warrior systems - Insight Technology

WARRIOR SYSTEMS
2016
L-3 Warrior Systems: Insight I ETO I IRP I ALST | EOTech I Mobile-Vision
Ta bl e o f Co n ten ts
1
Warrior Systems
Warrior Systems Divisions
2-3
Warrior Systems Capabilities
4-5
The most extensive portfolio of night vision and electro-optical
Aiming and Illumination Systems
6-7
products that serves all branches of the military and law enforcement.
Image-Intensified (I2) Systems
8-11
Thermal Imaging Systems
12-15
Fused Systems
16-17
Precision Targeting Systems
18-19
OEM Rangefinders and Designators
20-21
2
Image Intensifier (I ) Tubes
22-23
Focal Plane Arrays
24-25
Holographic Weapon Sights
26
Digital In-Car Video Safety Solutions
27
Large-Caliber Rail-Mount Systems
28
Logistics and Service
29
Contact and General Information
Headquarters
9 Akira Way
Londonderry, NH 03053 - USA
www.L-3com.com/WarriorSystems
[email protected]
Toll-Free Phone 866-509-2040
Phone603-626-4800
Fax
603-626-4888
Vendor Information and Support
Purchasing Department Fax 603-622-1776
Logistics Services and Technical Support
Repairs or RMA Request
Email
[email protected]
Toll-Free Phone
877-744-4802 (Ext. 6006)
Phone
603-551-6006
Military and Commercial Support Toll-Free Phone 877-744-4803
Thermal Imaging Systems
Gen III
White and Green Phosphor
I2 Systems
Product demonstrations or test evaluation
samples are available upon request.
L-3 Warrior Systems’ professional military and law
enforcement sales staff and trainers are available to
schedule product demonstrations and training. For more
information, contact L-3 Warrior Systems.
Product Sales
Sales of Class 3B/4 laser products are restricted to:
• U.S. Military
• Law Enforcement Agencies (state, local, municipal)
• Federal Agencies
• Qualified Third-Party Agents
Sales
Email
[email protected]
Toll-Free Phone
877-744-4802 (Ext. 6004)
Phone
603-551-6004
Business Development Fax
603-551-6039
Order Inquiry
Email
Toll-Free Phone
Phone
[email protected]
877-744-4802 (Ext. 6005)
603-551-6005
International Inquiries Email
Phone
[email protected]
603-626-4800
(8 a.m. to 5 p.m., ET)
Business Development Fax
603-551-6039
L-3 Warrior Systems is a world leader in the
development and production of advanced night
vision and electro-optical technology and systems
for the U.S. military, federal agencies, public
safety and sporting communities, and international
markets.
As part of L-3 Communications Corporation,
L-3 Warrior Systems is made up of leading and
complementary military and commercial divisions:
Insight Technology, EOTech, Electron Tube
Operations (ETO), Infrared Products (IRP),
Advanced Laser Systems Technology (ALST) and
Mobile-Vision, Inc. (MVI). Collectively, L-3 Warrior
Systems provides a broad range of technology
offerings and capabilities relating to aiming and
illumination devices, image intensifier (I2) tubes
and systems, thermal imaging systems and detectors, high-performance night vision and fusion
goggles, and precision targeting and wireless interconnectivity solutions. L-3 Warrior Systems also
offers training, repair and logistics services.
L-3 Warrior Systems provides the most extensive portfolio of products supporting warfighters, offering
all essential systems to enable them to accurately see, maneuver, locate, target and fire during the day,
at night or in adverse weather.
1
Divisio n s
Divisions
L-3 Insight Technology
L-3 Insight Technology is a
leading manufacturer of advanced
laser aiming, precision targeting,
night vision and EO/IR systems
and equipment to ensure safe
and successful operations for the
dismounted soldier as well as on
crew-served, airborne and marinebased platforms. For over 20 years,
Insight Technology products have
been supporting the military, law
enforcement and security agencies
by providing advanced visual
awareness solutions.
Aiming & Illumination Devices | Image Intensified Systems
Thermal Imaging & Fused Systems | Precision Targeting Systems
and Wireless Interconnectivity
ETO
L-3 Electron Tube Operations
(ETO), a business unit of Insight
Technology, is employed in the
large-scale manufacture of image-intensifying
tubes, including unfilmed and autogated, in both
green and white phosphor, for application to a
range of night vision products used by military
and commercial markets. ETO’s aviator‑grade
Gen III and Next-Gen night vision tubes are
used in weapon sights and goggle systems by
governments, warfighters, police units and others
that demand the most advanced and reliable
image-intensified (I2) systems available. ETO,
formerly Electro-Optical Systems, has a nearly 50year legacy of producing image intensifier tubes
and has produced more than one million units.
Gen III Green and White Phosphor
Image Intensifier (I2) Tubes
L-3 Insight Technology
L-3 Infrared Products (IRP), a
business unit of Insight Technology,
produces a range of uncooled, longwave, wafer-level and vacuum-packaged
infrared Focal Plane Arrays (FPAs) that are
incorporated into a wide variety of thermal imaging systems
and fused solutions for military and commercial applications.
The IRP FPA is based on state-of-the-art amorphous silicon
material that provides outstanding response and image
quality over a broad temperature range. The performance
of this FPA is excellent in the long-wave IR spectrum, but
it also provides good response in the mid-wave spectrum
when that option is selected. IRP’s is the only uncooled
FPA that can operate at very high frame rates with no loss
in performance. The current product line includes its 17 μm
320 x 256 FPA and 17 μm 640 x 480 FPA.
IRP
L-3 EOTech develops and manufactures commercial products that leverage its
advanced electro-optics technologies. The advanced holographic weapon sight
has revolutionized electronic sighting technology and is being adopted rapidly
around the world as the preferred and standard sights.
Holographic Weapon Sights | Magnifiers
2
L-3 Advanced Laser Systems
Technology (ALST), a business unit
of Insight Technology, is a full-service
designer and manufacturer of military-grade eye-safe
laser rangefinder, laser designator and multi-function laser
systems. An ISO 9001-certified quality organization for
nearly a quarter century, ALST has designed and delivered
thousands of lasers for fielded customer applications
spanning “Submarines to Satellites,” including shipboard,
ground and airborne assets. ALST is a standard kit on many
mainstream military programs and has a track record of
reliability, accuracy and ease of use over the course of tens
of millions of laser shots fired.
Eye-Safe Laser Rangefinders
Ground Laser Target Designators
Airborne Multi-Function Laser Systems
Crew-Served Ground Vehicles | Dismounted Soldiers
High-Performance Uncooled
Focal Plane Arrays
L-3 EOTech
ALST
L-3 Mobile-Vision, Inc.
