DIPOL - SMATV / shared antenna systems
Transcription
DIPOL - SMATV / shared antenna systems
Other Terra solutions Terra also provides equipment for processing DVB-T multiplexes, as well as for creating and distributing “private” audio-video streams encoded in DVB-T standard (e.g. from security cameras). The examples are DVB-T regenerator (COFDM -COFDM transmodulator) R81714 used in low-signal areas, DVB-T encoder R81713, and DVB-T modulator R 8 1 7 0 9 . DV B -T b r o a d c a s t s c a n a l s o b e demodulated and converted into analog PAL channels (DVB-T/PAL transmodulator R81714). DVB-T (MPEG-2/H.264) dm 316 dm 316 dm 316 rt 316 dm 316 Mux2 dm 316 dm 316 rt 316 Mux1 rd313 rd313 rd313 trx360 rd313 rd313 rd313 8x PAL SMATV / shared antenna systems DVB-T Conversion of satellite channels into DVB-T multiplex(es) – DVB-T modulator TRX-360 A/V signal 1 R81713 R81709 R81713 A/V signal 4 A/V signal 1 trx 360 DVB-T modulator md 330 3-channel MPEG2 MPEG-2 TS (transport stream) MPEG-2 TS (transport stream) a short guide A/V signal 5 A/V signal 6 Terra ttx311 COFDM-COFDM transmodulator COFDM DVB-T Signal Encoding and distributing video from security cameras as DVB-T multiplex – md-330 R81713 encoder and TRX-360 R81709 modulator Regeneration of low-quality DVB-T multiplex Do you re gularly re ad our w 8 langua eekly ne ges? It is wsletter available publishe at www.dipoln DVB-T Signal d online in et.com www.dipol.com.pl www.dipolnet.at www.dipolnet.de DVB T www.dipolnet.com A/V signal 1 md 330 3-channel MPEG2 OFDM receiver / DSB modulator RT-316 receives a whole DVB-T multiplex, of which one program can be selected for conversion to analog PAL channel. Such conversion is especially useful in hotels, hospitals, sanatoriums etc. with multiple analog televisions in use. (transmodulator DVB-T/PAL R81707) General recommendations System components Coaxial cables Newly designed SMATV systems should absolutely use reputable brand cables, at least with “Class A” designation. It is very important due to the fact that the spectrum of the distributed signals is very wide (47-2400 MHz). Cheap cables are not suitable for multiswitch systems because of high attenuation and poor shielding. The consequence would be be crosstalk between cables. Existing buldings In the transitional period, the owner/manager of the building should adapt the existing shared antenna system so that the residents will be able to receive digital terrestrial broadcasts after analog switch-off. 75 ohm coaxial cable Triset Profi 120 dB A++ 75 ohm coaxial cable Triset 113 (A+) 75 ohm coaxial cable Triset 113 PE (A+) 75 ohm coaxial cable Triset 113 HF (A+) has been specially p r e p a r e d f o r applications in large multiswitch systems and cable TV networks. is dedicated for SMATV systems and individual sat TV installations (indoor applications). is dedicated for SMATV systems and individual sat TV installations (outdoor applications). is dedicated for SMATV systems in public buildings (indoor applications; low smoke emission without corrosive fumes and halogen). 75 ohm coaxial cable Triset-11 PE (gel-filled, A+) prepared for outdoor applications (PE sheath resistant to UV radiation, long-lasting p r o t e c t i o n a ga i n s t water penetration). New buildings Connectors All new apartment buildings should be equipped with shared antenna systems that provide the following benefits: ? all residents have access to television and radio signals with optimal parameters, ? the buildings are protected from the destructive effects of many individual installations, ? the receiving devices of the residents are protected from harmful effects of lightning strikes. The cost of connectors is very low compared to other components of SMATV systems, but they significantly influence labor consumption during installation and startup procedures, as well as long-term relability of the distribution networks. PCT and Platinum compression connectors ensure the highest standards of performance. Due to the high popularity of digital satellite TV platforms, an effective method of modernization of shared antenna systems is application of SMATV distribution networks based on multiswitches. 