See our LED Push Button Catalog

Transcription

LED push-button: momentary & alternate switches
and indicators
Catalog
ZODIAC AERO ELECTRIC (ZEL)
Aircraft Systems
Our
catalog
This catalog introduces Zodiac Aero Electric (ZEL), part of Zodiac Aerospace
group, LED push-buttons. They are designed and manufactured to meet
the specifications of modern cockpits.
Your LED push-button configuration can be designed through the use
of this catalog. For specific product request, Zodiac Aero Electric (ZEL)
remains at your disposal to study new configurations for your application.
www.zodiacaerospace.com
A
All characteristics B
Customization procedure 4-8
9 - 13
STEP 1
Select the body (base)
11
STEP 2
Customize the head (cap)
12
C
Accessories 14 - 18
D
Installation procedure 19 - 21
General terms of sales 22 - 23
Glossary
Actuation force: the force which must be applied to the cap to move it from the free position to the operating position.
Actuation travel: distance between the unlatched cap height and the position of the cap.
Cap extraction force: the force needed to remove the cap assembly.
Mounting sleeve: receptacle for proper installation of the LED push-button on the front panel.
Connector: electrical connection interface.
Panel spacer: allows the position of the switch to move in relation to the panel.
2
Zodiac aero electric (ZEL) | LED Push-Button: Momentary & Alternate switches And Indicators
Zodiac AERO ELECTRIC (ZEL)
Zodiac Aero Electric (ZEL) designs, develops, produces and supports
cockpit systems, equipment and components for commercial aircraft,
regional aircraft, business jet and helicopter manufacturers.
Our product capabilities:
H Cockpit components
H Landing gear control lever
H Nose wheel steering unit
H Integrated control panel
H Overhead panel
Zodiac Aero Electric (ZEL) has proven experiences
with Airbus, Boeing, Bombardier, Embraer, Gulfstream, Dassault
and Airbus Helicopters.
Our push-button switch options
We have three different switch configurations.
H Indicator: illumination of message without switch action
H Momentary: switch product with actuation only while holding button.
Switch will return to unactuated position
H Alternate: switch product with actuation maintained until pressed
again. Switch will change physical position
ZEL LED lighted indicators and switches are designed for mounting panels
of 1.2 mm (= 0.047 inch) to 8 mm (= 0.315 inch) thick.
Zodiac Aero Electric (ZEL) integrates its own components into control
panels. Zodiac Aero Electric (ZEL) is a long time supplier of choice for
cockpit components high quality product.
Zodiac Services
Zodiac Services is our organization dedicated to serve the
aftermarket: Airline, MRO, Operator or Distributor
www.services.zodiacaerospace.com
 For all orders
UE phone: +33 1 55 82 53 96 - US phone: #425-897.4327
email: [email protected]
3
A
ALL
Characteristics
In this chapter, you will find all technical information useful for the
creation of the push-button
Product characteristics Composition of push-button:
body (base) & head (cap)
1. The body (base)
2. The head (cap)
General characteristics
Materials characteristics
Mechanicals characteristics
Environmental characteristics
Electrical characteristics The flexible printed circuit
The dimming
Optical characteristics Chromaticity diagram - CIE 1931
Contrast
Luminance
4
5
5
5
5
6
6
6
6
7
7
7
8
8
8
8
Product characteristics
Composition of push-button: body (base)
& head (cap)
 These indicators are composed of two parts
1 - The body (base):
The body is composed of:
H 4 Micro switches for alternate and momentary action
H A shaft to assure the link between the head and the body
H A locking system for alternate action
2 - The Head (cap):
Zodiac Aero Electric (ZEL) LED push-button switch has a removable head, which
remains attached to the body through a flexible printed circuit.
The head is composed of:
H On the back side, LEDs are integrated on a flexible printed circuit
Locking of the head is done by a clip permitting to support shocks, vibrations and
head extractions.
Zodiac AERO ELECTRIC (ZEL)
led switch advantages
types of LEDs switch
H 3
(indicator, momentary, alternate)
H Sealed or unsealed version
H Short lenght
H Light weight
H Customizable head
H A various range of accessories
H Easy mounting
LED ILLUMINATION ADVANTAGES
Increased lifetime
Reduced current drawing
Resistance to shock and vibration
Reduced face temperature and power
consumption
H Reduced weight
H Lower maintenance costs
H
H
H
H
5
All characteristics
GENERAL CHARACTERISTICS
Materials characteristics:
Our switches are composed of metal parts protected against natural and galvanic corrosion. The thermoplastic
materials are PPSs filled with high temperature fibre glass, self-extinguishing and nonflammable (category
UL9UB.0).
H Base body: aluminium alloy AIMgSi T6 hardness 65 to 85 HV
H Switch contacts: gold-plated silver
Mechanicals characteristics:
Test description
Levels
Switch actuation force
9 to 18 N
Total travel
3.2 +/- 0.2 mm
Cap shell extraction force
>100 N
Weight* indicators
<17 g
Weight* momentary / alternate
<25 g
* Comparison between two 4PDT momentary non-sealed switches without connector, sleeve, or spacer
Environmental characteristics:
Survival temperatures
-55°C
-40°C
Limit operation temperatures
+70°C
-15°C
Normal operating temperatures
Altitude

