User`s manual

User's manual
Thank you for purchasing this product.
Read the operating instructions completely in order to be able to
use this product fully and safely.
After reading, keep this manual where you can refer to it easily.
CONTENTS
SATIS
DV-218-VH-W
This manual includes important safety and use information.
Please follow the cautions given in this manual.
In case an accident occurs as a result of improper usage, we
will in no case assume responsibility for damages.
Please give this manual to the next user when you move or
give this product to another person.
Names of parts...................................................................
Safety precautions..............................................................
Handling precautions..........................................................
Make sure of these points before use................................
Operation
1
3
7
9
Remote control unit............................................................
Preparations before use
(Power, Seat temperature, Water temperature).....................
How to use basic functions
(Shower, Bidet)...............................................................
(Posterior massage washing, Wide range washing,
Nozzle position adjusting)...............................................
(Drying)...........................................................................
(Deodorizing)..................................................................
How to use convenient functions
(Toilet flushing)...............................................................
(Power save)...................................................................
(Auto seat-open).............................................................
(Plasmacluster)...............................................................
(Relaxation music)..........................................................
(Dim light).......................................................................
(Convenient)...................................................................
Other references.................................................................
Maintenance
Maintenance of each part...................................................
Daily maintenance..............................................................
Removing the decorator panel...........................................
Removing the toilet seat lid and Cleaning..........................
When the deodorizing effect becomes weak......................
When toilet flushing is weak...............................................
When the spray strength is weak ......................................
Replacing the remote control unit batteries .......................
Cleaning the filter ..............................................................
Draining for periods of extended disuse.............................
Preventing freezing . ..........................................................
Troubleshooting
When you think this product has broken down...................
After-sale service ..............................................................
Specifications ....................................................................
Changing memory cards....................................................
11
表紙絵.eps
13
14
15
16
17
18
19
20
22
23
24
25
27
31
32
34
35
36
37
37
38
39
40
41
42
48
50
51
Names of parts
Overall view
Wall-mounted Remote
Control Unit
(See page 11.)
Caution
Label
Names of parts
Toilet Seat Lid
Body
Indicator (See below.)
Body Sensor (Top)
Toilet Seat Lid Release Lever
Nozzle (for posterior)
Flush Lever
Nozzle (for bidet)
Product No. Label
Memory Card Slot
Power Plug
(with ground fault protector)
Toilet Seat
Body Sensor (Bottom)
Ground Cord
Water Shutoff Valve
Open/Close Handle
(See page 2.)
Toilet
Water Supply Hose
* Operation is by remote control only.
Indicator
Deodorizing cartridge
全体図.eps
外観2.eps
POWER SAVE
Deodorizing Cartridge
Power Lamp
Power Save Lamp
Plasmacluster Indicator
Deodorizing
Cartridge
Receptacle Lid
Water shutoff vestrainer
Toilet strainer
Shower Toilet strainer
Open/Close Handle
OPEN
Shower Toilet Strainer
Toilet Strainer
* The strainer removes impurities and
foreign materials in the tap water.
A small amount of water will pour
out when the strainer is removed,
so place a wash basin or similar
container under it to catch the water.
* The strainer removes impurities and
foreign materials in the tap water.
A small amount of water will pour out
when the strainer is removed, so place
a wash basin or similar container under
it to catch the water.
Plasmacluster and room heater
* Use the water shutoff
valve to shut off the flow
of water to the toilet. Be
sure to keep this valve
open during use of this
product.
Memory card slot
便器ストレーナ位置.eps
ストレーナ.eps
Filter
(Air inlet)
Blower Outlet
Memory Card
Slot Lid
List of functions
Part No.
DV-218-VH-W
Shower, Bidet
○
W-power deodorization
3-mode
Full auto toilet flushing
○
Auto seat-open
○
Plasmacluster
○
Dim light
○
Relaxation Music
○
吹き出し口.eps
Names of parts
CLOSE
Safety precautions (Be sure to follow these precautions.)
Please read these Safety Precautions thoroughly before use in order to ensure correct use of this product.
Depending on the conditions, failure to heed the precautions concerning the items included here can have
serious consequences. Each of these items is extremely important in its connection with safety, so do not
fail to observe all of them strictly.
Safety precautions
Explanation of terms and symbols
WARNING
. . .
CAUTION .
. .
. . . .
Indicates dangerous situations where the user could suffer death or serious
injury if this product is used incorrectly.
Indicates dangerous situations where the user could suffer minor injury or
property could be damaged if this product is used incorrectly.
"Be careful!" (This symbol is used both for the above "WARNING" and
"CAUTION" items. Be sure to read these cautions and obey the instructions
given along with them.)
. . . .
"Must not be done!" (A general prohibition symbol.)
. . . .
"Follow the instructions as given!" (This is a general symbol giving
instructions for some action.)
FORBIDDEN
OBSERVE
WARNING
If you are using this product for a long
period of time, set the seat temperature
switch on "Off".
For the following persons, be sure to OBSERVE
set the seat temperature switch on "Off"
when they are using this product.
(Children, elderly persons, persons who are
sick, persons who cannot adjust the temperature
themselves, persons with weak skin, persons
who are taking medicines that make them drowsy,
such as sleeping medications, deeply intoxicated
persons, or persons who are extremely fatigued.)
If you are using the drying function for a
long period of time, set the dry switch on
"Lo".
For the following persons, be sure to set OBSERVE
the dry switch on "Lo" when they are
using this product.
(Children, elderly persons, persons who are
sick, persons who cannot adjust the temperature
themselves, persons with weak skin, persons
who are taking medicines that make them drowsy,
such as sleeping medications, deeply intoxicated
persons, or persons who are extremely fatigued.)
* If this product is being used for a long period of time with
the seat temperature switch on any setting other than
"Off", there is danger of low temperature burns.
* If the drying function is being used for a long period of time
with the dry switch on any setting other than "Lo", there is
danger of burns.
Absolutely do not allow anyone except
an authorized service technician to
disassemble, repair or modify this product.
*There is danger of electric shock, or fire, and this
product could malfunction, causing injury.
Do not pull out or insert the power plug
with wet hands.
*There is danger of electric shock.
DON'T
DISASSEMBLE
Never operate this product if it has a
damaged cord or plug or if the plug is
loose in the wall outlet.
*There is danger of electric shock or fire.
Safety precautions
WARNING
NO WET HAND
Do not splash water or cleanser on the
body or the power plug.
*There is danger of electric shock or fire.
DON'T POUR
WATER
FORBIDDEN
If there is danger of the water in this
product's water lines freezing, implement
the freeze prevention methods to prevent
damage. (See page 41.)
OBSERVE
*Freeze damage may cause fire or damage
household articles.
If the body, power plug, or power cord
are damaged (abnormal noise, odor,
smoke generation, high temperature,
cracks), pull the power plug out of the OBSERVE
outlet immediately, then request repairs.
* Neglecting to do so could cause electric shock or fire.
If water is leaking from the body or form the water
supply system, pull the plug out of the outlet and
close the water shutoff valve.
* Neglecting to do so could cause electric shock or
fire, or get the room soaking wet.
Keep the memory card in a safe place
where babies and infants cannot reach it.
*If they swallow the card by mistake, it could
block their windpipe.
FORBIDDEN
Do not attach this product to any water
source other than tap water.
*There is danger of electric shock or fire due to
internal corrosion in the mechanism.
FORBIDDEN
Do not nick, damage, carve, bend unduly,
水かけてだめ.eps
pull on, twist, bind or place heavy objects
on top of the power cord, or pinch it
FORBIDDEN
between two objects.
*The above could damage the electrical
conductors and cause electric shock or fire.
Use only the power supply of 220 VAC.
Do not use the power exceeding the
rating by plugging too many leads into a
FORBIDDEN
single socket.
*Incorrect use of the power could cause fire.
Pull the power plug out of the outlet
periodically and wipe it off with a dry cloth
to keep dust from building up on it.
*If this is neglected, it could cause fire.
OBSERVE
Safety precautions
CAUTION
For care of plastic parts, do not use any
cleanser other than those which are safe
to use on toilet seats (toilet cleanser, home
cleanser, bleach, benzene, paint thinner, FORBIDDEN
scouring powder, cresol).
*Use of such products could cause plastic parts to crack,
causing personal injuries.
When removing the strainer, be sure to
close the water shutoff valve.
When installing the strainer, tighten it
OBSERVE
fully so there is no gap.
* Failure to do so could result in water leakage
and flooded floor.
Do not bring lighted cigarettes, ashtrays or
other sources of fire near these parts.
*Doing so could result in fire.
A deodorizing fan is placed deep in the
deodorizing cartridge receptacle. Do not
insert your fingers or any object other than
FORBIDDEN
the deodorizing cartridge inside.
Do not climb on top of the toilet seat lid or
body.
*Doing so could damage it or result in injury.
*Fingers could be injured or it could cause
breakdown.
