S16*– 5,5 - SFS intec

Austenitic stainless steel fasteners for pitched
roofing and cladding applications
3
Austenitic stainless steel self drilling fasteners for steel and
aluminium structure
Technical information
SX , SX – L12
Material:
Fastener:
Washer:
Drill point:
Austenitic stainless steel, grade 304
S = Stainless steel, grade 304
A = Aluminium
with vulcanised EPDM
Case hardened, carbon steel
Application:
Stainless steel fastening of steel or aluminium sheet to steel or aluminium structure
in one operation: drilling, thread forming and sealing.
d
irius®
S
S
12
Underhead drive
KL
L
d
KL
L
8
DI 600
The thinner the purlin or substrate the
greater is the chance of the fastener
stripping its thread during installation.
Purpose designed screwguns and
depth locators are available (Chapter 14).
Washer recommendations:
Please check the recommendations of the
cladding manufacturer
Rooflights
S19 = ∅ 19 mm
S16 = ∅ 16 mm
A32 = ∅ 32 mm
Coloured
fasteners:
Colour heads are
achieved through
powder coating.
(Page 12.2)
3.2
Austenitic stainless steel self drilling fasteners for single skin
construction to steel structure
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SX 3
Effective
thread
length
KL (mm)
Drive
system
irius®
∅ 12 mm
System and tool information
Washer:
Material,
Diameter
Thread
diameter
d (mm)
Overall
length
L (mm)
10– L12– S16*– 5,5×
28
Effective
thread
length
KL (mm)
Coloured
fasteners (Page 12.2)
Security +
Ancillary
components
Chapter 13
* Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights
(Please note effective thread length is reduced by
2 mm with a hexagon head)
Setting tools
and accessories
Chapter 14
DI 600
Application range
SX3/10– L12– S16*– 5,5× 28
VD max.
10
KL max.
VD max.
SX3/15– L12– S16– 5,5×
38
15
VD max.:
3,0 mm
t min. steel 2 x 0,63 mm
1,2 mm
t min. Alu:
SX3/10– S16*– 5,5×
SX3/15– S16*– 5,5x
SX3/20– S16*– 5,5x
28
38
50
2,0 mm
10
15
20
3.3
Austenitic stainless steel self drilling fasteners for general
construction to steel structure
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SX 3
Effective
thread
length
KL (mm)
Drive
system
Washer:
irius®
Material,
∅ 12 mm Diameter
System and tool information
Thread Overall
diameter length
d (mm) L (mm)
20–34– L12– S16*– 5,5×
Effective
thread
length
KL (mm)
Coloured
fasteners (Page 12.2)
52
Security +
Ancillary
components
Chapter 13
* Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights
(Please note effective thread length is reduced by
2 mm with a hexagon head)
Setting tools
and accessories
Chapter 14
DI 600
Application range
SFS
S
KL
SX3/20–34–L12–S16–5,5× 52
20 – 34
VD max.
VD max.:
t min.:
SX3/20–34–S16*–5,5×
SX3/20–44–S16*–5,5×
SX3/20–55–S16*–5,5×
52
65
75
3,0 mm
1,2 mm
20 – 34
20 – 44
20 – 55
3.4
Austenitic stainless steel self drilling fasteners for internal twin skin
construction to steel structure
Example/Order code
Effective
Max. drilling thread
capacity
length
VD (mm)
KL (mm)
Type
SX 3
System and tool information
Washer:
Material,
Diameter
Thread
diameter
d (mm)
Overall
length
L (mm)
/10– S16– 5,5×
28
Security +
Ancillary
components
Chapter 13
Effective
thread
length
KL (mm)
Setting tools
and accessories
Chapter 14
DI 600
Min.-Max.
Application range
Prefix of liner to light section
steel
VD max.
SX3/10 – S16 – 5,5 ×
28
10
VD max.:
3,0 mm
t min. steel: 2 x 0,63 mm
1,2 mm
t min. alu:
2,0 mm
SFS intec grid bracket to light
section steel
t min.