2 Compression F connector PCT-TRS-9NT E80340 for Triset113 cables: Compression F connector Platinum for Triset-113 cables E80274. ? TRISET-113 E1015, ? TRISET-113HF E1019, ? TRISET-113PE E1017, ? TRISET-PROFI E1010. The instructional video is available at: www.youtube.com/ dipolnet Protectors Outlets High quality Signal Signal R-TV-SAT outlet for multiswitch systems R694100 . U n i v e r s a l compression tool PCTA I O - C T ( f o r compressing BNC, F, IEC, RCA connectors) E80075. High quality Signal outlet Signal TV/ FM/ SAT1/ SAT2 outlet R694140 Signal TV-Sat surge protector - R48602. for multiswitch systems supplying signals to twin-tuner PVR receivers. Signal galvanic isolator - R48605. 7 System components V S B modulators Multiband amplifiers ma420 R82520 is a modern amplifier of FM, VHF, and UHF signals, with individual settings for each band. Its high gain (30 dB) and maximum output level of 118 dBµV allow for building very large systems. (mono and versions) Code: R82520 stereo Mt420 R82515 modulator is a top class device designed for insertion of additional RF Code: channels that carry signals R82515 from CCTV cameras , DV D / m e d i a p l a ye r s , satellite/DVB-T receivers, etc. The device has two independent signal paths, so it is possible to introduce signals from two video/audio sources on RF channels within the same or in different TV bands. SMATV systems in apartment buildings A multiswitch system with bus architecture has the main path from which the signals are provided to individual multiswitches through taps. This arrangement reduces the risk of a cascading failure of the system. A set of channel amplifiers combined with multiswitch system based on bus topology is the most modern and flexible solution for distributing high-quality television signals. Large multiswitch systems with bus architecture can distribute signals to over 1000 outlets, and most importantly, at any time they may be easily upgraded, e.g. in order to connect twin-tuner PVR receivers. Terrestrial signals (DVB-T & analog), amplified by channel amplifiers, are combined with satellite signals and distributed via the multiswitch system. Set of Alcad channel amplifiers Multiswitch system for two satellite positions TV antenna Channel amplifiers Alcad ZG-421 SAT dish Channel amplifier Tap Multiswitch Outlet provide an excellent alternative to those of Terra. Their increased selectivity is sufficient even for networks with active adjacent channels. They offer very high gain (adjustable within 33-53 dB range) and extremely high maximum output level (120 dBµV, two outputs). Multiswitches Multiswitches of MSV series employ bus architecture that has been implemented in 5Code: R707..., R708... input (for one satellite position and terrestrial TV) and 9-input (for two satellite positions and terrestrial TV) versions. There are units with different number of outputs, from 4 to 32. They have active paths (MSV series) or passive paths (MS series). The power supply is fed through signal lines. Independent IF gain control in low and high bands allows for signal level equalization, which minimizes the influence of crosstalk on signal quality. The systems based on the multiswitches can distribute signals to 1000 or so outlets. In many cases, the systems based on bust topology can also use radial multiswitches from MSR series that are equipped with builtin power supplies. Amplifiers for Terra for multiswitches Code: The amplifier s are R70511, R70911 d e s i g n e d f o r amplification of the first sat IF and terrestrial TV bands. There are 5-input (R70511) and 9-input (R70911) versions. The terrestrial paths are made in push-pull configuration. The amplifiers also provide supplying voltage to LNBs. The