Header Mount Models

AWS PARTS BOOK
Header Mount Models
Version 120822
TABLE OF CONTENTS
PARTS ORDER INFORMATION........................................................................ 3
FAN AND DRIVE TYPES................................................................................... 4
ALL MODELS:
BLOWER ASSEMBLY................................................................ 5
ROTARY SCREEN ASSEMBLY................................................... 6
THROTTLE CONTROLS............................................................ 7
HEADER MOUNT ASSEMBLIES............................................... 8
FRAME ASSEMBLIES............................................................... 9
DRIVE ASSEMBLIES................................................................. 10
IDLER ASSEMBLIES................................................................. 11
PTO COMPONENTS................................................................ 12
REAR TUBE COMPONENTS.....................................................13
MANIFOLD COMPONENTS..................................................... 14
CABLE KIT ASSEMBLY.............................................................. 16
JOHN DEERE:
900 SERIES DRIVE AND ATTACHMENT.................................... 17
900 SERIES MOUNT ARMS..................................................... 18
600 SERIES DRIVE AND ATTACHMENT .................................. 19
600 SERIES MOUNT ARMS..................................................... 20
640FD DRIVE AND ATTACHMENT.......................................... 21
640FD DUAL DRIVE AND ATTACHMENT................................ 22
640FD MOUNT ARMS............................................................ 23
LEXION:
F535 AND 540 DRIVE AND ATTACHMENT.............................. 24
F535 AND 540 MOUNT ARMS............................................... 25
CLAAS:
1050 AND 1200 DRIVE AND ATTACHMENT............................ 26
1050 AND 1200 MOUNT ARMS............................................. 27
CASE/NH:
CASE 1020 DRIVE AND ATTACHMENT.................................... 28
CASE 1020 MOUNT ARMS......................................................29
CASE 2020/ NH 74C DRIVE AND ATTACHMENT......................30
NH 973 DRIVE AND ATTACHMENT......................................... 33
CASE 2020/ NH 74C AND NH 973 MOUNT ARMS................. 34
CASE 3020/ NH 740CF DRIVE AND ATTACHMENT..................35
CASE 3020/ NH 740CF MOUNT ARMS................................... 36
AGCO:
AGCO 500 800 8000 8200 DRIVE AND ATTACHMENT........... 37
AGCO DYNAFLEX DRIVE AND ATTACHMENT.......................... 38
AGCO MOUNT ARMS............................................................. 39
2
PARTS ORDER INFORMATION
Contact Info:
TEMP Farm Equipment Ltd.
3890 Wellington St. Box 269
Mitchell, Ontario, Canada
N0K-1N0
Phone: 1-877-348-0066 or 519-348-0066
Fax: 519-348-0061
Parts Orders: Craig Rock [email protected]
Sales: Jeff Dolmage [email protected]
Sales: Greg Aitken [email protected]
Technical Info: Mike DeCorte [email protected]
Administration: Ryan Yoanidis [email protected]
Installations: Dave Miller [email protected]
Terms and Conditions:
1. All goods returned must be unused and are subject to a 10% handling fee.
They must be shipped back to AWS prepaid.
2.
All goods are F.O.B Mitchell, Ontario, Canada.
3.
Please indicate preferred shipment method with order
Typical:
US:
Via UPS ground collect
Western Canada:
Via DHL ground collect
Ontario:
Cardinal Couriers Collect
*Western US Orders:
Shipped from Aemsco warehouse in Minot, North Dakota via
Speedy Couriers. Freight is prepaid and invoiced.
3
FAN AND DRIVE TYPES
Right and Left Hand Header Mounts
Right Hand “A” drives include:
John Deere 600 series auger flex heads
Case IH 2020 series auger flex heads
Case IH 3020 series auger flex heads
New Holland 74C series auger flex heads
New Holland 740CF series auger flex heads
Case IH 1020 single drive
Honeybee Rigid and Flex Draper heads
Right Hand “B” drives include:
AGCO (Massey, Gleaner, Challenger) auger flex heads
Case IH 1020 series single drive heads
New Holland 73C series single drive auger heads
Lexion single reel and split reel heads
Left Hand “A” drives include:
John Deere 900 and 200 series heads
Case IH 1020 dual drive
Harvestmore heads
Series 2 Header Mounts
(“A” drive configuration only)
Mac Don Headers
John Deere Flex Drapers
*See page 8 for parts index.
4
BLOWER ASSEMBLY
Right Hand Header Mount Shown
THROTTLE CONTROL
-SEE PAGE #7 FOR DETAILS
ABOUT DIFFERNET
THROTTLE CONTROL
SETUPS.
ITEM #
PART #
1) AWS0069
2) AWS0068
3) AWS0071
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
AWS0157
AWS0067
AWS0065
AWS0230
DESCRIPTION
QTY
FAN HOUSING, RH
FAN HOUSING, LH
IMPELLER, RIGHT HAND
H7/8 HUB (INCLUDED WITH IMPELLOR)
LIFT HOOK
NYLOCK NUT, 5/16”
BOLT , 5/16” x 1-1/4”
BOLT , 5/16” x 1-1/2” (BOLTS FOR HOOK )
FAN PLATE
BOLT, 1/2 x 3/4
SERIAL NUMBER PLATE
3/8” SELF TAPPING BOLT (4/MANUAL, 2/ELECTRIC ACTUATOR)
ROTARY SCREEN ASSEMBLY (SEE PAGE #6)
¼”NC x 1” HEX BOLT
1
1
1
1
1
12
10
2
1
4
1
4
1
2
Fan decals are dependent on make and model.
Part numbers are as follows:
ITEM#
PART #
15) AWS0162
AWS0339
AWS0165
AWS0267
AWS0268
AWS0394
DESCRIPTION
QTY
AWS Decal
Model Decal (2010)
“C” Style Decal
“S” Style Decal
“R” Style Decal
“N” Style Decal
1
1
1
1
1
1
* Mount Impellor to fan shaft
using 7/8" Browning Bushing
that comes with impellor.
* Do not use bolts that come
with impellor, instead replace
with ¼” X 1” bolt (not shown).
5
ROTARY SCREEN ASSEMBLY
For all models
AWS0230
ROTARY SCREEN ASSEMBLY
ITEM #
DESCRIPTION
QTY
ROTARY SCREEN SUPPORT
SPACER, ROTARY SCREEN
BEARING, ROTARY SCREEN AS202-101
BEARING FLANGE, PF203
ROTARY SCREEN
ROTARY SCREEN CAP
¼” NC X ¾” CARRIAGE BOLT
¼” NC NYLOCK NUT
3/8” NC X 1” FLANGE HEX SELF TAP BOLT
ROTARY SCREEN CLEANOUT
1
1
2
4
1
1
6
6
4
1
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
PART #
AWS0076
AWS0384
AWS0078
AWS0079
AWS0077
AWS0080
AWS0081
AWS0127
FAN SHAFT ASSEMBLY; 14”
ITEM #
DESCRIPTION
QTY
FAN SHAFT, 14”
SNAP RING, 1-1/8” EXT.