Mobile-Vision
MVI
L-3 Mobile-Vision, Inc. (MVI) is a premier provider of technology
platforms for public safety, including in-car video solutions, license
plate recognition systems and body-worn cameras, with one of
the most comprehensive digital evidence management
solutions on the market. For over 29 years, MVI has been
delivering reliable systems that allow agencies to capture
and manage critical information in an effective manner.
Mobile Video Solutions for Public Safety
In-Car Video | Body-Worn Cameras
Automatic License Plate Recognition Systems
3
Ful l Spe c t r um
Ca pa bi l i t i e s
C a pab ilities
F u l l S p e c tru m
C a p a b i l i ti e s
Capabilities
World Leader in the Development and Production
of Advanced Night Vision and Electro-Optical
Military Systems and Commercial Components
• Aiming and Illumination Systems
• Thermal Imaging Systems
• Image Intensified (I2) Systems
• Thermal Imaging and Fused Systems
• Precision Targeting Systems
L-3 Warrior Systems’ Headquarters, Londonderry, NH - USA
Complete Design, Manufacturing,
Quality and Logistics Capabilities
+
• WPAN® Wireless Interconnectivity
• Night Vision Goggles
• Image Intensifier (I ) Tubes
Serving Customers
Around the World
2
• Eye-Safe Laser Rangefinders
• Advanced Technology
• Design and Engineering
• On-Site Optical and Precision
Machine Shops
• On-Site Weapon and Optical Ranges
• Product Qualification and Certification
• Field Testing and Training
• Product Assurance
• Integrated Logistics Support
• Technical Manuals, Training
and Spare Parts
• Supply Chain and Configuration
Management
• Import/Export Control
• Laser Designators
• Multi-Function Laser Systems
• Focal Plane Arrays
• Holographic Weapon Sights
• Digital In-Car Video Systems
• HD Body-Worn Cameras
• U.S. Military
• Law Enforcement
• Homeland Security
• Federal Agencies
• State Department
• Allied Nations
• OEM for Unmanned
Air, Ground and
Underwater Systems
• Commercial Consumer
Markets
• NASA - Space-Based Systems
The Quality Management Systems (QMS)
of L-3 Insight Technology is Certified
to the Requirements of ISO 9001:2008
4
5
Aiming and Illumination Systems
AN/PEQ-15
Advanced Target Pointer Illuminator Aiming Laser (ATPIAL)
Aiming and Illumination Systems
AN/PEM-1
Laser Borelight System (LBS)
Available in standard, high- or ultra-high power, this rugged device is a
small, lightweight, easy-to-use aiming system with integrated infrared (IR)
and visible aim lasers as well as an IR illuminator.
The LBS provides a fast and precise means of boresighting any aiming
laser, day optic, iron sight or thermal weapon sight to a host weapon
without the need for live weapon fire.
Features
Features
• Co-aligned visible and IR aim lasers
• Hardened for use on small arms and crew-served weapons
• Mandrels available for a wide array of weapon systems
VISIBLE LASER RADIATION. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EXPOSURE TO BEAM. CLASS 3B LASER PRODUCT.
LA-5/PEQ Advanced Target Pointer Illuminator Aiming Laser –
High Power (ATPIAL-HP)
The ATPIAL-HP is a small, lightweight, easy-to-use aiming system with
integrated IR and visible lasers as well as an IR illuminator.
Features
• Co-aligned visible and IR aiming lasers
• Heavy weapon and machine gun-hardened
• Significantly reduced size and weight over the AN/PEQ-2A
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EXPOSURE TO BEAM. CLASS 3B LASER PRODUCT.
SU-261/PVS
Mini Red Dot Sight (MRDS)
Available with 3.5 or 7.0 MOA
Black or Tan Available
The MRDS is a passive, red dot, reflex weapon sight designed for rapid
target acquisition in close quarters engagement. The MRDS attaches
directly to most common mini red dot sight mounts, which in turn allows
it to be hosted on a wide variety of optical sighting devices and weapons.
Features
• Automatic and manual red dot intensity settings to accommodate
nearly any ambient lighting conditions, including operating with night
vision goggles
• Top-loading battery compartment enables battery replacement without
the need to remove the MRDS from the weapon, thereby preserving zero
AN/PEQ-16B LED
Mini Integrated Pointer Illuminator Module (MIPIM)
The MIPIM is a compact multi-function laser device incorporating visible
and IR aim lasers as well as an IR and white light illuminator.
Features
• Integrated IR aim laser, IR illuminator, visible aim laser, and white light or
LED illuminator
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EXPOSURE TO BEAM. CLASS 3B LASER PRODUCT.
SU-277/PSQ
Ballistic Sighting Module (BSM)
The BSM is a compact, weapon-mounted aiming device used to provide
precise firing of M203, M320 and other low- to medium-velocity, largecaliber weapon systems. An integrated red dot sight, as well as IR aim
and illumination lasers, provide for increased firing accuracy in any
lighting condition.
Features
VSLIM
Variable Small Laser Illuminator Module (VSLIM)
The VSLIM is a handheld or weapon-mounted, high-powered IR laser.
It is used with night vision devices for long-range target acquisition and
illumination. The versatility of the VSLIM is enhanced through features
such as user-selectable power settings and pulse rates.
• Linkable to our rangefinder to provide “slant angle” ballistic solutions
• Ballistic tables for multiple launcher and munition types
• LCD display for distance, cant indication and low-battery indicator
Remote Activation
Switch Available
INVISIBLE LASER RADIATION. AVOID EXPOSURE TO BEAM. CLASS 3B LASER PRODUCT.
Features
• Nine user-selectable power levels
• May be used with remote cable switch for enhanced control of
laser activation
INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION.
CLASS 4 LASER PRODUCT.
6
7
Image-Intensified (I 2) Systems
AN/PVS-7
Night Vision Goggle (NVG), (M963)
The NVG with Gen III night vision image tube is typically worn either
head- or helmet-mounted. When used with optional helmet-mount,
goggle will automatically shut off in the stowed position. An integrated IR
LED illuminator provides short-range illumination, allowing such activities
as map reading, night repairs or maintenance tasks in extreme darkness.
