KESO KEK genie BS

Transcription

KESO KEK genie BS

KESO KEK genie BS
Documentation for EG.707 and EG.708
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Important Notes ....................................................................3
Introduction ............................................................................4
Product description..............................................................4
Applications.............................................................................5
Application Site......................................................................5
KESO KEK genie BS Cylinder Technical Data.................6
KESO KEK genie BS Cylinder Types...................................7
Definitions of KESO KEK Electronics ................................9
Individual Parts and Accessories for EG.707.............. 24
Accessories for EG.086 – EG.088.................................... 30
Accessories for EG.708...................................................... 31
General accessories............................................................ 37
Long Escutcheons without Electronics........................ 38
Security escutcheons ........................................................ 41
Escutcheons.......................................................................... 43
Technical data...................................................................... 44
End of battery life detection............................................ 53
Battery change..................................................................... 54
Pin-out for EG.708 .............................................................. 55
Connection example ......................................................... 59
Installation ............................................................................ 60
KESO KEK Checklist............................................................. 63
KESO KEK Planning Aids.................................................... 64
Maintenance / Care / Repairs .......................................... 66
ESD Rules ............................................................................... 66
Product services .................................................................. 66
Notes....................................................................................... 67
Date of publication:
Version:
25.03.2009
003
ASSA ABLOY is the global leader in door opening solutions.
ASSA ABLOY,
the global leader in
door opening solutions
KESO KEK genie BS
1
Important Notes
KESO AG accepts no liability in case of data loss! The configuration described in the
following must be implemented by an approved Key Solution Center.
KESO AG accepts no claims under warranty and no liability in cases where unauthorised modifications, or improper installation contrary to our assembly instructions is performed or brought
about.
1.1
Conditions for use
This documentation was written for users with good working knowledge of
Windows®. The explanations in this manual also assume that you are familiar with
using Windows®.
Important note:
KESO partners must have completed training for the products in question.
1.2
Important notes on this documentation
This documentation is part of the KESO KEK genie BS product. It contains important information
on its set-up operations and handling. For this reason, you should familiarise yourself with the
content and, in particular, observe the notes on safe installation, handling and operations. Make
sure that this is complied with when passing on this product to third parties. For this reason,
you should keep this documentation in a safe place for future reference!
This documentation is based on information that was correct at time of printing. KESO AG accepts no liability for the correctness and completeness of the content of this documentation.
The figures or graphics shown may differ from the supplied components.
We reserve the right to make changes to reflect technical advancements. The manual
is not covered by our "Update Service".
1.3
Waste disposal
Articles listed in this documentation must not be disposed of as normal household
waste. It is the consumer’s responsibility to dispose of the product at a collection
point for recycling of electrical and electronic waste. Separate disposal of this waste
helps to optimise the recycling of all materials suitable for the recycling process,
and to reduce health and environmental risks. For more information on the correct disposal of
this product, please contact your dealer.
1.4
Safety marks
= Instructions concerning the safety of the user and that serve to avoid damage
to the device.
= Instruction to disconnect the device from the power supply!
= Instructions that you must follow to ensure trouble-free operations!
= Instructions, avoid undue force during assembly.
KESO AG, 03/2009
Subject to change
Page 3 of 68 Pages
KESO KEK genie BS
2
Introduction
The requirement for security, control and high levels of flexibility has increased considerably.
This applies in particular to doors with many or frequently changing users such as: exterior access doors, archives, server rooms etc… An extension of the mechatronic systems is necessary to
fulfil these requirements.
3
Product description
Just like with any other achievements, the wheel of time keeps on turning, producing new inventions and new features. New scientific and technological findings are increasingly linked to
produce synergies, or to compensate for vulnerabilities, and closing and locking technologies
are no exceptions to the rule of change. Purely mechanical closing and locking systems are too
inflexible and expensive for today’s applications for the most part.
The biggest benefit to locking technology that we gain by combining mechanical and electronic
systems, is more flexible locking organization. Flexibility is expressed in the speed with which
required changes can be performed, such as blocking a lost key, or authorizing a new key, etc.
This reduces the risk caused by a lost key to a minimum. The subsequent costs are extremely
low, as you only need to replace one key, rather than the cylinder, or even the whole system.
The KEK genie BS product is your ticket to the world of KESO mechatronic locking systems – a
perfect combination of mechanics and electronics.
3.1
KESO KEK genie BS Function
3.1.1
KESO KEK genie BS Electronic Function
Two characteristics are critical to identifying access authorizations. One the one hand, the mechanical key has to align the pins correctly, and on the other, the storage medium embedded in
the key is read and compared with the electronics. If both characteristics match, the cylinder
can be actuated and the door opened.
When the key is inserted into the cylinder, and the wake-up contact in the electronics is activated, the first step is to check the battery power. Then the electronics read the storage medium embedded in the key, and compare the data content of the key with that of the electronics. In case of a match, the electronics release the cylinder. As a second check, the mechanical
side must also match. Only if both test characteristics are perfect, can the key be turned and the
door opened. Following this, the action is stored on the EEProm where it can be read as an event
at a later time. (event logging only available with PC versions)
Communications between the key with the embedded storage medium and the KESO KEK genie BS cylinder are contactless. The mechanics on the key can be used for other cylinders in the
same system.
3.1.2
Description KESO KEK genie BS locking cylinder
The KESO KEK genie BS cylinder is based on a traditional, mechanical cylinder with 15 drivers on
each locking side. In addition to mechanical locking, the mechatronic side of the KESO KEK genie BS cylinder includes an actuator comprising an antenna, a wake-up mechanisum and a motor that either blocks or releases the rotor. The mechatronic side of the KESO KEK genie BS cylinder is identifiable by the blue antenna cover. A blue connecting cable (L = approx. 230 mm)
with a 6-pin connector extends from the KESO KEK genie BS cylinder. This cable is attached to
