Control units - Nordfalk A/S

274
General accessories
Control units
LIBRA C LX QSG2 D113715 00002
THALIA D113745 00002
• Application: control panel for one or two
• Application: control panel for one or two 24V
•
•
•
• Board power supply: 230V single-phase
• Operators power supply: 24Vdc 180W max
•
•
operators for swing gates (LUX BT)
Board power supply: 230V single-phase
Operators power supply: 24Vdc
Main features: removable terminal blocks,
programming with display and incorporated
dual channel receiver, anti-crushing, slowdown
during opening and closing and electronic
self-learning, D-TRACK torque control system,
traffic-light management possible with SCS IO
and TLB boards
Main functions: automatic re-closing, fast
closing, partial opening, deadman feature, pulse
blocking, separate opening/closing
Control panel for one or two LUX BT series
operators
operators for swing gates
each operator
• Main features: removable terminal blocks
with new standard colour-coding, simplified
scenario-based programming with display and
incorporated dual channel receiver, D-Track anticrushing system , slowdown during opening and
closing and electronic self-learning
• Main functions: automatic re-closing, fast
closing, partial opening, deadman feature
• Compatibility: LIBRA C MA, LIBRA, LIBRA R,
LIBRA MA R
B
B
SIRIO MA D113713 00002
LEO D MA D113695 00002
• Application: control panel for one operator for
• Application: control panel for one ICARO
•
• Board power supply: 230V single-phase
• Operators power supply: 230Vdc 750W max
• Main features: removable terminal blocks,
•
•
•
•
industrial sectional doors
Board power supply: 230V single phase or
400V three-phase
Operators power supply: 230V single phase or
400V three-phase
Main features: removable terminal blocks,
programming and diagnostics with trimmers
and dip switches, LED diagnostics, stop button,
opening and closing controls on panel, fuse
holders incorporated in panel
Main functions: automatic re-closing, separate
opening and closing
Compatibility: SIRIO TMA
operator
programming with display, incorporated dual
channel receiver and connector for additional
receiver, anti-crushing, slowdown during
opening and closing and electronic self-learning
• Main functions: torque management, motor
slowdown and braking, pedestrian opening,
separate open/close, TIMER input, fast closing
and self-diagnostics
• Compatibility: LEO series
B
B
PEG CB INT P111459
PLR CB 1 D113753 00001
• Application: interface for connection of PEGASO
•
•
•
•
Application: control panel for 1 PILLAR operators
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
Main features: removable terminal blocks,
programming with potentiometers and faults
signalling leds
• Main functions: automatic re-closing, separate
opening and closing
operators to an external control unit
• Main features: removable terminal blocks,
transmission of travel limits, auxiliary contacts
and motor alarms to external control unit
• Compatibility: PEGASO
B
Accessories
generic 281
Kit 26
Complete Systems 291
275
PLR CB 2 D113753 00002
PLR CB 3 D113753 00003
• Application: control panel for 2 PILLAR
• Application: control panel for 3 PILLAR
•
•
•
• Board power supply: 230V single-phase
• Operators power supply: 230V single-phase
• Main features: removable terminal blocks,
•
operators
programming with potentiometers and faults
signalling leds
• Main functions: automatic re-closing, separate
opening and closing
PLR CB 4 D113753 00004
TWR CB 1 D113752 00001
• Application: control panel for 4 PILLAR
• Application: control panel for 1 TOWER
•
•
•
• Board power supply: 230V single-phase
• Operators power supply: 230V single-phase
• Main features: removable terminal blocks,
•
operators
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
Main features: removable terminal blocks,
programming with potentiometers and faults
signalling leds
Main functions: automatic re-closing, separate
opening and closing
operators
programming with potentiometers and faults
signalling leds
• Main functions: automatic re-closing, separate
opening and closing
TWR CB 2 D113752 00002
TWR CB 3 D113752 00003
• Application: control panel for 2 TOWER
• Application: control panel for 3 TOWER
•
•
•
• Board power supply: 230V single-phase
• Operators power supply: 230V single-phase
• Main features: removable terminal blocks,
•
Accessories
operators
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
Main features: removable terminal blocks,
programming with potentiometers and faults
signalling leds
Main functions: automatic re-closing, separate
opening and closing
operators
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
Main features: removable terminal blocks,
programming with potentiometers and faults
signalling leds
Main functions: automatic re-closing, separate
opening and closing
operators
programming with potentiometers and faults
signalling leds
• Main functions: automatic re-closing, separate