FORBIDDEN
傷める原因.eps
NO FIRE
Safety precautions
CAUTION
If hairline cracks appear in the ceramic
parts of the toilet, or if it breaks, absolutely
do not touch the damaged parts with bare
DON'T TOUCH
hands.
If this product is not to be used for an
extended period of time, drain the water
out of it and pull the power plug out of the
OBSERVE
outlet. (See page 40.)
*The damaged parts could cause injury. Replace it as
quickly as possible.
*Freeze damage may cause fire or damage household
articles.
*T h e w a t e r c o u l d b e c o m e d i r t y a n d c a u s e s k i n
inflammation.
Do not bend or crush the water supply
hose.
Do not bear down with your weight on or
climb on the water shutoff valve.
* Doing so could result in water leakage or
FORBIDDEN
cause injury.
*Doing so could cause water to leak and get
FORBIDDEN
the room soaking wet.
Handling precautions
Follow these precautions in order to prevent breakdown of this product.
Handling precautions
In case of thunderstorms, pull the power plug
out of the outlet.
*Lightning surges could cause accidents or
breakdown of this product.
Do not place a stove or heater close to the
body.
*Doing so could cause product discoloration
or damage.
Do not expose this product to the direct rays
of the sun.
*Plastic parts could become discolored by the
sunlight.
Do not open or close either the toilet seat lid
or the toilet seat with great force.
*Doing so could crack or otherwise damage it,
causing an electrical hazard.
ストーブだめよ.eps
カミナリ.eps
Do not clean the toilet with hot water. Also do
not subject the toilet to impacts.
*Doing so could damage the toilet or cause it
to leak.
Do not lean against the toilet seat lid during
use.
*Doing so could damage it.
太陽だめ.eps
Do not wipe the body, toilet seat, toilet seat便フタ乱暴.eps
lid
or other plastic parts with a dry cloth or toilet
paper.
* Doing so could cause scratching of the
surface.
Do not use any paper other than the toilet
paper, and be careful not to drop any foreign
materials in the bowl, which may clog in the
piping.
If you drop anything by mistake, pick it up
before flushing the toilet.
Handling precautions
When there is danger of the water in this
product's water lines freezing, implement
the freeze prevention methods to prevent
damage.
(See page 41.)
If the toilet becomes clogged, use a
commercially available plunger (rubber cup)
to remove it. Do not flush the toilet when it is
clogged.
*Doing so could cause sewage to fill the toilet
bowl and overflow onto the floor.
Before using this product for the first time, take a few minutes to make sure of the following points.
1
Make sure the water shutoff valve is open.
If the water shutoff valve is closed, turn the open/close handle 90°
to the left.
Open
Open State
CLOSE
OPEN
Make sure of these points before use
Make sure of these points before use
Water Shutoff Valve
Open/Close Handle
2
Insert the power plug in the outlet.
1. Connect the ground cord to the ground terminal of a receptacle.
2. Insert the power plug in a 220 VAC outlet.
Power Plug
3. Make sure the power lamp on the power indicator lights up.
The power lamp on the power indicator will light up (green).
止水栓開.eps
POWER SAVE
Power Lamp
220V.eps
Confirm that the posterior shower works.
1.With your forearm resting on the toilet seat,
press the POWERFUL shower button.
2.When the nozzle extends, cover the tip of the
nozzle with your hand to catch the spray when
the shower begins spraying.
Roll up your sleeve and rest your
arm directly on the toilet seat.
At this time, water sprays
from near the nozzles as a
preparatory operation.
3.Press the stop button to stop the shower.
Check the other functions while looking at the operating
instructions(On page 11 and subsequent pages).
* This product is equipped with an occupied seat sensor that senses
when a person is sitting on the toilet seat. Posterior washing does
not operate if you do not touch the toilet seat.
Setting the clock
*Be careful with the AM and PM settings.
Press the Hour, then the Minute buttons to set the time.
(remote control unit: See pages 12)
Time Setting Buttons
Time Display
WARNING
Use only the power supply of 220 VAC.
Do not use the power exceeding the
rating by plugging too many leads into
a single socket.
FORBIDDEN
* Incorrect use of the power could cause fire.
外観2.eps
10
Make sure of these points before use
3
Operation
≪ Remote
control unit ≫
Main operation panel
Remote Control Unit Transmitter
TOILET SEAT OPEN/CLOSE
Use this when opening
and closing the toilet
seat. (See pages 20 and
21.)
* The emitter is also provided on the right side of the control unit.
FLUSH
Top
Use when flushing
the toilet.
(See page 18.)
Front
Moves the nozzle
forward or
backward, washing
a wider range.
(See page 15.)
WIDE RANGE
NOZZLE POSITION
Adjust the washing
position. (See page 15.)
Operation
STOP
Stops posterior
washing, bidet washing,
and drying operations.
MASSAGE
Alternates between
strong and mild
spray.
(See page 15.)
Indicator Lamp
If a dim light is included, this
indicator will indicate it by
blinking when the dim light
goes on.
SHOWER
BIDET
Use for bidet washing.
(See page 14.)
POWERFUL
DRY
STRENGTH
Blows air for drying.
(See page 16.)
MILD
Use when washing
the posterior.
(See page 14.)
Adjusts the spray
strength during
posterior and bidet
washing.
(See page 14.)
Time
LCD
(See page 10.)
Dry indicator
Battery indicator
This picture appears when the
battery power is low. (See page 38.)
★
Indicates the air temperature of the
drying function. (See page 16.)
Spray strength indicator
Indicates the spray strength
during posterior and bidet
washing. (See page 14.)
*The above figure shows the case where all the indication marks are displayed at once.
*On models equipped with dim light function, the LCD has a backlight to make it easy to see. When you operate any switch,
the backlight keeps lighting for 5 seconds.
*If you stand in front of the toilet, the deodorizer starts working automatically. (See page 17.)
11
Open the cover of the remote control unit.
Sub-operation panel
Operation
Sub-operation panel (under lower half of main operation panel)
POWER SAVE
AUTO FLUSH
Flushes the toilet
automatically when you
stand up from the toilet
seat. (See page 18.)
POWER
WATER TEMP.
PLASMACLUSTER ION
Lowers seat and water
temperatures to save
power. (See page 19.)
Provides ions to make
the room comfortable.
(See page 22.)
LIGHT
Turns this product's
Lights up the floor and
power on/off.
inside the toilet bowl.
壁リモコン開ける.eps
(See page 13.)
(See page 24.)
Hr/Min
Use to set the time on
the clock.
(See page 10.)
Adjusts the water
temperature. (See page 13.)
SEAT TEMP.
Adjusts the temperature of
the heated toilet seat.
(See page 13.)
AUTO SEAT-OPEN
VOLUME
Automatically opens and closes
the toilet lid alone, or both the
toilet lid and seat, by sensing
your presence. (See page 20.)
Adjusts the volume.
(See page 23.)
MUSIC
(Stop button): Stops the music from playing.
(Play button): Plays and selects the music.
(See page 23.)
NOZZLE CLEANING
Cleans the nozzles.
(See page 33.)
12
≪ Preparations
before use ≫
Check the following operations before using this
product to make it even more comfortable to use.
WATER TEMP.Switch (Heating the shower)
POWER ON/OFF Button
Adjust the water temperature using the
water temperature switch.
Press the power button to turn the power
on or off.
The switch can be set on 4 settings, High, Middle, Low
and Off. Set it at the temperature you prefer.
(Turning the power on/off)
*The power lamp in the power indicator will light
up if the power is on.
Operation
SEAT TEMP. Switch
(Heating the toilet seat)
Adjust the seat temperature using the seat
temperature switch.
The switch can be set on 4 settings, High, Middle, Low
and Off. Set it at the temperature you prefer.
WARNING
If you are using this product for a long period
of time, set the seat temperature switch on
"Off".
For the following persons, be sure to set the OBSERVE
seat temperature switch on "Off" when they
are using this product.
(Children, elderly persons, persons who are sick,
persons who cannot adjust the temperature themselves,
persons with weak skin, persons who are taking
medicines that make them drowsy, such as sleeping
medications, deeply intoxicated persons, or persons
who are extremely fatigued.)
* If this product is being used for a long period of time with the
seat temperature switch on any setting other than "Off", there
is danger of low temperature burns. Adjust the toilet seat
temperature with the seat temperature switch.
13
Reference
The toilet seat doesn't become war m
instantly. If you set the temperature 10
to 15 minutes before use, the toilet seat
temperature will be at a comfortable level
during use.
This product is equipped with a "seat
heater auto off" function that prevents low
temperature burns by switching off the
toilet seat heater automatically when it is
occupied. (See page 25.)
The toilet seat temperature (set at medium)
can be decreased (2°C). (See page 25.)
≪ How
to use basic functions ≫
Shower function
After the tip of the nozzle extends, the shower sprays
the posterior.
POWERFUL: Washes your posterior with
strongly sprayed water.
