PUBLIC AUCTION

PUBLIC
AUCTION
LIVE ON-SITE WITH WEBCAST
INSPECTION:
Wednesday, September 30
from 8:00 A.M. – 3:30 P.M.
Thursday, October 1 at 10:00 A.M.
LARGE QUANTITY OF COLD HEADING EQUIPMENT • CNC VMCs • CNC LATHES •
GRINDERS • CONVENTIONAL MACHINING EQUIPMENT • MISC. SUPPORT EQUIPMENT
Surplus Assets of
APEX TOOL GROUP
3000 W. Kingsley Road
Garland, Texas 75401
Apex Tool Group (ATG)
is one of the largest manufacturers
of professional hand and power
tools in the world, serving the
industrial, vehicle service and
assembly, aerospace, electronics,
construction and serious
DIY markets.
2005 JERN YAO MDL. 19B4S 4-DIE
NATIONAL MDL. 89 2-DIE 3-BLOW
ONLINE BIDDING: YOU MUST REGISTER
IN ADVANCE FOR ONLINE BIDDING
AT THIS AUCTION
NATIONAL 3/8" 4-DIE
NATIONAL MDL. 1000-7 6-DIE
NATIONAL MDL. FX56CF 6-DIE
LEADWELL
MDL. V30I
CNC VMC
NATIONAL 1/2" 4-DIE
18% ONLINE BUYER’S PREMIUM
ECOVERY SER
VICES
MENT R
INVEST
AU
CTIO
NEE
RS
U
APPRAISERS LIQ
ID
RS
ATO
INVESTMENT RECOVERY SERVICES
3421 North Sylvania Avenue, Fort Worth, TX 76111
tel: 800.583.1111 • 817.222.9848
fax: 817.834.4075
Email Britton: [email protected]
or Greg at [email protected]
WWW.IRSAUCTION.COM
TX Lic. No. 11245
3
AVAILABLE
In conjunction with:
www.biditup.com | 818.508.7034
Industries (1991) Inc.
AUCTIONEERS | LIQUIDATORS
A
| APPRAISERS
Maynards www.maynards.com
ph 248-569-9781 • fax 248-569-9793
www.cia-auction.com | 513.241.9701
COLD FORMERS & HEADERS
NATIONAL Mdl. 1000-7 6-Die Cold Former, S/N 38519,
1-1/8" cutoff dia. alloy, 5" cutoff length, 6" die kickout,
40–60 PPM. Equipped with: bushing cutoff, 100 HP, 230/460
volt 3-phase motor, power pre-feeding, pneumatic feed roll
clamping, transfer lift, nut transfer. *Equipped with drive for
IFO CAM for universal transfer.
2005 JERN YAO Mdl. 19B4S 4-Die Progressive Header,
S/N 32, 15mm cutoff dia., 140mm cutoff length, 120mm-die
kickout, 170 PPM. Equipped with: bushing cutoff, PKO 1–4,
bolt maker transfer with IFO CAM, 2-plane straightener,
oil centrifuge, spare transfer, Ace monitor.
NATIONAL Mdl. FX56CF 6-Die Cold Former, S/N 20972,
17.7mm cutoff dia., 70mm cutoff length, 75mm kick out
length, 38mm PKO stroke, 60/160 PPM, 1400 KN loading
force. Equipped with: bushing cutoff, die and punch pack,
cold form transfer, smog hog, uncoiler: 20mm wire dia.,
4,000-lbs. coil weight, linear feed, punch knock out.
NATIONAL 1/2" 4-Die Progressive Cold Header, S/N 28027,
1/2" cutoff dia. alloy, 5" die kickout, 6-1/2" cutoff length,
70 PPM. Equipped with: bushing cutoff, 2-plane straightener,
30 HP, 230/460 volt, 3-phase, cabinet of tools.
NATIONAL MDL. 1000-7 6-DIE
NATIONAL 3/8" 4-Die Progressive Header, S/N 27670,
3/8" max. cutoff dia., 3-1/2" max. die kickout, 4-3/4" cutoff
length, 85 PPM. Equipped with: bushing cutoff, AC motor
and controls.
NATIONAL Mdl. 89 2-Die 3-Blow Cold Header, S/N 40368,
9/16" cutoff dia. alloy, 5" max. die kickout, 6-1/2" cutoff
length, 100 PPM. Equipped with: bushing cutoff, PKO, 25 HP,
460 volt.
2005 JERN YAO MDL. 19B4S 4-DIE
NATIONAL 1/2" 4-DIE
2
MINSTER MDL. S1-300-36-42 SSSC
INLINE WIRE DRAWERS & COILER
RMG Mdl. 67-20121-67 Inline Wire Drawer, S/N 91082738,
3/8" nominal wire dia., 28" capstan, 20 HP AC motor, 121 FPM.
RMG Mdl. 67-0761-85 Inline Wire Drawer, S/N 87101814,
3/8" nominal wire dia., 28" capstan, 7 HP AC motor, 61 FPM,
3-phase motor.