opening and closing
generic 281
Kit 26
Complete Systems 291
276
TWR CB 4 D113752 00004
THALIA P 120V D113747 00001
• Application: control panel for 4 TOWER
• Application: control panel for one or two 24V
•
•
•
• Board power supply: 230V single-phase
• Operators power supply: 24Vdc 180W max
•
operators
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
Main features: removable terminal blocks,
programming with potentiometers and faults
signalling leds
Main functions: automatic re-closing, separate
opening and closing
operators for swing gates
each operator
• Main features: removable terminal blocks
with new standard colour-coding, simplified
scenario-based programming with display and
incorporated dual channel receiver, D-Track anticrushing system , slowdown during opening and
closing and electronic self-learning
• Main functions: automatic re-closing, fast
closing, partial opening, deadman feature
• Compatibility: LIBRA C MA, LIBRA, LIBRA R,
LIBRA MA R
B
ALCOR N SD 120V D113706 00003
ARIES UL/CSA 120V60HZ D113198
00001
• Application: control panel for one or two swing
gate operators
• Application: control panel for one or two
• Board power supply: 230V single-phase
• Operators power supply: 230V single-phase
operators for swing gates
• Board power supply: 230V single-phase
• Operators power supply: 230V single-phase
300W max each operator
• Main features: removable terminal blocks,
300W max each operator
settings controlled by potentiometers, fault
signalling LEDs and incorporated dual channel
receiver
• Main functions: stays locked when closed, 3/4
step logic, partial opening, separate opening/
closing
• Compatibility: ALCOR 120V
• Main functions: stays locked when closed, 3/4
step logic, partial opening, fast closing and selfdiagnostics
B
B
THALIA P D113747 00002
LIBRA C MA D113672 00005
• Application: control panel for one or two 24V
• Application: control panel for one or two 24V
•
•
• Board power supply: 230V single-phase
• Operators power supply: 24Vdc 180W max
•
•
•
operators for swing gates
Board power supply: 230V single-phase
Operators power supply: 24Vdc 240W max
each operator
Main features: removable terminal blocks
with new standard colour-coding, simplified
scenario-based programming with display and
incorporated dual channel receiver, D-Track anticrushing system , slowdown during opening and
closing and electronic self-learning
Main features: automatic closing, rapid closing,
partial opening, operation with deadman
feature, direct connection powered solenoid lock
and electromagnet, direct connection edge 8K2.
Compatibility: LIBRA C MA, LIBRA C LX,
LIBRA, LIBRA R, LIBRA MA R
swing gate operators.
each operator
• Main characteristics: removable terminal blocks,
programming with display and incorporated
dual channel receiver, anti-crushing, slowdown
during opening and closing and electronic selflearning
• Main functions: automatic re-closing, fast
closing, partial opening, deadman feature
• Compatibility: LIBRA, LIBRA R, LIBRA MA R
B
Accessories
B
generic 281
Kit 26
Complete Systems 291
277
LIBRA CB HIDE D113742 00002
ALCOR N D113706 00002
• Application: control panel for one or two HIDE
• Application: control panel for one or two swing
•
•
• Board power supply: 230V single-phase
• Operators power supply: 230V single-phase
•
•
SW operators
Board power supply: 230V single-phase
Operators power supply: 24Vdc 200W max
each operator
Main functions: automatic re-closing, fast
closing, partial opening, deadman feature, pulse
blocking, separate opening/closing
Main features: removable terminal blocks,
programming with display and incorporated
dual channel receiver, anti-crushing, slowdown
during opening and closing and electronic selflearning, D-TRACK torque control system
gate operators
300W max each operator
• Main features: removable terminal blocks,
settings controlled by potentiometers, fault
signalling LEDs and incorporated dual channel
receiver
• Main functions: stays locked when closed, 3/4
step logic, partial opening, separate opening/
closing
• Compatibility: ALCOR SD
B
RIGEL 5 D113693 00003
RIGEL 5 SD 110V D113693 00001
• Application: universal control panel for one or
• Application: universal control panel for one or
•
•
• Board power supply: 230V single-phase
• Operators power supply: 230V single-phase
•
•
•
two operators
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
600+600W
Main features: removable terminal blocks,
programming and diagnostics with display,
incorporated dual channel receiver, plug-in
connector for additional receiver, electric snap
latch or magnetic lock connection, electronic
torque limiter, electronic slowdown during
opening and closing, separate limit switch
inputs for each motor, possibility of traffic-light
management and hydraulic operator pre-heating
with SSR5 board
Main functions: automatic re-closing, separate
motor working times, stays locked when
closed, water hammer, 2/3/4 step logic, partial