MILD: Washes your posterior with softly
sprayed water.
3
Press the stop button to stop
the shower.
*An automatic self-stop function is included which
stops both posterior and bidet washing
automatically after 2 minutes.
CAUTION
In places where the tap water pressure is low and spray
strength becomes weak, the nozzles may not extend. In
such a case, turn the strength dial to a higher setting.
Please sit fully on the toilet seat. If you sit fully on the
seat, there will be less water splashing.
After the tip of the nozzle extends, the shower
sprays the delicate female parts.
1
Press the bidet button.
2
Turn the spray strength dial to
adjust the spray strength.
Operation
1
Press the POWERFUL or MILD
shower button.
Bidet function
The strength dial can adjust the shower/bidet
strength over a range of 6 steps. Set it at the
strength you prefer.
To make the
strength weaker,
turn the dial
counterclockwise.
To make the
strength stronger,
turn the dial
clockwise.
*The strength is indicated by the
spray strength indicator in the
LCD.
Reference
This product is equipped with a function which makes the
spray strength weaker for persons who think the spray
strength is strong even at the weakest setting. (See page 26.)
14
Wide range washing function
Posterior massage washing function
The nozzle will move back and for th during
posterior or bidet washing to wash a wide area.
Spray strength is alternated between strong and weak
during posterior washing to provide massage effect.
Operation
1
Press the wide rang washing
button.
1
Press the massage washing
button during posterior washing.
2
To stop wide range washing, press the
wide rang washing button again.
2
To stop the massage spray, press
the massage washing button again.
Nozzle position adjusting function
The nozzle position during posterior or bidet washing can be adjusted over a total of 5 steps.
Press the FRONT or REAR nozzle
position button.
* If you stand up, the nozzle position will return
automatically to the initial position.
15
Initial Position
Drying function
Warm air will be blown out and the parts which were wet by the shower will be dried.
1
Press the dry button.
2
Press the dry button again to change
the temperature of the warm air.
Each time the button is pressed, the warm air
temperature setting changes in the sequence
"Hi" "Mid" "Lo".
*The warm air temperature is
indicated in the LCD.
Operation
3
Press the stop button to stop the drying
function.
*A self-stop function is included that stops drying automatically after
4 minutes.
WARNING
If you are using the drying function for a long
period of time, set the dry button on "Lo".
For the following persons, be sure to set the
dry button on "Lo" when they are using this OBSERVE
product:
(Children, elderly persons, persons who are sick,
persons who cannot adjust the temperature themselves,
persons with weak skin, persons who are taking
medicines that make them drowsy, such as sleeping
medications, deeply intoxicated persons, or persons
who are extremely fatigued.)
*If the drying function is being used for a long period of time
with the dry button on any setting other than "Lo", there is
danger of burns.
Reference
After shower use, wiping lightly with toilet paper
to remove the water drops, and then pressing
the dry button will help you dry off faster.
This product is equipped with a "low drying
temperature start" function which switches the
drying temperature from the high temperature
starting pattern to the low temperature starting
pattern. (See page 25.)
16
Deodorizing function
If the toilet is equipped with auto
seat-open function
1
Deodorizing starts when a person
stands in front of the toilet.
*When detecting the presence of a person, the toilet
seat activates the deodorizing fan in "full power mode"
to remove odors.
Operation
2
Sit on the seat.
*The deodorizer shifts to "power mode" to remove odor
in the toilet bowl.
3
Stand up from the seat.
*The deodorizer fan's capacity is raised again and it
changes to "full power mode," eliminating the odor.
*The deodorizer automatically stops in 1 minute after you
stand up.
*This product is equipped with a deodorizing cartridge
which absorbs odors from the toilet. (See page 36.)
Stops after 1 minute.
To disable the deodorizing function
Press the stop and bidet buttons
simultaneously for 2 seconds or longer.
*A "beep, beep" sound is emitted when it is set, and its
fan does not operate even when a person stands in
front of the toilet.
*To enable the deodorizing function, press the stop and
bidet buttons simultaneously for 2 seconds or longer.
17
Press simultaneously for 2 seconds or longer.
≪ How
to use convenient functions ≫
Toilet flushing function
There are 3 ways to flush the toilet.
1. Full auto flushing, in which the toilet flushes automatically after several seconds when the
person using the toilet stands up.
2. Remote control flushing, which flushes the toilet when the FLUSH button on the remote
control unit is pressed.
3. Manual flush, which flushes the toilet when the flush lever on the side of the low tank is
pressed.
1. Full auto flushing
Set the auto flush switch to ON.
2
When not using the auto flushing function,
set the auto flush switch to OFF.
* When full auto flushing is selected, full flushing or partial flushing is selected according to the length of time a person
occupies the toilet seat.
50 seconds: Full flushing
Less than 50 seconds: Partial flushing
However, if the shower washing is used, full flushing is performed even if the seat is occupied for less than 50 seconds.
* In this mode, flushing is automatically started approximately 6 seconds after the user stands up from the toilet seat. This
start time can be changed to approximately 15 seconds after the user stands up. (See page 26.)
* If a male person stands in front of the toilet with the seat opened for 6 seconds or longer, partial flushing is performed in 1
second after you leave the toilet.
CAUTION
Do not turn the power off during flushing of the toilet. If the power is turned off or if there is a power failure during
flushing, water will just continue flowing. In such a case, close the water shutoff valve. When the power goes on again,
the flush lever will return to its original position. (See page 30.)
2. Remote control flushing
Press the FULL flush button for full flushing.
Press the PARTIAL flush button for partial flushing.
3. Manual flush
Turn the flush lever approximately
45° forward the rear of the toilet.
Flush Lever
Approximately 45°
* If the PARTIAL button is pressed during a bowel
movement, the flushing operation may not be complete.
*A "peep" sound is emitted from the body, and the toilet is
flushed automatically.
CAUTION
* The above method cannot be used to flush the toilet when
there is a power failure. Flush the toilet using the method
described for "Flushing when there is a power failure" to
flush the toilet under such conditions. (See page 29.)
18
手動洗浄.eps
Operation
1
Power save function
The power save function includes 2 functions for saving power: Power save and one-touch power save.
1. Power save lowers the water temperature and toilet seat temperature at all times except when the
toilet is used.
2. The one-touch power save suppresses power consumption by turning off the toilet seat heater
and water heater for a period of 8 hours during an extended period when this product is not being
used.
By using it together with power save, the power saving effect can be even further enhanced.
Operation
1. Power save (always on)
1
2. One-touch power save (8 hours)
Press the power save button for 2 seconds
or longer. (The indicator lamp will blink. See below.)
1
Press the power save button.
(The indicator lamp will blink. See below.)
Example: When the power off timer is set at 10 o'clock
Set
Power save
temp.
OFF
During
use
Recover
Power save
Seat temp.
Seat temp.
Set temp.
Recover
Set
8:00 10:00 12:00 14:00 16:00 18:00 20:00 22:00 24:00
Set temp.
Power save
temp.
8 hours
OFF
*Power save functions at all times while
the toilet seat lid is closed. When power
save is operating, the indicator lamp
blinks 2 times.
POWER SAVE
*When the seat lid is open, power save mode is
temporarily cancelled. (The power save lamp lights up.)
*While the one-touch power save is operating, the power
save mode cannot be canceled. Press the power save
button to release the power off timer.
2
To turn off the power save, press the power save
button for 2 seconds or longer. (The indicator lamp goes off.)
*The indicator lamp blinks once while the
one-touch power save is operating.
POWER SAVE
*When 8 hours have passed, the function
automatically returns to the originally set state and the
power save lamp changes from blinking to off.
*The one-touch power save can be set any number of
times in one day.
2
To turn off the power off timer, press the
power save button. (The indicator lamp goes off.)
*When power save is operating, the toilet seat are lowered, so they may feel cold. In such a case, cancel the power save
function.
*Even when the power save button is off, leaving the toilet seat lid closed is an effective way to save power.
19
Auto seat-open function (Toilet seat and lid open/close)
* Depending on the model, this function may not be included.
The auto seat-open function is classified into 2 types; non-touch open/close and open/close by a
remote control switch.
1. Non-touch open/close: When a user stands in front of the toilet, the toilet seat lid opens
automatically. When the user leaves the toilet, it closes after about 1 minute.
2. Open/close by a remote control button: The seat opens or closes when you press a switch on
the remote control unit.(See page 21.)
1. Non-touch open/close
Operation
1
Set the auto seat-open switch to
"1" or "2".
Body Sensor
"1": The lid opens/closes
automatically.
Lid
2
"2":The lid and seat open/
close automatically.
Lid and Seat
To turn off this function, set the
AUTO SEAT-OPEN switch to OFF.
* When a person is detected by the body sensor and the occupied seat sensor, the toilet seat lid opens/closes automatically.