6
+50°C
50,000 feet
The push-button switches are tested in accordance to the requirements of:
Salt spray
RTCAD0160, Section 14, Category S
Sand and dust
RTCAD0160, Section 12, Category D
Fungus growth
RTCAD0160, Section 13, Category F
Resistance to solvents
RTCAD0160, Section 11, Category F
Shocks
RTCAD0160, Section 7, Category E
Vibration
RTCAD0160, Section 8, Category H, Curve
Product configuration
Electrical characteristics
The flexible printed circuit:
The flexible printed circuit is the master part of the LEDs lighted indicator. It links mechanically and electrically the head and the body.
It performs the following functions:
H
H
H
H
Lighting through LEDs
Keeping body with head together when this one is off
Supporting electrically and mechanically the LEDs and components together
Wiring connections
The thickness of this flexible printed circuit has been determined to be as flexible as possible to make 150,000 cycles for mechanical endurance
and enough rigidity for face traction.
FULL DISPLAY
(MONOCASE)
The DIMMING:
The LED PB switch lighting can be controlled either by a continuous
28VDC power supply or by 28VDC PWM source.
The current consumption is <50 mA.
1) 28VDC power supply mode H The use of a continuous 28VDC on pins 9 and 4
(pin 4 only for monocase) allows a BRIGHT mode lighting
H The use of a continuous 28VDC on pins 8 and 5
(pin 8 only for monocase) allows a DIM mode lighting
SPLIT DISPLAY
(BICASE)
2) 28VDC PWM control mode
The use of a 28 VDC PWM source on pins 9 and 4 (pin 4 only for monocase)
allows a full dimage of the lighting by varying the PWM duty cycle. The variation
law between the luminance and the duty cycle is linear.
Information | Sealed version & switch tests
Sealed version: Zodiac Aero Electric (ZEL) LED push-button is protected against dust and fluids.
Contact ratings
Circuit
high level (28 Vdc)
Low level (5 VDC to 28 VDC)
Switching endurance
40,000 cycles
100,000 cycles
Resistive (L/R ≤0.1 ms)
5 A per pole
3A
Inductive (L/R ≤5 ms cos=0.8)
3A
1.5 A
Lamp (peak level: 10 to 15 ln)
1A
1A
150,000 cycles
contacts shall accept a current between
1 mA and 100 mA under low voltage.
To keep low-level characteristics switch
contacts shall accept a current between
1 mA and 100 mA under low voltage.
7
All characteristics
Optical characteristics
Chromaticity diagram - CIE 1931:
The display legends are available in five standard colors. You will find the chromacity
limits on the Typical 1931 CIE Chromaticity coordinate.
Amber
BLUE
Green
RED
White
x
y
x
y
x
y
x
y
x
y
0.57
0.43
0.12
0.25
0.25
0.74
0.71
0.29
0.28
0.37
0.56
0.42
0.12
0.15
0.25
0.63
0.70
0.28
0.28
0.29
0.60
0.38
0.18
0.15
0.37
0.63
0.67
0.31
0.31
0.29
0.61
0.39
0.18
0.25
0.68
0.32
0.37
0.35
Contrast:
Sunlight readable legends
Lenses with sunlight readability are identified by
contrast values between legend and background.
These values are measured perpendicularly to
the viewing surface of the indicators or switches,
exposed at an angle of 45° +/- 2° to 10,000 foot
candles lighting (107 000 Lux).
Luminance:
Always visible
white legends
colors
CAll
Blue
>0.6
>1
RED
>0.4
>1.1
AMBER
>0.8
WHITE
>0.7
>1.1
Green
>0.6
>1.1
CEt
CEt
<0.1
>1.1
Average minimum luminance values in Candela per square metre (Cd/m2) and foot-lambert (fL) for indicators or switches with 8 leds
version sunlight readable
Mil norm: S(1B)
Bright
colors
Green
Blue
RED
AMBER
WHITE
8
version Always visible white
Mil norm: N(2G2)
DIM
Bright
version Colored background
Mil norm: C(2B)
DIM
Bright
measurement
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Cd/m2
600
1100
45
90
200
350
10
30
fL
175
321
13
26
58
102
3
9
Cd/m2
400
690
30
60
150
250
7
21
DIM
Min.
Max.
Min.
Max.
60
fL
117
201
9
17
44
73
2
6
Cd/m2
950
1350
60
120
400
650
65
110
400
800
30
fL
277
394
17
35
117
190
19
32
117
233
9
17
Cd/m2
850
1300
70
130
400
650
25
50
700
1400
50
100
204
409
15
29
fL
248
379
20
38
117
190
7
15
Cd/m2
900
1300
45
90
300
600
10
30
fL
263
379
13
26
88
175
3
9
B
customization
Procedure
In this chapter, you will learn to create your part number
to order your own push-button
STEP 1
Select the body (base) 11
STEP 2
Customize the head (cap) Full display (monocase)
Split display (bicase)
12
13
9
Codification procedure

