Catalog

CAT. No. KS - 570E
SC
SERIES
SCS Single Action Push Type
SCD Double Action Type
Linear Ball Bearing Type
s
uper
c
ylinder
FUJIKURA RUBBER LTD.
General Description of BF Cylinders
TYPES
FC Series : Single / Double Action ………………………………… Standard Cylinders
SC Series : Single / Double Action ………………………………… Super Cylinders
PC Series : Single / Double Action ………………………………… Pocket Cylinders
TC Series : Single …………………………………………………… Thin Cylinders
TD Series : Double Action …………………………………………… Thin Cylinders
FEATURES IN COMMON
BF Cylinders are bound together by unique unrivaled common features, which are
all attributable to the rolling action of BF Diaphragms.
●
Perfect Leak-proof
No Blow-By Leakage.
●
Very Low Friction
: Responsive to minute pressure variations.
: Virtually no hysteresis - loss in movement.
: Low start up pressure as low as 0.01MPa.
: Smooth "Non - Jarring" action.
: Ready to start even after long interval.
●
Lubrication-Free
No Lubricator required in the air line.
●
Excellent resistance to pressure
Assured by the rolling principle of BF Diaphragms.
( Molded products of durable fabric-reinforced NBR )
PREFERRED APPLICATIONS
BF Cylinders find its best applications in such cases where air leakage is not allowed
and/or sensitive response is desired to minute pressure variations.
●
●
●
●
●
1
Sensitive Actuators in Automatic Controllers & Instruments, Pressure rollers and Dancer rollers.
Air line equipment in the clean factories disliking oil mist contamination.
Polishing equipment for Lenses and Jewels.
Precision actuators of constant output force. ( Spot welder etc.)
Actuator for emergency use.
s
c
uper
SC
ylinder
Linear ball bearing Type
series
Model SCS : Single Action (Push)
Model SCD : Double Action
■ SPECIFICATIONS
Single Action (Push) / Double Action
Operating Style
Cylinder Diameter
mm
40
50
63
80
Stroke
mm
48
64
78
108 144 156 178 204 82,142,192,240
96,168,226,280 112,192,256,320
（Double）mm
48
64
78
108 144 156 178 204 82,142,192,240
96,168,226,280 112,192,256,320
（Single）
100 112 125 140
160
180
200
Compressed Air (Non-Lubricated )
Working Fluid
Working Pressure Range MPa
0.01〜 0.7
Working Temperature Range℃
Rod Bearing
0〜 60
Linear ball bearing without seal , Linear ball bearing with seal on both sides
Mounting
Direct , L , Front Flange , Rear Flange ,Trunnion , Pivot-Mounting
FEATURES
●
●
●
●
SC Series is equipped with a linear ball bearing, having the same dimensions
and structure as FC Series, to maximize the features of the BF diaphragm.
The frictional resistance is smaller than the conventional types.
The pressure fluctuation following capability is excellent.
Operation is possible even under very small pressure.
NOTE
●
●
●
●
This series can be used as an ideal actuator for the following control operations :
To ensure correct control under low pressure
Control of tension of printing machines and plastic production facilities
Control of contact pressure of textile processing and metalworking machines
Control of pressing force of polishing machines and testers
ORDERING DATA [ Example ]
SCD
40
48
S0
Cylinder dia.
Stroke
Single Action
Double Action
P
Spring
Model No.
SCS
SCD
B0
None
S0
S1
In case of FCD
None
Standard Spring
Bearing
B0
None
L
F
R
T
P
Mount
--L
Front Flange
Rear Flange
Trunnion
Pivot
Linear ball bearing without seal
B1 Linear ball bearing with seal on both sides
2
INTERNAL CONSTRUCTION/PARTS DESCRIPTION
SINGLE ACTION TYPE
■ PARTS LIST
DESCRIPTION
Bonnet F/R
O-Ring
Piston
Cylinder/Spacer
Rod
BF Diaphragm
Return Spring
Bearing
Hole Stopper Ring
Tie Rod
MATERIAL
A Alloy Die-Casting
A Alloy Casting
( FCS-160 & over )
NBR
A Alloy Casting
A Alloy
Stainless Steel
Hard Steel, Hard Chrome
Plated ( FCS-80 & over )
Fabric Reinforced NBR
Spring Steel Wire
Linear Ball Bearing
Steel ( SKS )
Carbon Steel
Note : 1. A parts are anodic treated.
