tirino energia

TIRINO ENERGIA
Piazzale Azogeno, 2
65022 Bussi Sul Tirino (Pe)
Sedi Operative:
Via Provinciale, 27 Loc. Piano D'Orta 65020 Bolognano (Pe)
Strada Statale 153 – Bussi Sul Tirino (Pe)
Telefono:+ 39 085 8884737
Fax: + 39 0858886184
CERTIFICAZIONI
ISO 9001:2008 conseguita con DNV - GL
ISO 3834 - 2:2005 conseguita con DNV - GL
Tirino Energia srl
Pag. 1
La Tirino Energia può
contare sulla tradizione e
sull’ esperienza
cinquantennale nel settore
del piping, della caldareria
in genere, dei serbatoi a
pressione di qualsivoglia
dimensione nonché nel
campo della costruzione di
centrali turbogas, a
biomassa, impianti chimici,
petrolchimici e di grandi
strutture metalliche.
Centrale EDISON di Bussi Sul Tirino (Pe)
Tirino Energia srl
Pag. 2
Le sedi operative della Società, che
occupano complessivamente un’area
di 45.000 mq, con una superficie
coperta di 7000 mq, si trovano a 40
Km dal porto di Ortona (CH), a 10 Km
dall’interporto di Manoppello Scalo
(Pe) e pochi Km. dai caselli
Autostradali della A25 Pescara-Roma
di Bussi Sul Tirino (Pe) e Torre dei
Passeri (Pe)
La vicinanza ai principali
snodi consente infatti la
realizzazione di manufatti di
notevoli dimensioni, anche
realizzati direttamente sulla
yard del porto di Ortona (Ch).
Tirino Energia srl
Pag. 3
Tra le esperienze, possiamo
annoverare la realizzazione
dell’Impianto di produzione di
Bioetanolo di seconda
generazione del Gruppo Mossi
e Ghisolfi. realizzato a
Crescentino (Vc)
Prefabbricazione e montaggio
di tutto il piping, montaggio
strutture ed equipment della
torre distillation, power plant e
chiller compressor.
E’ attualmente impegnata con
interventi di manutenzione
programmata di tutto l’impianto
Tirino Energia srl
Pag. 4
La Tirino Energia si è aggiudicata l’appalto per un valore complessivo di $ 48.500.000 relativo al
montaggio delle strutture metalliche, del piping e degli equipment facenti parte il nuovo impianto di
PET – PTA del gruppo Mossi & Ghisolfi in Corpus Christi Texas
La gestione operativa è affidata alla sua controllata Maverick llc con sede legale a Larkin Houston .
Tirino Energia srl
Pag. 5
SECTORS OF MEMBERSHIP
TIRINO
ENERGIA
SRL
Services
Metalmechanical
Industry
Chemical
Petro-chemical
Energy
Cement
Offshore
Design
Drawings
Site works
Supervision
Storage Tanks
Pressure
vessels
Heat
exchangers
Skids
Piping
Steelworks
Site works
Tirino Energia srl
Storage Tanks
Pressure
vessels
Heat
exchangers
Skids
Piping
Steelworks
Site works
Storage Tanks
Pressure
vessels
Heat
exchangers
Skids
Piping
Steelworks
Site works
Exhaust ducts
Smoke stacks
Boiler Casings
Casings for
filters
Casings for
electro-filters
Exhaust ducts
Smoke stacks
Storage silos
Steelworks
Maintenances
Site works
Storage Tanks
Pressure
vessels
Heat
exchangers
Skids
Piping
Steelworks
Floats
Site works
Pag. 6
ORGANIZATION CHART
Managing
Director
Director
Quality
Assurance
Financial Director
Site Manager
Production
Manager
Work crews for
job site
Procurement
Manager
Workforce
Technical
Manager
Buyers
Financial
Manager
Technical Dept.
Accounting
Dept.