-
Your reference will be composed as follow:
STEP 1
STEP 2
Select the body (base)
Customize the head (cap) and write your text
-
8
VL
2
YOO
3
Cap shell
design
1
4
Head
1
Note your text in your order
BE CAREFUL
 Wording will consist of alphanumeric capital letters
 SPACES and DOTS will be counted as characters
 * = new case
 , = next line in the same case
 () = space
STEP 1
1
Example:
---
--
Character
and writing
Aspect
Text
2
3
4
4
Full display
Mini
load
(monocase)
master Mini, Load, Master
218VL23
Select the body
page 11
pages 12-13
Result
Customize the head
2
Character and writing: Futura medium 3.2 mm
3
(T)op: (S)unlight readable/(B)lue
(B)ottom: always visible (W)hite/(A)mber
TSB / BWA
4
Note it on your order with your text FAULT*OFF
FAULT*OFF
Your complete reference is
FAULT
218VL23
B
TFM2 / BFM 2
10
B
YOO
{
STEP 2
1
TSB / BWA
TFM2 / BFM 2
OFF
FAULT*OFF
BOT1
BOT2
Split display
(bicase)
BOT1*BOT2
Example:
H Push button unsealed
H Split display head
H Legend:
Top case:
FM2 (Futura Medium High 3.2/
Lines 3/Character 4)
Bottom case:
FM2 (Futura Medium High 3.2/
Lines 3/Character 4)
H Visual aspect:
Top case: sunlight readable
Bottom case: always visible white
H Color:
Top case: blue
Bottom case: amber
H Text:
Top case: FAULT
Bottom case: OFF
STEP 1
Select the Body (base)
 Our products exist in 3 different types of switch.
Indicator
Illumination of message without switch action.
Circuit diagrams
Momentary
Body (base)
Alternate snap action with 4 PDT (Pole
Double Throw). The position changes
when the cap is pressed.
Then the switch state comes back to
the original state when deactivated.
1
Circuit diagrams
Alternate
Body (base)
Momentary snap action with 4 PDT
(Pole Double Throw). The momentary
is retained in the latchdown position
until it is pressed to return to the
original state.
Select the type of switch needed and note your reference
Type of Body
(base)
Indicator
Momentary
Alternate
Version
Unsealed
Sealed
Unsealed
Sealed
Unsealed
Sealed
Termination
Body (base)
configuration
Family LED
Voltage
Circuit diagrams
108VL23
Indicator
4 PDT
4 PDT
REfErence TO note
408VL23
Standard Body
LED
28 VDC
DIM / BRIGHT
218VL23
518VL23
318VL23
618VL23
You have selected the body (base). Now customize the head: full display (monocase) page 12 or split display (bicase) page 13.
11
Codification procedure
STEP 2
Customize the Head (cap)
Full display (monocase)
3
1
Select the cap shell design
1
TOP
a
Unlighted
lighted
Black background
and legend
not visible
Colored
and sunlight readable
lighted letters
on black
backgound
Sunlight readable S(1B)
reference
Select the visual aspects of your head
with a configuration and the colors
Select the character and the writing
The character height is the distance from the top to the bottom of a