maximum gain of satellite/terrestrial paths is 22 dB / 17 dB, the maximum output levels 106 dBµV / 114dB µV correspondingly. Both versions ensure cable loss compensation. The power supply is fed through signal lines. Terra SAT/TV splitters The splitters split the bus to form subnetworks, which is typical solution for large systems. Code: R70515, R70520, R70523, R70529 6 SET OF AMPLIFIERS Multiswitch systems based on bus topology A simple system with one MSV multiswitch in each staircase. Maximum number of outlets in each staircase – 32. The splitters are equipped with DC-transition switches that in "ON" position run current through "H" paths to both branches. In "OFF" position it is possible only within one path. There are versions with 5 and 9 inputs and different number of outputs (R70515, R70520, R70523, R70529). Stairway1 Stairway 2 Stairway 3 Stairway 4 Stairway 5 A multiswitch system with bus architecture for two satellite positions. An extensive system with taps on each stor y. Easy to upgrade e.g. for doubletuner PVRs. SET OF AMPLIFIERS Code: R905039 Stairway 1 Stairway 2 Stairway 3 Stairway 4 Stairway 5 www.dipolnet.com System components Designing of SMATV systems Implementation of each SMATV system should be based on a design taking into account information such as levels of input signals, signal levels at the outputs of active components, attenuation of cables and passive components: ? splitters ? taps ? outlets. LNB C LNB D 5m-5 5m-5 SA901 Set of Terra RF amplifiers Slope UHF Gain -11 -14 -11 -14 -2 -11 -13 -13 -13 UHF BIII/DAB FM SS904 AB010 -4 dB AB004 DC 10m-1 10m-1 10m-1 -11 -8 0 -12 -5 Sat A Gain Terr TV Sat B Gain Gain MSV908 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 AT420 AT420 AT420 MA400 Installation options Terra amplifiers installation options - -19 -19 -13 -19 -19 Sat A Gain Terr TV Sat B Gain Gain MSV916 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 DC+12V RF OUT 10m-1 10m-1 10m-1 10m-1 10m-1 -20 -20 -14 -20 -20 Sat A Gain Terr TV Sat B Gain Gain MSV916 DC 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 -10 dB Directly on the wall So far, the designing of large satellite systems has been difficult and laborious, but new software simplifies the process to a few mouse clicks. The free SatNet software helps design any S M AT V n e t wo r k b a s e d o n Te r ra multiswitches. The program can be downloaded from: On a frame, parallel to the wall On DIN rail, with On DIN rail, On a frame, separate power supply with central power supply perpendicularly to the wall Channel amplifiers Highly selective tunable amplifier at420 R82510 has two independent paths. Each of them can amplify different DVB-T multiplex or analog TV channel, so the twin amplifier saves space, replacing two separate units. www.dipolnet.com/satnet 4 VHFIII amplifier 5m-5 SS910 10m-1 10m-1 10m-1 10m-1 10m-1 Terra multiswitch 10m-1 10m-1 -16 -16 -4 -15 -15 Sat A Gain Terr TV Sat B Gain Gain MSV916 -10 dB 10m-1 10m-1 SS910 10m-1 5m-5 10m-1 5m-5 10m-1 10m-1 Terra SAT/TV splitter -15 dB 10m-1 10m-1 5m-5 10m-1 10m-1 Terra amplifier for multiswitches SS915 UHF amplifier -14 -14 -3 -15 -13 Sat A Gain Terr TV Sat B Gain Gain MSV916 -15 dB 10m-5 10m-1 SS915 -13 -12 0 -13 -10 Sat A Gain Terr TV Sat B Gain Gain MSV908 10m-1 10m-5 10m-1 10m-1 3m-5 10m-1 10m-1 3m-5 Te r ra R F e q u i p m e n t ensures the best way to process all kind of signals (including DVB -T and baseband video from cameras and media players) for distribution in SMATV systems. The stateof-the-art solution includes: ? channel amplifiers ? multiband amplifiers ? modulators The paths are equipped with automatic gain control (AGC) and ultra selective SAW (Surface Acoustic Wave) filters. The high modulation error rate (MER), not lower than 36 dB, provides an excellent reception of digital terrestrial TV broadcasts even in very extensive systems. 