the Master Sales Tool

Transcription

May 2015
Master
POPLIST
A comprehensive guide to literature and
point-of-purchase items available by brand
Keep up with SashcoInc.
800-767-5656 • www.sashco.com
POPLIST
May 2015
Literature & POP Sales Tools
TECHNICAL DATA
Won’t Crack. . . It Just Stretches
Description:
Big Stretch® is a high-performance water-based
elastomeric sealant with powerful adhesion and
superior elasticity. It spans gaps up to 2” wide
and stretches up to 500% of original joint size
without cracking. Big Stretch won’t crack…it
just stretches.
Where to Use:
Interior and exterior applications, including:
•Windows
•Doors
•Siding
•Vents
•Soffits
•Baseboards
•Eaves
•CrownMoulding
•Sound-proofinginteriorwalls
ADheres to: (allconformtoASTMC794)
Mostbuildingmaterialsincluding:
Metals
•Aluminum
•Brass
•Steel
•AnodizedWindows
plastics
•ABS
•Lexan®* •AcrylicSheet
•Plexiglass
•PVC
•Fiberglass
•Urethane
•Vinyl
•Polycarbonate
•Polystyrene •Nylon
Other Surfaces
•Asphalt
•Tile
•CinderBlock
•Wood
•Formica®*
•Corian®*
•Glass
•Mortar
•HotmeltButyl
•Stucco
•Brick
•Concrete
•Stone
•EIFS
•FiberCement
•Drywall
FeAtUres
•Superelastic,movesinsteadoftears
•Spansgapsupto2”widewithnoslump
•Powerfuladhesion
•Highdurability
•Water-based
•LowVOC
•Superbpaintability
•Freeze-thawstable
•LimitedLifetimeWarranty
•Full10.5oz.ineverycartridge
•Won’tcausepaintgloss
•Exclusivestopflowplunger
colors:
•White
•Redwood
•Woodtone
•DarkBrown
•PineGreen
•Limestone
•Almond
•Tan
•Gray
•Clear
•Black
•Ironstone •SlateGray
Visitwww.sashco.comforacolor
compatibility chart that matches Big Stretch
colorstovariousvinylwindowmanufacturers’
colors.
pAckAging:
•10.5oz.plasticcartridges
•29oz.fibercartridges(whiteonly)
coverAge:
A10.5oz.cartridgewillyieldapprox.26lineal
feetwitha¼”(6mm)bead.
pAintAbility:
Paintablewithexteriorlatexpaints/stains
after4hoursandinteriorlatexpaints/stains
after24-48hours(moreforhumidconditions).Paintablewithmostexterioroil-based
paints/stainsafter1week.Note:somelowend,flatlatexpaintsmaycrack,regardlessof
cure time.
* Corian®, Lexan®, and Formica® are registered
trademarks of their respective owners.
beneFits
Eliminatescostlycallbacks
Stayswhereit’sapplied
Won’ttearorpullaway
Performswellinmostanytypeofclimate
Easytotoolandcleanup
MeetsstrictestVOCrequirements;
environmentallyfriendly
Compatiblewithlatexpaintandmost
oil-based paints, sealers and stains
Simplythaw&apply,nowastedproduct
Haveconfidencethatyou’reusing
the right product
Moreforyourmoney
Nomoreshinycaulklines
Lesswaste,lessmess
Technical Data Sheet
BIGDATATEC
Product Brochure
BIGBROCH
Color Chart
BIGCLRCHRT
Windows
Doors
Siding
Won’t Crack . . . It Just Stretches
Channel Strip
BIGCHSTRIP
Big Stretch Block
BIGBLOCK
Channel Sticker
BIGCHNLSTKR
POPLIST
May 2015
TECHNICAL DATA
The Tough Elastic Sealant for Every Job
Sticks to Almost Anything*
DESCRIPTION:
Super-elastic. Superior adhesion. Paintable. It
seals around anything: tubs and shower stalls,
sinks and counter tops, window frames and
door frames, PVC and metal pipes. Apply to
wet or dry surfaces, indoors and outdoors.
It’s tough and can handle up to 400% joint
movement. It’s scrubbable. It sticks to just
about anything. Lexel clear sealant is 19 times
clearer than silicone and won’t yellow or cloud
up over time. Lexel won’t let you down.
WHERE TO USE:
In most any place you’d use silicone, including:
•Kitchensandbathrooms,includingfixtures,
countertops and backsplashes
•Onwallpaperedgestopreventcurling
•Aroundtrim,windows,doors,thresholds,
sills, siding, vents, pipes and air conditioners
•Aroundleakyductwork
*ADHERES TO: (all conform to ASTM C794)
Most building materials including:
Metals
•Aluminum
•Copper
Plastics
•Brass
•Silver
•ABS
•Vinyl
•PVC
•Fiberglass
•Nylon
•Lexan®**
•Polycarbonate
•Steel
•Nylon
•AcrylicSheet
•Plexiglass
FEATURES
•19timesclearerthansilicone
•Superelasticwithstrongadhesion,
won’t tear, crack or pull away
•Paintable
•Water&mildew-resistant
•Won’tfreeze
•Useonwetordrysurfaces
•Tough&easilycleaned
•Highdurability
OTHER SURFACES:
•Asphalt •Stone
•Concrete •Drywall
•Glass
•Stucco
•Wood
•EIFS
•Corian®** •Brick
•Cement •Mortar
•Thinset
•CeramicTile
•Formica®**
•FiberCement
•AlkydStain
•Cloth/Canvas
•Porcelain
COLORS:
•Clear
•White(WhitenotavailableinCA)
•WhiteVOCcompliant
PACKAGING:
•5oz.squeezetubes
COVERAGE:
A10.5oz.cartridgewillyieldapprox.26
linealfeetwitha¼”(6mm)bead.
PAINTABILITY:
Withlatexpaint/stainafter24-48hoursor
oil-basedpaint/stainafter3-4weeks
** Corian®, Lexan® and Formica® are registered
BENEFITS
Nocloudinessoruglycaulklines
Unlikesilicone,paintstickswith
no separation
Useindoorsoroutdoors
Nowastedcaulkincoldweather
Applyinmostanyweather
Cleanwithabrasivecleaners
with no damage
the right product
Lesswaste,lessmess
Performs well in most any type of climate
Moreforyourmoney
LXLDATATEC
Keep up with SashcoInc on:
Packaging Sheet
LXLPKG
Product Brochure
LXLBROCH
Channel Strip
LXLLGCHNL
Lexel Block
LXLBLOCKWOODBK
Channel Sticker
LXLCHNLSTKR
POPLIST
May 2015
TECHNICAL DATA
Seals everything that goes
DANGER: Flammable. Turn off pilot lights and other ignition
sources. Do not use electrical devices such as switches, motors, etc.
Avoid using metal tools or objects, as they could cause sparks.
Seals
Leaks
the Asphalt
Can’t!
Seals Leaks
that
Asphalt
Can’t!
DESCRIPTION: Through the Roof!® is the clear, ultra-elastic sealant
made to permanently stop and prevent roof leaks. It effectively seals
around a variety of roof fixtures without the messy look of asphalt.
Plus, Through the Roof! won’t dry hard and crack like traditional
asphalt repair products, and lasts 20 times longer! It expands and
contracts with temperature changes, leaving you with a repair that
sticks but won’t stick out. Conforms to ASTM C794.
WHERE TO USE: Around common roofing fixtures, including:
• Galvanized metal and aluminum flashing
• PVC and ABS vent pipe, skylights, gutters, downspouts,
ductwork and vents
• Chimneys, brick, block and mortar
• Glue down shingles and front edges of flat roof tiles
(cedar shake, asphalt, cement, slate and glazed tile)
• Metal RV roofs
• Rubber roof membranes (may warp)
• Roof jacks, cables and air conditioning units
PAINTABILITY: With latex paint/stain after 24 hrs. or oil-based
paint/stain after 1 week.
FEATURES
Elastomeric with powerful adhesion – stretches, won’t tear,
crack or pull away
Ultra clear
Excellent UV resistance
Lasts 20 times longer than asphalt
Can be applied to wet surfaces & immediately exposed
to rain or snow
ADHERES TO: Most building materials including:
Metals - Aluminum • Brass • Steel • Copper • Silver
Plastics - ABS • Vinyl • Lexan®* • Polycarbonate • PVC
• Fiberglass • Nylon • Acrylic sheet/Plexiglass
Other Surfaces - Asphalt • Brick • Ceramic Tile • Concrete • Stone
• Mortar • Stucco • Polyurethane • Glass • Terra Cotta • Cement
• Wood • Cloth/Canvas • Polyisobutylene • EPDM rubber (may wrinkle)
COLOR: Clear
PACKAGING:
• Cartridge grade: 10.5 oz. cartridges
• Brush grade: 1 quart and 1 gallon containers
• Brush grade: 1 quart and 1 gallon VOC compliant containers
COVERAGE: A 10.5 oz. cartridge will cover approx. 30 lineal feet with
a ¼” (6mm) bead. A quart can will cover approx. 3 sq. ft. at 1/8” thick.
* Lexan® is a registered trademark of its respective owner.
BENEFITS
Eliminates costly call backs and re-work
Blends in with roof, won’t stick out
Goes on clear, stays clear
Costs much less over time, no re-dos
Apply in almost any weather
Adheres to most existing roof patches
No extra work to remove old patches
Have confidence that you’re using the right product
Paintable
Unlike silicone, paint sticks
Won’t freeze
Water & mildew-resistant
High durability
Full 10.5 oz. in every cartridge
Waterproof
No wasted caulk in cold weather
Less waste, less mess
Long lasting
Performs well in most any type of climate
More for your money
Instantly stops leaks in standing water & cold temps
TRFDATATEC
First Aid:
The Results
are Clear!
If you experience difficulty breathing, leave the area to
obtain fresh air. If continued difficulty is experienced, get medical
assistance immediately. In case of eye contact, flush immediately with
water for 15 minutes and get medical attention. In case of skin contact,
wash thoroughly with citrus-based cleaner. Remove contaminated
clothing and wash right away. Call doctor if skin irritation persists.
If swallowed, get medical attention immediately. Do not
induce vomiting.
PROPERTY
Color:
Packaging:
Joint Size:
Paintability:
Clarity (NTU):
Application Range:
Service Range:
Tensile Properties:
PROPERTY
Slump
Cartridge grade - < 13; Brush grade - < 15
0°F to 120°F (-18°C to 49°C) surface temperature
-25°F to 180°F (-34°C to 82°C)
Cartridge - Recovery
at 50% stretch: 96% in 1 minute
RESULTS
10.5 cartridges come with Sashco’s unique Alyster plunger.
A flexible telescopic diaphragm not only stops material flow,
it actually pulls material back into the nozzle!
• Tight Seal – Increases shelf life and minimizes leakage.
• Stop Flow – The flexible telescopic
diaphragm assures that material flow will
stop when caulk gun pressure is released.
Seals Leaks that Asphalt Can’t!
TEST METHOD
Hardness, Shore A
(21-day cure)
Cartridge - 35;
Brush - 33
Solids
Cartridge: 55.9% by wt.
Brush: 36.1% by wt.
Low VOC brush: 45.2% by wt.
Extrusion Rate
Cured
ASTM C661
Cartridge - < 1/8”
Brush - slumps
ASTM D2202
Cartridge - 80 g/min
(1/8” orifice at 40 psi)
Brush grade - N/A
ASTM C603
1 week (dependent on
temperature, humidity and
Tack-free
bead
size/thickness)
Also
available
in 10.5 fl. oz. cartridges,
gallon
cans, low VOC quart cans,
30 minutes
and low VOC gallon cans.
Low Temp. Flexibility Pass
Alyster Plunger
Seals everything that goes
Cartridge - up to 2” wide; Brush grade - N/A
With latex paint/stain in 24 hours or oil-based
paint/stain after 1 week
Cartridge: 390 g/L
Brush: 524 g/ L
Low VOC brush: <300 g/L
This product contains a material which is known by the
State of California to cause birth defects or reproductive harm.
For a detailed description of the warranty and exclusions, please
visit our website at www.sashco.com.
10.5 oz. plastic cartridge, 1 quart and 1 gallon
containers
at 100% stretch: 96% in 1 minute