BEARING, FANSHAFT 6206-2RS C3
FAN SHAFT HOUSING, 17.5”
3/16” X 2” KEY
¼” X 2” KEY
1
1
2
1
1
1
1)
2)
3)
4)
5)
6)
PART #
AWS0035
AWS0036
AWS0037
AWS0038
AWS0073
AWS0034
6
THROTTLE CONTROLS
There are two different throttle control arrangements used to regulate the air flow. These can be
either manually controlled or actuator controlled; each with left and right arrangements depending
on which side of the head the fan is mounted.
1. ACTUATOR CONTROLLED; RIGHT HAND SHOWN
1.
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
PART #
AWS0114
AWS0212
AWS0095
AWS0213
DESCRIPTION
QTY
THROTTLE PLATE
1
THROTTLE SHAFT, RIGHT; ELECTRIC 1
HEADER MOUNT ACTUATOR
1
ACTUATOR MOUNT; HEADER MT. 1
3/8” NC X 1 ½” HEX BOLT
1
#10-32 SS NYLOCK NUT
2
3/8” NC HEX FLANGE NUT
2
M10 X 30 STUD
1
3/8” SPRING WASHERS
4
3/8” FLAT WASHER
4
M10-1.5 FLANGE NYLON LOCKNUT 1
3/8” NC X 1 ¾” HEX BOLT
2
3/8” NC X 2” HEX BOLT
1
10-32 X ¾” SOCKET HD. CAP SCRW. 2
3/8” NC STOVER LOCKNUT
1
2. MANUALLY CONTROLLED; RIGHT HAND SHOWN
ITEM #
2.
PART #
1) AWS0114
2) AWS0074
3)
4)
5)
6)
7)
8)
DESCRIPTION
QTY
THROTTLE PLATE
1
THROTTLE CONTROL; RH MANUAL 1
M10 X 30 STUD
1
3/8” FLAT WASHER
2
M10-1.5 FLANGE NYLON LOCKNUT 1
3/8” SPRING WASHERS
4
#10-32 SS NYLOCK NUT
2
10-32 X ¾” SOCKET HD. CAP SCRW. 2
* ARRANGE SPRING WASHERS
SO THAT BEVEL ALTERNATES.
7
HEADER MOUNT ASSEMBLIES
SERIES 2 FRAME ASSEMBLY:
*HEADER MOUNT ASSEMBLIES THAT
REQUIRE A SERIES 2 FRAME HAVE
IDENTICAL COMPONENTS EXCEPT FOR
FRAME. SEE PAGE #9 FOR DETAILS.
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
PART #
AWS0127
AWS0039
AWS0029
AWS0033
AWS0025
AWS0110
12) AWS0049
13) AWS0020
14)
DESCRIPTION
QTY
HEADER MOUNT BLOWER ASSEMBLY (P.5)
HEADER MOUNT FRAME ASSEMBLY (P.9)
PRIMARY DRIVE ASSEMBLY (P.10)
PRIMARY IDLER ASSEMBLY (P.11)
SECONDARY DRIVE ASSEMBLY (P.10)
SECONDARY IDLER ASSEMBLY (P.11)
FAN SHAFT ASSEMBLY; 14” (P.6)
U-BOLT; 3/8” NC X 3”
SHEAVE, 3VX5.3-3
SDS 1 1/8" BUSHING
A DRIVE BELT; 3Vx750-3
B DRIVE BELT; 3Vx670-3
SHIELD ASSEMBLY; RIGHT
BELT, 5Vx630-4
3/8” NC FLANGE NUT
1
1
1
1
1
1
1
2
1
1
1
1
1
1
7
8
FRAME ASSEMBLIES
RIGHT HAND FRAME ASSEMBLIES SHOWN
AUGER HEADER MOUNT FRAME ASSEMBLY :
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
PART #
AWS0126
AWS0045
AWS0042
AWS0047
AWS0306
AWS0307
AWS0041
AWS0040
SERIES 2 FRAME ASSEMBLY :
DESCRIPTION
QTY
ITEM #
TOP BRACKET
UPPER SHIELD SUPPORT
3/8” NC X 1” BOLT
SPACER, 1/2” I.D. X 4-1/4
SPACER, LOWER SHIELD
FRAME SUPPORT LEFT
FRAME SUPPORT RIGHT
3/8” NC X 5-1/2” BOLT
1/2” NC X 5-1/2” BOLT
FRAME RAIL, FAN SIDE
3/8” NC SERATED FLANGE NUT
FRAME RAIL, DRIVE SIDE
1/2” NC STOVER LOCK NUT
1
1
8
1
1
1
1
1
1
1
9
1
1
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
PART #
AWS0126
AWS0045
AWS0047
AWS0620
AWS0042
AWS0619
AWS0618
DESCRIPTION
QTY
TOP BRACKET
UPPER SHIELD SUPPORT
3/8” NC X 1” HEX BOLT
3/8” NC X 5 ½” HEX BOLT
SPACER; LOWER SHIELD
FRAME PLATE
SPACER ½” ID X 4 ¼”
FRAME RAIL; LH SERIES 2
FRAME RAIL; RH SERIES 2
½” NC X 5 ½” HEX BOLT
½” NC STOVER NUT
3/8” NC FLANGED HEX NUT
1
1
16
1
1
2
1
1
1
1
1
17
9
DRIVE ASSEMBLIES
PRIMARY DRIVE ASSEMBLY:
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
PART #
AWS0011
AWS0008
AWS0211
AWS0003
AWS0001
AWS0420
DESCRIPTION
QTY
5/16” KEY
1
BUSHING; E 1 3/8”
1
DRIVE SHAFT; (DEPENDS ON HEAD) 1
SHEAVE, 5VX12.50-4
1
BEARING 1 3/8”
2
BEARING FLANGE, PF207
2
BEARING FLANGE; GREASABLE
2
3/8” NC X ¾” CARRIAGE BOLT
6
3/8” NC FLANGED HEX NUT
6
SECONDARY DRIVE ASSEMBLY:
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
PART #
AWS0021
AWS0011
AWS0024
AWS0022
AWS0026
AWS0027
AWS0003
AWS0001
AWS0420
AWS0033
AWS0028
DESCRIPTION
QTY.
