Chipper, PTO - Model 6210 10” Capacity Only 35HP Required

Chipper, PTO - Model 6210
MADE IN
10” Capacity
THE U.S.A
The Model 6210 is a 10” capacity gravity feed chipper
with a large 10” x 14” infeed opening. Clear debris curtain strips, help protect the user from fly back of material. This unit utilizes 1/2”
thick x 5-1/2” long, double
edge chip blades and a 1/2”
thick, reversible, sharpenable,
and replaceable bed knife, for
consistent chip size and chipping capabilities of even those
small viney, stringy, messy
jobs! 360° exhaust chute, and
east adjust exhaust flap. No
tools required to adjust either
one.
Only 35HP Required @ the PTO!
(9) 1/2” thick, doublesided, chip blades, segmented into 3-knife
pockets. Easy access
to blades through 1/2”
thick steel impeller
housing. 1” thick x
42” diameter impeller, with 3-welded and
gusseted paddles for
better chip discharge
and air-flow, 410 LBS.
4-Bolt, cast iron, self aligning,
greaseable bearings! Replaceable,
sharpenable, adjustable steel bed
knife!
Quality of Workmanship, Innovative
Design, Built to Last!
Extra large 10” x 14” infeed
opening means less pruning
and trimming! Debris curtains help protect operator
from fly back of material.
SPECIFICATIONS & FEATURES, MODEL 6210PTO CHIPPER
FRAME:
INFEED OPENING:
INFEED CHUTE:
IMPELLER HOUSING:
IMPELLER:
CHIPPER BLADES:
BED KNIFE:
EXHAUST CHUTE:
EXHAUST FLAP:
PTO SHAFT & COVER:
BEARINGS:
GUARDS/DECALS:
PAINT:
DIMENSIONS:
Heavy duty 7 gauge steel frame, fully gusseted for strength.
10” x 14” infeed opening.
7 gauge steel infeed chute. Continuous welds for extra strength.
1/4” thick steel, impeller housing is vented to provide more air flow for
chip exhaust.
1” thick X 42” diameter impeller, with 3-welded and gusseted paddles,
fully balanced. 410 LBS.
Easy Access to 1/2” thick x 5-1/8” long x 4” wide, double sided chip
blades. (Qty. 9)
1/2” thick reversible, adjustable, sharpenable & replaceable bed knife.
360-Degree Swivel, steel exhaust chute, continuous welds for extra
strength. No tools necessary to adjust.
Easy Adjust Exhaust Flap. No tools necessary to adjust.
PTO Shaft & Cover is standard. 540PTO RPM recommended.
4-Bolt, cast iron, self aligning greaseable bearings.
All Moving Parts Guarded. Full Set of Safety Decals.
Orange, Polyester Powder Coat Paint Provides Excellent Outdoor
Weatherability and Offers Protection Against Ultra Violet Discoloration.
All Parts Painted Separately.
Length: 6’10”
Width: 6’ 3-1/2”
Height: 6’11”
Weight: 1,350-lbs.
Specifications & Options Subject to Change Without Notice
REV. 1/2013
MANUFACTURER OF OUTDOOR POWER EQUIPMENT
Products for Turf & Lawncare, Rental, Construction, Tree Care, Wood Processing, Nursery & Farm Industries
Other Salsco Equipment
3-1/2” - 18” Capacity, Gas, Diesel, & P.T.O., Wood/Brush Chippers
Chipper Shredder Vacuums - Tailgate & Truckloader Vacuums
Shaving Mills from 14 yds. - 48 yds Per Hour, Electric & Diesel Powered
Gas & Electric Greens Rollers - Bale Wrappers & Bale Handlers
105 School House Road
Cheshire, CT 06410 U.S.A.
800-872-5726 (Toll Free), 203-271-1682, 203-271-2596 (Fax)
www.salsco.com, [email protected] (email)