SIKA Thermometers

Transcription

SIKA Thermometers

Measuring Instruments for
Marine Applications
Safety and precision on all seas
A name which means reliability
For more than 60 years SIKA has gained experience
in the field of measuring technique for the marine
industry. Everything started with the famous SIKA Thermometer, which is still an ongoing story of success. Precision,
quality and life time of SIKA thermometers still set the
global standard for V-shape glass thermometers.
Over the years, SIKA has developed a wide range of
measurement and calibration solutions for marine
applications.
Today, all well-known European makers of Diesel engines
and their world-wide licensees as well as many shipyards
are our customers. All products shown in this catalogue
are suitable for use in the marine field. Most of them are
approved by Germanischer Lloyd.
Products
page
Mechanical Measuring Instruments
SIKA Thermometers
SIKA Glass Inserts for replacement
Diesel Engine Protection Tubes
4-9
10
11
Diesel Engine Thermometers
12-15
Pressure Gauges
16-19
Electronic Monitoring Systems and Temperature Sensors
Electronic Digital Thermometer - SolarTemp
Temperature Sensors
22
23-27
KombiTemp®
28
CargoTempRoller
29
Display and Monitoring Systems
30-33
SIKA Test and Calibration Equipment
Temperature Calibrators
36-37
Pressure Calibrators
38-39
Recalibration Set
40-41
High Pressure Calibration Set
Hand Held Devices
Simulators
42
43-48
49
Gas Detection Equipment
Portable Gas Detectors
52-53
Hand Held Gas Detectors
54-57
Flow Measurement
Oval Gear Flow Meters
Paddle Flow Switches
60-61
62
Interactive Navigation
you can use the following Buttons
to jump directly to each chapter
or product page:
-2-
)RUZDUGForward to chapter
%DFNBack to chapter
Forward to product page
Back to content
Mechanical Measuring
Instruments
CONTENTS
-3-
SIKA Thermometers
SIKA Thermometer Type 271 B, straight
•
•
•
•
Casing 200 x 36 mm
DIN 16189 B
Connection thread: ½ BSP
Approved by Germanischer Lloyd Certificate
No. 94 654-94 HH
• Original SIKA Thermometer, made in Germany
Order code
Range [°C]
-30...50
Immersion tube length [l1] 63 mm
SIKA
2712351106321
ISSA
61.110.10
IMPA
65 19 01
0...60
2712061106321
61.110.16

0...100
2712101106321
61.110.22
65 19 04
0...120
2712121106321
61.110.28

0...160
2712161106321
61.110.34
65 19 07
0...250
2712251106321


0...300
2712301206321
61.101.19
65 20 53
61.110.80
65 19 22
0...600
2717601206322
Range [°C]
-30...50
2712351110021
61.110.11
65 19 02
0...60
2712061110021
61.110.17

0...100
2712101110021
61.110.23
65 19 05
0...120
2712121110021
61.110.29

0...160
2712161110021
61.100.83
65 19 08
0...250
0...300
2712251110021
2712301210021


61.101.20
65 19 54
61.110.81
65 19 23
0...600
2712601210022
Range [°C]
-30...50
2712351116021
61.110.12
65 19 03
0...60
2712061116021
61.110.18

0...100
2712101116021
61.110.24
65 19 06
0...120
2712121116021
61.110.30

0...160
2712161116021
61.110.36
65 19 09
0...250
2712251116021


0...300
2712301216021
61.101.21
65 19 55
0...600
2712601216022
61.110.82
65 19 24
Also available with connection threads: ¾ BSP, M 20x1.5, M 27x2, ½ NPT
CONTENTS
-4-
•
•
•
•
Casing 200 x 36 mm
DIN 16190 B
No. 94 654-94 HH
Order code
Range [°C]
-30...50
SIKA
2722351106321
ISSA
61.113.05
IMPA
65 20 01
0...60
2722061106321
61.113.08

0...100
2722101106321
61.113.11
65 20 04
0...120
2722121106321
61.113.14

0...160
2722161106321
61.113.17
65 20 07
0...250
2722251106321


0...300
2722301206321
61.10123
65 20 13
0...600
2722601206322
61.113.40
65 20 22
Range [°C]
-30...50
2722351110021
61.113.06
65 20 02
0...60
2722061110021
61.113.09

