Wax and Seal

Wax and
Seal
01
Inspiration: 12498
02
In order to change the design,
unscrew the top part of the
seal.
03
Light wick in the wax stick and
drip a suitable amount of wax.
04
Or you may use a sealing wax
gun for the wax sticks.
Wax and Seal
07
05
Wait for five to ten seconds
until the wax has cooled down.
Then push a cooled seal into
the warm wax.
06
Wax sticks with a wick or in a sealing wax gun is
melted and designs from seals are pushed into
the wax. They can be made either directly onto
the desired object or on grease proof paper so
that the print may be transferred.
Push down the seal for a few
seconds and then remove it.
You may make a wax seal on
a piece of grease proof paper.
08
The wax seal can now be
removed from the grease
proof paper.
You may put a piece of twine
into a hole made in the flap on
the back of the envelope and
“glue” it with wax. Then push
the seal into the wax, leaving a
print.
Wax seal Set, D: 18
mm, crown, flower,
fleur de lis, 1set
27021
Wax seal set, D: 18
mm, heart,
butterfly, clover,
1set
27022
Sealing Wax Gun, 1
pc
27027
Sealing Gun Wax,
D: 8 mm, L: 10 mm,
red, 6pcs
27023
Sealing Gun Wax,
D: 8 mm, L: 10 mm,
mother-of-pearl,
gold, silver, 6asstd
27024
Sealing Wax, L: 10
cm, red, 3pcs
27025
Sealing Wax, L: 10
cm, gold, silver,
bronze, 3 asstd
27026
Seal handle, D: 18
mm, 1 pc
27011
Coin, D: 18 mm,
fleur de lis, 1pc
27014