Cree XLamp XM-L LED Data Sheet

Transcription

CLD-DS33 Rev 11D
Product family data sheet
Cree® XLamp® XM-L LEDs
Product Description
FEATURES
Table of Contents
The XLamp® XM-L LED is the industry’s
• Maximum drive current: 3000 mA
Characteristics........................................ 2
highest performance, single‑die white
• Low thermal resistance: 2.5 °C/W
Flux Characteristics................................ 3
lighting‑class LED. The XLamp XM-L LED
• Maximum junction temperature:
Relative Spectral Power Distribution..... 4
is 20% more efficient than the XLamp
150 °C
XP-G LED at the same current, and can
• Viewing angle: 125°
Temperature............................................ 4
deliver 1000 lumens with 100 lumens per
• Available in cool white, 80‑CRI
Electrical Characteristics........................ 5
watt efficacy. The XLamp XM-L LED offers
minimum neutral white and 80‑CRI,
Relative Flux vs. Current......................... 5
Cree’s industry-leading features: wide
85‑CRI and 90‑CRI warm white
Relative Chromaticity vs. Current (Cool
viewing angle, symmetrical package,
• ANSI‑compatible chromaticity bins
White)....................................................... 6
unlimited floor life and electrically neutral
• Unlimited floor life at
Relative Chromaticity vs. Temperature
thermal path.
≤ 30 ºC/85% RH
• Reflow solderable - JEDEC
XLamp XM-L LEDs can enable LED light
J‑STD‑020C
(Cool White)............................................. 6
Relative Chromaticity vs. Current
(Warm White).......................................... 7
into new applications that require tens
• Electrically neutral thermal path
Relative Chromaticity vs. Temperature
of thousands of lumens, such as high
• RoHS and REACh compliant
(Warm White).......................................... 7
bay and high-output area lighting. The
• UL® recognized component
Typical Spatial Distribution..................... 8
XM-L is also the ideal choice for lighting
(E349212)
Thermal Design....................................... 8
applications where high light output and
Reflow Soldering Characteristics........... 9
maximum efficacy are required, such as
Notes..................................................... 10
LED light bulbs, outdoor lighting, portable
Mechanical Dimensions....................... 12
lighting,
Tape and Reel........................................ 13
indoor
powered lighting.
www.cree.com/Xlamp
Relative Flux vs. Junction
lighting
and
solar-
Packaging.............................................. 14
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp ® XM-L LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
2.5
degrees
125
mV/°C
-2.1
Viewing angle (FWHM)
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
mA
3000
Reverse voltage
V
5
Forward voltage (@ 700 mA)
V
2.9
V
3.1
V
3.35
LED junction temperature
°C
DC forward current
3.5
150
Copyright © 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® XM-L LED
Flux Characteristics (TJ = 25 °C)
The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here
are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the ordercode nomenclature, please consult the XLamp XM-L LED Binning and Labeling document.
Color
CCT Range
Min.
Cool White
5000 K
Max.
8300 K
Neutral White
3700 K
5000 K
80-CRI White
2600 K
4300 K
Warm White
2600 K
3700 K
85-CRI White
90-CRI White
2600 K
2600 K
3200 K
3200 K
Minimum Luminous Flux @
700 mA
Calculated Minimum
Luminous Flux (lm)*
Order Code
Group
Flux (lm)
1000 mA
1500 mA
2000 mA
T5
260
360
511
643
XMLAWT-00-0000-0000T5051
T6