Features
Self-Contained System
With Single AA Battery Operation
• Hands-free or one-hand operation
• High-light cut-off tube protection
• Low-battery indicator in eyepiece
Image-Intensified (I 2) Systems
AN/PVS-31
Binocular Night Vision Device (BNVD) Green Phosphor
The BNVD is a rugged, compact, lightweight, Gen III
dual-tube goggle with an ergonomic, low-profile design
and offers superior situational awareness compared to a
single-tube goggle. The BNVD is a follow-on to our legacy
battle-proven AN/PVS-15, but offers more features for
increased survivability.
Available for BNVIS or
Aviator’s Night Vision Imaging
System (ANVIS) Mounts
The BNVD’s twin-tube design provides protection in the field against
failure or damage versus a single-tube NVG. It can be used as a
monocular when necessary to allow for the dominant and non-dominant
eye by rotating either the left or right optic into the stowed position.
Features
AN/PVS-14
Night Vision Device (M914A)
The AN/PVS-14 is the U.S. military standard for night vision and can be
used as either a handheld pocketscope, a right or left eye-mounted
monocular, or a weapon sight when mounted in conjunction with an
IR laser aimer or other night vision-compatible primary optic.
• Manual adjustable gain
• Auto OFF when stowed; resumes
power when deployed
• Internal low-battery indicator
visible in optic when ≥ 10 min.
• Replaceable I2 tubes
Features
• Single AA battery operation
• Low-battery indicator in eyepiece
The BNVD Provides Dominant/Non-Dominant Eye Relief
AN/PVS-31A
Binocular Night Vision Device (BNVD) White Phosphor
AN/PVS-15
Aviation Night Vision Goggle (M953)
Self-Contained System
With Single AA Battery Operation
These compact/lightweight Gen III binoculars can be handheld or helmetmounted. Automatic brightness control and high-light cut-off tube protection.
Particularly suited for operations where depth perception is critical for
mission performance, such as controlling land vehicles and boats at high
speeds, and is submersible to 66 feet. An integrated IR LED illuminator
provides short-range illumination, allowing such activities as map reading.
Features
• Twin-tubed design comparable to aviation systems
• Low-battery indicator in eyepiece
AN/AVS-9 and AN/AVS-6
Night Vision Goggle (M949)
The AN/AVS-9, with Gen III night vision, provides improved situational
awareness with large 25 mm eyepieces and enhanced binocular viewing for
optimized depth perception for improved 40° field-of-view. Ergonomically
designed interface controls include interpupillary, vertical, fore/aft and
tilt adjustments. Comes with Power Pack that securely attaches to flight
helmets and has multiple helmet-mount options.
Features
8
Gen III Night Vision Image Intensifier (I2) Tubes
Are Available in Green and White Phosphor
• Optional Class A and Class C (“Leaky Green”) filters
• Clip-On Power Supply (COPS) for pre-flight or dismounted operations
The AN/PVS-31A is a compact, lightweight, Gen III dual-tube goggle
with improved white phosphor tube technology for greater target
detection and recognition. Low-light and nighttime maneuvers
appear more natural in black and white, with added contrast
detail in shapes and shadows providing the operator more visual
information for assessment and acquisition. White phosphor offers
various shades of intensity between black and white (over black and
green), resulting in better contrast and depth perception.
The device has an ergonomic low-profile design and offers superior situational
awareness compared to a single tube goggle. Working directly with input
from SOF operators, the BNVD was designed to increase system resolution,
significantly reduce head-borne weight, improve system center of gravity, provide
additional operational utility, and improve overall situational awareness compared
to currently fielded dual-tube goggles. The white phosphor BNVD is a followon to our legacy, battle-proven AN/PVS-15 and AN/PVS-31 standard green
phosphor night vision goggles.
Features
• Manual adjustable gain
• Auto OFF when stowed; resumes
power when deployed
• Internal low-battery indicator visible
in optic when ≥ 10 min.
• Replaceable I2 tubes
Continually raising the standard for superior
image resolution and range performance with
Gen III White Phosphor night vision tubes.
9
Image-Intensified (I 2) Systems
Image-Intensified (I 2) Systems
AN/PVS-18
GPNVG
The AN/PVS-18 can be used as a handheld pocketscope, right or left
eye-mounted monocular, or a weapon sight when mounted in conjunction
with an IR laser aimer or other night vision-compatible primary optic.
The GPNVG is a helmet-mounted night vision device with a
wide 97o horizontal field of view that allows for observation
and/or target identification in low-light conditions and is
ruggedized for ground applications. Individual monoculars
can be detached from the system and powered with included power
adapter to provide a low-profile handheld night vision monocular.
Night Vision Monocular (M983)
Features
• Can be combined with an SLR camera, CCTV or camcorder system
• Self-contained system with 20 m immersion capability operating
on a single AA battery
Clip-On Night Vision Device – Image-Intensified (CNVD-I2)
AN/PVS-24/A (M2124)
A night vision sight that clips onto the MIL-STD-1913 rail in front of the
existing day optic without altering day optic zero. Designed for use with a
4x magnified optic, this device can be used in the handheld or weaponmounted configuration. Manual gain and focus adjustment enable the
operator to optimize the sight picture.
Ground Panoramic Night Vision Goggle (GPNVG)
Features
• 97o field-of-view
• Interpupillary Distance (IPD), tilt and fore/aft adjustments depending on the system’s bridge
• Available with ANVIS or BNVIS mount for use with
multiple helmet and mount configurations
• Environmental qualification per MIL-STD-810G
• Modular design for maintenance and supportability
Panoramic Night Vision Provides a Wide 97o Field-Of-View
• Field-replaceable tube design
Gen III Night Vision Image Intensifier (I2) Tubes
Are Available in Green and White Phosphor
Features
• Compact and lightweight
• Low-battery indicator and battery reverse polarity protection
• AA or CR123 battery power
BNVIS Mount Available
ANVIS Mount Available
Clip-On Night Vision Device – Long Range (CNVD-LR)
(M2124-LR)
Based upon the successful AN/PVS-24/A and designed for use with 3x
to 10x magnified day optics. Enables long-range target identification and
engagement at night.
Ruggedized BNVIS Mount Available
Compact Design and
Optional Power Adapter
Provide Handheld
Capability
Features
• Compact and lightweight
• Low-battery indicator and battery reverse polarity protection
• AA or CR123 battery power
Advanced technology provides
a wide field-of-view for
increased situational awareness.
10
11
Thermal Imaging Systems
LWTS-LR
®
Available with 320 x 240; LWTS-LR 384
Thermal Imaging Systems
AN/PAS-13G(V)1
Light Weapon Thermal Sight – Long Range
Light Weapon Thermal Sight (LWTS)
The LWTS-LR is a next-gen long-range weapon-mounted thermal sight.