2. Unless otherwise specified, steel parts are
galvanized.
3. A die-casting parts are bake painted.
DOUBLE ACTION TYPE
■ PARTS LIST
DESCRIPTION
Bonnet F/R
O-Ring
Piston
Cylinder/Spacer
MATERIAL
A Alloy Die-Casting
A Alloy Casting
( FCS-160 & over )
NBR
A Alloy Casting
A Alloy
Rod
Stainless Steel
Hard Steel, Hard Chrome
Plated ( FCS-80 & over )
BF Diaphragm F
Ass'y
Fabric Reinforced NBR
with Fitting Caulked
BF Diaphragm
Return Spring
Bearing
Hole Stopper Ring
Tie Rod
Fabric Reinforced NBR
Spring Steel Wire
Linear Ball Bearing
Steel ( SKS )
Carbon Steel
Note : 1. A parts are anodic treated.
2. Unless otherwise specified, steel parts are
galvanized.
3. A die-casting parts are bake painted.
3
s
c
uper
ylinder
SPECIAL TYPE CYLINDER
SCD-40 〜 200
SUPER CYLINDER DOUBLE ACTION TYPE
■ PARTS LIST
DESCRIPTION
Bonnet F/R
O-Ring
Piston
Cylinder/Spacer
MATERIAL
A Alloy Die-Casting
A Alloy Casting
( FCS-160 & over )
NBR
A Alloy Casting
A Alloy
Rod
Stainless Steel
Hard Steel, Hard Chrome
Plated ( FCS-80 & over )
BF Diaphragm F
Ass'y
Fabric Reinforced NBR
with Fitting Caulked
BF Diaphragm
Return Spring
Bearing
Hole Stopper Ring
Tie Rod
Fabric Reinforced NBR
Spring Steel Wire
Linear Ball Bearing
Steel ( SKS )
Carbon Steel
Note : 1. A parts are anodic treated.
2. Unless otherwise specified, steel parts are
galvanized.
3. A die-casting parts are bake painted.
Fujikura BF Cylinders
4
SCS-40-48〜140-204
Outline Dimensions
O
F0 / F1 : Spring force at zero/full stroke (N)
Ae : Effective area (mm2 )
N : Wrench flat width
■ OUTLINE DIMENSIONS
Dc −STROKE
A
B
C
D
E
F
G
H
I
J
K
L
−
−
−
−
−
−
−
−
53
63
82
100
120
137
150
165
105
130
160
205
268
290
322
370
42
45
50
58
65
72
76
84
10
12
16
20
25
25
30
35
20
20
24
32
40
44
48
52
M 8 ×1
M 10 × 1.25
M 12 × 1.5
M 16 × 1.5
M 20 × 1.5
M 22 × 1.5
M 24 × 1.5
M 27 × 1.5
6
6
7
10
12
13
14
16
Rc 1/8
Rc 1/8
Rc 1/4
Rc 1/4
Rc 1/4
Rc 3/8
Rc 3/8
Rc 3/8
9
10
12
14
14
18
18
18
−
−
−
−
−
−
−
−
42
50
63
80
98
112
125
140
M 6DP 9
M 6DP 9
M 8DP 12
M 8DP 12
M10DP 15
M10DP 15
M10DP 15
M12DP 18
40
50
63
80
100
112
125
140
48
64
78
108
144
156
178
204
M N
17
17
19
24
30
32
36
41
8
10
13
17
22
22
24
30
O
P
Q
R
S
T
75
98
120
157
214
228
249
290
8
8
9
10
11
12
16
16
7 51.5 61 M 5
8 61.5 73 M 6
11 78.5 94 M 8
14
97 114 M 8
16 117.5 136 M 10
19 135 156 M 12
20 149 170 M 14
24 164 190 M 14
