COGNOR Blachy Dachowe

Transcription

COGNOR
product’s catalogue
ROOFING SHEETS
Together reach more
Roofing sheets Kinga
....................
Panel roofing sheets
.....................
Elevation panels
.........................
Trapezoid sheet
.........................
T-7
.....................................
T-12
....................................
T-18 New
................................
T-35 New
................................
Klikfelc
..................................
Window sills
.............................
Profiles
.................................
Sheet working
..........................
Gutters
.................................
Tapes and steel sheets
..................
Services
................................
Accessories for the roof assembly
.......
Colours
.................................
Złomrex Group Products
.................
Fence system
...........................
COGNOR Blachy Dachowe SA
ul. Węgierska 144 H/B, 33-300 Nowy Sącz, POLAND
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl
4
5
5
6
7
7
8
8
9
9
10
11
12
13
13
14
14
15
15
ENVIRONMENTALLY-FRIENDLY TECHNOLOGY
Dear Sir/Madam,
Increasing expectations of Clients generate among manufacturers a need for a constant development. Therefore the year 2009
is an important date in the development of our company. A company existing from 1996 under the name of Florian Podkarpacie
S.A. has become a part of CONOR Capital Group. A COGNOR distributional branch has become a new, international corporation in the steel branch. As a part of this corporation our company has assumed the name of COGNOR Blachy Dachowe S.A.
The COGNOR Group’s slogan is “Together reach more”, based on a conviction that with You we could develop and intensify our
co-operation, which allows us to strengthen our companies and achieve a stable position on the market.
The new brand COGNOR Blachy Dachowe S.A. continues all the previous traditions and good practices of the company Florian
Podkarpacie S.A. We will still take care of the improvement of the quality of our services thanks to which we will all achieve
further successes.
Our mission is to become a preferred supplier of high standard products and services as well as provide such a client’s service
that will guarantee that the client chooses a proper product in a proper price, quantity and quality. An expression and an effect
of such a strategy are supposed to be constituted by our client’s satisfaction and trust for our products and services. Therefore
we face our client by the provision of:
C
O
G
N
O
R
– competitive prices
– broad assortment offer
– guarantee of the highest quality
– reliability of our products
– high level client’s service
– diversity of colours and patterns
Since the year 1996 our company has manufactured roof coverings from galvanized steel sheets and organically coated
sheets, which still gain an increasing appreciation and are frequently chosen among individual clients and investors.
Every product offered by COGNOR Blachy Dachowe S.A. company is created individually for the needs of a specified order.
Our company does not limit its services only to the delivery of the ordered products. Its specialists advise on an optimal construction solution and propose appropriate products. Apart from the standard products offered in the permanent offer, upon
a client’s demand, COGNOR Blachy Dachowe S.A. company manufactures different types of non-standard elements, which
guarantee an aesthetic and functional finish of objects. It is possible thanks to the application of the newest technologies and
devices as well as the best resources.
Our products have appropriate technical and hygienic attests as well as meet quality requirements posed for construction products – it is guaranteed by the Quality Management System PN/EN ISO 9001:2008.
Feel invited to make use of our products.
Product’s catalogue
roofing sheets • panels
Kinga
roofing sheet
Kinga PLUS
Roofing sheet KINGA Plus is “The Queen of Polish Roofs”. It is an elegant and durable
roof covering suitable for any type of steep roofs. Combining tradition with modern technology it is applied in the construction of single-family and multi-family houses, warehouse buildings, sacred places and renovation of old buildings.
It is one of the most modern products among steel roof coverings. KINGA Plus is undoubtedly one of the best and most economic roof coverings.
It combines aesthetic look, durability and low costs of roof construction. During its design