280
388
551
692
XMLAWT-00-0000-0000T6051
U2
300
416
590
742
XMLAWT-00-0000-0000U2051
T4
240
332
472
593
XMLAWT-00-0000-000LT40E4
T5
260
360
511
643
XMLAWT-00-0000-000LT50E4
T2
200
277
393
494
XMLAWT-00-0000-000HT20E7
T3
220
305
433
544
XMLAWT-00-0000-000HT30F7
T2
200
277
393
494
XMLAWT-00-0000-000LT20E7
T3
220
305
433
544
XMLAWT-00-0000-000LT30F7
S4
164
227
323
406
XMLAWT-00-0000-000PS40E7
S5
172
238
338
425
XMLAWT-00-0000-000PS50E7
S6
182
252
358
450
XMLAWT-00-0000-000PS60E7
S4
164
227
323
406
XMLAWT-00-0000-000US40E7
S5
172
238
338
425
XMLAWT-00-0000-000US50E7
S6
182
252
358
450
XMLAWT-00-0000-000US60E7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 10).
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 65.
• Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75.
• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.
• Minimum CRI for 80-CRI White is 80.
• Minimum CRI for 85-CRI White is 85.
• Minimum CRI for 90-CRI White is 90
* Calculated flux values are for reference only.
3
XLamp ® XM-L LED
Relative Spectral Power Distribution
Relative Radiant Power (%)
100
80
60
5000 K - 8300 K CCT
3700 K - 5000 K CCT
2600 K - 3700 K CCT
40
20
0
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux vs. Junction Temperature (IF = 700 mA)
100%
90%
Relative Luminous Flux
80%
70%
60%
50%
40%
30%
20%
10%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
4
XLamp ® XM-L LED
Electrical
Characteristics (Tj =(T25ºC)
Electrical
Characteristics
= 25 °C)
J
3000
2800
2600
Forward Current (mA)
2400
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 25ºC)
Relative Flux vs. Current (TJ = 25 °C)
350%
325%
Relative Luminous Flux
300%
275%
250%
225%
200%
175%
150%
125%
100%
75%
50%
25%
0%
0
200
400
600
800
1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Forward Current (mA)
5
XLamp ® XM-L LED
Relative Chromaticity vs. Current (Cool White)
Cool White
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
500
1000
1500
2000
2500
3000
Current (mA)
Relative Chromaticity vs. Temperature (Cool White)
Cool White
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25
50
75
100
125
150
Tsp (°C)
6
XLamp ® XM-L LED
Relative Chromaticity vs. Current (Warm White)
Warm White
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
500
1000
1500
2000
2500
3000
Current (mA)
Warm White vs. Temperature (Warm White)
Relative Chromaticity
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25
50
75
100
125
150
Tsp (°C)
7
XLamp ® XM-L LED
Typical Spatial Distribution
100%
Relative Luminous Intensity
80%
60%
40%
20%
-100
-80
-60
-40
-20
0%
0
20
40
60
80
100
Angle (º)
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
Thermal
Design
and optical characteristics.
3500
Maximum Current (mA)
3000
2500
2000
1500
Rj-a = 4 °C/W
1000
Rj-a = 7 °C/W
Rj-a = 10 °C/W
500
Rj-a = 15 °C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
8
XLamp ® XM-L LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
9
XLamp ® XM-L LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
10
XLamp ® XM-L LED
Notes - Continued
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer
to the LED Eye Safety application note.
11
XLamp ® XM-L LED
Mechanical Dimensions
6
5
4
NOTICE
6
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
NOTICE
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO
ANY
CONTAINED
WITHIN ARE THE PROPRIETARY AND
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN
CONSENT INFORMATION OF CREE, INC. THIS PLOT
CONFIDENTIAL
OF CREE INC.
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
3
5
2
4