the electronics.
KESO AG, 03/2009
Subject to change
Page 4 of 68 Pages
KESO KEK genie BS
3.1.3
Description of Mechanics
The KESO KEK genie BS system is based on mechanical locking with pins and drivers in the cylinder. On top of mechanical locking, there is also electronic locking which adds more flexibility to
mechanical locking. This symbiosis of mechanical and electronic locking only comes into its
own when you consider the locking options that electronics give you. Mechanical locking provides the locking technology underpinnings.
3.1.4
Description of Electromechanics
The electronics module has its own internal power supply. The electronics are activated by a key
sensor when a key is inserted. The electronics start to transmit radio waves via the antenna to
the KESO KEK key. If the key is identified, the electro-motor is switched on to turn the cam
through 90°. This positions the cams horizontally to the stop thus allowing for mechanical unlocking and rotation.
4
Applications
You can fit KESO KEK genie BS cylinders to one or more doors; depending on the application
and the number of keys, you can choose either the PC or Home version.
4.1
Home System Applications
The KESO KEK genie BS Home System is deployed as a stand-alone system for e.g. detached
houses or apartment blocks. Smaller companies often use the system when letting hobby facilities or storage rooms. It is used wherever the owner can easily manage key assignments.
4.2
PC System Applications
The KESO KEK genie BS PC System is also deployed in e.g. detached houses or apartment blocks,
but mainly used by companies where the customer expects a higher level of flexibility. The KESO
K4 software guarantees this flexibility. The KESO KEK Programmer PPG V1, KESO KEK Programmer PPG V2, KESO KEK Programmer USB, or the mutation key, all support targeted programming. KESO KEK genie BS cylinders let you manage up to 8,000 keys and 500 events.
4.3
PC Time System Applications
The KESO KEK genie BS PC Time System is used by larger companies and for more complex
building systems where time plays an important role, such as in public institutions like universities, airports, or hospitals. KESO KEK genie BS PC cylinders let you manage up to 8,000 keys, 500
events and 16 time groups.
5
Application Site
For humid or refrigerated areas, direct exposure to weather conditions, near salt water, or for
applications in aggressive, corrosive environments, electronic subassemblies must be engineered according to particular specifications. This also applies to electronic subassemblies for
use in dusty environments. If needed, take measures to protect the electronic subassembly
against the elements and dust. For use in environments with a particularly high level of electromagnetic interference, custom specifications must be defined for the electronic subassembly.
Customer's specifications must be discussed with us prior to order.
KESO AG, 03/2009
Subject to change
Page 5 of 68 Pages
KESO KEK genie BS
6
KESO KEK genie BS Cylinder Technical Data
Art. No.:
Dimensions:
Operating temperature:
Storage temperature:
Humidity:
Protection type:
Cable length:
VdS Class:
Depending on type and use in KESO System
Basic length 60 mm or 40 mm
- 10°C - + 50° C
- 20°C - + 70° C
10 to 95% (non-condensing)
IP 54
approx. 230 mm
Class B
2
3
1
10
5
4
9
6
7
Pos.
1
2
3
4
5
6
7
8
9
10
KESO AG, 03/2009
8
Description
Cylinder half KESO KEK genie BS
Cylinder half mechanical
Cam DZ
Web
Tensioning pin
Tensioning pin
Actuator KESO KEK genie BS
Cable with connector
KESO KEK genie BS antenna port
Mechanical tumblers
Subject to change
Page 6 of 68 Pages
KESO KEK genie BS
7
KESO KEK genie BS Cylinder Types
7.1
EU – Profile cylinder (web profile ø17 mm)
Excerpt citing the most commonly used KESO KEK genie BS cylinders (non-exhaustive list)
Description
Half cylinders
21.481.
Double cylinder
21.483.
Cylinder with thumb turn
21.485.
Graphic illustration
Sleeve material: Sidra
Web material: CrNi
Basic length:
40 mm
Extensible:
in 5 mm steps
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Cylinder with thumb turn for
KESO MOZY eco
21.40T.
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Dual cylinder with
electronics both sides
21.40U.
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm
steps
Dual cylinder with
Freewheeling cams
21.41C.
Web material: CrNi
Basic length:
70 mm
Extensible:
in 5 mm steps
Dual cylinder with
Priority function
21.41B
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
* Dual cylinder with
contact pin on elec. side
21.41M.
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Dual cylinder with
dummy interior side
21.40V
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
*
KESO AG, 03/2009
The use of contact pin cylinders is restricted with existing master key systems. Depending on
locking system permutations, it may be impossible to use a contact pin cylinder.
Subject to change
Page 7 of 68 Pages
KESO KEK genie BS
7.2
EuroSwiss – Profile cylinder (web profile ø22 mm)
Excerpt citing the most commonly used KESO KEK genie BS cylinders (non-exhaustive list)
Description
Half cylinders
11.581.
21.581.
31.581.
Double cylinder
11.583.
21.583.
31.583.
Cylinder with thumb turn
11.585.
21.585.
31.585.
Graphic illustration
Web material: CrNi
Basic length:
40 mm
Extensible:
in 5 mm steps
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Dual cylinder with
electronics both sides
11.50U.
21.50U.
31.50U.
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Cylinder with thumb turn for
KESO MOZY eco
11.50T.
21.50T.
31.50T.
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Dual cylinder with
Freewheeling cams
11.51C.
21.51C.
31.51C.
Web material: CrNi
Basic length:
70 mm
Extensible:
in 5 mm steps
contact pin on elec. side
11.50Y.
21.50Y.
31.50Y.
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Contact pin on mech. side
11.51M.
21.51M.
31.51M.
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
Dual cylinder with
dummy interior side
11.50V
21.50V
31.50V
Web material: CrNi
Basic length:
60 mm
Extensible:
in 5 mm steps
*
KESO AG, 03/2009
The use of contact pin cylinders is restricted with existing master key systems. Depending on
locking system permutations, it may be impossible to use a contact pin cylinder.
Subject to change
Page 8 of 68 Pages
KESO KEK genie BS
8
Definitions of KESO KEK Electronics
8.1
Dimensional Sketch Electronics Module EG.707
Dimensions:
Material:
Colour:
KESO AG, 03/2009
118 x 38 x 14.6 mm
Plastic PA 6, antistatic
black
Subject to change
Page 9 of 68 Pages
KESO KEK genie BS
8.2
Electronics in Face Plate – Battery Version EG.707
Extending the KESO KEK genie BS range to include a new face plate variant for hidden installation.
The communications connector in the face plate is protected by a
corresponding cover.
The face plate housing comprises antistatic plastic mounted using the two
M4 screws and the stretching thread inserts.
8.2.1
Dimensional Sketch EG 707
KESO AG, 03/2009
Subject to change
Page 10 of 68 Pages
KESO KEK genie BS
___
__
___
02
Cable length
Reader aperture
EG.707
Face plate type
Definition Article Numbers EG.707
Electronics
8.2.2
Types
Home, Mains
OHB
PC, Mains
OPB
PC, Time, Mains
PTB
Electronics only
00
Face plate short (150mm)
01
Face plate long (210mm)
02
Without
00
Cable length 200 mm
10
Cable length 600 mm
01
Cable length 1,200 mm
02
03
Reader aperture
KESO AG, 03/2009
02
Subject to change
Page 11 of 68 Pages
KESO KEK genie BS
8.3
Electronics in Fitting – Battery Version EG.707
KESO KEK genie BS is now even more attractive thanks to the availability of electronics in the fitting.
Visible installation on the inside of the door above the KESO KEK genie BS
cylinder offers many advantages, such as e.g. direct mounting of security
escutcheons with the new fitting type.
Fitting covers are available in various versions, Euro profile, EuroSwiss
profile and dummy. The cover is secured by means of a screw.
The communications connector in the face plate is protected by a
corresponding cover.
8.3.1
Dimensional Sketch EG 707
KESO AG, 03/2009
Subject to change