Sales Manager
Contract
Administration
Maintenance
Warehouse
Tirino Energia srl
Pag. 7
LOGISTIC WORK SHOP CAPABILITIES
FORKLIFT TRUCK
40 Tons
CONTAINER LIFTER
35 Tons
TRAVEL LIFT
100 Tons
Piattaforma con gru
35 mt
Piattaforma con grù
25 mt
Tirino Energia srl
Pag. 8
LARGE STORAGE TANKS
Tirino Energia srl
Pag. 9
PRESSURE VESSELS
Tirino Energia srl
Pag. 10
Tirino Energia srl
Pag. 11
SKID
Tirino Energia srl
Pag. 12
ACCUMULATION TANK
Tirino Energia srl
Pag. 13
INDUSTRIAL PLANTS COMPLETE INSULATION
Tirino Energia srl
Pag. 14
INSTALLATION PLANTS
Tirino Energia srl
Pag. 15
Tirino Energia srl
Pag. 16
Tirino Energia srl
Pag. 17
DUCTS
Tirino Energia srl
Pag. 18
Tirino Energia srl
Pag. 19
Tirino Energia srl
Pag. 20
REFERENCE LIST FOR PRESSURE VESSELS
BURIED
AGIP GAS
Design, supply material, prefabrication, transport and erection to N° 5 pressure vessels mc/each
420, ISPESL tested, for GPL storage, Napoli seaport:
 int = 4.000 mm - Thk. 20 mm - Lenght = 30.900 mm - Fe 510.2 KW - Weight = 85.000 Kg.
Design, supplì material, prefabrication and erection di attrezzature per electro plant, piping,
small carpentery and civil work included in the deposit handling and GPL storage of Imperia..
Q8 – FIAMMA LAZIALE
Design, supply material, prefabrication, transport and erection to N° 6 pressure vessels mc/each
400, ISPESL tested, for GPL storage , Supino (FR) plant:
 int = 4.200 mm – Thk. 22 mm - Lenght = 27.100 mm - Fe 510.2 KW - Weight = 80.000 Kg.
FIAMMA 2000
Design, supply material, prefabrication, transport and erection to N° 3 pressure vessels mc/each
200, ISPESL tested, for GPL storage, Cagliari plant.
 int = 3.200 mm – Thk. 18 mm - Lenght = 22.800 mm - Fe 510.2 KW - Weight = 40.000 Kg.
LUMAGAS
Design, supply material, prefabrication, transport and erection to N° 2 pressure vessels mc/each
180, ISPESL tested, for GPL storage, Napoli plant.
 int = 4.000 mm - Thk. 20 mm - Lenght = 11.660 mm - Fe 510.2 KW - Weight = 37.000 Kg.
OVEGAS
Design, supply material, prefabrication and transport to di N°1 pressure vessels mc/each 50
ISPESL tested, for GPL storage, Frosinone plant.
 int = 2.500 mm – Thk. 12 – Lenght = 8520 – Fe 510.2 KW – Weight = 11000 Kg.
SGIG
Design, supply material, prefabrication and transport N°2 pressure vessels mc/each 190, PED
tested, for GPL storage, SUDGAS - Siena plant.
 int = 3.670 mm – Thk. 18 – Lenght= 16900 – P 355 NH – Weight = 40000 Kg.
WALTER TOSTO SpA
Prefabrication, Tested e Painting to N. 1 pressure vessels mc./ each 200, PED tested, GPL
storage;
 int = 3.750 mm – Thk. 18 – Lenght = 15100 – P 355 NH – Weight = 40000 Kg.;
Tirino Energia srl
Pag. 21
Design, supply materials, prefabrication, tested and painting to N. 4 pressure vessels mc./each
150, PED tested, GPL storage:
 int = 3.000 mm – Thk. 14 – Lenght = 23900 – P
355 NH – Weight = 30000 Kg.
REFERENCE LIST FOR DUCT, EXHAUST DUCT
AND INLET DUCT
NUOVO PIGNONE SPA
Material supply, prefabrication, painting, testing, packing to:
N°14 Exhaust Duct for FR6 MD internal insulated , int = 3500, H = 50.000 mm;
N°15 Exhaust Duct for FR7 MD internal insulated,  int = 4835, H = 40.000 mm;
N°14 Exhaust Duct for FR6 GD internal insulated,  int = 3500, H = 16.000 mm;
N° 8 Exhaust Duct for PGT5 internal insulated,  int = 4835, H = 40.000 mm;
N°18 Silencer Duct for PGT5, internal insulated;
N° 8 Silencer Duct for FR7 MD, internal insulated;
N° 8 Exhaust duct for PGT10, in AISI 316 L, internal insulated ,  int = 2000, H = 30.000
mm;
N°16 Transition for filter house FR7 MD in AISI 316 L.