* When a small child is using the toilet, turn the auto seat-open switch on the remote control unit in the OFF position. In the case
of a small child, the occupied seat sensor cannot detect anybody's presence, and the toilet seat lid will start to close during use
of the toilet on rare occasions.
20
2. Open/close by remote control
1
Press the toilet seat open/close
button.
Body Sensor
Top
Operation
2
To close the toilet seat, press the
toilet seat open/close button again.
* When you set the auto seat-open switch to "1" or "2",
the seat (or seat and lid) closes in about 1 minute
after you leave the toilet.
* When a person is detected by the body sensor and the occupied seat sensor, the toilet seat lid opens/closes automatically.
* When a small child is using the toilet, turn the auto seat-open switch on the remote control unit in the OFF position. In the case
of a small child, the occupied seat sensor cannot detect anybody's presence, and the toilet seat lid will start to close during use
of the toilet on rare occasions.
21
Plasmacluster (ion generator) function
The plasmacluster function has the following 2 modes.
Clean Mode:Plasmacluster ions (both positive and negative ions) have an effect against the floating
mold spores that are the source of odors and suppress their propagation.
Refresh Mode: The proportion of negative ions is increased and works inside the toilet to create a comfortable
balance of ions that resembles the freshness of the air in a forest or near a waterfall.
The clean mode and refresh mode switch automatically when a person is detected by the body
sensor.
Press the plasmacluster ion button.
Operation
1
(The indicator lamp will light up.)
Ions will be provided from the outlet, and auto operation will start.
2
To stop operation or when you desire not to
use this function, press the plasmacluster ion
button again. (The indicator lamp will go off.)
* The ion generator operates continuously in the clean mode for 1 hour after the button is
pressed, and then switches to intermittent operation.
* When a person is detected, the plasmacluster ion generator automatically switches to the
refresh mode and the indecator lamp lights up green.
When a person's presence is not detected, it switches to the clean mode and the indicator
lamp lights up blue.
Indicator Lamp
Set
Clean
ON
OFF
1 hour
50 min.
Refresh
10 min.
During use
10 min.
50 min.
ON
OFF
* When the plasmacluster is operating, a "chirping" sound is emitted. If you notice this sound, press the plasmacluster ion
button and turn it off.
* There is a slight odor of ozone generated by the ion generator, but its concentration is minute and does not have a bad
effect on anyone's health.
22
Relaxation music
Relaxation music is a function that plays music from speakers mounted on both sides of the body.
The music play function is of two types, auto play and manual play.
1.Auto Play: When you stand in front of the toilet and open the toilet seat lid, music begins playing
automatically, and when you finish and leave the toilet, closing the toilet seat lid, the music stops
automatically.
2.Manual Play: You can play music or stop it any time you wish by pressing a button.
1. Auto play (This function is turned ON at the factory setting.)
Operation
1
Music begins playing automatically
when you stand in front of the
toilet and open the toilet seat lid.
* The selected music plays repeatedly.
3
To change the music selection,
press the music play button.
2
To adjust the volume, open the cover
of the remote control unit and turn the
volume dial to the desired level.
The volume can be adjusted in 7 steps to match
the desired volume level.
To turn down
To turn up
* The memory card is stored with 4 songs and 4 background
sounds when this product is shipped from the factory.
4
Dream of Love
Aria on G string
Nocturne No. 2
Song of Spring
Background Sounds
Music
1.
2.
3.
4.
5. Birds twittering and chirping
6. Insect sounds
7. Babbling brook
8. Koto playing
To stop the music, press the stop
button.
5
When you leave the toilet, the music's
volume drops and it stops playing.
When you desire not to use auto play
Press the stop button and play button
simultaneously for 2 seconds or longer.
* When the operation is accepted, a "beep, beep"
sound will be emitted.
* To play music again, press the stop button and play
button for 2 seconds or longer.
23
Press simultaneously for 2 seconds or longer.
2. Manual play
1
Cancel auto play.
(See the previous page.)
* The memor y card is stored with 4 songs and 4
background sounds when this product is shipped from
the factory.
5.Birds twittering and chirping
6.Insect sounds
7.Babbling brook
8.Koto playing
To stop the music, press the
stop button.
Dim light function
Press the music play button.
Music will start playing.
3
To change the music selection,
press the music play button.
4
To adjust the volume, open the operation
panel cover and turn the volume dial.
Operation
5
Background Sounds
Music
1.Dream of Love
2.Aria on G string
3.Nocturne No. 2
4.Song of Spring
2
* Depending on the model, this function may not be included.
If a person is detected, a dim light will illuminate the base of the toilet and the inside of the toilet bowl.
1
Press the dim light button.
(The indicator at the center of the STOP
button will light up.)
2
Press the dim light button again
when turning off or not using
the lamp.
* If the person's presence ceases, the light will go off
automatically.
Reference
The dim lamps are auxiliary lamps. It is not replaceable with the main light.
It is possible to turn off only the dim lamp in the bowl. (See page 26.)
While the dim light is lit, a shadow in the bottom of the toilet bowl might look like dirt.
24
Convenient functions
Toilet seat heater auto off function
To reduce the chance of low temperature burns, this product has a toilet seat heater auto off
function which turns off the toilet seat heater when someone sits on the toilet seat. Use the
following procedure to enable or cancel the toilet seat heater auto off function.
Setting or canceling
Press the stop button and POWERFUL shower button
simultaneously for 2 seconds or longer.
(After it is set, a "beep, beep" sound will be emitted.)
Release this function by repeating the same procedure.
Operation
* The toilet seat heater resumes operation automatically when
you stand up from the toilet seat.
Press simultaneously for 2 seconds or longer.
Changing the (medium) temperature setting of the seat.
The seat temperature (medium) can be decreased
by 2°C in the following procedure.
Press simultaneously for 6 seconds or longer.
Setting or canceling
Press the power save button and nozzle cleaning
button simultaneously for 6 seconds or longer.
(After it is set, a "beep, beep" sound is emitted.)
Medium temperature change can be cancelled in the
same method.
Low drying temperature start function
The dry function can be set to start on the low temperature setting. This function is convenient
for elderly persons, handicapped persons or persons who are particularly sensitive to heat. Use
the following procedure to enable or cancel the toilet seat heater auto off function.
Setting or canceling
Press the stop button and dry button simultaneously for
2 seconds or longer.
(After it is set, a "beep, beep" sound will be emitted.)
Release this function by repeating the same procedure.
Press simultaneously for 2 seconds or longer.
Muting the buzzer sound
The buzzer sound emitted during operation can be muted.
The signal reception sound from remote control unit and auto seat-open operation sound are
also muted set in the procedure below.
Setting or canceling
Press the stop button and MILD shower button
simultaneously for 6 seconds or longer.
(After it is set, a "beep, beep" sound is emitted.)
Muting can be cancelled in the same method.
25
Press simultaneously for 6 seconds or longer.
Full auto flushing start time
Full auto flushing starts automatically approximately 6 seconds
after the user stands up. This starting time can be changed to
start after approximately 15 seconds. Change the setting to the
start time you prefer using the following procedure.
Press simultaneously for 2 seconds or longer.
Switching the flushing start time
Operation
Press the nozzle cleaning button and wide range
washing button simultaneously for 2 seconds or longer.
(After it is set, a "beep, beep" sound will be emitted.)
Return this setting to the original setting by repeating the
same procedure.
Switching the dim light
The dim light illuminates the floor around the base of the toilet and the inside of the toilet when
a person is detected.
Only the dim lamp in the bowl can be turn off in the
Press simultaneously for 2 seconds or longer.
following method.
Switching the dim light
Press the stop button and REAR nozzle position button
simultaneously for 2 seconds or longer. (When it is set, a
"beep, beep" sound will be emitted.)
Return this setting to the original setting by repeating the
same procedure.
For persons who would like to make the spray strength still weaker
Persons who think the "weak" setting for the shower spray and bidet spray is still too strong
can adjust the spray strength using the following procedure.
Setting or canceling
Press the stop button and the PARTIAL flush button
simultaneously for 2 seconds or longer. A "beep,
beep" sound will be emitted and the spray strength
will become weaker.
To return to the original setting, press
simultaneously for 2 seconds or longer.
*In places where the tap water pressure is low, the nozzles
may not spray water at all with the shower strength at the
weakest setting.
To return the setting to the original setting, press the
stop button and the FULL flush button
simultaneously for 2 seconds or longer.
A "beep, beep" sound will be heard and the setting
will return.
To make the spray strength weaker, press
simultaneously for 2 seconds or longer.
26
≪ Other
references ≫
Operation
A slight odor may be emitted when the drying
function is first used.
This product is equipped with an
occupied seat sensor.
While this product is still new, there may be a slight odor
when using the drying function. The odor will disappear as
the toilet is used.
This product is equipped with an occupied seat sensor
that prevents the water from spraying if nobody is sitting
on the toilet seat. Therefore, if you are not seated on
the toilet seat, the shower washing, bidet washing,
deodorizing and drying functions will not operate.