Page 12 of 68 Pages
KESO KEK genie BS
___
__
___
02
__
__
Cable length
Reader aperture
Cylinder cut-out fitting
Color fitting
EG.707
Fitting type
Electronics
8.3.2
Types
Home, Mains
OHB
PC, Mains
OPB
PC, Time, Mains
PTB
Without fitting cover
00
Narrow fitting
03
Wide fitting
04
Without
00
Cable length 200 mm
10
Cable length 600 mm
01
02
03
Reader aperture
02
Dummy
00
EU Profile (17 mm)
01
CH Profile (22 mm)
04
Nickel plated
02
Chrome plated matt
(01)
03
Gold décor
04
Graphite black
92
KESO AG, 03/2009
Subject to change
Page 13 of 68 Pages
KESO KEK genie BS
8.4
Stainless Steel Long-Escutcheon Type Security Fitting EG.086
The stainless steel security escutcheon with integrated KESO KEK electronics is a tried-andtrusted security product characterized by a successful combination of excellent security and
timeless, elegant design.
The external fascia can be fitted with a handle or a fixed thumb turn.
The zinc die cast base plate and hardened drill-open protection
plate are invisibly screw-connected to the stainless steel cover.
The internal fascia comprises a galvanized steel base plate with
screwed through connection, 2 x M8, and the stainless steel cover
clipped on.
The stainless steel security cover G.086 is designed to house the
optional electronics. The electronics are safely located under the
internal fascia.
Power is provided by a battery pack, which is also located below the
internal fascia. The clip-on internal fascia allows for easy
replacement of the battery pack.
DIN 18257 – ES 1 – L – ZA approved
8.4.1
Dimensional Sketch EG.086
Handle 5062
Handle 5064
Thumb turn 5827/53
(ø 53 mm)
Thumb turn 5830
(ø 60 mm eccentric)
right-hand mounted
(convertible to left-handed)
KESO AG, 03/2009
Subject to change
Page 14 of 68 Pages
KESO KEK genie BS
__
___
2
Moisture protection
_
Electronics
__
4 kt.
_
door leaf thickness
_
Hole spacing distance
__
Surface Chrome Nickel
Steel / Color
EG.086
Cylinder cut-out
External handle
Internal handle
8.4.2
Types
Handle 5062
_1_
Handle 5064
_2_
Thumb turn 5827/53
3_
Thumb turn 5830
4_
EU Profile ø 17 mm
1
EuroSwiss ø 22 mm
4
matt brushed
1
polished
2
70 mm*
(1)
70*
72 mm
(1)
72
74 mm
(4)
74
78 mm
(1) & (4)
78
85 mm
(1)
85
88 mm
(1)
88
90 mm
(4)
90
92 mm
(1)
92
94 mm
(4)
94
38 – 48 mm
1
48 – 58 mm
2
58 – 68 mm
3
68 – 78 mm
4
78 – 88 mm
5
7 mm
70
8 mm
80
8.5 mm
85
9 mm
90
Without electronics
000
PC Battery
0PB
PC Time Battery
PTB
Home Battery
0HB
with moisture protection
2
Notes on cylinder definitions
- The cylinder projection relative to the external fascia must be no more than 3 mm. / All handles are rotatable, fixed mounting.
* on request
KESO AG, 03/2009
Subject to change
Page 15 of 68 Pages
KESO KEK genie BS
8.5
Stainless Steel Long-Escutcheon Type EG.087
The solid external fascia can be fitted with a handle or a fixed
thumb turn. The cylinder is protected by a solid stainless steel
cylinder guard and a hardened bronze protection plate.
The internal fascia comprises a galvanized steel base plate with
screwed through connection, 2 x M8 and 1 x M6, and the stainless
steel cover clipped on.
The stainless steel security cover G.087 is designed to house the
optional electronics. The electronics, with which the KESO KEK
genie BS cylinder can communicate via a plugged connection, are
located safely under the internal fascia.
Power is provided by a battery pack, which is also located below
the internal fascia. The clip-on internal fascia allows for easy replacement of the battery pack.
8.5.1
Dimensional sketch
Handle 5062
Handle 5064
Thumb turn 5827/53
(ø 53 mm)
Thumb turn 5830
right-hand mounted
KESO AG, 03/2009
Subject to change
Page 16 of 68 Pages
KESO KEK genie BS
__
___
2
Moisture protection
_
Electronics
__
4 kt.
_
door leaf thickness
_
__
Steel / Color
EG.087
Cylinder cut-out
External handle
Internal handle
8.5.2
Types
Handle 5062
_1_
Handle 5064
_2_
Thumb turn 5827/53
3_
Thumb turn 5830
4_
EU Profile ø 17 mm
1
EuroSwiss ø 22 mm
4
matt brushed
1
polished
2
70 mm*
(1)
70*
72 mm
(1)
72
74 mm
(4)
74
78 mm
(1) & (4)
78
85 mm
(1)
85
88 mm
(1)
88
90 mm
(4)
90
92 mm
(1)
92
94 mm
(4)
94
38 – 48 mm
1
48 – 58 mm
2
58 – 68 mm
3
68 – 78 mm
4
78 – 88 mm
5
7 mm
70
8 mm
80
8.5 mm
85
9 mm
90
Without electronics
000
PC Battery
0PB
PC Time Battery
PTB
Home Battery
0HB
2
- The cylinder projection on the outer side, measured from the door leaf, must be between 7
and 12 mm. / All handles are rotatable, fixed mounting.
* on request
KESO AG, 03/2009
Subject to change
Page 17 of 68 Pages
KESO KEK genie BS
8.6
Stainless Steel Long-Escutcheon Type EG.088
The solid external fascia can be fitting with a handle or a
fixed thumb turn. The cylinder is protected by a solid
stainless steel cylinder guard and a hardened drill protection
plate. A hardened drill protection plate that covers the
whole external fascia area is worked into the underside of
the exterior fascia.
The internal fascia comprises a galvanized steel base plate
with screwed through connection, 2 x M8 and 1 x M6, and
the stainless steel cover clipped on.
The stainless steel security cover G0.088 is designed to
house the optional electronics.
The electronics, with which the KESO KEK genie BS cylinder
can communicate via a plugged connection, are located
safely under the internal fascia.
Power is provided by a battery pack, which is also located
below the internal fascia. The clip-on internal fascia allows
for easy replacement of the battery pack.
8.6.1
Griff 5062
Handle 5064
Thumb turn 5827/53
(ø 53 mm)
Thumb turn 5830
right-hand mounted
KESO AG, 03/2009
Subject to change
Page 18 of 68 Pages
KESO KEK genie BS
__
___
2
Moisture protection
_
Electronics
__
4 kt.
_
door leaf thickness
_
__
Steel / Color
EG.088
Cylinder cut-out
External handle
Internal handle
8.6.2
Types
Handle 5062
_1_
Handle 5064
_2_
Thumb turn 5827/53
3_
Thumb turn 5830
4_
EU Profile ø 17 mm
1
EuroSwiss ø 22 mm
4
matt brushed
1
polished
2
70 mm*
(1)
70*
72 mm
(1)
72
74 mm
(4)
74
78 mm
(1) & (4)
78
85 mm
(1)
85
88 mm
(1)
88
90 mm
(4)
90
92 mm
(1)
92
94 mm
(4)
94
38 – 48 mm
1
48 – 58 mm
2
58 – 68 mm
3
68 – 78 mm
4
78 – 88 mm
5
7 mm
70
8 mm
80
8.5 mm
85
9 mm
90
Without electronics
000
PC Battery
0PB
PC Time Battery
PTB
Home Battery
0HB
2
- The cylinder projection on the outer side, measured from the door leaf, must be between 7
and 12 mm. / All handles are rotatable, fixed mounting.
* on request
KESO AG, 03/2009
Subject to change
Page 19 of 68 Pages
KESO KEK genie BS
8.7
Long Escutcheon Fitting EG.089
The security long escutcheon with integrated KESO KEK electronics is a tried-and-trusted security product, characterized by a timeless, elegant design.
The external fascia can be fitting with a handle or a fixed thumb turn.
The internal fascia comprises a nickel plated zinc die cast shell which
is connected to the internal fascia by means of three M6 screws.
The electronics, with which the KESO KEK genie BS cylinder can
communicate via a plugged connection, are located safely under the
internal fascia.
Power is provided by a battery pack, which is also located below the
internal fascia.
8.7.1
Handle
KESO AG, 03/2009
Thumb turn
(ø 45 mm)
Subject to change
Page 20 of 68 Pages
KESO KEK genie BS
__
___
2
Moisture protection
__
Electronics
_
Deployment height
__
4 kt.
_
door leaf thickness
_
__
Steel / Color
EG.089
Cylinder cut-out
External handle
Internal handle
8.7.2
Types
Handle
1_
Thumb turn
3_
EU Profile ø 17 mm
1
EuroSwiss ø 22 mm
matt brushed,
plated
4
nickel
1
Polished, chrome plated
2
70 mm*
(1)
70*
72 mm
(1)
72
74 mm*
(1) & (4)
74*
78 mm
(1) & (4)
78
35 – 40 mm
1
40 – 45 mm
2
45 – 50 mm
3
50 – 55 mm
4
55 – 60 mm
5
60 – 65 mm
6
65 – 70 mm
7
70 – 75 mm
8
75 – 80 mm
9
8 mm
80
9 mm
90
8 mm*
08*
10 mm
10
12 mm
12
14 mm
14
Without electronics
000
PC Battery
0PB
PC Time Battery
PTB
Home Battery
0HB
2
* Only for long escutcheons without inserts.
KESO AG, 03/2009
Subject to change
Page 21 of 68 Pages
KESO KEK genie BS
8.8
Electronics – Mains VersionEG.708
KESO KEK genie BS is now even more attractive thanks to the availability of electronics for
12-24V.
The face plate housing comprises antistatic plastic mounted using the
two M4 screws and the stretching thread inserts.