SX3/12– 5,5 ×
28
VD max.
12
VD max.:
3,0 mm
t min. steel: 2 x 0,63 mm
1,2 mm
t min. alu:
Ferrule fastener to light section
steel
2,0 mm
KL
SFS
S
VD max.
SX3/23 – 36 – 5,5 ×
52
23–36
VD max.:
3,0 mm
t min. steel: 2 x 0,63 mm
1,2 mm
t min. alu:
SX3/23 – 44 – 5,5 ×
SX3/23 – 55– 5,5 ×
65
75
2,0 mm
23–44
23–55
3.5
Austenitic stainless steel self drilling fasteners for internal twin skin
construction to steel structure
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SX 14
Effective
thread
length
KL (mm)
Drive
system
irius®
∅ 12 mm
System and tool information
Washer:
Material,
Diameter
Thread Overall
diameter length
d (mm) L (mm)
Security +
Ancillary
components
Chapter 13
Effective
thread
length
KL (mm)
Setting tools
and accessories
Chapter 14
/12– L12– S16*– 5,5× 40
DI 600
Min.-Max.
Application range
VD max.
SX14/12–L12–S16*–5,5× 40
12
VD max.:
14,0 mm
t min. steel: 4,0 mm
t min. alu:
5,0 mm
Prefix of liner to hot rolled
steel
SX14/12–S16–5,5×
40
12
SFS intec grid bracket to light
section steel
t min.
SX14/12–5,5×
SX12/20–5,5×
40
48
14
22
Ferrule fastener to hot rolled
steel
VD max.
VD max.:
14,0 mm
t min. steel: 4,0 mm
t min. alu:
5,0 mm
KL
SFS
S
VD max.
SX14/38–5,5×
SX12/75–
SX12/58–
63
100
84
38
75
58
VD max.:
14,0 mm
t min. steel: 4,0 mm
t min. alu:
5,0 mm
3.6
Austentic stainless steel self drilling fasteners for general construction
to steel structure
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SX 6
Effective
thread
length
KL (mm)
Drive
system
irius®
∅ 12 mm
System and tool information
Washer:
Material,
Diameter
Thread Overall
diameter length
d (mm) L (mm)
Effective
thread
length
KL (mm)
Coloured
fasteners (Page 12.2)
/6– L12– S16*– 5,5× 26
Security +
Ancillary
components
Chapter 13
* Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights
(Please note effective thread length is reduced by
2 mm with a hexagon head)
Setting tools
and accessories
Chapter 14
DI 600
Application range
VD max.
VD max.:
SX6/6–L12–S16*–5,5×
26
6
6,0 mm
VD max.
t min. steel: 2,0 mm
t min. alu: 3,0 mm
SX6/6–S16*–5,5×
26
6
SX6/12–L12–S16*–5,5×
SX6/15 –L12–S16–5,5×
SX6/38–L12–S16–5,5×
SX6/55–L12–S16–5,5×
32
38
58
75
12
15
38
55
SX6/12–S16*–5,5×
SX6/38–S16*–5,5×
SX6/55–S16*–5,5×
32
58
75
12
38
55
VD max.
VD max.:
6,0 mm
t min. steel: 2,0 mm
t min. alu: 3,0 mm
3.7
Austentic stainless steel self drilling fasteners for general construction
to steel structure
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SX 6
Effective
thread
length
KL (mm)
Drive
system
irius®
∅ 12 mm
System and tool information
Washer:
Material,
Diameter
Thread Overall
diameter length
d (mm) L (mm)
Effective
thread
length
KL (mm)
Coloured
fasteners (Page 12.2)
/15– L12– S16*– 5,5× 38
Security +
Ancillary
components
Chapter 13
* Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights
(Please note effective thread length is reduced by
2 mm with a hexagon head)
Setting tools
and accessories
Chapter 14
DI 600
Application range
VD max.
