series grm clamps - Coast Pneumatics

Transcription

ua
ir
e
SERIES GRM CLAMPS
pn
e
GREATER CLAMPING FORCES
Flexibility, Durability, Low Cost
PATENT PENDING
GRM05A
1
(800) 624-8511
GRM05
www.phdinc.com/clamps
ua
ir
e
JAW STYLES: SERIES GRM CLAMPS
Standard
Designed for sheet metal handling in stamping/fabricating press applications.
Single Chisel
Narrow chisel jaw designed for limited room for lower jaw.
Double Chisel
Designed for limited jaw room in die for lower jaw.
Single Shovel
Narrow shovel jaw. Ideal for limited lower jaw clearance in sheet metal handling, such
as blank loading and sheet separation applications.
Double Shovel
Double shovel lower jaw. Ideal for limited lower jaw clearance in sheet metal
handling, such as blank loading and sheet separation applications.
Single Flat Shovel
Designed for narrow applications that require the clamp bottom to be totally flat,
with no jaw swing through.
Double Flat Shovel
Designed for applications that require the clamp bottom to be totally flat, no jaw
swing through like the L jaw style, but with additional width on the lower jaw.
Flange
pn
e
Designed to reach over flanges.
Needlenose
Designed for sheet metal handling when there is limited access to panel. Works well
in servo rail served presses. This clamp does not use interchangeable tips.
Hammerhead
Designed for sheet metal handling where there is limited access to panel. Works well
with servo rail served presses. This clamp does not use interchangeable tips.
Hook
Short overall length ideal for clamping applications where length is critical. Saves
space between the rails.
Toolable
Designed for use where high grip force is required. Available with finger blanks for
custom tooling. Provides a large jaw opening to accommodate difficult to clamp panels
such as those with large flanges or domes.
2
© Copyright 2003, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.
(800) 624-8511
GRM05
ua
ir
e
APPLICATION SOLUTION: SERIES GRM CLAMPS
INDEX:
Jaw Styles
Page 2
PHD Series GRM Clamps are used in this typical material
handling application for the automotive/metal stamping
press. Four clamps are used at each “stamping station”
inside the press. The clamps grab onto the material
as the transfer rails lift and advance the sheet
to each stage of the forming process.
The Series GRM Clamp is ideal due
to the locking jaw mechanism,
which prevents dropping of
the part during transfer.
Application Solution
Page 3
Unit Views
Pages 4 to 7
Jaw Styles S, C, D, H, & J
Ordering Data & Benefits
Pages 8 and 9
Dimensions & Jaw
Rotations
Standard Jaw Style S
Pages 10 to 13
Single Chisel Jaw Style C
Pages 14 to 17
Double Chisel Jaw Style D
Pages 18 to 21
Series GRM Clamps
Single Shovel Jaw Style H
Pages 22 and 23
Double Shovel Jaw Style J
Pages 24 and 25
Flat Shovels Jaw Styles L & M
Pages 26 to 31
Flange Jaw Style F
Pages 32 to 37
pn
e
Needlenose & Hammerhead
Jaw Styles N & P
Pages 38 to 43
Hook Jaw Style K
Pages 44 to 47
Toolable Jaw Style G
Pages 48 to 55
Engineering Data
Pages 56 and 57
Tip Mounting
Pages 58 to 60
Tip Dimensions
Page 61
Mounting Threads
Dimensions
Page 62
Mounting Bracket Dimensions
Pages 63 to 67
Port Fitting Option Dimensions
Page 68
3
(800) 624-8511
GRM05
UNIT VIEWS: SERIES GRM CLAMPS - SIZE 2
ua
ir
e
STANDARD (S)
75°
45°
JAW A
JAW A
JAW B
JAW B
JAW A
JAW B
22°
45°
75°
75°
45°
22°
JAW A
JAW A
JAW A
JAW B
JAW B
JAW B
0°
0°
0°
75°
SINGLE OR DOUBLE CHISEL (C or D)
22°
45°
22°
JAW A
JAW A
JAW B
JAW B
JAW A
JAW B
22°
45°
75°
75°
45°
JAW A
pn
e
75°
45°
JAW A
22°
JAW A
JAW B
SINGLE OR DOUBLE
FLAT SHOVEL (L or M)
0°
85°
JAW A
4
(800) 624-8511
GRM05
JAW A
JAW B
JAW B
0°
0°
45°
22°
JAW A
JAW A
JAW B
0°
JAW B
0°
0°
0°
JAW A
JAW B
JAW B
SINGLE OR DOUBLE
SHOVEL (H or J)
22°
JAW A
JAW B
0°
JAW B
0°
ua
ir
e
FLANGE (F)
85°
50°
50°
JAW A
JAW A
JAW A
0°
JAW B
0°
JAW B
22° JAW B
75°
CHISEL DIAMOND POINT (N OR P)
45°
JAW A
JAW A
JAW B
JAW B
22°
JAW A
JAW B
22°
45°
75°
75°
45°
JAW B
0°
HOOK (K)
pn
e
0°
22°
JAW A
JAW A
JAW A
JAW B
0°
JAW B
50°
50°
25°
40°
JAW B
20°
JAW A
JAW B
TOOLABLE (G)
40°
0°
JAW B
JAW A
JAW A
40°
22°
JAW A
JAW A
JAW A
JAW B
JAW B
JAW B
40°
22°
0°
5
(800) 624-8511
GRM05
ua
ir
e
75°
45°
STANDARD (S)
JAW A
JAW B
JAW B
75°
22°
45°
0°
22°
JAW A
JAW B
0°
75°
JAW B
JAW A
0°
45°
JAW A
pn
e
0°
JAW B
85°
50°
JAW A
JAW A
JAW B
0°
6
(800) 624-8511
GRM05
0° JAW B
JAW B
22°
JAW A
JAW A
JAW B
0°
FLANGE (F)
JAW B
45°
75°
JAW A
JAW A
JAW A
SINGLE OR DOUBLE SHOVEL (H or J)
22°
0°
JAW B
ua
ir
e
40°
JAW A
JAW A
JAW B
JAW B
70°
JAW A
JAW B
22°
40°
70°
40°
JAW A
0°
22°
JAW A
0°
JAW B
JAW B
pn
e
TOOLABLE (G)
70°
7
(800) 624-8511
GRM05
GRM
(See Notes 3 & 4)
JAW B
JAW OPENING - JAW A
00 22 45 75 -
0° Opening
22-1/2° Opening
45° Opening
75° Opening
(See Note 1)
2 S S - 2 - 75 DDB - 75 DDB - LAA
MOUNTING
T - Rear Mounting Threads (Standard)
C - 90° Spherical Mounting Bracket
R - Non-Spherical Mounting Bracket
SIDE
S - Spherical Mounting Bracket
W- Oversize Spherical Mounting Bracket
A - Rear Spherical Mounting Bracket
REAR B - Oversize Rear Spherical Mtg Bracket
P - Rear Mounting Plate
DESIGN NO.
2 - Imperial
6 - Metric
(See Note 2)
JAW OPENING - JAW B
00 - 0° Opening
22 - 22-1/2° Opening
45 - 45° Opening
75 - 75° Opening
(See Note 1)
ne
GRM05
ua
ir
UNIT SIZE
2 - 32 mm Short
4 - 40 mm Long
JAW STYLE OPTION
S - Standard Jaw
(to accept Tip Options)
C - Single Chisel Point
D - Double Chisel Point
H - Single Shovel Point
J - Double Shovel Point
JAW TIP OPTIONS - JAW A
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm 4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
Single Diamond Point
SDB
SDS
SDG
Double Diamond Point
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
(See Note 6)
NOTES:
1) The 0° jaw rotates open no greater than 3° during the clamp cycle. The 0° jaw returns to
0° position as the opposing jaw reaches the fully open and fully closed position.
2) Metric units have metric ports and mounting. Imperial units have imperial ports and mounting.
3) C & D jaw styles are available only on GRM size 2.
4) H & J jaw styles are available only on the following jaw combinations: 75xxx-00, 45xxx-00,
22xxx-00, 00-75xxx, 00-45xxx, 00-22xxx
5) See the Series GRM Clamp Accessories Catalog for non-standard mounting options.
6) Cone point against cone point tip combinations are not allowed due to point overlap.
JAW TIP OPTIONS - JAW B
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm 4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
(See Note 6)
GRM CLAMP
JAW STYLE
OPTION
S ONLY
JAW
B
0
22
45
75
GRM CLAMP
JAW STYLE
OPTION
C & D ONLY
JAW
B
0
22
45
75
GRM CLAMP
JAW STYLE
OPTION
H & J ONLY
JAW
B
0
22
45
75
JAW A
0
NO
YES
YES
YES
22
YES
YES
NO
NO
45
YES
NO
YES
NO
75
YES
NO
NO
YES
JAW A
0
NO
YES
YES
YES
22
YES
YES
NO
NO
45
YES
NO
YES
NO
75
YES
NO
NO
YES
JAW A
0
NO
YES
YES
YES
22
YES
NO
NO
NO
45
YES
NO
NO
NO
75
YES
NO
NO
NO
PORT FITTINGS
BLANK - No Fitting
LAA - 90° Swivel Elbow, Metal
LBB - 90° Swivel Elbow, Plastic
GRM2xx
CLOSE
OPEN
GRM4xx
OPEN
CLOSE
ORDERING DATA: GRM CLAMP JAW STYLES “S, C, D, H & J”
8
(800) 624-8511
JAW A
TO ORDER SPECIFY:
Size, Mounting, Jaw Style Option, Design No., Jaw Opening
(A & B), Jaw Tip Option (A & B), and Fitting Option if desired.
ua
ir
e
BENEFITS: GRM CLAMP JAW STYLES “S, C, D, H & J”
By changing the
location of the stop
block, jaw openings
can be set to 22.5°,
45°, or 75°.
Optional Port
Fittings
Non-Spherical
Mounting Bracket
Flange Clamps
Rear Mounting Plate
Spherical
Mounting Bracket
Rear Spherical
Mounting Bracket
Chisel Point Clamps
A wide variety of color
coded tips are available
for flexibility in
clamping different
material thicknesses.
BENEFITS
Simple design, long life, high clamp force, and fast field
maintenance make these clamps ideal for sheet metal handling.
pn
e
■
■
Available in two sizes, six jaw styles, and 24 jaw openings to fit
a wide range of clamping applications.
■
Compact envelope size and high clamp force. Series GRM size
2 generates up to 225 lb [1000 N] of clamp force. The Series
GRM size 4 generates up to 500 lb [2224 N] of clamp force for
maximum flexibility and performance.
■
Six modular designed jaw tips are offered for maximum
clamping performance in a variety of applications.
■
The jaws of the Series GRM Clamp lock in the closed position
ensuring part retention if air pressure is lost due to line rupture
or power loss.
■
Available with fixed or spherical mounting brackets for side or
rear mounting.
■
Two adjustable hardened steel impact plates eliminate damage
from panel impact.
■
Fully field repairable in just 10 minutes, using metric hex
wrenches.
■
Wide and deep throats accommodate difficult clamping
applications.
■
For additional mounting, jaw, switch, and tip options, see the
Series GRM Clamp Accessories Catalog.
■
Consult factory for material thickness greater than 4 mm.
SPECIFICATIONS
WORKING PRESSURE
BODY
JAWS
SEALS
LUBRICATION
JAW STYLES S, C, D, H & J
30 psi min. - 100 psi max.
[2 bar min. - 7 bar max.]
Hardcoat Aluminum
Hardened Steel
Bidirectional Piston Seal
Lip Type Rod Seal
Permanent for Non-Lube Air
9
(800) 624-8511
GRM05
DIMENSIONS: STANDARD JAW STYLE “S” - SIZES 2 & 4
B3
B4
(CLOSED)
M1
JAW PIVOT
J7
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F3
F4
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J7
J8
J16 (PARALLEL)
P1
P2
P3
M1
T1**
J8
F1 (ADJUSTABLE)
JAW A
J2
B1 P3
P1
J1
(CLOSED)
J16
F3
(PARALLEL)
J3
JAW B
P2
2X 1/8 NPT
[1/8 BSP] PORT
2X M8 x 1.25 THREAD
(THRU BOTH JAWS)
B2
MODEL NUMBER
GRM4xS
GRM2xS
in
mm
in
mm
2.176
55.3
1.910
48.5
1.980
50.3
1.654
42.0
1.338
34.0
.827
21.0
8.799
223.5
6.437
163.5
2.126
54.0
1.496
38.0
1.286
32.7
.985
25.0
5.120
130.0
3.602
91.5
2.190
55.6
1.864
47.3
2.662
67.6
2.336
59.3
4.724
120.0
3.314
84.2
1.360
34.5
.866
22.0
.755
19.18
.755
19.18
.785
19.94
.630
16.00
1.136
28.9
.906
23.0
2.815
71.5
2.146
54.5
.492
12.5
.472
12.0
1.584
40.2
1.074
27.3
.700
17.8
.650
16.5
.452
11.5
1.575
40.0
1.772
45.0
1.300
33.0
6.969
177.0
5.138
130.5
1.850
47.0
1.530
38.9
ua
ir
e
GRM2xS-x-xxxxx-xxxxx
GRM4xS-x-xxxxx-xxxxx
J4 J5 T1
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
** T1 IS THE LARGEST TIP AVAILABLE.
F4
F5
NOTE:
SEE TIP DIMENSION AND MOUNTING BRACKET PAGES.
PORT LOCATION
GRM4xx UNITS ONLY
P1
P2
2X 1/8 NPT
[1/8 BSP] PORT
P3
PARTS BREAKDOWN
PART NUMBER
KEY
1
4
3
pn
e
11A
18
12
17
13
15
2
16
5B
1
5A
8
7
14
6
10
9
7
8
11B
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
DESCRIPTION
BODY ASSEMBLY -imperial
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
KIT NUMBER
GRM2xS
KIT DESCRIPTION
GRM4xS
63967-02
64638-02
IMPACT PLATE KIT
62152-01
62152-02
JAW REBUILD KIT
63965-02
63965-04
SEAL KIT
63966-02
63966-04
FASTENER KIT
NOTE: SEE MOUNTING BRACKET KIT PAGE.
All dimensions are reference only unless specifically toleranced.
10
(800) 624-8511
GRM05
GRM2xS
63947-11
63947-12
63949
61467
57618-034
63952-02
63952-02
63950
62097
62099-01
52416-009
62176-01
63954-02
63954-02
63962-02
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
GRM4xS
64627-11
64627-12
64631
61468
57618-042
64636-02
64636-02
63969
62098
62100
52416-027
62177-01
63975-02
63975-02
64635-02
59104-118
59104-114
62221-001
59842-013-1
56902-009-9
3642-028-1
JAW ROTATION DIMENSIONS: STANDARD JAW STYLE “S”
ua
ir
e
GRM2xS-x-75xxx-75xxx
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
T2
STOP BLOCK NOT REQUIRED
75° Both Jaws Rotate
MODEL NUMBER
GRM4xS
GRM2xS
in
mm
in
mm
4.437 112.7
6.567 166.8
5.444 138.3
6.894 175.1
3.453
87.7
4.620 117.3
NOTE:
THE STOP BLOCK MOUNTING SCREW IS EXTRA LONG
AND MUST BE USED TO MOUNT STOP BLOCK IN ANY
LOCATION ON BODY OR JAWS.
JAW
PIVOT
T2
IF THIS EXTRA LONG SCREW IS ASSEMBLED INTO THE
IMPACT PLATE WITHOUT THE STOP BLOCK, IT WILL
HIT AND DAMAGE THE JAWS.
J1
(OPEN)
B4
(OPEN)
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
S1
T2
ONE STOP BLOCK REQUIRED
STOP BLOCK LOCATION
S1
HEX
MODEL NUMBER
GRM4xS
GRM2xS
in
mm
in
mm
5.545 140.8
7.712 195.9
4.805 122.0
6.370 161.8
.197
5.0
.197
5.0
2.584
65.6
3.522
89.5
ASSEMBLE STOP BLOCK IN THIS SLOT
FOR GRMxxS-x-45xxx-45xxx UNITS
JAW
PIVOT
T2
J1
(OPEN)
STOP BLOCK
JAW
pn
e
STOP BLOCK
SHCS
B4
(OPEN)
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
S1
T2
STOP BLOCK LOCATION
S1
HEX
JAW
PIVOT
T2
TIGHTEN TO
125 in-lb [14.1 Nm]
URETHANE PAD ORIENTED
TOWARD JAW CAM SLOT
MODEL NUMBER
GRM4xS
GRM2xS
in
mm
in
mm
6.101
155.0 8.420
213.9
3.933
99.9
5.615
142.6
.197
5.0
.197
5.0
1.401
35.6
1.904
48.4
J1
(OPEN)
B4
(OPEN)
JAW
STOP BLOCK
STOP BLOCK
SHCS
TOWARD JAW CAM SLOT
TIGHTEN TO
125 in-lb [14.1 Nm]
11
(800) 624-8511
GRM05
DIMENSIONS: STANDARD JAW STYLE “S” - SIZES 2 & 4
B4
(CLOSED)
M1
JAW PIVOT
J6
(CLOSED)
B3
J7
J8
JAW A
J1
(CLOSED)
J16
(PARALLEL)
J2
B1 P3
J3
P1
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F3
F4
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J16 (PARALLEL)
P1
P2
P3
M1
S2***
T1**
F1
(ADJUSTABLE)
F3
S2
MAX
JAW B
P2
2X 1/8 NPT
[1/8 BSP] PORT
2X M8 x 1.25 THREAD
(THRU BOTH JAWS)
J4 J5 T1
B2
F4
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
***S2 DIMENSION OCCURS ON 22°-00° ONLY.
F5
NOTES:
1) SEE TIP DIMENSION AND MOUNTING BRACKET PAGES.
2) THE 0° JAW ROTATES 3° DURING THE CLAMP CYCLE,
OPENING THE END OF THE JAW .079 [2.0]. THE JAW
RETURNS TO THE 0° POSITION AS THE OPPOSING JAW
REACHES FULL OPEN OR CLOSED.
PORT LOCATION
GRM4xx UNITS ONLY
P1
P2
2X 1/8 NPT
[1/8 BSP] PORT
P3
PARTS BREAKDOWN
PART NUMBER
KEY
1
pn
e
4
MODEL NUMBER
GRM4xS
GRM2xS
in
mm
in
mm
2.176
55.3
1.910
48.5
1.980
50.3
1.654
42.0
1.338
34.0
.827
21.0
8.799
223.5
6.437
163.5
2.126
54.0
1.496
38.0
1.286
32.7
.985
25.0
2.560
65.0
1.801
45.7
2.190
55.6
1.864
47.3
2.662
67.6
2.336
59.3
3.532
89.7
2.579
65.5
1.360
34.5
.866
22.0
.755
19.18
.755
19.18
.785
19.94
.630
16.00
1.136
28.9
.906
23.0
2.362
60.0
1.657
42.1
2.815
71.5
2.146
54.5
.492
12.5
.472
12.0
1.584
40.2
1.074
27.3
.388
9.9
.650
16.5
.452
11.5
1.575
40.0
1.772
45.0
1.300
33.0
6.969
177.0
5.138
130.5
2.850
72.4
2.071
52.6
1.850
47.0
1.530
38.9
ua
ir
e
GRM2xS-x-xxxxx-00xxx
GRM4xS-x-xxxxx-00xxx
11A
3
18
12
17
13
15
2
16
5A
5B
1
14
7
10
8
6
9
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
7
KIT NUMBER
8
11B
12
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
(800) 624-8511
GRM05
GRM2xS
63967-01
62152-01
63965-02
63966-02
GRM2xS
63947-11
63947-12
63949
61467
57618-034
63952-01
63952-01
63950
62097
62099-01
52416-009
62176-01
63954-02
63953-02
63962-03
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
GRM4xS
64638-01
62152-02
63965-04
63966-04
GRM4xS
64627-11
64627-12
64631
61468
57618-042
64636-01
64636-01
63969
62098
62100
52416-027
62177-01
63975-02
63976-02
64635-03
59104-118
59104-114
62221-001
59842-013-1
56902-009-9
3642-028-1
JAW ROTATION DIMENSIONS: STANDARD JAW STYLE “S”
ua
ir
e
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15 (OPEN)
T2
75° Jaw A Rotates
J6
(OPEN)
JAW PIVOT
T2
NOTE:
THE STOP BLOCK MOUNTING SCREW IS EXTRA LONG AND
MUST BE USED TO MOUNT STOP BLOCK IN ANY LOCATION
ON BODY OR JAWS.
J1
(OPEN)
IMPACT PLATE WITHOUT THE STOP BLOCK, IT WILL HIT
AND DAMAGE THE JAWS.
J14
J15
(OPEN)
MODEL NUMBER
GRM4xS
GRM2xS
in
mm
in
mm
6.437
163.5
8.799
223.5
3.642
92.5
4.617
117.3
2.720
69.1
3.447
87.6
.922
23.4
1.170
29.7
1.864
47.3
2.542
64.6
1.729
43.9
2.308
58.6
B4
(OPEN)
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15 (OPEN)
S1
T2
45° Jaw A Rotates
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
JAW PIVOT
MODEL NUMBER
GRM2xS
GRM4xS
in
mm
in
mm
6.437
163.5 8.799
223.5
4.355
3.324
84.4
110.6
3.185
2.402
61.0
80.9
1.170
.922
23.4
29.7
2.095
1.495
38.0
53.2
.197
.197
5.0
5.0
1.773
1.294
32.9
45.0
J1
T2 (OPEN)
STOP BLOCK
JAW
STOP BLOCK
SHCS
J14
pn
e
J15
(OPEN)
B4
(OPEN)
URETHANE PAD ORIENTED TOWARD
JAW CAM SLOT AS SHOWN
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15 (OPEN)
S1
T2
22° Jaw A Rotates
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
JAW PIVOT
J15
(OPEN)
T2
TIGHTEN TO
125 in-lb [14.1 Nm]
MODEL NUMBER
GRM2xS
GRM4xS
in
mm
in
mm
6.437
163.5
8.799
223.5
2.888
73.4
3.977
101.0
1.966
49.9
2.807
71.3
.922
23.4
1.170
29.7
1.088
27.6
1.481
37.6
.197
5.0
.197
5.0
.702
17.8
.950
24.1
J1
(OPEN)
STOP BLOCK
JAW
J14
B4
(OPEN)
STOP BLOCK
SHCS
TIGHTEN TO
125 in-lb [14.1 Nm]
13
(800) 624-8511
GRM05
DIMENSIONS: SINGLE CHISEL JAW STYLE “C” - SIZE 2
B3
ua
ir
e
GRM2xC-x-xxxxx-xx
B4
(CLOSED)
M1
J7
JAW PIVOT
J6
(CLOSED)
F3
J8
F1
(ADJUSTABLE)
JAW A
J2
B1 P3
P1
J16
(PARALLEL)
JAW B
P2
J1
(CLOSED)
J3
2X 1/8 NPT
[1/8 BSP] PORT
M8 x 1.25 THREAD THRU
(JAW A ONLY)
J4 J5 T1
B2
F4
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
(JAW A ONLY)
J9
(JAW B)
F5
MODEL NUMBER
GRM2xC
in
mm
1.910
48.5
1.654
42.0
.827
21.0
6.437
163.5
1.496
38.0
.985
25.0
1.801
45.7
1.864
47.3
2.336
59.3
2.782
70.7
.866
22.0
.755
19.18
.630
16.00
.906
23.0
1.657
42.1
2.146
54.5
.472
12.0
.800
20.3
.557
14.1
.650
16.5
1.575
40.0
1.300
33.0
5.138
130.5
1.530
38.9
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F3
F4
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J9
J16 (PARALLEL)
P1
P2
P3
M1
T1**
NOTE:
SEE TIP DIMENSION AND MOUNTING
BRACKET PAGES.
PARTS BREAKDOWN
PART NUMBER
KEY
1
4
3
11A
18
12
pn
e
17
13
15
2
16
5B
1
5A
14
8
7
10
6
9
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
7
8
11B
KIT NUMBER
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
(800) 624-8511
GRM05
GRM2xC
63967-01
62152-01
63965-02
63966-02
14
GRM2xC
63947-11
63947-12
63949
61467
57618-034
63952-01
63952-01
63950
62097
62099-01
52416-009
62176-01
63954-02
63957-02
63962-02
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
JAW ROTATION DIMENSIONS: SINGLE CHISEL JAW STYLE “C”
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
T2
T3
J6
(OPEN)
MODEL NUMBER
GRM2xC
in
mm
4.479
113.8
5.257
133.5
2.720
69.1
3.466
88.0
1.740
44.2
ua
ir
e
GRM2xC-x-75xxx-75
NOTE:
THE STOP BLOCK MOUNTING SCREW IS
EXTRA LONG AND MUST BE USED TO
MOUNT STOP BLOCK IN ANY LOCATION
ON BODY OR JAWS.
JAW PIVOT
T2
IF THIS EXTRA LONG SCREW IS
ASSEMBLED INTO THE IMPACT PLATE
WITHOUT THE STOP BLOCK, IT WILL HIT
J1
(OPEN)
T3
B4
(OPEN)
GRM2xC-x-45xxx-45
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
T2
T3
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
MODEL NUMBER
GRM2xC
in
mm
5.644
143.4
4.303
109.3
2.402
61.0
.197
5.0
2.569
65.2
1.278
32.5
FOR GRMxxC-x-45xxx-45 UNITS
JAW PIVOT
J1
T2 (OPEN)
STOP BLOCK
JAW
STOP BLOCK
SHCS
T3
pn
e
B4
(OPEN)
TOWARD JAW CAM SLOT
AS SHOWN
TIGHTEN TO
125 in-lb [14.1 Nm]
GRM2xC-x-22xxx-22
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
T2
T3
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
J1
T2 (OPEN)
JAW PIVOT
JAW
T3
B4
(OPEN)
MODEL NUMBER
GRM2xC
in
mm
6.219
158.0
3.100
78.7
1.966
49.9
.197
5.0
1.395
35.4
.695
17.7
STOP BLOCK
STOP BLOCK
SHCS
TOWARD JAW CAM SLOT
AS SHOWN
TIGHTEN TO
125 in-lb [14.1 Nm]
15
(800) 624-8511
GRM05
DIMENSIONS: SINGLE CHISEL JAW STYLE “C” - SIZE 2
MODEL NUMBER
LETTER
GRM2xC
DIM
in
mm
B1
1.910
48.5
B2
1.654
42.0
B3
.827
21.0
B4 (CLOSED)
6.437
163.5
F1 MAX
1.496
38.0
F1 MIN
.985
25.0
F3
1.801
45.7
F4
1.864
47.3
F5
2.336
59.3
J1 (CLOSED)
2.579
65.5
J2 (CLOSED)
.866
22.0
J3*
.755
19.18
J4*
.630
16.00
J5
.906
23.0
J6 (CLOSED)
1.657
42.1
J7
2.146
54.5
J8
.472
12.0
J9
.800
20.3
J16 (PARALLEL)
.557
14.1
P1
.650
16.5
P2
1.575
40.0
P3
1.300
33.0
M1
5.138
130.5
S2***
2.071
52.6
T1**
1.530
38.9
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
(JAW A ONLY)
NOTES:
1) SEE TIP DIMENSION AND MOUNTING
BRACKET PAGES.
2) THE 0° JAW ROTATES 3° DURING THE CLAMP
CYCLE, OPENING THE END OF THE JAW .079
[2.0]. THE JAW RETURNS TO THE 0° POSITION
AS THE OPPOSING JAW REACHES FULL OPEN
OR CLOSED.
ua
ir
e
GRM2xC-x-xxxxx-00
B4
(CLOSED)
B3
M1
JAW PIVOT
J6
(CLOSED)
S2
MAX
F3
J7
J8
F1
(ADJUSTABLE)
JAW A
J1
(CLOSED)
J2
J3
B1 P3
P1
J16
(PARALLEL)
JAW B
2X 1/8 NPT
[1/8 BSP] PORT
P2
B2
(JAW A ONLY)
J4
F4
J5 T1
J9
(JAW B)
F5
PARTS BREAKDOWN
PART NUMBER
KEY
1
4
11A
pn
e
3
18
12
17
13
15
2
5B
16
1
5A
14
8
7
10
6
9
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
7
8
11B
KIT NUMBER
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
(800) 624-8511
GRM05
GRM2xC
63967-01
62152-01
63965-02
63966-02
16
GRM2xC
63947-11
63947-12
63949
61467
57618-034
63952-01
63952-01
63950
62097
62099-01
52416-009
62176-01
63954-02
63955-02
63962-03
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
JAW ROTATION DIMENSIONS: SINGLE CHISEL JAW STYLE “C”
ua
ir
e
GRM2xC-x-75xxx-00
MODEL NUMBER
LETTER
GRM2xC
DIM
in
mm
B4 (OPEN)
6.437 163.5
J1 (OPEN)
3.642
92.5
J6 (OPEN)
2.720
69.1
J15 (OPEN)
1.864
47.3
T2
1.733
44.0
NOTE:
EXTRA LONG AND MUST BE USED TO
MOUNT STOP BLOCK IN ANY LOCATION ON
BODY OR JAWS.
75° Jaw A Rotates
J6
(OPEN)
JAW PIVOT
T2
J1
(OPEN)
IF THIS EXTRA LONG SCREW IS ASSEMBLED
INTO THE IMPACT PLATE WITHOUT THE
STOP BLOCK, IT WILL HIT AND DAMAGE
THE JAWS.
J15
(OPEN)
B4
(OPEN)
GRM2xC-x-45xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (OPEN)
S1
T2
45° Jaw A Rotates
STOP BLOCK LOCATION
MODEL NUMBER
GRM2xC
in
mm
6.437 163.5
3.324
84.4
2.402
61.0
1.495
38.0
.197
5.0
1.299
33.0
S1
HEX
J6
(OPEN)
JAW PIVOT
T2
J1
(OPEN)
STOP BLOCK
JAW
J15
(OPEN)
STOP BLOCK
SHCS
pn
e
B4
(OPEN)
GRM2xC-x-22xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (0PEN)
S1
T2
22° Jaw A Rotates
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
MODEL NUMBER
GRM2xC
in
mm
6.437
163.5
2.888
73.4
1.966
49.9
1.088
27.6
.197
5.0
.707
18.0
J1
JAW PIVOT T2
(OPEN)
J15
(OPEN)
TIGHTEN TO
125 in-lb [14.1 Nm]
STOP BLOCK
JAW
STOP BLOCK
SHCS
B4
(OPEN)
TIGHTEN TO
125 in-lb [14.1 Nm]
17
(800) 624-8511
GRM05
DIMENSIONS: DOUBLE CHISEL JAW STYLE “D” - SIZE 2
ua
ir
e
GRM2xD-x-xxxxx-xx
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F3
F4
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J9
J16 (PARALLEL)
P1
P2
P3
M1
T1**
B4
(CLOSED)
B3
M1
J8
J7
JAW PIVOT
J6
(CLOSED)
F3
F1
(ADJUSTABLE)
JAW A
J2
B1 P3
P1
J16
(PARALLEL)
JAW B
P2
J1
(CLOSED)
J3
2X 1/8 NPT
[1/8 BSP] PORT
(JAW A ONLY)
J4
B2
F4
J5
T1
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
(JAW A ONLY)
J9
(JAW B)
F5
MODEL NUMBER
GRM2xD
in
mm
1.910
48.5
1.654
42.0
.827
21.0
6.437 163.5
1.496
38.0
.985
25.0
1.801
45.7
1.864
47.3
2.336
59.3
2.782
70.7
.866
22.0
.755
19.18
.630
16.00
.906
23.0
1.657
42.1
2.146
54.5
.472
12.0
1.500
38.1
.557
14.1
.650
16.5
1.575
40.0
1.300
33.0
5.138 130.5
1.530
38.9
NOTE:
SEE TIP DIMENSION AND MOUNTING BRACKET
PAGES.
PARTS BREAKDOWN
PART NUMBER
KEY
1
4
11A
3
pn
e
18
12
17
13
15
2
16
5B
1
5A
14
8
7
10
8
6
9
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
KIT NUMBER
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
(800) 624-8511
GRM05
GRM2xD
63967-01
62152-01
63965-02
63966-02
GRM2xD
63947-11
63947-12
63949
61467
57618-034
63952-01
63952-01
63950
62097
62099-01
52416-009
62176-01
63954-02
63958-02
63962-02
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
7
11B
18
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
JAW ROTATION DIMENSIONS: DOUBLE CHISEL JAW STYLE “D”
ua
ir
e
GRM2xD-x-75xxx-75
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
T2
T3
J6
(OPEN)
NOTE:
THE STOP BLOCK MOUNTING SCREW IS EXTRA
LONG AND MUST BE USED TO MOUNT STOP
BLOCK IN ANY LOCATION ON BODY OR JAWS.
JAW PIVOT
T2
MODEL NUMBER
GRM2xD
in
mm
4.479 113.8
5.257 133.5
2.720
69.1
3.466
88.0
1.740
44.2
J1
(OPEN)
INTO THE IMPACT PLATE WITHOUT THE STOP
BLOCK, IT WILL HIT AND DAMAGE THE JAWS.
T3
B4
(OPEN)
GRM2xD-x-45xxx-45
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
T2
T3
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
MODEL NUMBER
GRM2xD
in
mm
5.644 143.4
4.303 109.3
2.402
61.0
.197
5.0
2.569
65.2
1.278
32.5
FOR GRMxxD-x-45xxx-45 UNITS
JAW PIVOT
J1
T2 (OPEN)
STOP BLOCK
JAW
T3
pn
e
STOP BLOCK
SHCS
B4
(OPEN)
TIGHTEN TO
125 in-lb [14.1 Nm]
TOWARD JAW CAM SLOT
GRM2xD-x-22xxx-22
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
T2
T3
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
J1
T2 (OPEN)
JAW PIVOT
MODEL NUMBER
GRM2xD
in
mm
6.219 158.0
3.100 78.7
1.966 49.9
.197
5.0
1.395 35.4
.695
17.7
JAW
STOP BLOCK
T3
STOP BLOCK
SHCS
B4
(OPEN)
TOWARD JAW CAM SLOT
TIGHTEN TO
125 in-lb [14.1 Nm]
19
(800) 624-8511
GRM05
DIMENSIONS: DOUBLE CHISEL JAW STYLE “D” - SIZE 2
MODEL NUMBER
LETTER
GRM2xD
DIM
in
mm
B1
1.910
48.5
B2
1.654
42.0
B3
.827
21.0
B4 (CLOSED)
6.437
163.5
F1 MAX
1.496
38.0
F1 MIN
.985
25.0
F3
1.801
45.7
F4
1.864
47.3
F5
2.336
59.3
J1 (CLOSED)
2.579
65.5
J2 (CLOSED)
.866
22.0
J3*
.755
19.18
J4*
.630
16.00
J5
.906
23.0
J6 (CLOSED)
1.657
42.1
J7
2.146
54.5
J8
.472
12.0
J9
1.500
38.1
J16 (PARALLEL)
.557
14.1
P1
.650
16.5
P2
1.575
40.0
P3
1.300
33.0
M1
5.138
130.5
S2***
2.071
52.6
T1**
1.530
38.9
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
(JAW A ONLY)
NOTES:
1) SEE TIP DIMENSION AND MOUNTING
BRACKET PAGES.
2) THE 0° JAW ROTATES 3° DURING THE CLAMP
CYCLE, OPENING THE END OF THE JAW .079
[2.0]. THE JAW RETURNS TO THE 0° POSITION
AS THE OPPOSING JAW REACHES FULL OPEN
OR CLOSED.
ua
ir
e
GRM2xD-x-xxxxx-00
B4
(CLOSED)
B3
M1
J7
JAW PIVOT
J6
(CLOSED)
F3
S2
MAX
J8
F1
(ADJUSTABLE)
JAW A
J2
B1 P3
P1
J16
(PARALLEL)
JAW B
P2
J1
(CLOSED)
J3
2X 1/8 NPT
[1/8 BSP] PORT
(JAW A ONLY)
B2
J4
F4
J5
T1
J9
(JAW B)
F5
PARTS BREAKDOWN
PART NUMBER
KEY
1
4
11A
pn
e
3
18
12
17
13
15
2
16
5B
1
5A
14
8
7
10
6
9
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
GRM2xD
63947-11
63947-12
63949
61467
57618-034
63952-01
63952-01
63950
62097
62099-01
52416-009
62176-01
63954-02
63956-02
63962-03
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
7
KIT NUMBER
8
11B
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
20
(800) 624-8511
GRM05
GRM2xD
63967-01
62152-01
63965-02
63966-02
JAW ROTATION DIMENSIONS: DOUBLE CHISEL JAW STYLE “D”
MODEL NUMBER
GRM2xD
in
mm
6.437 163.5
3.642
92.5
2.720
69.1
1.864
47.3
1.733
44.0
ua
ir
e
GRM2xD-x-75xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (OPEN)
T2
75° Jaw A Rotates
J6
(OPEN)
JAW PIVOT
T2
NOTE:
EXTRA LONG AND MUST BE USED TO MOUNT
STOP BLOCK IN ANY LOCATION ON BODY OR
JAWS.
J1
(OPEN)
INTO THE IMPACT PLATE WITHOUT THE STOP
BLOCK, IT WILL HIT AND DAMAGE THE JAWS.