TIGA project: Exhaust duct MS7001 in AISI 316 L;
Dukhan project : Exhaust duct MS5002C-Qatar in Fe 430B + AISI 409;
Obiafu-Obrikoh project: Exhaust duct PGT10A in Fe430B + AISI 409;
Westcoast project: Exhaust duct PGT25 Turbocompressor in Fe430B + AISI 409;
Enron project: Exhaust duct PGT25 in Fe430B + AISI 409;
Mesdar project: Exhaust duct PGT2 in Fe430B + AISI 409;
Ras Laffan-Qatar project: Exhaust duct MS5002C G.T. in AISI 316 L;
Union Fenosa project: Exhaust duct MS7001 in Fe430B + AISI 409;
Sonelgaz project: Exhaust duct FREM 9 in AISI 316 L + AISI 316 L;
Tengiz project: Exhaust Duct MS5002D KAZAKISTAN in Fe430B + AISI 409;
Yoho project: Exhaust Duct PGT25 in Fe430B + AISI 409;
Abu Redis project: Exhaust Duct GE10 MONO in Fe430B + AISI 409;
Assaluye project Exhaust Duct MS 5002D in Fe430B + AISI 409;
Assaluye project: Inlet Duct MS 5002D in AISI 316L + AISI 316L.
Skikda project: Exhaust Duct MS7001EA in S275JR + AISI 409.
Gassi Touil project: Exhaust Duct MS7001EA in S275JR + AISI 409
Qafco 5 project: Exhaust Duct MS6001B in S275JR + AISI 409
Qafco 6 project: Exhaust Duct MS6001B in S275JR + AISI 409
Tirino Energia srl
Pag. 22
ACEA ELECTRABEL
Supply material, design, prefabrication, transport and erection new silencer duct for the TG1 e
TG2 Acea Montemartini (Roma) plant;
CCT – MARCEGAGLIA
Supply material, design and prefabrication to:
- N°4 Exhaust duct,  int = 2650, H = 38.000 mm in Corten A;
- N°2 By-pass duct,  int = 2650, H = 19.000 mm in Corten A;
- N°1 Exhaust duct,  int = 3000, H = 50.000 mm in Corten A.
SADELMI SPA
Design, supply material, prefabrication, painting and packing to n. 1 Chimney, in S355JOWP
(CORTEN), internal diameter 4.000 mm, Height 100.000 mm, thk. 28/12 mm, Weight 250.000
Kg;
REFERENCE LIST FOR CONSTRUCTION AND
ERECTION PLANT
BABCOCK W.I.
Supply materials, prefabrication, painting, insulation, transport and erection to waste incenerator
Ascoli Piceno plant , Parma plant , Cesena plant, Teramo plant, Montemarciano plant, Osimo
plant and Barcellona (Spain) plant.
GUERRATO SpA
Construction and erection mechanical plant for new Presidio Ospedaliero Chieti.
COMUNE DI PESCARA
Land reclamation and enlargement the dump for urban waste Pescara city.
SOCIETA’ MERDIONALE INERTI – GRUPPO MARROLLO
Design, supply material, construction, painting, transport and erection of steel structured for
shopping center “L’Aquilone – Gruppo CONAD” – L’Aquila.
REDECAM GROUP SPA
Design, supply materials, construction, painting to n. 2 Chmney Ø 6000, height 60 mt for
cement factory - Algeria
Technical Assistance for the installation work Cement factory Adjair Soud – Algeria –
BUZZI UNICEM SPA
Technical Assistance for the installation work Cement factory Soul El Gozlane - Algeria.
Tirino Energia srl
Pag. 23
EDISON SPA
Extraordinary Maintenance – Gas Turbine Edison Bussi Sul Tirino plant;
Construction and Erection of the piping for the revamping BOP plant – Gas Turbine Edison
Bussi sul Tirino plant;
Modification of the steam circuit - Edison Gas Turbine Bussi sul Tirino plant;
Erection inlet duct of the filter house - Edison Gas Turbine Bussi Sul Tirino plant;
Construction and Erection anti-ice system - Gas Turbine Celano plant;
Extraordinary Maintenance of boiler piping of Gas Turbine Celano plant;
ACEA ELECTRABEL
Design, supply materials , prefabrication, transport and erection of the new silencer duct for the
TG1 e TG2 Acea Montemartini (Roma) plant;
BONATTI SPA
Construction, Welding, NDE control, PWHT, Painting, Packing and Transport to piping
pressure for Gissi plant, in A 106 Gr. B e C, A 335 P11 e A 335 P22.