opening, fast closing, separate opening and
closing
Compatibility: RIGEL 4
two operators
300W max each operator
• Main features: removable terminal blocks,
programming and diagnostics with display,
incorporated dual channel receiver, plug-in
connector for additional receiver, electric snap
latch or magnetic lock connection, electronic
torque limiter, electronic slowdown during
opening and closing, separate limit switch
inputs for each motor, possibility of traffic-light
management and hydraulic operator pre-heating
with SSR5 board
• Main functions: automatic re-closing, separate
motor working times, stays locked when
closed, water hammer, 2/3/4 step logic, partial
opening, fast closing, separate opening and
closing
• Compatibility: RIGEL 4 110V
B
B
ALTAIR P D113703 00002
ALPHA SD D113680 00002
• Application: control panel for one or two
• Application: control panel for one operator
•
•
•
•
•
operators for swing gates
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
300W max each operator
Main features: removable terminal blocks,
programming with display and built-in dual
channel receiver
Main functions: stays locked when closed, 3/4
step logic, partial opening, fast closing and selfdiagnostics
Compatibility: ALTAIR and ARIES
•
•
•
•
•
B
Accessories
for slide and swing gates, roll-up gates and
overhead doors
Board power supply: 230V single-phase
Operator power supply: 230V single phase
500W max
Main features: removable terminal blocks,
settings controlled by potentiometers, LEDbased fault reporting and incorporated dual
channel receiver
Main functions: fast closing, pulse blocking,
gate open indicator light
Compatibility: MIZAR
B
generic 281
Kit 26
Complete Systems 291
278
A-CTBOARD SW 180
A-CTBOARD SW 200
• Application: control panel for one or two A-180
• Application: control panel for one or two A-200
•
•
• Board power supply: 230V single-phase
• Operators power supply: 24Vdc 48W max each
•
•
SW operators
Board power supply: 230V single-phase
Operators power supply: 24Vdc 48W max each
operator
Main functions: automatic re-closing, partial
opening, pulse blocking, reversing motion
Main features: removable terminal
blocks,programming with dip-switch and push
buttons, incorporated dual channel receiver,
anti-crushing, slowdown during opening and
closing and electronic self-learning, D-TRACK
torque control system
SW operators
operator
• Main functions: automatic closing, partial
opening, impulse blocking, reverse motion
• Main features: removable terminal blocks,
programming with dip-switches and buttons,
incorporated dual channel receiver, anticrushing, slowing
HYDRA N QSG2 D113730 00002
ELBA D113716 00002
• Application: control panel for one or two
• Application: control panel for LOOP type
•
•
• Board power supply: 230V single-phase
• Operator power supply: 230V single phase
•
•
•
overhead garage door operators
Board power supply: 230V single-phase
Operators power supply: 24Vdc 168W max
each operator
Main characteristics: removable terminal blocks,
programming with display and incorporated
dual channel receiver, anti-crushing, slowdown
during opening and closing and electronic selflearning
Main functions: automatic re-closing, fast
closing, pulse blocking, blocking hold
Compatibility: HYDRA, HYDRA R
operator for roller shutters
470W max
• Main features: Extremely compact size for
installation in shutter case, programming
with potentiometers and dip switches, built-in
receiver
• Main functions: separate open/close, photocells
input, possibility of centralised controls,
anemometer and twilight sensor management
• Compatibility: CAPRI, CAPRI RIC, CAPRI TCA
B
B
ELBA BU D113717 00002
LEO B CBB L01 D113767 00002
• Application: control panel for one roll-up door
• Application: control panel for one operator
•
•
• Board power supply: 230V single-phase
• Operator power supply: 230V monophase
•
•
•
operator
Board power supply: 230V single-phase
Operator power supply: 230V single phase
470W max
Main features: Extremely compact size for
installation in shutter case, programming
with potentiometers and dip switches, built-in
receiver, control button on case
Main functions: separate open/close, photocells
input, possibility of centralised controls,
anemometer and twilight sensor management
Compatibility: CAPRI, CAPRI RIC, CAPRI TCA
PEGASO B CJA monophase series
B
Accessories
generic 281
Kit 26
Complete Systems 291
279
LEO B CBB W01 D113768 00002
ALPHA FR QSG2 D113689 00002
• Application: control unit for PEGASO B CJA
• Application: control panel for one operator for
three-phase operators
• Board power supply: 400V three-phase
• Operator power supply: 400V three-phase
industrial sectional doors
• Board power supply: 230V single-phase
• Operator power supply: 230V single phase
500W max
• Main features: START and mushroom-head
emergency buttons incorporated in panel,
settings controlled by potentiometers and LEDbased fault reporting with built-in dual channel
receiver.