0...100
2722101110021
61.113.12
65 20 05
0...120
2722121110021
61.113.15

0...160
2722161110021
61.113.18
65 20 08
0...250
2722251110021


0...300
2722301210021
61.101.23
65 20 14
0...600
2722601210022
61.113.41
65 20 23
Range [°C]
-30...50
2722351116021
61.113.07
65 20 03
0...60
2722061116021
61.113.10

0...100
2722101116021
61.113.13
65 2006
0...120
2722121116021
61.113.16

0...160
2722161116021
61.113.19
65 20 09
0...250
2722251116021


0...300
2722301216021
61.10124
65 20 15
0...600
2722601216022
61.113.42
65 20 24
CONTENTS
-5-
SIKA Thermometer Type 272 B, angle 90°∢
•
•
•
•
Casing 150 x 36 mm
DIN 16185 B
No. 94 654-94 HH
Order code
Range [°C]
-30...50
SIKA
2912351106321
ISSA
61.111.10
IMPA
65 19 41
0...60
2912061106321
61.111.16

0...100
2912101106321
61.111.22
65 19 44
0...120
2912121106321
61.111.28

0...160
2912161106321
61.111.34
65 19 47
0...250
2912251106321


0...300
2912301206321
61.111.50
65 19 53
0...600
2912601206322
61.111.80
65 19 62
Range [°C]
-30...50
2912351110021
61.111.11
65 19 42
0...60
2912061110021
61.111.17

0...100
2912101110021
61.111.23
65 19 45
0...120
2912121110021
61.111.29

0...160
2912161110021
61.111.35
65 19 48
0...250
2912251110021


0...300
2912301210021
61.111.51
65 19 54
0...600
2912601210022
61.110.81
65 19 63
Range [°C]
-30...50
2912351116021
61.111.12
65 19 43
0...60
2912061116021
61.111.18

0...100
2912101116021
61.111.24
65 19 46
0...120
2912121116021
61.111.30

0...160
2912161116021
61.111.36
65 19 49
0...250
2912251116021


0...300
2912301216021
61.111.52
65 19 55
0...600
2912601216022
61.111.82
65 19 64
CONTENTS
-6-
•
•
•
•
Casing 150 x 36 mm, Type 292 B
DIN 16186 B
No. 94 654-94 HH
Order code
Range [°C]
-30...50
SIKA
2922351106321
ISSA
61.114.08
IMPA
65 20 41
0...60
2922061106321
61.114.13

0...100
2922101106321
61.114.18
65 20 44
0...120
2922121106321
61.114.23

0...160
2922161106321
61.114.28
65 20 47
0...250
2922251106321


0...300
2922301206321
61.114.38
65 20 53
0...600
2922 601206322
61.114.43
65 20 62
Range [°C]
-30...50
2922351110021
61.114.09
65 20 42
0...60
2922061110021
61.114.14

0...100
2922101110021
61.114.19
65 20 45
0...120
2922121110021
61.114.24

0...160
2922161110021
61.114.29
65 20 48
0...250
2922251110021


0...300
2922301210021
61.114.39
65 20 54
0...600
2922601210022
61 114.44
65 20 63
Range [°C]
-30...50
2922351116021
61.114.10
65 20 43
0...60
2922061116021
61.114.15

0...100
2922101116021
61.114.20
65 20 46
0...120
2922121116021
61.114.25

0...160
2922161116021
61.114.30
65 20 49
0...250
2922251116021


0...300
2922301216021
61.114.40
65 20 55
0...600
2922601216022
61.114.45
65 20 64
CONTENTS
-7-
SIKA Thermometer Type 292 B, angle 90° ∢
•
•
•
•
Casing 110 x 30 mm
DIN 16181 B
No. 94 654-94 HH
Order code
Range [°C]
-30...50
SIKA
1742351103021
ISSA
IMPA






0...60
1742061103021


0...100
1742101103021
0...120
1742121103021
0...160
1742161103021
0...200
1742201103021
Range [°C]
-30...50
1742351104021