J15
(OPEN)
B4
(OPEN)
GRM2xD-x-45xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (OPEN)
S1
T2
45° Jaw A Rotates
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
JAW PIVOT
T2
MODEL NUMBER
GRM2xD
in
mm
6.437 163.5
3.324
84.4
2.402
61.0
1.495
38.0
.197
5.0
1.299
33.0
J1
(OPEN)
STOP BLOCK
JAW
STOP BLOCK
SHCS
J15
(OPEN)
pn
e
B4
(OPEN)
GRM2xD-x-22xxx-00
TIGHTEN TO
125 in-lb [14.1 Nm]
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (0PEN)
S1
T2
22° Jaw A Rotates
STOP BLOCK LOCATION
MODEL NUMBER
GRM2xD
in
mm
6.437
163.5
2.888
73.4
1.966
49.9
1.088
27.6
.197
5.0
.707
18.0
S1
HEX
J6
(OPEN)
J1
JAW PIVOT T2
(OPEN)
J15
(OPEN)
STOP BLOCK
JAW
STOP BLOCK
SHCS
B4
(OPEN)
TIGHTEN TO
125 in-lb [14.1 Nm]
21
(800) 624-8511
GRM05
DIMENSIONS: SINGLE SHOVEL JAW STYLE “H” - SIZES 2 & 4
B4
(CLOSED)
M1
B3
JAW PIVOT
J7
J8
J6
(CLOSED)
S2
(MAX)
F1
(ADJUSTABLE)
F3
JAW A
J1
(CLOSED)
J2
B1
J3
P3
P1
JAW B
2X 1/8 NPT
[1/8 BSP] PORT
P2
J14
J16
(PARALLEL)
B5
(CLOSED)
(JAW A ONLY)
B2
J4 J5 T1
J9
(JAW B)
F4
P1
MODEL NUMBER
GRM2xH
GRM4xH
in
mm
in
mm
1.910 48.5
2.176
55.3
1.654 42.0
1.980
50.3
.827
21.0
1.338
34.0
6.437 163.5
8.799 223.5
6.820 173.2
9.429 239.5
1.496 38.0
2.126
54.0
.985
25.0
1.286
32.7
1.801 45.7
2.560
65.0
1.864 47.3
2.190
55.6
2.336 59.3
2.662
67.6
2.579 65.5
3.532
89.7
.866
22.0
1.360
34.5
.755 19.18
.755
19.18
.630 16.00
.785
19.94
.906
23.0
1.136
28.9
1.657 42.1
2.362
60.0
2.146 54.5
2.815
71.5
.472
12.0
.492
12.5
.630
16.0
.785
19.9
.922
23.4
1.170
29.7
1.007 25.6
1.584
40.2
.650
16.5
.388
9.9
1.575 40.0
.452
11.5
1.300 33.0
1.772
45.0
5.138 130.5
6.969 177.0
2.071 52.6
2.850
72.4
1.530 38.9
1.850
47.0
ua
ir
e
GRM2xH-x-xxxxx-00
GRM4xH-x-xxxxx-00
* TOLERANCE FOR J3 & J4 = ± .003 [± .076] (JAW A ONLY)
NOTES:
2) THE 0° JAW ROTATES 1.7° DURING THE CLAMP CYCLE,
F5
PORT LOCATION
GRM4xx UNITS ONLY
2X 1/8 NPT
[1/8 BSP] PORT
P3
P2
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
B5 (CLOSED)
F1 MAX
F1 MIN
F3
F4
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J9
J14
J16 (PARALLEL)
P1
P2
P3
M1
S2***
T1**
PARTS BREAKDOWN
PART NUMBER
KEY
1
4
pn
e
3
18
11A
12
17
13
15
2
16
5B
1
8
5A
14
7
10
7
8
11B
6
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
GRM2xH
DESCRIPTION
GRM4xH
BODY ASSEMBLY -imperial 63947-11
64627-11
63947-12
-metric
64627-12
63949
PISTON & SHOCK PAD
64631
61467
BORE PLUG
61468
57618-034
RETAINING RING
57618-042
63952-01
IMPACT PLATE
64636-01
63952-01
IMPACT PLATE
64636-01
63950
ROD/JAW DRIVER
63969
62097
JAW BUSHING
62098
62099-01
SLIDER BUSHING
62100
52416-009
ROD/JAW DRIVER PIN
52416-027
62176-01
PIVOT PIN
62177-01
63954-02
JAW (A)
63975-02
65233-01
JAW (B)
63977-02
63962-03
STOP BLOCK
64635-03
59104-118
STOP BLOCK SHCS
59104-118
59104-114
IMPACT PLATE SHCS
59104-114
59104-600
PISTON SFHCS
62221-001
59842-009-1 59842-013-1
ROD SEAL
56902-008-9 56902-009-9
PISTON SEAL
3642-027-1 3642-028-1
BORE PLUG SEAL
9
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
22
(800) 624-8511
KIT NUMBER
GRM2xH GRM4xH
63967-01 64638-01
62152-01 62152-02
63965-02 63965-04
63966-02 63966-04
GRM05
JAW ROTATION DIMENSIONS: SINGLE SHOVEL JAW STYLE “H”
ua
ir
e
GRM2xH-x-75xxx-00
GRM4xH-x-75xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15
T2
75° Jaw A Rotates
J6
(OPEN)
JAW PIVOT
J1
(OPEN)
T2
NOTE:
J14
J15
(OPEN)
MODEL NUMBER
GRM2xH
GRM4xH
in
mm
in
mm
6.820 173.2
9.429 239.5
3.606
4.617 117.3
91.6
2.684
87.6
3.447
68.2
.922
29.7
1.170
23.4
1.804
64.6
2.542
45.8
1.961
67.9
2.675
49.8
B4
(OPEN)
GRM2xH-x-45xxx-00
GRM4xH-x-45xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15 (OPEN)
S1
T2
45° Jaw A Rotates
STOP BLOCK LOCATION
J6
(OPEN)
S1
HEX
FOR GRMxxH-x-45xxx-00 UNITS
J1
(OPEN)
JAW PIVOT
MODEL NUMBER
GRM2xH
GRM4xH
mm
in
mm
in
6.820 173.2
9.429 239.5
84.4
3.324
4.355 110.6
61.0
2.402
80.9
3.185
23.4
.922
29.7
1.170
38.0
1.495
53.2
2.095
5.0
.197
5.0
.197
36.5
1.438
49.0
1.929
T2
STOP BLOCK
STOP BLOCK
SHCS
pn
e
J15
(OPEN)
J14
B4
(OPEN)
GRM2xH-x-22xxx-00
GRM4xH-x-22xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15 (OPEN)
S1
T2
22° Jaw A Rotates
STOP BLOCK LOCATION
JAW PIVOT
S1
HEX
J6
(OPEN)
J1
(OPEN)
T2
J15
(OPEN)
TIGHTEN TO
125 in-lb [14.1 Nm]
MODEL NUMBER
GRM2xH
GRM4xH
in
mm
in
mm
6.820 173.2
9.429 239.5
2.888
3.977 101.0
73.4
1.966
71.3
2.807
49.9
.922
29.7
1.170
23.4
1.088
37.6
1.481
27.6
.197
5.0
.197
5.0
.747
25.5
1.003
19.0
FOR GRMxxH-x-22xxx-00 UNITS
STOP BLOCK
J14
STOP BLOCK
SHCS
B4
(OPEN)
TIGHTEN TO
125 in-lb [14.1 Nm]
23
(800) 624-8511
GRM05
DIMENSIONS: DOUBLE SHOVEL JAW STYLE “J” - SIZES 2 & 4
B4
(CLOSED)
M1
B3
JAW PIVOT
J7
J8
J6
(CLOSED)
S2
(MAX)
F1
(ADJUSTABLE)
F3
JAW A
J1
(CLOSED)
J2
B1
J3
P3
P1
JAW B
2X 1/8 NPT
[1/8 BSP] PORT
P2
J14
J16
(PARALLEL)
B5
(CLOSED)
(JAW A ONLY)
B2
J4
T1
J5
F4
P1
J9
(JAW B)
F5
PORT LOCATION
GRM4xx UNITS ONLY
2X 1/8 NPT
[1/8 BSP] PORT
P3
P2
PARTS BREAKDOWN
4
KEY
1
3
11A
pn
e
18
MODEL NUMBER
GRM2xJ
LETTER
GRM4xJ
in
DIM
in
mm
mm
1.910 48.5
B1
2.176
55.3
1.654 42.0
B2
1.980
50.3
.827
B3
1.338
34.0
21.0
6.437 163.5
B4 (CLOSED)
8.799 223.5
6.820 173.2
B5 (CLOSED)
9.429 239.5
1.496 38.0
F1 MAX
2.126
54.0
.985
F1 MIN
1.286
32.7
25.0
1.801 45.7
F3
2.560
65.0
1.864 47.3
F4
2.190
55.6
2.336 59.3
F5
2.662
67.6
2.579 65.5
J1 (CLOSED)
3.532
89.7
.866
J2 (CLOSED)
1.360
34.5
22.0
.755 19.18
J3*
.755
19.18
.630 16.00
J4*
.785
19.94
.906
J5
1.136
28.9
23.0
1.657 42.1
J6 (CLOSED)
2.362
60.0
2.146 54.5
J7
2.815
71.5
.472
J8
.492
12.5
12.0
1.500 38.1
J9
1.850
47.0
.922
J14
1.170
29.7
23.4
1.007 25.6
J16 (PARALLEL)
1.342
34.1
.650
P1
.388
9.9
16.5
1.575 40.0
P2
.452
11.5
1.300 33.0
P3
1.772
45.0
5.138 130.5
M1
6.969 177.0
2.071 52.6
S2***
2.850
72.4
1.530 38.9
T1**
1.850
47.0
* TOLERANCE FOR J3 & J4 = ± .003 [± .076] (JAW A ONLY)
NOTES:
2) THE 0° JAW ROTATES 1.7° DURING THE CLAMP CYCLE,
ua
ir
e
GRM2xJ-x-xxxxx-00
GRM4xJ-x-xxxxx-00
12
17
13
15
2
16
5B
1
8
5A
14
7
10
6
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
PART NUMBER
GRM2xJ
DESCRIPTION
GRM4xJ
BODY ASSEMBLY -imperial 63947-11
64627-11
63947-12
-metric
64627-12
63949
PISTON & SHOCK PAD
64631
61467
BORE PLUG
61468
57618-034
RETAINING RING
57618-042
63952-01
IMPACT PLATE
64636-01
63952-01
IMPACT PLATE
64636-01
63950
ROD/JAW DRIVER
63969
62097
JAW BUSHING
62098
62099-01
SLIDER BUSHING
62100
52416-009
ROD/JAW DRIVER PIN
52416-027
62176-01
PIVOT PIN
62177-01
63954-02
JAW (A)
63975-02
65234-01
JAW (B)
63978-02
63962-03
STOP BLOCK
64635-03
59104-118
STOP BLOCK SHCS
59104-118
59104-114
IMPACT PLATE SHCS
59104-114
59104-600
PISTON SFHCS
62221-001
59842-009-1 59842-013-1
ROD SEAL
56902-008-9 56902-009-9
PISTON SEAL
3642-027-1 3642-028-1
BORE PLUG SEAL
9
7
8
11B
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
24
(800) 624-8511
GRM05
KIT NUMBER
GRM2xJ
GRM4xJ
63967-01
64638-01
62152-01
62152-02
63965-02
63965-04
63966-02
63966-04
JAW ROTATION DIMENSIONS: DOUBLE SHOVEL JAW STYLE “J”
MODEL NUMBER
GRM2xJ
LETTER
GRM4xJ
in
mm
DIM
in
mm
6.820 173.2 9.429 239.5
B4 (OPEN)
3.606
J1 (OPEN)
4.617 117.3
91.6
2.684
87.6
J6 (OPEN)
3.447
68.2
.922
29.7
J14
1.170
23.4
1.804
64.6
J15
2.542
45.8
1.961
67.9
T2
2.675
49.8
NOTE:
ua
ir
e
GRM2xJ-x-75xxx-00
GRM4xJ-x-75xxx-00
75° Jaw A Rotates
J6
(OPEN)
JAW PIVOT
J1
(OPEN)
T2
J14
J15
(OPEN)
B4
(OPEN)
GRM2xJ-x-45xxx-00
GRM4xJ-x-45xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15 (OPEN)
S1
T2
45° Jaw A Rotates
STOP BLOCK LOCATION
J6
(OPEN)
S1
HEX
FOR GRMxxJ-x-45xxx-00 UNITS
J1
(OPEN)
JAW PIVOT
MODEL NUMBER
GRM2xJ
GRM4xJ
in
mm
in
mm
6.820 173.2
9.429 239.5
3.324
4.355 110.6
84.4
2.402
80.9
3.185
61.0
.922
29.7
1.170
23.4
1.495
53.2
2.095
38.0
.197
5.0
.197
5.0
1.438
49.0
1.929
36.5
T2
STOP BLOCK
J14
J15
(OPEN)
STOP BLOCK
SHCS
pn
e
B4
(OPEN)
GRM2xJ-x-22xxx-00
GRM4xJ-x-22xxx-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J14
J15 (OPEN)
S1
T2
22° Jaw A Rotates
STOP BLOCK LOCATION
JAW PIVOT
S1
HEX
J6
(OPEN)
J15
(OPEN)
J1
(OPEN)
T2
TIGHTEN TO
125 in-lb [14.1 Nm]
MODEL NUMBER
GRM2xJ
GRM4xJ
in
mm
in
mm
6.820 173.2
9.429 239.5
2.888
3.977 101.0
73.4
1.966
71.3
2.807
49.9
.922
29.7
1.170
23.4
1.088
37.6
1.481
27.6
.197
5.0
.197
5.0
.747
25.5
1.003
19.0
FOR GRMxxJ-x-22xxx-00 UNITS
STOP BLOCK
J14
B4
(OPEN)
STOP BLOCK
SHCS
TIGHTEN TO
125 in-lb [14.1 Nm]
25
(800) 624-8511
GRM05
ua
ir
GRM CLAMP JAW
JAW A
STYLE OPTION
L & M STYLES ONLY 22 45 85
JAW B
UNIT SIZE
2 - 32 mm Short
JAW OPENING - JAW A
22 - 22.5° Opening
45 - 45° Opening
85 - 85° Opening
(See Note 1)
JAW A
JAW B
JAW OPENING - JAW B
00 - 0° Opening
(See Note 1)
2 S M - 2 - 85 DCB - 00 - LAA
MOUNTING
T - Rear M6 Mounting Threads
SIDE
REAR
B - Oversize Rear Spherical Mtg Bracket
DESIGN NO.
2 - Imperial
6 - Metric
(See Note 2)
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm 4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
ne
GRM05
GRM
JAW STYLE OPTION
L - Single Flat Shovel Clamp
M - Double Flat Shovel Clamp
0 YES YES YES
NOTES:
1) See chart for available jaw combinations.
2) Metric units have metric ports and mounting.
PORT FITTINGS
BLANK - No Fitting
CLOSE
OPEN
ORDERING DATA: GRM CLAMP JAW STYLES “L & M”
26
(800) 624-8511
TO ORDER SPECIFY:
Size, Mounting, Jaw Style Option, Design No., Jaw Opening
(A & B), Jaw Tip Option (A & B), and Fitting Option if desired.
BENEFITS
ua
ir
e
BENEFITS: GRM CLAMP JAW STYLES “L & M”
■
Small profile makes these clamps ideal for clamping in very
tight openings.
■
Available in two jaw styles and three openings.
■
Simple design, long life, high grip force, and fast field
maintenance make these units ideal for sheet metal handling.
■
Compact envelope size with up to 225 lb [1000 N] of grip force
for maximum flexibility and performance.
■
Jaws lock in closed position ensuring part retention even when
air pressure is removed.
■
rear mounting.
■
Two adjustable-hardened steel impact plates eliminate damage
from panel impact.
■
Designed for 5 million trouble-free cycles.
■
Fully field repairable in less than 10 minutes using metric hex
wrenches.
■
Single Flat Shovel
“L” Jaw Style
Double Flat Shovel
“M” Jaw Style
SPECIFICATIONS
WORKING PRESSURE
pn
e
BODY
JAWS
SEALS
LUBRICATION
JAW STYLES L & M
Hardcoat Aluminum
Hardened Steel
Lip Type Rod Seal
JAW A
JAW B
Moving jaw does not extend below clamp when open, allowing
for minimal clearance.
27
(800) 624-8511
GRM05
DIMENSIONS: SINGLE FLAT SHOVEL JAW STYLE “L” - SIZE 2
B4
(CLOSED)
M1
JAW PIVOT
B3
MP1
J7
J8
F1 (ADJUSTABLE)
4X THRU HOLE
FOR MP3 SHCS
MT1
MP2
J6
(CLOSED)
JAW A
F3
MT2
J2
B1
J10
JAW B
P1
P2
MT3 LOCKING THREAD
MT4 DEEP MIN
4 PLACES
J1
(CLOSED)
J9
J3
B6
2X 1/8 NPT
[1/8 BSP] PORT
B5
(CLOSED)
MP4
J16 (PARALLEL)
(JAW A ONLY)
B2
J4
F4
J5
T1
J11
F5
P2
P1
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
NOTE: SEE TIP DIMENSION PAGE FOR OTHER TIP WIDTHS
3
KEY
1
11A
pn
e
18
15
17
14
16
2
1
5A
5B
10
8
14
9
7
7
6
19
13
12
11B
20
21
8
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
19
20
21
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK PIN
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
JAW MOUNTING PIN
JAW MOUNTING SHCS
JAW MTG SOCKET SET SCREW
(800) 624-8511
GRM05
GRM2xL
73059-01
73059-02
63949
61467
57618-034
63952-01
63952-01
73061-01
62097
62099-01
52416-059
62176-02
73062-01
73064-01
73065-01
17831-003
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
17831-009
59104-115
17424-103
KIT NUMBER
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
28
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
B5 (CLOSED)
B6
F1 MAX
F1 MIN
F3
F4
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J9
J10
J11
J16 (PARALLEL)
P1
P2
M1
MP1
MP2
MP3
MP4
MT1
MT2
MT3
MT4
T1**
PART NUMBER
PARTS BREAKDOWN
4
MODEL NUMBER
GRM2xL
mm
in
50.8
2.000
69.9
2.750
24.9
.980
171.3
6.745
179.5
7.065
26.5
1.045
29.1
1.145
15.8
.623
45.7
1.801
51.8
2.041
63.8
2.513
53.1
2.090
13.0
.510
19.18
.755
16.00
.630
25.0
.986
25.7
1.010
60.6
2.384
12.6
.496
15.2
.600
12.2
.480
1.0
.039
13.7
.540
6.9
.270
8.0
.315
133.8
5.269
57.0
2.244
35.1
1.380
M6
1/4
15.7
.620
28.5
1.122
35.5
1.398
M6 x 1.0
10.7
.420
38.9
1.530
ua
ir
e
GRM2xL-x-xxxxx-00
GRM2xL
63967-01
62152-07
63965-02
63966-06
JAW ROTATION DIMENSIONS: JAW STYLE “L”
ua
ir
e
GRM2xL-x-85xxx-00
(STOP BLOCK & STOP BLOCK PIN SHIPPED WITH UNIT)
JAW PIVOT
LETTER
DIM
B5 (OPEN)
J1 (OPEN)
J6 (OPEN)
J11
J14
T2
J6
(OPEN)
T2
MODEL NUMBER
GRM2xL
in
mm
7.065 179.5
4.498 114.2
3.418 86.8
.039
1.0
1.080 27.4
3.085 78.4
J1
(OPEN)
STOP BLOCK
J14
STOP BLOCK
PIN
J11
B5
(OPEN)
GRM2xL-x-45xxx-00
LETTER
DIM
B5 (OPEN)
J1 (OPEN)
J6 (OPEN)
J11
J14
T2
JAW PIVOT
J6
(OPEN)
ASSEMBLE STOP BLOCK IN THIS HOLE
FOR GRM2xL-x-45xxx-00 UNITS
J1
(OPEN)
T2
MODEL NUMBER
GRM2xL
in
mm
7.065 179.5
3.442 87.4
2.362 60.0
.039
1.0
1.080 27.4
1.806 45.9
J14
STOP BLOCK LOCATION
JAW
J11
STOP BLOCK
B5
(OPEN)
pn
e
STOP BLOCK
PIN
AS SHOWN
GRM2xL-x-22xxx-00
LETTER
DIM
B5 (OPEN)
J1 (OPEN)
J6 (OPEN)
J11
J14
T2
JAW PIVOT
J6
T2 (OPEN)
MODEL NUMBER
GRM2xL
mm
in
7.065 179.5
2.795 71.0
1.715 43.6
1.0
.039
1.080 27.4
22.4
.883
FOR GRM2xL-x-22xxx-00 UNITS
J1
(OPEN)
J14
STOP BLOCK
LOCATION
J11
STOP BLOCK
JAW
B5
(OPEN)
STOP BLOCK
PIN
AS SHOWN
29
(800) 624-8511
GRM05
DIMENSIONS: DOUBLE FLAT SHOVEL JAW STYLE “M” - SIZE 2
B4
(CLOSED)
M1
JAW PIVOT
B3
MP1
J7
J8
F1
(ADJUSTABLE)
J6
(CLOSED)
4X THRU HOLE
FOR MP3 SHCS
MT1
JAW A
F3
MT2
MP2
J2
B1
J3
B6
J9
JAW B
MT3 LOCKING THREAD
MT4 DEEP MIN
4 PLACES
J1
(CLOSED)
J10
2X 1/8 NPT
[1/8 BSP] PORT
P1
P2
B5
(CLOSED)
J16 (PARALLEL)
MP4
M8 X 1.25 THREAD THRU
(JAW A ONLY)
J4 T1
B2
F4
J5
F5
P2
P1
J11
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
NOTE: SEE TIP DIMENSION PAGE FOR OTHER TIP WIDTHS
3
KEY
1
11A
pn
e
18
15
17
14
16
2
1
5A
10
8
14
5B
9
7
7
19
13
12
11B
20
30
21
6
8
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
19
20
21
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK PIN
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
JAW MOUNTING PIN
JAW MOUNTING SHCS
JAW MTG SOCKET SET SCREW
(800) 624-8511
GRM05
GRM2xM
73059-01
73059-02
63949
61467
57618-034
63952-01
63952-01
73061-01
62097
62099-01
52416-059
62176-02
73062-01
73063-01
73065-01
17831-003
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
17831-009
59104-115
17424-103
KIT NUMBER
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
B5 (CLOSED)
B6
F1 MAX
F1 MIN
F3
F4
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J9
J10
J11
J16 (PARALLEL)
P1
P2
M1
MP1
MP2
MP3
MP4
MT1
MT2
MT3
MT4
T1**
PART NUMBER
PARTS BREAKDOWN
4
MODEL NUMBER
GRM2xM
in
mm
2.000
50.8
2.750
69.9
.980
24.9
6.745
171.3
7.065
179.5
1.045
26.5
1.145
29.1
.623
15.8
1.801
45.7
2.041
51.8
2.513
63.8
2.090
53.1
.510
13.0
.755
19.18
.630
16.00
1.750
44.5
1.010
25.7
2.384
60.6
.496
12.6
.600
15.2
.480
12.2
.039
1.0
.540
13.7
.270
6.9
.315
8.0
5.269
133.8
2.244
57.0
1.380
35.1
1/4
M6
.620
15.7
1.122
28.5
1.398
35.5
M6 x 1.0
.420
10.7
1.530
38.9
ua
ir
e
GRM2xM-x-xxxxx-00
GRM2xM
63967-01
62152-07
63965-02
63966-06
JAW ROTATION DIMENSIONS: JAW STYLE “M”
ua
ir
e
GRM2xM-x-85xxx-00
(STOP BLOCK & STOP BLOCK PIN SHIPPED WITH UNIT)
JAW PIVOT
J6
(OPEN)
T2
MODEL NUMBER
GRM2xM
mm
in
7.065 179.5
4.498 114.2
3.418 86.8
1.0
.039
1.080 27.4
3.085 78.4
LETTER
DIM
B5 (OPEN)
J1 (OPEN)
J6 (OPEN)
J11
J14
T2
J1
(OPEN)
STOP BLOCK
J14
STOP BLOCK
PIN
J11
B5
(OPEN)
GRM2xM-x-45xxx-00
LETTER
DIM
B5 (OPEN)
J1 (OPEN)
J6 (OPEN)
J11
J14
T2
JAW PIVOT
J6
(OPEN)
T2
J1
(OPEN)
MODEL NUMBER
GRM2xM
in
mm
7.065 179.5
3.442 87.4
2.362 60.0
.039
1.0
1.080 27.4
1.806 45.9
FOR GRM2xM-x-45xxx-00 UNITS
J14
STOP BLOCK LOCATION
JAW
J11
STOP BLOCK
B5
(OPEN)
pn
e
STOP BLOCK
PIN
AS SHOWN
GRM2xM-x-22xxx-00
LETTER
DIM
B5 (OPEN)
J1 (OPEN)
J6 (OPEN)
J11
J14
T2
JAW PIVOT
T2
J6
(OPEN)
J1
(OPEN)
MODEL NUMBER
GRM2xM
mm
in
7.065 179.5
2.795 71.0
1.715 43.6
1.0
.039
1.080 27.4
22.4
.883
FOR GRM2xM-x-22xxx-00 UNITS
J14
J11
STOP BLOCK
LOCATION
JAW
STOP BLOCK
B5
(OPEN)
STOP BLOCK
PIN
AS SHOWN
31
(800) 624-8511
GRM05
JAW B
SIZE 2
GRM CLAMP
JAW STYLE
OPTION
F ONLY
JAW
B
SIZE 4
JAW A
50 85
0 YES YES
22 YES NO
UNIT SIZE
2 - 32 mm Short
4 - 40 mm
GRM CLAMP
JAW STYLE
OPTION
F ONLY
JAW B
0 to
.85 mm
No tip
Blank
Single Cone Point
SCB
Double Cone Point
DCB
SDB
DDB
Single Urethane Pad
SUB
Double Urethane Pad
DUB
JAW A
50 85
0 YES YES
JAW STYLE OPTION
F - Flange Jaw
JAW TIP OPTIONS
JAW B
No tip
Single Cone Point
Single Urethane Pad
Double Urethane Pad
0 to
.85 mm
Blank
SCB
SDB
DDB
SUB
DUB
.86 to
1.2 mm
Blank
SCS
DCS
SDS
DDS
SUB
DUB
Material Thickness
2.3 to
1.95 to
1.21 to 1.53 to
1.52 mm 1.94 mm 2.29 mm 2.6 mm
Blank
Blank
Blank
Blank
SCG
SCG
SCS
SCG
DCG
DCG
DCS
DCG
SDG
SDG
SDS
SDG
DDG
DDG
DDS
DDG
SUB
SUB
SUB
SUB
DUB
DUB
DUB
DUB
(See note 6)
2.61 to
3.0 mm
Blank
—
—
—
—
SUB
DUB
Material Thickness
.86 to
1.21 to 1.53 to 1.95 to
2.3 to 2.61 to
1.2 mm 1.52 mm 1.94 mm 2.29 mm 2.6 mm 3.0 mm
Blank
Blank
Blank
Blank
Blank
Blank
SCB
SCB
SCS
SCS
SCG
SCG
SDB
SDB
SDS
SDS
SDG
SDG
DDB
DDB
DDS
DDS
DDG
DDG
SUB
SUB
SUB
SUB
SUB
SUB
DUB
DUB
DUB
DUB
DUB
DUB
(See note 6)
GRM 2 S F - 2 - 85 DCB - 00 DDB - LAA
ne
GRM05
ua
ir
JAW A
JAW TIP OPTIONS
JAW A
MOUNTING
T - Rear Mounting Threads (Standard)
SIDE
DESIGN NO.
2 - Imperial
6 - Metric
(See note 4)
JAW OPENING - JAW A
50 - 50° Opening
85 - 85° Opening
JAW OPENING - JAW B
00 - 0° Opening
22 - 22-1/2° Opening
(See note 3)
PORT FITTINGS
BLANK - No Fitting
NOTES:
CLOSE
1) See unit views or dimensions.
2) See standard and chisel jaw style ordering data.
3) The 0° jaw rotates open no greater than 3° during the clamp cycle. The 0° jaw
OPEN
returns to 0° position as the opposing jaw reaches the fully open and fully closed
position. 22° opening on Jaw B is not available for size 4 flange jaw style.
4) Metric units have metric ports and mounting. Imperial units have imperial ports
OPEN
and mountings.
5) See Series GRM Clamp Accessories Catalog for non-standard mounting options.
CLOSE
6) Cone point against cone point tip combinations are not allowed due to point overlap.
GRM2xF
GRM4xF
ORDERING DATA: GRM CLAMP FLANGE JAW STYLE “F”
32
(800) 624-8511
TO ORDER SPECIFY:
Size, Mounting, Jaw Style Option, Design No., Jaw Opening (A & B), Jaw Tip
Option (A & B), and Fitting Option if desired.
BENEFITS
ua
ir
e
BENEFITS: GRM CLAMP FLANGE JAW STYLE “F”
■
Simple design, long life, high clamp force, and fast field
maintenance make these clamps ideal for sheet metal handling.
■
Available in two sizes, one jaw style, and three jaw openings to
fit a wide range of clamping applications.
■
Compact envelope size and high clamp force. Series GRM size
2 generates up to 225 lb [1000 N] of clamp force. The Series
GRM size 4 generates up to 500 lb [2224 N] of clamp force for
maximum flexibility and performance.
■
Six modular designed jaw tips are offered for maximum
clamping performance in a variety of applications.
■
The jaws of the Series GRM Clamp lock in the closed position
ensuring part retention if air pressure is lost due to line rupture
or power loss.
■
rear mounting.
■
One adjustable hardened steel impact plate eliminates damage
from panel impact.
■
Fully field repairable in just 10 minutes, using metric hex
wrenches.
■
Wide and deep throats accommodate difficult clamping
applications.
■
For additional mounting, jaw, switch, and tip options, see the
Series GRM Clamp Accessories Catalog.
■
SPECIFICATIONS
WORKING PRESSURE
BODY
JAWS
SEALS
pn
e
LUBRICATION
FLANGE JAW STYLE F
Hardcoat Aluminum
Hardened Steel
Lip Type Rod Seal
33
(800) 624-8511
GRM05
DIMENSIONS: FLANGE JAW STYLE “F” - SIZES 2 & 4
B4
(CLOSED)
M1
JAW PIVOT
J6
(CLOSED)
F3
B3
J8
F1
(ADJUSTABLE)
JAW A
J1
J2 (CLOSED)
F
B1 P3
P1
J7
JAW B
J12
(CLOSED)
P2
2X 1/8 NPT
[1/8 BSP] PORT
B2
MODEL NUMBER
GRM4xF
GRM2xF
in
mm
in
mm
2.176
55.3
1.910 48.5
1.980
50.3
1.654 42.0
1.338
34.0
.827
21.0
8.692 220.8
6.358 161.5
1.339
34.0
.965
24.5
.499
12.7
.453
11.5
2.560
65.0
1.801 45.7
2.941
74.7
2.291 58.2
3.757
95.4
2.787 70.8
2.008
51.0
1.350 34.3
.755
19.18
.755 19.18
.785
19.94
.630 16.00
.961
24.4
.768
19.5
2.087
53.0
1.270 32.3
1.181
30.0
1.063 27.0
2.028
51.5
1.621 41.2
1.673
42.5
1.517 38.5
1.595
40.5
1.064 27.0
.700
17.8
.650
16.5
.452
11.5
1.575 40.0
1.772
45.0
1.300 33.0
6.182 157.0
4.613 117.2
1.850
47.0
1.530 38.9
ua
ir
e
GRM2xF-x-xxxxx-00xxx
GRM4xF-x-xxxxx-00xxx
J3
2X M8 x 1.25 THREAD
(THRU BOTH JAWS)
J16
(PARALLEL)
T1
J4 J5
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F3
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J12 (CLOSED)
J16 (PARALLEL)
P1
P2
P3
M1
T1**
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
F5
NOTES:
1) SEE TIP DIMENSION AND MOUNTING BRACKET
PAGES.
2) THE 0° JAW ROTATES 1.7° DURING THE CLAMP
CYCLE, OPENING THE END OF THE JAW .035 [0.9].
THE JAW RETURNS TO THE 0° POSITION AS THE
OPPOSING JAW REACHES FULL OPEN OR CLOSED.
PORT LOCATION
GRM4xx UNITS ONLY
P1
P2
2X 1/8 NPT
(1/8 BSP) PORT
P3
PARTS BREAKDOWN
PART NUMBER
KEY
1
11A
4
3
12
pn
e
18
17
13
15
2
16
5B
1
5A
14
7
10
9
6
7
8
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
GRM2xF
63972-11
63972-12
63949
61467
57618-034
63974
63952-01
63950
62097
62099-01
52416-009
62176-02
63961-02
63959-02
63962-02
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
8
11B
KIT NUMBER
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
(800) 624-8511
GRM05
GRM4xF
64638-03
62152-04
63965-04
63966-04
34
GRM2xF
63967-03
62152-03
63965-02
63966-02
GRM4xF
64629-11
64629-12
64631
61468
57618-042
64634
64636-01
63969
62098
62100
52416-027
62177-02
63983-01
63981-01
64635-02
59104-118
59104-114
62221-001
59842-013-1
56902-009-9
3642-028-1
JAW ROTATION DIMENSIONS: FLANGE JAW STYLE “F”
ua
ir
e
GRM2xF-x-85xxx-00xxx
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (OPEN)
S1
T2
T3
85° Jaw A Rotates
STOP BLOCK
LOCATION
B4
(OPEN)
MODEL NUMBER
GRM2xF
GRM4xF
in
mm
in
mm
5.539
140.7
7.434
188.8
4.008
101.8
4.897
124.4
2.491
63.3
3.224
81.9
1.910
48.5
2.651
67.3
.197
5.0
.197
5.0
2.179
55.3
2.688
68.3
.689
17.5
.806
20.5
S1
HEX
J6
(OPEN)
FOR GRMxxF-x-85xxx-00xxx UNITS
JAW
JAW
PIVOT
T2
J1
(OPEN)
STOP BLOCK
F
STOP BLOCK
SHCS
T3
J15
(OPEN)
TOWARD JAW CAM SLOT
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (OPEN)
S1
T2
T3
50° Jaw A Rotates
B4
(OPEN)
STOP BLOCK LOCATION
pn
e
S1
HEX
J6
(OPEN)
JAW
PIVOT
F
T3
TIGHTEN TO
125 in-lb [14.1 Nm]
MODEL NUMBER
GRM2xF
GRM4xF
in
mm
in
mm
6.532
165.9
8.828
224.2
3.563
90.5
4.751
120.7
2.045
51.9
3.077
78.2
1.606
40.8
2.182
55.4
.197
5.0
.197
5.0
1.036
26.3
1.388
35.3
.689
17.5
.806
20.5
JAW
STOP BLOCK
J1
T2 (OPEN)
STOP BLOCK
SHCS
J15
(OPEN)
TOWARD JAW CAM SLOT
TIGHTEN TO
125 in-lb [14.1 Nm]
NOTE: Do not operate unit without stop block. Operating unit without stop block will damage the jaws.
35
(800) 624-8511
GRM05
DIMENSIONS: FLANGE JAW STYLE “F” - SIZE 2
ua
ir
e
B4
(CLOSED)
M1
B3
JAW PIVOT
J6
(CLOSED)
F3
JAW A
J8
F1
(ADJUSTABLE)
J1
J2 (CLOSED)
F
B1 P3
P1
J7
JAW B
P2
J12
(CLOSED)
2X 1/8 NPT
[1/8 BSP] PORT
B2
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F3
F5
J1 (CLOSED)
J2 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J12 (CLOSED)
J16 (PARALLEL)
P1
P2
P3
M1
T1**
J3
J16
(PARALLEL)
2X M8 x 1.25 THREAD
(THRU BOTH JAWS)
J4
J5 T1
MODEL NUMBER
GRM2xF
in
mm
1.910
48.5
1.654
42.0
.827
21.0
6.358
161.5
.965
24.5
.453
11.5
1.801
45.7
2.291
58.2
2.787
70.8
1.350
34.3
.755
19.18
.630
16.00
.768
19.5
1.270
32.3
1.063
27.0
1.621
41.2
1.517
38.5
1.064
27.0
.650
16.5
1.575
40.0
1.300
33.0
4.613
117.2
1.530
38.9
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
F5
NOTE:
SEE TIP DIMENSION AND MOUNTING BRACKET
PAGES.
PARTS BREAKDOWN
PART NUMBER
KEY
1
4
3
11A
12
pn
e
18
13
17
15
2
16
5B
1
5A
14
8
7
10
6
9
2
3
4
5A
5B
6
7
8
9
10
11A
11B
12
13
14
15
16
17
18
DESCRIPTION
-metric
PISTON & SHOCK PAD
BORE PLUG
RETAINING RING
IMPACT PLATE
IMPACT PLATE
ROD/JAW DRIVER
JAW BUSHING
SLIDER BUSHING
ROD/JAW DRIVER PIN
PIVOT PIN
JAW (A)
JAW (B)
STOP BLOCK
STOP BLOCK SHCS
IMPACT PLATE SHCS
PISTON SFHCS
ROD SEAL
PISTON SEAL
BORE PLUG SEAL
7
KIT NUMBER
8
11B
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
(800) 624-8511
GRM05
GRM2xF
63967-03
62152-03
63965-02
63966-02
36
GRM2xF
63972-11
63972-12
63949
61467
57618-034
63974
63952-01
63950
62097
62099-01
52416-009
62176-02
63961-02
63960-02
63962-02
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
JAW ROTATION DIMENSIONS: FLANGE JAW STYLE “F”
ua
ir
e
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
T2
T3
50° Jaw A Rotates
22° Jaw B Rotates
B4
(OPEN)
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
JAW
STOP BLOCK
J1
(OPEN)
F
JAW
PIVOT
T3
MODEL NUMBER
GRM2xF
in
mm
6.532 165.9
3.974 100.9
2.047 52.0
.197
5.0
1.585 40.3
1.237 31.4
STOP BLOCK
SHCS
T2
TOWARD JAW CAM SLOT
AS SHOWN
TIGHTEN TO
125 in-lb [14.1 Nm]
pn
e
NOTE: Do not operate unit without stop block. Operating unit without stop block will damage the jaws.