15-minute step-by-step tutorial on the designing process is available at http://www.youtube.com/dipolnet Code: R82510 5 System components Designing of SMATV systems Implementation of each SMATV system should be based on a design taking into account information such as levels of input signals, signal levels at the outputs of active components, attenuation of cables and passive components: ? splitters ? taps ? outlets. LNB C LNB D 5m-5 5m-5 SA901 Set of Terra RF amplifiers Slope UHF Gain -11 -14 -11 -14 -2 -11 -13 -13 -13 UHF BIII/DAB FM SS904 AB010 -4 dB AB004 DC 10m-1 10m-1 10m-1 -11 -8 0 -12 -5 Sat A Gain Terr TV Sat B Gain Gain MSV908 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 AT420 AT420 AT420 MA400 Installation options Terra amplifiers installation options - -19 -19 -13 -19 -19 Sat A Gain Terr TV Sat B Gain Gain MSV916 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 DC+12V RF OUT 10m-1 10m-1 10m-1 10m-1 10m-1 -20 -20 -14 -20 -20 Sat A Gain Terr TV Sat B Gain Gain MSV916 DC 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 10m-1 -10 dB Directly on the wall So far, the designing of large satellite systems has been difficult and laborious, but new software simplifies the process to a few mouse clicks. The free SatNet software helps design any S M AT V n e t wo r k b a s e d o n Te r ra multiswitches. The program can be downloaded from: On a frame, parallel to the wall On DIN rail, with On DIN rail, On a frame, separate power supply with central power supply perpendicularly to the wall Channel amplifiers Highly selective tunable amplifier at420 R82510 has two independent paths. Each of them can amplify different DVB-T multiplex or analog TV channel, so the twin amplifier saves space, replacing two separate units. www.dipolnet.com/satnet 4 VHFIII amplifier 5m-5 SS910 10m-1 10m-1 10m-1 10m-1 10m-1 Terra multiswitch 10m-1 10m-1 -16 -16 -4 -15 -15 Sat A Gain Terr TV Sat B Gain Gain MSV916 -10 dB 10m-1 10m-1 SS910 10m-1 5m-5 10m-1 5m-5 10m-1 10m-1 Terra SAT/TV splitter -15 dB 10m-1 10m-1 5m-5 10m-1 10m-1 Terra amplifier for multiswitches SS915 UHF amplifier -14 -14 -3 -15 -13 Sat A Gain Terr TV Sat B Gain Gain MSV916 -15 dB 10m-5 10m-1 SS915 -13 -12 0 -13 -10 Sat A Gain Terr TV Sat B Gain Gain MSV908 10m-1 10m-5 10m-1 10m-1 3m-5 10m-1 10m-1 3m-5 Te r ra R F e q u i p m e n t ensures the best way to process all kind of signals (including DVB -T and baseband video from cameras and media players) for distribution in SMATV systems. The stateof-the-art solution includes: ? channel amplifiers ? multiband amplifiers ? modulators The paths are equipped with automatic gain control (AGC) and ultra selective SAW (Surface Acoustic Wave) filters. The high modulation error rate (MER), not lower than 36 dB, provides an excellent reception of digital terrestrial TV broadcasts even in very extensive systems. 15-minute step-by-step tutorial on the designing process is available at http://www.youtube.com/dipolnet Code: R82510 5 System components V S B modulators Multiband amplifiers ma420 R82520 is a modern amplifier of FM, VHF, and UHF signals, with individual settings for each band. Its high gain (30 dB) and maximum output level of 118 dBµV allow for building very large systems. (mono and versions) Code: R82520 stereo Mt420 R82515 modulator is a top class device designed for insertion of additional RF Code: channels that carry signals R82515 from CCTV cameras , DV D / m e d i a p l a ye r s , satellite/DVB-T receivers, etc. The device has two independent signal paths, so it is possible to introduce signals from two video/audio sources on RF channels within the same or in different TV bands. SMATV systems in apartment buildings A multiswitch system with bus architecture has the main path from which the signals are provided to individual multiswitches through taps. This arrangement reduces the risk of a cascading failure of the system. A set of channel amplifiers combined with multiswitch system based on bus topology is the most modern and flexible solution for