Thermal vias, if present, are not shown on these drawings.
1
REVISONS
3
REV
DESCRIPTION
A
NEW RELEASE
B
Added die outline
REV
A
B
All measurements are ±.13 mm
unless otherwise
indicated.
D
3.02 WAS 3.09
C
ADDED DIMENSION FOR TOP OF FLASH
E
D
D
G
CHANGED SOLDERPAD AND STENCIL
.50
0.73
5.00
.50
4/15/10
10/22/1
DC
11/18/10
NE
G
CHANGED SOLD
E
4.78
3.78
2.78
3.02
5.00
DC
DDS
F
D
CORRECTED DOME RADIUS
DATE
Ad
1/5/11
DC
ADDED DIMENSI
10/23/1
DC
3.
11/15/1
DC
ADDED
6/16/15
DC
CORRECTE
C
ADDED DOME RADIUS
F
4.78
3.78
3.02
2
BY
2.78
.50
0.73
.50
5.00
4.78
5.00
C
C
R2.26
Top View
Side View
Bottom View
R2.26
4.78
4.78
.50
.50
.80
.50
.50
.50
.50
.80
.25
.25
.80
.80
B
B
4.78
4.78
4.78
4.78
.25
.25
.97
2.78
4.78
2.78
Recommended PCB
A
RECOMMENDED STENCIL PATTERN
(HATCHED
Solder
PadAREA IS OPENING)
A
RECOMMENDED PCB
SOLDER PAD
RECOMMENDED PCB SOLDER PAD
.97
ALL DIMENSIONS ARE
4.78
± .13MM UNLESS OTHERWISE NOTED
ALL DIMENSIONS ARE
Recommended Stencil Pattern
(Shaded Area Is Open)
DRAWN BY
UNLESS OTHERWISE SPECIFIED
D. CRONIN
DIMENSIONS ARE IN
RECOMMENDED STENCIL
PATTERN
CHECK
MILLIMETERS AND AFTER FINISH.
(HATCHED AREA IS OPENING)
-TOLERANCE UNLESS SPECIFIED:
.XX
±
.25
APPROVED
.XXX ±
.125
-X°
±
.5 °
THIRD ANGLE PROJECTION
MATERIAL
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX
±
.75
.XXX ±
.25
FINAL PROTECTIVE FINISH
X°
±
.5 °
--
SURFACE FINISH:
6
5
6
4
5
--
1.6
3
4
2
± .13MM UNLES
DATE
04/9/10
DRAWN BY
DATE
-DIMENSIONS ARE IN
DATE MILLIMETERS AND AFTER FINISH.
TITLE
TOLERANCE
UNLESS SPECIFIED:
-.XX
±
.25
.XXX ±
.125
X°
±
.5 °
D. CRONIN
460
Du
Pho
Fax
CHECK
--
OUTLINE DRAWING, 5050
SIZE
C
SURFACE FINISH:
APPROVED
--
DRAWING NO.
.X
±
1.5
.XX
±
.75
SCALE
.XXX
.25
16.000±
X°
±
.5 °
1.6
3
MATERIAL
2610-0000
--
SHE
1
-2
12
6
5
4
3
2.00[.079]
4.00[.157]
1
2
REVISIONS
NOTICE
EE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
NTAINED WITHIN ARE THE PROPRIETARY AND
NFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
Y NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
AUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
CREE INC.
DESCRIPTION
REV
BY
DATE
APP'D
POCKET SIZE
+.10
+.0039
.0591
-.00
-.0000 [ ]
Do1.50
P2
1.75[.069]
E1
Po
Ao -
5.40mm [.213"]
Bo -
5.40mm [.213"]
Ko -
3.35mm [.132"]
Tape and Reel
3.0°
XLamp ® XM-L LED
D
5.40[.213]
Bo
3
12.00[.472] Component Handling Systems Standard.
All Cree carrier tapes conform to EIA-481D,
Automated
6
5
4
5.50[.217]F
6
5
4
NOMINAL
C
NOTICE
CREE CONFIDENTIAL. THIS PLOT
AND THE INFORMATION
NOTICE
CONTAINED
WITHIN ARE THETHIS
PROPRIETARY
ANDINFORMATION
CREE CONFIDENTIAL.
PLOT AND THE
CONFIDENTIAL
INFORMATION
CREE,
INC. THIS PLOT
CONTAINED
WITHIN AREOF
THE
PROPRIETARY
AND
MAY NOT
BE COPIED, INFORMATION
REPRODUCEDOF
ORCREE,
DISCLOSED
TO PLOT
ANY
CONFIDENTIAL
INC. THIS
UNAUTHORIZED
PERSON
WITHOUT
THE WRITTEN
CONSENT
MAY NOT BE COPIED, REPRODUCED
OR DISCLOSED
TO ANY
OF CREE
INC.
UNAUTHORIZED
PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
D
D
REV
12.30 [.484]
MAX
W
10.25
[.404]
E2
2.00[.079]
2.00[.079]
P2
1.50[.059]
4.00[.157]
D1
4.00[.157]
Po
8.00[.315]
P
2
3
REVISIONS
REVISIONS
DESCRIPTION
DESCRIPTION
6
5
C
NOTICE
NTIAL. THIS PLOT AND THE INFORMATION
THIN ARE THE PROPRIETARY AND
INFORMATION OF CREE, INC. THIS PLOT
OPIED, REPRODUCED OR DISCLOSED TO ANY
D PERSON WITHOUTTHE WRITTEN CONSENT
5.40[.213]
4
3.0°
A
B
Ao
B
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
.X
±
.06
.XX ±
.03
.XXX ±
.010
X°
±
.5 °
SURFACE FINISH:
5
4
8
6
1
C
BY
DATE
DDS
11/8/10
DC
2/26/12
BS
8.00[.315]
DATE
8.00[.315]
P TITLE
P
APPROVED
SIZE
A
Loaded Pockets
(1000 Lamps)