37
(800) 624-8511
GRM05
UNIT SIZE
2 - 32 mm
JAW STYLE OPTION
N - Needlenose
P - Hammerhead
MATERIAL THICKNESS: 0 to 4.0 mm
JAW OPENING - JAW A
00 - 00° Opening
22 - 22.5° Opening
45 - 45° Opening
75 - 75° Opening
(See Note 1)
JAW OPENING - JAW B
00 - 00° Opening
22 - 22.5° Opening
45 - 45° Opening
75 - 75° Opening
(See Note 1)
GRM CLAMP
JAW STYLE
OPTION
N & P ONLY
00
22
JAW B
45
75
GRM 2 S N - 2 - 22 - 22 - LAA
MOUNTING
T - Rear M6 Mounting Threads (Standard)
SIDE S - Spherical Mounting Bracket
DESIGN NO.
2 - Imperial
6 - Metric
(See Note 2)
ne
GRM05
ua
ir
JAW B
TO ORDER SPECIFY:
Size, Mounting, Jaw Style Option, Design No., Jaw
Opening (A & B), and Fitting Option if desired.
NOTES:
1) The 0° jaw rotates open no greater than 2.5° during
the clamp cycle, opening the jaw .118 [3.0]. The jaw
returns to the 0° position as the opposing jaw reaches
full open or closed.
PORT FITTINGS
BLANK - No Fitting
CLOSE
OPEN
GRM2xx
JAW A
00
NO
YES
YES
YES
22
YES
YES
NO
NO
45 75
YES YES
NO NO
YES NO
NO YES
ORDERING DATA: SERIES GRM CLAMP JAW STYLES “N & P”
38
(800) 624-8511
JAW A
BENEFITS
ua
ir
e
BENEFITS: NEEDLENOSE & HAMMERHEAD JAW STYLES “N & P”
■
Small profile makes these clamps ideal for clamping in very
tight openings.
■
Precision jaws with integral diamond points require no
adjustment for fast and easy setup.
■
Available in two jaw styles and 12 jaw openings to fit a wide
range of clamping applications.
■
■
■
Jaws mechanically lock in closed position ensuring part
retention even when air pressure is removed.
rear mounting.
■
from panel impact.
■
■
wrenches.
■
Hammerhead Jaw Style P
pn
e
■
Needlenose Jaw Style N
SPECIFICATIONS
WORKING PRESSURE
BODY
JAWS
SEALS
LUBRICATION
JAW STYLES N & P
Hardcoat Aluminum
Hardened Steel
Lip Type Rod Seal
39
(800) 624-8511
GRM05
DIMENSIONS: NEEDLENOSE JAW STYLE “N” - SIZE 2
ua
ir
e
GRM2xN-x-xx-xx
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F4
F5
J1 (CLOSED) - 75-75
J1 (CLOSED) - 45-45
J1 (CLOSED) - 22-22
J1 (CLOSED) - 75-00
J1 (CLOSED) - 45-00
J1 (CLOSED) - 22-00
J2 (CLOSED)
J4
J5
J6
J7
J8
J16 (PARALLEL)
P1
P2
P3
M1
B4
(CLOSED)
B3
M1
JAW PIVOT
J7
J8
F1
(ADJUSTABLE)
J6
(CLOSED)
JAW A
B1
J1
(CLOSED)
P3
P1
JAW B
P2
J2
2X 1/8 NPT
[1/8 BSP] PORT
J16
(PARALLEL)
J4
B2
J5
MODEL NUMBER
GRM2xN
mm
in
48.5
1.910
42.0
1.654
21.0
.827
6.403 162.6
38.0
1.496
25.0
.985
47.3
1.864
59.3
2.336
57.2
2.250
57.2
2.250
57.2
2.250
51.9
2.045
51.9
2.045
51.9
2.045
4.6
.183
20.3
.800
23.0
.906
28.6
1.125
54.5
2.146
11.1
.438
1.0
.040
16.5
.650
40.0
1.575
33.0
1.300
5.138 130.5
NOTES:
1) SEE MOUNTING BRACKET PAGES.
2) THE 0° JAW ROTATES 2.5° DURING THE
CLAMP CYCLE, OPENING THE END OF THE
JAW .118 [3.0]. THE JAW RETURNS TO THE
0° POSITION AS THE OPPOSING JAW
F4
F5
PARTS BREAKDOWN
4
KEY DESCRIPTION
1 BODY ASSEMBLY
11A
3
18
45° & 75° JAW
17
pn
e
22° JAW
15
2
(45° ROTATION ONLY) 19
16
5B
1
5A
14
10
7
6
9
8
imperial
metric
2 PISTON & SHOCK PAD
3 BORE PLUG
4 RETAINING RING
5A IMPACT PLATE
5B IMPACT PLATE
6 ROD/JAW DRIVER
7 JAW BUSHING
8 SLIDER BUSHING
9 ROD/JAW DRIVER PIN
10 PIVOT PIN
11A JAW (A) 45° & 75
JAW (A) 22°
11B JAW (B) 45° & 75°
JAW (B) 22°
JAW (B) 00°
14 IMPACT PLATE SHCS
15 PISTON SFHCS
16 ROD SEAL
17 PISTON SEAL
18 BORE PLUG SEAL
19 STROKE REDUCING BUSHING
7
8
11B
22° JAW
45° & 75° JAW
00° JAW
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
NOTE:
SEE MOUNTING BRACKET PAGES.
40
(800) 624-8511
GRM05
KIT NUMBER
GRM2xN
63967-04
62152-01
63965-02
63966-02
PART NUMBER
GRM2xN
63947-11
63947-12
63949
61467
57618-034
63952-00
63952-00
63950
62097
62099-01
52416-009
62176-01
65243-02
65214-02
65243-02
65214-02
65213-02
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
65420-002
JAW ROTATION DIMENSIONS: NEEDLENOSE JAW STYLE “N”
B4
(OPEN)
GRM2xN-x-75-00
ua
ir
e
GRM2xN-x-75-75
LETTER
DIM
B4
J1
MODEL NUMBER
GRM2xN
in
mm
4.681 118.9
4.970 126.2
LETTER
DIM
B4
J1
J6
J14
J15
T2
MODEL NUMBER
GRM2xN
in
mm
6.403 162.6
3.405
86.5
2.485
63.1
.920
23.4
1.876
47.7
1.722
43.7
J6
(OPEN)
J1
(OPEN)
T2
JAW
PIVOT
JAW PIVOT
J1
(OPEN)
J14
J15
(OPEN)
B4
(OPEN)
GRM2xN-x-45-45
LETTER
DIM
B4
J1
MODEL NUMBER
GRM2xN
mm
in
142.9
5.625
98.9
3.889
GRM2xN-x-45-00
LETTER
DIM
B4
J1
J6
J14
J15
T2
B4
(OPEN)
MODEL NUMBER
GRM2xN
mm
in
6.403 162.6
72.8
2.865
49.4
1.945
23.4
.920
39.4
1.553
33.3
1.310
J6
(OPEN)
JAW
PIVOT
JAW PIVOT
J1
(OPEN)
pn
e
LETTER
DIM
B4
J1
T2
MODEL NUMBER
GRM2xN
in
mm
6.191 157.3
2.355
59.8
1.418
36.0
B4
(OPEN)
GRM2xN-x-22-00
LETTER
DIM
B4
J1
J6
J14
J15
T2
B4
(OPEN)
JAW
PIVOT
T2
J1
(OPEN)
J1
(OPEN)
J14
J15
(OPEN)
GRM2xN-x-22-22
T2
J6
(OPEN)
MODEL NUMBER
GRM2xN
mm
in
6.403 162.6
53.3
2.097
29.9
1.177
23.4
.920
28.4
1.117
18.5
.727
JAW PIVOT
J15
(OPEN)
J1
(OPEN)
T2
J14
B4
(OPEN)
41
(800) 624-8511
GRM05
DIMENSIONS: HAMMERHEAD JAW STYLE “P” - SIZE 2
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F4
F5
J1 (CLOSED) - 75-75
J1 (CLOSED) - 45-45
J1 (CLOSED) - 22-22
J1 (CLOSED) - 75-00
J1 (CLOSED) - 45-00
J1 (CLOSED) - 22-00
J2 (CLOSED)
J4
J6
J7
J8
J16 (PARALLEL)
P1
P2
P3
M1
B4
(CLOSED)
B3
M1
JAW PIVOT
J7
J8
J6
(CLOSED)
F1
(ADJUSTABLE)
JAW A
B1
MODEL NUMBER
GRM2xP
mm
in
48.5
1.910
42.0
1.654
21.0
.827
162.6
6.403
38.0
1.496
25.0
.985
47.3
1.864
59.3
2.336
57.2
2.250
57.2
2.250
57.2
2.250
51.9
2.045
51.9
2.045
51.9
2.045
4.6
.183
38.1
1.500
28.6
1.125
54.5
2.146
11.1
.438
1.0
.040
16.5
.650
40.0
1.575
33.0
1.300
130.5
5.138
ua
ir
e
GRM2xP-x-xx-xx
J1
(CLOSED)
P3
P1
J16
(PARALLEL)
JAW B
P2
B2
2X 1/8 NPT
[1/8 BSP] PORT
J2
J4
NOTES:
2) THE 0° JAW ROTATES 2.5° DURING THE
CLAMP CYCLE, OPENING THE END OF THE
JAW .118 [3.0]. THE JAW RETURNS TO THE
0° POSITION AS THE OPPOSING JAW
F4
F5
PARTS BREAKDOWN
4
KEY
1
11A
3
45° & 75° JAW
18
2
3
4
5A
5B
6
7
8
9
10
11A
22° JAW
pn
e
17
15
2
(45° ROTATION ONLY) 19
16
11B
5B
1
5A
14
10
7
6
9
8
14
15
16
17
18
19
PART NUMBER
GRM2xP
imperial
63947-11
metric
63947-12
PISTON & SHOCK PAD
63949
BORE PLUG
61467
RETAINING RING
57618-034
IMPACT PLATE
63952-00
IMPACT PLATE
63952-00
ROD/JAW DRIVER
63950
JAW BUSHING
62097
SLIDER BUSHING
62099-01
ROD/JAW DRIVER PIN
52416-009
PIVOT PIN
62176-01
JAW (A) 45° & 75°
65244-02
JAW (A) 22°
65216-02
JAW (B) 45° & 75°
65244-02
JAW (B) 22°
65216-02
JAW (B) 00°
65215-02
IMPACT PLATE SHCS
59104-114
PISTON SFHCS
59104-600
ROD SEAL
59842-009-1
PISTON SEAL
56902-008-9
BORE PLUG SEAL
3642-027-1
STROKE REDUCING BUSHING
65420-002
DESCRIPTION
BODY ASSEMBLY
7
8
11B
22° JAW
45° & 75° JAW
00° JAW
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
NOTE:
SEE MOUNTING BRACKET PAGES.
42
(800) 624-8511
GRM05
KIT NUMBER
GRM2xP
63967-04
62152-01
63965-02
63966-02
JAW ROTATION DIMENSIONS: HAMMERHEAD JAW STYLE “P”
B4
(OPEN)
GRM2xP-x-75-00
MODEL NUMBER
GRM2xP
in
mm
4.681 118.9
4.970 126.2
MODEL NUMBER
GRM2xP
mm
in
6.403 162.6
86.5
3.405
63.1
2.485
23.4
.920
47.7
1.876
43.7
1.722
ua
ir
e
GRM2xP-x-75-75
LETTER
DIM
B4
J1
LETTER
DIM
B4
J1
J6
J14
J15
T2
J6
(OPEN)
J1
(OPEN)
T2
JAW
PIVOT
JAW PIVOT
J1
(OPEN)
J14
J15
(OPEN)
B4
(OPEN)
GRM2xP-x-45-45
B4
(OPEN)
GRM2xP-x-45-00
MODEL NUMBER
GRM2xP
in
mm
5.625 142.9
3.889
98.8
LETTER
DIM
B4
J1
LETTER
DIM
B4
J1
J6
J14
J15
T2
MODEL NUMBER
GRM2xP
mm
in
6.403 162.6
72.8
2.865
49.4
1.945
23.4
.920
39.4
1.553
33.3
1.310
J6
(OPEN)
JAW PIVOT
GRM2xP-x-22-22
MODEL NUMBER
GRM2xP
in
mm
6.191 157.3
2.355
59.8
1.418
36.0
LETTER
DIM
B4
J1
T2
J14
J15
(OPEN)
B4
(OPEN)
GRM2xP-x-22-00
B4
(OPEN)
JAW
PIVOT
T2
J1
(OPEN)
J1
(OPEN)
T2
J1
(OPEN)
pn
e
JAW
PIVOT
J6
(OPEN)
LETTER
DIM
B4
J1
J6
J14
J15
T2
JAW PIVOT
J15
(OPEN)
MODEL NUMBER
GRM2xP
mm
in
6.403 162.6
53.3
2.097
29.9
1.177
23.4
.920
28.4
1.117
18.5
.727
J1
(OPEN)
T2
J14
B4
(OPEN)
43
(800) 624-8511
GRM05
JAW A
25
NO
YES
NO
50
YES
NO
YES
JAW STYLE OPTION
K - “Hook” Clamp
JAW B
JAW OPENING - JAW A
25 - 25° Opening
50 - 50° Opening
JAW A
JAW OPENING - JAW B
00 - 00° Opening
20 - 20° Opening
40 - 40° Opening
(See Note 1)
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm
4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank
Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
GRM 2 C K - 2 - 50 DCB - 40 - DDB - LAA
MOUNTING
DESIGN NO.
2 - Imperial
6 - Metric
(See Note 2)
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm
4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank
Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
ne
GRM05
ua
ir
UNIT SIZE
2 - 32 mm (Short)
GRM CLAMP
JAW STYLE
OPTION
K STYLE ONLY
00
20
JAW B
40
NOTES:
1) The 0° jaw rotates open no greater than 2° during
the clamp cycle, opening the jaw .098 [2.5]. The jaw
returns to the 0° position as the opposing jaw reaches
full open or closed.
PORT FITTINGS
BLANK - No Fitting
CLOSE
OPEN
GRM2xK
ORDERING DATA: SERIES GRM CLAMP HOOK JAW STYLE “K”
44
(800) 624-8511
TO ORDER SPECIFY:
Size, Mounting, Jaw Style
Option, Design No., Jaw
Opening (A & B), Jaw Tip
Option, and Fitting Option
if desired.
BENEFITS
ua
ir
e
BENEFITS: SERIES GRM CLAMP HOOK JAW STYLE “K”
■
Short overall length makes this clamp ideal for clamping in
applications where length is critical.
■
Available in one jaw style and three openings.
■
maintenance make this unit ideal for sheet metal handling.
■
■
Modular designed tips are offered for maximum clamping
performance.
■
■
Precision jaws and color-coded tips require no adjustment for
fast and easy setup.
■
Jaws contain a locking thread to securely mount jaw tips.
■
rear mounting.
■
Adjustable-hardened steel impact plate eliminates damage from
panel impact.
■
■
wrenches.
■
SPECIFICATIONS
WORKING PRESSURE
pn
e
BODY
JAWS
SEALS
LUBRICATION
HOOK JAW STYLE K
Hardcoat Aluminum
Hardened Steel
Lip Type Rod Seal
45
(800) 624-8511
GRM05
DIMENSIONS: HOOK JAW STYLE “K” - SIZE 2
ua
ir
e
GRM2xK-x-xxxxx-00xxx
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
B5
F1 MAX
F1 MIN
F5
F6
J1 (CLOSED)
J3*
J4*
J5
J6 (CLOSED)
J7
J8
J12 (CLOSED)
J16 (PARALLEL)
P1
P2
P3
M1
T1**
B5
B4
(CLOSED)
M1
B3
F5
J8
JAW PIVOT
F1
(ADJUSTABLE)
F6
J6
(CLOSED)
B1 P3
P1
J1
(CLOSED)
J7
JAW B
P2
J12
(CLOSED)
JAW A
2X 1/8 NPT
[1/8 BSP] PORT
J3
J16
(PARALLEL)
J4
J5
T1
2X M8 x 1.25 THREAD
(THRU BOTH JAWS)
MODEL NUMBER
GRM2xK
mm
in
48.5
1.910
42.0
1.654
21.0
.827
133.4
5.250
146.4
5.763
25.5
1.004
20.0
.788
58.2
2.291
29.7
1.169
103.8
4.086
19.18
.755
16.00
.630
23.0
.906
33.3
1.310
58.5
2.303
13.0
.511
70.5
2.776
27.2
1.070
16.5
.650
40.0
1.575
33.0
1.300
89.0
3.504
38.9
1.530
* TOLERANCE FOR J3 & J4 = ± .003 [± .076]
**T1 IS THE LARGEST TIP AVAILABLE.
NOTES:
1) SEE TIP DIMENSIONS AND MOUNTING
BRACKET PAGES.
2) THE 0° JAW ROTATES 2° DURING THE
CLAMP CYCLE, OPENING THE END OF
THE JAW .098 [2.5]. THE JAW RETURNS
TO THE 0° POSITION AS THE OPPOSING
JAW REACHES FULL OPEN OR CLOSED.
B2
PARTS BREAKDOWN
KEY DESCRIPTION
1 BODY ASSEMBLY
11A
4
3
18
pn
e
17
12
13
15
2
16
5B
1
5A
14
10
9
8
7
6
imperial
metric
3 BORE PLUG
4 RETAINING RING
5A IMPACT PLATE
5B IMPACT PLATE
6 ROD/JAW DRIVER
7 JAW BUSHING
8 SLIDER BUSHING
10 PIVOT PIN
11A JAW (A)
11B JAW (B) 0° ROTATION
JAW (B) 40°, 20° ROTATION
12 STOP BLOCK 50° x 00°
50° x 40°, 25° x 20°
13 STOP BLOCK SHCS
15 PISTON SFHCS
16 ROD SEAL
17 PISTON SEAL
18 BORE PLUG SEAL
7
8
11B
00° JAW
40°, 20° JAW
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
NOTE:
SEE MOUNTING BRACKET PAGE.
46
(800) 624-8511
GRM05
KIT NUMBER
GRM2xK
63967-06
62152-03
63965-02
63966-02
PART NUMBER
GRM2xK
63972-11
63972-12
63949
61467
57618-034
63974
64659-01
63950
62097
62099-01
52416-009
62176-02
64654-01
64656-01
64655-01
63962-03
63962-02
59104-118
59104-114
59104-600
59842-009-1
56902-008-9
3642-027-1
JAW ROTATION DIMENSIONS: HOOK JAW STYLE “K”
MODEL NUMBER
GRM2xK
mm
in
6.804 172.8
95.4
3.754
59.6
2.346
32.9
1.296
5.0
.197
69.2
2.726
35.4
1.392
ua
ir
e
GRM2xK-x-50xxx-40xxx
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J12 (OPEN)
S1
T2
T3
B4
(OPEN)
JAW PIVOT
STOP BLOCK
LOCATION
S1
HEX
JAW
J1
(OPEN)
FOR GRM2xK-x-50xxx-40xxx UNITS
J12
(OPEN)
J6
(OPEN)
STOP BLOCK
STOP BLOCK
SHCS
T3
PANEL
CENTERLINE
T2
URETHANE PAD
ORIENTED TOWARD JAW
CAM SLOT AS SHOWN
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J12 (OPEN)
S1
T2
T3
B4
(OPEN)
JAW PIVOT
S1
HEX
TIGHTEN TO
125 in-lb [14.1 Nm]
STOP BLOCK
LOCATION
MODEL NUMBER
GRM2xK
mm
in
6.240 158.5
96.8
3.810
67.4
2.655
55.6
2.189
5.0
.197
38.0
1.497
18.0
.708
JAW
J1
(OPEN)
J6
(OPEN)
J12
(OPEN)
STOP BLOCK
STOP BLOCK
SHCS
PANEL
CENTERLINE
T3
pn
e
T2
URETHANE PAD
ORIENTED TOWARD JAW
CAM SLOT AS SHOWN
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J12 (OPEN)
S1
T2
JAW PIVOT
B4
(OPEN)
STOP BLOCK
LOCATION
S1
HEX
J1
(OPEN)
PANEL
CENTERLINE
MODEL NUMBER
GRM2xK
mm
in
6.804 172.8
3.950 100.3
70.5
2.776
32.9
1.296
5.0
.197
33.9
1.334
JAW
J12
(OPEN)
STOP BLOCK
J6
(OPEN)
T2
TIGHTEN TO
125 in-lb [14.1 Nm]
STOP BLOCK
SHCS
URETHANE PAD
ORIENTED TOWARD JAW
CAM SLOT AS SHOWN
TIGHTEN TO
125 in-lb [14.1 Nm]
47
(800) 624-8511
GRM05
ua
ir
JAW A
JAW B
UNIT SIZE
2 - 32 mm (Short)
4 - 40 mm (Long)
JAW STYLE OPTION
G - Toolable Jaw
JAW OPENING - JAW A
00 - 00° Opening
22 - 22.5° Opening
40 - 40° Opening
70 - 70° Opening
(See Notes 1 & 2)
JAW OPENING - JAW B
00 - 00° Opening
22 - 22.5° Opening
40 - 40° Opening
70 - 70° Opening
(See Notes 1 & 2)
MOUNTING
DESIGN NO.
2 - Imperial
6 - Metric
(See Note 3)
NOTES:
1) The 0° jaw rotates open no greater than 3° during
the clamp cycle. The 0° jaw returns to 0° as the
opposing jaw reaches full open or closed position.
2) 70° jaw rotation not available on size 2 unit.
- 40
JAW TIP OPTIONS
(JAWS A & B)
Blank - No Tip Available
ne
GRM05
GRM 2 S G - 2 - 40
FINGER BLANKS
MODEL
JAW
FINGER BLANK
NUMBER ROTATIONS KIT NUMBER
70-70
N/A
GRM2x
All Other Rot.
65225-02
70-70
65226-01
GRM4x
All Other Rot.
65226-02
GRM CLAMP
SIZE 2
JAW STYLE
OPTION
G ONLY
00
22
JAW B
40
70
GRM CLAMP
SIZE 4
JAW STYLE
OPTION
G ONLY
00
22
JAW B
40
70
JAW A
00
NO
NO
YES
NO
22
NO
YES
NO
NO
40
YES
NO
YES
NO
JAW A
00
NO
NO
YES
YES
22
NO
YES
NO
NO
40
YES
NO
YES
NO
- LAA
PORT FITTINGS
BLANK - No Fitting
CLOSE
GRM2xG
OPEN
GRM4xG
OPEN
CLOSE
70
NO
NO
NO
NO
70
YES
NO
NO
YES
ORDERING DATA: SERIES GRM CLAMP TOOLABLE JAW STYLE “G”
48
(800) 624-8511
TO ORDER SPECIFY:
Size, Mounting, Jaw Style Option, Design No., Jaw
Opening (A & B), and Fitting Option if desired.
BENEFITS
ua
ir
e
BENEFITS: SERIES GRM CLAMP TOOLABLE JAW STYLE “G”
■
Wide jaw opening and threaded holes to mount custom tooling
make this clamp ideal for difficult to grip panels.
■
Available with machineable aluminum finger blanks for ease of
tooling.
■
Available in one jaw style and five openings.
■
■
Compact envelope size with grip forces up to 225 lb [1000 N]
for size 2 and 500 lb [2224 N] for size 4, providing maximum
flexibility and performance.
■
■
rear mounting.
■
from panel impact.
■
■
Fully field repairable in less than 10 minutes.
machineable aluminum
finger blank kits
SPECIFICATIONS
WORKING PRESSURE
BODY
JAWS
SEALS
LUBRICATION
JAW STYLE G
Hardcoat Aluminum
Hardened Steel
Lip Type Rod Seal
pn
e
APPLICATION EXAMPLE
The G jaw style clamps are specifically designed to provide
a large opening to get around difficult panels. The jaws
have flat mounting surfaces and thru holes to easily
mount customer designed tips. PHD also offers
aluminum finger blanks that can be machined to
match your part profile. For more information,
see the Finger Blanks page.
machineable aluminum
finger blank kits
49
(800) 624-8511
GRM05
DIMENSIONS: SERIES GRM CLAMP TOOLABLE JAW STYLE “G”
B4
(CLOSED)
M1
JAW PIVOT
B3
J7
J8
J4
F1
ADJUSTABLE
JAW A
J1
J2
B1
P3
J16
(PARALLEL)
P1
FB1
P2
J17
2X 1/8 NPT
[1/8 BSP] PORT
JAW B
J19***
J4
J18
J21
J5
B2
J20
CL OF THREAD TO
CL OF THREAD
F4
F5
PORT LOCATION
GRM4xx UNITS ONLY
P2
P3
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
J19***
F1 MIN
F4
F5
J1 (PARALLEL)
J2 (PARALLEL)
J4*
J5
J7
J8
J9
J10
J16 (PARALLEL)
J17
J18
J19
J20
J21
P1
P2
P3
M1
FB1**
* TOLERANCE FOR J4 DIM = ± .003 [± .076]
** FB1 IS A CLEARANCE FOR JAWS TO PASS EACH
OTHER FOR 70° x 70° JAW ROTATIONS ONLY
*** J19 DIMENSION IS CL OF CLAMP TO CL OF THREAD
4X FOR J9 SHCS
J10 LOCKING THREAD THRU
P1
MODEL NUMBER
GRM2xG
GRM4xG
in
mm
in
mm
1.910 48.5 2.176 55.3
1.654 42.0 1.980 50.3
.827
21.0 1.338 34.0
6.713 170.5 8.996 228.5
1.948 49.5 2.461 62.5
1.437 36.5 1.621 41.2
1.864 47.3 2.190 55.6
2.336 59.3 2.662 67.6
3.780 96.0 4.724 120.0
1.063 27.0 1.250 31.8
.591 15.01 .660 16.76
.906
23.0 1.136 28.9
2.598 66.0 3.150 80.0
.296
7.5
.354
9.0
1/4
M6
5/16
M8
M8 x 1.25
M10 x 1.5
2.126 54.0 2.500 63.5
.827
21.0 1.112 28.2
1.063 27.0 1.181 30.0
.158
4.0
.238
6.0
.316
8.0
.476
12.1
.295
7.5
.330
8.4
.650
16.5
.388
9.9
1.575 40.0
.452
11.5
1.300 33.0 1.772 45.0
5.590 142.0 7.304 185.5
—
—
2.677 68.0
ua
ir
e
GRM2xG-x-xx-xx
GRM4xG-x-xx-xx
NOTE:
1) SEE MOUNTING BRACKET PAGE.
2X 1/8 NPT
[1/8 BSP] PORT
PARTS BREAKDOWN
4
KEY DESCRIPTION
1 BODY ASSEMBLY
11A
pn
e
3
18
12
17
13
15
2
16
5A
5B
1
14
8
7
10
6
9
imperial
metric
3 BORE PLUG
4 RETAINING RING
5A IMPACT PLATE
5B IMPACT PLATE
6 ROD/JAW DRIVER
7 JAW BUSHING
8 SLIDER BUSHING
10 PIVOT PIN
11A JAW (A)
11B JAW (B)
12 STOP BLOCK
13 STOP BLOCK SHCS
15 PISTON SFHCS
16 ROD SEAL
17 PISTON SEAL
18 BORE PLUG SEAL
7
8
11B
13
12
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
50
(800) 624-8511
GRM05
PART NUMBER
GRM2xG
GRM4xG
63947-11
63927-11
63947-12
63927-12
63949
64631
61467
61468
57618-034
57618-042
63952-00
64636-00
63952-00
64636-00
63950
63969
62097
62098
62099-01
62100
52416-009
52416-027
62176-01
62177-01
63989-01
65217-01
63989-01
65217-01
63962-02
64635-02
59104-118
59104-118
59104-114
59104-114
59104-600
62221-001
59842-009-1 59842-013-1
56902-008-9 56902-009-9
3642-027-1
3642-028-1
KIT NUMBER
GRM2xG
GRM4xG
63967-04
64638-04
62152-01
62152-02
63965-02
63965-04
63966-02
63966-04
JAW ROTATION DIMENSIONS: TOOLABLE JAW STYLE “G”
MODEL NUMBER
GRM4xG
in
mm
5.516 140.1
8.201 208.3
.197
5.0
2.677 68.0
ua
ir
e
GRM4xG-x-70-70
TWO STOP BLOCKS REQUIRED
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
S1
FB1
FB1
(ON EACH JAW)
FOR GRMxxG-x-70-70 UNITS
JAW
PIVOT
J1
(OPEN)
JAW
URETHANE PAD
ORIENTED TOWARD
JAW CAM SLOT AS
SHOWN
STOP BLOCK SHCS
S1
HEX
STOP BLOCK
LOCATION
(BOTH JAWS)
STOP BLOCK
TIGHTEN TO
125 in-lb [14.1 Nm]
B4
(OPEN)
GRM2xG-x-40-40
GRM4xG-x-40-40
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
S1
STOP BLOCK LOCATION
(BOTH JAWS)
MODEL NUMBER
GRM2xG
GRM4xG
in
mm
in
mm
5.353 136.0 7.372 187.2
6.616 168.0 8.126 206.4
.197
5.0
.197
5.0
S1 HEX
(ON EACH JAW)
JAW PIVOT
J1
(OPEN)
STOP BLOCK
pn
e
JAW
B4
(OPEN)
STOP BLOCK SHCS
GRM2xG-x-22-22
GRM4xG-x-22-22
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
S1
STOP BLOCK LOCATION
(BOTH JAWS)
S1
HEX
MODEL NUMBER
GRM2xG
GRM4xG
in
mm
in
mm
6.086 154.6 8.251 209.6
5.707 145.0 7.046 179.0
.197
5.0
.197
5.0
(ON EACH JAW)
JAW PIVOT
J1
(OPEN)
B4
(OPEN)
TIGHTEN TO
125 in-lb [14.1 Nm]
TOWARD JAW CAM SLOT
AS SHOWN
STOP BLOCK
JAW
STOP BLOCK SHCS
TOWARD JAW CAM SLOT
AS SHOWN
TIGHTEN TO
125 in-lb [14.1 Nm]
51
(800) 624-8511
GRM05
DIMENSIONS: SERIES GRM CLAMP TOOLABLE JAW STYLE “G”
B4
(CLOSED)
M1
JAW PIVOT
B3
J7
J8
J4
F1
ADJUSTABLE
J19**
JAW A
J1
J2
B1
P3
J16
(PARALLEL)
P1
P2
J17
2X 1/8 NPT
[1/8 BSP] PORT
JAW B
J19**
J4
J18
B2
J21
J5
J20
CL OF THREAD TO
CL OF THREAD
F4
F5
4X FOR J9 SHCS
J10 LOCKING THREAD THRU
P2
P3
LETTER
DIM
B1
B2
B3
B4 (CLOSED)
F1 MAX
F1 MIN
F4
F5
J1 (PARALLEL)
J2 (PARALLEL)
J4*
J5
J7
J8
J9
J10
J16 (PARALLEL)
J17
J18
J19
J20
J21
P1
P2
P3
M1
* TOLERANCE FOR J4 DIM = ± .003 [± .076]
** J19 DIMENSION IS CL OF CLAMP TO CL OF THREAD
NOTE:
PORT LOCATION
GRM4xx UNITS ONLY
P1
MODEL NUMBER
GRM4xG
GRM2xG
mm
in
mm
in
1.910 48.5 2.176 55.3
1.654 42.0 1.980 50.3
21.0 1.338 34.0
.827
6.713 170.5 8.996 228.5
1.948 49.5 2.461 62.5
1.437 36.5 1.621 41.2
1.864 47.3 2.190 55.6
2.336 59.3 2.662 67.6
3.780 96.0 4.724 120.0
1.063 27.0 1.250 31.8
.591 15.01 .660 16.76
23.0 1.136 28.9
.906
2.598 66.0 3.150 80.0
7.5
.296
9.0
.354
M6
1/4
M8
5/16
M8 x 1.25
M10 x 1.5
2.126 54.0 2.500 63.5
21.0 1.112 28.2
.827
1.063 27.0 1.181 30.0
4.0
.158
6.0
.238
8.0
.316
12.1
.476
7.5
.295
8.4
.330
16.5
.650
9.9
.388
1.575 40.0
11.5
.452
1.300 33.0 1.772 45.0
5.590 142.0 7.304 185.5
ua
ir
e
GRM2xG-x-xx-00
GRM4xG-x-xx-00
2X 1/8 NPT
[1/8 BSP] PORT
PARTS BREAKDOWN
4
KEY DESCRIPTION
1 BODY ASSEMBLY
11A
pn
e
3
18
12
17
70°, 40° JAW
13
15
2
16
5A
5B
1
14
10
8
7
6
9
imperial
metric
3 BORE PLUG
4 RETAINING RING
5A IMPACT PLATE
5B IMPACT PLATE
6 ROD/JAW DRIVER
7 JAW BUSHING
8 SLIDER BUSHING
10 PIVOT PIN
11A JAW (A) - 70°, 40°
11B JAW (B) - 0
12 STOP BLOCK
13 STOP BLOCK SHCS
15 PISTON SFHCS
16 ROD SEAL
17 PISTON SEAL
18 BORE PLUG SEAL
PART NUMBER
GRM2xG
GRM4xG
63947-11
63927-11
63947-12
63927-12
63949
64631
61467
61468
57618-034
57618-042
63952-00
64636-00
63952-00
64636-00
63950
63969
62097
62098
62099-01
62100
52416-009
52416-027
62176-01
62177-01
63989-01
65217-01
63990-01
65218-01
63962-02
64635-02
59104-118
59104-118
59104-114
59104-114
59104-600
62221-001
59842-009-1 59842-013-1
56902-008-9 56902-009-9
3642-027-1
3642-028-1
7
8
11B
0° JAW
KIT DESCRIPTION
IMPACT PLATE KIT
JAW REBUILD KIT
SEAL KIT
FASTENER KIT
52
(800) 624-8511
GRM05
KIT NUMBER
GRM4xG
GRM2xG
64638-04
63967-04
62152-02
62152-01
63965-04
63965-02
63966-04
63966-02
JAW ROTATION DIMENSIONS: TOOLABLE JAW STYLE “G”
MODEL NUMBER
GRM4xG
mm
in
8.996 228.5
6.463 164.2
4.101 104.2
2.542 64.6
5.0
.197
ua
ir
e
GRM4xG-x-70-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
J15 (OPEN)
S1
STOP BLOCK
LOCATION
S1
HEX
J6
(OPEN)
J1
(OPEN)
JAW PIVOT
J15
(OPEN)
B4
(OPEN)
(ON EACH JAW)
JAW
TOWARD JAW CAM SLOT
AS SHOWN
STOP BLOCK SHCS
STOP BLOCK
GRM2xG-x-40-00
GRM4xG-x-40-00
LETTER
DIM
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
pn
e
STOP BLOCK LOCATION
S1
HEX
J6
(OPEN)
JAW PIVOT
TIGHTEN TO
125 in-lb [14.1 Nm]
MODEL NUMBER
GRM2xG
GRM4xG
in
mm
in
mm
6.713 170.5 8.996 228.5
5.198 132.0 6.424 163.2
3.308 84.0 4.062 103.2
.197
5.0
.197
5.0
(ON EACH JAW)
J1
(OPEN)
STOP BLOCK
JAW
STOP BLOCK SHCS
TIGHTEN TO
125 in-lb [14.1 Nm]
B4
(OPEN)
TOWARD JAW CAM SLOT
AS SHOWN
53
(800) 624-8511
GRM05
EFFECTIVE CLAMPING RANGE: TOOLABLE JAW STYLE “G”
The effective clamping range is defined as the range where the
clamp develops the greatest amount of grip force. The effective
clamping range occurs between the beginning (C1) and ending jaw
positions as shown below. Within this clamping range the jaws are
locked in position even if pressure is lost. The effective clamping
range, for each jaw, is from .75° open to -0.5° closed (past parallel).
ua
ir
e
MODEL NUMBER
GRM2xG
GRM4xG
LETTER
in
mm
in
mm
DIM
3.855 97.9 4.815 122.3
C1
* C1 DIMENSION IS THE BEGINNING OF THE EFFECTIVE
CLAMPING RANGE MEASURED AT THE CORNER OF
THE JAW
BEGINNING CLAMPING RANGE
ENDING POSITION
.75°
-.50°
1.50°
(OPEN)
-1.00°
(CLOSED)
C1*
NOTES:
1) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm.
2) ANGULAR DIMENSIONS ARE MEASURED IN DEGREES.
TOTAL CLAMP FORCE (Cf)
To achieve maximum clamp force, custom tooling must be
designed to grip the part with the jaws located in the high force range.