SPRING FORCE
Ae
1100
1770
2730
4540
7240
8820
11100
14100
F0
F1
7.8
14.7
23.5
39.2
61.7
76.4
95.1
119.6
19.6
29.4
47
78.4
127.4
158.8
198
254.8
※：径40のみ2Dは24mm
L Type Mount
Ds-STROKE A A AB AC AD AE AF AG AH AI
AJ AK
40 -- 48
35
53
35
5
6.5 25
10 155 17 175
50 -- 64
40
63
40
6
7.5 26
11 182 19 204
63 -- 78
50
82
50
6
9.5 31
14 222 19 250
80 -- 108 60 100 60
8
9.5 35
17 275 23 309
100 -- 144
75 120 70
8
12
40
20 348 25 388
112 -- 156
85 137 80
8
14
44
23 378 28 424
125 -- 178
95 150 87
10
14
46
24 415 30 463
140 -- 204 100 165 95
10
16
46
24 462 38 510
M6
×
14
M6
×
14
M8
×
20
M8
×
20
M10
×
25
M10
×
25
M10
×
25
M12
×
30
Front Flange Type Mount
Ds-STROKE BA BB BC BD BE BF BG BH BI
40 -- 48
70
35
53
6.5
50 -- 64
80 100 40
63
7.5
63 -- 78 105 130 55
82
9.5
90
80 -- 108 120 150 70 100 9.5
100 -- 144 150 180 85 120 11.5
112 -- 156 166 195 100 137 14
125 -- 178 180 210 115 150 14
140 -- 204 195 225 125 165 16
5
M6
×
10
M6
×
10
M8
×
14
M8
×
14
M10
×
16
M10
×
16
M10
×
16
M12
×
20
9
114 33
10 140 35
12 172 38
13 218 45
14 282 51
15 305 57
16 338 60
19 389 65
s
c
uper
ylinder
Rear Flange Type Mount
Ds-STROKE BA BB BC BD BE BF BG BJ
40 -- 48
70
35
53
6.5
50 -- 64
80 100 40
63
7.5
63 -- 78 105 130 55
82
9.5
90
M6
M6
M8
125 -- 178 180 210 115 150 14
140 -- 204 195 225 125 165 16
12 222
×
14
M8
13 276
×
14
100 -- 144 150 180 85 120 11.5
M10
×
16
M10
×
16
M10
×
16
M12
×
20
156
10 185
×
10
80 -- 108 120 150 70 100 9.5
112 -- 156 166 195 100 137 14
9
×
10
14 347
15 377
16 414
19 473
Trunnion Type Mount
Ds-STROKE CA CB CC CD CE CF CG CH
40 -- 48
50 -- 64
63 -- 78
80 -- 108
100 -- 144
112 -- 156
125 -- 178
140 -- 204
64
14
18
60
18 52.5 94.5
74 106 16
92
20
70
20
65
110
94 134 20
25
88
25
80
130
114 164 25
30 108 30 102.5 160.5
134 194 30
35 128 35
134
199
156 216 30
35 150 35
145
217
170 234 32
38 164 38
161
237
190 260 35
42 184 42
185
269
Pivot Type Mount
Ds-STROKE DA DB DC DD DE DF DG DH
40 -- 48 15
50 -- 64 15
63 -- 78 20
80 -- 108 20
100 -- 144 25
30
10
14 1015
8
5.5
DI
177 M 6×16
33
10
14 1015
9
5.5
208 M 6×18
38
12
15 1220 10 7.5
248 M 8×22
44
15 16.5 1520 12 7.5
307 M 8×25
50
18
18 1825 15
9.5
383 M10×25
112 -- 156
28
54
18
9.5
416 M10×30
125 -- 178
30
59
20
9.5
457 M10×30
140 -- 204
34
64
22
20 1810 16
2pcs.
23 2010 17
2pcs.
2210
25
19
2pcs.
11
518 M12×35
DE : Bearing Size No.