The thermal imaging capability of the LWTS-LR allows for long-wave
infrared observation and target identification under adverse conditions,
including light rain, smoke, light snow and low light to total darkness.
The LWTS-LR utilizes leading-edge 17 µm technology in a 640 x 480
uncooled microbolometer. The high-resolution display, combined with
state-of-the-art image processing and electronics, provides exceptional
imagery and long-mission run times on a single battery load.
The Light Weapon Thermal Sight (LWTS) is a handheld and
weapon-mounted thermal weapon sight. The thermal imaging
capability of the LWTS allows for long-wave infrared observation
and target identification under adverse conditions, including light
rain, smoke, light snow and low light to total darkness.
Features
• Expands clip-on thermal capability of LWTS across full spectrum of medium and heavy caliber weapon platforms
®
Features
• Clip-on and stand-alone thermal capability
• 640 x 480 17 μm uncooled microbolometer
• RS-170 Real-Time Video In/Out for remote viewing
• Optional WPAN® wireless pod available
• Improved Detection, Recognition, Identification (DRI) range relative
to standard LWTS
• RS-170 real-time video in/out for remote viewing
White-Hot Thermal View
• Integrated shutter for hands-free non-uniformity calibration
Toll-Free: 866-509-2040
www.L-3com.com/WarriorSystems
Black-Hot Thermal View
• Optional WPAN® wireless pod available
Can Be Used as a
Handheld Stand-Alone
Long-Range Thermal Sight
Weapon-mounted or handheld
target identification through
light rain and snow, smoke and
low light to total darkness.
12
13
Thermal Imaging Systems
Thermal Imaging Systems
MTM-PI
CRATOS
Mini Thermal Monocular – Product Improvement
Clip-On Ruggedized Advanced Thermal Optical Sight
The pocket-sized MTM-PI is a handheld thermal imaging device
with an integrated laser designator and digital camera. The digital camera
enables acquisition, storage, download, recall and viewing of thermal
images and videos with improved 17 μm 640 x 480 FPA.
The Clip-On Ruggedized Advanced Thermal Optical Sight
(CRATOS) is a miniaturized all-in-one thermal weapon sight designed for
handheld, clip-on or stand-alone use. The thermal imaging capability of
the CRATOS allows for observation and target identification under adverse
conditions, including light rain, smoke, light snow, and low light to total
darkness. Its integral laser pointer allows for handoff of target
positions to the warfighter with night vision goggles.
Features
• Available with either IR or visible laser pointer
• Tripod-Mountable
• Optional LCD screen for larger viewing area
• Optional cable enables capture, download and storage of hundreds of
thermal images
INVISIBLE LASER RADIATION. CLASS 1 LASER PRODUCT.
Features
• All-in-one thermal weapon sight (handheld, clip-on and stand-alone)
• White Hot, Black Hot or Multi-Color thermal imaging capability
• 640 x 480 17 µm Focal Plane Array (FPA) with 60 Hz frame rate
• Shutter offers automatic and manual calibration
• 3-button remote
• Operates on 2 AA batteries
Removable Rail Mount
Maximizes Handheld
Ergonomics
INVISIBLE LASER RADIATION. AVOID EXPOSURE TO BEAM. CLASS 3B LASER PRODUCT.
MTM-PI With Optional 3x Extender Lens
Thermal View
WTM-PI
Weapon Thermal Monocular – Product Improvement
Based upon the Mini Thermal Monocular design, the rugged, lightweight
WTM-PI has a Picatinny rail interface and is designed to withstand the recoil
of tactical loads. It can also be used handheld or tripod-mounted. This
WTM-PI allows for high-resolution observation and target identification under
adverse conditions from low to no light and features an integrated
laser pointer.
Black-Hot Thermal View
White-Hot Thermal View
Multi-Color Thermal View
Features
• Available with either IR or visible laser pointer
• Optional 3x extender lens for long-range, man-sized detection
• Optional LCD screen for larger viewing area
• Optional cable enables capture, download and storage of hundreds of
thermal images
• WTM-PI offers 640 x 480 resolution
VISIBLE AND INVISIBLE LASER RADIATION. AVOID DIRECT EYE EXPOSURE. CLASS 3R LASER PRODUCT.
LCD Screen for
Larger Viewing
14
Digital Camera Capture
and Download
15
Fused Systems
Fused Systems
Fus e d Sy s t e m s
AN/PSQ-36
AN/PSQ-20B
Fusion Goggle Enhanced (FGE)
Enhanced Night Vision Goggle (ENVG)
The FGE combines the light amplification capability of Image
Intensified (I2) devices, such as AN/PVS-15 night vision goggles,
with the heat-sensing capability of thermal imaging systems. The FGE
allows the operator to adjust the viewed image from 100% I2 to 100%
thermal, or a varying mix of the two. The system amplifies available light
and thermal signatures and fuses them to produce a clear image under
adverse conditions. The FGE provides unparalleled image resolution in
situations where active IR illumination is not an option.
The ENVG is a helmet-mounted dual-waveband monocular that uses the
latest in technology developments. The ENVG provides the operator with
significantly improved targeting and identification in all battlefield conditions
and light levels. The ENVG uses image intensification technology fused with
thermal imagery, thereby bridging the gap in performance and capability for
both of these sensors. The ENVG is based on L-3’s combat-proven Fusion
Goggle System (FGS) and is compatible with aiming lasers operating in the
near-infrared wavelengths.
®
BNVIS Mount
Features
• Compact, lightweight, ergonomic design
• Compatible with all standard issue near-IR aiming lasers
• Designed to work with weapon-mounted aiming and laser systems
• Target identification in light rain, smoke, snow, low light
and total darkness
• Can be used handheld or helmet-mounted
• Interoperable with ANVIS or BNVIS helmet mounts
• Battery pack provides extended operation
• Optional WPAN® wireless pod available
®
Features
• Fused thermal and I2 option
• Increased resolution
• Reduction in image latency
• Operates on 4 Lithium AA batteries
• Outline, White and Black Hot modes
• User adjustable I2 gain and
Outline
thermal brightness
• Optional WPAN® wireless
pod available
Battery Pack Allows Operator
to Use as a Handheld or
Helmet-Mounted System
Black Hot
White Hot
FGS-PI
Fusion Goggle System – Product Improvement
ANVIS Mount
The FGS-PI is a helmet-mounted dual-waveband goggle that is smaller
and lighter weight than its FGS predecessor. The FGS-PI provides
targeting and identification in all battlefield conditions and light levels.