SHAFT; SECONDARY HM
KEY; 5/16” X 2”
SHEAVE, 5VX5.50-4
BUSHING; SPLIT TAPER SD 1 3/8”
A DRIVE SHEAVE, 3VX19.0-3
B DRIVE SHEAVE- 3VX14.0-3
BEARING, 1 3/8” WR UNA207-22G
FLANGE, BEARING PF207
FLANGE, GREASABLE
A DRIVE BUSHING; SF 1 3/8”
B DRIVE BUSHING; SK 1 3/8”
CARRIAGE BOLT 3/8” X ¾”
3/8” NC FLANGE NUT
1
2
1
1
1
1
2
2
1
1
6
6
10
IDLER ASSEMBLIES
PRIMARY IDLER ASSEMBLY:
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
PART #
AWS0013
AWS0015
AWS0014
AWS0017
AWS0018
AWS0019
AWS0012
SECONDARY IDLER ASSEMBLY:
DESCRIPTION
QTY
ITEM #
IDLER ARM, PRIMARY
7/16” NC X 5” BOLT
7/16” FLAT WASHER
SPRING EXTENSION
SPACER, ½” x 3 ½”
SPACER, ½” X 1 3/16”
½” NC STOVER LOCKNUT
3/8” NC STOVER LOCKNUT
BUSHING, TENSIONER
3/8” NC X 1 ¼” BOLT
IDLER, HM PRIMARY
½” NC X 5” BOLT
7/16” NC JAM NUT
2
1
1
1
1
2
2
2
2
2
1
2
1
1)
2)
3)
4)
5)
PART #
AWS0113
AWS0017
AWS0112
AWS0111
AWS0119
6)
7)
8) AWS0019
9)
10) AWS0015
11)
12) AWS0014
13)
14)
DESCRIPTION
QTY
IDLER ARM
SPACER; ½” X 3 ½”
SPACER; ½” X 2 3/8”
½” FLAT WASHER
IDLER, A DRIVE
IDLER, B DRIVE
½” NC STOVER LOCKNUT
3/8” NC X 1 ¼” BOLT
BUSHING, TENSIONER
3/8” NC STOVER LOCKNUT
7/16” NC X 5” BOLT
7/16” FLAT WASHER
SPRING EXTENSION
½” NC X 8 ½” BOLT
7/16” NC JAM NUT
1
1
1
+/- 5
1
1
1
2
2
2
1
1
1
1
1
11
PTO COMPONENTS
PTO ASSEMBLIES :
PART #
DESCRIPTION
QTY
AWS0457
21 SPLINE TO 1 3/8” ROUND
AWS0460
1 1/8” HEX TO 1 3/8” ROUND
AWS0461
6 SPLINE TO 1 3/8” ROUND
AWS0462
6 SPLINE TO 6 SPLINE
AWS0463
1/8” HEX TO 1 1/8” HEX
Please indicate length from end to end
1
1
1
1
1
YOKE COMPONENT DETAILS:
PART #
DESCRIPTION
QTY
AWS0449
AWS0450
AWS0451
AWS0452
AWS0453
AWS0454
AWS0458
AWS0464
AWS0465
AWS0466
AWS0483
HEX QUICK RELEASE
1 1/8” HEX WITH PIN
21 SPLINE QUICK RELEASE
6 SPLINE QUICK RELEASE
1 3/8” ROUND WITH PIN
CROSS BEARING KIT
U- JOINT- 1 1/8” HEX TO 1 3/8” ROUND
1 ¼” HEX WITH PIN
1 ¼” ROUND WITH PIN
1 ½” ROUND WITH PIN
6 SPLINE WITH PIN
1
1
1
1
1
1
1
1
1
1
1
VARIOUS PTO COMPONENTS:
PART #
DESCRIPTION
QTY
AWS0011
AWS0455
AWS0456
AWS0520
KEY 5/16” X 2”
SHIELD KIT FOR PTO
PTO SHIELD BEARING
TIE CHAIN FOR PTO
1
1
1
1
* PTO END PROFILES AND LENGTHS DEPEND ON THE
HEADER AND COMBINE MAKE AND MODEL.
12
REAR TUBE ASSEMBLY
ATTACH TO FAN VIA
EITHER RUBBER ELBOW
AND COUPLER OR
SIMPLY FLEX HOSE.
ITEM #
1)
2)
3)
4)
5)
6)
PART #
AWS0085
AWS0084
AWS0174
AWS0086
AWS0160
AWS0441
DESCRIPTION
QTY
HOSE CLAMP 8.25”
FLEX HOSE
REAR MANIFOLD
HOSE CLAMP 8.75”
CONNECTOR
RUBBER ELBOW (45*)
2
1
1
2
2
1
REAR TUBE MOUNTING COMPONENTS VARY WITH DIFFERENT STYLE HEADS:
(JD MOUNTING STYLE SHOWN)
TO TRANSITION TUBE
END. SEE MANIFOLD
COMPONENTS FOR
FURTHER DETAILS.
MacDon Mounting Components:
ITEM #
PART #
1) AWS0153
2) AWS0644
3) AWS0163
4)
5)
6)
DESCRIPTION
John Deere Flex Draper Mounting Components:
QTY
SADDLE W/ STUD
2
SADDLE; REAR ROUND
2
U-BOLT; 8” S.S.
2
¼” NC NYLOCK NUT
4
3/8” NC X 1” HEX FLANGE SELF TAP 4
½” NC HEX JAM NUT
2
ITEM #
PART #
1) AWS0153
2) AWS0163
3)
4)
DESCRIPTION
QTY
SADDLE W/ STUD
U-BOLT; 8” S.S.
¼” NC NYLOCK NUT
½” NC FLANGED NUT
2
2
4
4
13
MANIFOLD COMPONENTS SINGLE REEL
Inlet End
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
PART #
AWS0410
AWS0115
AWS0085
AWS0064
AWS0087
AWS0163
AWS0153
AWS0090
AWS0086
AWS0091
DESCRIPTION
QTY
ITEM #
FLEXHOSE, 8” x 60”
TIE CHAIN ASSEMBLY
HOSECLAMP, 8.25”
TRANSITION TUBE DECAL
TRANSITION TUBE
U-BOLT 8” SS c/w LOCKNUTS
NYLOCK NUT, 1/4” 2 for U-BOLT
SADDLE w STUD
TRANSITION TUBE SUPPORT
FLAT WASHER, 1/2” PLATED
STOVER LOCK NUT, 1/2”
HOSECLAMP, 8.75”
ELBOW, 90 – 8”
1
1
1
1
1
+1
+2
1
1
1
1
2
1
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
PART #
AWS0092
AWS0093
AWS0163
AWS0116
AWS0202
AWS0102
AWS0123
DESCRIPTION
QTY
LOCKSLEEVE
LOCKNUT, 3/8”
BUSHING, LOCKSLEEVE
BOLT, 3/8” NC X 1”
NOZZLE
NOZZLE GASKET
MANIFOLD BALANCER
MANIFOLD (VARIOUS LENGTHS)
MANIFOLD ARM
3/8” NC X 5 ½ ” HEX BOLT
3/8” FLAT WASHER
SADDLE; CLAMP
1
1
1
1
+1
+1
1
1
1
2
2
1
*ITEMS WITH A QUANTITY OF
+1 ARE DEPENDENT ON HEADER
SIZE.
*FROM REAR TUBE
*MANIFOLD BALANCER
IS RIVETED INSIDE THE
MANIFOLD 1/3 OF THE
WAY DOWN THE FROM
THE FAN SIDE.