6
SCD-40-48〜140-204
Outline Dimensions
O
Ae : Effective area (mm2 )
N : Wrench flat width
■ OUTLINE DIMENSIONS
Dc −STROKE
A
B
C
D
E
F
G
H
I
J
K
L
−
−
−
−
−
−
−
−
53
63
82
100
120
137
150
165
116
141
175
220
284
313
346
392
42
45
50
58
65
72
76
84
10
12
16
20
25
25
30
35
20
20
24
32
40
44
48
52
M 8×1
M 10 × 1.25
M 12 × 1.5
M 16 × 1.5
M 20 × 1.5
M 22 × 1.5
M 24 × 1.5
M 27 × 1.5
6
6
7
10
12
13
14
16
Rc 1/8
Rc 1/8
Rc 1/4
Rc 1/4
Rc 1/4
Rc 3/8
Rc 3/8
Rc 3/8
9
10
12
14
14
18
18
18
9
10
12
14
14
18
18
18
42
50
63
80
98
112
125
140
M 6 DP 9
M 6 DP 9
M 8 DP 12
M 8 DP 12
M10 DP 15
M10 DP 15
M10 DP 15
M12 DP 18
40
50
63
80
100
112
125
140
48
64
78
108
144
156
178
204
M N
17
17
19
24
30
32
36
41
8
10
13
17
22
22
24
30
O
P
Q
R
S
T
86
109
135
172
230
251
274
312
8
8
9
10
11
12
16
16
7 51.5 61 M 5
8 61.5 73 M 6
11 78.5 94 M 8
14
97 114 M 8
16 117.5 136 M 10
19 135 156 M 12
20 149 170 M 14
24 164 190 M 14
Ae
PUSH PULL
1100 1020
1770 1650
2730 2530
4540 4230
7240 6750
8820 8330
11100 10400
14100 13300
※：径40のみ2Dは24mm
L Type Mount
Ds-STROKE A A AB AC AD AE AF AG AH AI
AJ AK
40 -- 48
35
53
35
5
6.5 25
10 166 17 186
50 -- 64
40
63
40
6
7.5 26
11 193 19 215
63 -- 78
50
82
50
6
9.5 31
14 237 19 265
80 -- 108 60 100 60
8
9.5 35
17 290 23 324
100 -- 144
75 120 70
8
12
40
20 364 25 404
112 -- 156
85 137 80
8
14
44
23 401 28 447
125 -- 178
95 150 87
10
14
46
24 438 30 486
140 -- 204 100 165 95 10
16
46
24 484 38 532
M6
×
14
M6
×
14
M8
×
20
M8
×
20
M10
×
25
M10
×
25
M10
×
25
M12
×
30
Front Flange Type Mount
Ds-STROKE BA BB BC BD BE BF BG BH BI
40 -- 48
70
35
53
6.5
50 -- 64
80 100 40
63
7.5
63 -- 78 105 130 55
82
9.5
90
80 -- 108 120 150 70 100 9.5
100 -- 144 150 180 85 120 11.5
112 -- 156 166 195 100 137 14
125 -- 178 180 210 115 150 14
140 -- 204 195 225 125 165 16
7
M6
×
10
M6
×
10
M8
×
14
M8
×
14
M10
×
16
M10
×
16
M10
×
16
M12
×
20
9
125 33
10 151 35
12 187 38
13 233 45
14 298 51
15 328 57
16 362 60
19 411 65
s
c
uper
ylinder
Rear Flange Type Mount
Ds-STROKE BA BB BC BD BE BF BG BJ
40 -- 48
70
35
53
6.5
50 -- 64
80 100 40
63
7.5
63 -- 78 105 130 55
82
9.5
90
M6
M6
M8
125 -- 178 180 210 115 150 14
140 -- 204 195 225 125 165 16
12 237
×
14
M8
13 291
×
14
100 -- 144 150 180 85 120 11.5
M10
×
16
M10
×
16
M10
×
16
M12
×
20
167
10 196
×
10
80 -- 108 120 150 70 100 9.5
112 -- 156 166 195 100 137 14
9
×
10
14 363
15 400
16 438
19 495
Trunnion Type Mount
Ds-STROKE CA CB CC CD CE CF CG CH
40 -- 48
50 -- 64
63 -- 78
80 -- 108
100 -- 144
112 -- 156
125 -- 178
140 -- 204
64
14
18
60
18
74 106 16
92
20
70
20 70.5 115.5
58
100
88
25 87.5 137.5
94 134 20
25
114 164 25
30 108 30
110
168
134 194 30
35 128 35
142
207
156 216 30
35 150 35 156.5 228.5
170 234 32
38 164 38
173
249
190 260 35
42 184 42
196
280
Pivot Type Mount
Ds-STROKE DA DB DC DD DE DF DG DH
40 -- 48
50 -- 64
63 -- 78
80 -- 108
100 -- 144
DI
188 M 6 × 16
15
30
10
14 1015
8
5.5
15
33
10
14 1015
9
5.5
219 M 6 × 18
20
38
12
15 1220 10
7.5
263 M 8 × 22
20
44
15 16.5 1520 12 7.5
322 M 8 × 25
25
50
18
18 1825 15
9.5
399 M10 × 25
20 1810 16
2pcs.
23 2010 17
2pcs.
2210
25
19
2pcs.
