replacement chrome trim front speaker grilles lower speaker kit

replacement chrome trim front speaker grilles lower speaker kit

THE DRAG SPECIALTIES
NOVEMBER 2015
4" TWIN MUFFLERS
• Rolled and scalloped outer tip
• Matching scalloped inner tip
• Chrome finish
• Cobra’s exclusive constant
velocity louvered core
• Cores secured on the inside with no outer screws
• Classic Harley-Davidson sound, deep yet aggressive
• Sold in pairs
• Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
For 95-16 FLT/​FLHT/​FLHRFLHX/​FLTR and
$
399.95
1801-0841
H-D FL Trike models (except 15-16 FLRT)
DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD (“CARB”) DOES NOT PERMIT THE
USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF
OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER,
OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND
MANUFACTURER’S INFORMATION.
LOWER SPEAKER KIT
REPLACEMENT
CHROME TRIM
FRONT SPEAKER
GRILLES
• Complete kit includes speaker adapters,
grilles, 2 ohm speakers and all required
wiring to go in fairing lowers on
Twin-Cooled™ bikes
• Feature 1mm thick mesh
that comes painted semigloss black
• Lower adapters provide easy access to
the coolant reservoir, come in matte black
and can be installed as is or color-match
painted
• Mesh separates easily
from chrome trim for
painting, powder coating,
polishing, etc.
• Includes all required hardware and wiring
to complete the installation
• Supplied wire harness plugs into
Hogtunes RM series amps, but is
easily modified for other brands
of amps
• Can be used with most
brands of speakers
• Sold in pairs
NOTE: Required amplifier is
not included.
PART #
PART #
DESCRIPTION
4405-0414 For 14-16 FLHTK, FLHTKL, FLHTUCTG, 16 FLTRU
SUG. RETAIL
$
339.95
4405-0399
DESCRIPTION
SUG. RETAIL
For 15-16 FLTRX/​
$
79.95
FLTRXS/ 16 FLTRU
4405-0408
SADDLEBAG LID
SPEAKER GRILL SETS
• Direct replacements for H-D Boom Audio Saddlebag Lid
Speaker grills
• Include one left and one right side grill along with all
necessary mounting hardware
PART #
DESCRIPTION
For 14-16 FLHT, FLHX,
4405-0408
FLTRX, FLTRU models
For 98-13 FLHT, FLHX,
4405-0407
FLTRX, FLTRU models
SUG. RETAIL
$
84.95
79.95
4405-0407
dragspecialties.com
THE DRAG SPECIALTIES
NOVEMBER 2015
1¾", 40" SLASH-CUT DRAG PIPES
• Chrome drag pipes for swingarm frames with electric start
• Drag pipes feature slider channels
• Made in the U.S.A.
NOTE: Additional mounting clamps may be required to
mount exhaust systems and headpipes. Mounting clamps
are sold separately.
PART #
1800-1868
DESCRIPTION
For 70-84 FX w/ swingarm frame (no heat shields)
(requires hanger bracket PART #1861-1041)
SUG. RETAIL
$
226.95
1¾" OVER-THE-TRANSMISSION “S” DRAG PIPES
• Three-piece 40" slash-cut design
• Front ‘squish’ pipe fits inside the frame, and the rear pipe fits over the transmission
• Slider channel on the rear pipe
• Will not work with FLH battery
• Made in the U.S.A.
NOTE: Additional mounting clamps may be required to mount exhaust systems and headpipes. Mounting clamps are sold separately.
PART #
1800-1869
DESCRIPTION
For 48-64 Panhead
SUG. RETAIL
$
226.95
1¾" DRAG PIPES FOR FL MODELS
• 34" chrome drag pipes for 4-speed Shovelhead FL models with kick or electric start
• Clear H-D factory highway bars, but floorboard adapter PART #1861-1048 is
required (sold separately)
• Available in slash cut style
• Made in the U.S.A.
NOTE: Additional mounting clamps may be required to mount exhaust systems. Mounting clamps are sold separately.