• Main functions: fast closing, pulse blocking,
separate opening and gate open indicator light
• Compatibility: MIZAR FR
B
PEG CB UP MONO P111457
PEG CB UP TRI P111458
• Application: control unit with deadman feature
• Application: control unit with deadman feature
for PEGASO single phase operators
• Main features: removable terminal blocks,
management of limit switches and auxiliary
contacts
• Compatibility: PEGASO
for PEGASO three-phase operators
• Main features: removable terminal blocks,
management of limit switches and auxiliary
contacts
• Compatibility: PEGASO TRI
B
B
ELMEC 1 D113612 00001
ELMEC 2 D113613 00001
• Application: control panel for one operator for
• Application: control panel for one operator for
industrial sectional doors
• Board power supply: 230V single-phase
• Operator power supply: 230V single phase
750W max
• Main features: limit switch inputs, semiautomatic or deadman operation, separate
open/close
industrial sectional doors
• Board power supply: 400V three-phase
• Operator power supply: 400V three-phase
750W max
• Main features: limit switch inputs, semi-
automatic or deadman operation, separate
open/close
B
Accessories
B
generic 281
Kit 26
Complete Systems 291
280
PERSEO 2 D113744 00002
PERSEO CBD 230.P SD D113779 00002
• Application: control panel for 1 to 4 STOPPY
• Application: control panel for 1 to 4 STOPPY
•
•
• Board power supply: 230V single phase
• Operators power supply: 230V single phase or
•
•
•
and STOPPY H operators (in parallel)
Board power supply: 230V single-phase
Operators power supply: 230V single-phase
350W max each operator
Main features: removable terminal blocks,
adjustment controlled by potentiometers and
fault signalling LEDs
Main functions: automatic re-closing, separate
opening and closing, preflashing, opening
authorisation, warning lights mode setting
Compatibility: PERSEO
and STOPPY H operators (in parallel)
400V tree-phase
• Main feautures: removable terminal blocks,
programming and diagnostics with display,
plug-in connector for additional receiver, plug-in
connector for handheld programmer PROXIMA
• Main functions: automayic re-closing, separate
opening and closing, preflashing, deadman
feature
• Compatibility: PERSEO 2
B
B
SHEDIR B CBC 02 L01 P111515
PROXIMA BLUE P111465
• Application: wire centralisation board for 1 or 2
• Universal handheld programmer for control
•
•
•
•
tubular motors
Board power supply: 230V single-phase
Operator power supply: 230V 600W max. each
operator
Main characteristics: simplified and compact
wire centralisation system
Functions: control of 1 or 2 motors (or motor
units) in single or simultaneous mode, general
up/down, motor 1 or unit 1 up/down, motor 2 or
unit 2 up/down
units, receivers and remote controls with
BLUETOOTH technology
B
UNIPOWER D121501
PROXIMA P111326
• 12Vdc power supply for Proxima
• Universal handheld programmer for control
units, receivers and remote controls
B
Accessories
B
generic 281
Kit 26
Complete Systems 291
General accessories 281
Accessories for control units
U-BASE P111510
SFQ N999070
Software for bluetooth programming and
managing of control unit, receiver and
transmitters. USB key included
Set of SD and QSG panel fixing brackets
P
SD BOX D223050
CP SD N999369
SD BOX WITH 2 HOLES DIA. 38
Set of cable clamps for SD panel
P
QSG2 D223040
QSG2 ENCLOSURE 8.5x12x5”
Set of batteries for control units
BBV SLC P111503
A-180 SW BAT P135006
Battery powered anti-panic device for
VISTA SL C
Set of backup batteries for A-180 SW
series operators
A-300 SL BAT P125017
MOOVI BAT P120017
Set of backup batteries for A-300 SL
series operators
Set of buffer batteries for MOOVI and
GIOTTO series barriers
C
SB BAT P125002
MCL BAT P125011
SB BAT emergency battery kit for DEIMOS
BT
Set of backup batteries for
MICHELANGELO barriers
C
C
SB BAT 2 P125021
BBV P111442
Set of backup batteries for DEIMOS 300
BT
Set of backup batteries for VISTA SL
C
BT BAT2 P125009
STOPPY BAT P975001
Set of backup batteries for ARES
Set of backup batteries for forcing the
STOPPY to stay in the raised position in
the event of a power cut
C
C
BT BAT P125005
BT BAT1 P125007
Set of backup batteries for LIBRA C MA,
LIBRA C LX, HYDRA N, ARGO
Set of backup batteries for HYDRA N
QSG2
C
C
BBT BAT P125020
CB EOS P125006
Set of backup batteries for THALIA and
THALIA P
Set of backup batteries for VENERE D
C
VIRGO BAT P125008
Set of backup batteries for VIRGO
C
Accessories
generic 281
Kit 26
Complete Systems 291
282
B EBA 201 R01 P111468
ME110 D111501
Expansion board for connection of central
units with serial controls management
ME110 12V
B EBA 201 R02 P111466
ME BT D111761
INPUT/OUTPUT expansion board
Control board for 24Vac solenoid lock for
24V automation systems
B
B
B
B EBA 201 R03 P111467
SPL D113050
Expansion board for WIEGAND accessories
connection management
Pre-heating board with thermostat for
230V hydraulic operators. Not usable with
RIGEL 5
B
B
B EBA 201 R04 P111469
SSR5 D111704
Expansion board for BLUETOOTH
connection management
Board for traffic-light management and
pre-heating 230V hydraulic motors for
RIGEL5
B
B
TLB D113727
SS D111061
Traffic-light management board for
THALIA, THALIA P and LEO CBB.