The electronics can be installed in the face plate, surface mounted, via a
top-hat rail, or using the practical terminal box.
One of many advantages is that the mains version can use 12V or
24 volts and can control a variety of devices thanks to the integrated relay.
The mains version can also be networked with KESO KEK net.
8.8.1
Dimensional Sketch for Electronics EG.708
118 x 38 x 14.6 mm
5 pcs. With rated break point
20
38
KESO AG, 03/2009
20
1.7
14.6
Dimensions:
Fixing lugs:
Subject to change
Page 22 of 68 Pages
KESO KEK genie BS
___
__
02
01
__
Reader aperture
Application
Extension cable
EG.708
Type
Electronics
8.8.2
Types
PC, Mains
OPS
PC, Time, Mains
PTS
Without face plate
00
Face plate short (150mm)
01
Face plate long (210mm)
02
DIN rack-mount case
05
Surface mounted case G.546
06
For terminal box
07
Reader aperture
02
For use with cylinder
01
Without extension cable
00
0.2 m extension cable
10
01
02
03
09
15
KESO AG, 03/2009
Subject to change
Page 23 of 68 Pages
KESO KEK genie BS
9
Individual Parts and Accessories for EG.707
9.1
Fitting 40 mm dummy
Article No.:
Dimensions:
Material:
Color:
Mounting:
9.2
Fitting EU Profile (40 mm)
Article No.:
Dimensions:
Material:
Color:
Mounting:
9.3
G.705/../../..
127 x 41.4 x 18.5 mm
Plastic antistatic PA 6
nickel plated, gold decor, black
1x grub screw M3x10 mm
G.705/../../..
127 x 41.4 x 18.5 mm
Nickel plated, chrome plate matt,
gold decor, black
Fitting EuroSwiss Profile 40 mm
Article No.:
Dimensions:
Material:
Color:
Mounting:
KESO AG, 03/2009
G.705/../../..
127 x 41.4 x 18.5 mm
Subject to change
Page 24 of 68 Pages
KESO KEK genie BS
9.4
Fitting 55 mm dummy
Article No.:
Dimensions:
Material:
Color:
Mounting:
9.5
Fitting EU Profile (55 mm)
Article No.:
Dimensions:
Material:
Color:
Mounting:
9.6
G0.706/../../..
127 x 55 x 18.5 mm
G0.706/../../..
127 x 55 x 18.5 mm
Nickel plated, chrome plate matt,
gold decor, black
Fitting EuroSwiss Profile 55 mm
Article No.:
Dimensions:
Material:
Color:
Mounting:
KESO AG, 03/2009
G0.706/../../..
127 x 55 x 18.5 mm
Subject to change
Page 25 of 68 Pages
KESO KEK genie BS
9.7
Short Face Plate for Electronics EG.707 & EG.708
Article No.:
Material:
Color:
Mounting:
Drill hole:
9.7.1
G.704/150/02
black
2 cylinder screws Torx M4x12 mm
2 stretching thread inserts M4x10
For wood and soft plastics
Drill hole depth min. 15 mm, Ø 5.5 mm
For threaded inserts
Dimensional Sketch Short Face Plate
170 x 20 x 41 mm
41
Dimensions:
9.8
Long Face Plate for EG.707 & EG.708
Article No.:
Material:
Color:
Mounting:
Drill hole:
9.8.1
G.704/210/02
black
Dimensional Sketch Long Face Plate
230 x 20 x 41 mm
41
Dimensions:
KESO AG, 03/2009
Subject to change
Page 26 of 68 Pages
KESO KEK genie BS
9.9
Damp Casing IP54
Damp casing for EG.707 electronics when fitting the damp casing, note that it is always located
above the cylinder.
Article No.:
Material:
Size:
9.10
V.001/41/38
Anodized aluminum
150x46x19 mm
Exterior Case - Metal
Used with KESO face plate housing and for all third-party products with same dimensions. The
cover on the external housing is made of CNS, polished, and has a material thickness of 1.5 mm.
The base plate is made of aluminum and 3 mm thick. The screw connections at the front use
torx grub screws. (Type TX 20)
Article No.:
Cover material:
Material thickness:
Cover connection type:
G0.546
CNS polished
1.5 mm
2 pcs. Torx TX20
9.10.1 Dimensional Sketch External Housing
Dimensions:
KESO AG, 03/2009
262.97 x 54 x 25.5 mm
Subject to change
Page 27 of 68 Pages
KESO KEK genie BS
9.11
Small Metal Housing
Article No.:
Cover material:
Material thickness:
Size:
G0.412
CNS polished
2 mm
2 pcs. Torx TX20
143 x 45 x 27 mm (LxWxH)
9.12
EuroSwiss Profile Base Plate 40 mm
Article No.:
Area of application:
Dimensions:
Material:
9.13
G.141/40/01
G.141/40/02 with adhesive foil
for fire-prevention doors
127 x 41.4 x 5 mm
1.4305 (X12CrNiS 18 8)
EuroSwiss Profile Base Plate 55 mm
Article No.:
Area of application:
Dimensions:
Material:
KESO AG, 03/2009
G.141/55/01
G.141/55/02 with adhesive foil
for fire-prevention doors
127 x 55 x 5 mm
1.4305 (X12CrNiS 18 8)
Subject to change
Page 28 of 68 Pages
KESO KEK genie BS
9.14
Adhesive Foil for Base Plate 40/55 mm
Article No.:
V.001/54/24
Quantity:
2 pieces
Type:
double-sided adhesive cloth tape
Dimensions:
38 x 27.5 x 1 mm
Material:
Scotch 3M
IMPORTANT:
Subsurface must be dust and grease-free
Adhesive
tape
9.15
Battery
Article No.:
Packing unit:
Type:
Voltage:
9.16
Cover Plug for Fitting 55 mm
Article No.:
Material:
Color:
9.17
G0.701
Santoprene
black
Cover Plug for Face Plate Cover and Fitting 40 mm
Article No.:
Material:
Color:
9.18
V.000/21/16
10 pcs.
Alkali manganese cells LR1
1.5 volts
G0.700
Santoprene
black
Adapter Sleeve Eccentric
Article No.:
Material:
Color:
Note:
KESO AG, 03/2009
G0.702
Antistatic plastic PA6
black
reduction of cylinder aperture from
EuroSwiss profile to EU profile
Subject to change
Page 29 of 68 Pages
KESO KEK genie BS
9.19
Grub Screw for Fitting 40 mm / 55 mm
Article No.:
Packing unit:
Size:
9.20
Upper Housing Part for EG.707
Article No.:
9.21
V.000/33/37
50 pcs.
M3x10 mm
175.093.0001
Lower Housing Part for EG.707
Article No.:
175.092.0001
10
Accessories for EG.086 – EG.088
10.1
Installation Template for Fittings
Art. No.:
Dimensions:
Description:
10.2
V.000/13/54
239 x 75 x 39 mm (L x W x H)
Steel installation template with
hardened drill inserts
Energy Pack (Batteries)
Art. No.:
G0.405
Dimensions:
46 x 32 x 11 mm (L x W x H)
Type:
AAA, alkali manganese cells
Voltage:
4.5 Volt ( 3 X 1.5 Volt)
Capacity:
Minimum 1200 mAh
Cable length:
60 mm with reverse polarity protected plug
Service life:
approx. 2 years
- 10°C to + 50°C
10.3
Battery blister for energy pack G.405
Art. No.:
V.000/39/77
10.4
Electronics PCB for Battery Operations
Home Version
Article No.:
EK.015.0006
PC Version
Article No.:
EK.015.0007
PC Time Version
Article No.:
EK.015.0008
KESO AG, 03/2009
Subject to change
Page 30 of 68 Pages
KESO KEK genie BS
10.5
PCB Holder for EK.015.000x
Article No.:
Dimensions:
11
Accessories for EG.708
11.1
Adapter PCB for EG.708
Article No.:
Dimensions:
Application area:
Material PCB holder:
Cable for peripherals:
Cable for RS-485:
Cable length:
Note:
11.2
V.001/54/26
31 x 26 x 3 mm
K.023
31 x 26 x 14 mm
Electronics Layout V1.4; V1.5
Polyamide 66
1 pcs. 10-pin
1 pcs. 7-pin
120 mm
The adapter PCB is clipped onto a PCB
holder using double-sided adhesive
tape
Short Face Plate for Electronics EG.707 & EG.708
Article No.:
Material:
Color:
Mounting:
Drill hole:
G.704/150/02
black
11.2.1 Dimensional Sketch Short Face Plate
170 x 20 x 41 mm
41
Dimensions:
KESO AG, 03/2009
Subject to change
Page 31 of 68 Pages
KESO KEK genie BS
11.3
Long Face Plate for EG.707 & EG.708
Article No.:
Material:
Color:
Mounting:
Drill hole:
G.704/210/02
black
11.3.1 Dimensional Sketch Long Face Plate
230 x 20 x 41 mm
41
Dimensions:
11.4
Cover Plug for Face Plate Cover and Fitting 40 mm
Article No.:
Material:
Color:
KESO AG, 03/2009
G0.700
Santoprene
black
Subject to change
Page 32 of 68 Pages
KESO KEK genie BS
11.5
Exterior Case - Metal
Used with KESO face plate housing and for all third-party products with same dimensions. The
cover on the external housing is made of CNS, polished, and has a material thickness of 1.5 mm.
The base plate is made of aluminum and 3 mm thick. The screw connections at the front use
torx grub screws. (Type TX 20)
Article No.:
Cover material:
Material thickness:
G0.546
CNS polished
1.5 mm
2 pcs. Torx TX20
Dimensions:
11.6
262.97 x 54 x 25.5 mm
Small Metal Housing
Article No.:
Cover material:
Material thickness:
Size:
G0.412
CNS polished
2 mm
2 pcs. Torx TX20
143 x 45 x 27 mm (LxWxH)
KESO AG, 03/2009
Subject to change
Page 33 of 68 Pages
KESO KEK genie BS
11.7
DIN Rail Holder for Electronics EG.708
Article No.:
Material:
Color:
Mounting:
G0.411
Polyamide 66
turquoise
Suitable for DIN 15;
DIN 32 and DIN 35 mounting rails
11.7.1 Dimensional Sketch DIN Rail Holder
Dimensions:
11.8
137 x 45 x 28 mm (L x W x H)
Replacement Base Plate for EG.708 Plastic Housing
Article No.:
Material:
Color:
KESO AG, 03/2009
175.093.0002
Polyamide 66
black
Subject to change