This system uses image intensification technology fused with thermal
imagery, thereby bridging the gap in performance and capability for both
of these sensors. The FGS-PI is based on the combat-proven Insight
FGS and is compatible with aiming lasers.
Gen III Night Vision Image Intensifier (I2) Tubes
Are Available in Green and White Phosphor
Features
• Dual-waveband helmet-mounted goggle providing improved situational awareness, targeting and identification over standard night vision goggles
• Interpupillary tilt and fore/aft adjustments
• Fully qualified per MIL-STD-810E
• Available with ANVIS or BNVIS mounts for use with multiple helmet
and mount configurations
• Fully interchangeable mounting, power and data options
Fused View
Provides unparalleled image resolution
in situations where active IR illumination
Night Vision I 2 View
16
is not an option.
Dual-waveband helmetmounted goggle provides
improved situational
awareness and identification.
17
Precision Targeting Systems
Precision Targeting Systems
AN/PSQ-23A
®
Small Tactical Optical Rifle-Mounted Micro Laser Rangefinder –
Product Improved (STORM-PI)
The STORM-PI is a weapon-mounted, battery-operated laser rangefinder
with integrated IR illumination and aiming lasers (IR and variable) and a
Digital Magnetic Compass (DMC). It may be used to display target
location as geospatial coordinates (grid or slant). When weaponmounted, the visible aim laser enables the STORM-PI to be aligned with
existing optics, and the IR illuminator and IR aim laser facilitate target
acquisition and aiming in low-ambient light conditions.
Features
• Integrated IR aim laser, IR illuminator and visible laser
• Multi-platform capability with small arms, crew-served weapons,
light artillery and combat vehicles
• Optional WPAN® wireless remote available
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EXPOSURE TO BEAM. CLASS 3B LASER PRODUCT.
SRF
Squad Rangefinder
The SRF is the next generation of lightweight, miniaturized laser rangefinders that utilizes eye-safe transmission at 1,550 nm. Specifically
designed for squad-level operations and improved mission effectiveness,
the SRF replaces existing aiming lights and ranging devices at significant
savings in size, weight and power. MIL-STD-810-compliant.
Features
• Eye-safe laser RF with integrated aiming-illuminating lasers
• Fischer 7-pin connector (AN/PSQ-23 STORM accessorycompatible) rapid zeroing, integral visible boresight laser
• Bright white OLED display with full text menus
Optional Variable Divergence Illuminator
VISIBLE AND INVISIBLE LASER RADIATION. AVOID DIRECT EYE EXPOSURE. CLASS 3B LASER PRODUCT.
LA-16u/PEQ
Handheld Laser Marker (HLM)
The Handheld Laser Marker (HLM) is a small, lightweight device that
emits NATO Band I/II-compatible coded laser energy to quickly mark and
hand off targets for engagement with precision-guided munitions. HLM’s
coded laser energy is easily detected by spot-tracker-equipped aircraft
and reduces target handoff times
from many minutes to only seconds.
Mark and Hand Off Long-Range Targets for Engagement
SCARAB-GLTD
Ground Laser Target Designator Thermal Imager + See-Spot
Laser Designator / Rangefinder, Direct View Optics Assembly
The Scarab is a diode-pumped Nd: Yag laser target designator
that provides true terminal guidance capabilities. The low
SWAP, user-friendly design is single-man portable and enables
the ability to transition from carrying case to designator,
mission ready in < 3 minutes.
Features
Tripod-Mountable
• Single-man portable
• Mission-ready in less than 3 minutes
• Thermal imager with See-Spot
• Programmable reticle for simple field-level boresighting
• *STANAG 3733 NATO Band I/II-compliant
*Subject to export restrictions
Features
Quickly Mark and Hand Off
Targets for Engagement
18
• Pistol-shaped form factor with Mini
Red Dot Sight (MRDS) for intuitive
aiming and operation
• Simple user interface for quick entry
of PRF code
• Rechargeable battery
VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR
SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION.
CLASS 4 LASER PRODUCT.
INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED RADIATION.
CLASS 4 LASER PRODUCT.
19
OEM Rangefinders and Designators
DP-ELRF I MLRF
Diode-Pumped Eye-Safe Laser Rangefinder
The MLRF is L-3 ALST’s next generation of Diode-Pumped Eye-Safe Laser
Rangefinders (DP-ELRF), for users demanding exceptional performance in a
lightweight, compact package. The output energy, low-beam divergence and
sensitive APD receiver provide a powerful capability for multiple system solutions.
Features
• Diode-pumped erbium: glass
• Expected shot life of 10 million firings
• 1 Hz continuous fire capability
• Avalanche Photodiode Detector (APD)
DP-ELRF I MLRF
(20 km)
INVISIBLE LASER RADIATION. CLASS 1 LASER PRODUCT.
DP-ELRF I MLRF 2B
Diode-Pumped Eye-Safe Laser Rangefinder
The Miniature Laser Rangefinder (MLRF)-2B is the latest addition to the L-3
ALST Diode-Pumped Eye-Safe Laser Rangefinder product family. Weighing just
over 1 kg, firing with nominal 5 mJ output energy, and featuring optimized beam
divergence, an integrated visible boresight source, and sensitive APD receiver,
the MLRF-2B provides even the most demanding users with exceptional
performance.
DP-ELRF I MLRF
2B
Features
• Up to 25 km ranging capability, 39.9 km range gate
• 5 mJ nominal energy
• Total weight < 1020 gm
INVISIBLE LASER RADIATION. CLASS 1 LASER PRODUCT.
DP-ELRF II and DP-ELRF III
Diode-Pumped Eye-Safe Laser Rangefinders
The DP-ELRF II and III are Class 1 long-range eye-safe, laser rangefinders
with improvements that extend capabilities beyond L-3 ALST’s legacy flashlamp product line. Improvements to laser beam divergence, laser boresight
retention, system shot life and receiver sensitivity result in superior product
performance, even in the most demanding operational environments.
DP-ELRF II
(20 km)
DP-ELRF III
(30 km)
INVISIBLE LASER RADIATION. CLASS 1 LASER PRODUCT.
FL-ELRF-2 and ELRF-3
Flash Lamp Eye-Safe Laser Rangefinders
The FL-ELRF-2 and ELRF -3 are Class 1 long-range eye-safe, laser
rangefinders with an APD receiver suitable for a wide variety of
applications. With options such as lower beam divergence for smaller
targets or increased range resolution, the FL-ELRF-2 and ELRF -3 can be
configured for a specific application. The modularity of the units along with
L-3 ALST’s engineering customization capability allow the FL-ELRF-2 and
ELRF -3 to be fitted to specific customer requirements.
