ZA420 Approach, Siderow Barrette, Threshold - ihr

Transcription

IHR GmbH Hofmeister + Rumpf - Germany
www.ihr-aviation.net
ZA420 Approach, Siderow Barrette,
Threshold, Threshold Wingbar
& Runway End
high intensity, uni-directional elevated light
features
options
• Lightweight yet robust due to its aluminium alloy ‘double
skinned’ construction
• No external colour filters required
• ZS022 sighting device
• Pk 30d halogen lamps
J1/80 100W 6.6A
• Smooth outer glass surface resists build up of dirt and is easy
to clean
• Pre-focused optics simplify maintenance procedures
• Lamp replacement effected without requiring any tools
• Low windage area
• Choice of ‘gimble’ mounting methods - M32 stem, M25 stem or
50/60mm O/D coupling for approach pole structures
• Light head replacement effected without any resighting
required
• Powder coat paint finish in golden yellow. All fasteners are
stainless steel
• IMM available on request
compliance with standards
•
•
•
•
•
FAA
E-982 and L-862S, AC150/5345-46
ICAO
CAA
NATO
BS3224
Annex 14, figs 2.1, 2.2, 2.3, 2.4 & 2.8
CAP168, figs 6A/1, 6A/2, 6A/3, 6A/4, 6A/8
STANAG 3316
Part 4, elevated fittings
application
High intensity, uni-directional, elevated runway approach, siderow
barrette, threshold, threshold wingbar and runway end lights suitable
for use in all weather operation installations up to ICAO category III
systems.
J1/83 150W 6.6A
J1/84 200W 6.6A
runway end
approach & threshold
siderow & threshold wingbar
electrical supply
Suitable for use in 6.6A airfield lighting circuits, normally supplied from
one 100W, 150W or 200W series circuit isolating transformer. Power
consumption is 100W, 150W or 200W depending upon application.
packaging data (head only)
Net weight
Gross weight Carton size
1.8kg
2.4kg
225mm(w) x 225(d) x 260mm(h)
components
1 Body casting (golden yellow)
Not saleable
2 Rim
SLC40122
3 Clear spreader
SLC16074
or red
SLC19170
or green
Reflector edge seal
Reflector - clear
or reflector
red/green
Rear cover
Rear cover seal
300mm ‘B’ type plug lead
Lamp spring
J1/80 100W 6.6A Pk30d lamp
SLC19171
SLC33078
SLC28049
4
5
6
7
8
9
10
or J1/83 150W
or J1/84 200W
11 Cable gland assembly
SLC28050
SLC40121
SLC33079
SLC13001
SLC32056
SLC08057
SLC08056
SLC08069
SLC21114/5/6
typical installation methods
• On a 204mm (8”) dia. ground mounting plate (ZM120/1)
• On a short approach pole up to 2.2m long
• On an FAA L867 type base can
• On a ground mounting spike
• On a FAA type frangible coupling
• Other installation methods available on request
ZA420 installed on a short approach pole up to 2.2m long
ZA420 installed on 204mm (8”) ground mounting plate
Note
The ground mounting plate is designed to be held down by means of three 10mm
(3/8”) rag bolts grouted into the concrete block on 178mm PCD.
ZA420 installed on a FAA L867 base can
1.
2.
3.
4.
ZA420 Light head
M32 Mounting Stem
Frangible coupling
FAA Tyoe L867 base
5.
6.
7.
8.
Isolating transformer
Gasket
Support Plate
FAA Type L867 baseplate
Alternative support arrangements for ‘A’ or ‘B’ type socket lead mounted in a wells coupling.
1.
2.
3.
ZA420 Light head
Pole coupling
Aluminium tube 50.8
O/D 10SWG length as required
4.
5.
6.
7.
Frangible coupling
Wells coupling
50mm dia pipe (plastic or metal)
Concrete block
ZA420 installed on 204mm (8”) ground mounting plate
Note