PART #
1800-1867
DESCRIPTION
For 70-84 FL models w/ kick or electric start (no heat
shields) (requires mounting clamps PART #1861-1046)
SUG. RETAIL
$
193.95
DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD (“CARB”) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSIONRELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER’S INFORMATION.
2
ANGLED SADDLEBAGS
• Injection-molded ABS bags provide superior
strength and rigidity
• Angled-cut design gives the ultimate custom
look and provides maximum cornering clearance
• Saddlebags are stretched 5" longer than stock
to cover the muffler front to back and give that
stretched look
• Bags have cutouts for dual exhaust applications; block-off plates available separately
for single or shorty exhaust applications
• Accept OEM lids, latches and hardware (sold separately)
• Right- and left-side bags and block-off plates sold separately
PART #
DESCRIPTION
FOR 14-16 FLHT/​FLHR/​FLTRX/​FLHX MODELS
3501-1095
Left-side saddlebag
3501-1096
Right-side saddlebag
SUG. RETAIL
$
399.95
399.95
WHIP
ANTENNA
TOUR-PAK® HARDWARE KIT
• Direct OEM replacement for H-D®
radio antennas
• Complete kit, includes everything necessary to install a Drag Specialties tourbox
or H-D Tour-Pak®
• 14" L and screws into OEM antenna mounts
• Included lock set for Tour-Pak® and saddlebags keyed alike
• Not intended to replace CB antenna
PART #
4401-0188
DESCRIPTION
Whip antenna
SUG. RETAIL
$
17.95
FRONT AND REAR
BRAKE PADS
• Semi–metallic brake pads offer
a pad in between both the sintered
and organic brake pads
1721-1915
• Drag Specialties brake pads are
asbestos, nickel, and lead free
NOTE: If you are using
aftermarket billet steel rotors it is
recommended you use our OrganicKevlar® brake pads to avoid
damage to them. Sintered pads are
not recommended for billet steel
rotors, as the pad material is too
aggressive for those rotors.
PART #
3516-0208
DESCRIPTION
Complete kit (06-13)
SUG. RETAIL
$
199.95
1202-0108
CHROME REAR
BELT GUARDS
1721-1914
• High-quality stamped-steel
upper or lower rear belt guards
• Chrome finish
DESCRIPTION
OEM #
FRONT BRAKE PADS
For 14-16 XL
41300004
REAR BRAKE PADS
For 14-16 XL
41300072
SEMI-METALLIC
PAD PART #
1721-1914
1721-1915
SUG. RETAIL
$
29.95
26.95
• Simple bolt-on installation
PART #
DESCRIPTION
FOR 07-16 FXD MODELS
1202-0108
Upper guard
1202-0107
Lower guard
SUG. RETAIL
$
1202-0107
84.95
59.95
3
THE DRAG SPECIALTIES
NOVEMBER 2015
FEULING OIL PUMP CO.
Our friends at Feuling who specialize in high-quality, high-performance
OIL PRESSURE GAUGES
V-Twin engine components have been busy designing, testing (as
• Quality liquid-filled pressure gauge with 0-100 range
demonstrated in photo) and building new products like the ones here.
We at Drag Specialties have been busy designing and building the 2016
FatBook™ so that you will be able to quickly and easily get all of these and
other new products into your customers’ hands. Don’t let your customers
• 1.5" stainless steel case with white or
black dial face
• Brass 1/8 NPT male bottom port
• Made in the U.S.A.
down hard, stock up now.
2212-0608
2212-0611
PART #
2212-0608
2212-0609
2212-0610
2212-0611
CAM CHAINS/​BALANCE
SHAFT CHAINS
DESCRIPTION
White face, bottom port
Black face, bottom port
White face, back port
Black face, back port
SUG. RETAIL
$
29.95
29.95
29.95
29.95
1" DIAL INDICATOR
• Replacement universal 1" dial indicator for PART 
#3801-0144 (+/-0.001")
• Stock replacement chains
• Available for cam or balance
shaft applications
PART #
3801-0281
• Made in the U.S.A.