The greatest amount of clamp force occurs during the last 1.25° of
each jaw’s rotation. Refer to the picture for high grip force range.
Cf
External Grip
Imperial Metric
9083
5.55
26503
16.2
MODEL
GRM2xG-x-xx-xx
GRM4xG-x-xx-xx
PRESSURE (psi) x Cf x Cf MULTIPLIER
= TOTAL FORCE (lb)
DISTANCE FROM JAW PIVOT (in)
CLAMP FORCE MULTIPLIER
FOR GRM2xG AND GRM4xG
PRESSURE (bar) x Cf x Cf MULTIPLIER
= TOTAL FORCE (N)
DISTANCE FROM JAW PIVOT (mm)
1.2
NOTE: The force multiplier with the jaws
rotated between -.5° and + .75° is 1.0.
Cf MULTIPLIER
pn
e
1.0
0.8
0.6
0.4
GRM2xG
0.2
GRM4xG
0
-0.5
POWER UP REGION
.75°
0
0.5
1
2
3
4
5
10
15
20
3.00°
PARALLEL
-0.5°
-0.5°
HIGH GRIP FORCE RANGE
PARALLEL
.75°
3.00°
POWER UP REGION
NOTE:
1) ANGULAR DIMENSIONS ARE MEASURED IN DEGREES.
54
(800) 624-8511
GRM05
25
30
JAW POSITION (degree)
35
40
45
50
55
60
65
70
FINGER BLANKS: TOOLABLE JAW STYLE “G”
ua
ir
e
FB2
FB3
CUTOUT REQUIRED TO
CLEAR 70° x 70° JAW ONLY
FB1
THIS SURFACE TO BE USED TO REGISTER
AGAINST THE END OF THE JAW
MOUNTING SURFACE
FB4
FB5
FB9
FB6
FB7
INFORMATION FOR APPLYING FINGER
BLANKS OR CUSTOM TOOLING
FB10
FB11
FB12
1. Finger blanks are made from 6061 aluminum. The outside
surfaces are vibratory polished.
FB8 LOCKING THREAD
2. G jaws are made from 4140 steel, through hardened 30 to 35 Rc.
They are machinable; customers can modify the jaws to mount
special tooling. Consult PHD on jaw modifications.
FB13
FB14
pn
e
THIS CUTOUT IS REQUIRED FOR GRMxxG-x-70-70
UNITS ONLY (IT ALLOWS CLEARANCE FOR
OPPOSITE JAW TO PASS WHEN JAWS ARE IN
FULL OPEN POSITION)
LETTER
DIM
FB1
FB2
FB3
FB4
FB5
FB6
FB7
FB8
FB9
FB10
FB11
FB12
FB13
FB14
MODEL NUMBER
GRM4xG
GRM2xG
mm
in
mm
in
—
—
2.677 68.0
4.921 125.0 6.142 156.0
2.894 73.5 3.504 89.0
1.063 27.0 1.250 31.8
1.063 27.0 1.181 30.0
7.5
.296
9.0
.354
2.027 51.5 2.638 67.0
M6 x 1.0
M8 x 1.25
4.3
.168
4.5
.178
7.6
.299
8.5
.334
15.2
.598
16.9
.667
1.250 31.8 1.500 38.1
—
—
16.3
.640
—
—
20.9
.822
3. G jaws are not in line with each other. They are shifted off center
by dimension J19 (see chart). This is necessary to clear the cam
portion of the opposite jaw when opening 70°. Finger blanks or
custom tooling must also clear this cam area when opening 70°
(see dim FB1 on dimensional page). Consider the J19 offset
dimension when modifying finger blanks or making special
tooling so that the tooling can align properly. Jaw width is
controlled so tooling can be slotted to key into place. The end of
the jaws are accurately machined to provide a tooling length
registration stop. Jaw mounting threads J10 (see chart) can
accept fasteners from inside or outside. They are self-locking
when the fasteners are installed from the outside (as shown) and
torqued properly. Use the mounting geometry shown shaded on
finger blanks (45° chamfer, cutout for 70° opening, thread
locations and J19 offset dimensions) to design custom tooling.
4. Standard aluminum finger blanks can be used without the need
for speed controls on the clamp. Dual rotation stops must be
used on G jaws as shown. For custom finger blanks that are
heavier, longer, or wider than the finger blanks shown, consult
PHD for approval.
MODEL
NUMBER
GRM2x
GRM4x
FINGER BLANK
JAW
KIT NUMBER
ROTATIONS
N/A
70-70
65225-02
All Other Rot.
65226-01
70-70
65226-02
All Other Rot.
WEIGHT PER
FINGER BLANK
kg
lb
—
—
.29
.64
.50
1.10
.44
.96
KIT INCLUDES:
1 FINGER BLANK
2 MOUNTING SCREWS
55
(800) 624-8511
GRM05
ENGINEERING DATA: SERIES GRM CLAMPS
SIZE 4 SPECIFICATIONS
ua
ir
e
SIZE 2 SPECIFICATIONS
UNIT
WEIGHT*
lb
kg
TOTAL
CLAMP FORCE
at 87 psi [6 bar]
N
lb
MAXIMUM
EXTERNAL
LOAD
N
lb
1334
1334
1334
1334
1334
1334
1334
MAXIMUM
EXTERNAL
LOAD
lb
N
2002
2002
2002
2002
2002
2002
2002
1334
MOUNTING OPTIONS
1334
1334
1334
1334
MTG.
CODE
C
R
S
W
A
B
P
T
WEIGHT ADDER
SIZE 2
SIZE 4
lb kg
lb kg
DESCRIPTION
.62 .28 .99 .45
90° Spherical Mounting Bracket
.38 .17 .52 .24
Non-Spherical Mounting Bracket
.49 .22 .64 .29
Spherical Mounting Bracket
.81 .37 .92 .42
Oversize Spherical Mounting Bracket
1.00 .45 1.68 .76
Rear Spherical Mounting Bracket
Oversize Rear Spherical Mounting Bracket 1.67 .76 1.71 .78
.24 .11 .56 .25
Rear Mounting Plate
0 0
0 0
Rear Mounting Thread (Standard)
1334
1334
1334
1334
1334
1334
56
(800) 624-8511
TOTAL
CLAMP FORCE
at 87 psi [6 bar]
lb
N
MODEL
GRM4xS-x-75-75
4.2 1.91
500 2224
450
GRM4xS-x-45-45
GRM4xS-x-22-22
GRM4xS-x-75-00
4.0 1.81
500 2224
450
GRM4xS-x-45-00
GRM4xS-x-22-00
GRM4xH-x-75-00
4.0 1.81
500 2224
450
GRM4xH-x-45-00
GRM4xH-x-22-00
GRM4xJ-x-75-00
4.2 1.91
500 2224
450
GRM4xJ-x-45-00
GRM4xJ-x-22-00
GRM4xF-x-85-00
4.3 1.95
500 2224
450
GRM4xF-x-50-00
GRM4xG-x-70-70
4.2 1.91
500 2224
450
GRM4xG-x-40-40
GRM4xG-x-22-22
GRM4xG-x-70-00
4.2 1.91
500 2224
450
GRM4xG-x-40-00
*Weight is for basic clamp without mounting bracket or tips
pn
e
MODEL
GRM2xS-x-75-75
2.1 0.95
225 1000
300
GRM2xS-x-45-45
GRM2xS-x-22-22
GRM2xS-x-75-00
2.0 0.91
225 1000
300
GRM2xS-x-45-00
GRM2xS-x-22-00
GRM2xC-x-75-75
2.0 0.91
225 1000
300
GRM2xC-x-45-45
GRM2xC-x-22-22
GRM2xC-x-75-00
2.0 0.91
225 1000
300
GRM2xC-x-45-00
GRM2xC-x-22-00
GRM2xD-x-75-75
2.0 0.91
225 1000
300
GRM2xD-x-45-45
GRM2xD-x-22-22
GRM2xD-x-75-00
2.0 0.91
225 1000
300
GRM2xD-x-45-00
GRM2xD-x-22-00
GRM2xH-x-75-00
2.0 0.91
225 1000
300
GRM2xH-x-45-00
GRM2xH-x-22-00
GRM2xJ-x-75-00
2.1 0.95
225 1000
300
GRM2xJ-x-45-00
GRM2xJ-x-22-00
GRM2TL-x-85-00
2.5 1.13
225 1000
300
GRM2TL-x-45-00
GRM2TL-x-22-00
GRM2TM-x-85-00
2.7 1.22
225 1000
300
GRM2TM-x-45-00
GRM2TM-x-22-00
GRM2xF-x-85-00
2.1 0.95
225 1000
300
GRM2xF-x-50-00
GRM2xF-x-50-22
GRM2xN-x-75-75
1.9 0.86
225 1000
300
GRM2xN-x-45-45
GRM2xN-x-22-22
GRM2xN-x-75-00
1.9 0.86
225 1000
300
GRM2xN-x-45-00
GRM2xN-x-22-00
GRM2xP-x-75-75
1.9 0.86
225 1000
300
GRM2xP-x-45-45
GRM2xP-x-22-22
GRM2xP-x-75-00
1.9 0.86
225 1000
300
GRM2xP-x-45-00
GRM2xP-x-22-00
GRM2xK-x-50-40
2.0 0.91
225 1000
300
GRM2xK-x-25-20
GRM2xK-x-50-00
GRM2xG-x-40-40
2.3 1.04
225 1000
300
GRM2xG-x-22-22
2.3 1.04
225 1000
300
GRM2xG-x-40-00
*Weight is for basic clamp without mounting bracket or tips
UNIT
WEIGHT*
lb
kg
GRM05
TIP OPTIONS
TIP WEIGHT
SIZE 4
SIZE 2
MODEL lb kg lb kg
SCx .03 .01 .04 .02
SDx .07 .03 .13 .06
DCx .13 .06 .25 .11
DDx .13 .06 .25 .11
SUB .04 .02 .08 .04
DUB .10 .05 .16 .07
MODEL
GRM2
GRM4
DISPLACEMENT
OPEN OR CLOSE
cm3
in3
1.15 18.8
2.40 39.4
ua
ir
e
ENGINEERING DATA: SERIES GRM CLAMPS
SEALS AND FLUIDS
Buna-N and Nitrile seals are standard on all Series GRM
Clamps. Piston seals are long life Nitrile and rod seals are lip type.
Both are compatible with standard paraffin-based lubrication oils
used for pneumatic cylinders. For compatibility with other fluids,
consult PHD.
TEMPERATURE LIMITS
Seals and clamp mechanism are designed for use in
temperatures from –20° to 180°F [–30° to 82°C]. For higher
temperatures, consult PHD.
LIFE EXPECTANCY
All units with Buna-N and Nitrile seals have been designed for
5 million cycles with minimal seal wear and minimal backlash.
LUBRICATION
Seals and clamp mechanism are prelubricated at the factory for
service under normal operating conditions.
MATERIAL
Clamp body is made of hardcoated aluminum. Jaws and
operating mechanism are manufactured from hardened steel.
SPECIAL CLAMPS
pn
e
Clamps for special applications, severe duty, or constructed of
special materials are available. Consult PHD.
57
(800) 624-8511
GRM05
TIP MOUNTING
ua
ir
e
TIP MOUNTING: JAW STYLES “S, C, D, K, L, AND M”
DOUBLE DIAMOND
POINT PAD
(-DDB, -DDS, -DDG)
SINGLE DIAMOND
POINT PAD
(-SDB,-SDS, -SDG)
DOUBLE CONE
POINT
(-DCB, -DCS, -DCG)
M8 LHCS
M6 SHCS
SINGLE
CONE POINT
(-SCB, -SCS, -SCG)
SINGLE
URETHANE PAD
(-SUB)
DOUBLE
URETHANE PAD
(-DUB)
RECOMMENDED TIP COMBINATIONS
(See Tip Dimensions page.)
JAW A
JAW B
Jaw Style S only
DCx
DDx
DUB
SUB
SDx
SCx
DDx
DDx
DUB
SUB
SDx
SDx
pn
e
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm
4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank
Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm
4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank
Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
NOTE: Cone point against cone point tip combinations are not allowed due to point overlap.
58
(800) 624-8511
GRM05
TIP MOUNTING
ua
ir
e
TIP MOUNTING: SHOVEL JAW STYLES “H & J”
DOUBLE DIAMOND
POINT PAD
(-DDB, -DDS, -DDG)
SINGLE DIAMOND
POINT PAD
(-SDB,-SDS, -SDG)
DOUBLE CONE
POINT
(-DCB, -DCS, -DCG)
M8 LHCS
M6 SHCS
SINGLE
CONE POINT
(-SCB, -SCS, -SCG)
SINGLE
URETHANE PAD
(-SUB)
DOUBLE
URETHANE PAD
(-DUB)
DDx
JAW A
DCx
DUB
SDx
SCx
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm
4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank
Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
pn
e
Material Thickness
0 to
1.51 to 3.01 to
1.50 mm 3 mm
4 mm
Color
Black
Silver
Gold
No tip
Blank
Blank
Blank
Single Cone Point
SCB
SCS
SCG
Double Cone Point
DCB
DCS
DCG
SDB
SDS
SDG
DDB
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
SUB
TIP COMBINATIONS
SINGLE SHOVEL POINT
DOUBLE SHOVEL POINT
M6 SHCS
M6 SHCS
TIP EXTENSION
TIP EXTENSION
TIP EXTENSION
SINGLE CONE TIP
(-xxSCB, -xxSCS)
TIP EXTENSION
SINGLE URETHANE TIP
(-xxSUB)
SINGLE SHOVEL JAW
SINGLE DIAMOND TIP
(-xxSDB, -xxSDS)
DOUBLE URETHANE TIP
(-xxDUB)
DOUBLE CONE TIP
(-xxDCB, -xxDCS)
DOUBLE DIAMOND TIP
(-xxDDB, -xxDDS)
DOUBLE SHOVEL JAW
M8 LHCS
M8 LHCS
59
(800) 624-8511
GRM05
TIP MOUNTING
ua
ir
e
TIP MOUNTING: FLANGE JAW STYLE “F”
DOUBLE DIAMOND
POINT PAD
(-DDB, -DDS, -DDG)
SINGLE DIAMOND
POINT PAD
(-SDB,-SDS, -SDG)
DOUBLE CONE
POINT
(-DCB, -DCS, -DCG)
M8 LHCS
M6 SHCS
SINGLE
CONE POINT
(-SCB, -SCS, -SCG)
SINGLE
URETHANE PAD
(-SUB)
DOUBLE
URETHANE PAD
(-DUB)
JAW A
DDx
DUB
SUB
SDx
SCx
DDx
DDx
DDx
SDx
SDx
SDx
JAW TIP OPTIONS - 85° & 50° JAW A
Material Thickness [mm]
.86 to 1.21 to 1.53 to 1.95 to
0 to.85 1.20
1.52
1.94
2.29
Color
Black
Silver
Gold
Silver
Gold
Single Cone Point
SCB
SCS
SCG
SCS
SCG
Double Cone Point
DCB
DCS
DCG
DCS
DCG
Single Diamond Point Pad
SDB
SDS
SDG
SDS
SDG
Double Diamond Point Pad DDB
DDS
DDG
DDS
DDG
Single Urethane Pad
SUB
SUB
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
DUB
DUB
2.3 to
2.6
Gold
SCG
DCG
SDG
DDG
SUB
DUB
2.61 to
3.0
Urethane
—
—
—
—
SUB
DUB
JAW TIP OPTIONS - 0° & 22° JAW B
Material Thickness [mm]
.86 to 1.21 to 1.53 to 1.95 to
0 to.85 1.20
1.52
1.94
2.29
Color
Black
Black
Black
Silver
Silver
Single Cone Point
SCB
SCB
SCB
SCS
SCS
Single Diamond Point Pad
SDB
SDB
SDB
SDS
SDS
Double Diamond Point Pad DDB
DDB
DDB
DDS
DDS
Single Urethane Pad
SUB
SUB
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
DUB
DUB
2.3 to
2.6
Gold
SCG
SDG
DDG
SUB
DUB
2.61 to
3.0
Gold
SCG
SDG
DDG
SUB
DUB
pn
e
JAW B
DCx
60
(800) 624-8511
GRM05
TIP DIMENSIONS: SERIES GRM CLAMPS
-SCB, -SCS, -SCG
-SDB, -SDS, -SDG
SINGLE CONE POINT
SINGLE CONE POINT
(FOR JAW STYLE H ONLY)
SINGLE DIAMOND
POINT PAD
TIP EXTENSION - FOR USE WITH:
-SDB, -SDS, -SDG, -DCB, -DCS, -DCG
-DDB, -DDS, -DDG, -SUB, -DUB
-SUB
ua
ir
e
-SCB, -SCS, -SCG
SINGLE URETHANE PAD
(FOR JAW STYLES H & J ONLY)
T2
T1
HEX
T1
HEX
T2
T2
T3 HEX
T1
T1
T1
T3
HEX
T4
T4
T4
T4
T5 MAX
T4
T5 MAX
T2
T1
KIT
UNIT
NUMBER
SIZE
mm
in
mm
in
GRM2-SCB-1
2
—
—
13.0
.511
GRM4-SCB-1
4
—
—
13.0
.511
GRM2-SCS-1
SILVER
2
-SCS
—
—
13.0
.511
GRM4-SCS-1
4
—
—
13.0
.511
GRM2-SCG-1
GOLD
-SCG
2
—
—
13.0
.511
GRM4-SCG-1
4
—
—
13.0
.511
GRM2-SDB-1
BLACK
-SDB
2
19.0
.750
22.9
.900
GRM4-SDB-1
4
19.0
.750
25.0
.984
GRM2-SDS-1
SILVER
-SDS
2
19.0
.750
22.9
.900
GRM4-SDS-1
4
19.0
.750
25.0
.984
GRM2-SDG-1
GOLD
-SDG
2
19.0
.750
22.9
.900
GRM4-SDG-1
4
19.0
.750
25.0
.984
GRM2-SUB-1
BLACK
-SUB
2
19.0
.748
19.0
.748
GRM4-SUB-1
4
19.0
.748
19.0
.748
GRM2-DCB-1 1.530 38.9
BLACK
-DCB
2
19.0
.750
GRM4-DCB-1 1.850 47.0
4
19.0
.750
GRM2-DCS-1 1.530 38.9
SILVER
-DCS
2
19.0
.750
GRM4-DCS-1 1.850 47.0
4
19.0
.750
GRM2-DCG-1 1.530 38.9
GOLD
-DCG
2
19.0
.750
GRM4-DCG-1 1.850 47.0
4
19.0
.750
GRM2-DDB-1 1.530 38.9
BLACK
-DDB
2
19.0
.750
GRM4-DDB-1 1.850 47.0
4
19.0
.750
GRM2-DDS-1 1.530 38.9
SILVER
-DDS
2
19.0
.750
GRM4-DDS-1 1.850 47.0
4
19.0
.750
GRM2-DDG-1 1.530 38.9
GOLD
-DDG
2
19.0
.750
GRM4-DDG-1 1.850 47.0
4
19.0
.750
GRM2-DUB-1 1.530 38.9
BLACK
-DUB
2
19.0
.748
GRM4-DUB-1 1.850 47.0
4
19.0
.748
62148-37
BLACK
-SCB*
2
—
—
13.0
.511
62148-33
4
—
—
13.0
.511
62148-38
SILVER
-SCS*
2
—
—
13.0
.511
62148-34
4
—
—
13.0
.511
62148-39
GOLD
-SCG*
2
—
—
13.0
.511
62148-36
4
—
—
13.0
.511
62148-40
—
TIP EXT.**
2
19.0
.750
16.0
.680
62148-35
—
4
19.0
.750
19.9
.785
* FOR USE WITH JAW STYLE H ONLY
** FOR USE WITH JAW STYLES H & J ONLY
PART
COLOR
BLACK
pn
e
OPTION
CODE
-SCB
LETTER DIMENSION
T4
T3
mm
in
mm
in
13.8
.545
—
—
20.4
.804
—
—
13.2
.520
—
—
19.8
.779
—
—
12.9
5.07
—
—
19.5
.766
—
—
13.6
.535
5.0
.197
20.2
.794
5.0
.197
13.0
.510
5.0
.197
19.5
.769
5.0
.197
12.6
.497
5.0
.197
19.2
.756
5.0
.197
13.6
.535
5.0
.197
20.3
.800
5.0
.197
13.8
.545
5.0
.197
20.4
.804
5.0
.197
13.2
.520
5.0
.197
19.8
.779
5.0
.197
12.9
.507
5.0
.197
19.5
.766
5.0
.197
13.6
.535
5.0
.197
20.2
.794
5.0
.197
13.0
.510
5.0
.197
19.5
.769
5.0
.197
12.6
.497
5.0
.197
19.2
.756
5.0
.197
13.8
.545
5.0
.197
20.2
.794
5.0
.197
25.2
.992
—
—
1.344 34.1
—
—
24.6
.967
—
—
1.319 33.5
—
—
24.2
.954
—
—
1.306 33.2
—
—
11.6
.451
5.0
.197
13.7
.540
5.0
.197
T6
T5
in
.039
.039
.039
.039
.039
.039
.059
—
.059
—
.059
—
.236
.236
.039
—
.039
.049
.039
—
.039
—
.039
—
.039
—
.236
.236
.039
.039
.039
.039
.039
.039
—
.130
T5 MAX
mm
1.0
1.0
1.0
1.0
1.0
1.0
1.5
—
1.5
—
1.5
—
6.0
6.0
1.0
—
1.0
1.25
1.0
—
1.0
—
1.0
—
1.0
—
6.0
6.0
1.0
1.0
1.0
1.0
1.0
1.0
—
3.3
in
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1.070
1.375
1.070
1.375
1.070
1.375
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
mm
—
—
—
—
—
—
—
—
—
—
—
—
—
—
27.2
35.0
27.2
35.0
27.2
35.0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
-DCB, -DCS, -DCG
-DDB, -DDS, -DDG
-DUB
DOUBLE CONE POINT
DOUBLE DIAMOND POINT PAD
DOUBLE URETHANE PAD
T5 MAX
T2
T2
T4
T1
T3 HEX
T3 HEX
T5 MAX
T5 MAX
T1
T6
T5 MAX
T5 MAX
T4
T2
T4
T1
T3 HEX
T3 HEX
61
(800) 624-8511
GRM05
MOUNTING THREAD DIMENSIONS: SERIES GRM CLAMPS
ua
ir
e
REAR MOUNTING THREADS
STANDARD IN ALL CLAMPS
MR1
GRM2 T
MR3 LOCKING THREAD
3 PLACES
MR2
MODEL NUMBER
GRM2Tx
GRM4Tx
LETTER
in
mm
DIM
in
mm
1.496
38.0
MR1
1.122
28.5
1.693
43.0
MR2
1.398
35.5
MR3
M6 x 1.0 x .413 [10.5] DP M8 x 1.25 x .512 [13.0] DP
NOTE:
MR1
GRM4 T
MR3 LOCKING THREAD
3 PLACES
MR2
OTHER POSSIBLE MOUNTING THREADS
ALL GRM JAW STYLES
(including Flange Jaw Style)
MT5
pn
e
JAW PIVOT
ALL GRM JAW STYLES
(excluding Flange Jaw Style)
2X MT8
MT2
MT1
MT3
MT7 LOCKING THREAD
2 PLACES
JAW PIVOT
MT2
MT1
2X MT9
MT3
MT6
MT4 LOCKING THREAD
3 PLACES
NOTES:
1) THE IMPACT PLATES HOLD THE PINS, JAW BUSHING, AND SLIDER BUSHINGS
IN PLACE. TAKE CARE NOT TO LOSE THEM IF THE COVERS ARE REMOVED. IF
AN IMPACT PLATE IS REPLACED BY A CUSTOMER MOUNTING PLATE, THE PIVOT
PIN AND SLIDER BUSHING SLOT MUST BE COVERED WITH A SMOOTH SURFACE
TO CONTAIN THE PARTS.
2) FASTENERS THAT ATTACH CUSTOM PLATES MUST NOT BE THREADED INTO THE
SIDES OF THE BODY MORE THAN 8 mm OR THEY MAY INTERFERE WITH AND
DAMAGE THE JAWS.
62
EXISTING PORTS
MODEL NUMBER
LETTER
GRM2xx
GRM4xx
in
mm
DIM
in
mm
.216
5.5
MT1
.131
3.3
1.000
25.4
MT2
.700
17.8
1.400
35.6
MT3
1.000
25.4
MT4
M6 x 1.0 x .315 [8.0] DP M6 x 1.0 x .354 [9.0] DP
3.026
76.9
MT5
2.159
54.8
1.250
31.8
MT6
1.586
40.3
MT7
M6 x 1.0 x .250 [6.3] DP M6 x 1.0 x .472 [12.0] DP
2.520
64.0
MT8
1.783
45.3
.465
11.8
MT9
.374
9.5
(800) 624-8511
GRM05
MT4 LOCKING THREAD
3 PLACES
MOUNTING BRACKET DIMENSIONS: SERIES GRM CLAMPS
JAW PIVOT
PANEL LOCATION
M1
Ø M3 THRU
4X M13
HEX
30°
M11
30°
M10
M12
M2
2 x M14 HEX
M7
MODEL NUMBER
GRM4Cx (GRM2Cx-B08)
GRM2Cx
LETTER
mm
mm
in
in
DIM
101.0
3.504 89.0
3.976
M1
58.5
2.303 58.5
2.303
M2
25.5
1.005 25.5
1.005
M3*
25.4
1.000 25.4
1.000
M4
88.9
3.000 76.2
3.500
M5
149.9
4.850 123.2
5.900
M6
20.3
.800 20.3
.800
M7
85.1
2.500 63.5
3.350
M8
36.8
1.250 31.8
1.450
M9
44.5
1.250 31.8
1.750
M10
63.5
2.500 63.5
2.500
M11
31.8
1.500 38.1
1.250
M12
5.0
5.0
.197
.197
M13
6.0
6.0
.236
.236
M14
*TOLERANCE FOR M3 = ± .002 [±0.05]
15°
Ø M4 TUBE
15°
M6
M8
M9
pn
e
GRMx C
ua
ir
e
90° SPHERICAL MOUNTING BRACKET
M5
NOTES:
2) BRACKET MAY ROTATE 360° ABOUT M4 TUBE AND CLAMP BODY.
KIT NUMBER
GRM2Cx
GRM4Cx (GRM2Cx-B08)
KIT DESCRIPTION
IMPERIAL METRIC IMPERIAL METRIC
90° SPHERICAL MOUNTING BRACKET 64658-02 64658-03 64658-04 64658-05
63
(800) 624-8511
GRM05
GRMx R
ua
ir
e
NON-SPHERICAL MOUNTING BRACKET
Ø M3 THRU
M5
M7
Ø M4 TUBE
M6
M8
M10 RAD
M9
M11 RAD
CLAMP CAN BE
ROTATED 360°
WITHIN BRACKET
.197
[5.0] HEX
M1
NOTES:
1) NUMBER IN [ ] ARE FOR METRIC UNITS AND ARE IN mm.
2) BRACKET MAY ROTATE 360° ABOUT M4 TUBE.
LETTER
DIM
M1
M3*
M4
M5
M6
M7
M8
M9
M10
M11
MODEL NUMBER
GRM2Rx
GRM4Rx
in
mm
in
mm
5.138
130.5
6.969
177.0
1.005
25.13
1.005
25.13
1.000
25.0
1.000
25.0
2.244
57.0
2.618
66.5
5.197
132.0
5.315
135.0
.625
15.9
.750
19.1
2.500
63.5
2.500
63.5
1.476
37.5
1.594
40.5
2.500
63.5
2.500
63.5
1.565
39.8
1.707
43.4
pn
e
* - TOLERANCE FOR M3 = ±.002 [±0.05]
KIT NUMBER
GRM2Rx
GRM4Rx
KIT DESCRIPTION
NON-SPHERICAL MOUNTING BRACKET 62149-02 62196-02 64646-02 64648-02
64
(800) 624-8511
GRM05
GRMx S
GRMx W
ua
ir
e
SPHERICAL MOUNTING BRACKET
M7
M5
Ø M3 THRU
Ø M4 TUBE
30°
30°
M6
M8
M10 RAD
M9
M11 RAD
CLAMP CAN BE
ROTATED 360°
WITHIN BRACKET
.197
[5.0] HEX
M1
NOTES:
1) NUMBER IN [ ] ARE FOR METRIC UNITS AND ARE IN mm.
2) BRACKET MAY ROTATE 360° ABOUT M4 TUBE.
3) W IS FOR OVERSIZE SPHERICAL MOUNTING BRACKET.
MODEL NUMBER
GRM2Sx
GRM4Sx
in
mm
in
mm
5.138 130.5
6.969
177.0
1.005 25.13
1.005
25.13
1.000
25.0
1.000
25.0
2.244
57.0
2.618
66.5
5.197 132.0
5.315
135.0
.625
15.9
.750
19.1
2.500
63.5
2.500
63.5
1.476
37.5
1.594
40.5
2.500
63.5
2.500
63.5
1.565
39.8
1.707
43.4
pn
e
LETTER
DIM
M1
M3*
M4
M5
M6
M7
M8
M9
M10
M11
* TOLERANCE FOR M3 = ±.002 [±0.05]
KIT DESCRIPTION
SPHERICAL MOUNTING BRACKET
LETTER
DIM
M1
M3*
M4**
M5
M6
M7
M8
M9
M10
M11
MODEL NUMBER
GRM4Wx
GRM2Wx
in
mm
in
mm
6.969
177.0
5.138
130.5
1.255
33.90
1.255
33.90
1.250
33.3
1.250
33.3
2.618
66.5
2.618
66.5
6.299
160.0
6.064
154.0
.750
19.1
.625
15.9
3.130
79.5
3.130
79.5
1.711
43.5
1.476
37.5
3.130
79.5
3.130
79.5
1.816
46.1
1.565
39.8
* TOLERANCE FOR M3 = ±.002 [±0.05]
**TOLERANCE FOR [33.3] = [+0.5/-0.0]
KIT NUMBER
GRM2Sx
GRM4Sx
62149-01 62196-01 64646-01 64648-01
KIT NUMBER
GRM4Wx
GRM2Wx
KIT DESCRIPTION
OVERSIZE SPHERICAL MOUNTING BRACKET 62201-01 62201-03 64647-01 64649-01
65
(800) 624-8511
GRM05
GRMx A
GRMx B
ua
ir
e
REAR SPHERICAL MOUNTING BRACKET
M5
M7
.197
[5.0] HEX
15°
M6
15°
Ø M3
M8
Ø M4 TUBE
M9
NOTES:
1) THE SPHERICAL FUNCTION CAN BE ELIMINATED BY ALIGNING THE TUBE WITH THE CLAMP CENTERLINE
AND PUSHING IT IN UNTIL IT BOTTOMS. AT THIS POINT, THE TUBE CAN SPIN, BUT NOT SWIVEL THE 15°.
3) TUBE CAN SPIN 360° ABOUT M4 TUBE.
4) B IS FOR OVERSIZE REAR SPHERICAL MOUNTING BRACKET
MODEL NUMBER
GRM2Bx
GRM4Bx
LETTER
in
mm
in
mm
DIM
1.255
33.9 1.255
33.9
M3*
33.3 1.250
33.3
M4** 1.250
3.000
76.2 3.000
76.2
M5
2.240
56.9 2.500
63.5
M6
2.087
53.0 2.087
53.0
M7
1.305
33.1 1.305
33.1
M8
7.270
184.7 9.908
251.7
M9
* TOLERANCE FOR M3 = ±.002 [±0.05]
**TOLERANCE FOR [33.3] = [+0.5/-0.0]
pn
e
MODEL NUMBER
GRM4Ax
GRM2Ax
LETTER
in
mm
in
mm
DIM
25.13
25.13 1.005
M3* 1.005
25.0
1.000
25.0 1.000
M4
76.2
2.500
63.5 3.000
M5
56.9
1.910
48.5 2.240
M6
45.5
1.791
45.5 1.791
M7
26.5
1.043
26.5 1.043
M8
245.0
7.008
178.0 9.646
M9
* TOLERANCE FOR M3 = ±.002 [±0.05]
KIT NUMBER
GRM2Ax
GRM4Ax
KIT DESCRIPTION
REAR SPHERICAL MOUNTING BRACKET 65008-03 65008-05 65008-04 65008-06
KIT DESCRIPTION
OVERSIZE REAR SPHERICAL MOUNTING BRACKET
66
KIT NUMBER
GRM4Bx
GRM2Bx
65016-03 65016-04 65016-05 65016-06
(800) 624-8511
GRM05
4X THRU HOLE
FOR M7 SHCS
M5
M9
M10 HEX
M8
M3
M6
M4
NOTE:
LETTER
DIM
M3
M4
M5
M6
M7
M8
M9
M10
MODEL NUMBER
GRM4Px
GRM2Px
in
mm
in
mm
1.890
48.0
1.380
35.1
2.992
76.0
2.244
57.0
3.750
95.3
2.750
69.9
2.500
63.5
1.910
48.5
5/16
M8
1/4
M6
.846
21.5
.710
18.0
9.154
232.5
6.675
169.5
.236
6.0
.197
5.0
pn
e
GRMx P
ua
ir
e
REAR MOUNTING PLATE
KIT DESCRIPTION
REAR MOUNTING PLATE
KIT NUMBER
GRM2Px
GRM4Px
65004-03 65004-03 65004-04 65004-04
67
(800) 624-8511
GRM05
ua
ir
e
PORT FITTING DIMENSIONS: SERIES GRM CLAMPS
-LAA OPTION - Metal Fittings
-LBB OPTION - Plastic Fittings
SIZE 2
FITTINGS MAY SWIVEL 360°
FROM LOCATION SHOWN
(WITHOUT MOUNTING BRACKET)
CLOSED PORT
C
PF3
HEX
OPEN PORT
PF2
SELF SEALING SWIVEL
MALE ELBOW FOR
1/4" [6 mm] TUBING
PF1
SIZE 4
PORT FITTING OPTION
LETTER
mm
DIMENSION
in
15.0
PF1 (MIN)
.629
19.0
PF1 (MAX)
.748
22.0
PF2
.885
12.0
PF3
.472
TO ORDER FITTING SEPARATELY,
FOR LAA OPTION:
PART NO. 62178-003 -IMPERIAL
PART NO. 62195-005 -METRIC
FOR LBB OPTION:
PART NO. 71120-001 -IMPERIAL
PART NO. 71121-001 -METRIC
SELF SEALING SWIVEL
MALE ELBOW FOR
1/4" [6 mm] TUBING
C
PF3
HEX
CLOSED PORT
pn
e
OPEN PORT
FITTINGS MAY SWIVEL 360°
FROM LOCATION SHOWN
(WITHOUT MOUNTING BRACKET)
PF2
PF1
NOTE: CLOSED PORTS ARE MARKED WITH THE LETTER C.
PHD, Inc.
9009 Clubridge Drive
P.O. Box 9070, Fort Wayne, Indiana 46899 U.S.A.
Phone (260) 747-6151 • Fax (260) 747-6754
[email protected] • www.phdinc.com
68
PHD GmbH
Arnold-Sommerfeld-Ring 2
D-52499 Baesweiler GERMANY
Phone 02401-805 230 • Fax 02401-805 232
[email protected] • www.phd-gmbh.de
2.5M-I 7/04 6202
(800) 624-8511
GRM05
ua
ir
e
SERIES GRM CLAMP
ACCESSORIES
Flat Proximity Switch
Panel Present Detection
Blade Mounting
Various Tips
Spherical Mounting
pn
e
Side Proximity Switch
Wingtips
30° Tips
Duckbills
AC06
ORDERING DATA INDEX: CLAMP ACCESSORIES
Example:
UNIT SIZE
G GRM
2
ua
ir
e
B
JAW STYLE OPTION
JAW OPENING A
JAW OPENING B
PORT FITTINGS
T S - 2 - 45 DCB - 45 DDB - LAA - ADDITIONAL
OPTIONS
MOUNTING
H
J
DESIGN NO.
2 - Imperial
6 - Metric
JAW TIP OPTIONS JAW A
JAW TIP OPTIONS JAW B
BASE CLAMP NUMBER
ADDITIONAL
M
S
SB - Bxx - Fxx - Gxx - Hxx - JAxx - JBxx - Mxx - Pxx - Sxx - SBxx - Pxxxx Pxxxx
MOUNTING OPTIONS
See Section M
Dxxxx
BODY OPTIONS
See Section B
BORE PLUG OPTIONS
pn
e
FITTING OPTIONS
GENERAL OPTIONS
(MISCELLANEOUS)
See Section G
Kxxxx
IMPACT PLATE OPTIONS
See Section H
PS(R)xxx
JAW OPTIONS - JAW A
See Section J
SJ
JAW OPTIONS - JAW B
See Section J
T
V
KITS
2
© Copyright 2003, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.