photometric performance
Approach Centre Line:
White
ZA420
Nominal Lamp Details
Main Ellipse Intensity Measurements (Candelas)
Power
Average
21530
Current
6.6 Amps
Min. Average
20000
Type
J1/83
Max (B)
33340
ICAO
CAP168
Min (A)
12210
Annex 14
FIG 6A.1
150 Watts
FIG 2.1
Approach Side Row:
Red
ZA421
Power
200 Watts
Average
7486
Current
6.6 Amps
Min. Average
5000
Type
J1/84
Max (B)
11919
ICAO
CAP168
Min (A)
4318
Annex 14
FIG 6A.2
FIG 2.2
Threshold:
Green
ZA426
Power
Average
10762
Current
6.6 Amps
Min. Average
10000
Type
J1/83
Max (B)
14866
ICAO
CAP168
Min (A)
7515
Annex 14
FIG 6A.3
150 Watts
FIG 2.3
Threshold Wingbar:
Green
ZA426
Power
Average
11340
Current
6.6 Amps
Min. Average
10000
Type
J1/84
Max (B)
16247
ICAO
CAP168
Min (A)
5769
Annex 14
FIG 6A.4
200 Watts
FIG 2.4
Runway End:
Red
ZA421
Power
Average
4814
Current
6.6 Amps
Min. Average
2500
Type
J1/80
Max (B)
8831
ICAO
CAP168
Min (A)
3403
Annex 14
FIG 6A.8
FIG 2.8
100x Watts
The ground mounting plate is designed to be held
down by means of three 10mm (3/8”) rag bolts
grouted into the concrete block on 178mm PCD.
atg airports ltd Automation House, Lowton Business Park, Newton Road, Lowton St. Mary’s, Warrington Wa3 2ap UK
t +44 (0) 1942 68 5555
f +44 (0) 1942 68 5518
e [email protected] w www.atgairports.com
ZA480 Series Runway Approach & Siderow Barrette,
Threshold, Wingbar, Threshold/End, Runway Edge,
Runway Centreline & TDZ
runway approach & edge high intensity inset light
features
application
• Lightweight and robust due to its aluminium alloy construction
• Components that are common with ZA181 and ZA280 series
• Low profile - 12.7mm projection
High intensity, inset runway approach, siderow barrette, runway
threshold, threshold wingbar, combined threshold/end or runway end
fitting suitable for use in category I, II and III all weather operation
• Long life halogen lamps
• 1500 hours at full intensity. Over 3500 hours in normal usage
airfield lighting systems.
• Standard adaptor rings to suit 15”, 15.5” bases
• Prism removal and replacement achieved without the need for
adhesive or sealants
•
•
•
•
•
•
Colour beam variations achieved by dichroic coating
Lamp bypass options available when required
Pre-focused optics to simplify maintenance procedures
Light channel within 5mm of grade
Plug for pressure testing
Low temperature - temperature at centre of top cover remains
below 160°C ICAO and FAA limit
• Twin or three lead versions available
• Wet or dry seating pot options
• Powder coat paint finish in golden yellow or anodised aluminium
• All fasteners are stainless steel
• IMM available on request
compliance with standards
• ICAO
• FAA
• NATO
• CAA
Annex 14 figs 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8,
2.9, 2.10
L-850A,B,C, D, E Class I & IIB, AC150/5345-46C
Stanag 3316
CAP168 Figs 6A/1,6A/2, 6A/3, 6A/4, 6A/5 6A/6,
6A/7, 6A/8, 6A/9, 6A/10
options
•
•
•
•
•
•
ZM480 Seating pot (wet)
ZM480 Seating pot (dry)
ZM480 Seating pot (twin)
PSA & FAA adaptors
ZS023 Sighting device
ZM500/4 Lifting handle
• ZM480 installation jig
electrical supply
Suitable for use in 6.6A airfield lighting circuits normally supplied from
100W, 200W or 300W isolating transformers.
packaging data
Net weight
Gross weight
Carton size 9.3kg
10kg
50mm(w) x 330mm(d) x 330mm(h)
components
1 Body casting uni-directional