Page 34 of 68 Pages
KESO KEK genie BS
__
__
_
__
__
Prepared for
KESO electronics
Prepared for
KESO KEK net Access
Drive control unit
-{}-
__
Power supply
17.015
Relay
KESO KEK Terminal Box
Connection box with
basic materials
11.9
Types
Plastic 325x275x120 Landscape format
01
Plastic 325x275x120 Portrait
format
02
Plastic portrait format
275x225x80 *1
03
Steel sheet
300x300x150 *1
04
Steel sheet with cylinder
perforation 300x300x150 *1
05
12 V relay
01
24 V relay
02
Without power supply
00
Power supply
12V/4.0A/48W
01
Power supply
24V/5.0A/120W
Power supply
24V/2.5A/60W
02
03
Not prepared for
KESO electronics
00
Prepared for
KESO electronics
01
Not prepared for
KESO KEK net Access
00
Prepared for
KESO KEK net Access
01
Without drie control unit
EA420
00
Drive control unit EA420
01
*1 only available without drive control unit
*2 Prepared for locking cylinder 13.031… / 23.031… / 31.031…
with flat bolt A3 (E.275 A3)
KESO AG, 03/2009
Subject to change
Page 35 of 68 Pages
KESO KEK genie BS
11.10
KESO KEK Emergency Power Supply
The KESO KEK emergency power supply is connected to the mains power supply. If the mains
power drops off, the internal relay is switched and the power supply is ensured for approx. 24
hours * via the battery.
* Important note:
This time value is approximate; depending on the power consumption and the use
of connected devices, battery power can last longer or be exhausted more quickly!
Emergency power supply box 12 V
Article No.:
V.001/54/44
Emergency power supply box 24 V
Article No.:
V.001/54/45
KESO AG, 03/2009
Subject to change
Page 36 of 68 Pages
KESO KEK genie BS
12
General accessories
12.1
Extension Cable for KESO KEK genie BS cylinder
Article No.:
Article No.:
Article No.:
Article No.:
Wires:
Diameter:
Cable end:
tected
12.2
Connector for Extension Cable
Art. #:
Material:
Color:
12.3
12.4
K.500/02 Æ
0.2 m
K.500/06 Æ
0.6 m
K.500/12 Æ
1.2 m
K.500/20 Æ
2.0 m
AWG 30 OR 7x102 mm²
Partially twisted pair unshielded
5 mm
Connectors crimped on to both ends, reverse-polarity pro-
Key switch flush-mounted
Art. no.:
Description:
V.000/54/67
white
V.000/53/68
2-sided non-locking, EuroSwiss profile
without cylinder and electronics
Art. no.:
Description:
V.000/53/69
Art. no.:
Description:
V.000/53/70
Locking, EuroSwiss profile
Key switch surface mounted
Art. no.:
Description:
V.000/53/71
Art. no.:
Description:
V.000/53/72
Art. no.:
Description:
V.000/53/70
Locking, EuroSwiss profile
KESO AG, 03/2009
Subject to change
Page 37 of 68 Pages
KESO KEK genie BS
13
Long Escutcheons without Electronics
13.1
Long escutcheon fitting G.043/..
Long escutcheon for KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm
Material stainless steel, matt brushed. Version for wooden and metal doors.
Dimensions:
Length:
Width:
Height:
Handle guide:
235 mm
40 mm
2 mm
16 mm
21 mm
__
Distance
71 mm
84,5 mm
G0.043
78
137 mm
74
Distance 78 mm
78 mm
Distance 74 mm
235 mm
Types
40 mm
KESO AG, 03/2009
Subject to change
Page 38 of 68 Pages
KESO KEK genie BS
13.2
Long escutcheon fitting long type G.043/../L
Long escutcheon fitting long type for KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm
Dimensions:
Length:
Width:
Height:
Handle guide: 16 mm
__
L
Distance
Length
G0.043
258 mm
40 mm
2 mm
Types
Distance 74 mm
74
Distance 78 mm
78
Length
KESO AG, 03/2009
L
Subject to change
Page 39 of 68 Pages
KESO KEK genie BS
13.3
Long escutcheon fitting long type with drill hole G.043/../LB
Long escutcheon fitting long type KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm, with additional drill holes (M3) for attaching the EG.707 electronics.
Dimensions:
Length:
Width:
Height:
Handle guide:
__
L
W
Distance
Length
Drill hole
G0.043
258 mm
40 mm
2 mm
16 mm
Types
Distance 74 mm
74
Distance 78 mm
78
Length
Drill hole
KESO AG, 03/2009
L
W
Subject to change
Page 40 of 68 Pages
KESO KEK genie BS
14
Security escutcheons
14.1
Security escutcheon round G.025
For KESO KEK genie BS – EuroSwiss cylinder Ø 17 mm Round type for wooden and metal doors.
Material chrome
plated nickel steel
__
Height A
G0.025
Types
14.2
2 mm
02
4 mm
04
6 mm
06
8 mm
08
10 mm
10
12 mm
12
14 mm
14
16 mm
16
18 mm
18
20 mm
20
Security escutcheon oval G.026
For KESO KEK genie BS – EuroSwiss cylinder Ø 17 mm Oval version for wooden and metal doors.
Material chrome
plated nickel steel
__
Height A
G0.026
Types
2 mm
02
4 mm
04
6 mm
06
8 mm
08
10 mm
10
12 mm
12
14 mm
14
16 mm
16
18 mm
18
20 mm
20
KESO AG, 03/2009
Subject to change
Page 41 of 68 Pages
KESO KEK genie BS
14.3
Security escutcheon oval G0.039
For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Oval version for wooden and metal doors.
Material chrome
plated nickel steel
__
Height A
G0.039
Types
14.4
2 mm
02
4 mm
04
6 mm
06
8 mm
08
10 mm
10
12 mm
12
14 mm
14
16 mm
16
Security escutcheon round G0.040
For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Round type for wooden and metal doors.
Material chrome
plated nickel steel
__
Height A
G0.039
Types
2 mm
02
4 mm
04
6 mm
06
8 mm
08
10 mm
10
12 mm
12
14 mm
14
16 mm
16
KESO AG, 03/2009
Subject to change
Page 42 of 68 Pages
KESO KEK genie BS
15
Escutcheons
15.1
Flat escutcheon round G.008
For KESO KEK genie BS – Euro profile cylinder Ø 17 mm
Oval version for wooden and metal doors. Material chrome plated nickel steel.
15.2
Flat escutcheon oval G.009
For KESO KEK genie BS – Euro profile cylinder Ø 17 mm
Round type for wooden and metal doors. Material chrome plated nickel steel.
15.3
Flat escutcheon oval G0.041
For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm
Oval version for wooden and metal doors. Material chrome plated nickel steel.
15.4
Flat escutcheon round G0.042
For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm
Round type for wooden and metal doors. Material chrome plated nickel steel.
KESO AG, 03/2009
Subject to change
Page 43 of 68 Pages
KESO KEK genie BS
16
Technical data
16.1
General Details for KESO KEK Electronics Battery Version EG.707
Power supply:
Battery type:
Input voltage:
Battery life:
Data security:
Battery change:
Reader method:
Data storage:
Temperature and humidity:
Mechanical stress:
ESD/EMC
Application type:
Protection rating:
Humidity:
Dimensions:
Battery operations 3 alkali manganese cells in series
LR1
2.7 to 5.5V DC
Approx. 40,000 openings or approx. 2 years
All data are stored in a non-volatile
memory
Changing the batteries
automatically resets
the end of battery life detector
contactless (RFID)
EEPROM
IEC 68-2-1/2/3/14
IEC 68-2-6/27
EN61000-6-2/3
Stand alone
IP50
-20 to +70°C
-40 to +90°C
118x38x14.6mm (LxWxH)
16.1.1 HOME Version EG.707
Article No.:
Reaction time:
Management:
Programming unit:
Programming interface:
User keys:
EG.707/0HB/00/00
70ms
Manual or via programmer/delete key
Master, programming and delete key
RF and serial
256 per electronics unit
16.1.2 PC Version EG.707
Article No.:
Reaction time:
Event logging:
Operating modes:
Management:
Programming unit:
User keys:
KESO AG, 03/2009
EG.707/0PB /00/00
140ms
500 events (FIFO) with
door designation, person,
action
Always open
via KESO K4 Software
KESO KEK programmer USB
KESO KEK programmer PPG V1
RF and serial
8,000 per electronics unit
Subject to change
Page 44 of 68 Pages
KESO KEK genie BS
16.1.3 PC TIME Version EG.707
Article No.:
Reaction time:
Clock precision:
Clock resolution:
Clock power reserve:
Time slot:
Special days:
Event logging:
Operating modes:
Management:
Programming unit:
User keys:
KESO AG, 03/2009
EG.707/PTB/00/00
140ms
+/- 3s per day
1 min
at least 90s
16 (24 hours plus 15 freely programmable)
comprising 4 time blocks
3 time blocks, works holidays, holidays, public holidays
500 events (FIFO) with date, time,
door designation, person, action
Always open / time slot
KESO KEK programmer USB
RF and serial
8,000 per electronics unit
Subject to change
Page 45 of 68 Pages
KESO KEK genie BS
16.2
General Details for KESO KEK Electronics Mains Version EG.708
Material:
Color:
Power supply:
Input voltage:
Peak current:
Ripple:
Relay output:
Fall in (FET output)
Data security:
Reader method:
Reaction time:
Data storage:
Temperature and humidity:
Mechanical stress:
ESD/EMC
Application type:
Protection rating:
Humidity:
Dimensions:
Management:
Programming:
User keys:
Output to cylinder:
Input RS-485:
Polyamide 66
black
external
12/24VDC
at 12V Æ max. 200mA
at 24V Æ max. 120mA
200/400 mV PP
Imax=2A; Umax=30V;
for resistive load
Imax=100mA; Umax=30V;
not electrically isolated (open drain)
all data are stored in a
non-volatile memory
contactless (RFID)
140ms
EEPROM
IEC 68-2-1/2/3/14
IEC 68-2-6/27
EN61000-6-2/3
network connected or stand-alone
IP50
-20 to +70°C
-40 to +90°C
Electronics 118x38x14.6 mm (LxWxH)
online via Ethernet with KESO K4 Software &
KESO KEK net Access
KESO programmer USB
KESO programmer PPG V1
KESO programmer PPG V2
8,000 per KESO KEK net electronics unit
Ethernet and serial, RF up to a cable length of 2m
max. 6 m, configurable using dip switches
max. 100 m to KESO KEK net Access
16.2.1 PC Version EG.708
Article No.:
Event logging:
Operating modes:
EG.708/OPS/00/00
500 events (First in Last out) with
Always open
16.2.2 Electronics - PC TIME Version EG.708
Article No.:
Clock precision:
Clock resolution:
Clock power reserve
Time slot:
Special days:
Event logging:
Operating modes:
KESO AG, 03/2009
EG.708/PTS/00/00
+/- 3s per day
1 min
~ 48 hrs.
16 (24 hours plus 15 freely programmable)
comprising 4 time blocks
3 time blocks, works holidays, holidays, public holidays
500 events (First in Last out) with date, time,
Always open / time slot
Subject to change
Page 46 of 68 Pages
KESO KEK genie BS
16.3
KESO KEK Terminal Box
KESO KEK terminal boxes are supplied pre-wired.
16.3.1 Plastic 325x275x120 mm (LxWxT) landscape format
Article No.:
Standard variant:
Protection rating:
17.015.01.01.00
- Plastic box with door and
hinge (continuous hinge left)
- RJ45 housing box with patch
cable
- 3 pcs. PG screw connectors
M16x1
- 4 pcs. M16 grommets
- Assembly platen with two
top hat rails
- 16er double row terminal
- Circuit breaker
- 2 pcs. Relay socket
IP66
16.3.2 Plastic 325x275x120 mm (WxLxT) portrait format
Article No.:
Standard variant:
Protection rating:
KESO AG, 03/2009
17.015.02.01.00
cable
M16x1
top hat rails
- Circuit breaker
IP66
Subject to change
Page 47 of 68 Pages
KESO KEK genie BS
16.3.3 Plastic 275x225x80 mm (LxWxT) portrait format
Article No.:
Standard variant:
17.015.03.01.00
M16x1 with reducing plugs
- 1 pc. PG screw connectors
M28
top hat rails
- 2 pcs. Terminals for plus pin
- 2 pcs. Terminals for minus pin
- 1 pc. terminal for protective earth
- Circuit breaker
- 1 pc. Relay socket
This terminal box cannot be supplied with the drive control unit!
16.3.4 Steel plate 300x300x150 mm (LxWxT)
Article No.:
Basic type:
Protection rating:
Closure:
17.015.04.01.00
- Metal box with door and hinge
(continuous hinge left)
cable
M16x1
top hat rails
- Circuit breaker
IP66
Standard plastic closure
KESO AG, 03/2009
Subject to change
Page 48 of 68 Pages
KESO KEK genie BS
16.3.5 Steel plate 300x300x150 cm (LxWxT) lockable
Article No.:
Basic type:
Protection rating:
Closure:
17.015.05.01.00
- Metal box with door and hinge
(continuous hinge left)
cable
M16x1
top hat rails
- Circuit breaker
IP66
Prepared for locking cylinder
13.031, 23.031, 33.031 with flat bolt A3 (E.275 A3)
KESO AG, 03/2009
Subject to change
Page 49 of 68 Pages
KESO KEK genie BS
16.4
Technical Specifications Accessories Terminal Box
16.4.1 Power supply 12V / 4.0A / 48 W
Article No.:
Input:
Output:
Size:
V.001/54/27
100-240V AC, 1.8 A
12 V, 4.0A
approx. 93x78x68 mm (LxWxH)
16.4.2 Power supply 24V / 2.5A / 60 W
Article No.:
Input:
Output:
Size:
V.001/54/43
100-240V AC, 1.8 A
24 V, 2.5A
16.4.3 Power supply 24V / 5.0A / 120 W
Article No.:
Input:
Output:
Size:
KESO AG, 03/2009
V.001/54/28
100-240V AC, 1.8 A
24 V, 5.0A
Subject to change
Page 50 of 68 Pages
KESO KEK genie BS
16.4.4 Finder Relay 12V / 230V
Article No.:
V.001/54/29
Inductor V AC (50/60 Hz)
Rated voltage (UN)
AC/DC holding level:
AC/DC fallback level:
12 V DC
0.8 UN / 0.4 UN
0.2 UN / 0.1 UN
Contacts:
Number of contacts:
2 two-way contacts
Max. continuous current:
8A
Max. starting current:
15A
Nominal voltage:
250V AC
200 VA
Max. switching capacity AC1:
400 VA
Max. switching capacity AC15 (230V AC):
1 phase motor load, AC3 (operations): 0.3 kW
Max. switching current DC1 (220V): 0.12 A
Min. switching current:
300 (5/5) mW (V/mA)
Contact material standard:
AgNi
General information:
Reaction time / Release time:
Insulation coordinates:
Ambient temperature:
Relay protection class
Approval:
7/3 – (12/4 sensitive)
EN 61810-5 Æ 4 kV / 2
-40C° to +85C°
RT II
16.4.5 Finder Relay 24V / 230V
Article No.:
V.001/54/30
Inductor V AC (50/60 Hz)
Rated voltage (UN)
AC/DC holding level:
AC/DC fallback level:
24 V DC
0.8 UN / 0.4 UN
0.2 UN / 0.1 UN
Contacts:
Number of contacts:
2 two-way contacts
Max. continuous current:
8A
Max. starting current:
15A
Nominal voltage:
250V AC
200 VA
Max. switching capacity AC1:
400 VA
Max. switching capacity AC15 (230V AC):
1 phase motor load, AC3 (operations): 0.3 kW
Max. switching current DC1 (220V): 0.12 A
Min. switching current:
300 (5/5) mW (V/mA)
Contact material standard:
AgNi
General information:
Reaction time / Release time:
Insulation coordinates:
Ambient temperature:
Relay protection class
Approval:
KESO AG, 03/2009
7/3 – (12/4 sensitive)
EN 61810-5 Æ 4 kV / 2
-40C° to +85C°
RT II
Subject to change
Page 51 of 68 Pages
KESO KEK genie BS
16.4.6 Drive Control Unit EA 420, 509X STRG
Article No.:
V.001/54/34
Rated voltage 12-24 V DC stab.:
+15% / -10%
Rated voltage 12-18 V AC:
+15% / -10%
Current consumption N operations: 80 mA at 12 V DC:
40 mA at 24 V DC:
Current consumption motor operations:
450 mA at 12 V DC:
220 mA at 24 V DC:
Current consumption maximum: 1300 mA at 12 V DC
600 mA at 24 V DC:
Size:
Short Description:
4 Potential-free contacts
(30V AC / V DC 0.8A) for
Contact evaluation of:
Control events
Cylinder contact
Door handle actuation
Locking / unlocking of dead bolt
Temporary or permanent release
Automatic locking during power failure
Relocking time: 2-15 sec. adjustable
16.5
General Technical Data KESO KEK Emergency Power Supply
Type:
Size:
Automatic Charger:
Battery type:
Equipment:
Plastic box with lid
325x275x120 mm (WxHxT)
230V ~50 Hz for lead batteries
Lead battery rechargeable
- Main board with top hat rail
- 2 pcs. Grommets
- Relay socket with relay
Type 40.52 / 8A-250V
- Microfuse T3.15 AH, 250V
- 1 pc. Terminal for plus pin
- 1 pc. Terminal for minus pin
- 3 pcs. Terminals for 230V connection (N/P/Earth)
- 4 pcs. Cable ties
- 1 pc. Mains cable 3-pin approx. 1000 mm length
- 1 pc. Mains cable 2-pin approx. 1000 mm length
16.5.1 Emergency Power Supply Version 12 V
Article No.:
Out:
Battery performance:
V.001/54/44
12 V
12V / 5.4Ah
16.5.2 Emergency Power Supply Version 24 V
Article No.:
Out:
Battery performance:
KESO AG, 03/2009
V.001/54/45
24V
12V / 2.7Ah
Subject to change
Page 52 of 68 Pages
KESO KEK genie BS
17
End of battery life detection
When a key is inserted, the battery voltage is automatically measured for each action. The system indicates a drop in battery performance in three stages. Please inform your end users that
the system administrator must be notified when any of these indicators occurs. This ensures
that you can change the battery in good time.
1.
Indicator shortly before end of battery life
The key must be inserted twice in order to turn the key.
Measures and responses
When this indicator occurs, a qualified person should change the battery as soon as
possible. If the cylinder is exposed to extreme temperatures it is advisable to change
the battery immediately.
2.
Indicator immediately before end of battery life
The key must be inserted four times in order to turn the key.
When this indicator occurs, the battery must be replaced IMMEDIATELY by a qualified
person. If the battery is not replaced immediately, this can result in the KESO KEK genie
BS cylinder only responding to mechanical opening.
3.
Indicators at end of battery life
The cylinder assumes the preset position, e.g. electronically open or electronically
closed. If you do not specify the status at end of battery life when placing your order,
the KESO KEK genie BS cylinder will be delivered with the default powerless open state