distributing high-quality television signals. Large multiswitch systems with bus architecture can distribute signals to over 1000 outlets, and most importantly, at any time they may be easily upgraded, e.g. in order to connect twin-tuner PVR receivers. Terrestrial signals (DVB-T & analog), amplified by channel amplifiers, are combined with satellite signals and distributed via the multiswitch system. Set of Alcad channel amplifiers Multiswitch system for two satellite positions TV antenna Channel amplifiers Alcad ZG-421 SAT dish Channel amplifier Tap Multiswitch Outlet provide an excellent alternative to those of Terra. Their increased selectivity is sufficient even for networks with active adjacent channels. They offer very high gain (adjustable within 33-53 dB range) and extremely high maximum output level (120 dBµV, two outputs). Multiswitches Multiswitches of MSV series employ bus architecture that has been implemented in 5Code: R707..., R708... input (for one satellite position and terrestrial TV) and 9-input (for two satellite positions and terrestrial TV) versions. There are units with different number of outputs, from 4 to 32. They have active paths (MSV series) or passive paths (MS series). The power supply is fed through signal lines. Independent IF gain control in low and high bands allows for signal level equalization, which minimizes the influence of crosstalk on signal quality. The systems based on the multiswitches can distribute signals to 1000 or so outlets. In many cases, the systems based on bust topology can also use radial multiswitches from MSR series that are equipped with builtin power supplies. Amplifiers for Terra for multiswitches Code: The amplifier s are R70511, R70911 d e s i g n e d f o r amplification of the first sat IF and terrestrial TV bands. There are 5-input (R70511) and 9-input (R70911) versions. The terrestrial paths are made in push-pull configuration. The amplifiers also provide supplying voltage to LNBs. The maximum gain of satellite/terrestrial paths is 22 dB / 17 dB, the maximum output levels 106 dBµV / 114dB µV correspondingly. Both versions ensure cable loss compensation. The power supply is fed through signal lines. Terra SAT/TV splitters The splitters split the bus to form subnetworks, which is typical solution for large systems. Code: R70515, R70520, R70523, R70529 6 SET OF AMPLIFIERS Multiswitch systems based on bus topology A simple system with one MSV multiswitch in each staircase. Maximum number of outlets in each staircase – 32. The splitters are equipped with DC-transition switches that in "ON" position run current through "H" paths to both branches. In "OFF" position it is possible only within one path. There are versions with 5 and 9 inputs and different number of outputs (R70515, R70520, R70523, R70529). Stairway1 Stairway 2 Stairway 3 Stairway 4 Stairway 5 A multiswitch system with bus architecture for two satellite positions. An extensive system with taps on each stor y. Easy to upgrade e.g. for doubletuner PVRs. SET OF AMPLIFIERS Code: R905039 Stairway 1 Stairway 2 Stairway 3 Stairway 4 Stairway 5 www.dipolnet.com General recommendations System components Coaxial cables Newly designed SMATV systems should absolutely use reputable brand cables, at least with “Class A” designation. It is very important due to the fact that the spectrum of the distributed signals is very wide (47-2400 MHz). Cheap cables are not suitable for multiswitch systems because of high attenuation and poor shielding. The consequence would be be crosstalk between cables. Existing buldings In the transitional period, the owner/manager of the building should adapt the existing shared antenna system so that the residents will be able to receive digital terrestrial broadcasts after analog switch-off. 75 ohm coaxial cable Triset Profi 120 dB A++ 75 ohm coaxial cable Triset 113 (A+) 75 ohm coaxial cable Triset 113 PE (A+) 75 ohm coaxial cable Triset 113 HF (A+) has been specially p r e p a r e d f o r applications in large multiswitch systems and cable TV networks. is dedicated for SMATV systems and individual sat TV installations (indoor applications). is dedicated for SMATV systems and individual sat TV installations (outdoor applications). is dedicated for SMATV systems in public buildings (indoor applications; low smoke emission without corrosive fumes and halogen). 