• Avalanche Photodiode Detector (APD)
• Modular configuration of components
• Kinematic-mounting interface for reliable boresight retention
• Single-connector interface for power and communication
• Single-connector interface for reliable boresighting retention
• Pulse repetition frequency up to 10 Hz
INVISIBLE LASER RADIATION. AVOID DIRECT EYE EXPOSURE.
CLASS 3R LASER PRODUCT.
INVISIBLE LASER RADIATION. CLASS 1 LASER PRODUCT.
Miniature Laser Designator
L-3 ALST’s MLD provides true terminal guidance capabilities for severely
SWAP-constrained applications, such as UAV gimbaled payloads, and
eliminates the need for time-consuming marker to designator handoffs.
Features
• STANAG 3733 Band I/II-compliant energy and PRF
• Total package weight < 2.0 lb.
• Diode-pumped ND: Yag
INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION.
CLASS 4 LASER PRODUCT.
MLD
(LIDAR- and STANAG 3733-Compliant)
Elite-LD
Elite-LD is L-3 ALST’s next-generation compact, low-profile laser designator
for users demanding high performance in a ruggedized package. Ideally
suited for man-portable or ground vehicle applications, Elite-LD is a highquality, fully compliant designator with 1.064 μm energy output in excess of
*80 mJ, in a small package typically seen for low-power, markeronly applications.
Features
ELRF-3
(30 km)
MLD
• Diode-pumped erbium: glass
• Expected shot life of 10 million firings
• 1 Hz continuous fire capability
• Avalanche Photodiode Detector (APD)
L-3 ALST’s DP-ELRF V employs the latest in rangefinding technology. Using a
diode-pumped erbium glass laser transmitter and a TE-cooled APD receiver,
L-3’s Osprey 5 provides high-pulse rate, low-input power requirements and
longer ranging pulses. The low-beam divergence and larger receiver aperture
provide for more accurate ranging on smaller targets.
FL-ELRF-2
(20 km)
Features
Laser Designator
Diode-Pumped Eye-Safe Laser Rangefinder
20
OEM Rangefinders and Designators
Features
DP-ELRF V
Osprey 5
(50 km)
Aiming and
Il l u m i n a ti o n S y ste m s
Elite-LD
(LIDAR- and STANAG 3733-Compliant)
Features
• Diode-pumped technology for longer life
• External sync pulse
• Picatinny rail mount for precision mounting
of optional hardware
*Subject to export restrictions
INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION.
CLASS 4 LASER PRODUCT.
Ph: 407-295-5878 | Fax: 407-770-2984
Email: [email protected]
21
Image Intensifier (I 2) Tubes
Unparalleled Low-Light Night Vision Performance
L-3 Warrior Systems – Electron Tube Operations (ETO) is a leading U.S. manufacturer of Gen III night vision tubes that have
equipped the military with superior MIL-SPEC and weapon shock-grade image intensifiers and electro-optical night vision
equipment for over 30 years and are 100% made in the U.S.A.
Current Gen III Image Intensifier (I2) tubes provide the best image resolution, sensitivity and signal-to-noise ratio (SNR)
currently deployed in fielded night vision devices. Continuous product improvements, such as thin-film ion barriers that greatly
extend Gen III tube life, and an auto-gated power supply, which protects the Night Vision (NV) tubes from sudden increases
in light levels, provide the soldier with added NV performance and the ability to function in mixed light-level conditions on the
battlefield and in urban environments.
Image Intensifier (I 2) Tubes
10130FG Series Image Intensifiers
(Similar to U.S. Military MX-10130D)
The 10130FG Series is L-3 Warrior Systems’ commercial version of the
MX10130D. This tube’s Gen III photocathode is very sensitive to low levels
of visible and near-IR light and has a non-inverting, straight-through optic.
A thin-film ion barrier greatly extends the Gen III I2 life versus Gen II tubes.
Features
• 1400, 1600 and 1800 Figure of Merit (FOM) exportable versions
• Non-inverting optic
• Military-grade blem spec
Used in the AN/PVS-7 (M963™)
Night Vision Goggle
Gen III White Phosphor Technology
L-3 Warrior Systems – ETO image intensifier (I2) tubes are available in standard green and
improved white phosphor technology for greater target detection and recognition. Lowlight and nighttime maneuvers appear more natural in black and white, with added
contrast detail in shapes and shadows providing the operator more visual information
for assessment and acquisition. White phosphor offer various shades of intensity
between black and white (over black and green), resulting in better contrast and depth
perception. This provides the ability to increase survivability and allows warfighters to
complete their mission accurately and effectively.
White Phosphor Image
Intensifiers Provide
Superior Contrast Detail
10160FG Series Image Intensifiers
(Similar to U.S. Military MX-10160)
The 10160FG Series incorporates a Gen III photocathode that is very
sensitive to low levels of visible and near-IR light. It has a thin-film ion
barrier to greatly extend Gen III I2 life versus Gen II tubes. Comes in
black noryl housing.
Features
• 1400, 1600 and 1800 FOM exportable versions
• Inverting optic
• Military-grade blem spec
Used in the AN/PVS-18 (M983™) and
AN/PVS-15 (M953™) Night Vision Systems
10160FG Aviator Series Image Intensifiers
MIL-SPEC White and Green Phosphor
Image Intensifiers for helmet- or weaponmounted night vision systems.
(Similar to U.S. Military MX-10160)
This aviator-grade tube with Gen III photocathode is very sensitive to low
levels of visible and near-IR light. It has a thin-film ion barrier to greatly
extend Gen III I2 life, an inverting optical element and electromagnetic
shielding. Comes in silver bullet housing.
Features
Superior Unfilmed and Auto-Gated Tubes
L-3 ETO’s unfilmed tubes are the highest-performing Image Intensifier (I2) tubes in the world. Period.
Reliability of these tubes is now more than twice the U.S. DoD requirement of 10,000 hours and they have been in production
for more than 10 years. This is the reason that our most discriminating USSOCOM customers choose unfilmed tubes to
maximize their confidence in completing their missions effectively.
See a distinct advantage in the clarity and image quality of ETO unfilmed tubes. Without the ion-barrier film, there are no film
defects to worry about in the image and there are smaller halos and higher signal-to-noise ratios, all resulting in unrivaled
performance. The resistance to weapon shock is also far superior to filmed tubes, making them a perfect solution for
weapon-mounted applications. Their low-light performance is unparalleled and their auto-gating capability is provided with
no sacrifice in audibility. ETO tubes are quiet, which is especially important in multi-tube goggle applications. No disturbing
ringing or humming to distract users from what they need to hear to complete their mission.