VD max.:
SX6/15–L12–S16*–5,5×
SX6/38–L12–S16*–5,5×
38
58
15
38
SX6/15–S16*–5,5×
SX6/38–S16*–5,5×
38
58
15
38
6,0 mm
t min. steel: 2,0 mm
t min. alu: 3,0 mm
3.8
Austenitic stainless steel self drilling fasteners for general construction
to steel structure
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SX 14
Effective
thread
length
KL (mm)
Drive
system
irius®
∅ 12 mm
System and tool information
Washer:
Material,
Diameter
Thread Overall
diameter length
d (mm) L (mm)
Effective
thread
length
KL (mm)
/12– L12– S16*– 5,5× 40
Coloured
fasteners (Page 12.2)
Security +
Ancillary
components
Chapter 13
* Select washer to suit application eg:
S16 for walls
S19 for roofs
A32 for rooflights
(Please note effective thread length is reduced by
2 mm with a hexagon head)
Setting tools
and accessories
Chapter 14
DI 600
Application range
VD max.
VD max.:
SX14/12–L12–S16*–5,5×
40
14,0 mm
12
t min. steel: 4,0 mm
t min. alu:
5,0 mm
SX14/12–S16*–5,5×
40
12
SX14/120–S16*–5,5×
SX14/136–S16*–5,5×
SX14/158–S16*–5,5×
SX14/173–S16–5,5×
48
63
84
100
20
36
58
73
VD max:
14,0 mm
t min. steel: 4,0 mm
t min. alu:
5,0 mm
3.9
Austenitic stainless steel and aluminium stitching fasteners
Technical information
SXL / SL-S / SL-A
Material:
Fastener:
Washer:
Drill point:
SXL and SL-S: Austenitic stainless steel, grade 304
SL-A: Aluminium
S = Stainless steel, grade 304
A =Aluminium
with vulcanised EPDM
Case hardened, carbon steel
Application:
Stainless steel clamping fasteners for side laps and flashings. The thread-free
zone under the fastener head prevents stripping of the threads in the sheets.
The sheets are pulled together tightly, clamped in the thread-free zone
and sealed. The fasteners can be used without depth stop or torque coupling.
SXL-irius®
d
S
12
L
SL2
d
8
L
3.10
Austenitic stainless steel and aluminium self drilling stitching fasteners
Example/Order code
Type
System and tool information
Material
S=
Drive
Stainless
Max.
steel
Washer:
drilling system
A=
Material,
capacity irius®
VD (mm) ∅ 12 mm Aluminium Diameter
SXL 2– L12–
Coloured
fasteners (Page 12.2)
Thread Overall
diameter length
d (mm) L (mm)
Sheet
thickness
t (mm)
A14– 5,5× 22
Security +
Ancillary
components
Chapter 13
Setting tools
and accessories
Chapter 14
DI 600
Application range
t
SXL2 – L12 – A14 – 5,5 × 22
2 x 0,4
to
2 x 1,0
For steel and aluminium
sheet and flashing
KL
SXL2 – A14 – 5,5 ×
22
2 x 0,4
to
2 x 1,0
SXL2 – L12 – S16 – 6,3 ×
25
2 x 0,4
to
2 x 1,0
SXL2 – S16 – 6,3 ×
25
2 x 0,4
to
2 x 1,0
SLP2– S – A14– 4,8 ×
20
2x0,4
to
2x1,0
3.11
Austenitic stainless steel and aluminium self drilling stitching fasteners
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SL 2–
System and tool information
Material
Washer:
S = Stainless steel Material,
A= Aluminium
Diameter
S–
Thread Overall
diameter length
d (mm) L (mm)
Security +
Ancillary
components
Chapter 13
Sheet
thickness
t (mm)
Setting tools
and accessories
Chapter 14
S14 – 4,8× 22
DI 600
Application range
t
SL2– S– S14– 4,8 ×
Only for steel sheet
and flashing
22
2 x 0,40
to
2 x 1,00
t
SL2– A– A14– 5,5 ×
20
Only for aluminium sheet
and flashing
2 x 0,40
to
2 x 0,90
t
Rooflight to metal sidelap
and tail bolt stitching
t
SX2/18 – A19 – 6,3 ×
Coloured Poppy Red
35
2 x 0,4
to
2 x 0,9
3.12
Austenitic stainless steel self drilling fasteners for timber structure
Technical information
SXW / SXW-L12
Material:
Fastener:
SXW/SW-S:Austenitic stainless steel, grade 304
SW-A: Aluminium
S = Stainless steel, grade 304
A = Aluminium
with vulcanised EPDM
Case hardened, carbon steel
Washer:
Drill point:
Application:
Stainless steel fastening of steel or aluminium sheets to
timber structure.