there were used the best patterns of the original product and the design was enriched
with the details pointed by users and roofers. It enjoys a great interest of clients among
products offered by COGNOR Blachy Dachowe S.A.
KINGA Plus roofing sheet is the best quality roofing sheet distinguished by the easiness
of assembly and a low weight in comparison to other roof coverings.
The application of Kinga Plus roofing sheet guarantees that the roof is made in accordance to the best standards with the use of the most modern technologies. It provides an amazing and unique look of the roof for long years and
a certainty of the best choice.
COGNOR Blachy Dachowe S.A. company offers KINGA Plus roofing sheets along with the indispensible accessories: screws, ridge tiles and other
sheet workings, sealing tapes, mortar paints and flat sheets for non-typical roof workings.
detail
szczegół
24
4
A
1120
1190
Two capillary grooves protect against the leakage
on the sheet joints.
detail
A
module length
350 mm
overpress height
24 mm
sheet thickness
0,5 mm
effective covering width
1120 mm
total width
1190 mm
max. length
6m
weight 1 m2
approx. 5kg/m2
min. roof slope
guarantee period (written)
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl
9O
10 years
www.cognor.pl
Roofing sheet
panel
16,5
roofing sheet
1160
1214
In the case of panel roofing sheet, small dimensions of a single module and the symmetries of a roof wave allow for obtaining of a high effectiveness of
the material use. It results in the minimization of waste materials: with an appropriately planned covering, the waste material does not surpass 5%.
An unquestionable advantage of this system is constituted by the weight. Such a covering does not require high rafter’s intersections and dense
spacing as in the case of the ceramic roofing sheet. Thanks to its dimensions, the panel roofing sheet is not prone to bends and scratches as in the
case of traditional roofing sheets. The use of the panel system does not require an exact roof measurement.
Irreversible PROFILE
module length
350 mm
sheet thickness
0,5 mm
total panel width
1214 mm
panel covering width
1160 mm
number of panels necessary to cover 1m2
2,46 panels
weight 1 m2
approx. 5kg/m2
min. roof slope
14O
10 years
Available in the following coatings: polyester gloss and mat as well as alugalvanized and galvanized.
elevation
panels
An elevation panel is a wall lining of protective and decorative functions. It is applied in residential apartments, industrial objects, halls, warehouses
and supermarkets. A simple shape enables a quick assembly and creates a possibility to heat the building with thermal insulation. The elevation panel
is easily subject to working. A rich range of colours of the offered panels allows for an operation of a visual effect and creation of the elevation of an
individual character.
320
352
A
5
15
detail
14,5
A
10,5 10
15
panel height
15 mm
panel width
330 mm
panel covering width
320 mm
recommended length
max 8 m
sheet thickness
0,5 mm
10 years
Available in the following coatings: polyester gloss and mat as well as alugalvanized and galvanized.
Panels
5
6
trapezoid sheets
Roofing sheets
Trapezoid
sheets
A trapezoid sheet is unique thanks to its simplicity and clear form. It allows for
an execution of effective constructions which often break a division into the
roof and façades. It is particularly favoured by the real estate owners, architects, constructors of industrial and public objects. A possibility to cut it to the
required dimensions and a rich range of colours create unlimited possibilities
of its application. Trapezoid sheets are characterized by high resistance to
loads, therefore the roof does not require a complicated bearing construction.
It results in a simple assembly and lowered costs.
JUXTAPOSITION OF TRAPEZOID SHEETS
profile height [mm]
sheet thickness [mm]
T-7
T-12
T-18 NEW
T-35 NEW
7
12
18
35
0,5
0,5 - 0,75
0,5 - 0,75
0,5 - 0,75
recommended length [m]
max 6
max 8
max 8
max 10
covering width [mm]
1134
1040
1100
1015
1014
total width [mm]
1160
1120
1133
1072
1044
roof
profile
elevation
profile
The values given above refer to profiles made of a tape of the width of 1250 mm.
Layers
SHEET INTERSECTION
protective foil
decorative lacquer
ground coat lacquer
conversion layer
galvanized layer
steel sheet
galvanized layer
conversion layer
ground coat lacquer
protective lacquer
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl
www.cognor.pl
T-7
trapezoid sheet T-7