DESCRIPTION
Dial indicator
SUG. RETAIL
$
25.95
0925-0955
HIGH STRENGTH
FINAL DRIVE BELT
0925-0952
• Available with 14mm pitch and 11/8" width
• Made of super-strong Gates Carbon X3N material
• Made in the U.S.A.
PART #
DESCRIPTION
FOR 99-06 TWIN CAM (EXCEPTS 06 DYNA)
0925-0955
Inner silent chain, 16 link; repl. OEM
0925-0956
Outer silent chain, 22 link; repl. OEM
FOR 07-16 TWIN CAM (06 DYNA AND CONVERSION CAMSHAFTS)
0925-0953
Inner roller chain, 16 link; repl. OEM
0925-0954
Outer roller chain, 22 link; repl. OEM
FOR 00-16 SOFTAIL
Softail roller chain, B engine balance shaft, 48 link; repl.
0925-0952
OEM #14769-00
4
SUG. RETAIL
$
39.95
39.95
39.95
39.95
49.95
PART #
1204-0111
DESCRIPTION
139 Teeth, 11/8" wide
SUG. RETAIL
$
193.95
ROCKER COVER
ACCENTS
HANDLEBAR CLAMP SETS
0940-1395
• Designed to give the right side of the engine’s
rocker boxes a bold custom appearance without the
hassle of complete replacement covers
• CNC-machined from 6061 T-6 aluminum with a raw finish
• Installation utilizes high-strength adhesive that can
withstand temperatures up to 500° F and does not require rocker cover removal
• Clamp has tapped holes to
lock the handlebars
in place once installed (setscrews included)
• Rocker Cover Accents do not need to be removed
for top-end motor maintenance once installed
• Allow the use of a wide selection of handlebars
• Completes the look with other products in the
Bahn™ line
0940-1396
• Available with a chrome or Tuxedo (black with
machined accents) finish
PART #
DESCRIPTION
FOR 99-16 TWIN CAM ENIGINES
0940-1395
Tuxedo
0940-1396
Chrome
SUG. RETAIL
• Designed for aftermarket
handlebars where the
wire exit hole faces down
instead of forward; work with
both OEM and aftermarket
handlebars
• Made in the U.S.A.
$
169.95
169.95
PART #
DESCRIPTION
FOR 14-16 FLHR MODELS
For 1" handlebars
0602-0780
w/ 1" dia. clamping area
For 1¼" handlebars
0602-0781
w/ 1¼" dia. clamping area
For 1½" handlebars
0602-0779
w/ 1½" dia. clamping area
TAPPET BLOCK
ACCENT
0929-0057
• Effortlessly dress up the dead space between
stock tappet blocks
• Hassle-free installation and killer styling
make this precision-machined forged
aluminum piece a must-have
SUG. RETAIL
$
139.95
139.95
139.95
FUSION REAR MASTER CYLINDER COVERS
• The perfect complement to Bahn Rocker
cover accents, PART #’s 0940-1395
and 0940-1396
• Feature high-definition machining
• Completes the look with other products
in the Bahn™ line
• Made from the finest 6061 T-6 aluminum stock available
• Available with a chrome or Tuxedo (black with
machined accents) finish
PART #
DESCRIPTION
FOR 99-16 TWIN CAM ENGINES
0929-0057
Tuxedo
0929-0058
Chrome
0602-0781
SUG. RETAIL
$
0929-0058
139.99
139.99
• Available in Artistic Chrome, Laser Fusion (flat black
powdercoat with laser-etched accents) or Decadent Black
Powdercoat finish
• Artistic Chrome and Laser Fusion finishes highlight the
detailed machining work
• Black powdercoats
won’t fade like
anodized finishes
• Made in the U.S.A.