RMG Mdl. 910-2554-22 Inline Wire Drawer, S/N 109724,
9/16" nominal wire dia., 36" capstan, 25 HP AC motor, 54 FPM.
RMG Mdl. 2024-02 Uncoiler, S/N 8807229, 1-1/4" max. rod
size alloy, 4,000-lbs. coil weight, adjustable speed.
STRAIGHT SIDE SINGLE CRANK PRESS
MINSTER Mdl. S1-300-36-42 SSSC, 36" x 42" bolster, 60
SPM, 300-ton, 10" stroke, 10" slide adjustment, 24" shut
height, s/n 24157.
ROBOT
2006 FANUC Mdl. A05B-1138-B242 Robot, S/N F78237.
ETCHERS
NATIONAL MDL. FX56CF 6-DIE
(2) TRUMPF F Laser Mdl. Vector Mark Etcher.
(2) ATS Laser Etcher.
2006 FANUC MDL. A05B-1138-B242 ROBOT
NATIONAL MDL. 89 2-DIE 3-BLOW
2
AVAILABLE
TRUMPF F LASER ETCHER
NATIONAL 3/8" 4-DIE
LIVE ON-SITE
WITH WEBCAST
3
9
AVAILABLE
5
AVAILABLE
WERA PROFILATORS
EMCO MDL. 342 CNC LATHES
5
AVAILABLE
LEADWELL MDL. V40 CNC
LEADWELL MDL. V30I CNC
3
AVAILABLE
LEADWELL MDL. V30 CNC
4
3
AVAILABLE
2
AVAILABLE
OKUMA HOWA MDL. ACT 15 CNC LATHES
PROFILATORS
SUPERMAX Mdl. YCM-FV56A CNC VMC, S/N 8168.
FANUC Mdl. Robodrill a-T10B CNC VMC.
(5) WERA Profilators, machine used for
polygon milling, both part and tool are
indexable, 3" to 12" length cap., profiles are
milled on ends of the parts included ball
ends, torx and others, milled for either round
or hex bar.
CNC LATHES
FAST CUT Mdl. TNC10 CNC Lathe, S/N D27016.
DAEWOO Mdl. Lynx 200 CNC Lathe, S/N L2001418.
(9) EMCO Mdl. 342 CNC Lathes.
CNC VERTICAL MACHINING
CENTERS
MORI SEIKI Mdl. SL25 CNC Lathe, with barfeed.
OKUMA HOWA Mdl. Act 3xt CNC Lathe, with
barfeed, S/N 11014.
(6) TAKAMAZ Mdl. EX20 CNC Lathes.
SUPERMAX Mdl. TC-26/12T CNC Lathe,
with barfeed.
1997 NAKAMURA-TOME Mdl. TMC20II CNC
Lathe, S/N H01505.
1996 NAKAMURA-TOME Mdl. TMC20II CNC
Lathe, S/N H010503.
OKUMA Howa Mdl. Act 30 CNC Lathe, S/N 9809.
(5) LEADWELL Mdl. V40 CNC VMCs.
(2) OKUMA HOWA Mdl. Act 15 CNC Lathes, S/Ns 00020, 4048.
(3) LEADWELL Mdl. V30 CNC VMCs.
SCREWDRIVER LATHE
NEW KO TUNG CNC Screwdriver Lathe.
(2) OKUMA HOWA Mdl. Act 20 CNC Lathes, S/Ns 4003, 4095.
(3) LEADWELL Mdl. V30i CNC VMCs.
(2) OKUMA HOWA Mdl. HL-JR CNC Lathes, S/Ns 0020, 8021.
(2) SUPERMAX Mdl. Max-1 CNC VMCs,
S/Ns 209865/304906.
OKUMA HOWA Mdl Act 3 CNC Lathe, S/N 9647.
7
AVAILABLE
OKUMA HOWA MDL. ACT 3XT CNC LATHE W/BARFEED
NEW KO TUNG CNC SCREWDRIVER MACHINE
SUPERMAX MDL. TC-26/12T CNC LATHE WITH BARFEED
NAKAMURA-TOME CNC LATHE
<
TAKAMAZ
MDL. EX20
CNC LATHE
6
AVAILABLE
>
FAST CUT
MDL. TNC10
CNC LATHE
5
LATHES
CHIN HUNG Mdl.
CH-530x1000 Manual
Lathe, S/N CH99085.
SOUTH BEND Manual
Lathe, S/N 233CH.
DoALL Mdl 16 Manual
Lathe.
MILLS
1999 GENTIGER Mdl.
SHCM97A Manual Mill,
S/N 66965.
BRIDGEPORT Manual Mill,
S/N 161746.
SURFACE GRINDERS
PARKER MAJESTIC
Surface Grinder,
S/N 5727ZV91.
CHIN HUNG MDL. CH-530X1000 MANUAL LATHE
JONES & SHIPMAN Mdl.