capital letter. These typefaces are available in either or both upper and
lower cases. The number of characters per line may be different
according to the height.
Futura
Medium
Futura
Medium
Condensed
Heigh
(in mm)
NUMBER
OF LINES
NUMBER OF
CHARACTERS
PER LINE
MAXIMUM
2.5
4L
6C
text
FM 1
3.2
3L
4C
text
FM 2
5.08
1L
3C
text
FM 3
3.2
3L
7C
text
FMC 1
EXAMPLE
REFERENCE
Black background
and legend
not visible
Colored
and sunlight readable
lighted letters
on black
backgound
text
Number of characters per line can change
according to the character chosen.
4
12
Ref.
BLUE
SB
Green
SG
RED
SR
White
SW
Amber
SA
RED
CR
Amber
CA
BLUE
WB
Green
WG
RED
WR
White
WW
Amber
WA
Black letters
on lighted colored
background
text
Black background
and legend
visible white
Always visible white N(2G2)
2
Colored
background C(2B)
text
colors
text
STEP 2
Customize the Head (cap)
3
1
Select the visual aspects
of your head with a configuration
and the colors (top & bottom)
TOP
Select the cap shell design
Unlighted
lighted
colors
Blue
reference
1
Bottom
2
Sunlight readable S(1B)
TOP
Black
background
and legend
not visible
B
Colored
and sunlight
readable
lighted letters
on black
backgound
Green
RED
WHITE
text
2
Select the character and the writing
The character height is the distance from the top to the bottom of a
capital letter. These typefaces are available in either or both upper and
lower cases. The number of characters per line may be different
according to the height.
Colored
background C(2B)
AMBER
Futura
Medium
Futura
Medium
Condensed
Heigh
(in mm)
NUMBER
OF LINES
2.5
2L
6C
text
TFM 1
BFM 1
3.2
1L
4C
text
TFM 2
BFM 2
3.2
1L
7C
text
TFMC 1
BFMC 1
EXAMPLE
TOP
BOTTOM
Always visible white N(2G2)
REFERENCE
NUMBER OF
CHARACTERS
PER LINE
MAXIMUM
Black
background
and legend
not visible
Black letters
on lighted
colored
background
text
Black
background
and legend
visible white
Colored
and sunlight
readable
lighted letters
on black
backgound
RED
AMBER
Blue
Green
RED
text
text
WHITE
AMBER
Number of characters per line can change
according to the character chosen.
4
Bottom
Ref.
TSB
TSG
TSR
TSW
TSA
TCR
TCA
TWB
TWG
TWR
TWW
TWA
colors
Blue
Green
RED
WHITE
AMBER
RED
AMBER
Blue
Green
RED
WHITE
AMBER
Ref.
BSB
BSG
BSR
BSW
BSA
BCR
BCA
BWB
BWG
BWR
BWW
BWA
You have completed your reference. Remember to note your text when you will order. Go to page 14 to browse the accessories.
13
C
Accessories
In this chapter, you will be able to choose the accessories you need
to install or protect the push-button
Add a connector and mounting sleeve Connector plugged to the mounting sleeve
Connector fixed to the PWB
15
15
16
Add a flip guard 17
Add a spacer 18
Toolcase OUT242 18
Memo
Accessories are to be ordered separately.
They have their own reference.
All dimensions are given in mm.
1 mm = 0.39 inch.
14
Add a connector
.1 and MOUNTING SLEEVE
3

