7 0.8/1.7 0.6/7.7 0.9/1.8 0.9/1.9 0.8/1.7 0.9/1.8 0.9/1.8 0.9/1.8 1.2/2.0 1.1/1.8 40 40 20 30 30 40 40 40 60 50 50 75 60 75 60 70 45 40 25 35 35 45 45 30 60 60 60 90 70 100 70 60 30 30 10 10 10 25 25 25 45 40 60 70 45 75 50 - 15 - 9.1 8.4 12.2 10.9 11.4 10.2 12.4 11.3 11.3 15.2 10.7 15 0.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.4 0.5 0.4 15 20 25 25 25 25 20 20 25 30 25 30 30 30 30 30 30 30 30 25 30 25 30 Variations in product assortment may occur - 100 100 150 150 180 150 153 CONSTRUCTION EQUIPMENT COMPACTION TOWED ROLLERS Towed rollers are a less expensive alternative to the self-propelled single drum roller when you have access to a suitable towing vehicle. This type of roller is suitable for road construction, streets, industrial construction and the like. At Cramo, you can rent towed rollers for the compaction of not only soil and clay but also rock fill. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type 4413241 Dynapac CH 47 Length mm 4810 Width mm 2130 Height mm 1475 Working weight kg 5900 Drum width mm 1905 Line load kg/cm 31 single drum rollers Most often the self-propelled single drum roller is the most effective and most flexible alternative for compacting soil, clay or rock fill. Cramo has a wide range of single drum rollers with working weights between 2 and 19 tons. All units over 12 tons are equipped with a compaction meter; in addition, these can be supplemented with compaction computers for documenting work performed. Apart from first-class equipment, Cramo gives you access to quaified advice regarding the right machine, the number of passes and suitable layer thicknesses to reach the desired result. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type 4415320 Bomag BW 122D-HG 4415331 Dynapac CA 134D 4415331 Dynapac CA 141D 4415343 Cat CS-423E, CS-433E 4415343 Dynapac CA152D 4415343 Hamm 3307 4415362 Cat CS-563E 4415362 Hamm 3412 4415364 Dynapac CA302D 4415372 Cat CS-583E 4415372 Cat CS74 4415383 Cat CS-683E 4415383 Hamm 3518 4415383 Dynapac CA602 154 Length mm 2970 3958 3581 4960 4776 4680 5760 5705 5450 5830 5970 6000 6210 6002 www.cramo.com Width mm 1290 1494 1626 1800 1852 2100 2290 2130 2340 2370 2300 2460 2390 2400 Height mm 1440 2507 2370 2970 2825 2790 3070 2950 2980 3070 3070 3020 2990 2957 Working weight kg 2200 4775 4900 6990 7300 6840 12130 12200 12700 15430 15687 18800 17850 18600 Drum Drum module kg width mm 1100 1200 2075 1370 2300 1524 3510 1676 3700 1676 3960 6850 2130 6705 8100 2130 9860 2130 10009 2300 13300 2130 10785 12700 2130 Variations in product assortment may occur Static line load kg/cm 9.2 15 15.1 21 22.1 23.3 32.2 31.3 38.0 46.2 47.7 62.2 48.6 59.6 CONSTRUCTION EQUIPMENT COMPACTION trench compactors For compaction of back filling in trenches and for compaction of embankment and sub base material. Vibrating padfoot drums make the machines specially suited for silty soils and clay. Remote control increase the operators safety. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type Comment 4422460 Wacker RT82-SC Remote control, padfoot drums 4422460 Dynapac LP8500 Remote control Length mm 1855 1875 Width mm 820 850 Height mm 1230 1207 Weight Drum width mm mm 1473 820 1650 850 TAndem rollers When it comes to rollers for asphalt and the compaction of base layers, Cramo has articulated tandem rollers between 1.5 and 4 tons operating weight. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type 4422541 Dynapac CC900 4422541 Bomag BW 90AD-2 4422551 Cat CB-214D/E 4422551 Cat CB-224D/E 4422551 Dynapac CC102 4422551 Dynapac CC122 4422551 Bomag BW 100AD-3 4422551 Bomag BW 120AD-3 4422551 Hamm HD12VV 4422561 Cat CB-334D/E 4422561 Hamm HD13VV 4452250 Cat CB-225E combi Length mm 1953 1862 2430 2430 2450 2450 2425 2425 2454 3120 2856 2430 www.cramo.com Width mm 950 956 1100 1300 1150 1280 1076 1276 1268 1390 1388 1300 Height mm 2405 2300 2589 2589 2640 2640 2460 2460 2382 2550 2586 2586 Working weight kg 1590 1520 2490 2670 2350 2600 2470 2700 2540 3960 3675 2300 Variations in product assortment may occur Drum Static linerar width mm load kg/cm 900 9.1 900 8.4 1000 12.2 1200 10.9 1070 11.4 1200 11.2 1000 12.4 1200 11.3 1200 10.5/10.7 1300 15.2 1300 14.3 1200 10.7 155 CONSTRUCTION EQUIPMENT power diesel powered generators The generator unit is used in places where there is no permanent working electric power network. It can be needed for construction work, at harbours, outdoor events, for supply to computer installations during repair work and other temporary interruptions to the electricity supply. We have a wide range of generators with capacities from 10 kVA and we gladly assist you in choosing the right generator capacity to meet your needs. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type 5213030 Caterpillar XQE20 5213030 Atlas Copco QAS20 5213040 Atlas Copco QAS28 5213040 Atlas Copco QAS30 5213040 Atlas Copco QAS38 5213040 Atlas Copco QAX30, trailer 5213040 Atlas Copco QAS40KD 5213041 Atlas Copco QAS45 5213041 Atlas Copco QAS48 5213050 Atlas Copco QAS60 5213050 Atlas Copco QAS60, trailer 5213050 Atlas Copco QAS78 5213050 Atlas Copco QAS85 5213060 Atlas Copco QAS100 5213060 SDMO R110C2 5213070 FG Wilson P150P2 5213070 Atlas Copco QAS150 5213090 FG Wilson P250H2 5213092 SDMO R275 5213093 Atlas Copco QAS275 5213110 Atlas Copco QAS325 5213110 SDMO V350C2 5213120 FG Wilson P550E1 5213130 FG Wilson P500P3 5213130 FG Wilson P700E5 5213130 FG Wilson P635P5 5213130 SDMO R700C2 5213131 Atlas Copco QAS500 156 Length mm 1684 2070 2080 2450 2080 3620 2100 2450 2562 2450 5020 2562 2800 2940 2554 2500 3380 2960 4004 3955 4020 4475 3700 3700 4111 4111 5031 4800 Width mm 950 1000 951 1100 951 1410 950 1100 1031 1100 1670 1031 1100 1100 1150 1120 1180 1003 1380 1431 1320 1410 1100 1100 1536 1536 1690 1550 www.cramo.com Height mm 1347 1180 1157 1480 1157 1258 1180 1480 1307 1480 2130 1307 1400 1500 1680 1528 1710 1718 2125 2128 2020 2430 2143 2143 2246 2246 2662 2300 Working weight kg 755 994 1092 1460 1166 1016 1048 1547 1569 1566 2195 1669 1795 1960 1955 2029 2532 2802 3590 3868 4386 4300 3958 3958 4870 4870 6090 6542 Cap, stand-by kVA (kW) 20 (16) 22 (17.6) 31 (25) 33 (26.4) 42 (33) n/a 45 (36) 50 (40) 55 (44) 66 (53) 66 (53) 84 (67) 77 (62) 110 (88) 110 (88) 150 (120) 165 (138) 275 (220) 275(220) 303(242) 358(286) 350 (300) 550 (440) 550 (440) 700 (560) 700 (560) 700 (560) 550 (440) Variations in product assortment may occur Cap, prime kVA (kW) 18 (14) 20 (16) 28 (22) 30 (24) 38 (30) 30 (24) 41 (33) 45 (36) 50 (40) 60 (48) 60 (48) 76 (61) 70 (56) 100 (80) 100 (80) 135 (108) 150 (132) 250 (200) 250 (200) 275 (220) 325 (260) 318 (273) 500 (400) 500 (400) 635 (508) 635 (508) 636 (509) 500 (400) Tank Fuel cons vol L at 75% load 50 3.5 45 3.6 100 4.5 135 5.2 100 5.5 80 5.7 92 8.7* 135 7.9 175 8.0 230 14.0 230 14.0 175 11.7 200 12.8 170 16.5 190 17.9 349 24.2 313 31.3* 350 58.9 390 45.7 603 60.3* 603 67.0* 470 52.8 928 73.6 928 73.6 1000 93.2 1000 93.2 610 94.5 905 72.8 CONSTRUCTION EQUIPMENT power generator guide In order to quickly calculate the generator size required to power a specified 3-phase device, the requisite generator effect can be roughly estimated in the following way: For operationg a 3-phase welding unit* If the answer is required in kVA: Multiply the unit's rated output current (Ampere) by 0.14. Example: A welding unit is at 200A, 200 x 0.14 = 28 kVA. If the answer is required in kW: Multiply the motor's rated output current (Ampere) by 1.48. Example: A motor is at 25A; 25 x 1.48 = 37 kW. If the answer is required in kW: Multiply the unit's rated output current (Ampere) by 0.11. Example: A welding unit is at 200A, 200 x 0.11 = 22 kW. For operating a 3-phase electric motor with a 2-stage start If the answer is required in kVA: Multiply the motor's rated output current (Ampere) by 0.95. Example: A motor is at 25A; 25 x 0.95 = 23.75 = 24 kVA. * A welding unit without a capacitor bank requires twice the generator effect. For operating a 3-phase electric motor with direct start If the answer is required in kVA: Multiply the motor's rated output current (Ampere) by 1.85. Example: A motor is at 25A; 25 x 1.85 = 46 kVA. www.cramo.com If the answer is required in kW: Multiply the motor's rated output current (Ampere) by 0.75. Example: A motor is at 25A; 25 x 0.75 = 18.75 = 19 kW. Variations in product assortment may occur 157 CONSTRUCTION EQUIPMENT COMPressors electric and diesel When it comes to size, it is best to choose a compressor with a capacity that exceeds the estimated consumption by approximately 20 percent. When working with pneumatic tools, or when the compressed air is to be connected to the drying equipment and a compressed air system, machines with aftercooler and water separator are required to avoid problems with freezing and corrosion. When higher air quality is required, there is filter equipment that cleans the air from both dirt particles and oil. By filtering the compressed air, which is usually termed “technically oil-free air” is achieved. In the event 100% oil-free air is required, we can offer Atlas Copco PTS 916 compressors. For many applications, e.g. for cable blowing and sand blasting, a working pressure of 10 to 12 bar is suitable. Cramo’s product line comprises such compressors with capacities up to 21 m³/min. For well drilling and energy drilling, as well as other special applications, there are machines that run with a working pressure of up to 25 bar. ACCESSORIES Compressed air hose - Flat 3/4"-2” - Std 1/2"-2” Lubricator Blow pipe with tap Sub-cooler Water separator RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type Length Width Height Working Capacity mm mm mm weight kg m3/min 5311350 Atlas Copco GA808, electric 3480 1636 1772 2410 11 5311340 Atlas Copco GA45+, electric 2040 970 1802 1030 8 5311360 Atlas Copco GA1108, electric 3480 1636 1772 2630 15.5 5321340 Atlas Copco XAS90, special filters3600 1600 1375 1065 5.2 5321330 Atlas Copco XAS 67 or equivalent 3660 1410 1250 930 3.7 5321330 Kaeser M38 or equivalent 3500 1420 1240 815 3.7 5321340 Atlas Copco XAS 97 or equivalent 3660 1410 1250 940 5.2 5321340 Kaeser M51 or equivalent 4000 1680 1500 1230 5.6 5321350 Kaeser M80 or equivalent 4400 1780 1520 1480 8.1 5321350 Atlas Copco XAS 146 4356 1716 1661 1660 8.4 5321360 Atlas Copco XAS 186 4356 1716 1661 1730 11.1 5322130 Atlas Copco XAMS 355 4210 1810 2369 3860 21 5322140 Atlas Copco XAMS 615 4520 2210 2462 5500 34.2 5322120 Atlas Copco XATS 156 4356 1716 1661 1730 10 5322120 Kaeser M121 4420 1880 1600 1880 10 5322120 Kaeser M122 4710 1880 1600 1895 10 5324121 Atlas Copco XAHS 186 4356 1716 1661 1790 10.5 5324130 Atlas Copco XAHS 365 4210 1810 2369 4300 21.5 5326131 Atlas Copco XRHS 385 4520 2210 2462 5240 22.3 5328132 Atlas Copco XRVS 346 4908 2150 2462 5400 20 5325365 Compressor diesel with hydralic power packet XAS47DD/RH572/ 20m hose/CLG30 2870 1320 1250 799 2.5 158 www.cramo.com Capacity Working Fuel cons L/sec pressure Bar at 75% load 183 7 Y 133 8 - 259 7 Y 87 7 N 62 7 63 7 - 88 7 93 7 - 135 7 140 7 N 185 7 Y 350 8.6 Y 570 8.6 Y 166 10.3 N 166 10 Y 167 10 Y 175 12 Y 358 12 Y 372 20 Y 333 25 Y Variations in product assortment may occur 42 7 - CONSTRUCTION EQUIPMENT drilling Drill rigs The Tamrock Commando is suitable for hole diameters up to 41 mm and a drilling depth down to 6 metres; for individual holes, 45 mm hole diameters and a depths down to 9 metres. Both integral drill steels and threaded and tapered equipment can be used. All our Commando machines have remote control and are equipped with dust cleaner and a hydraulic winch. RECOMMENDED SAFETY EQUIPMENT Explanation on page 5 Prod no Type Length Width mm mm 8163621 Tamrock Commando 110E 4540 1850 8163622 Tamrock Commando 120RF 4560 1750 8163622 Tamrock Commando DC122R 4600 1800 8163623 Atlas Copco ROC TD15 4850 1770 www.cramo.com Height mm 2100 2090 2100 2250 Working weight kg 2450 2850 2800 2800 Hole diam mm 22 - 45 22 - 45 22 - 41 23 - 45 Drilling Steering depth m < 9 Cable control of drilling functions < 9 Radio control of all functions < 9 Radio control of all functions < 9 Radio control of all functions Variations in product assortment may occur 159 CONSTRUCTION EQUIPMENT 160 www.cramo.com Variations in product assortment may occur
Similar documents
construction auctions
Where-Is” with All Faults Basis. No Guarantees, or Warranties, NO REFUNDS!
More information