L-3 ETO’s Unfilmed Tube Advantage:
Quietly Impressive for Every Mission, Every Time.
22
• 1400, 1600 and 1800 FOM exportable versions
• Inverting optic
• Aviator-grade blem spec
Used in the AN/AVS-6/9 (M949™)
Night Vision Goggle
11769FG Series Image Intensifiers
(Similar to U.S. Military MX-11769)
The 11769FG Series is L-3 Warrior Systems’ commercial version of the
MX-11769. The tube’s Gen III photocathode is very sensitive to low levels
of visible and near-IR light. A thin-film ion barrier greatly extends the Gen
III I2 tube life. This tube also provides variable gain control. Comes in
black noryl housing.
Features
• 1400, 1600 and 1800 FOM exportable versions
• Inverting optic
• Military-grade blem spec
Used in the AN/PVS-14 (M914™) Night Vision
Monocular and AN/PVS-24/A (M2124™) IWNS-I2
23
Focal Plane Arrays
17 µm Focal Plane Arrays
Focal Plane Arrays
Outstanding Image Quality for Multiple Applications
320 x 256
FPA
Bond Pads
FPA on Carrier Plate
with Flex Wrap
FPA and
Flex Circuit
Our 320 x 256, 17µm uncooled Focal Plane Arrays (FPAs) are extremely
compact in size and based on state-of-the-art amorphous silicon
material that provides outstanding response and image quality over a
broad temperature range. We incorporate a flex for connection to the
camera electronics, affording great flexibility in the layout of the
circuit cards and the overall camera configuration. We have
incorporated our FPA into our NanoCore® 320 x 240 core, which is a
complete camera with all the features one would expect. The power
required for that core is ≤ 850 mW. This clearly demonstrates the ability
to efficiently integrate our FPA into a host of outstanding products.
Features
• Excellent performance in long-wave IR spectrum
• Supports broad operating and storage temperatures
• Supports high frame rates with no loss in performance
• Global shutter/snapshot mode capability
• Confirmed 30+ year vacuum life through accelerated testing
• Mid-wave configurations available
Shown For Actual Size Comparison
17 µm Focal Plane Arrays
640 x 480
FPA
Bond Pads
FPA on
Carrier Plate
Shown For Actual Size Comparison
24
FPA and
Flex Circuit
The 640 x 480, 17 µm uncooled Focal Plane Arrays (FPAs) are based on
state-of-the-art amorphous silicon material that provides outstanding
response and image quality over a broad temperature range. We have
integrated our FPA into our NanoCore® 640 x 480 core, which is a
complete camera and runs on ≤ 1.1 mW demonstrating that this FPA can
efficiently integrate into a wide range of products.
Features
• Excellent performance in long-wave IR spectrum
• Supports broad operating and storage temperatures
• Supports high frame rates with no loss in performance
• Global shutter/snapshot mode capability
• Confirmed 30+ year vacuum life through accelerated testing
• Mid-wave configurations available
L-3 Infrared Products (IRP) is a leading designer and manufacturer of commercial
FPAs that are high-quality, affordable and used in thermal technology products
by ground forces and urban tactical teams in support of public safety, homeland
security, military and commercial applications.
All objects, both natural and man-made, emit infrared energy as heat. By detecting
very subtle temperature differences of everything in view, infrared thermal imaging
technology reveals what otherwise would be invisible to the naked eye. Even in
complete darkness and challenging weather conditions, thermal imaging gives the
operator the ability to see the unseen.
L-3 IRP FPAs deliver high-performance infrared technology solutions for a wide
variety of thermal imaging applications – all with exceptional value. The uncooled
amorphous silicon technology provides impressive image quality using low power
in small and flexible form factors. L-3 IRP’s
wafer-level vacuum-packaged FPA
is also an extremely compact and lightweight design. L-3 IRP incorporates a flex
for connection to the camera electronics,
which affords greater flexibility in the layout
of the circuit cards and the overall
thermal camera configuration.
Serving the U.S. Military, Law
Enforcement, Security Professionals
and Fire and Rescue Teams
• Reconnaissance and Tactical
• Security and Surveillance
• Protecting the Waterfront
• Securing Borders and Perimeters
• Intelligence Gathering
• OEM for Unmanned Air, Ground
and Underwater Systems
• Commercial Consumer Markets
Daylight View of Crime Scene
Daylight View of Crime Scene
With Thermal Imaging
The only uncooled IR FPA with global
Heat signature is detected in daylight, smoke,
shutter/snapshot mode capability and
no-light and extreme weather conditions
superior resolution.
for surveillance and target detection.
25
Holographic Weapon Sights
EOTech
Mobile-Vision
EXPS3
Available in Black and Tan
FlashbackHD™
Holographic Weapon Sight
Digital In-Car Video Solution
The Holographic Weapon Sight maximizes the operator’s peripheral vision, which
allows for faster target acquisition and gives the operator greater control in the
engagement zone.
Designed for law enforcement, the FlashbackHD is the ultimate in video capture,
upload and retrieval. With multiple automatic recording triggers and a capacity
of up to 120 GB of onboard video storage, this L-3 Mobile-Vision video system
requires minimal intervention from officers as they go about their daily duties of
protecting and serving our communities.
Features
• Gen I through III night vision-compatible
• Adjustable for visibility in the brightest sunlight
• Compatible with 1-inch Weaver or MIL-STD-1913 rail-mounts
Mobile Video Solutions for the
Public Safety Sector
Features
• Up to 5 camera inputs and 3 audio channels
• Built-in GPS
• Wireless microphones using DECT technology
BodyVISION
Body-Worn Camera
EXPS3 Has a Choice of 3 Reticles.
The 4-Dot Reticle Is Available in Black Only.
G33.STS
Available in Black and Tan
3x Magnifier
The G33 magnifier is shorter and lighter than previous models. The mount
provides faster transitioning from 3x to 1x, tool-free vertical and horizontal
adjustments, larger field-of-view and an adjustable diopter for improved,
precise focusing.
Features
• Tool-free vertical and horizontal adjustments
• Adjustable diopter
• Compatible with 1-inch Weaver or MIL-STD-1913 rail-mounts
BodyVISION is an HD Body-Worn camera and audio recording system that can
be used as a stand-alone device or combined with a digital evidence management
system. BodyVISION provides an unbiased eye to protect officers and citizens and
delivers the technology, quality and reliability needed to seamlessly perform duties
at the highest level.