DEMONT Srl
Construction and erection of the tank in AISI 316L for paper factory;
Erection air duct in AISI316L, Corten, Alluminium e galvanized steel, for english paper
factory;
Construction of the steel structures for Spanish paper factory;
AUSIMONT
Design, construction and erection steel structures and equipments for detergents plant - Bussi
(PE).
Construction and erection steel structures and equipments for Hydrogen Peroxide plant - Bussi
(PE).
Design, construction, ISPEL test, transport and erection of the column oxidation in AISI 316 L
Mo ≥ 2,5%, including dishes filtering and internal distributor - Bussi (PE):
 int = 6.000 mm – Thk. 28 mm - Lenght = 22.000 mm – Weight = 110.000 Kg.
Construction and erection Sodium Perborate plant - Bussi (PE).
Construction and erection chloromethane plant expansion - Bussi (PE).
Design, construction, transport and erection of the storage tank acetic acid D 2010 in ASISI
316L - Bussi (PE) plant:
 int = 3.200 – Thk. 12 mm - Height = 7.000 - Weight = 12.000 Kg.
Design and construction to N° 5 equipment in AISI 316 including internal and external coil for
latex plant - Spinetta Marengo (AL).
Design, construction, transport and erection of the vetrified tank D 300 for chloromethane plant
- Bussi (PE).
Tirino Energia srl
Pag. 24
 int = 7.000 mm – Thk. 15 mm – Fe 510.2 KW - Height = 10.000 mm.
Construction and erection ducts in AISI 316 L for the transport of sodium perborate - Bussi
(PE) plant.
Construction and erection piping and equipment for Chimica Fine plant - Bussi (PE).
CHEMTEX Italia Spa
Construction, testing, painting and erection Piping in carbon steel, alloy steel and stainelss steel
and steel structures for Bioethnolo Plant - Crescentino (VC).
Gas Turbine Power Plants:
EDISON / BUSSI (130 MW)
Prefabrication and erection inlet ducts and exhaust duct;
Prefabrication and erection exhaust chmney;
Prefabrication and erection by-pass chmney;
Prefabrication harps;
Prefabrication and erection casing box;
Erection of the boiler and sealing;
Prefabrication and erection tested and no tested piping;
Insulation piping;
Prefabrication and erection auxiliary stell strucuteres;
EDISON / S.QUIRICO (130MW)
Prefabrication and erection inlet ducts and exhaust duct;
Prefabrication and erection exhaust chmney;
Prefabrication harps;
Prefabrication and erection casing box;
Erection of the boiler and sealing;
Prefabrication and erection tested and no tested piping;
Insulation piping;
Prefabrication and erection auxiliary stell strucuteres;
SONDEL / PORCARI (100MW) Prefabrication and erection casing box;
Erection of the boiler and sealing;
Prefabrication and erection inlet ducts and exhaust duct;
Prefabrication and erection auxiliary stell strucuteres;
EDISON/CONTARINA (130MW) Prefabrication and erection inlet ducts and exhaust duct;
Prefabrication and erection exhaust chmney;
Prefabrication harps;
Prefabrication and erection casing box;
Erection of the boiler and sealing;
Prefabrication and erection tested and no tested piping;
Insulation piping;
Prefabrication and erection auxiliary stell strucuteres.
ABB / CELANO (130MW)
Prefabrication and erection steel frame for boiler and ducts;
Prefabrication and erection inlet ducts and exhaust duct;
Prefabrication and erection exhaust chmney;
Erection Harps;
Prefabrication and erection casing box;
Prefabrication and erection tested and no tested piping;
Insulation piping;
Tirino Energia srl
Pag. 25
ABB / FALCONARA (130MW)
Tirino Energia srl
Prefabrication and erection auxiliary stell strucuteres;
Final Painting.
Prefabrication and erection steel frame for boiler and ducts.
Prefabrication and erection inlet ducts and exhaust duct;
Prefabrication casing boiler;
Prefabrication a exhaust chmney;
Prefabrication auxiliary stell strucuteres;
Prefabrication correction grid flow;
Pag. 26
Tirino Energia srl
Pag. 27