A
User Feed Direction
REV.
DRAWING NO.
2402-00011
7.0°
SCALE
DRAWING SCALE
2
SHEET
7.0°
1
A
OF
4
1.75
3.35[.132]
3.35[.132]
3
Ko
Ko
START
12
.36[.014] D
T .36[.014]
T
A
XM 5050 CARRIER TAPE
MATERIAL
5.40[.213]
5.40[.213]
Ao
ANODE SIDE
1.50[.059]
Phone (919) 313-5300
Fax (919) 313-5558
D1 1.50[.059]
D1
B
3.35
2
1
2400-00009
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
INDEX
QTY
ITEM
1
1
2400-00009-CORE
DRAWN BY
COMMENTS
DATE
DATE
4/23/10
2 D. CRONIN
2DRAWN BY2400-00009-REEL
UNLESS ARE
OTHERWISE
SPECIFIED
DIMENSIONS
IN INCHES
D. CRONIN
4/23/10
DATE
DIMENSIONS
ARE IN INCHESCHECK
AND
AFTER FINISH.
CHECK
DATE
AND
AFTERSPECIFIED:
FINISH.
TOLERANCE
UNLESS
TOLERANCE
.XX ± UNLESS
.01 SPECIFIED:
APPROVED
DATE
TITLE
.XX
±
.01
.XXX ±
.005
APPROVED
DATE
TITLE
X°
±.XXX .5± ° .005
MATERIAL
X° PARTS
±
.5
°
FOR SHEET METAL
ONLY
Leader
MATERIAL
FOR.XSHEET
± METAL
.06 PARTS ONLY
DRAWING NO.
400mm (min.) of
SIZE
.XX .X
±
±.03 .06
DRAWING NO.
SIZE
±
.03
empty pockets with
.XXX .XX
±
.010
X°
±.XXX .5± ° .010
at least 100mm
SCALE
X°
±
.5 °
SURFACE FINISH: 63
SCALE
sealed by tape
DRAWING
SCALE
SURFACE FINISH: 63
DRAWING SCALE
Ao
C
4600 Silicon Drive
Durham,
N.C
27703
4600
Silicon
Drive
Durham,
N.C 27703
Phone (919)
313-5300
Phone
(919) 313-5300
Fax (919)
313-5558
Fax (919) 313-5558
XMXM
5050
CARRIER
TAPE
5050
CARRIER
TAPE
2402-00011
A
2402-00011 A
6
(405 empty pockets min.)
4
5
3
4
2
3
A
REV.
A
6
SHEET
OF
SHEET
1
2
1OF / 1
1
D
REV.
A
1 /1
12.4
+.2
.0
MEASURED AT HUB
C
C
330
+.25
-.75
16.4
+0.2
.0
MEASURED AT HUB
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
SURFACE FINISH:
5
4
1.6
3
1.9±.4
DATE
DRAWN BY
D. CRONIN
CHECK
21 ±.4
4600 Silicon Drive
Durham, N.C 27703
06/08/10
DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
APPROVED
--
--
MATERIAL
TITLE
13.1 ±.2
--
SIZE
--
SCALE
XM LOADING SPEC
REV.
DRAWING NO.
C
2402-00012
SHEET
3.000
2
B
OF
B
1 /1
1
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
REVISONS
REV
DESCRIPTION
BY
DATE
APP'D
DRAWN BY
A
B
1 /1
B
B
C
APP'D
4600 Silicon Drive
Durham, N.C 27703
4/23/10
DATE
CATHODE SIDE
4
5
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
D. CRONIN
CHECK
3
A
6
D
DATE
DRAWN BY
63
NOTICE
CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
D
D
B
END
2
APP'D
DATE
APP'D
5.40[.213]
5.40[.213]
Bo
Bo
3.0°
12.00[.472]
12.00[.472]
NOMINAL
NOMINAL
REVISONS
[.484]
10.25 12.30DESCRIPTION
12.30
[.484]
MAX
Loaded pocket
count was 750
[.404]10.25
MAX
[.404]
WANODE
E2
MADE CATHODE AND
W NOTE LARGER
E2
REV
3.35[.132]
Ko
6
5.50[.217]F
5.50[.217]F
3
C
BY
DATE
BoBo
- - 5.40mm
[.213"]
5.40mm
[.213"]
KoKo
- - 3.35mm
[.132"]
3.35mm
[.132"]
B
7.0°
BY
POCKET
SIZE
POCKET
SIZE
AoAo
- - 5.40mm
[.213"]
5.40mm [.213"]
1.75[.069]
E1 1.75[.069]
E1
.36[.014]
T
Po
1
All dimensions in mm.
REV
+.10
+.0039
Do1.50
.0591
+.0039
-.00 +.10 .0591
-.0000
[]
Do1.50
-.00
-.0000 [ ]
P2
1
2
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
D. CRONIN
CHECK
DATE
4600 Silicon Drive
Durham, N.C 27703
09/29/09
13
DATE
-APPROVED
-MATERIAL
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
--
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
A
XLamp ® XM-L LED
Packaging
Humidity Indicator
Card (inside bag)
Dessicant
(inside bag)
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Quantity, Reel ID, PO #
Quantity, Reel ID
Label with Custo
Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Quantity, Reel ID
Patent Label
14

Cree XLamp XM-L LED Data Sheet

Transcription

Similar documents

Data Sheet

Cree XLamp XT-E LED Data Sheet

Cree XLamp CXA1304 LED Data Sheet