and prolonged occupational overexposure to solvents can lead to
permanent brain and nervous system damage. Intentional misuse by
deliberately concentrating and inhaling the vapors from this product
may be harmful or fatal.
Limited Lifetime Warranty Sashco warrants this product will
substantially meet published specifications on the date of sale. If it
fails to do so, return unused portion with original sales receipt for
replacement or refund, at Sashco’s sole option. These are purchaser’s
sole and exclusive remedies for any breach of warranty. Purchaser
must determine suitability of product for purchaser’s specific needs
and assumes all risk associated with its use.
VALUE
Clear
Brush - Recovery
at 50% stretch: 100% in 3 minutes
at 100% stretch: 96% in 5 minutes
In retail market tests, the clear container
increased sales of all Through The Roof!®VOC
KEEP OUT OF REACH OF CHILDREN! Refer to the MSDS for
merchandised
together.
this productSKUs
as needed. when
Notice: Reports
have indicated that repeated
WARNING:
Limited Lifetime Warranty
Exclusive stop-flow plunger
Vapor harmful. Harmful or fatal if swallowed. Call
physician immediately. Contains toluene and other petroleum distillates.
Keep away from heat, open flame and chimney embers. When using,
do not eat, drink or smoke. Use only in a well-ventilated area. May be
harmful if inhaled. May affect the brain or nervous system causing
dizziness, headache, or nausea. Avoid breathing vapors. Keep container
tightly closed when not in use.
Typical Properties
Freeze-Thaw Stable
Adhesion-in-peel
Passing Substrates
Won’t freeze
See “ADHERES TO”
section inside this brochure
ASTM C1250
Vents
Shingles
ASTM C679
ASTM C679
ASTM C734
ASTM C731
ASTM C794
SPECIFICATIONS:
• Meets FHA requirements.
The data reported here is believed to be reliable. No warranty is made
concerning its accuracy of the results obtained from its use.
Gutters
•
•
•
•
•
Flashing
Clear waterproof sealant
Repels water immediately
Can be applied in cold temperatures
Highly elastic – will not crack
Expands & contracts with temperature
changes
TRF 002 12-14
10300 E. 107th Place
Brighton, CO 80601
800-767-5656
www.sashco.com
Keep up with Sashcoinc on:
Clear Quart Packaging Sheet
TRFCLRQTPKG
Product Brochure
TRFBROCH
Channel Strip
TRFCHSTRIP
Through the Roof! Block
TRFBLOCKGRYBK
Channel Sticker
TRFCHNLSTKR
POPLIST
May 2015
TECHNICAL DATA
La
be Ne
lD w
es
ign
!
Looks Like Mortar – Stretches Like Rubber
DESCRIPTION:
Forget the concrete powder, mix bucket, &
big trowel. Just squeeze in Mor-Flexx to repair
crumbly mortar, cracked stucco, or textured
walls. It’s simple, it’s fast, it works. Mor-Flexx
may look like mortar and stucco but it stretches like rubber, staying elastic year after year.
Mor-Flexx cleans up easily with water. No
extra chemicals needed. It’s paintable so you
can match the color to your surface, and its
texture mimics that of real mortar and stucco.
ADHERES TO: (all conform to ASTM C794)
Metals
•Aluminum
•Steel
•AnodizedWindows
•Brass
Plastics
•PVC
•Vinyl
Other Surfaces
•Tile
•CinderBlock
•Wood
•Mortar
•Stucco
•Concrete
•Brick
•Stone
•FiberCement
•EIFS
•Drywall
FEATURES
WHERE TO USE:
Whereatextured,mortarlookisdesired.
COLORS:
•Beige
•Gray
PACKAGING:
COVERAGE:
A10.5oz.cartridgewillyieldapprox.
26 lineal feet with a ¼” (6 mm) bead.
PAINTABILITY:
Withexteriorlatexpaintsafter4hours(will
take longer in cool, humid conditions).
Allow1weekdryingtimebeforeapplying
oil-based paints, sealers, or stains. Some
interiorandexteriorlow-end,flatlatex
paints may crack over Mor-Flexx, so test
inaninconspicuousareafirst.
•Textured
Blendsinwithstucco,mortarorgrout
Stayswhereit’sapplied
•Water-based
Easytotoolandclean-up
Moreforyourmoney
• Bright, clean package design
helps product stand out on
the shelf
Simply thaw and apply, no wasted product
the right product
•Highdurability
• Available in Gray or Beige
• Textured to match mortar,
stucco & concrete surfaces
Easytomakethefixdisappear
•LowVOC
• Now front & center:
Sashco, Products That Work
• Paintable
•Useinjointsupto3”widewithnoslump
•Freeze-thawstable
Samegreatformula!
BENEFITS
•Elastomericwithpowerfuladhesion
- stretches, won’t tear, crack or pull away
•Paintable
CheckOuttheNewLabel!
• Mor-Flexx may look like
mortar, but it stretches like
rubber, staying elastic year
after year
MeetsstrictestVOCrequirements;
environmentally friendly
Performswellinmostanytypeofclimate
Lesswaste,lessmess
• It’s simple, it’s fast, it works
• Get more!
10.5 fl. oz. of product
800-767-5656•www.sashco.com
FLXPKG3-15
FLXDATATEC
New Packaging Sheet
FLXPKG
Product Brochure
FLXBROCH
Channel Strip
FLXCHSTRIP
Mor-Flexx Block
FLXBLOCK
Channel Sticker
FLXCHNLSTKR
Color Card
FLXCLRCARD
POPLIST
May 2015
TECHNICAL DATA
First Aid: EYES: Immediately flush with large quantities of
water for at least 15 minutes. If irritation persists, see a medical
doctor. SKIN: Wash with soap and water and rinse thoroughly.
Wash contaminated clothing before use. INHALATION:
Remove to fresh air. INGESTION: If large quantities are
swallowed, DO NOT INDUCE VOMITING - seek medical
help immediately. Keep out of reach of children. Refer to the
MSDS for this product as needed.
COLORS:
DESCRIPTION:
WARNING: This product contains
crystalline silica sand,
• Gray
Slab® is the concrete crack repair sealant
which
is known
by the State of California to cause cancer.
you’ve been
waiting
for.
Some concrete repair products are tough, but PACKAGING:
Lifetime
Sashco
warrants
this product
• 10.5 oz.
plastic cartridges
don’t stick,Limited
while others
are flexibleWarranty
but don’t
last. Slab combines
the durability,
flexibility
will substantially
meet
published specifications on the date of
COVERAGE:
and adhesion
for to
lasting
concrete
sale.you
If need
it fails
do so,
return unused
portion with original
One cartridge
will cover
approx.
26 lineal
crack repairs.
This
easy-to-apply,
100%
sales
receipt
for replacement
or refund,
at Sashco's
sole
option.
feet with a 1/4” (6mm) bead.
acrylic latex water-based product is textured
These are purchaser's sole and exclusive remedies for any
to simulate concrete so repairs blend in. Plus,
breach
of warranty.
Purchaser must
determine suitability of
PAINTABILITY:
Slab contains
no isocyanates
or solvents,
product
for
purchaser's
specific
needs
and
assumes
all
risk
With
latex
paint/stain
after
24
hours
or
which means it’s easy on your nose and on
not bepaint/stain
liable forafter
direct
or cure
oil-based
complete
our planet.associated with its use. Sashco will
(1-3 weeks, depending on bead size,
indirect damages.
temperature & humidity)
WHERE TO USE:
Repair large
or small
concrete,
brick
Except
ascracks
statedinabove
there
are no warranties for this product.
or stone on:
The foregoing express warranty is in lieu of all other warran• Sidewalks
• Garages & Sheds
ties, express
or implied, including without limitation implied
• Driveways
• Patios
warranties of merchantability or fitness for a particular
whichtowarranties
ADHERESpurpose,
TO: (all conform
ASTM C794)are specifically excluded and
• Asphalt*
• Brick This•Limited
Mortar Warranty gives you specific legal
disclaimed.
• Concrete
Stonemay •have
Stucco
rights.• You
other rights which vary from state to
• EIFS state. •Some
Wood states
• Cinder
do notBlock
allow exclusion of implied warran-
*Be aware thatties
asphalt
a weak substrate.
will hold
its seal,limitations
but the asphalt may
to itself of
over time.
inisconsumer
orSlab
other
sales,
onlose
theadhesion
duration
implied warranties, or exclusion or limitation of incidental or
FEATURES
consequential damages. Thus, theBENEFITS
limitations or exclusions
contained
above
may
not apply toEliminates
you depending
upon your
• Extremely
elastic in most
temps
– moves,
frequent repairs
won’t crack,
even when
cold
specific
circumstances.
• Powerful adhesion
Won’t tear or pull away
• Spans gaps up to 3” wide with no slump
Stays where it’s applied
Alyster Plunger
• High durability
10.5 oz.
• Water based
•
•
•
•
•
Performs long-term in most climates
cartridges come with Sashco’s
Alyster
Easy to unique
tool and clean
up
plunger. A flexible telescopic diaphragm not only stops
Ultra low VOC, no isocyanates
Meets strictest VOC requirements (including
material flow, it actually pulls material
back into the nozzle!
southern CA); environmentally friendly;
• Tight Seal
Increases
no –
harsh
chemical shelf
smells life and
minimizes leakage.
Freeze-thaw stable
No wasted caulk in cold weather
• Stop Flow – The flexible telescopic
Exclusive stop-flow plunger
waste, that
less mess
diaphragmLess
assures
material flow
Full 10.5 oz. in every cartridge
More for
your money
will stop when
caulk
gun pressure is
released.
Have confidence that you’re using the right
Limited Lifetime Warranty
Typical Properties
PROPERTY
VALUE
Color:
Gray
Joint Size:
Maximum 3” wide
Note: Use appropriate size pre-caulking filler rope
(backer rod) in any joint 1/2” deep or more.
Packaging:
Paintability:
10.5 oz. plastic cartridges
With latex paint/stain in 24 hours or oil-based
paint/stain after complete cure (1-3 weeks,
depending on bead size, temperature & humidity)
Application Range:
40°F to 120°F (4°C to 49°C) surface temperature
Tensile Properties:
Recovery at 50% stretch: 96% in 1 minute
Recovery at 100% stretch: 96% in 1 minute
Service Range:
Max Elongation:
VOC
PROPERTY
Hardness, Shore A
-30°F to 250°F (-34°C to 121°C)
300%
<1.5 by weight, 58 g/L, CA compliant
RESULTS
TEST METHOD
32 (21-day cure)
ASTM C661
Slump
< 1/8”
Extrusion Rate
750 g/min. (1/8‘ orifice at 40 psi)
Solids
Cured
Tack-free
ASTM D2202
78% by wt.
ASTM C1250
1 week (dependent on
temperature, humidity and
bead size/thickness)
ASTM C679
less than 30 minutes
Low Temp. Flexibility Pass (not artificially weathered)
Freeze-Thaw Stability Passes 10 cycles
0°F to 70°F (-18°C to 21°C)
Adhesion-in-peel
Passing Substrates
See “ADHERES TO”
section inside this brochure
ASTM C603
ASTM C679
ASTM C734
ASTM C731
ASTM C794
SPECIFICATIONS:
• Meets or exceeds Federal Specification ASTM C834, TT-S-00230 C
The data reported here are believed to be reliable. No warranty is made
concerning the accuracy of or the results obtained from their use.