0...60
1742061104021
0...100
1742101104021
0...120
1742121104021
0...160
1742161104021
0...200
1742201104021
Range [°C]
-30...50
1742351106321
61.112.07

0...60
1742061106321
61.112.13

0...100
1742101106321
61.112.19
65 19 83
0...120
1742121106321
61.112.25
0...160
1742161106321
61.112.31


0...200
1742201106321

65 19 88
Range [°C]
-30...50
1742351110021
61.112.08

0...60
1742061110021
61.112.14

0...100
1742101110021
61.112.20
65 19 84
0...120
1742121110021
61.112.26
0...160
1742161110021
61.112.32


0...200
1742201110021

65 19 89
Range [°C]
-30...50
1742351116021
61.112.09

0...60
1742061116021
61.112.15

0...100
1742101116021
61.112.21
65 19 85
0...120
1742121116021
61.112.27
0...160
1742161116021
61.112.33


0...200
1742201116021

65 19 90

65 19 81


65 19 86

65 19 82





65 19 87
Also available with connection threads: ¾ BSP, M 20x1.5, M 27x2, ½“NPT
CONTENTS
-8-
•
•
•
•
Casing 110 x 30 mm
DIN 16182 B
No. 94 654-94 HH
Order code
Range [°C]
-30...50
SIKA
1752351103021
0...60
1752061103021
ISSA
IMPA








0...100
1752101103021
0...120
1752121103021
65 20 81
0...160
1752161103021
0...200
1752201103021
Range [°C]
-30...50
1752351104021
61.115.06

0...60
1752061104021
61.115.11

0...100
1752101104021
61.115.16
65 20 82
0...120
1752121104021
61.115.21
0...160
1752161104021
61.115.26


0...200
1752201104021

65 20 87
Range [°C]
-30...50
1752351106321
61.115.08

0...60
1752061106321
61.115.13

0...100
1752101106321
61.115.18
65 20 83
0...120
1752121106321
61.115.23
0...160
1752161106321
61.115.28


0...200
1752201106321

65 20 88
Range [°C]
-30...50
1752351110021
61.115.09



65 20 86
0...60
1752061110021
61.115.14

0...100
1752101110021
61.115.19
65 20 84
0...120
1752121110021
61.115.24
0...160
1752161110021
61.115.29


0...200
1752201110021

65 20 89
Range [°C]
-30...50
1752351116021
61.115.10

0...60
1752061116021
61.115.15

0...100
1752101116021
61.115.20
65 20 85
0...120
1752121116021
61.115.25
0...160
1752161116021
61.115.30