14
MANIFOLD COMPONENTS SINGLE REEL
End-Cap End
ITEM #
PART #
1) AWS0102
2) AWS0094
AWS0616
3) AWS0123
4) AWS0479
5) AWS0103
6) AWS0191
7)
8)
9)
10)
11)
12)
13)
DESCRIPTION
QTY
MANIFOLD ARM
END CAP ASSEMBLY
END CAP ASSEMBLY; NO ARM (SPLIT REELS)
SADDLE, CLAMP
SPACER; END CAP 4”
ACTUATOR PIVOT
ACTUATOR; MANIFOLD TILT
3/8” NC X 1 ½” HEX BOLT
3/8” NC STOVER LOCKNUT
3/8” NC X ¾” HEX BOLT
¼” NC X ¾” FLANGED HEAD BOLT
#8-18 X3/4” SELF DRILLING SCREW
3/8” FLAT WASHER
3/8” NC X 5” HEX BOLT
1
1
1
1
2
1
1
2
2
2
4
2
4
2
15
CABLE KIT ASSEMBLY
(IF APPLICABLE)
ITEM #
PART #
1) AWS0435
2) AWS0163
3) AWS0433
4)
5)
6)
7)
8)
9)
DESCRIPTION
QTY
SADDLE, CABLE SUPPORT
8” U-BOLT
CABLE TENSIONER
1/8” STEEL CABLE
¼” NC NYLOCK NUT
3/8” NC X 3” HEX BOLT
7/16” NC X 5” HEX BOLT
7/16” NC JAM NUT
CABLE CLAMP
3
3
1
1
6
1
1
1
1
16
JOHN DEERE 900 DRIVE AND ATTACHMENT COMPONENTS
JD 900 SERIES HEADS
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
PART #
AWS0424
AWS0425
AWS0242
AWS0249
AWS0350
AWS0930
AWS0420
AWS0003
AWS0001
AWS0388
DESCRIPTION
QTY
TOP LINK 14”
TOP LINK BRACKET
UNIVERSAL BEARING SUPPORT
UNIVERSAL BRACE, ANGLE
KNIFE DRIVE ASSEMBLY; 11” CUSHION DRIVE
JD 930 1 3/8” SHAFT
BEARING FLANGE; GREASABLE
BEARING, 1 3/8” WIDERACE W/ COLLAR
BEARING FLANGE, PF 207
CASE KNIFE DRIVE PULLEY
½” NC STOVER LOCKNUT
3/8” NC X 1” FLANGE HEX SELF TAPPER
3/8” NC FLANGE NUT
3/8” NC X 1” HEX BOLT
3/8” FLAT WASHER
3/8” NC X ¾” CARRIAGE BOLT
½” NC X 1” HEX BOLT
1
1
1
1
1
1
1
3
1
1
4
6
5
2
2
3
4
Early JD900 Heads:
AWS0458 U-Joint 1 1/8” hex – 1 3/8” RB
To couple round shaft to hex shaft
Late JD 900 Heads:
AWS0314 Yoke, #35 1-3/8rb t
o replace yoke on original powershaft.
AWS0350; KNIFE DRIVE ASSEMBLY
ITEM #
1)
2)
3)
4)
5)
6)
PART #
AWS0380
AWS0381
AWS0382
AWS0393
DESCRIPTION
QTY
KNIFE DRIVE CUSHION
KNIFE DRIVE CENTRE
KNIFE DRIVE HUB
KNIFE DRIVE BUSHING AND BOLTS
5/16” NC X 1” HEX BOLT
5/16” NC NYLOCK NUT
1
1
1
1
6
6
17
JOHN DEERE 900 MOUNT ARMS
AWS0245
JD 900 MOUNT ARM ASSEMBLY, LEFT
ITEM #
DESCRIPTION
QTY
JD MOUNT ARM BASE, LEFT
JD MOUNT ARM TUBE
JD MOUNT ARM SLIDE
ADJUSTMENT LINK, 10”
1/4” X 3/4” THREAD CUT TYPE F
BOLT, 1/2” X 1”
TOP LOCK NUT, 1/2”
BOLT, 1/2” X 3”
FLANGE HEX NUT, 1/2”
BOLT, 3/8” X 3-1/2”
FLAT WASHER, 1/2”
BOLT, 3/8” NC X 3/4”
1
1
1
1
2
1
2
1
1
1
2
1
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
PART #
AWS0104
AWS0207
AWS0359
AWS0109
AWS0246
JD 900 MOUNT ARM ASSEMBLY, RIGHT
ITEM #
DESCRIPTION
QTY
JD MOUNT ARM BASE, LEFT
JD MOUNT ARM TUBE
JD MOUNT ARM SLIDE
ADJUSTMENT LINK, 10”
1/4” X 3/4” THREAD CUT TYPE F
BOLT, 3/8” NC X 3/4”
BOLT, 1/2” X 3 1/2”
TOP LOCK NUT, 1/2”
BOLT, 1/2” X 1”
FLANGE HEX NUT, 1/2”
FLAT WASHER, 1/2”
BOLT, 1/2” X 3”
1
1
1
1
2
1
2
2
1
1
2
1
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
PART #
AWS0105
AWS0207
AWS0359
AWS0109
18
JOHN DEERE 600 SERIES ATTACHMENT AND DRIVE COMPONENTS
BLOWER MOUNTING COMPONENTS
ITEM #
PART #
1) AWS0306
AWS0307
2) AWS0414
3) AWS0413
4) AWS0407
5)
6)
7)
8)
9)
10)
DESCRIPTION
QTY
FRAME SUPPORT; LH
FRAME SUPPORT; RH
TOP LINK BRACKET; JD 600
TOP LINK 11”
UNIVERSAL BRACKET, CHANNEL
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” HEX BOLT
3/8” NC X 1 ¼” HEX BOLT
3/8” NC X 1” FLANGE HEX SELFTAP
3/8” NC FLANGE NUT
1
1
1
1
1
6
6
8
2
2
14
ALL JOHN DEERE 600 SERIES HEADER MOUNT DRIVES REQUIRE
(SEE PTO PAGE FOR DETAILS; P.#12)
PART #
DESCRIPTION
QTY
AWS0457
PTO 21SPL–1-3/8”RND
1
11) ONE DRIVE SHAFT:
AWS0294 UNIVERSAL SHAFT, 14”
AWS0508 UNIVERSAL SHAFT, 48”
AWS0412 UNIVERSAL SHAFT, 72”
1
1
1
FOR 622 – 25FT HEAD OR LESS
FOR 630 – 30 FT HEAD
FOR 635 – 35 FT HEAD
+ ALL HEADS 25’ OR GREATER
REQUIRE A BEARING SUPPORT
ASSEMBLY AS SEEN BELOW
BEARING SUPPORT ASSEMBLY
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
PART #
AWS0240
AWS0242
AWS0003
AWS0001
AWS0420
AWS0249
DESCRIPTION
QTY
PTO GUARD
UNIVERSAL BEARING SUPPORT
BEARING, 1 3/8” WIDERACE
BEARING FLANGE, PF207
BEARING FLANGE, GREASABLE
UNIVERSAL BRACE, ANGLE
3/8” NC X 1 ¼” CARRIAGE BOLT
3/8” NC SER. FLANGE NUT
3/8” NC FLAT WASHERS
3/8” NC X 1” BOLT
1
1
1
1
1
1
3
8
5
2
+ MOUNTING HARDWARE FOR BEARING SUPPORT:
MOUNTING HARDARE WILL BE MADE UP OF EITHER
3/8” NC X 1” SELF TAPPERS AND/OR A COMBINATION
OF 3/8” NC X 1” BOLTS WITH FLANGE NUTS.