1731-0492
1611-0058
BRAKE PEDAL PADS
• Easy-to-install forged aluminum brake pedal pad
• Feature a premium rubber surface that helps
eliminate boot slippage on brake pad
• Completes the look with other products in the
Bahn™ line
1731-0493
• Available with a chrome or Tuxedo (black with
machined accents) finish
PART #
DESCRIPTION
SUG. RETAIL
FOR 80-16 FLHTC/​FLTR/​FLHR/​FLHX AND H-D FL
TRIKES; 86-16 FLST MODELS AND 12-16 FLD
$
64.99
1611-0058
Tuxedo
1611-0059
Chrome
64.99
1731-0494
1611-0059
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-16 BIG TWIN (ALL EXCEPT 08-16 DRESSER/
H-D FL TRIKE/​DYNA/XL)
$
54.95
1731-0492 Artistic Chrome
1731-0493 Decadent Black Powdercoat
54.95
1731-0494 Laser Fusion
54.95
5
THE DRAG SPECIALTIES
NOVEMBER 2015
NASH MOTORCYCLE COMPANY
We are very excited to welcome Nash Motorcycle Company to our Drag Specialties
family. The company is based out of Southern California and has been building in
popularity amongst the custom builder ranks with unique and exciting new products
like the sampling you see here. Watch for the full range of offerings from the crew at
Nash in the 2016 Fatbook.™.
1¼" PUDGY MIDGET GIMP
HANDLEBARS
• Give your bike that fatter look and feel
0601-3233
• Perfect for mounting to a stock springer front end
• Fit 1" applications
• These bars are lathed down in the center and both ends to allow use of standard 1" grips, controls and risers
0601-3235
• Dimpled, drilled and knurled
• Available in black or chrome finish
• Made in the U.S.A.
PART #
0601-3231
0601-3232
0601-3233
0601-3234
0601-3235
0601-3236
DESCRIPTION
Black
Chrome
Black
Chrome
Black
Chrome
END RISE
10"
10"
12"
12"
14"
14"
WIDTH
35"
35"
35"
35"
35"
35"
CENTER WIDTH
9"
9"
9"
9"
9"
9"
PULLBACK
5"
5"
5"
5"
5"
5"
SUG. RETAIL
$
364.95
409.95
364.95
409.95
364.95
409.95
1¼" PUDGY GIMP HANGERS
• Give your bike a fatter look and feel
• These bars are lathed down in the center and both ends to allow use of standard 1" grips, controls and risers
• Dimpled, drilled and knurled
• Available in a black or chrome finish
0601-3230
• Made in the U.S.A.
PART #
0601-3225
0601-3226
0601-3227
0601-3228
0601-3229
0601-3230
DESCRIPTION
Black
Chrome
Black
Chrome
Black
Chrome
END RISE
12"
12"
14"
14"
16"
16"
WIDTH
35"
35"
35"
35"
35"
35"
CENTER WIDTH
10.5"
10.5"
10.5"
10.5"
10.5"
10.5"
PULLBACK
5"
5"
5"
5"
5"
5"
SUG. RETAIL
$
364.95
409.95
364.95
409.95
364.95
409.95
1" PUNCHY HANDLEBARS
• The smaller version of the Looky Looky bars with an added crossbar for extra support
0601-3193
• Handlebars come knurled, dimpled and drilled
• Available in black or chrome finish
• Made in the U.S.A.
PART #
0601-3193
0601-3194
6
DESCRIPTION
Chrome
Black
SUG. RETAIL
$
254.95
209.95
0601-3194
1" CIGAR RACER
HANDLEBARS
1" MIDGET CIGAR RACER BARS
• Feature a unique BMX race-style
look along with a center crossbar,
which provides excellent strength
and support
• Smaller version of the Cigar Racer Bars
0601-3198
• Handelbars come dimpled,
drilled and knurled
DESCRIPTION
Chrome
Black
0601-3200
• Bars come dimpled,
drilled and knurled
• Made in the U.S.A.
PART #
0601-3197
0601-3198
• Feature a unique BMX race style look along
with a center crossbar, which provides
excellent strength and support
• Made in the U.S.A.
END
RISE
8"
8"
WIDTH
30"
30"
CENTER
SUG.