75 ohm coaxial cable Triset-11 PE (gel-filled, A+) prepared for outdoor applications (PE sheath resistant to UV radiation, long-lasting p r o t e c t i o n a ga i n s t water penetration). New buildings Connectors All new apartment buildings should be equipped with shared antenna systems that provide the following benefits: ? all residents have access to television and radio signals with optimal parameters, ? the buildings are protected from the destructive effects of many individual installations, ? the receiving devices of the residents are protected from harmful effects of lightning strikes. The cost of connectors is very low compared to other components of SMATV systems, but they significantly influence labor consumption during installation and startup procedures, as well as long-term relability of the distribution networks. PCT and Platinum compression connectors ensure the highest standards of performance. Due to the high popularity of digital satellite TV platforms, an effective method of modernization of shared antenna systems is application of SMATV distribution networks based on multiswitches. 2 Compression F connector PCT-TRS-9NT E80340 for Triset113 cables: Compression F connector Platinum for Triset-113 cables E80274. ? TRISET-113 E1015, ? TRISET-113HF E1019, ? TRISET-113PE E1017, ? TRISET-PROFI E1010. The instructional video is available at: www.youtube.com/ dipolnet Protectors Outlets High quality Signal Signal R-TV-SAT outlet for multiswitch systems R694100 . U n i v e r s a l compression tool PCTA I O - C T ( f o r compressing BNC, F, IEC, RCA connectors) E80075. High quality Signal outlet Signal TV/ FM/ SAT1/ SAT2 outlet R694140 Signal TV-Sat surge protector - R48602. for multiswitch systems supplying signals to twin-tuner PVR receivers. Signal galvanic isolator - R48605. 7 Other Terra solutions Terra also provides equipment for processing DVB-T multiplexes, as well as for creating and distributing “private” audio-video streams encoded in DVB-T standard (e.g. from security cameras). The examples are DVB-T regenerator (COFDM -COFDM transmodulator) R81714 used in low-signal areas, DVB-T encoder R81713, and DVB-T modulator R 8 1 7 0 9 . DV B -T b r o a d c a s t s c a n a l s o b e demodulated and converted into analog PAL channels (DVB-T/PAL transmodulator R81714). DVB-T (MPEG-2/H.264) dm 316 dm 316 dm 316 rt 316 dm 316 Mux2 dm 316 dm 316 rt 316 Mux1 rd313 rd313 rd313 trx360 rd313 rd313 rd313 8x PAL SMATV / shared antenna systems DVB-T Conversion of satellite channels into DVB-T multiplex(es) – DVB-T modulator TRX-360 A/V signal 1 R81713 R81709 R81713 A/V signal 4 A/V signal 1 trx 360 DVB-T modulator md 330 3-channel MPEG2 MPEG-2 TS (transport stream) MPEG-2 TS (transport stream) a short guide A/V signal 5 A/V signal 6 Terra ttx311 COFDM-COFDM transmodulator COFDM DVB-T Signal Encoding and distributing video from security cameras as DVB-T multiplex – md-330 R81713 encoder and TRX-360 R81709 modulator Regeneration of low-quality DVB-T multiplex Do you re gularly re ad our w 8 langua eekly ne ges? It is wsletter available publishe at www.dipoln DVB-T Signal d online in et.com www.dipol.com.pl www.dipolnet.at www.dipolnet.de DVB T www.dipolnet.com A/V signal 1 md 330 3-channel MPEG2 OFDM receiver / DSB modulator RT-316 receives a whole DVB-T multiplex, of which one program can be selected for conversion to analog PAL channel. Such conversion is especially useful in hotels, hospitals, sanatoriums etc. with multiple analog televisions in use. (transmodulator DVB-T/PAL R81707)