9.5
439 M10 × 30
9.5
481 M10 × 30
11
570 M12 × 35
112 -- 156
28
54
18
125 -- 178
30
59
20
140 -- 204
34
64
22
DE : Bearing Size No.
8
SCS-160-82〜200-320
Outline Dimensions
F0 / F1 : Spring force at zero/full stroke (N)
Ae : Effective area (mm2 )
N : Wrench flat width
■ OUTLINE DIMENSIONS
Dc −STROKE
160 −
82
142
192
240
180 − 96
168
226
280
200 − 112
192
256
320
A
B
C
D UD E
184
274
185
94 35
351
425
227
321
205
104 40
410
493
244
364
225
120 40
462
560
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
Ae
SPRING FORCE
F0
F1
86
52 12.4
M30
M 12
176
− −
×
70 60
18 Rc 1/2 22 − 160
46 30
23 26 185 215 M16
18600 158.8 356.7
DP 18
253
− −
1.5
327
− −
115
60 11.9
M33
M 14
209
− −
80 64 × 20 Rc 1/2 22 − 176
50 36
26 30 205 238 M18
23800 205.8 490
DP 21
298
− −
1.5
381
− −
118
60 11.9
M36
M 16
238
− −
90 72 × 21 Rc 3/4 24 − 194
55 36
28 35 225 262 M20
29600 254.8 656.6
DP 24
336
− −
1.5
434
− −
L Type Mount
Dc −STROKE A A AB AC AD AE AF AG AH AI AJ AK
160 −
82
282
334
142
372
424 M12
×
115 185 105 13 18 49 26
19
192
449
501 30
240
523
575
180 − 96
331
387
425
481 M14
168
×
130 205 115 14 18 52 28
24
226
514
570 35
280
597
653
200 − 112
348
404
468
524 M16
192
×
140 225 125 14 18 52 28
40
256
566
622 35
320
664
720
Front Flange Type Mount
Dc −STROKE B A B B BC BD BE BF BG BH B I
160 −
82
142
192
240
180 − 96
168
226
280
200 − 112
192
256
320
9
203
293
220 260 140 185 16 × 19
75
370
20
444
249
M14
343
250 300 160 205 18 × 22
82
432
25
515
269
M16
389
275 320 180 225 18 × 25
95
487
25
585
M12
s
c
uper
ylinder
Rear Flange Type Mount
Dc −STROKE B A B B BC BD BE BF BG BJ
160 −
297
82
M12
387
142
220 260 140 185 16 × 19
192
464
20
240
538
180 −
96
353
M14
447
168
250 300 160 205 18 × 22
226
536
25
280
619
200 − 112
389
M16
509
192
275 320 180 225 18 × 25
607
256
30
320
705
Trunnion Type Mount
Dc −STROKE CA CB CC CD CE CF CG
160 −
180 −
200 −
82
142
215 295 40 60 205 60
192
240
96
168
235 325 45 63 225 63
226
280
112
192
260 350 45 65 250 65
256
320
92
137
175.5
212.5
113.5
160.5
205
246.5
122
182
231
280
CH
186
231
269.5
306.5
217.5
264.5
309
350.5
242
302
351
400
Pivot Type Mount
Dc −STROKE
DA DB DC DD DE DF DG D H D I
160 −
DG
DF
82
142
192
240
180 − 96
168
226
280
200 − 112
192
256
320
38
42
45
70
77
85
25
28
30
348
438
515
589
408
502
32 2812 24 12.5
591
2ケ
674
449
569
34 3012 26 14
667
2ケ
765
28 2510 21
2ケ
11
M12
×
40
M14
×
45
M16
×
50
DE : Bearing Size No.