WIDTH PULLBACK RETAIL
$
249.95
10.5"
5"
10.5"
5"
204.95
PART #
0601-3199
0601-3200
DESCRIPTION
Chrome
Black
END
RISE
8"
8"
WIDTH
30"
30"
CENTER
WIDTH PULLBACK
9"
5"
9"
5"
SUG.
RETAIL
$
249.95
204.95
1” EL GRINGO BARS
0601-3195
• These bars are sure to give your bike
that one-of-a-kind look you want
• Come knurled, drilled and dimpled
• Made in the U.S.A.
NOTE: These bars are not made to be
internally wired.
0601-3196
PART #
0601-3195
0601-3196
DESCRIPTION
Chrome
Black
END RISE
4"
4"
WIDTH
29"
29"
CENTER WIDTH
10"
10"
PULLBACK
5"
5"
1" GIMP HANGER BARS
SUG. RETAIL
$
254.95
209.95
0601-3219
• Perfect for squaring up your front end
and giving your bike a unique look
• Made from steel tubing with reinforced
corners for added strength
• Fit pre 82 style handlebar controls; not dimpled or knurled
0601-3224
• Made in the U.S.A.
PART #
0601-3219
0601-3220
0601-3221
0601-3222
0601-3223
0601-3224
DESCRIPTION
Black
Chrome
Black
Chrome
Black
Chrome
END RISE
12"
12"
14"
14"
16"
16"
WIDTH
33"
33"
33"
33"
33"
33"
CENTER WIDTH
10.5"
10.5"
10.5"
10.5"
10.5"
10.5"
PULLBACK
5"
5"
5"
5"
5"
5"
SUG. RETAIL
$
199.95
244.95
199.95
244.95
199.95
244.95
7
THE DRAG SPECIALTIES
NOVEMBER 2015
1” SMART GIMPS
• These gimps go off the same shape and feel you get with Nash Motorcycle Company’s
traditional gimp hangers, but they have rounded corners like an original ape hanger
0601-3201
• Come dimpled, drilled and knurled
• Made in the U.S.A.
PART #
0601-3201
0601-3202
0601-3203
0601-3204
DESCRIPTION
Chrome
Black
Chrome
Black
END RISE
14"
14"
16"
16"
WITDH
35"
35"
35"
35"
CENTER WIDTH
11"
11"
11"
11"
PULLBACK
5"
5"
5"
5"
1" MIDGET GIMP HANDLEBARS
• These bars are perfect for squaring up your front end and giving your bike a unique look
SUG. RETAIL
$
224.95
184.95
224.95
184.95
0601-3191
• Fit narrow glide front ends
• Bars come dimpled, drilled and knurled
0601-3192
• Made in the U.S.A.
PART #
0601-3218
0601-3217
0601-3189
0601-3190
0601-3191
0601-3192
DESCRIPTION
Chrome
Black
Chrome
Black
Chrome
Black
END RISE
12"
12"
14"
14"
16"
16"
WIDTH
31"
31"
31"
31"
31"
31"
CENTER WIDTH
9"
9"
9"
9"
9"
9"
PULLBACK
5"
5"
5"
5"
5"
5"
SUG. RETAIL
$
244.95
199.95
244.95
199.95
244.95
199.95
1" LOOKY LOOKY BARS
0601-3207
• A vintage-looking replica of the infamous
Looky Looky bike handlebars
0601-3206
• Bars come dimpled, drilled and knurled
• Made in the U.S.A.
PART #
0601-3206
0601-3207
DESCRIPTION
Chrome
Black
END RISE
8"
8"
WIDTH
29"
29"
CENTER WIDTH
11.5"
11.5"
PULLBACK
5"
5"
SUG. RETAIL
$
224.95
189.95
1" WAYBACKS
1" DRAG BARS
• Nash Motorcycle Company’s interpretation of 70’s style pullbacks
• Racer-style Drag Bars with the look of the Gimp Hangers
• Come dimpled, drilled and knurled
• Constructed from tig-welded steel tubing
• Made in the U.S.A.