A toilet seat cover or toilet seat lid cover can cause the
occupied seat sensor to either remain on continuously or
not go on at all, leading to faulty operation.
This product may interfere with radio or
television reception.
If a radio or television is brought near this product, it may
cause interference with reception. In this case, move
the radio or television away from this product until the
interference ceases.
*If there is a power failure while you are seated on
the toilet and the power is recovered while you are
still seated there, it may be impossible for the shower
washing and other operations to function. At such a
time, stand up, and then sit down again after waiting 1
to 2 seconds.
Slow down toilet seat and toilet seat lid.
Toilet cleansers
Do not use chlorinated cleansers, acid
cleansers or disinfecting cleansers.
If used for cleaning the plastic parts, crack
will develop, resulting in accidents. See
"Safety precautions" on page 6.
If used for cleaning the toilet bowl (ceramic),
the vaporized gases could damage this
product function.
What about the water pouring
out near the nozzles?
When you sit on the seat, before and after you perform
cleaning,or when you turn on the water temperature, water
pours out around the nozzles.This is due to this product's
structure and not a sign of breakdown.
*If water sprays under any other circumstances, or sprays
constantly, close the water shutoff valve and pull the power plug
from the wall outlet. Then, contact the store where you purchased
the Shower Toilet.
To prevent the toilet seat and toilet seat lid from being
lowered forcefully, a damping mechanism is provided to
lower them gradually.
*If the toilet seat or toilet seat lid is closed roughly or too
forcefully, this product could be damaged.
Energy saving
The following items are effective to help save
energy.
Close the toilet seat lid after use.
Do not keep the temperature of the toilet seat or
the warm water inordinately high, but adjust it to a
level where it won't cause you discomfort.
Adjust the temperature settings frequently to
match the air temperature.
Use the power save functions on models
equipped with these functions.
If you will be gone for extended periods, be
sure to turn the power off while you are away.
* If there is danger of freeze damage, implement the freeze
prevention measures. (See page 41.)
27
Remote control unit
The battery indicator will blink on the remote
control unit when the batteries are nearly
exhausted. Replace the batteries with new
ones as soon as possible. (See page 38
concerning battery replacement.)
If the remote control unit's buttons are
pressed with the toilet room door open, on
rare occasions, the signal may not reach this
product receiver and it will fail to operate.
A body sensor is built into this product which detects
that a person is standing in front of the toilet or not,
and opens and closes the toilet seat lid automatically.
It can detect a person if they are standing immediately
in front of the toilet, but if they are standing at an angle,
or at a certain distance from it, it cannot detect their
presence and may not open the toilet seat.
Body Sensor
Operation
*Depending on the size of the room, the wall
finish and color, the remote control unit may stop
functioning before the battery indicator starts
blinking. (due to the signal becoming weak)
Auto seat-open
<For models equipped with seat and seat lid auto open/close>
Battery Indicator
Condensation
Due to differences in temperature between the room and
the toilet, or between the front surface temperature of the
toilet seat or humidity, water drops (condensation) may
form on the toilet or toilet seat. To prevent condensation,
please maintain adequate air circulation. In addition, if
condensation forms, wipe it off with a dry cloth.
*Condensation could run on the floor, causing wrinkles in or
damage to the flooring.
*This toilet is designed to make it difficult for condensation to
form, but there may be some condensation depending on
room temperature and other conditions.
28
Flushing the toilet when there is a power failure
When a power failure occurs, the toilet cannot be flushed using the remote control unit.
Flush the toilet using the following procedure.
1. Turn the flush lever 90°and hold it in that state.
Water will flow from around the top of the
toilet bowl and cause the contents of the toilet
bowl to wash down to the bottom of the bowl.
Operation
2. Turn the flush lever 90°and hold it in that state.
Water will flow from the bottom of the toilet
bowl, flushing the contents down the drain.
3. Turn the flush lever 90°and hold it in that state.
Water will flow from around the top of the toilet
bowl and begin accumulating in the bottom of
the toilet bowl.
Turn approx. 90°
Inside the Toilet
Turn approx. 90° further.
Inside the Toilet
Return approx. 90°.
Inside the Toilet
洗浄方法1.eps
4. When water has accumulated sufficiently,
return the flush lever to its original position.
The flow of water will stop.
Return to original
* After flushing, be sure to return the flush lever to
its original position. (If this is not done, water will
flow continuously without stopping.)
Inside the Toilet
洗浄方法2.eps
Reference
The toilet can also be flushed by filling a bucket with water and pouring it directly into the toilet bowl.
洗浄方法3.eps
29
If the flushing water runs continuously without stopping
If there is a power failure or the power goes off for some reason during flushing of the toilet, water will flow
continuously.
Stop the flow of flushing water using the following procedure, and restore the toilet to normal when the
power comes on again.
1. Turn the water shutoff valve's open/close
handle to the right 90°.
The flow of flushing water will stop.
Closed State
Close
Operation
CLOSE
Water
Shutoff Valve
OPEN
Open/Close Handle
2. When the power comes on again, make sure
the flush lever is returned to its original
position (downward).
Flush Lever
3. Turn the water shutoff valve's open/close
handle 90° to the left.
Press the FULL or PARTIAL flush button on
the remote control unit and confirm that
flushing water is flowing.
Open State
Open
CLOSE
OPEN
Water
Shutoff Valve
Open/Close Handle
止
30
Maintenance
≪ Maintenance
of each part ≫
To use this product for a long period of time, carry out the following maintenance.
Changing the battery in the remote control unit
(See page 38.)
Removing the seat lid
as necessary
(See page 35.)
Cleaning or replacing the
deodorizing cartridge
(See page 36.)
Cleaning this product
strainer
(See page 37.)
Cleaning the room heater filter
(See page 39.)
Removing the
decorator panel
(See page 34.)
Cleaning the toilet seat
(See page 32.)
Maintenance
Cleaning the nozzles
(See page 33.)
Cleaning the toilet strainer
(See pages 37.)
WARNING
CAUTION
Do not splash water on the body or the
power plug.
* There is danger of electric shock or fire.
DON'T POUR
WATER
CAUTION
When cleaning this product, be sure to press the
power button and make sure the power lamp is off.
When cleaning the nozzle or using auto lift-up
function, be sure that the power is on.
31
Cleaning the toilet bowl
(See page 32.)
For care of plastic parts, do not use any
cleanser other than those which are safe
to use on toilet seats (toilet cleanser,
home cleanser, bleach, benzene, paint
thinner, scouring powder, cresol).
FORBIDDEN
*These substances can cause plastic parts to crack or
become marred, and can cause electric shock or fire.
≪ Daily
maintenance ≫
Cleaning the toilet seat, toilet seat lid and covers (plastic panels)
Dampen a soft cloth and wipe off the surfaces.
If dirt is left on the surface, it will become more difficult to remove. Wipe off the
surfaces frequently with a damp cloth.
Wiping with a damp cloth also prevents static electricity. Static electricity
attracts dust particles, and causes the surface to become dirty.
* On this product, the toilet seat lid can be removed easily. (See page 35.)
CAUTION
Avoid wiping with dry cloth or toilet paper.
* Doing so could result in scratches.
Cleaning the toilet (ceramic parts)
Do not use hot water.
It could damage the toilet.
Do not use a brush or cleanser including abrasive powder.
They will lessen the effects of Pro Guard.
Maintenance
* While the dim light is lit, a shadow in the bottom of the toilet bowl might
look like dirt.
CAUTION
Do not use chlorinated cleansers, acid
cleansers or poisonous cleansers.
* The vaporized gases could damage this product or cause
breakdown.
About anti-bacterial parts
Anti-bacterial plastics are used in the nozzles, toilet seat, toilet seat lid, body cover and flush lever. Antibacterial sheet is
used in the remote control unit's switch panel and an anti-bacterial glaze is used for the toilet bowl.
本体掃除.ep
32
《Cleaning nozzles》
Cleaning nozzles
Use the following method to clean nozzles.
1. Press the Nozzle Cleaning button on the remote control unit and clean the nozzles using water
pressure. "Remote control nozzle cleaning"
2. For hardened dirt, extend the nozzle electrically and clean it with a toothbrush or similar tool.
1. Remote control nozzle cleaning
Press the nozzle cleaning button on the remote control unit.
* The nozzles remain retracted inside the body. Cleaning continues for approximately 15 seconds.
* This product is equipped with an auto cleaning function which cleans the shower and bidet nozzles
and the area around them automatically.
2. Cleaning with a Sponge, etc.
①
1) Press the Nozzle Cleaning button on the remote controller.
* Water will spray out from around the nozzles.
Maintenance
2) Press the Shower or Bidet button within 15 seconds of
pressing the Nozzle Cleaning button.
②
* The corresponding nozzle will extend forward.
3) Clean the nozzle using a sponge or similar tool.
4) Press the Stop button to cause the nozzle to retract.