(800) 624-8511
AC06
SWITCH OPTIONS
(specific switch)
See Section S
SWITCH MOUNTING
OPTIONS - BODY
See Section SB
SWITCH MOUNTING
OPTIONS
See Section Pxxxx
ua
ir
e
B
G
H
J
OPTIONS
M
S
Dxxxx - Kxxxx - PS(R)xxx - SHxx - SJAxx - SJBxx - TAxxx - TBxxx - Vx
SB
Pxxxx
TIP OPTIONS - JAW A
See Section T
SWITCH MOUNTING
OPTIONS - IMPACT PLATE
SWITCH MOUNTING
OPTIONS - JAW A
See Section SJ
pn
e
SWITCH MOUNTING
OPTIONS
See Section Dxxxx
SWITCH MOUNTING OPTIONS
See Section Kxxxx
SWITCH MOUNTING
OPTIONS - JAW B
See Section SJ
Dxxxx
TIP OPTIONS - JAW B
See Section T
Kxxxx
SEAL OPTIONS
See Section V
PS(R)xxx
See Section PS(R)xxx
SJ
NOTE:
T
UNAVAILABLE OPTIONS AT PUBLISHING TIME
V
KITS
3
(800) 624-8511
AC06
BODY OPTIONS: CLAMP ACCESSORIES
ua
ir
e
B
- Bxx
G
BODY OPTIONS
B04 - Larger port orifices
B05 - Blade mounting
B06 - Rear plate mount with side ports
B07 - Rear plate mount with rear ports
B08 - High force clamp “2 x 4”
B08A - High force clamp “2 x 4” with rear ports
B09 - Position 2 ports
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
4
(800) 624-8511
AC06
B
ua
ir
e
B04
LARGER PORT ORIFICES
This option enlarges both port orifices in the body. It allows the
jaws to open or close much faster than standard. Expect 22° clamps
to open or close faster than 45° clamps, and 45° clamps to open or
close faster than 75° clamps.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
Example Ordering Data:
G
H
PRICE ADDER
$7.50
J
GRM2TS-2-45DCB-45DDB-LAA -B04
SHADED CODES
are required for this option.
M
All unshaded model codes are example only.
For compatibility with other units, consult PHD.
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
BODY PART NUMBER AND PRICES IF ORDERED SEPARATELY
CLAMP
SIZE
2
JAW
STYLE
C, D, H, J, N, P, & S
F, K
PORTS
IMPERIAL METRIC
65312-11 65312-12
65314-11 65314-12
LIST
PRICE
$85.50
$117.65
KITS
5
(800) 624-8511
AC06
B
G
H
B05
BLADE MOUNTING
This option provides mounting that interchanges with Destaco
84A32 series clamps. The body sides have mounting grooves with
two M6 threads per side. The rear surface of the body has four M6
threads. The ports have been moved to position 2. Jaw styles C, D,
G, H, J, N, P, S, F, and K are available with the B05 body. For jaw
dimensions from the pivot pin forward, see the Series GRM catalog.
Mounts R, S, W, A, B, P, and C do not fit on a B05 body.
AVAILABLE ON
GRM2
J
DESIGN NO.
2 [6]
M
ACCESSORY
B05
JAW STYLES
C, D, G, H, J, N, P, & S
(GRM2TS SHOWN)
PRICE ADDER
$24.88
JAW STYLES
F&K
(GRM2TF SHOWN)
GRM2 T S-2-45DCB-45DDB -LAA -B05
SHADED CODES
S
ua
ir
e
2.291
[58.2]
SB
F AND K STYLE JAWS ONLY
2X 1/8 NPT
(1/8 BSPP) PORT
1.724
[43.8]
.374
[9.5]
Pxxxx
2.336
[59.3]
1.969
[50.0]
Dxxxx
1.800
[45.7]
SLOT WIDTH
.315
[8.0]
1.713
[43.5]
4.394
[111.6]
.748 [19.0]
2X 1.187 [30.1]
SLOT WIDTH
pn
e
2
.433
[11.0]
Kxxxx
3
1
.433
[11.0]
JAW PIVOT
JAW A
1.969
[50.0] .709
[18.0]
.709 .748
[18.0] [19.0]
PS(R)xxx
2X M6 x 1.0-6H THD
.500 [12.7] DP
4X M6 x 1.0-6H THD
.500 [12.7] DP
4
SJ
T
V
KITS
4X .273 [6.9] x
45° CHAMFER
Ø .709 x .089 DP
[Ø 18.0 x 2.3 DP]
2X M6 x 1.0-6H THD
.500 [12.7] DP
JAW B
BODY KIT NUMBERS
IMPACT PLATE KITS
KIT
CLAMP
LIST
SIZE & MODEL
PRICE
OPTION IMPERIAL METRIC
2xC, D, G, H, J, N, P, & S B05
65321-03 65321-04 $108.51
2xF & K
65321-05 65321-06 $118.80
B05
Kit includes:
1 Body and Cap
1 Cap Seal and 1 Rod Seal
4 Cap Mounting Screws
Kits replace items #1, 3, 4, and 18 of the part breakdown of the
appropriate clamp. See GRM Clamp catalog.
CLAMP
KIT
IMPACT
LIST
SIZE & MODEL
PLATE EARS NUMBER PRICE
2xC, D, G, H, J, N, P, & S
63967-04 $9.50
0 ears
2xF & K
63967-05 $19.02
0 ears
Kit includes:
2 Impact Plates
Mounting Screws
Kits replace items #5 and 14 of the part breakdown of the
appropriate clamp. See GRM Clamp catalog.
For non-standard impact plate kits, see Section H in the
Clamp Accessories catalog.
6
(800) 624-8511
AC06
REAR PLATE MOUNT
WITH SIDE PORTS
B
ua
ir
e
B06
This option provides a rear mounting plate integral to the body,
ports are located on the sides of the plate. The rear surface has four
M6 threads identical to the T mount and four thru holes identical to
the P mount. Overall length is .55 in [14.0 mm] shorter than a
standard body with a bolt on P mounting plate. The one piece body
is compatible with R, S, W, A & B mounts.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
ACCESSORY
B06
G
JAW STYLES
C, D, G, H, J, N, P, & S
(GRM2TS SHOWN)
PRICE ADDER
$14.95
H
J
SHADED CODES
M
JAW STYLES
F&K
(GRM2TF SHOWN)
S
SB
.624 [15.8]
.624 [15.8]
2.291
[58.2]
2.750
[69.8]
2.336
[59.3]
2.750
[69.8]
F & K STYLES ONLY
Dxxxx
pn
e
2. 244
[57.0]
1.122
[28.5]
.315
[8.0]
4X THRU
HOLE FOR
1/4 [M6]
SHCS
.689
[17.5]
1.910
[48.5]
3.976
[101.0]
2.992
[76.0]
JAW PIVOT
Kxxxx
JAW A
.689
1.380 [17.5]
[35.0]
1.398
[35.5]
1/8 NPT
[1/8 BSPP]
PORT
(OPEN PORT)
Pxxxx
.315
[8.0]
4X M6 x 1.0
LOCKING THD
.413 [10.5] DP
PS(R)xxx
1/8 NPT
[1/8 BSPP] PORT
(CLOSE PORT)
SJ
JAW B
NOTES:
1) ALL DIMENSIONS ARE REFERENCE UNLESS SPECIFICALLY TOLERANCED
2) ALL METRIC DIMENSIONS [ ] ARE GIVEN IN MILLIMETERS 1 mm = .03937 in
T
REPLACEMENT KIT NUMBERS AND PRICES
IF ORDERED SEPARATELY
V
CLAMP
BODY ASSEMBLY NO. LIST
PRICE
ACCESSORY IMPERIAL METRIC
SIZE & MODEL
B06
2xC, D, G, H, J, N, P, & S
65337-11 65337-12 $97.45
B06
2xF & K
65338-11 65338-12 $129.60
KITS
7
(800) 624-8511
AC06
G
H
J
REAR PLATE MOUNT
WITH REAR PORTS
B07
This option provides a rear mounting plate integral to the body,
ports are located on the rear and sides of the plate. Removable port
plugs are installed in the side ports, with the rear ports open.
The rear surface has four M6 threads identical to the T mount
and four thru holes identical to the P mount. Overall length is .55 in
[14.0 mm] shorter than a standard body with a bolt on P mounting
plate. The one piece body is compatible with R, S, W, A &B mounts.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
M
ACCESSORY
B07
JAW STYLES
C, D, G, H, J, N, P, & S
(GRM2TS SHOWN)
PRICE ADDER
$25.75
SHADED CODES
S
ua
ir
e
B
JAW STYLES
F&K
(GRM2TF SHOWN)
SB
.624 [15.8]
.624 [15.8]
Pxxxx
2.750
[69.8]
Dxxxx
2.750
[69.8]
2.291
[58.2]
2.336
[59.3]
F & K STYLES ONLY
1/8 NPT
[1/8 BSPP] PORT
(OPEN PORT)
pn
e
2. 244
[57.0]
1.122
[28.5]
Kxxxx
.315
[8.0]
.689
[17.5]
PS(R)xxx
1.910
[48.5]
SJ
1/8 NPT
[1/8 BSPP] PORT
(OPEN PORT) - PLUGGED
T
.984
[25.0]
(800) 624-8511
AC06
JAW A
1/8 NPT
[1/8 BSPP] PORT
(CLOSE PORT)
1/8 NPT
[1/8 BSPP] PORT
(CLOSE PORT) - PLUGGED
JAW B
NOTES:
BODY ASSEMBLY NO. LIST
CLAMP
PRICE
SIZE & MODEL
B07
2xC, D, G, H, J, N, P, & S
65341-11 65341-12 $108.25
B07
2xF & K
65342-11 65342-12 $140.40
8
JAW PIVOT
.689
[17.5]
.315
[8.0]
V
KITS
1.380
[35.0]
.197
[5.0]
.984
[25.0]
3.976
[101.0]
2.992
[76.0]
.197
[5.0]
1.398
[35.5]
4X M6 x 1.0
LOCKING THD
.413 [10.5] DP
4X THRU HOLE FOR
1/4 [M6] SHCS
B
ua
ir
e
B08
HIGH FORCE CLAMP “2 X 4”
This option provides a clamp with more force (460 lb [2046 N]
with an S jaw style, 360 lb [1601 N] with a K jaw style). The cylinder
portion of the clamp body houses a larger cylinder providing more
clamp force with little added size and only a .45 lb [0.2 kg] weight
adder over GRM2 clamps.
Jaw styles C, D, G, H, J, N, P, S, F, and K are available with the
B08 body. For jaw dimensions from the pivot pin forward, see the
Series GRM catalog. All GRM2 standard and accessory tips fit the
B08. The larger cylinder requires the larger GRM4 mounting brackets.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
ACCESSORY
B08
G
JAW STYLES
C, D, G, H, J, N, P, & S
(GRM2TS SHOWN)
J
PRICE ADDER
$45.00
M
GRM 2 SS-2-45DCB-45DDB-LAA -B08
SHADED CODES
H
JAW STYLES
F&K
(GRM2TF SHOWN)
S
SB
2.291
[58.2]
1.496
[38.0]
pn
e
.768
[19.5]
1/8 NPT
[1/8 BSPP] PORT
(CLOSE PORT)
3X M8 x 1.25
LOCKING THD
.512 [13.0] DP
1.693
[43.0]
.453
[11.5]
Pxxxx
2.336 [59.3]
F & K STYLES ONLY
2.176
[55.3]
4.665
[118.5]
3.465
[88.0]
JAW PIVOT
JAW A
.492
[12.5]
Dxxxx
Kxxxx
1/8 NPT
.453
JAW B
[1/8 BSPP] PORT
1.102
[11.5]
(OPEN PORT)
PS(R)xxx
[28.0]
2.441
[62.0]
NOTES:
SPECIFICATIONS
TOTAL CLAMP FORCE
DISPLACEMENT
CLAMP SIZE
WEIGHT ADDER
at 87 psi [6 bar]
OPEN
CLOSE
& MODEL
kg
lb
N
lb
in3 cm3 in3 cm3
2xC, D, G, H, J, N, P, & S
.45 0.20
460 2046
1.95 32 1.83 30
2xK
.45 0.20
360 1601
1.95 32 1.83 30
2xF
.45 0.20
460 2046
1.95 32 1.83 30
NOTE:
1) For tips, use GRM2 weights, dimensions, and kit numbers.
2) For mounting brackets, use GRM4 weights, dimensions, and kit numbers.
SJ
MOUNTING BRACKET KIT NUMBERS
(use size 4 brackets)
MOUNTING STYLE IMPERIAL METRIC
T
none (std) none (std)
A
65008-04 65008-06
B
65016-05 65016-06
C
64658-04 64658-05
P
65004-04 65004-04
R
64646-02 64648-02
S
64646-01 64648-01
W
64647-01 64649-01
9
(800) 624-8511
AC06
T
V
KITS
G
LIST
CLAMP
BODY ASSEMBLY NO.
PRICE
SIZE & MODEL
B08
2xC, D, G, H, J, N, P, & S
65344-11 65344-12 $124.45
B08
2xF & K
65345-11 65345-12 $124.45
H
J
M
ua
ir
e
B
PRICING EXAMPLE
1
2
3
4
5
GRM2SS-2-45DCB-45DDB-LAA-B08
Base Price for GRM2TS-2-45-45
always use T mounting (standard mounting) = 377.20
Adder for DCB tip (adder x 2 for 2 tips)
=
50.30
Adder for mounting bracket (size 4)
=
48.20
Adder for port fittings
=
6.80
Adder for B08 accessory
=
45.00
LIST PRICE = $527.50
S
JAW A
SB
Pxxxx
JAW B
Dxxxx
CLOSE PORT
pn
e
OPEN PORT
Kxxxx
PS(R)xxx
SJ
T
V
KITS
10
(800) 624-8511
AC06
HIGH FORCE CLAMP “2 X 4”
W/REAR PORTS
B
ua
ir
e
B08A
This option provides a clamp with more force (see specification
table below) and ports located in the slides and rear of the clamp.
Removable port plugs are installed in the side ports, with the rear
ports open. The cylinder portion of the clamp body houses a larger
cylinder providing more clamp force with little added size and only a
.82 lb [0.37 kg] weight adder over GRM2 clamps.
Jaw styles C, D, G, H, J, N, P, S, F, and K are available with the
B08A accessory. For jaw dimensions from the pivot pin forward, see the
Series GRM catalog. All GRM2 standard and accessory tips fit the
B08A. The larger cylinder requires the larger GRM4 mounting brackets.
(Mounting style A, B, and P are NOT available with this accessory.)
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
ACCESSORY
B08A
G
H
JAW STYLES
C, D, G, H, J, N, P, & S
(GRM2TS SHOWN)
M
PRICE ADDER
$72.05
JAW STYLES
F&K
(GRM2TF SHOWN)
GRM 2 TS-2-45DCB-45DDB-LAA -B08A
SHADED CODES
J
S
SB
1.168
[29.7]
1.368
[34.7]
Pxxxx
5.290
[134.4]
2X .276
[7.0]
pn
e
Dxxxx
Kxxxx
1/8 NPT
[1/8 BSPP PORT]
(CLOSE PORT) - PLUGGED
1/8 NPT
[1/8 BSPP PORT]
(CLOSE PORT)
1/8 NPT
[1/8 BSPP PORT]
(OPEN PORT) - PLUGGED
.890
[22.6]
.315
[8.0]
PS(R)xxx
NOTES:
SPECIFICATIONS
TOTAL CLAMP FORCE
CLAMP SIZE
WEIGHT ADDER
at 87 psi [6 bar]
& MODEL
kg
lb
N
lb
2xC, D, G, H, J, N, P, & S
.82 0.37
460 2046
2xK
.82 0.37
360 1601
2xF
.82 0.37
460 2046
1/8 NPT
[1/8 BSPP PORT]
(OPEN PORT)
DISPLACEMENT
OPEN
CLOSE
in3 cm3 in3 cm3
1.95 32 1.83 30
1.95 32 1.83 30
1.95 32 1.83 30
NOTES:
1) For tips, use GRM2 weights, dimensions, and kit numbers.
2) For mounting brackets, use GRM4 weights, dimensions, and kit numbers.
MOUNTING BRACKET KIT NUMBERS
(use size 4 brackets)
MOUNTING STYLE
T
C
R
S
W
IMPERIAL
none (std)
64658-04
64646-02
64646-01
64647-01
METRIC
none (std)
64658-05
64648-02
64648-01
64649-01
NOTE: Mounting style A, B, & P not available
with this accessory.
11
(800) 624-8511
AC06
SJ
T
V
KITS
B
G
H
J
M
B09
ua
ir
e
POSITION 2 PORTS
This option provides both ports in position 2 of clamp (jaw A
side of clamp). All jaw styles are available with the B09 body option.
For jaw dimensions from the pivot pin forward, see the Series GRM
catalog.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
ACCESSORY
B09
JAW STYLES
C, D, G, H, J, N, P & S
(GRM2TS SHOWN)
PRICE ADDER
$8.30
SHADED CODES
JAW STYLES
F&K
(GRM2TF SHOWN)
S
1/8 NPT [1/8 BSPP] PORT
(CLOSE PORT)
SB
.522
[13.3]
(CLOSE PORT)
.522
[13.3]
Pxxxx
.522
[13.3]
.522
[13.3]
2X 1.516
[38.5]
Dxxxx
2X 1.516
[38.5]
(OPEN PORT)
(OPEN PORT)
F & K STYLES ONLY
2
pn
e
.561
[14.2]
Kxxxx
3X M6 X 1.0
SELF LOCKING THD
.420 [10.7] DP
3.819
[97.0]
JAW A
PS(R)xxx
3 1.398
[35.5]
1
SJ
1.122
[28.5]
4
T
V
BODY PART NUMBER AND PRICES IF ORDERED SEPARATELY
CLAMP
SIZE
2
KITS
JAW STYLE
C, D, G, H, J, N, P, & S
F, K
PORTS
IMPERIAL METRIC
65368-11 65368-12
65371-11 65371-12
LIST
PRICE
$86.30
$118.45
12
(800) 624-8511
AC06
JAW B
NOTES:
1) ALL DIMENSIONS ARE REFERENCE UNLESS SPECIFICALLY TOLERANCED.
3) NUMBERS IN CIRCLES INDICATE POSITION (POSITION 2 IS PORT SIDE OF CLAMP).
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
13
(800) 624-8511
AC06
B
- Gxx
G
GENERAL (MISCELLANEOUS) OPTIONS
G01 - Continuity path
G02 - Continuity path
G07 - Aluminum jaw clamp
G08 - Lifting jaws
G09 - Lifting jaws
G10 - Flip over jaw clamp
H
J
ua
ir
e
GENERAL OPTIONS: CLAMP ACCESSORIES
WIRING SCHEMATICS
INSULATING PLATE
S
CURRENT FLOW
RAIL
RAIL
M
INSULATING PLATE
+24
SB
INPUT
POWER
SUPPLY
Ø VDC
Pxxxx
COMMON
CURRENT SOURCING APPLICATION
INSULATING PLATE
pn
e
CURRENT FLOW
RAIL
RAIL
INSULATING PLATE
Dxxxx
CURRENT
SINKING
INPUT
MODULE
Kxxxx
INPUT
+24
Ø VDC POWER
SUPPLY Ø VDC
PS(R)xxx
CURRENT
+24 VDC SOURCING
INPUT
MODULE
Ø VDC
COMMON
CURRENT SINKING APPLICATION
(with external supply)
RAIL
INSULATING PLATE
T
CURRENT FLOW
V
CURRENT SINKING APPLICATION
(with internal supply)
KITS
14
(800) 624-8511
INSULATING PLATE
AC06
RAIL
SJ
INPUT
CURRENT
SOURCING
INPUT
Ø VDC MODULE
COMMON
B
ua
ir
e
G01 to G02
CONTINUITY PATH
This option provides a continuity path through the clamp for
low voltage current. The current can be used as a signal to indicate a
panel present. If a circuit is made (through one clamp, the panel,
and the opposite clamp) then a panel is being gripped. The
controller senses a high/low condition. No proximity switches are
required.
A special pivot pin with a M6 thread on one end extends
through the retaining plate and hardened impact plate. Full impact
plate adjustment is retained. A flanged locknut is provided to clamp
your connector against the shoulder of the M6 thread.
No special tips, jaws, or switches are required.
The continuity feature does not work with urethane tips.
The G02 accessory is not available for GRMxxF clamps.
G
H
J
G01 SHOWN
M
AVAILABLE ON DESIGN NO. ACCESSORY PRICE ADDER
G01 or G02
$30.48
GRM2
2 [6]
G01 or G02
$37.50
GRM4
2 [6]
Price adder is for special pivot pin, impact plate, and nut mounted on clamp.
GRM2TS-2-45DCB-45DDB-LAA -G01
SHADED CODES
S
M6 THREAD
ACCESSORY POSITION
3 Opp Ports
G01
1 Port Side
G02
1.397
[35.5]
SB
2
.394 [10.0] HEX
Pxxxx
.551
[14.0]
1
Dxxxx
3
pn
e
M6 x 1.0 STUD
SUPPLIED BY CUSTOMER
Ø .240 [6.1] MIN
Ø .630 [16.0] MAX
4
NOTES:
PS(R)xxx
REPLACEMENT KIT NUMBERS AND PRICES IF ORDERED SEPARATELY
CLAMP
SIZE
2xS
2xC
2xD
2xS
2xC
2xD
2xH
2xJ
2xF
2xX
4xS
4xS
4xH
4xJ
4xF
4xX
Kxxxx
Kit includes:
Pivot Pin
Retaining Plate
Impact Plate
Flange Locknut
3 Screws
ACCESSORY
JAW
ROTATION
IMPACT
PLATE EARS
KIT
NUMBER
LIST
PRICE
G01, G02
75x75, 45x45, 22x22
2
65467-05
$30.48
G01, G02
75x00, 45x00, 22x00
1
65467-04
$30.48
T
G01 only
G01, G02
G01, G02
85x00, 50x00, 50x22
special
75x75, 45x45, 22x22
1
0
2
65467-06
65467-03
65467-09
$30.48
$30.48
$37.50
V
G01, G02
75x00, 45x00, 22x00
1
65467-08
$37.50
G01 only
G01, G02
85x00, 50x00
special
1
0
65467-10
65467-07
$37.50
$37.50
SJ
KITS
15
(800) 624-8511
AC06
G
H
J
G07
ALUMINUM JAW CLAMP
(BOTH JAWS ROTATE)
This option provides a GRM clamp with hardcoated aluminum
jaws that reduce the weight of the clamp by 0.6 lb [0.3 kg]. Both jaws
accept all Series GRM standard and accessory tips. Jaw rotations are
the same as standard GRM clamps. Consult PHD for additional
accessory compatibility. Not available with G01 and G02 options.
No-ear impact plates are standard with this option.
AVAILABLE ON
DESIGN NO.
PRICE ADDER
GRM2
2 [6]
$2.00
Price adder is for two aluminum jaws mounted to
the clamp.
M
GRM2TS-2-45-45 SHOWN
CLAMP SIZE
& MODEL
2xS
GRM2T S -2-45DCB-45DDB-LAA -G07
SHADED CODES
S
ua
ir
e
B
JAW PART NUMBER AND PRICE
LIST
CLAMP
JAW PART
PRICE
SIZE
NUMBER
2
65202-01 $130.80
SB
B4
(CLOSED)
M1
REPLACEMENT KIT NUMBER AND Kit includes:
PRICE IF ORDERED SEPARATELY
1 Jaw Driver Pin
1 Pivot Pin
LIST
KIT
CLAMP
4 Slider Bushings
PRICE
NUMBER
SIZE
1 O-Ring
65275-03 $27.15
2
O-Ring used with 0° Jaws only
J7
Pxxxx
F1 (ADJUSTABLE)
Dxxxx
LETTER
DIM
B4
F1 MAX
F2 MIN
J1
J7
J14
J16
M1
MODEL NUMBER
mm
in
168.5
6.634
43.0
1.693
30.0
1.182
87.4
3.439
59.5
2.343
43.7
1.720
27.0
1.064
135.5
5.335
LETTER
DIM
B4
J1
S1
T2
AVAILABLE ROTATIONS
75° x 75°
45° x 45°
22° x 22°
mm
in
mm
in
mm
in
5.706 144.9 6.302 160.1
4.512 114.6
5.107 129.7 4.147 105.3
5.828 148.0
5.0
.197
5.0
.197
—
—
39.1
1.541
2.853 72.5
3.851 97.8
J1
pn
e
J16
(PARALLEL)
Kxxxx
J14
JAW PIVOT
S1 HEX
PS(R)xxx
JAW PIVOT
SJ
T2
J1
(OPEN)
T
B4
(OPEN)
V
KITS
NOTES:
1) ALL DIMENSIONS ARE REFERENCE UNLESS SPECIFICALLY TOLERENCED
16
(800) 624-8511
SPECIFICATIONS
WEIGHT
LENGTH TOTAL CLAMP FORCE
at 87 psi [6 bar]
REDUCER
ADDER
kg
in
mm
lb
N
lb
.30
.197 5.0
145
645
.60
AC06
ALUMINUM JAW CLAMP
B
ua
ir
e
G07
(JAW A ROTATES ONLY)
This option provides a GRM clamp with hardcoated aluminum
jaws that reduce the weight of the clamp by 0.6 lb [0.3 kg]. Both jaws
accept all Series GRM standard and accessory tips. Jaw rotations are
the same as standard GRM clamps. Consult PHD for additional
accessory compatibility. Not available with G01 and G02 options.
No-ear impact plates are standard with this option.
G
H
AVAILABLE ON
DESIGN NO.
PRICE ADDER
GRM2
2 [6]
$2.00
Price adder is for two aluminum jaws mounted to
the clamp.
GRM2T S -2-45DCB- 00 DDB-LAA -G07
SHADED CODES
CLAMP SIZE
& MODEL
2xS
M
JAW
CLAMP
JAW PART LIST
ROTATION NUMBER PRICE
SIZE
00°
2
65241-01 $149.50
22°, 45°, 75° 65202-01 $130.80
2
S
SB
REPLACEMENT KIT NUMBER AND Kit includes:
1 Jaw Driver Pin
1 Pivot Pin
LIST
KIT
CLAMP
4 Slider Bushings
PRICE
NUMBER
SIZE
1 O-Ring
65275-03 $27.15
2
O-Ring used with 0° Jaws only
B4
(CLOSED)
M1
J7
F1
(ADJUSTABLE)
J14
JAW PIVOT
S1 HEX
JAW PIVOT
J1
T2 (OPEN)
J14
J15
(OPEN)
B4
(OPEN)
NOTES:
1) ALL DIMENSIONS ARE REFERENCE UNLESS SPECIFICALLY TOLERENCED
Pxxxx
MODEL NUMBER
LETTER GRM2xS-x-22xxx-00xxx
mm
in
DIM
168.5
6.634
B4
43.0
1.693
F1 MAX
30.0
1.182
F2 MIN
67.8
2.669
J1
59.5
2.343
J7
24.1
.950
J14
27.0
1.064
J16
135.5
5.335
M1
pn
e
J1
J16
(PARALLEL)
J6
(OPEN)
J
SPECIFICATIONS
WEIGHT
LENGTH TOTAL CLAMP FORCE
at 87 psi [6 bar]
REDUCER
ADDER
kg
in
mm
lb
N
lb
.30
.197 5.0
145
645
.60
LETTER
DIM
B4
J1
J6
J14
J15
S1
T2
Dxxxx
Kxxxx
PS(R)xxx
SJ
AVAILABLE ROTATIONS
75° x 00°
45° x 00°
22° x 00°
mm
in
mm
in
mm
in
6.634 168.5 6.634 168.5
6.634 168.5
76.8
3.024
3.503 89.0
3.864 98.1
52.7
2.074
2.553 64.8
2.914 74.0
24.1
.950
24.1
.950
24.1
.950
27.6
1.088
1.496 38.0
1.863 47.3
5.0
.197
5.0
.197
—
—
19.6
.770
1.427 36.2
1.920 48.8
T
V
KITS
17
(800) 624-8511
AC06
B
G
H
J
G08 or G09
LIFTING JAWS
These options provide standard jaws with special cam slots
that increase the clamp’s ability to pick up heavier loads as the jaws
begin to close. Both jaws accept all Series GRM standard and
accessory tips. These jaws have shorter locking ramps and require a
different tip color code versus material thickness (see chart below).
New red tips replace gold tips for panel thickness of 2.5 - 3.5 mm
for this accessory only. G08 jaws (colored gold) open a maximum
of 45° and have the greatest lifting ability. G09 jaws (colored silver)
open a maximum of 75° with more lifting ability than the standard S
jaw style.
AVAILABLE ON
GRM2
M
ua
ir
e
DESIGN NO.
2 [6]
G08 SHOWN
PRICE ADDER
$10.00
SPECIFICATIONS
CLAMP SIZE
& OPTIONS
GRM2-G08
GRM2-G09
GRM2-B08-G08
GRM2-B08-G09
GRM2T S -2- 75 DCB- 75 DDB-LAA -G08
S
SHADED CODES
SB
GRMxxS-x-75xxx-75xxx-G09
B4
(OPEN)
B4
(OPEN)
Pxxxx
LIFTING FORCE
AT 87 psi [6 bar]
N
lb
89
20
49
11
155
35
93
21
S1 HEX
Dxxxx
JAW
PIVOT
JAW
PIVOT
J1
(OPEN)
pn
e
T2
T2 J1
(OPEN)
T3
Kxxxx
J6
(OPEN)
COLORED
GOLD
T3
J6
(OPEN)
COLORED
SILVER
PS(R)xxx
LETTER DIM.
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
T2
T3
SJ
G08
mm
in
5.545 140.8
4.805 122.0
61.0
2.403
5.0
.197
65.6
2.584
32.8
1.292
G09
mm
in
4.437 112.7
5.444 138.3
2.722 69.1
—
—
3.453 87.7
1.727 43.9
NOTES:
T
V
KITS
SPECIAL JAW PART NUMBERS AND PRICES
LIST PRICE
ROTATION
OPTION PART NUMBER
$129.30
65268-02
22° x 22°, 45° x 45°
G08
65269-02
22° x 22°, 45° x 45°, 75° x 75° $129.30
G09
18
(800) 624-8511
AC06
JAW TIP OPTIONS - JAW A OR B
MATERIAL THICKNESS
0 to
1.5 to 2.5 to
1.5 mm 2.5 mm 3.5 mm
Color
Black
Silver
Red
No tip
Blank
Blank
Blank
Single Cone Point
SCB
SCS
SCR
Double Cone Point
DCB
DCS
DCR
SDB
SDS
SDR
Double Diamond Point DDB
DDS
DDR
Single Urethane Pad
SUB
SUB
SUB
Double Urethane Pad
DUB
DUB
DUB
B
ua
ir
e
G10
FLIP OVER JAW CLAMP
(FOR USE WITH SERIES GRM4xS
CLAMPS ONLY)
This option provides jaws that are longer than standard. They
are useful when you need to reach over panels with uneven edges or
cutouts that occur frequently in flip over applications.
AVAILABLE ON
GRM4
DESIGN NO.
2 [6]
G
H
PRICE ADDER
$115.40
GRM4T S -2-80DCB-80DDB-LAA -G10
SHADED CODES
MODEL
GRM4xS-x-80-80
GRM4xS-x-45-45
GRM4xS-x-22-22
10.298
[261.6]
4.314
[109.6]
SPECIFICATIONS
UNIT WEIGHT* TOTAL CLAMP FORCE
kg
lb
N
lb
5.3
2.40
326
S
1450
SB
Pxxxx
4.913
[124.8]
4.724 (CLOSED)
[120.0]
(CLOSED)
1.250
[31.8]
pn
e
2 STOP BLOCKS REQUIRED
M
.492
[12.5]
3.625 [92.1] MAX
2.875 [73.0] MIN
GRM4xS-x-80xxx-80xxx-G10
J
LIST
CLAMP
JAW
JAW PART
PRICE
SIZE
ROTATION
NUMBER
$218.85
4
80°, 45°, 22° 65255-01
Dxxxx
9.811
[249.2]
7.776
[197.5]
9.051
[229.9]
6.299
[160.0]
Kxxxx
PS(R)xxx
8.147
[206.9]
5.128
[130.3]
3.051
[77.5]
6.762
[171.8]
SJ
9.804
[249.0]
T
NOTES:
V
KITS
19
(800) 624-8511
AC06
IMPACT PLATE OPTIONS: CLAMP ACCESSORIES
ua
ir
e
B
- Hxx
G
H
IMPACT PLATE OPTIONS
NON-STANDARD POSITION
H01
3
H02
1
H03
3
H04
1
H05
3
H06
1
H07
3
H08
1
H09
1
H10
1
H11
3
H12
3
H13
—
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
20
(800) 624-8511
AC06
ua
ir
e
B
H01 to H08
This option provides standard impact plates mounted in
nonstandard orientations.
H02, H04, H06, and H08 options are not available for
GRMxxF, and GRMxxK clamps.
AVAILABLE ON
GRM2 or GRM4
DESIGN NO.
2 [6]
G
PRICE ADDER
$0.00
H
IMPACT PLATE IN POSITION 3
GRM2TS-2-45DCB-45DDB-LAA -H06
SHADED CODES
J
GRM CLAMP
ASSEMBLY
H07
H01
M
H03
S
H05
IMPACT PLATE IN POSITION 1
H06
OPTION
H01
H02
H03
H04
H05
H06
H07
H08
H04
H02
H08
3
Dxxxx
PS(R)xxx
NOTE:
IMPACT
ACCESSORY PLATE EARS
1
H01-H04
0
H05-H06
2
H07-H08
1
H01-H04
0
H05-H06
2
H07-H08
Pxxxx
Kxxxx
1
4
CLAMP
SIZE
2
2
2
4
4
4
SB
2
pn
e
IMPACT PLATE
SOCKET HEAD
CAP SCREW
IMPACT PLATE MOUNTING
IMPACT PLATE
EAR
LOCATION
ORIENTATION
(POSITION)
(POSITION)
3
2
1
2
3
4
1
4
3
—
1
—
3
—
1
—
KIT
LIST
NUMBER PRICE
63967-01 $9.50
63967-04 $9.50
63967-02 $9.05
64638-01 $13.40
64638-04 $13.40
64638-02 $13.40
SJ
T
Kit includes:
2 Impact Plates
6 Screws
V
KITS
21
(800) 624-8511
AC06
B
G
H
ua
ir
e
H09 to H12
CABLE PROTECTION PLATE
This option provides a steel cable protector plate for S01 switches.
H09 and H10 options are not available for GRMxxF and GRMxxK
clamps.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
ACCESSORY
H09, 10, 11, or 12
PRICE ADDER
$14.39
Price adder is for a cable protector mounted on a clamp.
J
M
GRM2TS-2-45 blank -45 blank -LAA -H10 -S01 -TA022 -TB025
SHADED CODES are required for this option.
BORDERED CODES will normally be ordered.
POSITION 3
GRM CLAMP
ASSEMBLY
S
H12
SB
H11
POSITION 1
Pxxxx
Dxxxx
pn
e
H10
Kxxxx
IMPACT PLATE
SOCKET HEAD
CAP SCREW
PS(R)xxx
H09
2
SJ
1
3
T
4
NOTE:
V
KITS
PROTECTOR PLATE PART NUMBER AND
CLAMP
SIZE
2
PART NUMBER
65116-01
LIST PRICE
$14.39
22
(800) 624-8511
AC06
PROTECTOR PLATE MOUNTING
PROTECTOR PLATE CORDSET LOCATION
OPTION LOCATION (POSITION)
(POSITION)
H09
1
2
H10
1
4
H11
3
2
H12
3
4
IMPACT PLATE OPTION: CLAMP ACCESSORIES
IMPACT PLATE OPTION FOR
Pxxxx OR Dxxxx
B
ua
ir
e
H13
This option provides an impact plate mounted below the switch
housing of Pxxxx or Dxxxx options. The impact plate protrudes past
the face of the switch housing protecting it from damage. No-ear
impact plates are standard with this option.
The H13 option is not required when ordering the Kxxxx option
(impact plates are standard with this option).
G
H
AVAILABLE ON
DESIGN NO.
PRICE ADDER
GRM2
2 [6]
$9.35
Price adder is for one impact plate mounted to the clamp.
H13-P3Dxx SHOWN
J
GRM2TS-2-45DCB-45DDB-LAA -H13 -P3D00
SHADED CODES
M
S
SB
1.461
[37.1]
Pxxxx
2.836
[72.0]
1.782 MAX
[45.3]
1.322
[33.6]
pn
e
1.322
[33.6 ]
Dxxxx
1.512 MIN
[38.4]
JAW A
SWITCH CABLE EXIT LOCATION
(P3xxx AND D3xxx SHOWN)
PANEL PRESENT
PANEL PRESENT
1
1
6
7
5
2
LEVER
POSITION
3
6
1
3
7
5
LEVER
POSITION
3
JAW B
.220
[5.6]
SJ
4
EXTENDED POSITION
RETRACTED POSITION
NOTES:
1) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERENCED
3) NUMBERS IN CIRCLES INDICATE POSITION (POSITION 1 IS PORT SIDE OF CLAMP)
T
REPLACEMENT KIT NUMBER AND PRICE
CLAMP
SIZE
ACCESSORY
2
H13
Kit Includes:
1 Impact Plate
KIT
NUMBER
72210-03
PS(R)xxx
4
4
2
Kxxxx
1.175
[29.8]
2.350
[59.7]
ADJUSTMENT DIRECTION
2
V
LIST
PRICE
$9.35
KITS
23
(800) 624-8511
AC06
JAW OPTIONS: CLAMP ACCESSORIES
ua
ir
e
B
- JAxx
G
H
J
- JBxx
JAW OPTIONS - JAW A
JA02 - Drop jaw clamp
M
S
SB
Pxxxx
pn
e
Dxxxx
JAW OPTIONS - JAW B
JB01 - Double chisel modified for use with
TA025 through TA027 options
JB02 - Drop jaw clamp
JB03x - Switch mounting jaw clamp for use
with Series GRM2xM Clamps only
Kxxxx
PS(R)xxx
SJ
T
V
KITS
24
(800) 624-8511
AC06
B
ua
ir
e
JB01
DOUBLE CHISEL ON JAW B
TA025 - TA027
This option modifies a chisel jaw to work with the optional tip
TA025-TA027 and switch S01. It removes material from the front of
the chisel directly in line with the switch sensing area, allowing the
jaws to close with no panel gripped and the switch will not sense the
jaw tip.