Gate open indicator light board for ALCOR
N (operating with limit switch)
B
B
RAU P111449
SW NET P121015 00001
Wired connection board for BFT plug-in
receivers
Interface for connecting standard buttons
to FAST NET systems
B
B
FLC 8K2 P111400
SCS 1 P111376
Interface for connecting one or more 8K2
type edges
Serial board for connection to zone and
opposing leaves for control units with
display-While stocks last
G
B
IT23 P111399
SCS 1 MA P111377
Connection interface for CELLULA RFL in
accordance with EN12453 Standard
Board for connection to more than two
checked photocell copies for DEIMOS BT
and ARES-While stocks last
G
B
ME D111013
SCS WIE P111408
Control board for 24Vac solenoid lock for
230V automation systems
Board for connection to SELETTO (E)
keypad and COMPASS SLIM proximity
reader-While stocks last
B
Accessories
B
generic 281
Kit 26
Complete Systems 291
283
Expansion boards
SCS IO P125014
Serial Input Output expansion board-While
stocks last
B
Receivers
CLONIX 4 RTE D113718 00002
RO 2 D111305
External 4-channel 433 MHz rolling code
receiver. Power relay outputs (16A 230v)
Dual channel 30.875 MHz plug-in
receiver.
D
D
CLONIX 2E D113674 00001
RE D111050
External dual channel 433 MHz rolling
code receiver. 128-position memory
Wired connection board for two BFT plugin receivers
D
D
CLONIX 2E 2048 D113674 00003
GSM RECEIVER D113746 00003
Dual channel 433 MHz rolling code plug-in
receiver. 2048-position memory
GSM receiver. Enables the operation of an
automation system with a free phone call
D
D
RTD 2048 D113670 00002
ER 1 P130025
Four-channel rolling code receiver with
2048 codes and built-in programming
display. 230Vac power supply, radio
command block programming
External receiver for LOOP/REEL series
operators. Compatible with TEL 1, TEL 5
and TIMER transmitters
D
D
R2-SMT D111228
MOP D111713 00001
R2-SMT MINI RECEPTOR 2CHANNEL
272MHZ
Accessory for adding an output channel to
RTD
D
AEL 433 D113632
CLONIX 2 D111662
Antenna for 433 Mhz radio remote control
with 4 m cable
Dual channel 433 MHz rolling code plug-in
receiver. 128-position memory
D
D
AEL 30.8 D113631
CLONIX 2 2048 D111664
Antenna for 30.875 Mhz radio remote
control with 4 m cable
Dual channel 433 MHz rolling code plug-in
receiver. 2048-position memory
D
D
Transmitters
KLEIO B RCA02 R1 D111888
KLEIO B RCA02 R3 N999519
12V two-channel transmitter 433MHz
rolling code. Soft touch treatment.
Pack of 100 items, numbered for block
memorisation
12V two-channel transmitter 433MHz
rolling code. Soft touch treatment
KLEIO B RCA02 R2 D111889
KLEIO B RCA04 R1 D111890
12V two-channel transmitter 433MHz,
copyable with rolling code. Soft touch
treatment
Accessories
12V four-channel transmitter 433MHz
rolling code. Soft touch treatment KLEIO
generic 281
Kit 26
Complete Systems 291
284
Transmitters
KLEIO B RCA04 R2 D111891
RB P121016
12V four-channel transmitter 433MHz,
copyable with rolling code. Soft touch
treatment
4-channel wall-mounted radio control with
rolling code
L
PAD RCD 01 R D111909
KLEIO B RCA04 R3 N999520
12V four-channel transmitter 433MHz
rolling code. Soft touch treatment.