ELEVATION PROFILE
profile height [mm]
7
13x87=1134
87
1160
covering width [mm]
1134
10
20
0,5
total width [mm]
10
7
15
1160
max 6
Available in the following coatings: polyester gloss and mat
as well as alugalvanized and galvanized.
Trapezoid sheet T-7 (underlay) is recommended for elevation linings, ceiling finish and garage
door. It provides an effective look both inside and outside the building. Purchase of sheet of
a required length and in a rich range of colours creates an opportunity to select the sheet in
accordance to the client’s specified requirements.
T-12
trapezoid sheet T-12
ROOF PROFILE, reversible
profile height [mm]
13x80=1040
12
39
1120
covering width [mm]
1040
side
A
12
side
22
max 8
Available in the following coatings: polyester
gloss and mat as well as alugalvanized
and galvanized.
Trapezoid sheet T-12 is widely applied whenever the most important factors which decide about
the sheet application are constituted by a moderate price and material functionality. It provides
an effective look both in the case of single-family houses, multi-family house, offices and commercial or service pavilions.
“B” side is made upon the client’s special demand.
60
0,5 - 0,75
total width [mm]
80
14x80=1120
B
7
8
trapezoid sheets • klikfelc • window sills
Roofing sheets
T-18 NEW
trapezoid sheet T-18 NEW
ROOF PROFILE
profile height [mm]
18
0,5 - 0,75
total width [mm]
8x138=1104
138
32
17,5
1133
covering width [mm]
1104
69
69
max 8
1133
Available in the following coatings: polyester gloss
and mat as well as alugalvanized
and galvanized.
Trapezoid sheet T-18 NEW has a capillary groove, which prevents against a
possible trapezoid leakage on the joints. Its application is recommended whenever
apart from the typically functional features and price what is important is also an aesthetic look
of the covered surface. It provides an effective look both in the case of single-family houses, multi-family
house, offices and commercial, service or industrial buildings. Purchase of sheet of a required length and in a rich range
of colours create an opportunity to select the sheet in accordance to the client’s specified requirements.
T-35 NEW
trapezoid sheet T-35 NEW
ROOF* AND ELEVATION** PROFILE
5x203=1015
profile height [mm]
35
203
23,6
0,5 - 0,75
total width [mm]
1072* / 1044**
covering width [mm]
1015* / 1014**
max 10
35
111
92
34
1072
Available in the following coatings: polyester gloss
and mat as well as alugalvanized
and galvanized.
** - no capillary groove in the case of elevation profile
Thanks to the technical parameters trapezoid sheet T-35 NEW has an excellent construction strength and stiffness. The application of the capillary groove protects against a
possible trapezoid leakage on the joints. T-35 NEW is perfectly suitable for covering of surfaces of big
industrial buildings, production halls, service buildings, office walls as elevation profiles. It may also be applied in the
most modern solutions used in the construction of single-family and multi-family houses.
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl
www.cognor.pl
KLIKFELC sheet of RETRO type
ROOF AND ELEVATION PROFILE, irreversible
seam height [mm]
32
0,5
total width [mm]
519
covering width [mm]
495
495
15
32
19
16
519
max 8
minimal patch spacing [mm]
276
250
Available in the following coatings: polyester gloss and mat
as well as alugalvanized and galvanized.
minimal radius of roof slope 6°
(in the case of sheets, which are not
divided into lengths from the roof ridge to
the eaves)
minimal radius of roof slope 14°
(in the case of sheets, which are divided
into lengths from the roof ridge to the
eaves)
versions “with” and “without” overpress
Assembly, sheet joining
KLIKFELC covering of RETRO type is simple in form, universal and the most traditional and timeless product
in the offer of COGNOR Blachy Dachowe S.A. Thanks to the classic style KLIKFELC is applied during renovations of the roofs of historical objects or execution of sacred objects. A simple assembly technique of this
sheet on the clamp seam allows for a quick and simple assembly which does not require any special tools or
preparation. In the case of roof coverings of KLIKFELC type it is not necessary to fully lay logs upon the roof,
the fact which significantly decreases the investment costs. A possibility to mount KLIKFELC model in a vertical system on the walls provides an easiness of designing of non-typical, original elevations of any building