• Handlebars come dimpled, drilled and knurled
• Made in the U.S.A.
0601-3237
0601-3238
PART #
0601-3205
8
DESCRIPTION
Chrome
END RISE CENTER WIDTH
8"
11.5"
SUG. RETAIL
$
189.95
SUG.
PART #
DESCRIPTION PULLBACK RETAIL
$
0601-3237 Black
5"
184.95
0601-3238 Chrome
5"
224.95
FUEL SENDING UNITS
¾" REPLACEMENT
AXLES
• OEM replacement fuel sending units
• Fitted for OEM gas tanks
2212-0589
0214-0946
• Front axles feature a zinc-plated finish
• Made in the U.S.A.
0214-0950
• Rear axles feature chrome-plated heads
PART #
FRONT
0214-0946
0214-0947
0214-0948
0214-0945
PART #
2212-0588
2212-0589
2212-0590
DESCRIPTION
For 88-94 FXR
For 82-87 FXR
For 84-87 FLT
SUG. RETAIL
$
378.95
378.95
378.95
UTILITY MIRRORS WITH CLAMP-ON MOUNTS
SUG. RETAIL
For 84-99 FLT/​FLHT, 81-84 FLH; repl.
OEM #43346-83A
For 73-80 FL, 80-83 FXWG; repl. OEM
#43875-73
For 79-81 FLT; repl. OEM #43937-79
For 86-06 FLST/C/F/N; repl. OEM
#41584-86A
$
40.95
40.95
40.95
40.95
REAR
0214-0950
0214-0949
For 67-72 FLH, 71-72 FX; repl. OEM
#41552-67
For 66 FLH; repl. OEM #41552-58A
0640-0990
40.95
40.95
0640-0986
PERCH MOUNT UTILITY
MIRRORS
• Die-cast aluminum construction with stainless-steelball joint mounting hardware
• Precision die-cast aluminum
constructioan with stainless-steel ball joint mounting hardware
• Tempered glass mirrors available in 3.75" round or 2.5" x 4" rectangular shape
• Tempered glass mirrors available in
3.75" round or 2.5" x 4" rectangular shape
• Chrome or black powder-coat finish
• Include CNC-machined
6061 T6 aluminum 7/8" or
1" I.D. P-clamps for mounting
on handlebars
• Threaded mirror stalk base accepts 5/16-18
stainless steel button cap Allen bolt for easy mounting
• Sold each or in pairs
• Clever ball joint assembly
inside the mirror perch can
be reversed for right-side
mounting
• Sold each
DESCRIPTION
0640-0993
0640-1001
PART #
ROUND
0640-0994
0640-0995
0640-0990
0640-0991
RECTANGULAR
0640-0996
0640-0997
0640-0992
0640-0993
DESCRIPTION
Black for 7/8" bars
Chrome for 7/8" bars
Black for 1" bars
Chrome for 1" bars
Black for 7/8" bars
Chrome for 7/8" bars
Black for 1" bars
Chrome for 1" bars
SUG. RETAIL
$
89.95
89.95
89.95
89.95
89.95
89.95
89.95
89.95
PART #
ROUND
0640-0986
0640-0987
0640-0998
0640-0999
RECTANGULAR
0640-0988
0640-0989
0640-1000
0640-1001
COLOR
SUG. RETAIL
Black (ea.)
Chrome (ea.)
Black (pr.)
Chrome (pr.)
69.95
69.95
139.95
139.95
Black (ea.)
Chrome (ea.)
Black (pr.)
Chrome (pr.)
69.95
69.95
139.95
139.95
$
9
THE DRAG SPECIALTIES
NOVEMBER 2015
LOWBROW CUSTOMS
CLASSIC GRIPS
Lowbrow points out that their team is a physical manifestation of chopper
fever and passion for all things motorcycle. Based out of northeast Ohio,
these folks have quickly become a premiere source for hot new custom
and chopper parts. You will continue to find all of their latest offerings, like
those you see here, through Drag Specialties. Including the upcoming 2016
FatBook™ catalog. Keep watching.