Pack of 100 items, numbered for block
memorisation
1-channel remote control for REEL RUA,
LOOP RADIO and ER-1 receiver
PAD RCD 01 F D111911
MITTO B RCB02 R1 D111904
Wall-mounted radio control with rolling
code
12V two-channel transmitter 433MHz
rolling code
PAD RCD 05 R D111910
MITTO B RCB02 R2 D111905
5-channels remote control for REEL RUA,
LOOP RADIO and ER-1 receiver
12V two-channel transmitter 433MHz,
copyable with rolling code
TIMER P130024
MITTO B RCB02 R3 N999542
12V two-channel transmitter 433MHz
rolling code. Pack of 100 items, numbered
for block memorisation
Weekly programmer for LOOP RADIO or
external ER-1 receiver
L
TEL 5 D111829
MITTO B RCB04 R1 D111906
5-channel remote control for LOOP RADIO
and ER-1 receiver
12V four-channel transmitter 433MHz
rolling code
L
TEL FIX P130023
MITTO B RCB04 R2 D111907
Wall-mounted remote control for LOOP
RADIO operator
12V four-channel transmitter 433MHz,
copyable with rolling code
L
TO2 D111302
MITTO B RCB04 R3 N999543
Dual channel 30,875 MHz transmitter
with double code. Can be used for
controlling a shared gate and a private
garage, for example
12V four-channel transmitter 433MHz
rolling code. Pack of 100 items, numbered
for block memorisation
L
CLIP1 B 00 R03 N999522
TO3D D111300
Wall mounting clip for KLEIO B RCA and
MITTO B RCB remote controls. 30 unit
pack
4-channel 30,875 MHz transmitter with
triple code. Can be used for controlling 2
shared gates and 2 private garages, for
example
L
CLIP1 B 00 R03 N999521
TM2 D111054 00001
TM2 TWIN CHANNEL MINIATURE
TRANSM.
GHIBLI D111879
GHIBLI 12V four-channel transmitter 433
MHz
Accessories
generic 281
Kit 26
Complete Systems 291
285
T-BOX P121019
CLC D731022
Wireless digital keypad 433 MHz Rolling
code
Column for magnetic key readers. Height
1m
L
L
RB P121016
SPC D121611
4-channel wall-mounted radio control with
rolling code
External button panel with 2 start-stop
buttons.
L
L
SEK P121017
SPC2 D121612
External key selector switch with vandalproof metal frame
External button panel with 2 open-close
buttons.
L
L
SELETTO P121012
SPC3 D121619
Recessed digital button panel with metal
body and stainless steel keys
Open stop close button panel.
L
L
SELETTO E P121013
SPCE D121613
External digital button panel with metal
body and stainless steel keys
External button panel with mushroomhead emergency button.
L
L
INTRO P121011
BOX N574039
Recessed key switch
Wall-mounted safe for steel cable release
and electric control
L
L
SC NET P121014
SIBOX N574005
Key switch for FAST NET systems
Empty wall-mounted safe for external
release and control keypad Dimensions
179.5 x 122 x 92 mm
L
L
CRC D531097
MOX N733036
Coded replacement key. Specify serial
number of key to be replaced when making
order
External release system to be inserted in
SIBOX safe
L
L
CSC 50 P903008
POX-UP N733103 00001
Aluminium column for photocell mod.