③
Sponge
CAUTION
Do not pull on the nozzles unduly.
* It causes them to be trouble.
When you pull the nozzles by mistake, pull the power plug out of
the outlet, wait about 30 seconds and insert in the power outlet.
Nozzle
④
手入れノズル.ep
33
≪ Removing
the decorator panel ≫
The decorator panel can be removed easily. Remove it when you clean the back of the toilet and portions
of the floor that are normally hidden
Removing the toilet seat lid
1. Press the power button and turn the
power off, then check to make sure the
power indicator is off.
Clip Holder
2. Pull the decorator panel down slowly
to pull the clip out of clip holder.
3. Lift up the decorator panel slowly to
disengage the pawl on the bottom of
the panel from its slot.
Decorator
Panel
Clip
Pawl
CAUTION
If this product is equipped with the relaxing music function,
speaker cords are attached to the body. Be careful not to
pull on these cords.
* Doing so could cause the wires to become disconnected
or damaged.
If these cords come off from their positions, reattach the
cords according to the instructions on the label attached to
the back of the panel cover.
Slot
Installing the Decorator Panel
2. Fit the clip on the top of the decorator
panel onto the clip holder on the toilet
body.
3. Make sure the decorator panel is
installed securely.
4. Press the Power On button and make
sure the power indicator is lighted up.
Maintenance
1. Fit the pawl on the bottom of the
decorator panel into the slot on the
toilet body.
Pawl
Decorator
Panel
Slot
Clip Holder
CAUTION
If this product is equipped with the relaxing music function,
speaker cords are attached to the body. Be careful not to
pull on these cords.
* Doing so could cause the wires to become disconnected
or damaged.
Clip
34
≪ Removing
the toilet seat lid and Cleaning ≫
Removing the toilet seat lid
1.Press the Power Off button and check the Power
indicator to make sure the power is off.
4.Pull the right side of the toilet seat lid
toward you, lowering it as you do so.
2.Open the toilet seat lid and turn the toilet seat lid
release lever up until a clicking sound is heard.
Toilet Seat Lid
Pull forward
and lower it.
Turn up
5.Slide the toilet seat lid to the left.
Slide
Toilet seat lid release lever
3.Raise the right side of the toilet seat lid and
disengage it from the hinge pin on the toilet seat.
Hinge pin
CAUTION
Raise up
Maintenance
Do not exert undue force on the toilet seat lid.
* Doing so could damage it.
Do not open the toilet seat with the toilet seat lid removed.
* Doing so could cause the cover or toilet seat to become scratched.
Installing the
toilet seat lid
ワンタッチ11.eps
1.Fit the left side pin hole of the toilet seat lid
on the toilet seat's left side hinge pin with the
right side of the toilet seat lid angled forward.
Hinge Pin
2.Set the right side pin hole of the toilet seat
lid on the toilet seat's right side hinge pin.
Fit it on with the toilet seat
lid at a slant.
Set
3.Turn the toilet seat lid release lever
down until a clicking sound is heard.
ワンタッチ12.eps
Pin Hole
Toilet seat lid release lever
Turn down
4. Press the power button and confirm that the power indicator is lighted up.
35
便フタ着脱13.
便フタ着脱14.
≪ When
the deodorizing effect becomes weak ≫
If dust and other foreign matter adheres to the deodorizing cartridge, it will be unable to eliminate odors
adequately. If you can sense an odor, clean the deodorizing cartridge.
Care of the deodorizing cartridge
1.Remove the deodorizing cartridge
cover.
3.Remove dust and other foreign material
from the filter using a toothbrush or a like.
Deodorizing Cartridge
Receptacle Lid
Filter
Pulling it down
CAUTION
rinsed in water.
2.Pull out the deodorizing cartridge.
Deodorizing Cartridge
The deodorizing cartridge cannot be
4.Return the deodorizing cartridge, and
attach the cover.
If you can smell an odor even after the deodorizing cartridge is cleaned, it means that the deodorizing
cartridge is at the end of its life. Replace it with a new one.
Under normal use conditions, the deodorizing cartridge should last approximately 7 years.
* The deodorizing cartridge service life is based on the average use time by a family with four members
(2 males and two females).
First, enter the date that use of this product first began in
the date entry column, then use that as the criterion for
replacement of the deodorizing cartridge.
The next time the deodorizing cartridge is replaced, enter
the date when use of that new cartridge began in the date
label on the new cartridge.
Enter the date when use of this product began.
Year
Month
Day
CAUTION
A deodorizing fan is placed deep in the deodorizing cartridge receptacle. Do not insert your fingers or
any object other than the deodorizing cartridge inside.
* Fingers could be injured or it could cause breakdown.
FORBIDDEN
36
Maintenance
Replacing the deodorizing cartridge
≪ When
toilet flushing is weak ≫
≪ When
the spray strength is weak ≫
If the toilet has been used for a long period of time and flushing begins to get weak, or the shower/bidet
spray seems to be getting weak, clean the strainers using the following procedure. (As a rule, the strainers
should be cleaned once every two years.)
Cleaning the strainers
1. Close the open/close handle on the water shutoff
valve to cut off the water supply.
Close
Water Shutoff
Valve
Open/Close Handle
If the spray strength is weak
If the toilet's flushing is weak
2. Carefully remove the decorator
panel at the right side of the toilet
body. (See page 34.)
2. Press the FULL flush button.
3. Turn the Shower Toilet strainer on
the bottom right of the body and
remove it.
* A small amount of water will pour out at this time, so
place a wash basin underneath to catch the water.
3. Carefully remove the decorator panel
at the right side of the toilet body. (See
page 34.)
4. Turn the toilet strainer and remove it.
* A small amount of water will pour out at this time, so place a
wash basin underneath to catch the water.
Toilet Strainer
Maintenance
Shower Toilet
Strainer
4. Remove the dirt adhering to the
inside of the strainer by rinsing it
止水
5. Remove the dirt adhering to the inside of
the strainer by rinsing it with water.
with water.
5. Return the strainer, tighten it fully.
6. Return the strainer, tighten it fully.
6. Open the water shutoff valve fully.
7. Open the water shutoff valve fully.
便器ストレーナ位置.eps
7. Finally, perform trial operation. (See page 10.)
CAUTION
水抜栓.eps
When removing the strainer, be sure to close the water shutoff valve.
When installing the strainer, tighten it fully so there is no gap.
* Failure to do so could result in water leakage and flooded floor.
37
OBSERVE
≪ Replacing
the remote control unit batteries ≫
The battery indicator blinks when the batteries have reached the end of their service life.
*Normally, the battery indicator is off.
*The batteries were used for operation checks while the remote control unit was
being made, so their service life may be short.
*Depending on the size of the room, the wall finish and color (particularly dark colors),
the remote control unit may stop functioning before the battery indicator starts blinking.
Replace the batteries with new ones using the following procedure.
CAUTION
Battery Indicator
Install the batteries with the positive and negative poles facing the correct
direction in accordance with the marks on the remote control unit case.
Do not use old and new batteries together.
Use alkaline batteries only.
Replacing the remote control unit batteries
1.Lift up the remote control unit and
remove it from its bracket.
Remote Control Unit
2.Remove the back cover and replace the batteries
with new ones (four 1.5 V size AA alkaline batteries).
(+)
Batteries
Back Cover
(-)
(-)
(+)
Bracket
Maintenance
3.Replace the back cover, and set the remote control unit back in its bracket.
4.Set the time, pressing the time setting buttons. (See page 10.)
壁リモコン電池交換2.eps
壁リモコン電池交換1.eps
38
≪ Cleaning
the filter ≫
If the filter on the air inlet gets clogged with dust, etc., capacity will be reduced. During normal periods of
use, clean the filter about once a month.
Cleaning the room heater filter
1.Remove the filter from the air inlet on
the back of the body.
Filter
2. Rinse the filter with water and remove the
dust and other matter from it. After drying the
filter, install it again in the air intake vent.
CAUTION
Backside of the body
Do not use this product with the filter removed.
* Doing so could cause breakdown.
Maintenance
フィルタ洗う.eps
フィルタ外す.eps
39
Draining for periods of extended disuse
In the following cases, be sure to drain the water from this product.
If this product will not be used for an extended period, such as when you are away on a trip. (The water
could become dirty and cause clogging.)
If this product is installed in a vacation home and that home is not being used. (In a house where
nobody is living, the temperature can drop a lot lower than expected and freezing can be caused.)
Draining the water and disconnecting the power
1. Turn off the water shutoff valve's
open/close handle to stop the flow of
water.
5. Press the MASSAGE ON/OFF switch
and NOZZLE CLEANING switch
simultaneously for 6 seconds or longer.
This drains the residual water from the body for
about 1 minutes.
Close
Water Shutoff
Valve
Open/Close
Handle
Press simultaneously for 6
seconds or longer.
2. Turn the flush lever to your side.
6. Tighten each strainer firmly and
disconnect the power plug from the outlet.