(golden yellow)
Not Saleable
or bi-directional
Not Saleable
2 Clear prism
SLC16069
or red prism
SLC19141
3
4
5
6
7
or yellow prism
or green prism
or blank for prism aperture
Prism gasket
Prism clamp
Prism clamp gasket
Bottom cover gasket
SLC19153
SLC19154
SLC40092
SLC33075
SLC32037
SLC33069
SLC33076
8
9
10
11
12
13
or bottom cover casting (three lead)
‘B’ type plug lead
Cable gland assembly
Cable clamp
Reflector lamp 105W
Lampholder
Lamp retaining spring
SLC32040
SLC32039
14
15
16
Lamp gasket
Mounting plates:
Approach, Siderow and Wingbar
Runway edge
Threshold (axial), runway end
Threshold (LHT), runway end
Threshold (RHT), runway end
Lampholder support block
SLC33077
Bottom cover casting (single lead)
or bottom cover casting (twin lead)
1
2
3
5
4
12 14 11 13 16
Not Saleable
Not Saleable
SLC40114
SLC13026
SLC21282/3/4
SLC21281
SLC08075
15
6
10
SLC21278
SLC21280
SLC21279
SLC21287
SLC21286
SLC21285
17 Pressure test plug
7
17
SLC21256
8 9
typical installation methods
• In a 12” dia seating pot, atg airports ltd type ZM480
• In a 12” FAA L-868 Base
ZA480 Installed in ZM480 Seating Pot (dry version)
1.
2.
3.
ZA480 Fitting
ZM480 Seating Pot
Secondary Connection
Note
4.
5.
6.
ZA480 Installed on FAA L-868 Base
Grout
‘O’ Ring
Cable Gland
ZM480 Wet seating pot arrangement information available on request.
1.
2.
3.
4.
5.
6.
ZA480 Fitting
FAA L-868 Base (one piece)
Outer earth terminal (optional)
Inner earth terminal (optional)
Isolating transformer
Secondary connection
7.
8.
9.
10.
11.
Primary connection
Grommet
Anchor ring
‘O’ Ring
Dam ring
photometric performance
Approach Inset Fitting: (Threshold to 315m)
White
ZA480
Power
3 x 105 Watts
Average
21316
Current
6.6 Amps
Min. Average
20000
Type
Cold Relfector Lamp
Max (B)
27978
ICAO
CAP168
Min (A)
13063
Annex 14
FIG 6A/1
FIG 2.1
Approach Siderow Inset Fitting:
Red
ZA481
Power
3 x 105 Watts
Average
6028
Current
6.6 Amps
Min. Average
5000
Type
Cold Relfector Lamp
Max (B)
7275
ICAO
CAP168
Min (A)
4141
Annex 14
FIG 6A/2
FIG 2.2
Threshold Inset Fitting:
ZA485
Green
Power
2 x 105 Watts
Average
11546
Current
6.6 Amps
Min. Average
10000
Type
Cold Relfector Lamp
Max (B)
14433
ICAO
CAP168
Min (A)
8405
Annex 14
FIG 6A/3
FIG 2.3
Threshold Wingbar Inset Fitting:
ZA486
Green
Power
3 x 105 Watts
Average
11409
Current
6.6 Amps
Min. Average
10000
Type
Cold Relfector Lamp
Max (B)
13990
ICAO
CAP168
Min (A)
7622
Annex 14
FIG 6A/4
FIG 2.4
Specification
ICAO
CAP168
application
light colour
figure no.
fitting code
FAA
2.1
6A/1
-
Approach Centreline and Crossbar
White
2
za480
2.2
6A/2
-
Approach Siderow
Red
3
za481
2.3
6A/3
L-850E
Threshold
Green
5
za485
2.4
6A/4
-
Threshold Wingbar
Green
6
za486
2.5
6A/5
L-850B
Touchdown Zone
White
11
za484
2.7
6A/7
L-850A
Centreline
White
Red
10
-
za484
za484
2.8
6A/8
L-850D
End
Red
8
za482
2.10
6A/10
L-850C
Edge
White
Yellow
Blue
Red
9
-
za483
za483
za483
za483
2.1
2.8
6A/3
6A/8
L-850E
L-850D
Threshold/
End
Green
Red
4
8
za487
za487
2.8
6A/8
L-850D
L-850D
Threshold/
End
Green
Red
7
8
za488
za488
atg airports ltd Automation House, Lowton Business Park, Newton Road, Lowton St. Mary’s, Warrington Wa3 2ap UK
t +44 (0) 1942 68 5555 f +44 (0) 1942 68 5518 e [email protected] w www.atgairports.com

ZA420 Approach, Siderow Barrette, Threshold - ihr

Transcription

Similar documents

Approach Siderow Barrette