CELLULA 50 and selector mod. INTRO
Two-button panel with indicator light
for SIBOX safe, for direct connection to
operator
P
L
LCM D121011
POX-SC N733103 00002
Magnetic key reader. For column mounting
- see mod. CLC
Two-button panel with indicator light for
SIBOX safe, for connection to control unit
L
L
CM D121012
RME 1 BT P111274
Magnetic key for LCM reader
24Vac single channel metal object detector
with installation base
L
Accessories
L
generic 281
Kit 26
Complete Systems 291
286
Control devices
RME 2 P111001 00003
SPIRA 2X1 D110926 00001
230Vac dual channel metal object detector
with installation base
Magnetic loop 2 x 1 m
L
L
Radar
SEAGLE SLIM ONE P111516
REMOTE CONTROL P111405
Compact mono-directional presence sensor
Remote control for adjusting and setting
FALCON, EAGLE ONE and ACTIVE8
Q
SEAGLE SLIM TWO P111517
SPOTFINDER P111406
Compact bi-directional presence sensor
IR curtain detector
Q
SEAGLE TWO P111404
FALCON P111407
Bi-directional presence sensor
Industrial presence sensor installable up
to 7 m
Q
Q
EAGLE ONE P111403
IRIS ON C SL P111518
Mono-directional presence sensor. Needs
REMOTE CONTROL for programming
Infrared double courtain safety sensor
ACTIVE8 TWO PB P111402 00001
RIP P111325
Safety and presence sensor
Multi-function active infrared radar, wide/
narrow range
Q
Q
Q
Signalling devices
RADIUS B LTA 230 R1 D113748 00002
B 00 R01 P123026
Flashing beacon with built-in antenna for
230V motors
Metal guard for B LTA
I
I
RADIUS B LTA 230 R2 D113749 00002
B 00 R02 P123025
Flashing beacon without built-in antenna
for 230V motors
Wall mounting for B LTA series flashing
beacons
I
I
RADIUS B LTA 24 R1 D113748 00003
IPNOS B LTC 24 R1 FAST NET D113769
Flashing beacon with built-in antenna for
24V motors
Fast Net led blinker with connection fitting
for radio module
RADIUS B LTA 24 R2 D113749 00003
CMS D831081
Flashing beacon without built-in antenna
for 24V motors
Sign
I
I
Accessories
P
generic 281
Kit 26
Complete Systems 291
287
A-CELLULA FLX P111464
CELLULA 180 P111452
Pair of orientable photocells
(180°horiz./20°vert.) For external
application (range 30 m). Power supply
24V ac/dc
Pair of A-CELLULA FLX flashing photocells
for ALISEO series operators
E
E
A-CC FLX P903017
KIT CELLULA 180 AT P111460
Pair of aluminium posts for A-CELLULA
FLX photocells
KIT CELLULA 180 + DCW COVER
CELLULA 130 P111273
DCW COVER P111454
Pair of self-aligning photocells for external
application (range 30 m) Power supply
24V ac/dc
Anodised aluminium cover for DCW and
CELLULA180
E
F
PRO 130 P111081
CC DCW P903016
Anodised aluminium vandal-proof guard for
CELLULA 130
Pair of aluminium posts and guards for
DCW and CELLULA180
E
P
CC130 P903005
DCW BAT N999465
Pair of aluminium posts for CELLULA 130
photocells
Pack of 12 batteries for DCW photocell
safety edge
P
F
CC130/2 P903006
FL NET P111382
Pair of aluminium posts with double fitting
for CELLULA 130 photocells
Pair of FL NET photocells Dip switch bus
addressing
P
E
CSC 130 P903007
CELLULA RFL P111391
Aluminium post for CELLULA 130
photocell and INTRO selector, plus CC130
post
Reflective photocell for external application
(range 12 m) Power supply 24V ac/dc
(requires S RFLP P111409)
P
E
CELLULA 50 P111272
IT23 P111399
Pair of built-in adjustable photocells (range
30 m) Power supply 24V ac
Connection interface for CELLULA RFL in
accordance with EN12453 Standard
E
G
CC50 P903004
S RFLP P111409
Reflector and support for wall mounting
and mounting on CC post for CELLULA
RFL
Pair of aluminium posts for CELLULA 50
and CELLULA RFL photocells
P
E
CSC 50 P903008
CC RFL P903013
Aluminium column for photocell mod.
CELLULA 50 and selector mod. INTRO
CELLULA RFL and S RFLP mounting
support on CC posts
P
P
TANGO B DSB 430 B01 P111512
CM RFL P903014
Wireless photocell with possibility of
managing infrared or resistive safety edge
CELLULA RFL wall mounting support
P
Accessories
generic 281
Kit 26
Complete Systems 291
288
Safety devices - Photocells and accessories
CCI D221573
FL130 P111043 0001
Recessed container for CELLULA 50 and
INTRO.