Check out other high-performance Sashco products.
From chimney to foundation, the best wood stain & sealant solutions.
product
SLB 002 09-14
Brighton, CO 80601
800-767-5656
SLBDATATEC
www.sashco.com
• Superior adhesion & ﬂexibility –
won’t crack or pull away
• Color-matched to concrete
• Easy water clean-up
Product Brochure
SLBBROCH
Sidewalks
Driveways
Expansion Jioints
Slab Block
SLBBLOCK
Channel Strip
SLBCHSTRIP
Channel Sticker
SLBCHNLSTKR
Slab Putty Knife
16555
POPLIST
May 2015
Quick Shake-G/O Sell Sheet
XCTQSGO
TECHNICAL DATA
™
TYPICAL PROPERTIES:
Property
Value
DESCRIPTION:
eXact color™ is the easiest and fastest way
to create a custom color caulk. This 100%
water-based acrylic latex sealant requires no
special tools. Simply mix in any latex paint,
stain or universal pigments and apply in
joints up to 1/2” wide to get an exact match.
WHERE TO USE:
Interior applications, including:
•Walls
•Wallpaper
•Tile
•Backsplashes
•Woodorvinylmolding&baseboards
ADHERES TO:
(all conform to ASTM C794)
Metals
•Aluminum
•Brass
•Steel
•AnodizedWindows
Plastics
•ABS
•Lexan®* •AcrylicSheet
•Plexiglass
•PVC
•Fiberglass
•Urethane
•Vinyl
•Polycarbonate
•Polystyrene •Nylon
Other Surfaces
•Drywall
•Tile
•CinderBlock
•Wood
•Formica®*
•Corian®*
•Glass
•Mortar
•FiberCement
•Stucco
•Brick
•Concrete
•Stone
•EIFS
COLORS:
Infinitepossibilities.Simplymixinanylatex
paint, stain or universal pigments.
9.5 fl. oz. plastic cartridge (final yield after
eXact color Quick Shake–G/O forPackaging
Gyroscopic/Oscillating
Mixer
mixing), 1 activator pack, 1 measuring
PACKAGING:
9.5oz.plasticcartridges(finalyield
after mixing), 1 activator pack, 1
measuringsyringe,1nozzle,1clearcap
Tintable Caulk. Just Add Paint.
FEATURES:
•Unlimitedcoloroptions,evenmetallics!
Just add latex paint
BENEFITS:
An exact match every time
•Nospecialtoolsrequired
Allyouneedisinonekit
•Water-basedacrylic
Easytotool&clean-up;
environmentally friendly
•Easytouse
•Superelasticwithpowerfuladhesion
Won’tpullawayorcrack
Mixin3minutes,usein30–savetime
XCTDATATEC
-30˚F to 250˚F (-34°C to 121°C)
Tensile Properties
Recovery at 50% stretch: 100% in 3 minutes
Recovery at 100% stretch: 96% in 5 minutes
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
VOC
holderwhenmixingfewerthan
7 cartridges
79.4 g/L, <1.5% by weight
(once the activator is added to the sealant base)
• pH of sealant base before use: 6.7
• pH of activator: 12
• pH of mixed sealant ~8.5 (depending on pH
of paint or stain added to sealant base)
Viscosity
8.6 lbs./gal.
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
TEST DATA:
Property
Easy to Use:
1 Placecartridgesinthemolded
Alyster Plunger
✓
✓
✓
✓
Results
Durability
Test Method
12.5% joint movement
(10 cycles @ -15°F (-26°C))
ASTM C719
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Hardness, Shore A
33 (21-day cure)
ASTM C661
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ASTM D2202
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2 Pop tops off the cartridges
Solids
A flexible telescopic diaphragm not
3 Injectpaintwithsuppliedsyringe,
only plastic
stops material flow, it actually
Made of schedule 80
PVC
twistoncaps
55.6% by weight (of sealant base) ASTM C1250
59.7% by volume
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Extrusion Rate
750 g/min (1/8” orifice at 40 psi)
ASTM C603
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Freeze-Thaw Stability 3 cycles max at 0°F. No
freeze/thaw stability at -15°F.
Keep from freezing
pulls material back into the nozzle!
1 solid holder with cavities for up
4 Placeshelf
molded
top of
cartridges
• Tight Seal—Increases
life and
minimizes
leakage.
to 7 cartridges
• Stop Flow—The flexible telescopic diaphragm assures
5 Mixfor1-2minutes
material flow will stop when caulk gun pressure is
1that
fiber-reinforcedneoprenev-cap
released.
6 Replacemoldedtoponcartridges
with
Velcro straps
ASTM C731
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Low Temp. Flexibility Pass (not artificially weathered) ASTM C734
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Tack-free
Less than 30 minutes
ASTM C679
Cured
4-5 days (dependent on temp.,
humidity and bead size)
ASTM C679
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
8 Mixfor1-2minutes
stripsVelcroself-adhesivehook
2
Limited
Lifetime Warranty
materialforattachmenttothe
Sashco
warrants this product will substantially meet
metalmixerbasket
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Adhesion-in-peel** Concrete • Glass
Passing Substrates PVC • Wood • Tile
ASTM C794
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Voila! eXact color Sealant
** Not comprehensive. Contact Sashco with questions about other substrates.
published specifications on the date of sale. If it fails to do
6blackweightedcartridges
so,
return unused portion with original sales receipt for
SPECIFICATIONS:
tobeusedforbalancingthe
replacement
or refund, at Sashco’s sole option. These are
holderwhenmixingfewer
• Meets the performance requirements of ASTM C834
purchaser’s
sole and exclusive remedies for any breach of
• Meets or exceeds Federal Specification TT-S-00230 C
than7cartridges
warranty.
Purchaser must determine suitability of product
for purchaser’s specific needs and assumes all risk associ800-767-5656 • www.sashco.com
Mixasmanyas7cartridgesoras
ated with its use. Sashco will not be liable for direct or
The data reported here is believed to be reliable. No warranty is
EXTQSGO2-15
fewasone
made concerning the accuracy of or the results obtained from
indirect
damages.
its use.
Mixmultiplecolorsallatonetime
For
a detailed description of the warranty and exclusions,
please visit our website at www.sashco.com.
*McKanica® and Kynar® are registered trademarks of their
respective owners.
KEEP OUT OF REACH OF CHILDREN.
Easy to Use:
1
2
3
4
5
6
7
8
Tintable Color Caulking –
Just Add Paint!
< 50,000 cps. (sealant base before thickened)
Density of sealant base
bottomslots
9.5 oz.
cartridgesShake–V
come with a
eXact color
Quick
for Vortex
Shaker
Slump
< 1/8”
unique Alyster plunger.
✓
✓
sealant
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
✓
Description:
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
✓
✓
40˚F to 90˚F (4°C to 32°C) surface temp.
Service Range
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Carefully handle the activator! Keep away from skin
and eyes. If skin or eye
contact occurs, flush with large
Mixasmanyas7cartridgesor
amounts of water. Once
the activator is mixed into the
asfewasone
sealant base it is safe for handling. Immediately discard
M
ixmultiplecolorsallatonetime
the activator packaging and keep away from children.
See the MSDS for additional details.
Lesswaste,lessmess
Maximum 2”
Application Range
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
✓
✓
✓
Caution
Joint Size
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Store eXact color® in
a cool, dry location. Once mixed,
6blackweightedcartridges
use any remaining product
within one year.
tobeusedforbalancingthe
WHERE NOT TO USE:
•Areasofwatersubmersionor
frequent, prolonged puddling
• Areaswithhighfootand/orvehicletraffic
(driveways, sidewalks, decks, patios, etc.)
•Roofsexposedtoprolonged
dampness (use Sashco’s Through
TheRoof!® instead)
• Willnotadheretoorisincompatible
with Kynar®*,Polypropylene,Waxes,
Polyethylene,andSilicone.
• MaydiscolorCopper
U.S.PatentNo.8,100,296andotherpatentspending
syringe, 1 nozzle, 1 clear cap
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Clean up any fresh product
on surfaces and skin with soap
Madeofglassreinforcednylon
and water. Flush the paint measuring syringe with soap
and water.
2pieces(bottom&top)
PAINTABILITY:
Withexteriorlatexpaintsafter4hours(will
take longer in cool, humid conditions). Allow
1 week drying time before applying oil-based
paints, sealers, or stains. Some interior and
exteriorlow-end,flatlatexpaintsmaycrack
over eXact color, so test in an inconspicuous
areafirst.
* Corian®, Lexan®, and Formica® are
registered trademarks of their respective owners.
sealant
Clean-Up Description:
& Storage
COVERAGE:
A9.5oz.cartridgewillyieldapprox.20lineal
feet with a 1/4” (6 mm) bead
XCT002 4-14
ApplyVelcrostripstopailholder
InserteXactcolorcartridgesintothev-holder
Brighton, CO 80601
www.sashco.com
800-767-5656
Poptopsoffthecartridges,injectpaintwithsuppliedsyringe,twistoncaps
Placev-capoverthecartridges,securetheVelcrostraps
Placev-holderintothepaintbasket
Spinfor1-2minutes
Twist off caps, add activator, replace caps
Spinfor1-2minutes
Product Brochure
XCTBROCH
Voila! eXact color Sealant
EXTQSV2-15
Quick Shake-V Sell Sheet
XCTQSV
Moulding
Backsplashes
Anywhere to
match color
Channel Strip
Tintable Caulk
from the makers of Big Stretch ®
eXact color 3D Block
XCTCHNLSTRIP
XCT3DBLOCK
Backsplashes
Moulding
Walls
Don’t paint your caulk - tint it!
• Just add water-based paint or stain
®
www.sashco.com
800-767-5656
Channel Sticker
XCTCHNLSTKR
Shelf Card
(XCTSHFCARD)
POPLIST
May 2015
MildewFree Sealant
Maintenance
TECHNICAL DATA
ASTM C-794 Adhesion-in Peel Data
As you just read earlier in the Mildew Facts section, mildew
grows on surfaces as thin as a buildup of soap film. If you
don’t clean off this film, mildew can grow on the film itself!
To avoid this, each time that you scour your tub, use Clean
Shower™ or similar products to clean the caulk bead and
prevent soap film build-up.
Substrate
Pass or Fail
Aluminum
Pass
Cement
Pass
Ceramic Tile
Pass
Drywall
Pass
Porcelain
Pass
Fiberglass*
Pass
PVC
Pass
Formica
Pass
Slate
Pass
Glass
Pass
Vinyl Tile
Pass
MildewFree Sealant*
* Cured
is mildew resistant
Where
to sealant
use MildewFree
MildewFree has excellent adhesion to most bathroom and
kitchen materials, including:
DESCRIPTION:
MildewFree
• TileSealant* is a unique sealant
guaranteed to prevent mildew growth on the
• Glass
sealant for seven years. It’s the only sealant
• Drywall
that comes
with a guarantee that includes
labor •costs
if replacement is necessary. It
Marble
creates
a watertight seal and prevents mildew
• Granite
from forming on the sealant.
• Ceramic
• Porcelain
WHERE
TO USE:
Around common kitchen and bathroom
fixtures, including:
• shower surrounds, bath tubs and toilets
• resetting tiles
• back splashes and sinks
Other Surfaces
• Glass
• Granite
• Porcelain
• Formica®**
• Drywall
• Ceramic tile
COLORS:
• White
• ABS
• Vinyl
• Acrylic Sheet
Warranty
• PVC
• Plexiglass
• Fiberglass (uncoated)
*
Substrate
Pass or Fail
Granite
Pass
Marble
Pine
Pass
Pass
* Uncoated Fiberglass Only
• Marble
• Cement
• Wood
• Slate
• Corian 1®**
Typical Properties
Packaging/Colors: 6 oz. squeeze tubes, White and Linen
Application Range: Surface temperature of 40ºF to 120ºF
(4ºC to 49ºC)
• Linen
Service Range: 0ºF to 250ºF (-18ºC to 121ºC)
Specifications: Meets FHA requirements. Meets or exceeds Federal
Specification ASTM C-834
PACKAGING:
• 6 oz. squeeze tubes
Where not to use MildewFree
• Sink Drains
ADHERES TO: (all conform to ASTM C-794)
• Tub Drains
• Swimming Pools
Metals
• Hot Tubs • Brass
• Aluminum
• Steel
• Saunas
Plastics
• Copper Fixtures
Solids: 77% by weight
COVERAGE:
A 6 oz. tube will cover approx. 16 lineal Tack-free (ASTM C-679): 30 minutes
feet with a ¼” (6 mm) bead which is
Paintability: within 4 hours with water-based paints. Wait 1 week
equal to one average tub enclosure.
when using an oil-based paint.
Water exposure: 24 hours (minimum)
PAINTABILITY:
Paintable with latex paints/stains after 4
Full cure: 4-5 days (dependent on temperature, humidity & bead size)
hours (more for humid conditions). Paintable with most oil-based paints/stains Freeze-thaw Stability (ASTM C-731): Passes 10 cycles 0ºF to 70ºF
(-18ºC to 21ºC)
after 1 week.
Maximum Stress (psi): 128
** Corian1® and Formica® are registered
Elongation to Break (%): 200
Guaranteed for 7 Years to Prevent Mildew Growth on the Sealant: If mildew
growth occurs on the sealant (not on soap film), within 7 years of purchase,
Sashco will replace the product and provide a contractor for re-installation.
Proof of purchase is required. Warranty applies toBENEFITS
single family residential
FEATURES
use only. No other warranties are expressed or implied. Sashco will not be
• 7 year replacement
warranty,damages other thanHaving
confidence
responsible
for consequential
as stated
above. that you’re using
including labor costs
the right product; added value for
Sashco warrants this product will substantially meet
published
specifications
client
at no cost
to you
on the date of sale. If it fails to do so, return unused portion with original sales
• Resistant
to damage from
abrasive
any cleaner
without
worry
receipt
for replacement
or refund,
at cleaners
Sashco’s soleUse
option.
These are
purchaser’s
sole
and exclusive
remedies
Purchaser
must
deter-fixtures
• Maintains
a water-tight
sealfor any breach of warranty.
No moisture
getting
behind
mine suitability of product for purchaser’s specific needs and assumes all risk
to cause problems
associated with its use.
Hardness, Shore A (ASTM C-794): 55
VOC: <4%, 67 g/L
Boeing Slump (ASTM D-2202): <1/8”
The data reported here are believed to be reliable. No warranty is made
concerning the accuracy or the results obtained from their use.
• Water-based
Easy to tool and clean up
Except as stated above there are no warranties for this product. The foregoing
• Low VOC
Meets
strictest
requirements;
express
warranty is in lieu of all other warranties,
express
orVOC
implied,
environmentally
friendlyor
including without limitation implied warranties
of merchantability
fitness
forpaintability
a particular purpose, which warranties
are specifically
• Superb
Compatible
with latexexcluded
and most
and disclaimed. This Limited Warranty gives you specific legal rights. You
oil-based paints and finishes
may have other rights which vary from state to state. Some states do not allow
• Elastomeric
with powerful
adhesion
–
Eliminates
costly call backs
exclusion
of implied
warranties
in consumer
or other
sales, limitations
on
thestretches,
duration won’t
of implied
exclusion or limitation of incidental or
tear, warranties,
crack or pulloraway
consequential damages. Thus, the limitations or exclusions contained above
may not apply to you depending upon your specific circumstances.
10300 E. 107th Place, Brighton, CO 80601
1-800-289-7290 • www.sashco.com
M DF002 02-10
Product Brochure
DEWDATATEC
DEWBROCH
®
Can you see the caulk?
ze-Thaw Stability (ASTM C-731)
es 5 cycles (0˚F - 70˚F)
Typical Properties
dness, Shore A (ASTM C-661)
21-day cure)
gation @ Break
%
ds (ASTM C-1250)
by weight, 71% by volume
k-Free Time (ASTM C-679)
than 1 hour
Wood was stained, then caulked.
Conceal Textured
Caulk for Wood
Where to use Conceal textured caulk delivers performance
stance to Substrate Staining (ASTM D-2203)
e
that’syou
hardwant
to see.toConceal’s
7 colors
Use Conceal® anywhere
match the
colorblend
andin with the
most popular stains used on log and wood homes, and
texture of your woodConceal’s
surface:light texture simulates the natural roughness
er Resistance
washout (4 hours, 40˚F, 50% relative humidity)
vere conditions - under 40˚F (4˚C) and/or 70%+
idity – full rain resistance may take longer. Cover
ior walls with plastic if rainfall is expected with4 hours after installation.
recommended for continuous submersion or
s exposed to foot or vehicular traffic.
thering
hout
king
oloration
of wood. The
combination
of color and
texture makes
• On wood siding, including
pine,
cedar, redwood
and
it hard to see where the caulking ends and the wood
many others
begins. Instead, they just blend together.
thetrim
caulking is hard to see, Conceal
• Around wood windowAlthough
and door
delivers performance. It outperforms all other textured
• Where wood sidingcaulks
meets
corneravailable.
boardsAdditionally, Conceal. . .
currently
with soap and water
• Where wood siding• Cleans
meetsupchimneys
• Is resistant to rainfall in 1-4 hours
or brick
• Has a limited lifetime warranty
None
None
Passes ASTM C-834
• Has superior elongation, memory and adhesion
Fundamental
• Areas of continuous
submersion Caulking
ce
co will test any stain to determine compatibility
Conceal. Call us for details.
Application
• Areas exposed to foot
or vehicularGuidelines
traffic
• Proper substrate preparation and application are
imperative for product longevity. Read this entire
Info Sheet
(CNL 002) before applying any product.
Limited Lifetime
Warranty
data reported here are believed to be reliable.
warranty is made or implied concerning the
racy or the results obtained from their use.
• Conceal
not a chinkingmeet
and should
be used in
Sashco warrants this product
willissubstantially
published
joints under 2” wide. If the joints are wider, we
specifications on the date of sale. If it fails to do so, return unused
recommend either Log Jam or Chinker’s Edge.
portion with original sales
receipt
for there
replacement
or refund,
at your
• Make
certain
is compatibility
between
Sashco’s sole option. These
and exclusive
stainare
andpurchaser’s
Conceal. We sole
recommend
Sashco’s
®/Cascade®, High Sierra®, or Transformation®
Capture
remedies for any breach of
warranty.
Purchaser must determine
stains for exterior
applications
and assumes
Symphony®
suitability of product for purchaser’s
specific
needs and
interior clear coat for beautiful long-term
all risk associated with itsprotection.
use. Sashco
notare
be obtained
liable forwhen
direct
Bestwill
results
Conceal
or indirect damages.
is applied to clean, stained wood. Call Sashco at
CONCEAL® COVERAGE RATES
t
h
LINEAL FT.
Per
5 gal. pail
Per
29 oz.
cartridge
Per
10.5 oz.
cartridge
1
1540
70.0
25.7
1
875
39.8
14.6
1
750
34.1
12.5
410
18.6
6.8
280
12.7
4.7
195
8.9
3.3
Recommended
Joint Depth
/4”
/4”
/4”
/8”
3 ”
/8
1 ”
/2
3
1-800-767-5656 for guidance.
Except as stated above• there
warranties
this product.
Checkare
theno
weather
forecast.for
Finishing
products are
best applied
moderate
weatherwarranties,
conditions, i.e.,
The foregoing express warranty
is ininlieu
of all other
out of direct
sunlight,limitation
in dry, warmimplied
conditions.
express or implied, including
without
• Check the surface temperature. It should be
warranties of merchantability or fitness for a particular
between 40˚-90˚F (4˚-32˚C).
purpose, which warranties
specifically
and
disclaimed.
• Itare
is always
best toexcluded
use a bond
breaker
(usually
This Limited Warranty gives
you
specific
legal rights.
Youstrongly
may recombacker
rod)
before caulking.
Sashco
mends
the state
use oftobacker
especially
if the home
have other rights which vary
from
state.rod,
Some
states do
is new and/or
the wood
is subject to or
significant
not allow exclusion of implied
warranties
in consumer
other
movement. If a bond breaker is not used, expect
sales, limitations on the duration
of
implied
warranties,
or
exclusion
more caulking repairs.
or limitation of incidental
or consequential
Thus,
the with the
• Tool
Conceal to helpdamages.
ensure good
contact
surfaces.
Thismay
willnot
greatly
aidtoadhesion.
limitations or exclusions wood
contained
above
apply
you
• Ideal caulk
depth is half of the joint width, but no
depending upon your specific
circumstances.
less than 1/4” and no more than 1/2”.
CNL003 04/12
11-11
Info Sheet
CNLDATATCH
- Backer rod
Property
- Caulking guns
Results
Test Method
1100 g/min
(1/8" orifice at 40 psi)
ASTM C-603
Wood siding
Anything wood
Textured Caulk for Wood
- Trowels, spatulas, or foam brushes for tooling
25% total joint
- Clean water and rags
(10
ASTM C-719
movement
- Plastic sheets to cover
the caulking if wet
weather moves in cycles at 15°F)
- Staple gun
& staples
(if (21
necessary
to help withASTM C-661
day cure)
Hardness,
Shore
A 20
backer rod installation)
ASTM D-2202
Slump
"
<1/8about
• If you have any questions
application, watch
our application videos 73%
at www.sashco.com
or call
by weight
ASTM C-1250
Solids
us call us at 1-800-767-5656.
Durability
Extrusion Rate
Where not to use Conceal
Baseboards
Colors: Frontier Gold, Harvest Wheat, Gold Tone, Red Tone, Brown
Tone, Redwood, Grizzly Brown
Packaging: 10.5 oz. cartridges, 29 oz. cartridges and 5 gal. pails
Joint size: Up to 2" wide
Paintability: With latex paint/stain in 24 hours or oil-based paint/
stain after 1 week
Application Range: Surface temp of 40°-90°F (4°C-32°C)