at end of battery life. If you have a PC version, you can change the powerless state at any
time using the KESO K4 software.
If the preset position is <Powerless Status - closed>, the cylinder can only be actuated
from the mechanical side at end of battery life. If the preset position is <Powerless
Status - open>, the actuator is switched off at end of battery life and the KEK genie BS
cylinder will only check the mechanical function.
KESO AG, 03/2009
Subject to change
Page 53 of 68 Pages
KESO KEK genie BS
18
Battery change
A KESO key solution center must be capable of servicing the KESO KEK genie BS cylinder independently, and of maintaining the KESO KEK genie BS cylinder.
The battery lifetime is approx. 40,000 cycles or approx. 2 years. The battery must be replaced at
the latest when these thresholds are reached.
The KESO KEK genie BS cylinder should be serviced at least once a year. This includes checking
the battery status and cylinder action.
Never use force when separating or joining materials. Excessive force leads to damage!
When removing the battery, make sure that the cable is not stripped, broken or
jammed. Defective cables on the KESO KEK genie BS cylinder cannot be replaced. The
cylinder becomes useless and must be returned to KESO (this does not constitute a
guarantee case!). Never use hammers or other heavy tools for installation/deinstallation.
Knocking the cylinder body or its individual parts could destroy the precision mechanical parts and electronics.
18.1
Important notes on batteries
Important note: The battery powers the electronics. Each battery has a different operating voltage. For trouble-free battery use, make sure that the battery voltage is at least
1.45V! The stated battery data are guidelines! KESO AG cannot guarantee these values.
You can return batteries to KESO for professional disposal. In all other cases, please observe relevant, national laws and provisions.
KESO AG, 03/2009
Subject to change
Page 54 of 68 Pages
KESO KEK genie BS
19
Pin-out for EG.708
Before starting all work, make sure that the separating switch in the connection box is
set to OFF position and/or the power supply is disconnected from the power source!
Fitters must check this themselves before connecting the cable.
KEK Electronics Mains Version
19.1.1 Pin-out for Electronics (Layout V1.5) EG.708
19.1
Layout V1.5 / pin-out from left to right or top-down.
KESO KEK genie BS &
analog
KESO batchless antenna
KESO digiport 30 analog
Cable adjustment
ON-ON = 0.5m
1-ON = 2.0m
ON-2 = 4.0m
1-2
= 6.0m
Reader port RS-232
Standard setting
ON-ON = 0 5m
Reset KESO digiport 30
KESO KEK access
1: GND
2: RX
3: /Rx
4: V IN (12-24V)
5: Tx
6: /Tx
7: EARTH
LED Block
D10: red
D11: green
D12; yellow, Power OK
Peripherals
1: ERDE
2: V IN (12-24 V)
3: GND
4: REL. COM
5: REL. NO
6: REL NC
7: N.A.
8: FALL EIN
9: RK IN
10: BUZZER
KESO batchless
1: GND
2: RX
3: /Rx
4: V IN (12-24V)
5: Tx
6: /Tx
7: EARTH
Buzzer
KESO AG, 03/2009
Adapter PCB
Subject to change
Page 55 of 68 Pages
KESO KEK genie BS
KESO KEK genie BS &
analog
Reader port RS-232
Cable adjustment
ON-ON = 0.5m
1-ON = 2.0m
ON-2 = 4.0m
1-2
= 6.0m
RS485 / KEK access
1: GND
2: RX
3: /Rx
4: V IN (12-24V)
5: Tx
6: /Tx
7: EARTH
Standard setting
ON-ON = 0.5m
KESO batchless
1: GND
2: RX
3: /Rx
4: V IN (12-24V)
5: Tx
6: /Tx
7: EARTH
LED Block
D10: red
D11: green
Peripheral
Only Adapter PCB Connection
Buzzer
KESO KEK genie BS &
analog
KESO batchless Antenne
Cable adjustment
11
= 0.5m
10
= 2.0m
01
= 4.0m
00
= 6.0m
Reader port RS-232
Standard setting
11 = 0.5m
RS485 / KEK access
1: GND
2: RX
3: /Rx
4: V IN (12-24V)
5: Tx
6: /Tx
7: EARTH
LED-Block
D10: rot
D11: grün
D12; gelb, Power OK
Peripherals
1: Buzzer
2: Earth
3: RK IN
4: FALL EIN
5: REL. COM
6: REL NO
7: REL NC
8: GND
9: V IN (12-24V)
KESO batchless
1: GND
2: RX
3: /Rx
4: V IN (12-24V)
5: Tx
6: /Tx
7: EARTH
Buzzer
KESO AG, 03/2009
Subject to change
Page 56 of 68 Pages
KESO KEK genie BS
KESO KEK genie BS
& analog
Cable adjustment
11
= 0.5m
10
= 2.0m
01
= 4.0m
00
= 6.0m
Reader port RS-232
Standard setting
11 = 0 5m
KESO KEK access
RS 485
KESO batchless
LED Block
D10: red
D11: green
Peripherals
1: Earth
2: RK IN
3: FALL EIN
4: REL. COM
5: REL NO
6: REL NC
7: GND
8: V IN (12-24V)
KESO KEK genie BS
& analog
Reader port RS-232
LED Block
D10: red
D11: green
KESO KEK access
Peripherals
1: REL. COM
2: REL NO
3: REL NC
4: GND
5: V IN (12-24V)
RS 485
KESO batchless
KESO MOZY eco IN/OUT
KESO AG, 03/2009
Subject to change
Page 57 of 68 Pages
KESO KEK genie BS
19.1.6 Cable adjustment analog
Cable length 0.5 m
(ON-ON)
Cable length 2.0 m
(1-ON)
Example:
Switch set to 1 2
V1.5
Cable length 4.0 m
(ON-2)
Cable length 6.0 m
(1-2)
19.2
Accessories for EG.708
19.2.1 Adapter PCB pin-out 10-pin to peripherals
1
2
3
4
5
6
7
8
9
10
EARTH
V IN (12-24V)
GND
REL. COM
REL. NO
REL. NC
Peripheral connectorr
Electronics EG.708
and
Electronics EG.709
LATCH IN
RK IN
BUZZER
19.2.2 Adapter PCB pin-out 7-pin to RS-485
1
2
3
4
5
6
7
8
9
10
KESO AG, 03/2009
GND
Rx
/Rx
V in (12-24V)
Tx
/Tx
EARTH
RS-485 Connector
Electronics EG.708
and
Electronics EG.709
Subject to change
Page 58 of 68 Pages
KESO KEK genie BS
20
Connection example
Before starting all work, make sure that the separating switch in the connection box is
set to OFF position and/or the power supply is disconnected from the power source!
Fitters must check this themselves before connecting the cable.
The following connection examples are non-exhaustive.
20.1
KESO MOZY eco
No cables, apart from the KESO MOZY eco main cable (K.510), are required for use with
the 17.015.01… and 17.015.02… terminal boxes.
The required cables are provided with the 17.015.01 and 17.015.02 connection boxes
and simply require connecting at the right positions.
V1.5
1
2
3
4
5
6
7
KESO AG, 03/2009
Subject to change
1
2
3
4
5
6
7
8
Page 59 of 68 Pages
KESO KEK genie BS
21
Installation
Installation and assembly must be performed by authorised KESO solution partners.
Observe the installation guide; your warranty is voided in case of improper use or
installation. Read this installation guide carefully before installing. Observe VDE rules
and ESD rules. If you have any queries regarding installation, please contact your
dealer.
21.1
Wiring
21.1.1 Basic principles
To ascertain the cable lengths and network topology to use, consider the possible distances between the required voltage and the access points in question.
21.1.2 Locking systems
The power consumption ratings for locking components, that is, electrical openers, drive cylinders, motor locks, switching locks etc. are quoted in the data sheets for these products.
21.2
Installing the KESO KEK genie BS cylinder
KESO KEK genie cylinders are easy to handle and install. The basic steps for installation are no
different from a commercially-available, mechanical cylinder, however, you must exercise more
care when installing the KESO KEK genie cylinder as it is sensitive to knocks and extreme pressure! Never overtighten the face plate screws.
Never use force when separating or joining materials. Excessive force leads to damage!
When fitting or removing, make sure that the cable is not stripped, broken or jammed.
Defective cables on KESO KEK genie cylinders cannot be replaced. The cylinder becomes useless and must be returned to KESO (this does not constitute a guarantee
case!). Never use hammers or other heavy tools for installation/deinstallation. Knocking the cylinder body or its individual parts could destroy the precision mechanical
parts and electronics.
21.2.1 Cable routing
The recess for the electronics must guarantee the ability to fit the cylinder cable without exposing it to pressure. The cable inlet must be milled or drilled to avoid kinks or friction that could
damage the cylinder cable.
The cylinder cable must be routed behind the lock housing!
Never bend the cylinder cable over sharp edges!
green
yellow
The cable colour must match those on the red
grey
connecting plug!
brown
white
KESO AG, 03/2009
Subject to change
green
yellow
red
grey
brown
white
Page 60 of 68 Pages
KESO KEK genie BS
21.3
Assembly options for face plate versions
KESO AG, 03/2009