Features
• 5 hours of video storage in HD
• Ability to download multiple devices simultaneously
• Trace point snapshots and tamper-resistant controls
AlertVU™
License Plate Recognition Systems
L-3’s AlertVU Automatic License Plate Recognition systems for fixed, portable and
mobile applications help capture license plates of vehicles associated with a crime
to help keep our communities safe.
Features
• Fully functional back-office solution
• Capture plates at highway speeds and at sharp angles – even in the
outermost lane
V-One™
All-in-One Mobile Data Computer
Works With EXPS3
L-3 Mobile-Vision’s V-One All-in-One Mobile Data Computer (MDC) is
designed with first responders in mind. Its compact and robust features make it
ideal for law enforcement, fire departments, EMS and the military.
Features
• 180 GB solid-state drive is standard; 300 GB upgrade available
• Intel i7™ quad-core processor and 8 GB RAM are standard
• GPS, Bluetooth®, Wi-Fi and 7 USB ports are included
The G33 Mount Provides Faster
Transitioning from 3x to 1x
26
Capture, manage and communicate
critical information for increased
situational awareness and officer safety.
MIL-STD 810G Tested
Toll Free: 800-336-8475
www.L-3com.com/MV
or www.mobile-vision.com
27
Publ i c Sa f e t y & Spor t i ng
Large-Caliber
M obi l e Vi de o Sol ut i ons
fo r th e
Insight Technology
Systems
Publ i c Sa f e t y SeRail-Mount
c t or
Logistics and Service
L-3 Warrior Systems provides superior
technology, and we stand behind every
product we deliver.
M2
Tri-Rail Mounting Bracket
The Tri-Rail Mounting Bracket attaches to the feed tray cover of the M2
Machine Gun to provide a mounting platform for laser aiming devices,
weapon-mounted optics and laser rangefinders. It uses simple throw-lever
technology to rapidly equip the M2 with three MIL-STD-1913 rails.
Features
• Facilitates the attachment of three rail-mounting platforms to the M2
• Simple throw-lever configuration allows for simple mounting and dismounting
• Iron sight co-witness
M249
Articulating Rail System (ARS)
Logistics and Service Ensure the Warfighter Has
the Right Systems – Where and When Needed
The M249 ARS is a clip-on and pivoting rail system that’s rugged enough
to handle the punishing recoil of large-caliber weapons and provides
additional rail space to accommodate clip-on night vision and laser aiming
devices without impacting operation of the weapon. The M249 ARS
attaches quickly without tools or making any alterations to the weapon.
ARS Shown Closed
L-3 Warrior Systems’ Logistics Department comprises a
dedicated team of professionals working seamlessly in all stages
of product development, while overseeing plans for the successful
deployment of systems around the globe.
Features
ARS Shown Open
• A one-piece articulating rail that requires no modification to the weapon
• Increased rail space for multiple clip-on optics and laser aiming systems for day
and night missions
• Pivoting rail system allows one-handed operation for reloading ammunition
on the M249
• Does not impact the boresight accuracy of the current rail system
M240
Articulating Rail System (ARS)
Feed Tray
Actuator
Articulated
Rail
The M240 ARS is a clip-on and pivoting rail system that comprises two
assemblies and provides rail space to accommodate clip-on night vision
devices without impacting operation of the weapon. The ARS provides
fast, single-handed operation of the feed tray cover, and the hinged rail
allows quick access to load ammunition or clear malfunctions from the
M240 receiver.
Features
• Simple installation requires no modification to the weapon
• One-handed operation for opening the feed tray cover
• Increased rail space to accommodate clip-on night vision and laser aiming devices
• Does not impact the boresight accuracy of the current rail system
• Meets MIL-STD-810G requirements
Experienced military personnel provide hands-on training to ensure
the warrior is fully informed of the system’s usage, features and
proper maintenance functions.
Support Team
Logistics Team
• Product Managers
• Engineering
• Supply Chain
• Configuration Management
• Production
• Warehouse Management
• Import/Export Control
•Logistics Analysts
•Field Repair Technicians
•Technical Writers
•Military Trainers
• Field Service Reps
Field returns are repaired in the Logistics Repair Center using
standard repair procedures. Systems are inspected and repaired to
OEM specifications and are returned in ready-for-issue condition. Full
depot-level repair is a cost-effective means of reducing turnaround
time, putting systems back into the warfighter’s hands quickly.
The ultimate goal of the Logistics Department is to administer a
coordinated effort and strategic alliance with the customer, while
always striving to accommodate and equip the warfighter in
an efficient and effective manner.
Product Information
Components and systems are available in various power levels and colors. Contact a representative for more information on our complete
line of Warrior Systems products. Specifications and data contained within this document are summary in nature and subject to change at
any time without notice at L-3 Warrior Systems’ discretion. Call for latest specifications. All brand names and product names referenced are
trademarks, registered trademarks, or trade names of their respective holders.
Export Notice
Export of the commodities described herein is strictly prohibited without a valid export license, exemption, or exception from the U.S.
Department of State, Office Defense Trade Controls, prescribed in the International Traffic in Arms Regulations (ITAR), Title 22, Code of
Federal Regulations, Parts 120-130 or the Export Administration Regulations (EAR), 15 C.F.R. Parts 730-744. Prior to the export or transfer
of product to a non-U.S. person, contact L-3 Warrior Systems for details.
The graphic content within this catalog consists of L-3 Communications Corporation general product information and images that do not
contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations
(EAR) Part 734.7-11.
28
Use of U.S. Department of Defense (DoD) visual information does not imply or constitute DoD endorsement.
29
9 Akira Way
Londonderry, NH 03053 - USA
603-626-4800 or Toll-Free: 866-509-2040
Mobile-Vision
Insight Technology
9 Akira Way
Londonderry, NH 03053
866-509-2040
EOTech Operations
1201 E. Ellsworth Road
Ann Arbor, MI 48108
888-EOTHOLO or 888-368-4656
Mobile-Vision, Inc.
400 Commons Way, Suite F
Rockaway, NJ 07866
800-336-8475
ETO
ALST
IRP
Electron Tube Operations
1215 S. 52nd Street
Tempe, AZ 85281
480-968-4471
Advanced Laser Systems Technology
2500 North Orange Blossom Trail
Orlando, FL 32804
407-295-5878
Infrared Products
3414 Herrmann Drive
Garland, TX 75041
972-840-5600
2016_WS_Catalog_r1d-3k
www.L-3com.com/WarriorSystems
© Copyright 2016 L-3