Service Range: -30°-250°F (-34°-121°C)
Tensile Properties: At 50% stretch: 100% recovery in 1 min.
At 100% stretch: 96% recovery in 1 min.
• Assemble
and equipment:
VOCs:
<1.5%tools
by weight,
max.
Surface Preparation
(dependent
1 week
Best results are obtained
when
Conceal is applied
on temperature,
to wood that has been previously
coated with a comASTM C-679
Cured
humidity
bead
patible and thoroughly cured
stain. and
In fact,
Conceal
size/thickness)
has a Limited Lifetime Warranty
when applied over
any of Sashco’s stains: Capture
Log 1Stain,
Less than
hourHigh Sierra
ASTM C-679
Tack-free
or Transformation. Call us for details on this special
(not artificially
Low
Temp.
warranty
– the best in thePass
industry!
ASTM C-734
Flexibility
If not using a Sashcoweathered)
stain, be sure to confirm
its compatibility with Conceal.
stain is older
PassesIf10the
cycles
but still intact, clean the wood surfaces thoroughly to
Freeze-Thaw
(0°-70°F)
ASTM C-731
remove dirt, pollen, bird droppings, and other
Stability
surface contaminants. (-18° -21°C)
The USDA Forest Products
Woods Laboratory
— cedar, and other
researchers around the world
have recently
reported
redwood,
pine and
that surface wood exposed
to sunlight
for as little as
similar
woods,
1-2 weeks can become significantly
damaged and
Vinyl, Engineered
Adhesion-in-peel
unsound which may leadwood,
to premature
adhesive ASTM C-794
Metals,
Passing
failure ofSubstrates
coatings. Such Stone,
surface Granite,
wood damage has
the potential to also hurt Marble,
Conceal’sBrick,
(or any caulk’s)
adhesion. Once bare wood
has been properly
Fiberglass,
ABS, cleaned
and prepped to remove unsound
Acrylicwood, stain should
be applied as soon as possible. Follow with
Specifications:
Conceal caulking.
• Meets
FHA
requirements
A few
stains,
especially those high in wax content
• orMeets
or exceeds
Federal
Specification
TT-S-00230
C
non-drying
oils, may
interfere
with adhesion.
Some
• ofASTM
C-834 can hurt any caulk’s adhesion—
these coatings
• whether
ASTM applied
C-920,before
Type S,
25, Use NT, M, A. Exceeds
or NS,
after Class
the caulk—so
we
advise
against
10%
weight
loss.their use. Check with Sashco if you
have
about
your particular
product.
The
data questions
reported here
are believed
to be reliable.
No warranty is made concerning the
Channel Strip
CNLCHSTRIP
• L
ightlytexturedto
blendinwithwood
• G
reatadhesion
andelasticity
• Worksgreatwith
anySashcostain
Channel Sticker
(CNLCHNLSTKR)
accuracy of or the results obtained from their use.
INFO SHEET
10300 E. 107th Place • Brighton, CO 80601
1
1-800-767-5656 • www.sashco.com
Product Brochure
CNLBROCH
Conceal Block
CNLBLOCK
Color Chart
CNLCLRCHRT
POPLIST
March 2015
g/L,lessthan1.5%byweight,max.
-Free Time
han30min.(70˚F,50%relativehumidity)
-Through Time
ks(1/2”thickness,70˚F,50%relativehumidity)
usion Rate
/min(1/8”orificeat40psi)
e-Thaw
s5cycles(0˚F-70˚F)
Sinceitsintroductionin1985,Log
Jamchinkinghasbeentherecognized
industry standard in elasticity, adhesionanddurability.Here’swhy:
•Log Jam moves with your logs and
sticks like no other, eliminating
costly repairs.
•Log Jam has superior early water
resistance. No more worrying about
that unexpected rain storm.
•LogJamwon’teatawayat
Styrofoambeadboard.Nomore
Log Jam holds its seal.
unsightly chinking lines that look
dented and deformed – just the rustic, traditional look of
mortar you want.
•Log Jam has been used on thousands of log homes
throughout the world. Backed by a limited lifetime guarantee,youcanbeconfidentthatyou’reusingtheright
product for your dream home.
ness, Shore A
gation @ Break
Competitive brand.
p
(max.)intestjoint(3.5”Hx¾”D)at70˚F
r Resistance
ashout(4hours,40˚F,50%relativehumidity)
vere conditions - under 40˚F(4˚C)and/or70%+humidity–full
esistancemaytakelonger.Coverexteriorwallswithplasticif
ll is expected within 24 hours after installation.
ecommended for continuous submersion or areas exposed to foot
hicular traffic.
hering
out
ing loration
None
None
PassesASTMC-834
When other chinking pulls away, leaving your home vulnerable to weather, air infiltration and insects, Log Jam is
still maintaining the tight seal it had when first applied.
e
owilltestanystaintodeterminecompatibilitywithJogJam.
all and send us a sample of the stain you want tested. Test results
ble in a minimum of 6 weeks.
Fundamental Chinking
Application Guidelines
ata reported here are believed to be reliable. No warranty is made or
ed concerning the accuracy or the results obtained from their use.
-Year Warranty
enappliedinaccordancewiththeDataTecsheetLJC002,
hcoSealantswarrantsLogJamforthefollowingitemsfor10
rs:1)Itwillnotpullawayfromlogsurfaces2)Itwillremain
sticandstretchupto100%(+/-50%)oftheoriginaljointsize.
og Jam fails to perform as specified above, return proof of purseandSashcowillfurnishproducttorepairthedamagedareas.
s warranty includes product replacement only. Labor costs for
lication of any product are specifically excluded. No other
rantiesareexpressedorimplied.Sashco,Inc.reservestheright
nspectthestructurepriortoanyproductreplacement.(Special
ormatchesexcluded.)ContactSashcoforinformationonthe
mited Lifetime Warranty.
Propersubstratepreparationandapplicationare
imperative for product longevity. Read this instruction
sheet,LJC002,beforeapplyinganyproduct.
1. Best results are obtained when Log Jam is applied to
clean, dry, stained wood. Make certain there is compatibility between your stain and Log Jam. Log Jam has
alifetimewarrantywhenappliedwithSashco’sstains:
CaptureLogStain/Cascadestainingsystem,High
Sierra,TransformationandSymphonyInteriorClear
Coat.Ifusingadifferentstainorfinish,contactSashco
forguidance.Call1-800-767-5656,orvisitandchatlive
at www.sashco.com.
2.Checktheweatherforecast.Finishingproductsarebest
applied in moderate weather conditions, i.e., out of
direct sunlight, in dry, warm conditions.
3.Checkthelogsurfacetemperature.Thesurfacetemperatureshouldbebetween40˚-90˚F(4˚-32˚C).
4. Install a bond breaker before Log Jam is applied. Backer
rod,GripStrip,andclearpackingtapeallperformthis
function well. If Log Jam is applied over white styrene
bead-board or Tyvek house wrap, it is best to cover the
bead-board or wrinkle-free house wrap with clear packingtape(topreventadhesiontothosematerials).Wedo
not recommend the use of blue or pink extruded poly-
05-14
styrene board as a bond breaker..
5. Gun the chinking over the backing material. Ideal sealant depth is half of the joint width, but no less
than 1/4”, nor more than 1/2”.
6. Tool Log Jam to ensure good contact with the log
surfaces, especially to the upper log; this will greatly
aid adhesion.
7. All chinking products may occasionally “blister”.
To avoid blistering:
•Donotapplyindirectsunlight.
•Protectfreshchinkingfromdirectsunlightfor1-2
days after application with white plastic sheeting
tacked over it.
•Fordetailedinformation,readSashco’sSavvy
Bulletin,“PreventingBlisters”.
Application
Surface Preparation
Best results are obtained when Log Jam is applied to
wood that has been previously coated with a compatible and thoroughly cured stain. In fact, Log Jam has a
Lifetime Limited Warranty when applied over any of
Sashco’sstains:CaptureLogStain/Cascadestainingsystem,HighSierra,Transformation,orSymphonyInterior
ClearCoat.Callusfordetailsonthisspecialwarranty—
the best in the industry!
If you select a different stain, make certain that it is
compatible with Log Jam. If the stain is older but still
intact, clean the log surfaces thoroughly to remove dirt,
pollen, bird droppings and other surface contaminants.
TheUSDAForestProductsLaboratoryandother
researchers around the world have reported that surface
wood exposed to sunlight for as little as 1-2 weeks can
become significantly damaged and unsound, which may
lead to premature adhesive failure of the stains or other
coatingsappliedtoit.ItcanalsohurtLogJam’s(orany
chinking’s)adhesiontothesurface.Oncebarewoodhas
been properly cleaned and prepped to remove unsound
wood,stainshouldbeappliedassoonaspossible.Follow
with Log Jam chinking.
If a stain is applied over Log Jam, it will be tinted
the stain color, but will be affected differently than the
surrounding wood; therefore, test appearance before widespread use.
INFO SHEET
1
Chinking
Color Chart
Log Jam Block
LJCBLOCK
LJCCLRCHRT
Info Sheet
LJCDATATEC
rdness (Shore A)
21-daycure)
ngation @ Break
%
d Wt.
8%
Log Builder® Caulk
k-Free Time
sthan1hour
All logs move, so Log Builder was specifically
designed to absorb most log movement. Most movement
occurs within the first few years, when logs lose the
majority of their moisture causing them to shrink and
the joints to expand. That’s why it’s crucial to use Log
Builder from the start. If the logs are extremely “green”
(with very high moisture content) it is often best to wait
several months before caulking. Log Builder is ultra-elastic, which means it will stretch and compress with normal
movement. It won’t crack, peel or pull away. Instead, it
creates a tight seal to keep water, dust, bugs and wind
from seeping into your home—for many years. Log
Builder is the smooth sealant for milled and hand-crafted
log structures.
in
ne
ter Resistance
washout (4 hours, 40˚F,50%relativehumidity)
evere conditions - under 40˚F(4˚C)and/or70%+
midity–fullrainresistancemaytakelonger.Cover
erior walls with plastic if rainfall is expected within 24
rs after installation. Not recommended for continuous
mersion or areas exposed to foot or vehicular traffic.
athering
shout
cking
coloration
None
None
PassesASTMC-834
Fundamental Caulking
Application Guidelines
ice
hco will test any stain to determine compatibility with
Builder. Just call and send us a sample of the stain
want tested. Test results available in a minimum of 6
ks.
data reported here are believed to be reliable. No
ranty is made or implied concerning the accuracy or
results obtained from their use.
• Propersubstratepreparationandapplicationareimperative for product longevity. Read this entire info sheet
(LBR 002) before applying any product.
• Makecertainthereiscompatibilitybetweenyour
stain and Log Builder. We recommend Sashco’s
Capture®/Cascade® or Transformation Stains® for