Subject to change
Page 61 of 68 Pages
KESO KEK genie BS
21.4
Assembly options for fitting versions
optional
adhesive foil
optional
base plate
optional
adapter box
NOTE
The cylinder projection (D) must be at least 18.5 mm from the installation base. For professional
installation of the fitting cover, the KESO KEK genie BS cylinder should project by a maximum of
26.5 mm from the installation base.
D
D
KESO AG, 03/2009
= minimum
= maximum
18.5 mm from installation base
26.5 mm from installation base
Subject to change
Page 62 of 68 Pages
KESO KEK genie BS
22
KESO KEK Checklist
Use this checklist as a starting point. The checklist is not exhaustive! Always modify the checklist
to reflect the requirements of persons and individual buildings!
22.1
Responsibilities
•
•
•
•
•
•
22.2
Who is responsible for the overall project management: KESO solution centre, customer,
computer scientist, electrician, cabinet maker, fitter etc.?
Who is the contact for the project customer-side; the task may be assigned to multiple
persons, i.e. security officer, infrastructure, IT etc.?
Who is responsible for wiring the data lines?
Who is responsible for preparing connections such as e.g. cable ducts and sockets for antennas, sockets for the power supply etc.?
Who is responsible for the doors and accessories?
Do you need additional information, such as the number of doors with possible extensions,
step-by-step rollout etc.?
Implement project planning:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
KESO AG, 03/2009
Assign positions and identifiers to each access point/locking point, e.g. main entrance.
With respect to the overall intervention, escape route and access concept per door, define
which components and which accessories are required.
For each door define how the door should behave in offline mode, and how emergency
opening will be handled, e.g. in case of malfunction or power failure.
For each door plan the power supply for additional components.
Define the installation position of the products and components.
Define the data lines/bus wiring taking the distances into consideration, i.e. identify and
define the topology.
Specify IP addresses
Define required user privileges: who needs what authorisation with respect to using the
KESO K4 Software.
Make sure that the user PCs that need access to the system possess the required components (software/hardware).
Define access organisation
Define and coordinate third-party tasks.
Define the schedule for the individual steps of the project and monitor their completion.
Plan the installation taking preparatory work by third parties into consideration.
Schedule software training customer side.
Define services and/or support services e.g. in the scope of a Service and Maintenance Contract
Plan approval of the installed components: when and by whom?
Subject to change
Page 63 of 68 Pages
KESO KEK genie BS
23
KESO KEK Planning Aids
23.1
Project workflow
The following project workflow is designed to facilitate planning for KESO KEK net.
This project workflow is not exhaustive and must be modified to reflect the
requirements of persons and individual buildings in all cases!
23.1.1 Consultation
Hold an advisory meeting. You will need brochures, selling points, etc.
23.1.2 Offer
Draft an offer and create a product catalogue. Include a Service and Maintenance Contract.
23.1.3 Kick-Off
Organise and hold a project meeting, kick-off meeting.
Participants: KESO solution centre, customer, IT, electrician, joiner, fitter etc. Record the details
of access points/locking points (identifier, position, function, access etc…), incl. locking technology - what is required, where cables are to be routed, and where equipment is to be
mounted.
Everyone needs to know what they have to do!
23.1.4 Order
Draft orders and submit to appropriate suppliers. Monitor orders and coordinate deadlines.
23.1.5 Training
Software user training, prepare a user guide incl. data on privileges
23.1.6 IT Infrastructure
Check whether the IT infrastructure is prepared for KESO KEK net. Define and implement any
required measures.
23.1.7 Pre-Installation
Check if data lines and power supplies for the components are in place. Perform a functional
test of the installation.
23.1.8 Installation
Assemble and install the components. Perform a functional test of the installation.
23.1.9 Commissioning
Commission the system. Individually check each function at each access point/locking point.
Make a data backup of the commissioning data.
KESO AG, 03/2009
Subject to change
Page 64 of 68 Pages
KESO KEK genie BS
23.1.10 Approval
Have the system approved with the KESO solution centre, customer, IT, electrician, joiner, fitter,
etc. and create an approval protocol.
23.1.11 Handover
Hand over all documentation incl. the approval protocol for access points/locking systems
(door management) to the customer.
23.1.12 After Sales
Support, service and maintenance to be performed by a solution centre.
KESO AG, 03/2009
Subject to change
Page 65 of 68 Pages
KESO KEK genie BS
24
Maintenance / Care / Repairs
24.1
Maintenance
To ensure trouble-free operations of cylinders and electronics, we recommend calling in an approved key solution centre. Our solution centres will be pleased to give you details of maintenance contracts. In all other cases, please contact KESO AG who will provide the address of a
qualified partner who will be pleased to contact you to discuss maintenance contract options
and offer you a maintenance contract.
Firmware updates must be installed by the customer. Error free functioning of the product cannot be guaranteed if you fail to update the firmware version. The latest firmware can be
downloaded from www.keso.com.
24.2
Care
Wipe KESO products and accessories with a damp or antistatic cloth. Never use aggressive
cleaning agents or clean with silicon oil. This can cause malfunctions. Cylinder locks must be
treated with such maintenance products as recommended by us - at least as frequently as indicated. Never treat cylinder locks with resinous materials such as oil and graphite. The cleaning
agent must be inserted into the cylinder with the key. Never spray cleaning products directly
into the cylinder lock! Use only cleaning agents without corrosive substances.
24.3
Repairs
Never repair or modify KESO products or accessories. Send defective devices or cables for repair
to KESO AG, or to one of our subsidiaries, using the original packaging.
25
ESD Rules
Static discharge on electronic subassemblies can cause considerable damage to the assembly; it
should not be used in this case. Applicable regulations must be adhered to.
26
Product services
Never repair KESO products or accessories. Send defective devices in the original packaging and
accompanied by the delivery note to an authorised KESO dealer or to KESO AG for repairs.
KESO AG, 03/2009
Subject to change
Page 66 of 68 Pages
KESO KEK genie BS
27
Notes
KESO AG, 03/2009
Subject to change
Page 67 of 68 Pages
PB_01_011_EN_KESO KEK genie BS V003.doc
KESO AG
Sicherheitssysteme
Untere Schwandenstrasse 22
CH-8805 Richterswil
Telefon
Telefax
E-Mail
Internet
+41 44 787 34 34
+41 44 787 35 35
[email protected]
www.keso.com
KESO GmbH
Maurerstrasse 6
D-21244 Buchholz i.d.N
KESO SA
Succursale Suisse romande
Zl. Le Trési 9B
CH-1028 Préverenges
KESO Italia B.U.
Via Modena, 68
I-40017 San Giovanni in Persiceto
Telefon
Telefax
E-Mail
Internet
Telefon
Telefax
E-Mail
Internet
Telefon
Telefax
E-Mail
Internet
+49 4181 924-0
+49 4181 924-100
[email protected]
www.keso.de
+41 21 811 29 29
+41 21 811 29 00
[email protected]
www.keso.com
+39 51 681 25 59
+39 51 681 24 01
[email protected]
www.keso.it
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safty and convenience.

KESO KEK genie BS

Transcription

Similar documents

Working Safely at KEK

Changing Ringtones and Alert Tones

Changing Ringtones and Alert Tones

syntheticmarinelubric antsyntheticmarinelub ricantssyntheticmarin e

Vu 102 cms (40”) LED TV Model: 40D6575

Read - Suzuki Ad Planner

CCTV Cabling Considerations - Berk-Tek

How to convert MTD Chipper/Shredder into Hammer Mill

Sony Xperia XA Ultra