Flush Lever
about 180°
CAUTION
Shower Toilet Strainer
If there is particularly great danger of freezing,
bail or pump out the water in the toilet bowl,
and place antifreeze solution in it.
* If the water only is removed, bad odors will be emitted
from the soil pipe.
7.When using the toilet again, be sure to
perform trial operation to make sure it
functions properly. (See pages 9 and 10.)
If it freezes and the shower stops working
In the unlikely event that the water supply hose or
the water supply connection fittings become frozen
and the shower does not spray out, use a cloth
止水栓開.eps
dipped in warm water, etc. to heat up the water
supply hose or water supply connection fittings, or
heat the room inside to cause it to melt naturally.
CAUTION
Do not sprinkle hot water or blow hot air on
the water supply hose.
*It could cause damage to the water supply hose.
CAUTION
When removing the strainers, be sure that the water shutoff valve is closed.
Also, when installing the strainers, tighten them completely so there is no gap.
* If they are not fully tightened, it could cause water leakage.
水抜栓.eps
OBSERVE
40
Draining for periods of extended disuse
3. Remove the side panel on the left side,
open the toilet strainer and drain out
the water that is inside the flush valve.
(See page 37.)
4. Remove the decorator panel on the
right side and place a wash basin
underneath the Shower Toilet strainer
and warm water tank drain plug on the
bottom of the body, remove the strainer
and warm water tank drain plug and
drain the water out of the warm water
tank. (See page 37.)
Preventing freezing
If it becomes severely cold during the winter, the water in this product could freeze and cause damage. To
prevent freeze damage, perform the following measures.
Leave the power plug in the outlet and do not remove it by any means.
General freeze prevention measures
1.Set the water temperature switch on Hi
and the seat temperature switch on Hi,
and close the toilet seat lid.
If you are using the power save setting, cancel
the power save function.
2.Heat the toilet room.
If this product is equipped with a room heater,
turn the Chill Prevention switch on.
*If the toilet room cannot be heated, drain the water out of the body by the following procedure.
Drain the water from the body.
Preventing freezing
1. Close the water shutoff valve's open/close
handle to stop the flow of water.
2. Turn the flush lever to your side.
3. Remove the decorator panel. (See page 34.)
4. Place a wash basin underneath the toilet
strainer, then take out the strainer and drain
out the water in the flush valve.
5. Place a wash basin underneath the Shower
Toilet strainer and warm water tank drain plug
on the bottom of the body, remove the strainer
and warm water tank drain plug and drain the
water out of the warm water tank.
6. Press the Massage button and Nozzle
Cleaning button simultaneously for 6 seconds
or longer to drain out the remaining water.
(See page 40.)
7. Close the strainers, tightening them fully.
8. When the cleaning water stops pouring out,
return the flush lever to its original position.
9. Install the decorator panel. (See page 34.)
10. When using the toilet again, be sure to
perform trial operation. (See pages 9 and 10.)
Close
Water Shutoff
Valve
Open/Close
Handle
Flush Lever
about 180°
Toilet Strainer
Shower Toilet Strainer
便器ストレーナ位置
CAUTION
When removing the strainers, be sure that the water shutoff valve is closed.
Also, when installing the strainers, tighten them completely so there is no gap.
*If they are not fully tightened, it could cause water leakage.
41
OBSERVE
水抜栓.eps
Troubleshooting
≪ When
you think this product has broken down ≫
In some cases, troubles can be corrected easily, so before requesting repairs, please check the following
items. If the trouble cannot be corrected after these items are checked, consult with the shop where you
purchased the Shower Toilet.
All functions
Symptom
The system will not
operate at all.
Cause
Remedy
Electricity is not being supplied to
the power outlet.
Check for a power failure or tripped breaker,
etc.
The power switch is off.
Press the power button and get the power
lamp on the body power indicator to light up.
(See page 13.)
The power plug is not inserted in
the power outlet.
Insert the power plug in the power outlet.
(See page 9.)
Shower / Bidet washing
Symptom
Shower does not
spray out.
Cause
Remedy
The water shutoff valve is closed.
Turn the water shutoff valve to the left. (See page 9.)
Shower strainer is clogged.
Clean the shower strainer. (See page 37.)
The occupied seat sensor is not
on.
Change the way you sit on the toilet seat.
Sit back so that you are occupying the seat
fully. (See page 27.)
Shower is not warm.
The water temperature is not set to Press the seat temperature button and
an appropriate temperature.
adjust the toilet seat temperature to the
appropriate level. (See page 13.)
Shower strength is
getting weak.
Is the water temperature dropping? This is not a problem.
If the water temperature drops during
the winter, the shower strength may drop
somewhat.
Deodorizing
Symptom
Remedy
Is the toilet seat wet or soiled?
Clean the toilet seat.
Is the noise coming from the
operation of the plasma cluster?
If the plasma cluster switche is ON and air
is being blown from the outlet (See page 2.),
the sound is coming from this fan’s
operation and not from the operation of the
deodorizer fan.
42
Troubleshooting
The deodorizer fan
runs constantly.
Cause
Drying with warm air
Symptom
The dryer does not
work.
Dryer air is not warm.
Cause
Remedy
Is the occupied seat sensor ON?
Sit on the toilet seat. (See page 27.)
Air temperature is not set to an
appropriate level.
Press the Dry button and adjust the air
temperature to the appropriate level. (See
page 16.)
Warm air stops suddenly The drying function has been used Press the Dry button again. (See page 16.)
for 4 minutes or longer.
before finishing.
Heated Seat
Symptom
Toilet seat is not
warm.
Toilet seat becomes
less warm when
seated long.
Cause
Remedy
Toilet seat temperature is not set to Press the water temperature button
an appropriate temperature.
and adjust the water temperature to the
appropriate level. (See page 13.)
Power save is activated.
Cancel power save. (See page 19.)
The toilet seat heater auto off
function is operating.
Cancel the toilet seat temperature auto off
function. (See page 25.)
Remote control unit
Symptom
Can’t operate this
product with the
remote controller.
Cause
Remedy
The battery has lost its power.
(Battery lamp blinks.)
Change the battery with a new one. (See
page 38.)
Are the battery’s (+) and (-)
terminals correctly connected?
Insert the battery in correct direction. (See
page 38.)
Remote controller’s light emitting/
receiving part is dirty or wet with
water.
Remove dirt or water.
Troubleshooting
Full auto flushing
Symptom
The toilet does not
flush automatically.
43
Cause
The AUTO FLUSH switch is set at
OFF.
Remedy
Set the auto flush switch to ON. (See page
18.)
Relaxation music
Symptom
Cause
Is the memory card inserted?
Is the memory card inserted
securely?
Music doesn’t play.
Remedy
Insert the memory card fully in the slot. (See
page 51.)
Are the connectors to the speakers Remove the side cover and fit the speaker
disconnected?
connectors in the jacks provided. (See the
label on the back of the panel cover for the
method of connection.)
Is the auto play function turned
OFF?
Turn the auto play function on. (See page
23.)
Auto open/close of toilet seat and lid
Symptom
Cause
Remedy
The toilet seat and
toilet seat lid crash
down when closing.
Didn’t you press the seat lid
while it is opening or closing
automatically?
Press the seat open/close switch. If the seat
does not open or close automatically, pull
the power plug out of the outlet and request
for repair.
The toilet seat and
toilet seat lid does
not open or close
automatically.
The auto seat-open switch is in the
OFF position.
Set the auto seat-open switch in "1"or "2."
(See page 20.)
Troubleshooting
44
Auto open/close of toilet seat and lid (Continued)
Symptom
Cause
Remedy
The toilet seat and lid An excessively short distance is
do not open when you set for the (upper) body sensor.
approach.
Extend the detection distance of the (upper)
body sensor according to the procedure on
the next page.　If the lid is still closed, request for repair.
The seat lid keeps
open, or it repeats
opening ad closing
though there is no
person near the lid.
An excessively long distance is set
for the (upper) body sensor.
Shorten the detection distance of the
(upper) body sensor according to the
procedure on the next page.　If the lid is still open, request for repair.
When a man opens
the seat for urination,
it closes immediately.
An excessively short distance is
set for the (lower) body sensor.
Extend the detection distance of the (lower)
body sensor according to the procedure on
the next page.　If the seat and lid are still closed, request for
repair.
The seat and lid keep
open.
An excessively long distance is set
for the (lower) body sensor.
Shorten the detection distance of the (lower)
body sensor according to the procedure on
the next page.　If the seat and lid are still open, request for
repair.
Troubleshooting
45
■ Method of Adjusting Detection Distance of the Body Detection Sensor
When adjusting the detection distance of the (upper/lower) body detection sensors
• Close the seat and lid for the upper body sensor, and
• Open the seat and lid for the lower body sensor.
On the remote controller
Press the STOP + POWERFUL + BIDET switches simultaneously for 6
seconds or over.