19
JOHN DEERE 600 SERIES MOUNT ARMS
JD 600 OUTER MOUNT ARMS; AWS0404
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
PART #
AWS0477
AWS0398
AWS0538
AWS0487
DESCRIPTION
QTY
JD MOUNT ARM BRACKET
SPACER, 1/2” X 1-7/8”
ROLLER, 1-7/8”
JD MOUNT ARM TUBE
TOP LOCK NUT, 1/2”
BOLT, 3/8” NC X 3/4”
BOLT, 1/2” X 2-1/2”
BOLT, 1/2” X 3”
BOLT, 3/8” X 1”
FLANGE HEX NUT, 3/8”
1
1
1
1
5
1
1
4
2
2
20
JD 640 FLEX DRAPER ATTACHMENT AND DRIVE COMPONENTS
JD 640FD ATTACHMENT PARTS
ITEM #
PART #
1) AWS0541
2) AWS0540
3) AWS0531
AWS0548
4) AWS0031
5) AWS0294
6)
7)
8)
9)
10)
DESCRIPTION
QTY
LOWER FRAME SUPPORT B; RIGHT
LOWER FRAME SUPPORT B; LEFT
TOP SUPPORT 600FD
TOP SUPPORT 600FD (DUAL FAN)
U-BOLT 3/8” X 3”
UNIVERSAL SHAFT; 14”
3/8” NC FLANGE NUT
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” HEX BOLT
3/8” NC X 1” FLANGED HEX SELF TAP
1
1
1
1
2
1
6
2
2
4
8
+PTO: AWS0457 PTO-W; 21SP- 1 3/8” RB
21
JD 640 FLEX DRAPER DUAL FAN DRIVE COMPONENTS
JD600 FLEX DRAPER- DUAL FAN DRIVE
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
PART #
AWS0572
AWS0578
AWS0576
AWS0577
AWS0573
AWS0003
AWS0001
AWS0420
AWS0574
AWS0242
AWS0582
AWS0575
AWS0240
AWS0579
DESCRIPTION
QTY
ITEM #
600FD SUPPORT PLATE
SPROCKET, LOWER
600FD HEX ADAPTOR
SPROCKET, UPPER
600FD BEARING PLATE
BEARING, 1 3/8”
BEARING FLANGE, PF207
BEARING FLANGE, GREASABLE
600 DD SHIELD
UNIVERSAL BEARING SUPPORT
600FD BEARING BRACKET
600FD SHIELD ANGLE
PTO GUARD
BUSHING, 2517 X 1 3/8”
1
1
1
1
1
2
2
2
1
1
1
1
1
1
15) AWS0581
16) AWS0034
17) AWS0583
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
PART #
DESCRIPTION
QTY
POLY CHAIN GT2, 14MGT-99437 1
KEY ¼” X 2”
1
600FD SHAFT
1
¼” NC X ¾” THREAD CUT, TYPE F SS 3
7/16” NC X 5” BOLT
2
16mm FLAT WASHER
2
3/8” NC X 1 ¼” CARRIAGE BOLT
10
3/8” NC FLANGED HEX NUT
15
3/8” NC X 1 ¾” SOCKET HEAD CAP 5
¼” NC X 2” SOCKET HEAD CAP
2
3/8” FLAT WASHER
5
3/8” X 1” HEX BOLT
2
3/8” X 1” FLANGE HEX SELF TAP
3
7/16” NC JAM NUT
2
22
JOHN DEERE 640FD MOUNT ARMS
JD640FD CENTRE MOUNT BRACKET:
ITEM #
PART #
1) AWS0543
2) AWS0399
3) AWS0359
4)
5)
6)
7)
8)
9)
AWS0584
JD 640FD MOUNT ARM; LEFT
ITEM #
DESCRIPTION
QTY
MOUNT ARM BRKT. LEFT; JD640FD
MOUNT ARM BRKT. RIGHT; JD640FD
MOUNT ARM TUBE; JD600, 3020, 740C
JD MOUNT ARM SLIDE
SPACER ½” X 2”
½” NC X 3” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC FLANGE HEX NUT
3/8” NC X ¾” HEX BOLT
½” NC X 2 ½” HEX BOLT
¼” NC X ¾” THREAD CUT HEX TYPE F SS
3/8” NC X ¾” HEX BOLT
1
1
1
1
1
3
4
2
2
1
2
1
PART #
1) AWS0542
AWS0544
2) AWS0399
3) AWS0359
4) AWS0459
5)
6)
7)
8)
9)
10)
11)
DESCRIPTION
QTY
JD600 CENTRE MOUNT BRACKET 1
MOUNT ARM TUBE
1
MOUNT ARM SLIDE
1
¼” NC X ¾” THREADCUT HEX TYPE F1
½” NC X 3” HEX BOLT
2
½” NC STOVER LOCKNUT
3
½” NC X 2” HEX BOLT
1
3/8” NC X 1” HEX BOLT
3
3/8” NC LOCKNUT
2
*LEFT AND RIGHT SETS ARE IDENTICAL
EXCEPT FOR BOLT DIRECTION AND
MOUNT ARM BRACKETS.
23
LEXION F535 AND 540 DRIVE AND ATTACHMENT COMPONENTS
ITEM #
PART #
1) AWS0306
AWS0307
2) AWS0614
3) AWS0407
4) AWS0413
5)
6)
7)
8)
DESCRIPTION
QTY
ITEM #
FRAME SUPPORT; LH
FRAME SUPPORT; RH
TOP LINK BRACKET; LEXION
UNIVERSAL BRACKET, CHANNEL
TOP LINK 11”
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” HEX FLANGE SELFTAP
3/8” NC FLANGE NUT
1
1
1
1
1
6
6
10
8
9)
3/8” NC X 1” HEX BOLT
10) ONE DRIVE SHAFT AND ONE PTO:
(SEE PTO PAGE FOR DETAILS;#12)
PART #
DESCRIPTION
QTY
8
AWS0412
AWS0615
SHAFT, 72” UNIVERSAL:
SHAFT, 102” UNIVERSAL:
F535
F540
AWS0457
PTO-W; 21SP- 1 3/8” RB
(ALL HEADS)
+ MOUNTING HARDWARE FOR BEARING SUPPORT:
MOUNTING HARDARE WILL BE MADE UP OF EITHER
3/8” NC X 1” SELF TAPPERS AND/OR A COMBINATION
OF 3/8” NC X 1” BOLTS WITH FLANGE NUTS.