JAW A
G
S01
H
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
JAW B
PRICE ADDER
$35.00
JB01
J
Price adder is for jaw only.
See Section S for S01 option.
See Section T for TA025 through TA027 options.
M
GRM2T D -2-45 blank -00-LAA -JB01 -S01 -TA025 through TA027
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
JAW PART NUMBER AND PRICES
CLAMP
SIZE
2
LIST PRICE
0°
65206-02
$163.55
ROTATION
22°
45°
65207-02 65207-02
$172.80
$172.80
V
75°
65207-02
$172.80
KITS
25
(800) 624-8511
AC06
G
H
J
DROP JAW CLAMP
Jx02
ua
ir
e
B
(A ON JAW A, B ON JAW B)
This option provides a standard jaw with a special cam slot that
reduces jaw opening. Assembled with a normal rotation jaw, it
creates a clamp with jaws that open different amounts. Providing
reduced opening (30°) for die clearance on one side and maximum
opening (75°) for panel clearance on the other side. Using the stop
reduces rotation of both jaws to 22 x 45 for additional flexibility. All
components are standard per the latest GRM catalog except the
reduced jaw.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
M
PRICE ADDER
$0.00
GRM2T S -2- 30 DCB- 75 DDB-LAA -JA02
JA02 SHOWN
S
SB
GRMxxS-x-30xxx-75xxx-JA02
GRMxxS-x-75xxx-30xxx-JB02
GRMxxS-x-22xxx-45xxx-JA02
GRMxxS-x-45xxx-22xxx-JB02
Stop block not required
One stop block required
B4
(OPEN)
Pxxxx
B4
(OPEN)
S1 HEX
Dxxxx
JAW PIVOT
pn
e
JAW PIVOT
Kxxxx
T2
J1
(OPEN)
T2
T3
T3
PS(R)xxx
J6
(OPEN)
SJ
LETTER DIM.
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
T2
T3
T
V
SIZE 2
mm
in
5.968 151.6
4.794 121.8
2.697 68.5
2.596 65.9
1.683 42.7
SPECIAL JAW PART NUMBER AND
CLAMP
SIZE
2
KITS
SPECIAL JAW NUMBER
22° or 30°
LIST PRICE
65208-02
$124.30
26
(800) 624-8511
AC06
J1
(OPEN)
J6
(OPEN)
LETTER DIM.
B4 (OPEN)
J1 (OPEN)
J6 (OPEN)
S1
T2
T3
SIZE 2
mm
in
6.119 155.4
4.369 111.0
2.402 61.0
5.0
.197
1.990 50.5
1.291 32.8
NOTES:
B
ua
ir
e
JB03x
SWITCH MOUNTING JAW CLAMP
(FOR USE WITH SERIES GRM2xM
CLAMPS ONLY)
This option provides a lower flat shovel jaw with the ability to
mount the S01 switch accessory. It can be ordered with or without a
specially designed double cone point tip. This tip is designed in such
a way that the S01 switch will not give a false reading when there is
no panel between the jaws. Also included is a special impact plate that
protects the switch cable as it is routed away from the switch.
G
H
AVAILABLE ON DESIGN NO. ACCESSORY
DESCRIPTION
PRICE ADDER
JB030
Switch ready jaw - No tip included
$42.40
JB031
$67.55
Switch ready jaw - Black tip included
GRM2xM
2 [6]
JB032
$67.55
Switch ready jaw - Silver tip included
JB033
$67.55
Switch ready jaw - Gold tip included
NOTE:
JB03x accessory does not include switch.
J
GRM2TM-2-85-00-JB031-S01
SHOWN
M
GRM2T M -2-85 blank -00-LAA -JB031 -S01
S
85°
SB
All non-bold codes are for example only.
2.841
[72.2]
Pxxxx
Dxxxx
pn
e
.894 [22.7] MAX
.315 [8.0] MIN
45°
1.420
[36.1]
GRM2
KIT/PART
DESCRIPTION
Jaw Kit - No tip
Tip Kit - Black
Tip Kit - Silver
Tip Kit - Gold
Switch Kit - S01
KIT/PART
NUMBER
73068-03
73068-04
73068-05
73068-06
65136-11
MATERIAL
LIST
THICKNESS PRICE
——
$75.45
0-1.5 mm
$55.25
1.51-3.0 mm $55.25
3.01-4.0 mm $55.25
——
$193.55
22°
T
V
.393
[10.0]
KITS
27
(800) 624-8511
AC06
PS(R)xxx
SJ
.059 [1.5]
DISTANCE FROM SWITCH
FACE TO JAW FACE
CLAMP
SIZE
Kxxxx
MOUNTING OPTIONS: CLAMP ACCESSORIES
ua
ir
e
B
- Mxx
G
H
M01 M02 M03 M04 M07 -
J
M
S
SB
Pxxxx
pn
e
Dxxxx
MOUNTING OPTIONS
30 mm spherical mounting bracket
30 mm non-spherical mounting bracket
Rigid rear mounting bracket
Rigid rear mounting bracket
32 mm spherical mounting bracket
Kxxxx
PS(R)xxx
SJ
T
V
KITS
28
(800) 624-8511
AC06
B
ua
ir
e
M01
30 mm SPHERICAL MOUNTING BRACKET
This option provides a spherical side mounting bracket for a
30 mm tube.
AVAILABLE ON
GRM2 or GRM4
G
H
DESIGN NO. PRICE ADDER
2 [6]
$52.20
Price adder is for bracket only.
J
GRM2 T S-2-45DCB-45DDB-LAA -M01
SHADED CODES
M
PATENT #5,941,513
S
M7
Ø M3 THRU
M5
SB
Ø M4 TUBE
30°
Pxxxx
30°
M6
M8
Dxxxx
M10 RAD
pn
e
M9
CLAMP CAN BE ROTATED
360° WITHIN BRACKET
M11 RAD
CLAMP
SIZE
2
4
M1
mm
in
5.138 130.5
6.969 177.0
M3
in
1.186
1.186
M4
mm
30.1
30.1
in
1.181
1.181
M5
mm
30.0
30.0
in
2.618
2.618
mm
66.5
66.5
Kxxxx
.197 [5.0] HEX
M1
NOTES:
3) BRACKET MAY ROTATE 360° ABOUT M4 TUBE
LETTER DIMENSION
M6
M7
in
in
mm
mm
6.064 154.0 .625 15.9
6.299 160.0 .750 19.1
M8
in
mm
3.130 79.5
3.130 79.5
M9
in
mm
1.476 37.5
1.711 43.5
M10
in
mm
3.130 79.5
3.130 79.5
SJ
M11
in
mm
1.565 39.8
1.786 45.4
T
REPLACEMENT KIT NUMBERS AND
PRICES IF ORDERED SEPARATELY
CLAMP
SIZE
2
4
KIT
NUMBER
65001-01
65001-06
LIST
PRICE
$52.20
$52.20
V
Kit includes:
2 Bracket Halves
1 Spherical Ball
3 Screws
KITS
29
(800) 624-8511
AC06
PS(R)xxx
B
G
H
M02
ua
ir
e
30 mm NON-SPHERICAL MOUNTING BRACKET
This option provides a non-spherical side mounting bracket for
a 30 mm tube.
AVAILABLE ON DESIGN NO. PRICE ADDER
GRM2 or GRM4
2 [6]
$52.75
J
SHADED CODES
M
S
M5
M7
Ø M3 THRU
Ø M4 TUBE
SB
Pxxxx
M6
M8
Dxxxx
M10 RAD
pn
e
M9
CLAMP CAN BE
ROTATED 360°
WITHIN BRACKET
M11 RAD
Kxxxx
.197 [5.0] HEX
PS(R)xxx
CLAMP
SIZE
2
4
SJ
M1
in
mm
5.138 130.5
6.969 177.0
M3
in
1.186
1.186
M4
mm
30.1
30.1
in
1.181
1.181
M5
mm
30.0
30.0
in
2.618
2.618
mm
66.5
66.5
KITS
CLAMP
SIZE
2
4
KIT
NUMBER
65001-02
65001-07
LIST
PRICE
$52.75
$52.75
Kit includes:
2 Bracket Halves
3 Screws
30
(800) 624-8511
NOTES:
LETTER DIMENSION
M6
M7
in
in
mm
mm
6.064 154.0 .625 15.9
6.299 160.0 .750 19.1
T
V
M1
AC06
M8
in
mm
3.130 79.5
3.130 79.5
M9
in
mm
1.476 37.5
1.711 43.5
M10
in
mm
3.130 79.5
3.130 79.5
M11
in
mm
1.565 39.8
1.786 45.4
B
ua
ir
e
M03
RIGID REAR MOUNTING BRACKET
This option provides an aluminum rear mounting bracket for a
1.0 inch [25.0 mm] diameter tube internally or a 1.874 inch [47.6 mm]
diameter externally.
AVAILABLE ON
DESIGN NO.
GRM2
2 [6]
GRM4
2 [6]
G
PRICE ADDER
$46.35
$45.00
H
J
SHADED CODES
M
S
SB
.197 [5.0] HEX
2.500
[63.5]
3X M3 HEX
Ø 1.012
[25.7]
M1
Pxxxx
.886
[22.5]
Dxxxx
M4
pn
e
Ø 1.874 ± .003
[47.60 ± .076]
Kxxxx
M5
CLAMP
SIZE
2
4
M1
mm
in
5.965 151.5
8.307 211.0
LETTER DIMENSION
M3
M4
in
mm
in
mm
.197
5.0
1.910 48.5
.236
6.0
2.362 60.0
M5
in
1.910
2.165
mm
48.5
55.0
NOTES:
SJ
T
CLAMP
SIZE
2
4
KIT
NUMBER
65002-03
65002-04
LIST
PRICE
$46.35
$45.00
PS(R)xxx
V
Kit includes:
Rear Mounting Bracket
3 Screws
KITS
31
(800) 624-8511
AC06
B
G
H
J
M
M04
ua
ir
e
RIGID REAR MOUNTING BRACKET
This option provides an aluminum rear mounting bracket for a
1.0 in [25.0 mm] diameter tube internally or a 1.874 in [47.6 mm]
diameter externally.
AVAILABLE ON DESIGN NO.
GRM2 or GRM4
2 [6]
PRICE ADDER
$48.16
SHADED CODES
S
SB
.197 [5.0] HEX
Pxxxx
4.250
[108.0]
3X M3 HEX
Ø 1.012
[25.7]
Dxxxx
M1
.886
[22.5]
M4
pn
e
Ø 1.874 ± .003
[47.60 ± .076]
Kxxxx
M5
CLAMP
SIZE
2
4
PS(R)xxx
M1
mm
in
5.965 151.5
8.307 211.0
LETTER DIMENSION
M3
M4
in
mm
in
mm
.197
5.0
1.910 48.5
.236
6.0
2.362 60.0
M5
in
1.910
2.165
mm
48.5
55.0
SJ
T
V
KITS
CLAMP
SIZE
2
4
KIT NUMBER
65029-03
65029-04
LIST
PRICE
$48.16
$48.16
Kit includes:
Rear Mounting Bracket
3 Screws
2 Set Screws
32
(800) 624-8511
AC06
NOTES:
B
ua
ir
e
M07
32 mm SPHERICAL MOUNTING BRACKET
This option provides a spherical side mounting bracket for a
32 mm tube.
GRM2 or GRM4
2 [6]
G
PRICE ADDER
$69.85
H
SHADED CODES
J
M
PATENT #5,941,513
S
M5
Ø M3 THRU
M7
Ø M4 TUBE
SB
30°
30°
Pxxxx
M6
M8
Dxxxx
M10 RAD
pn
e
M9
M11 RAD
CLAMP
SIZE
2
4
M1
in
mm
5.138 130.5
6.969 177.0
CLAMP CAN BE ROTATED
360° WITHIN BRACKET
M3
in
1.265
1.265
M4
mm
32.1
32.1
in
1.260
1.260
M5
mm
32.0
32.0
in
2.618
2.618
mm
66.5
66.5
Kxxxx
.197 [5.0] HEX
M1
NOTES:
LETTER DIMENSION
M6
M7
in
in
mm
mm
6.064 154.0 .625 15.9
6.299 160.0 .750 19.1
M8
in
mm
3.130 79.5
3.130 79.5
M9
in
mm
1.476 37.5
1.711 43.5
M10
in
mm
3.130 79.5
3.130 79.5
SJ
M11
in
mm
1.565 39.8
1.786 45.4
T
CLAMP
SIZE
2
4
KIT
NUMBER
62223-04
62223-05
LIST
PRICE
$69.85
$69.85
V
Kit includes:
2 Bracket Halves
1 Spherical Ball
3 Screws
KITS
33
(800) 624-8511
AC06
PS(R)xxx
SWITCH OPTIONS: CLAMP ACCESSORIES
ua
ir
e
B
- Sxx
G
H
S01 S03 S04 S05 S06 S07 S08 -
J
M
S
SB
Pxxxx
pn
e
Dxxxx
SWITCH OPTIONS (specific switch)
Turck Bi5-Q08-AP6X2-0.25M-RS4T/S34
8 mm threaded barrel proximity, PNP (sourcing)
8 mm threaded barrel proximity, NPN (sinking)
8 mm threaded barrel proximity, AC
12 mm threaded barrel proximity, PNP (sourcing)
12 mm threaded barrel proximity, NPN (sinking)
12 mm threaded barrel proximity, AC
Kxxxx
PS(R)xxx
SJ
T
V
KITS
34
(800) 624-8511
AC06
SWITCH INSTALLED- TURCK
Bi5-Q08-AP6X2-0.25M-RS4T/S34
B
ua
ir
e
S01
This option mounts the Turck Q08 switch
(Bi5-Q08-AP6X2-0.25M-RS4T/S34) into the special switch
mounting tips Tx025, 026, 027, 045, 046, 047, or 055.
G
AVAILABLE ON
DESIGN NO.
PRICE ADDER
GRM2
2 [6]
$128.00
Price adder is for switch only.
Price of the special switch mounting tips can be found in Section T.
H
J
GRM2TS-2-45 blank -45 blank -LAA -S01 -Tx025 through Tx027 -Tx022 through Tx024
M
S
EURO 4 PIN
CONNECTOR
.25 m
1 = BN
SB
4 = BK
Pxxxx
3 = BU
Dxxxx
WIRING DIAGRAM
pn
e
2m
BN
Kxxxx
BU
BK
MATING CORDSET
LOAD
PS(R)xxx
OUTPUT: AP6X2
SHORT CIRCUIT AND OVERLOAD PROTECTED AND WFI
SJ
T
CLAMP
SIZE
2
2
KIT
NUMBER
65136-03
LIST
PRICE
$128.00
TURCK SWITCH NO.
Bi5-Q08-AP6X2-0.25M-RS4T/S34
MATCHING CORDSET 2 METERS LONG
RK 4T-2
65413-00-02
$19.55
Kit includes:
1 Turck Q08 Switch
2 Screws to mount switch
2 Cable Clamps
2 Screws to mount clamps
1 Wire Tie
V
KITS
35
(800) 624-8511
AC06
G
H
J
M
S
SWITCH INSTALLED - THREADED BARREL
PROXIMITY SWITCH WITH QUICK CONNECT
ua
ir
e
B
S03 to S08
This option mounts either an 8 mm or 12 mm AC or DC
proximity switch onto any switch mounting options.
AVAILABLE ON
DESIGN NO.
GRM2
or GRM4
2 [6]
Price adder is switch only.
ACCESSORY
S03 & S04
S05
S06 & S07
S08
PRICE ADDER
$62.75
$78.95
$62.75
$78.95
3-Wire DC
NPN Normally Open
GRM2TS-2-45DCB-45DDB-LAA -S03 -SB15
1 BROWN
4 BLACK
3 BLUE
3-Wire DC
PNP Normally Open
DC PROXIMITY SWITCH
11.000
[.28 m]
BARREL
LENGTH
Pxxxx
1 BROWN
Pin 4
Black
Pin 3
Blue
4 BLACK
3 BLUE
Pin 1
Brown
M12 x 1.0 THREAD
AC PROXIMITY SWITCH
11.000
[.28 m]
LED - YELLOW
SIGNAL
LED - RED
POWER (12 mm
PROX ONLY)
Pin 2
Red/Black
1/2-20 THREAD
(-)
2-Wire AC
AC Normally Open
Pin 1
Green
pn
e
BARREL
LENGTH
PS(R)xxx
T
(+)
LOAD
LED - YELLOW
SIGNAL
Dxxxx
SJ
(-)
SB
Kxxxx
(+)
LOAD
2 RED/BLACK
3 RED/WHITE
Pin 3
Red/White
N
LOAD
L1
1 GREEN
SWITCH
OPTION
S03
S04
S05
S06
S07
S08
THREAD
SIZE
M8 x 1.0
M8 x 1.0
M8 x 1.0
M12 x 1.0
M12 x 1.0
M12 x 1.0
SWITCH
TYPE
24 VDC - PNP
24 VDC - NPN
AC
24 VDC - PNP
24 VDC - NPN
AC
BARREL
LENGTH
1.575 [40 mm]
1.969 [50 mm]
1.575 [40 mm]
1.575 [40 mm]
1.575 [40 mm]
2.362 [60 mm]
PHD SWITCH
NUMBER
65439-001
65439-002
65439-003
65439-004
65439-005
65439-006
PHD LIST
PRICE
$62.75
$62.75
$78.95
$62.75
$62.75
$78.95
PEPPERL+FUCHS
PART NUMBER
NBB2-8GM40-E2-Y906140
NBB1.5-8GM50-E0-Y906141
NJ1.5-8GM40-WS-Y906241
NBB2-12GM40-E2-Y906251
NBB2-12GM40-E0-Y906261
NBB2-12GM60-WS-Y906271
Switches include 2 lock nuts
V
KITS
MATCHING CORDSETS 2 METERS LONG
SWITCH
TYPE
DC
AC
PHD PART
NUMBER
65440-001-02
65440-002-02
PHD LIST
PRICE
$13.15
$13.15
PEPPERL+FUCHS
PART NUMBER
V1-G-YE2M-PVC
V12-G-YE2M-PVC
MATING CORDSET
36
(800) 624-8511
78.74
[2 m]
AC06
DC - M12 x 1.0 INTERNAL THREAD
AC - 1/2-20 INTERNAL THREAD
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
37
(800) 624-8511
AC06
SWITCH MOUNTING OPTIONS: CLAMP ACCESSORIES
ua
ir
e
B
- SBxx
G
H
SWITCH MOUNTING OPTIONS - BODY
SWITCH COVER SWITCH
POSITION
EXIT
SB05 - 5 mm threaded switch cover
1
2 or 4
SB06 - 5 mm threaded switch cover
3
2 or 4
SB07 - 12 mm switch option
3
2
3
4
3
2
3
4
3
2
3
4
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
38
(800) 624-8511
AC06
5 mm THREADED SWITCH
COVER - POSITION 1
B
SB06
5 mm THREADED SWITCH
COVER - POSITION 3
G
ua
ir
e
SB05
These options provide jaw open and closed sensing by fixing
an aluminum housing to the side of the clamp body, mounting
commercially available 5 mm metal sensing switches that sense the
drive pin as the clamp opens and closes. The switch location is not
adjustable.
For use with customer supplied Turck 5 mm proximity switch
Bi1-EG05-AP6X-V1331 or equivalent.
AVAILABLE ON
DESIGN NO.
GRM2
2 [6]
Price adder is for switch cover only.
H
SB05 SHOWN
J
PRICE ADDER
$69.80
M
S
GRM2TS-2- 75 DCB-75DDB-LAA -SB05
SHADED CODES
SB
1.030 1.233
[26.2] [31.3]
Options SB05 and SB06 are not available with flange units.
2X M5 x 0.5
THD THRU
Pxxxx
2.570
[65.3]
.889
[22.6]
pn
e
2
.920
[23.4]
3
Dxxxx
.606
[15.4]
.406
[10.3]
Kxxxx
1.840
[46.7]
1
PS(R)xxx
4
NOTES:
T
V
CLAMP
SIZE
2
KIT
NUMBER
65401-03
LIST
PRICE
$69.80
Kit includes:
Housing and all pins and screws
required for installation.
Switches are not included.
KITS
39
(800) 624-8511
AC06
SJ
SB07
SB11
SB13
12, 8, or 5 mm SWITCH COVER
SWITCH EXIT - POSITION 2
G
SB08
SB12
SB14
12, 8, or 5 mm SWITCH COVER
SWITCH EXIT - POSITION 4
H
J
M
S
These options provide jaw open and closed sensing or panel
present by fixing an aluminum housing to the side of the clamp
body, which accommodates 5, 8, or 12 mm switches. The switches
sense the position of a target on the drive pin as the clamp opens
and closes. The switch locations are adjustable. The switch cover is
not available on the port side of the clamp.
For use with the following customer supplied Turck proximity
switches or equivalent: (shielded switches only)
5 mm = Bi1-EG05-AP6X-V1331
8 mm = Bi1.5U-EG08-AP6X-H1341
12 mm = Bi3U-EM12-AP6X-H1141
SB07 SHOWN
AVAILABLE ON
PRICE ADDER
DESIGN NO.
GRM2
$121.88
2 [6]
Price adder is for one switch cover mounted to the clamp.
SB
ua
ir
e
B
GRM2TS-2-45DCB-45DDB-LAA -SB07
SHADED CODES
NOTES:
4)* = M6 x 1.0-6H THREAD THRU TO JAW SLOT REQUIRED IF ORDERING AS A KIT.
Pxxxx For compatibility with other units, consult PHD.
.196 MIN
[5.0]
1.575
[40.0]
1.596 MAX
[40.5]
Dxxxx
1.162
[29.5]
SWITCH
2
pn
e
*-SB08, 12, 14 OPTIONS
(SEE NOTE 4)
Kxxxx
*.500
[12.7]
KNURLED NUT
1.295
[32.9]
.975
[24.8]
1.950
[49.5]
1
PS(R)xxx
3
*.500
[12.7]
.020
[0.5]
SJ
T
*1.857
[47.2]
1.043 MIN THD LENGTH
[26.5]
.748
[19.0]
4
*-SB07, 11, 13 OPTIONS
(SEE NOTE 4)
*MODIFICATION TO BODY REQUIRED IF ORDERING AS A KIT (SEE NOTE 4)
CLAMP
SIZE
2
2
2
2xF or 2xK
2xF or 2xK
2xF or 2xK
V
KITS
OPTION
SB07 or SB08
SB11 or SB12
SB13 or SB14
SB07 or SB08
SB11 or SB12
SB13 or SB14
SWITCH
THREAD SIZE
12 mm
8 mm
5 mm
12 mm
8 mm
5 mm
KIT
NUMBER
65411-06
65411-05
65411-03
65411-10
65411-09
65411-07
40
(800) 624-8511
AC06
LIST
PRICE
$121.88
$121.88
$121.88
$121.88
$121.88
$121.88
Kit includes:
Housing and all pins and screws required
for installation. Switches are not included.
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
41
(800) 624-8511
AC06
ua
ir
e
B
- Pxxxx
G
H
PxNxx - Panel Present Detection without switch
PxAxx - Panel Present Detection with 4-Pin AC/DC switch
PxBxx - Panel Present Detection with 3-Pin AC/DC switch
PxDxx - Panel Present Detection with 4-Pin DC switch
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
42
(800) 624-8511
AC06
B
ua
ir
e
Pxxxx
PANEL PRESENT DETECTION
Panel present detection is a process where signaling devices detect the
presence of a part. The Series GRM Clamp accommodates this option by affixing
an adjustable housing and switch to the side of the clamp body. The internal switch
senses the position of a target on the drive pin that travels in the housing. The
location of the target relates directly to jaw position and the thickness of material
being clamped. This option is an excellent choice for panel present detection and
will function within a wide range of material thicknesses .027 to .157 in [0.7 to
4.0 mm]. Steel tips are recommended. Urethane tips are not recommended for
panel present detection. Single cone point to single diamond tips are not
recommended for panels .039 in [1.0 mm] and below. Single diamond to single
diamond tips are recommended for panels .039 in [1.0 mm] and below.
P3Nxx
P1Nxx or P3Nxx
P3Nxx
GRM2
2 [6]
P3xxx
P1xxx or P3xxx
P3xxx
BODY OPTION
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
G
ADJU
STM
ENT
PANE
DIRE
L PR
CTIO
ESEN
N
T
ER
LEV ION
IT
POS
H
P3xxx SHOWN
J
HOUSING
JAW OPTION
POSITION
C, D, G, H, J, N, P, S, F, K
3
C, D, G, H, J, N, P, S
1 or 3
F, K
3
C, D, G, H, J, N, P, S, F, K
3
C, D, G, H, J, N, P, S
1 or 3
F, K
3
PRICE
ADDER
$100.50
$100.50
$100.50
$125.00
$125.00
$125.00
M
S
Price adder is for one switch cover with or without switch mounted to the clamp.
GRM2TS-2-45DCB-45DDB-LAA -P 3 A 10
SHADED CODES
are required
for this option. All unshaded model codes
are example only.
HOUSING OPTION
P - Panel Present
SWITCH HOUSING
POSITION
1 - Position 1
3 - Position 3
pn
e
Switch Option-Refer to next page for
specifications.
Panel Thickness Option-Housing may
be preset at the factory for panel thickness
in .004 in [0.1 mm] increments.
Material Thickness Range .027 to .157 in [0.7 to 4.0 mm]
PANEL THICKNESS OPTION
00 - No Panel
07 - .027 in [0.7 mm]
10 - .039 in [1.0 mm]
40 - .157 in [4.0 mm]
P1x00 and P3x00 options do not require
factory setup. For compatibility with other
units, consult PHD.
SWITCH OPTION
N - No Switch
A - 4-Pin AC/DC Switch
B - 3-Pin AC/DC Switch
D - 4-Pin DC Switch
Pxxxx
Dxxxx
NOTES:
1) ALL DIMENSIONS ARE REFERENCE UNLESS
SPECIFICALLY TOLERANCED
2) ALL METRIC DIMENSIONS [ ] ARE GIVEN
IN MILLIMETERS 1 mm = .03937 in
3) NUMBERS IN CIRCLES INDICATE POSITION
(POSITION 1 IS PORT SIDE OF CLAMP)
1.401
[35.6]
2.836
[72.0]
1.512 [38.4] MIN
1.782 [45.3] MAX
JAW A
SB
Kxxxx
2
SWITCH CABLE EXIT
LOCATION
(P3xxx SHOWN)
PS(R)xxx
1.175
[29.8]
2.350
[59.7]
PANEL PRESENT
LEVER
POSITION
SJ
1
3
.220 [5.6]
T
JAW B
CLAMP
SIZE
2
ACCESSORY
PxN00
PxA00
PxB00
PxD00
PxN00
2xF or 2xK
PxA00
PxB00
PxD00
KIT
NUMBER
71964-03
71964-04
71964-15
71964-05
71964-06
71964-07
71964-16
71964-08
DESCRIPTION
Housing w/o switch kit
Housing w/4-pin AC/DC switch kit
Housing w/4-pin DC switch kit
LIST
PRICE
$90.50
$135.00
$135.00
$135.00
$90.50
$135.00
$135.00
$135.00
4
Kit includes:
for installation.
V
KITS
43
(800) 624-8511
AC06
SET-UP PROCEDURE:
B FIELD
1) Using air pressure, close clamp jaws with panel between tips.
H
Tighten both screws to 85 lb-in [9.6 N-m]. Switch is now set.
ua
ir
e
G
7)
2)
Loosen both screws and remove lever from locating hole.
TO TEST THE SETUP:
3)
Slide housing in direction of arrow (toward cylinder) until
switch just turns on.
1)
Using air pressure, close clamp jaws with panel between tips.
The switch should stay on.
4)
Snug flat washer screw. Housing should still slide back and
forth.
2)
Close clamp jaws with no panel between tips. The switch
should turn off.
5)
Rotate lever into hole that matches present housing location
and snug screw.
NOTE: With no panel present, the switch will flicker on as the target
passes under the switch and turn off as the jaws reach full closed.
6)
Wiggle housing forward and backward. If switch flickers off and
on, rotate the lever into the next hole with a lower number (i.e.,
from 5 to 4). Wiggle housing again. Switch should stay on. If
not, continue to lower numbered hole until switch does not
flicker.
For panels .027 in [0.7 mm] and below, it may be necessary to set
the switch in the first hole that flickers (see note 6). Do not rotate
lever into the next hole with a lower number. Instead, leave the lever
in the same hole and slide the housing in the direction of the
cylinder so the switch stays on and tighten both screws.
J
M SWITCH OPTION A
BU
7.874
[0.2 m]
S
1.535
[39.0]
LOAD
2
3
1
4
Pxxxx
L2
L1
±
±
WARNING: NO SHORT-CIRCUIT
PROTECTION. ALWAYS WIRE A LOAD
IN SERIES WITH THE SENSOR
1/2-20 UNF
MICROFAST CONNECTOR
SB
BN
Bi 2-Q10S-AZ31X-0.2M-SB 4T/S1597
SWITCH OPTION B
7.874
[0.2 m]
Dxxxx
1.535
[39.0]
RD/WH
3
LOAD
RD/BK
L1
2
1
L2
pn
e
1/2-20 UNF
MICROFAST CONNECTOR
Kxxxx
PS(R)xxx
GN
Bi 2-Q10S-AZ31X-0.2M-SB 3T
SWITCH OPTION D
BN
SJ
1
2
M12 X 1
EUROFAST CONNECTOR
T
+
1.575
[40.0]
7.874
[0.2 m]
BK
4
LOAD
BU
3
SHORT CIRCUIT AND OVERLOAD
PROTECTION
Bi 2-Q10S-AP6X-0.2M-RS 4T
V
SWITCH
OPTION
A
B
D
KITS
SWITCH
TYPE
4-PIN AC/DC - N.O.
3-PIN AC/DC - N.O.
4-PIN DC - N.O. - PNP
PHD SWITCH
NUMBER
72121-001
72121-003
72121-002
44
(800) 624-8511
AC06
-
PHD LIST
PRICE
$60.00
$60.00
$60.00
TURCK PART NUMBER
Bi 2-Q10S-AZ31X-0.2M-SB 4T/S1597
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
45
(800) 624-8511
AC06
ua
ir
e
B
- Dxxxx
G
H
DxNxx - Double Sheet Detection without switch
DxAxx - Double Sheet Detection with 4-Pin AC/DC switch
DxBxx - Double Sheet Detection with 3-Pin AC/DC switch
DxDxx - Double Sheet Detection with 4-Pin DC switch
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
46
(800) 624-8511
AC06
B
ua
ir
e
Dxxxx
DOUBLE SHEET DETECTION
Double sheet detection is a process where signaling devices detect the presence of
multiple parts. The Series GRM Clamp accommodates this option by affixing an adjustable
housing and switch to the side of the clamp body. The internal switch senses the position of
a target on the drive pin that travels in the housing. The location of the target relates directly
to jaw position and the thickness of material being clamped. This option is an excellent
choice for backup or redundant signaling detection and will function within a wide range of
material thicknesses .027 to .157 in [0.7 to 4.0 mm]. Steel tips are recommended.
Urethane tips are not recommended for double sheet detection. Single cone point to
single diamond tips are not recommended for panels .039 in [1.0 mm] and below.
Single diamond to single diamond tips are recommended for panels .039 in [1.0 mm]
and below.
D3Nxx
D1Nxx or D3Nxx
D3Nxx
GRM2
2 [6]
D3xxx
D1xxx or D3xxx
D3xxx
BODY OPTION
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
G
ADJU
STM
ENT
DOUB
DIRE
LE SH
CTIO
EET
N
ER
LEV ION
IT
POS
H
D3xxx SHOWN
HOUSING
JAW OPTION
POSITION
C, D, G, H, J, N, P, S, F, K
3
C, D, G, H, J, N, P, S
1 or 3
F, K
3
C, D, G, H, J, N, P, S, F, K
3
C, D, G, H, J, N, P, S
1 or 3
F, K
3
J
PRICE
ADDER
$100.50
$100.50
$100.50
$125.00
$125.00
$125.00
M
S
Price adder is for one switch cover with or without switch mounted to the clamp.
GRM2TS-2-45DCB-45DDB-LAA -D 3 A 10
SHADED CODES
are required
are example only
HOUSING OPTION
D - Double Sheet
SWITCH HOUSING
POSITION
1 - Position 1
3 - Position 3
SB
SWITCH OPTION
N - No Switch
D - 4-Pin DC Switch
Pxxxx
Dxxxx
pn
e
Switch Option-Refer to next page for
specifications.
Panel Thickness Option-Housing may
be preset at the factory for panel thickness
in .004 in [0.1 mm] increments.
Material Thickness Range .027 to .157 in [0.7 to 4.0 mm]
00 - No Panel
07 - .027 in [0.7 mm]
10 - .039 in [1.0 mm]
40 - .157 in [4.0 mm]
1.401
[35.6]
D1x00 and D3x00 options do not require
factory setup. For compatibility with other
units, consult PHD.
JAW A
2.836
[72.0]
1.512 [38.4] MIN
1.782 [45.3] MAX
NOTES:
1) ALL DIMENSIONS ARE REFERENCE UNLESS
SPECIFICALLY TOLERANCED
2) ALL METRIC DIMENSIONS [ ] ARE GIVEN IN
MILLIMETERS 1 mm = .03937 in
3) NUMBERS IN CIRCLES INDICATE POSITION
(POSITION 1 IS PORT SIDE OF CLAMP)
Kxxxx
2
SWITCH CABLE EXIT
LOCATION
(D3xxx SHOWN)
PS(R)xxx
1.175
[29.8]
2.350
[59.7]
DOUBLE SHEET
LEVER
POSITION
SJ
1
3
.220 [5.6]
JAW B
CLAMP
SIZE
2
ACCESSORY
DxN00
DxA00
DxB00
DxD00
DxN00
2xF or 2xK
DxA00
DxB00
DxD00
KIT
NUMBER
71964-09
71964-10
71964-17
71964-11
71964-12
71964-13
71964-18
71964-14
DESCRIPTION
LIST
PRICE
$90.50
$135.00
$135.00
$135.00
$90.50
$135.00
$135.00
$135.00
4
T
TARGET - SOLD WITH KIT
V
Kit includes:
for installation.
ASSEMBLY NOTE: Notch in
target to face switch.
KITS
47
(800) 624-8511
AC06
G
H
If not, continue to higher numbered hole until switch does not
flicker.
2)
Loosen both screws and remove lever from locating hole.
3)
Slide housing in direction of arrow (toward jaws) until switch
just turns on.
7)
4)
Snug flat washer screw. The housing should still slide back and
forth.
TO TEST THE SETUP:
1)
5)
Rotate lever into hole that matches present housing location
and snug screw.
Using pressure, close clamp jaws with one panel between tips.
The switch should stay on.
2)
6)
Wiggle housing forward and backward. If switch flickers off and
on, rotate the lever into the next hole with a higher number (i.e.,
from 2 to 3). Wiggle housing again. Switch should stay on.
Close clamp jaws with two panels between tips. The switch
should turn off.
NOTE: With no panel present, the switch will turn on and remain on
as the target passes under the switch.
J
M
ua
ir
e
SET-UP PROCEDURE:
B FIELD
1) Using pressure, close clamp jaws with one panel between tips.
Tighten both screws to 85 lb-in [9.6 N-m]. Switch is now set.
SWITCH OPTION A
BU
7.874
[0.2 m]
1.535
[39.0]
LOAD
2
S
3
1
4
Pxxxx
L2
L1
±
±
1/2-20 UNF
MICROFAST CONNECTOR
SB
BN
Bi 2-Q10S-AZ31X-0.2M-SB 4T/S1597
SWITCH OPTION B
7.874
[0.2 m]
1.535
[39.0]
RD/WH
3
LOAD
Dxxxx
RD/BK
L1
2
1
L2
pn
e
1/2-20 UNF
MICROFAST CONNECTOR
Kxxxx
PS(R)xxx
GN
SWITCH OPTION D
BN
SJ
1
2
M12 X 1
EUROFAST CONNECTOR
T
+
1.575
[40.0]
7.874
[0.2 m]
BK
4
LOAD
BU
3
PROTECTION
V
SWITCH
OPTION
A
B
D
KITS
SWITCH
TYPE
4-PIN AC/DC - N.O.
3-PIN AC/DC - N.O.
PHD SWITCH
NUMBER
72121-001
72121-003
72121-002
48
(800) 624-8511
AC06
-
PHD LIST
PRICE
$60.00
$60.00
$60.00
TURCK PART NUMBER
Bi 2-Q10S-AZ31X-0.2M-SB 4T/S1597
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
49
(800) 624-8511
AC06
ua
ir
e
B
- Kxxxx
G
H
KxNxx - Panel Present and Double Sheet Detection without switch
KxAxx - Panel Present and Double Sheet Detection with 4-Pin AC/DC switch
KxBxx - Panel Present and Double Sheet Detection with 3-Pin AC/DC switch
KxDxx - Panel Present and Double Sheet Detection with 4-Pin DC switch
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
50
(800) 624-8511
AC06
PANEL PRESENT AND
DOUBLE SHEET DETECTION
B
ua
ir
e
Kxxxx
This option provides panel present and double sheet detection
on one Series GRM clamp. This is accomplished by affixing two
adjustable housings and switches to the sides of the clamp body. The
internal switches sense the position of the targets on the drive pin
that travels in the housings. The location of the targets relates directly
to jaw position and the thickness of the material being clamped. This
option is an excellent choice for panel present detection and backup
or redundant signaling detection. This option will also function within
a wide range of material thicknesses .027 to .157 in [0.7 to 4.0 mm].