exterior applications and Symphony® interior clear
coat for beautiful long-term protection. Best results are
obtained when Log Builder is applied to clean, stained
wood. Call Sashco at 800-767-5656 for guidance if in
doubt.
• Checktheweatherforecast.Finishingproductsare
best-applied in moderate weather conditions, i.e., out
of direct sunlight, and in dry, warm conditions..
• Checkthelogsurfacetemperature.Thesurfacetemperatureshouldbebetween40˚F(4˚C)–90˚F(32˚C).
• Itisalwaysbesttouseabondbreaker(usuallybacker
rod) before caulking. Sashco strongly recommends the
use of backer rod, especially if the home is new and/or
the logs are subject to significant movement. If a bond
breaker is not used, expect more caulking repairs.
• ToolLogBuildertohelpensuregoodcontactwiththe
log surfaces, especially to the upper log; this will greatly aid adhesion.
• Idealsealantdepthis1/2ofthejointwidth,butno
lessthan1/4”andnomorethan1/2”.
•Assembletoolsandequipment:
- Backer rod
- Caulking guns
09-13
- Trowels, spatulas, or foam brushes for tooling
- Clean water and rags
-Plasticsheetstocoverthecaulkingifwet
weather moves in
- Staple gun & staples
• Ifyouhaveanyquestionsaboutapplication,please
call us before proceeding at 800-767-5656.
Surface Preparation
Best results are obtained when Log Builder is
applied to wood that has been previously coated with
a compatible and thoroughly cured stain. In fact, Log
Builder has a Limited Lifetime Warranty when applied
overanyofSashco’sstains:CaptureLogStainor
Transformation Stain.
If not using a Sashco stain, be sure to confirm its
compatibility with Log Builder. If the stain is older
but still intact, clean the log surfaces thoroughly to
remove dirt, pollen, bird droppings, and other
surface contaminants.
TheUSDAForestProductsLaboratoryandother
researchers around the world have recently reported
that surface wood exposed to sunlight for as little as
1-2weekscanbecomesignificantlydamagedand
unsound which may lead to premature adhesive
failure of coatings. Such surface wood damage has
the potential to also hurt Log Builder’s (or any caulk’s)
adhesion. Once bare wood has been properly cleaned
and prepped to remove unsound wood, stain should
beappliedassoonaspossible.Followwith
Log Building caulking.
A few sealers, especially those high in wax content
or non-drying oils, may interfere with adhesion. Some of
these coatings can hurt any caulk’s adhesion—whether
applied before or after the caulk—so we advise against
theiruse.CheckwithSashcoifyouhavequestionsabout
your particular product.
INFO SHEET
Log Builder Block
LBRBLOCK
Color Chart
LBRCLRCHRT
Info Sheet
LBRDATATEC
POPLIST
March 2015
Transformation Stain®
Log & Timber
r
Typical Properties
(Not to be considered specifications)
Colors:
Natural GoldToneLight GoldToneMedium
GoldToneDark RedToneLight RedToneMedium
RedToneDark
BrownToneLight
BrownToneMedium
BrownToneDark
Redwood
Packaging: 1 gallon and 5 gallon pails
r
Usage: Exterioronly
Coverage rate:
1stcoat:150-250sq.ft.pergallon
2ndandMaintenancecoats:300-500sq.ft.pergallon
(Aswithallstains,coveragewillvarydependinguponroughness
and porosity of the wood.)
VOCs:<250g/L
Application Range:
40˚F(4˚C)andrisingto90˚F(32˚C)andfalling.Insevereconditions(under40˚F(4˚C)and/or70%+humidity),fullrainresistance
may take longer. Protect surfaces with plastic sheeting if rainfall or
snowfallisexpectedwithin24hoursafterapplication.
Compatibility:
TransformationLog&Timberisrecommendedforusewithall
Sashco chinking and caulking products. Please contact Sashco for
details on other specific compatibility questions.
Dry Time:
Allowthefirstcoattothoroughlydryfor24hours(possiblylonger
in cold and/or humid weather). Once thoroughly dry, follow with a
lighter second coat. If desired, apply a third coat for a higher gloss.
(The first coat will soak in and appear somewhat flat. The second
coat should only be applied once the first coat is thoroughly dry in
ordertoensureproperfilmformationandUVprotectionfromthe
stain, as well as give it a light gloss.)
d
y
n
Viscosity:50-150centipose
Density: 8.0-8.5lbs./gal.
Solids: 60-65%byweight
Odor: Solvent, mothballs
Freeze-Thaw: Passes 5 freeze-thaw cycles
The data reported here are believed to be reliable. No warranty is
made or implied concerning the accuracy of or the results obtained
from their use.
-
Watch Helpful How-To Videos • Chat Live • Search FAQs
www.sashco.com
“A Better Way to Stain”
It‘s about Transformation: old and weathered logs
brought to life again, or timbers refreshed with color
when they were once only gray.
These are the results we want for our dream home,
but sometimes those results seem like a distant fantasy.
We’veseenotherlogandtimberhomesscorchedby
the sun and are afraid of the “big project” nature and
the hefty price tag of maintaining our own. Contrary to
common wisdom, having a great quality stain is only half
the battle. The other half is what is neglected the most:
routine maintenance. Over time, routine maintenance is
truly the key to easier and less expensive staining.
Whendoneevery3-5years,wefindthatroutine
maintenance saves a lot of time and money by eliminating much of the prep work before staining. Simply do
a light power wash, allow the wood to dry, and apply a
maintenance coat. No sanding or stain removal necessary.
Yourcontractorwillbehappyyoucalledhimsooner
rather than later, and your pocketbook will be, too. It’s
that simple.
UseaqualitystainlikeTransformationStain®Log
&Timberandyou’lltransformthelookofyourwood.
Practice routine maintenance, and you’ll discover a better
way to stain.
For Sashco’s complete guide on a better way to stain,
keepreading.You’llfindstep-by-stepinstructionsonthe
following key topics:
Sampling
Proper sampling is where it starts. It is critical because the same stain can look very different
on various species of wood. Different prep and
application methods will also affect the final result.
Therefore, sampling on your wood is the only way to
make sure you get the color you want the first time.
It’s easy: on a small, inconspicuous test area (we
recommend a minimum 2 sq. ft. space), simply do
each step the exact same way you will on all of your
logs and timbers.
• Prepthewood.
• Applythestain.
• Letthestaindry(bothbetweencoatsandafter
all coats are applied).
• Ifworkingwithacontractor,don’tallowthe
contractor to stain until you have thoroughly
discussed and demonstrated the look you want.
Show him/her the sample.
• Don’tstainallofyourlogsandtimbersbefore
you verify that you’re achieving the look you
want. It is best if you can be on-site when staining starts.
Sampling
To get the look you want, sample the stain on your wood.
Prep
Proper prep starts you down the right path.
Speak with Stain Experts
Mon-Fri, 6 a.m. – 5 p.m. MST
1-800-767-5656
TRN0023-12
Application
Proper application of a quality stain ensures long-term
performance.
INFO SHEET
Routine Maintenance
Reducelong-termcosts,timeandeffort.
www.sashco.com • 800-767-5656
Info Sheet
Product Brochure
& Color Chart
TRNDATATEC
TRNCLRCHRT
Log & Timber Stain Board
TRNBRD
Transformation Stain®
Literature
& POP
Stain Color
Fan Sales Tools
Siding & Trim
pical Properties
to be considered specifications)
ors:
ural
ar
d Tone Medium
Tone Medium
wn Tone Medium
wood
kaging: 1 gallon and 5 gallon pails
ge: Exterior/Interior
erage rate:
coat:150-250sq.ft.pergallon
andMaintenancecoats:250-350sq.ft.pergallon
withallstains,coveragewillvarydependinguponroughness
porosity of the wood.)
Cs:<250g/L
lication Range:
F(4˚C)andrisingto90˚F(32˚C)andfalling.Inseverecondis(under40˚F(4˚C)and/or70%+humidity),fullrainresistance
takelonger.Coversurfaceswithplasticifrainfallorsnowfallis
ectedwithin24hoursafterapplication.
mpatibility:
nsformation Siding & Trim is recommended for use with all
hco caulking & chinking products. Please contact Sashco for
ils on other specific compatibility questions.
Time:
stothetouchin30minutesorlessinidealweather.
osity:50-150centipoise
8.5-9.0
sity: 8.3-8.8lbs./gal.
ds: 18-22%byweight
r: Mild, sweet
“A Better Way to Stain”
It’s about Transformation: old and weathered wood
siding brought to life again, or trim stained with color to
create the perfect accent.
These are the results stain was made for, yet rarely do
we observe this in the real world. We see our neighbor’s
stain peeling or are reluctant to repair our own siding
due to its “big project” nature and the hefty price tag.
Contrarytocommonwisdom,havingagreatqualitystain
is only half the battle. The other half is what is neglected
themost:routinemaintenance.Overtime,routinemaintenance is truly the key to easy and inexpensive staining.
Whenappliedcorrectlyandmaintainedevery3-4
years, you can be assured that Transformation Stain®
Siding & Trim won’t peel. This eliminates the time and
expense of sanding the surface before applying a maintenance coat. Simply do a light power wash, allow the
wood to dry and apply another coat. It’s that easy, and
you’llfindthatyour“bigproject”wasn’tsobigafterall.
UseaqualitystainlikeTransformationSiding&
Trim and you’ll transform the look of your wood. Practice routine maintenance and you’ll discover a better way
to stain.
For Sashco’s complete guide on “a better way to
stain,”keepreading.You’llfindstep-by-stepinstructions
on the following key topics:
Sampling
Proper sampling is where it starts. It is critical because the same stain can look very different
on various species of wood. Different prep and
application methods will also affect the final result.
Therefore, sampling on your wood is the only way to
make sure you get the color you want the first time.
It’s easy: on a small, inconspicuous test area (we
recommend a minimum 2 sq. ft. space), simply do
each step the exact same way you will on all of your
siding or trim.
• Prepthewood.
• Applythestain.
• Letthestaindry(bothbetweencoatsandafter
all coats are applied).
• Ifworkingwithacontractor,don’tallowthe
contractor to stain until you have thoroughly
discussed and demonstrated the look you want.
Show him/her the sample.
• Don’tstainallofyoursidingortrimbeforeyou
verify that you’re achieving the look you want.
It is best if you can be on-site during the staining
process.