• Feature a timeless design that
looks at home on vintage and
modern bikes alike
• Made of co-molded Krayton
rubber which forms a comfortable
radius that fits like a glove while
providing solid form and function
0630-1735
• Available in a variety of colors for 1" and 7/8" handlebars
0630-1737
0630-1741
0630-1743
0630-1745
0630-1747
0630-1749
FLYING MONKEY 1" GRIPS
• Feature co-molded krayton rubber, forming a comfortable radius
that fits like a glove while providing solid form and function
• Available in a variety of colors for 1” handlebars
• Made in the U.S.A.
0630-1727
0630-1729
0630-1731
PART #
0630-1727
0630-1729
0630-1731
0630-1733
10
0630-1733
DESCRIPTION
Black/​white
Black/​orange
Red/​orange
Blue/​gray
SUG. RETAIL
$
27.95
27.95
27.95
27.95
PART #
DESCRIPTION
FOR 1" HANDLEBARS
0630-1735
Black
0630-1737
White
0630-1741
Red
0630-1743
Metalflake black
0630-1745
Metalflake red
0630-1747
Metalflake silver
0630-1749
Metalflake blue
FOR 7/8" HANDLEBARS
0630-1738
White
SUG. RETAIL
19.95
19.95
19.95
22.95
22.95
22.95
22.95
$
19.95
MASTER CYLINDER
COVERS
AIR CLEANER
COVERS
• Available in semi-polished or black
electroplate aluminum, with a finned
or fish scale design
• Fit S&S, Super E or G carburetors with the stock
backing plate and air filter element
• Made from cast aluminum
• Easy to install
• Mount with stock hardware
• Come in finned, fishscale or smooth pattern
• Available in a polished aluminum or black finish
1014-0233
• Utilize your
stock gasket
and hardware
0611-0087
0611-0090
0611-0093
1014-0236
0611-0092
1014-0231
PART #
DESCRIPTION
POLISHED CHROME
1014-0231
Finned
1014-0233
Scales
1014-0235
Smooth
BLACK
1014-0232
Finned
1014-0234
Scales
1014-0236
Smooth
RADIAL FINNED
REAR MASTER
CYLINDER COVERS
SUG. RETAIL
$
134.95
134.95
134.95
134.95
134.95
134.95
1731-0496
• Available in semi-polished or black elecroplate
aluminum, with a finned design
• Utilize your stock gasket and
hardware
• Easy to install
1731-0497
PART #
DESCRIPTION
FOR 04-13 XL MODELS
1731-0496
Semi-polished
1731-0497
Black
REAR BUMPER FOR TRI GLIDE
0611-0095
SUG. RETAIL
$
44.95
44.95
FRONT BRAKE MASTER CYLINDER
PART #
DESCRIPTION
SUG. RETAIL
FOR 85-95 H-D MODELS
$
0611-0087
Semi-polished, finned
44.95
0611-0088
Black, finned
44.95
0611-0089
Semi-polished, fish scale
44.95
0611-0090
Black, fish scale
44.95
FOR 96-16 BIG TWIN AND 96-03 XL MODELS (EXCEPT 15-16 SOFTAIL, 08-16
DRESSERS AND H-D FL TRIKE)
0611-0091
Semi-polished, finned
44.95
0611-0092
Black, finned
44.95
0611-0093
Semi-polished, fish scale
44.95
0611-0094
Black, fish scale
44.95
FOR 04-16 XL MODELS
0611-0095
Semi-polished, finned
44.95
0611-0096
Black, finned
44.95
REAR BRAKE MASTER CYLINDER
PART #
DESCRIPTION
SUG. RETAIL
FOR 87-99 FLST/XL AND 91-05 FXD/​F XDWG MODELS
0611-0087
Semi-polished, finned
0611-0088
Black, finned
0611-0089
Semi-polished, fish scale
0611-0090
Black, fish scale
$
44.95
44.95
44.95
44.95
0530-1327
• Rear bumper features triple chrome plated steel construction
2010-1249
• Easy bolt-on design