Steel tips are recommended. Urethane tips are not recommended
for panel present and double sheet detection. Single cone point
to single diamond tips are not recommended for panels .039 in
[1.0 mm] and below. Single diamond to single diamond tips are
recommended for panels .039 in [1.0 mm] and below.
AVAILABLE ON
DESIGN NO.
GRM2
2 [6]
ACCESSORY
K1Nxx or K3Nxx
K1xxx or K3xxx
G
H
-B06-K3xxx SHOWN
J
Specific body options are required for this option. See the
chart below for available bodies.
BODY OPTION
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
JAW OPTION
C, D, G, H, J, N, P, S
C, D, G, H, J, N, P, S
HOUSING
POSITION
1 and 3
1 and 3
M
PRICE
ADDER
$219.70
$268.70
S
Price adder is for two switch covers with or without switches mounted to the clamp.
GRM2TS-2-45DCB-45DDB-LAA-B06 -K 3 A 10
SHADED CODES
are required
are example only.
00 - No Panel
07 - .027 in [0.7 mm]
10 - .039 in [1.0 mm]
40 - .157 in [4.0 mm]
PANEL PRESENT
SWITCH HOUSING
POSITION
1 - Position 1
3 - Position 3
HOUSING OPTION
K - Panel Present and
Double Sheet
pn
e
2.922
[74.2]
1.461
[37.1]
2.836
[72.0]
1.512 [38.4] MIN
SB
SWITCH OPTION
N - No Switch
D - 4-Pin DC Switch
Pxxxx
Dxxxx
Switch Option - Refer to next page for specifications.
Panel Thickness Option - Housings may be preset at the factory
for panel thickness in .004 in [0.1 mm] increments.
Material Thickness Range - .027 to .157 in [0.7 to 4.0 mm]
Kxxxx
K1x00 and K3x00 options do not require factory setup. For
compatibility with other units, consult PHD.
PS(R)xxx
1.782 [45.3] MAX
SWITCH CABLE EXIT
LOCATION
JAW A
JAW A
DOUBLE SHEET
LIST
PRICE
$199.70
$288.70
$288.70
$288.70
1.175
[29.8]
2.350
[59.7]
.220
[5.6]
KIT
DESCRIPTION
ACCESSORY NUMBER
71964-19 Housings w/o switch kit
KxN00
71964-20 Housings w/4-pin AC/DC switch kit
KxA00
2
71964-22 Housings w/3-pin AC/DC switch kit
KxB00
71964-21 Housings w/4-pin DC switch kit
KxD00
Kit includes: Housings and all pins and screws required for installation.
CLAMP
SIZE
7
LEVER
POSITION
1.322
[33.6]
6
JAW B
7
LEVER
POSITION
SJ
4
5
5
4
2
3
2
6
1
1
PANEL PRESENT
1.175
[29.8]
3
2.350
[59.7]
T
JAW B
SWITCH CABLE EXIT
LOCATION
1.322
[33.6]
NOTES:
1) ALL DIMENSIONS ARE REFERENCE UNLESS SPECIFICALLY
TOLERANCED
2) ALL METRIC DIMENSIONS [ ] ARE GIVEN IN MILLIMETERS
1 mm = .03937 in
V
KITS
51
(800) 624-8511
AC06
PANEL PRESENT DETECTION FIELD
DOUBLE SHEET DETECTION FIELD SET-UP
PROCEDURE
2) Loosen both screws and remove lever from locating hole.
3) Slide housing in direction of arrow (toward cylinder) until switch just
turns on.
4) Snug flat washer screw. Housing should still slide back and forth.
5) Rotate lever into hole that matches present housing location and snug
screw.
6) Wiggle housing forward and backward. If switch flickers off and on,
rotate the lever into the next hole with a lower number (i.e., from 5 to 4).
Wiggle housing again. Switch should stay on. If not, continue to lower
numbered hole until switch does not flicker.
7) Tighten both screws to 85 lb-in [9.6 N-m]. Switch is now set.
TO TEST THE SETUP:
1) Using air pressure, close clamp jaws with panel between tips. The switch
should stay on.
2) Close clamp jaws with no panel between tips. The switch should turn off.
NOTE: With no panel present, the switch will flicker on as the target passes
under the switch and turn off as the jaws reach full closed.
For panels .027 in [0.7 mm] and below, it may be necessary to set the switch
in the first hole that flickers (see note 6). Do not rotate lever into the next
hole with a lower number. Instead, leave the lever in the same hole and slide
the housing in the direction of the cylinder so the switch stays on and tighten
both screws.
1) Using pressure, close clamp jaws with one panel between tips.
2) Loosen both screws and remove lever from locating hole.
3) Slide housing in direction of arrow (toward jaws) until switch just turns
on.
4) Snug flat washer screw. The housing should still slide back and forth.
5) Rotate lever into hole that matches present housing location and snug
screw.
6) Wiggle housing forward and backward. If switch flickers off and on,
rotate the lever into the next hole with a higher number (i.e., from 2 to
3). Wiggle housing again. Switch should stay on. If not, continue to
higher numbered hole until switch does not flicker.
7) Tighten both screws to 85 lb-in [9.6 N-m]. Switch is now set.
TO TEST THE SETUP:
1) Using pressure, close clamp jaws with one panel between tips. The
switch should stay on.
2) Close clamp jaws with two panels between tips. The switch should turn
off.
NOTE: With no panel present, the switch will turn on and remain on as the
target passes under the switch.
G
H
J
M
S
ua
ir
e
B SET-UP PROCEDURE
SWITCH OPTION A
BU
7.874
[0.2 m]
SB
1.535
[39.0]
LOAD
2
3
1
BN
4
Pxxxx
L2
L1
±
±
PROTECTION. ALWAYS WIRE A
LOAD IN SERIES WITH THE SENSOR
1/2-20 UNF
MICROFAST CONNECTOR
Bi 2-Q10S-AZ31X-0.2M-SB 4T/S1597
SWITCH OPTION B
Dxxxx
7.874
[0.2 m]
1.535
[39.0]
pn
e
RD/WH
Kxxxx
3
LOAD
1
L2
1/2-20 UNF
MICROFAST CONNECTOR
GN
PS(R)xxx
SWITCH OPTION D
T
+
BN
1
2
4
3
M12 X 1
EUROFAST CONNECTOR
BK
LOAD
BU
SWITCH
OPTION
A
B
D
KITS
SWITCH
TYPE
4-PIN AC/DC - N.O.
3-PIN AC/DC - N.O.
PHD SWITCH
NUMBER
72121-001
72121-003
72121-002
PHD LIST
PRICE
$60.00
$60.00
$60.00
52
(800) 624-8511
AC06
-
PROTECTION
V
PROTECTION. ALWAYS WIRE A
LOAD IN SERIES WITH THE SENSOR
1.575
[40.0]
7.874
[0.2 m]
SJ
RD/BK
L1
2
TURCK PART NUMBER
Bi 2-Q10S-AZ31X-0.2M-SB 4T/S1597
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
53
(800) 624-8511
AC06
ua
ir
e
B
- PS(R)xxx
G
H
PS(R)xNx - Positional Sensing Detection without switch
PS(R)xAx - Positional Sensing Detection with 5-Pin AC/DC switch (Turck)
PS(R)xDx - Positional Sensing Detection with 4-Pin DC switch (P + F)
PS(R)xEx - Positional Sensing Detection with 4-Pin DC switch (Turck)
PS(R)xFx - Positional Sensing Detection with 4-Pin DC switch (Efector)
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
54
(800) 624-8511
AC06
B
ua
ir
e
PS(R)xxx
POSITIONAL SENSING DETECTION
This option provides jaw open and jaw closed sensing by
affixing an aluminum housing to the side of the clamp body. The
adjustable switches sense the position of a target on the drive pin as
the clamp opens and closes.
PS positions satellite switch S02 to sense open and S01 to
sense close. PR positions satellite switch S01 to sense open and
S02 to sense close. See tables on switch option page for satellite
switch to quick disconnect pin number relationships.
For use with the following PHD or customer supplied switches
or equivalent:
Ni 2-Q6.5-ADZ32-0.16-FSB 5.4X4/S304 (Turck)
NBN2-F581-160S6-E8-V1 (P + F)
Ni 2-Q6.5-0.16-BDS-2AP6X3-H1141/S34 (Turck)
IN 5375 (Efector)
H
PS3D9 SHOWN
J
BODY OPTION
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
STD
B05, B06, B07, B08, B08A, B09
B05, B06, B07, B08, B08A, B09
STD
STD
STD
STD
STD
pn
e
PS(R)3Nx
PS(R)xNx
PS(R)3Nx
PS(R)3A1
PS(R)xA1
PS(R)3A1
PS(R)3Dx
GRM2
2 [6]
PS(R)xDx
PS(R)3Dx
PS(R)3Ex
PS(R)xEx
PS(R)3Ex
PS(R)3Fx
PS(R)xFx
PS(R)3Fx
PS(R)3Nx
PS(R)3A1
GRM4
2 [6]
PS(R)3Dx
PS(R)3Ex
PS(R)3Fx
G
JAW OPTION
C, D, G, H, J, N, P, S, F, K
C, D, G, H, J, N, P, S
F, K
C, D, G, H, J, N, P, S, F, K
C, D, G, H, J, N, P, S
F, K
C, D, G, H, J, N, P, S, F, K
C, D, G, H, J, N, P, S
F, K
C, D, G, H, J, N, P, S, F, K
C, D, G, H, J, N, P, S
F, K
C, D, G, H, J, N, P, S, F, K
C, D, G, H, J, N, P, S
F, K
G, H, J, S, F
G, H, J, S, F
G, H, J, S, F
G, H, J, S, F
G, H, J, S, F
M
HOUSING POSITION PRICE ADDER
$85.80
3
$85.80
1 or 3
$85.80
3
$284.90
3
$284.90
1 or 3
$284.90
3
$198.00
3
$198.00
1 or 3
$198.00
3
$198.00
3
$198.00
1 or 3
$198.00
3
$198.00
3
$198.00
1 or 3
$198.00
3
$85.80
3
$284.90
3
$198.00
3
$198.00
3
$198.00
3
S
SB
Pxxxx
Dxxxx
Price adder is for one switch cover with or without switch mounted to the clamp .
Kxxxx
GRM2TS-2-45DCB-45DDB-LAA -P S 3 D 9
SHADED CODES
are required
CONNECTOR POSITION
1 - Parallel to bore
9 - Perpendicular to bore
are example only.
HOUSING OPTION
P - Positional Sensing
SENSING OPTION
S - Standard
R - Reversed
SWITCH HOUSING
POSITION
1 - Position 1
3 - Position 3
PS(R)xxx
SWITCH OPTION
N - No Switch
A - 5-pin AC/DC Switch (Turck)
D - 4-pin DC Switch (P+F)
E - 4-pin DC Switch (Turck)
F - 4-pin DC Switch (Efector)
SJ
T
V
Switch Option-Refer to next page for specifications.
Connector Position-PS(R)xA1, -PS(R)xD1, and -PS(R)xE1 options not
recommended for use with C mounts.
KITS
Connector position 1 will limit rotation about the clamp
body for the following mounts: R, S, and W.
55
(800) 624-8511
AC06
B
ua
ir
e
NOTES:
3) NUMBERS IN CIRCLES INDICATE POSITION (POSITION 1 IS PORT SIDE OF CLAMP)
G
1.537
[39.0]
H
-PS(R)xA1 =
-PS(R)xD1 =
-PS(R)xE1 =
-PS(R)xF1 =
.286
[7.3]
-PS(R)xD9 = M12 x 1 CABLE CONNECTION
-PS(R)xE9 = M12 x 1 CABLE CONNECTION
-PS(R)xF9 = M12 x 1 CABLE CONNECTION
J
90°
1.542
[39.2]
1.534
[39.0]
JAW A
M
1/2-20 UNF CABLE CONNECTION
M12 x 1 CABLE CONNECTION
.157 [4.0] HEX
OPEN SWITCH (ADJUSTABLE)
2
.157 [4.0] HEX
.197 [5.0] HEX
S
JAW B
SB
Pxxxx
.220
[5.6]
.157 [4.0] HEX
CLOSE SWITCH
(ADJUSTABLE)
LED
GREEN = POWER
RED & YELLOW = SIGNAL
pn
e
Dxxxx
1.175
[29.8]
2.350
[59.7]
3
Kxxxx
PS(R)xxx
SJ
T
V
KITS
56
(800) 624-8511
AC06
1
4
OPTION
CODE
PSxAx
PRxAx
THRU HOLE FOR M5 x 0.8 SHCS
.157 [4.0] HEX
LEDs
GREEN: POWER
YELLOW: OUTPUT STATUS (S01)
RED: OUTPUT STATUS (S02)
SO1
SATELLITE
OPEN CLOSE
S02
S01
S01
S02
1/2-20 UNF
G
4-WIRE AC/DC
L1
SENSOR S01
RD/BK
L2
LOAD 1
RD/WH
1.850
[47.0]
H
1 5
4
2
3
.906
[23.0]
L1
RD
SWITCH OPTION D
LEDs
GREEN: POWER
.157 [4.0] HEX
OPTION
CODE
PSxDx
PRxDx
LOAD 2
L2
J
SENSOR S02
SATELLITE
OPEN CLOSE
S2
S1
S1
S2
QUICK DISCONNECT
PIN NUMBER
S1 = PIN 4
S2 = PIN 2
M
3-WIRE DC (V1 TYPE)
M12 x 1
.925
[23.5]
RD/YE
GN
Ni 2-Q6.5-ADZ32-0.16-FSB 5.4X4/S304 (Turck)
.709
[18.0]
QUICK DISCONNECT
PIN NUMBER
S01 = PIN 5
S02 = PIN 4
SO2
.925
[23.5]
.709
[18.0]
B
ua
ir
e
SWITCH OPTION A
S
PNP DUAL NORMALLY OPEN
90°
1.850
[47.0]
CONNECTOR
POSITION 9
+
BN
SENSOR S1
.709
[18.0]
NBN2-F581-160S6-E8-V1 (P + F)
1
4
BK
2
3
BU
CONNECTOR
POSITION 1
LOAD 1
SB
–
WH
LOAD 2
SENSOR S2
Pxxxx
SWITCH OPTION E
.157 [4.0] HEX
.925
[23.5]
QUICK DISCONNECT
PIN NUMBER
S01 = PIN 4
S02 = PIN 2
3-WIRE DC
90°
CONNECTOR
POSITION 9
.709
[18.0]
1
4
BK
2
3
BU
SENSOR S01
LOAD 1
–
PS(R)xxx
WH
Ni 2-Q6.5-0.16-BDS-2AP6X3-H1141/S34 (Turck)
.157 [4.0] HEX
.709
[18.0]
IN 5375 (Efector)
OPTION
CODE
PSxFx
PRxFx
SATELLITE
OPEN CLOSE
S2
S1
S1
S2
CONNECTOR
POSITION 1
QUICK DISCONNECT
PIN NUMBER
S1 = PIN 4
S2 = PIN 2
90°
CONNECTOR
POSITION 9
+
BN
1
4
BK
2
3
BU
WH
V
SENSOR S1
LOAD 1
–
LOAD 2
KITS
SENSOR S2
57
(800) 624-8511
AC06
SJ
T
3-WIRE DC
M12 x 1
1.850
[47.0]
.709
[18.0]
LOAD 2
SENSOR S02
SWITCH OPTION F
.925
[23.5]
Kxxxx
+
BN
CONNECTOR
POSITION 1
LEDs
GREEN: POWER
Dxxxx
1.850
[47.0]
.713
[18.1]
SATELLITE
OPEN CLOSE
S02
S01
S01
S02
M12 x 1
pn
e
LEDs
GREEN: POWER
OPTION
CODE
PSxEx
PRxEx
G
H
J
M
S
KIT
ACCESSORY NUMBER
PS(R)xNx 72914-03
PS(R)xA1 72914-07
PS(R)xDx 72914-04
2
PS(R)xEx 72914-09
PS(R)xFx 72914-22
PS(R)xNx 72914-05
PS(R)xA1 72914-08
2xF or 2xK PS(R)xDx 72914-06
PS(R)xEx 72914-10
PS(R)xFx 72914-23
PS(R)xNx 72914-14
PS(R)xA1 72914-18
4
PS(R)xDx 72914-15
PS(R)xEx 72914-20
PS(R)xFx 72914-24
4xF
PS(R)xNx 72914-16
PS(R)xA1 72914-19
PS(R)xDx 72914-17
PS(R)xEx 72914-21
PS(R)xFx 72914-25
CLAMP
SIZE
SB
Pxxxx
Dxxxx
ua
ir
e
B
DESCRIPTION
Housing w/5-pin AC/DC (Turck) switch kit
Housing w/4-pin DC (P+F) switch kit
Housing w/4-pin DC (Turck) switch kit
Housing w/4-pin DC (Efector) switch kit
Kit includes:
LIST
PRICE
for installation.
$102.50
$301.60
$214.50
$214.50
$214.50
$102.50
$301.60
$214.50
$214.50
$214.50
$102.50
$301.60
$214.50
$214.50
$214.50
$102.50
$301.60
$214.50
$214.50
$214.50
REPLACEMENT SWITCH KIT NUMBERS AND PRICES IF ORDERED SEPARATELY
SWITCH
OPTION
A
D
E
F
SWITCH
TYPE
5-PIN AC/DC-N.O.
4-PIN DC-N.O. - PNP
4-PIN DC-N.O. - PNP
PHD SWITCH
KIT NUMBER
72914-11
72914-12
72914-13
72914-26
PHD LIST
PRICE
$199.10
$115.00
$115.00
$115.00
SWITCH PART NUMBER
Ni 2-Q6.5-ADZ32-0.16-FSB 5.4X4/S304
NBN2-F581-160S6-E8-V1
Ni 2-Q6.5-0.16-BDS-2AP6X3-H1141/S34
IN 5375
MATCHING CORDSETS 2 METERS LONG
PHD PART
NUMBER
73317-00-02
65440-001-02
65413-00-02
65440-001-02
PHD LIST
PRICE
$31.50
$13.15
$19.55
$13.15
Kxxxx
PS(R)xxx
78.74
[2 m]
CORDSET
PART NUMBER
KB 5T-2
V1-G-YE2M-PVC
RK 4T-2
V1-G-YE2M-PVC
pn
e
SWITCH
OPTION
A
D
E
F
DC - M12 x 1.0 INTERNAL THREAD
AC - 1/2-20 INTERNAL THREAD
MATING CORDSET
SJ FIELD SET-UP PROCEDURE:
1)
2)
T
3)
4)
V
5)
KITS
6)
7)
8)
Using air pressure, close clamp jaws with panel between tips.
Loosen but do not remove screw adjacent to letter “C” (close)
on switch cover.
Slide screw in direction opposite to arrow (toward cylinder)
until switch turns off.
Slide screw in direction of arrow (toward jaws) until switch
turns on.
Align washer under head of screw to cover slot on switch cover
before tightening.
Tighten screw to 44 in-lb [5.0 Nm]. Close switch is now set.
Using air pressure, open clamp jaws.
Loosen but do not remove screw adjacent to letter “O” (open)
on switch cover.
58
(800) 624-8511
AC06
9)
Slide screw in direction opposite to arrow (toward jaws) until
switch turns off.
10) Slide screw in direction of arrow (toward cylinder) until switch
turns on.
11) Align washer under head of screw to cover slot on switch cover
before tightening.
12) Tighten screw to 44 in-lb [5.0 Nm]. Open switch is now set.
TO TEST THE SETUP:
The switch should turn on.
14) Using air pressure, open clamp jaws. The switch should turn on.
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
59
(800) 624-8511
AC06
ua
ir
e
B
- SJBxx
- SJAxx
G
H
SWITCH MOUNTING OPTIONS - JAW A
J
SJA10 SJA11 SJA12 SJA13 SJA14 SJA15 SJA16 SJA17 SJA20 SJA21 -
M
S
SB
Pxxxx
SWITCH MOUNTING OPTIONS - JAW B
POSITION:
1
3
1
3
1
3
1
3
6
6
SJB10 SJB11 SJB12 SJB13 SJB14 SJB15 SJB16 SJB17 SJB20 SJB21 -
pn
e
Dxxxx
BRACKET FOR
THREADED SWITCH:
6 mm
6 mm
8 mm
8 mm
12 mm
12 mm
5/16-24
5/16-24
12 mm
12 mm
Kxxxx
PS(R)xxx
SJ
T
V
KITS
60
(800) 624-8511
AC06
BRACKET FOR
THREADED SWITCH:
6 mm
6 mm
8 mm
8 mm
12 mm
12 mm
5/16-24
5/16-24
12 mm
12 mm
POSITION:
1
3
1
3
1
3
1
3
6
6
SIDE PROXIMITY SWITCH MOUNTING
B
ua
ir
e
SJx10 to SJx17
This option provides panel sensing with a tip that includes a
threaded mounting surface for 5/16, 6, 8, and 12 mm barrel type
proximity switches. The threaded surface is an integral part of the
tip providing a robust solution that cleanly attaches to standard and
flange jaws. These tips are not a set, they must be used with the
following standard tips: single diamonds, double diamonds, or
double cones. The standard tips must be called out in the model
number and specified (black, silver, or gold) for the material
thickness and jaw style.
The code SJAxxx defines the size of threaded hole for customer
supplied proximity switch. The jaw A or B and the side 1 or 3 that
the proximity will mount on.
AVAILABLE ON
DESIGN NO.
GRM2
2 [6]
GRM4
2 [6]
G
H
J
ACCESSORY
SJA or SJB 10, 11, 12, 13, 14, 15, 16, & 17
SJA or SJB 10, 11, 12, 13, 14, 15, 16, & 17
TIP STYLE
PRICE ADDER
SDx
$8.85
DDx/DCx
$12.85
SDx
$12.05
DDx/DCx
$12.85
M
S
Standard tips are specified on jaw A and jaw B. The switch size and position must be specified.
The price adder is in addition to the cost of the standard tip.
SB
GRM2TS-2-45 DCB -45 DDB -LAA -SJB14
Pxxxx
SHADED CODES
pn
e
Dxxxx
2
T1
(FROM TIP
DIMENSIONAL PAGE)
.750
[19.0]
THREAD SIZE
SEE OPTION CHART
JAW PIVOT
Kxxxx
PS(R)xxx
.591
[15.0]
1.043
[26.5]
SJ
J7
(FROM DIMENSIONAL PAGE)
JAW A
T
1
3
.250
[6.4]
V
JAW B
4
KITS
61
(800) 624-8511
AC06
G
H
J
M
S
ua
ir
e
B
ACCESSORY CODE
PROXIMITY CLAMP
JAW
THREAD
SIZE
A OR B
6 mm
SJA or SJB10
2
SJA or SJB11
SJA or SJB10
4
SJA or SJB11
SJA or SJB12
8 mm
2
SJA or SJB13
SJA or SJB12
4
SJA or SJB13
SJA or SJB14
12 mm
2
SJA or SJB15
SJA or SJB14
4
SJA or SJB15
SJA or SJB16
5/16-24
2
SJA or SJB17
SJA or SJB16
4
SJA or SJB17
Kit includes:
1 Tip
1 Tip Mounting Screw
TIP STYLE AND KIT NUMBERS
BRACKET
POSITION
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
SDB
65127-03
$25.75
65127-27
$32.25
65127-09
$25.75
65127-33
$32.25
65127-15
$25.75
65127-39
$32.25
65127-21
$25.75
65127-45
$32.25
SDS
65127-04
$25.75
65127-28
$32.25
65127-10
$25.75
65127-34
$32.25
65127-16
$25.75
65127-40
$32.25
65127-22
$25.75
65127-46
$32.25
SDG
65127-05
$25.75
65127-29
$32.25
65127-11
$25.75
65127-35
$32.25
65127-17
$25.75
65127-41
$32.25
65127-23
$25.75
65127-47
$32.25
JAW A POSITION 3 TIPS
SB
JAW B POSITION 3 TIPS
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
JAW B POSITION 1 TIPS
V
JAW A POSITION 1 TIPS
KITS
62
(800) 624-8511
AC06
DDB/DCB
65127-06
$38.00
65127-30
$42.90
65127-12
$38.00
65127-36
$42.90
65127-18
$38.00
65127-42
$42.90
65127-24
$38.00
65127-48
$42.90
DDS/DCS
65127-07
$38.00
65127-31
$42.90
65127-13
$38.00
65127-37
$42.90
65127-19
$38.00
65127-43
$42.90
65127-25
$38.00
65127-49
$42.90
DDG/DCG
65127-08
$38.00
65127-32
$42.90
65127-14
$38.00
65127-38
$42.90
65127-20
$38.00
65127-44
$42.90
65127-26
$38.00
65127-50
$42.90
FRONT PROXIMITY SWITCH MOUNTING
B
ua
ir
e
SJx20 or SJx21
This option provides panel sensing with a tip that includes a
threaded mounting surface for a 12 mm barrel type proximity
switch. The threaded surface is an integral part of the tip providing a
robust solution that cleanly attaches to standard and flange jaws.
These tips are not a set. They must be used with the following
standard tips: double diamonds or double cones. The standard tips
must be called out in the model number and specified (black, silver,
or gold) for the material thickness and jaw style.
G
H
TIP STYLE PRICE ADDER
$50.75
SJA or SJB20, 21 DDx/DCx
GRM2
2 [6]
Standard tips are specified on jaw A and jaw B. The switch position must be specified.
The price adder is in addition to the cost of the standard tip.
M
DOUBLE DIAMOND POINT
SJx20
GRM2TS-2- 45DCB -45 DDB -LAA -SJB20
SHADED CODES
J
S
DOUBLE CONE POINT
SJx21
SB
1.462
[37.1]
.750
[19.1]
1.078
[27.4]
Pxxxx
1.530
[38.9]
Dxxxx
pn
e
M12 x 1.0
THREAD THRU
NOTES:
Kxxxx
.272
[6.9]
PS(R)xxx
.250
[6.4]
SJ
T
ACCESSORY CODE
JAW
PROXIMITY CLAMP
A OR B
THREAD
SIZE
SJA or SJB20
12 mm
2
SJA or SJB21
TIP STYLE AND KIT NUMBERS
DDB/DCB
65160-03
$50.75
DDS/DCS
65160-04
$50.75
DDG/DCG
65160-05
$50.75
V
Kit includes:
1 Tip with welded mounting bracket
1 Tip Mounting Screw
KITS
63
(800) 624-8511
AC06
B
G
CODE
TA001* TA002* TA003** TA004** TA005 TA006 TA007 TA008 TA009 TA010 TA017 TA018 TA019 TA020 TA021 TA022 TA023 TA024 TA025 TA026 TA027 TA030 TA031 TA032 TA033 TA034* TA035* TA036* TA037** TA038** TA039** TA040 TA041 TA042 TA043 TA044 TA045 TA046 TA047 TA052 TA055 TA060 TA061 TA063 TA064 TA065 TA066 TA067 TA068 TA071 TA072 TA073 TA074 TA075 TA076 TA077 TA078 TA079 TA080 TA081 TA082 -
H
J
M
S
SB
Pxxxx
- TAxxx
- TBxxx
TIP OPTIONS - JAW A
TIP OPTIONS - JAW B
TIP
30° single diamond
30° single diamond
30° single diamond
30° single diamond
Single socket
Single socket
Single socket
Single ball
Single ball
Single ball
Tip extension (duckbill)
Tip extension (wing tip)
Sharp cone point
Sharp cone point
Sharp cone point
Double cone point
Double cone point
Double cone point
Double diamond point
Short offset
Long offset
Long offset
Long offset
30° Double diamond
30° Double diamond
30° Double diamond
30° Double diamond
30° Double diamond
30° Double diamond
Hard urethane
Hard urethane
Double no scratch
Double no scratch
Double no scratch
Double no scratch
Double no scratch
Double no scratch
Double urethane
Double urethane
Drawbead
Drawbead
Sharp double cone point
Hard urethane
Hard urethane
Hard urethane
15° single diamond
15° single diamond
15° single diamond
15° single diamond
15° single diamond
15° single diamond
15° double diamond
15° double diamond
15° double diamond
15° double diamond
15° double diamond
15° double diamond
COLOR
black
silver
black
silver
black
silver
gold
black
silver
gold
—
—
black
silver
gold
black
silver
gold
black
silver
gold
—
black
silver
gold
black
silver
gold
black
silver
gold
red
red
black
silver
gold
black
silver
gold
yellow
yellow
black
silver
black
silver
gold
blue
blue
blue
black
silver
gold
black
silver
gold
black
silver
gold
black
silver
gold
USE WITH OPTION:
TB001
TB002
TB003
TB004
See Tx005-010
"
"
"
"
"
TB017
TB018
See Tx019-021
"
"
See Tx022-027
"
"
"
"
"
TB031-TB033
TB030
TB030
TB030
TB034
TB035
TB036
TB037
TB038
TB039
TB040
TB041
See Tx042-047
"
"
"
"
"
TB055
TB052
TB030
TB030
See Tx063-065
"
"
See Tx066-068
"
"
See Tx071-082
"
"
"
"
"
"
"
"
"
"
"
pn
e
Dxxxx
ua
ir
e
TIP OPTIONS: CLAMP ACCESSORIES
Kxxxx
PS(R)xxx
SJ
T
V
KITS
* upward mounting
** downward mounting
64
(800) 624-8511
AC06
CODE
TB001* TB002* TB003**TB004**TB005 TB006 TB007 TB008 TB009 TB010 TB017 TB018 TB019 TB020 TB021 TB022 TB023 TB024 TB025 TB026 TB027 TB030 TB031 TB032 TB033 TB034* TB035* TB036* TB037**TB038**TB039**TB040 TB041 TB042 TB043 TB044 TB045 TB046 TB047 TB052 TB055 TB060 TB061 TB063 TB064 TB065 TB066 TB067 TB068 TB071 TB072 TB073 TB074 TB075 TB076 TB077 TB078 TB079 TB080 TB081 TB082 -
TIP
30° single diamond
30° single diamond
30° single diamond
30° single diamond
Single socket
Single socket
Single socket
Single ball
Single ball
Single ball
Tip extension (duckbill)
Tip extension (wing tip)
Sharp cone point
Sharp cone point
Sharp cone point
Double cone point
Double cone point
Double cone point
Short offset
Long offset
Long offset
Long offset
30° Double diamond
30° Double diamond
30° Double diamond
30° Double diamond
30° Double diamond
30° Double diamond
Hard urethane
Hard urethane
Double no scratch
Double no scratch
Double no scratch
Double no scratch
Double no scratch
Double no scratch
Double urethane
Double urethane
Drawbead
Drawbead
Hard urethane
Hard urethane
Hard urethane
15° single diamond
15° single diamond
15° single diamond
15° single diamond
15° single diamond
15° single diamond
15° double diamond
15° double diamond
15° double diamond
15° double diamond
15° double diamond
15° double diamond
* upward mounting
COLOR
black
silver
black
silver
black
silver
gold
black
silver
gold
—
—
black
silver
gold
black
silver
gold
black
silver
gold
—
black
silver
gold
black
silver
gold
black
silver
gold
red
red
black
silver
gold
black
silver
gold
yellow
yellow
black
silver
black
silver
gold
blue
blue
blue
black
silver
gold
black
silver
gold
black
silver
gold
black
silver
gold
USE WITH OPTION:
TA001
TA002
TA003
TA004
See Tx005-010
"
"
"
"
"
TA017
TA018
See Tx019-021
"
"
See Tx022-027
"
"
"
"
"
TA031-TA033
TA030
TA030
TA030
TA034
TA035
TA036
TA037
TA038
TA039
TA040
TA041
See Tx042-047
"
"
"
"
"
TA055
TA052
TA030
TA030
See Tx063-065
"
"
See Tx066-068
"
"
See Tx071-082
"
"
"
"
"
"
"
"
"
"
"
** downward mounting
30° SINGLE DIAMOND TIP
B
ua
ir
e
Tx001 to Tx004
This option provides single diamond tips with the gripping
surface on a 30° angle. The tips can be used to grip angled surfaces
while keeping the clamp parallel, decreasing the space required by
the clamp. These tips are a set and must be used as a pair.
Tx001 to Tx004 accessories are only available for GRMxxS
clamps.
G
H
ACCESSORY
PRICE ADDER
TA or TB001, 002, 003, & 004
GRM2
2 [6]
$43.95
Price adder is for one 30° tip mounted to jaw.
J
GRM2T S -2-45 blank -45 blank -LAA -TA001 -TB001
SHADED CODES
M
S
UPWARD MOUNTING
TA001/TB001 = black
DOWNWARD MOUNTING
TA002/TB002 = silver
TA003/TB003 = black
SB
JAW A
JAW A
Pxxxx
PART
30°
Dxxxx
30°
PART
.236
[6.0]
pn
e
JAW B
.197 [5.0] HEX
.750
[19.0]
JAW B
NOTES:
1.000
[25.4]
CLAMP
SIZE
2
2
KIT
NUMBER
65106-01
65106-02
TIP
COLOR
black
silver
LIST
PRICE
$43.95
$43.95
Kxxxx
PS(R)xxx
FOR STANDARD JAW STYLES ONLY
MATERIAL
THICKNESS
MOUNTING
TIP
(mm)
ORIENTATION
COLOR
TIP OPTION
0 - 1.5
upward
black
TA001/TB001
upward
silver
TA002/TB002 1.51 - 3.0
0 - 1.5
downward
black
TA003/TB003
downward
silver
TA004/TB004 1.51 - 3.0
Assembling the tips rotated 180° turns upward mounting into
downward mounting.
SJ
T
V
Kit includes:
1 30° Single Diamond Tip
1 Mounting Screw
KITS
65
(800) 624-8511
AC06
G
H
J
M
Tx005 to Tx010
AVAILABLE ON
DESIGN NO.
ACCESSORY
PRICE ADDER
TA or TB005, 6, or 7
$13.55
GRM2
2 [6]
TA or TB008, 9, or 10
$12.75
$13.90
TA or TB005, 6, or 7
GRM4
2 [6]
TA or TB008, 9, or 10
$13.10
A tip must be specified for jaw A and jaw B. Price adder is per tip.
GRM2TS-2-45 blank -45 blank -LAA -TA008 -TB005
SHADED CODES
SB
No scratch tips reduce the “fines” or flakes generated when
transferring galvanized panels. The tips have smooth curved
surfaces that grip the panels, but don’t scratch the plating, therefore
eliminating most “fines” that cause dirty dies and marked panels.
These tips are a set. The ball tip needs to be matched to a
socket tip. Both the ball and socket need to be specified based on
the material thickness.
S
NO SCRATCH TIPS
ua
ir
e
B
RECOMMENDED TIP COMBINATION
Pxxxx
STANDARD JAW STYLE
MATERIAL THICKNESS (mm)
TIP
TIP
CLAMP
0 to
1.51 to
3.01 to
SIZE
3.00
4.00
JAW TYPE CODE 1.50
ball
TA
008
009
010
A
2 or 4
socket
TB
005
006
007
B
pn
e
Dxxxx
FLANGE JAW STYLE
TIP
TIP
CLAMP
SIZE
JAW TYPE CODE
ball
TA
A
2
socket
TB
B
0 to .86 to 1.21 to 1.53 to 1.95 to 2.30 to
0.85
1.94
1.2
2.29
1.52
2.6
008
009
009
010
010
010
005
006
005
006
005
007
JAW A
Kxxxx
PS(R)xxx
SJ
13 mm HEX
SOCKET
JAW B
T
V
BALL
CLAMP
SIZE
2
KITS
4
005
65100-13
$13.55
65100-19
$13.90
CODE TA OR TB KIT NUMBERS AND PRICES
009
008
007
006
65100-17
65100-16
65100-15
65100-14
$12.75
$12.75
$13.55
$13.55
65100-23
65100-22
65100-21
65100-20
$13.10
$13.10
$13.90
$13.90
66
(800) 624-8511
AC06
010
65100-18
$12.75
65100-24
$13.10
Kit includes:
1 Tip
B
DUCKBILL TIP EXTENSION
ua
ir
e
Tx017
The Duckbill provides a tip mounting beam that reaches
forward to clamp parts in small confined areas. The Duckbill itself
mounts to standard jaws, providing a long beam with multiple tip
mounting threads in front of the jaw.
Standard tips can be attached to these threads. Tips should be
specified normally (black, silver, and gold) for the material thickness
on that jaw style. Tips will be mounted on outboard threads as shown.
G
H
AVAILABLE ON
DESIGN NO.
PRICE ADDER
GRM2
2 [6]
$46.55
Price adder is for 1 Duckbill mounted to the jaw.
A Duckbill must be specified on jaw A and jaw B.
J
M
GRM2T S -2-45 SDB -45 SDB -LAA -TA017 -TB017
S
(E8)
E6
SB
E10
E7
E9
Pxxxx
SIZE 2
mm
in
LETTER DIM.