Siding Fan POP
TRWFAN
Sampling
eze-Thaw: Passes 5 freeze-thaw cycles
To get the look you want, sample the stain on your wood.
data reported here are believed to be reliable. No warranty is
e or implied concerning the accuracy of or the results obtained
m their use.
Prep
Proper prep starts you down the right path.
Application
Proper application of a quality stain ensures long-term
performance.
Routine Maintenance
10300E.107thPlace•Brighton,CO80601
1-800-767-5656•www.sashco.com
Reduce long-term costs, time and effort.
*When applied correctly &
maintained (3-4 years on
siding & trim).
INFO SHEET
TRW0025-12
Info Sheet
TRWDATATEC
Shelf Talker
Product Brochure
& Color Chart
TRWCLRCHRT
(TRWSHF)
Siding & Trim Stain Board
TRWBRD
POPLIST
March 2015
Capture® Log Stain
Literature
& POP
Stain Color
Fan Sales Tools
La
be Ne
lD w
es
ig
Capture
log stain
n!
Capture
log stain
®
®
Cured Stain Discs
Log homes move. Can your stain move with it?
Typical Siding Stain -
Beautiful new packaging!
Capture® Log Stain -
Cracks and fails
Protects your logs for years to come
Same great formula!
• New picture makes it easy
to identify as a log stain
• Now front & center:
Sashco, Products
that Work®
• New paint pail
• Step1iconidentifies
Capture® as the base
coat in a 2-part stain
system
• Capture® and Cascade®
labels are similarly
designed for easy
association
Relaxed State
Relaxed State
Attempting to Stretch
Attempting to Stretch
• Brought back the trees
that so many of our
customers were
familiar with
• New bullet points highlight
Capture’s excellent
elasticity and proven
durability
• Capture® log stain:
large and easy to read
Also available in 5 gallon buckets.
CAPCASPKG 2-15
Info Sheet
STAINDISCSHT 4-15
Stain Disc Sales Sheet
New Packaging Sheet
CAPDATATEC
Follow SashcoInc on:
STAINDISCASHT
CAPPKG
Capture® Log Stain
vs
The Competition
Competitive Stain Report
Sashco®
Capture®/Cascade®
Perma-Chink®
LifeLine™ Ultra-7
Lifeline™ Advance
Sashco®
Capture®/Cascade®
Sikkens®
Cetol® 1 + Cetol® 23 Plus
Covered
Covered
Exposed
Exposed
Photo: ©2011 Brett Christenson/Photographer
Testing Highlights
• Left side of panel: Sashco’s Capture® and
Cascade®
• Right side of panel: a competitive stain
• Top portion is covered, the bottom portion is
exposed to the elements
• Panelsarefacedduesouthata45˚anglefor
maximum UV exposure
• Panels are exposed for 18 months
• Mile high elevation means 25-30% more UV
radiation
For more details on how the testing was done, flip to the
back of this report.
Capture Stain Board
Stain Panel Exposure Racks Denver, Colorado
CAPSBD
Capture the Moment Stories
Capture Exposure Panel Brochure
CAPTURESTORY
CAPCOMSTAIN
Product Brochure
& Color Chart
CAPCLRCHRT
Capture Selling Center
65502
POPLIST
May 2015
Cascade® Clear Coat
La
be Ne
lD w
es
ign
Technical Data
Compatibility: PeneTreat will not interfere with the
adhesion of most wood stains and coatings. (The surface should be completely dry before applying any
coating.)
Cascade
clear coat
EPA Registration Number: 64820-1
EPA Establishment Number: 064820-CO-01
!
Effective Against: Rot, fungal decay and most woodboring insects. Does not control carpenter bees (contact Sashco for guidance).
Active Ingredient:
Disodium Octaborate Tetrahydrate-98%
(Inert ingredients-2%)
®
Coverage Rate:
6-gallon size: 27 gallons of a 10% solution will cover
4050 sq. ft. of log surface.
3 1/2-gallon size: 15 gallons will cover 2250 sq. ft. of
Maintenance
made easy
log surface.
Blue Stain: PeneTreat does not control the organisms
that cause blue stain—the gray to black marking
often present in dry wood.
Why You Need A Wood Preservative
You’ve just spent a long time leafing through
planning books, selecting the logs, choosing the perfect lot—waiting for your dream home to be built.
Why put all that at risk? Rot, weather, insects, fungi all
pose a serious threat to your logs. Protect your investment—treat your logs first to make them last.
All wood faces the possibility of rot and insect
infestation—even in dry climates. Fungi and insects
actually consume the cells of dead wood, often causing
severe structural damage, damage that often requires
log replacement—a costly repair.
PeneTreat helps protect your home from the
costly damage caused by rot and insect infestation.
If blue stain is a problem, an additional fungicide
may be needed. Contact Sashco for recommendations
on blue stain fungicides.
Packaging:
6-gallon pail (25 lbs. net; yields 27+ gallons of a 10%
solution)
Beautiful new packaging!
3 1/2-gallon pail (14 lbs net; yields 15+ gallons of a
10% solution)
Same great formula!
Application Range: 40˚F (4˚C) - 90˚F (32˚C)
• New picture shows a key
benefitofsheddingwater
What is PeneTreat?
• Nowfront&center:
Sashco,Products
that Work®
PeneTreat is a borate-based wood preservative.
Borates are well-known across the world for their protective qualities. And like other borates, PeneTreat is
highly effective in the prevention of most rot and
wood-boring insects.
When using PeneTreat, a protective “shell” coating helps defend your home against dry, wet, and
brown rot as well as termites, house borers, powderpost beetles and carpenter ants (to name a few).
• Step2iconidentifies
Cascade® as the top coat
ina2-partstainsystem
• New paint pail
• Newbulletpointshighlight
Cascade’seasyapplication,
greatprotectionagainst
UVandwaterdamageand
addedalgacide
The PeneTreat Difference
• Cascade®clearcoat:
largeandeasytoread
Also available in 5 gallon buckets.
CASPKG 2-15
1-800-767-5656 • 303-286-7271 • www.sashco.com
4
04-09
Storage and Disposal
Store unmixed powder in a cool, dry place in tightly
sealed containers.
Caution: Store mixed solution in loosely sealed containers as pressure can build up if tightly sealed. Dispose
of residual material or empty containers in accordance
with Federal, State and local regulations. Do not contaminate water, food or feed by storage or disposal.
First Aid
When natural beauty is your passion, Symphony is
“music to your eyes.” It’s the colorless coating that
not only protects, it livens the interior of your home by
allowing light to dance off the logs. When applied to
bare wood, Symphony enhances the natural grain, color
and beauty. But it can also be used over many stains to
display an orchestra of visual impact—adding depth and
richness to the color. With Symphony, cozy warmth and
natural elegance can be yours.
Designed Specifically
For Your Log Home
• Leaves a slick surface that makes cleaning a breeze—
just use a damp rag to remove dust, dirt and stains.
• An environmentally friendly, low toxicity, non-flammable formula that doesn’t have the offensive odor associated with many other clear coatings.
• Convenient 5-gallon pail packaging that lends itself to
spray application, which can save you time and labor.
• Unlike many other water-based coatings, Symphony
remains stable through several freeze-thaw cycles.
• Symphony is versatile and can also be used on interior
woodwork, cabinets, paneling and wood trim. It is not
recommended for floors or exteriors.
Fundamental Application Guidelines
1. Proper substrate preparation and application are imperative for product longevity. Read this entire Info Sheet,
SYM 002, before applying any product.
2. You should always test any coatings on your specific
logs before applying to an entire wall.
3. Apply only to interior walls where the roof is in place,
the product is at room temperature, there are no cold
drafts and the wood surfaces are between 50˚F (10˚C)
to 90˚F (32C).
4. Tannin staining should be dealt with before applying
any interior clear coatings to bare logs. Refer to the
section titled “Tannin Staining” for further information
on this important topic. If you’ve applied a pigmented
coat of stain, tannin staining is usually not an issue.
5. The moisture content of interior wood should be low
enough to resist microbial growth before applying any
coatings, at least 19% or less. Use a moisture meter to
make sure this is a fact. If the wood’s moisture content
is higher, wait until it lowers to 15% or less, or add
a biocide (such as Stay Clean I/E) to your coating
before application.
Info Sheet
SYMDATATEC
DATA
TEC
INFO
SHEET
®
®
Symphony Clear Interior Log Coating
PeneTreat helps prevent damage before it starts.
PENDATATEC
CAPPKG
CASDATATEC
The best part about PeneTreat is the money it
saves you. Not only is PeneTreat affordable, it saves
you the headaches, time and costs associated with
potential log replacement and damage control.
According to the most comprehensive study
available, the depth of penetration of PeneTreat is as
deep or deeper than other borate products that use
slow-drying and toxic solvents (like ethylene glycol)
in their formulations. Contact Sashco at 1-800-7675656 if you'd like a copy of this study.
Info Sheet
New Packaging Sheet
Info Sheet
More Protection
for Your Money
PeneTreat is registered with the Environmental
Protection Agency (EPA) for spray and brush application, which makes it perfect for remedial treatment. It
also means that you can apply it (you don’t have to be
a licensed applicator). But, you must follow all application and use guidelines.
Do not mix PeneTreat into stains. For borates to
be effective and to provide long-term protection, they
must soak into the wood itself, not remain in the coating. Although some stains contain borates, the low percentage of borate in the stain--generally 2-3% provides
little to no appreciable benefit. Therefore, follow the
PeneTreat mixing and application guidelines to
achieve recommended BAE (borate acid equivalent)
levels that truly provide long-term, effective protection.
PeneTreat can be applied by brushing, spraying,
dipping, kerf-flooding or hole flooding. It comes in
powder form and just needs to be mixed with water for
application. PeneTreat is packaged in two convenient
sizes: 6-gallon pails that are easy to carry and double
• Capture®andCascade®
labelsaresimilarly
designedforeasy
association
as a handy source for mixing the solution and the 3-1/2
gallon size—perfect for smaller jobs.
The active ingredient in PeneTreat (disodium
octaborate tetrahydrate - a refined form of the natural