• LED tail and brake light set features extremely bright LED that provides additional safety
• Each light contains 16 LEDs in triple chrome plated waterproof housings, with polished stainless steel brackets
• Includes wiring and easy to follow instructions
• Bolts to provided holes on Rivco tri-glide bumper
• Factory bumper requires drilling to install LED light set
• Bumper and light set sold separately
PART #
DESCRIPTION
FOR 09-16 FLHTCUTG/​FLHXXX MODELS
0530-1327
Rear bumper
2010-1249
LED tail and brake light set
SUG. RETAIL
$
219.95
129.95
11
THE DRAG SPECIALTIES
NOVEMBER 2015
MONKEY
GUARDS
FRENCHIE BOX LED LIGHT BOX
• Continue that
killer monkey
look with monkey
engine guards
0505-1373
• The Frenchie Box lets you mount a Paul Yaffe
LED to to virtually any surface: flat,radius,
convex and more
• Extra-deep lip to accommodate the thickest
materials or sharpest bends and curves
• Available in either
black or chrome
• Provide a clean, professional frenched look with minimal effort
• Match Paul Yaffe EZ LED Taillights; sold separately
• Sold in pairs
0505-1372
• Made in the U.S.A.
PART #
DESCRIPTION
FOR 09-16 FLHT/​FLHR/​FLTR/​FLHX (EXCEPT H-D FL TRIKE)
0505-1374
Black
0505-1375
Chrome
FOR 97-08 FLHT/​FLHR/​FLTR/​FLHX (EXCEPT H-D FL TRIKE)
0505-1372
Black
0505-1373
Chrome
SUG. RETAIL
$
449.95
449.95
449.95
449.95
2040-1792
PART #
2040-1792
2040-1793
2040-1793
DESCRIPTION
Middle Finger Frenchie Box (use
w/ Middle Finger LEDs)
Snake Eye Frenchie Box (use
w/ Snake Eye LEDs)
SUG. RETAIL
$
119.95
119.95
FRONT FENDER KITS
Y-AXLES
• A new twist on the flush-mount front axle
• Stamped from 16-gauge U.S. steel
• End caps are CNC-machined from 6061 T-6 billet aluminum
• Raw finish
• Brilliant chrome or black anodized finishes available
• Multiple styles to choose from
• Come complete with chrome or black fender
adapters and mounting hardware
• Made in the U.S.A.
• Available for 21", 23" or 26" wheels
1401-0510
• Fenders measure 6" wide;
fit most 130/60-series tires
0214-0936
• Made in the U.S.A.
0214-0940
0214-0939
0214-0942
1401-0513
PART #
DESCRIPTION
SUG. RETAIL
FOR 08-16 FLHT/​FLHR/​FLTR/​FLHX (EXCEPT H-D FL TRIKES) (25MM)
$
149.95
0214-0940
Speed Freak, anodized black
0214-0941
Speed Freak, chrome
149.95
0214-0942
Smooth, anodized black
149.95
0214-0943
Yafterburner, anodized black
149.95
0214-0944
Yafterburner, chrome
149.95
FOR 00-07 FLT/​FLHR/​FLHR/​FLTR/​FLHX (1”)
0214-0935
Speed Freak, anodized black
149.95
0214-0936
Speed Freak, chrome
149.95
0214-0937
Smooth, anodized black
149.95
0214-0938
Yafterburner, anodized black
149.95
0214-0939
Yafterburner, chrome
149.95
12
9901-1677
PART #
DESCRIPTION
SUG. RETAIL
FOR 14-16 FLHT/​FLTRX/​FLHR/​FLHX
$
1401-0510
21" Fender kit w/ chrome brackets
399.95
1401-0511
21" Fender kit w/ black brackets
399.95
1401-0512
23" Phantom Fender kit w/ chrome brackets
439.95
1401-0513
23" Phantom Fender kit w/ black brackets
439.95
1401-0514
26" Fender kit w/ chrome brackets
549.95
1401-0515
26" Fender kit w/ black brackets
549.95