540LH Surface Grinder,
S/N B015558.
KENT Mdl. MD1420
Shaanji Surface Grinder,
S/N 92009.
OKAMATO ACCUGAR Mdl.
124N Surface Grinder,
S/N 6624.
BRIDGEPORT MANUAL MILL
CENTERLESS GRINDERS
JAINNHER Centerless Grinders,
(5) Mdl. 18 and (1) Mdl. 18B.
SOUTH BEND MANUAL LATHE
PARKER MAJESTIC SURFACE GRINDER
DoALL MDL. 16 MANUAL LATHE
<
KENT MDL.
MD1420
SHAANJI
SURFACE
GRINDER
JONES & SHIPMAN MDL. 540LH
SURFACE GRINDER
INSPECTION:
Wednesday, September 30
from 8:00 A.M. – 3:30 P.M.
Visit Website for Details,
Photos & Complete Terms
& Conditions
www.irsauction.com
6
OKAMATO ACCUGAR MDL. 124N
SURFACE GRINDER
PRESSES
ITC Mdl. Interlaken
Press.
(2) V&O Punch Press,
S/Ns 90ST-34, 90ST-4.
<
ITC MDL. INTERLAKEN PRESS
WHEELABRATOR TUMBLAST MACHINE
2
AVAILABLE
23
AVAILABLE
MARVEL SAW
ATS LASER ETCHER
VIEW OF VIBE BOWLS
VIEW OF 10 CU. FT. VIBE BOWLS
MISCELLANEOUS
DoALL Mdl. DBW-15 Band Saw, S/N 389-79140.
MARVEL Saw Band Saw.
6
AVAILABLE
(2) 1/2" Butt Welders.
(5) MAGNAT AUTOBUFF Mirror Polishers.
(15) 20 Cu. Ft. Vibe Bowls; (10) 10 Cu. Ft. Vibe Bowls;
Bending Machine; Wheelabrator Tumblast Machine.
5
AVAILABLE
MAGNAT AUTOBUFF MIRROR POLISHER
JAINNHER CENTERLESS GRINDER
APEX TOOL, NORTH CAROLINA
Following Equipment Being Sold via Photo for Apex Tool, Apex, North Carolina Plant
To Arrange Inspection of the Following Machines Contact Britton New 817.706.0841 or [email protected]
MATTISON Grinder, 18.5" x 12' table, PATRIOT
Screen Printer, Exposure Equipment, RUTHERFORD
Printer, used to print tape measures.
MATTISON GRINDER
PATRIOT SCREEN PRINTER
RUTHERFORD PRINTER
EXPOSURE LIGHT AND VACUUM TABLE
7
COVERY E
S RVICE
ENT RE
M
T
S
E
S
INV
AU
CTI
ONE
ERS
APPRAISERS
I
LIQU
DAT
OR S
PUBLIC AUCTION
Presorted
First Class Mail
U.S. Postage
PAID
Eugene, Oregon
Permit No. 17
Sale Conducted by:
INVESTMENT RECOVERY SERVICES
3421 NORTH SYLVANIA AVENUE, FORT WORTH, TX 76111
ASSOCIATION OF
MACHINERY AND
EQUIPMENT APPRAISERS
Appraisers on Staff
LIVE ON-SITE WITH WEBCAST
ONLINE BIDDING: You must register
in advance for online bidding at this auction
Surplus Assets of
APEX TOOL GROUP
Garland, Texas
Thursday, October 1
at 10:00 A.M.
INSPECTION: Wednesday, September 30
from 8:00 A.M. – 3:30 P.M.
LARGE QUANTITY OF COLD HEADING EQUIP. • CNC
VMCs • CNC LATHES • GRINDERS • CONVENTIONAL
MACHINING EQUIP. • MISC. SUPPORT EQUIP.
PUBLIC AUCTION
LIVE ON-SITE WITH WEBCAST
Thursday, October 1 at 10:00 A.M.
LARGE QUANTITY OF COLD HEADING EQUIPMENT • CNC
VMCs • CNC LATHES • GRINDERS • CONVENTIONAL
MACHINING EQUIPMENT • MISCELLANEOUS SUPPORT
INSPECTION:
Wednesday, September 30
from 8:00 A.M. – 3:30 P.M.
Surplus Assets of
APEX TOOL GROUP
3000 W. Kingsley Road
Garland, Texas 75401
ONLINE BIDDING: YOU MUST REGISTER
IN ADVANCE FOR ONLINE BIDDING
AT THIS AUCTION
Apex Tool Group (ATG)
is one of the largest manufacturers
of professional hand and power
tools in the world, serving the
industrial, vehicle service and
assembly, aerospace, electronics,
construction and serious
DIY markets.
MINSTER MDL. S1-300-36-42 SSSC
Visit Website for Details, Photos & Complete Terms & Conditions • www.irsauction.com
QS-0028393