type. KLIKFELC profile is suitable for roofs with a low slope.
Window sills
external
steel window sills
Thanks to the application of the newest technologies in the production process the
window sills manufactured by COGNOR Blachy Dachowe S.A. constitute a complete protection system of frame, reveals and window stools against the influence of
atmospheric conditions. Steel, galvanized and coated window sill can be applied in any
climatic conditions, since it is inflammable, easy in assembly and stable after laying in the
building object. The applied materials and coating of the surface in the constant line coating
executed via COIL – COATING method with polyester lacquers results in the fact that during the
exploitation it does not require carrying out of any maintenance works. Lacquers and protective coats
of the newest generation used for the manufacture result in the fact that the window sills become a
functional and aesthetic finish element possible to be applied in every architectonical solution.
10
40
10
L
sheet thickness
0,5 - 0,7 mm
recommended length
max 6 m
available widths L [mm]
100; 125; 150; 175; 200; 225; 250; 275; 300; 350; 400
protection
ionization foil
RAL colours available in standard
8017; 9010
COGNOR Blachy Dachowe S.A. also manufactures non-typical window sills
in accordance to the submitted documentation.
9
10
profiles • workings
Profiles
bend cold, galvanized
profiles
Steel profiles made of steel tape galvanized on focus
performance tolerance – in accordance to the measurement norm PN-EN 10143
mechanical features – in accordance to the subject norm PN-EN 10327
229.024
symbol
229.029
V 113.025
VS 102
26,5
g
27
g
35
35
sheet thickness g [mm]
g
27,5
1,25; 1,5; 2,0
1,25; 1,5; 2,0
42
30
g
30
8
1,25; 1,5; 2,0;
1,25; 1,5
profile width [mm]
35
35
30
26,5
profile height [mm]
27
27
30
42
profile length [m]
6
6
6
6
There is a possibility to cut the sheet length to the dimensions specified by the client.
Performance tolerance:
length 6m
length cut on the client’s demand
intersection dimensions
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl
-5mm; +30mm
-3mm; +1mm
-0,3mm; +0,3mm
16
www.cognor.pl
Workings
10
70
0
sheet
workings
40
COGNOR Blachy Dachowe S.A. company also manufactures
various types of sheet workings in accordance to the client’s
specified demand. Maximal length is 6 m.
40
Snow barrier
1240
20
100
α
188
188
Basket gutter
290 lub 210
Barrel roof ridge (Ridge tile)
(small - 210 mm; big - 290 mm)
150
15
150
150
15
35
15
Wind brace I
133
150
15
Wall-adjacent slat I
150
120
70
43
30
30
Wind brace II
15
150
Wall-adjacent slat II
138
133
100
10
150
15
15
15
Side eaves
Wind brace III
11
12
gutter systems • steel tapes and sheets • services
gutter systems
PLAST DACH - steel
Gamrat Magnat - PVC
Gamrat Magnat is the newest generation gutter system, which thanks to its unique
resistance to sunbeams preserves a durable and deep colour for many years.
Therefore, Gamrat company offers colour durability. The uniqueness of the new
system consists in its “nature”, because Gamrat Magnat was created as a result
of a combination of a traditional PCV with modern acryle material. Research has
shown that the material shows a uniquely high resistance to the activity of aggressive atmospheric conditions.
6.
8.
3.
1.
9.
19.
4.
2.
7.
16.
5.
11.
10.
15.
13.
18.
17.
14.
12.
Gamrat Magnat is a totally anti-corrosive gutter system, which does not require painting, is easy to maintain in the cleanliness, the fact which results in an unproblematic
exploitation for many years.
Gamrat Magnet combines advantages of the newest material with a well-known traditional gutter shape. Thanks to the parabolic form and perfectly smooth surface, the
system guarantees a perfect capacity whereas a characteristic bend of the front and
the rear gutter’s edge strengthens and stiffens the installation.
Gamrat Magnat gutter system is really simple in the assembly thanks to the system
of connections on a clamp with a seal.
silver
copper
cherry
RAL 3004
green
RAL 6009
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl
GUTTER SYSTEM
1.
roofing gutter (length 3; 4 m)
2.
gutter’s coupling
3.
release funnel
4.
internal corner
5.
external corner
6.
gutter’s handle
7.
right gutter’s bottom
8.
left gutter’s bottom
9.
universal gutter’s bottom
10.
release pipe
11.
release pipe’s coupling
12.
elbow 67,5O
13.
release pipe’s clamping ring
14.
access eye
15.
T-connection 67,5O
16.
release pipe reduction
17.
release pipe counter-reduction
18.
steel hooks for clamping rings