irius®
d
S
12
L
d
8
L
3.13
Austenitic stainless steel self drilling fasteners for timber structure
Example/Order code
Type
Material:
S= Stainless
steel
A=Aluminium
SXW–
System and tool information
Washer:
Material,
Diameter
Thread Overall
diameter Length
d (mm) L (mm)
Security +
Ancillary
components
Chapter 13
Setting tools
and accessories
Chapter 14
S16*– 6,5× 50
DI 600
* Alternative washer:
Ø S19
VD
SXW – L12 – S16 – 6,5 ×
50
SXW – S16*– 6,5 ×
50
VD: 1 x 0,5 mm
to
2 x 1,0 mm
VD
SXW – L12 – S16 – 5,5 ×
40
SXW – S16*– 5,5 ×
40
VD: 1 x 0,5 mm
to
2 x 1,0 mm
3.14
Architectural profile sheet to aluminium and
steel structure
Architectural profile sheet to aluminium and steel structure
Technical information
SX
Material:
Fastener:
Austenitic stainless steel, grade 304
Sealing washer: Aluminium with vulcanised EPDM
Drill point:
Case hardened, carbon steel
Application:
The SX-L12 self drilling fastener has been specifically developed for
architectural profiled sheets on the cladding. The low profile irius® L12 has a flat
head to enable the fastener head to blend into the cladding colour.
irius®
SX3-L12
d
S
12
L
DI 600
Purpose
designed
lightweight
screwgun
(Chapter 14)
Coloured fasteners
UV resistant dry
powder coating to
match the colour of
the cladding.
(Page 12.2)
3.16
Austenitic stainless steel self drilling fasteners for aluminium
and steel substrate
Example/Order code
Type
Max.
drilling
capacity
VD (mm)
SX 3
Effective
thread
length
KL (mm)
System and tool information
Drive
System
irius®
∅ 12 mm
Washer Thread Overall
Aluminium diameter length
∅ 10 mm d (mm) L (mm)
/10– L12–
A12– 5,5× 28
Security +
Ancillary
components
Chapter 13
Effective
thread
length
KL (mm)
Installation tool
Chapter 14
or DI 600
Application range
Installation tool:
E 420 (Page 14.8)
t
SX3/10–L12–A12–5,5×
SX3–L12–A12–5,5×
28
Steel:
VD max.: 3,0 mm
t min.:
2 x 0,63 mm
1,2 mm
10
Alu:
VD max.: 3,0 mm
t min.:
2,0 mm
VD max.
Installation tool:
E 420 (Page 14.8)
t
SX6/12–L12–A12–5,5×
SX6–L12–A12–5,5×
32
12
Steel:
VD max.:
t min.:
6,0 mm
2,0 mm
Alu:
VD max.:
t min.:
6,0 mm
3,0 mm
VD max.
Installation tool:
E 420 (Page 14.8)
t
SX14/12–L12–A12–5,5×
40
12
Steel:
VD max.: 14,0 mm
t min.:
4,0 mm
Alu:
t min.:
5,0 mm
VD max.
3.17