The toilet body emits a peep sound and the POWER ON/OFF and
POWER SAVE ON/OFF indicator lamps brink alternately.
Adjustment mode lasts for 30 seconds. (*1)
To extend the
detection distance
Press the REAR nozzle position switch
on the remote controller. (*2) (*3)
To shorten the
detection distance
Press the FRONT nozzle position
switch on the remote controller. (*2) (*3)
On the remote controller
Press the STOP + POWERFUL + BIDET switches simultaneously for 6
seconds or over.
Stand in front of the toilet and check if the body sensor operates
normally; for example whether the seat lid opens automatically.
If the seat lid opens when you are away from the toilet or very
close to the toilet, readjust the sensors.
)
(*1) When the adjustment mode is established, follow the subsequent steps within 30 seconds. The adjustment mode is
cancelled in 30 seconds.
(*2) One push extends or shortens the detection distance about 10 cm.
Example: If you press the REAR switch once, the lid opens when you come to the distance 10 cm longer than the
distance sensed before adjustment.
(*3) If the detection distance reaches the limit of setting range, the toilet body emits the peep sound.
CAUTION In the adjustment mode, do not press any switch other than FRONT and REAR.
46
Troubleshooting
(
Others
Symptom
There are water drops
on the underside of
the toilet.
A gurgling sound is
emitted by the toilet
body.
Cause
The humidity is high and
condensation formed.
Remedy
Wipe it off frequently.
This is not a problem.
It is the sound of a motor operating
in order for this product to function
normally. There is no problem as
* When the power plug is
long as there is nothing abnormal
inserted in the outlet.
* When the power switch is in the shower strength adjustment
or the shower position.
turned on.
* When the shower or
bidet operations end.
No water is supplied to the shower
toilet body (for reasons such as
suspended water supply or closed
waster shutoff valve).
After supplying water, open the water
shutoff valve and carry out trial operation.
(See page 10.) If the power lamp still blinks,
remove the power plug and request for
repair.
The power indicator is
warm water or the toilet seat
blinking.
There is trouble either with the
If it blinks even after the power is turned off,
it indicates that there is trouble. Pull the
power plug out of the outlet and request
repairs.
If the indicator goes off when the power is
turned off, it indicates that it is time for this
product to be checked, so request a service
check as soon as possible.
The rear feet
(projections) at the
back end of this
product are not
attached to the toilet
(are floating free).
This is not a problem.
This product is designed so that the rear
feet (projections) float free. Leave it as it is.
functions.
Or it is time to check the shower
toilet.
Troubleshooting
47
After-sale service
1. Before Requesting Repairs
If this product breaks down, see "When you think this product has broken down" on page 42. If the trouble is
not repaired even after that, contact the store where you purchased this product. Furthermore, even if
there is no actual trouble, make inquiry in the following cases.
If there are any points that are unclear even though the product is used in accordance with the
user's manual.
If the power cord is damaged or the outlet is loose.
The outlet or the power plug and power cord are overheating.
In the above cases, if it is left as it is without correction, there is danger of some unforeseen accident
occurring, so please get some advice.
WARNING
WARNING
If the main unit, power plug, or power
cord are damaged (abnormal noise, odor,
smoke, high temperatures, cracking),
unplug the power plug from the power outlet
immediately, and have the part repaired.
COMPULSORY
Only authorized service
technicians are permitted to
disassemble, repair or modify
this product.
* There is a danger of electric shock,
fire, and injury.
* Failure to do so could cause electric shock or fire.
DO NOT
DISASSEMBLE
If water is leaking from the main unit or from the water
supply system, unplug the power plug from the power
outlet and close the water shutoff valve.
* Failure to do so could cause an electric shock or fire, or it
may cause the room to be flooded.
2. Read the Warranty Certificate
This product comes with a Warranty Certificate. You will receive your Warranty Certificate once the
store where you purchased this product has completed the relevant information.
Check the details of the Warranty Certificate, and keep it in a secure place.
The warranty period is 2 years from the date of installation.
Even during the warranty period, there are some repairs for which you will be charged. Check the
details of your Warranty Certificate carefully.
3. Requesting repairs
Repairs within the warranty period
When requesting repairs, be sure to present
the Warranty Certificate. Repairs will be
performed in accordance with the provisions of
the warranty.
1.Address, Name, Telephone No.
2.Type, Product No., Color No., Serial No.
(See the Product No. label on the reverse side of
the toilet lid.)
3.Date of installation (See your Warranty
Certificate.)
4.Description of malfunction or abnormal
condition. (Be as detailed as possible.)
5.Preferred date for house call
If repairing the product will keep it functioning,
then, at your request, the repairs will be made
on a chargeable basis.
Charges for repairs include: Technical service
fee + Travel expenses + Parts costs.
Type
Product No.
Color No.
Serial No.
After-sale service
Details you will be asked
Repairs after the warranty period has expired
48
外観2.eps
4. If you want to know anything about the product or after-sales service
Consult the shop where you purchased this product.
After-sale service
49
Specifications
Type
Maximum rating
Bowl washing method
Actual flow rate
Product dimensions
Product weight
Working water pressure
Remote controller
Water heating method
Nozzle
Music Purifying
play
air
Deod
orizin
Seat heating
Drying
Washing
Nozzle hole
Powerful but
mild washing
Bidet washing
Max flow rate
Powerful
washing
Mild washing
Bidet washing
Water supply method
Water heater capacity
Control temperature
Safety device
Air flow
Air heater capacity
Air temperature adjustment
Safety device
Heater capacity
Surface temperature
Temperature adjustment
DV-218-VH-W
AC220V, 50Hz, 1200W
Direct valve, large size
Full flush: 6L, Partial flush: 4.5L
Width 415mm × Depth 635mm × Height 540mm
Approx. 32kg
0.1 to 0.75MPa (20L/min during flowing)
Operated by 2 AAA alkaline batteries)
Continuous warm water supply
Motor for posterior and bidet
Posterior nozzle powerful and mild
Bidet foam soft bidet
φ 1.0 × 1
φ 0.7 × 5
0.50 ± 0.10L/min
0.50 ± 0.10L/min
0.55 ± 0.10L/min
Direct connection with
1090W
OFF (Water temp) Low (Approx 36°C)
Middle (approx 38°C) High (approx 40°C)
Temperature fuse, hot water output thermistor, thermostat
0.4m3 /min
265W
Low / Middle / High
Temperature fuse (2 pc)
48W
OFF (Room temp), Low (approx 28°C)
Middle (Approx 36°C) High (Approx 40°C)
Ion generator rated power
0.7W or less
Output
Memory
Compression method
Power saving
0.25W × 2（stereo）
SD card
MP3
Super power saving (for max 24 hours), quick power saving
(automatically reactivated in 8 hours)
Effective length: 1.2m
• Auto open/close seat　• Seat sensor (Electrostatic capacity type)
• Dim light • Seat lid one-touch attach/detach mechanism
• Back-lighted remote controller • Wide washing/Massage washing
•Hands-free full flush • Hands-free male urination flush
•Seat heater auto OFF function
Power cable
Other functions
CAUTION
This product is admitted to use only in your country. Do not use in any other countries.
50
Specifications
Safety device
Deodorizing method
Deodorizing capacity
Deodorizer cartridge life
Anti-bacteria ion operation mode
Selectable from 4 levels (under micro-computer control): OFF, Low,
Middle, and High
Thermal fuse
Chemical absorption by deodorizing cartridge
Pre/after deodorizing: 0.14m3/min, when seated: 0.11m3/min
Approx 7 years
Auto change between Clean and Refresh
Changing memory cards
1.Press the power button and turn the
power off, then check to make sure the
power indicator is off.
2.Down the lid, then push the memory
card all the way in and release it.
3.The memory card will pop out slightly.
Pull it out of the slot.
4.Insert the new memory card deep in
the slot, then close the lid.
5.Press the power button to turn this
product on, then check to make sure
the power indicator is lighted up.
Slot
Cut-off Corner
Lid
Memory Card
*Insert the memory card securely in the slot with the card
in the proper orientation.
If it is inserted wrongly, you will not be able to insert it far
enough, and the memory card could be damaged and
the stored data could be changed or erased as a result.
WARNING
Keep the memory card in a safe place
where babies and infants cannot reach it.
*If they swallow the card by mistake, it could
block their windpipe.
FORBIDDEN
*The sounds stored in the memory card cannot be used for any purpose other than with this product. Unauthorized use
of the music stored on the cards except for private personal enjoyment is a violation of applicable copyright laws and
intellectual property rights, and is therefore prohibited.
*Depending on the storage format and conditions, playing of music recorded by users themselves may not be possible
with this device.
Changing Memory cards
51
Dealer (Store name, Address, Tel.)
Koiehonmachi, Tokoname, Aichi 479-8585
TEL: 0569-35-2700 (representative)
Website: http://www.inax.co.jp/
GCW-1116A-W(08100)