19.
system mounting slat
www.cognor.pl
Sheets
longitudinal sheet cutting
steel tapes and sheets
COGNOR Blachy Dachowe S.A. uses the newest line for the longitudinal cut of the
galvanized and coated steel sheets. The maximal length of the cut tape may be 1250
mm whereas the thickness from 0,45 – 2,5 mm. Cutting knives have free regulation
thanks to special distance rings, which allow for an optimal setting of the cut, limiting
waste material to the minimum in this manner.
Within the scope of CGNOR Blachy Dachowe S.A. we offer the service of longitudinal
cut of the following sheets:
▪ galvanized
▪ coated
▪ non-corrosive
▪ aluminium
The offer also contains services made of the entrusted material.
Tapes, circles
LINE PARAMETERS FOR LONGITUDINAL CUT
sheet thickness
0,45 – 2,5 mm
circle width
do 1500 mm
max. circle weight
10 tonnes
internal circle diameter
500 i 600 mm
min. tape width after cut
25 mm
internal circle diameter after cut
500 mm i 600 mm
CUTTING TOLERANCE
for sheet thickness 0,5 – 1,0 mm
+/- 0,15 mm
for sheet thickness 1,0 – 2,5 mm
+/- 0,20 mm
Felting, foiling
foiling, felt application
services
COGNOR Blachy Dachowe S.A. company provides services within the scope of
sheet foiling and felt application on the sheet’s bottom part.
We guarantee the quality of the offered services thanks to the following factors:
▪ experience supported by the satisfaction of previous recipients,
▪ professional help and counselling of our designer and consultant at every
stage of execution,
▪ a possibility to execute any projects with the adjustment of technology for the
need of the applied material,
▪ a complex service and full organization of the production cycle for the previous and new clients.
13
14
accessories • colours • Złomrex Group Products
Accessories
roofing
accessories
mounting systems
Self-drilling screws for the wood of Farmer type available in colours corresponding to the colour of roof covering.
Screws for metal of Impax type
Roofing accessories
sealing system
We offer seals made of specially foamed polyutherane foams, which prevent
access of water, snow and other contamination. The shape of the seals corresponds to the sheet profile both with regard to roofing-tiles and trapezoid
sheets.
roof security systems
chimney bench, chimney stair, snow vestibules
ventilation systems
ventilation chimneys
roofing foils
sealing tapes
silicones
windows and roof hatches manufactured by FAKRO and OKPOL
gutter systems
steel - PLAST DACH
PVC - Gamrat
Arcelor Mittal
Roofing and elevation products
of the following companies:
Florprofile
Areco - Sweden
Layer plates of the following
companies:
Gór - Steel
layer plates with ployutherane foam
Florian Centrum S.A.
layer plates of Sandwich type with self-extinguishing foamed polystyrene of
EPS-80 class
Colours
sheet
colours
Sheet colours are available in a rich range of colours,
however the most typical include the following:
▪ galvanized, alugalvanized
▪ RAL 1002, 3005, 3009, 3011, 5010, 7024, 8004, 8017, 9002, 9006, 9010, golden oak, 7035, 9004
▪ MATS 3009, 3011, 6020, 7024, 8004, 8017, 9005
golden oak
The colours presented above are only informative and cannot serve as a colour pattern.
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl
www.cognor.pl
Products
FERROSTAL Łabędy
Steel mill Stalowa Wola
square Steel billets
R
rectangular
g
h
R
g
g
g
Nominal
dimension
round
1 m mass of
the billet
Number meters
on 1 Mg
Precise length
within the scope
Radius of corner
rounding
[kg]
[m}
[m]
[mm]
g [mm]
h [mm]
100
-
77
13,0
5,6 - 12,4
4
120
-
110
9,1
5,6 - 12,4
4
140
-
151
6,6
5,6 - 12,4
6
160
-
196
5,1
5,6 - 12,4
6
rectangle
165
140
177
5,6
5,6 - 12,4
6
round
170
-
175
5,7
5,6 - 12,4
-
square
Reinforced concrete bar
nominal diameter d [mm]
8
10
14
16
theoretical mass 1m [kg]
0,395
0,617
1,21
1,58
Fence system
11,5
116
METAL PALE DIMENSIONS
profile height
11,5 mm
charge width
137,7 mm
usable width
116 mm
total width
116 mm
max. recommended sheet length
min. element length
thickness
coat
2000 mm
150 mm
≈ 0,50 mm
polyester gloss/mat, alugavanized,
wood-like sheet
15
ZŁOMREX GROUP
Tel: +48 18 4429 151
Fax: +48 18 4429 187
www.cognor.pl

COGNOR Blachy Dachowe

Transcription

Similar documents

a PDF of This Case Study

InsulStar Tech Bulletin

free roofing contractor show pass

ArrowLine FAQs - Edco Products

Skoda Roomster - Platinum Motor Group

TU PLUS- Tile System

Roof DRainage SyStemS Gutter Guards

Free Trade Show Pass For Contractors

Dukono - Carlyle Collective