Pair of self-aligning photocells, range up to
25 m, power supply 24Vac/dc
P
E
PFC1 P903010
PT130 P111058
Pair of foundation plates for CC50, CC130,
CSC50, CSC130 and CC130/2 posts
PROTECTION COVER FOR FL130B
P
Safety devices - Sensitive edges
TANGO B DSB 430 B01 P111512
FLCP 2 P111059 00001
Wireless photocell with possibility of
managing infrared or resistive safety edge
Infrared obstacle detection device for
safety edge CI, BIR C, BAR C and BAR C
BA
G
STR N190106
FLEXY 6 D141160
Pair of infrared sensors for DCW
6x0.5 sq mm extensible spiral cable for
industrial sectional doors. Max. extension
6m
G
G
DCW BAT N999465
PRC P111041
Pack of 12 batteries for DCW photocell
safety edge
Pneumatic relay for BIR edge with 1
pressure switch
F
G
VENTIMIGLIA NS P111401 00001
PRC2 P111042
Infrared device for BIR C or BAR C safety
edges (conforms to EN 12978 Standard)
Pneumatic relay for BAR edge with 2
pressure switches
G
G
Rubber profiles
BIR C N190104
BAR C 6 P111450 00006
Rubber safety edge (H 30 mm), price per
m
Double profile rubber safety edge (L 6000
x H 60 mm)
G
G
TB D221074
BAR C BA 2 P111451 00002
Plug for BIR C
Double profile rubber safety edge with lip
seals (L 2000 x H 60 mm)
G
G
BAR C 2 P111450 00002
BAR C BA 4 P111451 00004
Double profile rubber safety edge (L 2000
x H 60 mm)
Double profile rubber safety edge with lip
seals (L 4000 x H 60 mm)
G
G
BAR C 4 P111450 00004
BAR C BA 6 P111451 00006
Double profile rubber safety edge (L 4000
x H 60 mm)
Double profile rubber safety edge with lip
seals (L 6000 x H 60 mm)
G
Accessories
G
generic 281
Kit 26
Complete Systems 291
289
Rubber profiles
CM1000 P111050
CM5000 P111056
Mechanical safety edge, length 1 m
Mechanical safety edge, length 5 m
G
G
CM1500 P111051
CSP 10 N190039
Mechanical safety edge, length 1.5 m
Rubber shock absorber profile length 1000
mm
G
G
CM1700 P111052
CSP 20 N190040
Mechanical safety edge, length 1.7 m
Rubber shock absorber profile length
2000 mm
G
G
CM2000 P111053
CSP 25 N190041
Mechanical safety edge, length 2 m
Rubber shock absorber profile length
2500 mm
G
G
CM3000 P111054
TA N999025
Mechanical safety edge, length 3 m
TA TAPPI BAR
G
CM4000 P111055
Mechanical safety edge, length 4 m
G
Solenoid locks
EBP P123001 00001
ECB SX D121017
230Vac electric drop lock
Left-hand horizontal solenoid lock, 12-24V
P
P
EBP 24 P123001 00013
ECB VERTICALE D121018
24Vac solenoid lock, with 230/24V
transformer installable in control panel
Vertical solenoid lock, 12-24V
P
P
EBPE 52 P123006 00001
EBPE 52 24V P123006 00013
230Vac solenoid lock with zero stop
resistance, also with release from outside
for gates of max thickness 50 mm
EBPE 52 24V with transformer
EBPE 75 P123008 00001
EBP 120 P123001 00004
230Vac solenoid lock with zero stop
resistance, also with release from outside
for gates of max thickness 75 mm
Drop electric lock + transf. 24/120V 60Hz
P
P
EBP24 120 P123001 00019
ECB DX D121016
Right-hand horizontal solenoid lock, 1224V
Drop electric lock + transf. 24/120V 60Hz
P
Accessories
generic 281
Kit 26
Complete Systems 291
290
Release systems
SCP N733502
SM2 P115001
Release for ELI 250 and SUB BT with
personalized key.
External manual release for overhead
garage door (2 operators)
P
SCC N733392
ST P115003
Release for ELI 250N and SUB BT with
lever key.
Automatic bolt release for sectional doors
0
P
SCT N733189
SEB N733020
Release for ELI 250 and SUB BT with
personalized key.
External key release for BERMA, FORB,
IGEA LB and IGEA LB BTì
P
BOX N574039
SET/S N733069
Wall-mounted safe for steel cable release
and electric control
External release for insulated sectional and
overhead doors of thickness up to 50 mm.
SET/S
L
P
SIBOX N574005
RCA N733421
Empty wall-mounted safe for external
release and control keypad Dimensions
179.5 x 122 x 92 mm
Lever release for ARGO with steel cable,
length 3.5 m
MOX N733036
RCAL N733422
External release system to be inserted in
SIBOX safe
Lever release for ARGO with steel cable,
length 7 m
CLS/82 D610256
CRC SPARE KEY D531097 00001
Triangular release key for SUB operators
l=82mm
CRC SPARE KEY
L
L
P
SPARE KEY FOR KEY KNOB D531548
CLS D610180
SPARE KEY FOR KEY KNOB
Triangular release key l=52mm
P
SM1 P115005
External manual release for overhead
garage door (1 operator)
P
Accessories
generic 281
Kit 26
Complete Systems 291