2.146 54.5
J7
1.044 26.5
E1
E2 (CLOSED) 2.074 52.7
E3 (OPEN 22°) 3.088 78.4
E3 (OPEN 45°) 4.669 118.6
E3 (OPEN 75°) 5.585 141.9
E4 (CLOSED) 5.566 141.4
E4 (OPEN 22°) 5.079 129.0
E4 (OPEN 45°) 3.878 98.5
E4 (OPEN 75°) 1.882 47.8
5.146 130.7
E5
1.000 25.4
E6
.500 12.7
E7
3.000 76.2
E8
.628 16.0
E9*
1.250 31.8
E10
3.716 94.4
E11
4.4
.174
E12
16.5
.65
E13
*TOLERANCE FOR E9 = ± .003 [± .076]
3X M8 X 1.25 LOCKING
THREAD THRU
(BOTH TIP EXTENSIONS)
E5
JAW PIVOT
E4 (CLOSED)
Dxxxx
E11
(TO END OF FLAT)
pn
e
J7
Kxxxx
E2
E1
(PARALLEL) (CLOSED)
PS(R)xxx
E12
(PARALLEL)
E13
SJ
E4
T
E3
V
CLAMP
SIZE
2
KIT
NUMBER
65133-03
LIST
PRICE
$46.55
Kit includes:
1 Duckbill
1 Mounting Screw
NOTES:
67
(800) 624-8511
AC06
KITS
G
H
J
M
Tx018
WING TIP EXTENSION
ua
ir
e
B
The wing tip provides a tip mounting beam that reaches
sideways, providing a long beam with multiple tip mounting threads
on both sides of the clamp. Spreading the tips out, causing less
deflection in thin panels, standard tips can be attached at these
threads. Tips should be specified normally (black, silver, or gold) for
the material thickness on that jaw style. Tips should be ordered
separately as kits.
PRICE ADDER
AVAILABLE ON
DESIGN NO.
$51.72
GRM2
2 [6]
$61.21
GRM4
2 [6]
Price adder is for 1 wing tip mounted to the jaw.
A wing tip must be specified on jaw A and jaw B.
S
SHADED CODES
JAW
PIVOT
SB
4X M8 x 1.25 LOCKING
THREAD THRU
(BOTH TIP EXTENSIONS)
Pxxxx
Dxxxx
E5
E10
NOTES:
3) *TOLERANCE FOR E9 = ± .003 [± .076]
E7
E8
E3
(TO END OF FLAT)
J7
pn
e
JAW PIVOT
E6
E9
(MOUNTING
SURFACE)
Kxxxx
E1
E2
(CLOSED) (PARALLEL)
PS(R)xxx
SJ
T
V
KITS
CLAMP
SIZE
2
4
J7
E1
in
mm
2.146 54.5
2.815 71.5
in
mm
1.074 27.3
1.584 40.2
E2 (closed)
in
mm
2.314 58.8
2.684 68.2
E3
in
mm
2.440 62.0
2.680 68.1
E4
(PARALLEL)
LETTER DIMENSION
E5
E6
in mm
in
in
mm
mm
.194 4.9
2.146 54.5 3.250 82.6
.184 4.7
2.815 71.5 3.500 88.9
E4
If ordering as a kit, modification to impact plates may be required
KIT
CLAMP
LIST Kit includes:
1 Wing Tip
NUMBER PRICE
SIZE
1 Mounting Screw
65134-03 $51.72
2
1 Impact Plate modification print
65134-04 $61.21
4
68
(800) 624-8511
AC06
E7
in
mm
5.250 133.4
5.500 139.7
E8
in
mm
6.000 152.4
6.500 165.1
E9*
in mm
.628 16.0
.783 19.9
IMPACT PLATE REPLACEMENT KIT THAT
REQUIRES NO MODIFICATION
CLAMP
SIZE
2
4
KIT
NUMBER
63967-04
64638-04
LIST Kit includes:
2 Impact Plates
PRICE
6 Screws
$9.50
$13.40
E10
in mm
.746 18.9
1.125 28.6
SHARP CONE POINT TIP
B
ua
ir
e
Tx019 to Tx021
Sharp cone points have a tip that is very sharp (less than .015 in
[0.4 mm]). They should be used with a single diamond tip (SDB,
SDS, or SDG) mounted opposite them or a single chisel (C).
Tips should be specified (black, silver, or gold) for the material
thickness and jaw style. Sharp cones can be used on jaw A or jaw B.
G
H
ACCESSORY
PRICE ADDER
TA or TB019, 020, or 021
$7.60
GRM2
2 [6]
TA or TB019, 020, or 021
$8.00
GRM4
2 [6]
Price adder is for one single sharp cone point tip mounted to a jaw.
J
M
GRM2TS-2-45 blank -45 SDB -LAA -TA019
S
SB
For simplicity, these tables show the sharp cone on jaw A.
STANDARD JAW STYLE
CLAMP
TIP
JAW CODE
SIZE
A
TA
2 or 4
B
SDx
0 to 1.51 to 3.01 to
1.50
3.00
4.00
019
020
021
SDB
SDS
SDG
FLANGE JAW STYLE
CLAMP
TIP
SIZE
JAW CODE
A
TA
2
B
SDx
0 to .86 to 1.21 to 1.53 to 1.95 to 2.30 to
0.85 1.20
1.52
1.94
2.29
2.60
019
020
021
020
021
021
SDB SDB
SDB
SDS
SDS
SDG
Pxxxx
pn
e
Dxxxx
JAW A
Kxxxx
PS(R)xxx
SJ
JAW B
T
CLAMP
SIZE
2
4
CODE TA OR TB KIT NOS. AND PRICES
021
019
020
65131-03
65131-01
65131-02
$7.60
$7.60
$7.60
65131-06
65131-04
65131-05
$8.00
$8.00
$8.00
Kit includes:
1 Tip
V
KITS
69
(800) 624-8511
AC06
G
H
J
M
S
SB
DOUBLE CONE AND DIAMOND TIP
FOR MOUNTING FLAT PROXIMITY SWITCH
ua
ir
e
B
Tx022 to Tx027
This option provides panel sensing with a diamond tip that
mounts and protects a proximity switch (S01) in a very small tip
package. A special matching cone point tip (Tx022 - 024) is
required. Both diamond and cone point tips mount on standard and
flange style jaws, creating a very flexible sensing package. Both the
cone point and diamond tip need to be specified based on jaw style
and material thickness. See recommended tip combination on the
next page.
ACCESSORY
PRICE ADDER
TA or TB022, 023, or 024
$47.20
GRM2
2 [6]
TA or TB025, 026, or 027
$54.50
GRM2TS-2-45 blank -45 blank -LAA -S01 -TA022 -TB025
Pxxxx
pn
e
Dxxxx
Kxxxx
DOUBLE CONE
DOUBLE DIAMOND
Tx022 - 024
Tx025 - Tx027
Kit includes:
1 Tip
1 Mounting Screw
Kit includes:
1 Tip
1 Mounting Screw and Washer
PS(R)xxx
SJ
T
V
KITS
OPTION
Tx022
Tx023
Tx024
Tx025
Tx026
Tx027
TIP COLOR
black
silver
gold
black
silver
gold
KIT NO. LIST PRICE
65136-04
$47.20
65136-05
$47.20
65136-06
$47.20
65136-07
$54.50
65136-08
$54.50
65136-09
$54.50
70
(800) 624-8511
AC06
B
ua
ir
e
FLANGE JAW STYLE
TIP
TIP
CLAMP
SIZE
JAW TYPE CODE
TA
cone
A
2
B diamond TB
T10
0 to
0.85
022
025
.86 to 1.21 to 1.53 to 1.95 to
1.94
1.2
2.29
1.52
023
023
024
024
026
025
026
025
2.30 to
2.6
024
027
G
H
J
T12
T13
T14
JAW A
JAW B
T16 HEX
T15
PANEL
JAW PIVOT
T16 HEX
T16 HEX
SIZE 2
mm
in
7.5
.295
2.462 62.5
2.752 69.9
3.188 81.0
1.530 38.9
.6
.025
1.378 35.0
1.669 42.4
2.106 53.5
1.646 41.8
5.0
.197
T10
JAW PIVOT
S
CHISEL JAW STYLE
TIP
CLAMP
TIP
0 to
1.51 to
3.01 to
SIZE
3.00
4.00
JAW TYPE CODE 1.50
2
025
026
027
A diamond TA
T9
SB
Pxxxx
JAW A
Dxxxx
JAW B
T11
PANEL
pn
e
LETTER DIM.
T5
T7
T8
T9
T10
T11
T12
T13
T14
T15
T16
M
GRM2TF-2-85-00-S01-TA022-TB025
T16 HEX
T10
JAW
PIVOT
GRM2TD-2-75-00-JB01-S01-TA025
Kxxxx
NOTE: JB01 REQUIRED FOR CHISEL JAW
STANDARD JAW STYLE
3.01 to
1.51 to
0 to
TIP
TIP
CLAMP
4.00
3.00
SIZE
JAW TYPE CODE 1.50
024
023
022
cone
TA
A
2
027
026
025
B diamond TB
T9
T8
T7
PS(R)xxx
SJ
T
JAW A
PANEL
V
T11
JAW B
T16 HEX
T5 MAX
GRM2TS-2-75-00-S01-TA022-TB025
or
GRM2TS-2-75-75-S01-TA022-TB025
71
(800) 624-8511
AC06
KITS
G
H
SHORT & LONG OFFSET TIP
ua
ir
e
B
Tx030 to Tx033
Offset tips are double diamonds with the gripping surface
shifted off the centerline providing more clearance to clamp panels
with flanges up to 1.125 in [28.5 mm] long. These tips are a set and
must be used as a pair. The short tip -030 is used for all material
thicknesses. The long tip, -031, -032, or 033 is specified based on
the material thickness.
and GRMxxK.
JAW A
PART
JAW B
J
M
S
SB
ACCESSORY
PRICE ADDER
TA030 or TB030 $52.50 each
TA031 or TB031 $51.15 each
GRM2
2 [6]
TA032 or TB032 $51.15 each
TA033 or TB033 $51.15 each
AVAILABLE ON
DESIGN NO.
Pxxxx
JAW A
Dxxxx
CUSTOMER PART DETAIL
pn
e
1.151
[29.2]
Kxxxx
LONG TIP
1.125
[28.5]
.285 [7.2]
SHORT TIP
PANEL CL
PS(R)xxx
JAW B
.295 [7.5]
.750
[19.1]
SJ
NOTES:
1.53
[38.9]
T
.197 [5.0]
HEX
V
CLAMP
SIZE
2
KITS
KIT
NUMBER PRICE
65405-03 $103.65
65405-04 $103.65
65405-05 $103.65
TYPE
long
long
long
MATERIAL
THICKNESS (mm)
CODE
0 - 1.5
TA or TB031
1.51 - 3.0
TA or TB032
3.01 - 4.0
TA or TB033
72
(800) 624-8511
AC06
TIP
COLOR
black
silver
gold
Kit includes:
1 Short Tip -Tx030
1 Long Tip specified -Tx031 through Tx033
2 Mounting Screws
1 Washer
30° DOUBLE DIAMOND TIP
B
ua
ir
e
Tx034 to Tx039
This option provides double diamond tips with the gripping
surface on a 30° angle. The tips can be used to grip angled surfaces
while keeping the clamp parallel, decreasing the space required by
the clamp. These tips are a set and must be used as a pair.
clamps.
G
H
ACCESSORY
PRICE ADDER
TA or TB034, 035, or 036
$50.90
GRM2
2 [6]
TA or TB037, 038, or 039
$50.90
Price adder is for one 30° tip mounted to the jaw.
J
M
SHADED CODES
S
UPWARD MOUNTING
TA034/TB034 = black
TA036/TB036 = gold
DOWNWARD MOUNTING
SB
TA037/TB037 = black
TA039/TB039 = gold
Pxxxx
JAW A
JAW A
PART
Dxxxx
30°
30°
pn
e
PART
JAW B
.197 [5.0] HEX
.236
[6.0]
.749
[19.0]
NOTES:
1.530
[38.9]
CLAMP
SIZE
2
2
2
KIT
NUMBER
65149-03
65149-04
65149-05
TIP
COLOR
black
silver
gold
LIST
PRICE
$50.90
$50.90
$50.90
Kxxxx
JAW B
Kit includes:
1 30° Double Diamond Tip
1 Mounting Screw
SJ
MATERIAL
THICKNESS
MOUNTING
TIP
(mm)
ORIENTATION
COLOR
TIP OPTION
0 - 1.5
upward
black
TA034/TB034
upward
silver
TA035/TB035 1.51 - 3.0
upward
gold
TA036/TB036 3.01 - 4.0
0 - 1.5
downward
black
TA037/TB037
downward
silver
TA038/TB038 1.51 - 3.0
downward
gold
TA039/TB039 3.01 - 4.0
Assembling the tips rotated 180° turns upward mounting into
downward mounting.
T
V
KITS
73
(800) 624-8511
AC06
PS(R)xxx
B
ua
ir
e
Tx040 to Tx041
HARD URETHANE TIPS
G
H
J
M
Tx066 to Tx068
This option provides harder urethane tips. They are made
from 93 Durometer Shore A colored red and 85 Durometer Shore A
colored blue for easy identification. These tips provide greater
resistance to panel slippage and more resistance to wear than our
standard 75 Durometer black tips (DUB or SUB). All dimensions and
mounting hardware are identical to the standard urethane tips. These
tips accommodate 0 to 3.0 mm material thickness on all jaw styles,
except on flange jaws. See material thickness chart below.
S
SB
GRM2
2 [6]
GRM4
2 [6]
GRM2
2 [6]
GRM4
GRM2
2 [6]
2 [6]
ACCESSORY
TA040 or TB040
TA066 or TB066
TA040 or TB040
TA041 or TB041
TA067 or TB067
TA041 or TB041
TA068 or TB068
PRICE
ADDER
$10.35
$10.35
$11.00
$18.35
$18.35
$21.00
$38.45
ACCESSORY
GRM2xS GRMxC GRMxD GRMxF
CODE
Tx040, Tx041,
Tx066, Tx067, 0 to 3.0 0 to 3.0 0 to 3.0 0 to 2.0
& Tx068
Pxxxx GRM2TS-2-45 blank -45 blank -LAA -TA041 -TB041
SHADED CODES
Dxxxx All unshaded model codes are example only.
pn
e
Kxxxx SINGLE URETHANE PAD
(HARD)
DOUBLE URETHANE PAD
(HARD)
ROUNDED URETHANE PAD
(HARD)
Tx040 (RED)
Tx066 (BLUE)
Tx041 (RED)
Tx067 (BLUE)
Tx068 (BLUE)
PS(R)xxx
SJ
T
KIT NUMBERS AND PRICES IF ORDERED SEPARATELY
SIZE
2
4
2
4
2
2
2
V
KITS
OPTION STYLE TIP COLOR DUROMETER
red
93 Shore A
Tx040
single
red
93 Shore A
Tx040
single
red
93 Shore A
Tx041
double
red
93 Shore A
Tx041
double
blue
85 Shore A
Tx066
single
blue
85 Shore A
Tx067
double
blue
85 Shore A
Tx068 rounded
KIT NO. LIST PRICE
65163-03
$10.35
65163-05
$11.00
65163-04
$18.35
65163-06
$21.00
65163-07
$10.35
65163-08
$18.35
65174-05
$38.45
74
(800) 624-8511
AC06
Kit includes:
1 Hard Urethane Tip
1 Mounting Screw
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
75
(800) 624-8511
AC06
G
H
J
DOUBLE NO SCRATCH TIPS
ua
ir
e
B
Tx042 to Tx047
No scratch double tips reduce the “fines” or flakes generated
when transferring galvanized panels. The tips have smooth curved
surfaces that grip the panels but don’t scratch the plating and therefore
eliminate most fines that cause dirty dies and marked panels.
They allow panel sensing by providing a protected mounting
location for the (S01) proximity switch. Both round and flat tips
mount on standard and flange style jaws, creating a very flexible
sensing package. These tips are a set. The round tip needs to be
matched to a flat tip. Both the round and flat tip need to be specified
based on jaw style and material thickness. See recommended tip
combinations on the next page.
ROUNDED
FLAT
M
S
ACCESSORY
PRICE ADDER
TA or TB042, 043, or 044
$44.25
GRM2
2 [6]
TA or TB045, 046, or 047
$44.25
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
DOUBLE NO SCRATCH
(ROUNDED)
DOUBLE NO SCRATCH
(FLAT)
Tx042 - 044
Tx045 - Tx047
Kit includes:
1 Tip
1 Mounting Screw
Kit includes:
1 Tip
PS(R)xxx
SJ
T
V
KITS
OPTION
Tx042
Tx043
Tx044
Tx045
Tx046
Tx047
TIP COLOR
black
silver
gold
black
silver
gold
KIT NO. LIST PRICE
65151-04
$44.25
65151-05
$44.25
65151-06
$44.25
65151-07
$44.25
65151-08
$44.25
65151-09
$44.25
76
(800) 624-8511
AC06
ua
ir
e
B
FLANGE JAW STYLE
TIP
TIP 0 to .86 to 1.21 to 1.53 to 1.95 to 2.30 to
CLAMP
1.52
1.94
2.29
2.6
SIZE
JAW TYPE CODE .85 1.2
044
042 043
043
044
044
A rounded TA
2
flat
TB
045
045 045
046
046
047
B
T10
G
H
J
T12
T13
T14
JAW B
T16 HEX
JAW A
T15
GRM2TF-2-85-00-S01-TA042-TB045
JAW
PIVOT
T16 HEX
T10
JAW
PIVOT
STANDARD JAW STYLE
TIP
TIP
CLAMP
SIZE
JAW TYPE CODE
flat
TA
2
A
1.51 to
3.01 to
0 to
3.00
4.00
1.50
043
044
042
T9
S
SB
Pxxxx
JAW A
Dxxxx
JAW B
T11
PANEL
pn
e
SIZE 2
mm
LETTER DIM.
in
7.5
T5
.295
T7
2.472 62.8
T8
2.722 69.1
T9
3.188 81.0
T10
1.530 38.9
.6
T11
.025
T12
1.388 35.3
T13
1.639 41.6
T14
2.106 53.5
T15
1.646 41.8
5.0
T16
.197
M
T16 HEX
PANEL
T16 HEX
T10
JAW
PIVOT
GRM2TD-2-75-00-JB01-S01-TA045
Kxxxx
NOTE: JB01 REQUIRED FOR CHISEL JAW
STANDARD JAW STYLE
TIP
TIP
0 to
1.51 to
3.01 to
CLAMP
3.00
4.00
SIZE
JAW TYPE CODE 1.50
042
043
044
A rounded TA
2
flat
TB
045
046
047
B
T9
T8
T7
PS(R)xxx
SJ
T
JAW A
PANEL
V
T11
JAW B
T16 HEX
GRM2TS-2-75-00-S01-TA042-TB045 KITS
T5 MAX
77
(800) 624-8511
AC06
G
H
J
M
Tx052 or Tx055
This option provides panel sensing with a double urethane tip
that mounts and protects a proximity switch (S01) in a very small
package. A special matching shorter urethane tip (Tx052) is
required. Urethane tips eliminate marks in show surfaces. Both
short and long tips mount on standard and flange style jaws,
creating a very flexible sensing package. These tips are a set. The
short tip needs to be matched to a long tip. See recommended tip
combinations on the next page.
SHORT
ACCESSORY
PRICE ADDER
TA or TB052
$25.08
GRM2
2 [6]
TA or TB055
$30.10
S
DOUBLE URETHANE TIPS
ua
ir
e
B
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
DOUBLE URETHANE
(SHORT)
DOUBLE URETHANE
(LONG)
Tx052
Tx055
SJ
T
Kit includes:
1 Tip
1 Mounting Screw
V
KITS
OPTION
Tx052
Tx055
Kit includes:
1 Tip
1 Mounting Screw
TIP COLOR KIT NO. LIST PRICE
65150-04
$25.08
red
65150-05
$30.10
red
78
(800) 624-8511
AC06
LONG
B
ua
ir
e
FLANGE JAW STYLE
TIP
TIP
CLAMP
SIZE
JAW TYPE CODE
TA
short
A
2
TB
long
B
T10
0 to
2.00
052
055
G
H
J
T12
T13
T14
T16 HEX
T15
T16 HEX
PANEL
2X T16 HEX
T10
GRM2TF-2-85-00-S01-TA052-TB055
S
STANDARD JAW STYLE
TIP
TIP
0 to
CLAMP
3.00
SIZE
JAW TYPE CODE
short
TA
052
A
2
long
TB
055
B
SB
T9
T8
JAW
PIVOT
Pxxxx
T7
JAW A
PANEL
Dxxxx
T11
pn
e
SIZE 2
mm
in
LETTER DIM.
6.0
.236
T5
1.768 44.9
T7
2.771 70.4
T8
3.188 81.0
T9
1.530 38.9
T10
2.5
.100
T11
.686 17.4
T12
1.688 42.9
T13
2.106 53.5
T14
1.721 43.7
T15
5.0
.197
T16
M
JAW A
JAW B
JAW
PIVOT
JAW B
GRM2TS-2-75-75-S01-TA052-TB055
T16 HEX
T10
PS(R)xxx
STANDARD JAW STYLE
TIP
TIP
0 to
CLAMP
3.00
SIZE
JAW TYPE CODE
short
TA
052
A
2
long
TB
055
B
SJ
T9
T8
JAW
PIVOT
Kxxxx
T
T7
JAW A
PANEL
V
T11
JAW B
T16 HEX
GRM2TS-2-75-00-S01-TA052-TB055
T5 MAX
79
(800) 624-8511
AC06
KITS
G
H
J
M
Tx060 to Tx061
JAW A
The drawbead tip is a double tip that is shaped similar to the
inside of a drawbead. This shape allows it to transfer the panels by
gripping the center of the drawbead. The opposite tip is a short
double diamond that grips the other side of the panel. These tips
grip the bottom of the drawbead (not the sides), so material
thickness is needed. These tips are a set; the short diamond tip -030
is used for all material thicknesses. The long drawbead tip, -060 and
-061, is specified based on the material thickness. Available for S
and K jaw styles only.
JAW B
PANEL WITH
DRAW BEAD
ACCESSORY
PRICE ADDER
TA or TB060 and 061
$61.93
GRM2
2 [6]
TB030
$52.50
AVAILABLE ON
DESIGN NO.
S
DRAWBEAD AND OFFSET TIP
ua
ir
e
B
GRM2T S -2-45 blank -45 blank -LAA -TA060 TB030
SB
Pxxxx
Tx060 .620 [15.7]
Tx061 .570 [14.5]
.285 [7.2]
Dxxxx
DRAWBEAD TIP
pn
e
.455 [11.6]
PANEL CL
Kxxxx
30°
SHORT DIAMOND TIP
.125 [3.2]
.369 [9.4]
.295 [7.5]
.197 [5.0] HEX
PS(R)xxx
SJ
.750 [19.0]
CLAMP
SIZE
1.530
[38.9]
2
T
STANDARD JAW
TIP
TYPE
JAW
drawbead
A
diamond
B
TIP
0 to
1.51 to
CODE
1.50
3.00
TA
060
061
TB
030
030
DRAWBEAD
SHORT OFFSET
DIAMOND
Tx060 - 061
Tx030
V
KITS
CLAMP
KIT
SIZE NUMBER
65171-03
2
65171-04
65405-06
PRICE
$61.93
$61.93
$52.50
MATERIAL
THICKNESS (mm)
CODE
TYPE
0 - 1.5
long TA or TB060
1.51 - 3.0
long TA or TB061
0 - 3.0
short TA or TB030
TIP
COLOR
black
silver
black
80
(800) 624-8511
AC06
Kit includes:
1 Drawbead Tip
1 Mounting Screw
Kit includes:
1 Offset Tip
SHARP DOUBLE CONE POINT TIP
Sharp cone points have a tip that is very sharp (less than .015 in
[0.4 mm]). They should be used with a double diamond tip (DDB,
DDS, or DDG) mounted opposite them or a chisel or shovel jaw.
Tips should be specified (black, silver, or gold) for the material
thickness and jaw style. Sharp cones can be used on jaw A or jaw B.
G
ACCESSORY
PRICE ADDER
GRM2
2 [6]
TA or TB063, 064, or 065
$35.70
Price adder is for one double sharp double cone point tip mounted to jaw.
B
ua
ir
e
Tx063 to Tx065
JAW A
H
JAW B
J
GRM2S S -2-45 blank -45 blank -LAA -TA063 -TB063
M
S
For simplicity, these tables show the sharp cone point tip on jaw A.
If sharp cones are ordered on jaw A & B, they will be mounted as shown.
SB
TA(B)063 = black
TA(B)064 = silver
TA(B)065 = gold
Pxxxx
0 to 1.51 to 3.01 to
4.00
3.00
1.50
065
064
063
DDG
DDS
DDB
FLANGE JAW STYLE
CLAMP
TIP
SIZE
JAW CODE
TA
A
2
DDx
B
pn
e
STANDARD JAW STYLE
CLAMP
TIP
SIZE
JAW CODE
TA
A
2
DDx
B
0 to .86 to 1.21 to 1.53 to 1.95 to 2.30 to
0.85 1.2
1.52
1.94
2.29
2.6
063
064
065
064
065
065
DDB DDB
DDB
DDS
DDS
DDG
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
CODE TA OR TB KIT NOS.
CLAMP
063
064
065
SIZE
71231-03 71231-04 71231-05
2
KIT
PRICE
$35.70
Kit includes:
1 Tip
1 Mounting Screw
KITS
81
(800) 624-8511
AC06
G
H
Tx071 to Tx082
M
This option provides single or double diamond tips with the
gripping surface on a 15° angle. The tips can be used to grip angled
surfaces while keeping the clamp parallel, decreasing the space
required by the clamp. These tips are a set and must be used as
a pair.
Tx071 to Tx082 accessories are only available for GRM2xK
and GRM2xS clamps.
ACCESSORY
TA or TB071 to 076
GRM2
2 [6]
TA or TB077 to 082
Price adder is for one 15° tip mounted to the jaw.
AVAILABLE ON
J
15° SINGLE OR DOUBLE DIAMOND TIP
ua
ir
e
B
DESIGN NO.
Tx071 TO Tx076
PRICE ADDER
$56.35
$61.10
GRM 2 TS-2-45 blank -45 blank -LAA -TA071 -TB071
Tx077 TO Tx082
S
SHADED CODES
SB
UPWARD MOUNTING
SINGLE
DOUBLE
TA071/TB071 = black
TA073/TB073 = gold
DOWNWARD MOUNTING
SINGLE
DOUBLE
TA077/TB077 = black
TA079/TB079 = gold
Pxxxx
TA074/TB074 = black
TA076/TB076 = gold
JAW A
JAW A
Dxxxx
TA080/TB080 = black
TA082/TB082 = gold
15°
PART
pn
e
15°
Kxxxx
JAW B
.236
[6.0]
JAW B
SINGLE DIAMOND TIP
PS(R)xxx
.197 [5.0] HEX
.750
[19.0]
SJ
.950
[24.1]
T
DOUBLE DIAMOND TIP
.750
[19.0]
NOTES:
1) ALL DIMENSIONS ARE REFERENCE
UNLESS SPECIFICALLY TOLERANCED.
2) ALL METRIC DIMENSIONS [ ] ARE GIVEN
IN MILLIMETERS 1 mm = .03937 in
.197 [5.0] HEX
V
1.530
[38.9]
KITS
82
(800) 624-8511
AC06
PART
TIP
CLAMP
STYLE COLOR
OPTION
SIZE
black
single
Tx071, Tx074
2
silver
single
Tx072, Tx075
2
gold
single
Tx073, Tx076
2
black
Tx077, Tx080 double
2
silver
Tx078, Tx081 double
2
gold
Tx079, Tx082 double
2
Kit includes:
1 15° Single or Double Diamond Tip
1 Mounting Screw
KIT
NUMBER
71229-03
71229-04
71229-05
71229-06
71229-07
71229-08
LIST
PRICE
$56.35
$56.35
$56.35
$61.10
$61.10
$61.10
FOR K AND S JAW STYLES ONLY
TIP OPTION
TA071/TB071
TA072/TB072
TA073/TB073
TA074/TB074
TA075/TB075
TA076/TB076
TA077/TB077
TA078/TB078
TA079/TB079
TA080/TB080
TA081/TB081
TA082/TB082
MATIERIAL
THICKNESS (mm)
0-1.5
1.51-3.0
3.01-4.0
0-1.5
1.51-3.0
3.01-4.0
0-1.5
1.51-3.0
3.01-4.0
0-1.5
1.51-3.0
3.01-4.0
TIP
COLOR
black
silver
gold
black
silver
gold
black
silver
gold
black
silver
gold
TIP
STYLE
single
single
single
single
single
single
double
double
double
double
double
double
MOUNTING
ORIENTATION
upward
upward
upward
downward
downward
downward
upward
upward
upward
downward
downward
downward
NOTES
ua
ir
e
B
G
H
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
83
(800) 624-8511
AC06
SEAL OPTIONS: CLAMP ACCESSORIES
ua
ir
e
B
- Vx
G
H
SEAL OPTIONS
V2 - Fluoro-elastomer seals for fluid compatibility
J
M
S
SB
Pxxxx
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
KITS
84
(800) 624-8511
AC06
SEAL OPTIONS: CLAMP ACCESSORIES
B
ua
ir
e
V2
FLUORO-ELASTOMER SEALS FOR
FLUID COMPATIBILITY
This option provides a Series GRM Clamp with fluoroelastomer seals that are compatible with certain fluids. Seal
compatibility should be checked with the fluid manufacturer for
proper application. This option is not for high temperature
applications. Consult PHD Clamp Division for high temperature
applications.
AVAILABLE ON
GRM2
DESIGN NO.
2 [6]
G
H
PRICE ADDER
$10.00
J
GRM 2 TS-2-45DCB-45DDB-LAA -V2
SHADED CODES
M
S
SB
ROD SEAL
Pxxxx
PISTON SEAL
BORE PLUG SEAL
pn
e
Dxxxx
Kxxxx
PS(R)xxx
SJ
T
V
REPLACEMENT KIT NUMBER AND PRICE
CLAMP SIZE
2
KIT NUMBER
65498-03
LIST PRICE
$10.00
Kit includes:
1 Rod Seal
1 Piston Seal
1 Bore Plug Seal
KITS
85
(800) 624-8511
AC06
KITS (CUSTOMER MOUNTED): CLAMP ACCESSORIES
G
H
ua
ir
e
B 18 mm OPTICAL PROXIMITY SENSOR
This customer mounted kit provides panel sensing by
mounting commercially available 18 mm optical proximity switches
that sense panel presence. The aluminum bracket mounts on top of
the impact plate. An integral urethane grommet firmly holds the
switch when the 6 mm clamp screw is tightened. The bracket can be
mounted on both sides of all the clamps except for flange style jaws
which mount only opposite the ports as shown.
For use with customer supplied Cuttler Hammer 18 mm Perfect
Prox side and end sensing. For compatibility with other units,
consult PHD.
J
M
S
SB
Pxxxx
Dxxxx
SB6
LETTER
DIM
SB1
SB2
SB3 MIN
SB3 MAX
SB4
SB5
SB6
SB7
SB8
SB5
pn
e
LONG BRACKET
SB1
Kxxxx
GRM2
SHORT BRACKET
LONG BRACKET
IMPERIAL METRIC
IMPERIAL METRIC
19.0
.748
19.0
.748
48.3
1.903
48.3
1.903
31.1
1.224
31.1
1.224
46.4
1.828
46.4
1.828
14.0
.551
14.0
.551
27.8
1.095
46.9
1.845
41.6
1.636
22.5
.886
37.7
1.483
37.7
1.483
61.7
2.428
61.7
2.428
SB2
PS(R)xxx
SB3
SJ
SB4
SB6
T
SHORT BRACKET
KIT NUMBERS AND LIST PRICES
V
CLAMP
SIZE
2
KITS
BRACKET
Short
Long
KIT
NUMBER
65200-03
65200-10
LIST
PRICE
$36.15
$51.64
Kit includes:
Bracket and Urethane Grommet
All screws required for installation
Switches are not included
86
(800) 624-8511
SB7
SB5
AC06
SB8
KITS (CUSTOMER MOUNTED): CLAMP ACCESSORIES
DATUM SURFACE
MACHINEABLE TIPS (STEEL & URETHANE)
ua
ir
e
B
This customer-mounted tip provides a steel or urethane blank
that can be machined to match panel contours. It has extra stock on
all sides, so it can be fitted to many applications. The steel blank is
made of unplated 4140 steel hardened to 27 - 32 Rc, and coated
with a rust preventative oil dip, it can be machined and used as is or
sent out for additional hardening and plating. The 90 Durometer red
urethane blank is bonded to a steel interface that includes the
mounting thread. Care should be taken when using these tips to
ensure the jaws close to the correct dimension, so that full grip
force and the locking feature are achieved. Do this by contouring
both tips to match the panel’s shape and thickness so that the
dimension measured from the datum surface on back of one tip
(including the panel) to the datum surface on the other tip is within
the range specified. This tip can be mounted on moving and fixed
standard and flange jaws.
G
H
J
M
PANEL
S
1.264 TO 1.320 [32.1 TO 33.5]
DATUM SURFACE TO DATUM SURFACE
PHD DOES NOT RECOMMEND
MACHINING BELOW THIS LINE
PANEL CL
F AND K STYLE JAWS ONLY
1.00
[25.4]
.323 [8.2]
STEEL
.86
[21.8] J16
SB
Pxxxx
.25 [6.4]
.537 [13.6]
.236 [6.0]
Dxxxx
pn
e
PHD DOES NOT RECOMMEND
MACHINING BELOW THIS LINE
PANEL
CLAMP
SIZE
2
2
KIT
NUMBER
65174-03
65174-04
LIST
PRICE
$27.21
$37.65
1.274 TO 1.400
[32.4 TO 35.6]
DATUM SURFACE TO
DATUM SURFACE
Kit includes:
1 Machineable Tip
MATERIAL
1 Mounting Screw
Steel
Urethane
PANEL CL
.30 [7.6]
1.00
[25.4]
.323 [8.2]
URETHANE
.86
[21.8] J16
Kxxxx
STEEL
PS(R)xxx
.537 [13.6]
.236 [6.0]
SJ
.197 [5.0]
HEX
T
1.53
[38.9]
V
KITS
87
(800) 624-8511
AC06
CLAMPING & SHEET METAL HANDLING SOLUTIONS
ua
ir
e
B
G
H
J
M
S
SERIES GRM CLAMPS
SERIES PNC CLAMPS
Greater Clamping Forces
Flexibility, Durability, Low Cost
Automated stamping for
part identification
2 Sizes
12 Jaw Style Options
Up to 500 lb Clamping Force
Locks in the Closed Position
Fully Field Repairable
Medium and Heavy Duty Sizes
Up to 26,280 lb Clamping Force
Optional Tandem Cylinder
Optional Welding Slag Shield
Optional Switches
SERIES PA CLAMPS
SERIES PB CLAMPS
Ideal for a wide variety of
automated part holding and
transfer applications
Work holding in a
welding environment
2 Sizes
Left or Right Rotation
Mounting on 2 Surfaces
Optional Anti-Backlash
Optional Weld Cover
Optional Switches
5 Sizes
Left or Right Rotation
Simple Design, Compact, Low
Weight, and High Clamp Force
Mounting on 3 Surfaces
Optional Switches
SB
SERIES PFC CLAMPS
SERIES PDG, PDK, PLL, & PHL
Ideal for heavy parts clamping
Ideal for automated part stopping,
positioning, & lifting applications
PDG
11,250 lb Total Clamping Force
Rugged Cam Design
Wide Jaw Throat
Optional Weld Cover
Optional Switches
Pxxxx
pn
e
Dxxxx
PDG “Disappearing Gage”
PDK “Crowder”
PLL “Lite Lifter”
PHL “Heavy Lifter”
Drop-in Replacements for GM Standards
1363 & 1363A and 90.35.05-A & B
Kxxxx
PS(R)xxx
SJ
T
V
PDK
SERIES PS CLAMPS
Pneumatic loading & unloading
of panels with one valve
3 Stroke Lengths
Powered with 1 External Valve
Easy Clamp Adjustment
Oversized Shock Pads
Uses GRM Size 2 Clamps
Ergonomic, Lightweight Design
PHD, Inc.
9009 Clubridge Drive
P.O. Box 9070, Fort Wayne, Indiana 46899 U.S.A.
Phone (260) 747-6151 • Fax (260) 747-6754
[email protected] • www.phdinc.com
KITS
88
PLL
PHL
PHD GmbH
Arnold-Sommerfeld-Ring 2
D-52499 Baesweiler GERMANY
Phone 02401-805 230 • Fax 02401-805 232
[email protected] • www.phd-gmbh.de
5M-I 500-A4 11/03 6063
(800) 624-8511
AC06

series grm clamps - Coast Pneumatics

Transcription

Similar documents

Heart Attack Warning Signs

HEART ATTACK - KNOW THE SYMPTOMS Poster

3-Jaw High Speed Power Chuck

Hydraulic HGV Ball Joint Separator Hydraulic Ball Joint

YABLONSKI It is with deep sadness that we announce the

this obituary - Moose Jaw Funeral Home

star tool supply / grand tool supply

Airo A Range A18 JE Articulated rotating platforms available from