BEARING SUPPORT ASSEMBLY
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
PART #
AWS0240
AWS0242
AWS0003
AWS0001
AWS0420
AWS0249
DESCRIPTION
PTO GUARD
UNIVERSAL BEARING SUPPORT
BEARING, 1 3/8” WIDERACE
BEARING FLANGE, PF207
BEARING FLANGE, GREASABLE
UNIVERSAL BRACE, ANGLE
3/8” NC X 1 ¼” CARRIAGE BOLT
3/8” NC SER. FLANGE NUT
3/8” NC FLAT WASHERS
3/8” NC X 1” BOLT
3/8” NC X ¾” CARRIAGE BOLT
F535QTY
1
1
1
1
1
1
3
8
5
2
0
F540QTY
1
2
2
2
2
2
3
13
7
4
3
*F540 REQUIRES A SECOND BEARING
SUPPORT. SEE B.O.M FOR ADDITIONAL
PARTS.
24
LEXION MOUNT ARMS
LEXION MOUNT ARM ASSEMBLY, LEFT
ITEM #
PART #
1) AWS0609
2) AWS0443
3)
4)
5)
6) AWS0613
7)
8)
9)
10)
11)
-
DESCRIPTION
QTY
LEXION MOUNT ARM
HEIGHT ADJ. LINK 14”
½” NC FLANGE NUT
½” NC X 3” BOLT
½” FLAT WASHER
CAT LINK BASE
½” NC X 2 ½” BOLT
½” NC STOVER LOCKNUT
3/8” NC X ¾” BOLT
M10 X 1.5 X 70 BOLT
AM-M10-N NUT
1
2
1
2
1
1
1
2
1
1
1
LEFT ASSEMBLY SHOWN. RIGHT ASSEMBLY IDENTICAL
EXCEPT BOLTS ARE REVERSED SO THAT BOLT HEADS
ARE ON OUTSIDE.
25
CLAAS 1050 AND 1200 DRIVE AND ATTACHMENT COMPONENTS
ITEM #
PART #
DESCRIPTION
1) AWS0306
AWS0307
2) AWS0521
3) AWS0424
4) AWS0519
5)
6)
7)
8)
9)
10)
QTY
FRAME SUPPORT; LH
FRAME SUPPORT; RH
TOP LINK BRACKET; CLAAS
TOP LINK 14”
UNIVERSAL CHANNEL; CLAAS
MAFLEX HEADS (SHORT)
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” HEX FLANGE SELFTAP
3/8” NC X 1” HEX BOLT
3/8” NC FLANGE NUT
ONE DRIVE SHAFT AND ONE PTO:
(SEE PTO PAGE FOR DETAILS;#12)
1
1
1
1
AWS0412
AWS0615
SHAFT, 72” UNIVERSAL:
SHAFT, 102” UNIVERSAL:
MAXFLEX 1050
MAXFLEX 1200
AWS0457
PTO-W; 21SP- 1 3/8” RB
(ALL MODELS)
1
6
6
7
8
8
BEARING SUPPORT ASSEMBLY
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
PART #
AWS0240
AWS0242
AWS0003
AWS0001
AWS0420
AWS0249
DESCRIPTION
QTY
PTO GUARD
UNIVERSAL BEARING SUPPORT
BEARING, 1 3/8” WIDERACE
BEARING FLANGE, PF207
BEARING FLANGE, GREASABLE
UNIVERSAL BRACE, ANGLE
3/8” NC X 1 ¼” CARRIAGE BOLT
3/8” NC SER. FLANGE NUT
3/8” NC FLAT WASHERS
3/8” NC X 1” BOLT
1
1
1
1
1
1
3
8
5
2
+ MOUNTING HARDWARE FOR BEARING SUPPORT:
MOUNTING HARDARE WILL BE MADE UP OF EITHER
3/8” NC X 1” SELF TAPPERS AND/OR A COMBINATION
OF 3/8” NC X 1” BOLTS WITH FLANGE NUTS.
26
CLAAS MAXFLEX MOUNT ARMS
CLAAS OUTER MOUNT ARM:
AWS0522 CLAAS MOUNT ARM ASSEMBLY, LEFT
ITEM #
PART #
1) AWS0533
AWS0524
2)
3)
4)
5) AWS0399
6)
7) AWS0359
8)
9)
10)
11)
LEFT ASSEMBLY SHOWN
CLAAS CENTRE MOUNT ARM:
-
CONSISTS OF:
DESCRIPTION
QTY
CLAAS MOUNT ARM BRKT, LEFT
CLAAS MOUNT ARM BRKT, RIGHT
BOLT, 3/8” X 3/4”
TOP LOCK NUT, 1/2”
BOLT, 1/2” X 2-1/2”
MOUNT ARM TUBE
1/4” X 3/4” THREAD CUT TYPE F
JD MOUNT ARM SLIDE
BOLT, M10 X 75 HEX
NYLON LOCKNUT, M10-1.5
BOLT, 1/2” X 2-3/4”
BOLT, 1/2” X 3”
1
1
1
5
1
1
2
1
1
1
2
2
LEFT ASSEMBLY SHOWN. RIGHT ASSEMBLY IDENTICAL
EXCEPT FOR MOUNT ARM BRACKET AND BOLTS ARE
REVERSED SO THAT BOLT HEADS ARE ON OUTSIDE.
CLAAS CENTRE MOUNT ARM ( SAME AS LEXION MOUNT ARMS)
ITEM #
PART #
1) AWS0609
2) AWS0443
3)
4)
5)
6) AWS0613
7)
8)
9)
10)
11)
DESCRIPTION
QTY
LEXION MOUNT ARM
HEIGHT ADJ. LINK 14”
½” NC FLANGE NUT
½” NC X 3” BOLT
½” FLAT WASHER
CAT LINK BASE
½” NC X 2 ½” BOLT
½” NC STOVER LOCKNUT
3/8” NC X ¾” BOLT
M10 X 1.5 X 70 BOLT
AM-M10-N NUT
1
2
1
2
1
1
1
2
1
1
1
27
CASE 1020 DRIVE AND ATTACHMENT COMPONENTS
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
PART #
DESCRIPTION
QTY
AWS0638
AWS0424
AWS0051
LOWER SUPPORT ANGLE
TOP LINK 14”
CASE 1020 TOP LINK BRACKET
3/8” NC X 1” HEX FLANGE SELFTAP
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC FLANGE NUT
3/8” NC X 1” HEX BOLT
½” NC FLANGE NUT
ONE DRIVE SHAFT AND ONE PTO:
(SEE PTO PAGE FOR DETAILS;#12)
4
1
1
12
6
6
17
11
2
AWS0351
AWS0352
AWS0353
AWS0354
AWS0355
17.5’ , 1 3/8” SHAFT:
20’ ,1 3/8” SHAFT:
22 1/2’, 1 3/8” SHAFT:
25’ , 1 3/8” SHAFT:
30’ , 1 3/8” SHAFT:
17.5’ HEADS
20’ HEADS
22 1/2’ HEADS
25’ HEADS
30’ HEADS
AWS0457
PTO; 1 1/8” HEX TO ROUND-ALL HEADS
AWS0057
AWS0288
AWS0032
AWS0310
AWS0011
AWS0304
AWS0196
CASE BEARING SUPPORT
CASE END BRACKET, HM
BUSHING SF 1 3/8”
SHEAVE, C10.5-1, CASE
KEY, 5/16” X 2”
SHOCK BRACKET
SHOCK w/ BUSHINGS
1
1
1
1
1
1
1
PTO HERE
DRIVE COMPONENTS:
PRIMARY DRIVE
HERE
18)
19)
20)
21)
22)
23)
24)
25)
AWS0233
AWS0003
AWS0001
AWS0420
GOLD WASHERS
BEARING 1 3/8” W/ COLLAR
BEARING FLANGE PF207
BEARING FLANGE; GREASABLE
3/8” NC X ¾” CARRIAGE BOLT
½” NC X 3” HEX BOLT
½” FLAT WASHER
½” NC X 2” HEX BOLT
+AWS0061 BELT C-115
28
4
2
2
2
6
1
+ 10
1
1
CASE 1020 MOUNT ARM BRACKETS
LEFT ASSEMBLY
RIGHT ASSEMBLY
CASE 1020 MOUNT ARMS:
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
PART #
AWS0106
AWS0233
AWS0206
AWS0109
DESCRIPTION
QTY
CASE MOUNT ARM TUBE
GOLD DECK WASHER
CASE MOUNT ARM TAB
ADJUSTING LINK, 11”
BOLT, 3/8” NC X 3/4”
BOLT, 1/2” X 3”
FLANGE NUT, 1/2”
BOLT, 1/2” X 3 1/2”
BOLT, 1/2” X 1” OR
BOLT, 3/8” X 1”
DEPENDING ON REEL STYLE
TOP LOCK NUT, 1/2”
NUT, 1/2” OR 3/8”
1
1
2
1
2
1
1
1
4
1
4
29
CASE 2020/NH 74C - E DRIVE AND ATTACHMENT COMPONENTS
*DIRECT DRIVE REELS
CASE 2020/NH74C E
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
PART #
AWS0328
AWS0446
AWS0424
AWS0480
DESCRIPTION
NH BEARING SUPPORT 73C/74C
CASE 2020 END BRACKET
UNIVERSAL TOP LINK, LONG
CNH TOP BRACKET
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” FLANGE HEX SELF TAPPER
½” NC X 3” HEX BOLT
½” FLAT WASHER
+AWS0475 BELT C-116
QTY
2
1
1
1
4
4
9
2
2
1
30
CASE 2020/NH 74C - L DRIVE AND ATTACHMENT COMPONENTS
*CHAIN DRIVE REELS
CASE 2020/NH74C L
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
PART #
AWS0057
AWS0446
AWS0424
AWS0480
DESCRIPTION
CASE BEARING SUPPORT
CASE 2020 END BRACKET
UNIVERSAL TOP LINK, LONG
CNH TOP BRACKET
½” NC X 1” HEX BOLT
3/8” NC X 1” FLANGE HEX SELF TAPPER
½” NC STOVER LOCKNUT
3/8” NC X 1” HEX BOLT
3/8” NC FLANGE NUT
+AWS0457 PTO-W 21SP- 1 3/8” RB
+AWS0475 BELT, C-116
QTY
2
1
1
1
4
5
4
8
8
1
1
31
CASE 2020/NH 74C DRIVE AND ATTACHMENT COMPONENTS
CASE 2020/NH74C – 35’ OPTION
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
PART #
AWS0655
AWS0480
AWS0424
AWS0638
DESCRIPTION
CNH BASE TAB
TOP LINK BRACKET CNH
TOP LINK 14”
LOWER SUPPORT ANGLE
½” NC FLANGE NUT
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” HEX FLANGE SELFTAP
3/8” NC X 1” HEX BOLT
3/8” NC FLANGE NUT
AWS0057 CASE BEARING SUPPORT
AWS0446 CASE 2020 END BRACKET
+AWS0475 BELT, C-116
QTY
2
1
1
2
2
6
4
9
4
4
2
1
1
32
NEW HOLLAND 973 DRIVE AND ATTACHMENT COMPONENTS
•Mount existing bearing support
plate to the NH bearing support,
using existing hardware.
NH 973 BILL OF MATERIALS
ITEM #
PART #
1) AWS0480
2) AWS0424
3) AWS0060
4)
5)
6)
7)
8)
DESCRIPTION
QTY
CNH TOP BRACKET
UNIVERSAL, TOP LINK 14”
NH BEARING SUPPORT 973
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” FLANGE SELF TAP
3/8” NC X 1” HEX BOLT
3/8” NC FLANGE NUT
1
1
2
4
4
9
2
2
33
CASE 2020/NH 74C & 973 MOUNT ARM BRACKETS
CASE 2020 NH 74C & 973 LATE MODEL (HC REEL)
(Bill of materials is for both left and right sets)
CASE 2020 NH 74C EARLY MODEL ( U-2 REEL)
(Bill of materials is for both left and right sets)
ITEM #
PART #
1) AWS0108
2) AWS0107
3) AWS0109
4)
5)
6)
7)
DESCRIPTION
QTY
ITEM #
PART #
AGCO/NH MOUNT ARM, RIGHT
AGCO/NH MOUNT ARM, LEFT
ADJUSTING LINK, 11”
STOVERLOCK NUT, 1/2”
BOLT, 3/8” NC X 3/4”
BOLT, 1/2” NC X 3”
BOLT, 1/2” NC X 4”
1
1
2
4
2
2
2
1) AWS0357
2) AWS0356
3) AWS0109
4)
5)
6)
7)
DESCRIPTION
QTY
AGCO/NH U-2 MOUNT ARM, R
AGCO/NH U-2 MOUNT ARM, L
ADJUSTING LINK, 11”
STOVERLOCK NUT, 1/2”
BOLT, 3/8” NC X 3/4”
BOLT, 1/2” NC X 3”
BOLT, 1/2” NC X 4”
1
1
2
4
2
2
2
EXPLODED VIEWS FOR BOTH HC AND U-2 REELS:
LEFT ASSEMBLY
RIGHT ASSEMBLY
34
CASE 3020/NH 740CF DRIVE AND ATTACHMENT COMPONENTS
ITEM #
PART #
DESCRIPTION
1) AWS0306 FRAME SUPPORT; LH
AWS0307 FRAME SUPPORT; RH
2) AWS0480 TOP LINK BRACKET CNH
3) AWS0413 TOP LINK 11”
4) AWS0407 UNIVERSAL BRACKET, CHANNEL
5)
½” NC X 1” HEX BOLT
6)
½” NC STOVER LOCKNUT
7)
3/8” NC X 1” HEX FLANGE SELFTAP
8)
3/8” NC X 1” HEX BOLT
9)
3/8” NC FLANGE NUT
10) ONE DRIVE SHAFT AND ONE PTO:
(SEE PTO PAGE FOR DETAILS;#12)
QTY
1
1
1
1
1
6
6
7
10
10
AWS0294
AWS0508
AWS0412
SHAFT, 14” UNIVERSAL:
SHAFT, 48” UNIVERSAL:
SHAFT, 72” UNIVERSAL:
20’-25’ HEADS
30’ HEADS
35’ HEADS
AWS0461
PTO-W; 6SP- 1 3/8” RB
(ALL HEADS)
+ ALL HEADS 25’ AND OVER REQUIRE A BEARING SUPPORT
ASSEMBLY AS SEEN BELOW.