mineral borax) is less toxic to people and animals
than many other chemicals used for wood preservation. However, since no pesticide is completely safe,
PeneTreat must be handled and used as directed.
Borates do not affect the natural color or strength
of wood; they are completely odorless; they’re not
corrosive to metal fasteners, nails or screws. And
when a “PeneTreat home” is properly sealed against
moisture, the borates can provide many years of
effective protection.
EYES: Immediately flush eyes with flowing, clean water
for at least 15 minutes, holding eyelids apart to irrigate
thoroughly. Get immediate medical attention.
TANNIN STAINING
Ugly brown or yellow discolorations in wood are
most often due to tannin staining. Tannins are a natural
component in all wood and help give it its natural color.
Although tannin staining can occur on exterior wood, it is
more noticeable and objectionable when it occurs on the
interior of a home.
SKIN: Remove affected clothing and wash skin with
soap and water. Wash clothing before reuse.
INHALATION: Move to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen.
Get immediate medical attention.
Tannin staining occurs different ways:
• At the surface of logs high in moisture content, when
tannins are moved to the surface by escaping water;
• When water drips on or flows over a wood surface
over a period of time. These areas will have a central
region of very light, almost white wood, surrounded
by an irregular, much darker wood where the tannins
have been concentrated.
INGESTION: Give 2 glasses of water. Call physician
and follow recommendations given. Never give anything
by mouth to an unconscious person.
Warranty
Sashco warrants this product will substantially meet
published specifications on the date of sale. If it fails to
do so, return unused portion with original sales receipt for
replacement or refund, at Sashco’s sole option. These are
purchaser’s sole and exclusive remedies for any breach of
warranty. Purchaser must determine suitability of product
for purchaser’s specific needs and assumes all risk associated with its use.
Except as stated above there are no warranties for this
product. The foregoing express warranty is in lieu of
all other warranties, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose, which
warranties are specifically excluded and disclaimed.
Usually, tannin discoloration in the surface of the wood
is only 1/32” or so deep and can be lightly sanded away.
If sanding does not work, chemical cleaners may need
to be used. Contact Sashco for detailed information, as
these cleaners need to be carefully applied.
Applying Symphony
NEW WOOD
If you’ve decided to keep your logs natural looking and
only want to apply Symphony to bare wood, best results
are obtained if you sand the wood to a smooth finish
with fine sandpaper. Be certain to remove all dust before
finishing. Do not use steel wool; it may cause rust stains.
For a smoother finish, sand between coats..
Appearance:
White granular powder
The Basics of Applying CPR
Preparation*
1. Read this entire Data Tec, CPR 002, before applying
any product.
2. Decide if you need to use the cleaner or
brightener strength.
3. Wear protective eyewear, such as safety glasses with
side shields or goggles, when applying this product.
Neoprene gloves and long-sleeved clothing are recommended to help protect skin. Hydrogen peroxide is
released when CPR is dissolved in water, so use with
good ventilation.
4. Brush any dirt, loose material or other contaminants
from wood surfaces to ensure that CPR makes good
contact with the surface you wish to clean or
brighten. Keep the solution off surfaces you do
not want bleached.
5. Use in warm weather, between 60˚ and 90˚F, for
best results.
*NOTE: CPR is not recommended for use on Redwood,
Douglas Fir or other high tannin woods. CPR may
occasionally darken these woods - please test first.
Notice
Because of many varying conditions affecting use and
application, the manufacturer advises buyer that these
conditions may impair or vary the results and effects of
the use of this product. Therefore, application and performance of this product cannot be guaranteed. Neither
the manufacturer nor the seller shall be liable in respect to
any injury or damage suffered by reason of use of this
product for a purpose not indicated on the label or when
used contrary to the directions or instructions herein.
There are no warranties which extend beyond the description on the base hereof, including any implied warranty of
merchantability.
KEEP OUT OF REACH OF CHILDREN
Cleaner Strength
(for less severe discoloration and surface cleaning)
Mix 1/2 of the container with 4 gallons of clean water
in a clean 5-gallon plastic pail.
Brightener Strength
(for aggressive cleaning)
Mix the entire container with 4 gallons of clean water
in a clean 5-gallon plastic pail.
Mixing
Freeze-Thaw Stability:
Stable, but store between 40˚F – 80˚F.
Packaging:
64 oz. plastic container (net wt. 4.8 lb.)
Stir thoroughly until the powder is mostly dissolved
(which will take a few minutes, depending on water
Solids Wt. %:
100%
Application Range:
60˚-90˚F (don’t apply to hot, sun-drenched surfaces.)
INFO SHEET
Important Notes
Sunlight, according to the USDA Forest Products
Labs, can create unsound surface wood in as little as 1-2
weeks. So, it is important to coat and seal the wood shortly after good prep work is done.
Media blasting is the best overall method of preparing
log surfaces. Refer to Keeping the Dream Alive:
Sashco’s Complete Staining Guide for detailed information on finishing a log home. Call us to get your copy.
Working Time:
1) 5-20 minutes after application to wood.
2) 4-6 hours after mixing with water.
Technical Data
FINISHED WOOD
Compatibility is a huge issue, so logs that already
have some type of stain or sealer on them will need to
be tested for compatibility; call us and we will talk you
through the testing procedure. For best adhesion to nonSashco coatings, it is usually best to lightly sand the
surface before applying Symphony. Contact Sashco for
information on compatibility testing. For best adhesion to
non-Sashco coatings, it is best to lightly sand the surface
before applying Symphony. Old finishes may need to be
mechanically removed if a lighter appearance is desired.
This Limited Warranty gives you specific legal rights.
You may have other rights which vary from state to state.
Some states do not allow exclusion of implied warranties
in consumer or other sales, limitations on the duration of
implied warranties, or exclusion or limitation of incidental or consequential damages. Thus, the limitations or
exclusions contained above may not apply to you depending upon your specific circumstances.
Maximum VOC:
0 (zero)
1-800-767-5656 • 303-286-7271 • www.sashco.com
2
Before CPR
07-09
Info Sheet
CPRDATATEC
After CPR
temperature). The solution will begin to “fizz” as the
powder dissolves. Not all of the powder will completely
dissolve in the solution; even if all of the powder is not
completely dissolved, the solution is very usable. For the
best and most consistent results, the solution should be
used within 4 hours.
Coverage
At either strength, solution coverage is between 100
and 150 square feet per gallon (500-750 square feet per 5
gallons), depending on the wood porosity.
Application
Apply CPR to one wall at a time, starting at the bottom
and working completely across, 2-5 logs high. When the
bottom 2-5 logs are completely cleaned and/or brightened, then move up the wall to the next 2-5 logs.
Continue in a similar pattern to the top of the wall. Work
only on one small area at a time (15-25 sq. ft.) for best
results. Rinse with clean water as you go. Apply via garden sprayer, brush or mop. Allow the solution to work for
5-20 minutes, keeping the surfaces wet with additional
CPR solution. For best results, vigorously scrub the surfaces with a stiff-bristle brush to remove unsound surface
wood. After you’ve cleaned the entire wall with the CPR
solution, starting at the top, rinse the entire wall thoroughly and allow to dry before application of preservatives or stains. Repeat applications of CPR solution may
be necessary for tougher discolorations, more severe UV
damage and/or heavily weathered wood surfaces.
Cleaning
Clean brushes and equipment with soap and water.
Warning
Avoid contact with eyes and skin and do not ingest.
Keep away from children and animals. Harmful if swallowed. CPR Log Cleaner & Brightener will not harm
grass or most plants — it decomposes into water, oxygen
and soda ash. Rinse grass and plants thoroughly with
clean water after exposure. Solutions of CPR can be slippery until washed away! Take precautions to avoid slipping on ladders, scaffolding, decks, sidewalks, etc.
INFO
SHEET
DATA
TEC
1
1
POPLIST
May 2015
Fully Loaded Retail Partner
Aisle Directory
Get
Literature
& POP
Stain Color
Fan Sales Tools
FLRP ’d!
Fully Loaded Retail Partner
FLRP will . . .
Improve the Customer Experience
Easy to Find
Inspire Customer Confidence Products That Work
Deliver Higher $ Margins
Premium Brands
Contact us for more details.
Colored Bin Liners (10 total)
Product Demo Blocks (5 total)
Channel Strips (11 total)
Channel Stickers
(11 total)
Tube Shelf Talkers
(6 total)
Items available as a KIT only
KIT PART NUMBER - 12600
POPLIST
May 2015
Literature
& POP
Stain Color
Fan Sales Tools
14” x 30” Blue Matte Board Signage
SIGNBL
Presentation Folders
SIGNWH
Aisle Directory Flyer
with MildewFree
Because you can’t
afford to do it twice.
with Conceal
14” x 30” White Matte Board Signage
Because you can’t
Because you can’t
PREKITFOLDER
with Conceal & MildewFree
2015
Home Improvement Product Catalog
Delivering high performance products since 1936
Home Improvement
Product Catalog
HIAPB
Sashco Caps
CAPSASHCO
MPOPLIST 5-15

the Master Sales Tool

Transcription

Similar documents

Warranty Info

Hydrite SB 60 - IMERYS Kaolin

Free Casino Games For Mobile Phones Slot Machine Repair

Terra Plus Technical Data Sheet

FS900 - Heiser

Siding - Emmerson Lumber

10612 ImpactOilColor ActiveColor PreTone

Conceal Brochure

AS T IN

Wholesale Adult Uniforms