Connector plugged to the mounting sleeve
1st assembly combination. The connector is equiped with female sockets
as described in standards (MIL-C-39029/57B/54).
PLUG CONNECTOR
reference
250SV01
FRONT FACE REMOVABLE MOUNTING SLEEVE (not compatible with sealed version)
reference
Mounting panel
(metal)
20
,3
260SV01MY1
25
19,7
27,1
R0
10,3
Ø3
You will need crimp socket contacts (not supplied): MIL-S-39029/57B/54
15
Accessories
3
Add a connector
.1 and MOUNTING SLEEVE

Connector fixed to
the Printed Wiring Board (PWB)
2nd assembly combination
PIN CONNECTOR
reference
TOP
28OSV01AC
The PWB mounting allows to plug Zodiac Cockpit and Lighting Systems push-button switch into a PWB header that is soldered into the circuit board.
Drilling
Position
A1
A2
A3
B1
B2
B3
C1
C2
C3
D1
D2
D3
4
5
6
7
8
9
X
5.94
1.98
-1.98
5.94
1.98
-1.98
5.94
1.98
-1.98
5.94
1.98
-1.98
-6.4
-6.4
-6.4
-6.4
-6.4
-6.4
Y
-5.94 -5.94 -5.94
-1.98
-1.98
-1.98
1.98
1.98
1.98
5.94
5.94
5.94
-6.4
-3.95
-1.5
1.5
3.95
6.4
280SV01AC
FRONT FACE REMOVABLE MOUNTING SLEEVE (not compatible with sealed version)
reference
Light plate
(plastic)
20
270SVO1MY1
21
27,1
R1
21
NO FRONT FACE REMOVABLE MOUNTING SLEEVE
reference
(compatible with sealed version)
Mounting panel (metal)
19,4
,8
17,4
19,4
R0
Light plate (plastic)
19,4
16
19,4
R1
20
It requires access to the back of the
mounting panel to replace a unit.
VF1016
3.2
Add a FLIP GUARD
To prevent accidental actuation of the LED push-button switch, Zodiac Cockpit and Lighting Systems proposes to
add a flip guard. The flipping part of this guard rotates from 0 to 180°. They remain closed until manually lighted.
They return to closed position when released.
colors
reference
431KU02 Unsealed flipguard (opening angle 180°)
431KU02AAY00
431KU02BBY00
435KU02 Unsealed flipguard (opening angle 180°)
435KU02AAY01
435KU02BBY01
702KU01 Guard-sealed (opening angle 90°)
702KU01-50
632KU01 Transparent unsealed flipguard (opening angle 180°)
632KU01-OAA
632KU01-OAJ
17
Accessories
3.3
Add a spacer
The spacer is used to change the switch position in relation
the front panel. The thickness of your overlay and where
you want your switch to be in the actuated and unactuated
position will affect your spacer height.

How can you choose your spacer ?
VK
Different heighT are available reference
Spacer 2.6 mm
VK1507
Spacer 2.4 mm
VK1507A
Spacer 4.8 mm
VK1507B
Spacer 2.9 mm
VK1507C
Spacer 5.5 mm
VK1050
• 260SV01MY1 is not compatible wih spacers
• Spacers are not compatible with sealed version
3.4
VK1050
TOOLCASE OUT242
1
2
3
1 LED push-button extractor
4
5
2 Screwdriver guide
3 Head extractor
4 Lamp body extractor
5 Torque screwdriver
18
D
installation
Procedure
In this section are the instructions regarding installation of the LED
pushbutton into a control panel assembly.
19
Installation procedure
INSTALLATION PROCEDURE
 To assemble LED push-button,
you require:
H
H
H
H
 Mounting panel CUTOUT
Mounting panel cutout
(metal)
Lighted panel clearance
(plastic)
a led push-button
a spacer (if used)
a mounting sleeve
a connector module
This procedure requires access to the back of the mounting panel.
 LED push-button LAY OUT
Several precautions:
 Don’t forget to disconnect all lighting and power of
your panel before working on any switch.
 Always have in mind that the flex circuit is
mechanically attached from the cap shell to the
body. So be very cautious in your actions.
 To prevent the sealed push-button from being
damaged, check that the cap shell is in the
“non-compressed” position.
 Information about replacement
of your LED push-button:
H With mouting sleeve VF1016, you will need to have access to the
back of the mounting panel.
Head (cap)
Body (base)
 LED push-button PIN OUT
ABCD
1
2
3
H With mounting sleeves 260SV01MY1 or 270SV01MY1, you will be
able to work through the front of the mounting panel. Remove, the
terminations will not be affected by any replacement.
1. Install the mounting
sleeve and spacer if
used by screwing it
on the mounting panel.
20
2. U sing the pushbutton
extraction tool (ZEL OUT 74),
pull the cap shell out from
its body.
Connections
3. T wo mounting screw heads
are now visible. With the
torque screwdriver, rotate
the two mounting cams.
4. Install the switch
through panel cut off.
Verify you put it in the
correct position (the
body is marked with the
word “TOP”).
ZEL switch led configuration:

1
Config 1
2
3
5
4
6
1
2
3
4
5
Flip guard
Body
Lighted panel
Mounting panel
Mounting sleeve
260SV01MY1
6 Connector 250SV01
Body (base)
Mounting
Sleeve
produCt
reference
1
Indicator, momentary, alternate
Standard body (base)
2
No front removable
VF1016
3
4
Connector
(not compatible with sealed version)
3
5
4
6
7
Flip guard
Body
Lighted panel
Mounting panel
Spacer
Mounting sleeve VF1016
Connector 280SV01AC
Spacer
Accessories
250SV01A
6
PWB Termination
280SV01AC
✘
Spacer 2.6 mm
VK1507
✘
Spacer 2.4 mm
VK1507A
✘
Spacer 4.8 mm
VK1507B
✘
Spacer 2.9 mm
VK1507C
✘
Spacer 5.5 mm
VK1050
✘
flip guard 180°
632KU01
✘
✘
✘
flip guard 180°
431KU02
✘
✘
✘
flip guard 180°
435KU02
✘
✘
✘
guards sealed (90°)
702KU01-50
✘
✘
✘
Tool case
OUT242
7
8
(compatible with sealed version)
Config 3
Tools
1
2
3
5
6
4
270SV01MY1
Plug in
1
1
2
3
4
5
6
7
260SV01MY1
5
Config 2
2
Front removable
Config 1 Config 2 Config 3
1
2
3
4
5
Flip guard
Body
Lighted panel
Mounting panel
Mounting sleeve
270SV01MY1
6 Connector
280SV01AC
Essential for mounting
✘ Optional
You can order the switch or accessories individually.
(not compatible with sealed version)
5. F rom the front of the
mounting panel, rotate
locking screw to bring
mounting cams to lock
position with the torque
screwdriver.
6. P ut the cap back into
position by pressing on it.
7. C onnect it on the connector
module. Push with
precaution until the pins
are seated in the connector
module.
Your LED push-button
switch is installed!
21
schedule
General terms of sales
 Acceptance of order
 Delivery
The customer's order and its acceptance by l'EQUIPEMENT ET LA CONSTRUCTION ELECTRIQUE (here in
called Company), in the same way as the acceptance of
all goods by the customer, until the customer's agreement
to these Standard Terms and Conditions of sale.
Company is only committed by the remittance of a firm
offer, on its headed paper. It is not bound by the undertakings that may be entered into by its representatives or
employees as long as it has not confirmed them. Offers
will hold good only for the option period indicated on the
quotations. This is three months, apart-from stipulations
to the contrary.
For all the supplies being the subject of an additional
order or amendment prices and delivery times are quoted
without taking the main order into account.
The delivery is considered to be made at Company's
works or stores.
The equipment travels at the consignee's risk, even if
shipped "carriage paid" or "assembled on the spot"; these
conditions being considered as a factor determining the
price agreed to without any shift in responsibility.
The risks relating to the products sold become the liability
of the purchaser as soon as he is notified that the equipment is at his disposal or else, if in-factory acceptance has
been scheduled, eight days after he has been informed
that the equipment is ready.
 Cancellation of order
An order may not be either totally or partially cancelled
without Company's prior agreement in writing. ln the
event of an order in process of execution being cancelled,
all the goods whose manufacture has commenced will
be delivered and billed. Moreover, if Company has had to
procure raw materials or special products in view of executing the aforesaid order, the cost of these procurements
will be billed without deducting their possible reemployment value.
 Design studies and projects
The studies and documents handed over by Company
remain its sole property and should be returned on request.
Company retains the patent rights of its projects which
may not be communicated or executed without its
permission in writing.
22
 Prices
Company's quotations are established before VAT,
ex-works. ln the event of variations of economic conditions,
they can be readjusted where listed equipment is concerned, or revised whilst the order is in process for equipment supplied against estimates.
 Delivery times
The delivery times mentioned on Company's documents
are provided as an indication. Company will do everything
possible for them to be observed. Nevertheless the delays
which may be observed may in no event involve Company's
responsibility. No penalty for the late delivery may be
applied without prior agreement in writing from Company.
ln this case the total amount of the penalties may not
exceed 10% of the price agreed. They will only be applied
if there is a real and duly established prejudice. Company
is automatically released from any commitment concerning delivery times and penalties, if the conditions have
not been observed by the purchaser or if the information or documents to be supplied by the purchaser have
not arrived by the dates scheduled. Strikes or lock-outs,
epidemics, wars, fires, floods, transport delays, legal changes
of the working hours, toolings incidents, scrapping of
important parts during manufacture, duly established by
the customer or one of his mandated agents, or any other