BEARING SUPPORT ASSEMBLY
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
PART #
AWS0240
AWS0242
AWS0003
AWS0001
AWS0420
AWS0249
DESCRIPTION
QTY
PTO GUARD
UNIVERSAL BEARING SUPPORT
BEARING, 1 3/8” WIDERACE
BEARING FLANGE, PF207
BEARING FLANGE, GREASABLE
UNIVERSAL BRACE, ANGLE
3/8” NC X 1 ¼” CARRIAGE BOLT
3/8” NC SER. FLANGE NUT
3/8” NC FLAT WASHERS
3/8” NC X 1” BOLT
1
1
1
1
1
1
3
8
5
2
+ MOUNTING HARDWARE FOR BEARING SUPPORT:
MOUNTING HARDARE WILL BE MADE UP OF EITHER
3/8” NC X 1” SELF TAPPERS AND/OR A COMBINATION
OF 3/8” NC X 1” BOLTS WITH FLANGE NUTS.
35
CASE 3020/NH 740CF MOUNT ARM BRACKETS
CASE 3020 NH 740CF
ITEM #
PART #
AWS0513
DESCRIPTION
QTY
CNH 3074 MOUNT ARM ASSEMBLY
CONSISTS OF:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
AWS0507
AWS0487
AWS0459
AWS0538
CNH 3074 MOUNT ARM BRACKET
MOUNT ARM TUBE
SPACER, 1/2” X 2”
ROLLER, 1-7/8”
BOLT, 1/2” X 3”
STOVERLOCK NUT, 1/2”
BOLT, 1/2” X 2-1/2”
FLANGE HEX NUT, 3/8”
BOLT, 3/8” X 2-1/2”
STOVERLOCK NUT, 3/8”
BOLT, 3/8” NC X 3/4”
1
1
1
1
4
4
1
1
1
1
1
36
AGCO 500 800 8000 8200 ATTACHMENT AND DRIVE
COMPONENTS
AGCO 500 800 8000 8200
ITEM #
PART #
1) AWS0306
AWS0307
2) AWS0425
3) AWS0413
4) AWS0407
5)
6)
7)
8)
9)
DESCRIPTION
QTY
FRAME SUPPORT; LH
FRAME SUPPORT; RH
TOP LINK BRACKET
TOP LINK 11”
UNIVERSAL BRACKET CHANNEL
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” FLANGE HEX SELFTAP
3/8” NC X 1” HEX BOLT
3/8” NC FLANGE HEX NUT
1
1
1
1
1
6
6
8
10
10
10) ONE DRIVE SHAFT AND ONE PTO:
(SEE PTO PAGE FOR DETAILS;#12)
AWS0294
AWS0387
AWS0508
14” SHAFT:
36” SHAFT:
48” SHAFT:
HEADS 21’ OR LESS
HEADS 25’
HEADS 30’
AWS0457
PTO-W 21sp- 1 3/8” (ALL SIZE HEADS)
+ ALL HEADS 25’ AND OVER REQUIRE A BEARING SUPPORT
ASSEMBLY AS SEEN BELOW.
BEARING SUPPORT ASSEMBLY
ITEM #
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
PART #
AWS0240
AWS0242
AWS0003
AWS0001
AWS0420
AWS0249
DESCRIPTION
QTY
PTO GUARD
UNIVERSAL BEARING SUPPORT
BEARING, 1 3/8” WIDERACE
BEARING FLANGE, PF207
BEARING FLANGE, GREASABLE
UNIVERSAL BRACE, ANGLE
3/8” NC X 1 ¼” CARRIAGE BOLT
3/8” NC SER. FLANGE NUT
3/8” NC FLAT WASHERS
3/8” NC X 1” BOLT
1
1
1
1
1
1
3
8
5
2
+ MOUNTING HARDWARE FOR BEARING SUPPORT:
MOUNTING HARDARE WILL BE MADE UP OF EITHER
3/8” NC X 1” SELF TAPPERS AND/OR A COMBINATION
OF 3/8” NC X 1” BOLTS WITH FLANGE NUTS.
37
AGCO DYNAFLEX ATTACHMENT AND DRIVE COMPONENTS
AGCO DYNAFLEX
ITEM #
PART #
1) AWS0413
2) AWS0523
3)
4)
5)
6)
DESCRIPTION
QTY
TOP LINK 11”
TOP LINK BRACKET; DYNAFLEX
M8-1.25 X 20 FORMED HEX SCREW
½” NC X 1” HEX BOLT
½” NC STOVER LOCKNUT
3/8” NC X 1” FLANGE HEX SELFTAP
1
1
2
4
4
6
* DYNAFLEX USES SAME MOUNT ARMS AS AGCO 8200 (HC REEL)
38
AGCO MOUNT ARMS
Left Assembly
Right Assembly
300, 500, 800, 8000 (HC REEL)
(Bill of materials is for both left and right sets)
300, 500, 800, 8000 (U-2 REEL)
(Bill of materials is for both left and right sets)
ITEM #
PART #
1) AWS0108
2) AWS0107
3) AWS0109
4)
5)
6)
7)
DESCRIPTION
QTY
ITEM #
PART #
AGCO/NH MOUNT ARM, RIGHT
AGCO/NH MOUNT ARM, LEFT
ADJUSTING LINK, 11”
STOVERLOCK NUT, 1/2”
BOLT, 3/8” NC X 3/4”
BOLT, 1/2” NC X 3”
BOLT, 1/2” NC X 4”
1
1
2
4
2
2
2
1) AWS0357
2) AWS0356
3) AWS0109
4)
5)
6)
7)
DESCRIPTION
QTY
AGCO/NH U-2 MOUNT ARM, R
AGCO/NH U-2 MOUNT ARM, L
ADJUSTING LINK, 11”
STOVERLOCK NUT, 1/2”
BOLT, 3/8” NC X 3/4”
BOLT, 1/2” NC X 3”
BOLT, 1/2” NC X 4”
1
1
2
4
2
2
2
8200 (HC REEL)
(Bill of materials is for both left and right sets)
8200 (U-2 REEL)
(Bill of materials is for both left and right sets)
ITEM #
PART #
1) AWS0445
2) AWS0109
3)
4)
5)
6)
DESCRIPTION
QTY
ITEM #
AGCO 8200 MOUNT ARM
ADJUSTING LINK, 11”
BOLT, 1/2” NC X 3”
BOLT, 1/2” NC X 3 1/2”
BOLT, 3/8” NC X 3/4”
STOVERLOCK NUT, 1/2”
2
2
2
2
2
4
1) AWS0506
2) AWS0109
3)
4)
5)
6)
Left Assembly
PART #
DESCRIPTION
QTY
AGCO 8200 U-2 MOUNT ARM
ADJUSTING LINK, 11”
BOLT, 1/2” NC X 3”
BOLT, 1/2” NC X 3 1/2”
BOLT, 3/8” NC X 3/4”
STOVERLOCK NUT, 1/2”
2
2
2
2
2
4
Right Assembly
39