10
SCD-160-82〜200-320
Outline Dimensions
Ae : Effective area (mm2 )
N : Wrench flat width
■ OUTLINE DIMENSIONS
Dc −STROKE
160 −
180 −
200 −
A
B
C
D UD E
F
G
H
I
J
K
82
230
M30
320
142
94 35 70 60 × 18 Rc 1/2 22 22 160
185
192
399
1.5
240
475
96
260
M33
168
368
205
104 40 80 64 × 20 Rc 1/2 22 22 176
226
459
1.5
280
544
112
292
M36
192
412
225
120 40 90 72 × 21 Rc 3/4 24 24 194
256
512
1.5
320
612
L
M 12
DP 18
M 14
DP 21
M 16
DP 24
M N
O
P
Q
R
S
T
Ae
PUSH PULL
132
222
23 26 185 215 M16 18600 17600
46 30
301
377
148
256
50 36
26 30 205 238 M18 23800 22500
347
432
166
286
55 36
28 35 225 262 M20 29600 28000
386
486
L Type Mount
Dc −STROKE A A AB AC AD AE AF AG AH AI AJ AK
160 −
180 −
200 −
82
328
380
142
418
470 M12
×
115 185 105 13 18 49 26
45
192
497
549 30
240
573
625
96
364
420
472
528 M14
168
×
130 205 115 14 18 52 28
52
226
563
619 35
280
648
704
112
396
452
192
516
572 M16
×
140 225 125 14 18 52 28
68
256
616
672 35
320
716
772
Front Flange Type Mount
Dc −STROKE B A B B BC BD BE BF BG BH B I
160 −
180 −
200 −
11
82
249
M12
142
339
220 260 140 185 16 × 19
75
192
418
20
240
494
96
282
M14
390
168
250 300 160 205 18 × 22
82
226
481
25
280
566
317
112
M16
192
437
275 320 180 225 18 × 25
95
537
256
25
320
637
s
c
uper
ylinder
Rear Flange Type Mount
Dc −STROKE B A B B BC BD BE BF BG BJ
160 −
82
142
192
240
180 − 96
168
226
280
200 − 112
192
256
320
343
433
220 260 140 185 16 × 19
512
20
588
386
M14
494
250 300 160 205 18 × 22
585
25
670
437
M16
557
275 320 180 225 18 × 25
657
30
757
M12
Trunnion Type Mount
Dc −STROKE CA CB CC CD CE CF CG
160 −
82
142
192
240
180 − 96
168
226
280
200 − 112
192
256
320
115
160
215 295 40 60 205 60
199.5
237.5
130
184
235 325 45 63 225 63
229.5
272
146
206
260 350 45 65 250 65
256
306
CH
209
254
293.5
331.5
234
288
333.5
376
266
326
376
426
Pivot Type Mount
DG
DF
Dc −STROKE
DA DB DC DD DE DF DG D H D I
160 −
394
484 M12
×
38 70 25 28 2510 21 11
563 40
2pcs.
639
441
549 M14
×
42 77 28 32 2812 24 12.5
640 45
2pcs.
725
497
617 M16
×
45 85 30 34 3012 26 14
717 50
2pcs.
817
82
142
192
240
180 − 96
168
226
280
200 − 112
192
256
320
DE : Bearing Size No.
12
13
MEMO
Fujikura BF Cylinders
14
Note:Specifications subject to change without notice for improvements and modifications.
Fujikura's Pneumatic Control Products Line
■ General Guide
■ Super Precision Air Regulators
■ Super Precision Air Relays
■ Compac Super Precision Air Regulators
■ Precision Air Regulators
■ Compact Precision Air Regulators
■ Precision Electro-Pneumatic Transducers
■ Precision Vacuum Pressure Regulators
■ Miniature Precision Vacuum Pressure Regulators
■ Miniature Regulators
■ Thin-Type Precision Air Regulators
■ Miniature Precision Air Regulators
■ Relief Regulators
■ Fujikura BF Cylinder
CAT. No. KS-572E
RSseries
RRseries
RS2
RPseries
RP2series
RTseries
RVseries
RV2series
RAseries
RBseries
RP1series
RG1series
VR1series
FCseries
SCseries
PCseries
TCseries
TDseries
}
CAT. No. KS-128E
CAT. No. KS-0394E
CAT. No. KS-129E
CAT. No. KS-0393E
CAT. No. KS-130E
CAT. No. KS-131E
CAT. No. KS-0305E
}
CAT. No. KS-794E
CAT. No. KS-183E
CAT. No. KS-198E
CAT. No. KS-187
CAT. No. KS-570-01E
CAT. No. KS-9137E
CAT. No. KS-570-02
CAT. No. KS-570-03
CAT. No. KS-0373
[ Please request respective catalog for detailed contents of each product.]
Control Equipment Division :
1- 840, Mihashi, Omiya-ku, Saitama 330-0856, JAPAN
+ 81- 48- 663 - 1820
Phone :
Facsimile : + 81- 48- 663 - 8630
E-mail
[email protected]
[email protected]
U Rhttp://www.fujikura-control.com/en/
L http: // www.fujikurarubber.com/
Printed in Japan©SBC