case of force majeure beyond the control of Company,
can warrant an extension to the delivery time.
 Terms of payment
Company's invoices are payable at its head office,
7 rue des Longs Quartiers - CS 50029 - 93108 Montreuil
Cedex - France, in the following conditions:
• by cheque, on removal of the goods, for a first transaction
• by cheque or bank transfer, accepted and domiciled
draft, promissory note, letter of credit or bank transfer
at 30 days starting from end of month of invoice date
Any additional or different terms shall not be binding
upon Company unless specifically accepted in writing by
an authorized representative of Company.
Bills should be sent to us within 15 days after their issue.
The fact of not paying an invoice on its due date makes
the payment of all the other invoices due immediately.
For any late payment on any one of the due dates,
the sums due will bear interest at a rate of 3 times
legal interest rate without any prior notice required, and without prejudice to any other right which
Company reserves for itself.
This rate equals to European Central Bank (ECB) interest
rate applied in its current refinancing operation, plus an
increment of 10 percentage points.
over a period of 12 months as from the date of delivery.
It is applicable provided that products have been used
complying with the indications or specifications given
by Company and that no work has been done without
Company's previous agreement.
Company reserves the right to modify products in view of
improving them in order to meet warranty requirements,
purchasers undertaking not to claim any indemnification.
For products returned to Company in view of inspection,
calibration, repair and generally speaking all maintenance operations, Company's warranty is limited to three
months, in the same conditions as above.
No claim will be accepted if it has not reached the
Company within a period of one month from receipt of
the goods, which time is increased to three months in the
case of a latent defect which could not be observed within
one month.
 Disputes
Acceptance of an offer or sending of an order is equivalent
to agreeing to the Standard Terms and Conditions of sale.
The special conditions indicated on an order form only
commit Company insofar as they are not contrary to or do
not modify the terms specified in the above text.
Any dispute concerning the interpretation or application
of these terms will, failing an amicable agreement, be
decided only by the Commercial Courts with jurisdiction
over Company's domicile, whatever the place of delivery
and the method of payment, even in the case of calling
on the warranty or there being more than one defendant.
 Transfer of ownership
The transfer of ownership of the term sold takes place
automatically on the day on which it is fully paid for.
 Warranty
Company's warranty covers reconditioning free of charge,
parts and labour, of all products returned carriage paid,
23
Zodiac Aerospace
From its very beginning, Zodiac Aerospace has played a leading role in the progress
of activities as diverse as Aerosafety & Technology, Aircraft Systems, Cabin Interiors.
Its worldwide reputation has been built on long-term commitment.
Focused on its historic core business of aerospace, Zodiac Aerospace is committed
to ongoing implementation of the strategy that has proved so successful for over
thirty years. Zodiac Aerospace holds world-leading positions in its niche markets,
and offers a broad range of systems, equipment and services to all the world’s
aircraft manufacturers and airlines.
Recognized by the world’s leading aerospace companies, the skills of the Aircraft
Systems segment cover both civil aviation and military applications.
Crédit photo: Zodiac Aero Electric (ZEL) - 2014
Zodiac Aero Electric (ZEL) has a strong position in their three market segments:
flight deck equipment and systems, external lighting systems and windshield wiper
system. Zodiac Aero Electric (ZEL) designs, develops, produces and supports whole life
cycle systems and equipment to commercial aircraft, regional aircraft, business jet and
helicopter. The commitment for innovation combining exciting product development
and efficient manufacturing is our core philosophy.
ZODIAC AERO ELECTRIC (ZEL)
Aircraft Systems
7 rue des Longs Quartiers - CS 50029 - 93108 Montreuil Cedex - France • Tel: +33 1 55 82 50 00 • Fax: +33 1 55 82 50 10
www.zodiacaerospace.com
For all orders
email: [email protected] - EU phone: +33 1 55 82 53 96 - US phone: #425-897.4327

See our LED Push Button Catalog

Transcription

Similar documents

Spec Sheet - AirGizmos

GUlFSTREAM G450

brochure

PDF - Japanese House at the Boston Children`s Museum

Although the Chinese signs are the real animals, they

QuickShip – Aero/Sync, beep, beep...we`ll get it there fast!

KITCHEN FAUCETS

ProSeries 1 and ProLED Series 1

X-TARMAC HANDGUARDS PARAMANI X