0...200
1752201116021

65 20 90
CONTENTS
-9-
SIKA Thermometer Type 175 B, angle 90° ∢
SIKA Glass Inserts for replacement
SIKA Glass Inserts for Thermometers
SIKA Order code
Thermometer type
straight
angle 90°
Please notice:
The required order specification is
printed on the backside of the insert
174
291
271
175
292
272
Immersion tube
Type B
Measuring ranges
-30...50 °C =
0...60 °C =
0...100 °C =
0...120 °C =
0...160 °C =
0...200 °C =
0...250 °C =
0...300 °C =
0...600 °C =
2
35
06
10
12
16
20
25
30
60
Scale
Celsius (°C)
Celsius + Fahrenheit (°C + °F)
Filling
Standard fluid for ranges up to 250 °C
Mercury for ranges above 250 °C
1
2
Fü =
HG =
Immersion tube length
Immersion length l1 in mm
(according to complete thermometers)
for types B with fixed male connection thread
1
2
030
040
063
100
160
250
Spare glass inserts include required
all mounting parts.
Quality by Tradition - Made in Germany
Since 1901 we at SIKA - Dr. Siebert and Kühn have
been producing precision measuring and control
instruments. Mechanical parts as well as glass inserts
of our standard types are produced in automated
manufacturing processes. However, the glass inserts
of special versions, e. g. high temperature versions
are still manufactured by our glassblowers in traditional
handcraft.
Thanks to our long year experience and proven
manufacturing processes in Germany, we are in the
position to guarantee best quality. SIKA thermometers
meet highest demands in precision as well as in
mechanical stability. Original SIKA thermometers simply
last longer than most others.
CONTENTS
-10-
Diesel Engine
Protection Tubes
As an accessory to the Diesel Engine Thermometer
L (U1+42)
42
Protection tubes are applied to protect thermometer immersion tubes against difficult chemical and / or
mechanical process conditions. Furthermore it is far
easier to dismount a thermometer e.g. for repair or other
reasons when a protection tube remains at the measuring point.
SIKA ZVFG protection tubes with integrated compression fitting have been developed as a solution for
Diesel engine dial thermometers. They are machined
from solid material; their integrated compression fitting
minimises the risk of breakage during operation.
SW 22
U1
G 1/2
d1
d2
SW 27
Order code
SIKA Order code
Order code starting with
ZVFG
Mounting length [U1]
100 mm
135 mm
160 mm
200 mm
250 mm
300 mm
100
135
160
200
250
300
Thread Size
½ BSP
¾ BSP
2
3
Material
1.4571 Stainless Steel
3
Thermometer
immersion tube
Ø 12 mm
Ø 13 mm
4
6
Male thread
M
Please ask for customised specifications
CONTENTS
-11-
Diesel Engine Thermometers
Direct Mount Dial Thermometers
This range of instruments includes special precision dial
thermometers optimised for marine engines, based on
the nitrogen gas expansion principle.
Typical Applications
•
•
•
•
Cooling water
Turbo charged air
Lubricating oil
Exhaust gas
Diesel Engine Thermometers - Quality lasts longer
A problem to all Diesel engines is vibration, which
reduces the life time of mechanical thermometers.
SIKA has overcome this problem with their Diesel
engine thermometer. This thermometer has a special
mechanical sensor design, optimised for the use at
marine engines. Furthermore, the case contains a shock
absorbing liquid of high viscosity, which protects the
internal meter movement against heavy vibration and
at the same time lubricates internal parts and avoids
corrosion. SIKA Diesel Engine Thermometers therefore
last longer than many others.
Technical data
0...100 °C
0...120 °C
0...160 °C
0...250 °C
50...650 °C
Measuring range
Double scale °C and °F available
Casing
Ø 80 or 100 mm stainless steel 1.4301
Dial
Silver coloured, black markings
System
Nitrogen filled system
Immersion tube
Stainless steel
Standard dimension lengths “DL“ in mm
100, 135, 160, 200, 250, 300, 400
Thread connection
Adjustable compression fitting
Thread size
½ BSP, ¾ BSP
Accuracy
Class 1.0, Limits of error acc. DIN EN 13190
Approval
Approved by Germanischer Lloyd, Certificate No. 12 026-98 HH
CONTENTS
-12-
rear connection
Z1372 / Z8372
bottom connection
Z1312 / Z8312
b
s
SW
i
45
DL
i
øD
ET
w
øD1
øD
45
SW
G
ø12
øD 1
a
h2
ET
h1
DL
G
w
NG
a
b
D
D1
h1
h2
s
w
80
15
45
79
86
34
36
10
18
100
15
45
99
108
34
36
10
18
Order code
SIKA Order code
ISSA-Code
Type (case diameter)
80 mm
100 mm
Case configuration
Bottom connection
Rear connection
External thread
male
12
72
M
Dial
Thermometer
Temperature range
0...100 °C
0...120 °C
0...160 °C
0...200 °C
0...250 °C
50...650 °C
Temperature unit
°C
Mounting length DL
100 mm
135 mm
160 mm
200 mm
250 mm
300 mm
400 mm
Thread size
10
12
16
20
25
56
61.125.01
61.125.17
65 25
(general
number)
1
100
135
160
200
250
300
400
½ BSP
¾ BSP
Exhaust Gas
Thermometer
61.126.01
61.126.28
2
3
Adjustable compression fitting, steel
Immersion tube
IMPA-Code
Z83
Z13
2
Ø 12 mm, stainless steel
When ordering standard types, please use the order numbers. If changes, e.g. in ranges, immersion tube materials, immersion lengths or
connections are required, they have to be specified in your order.
CONTENTS
-13-
Dimensions
Remote reading Dial Thermometers
SIKA remote reading Diesel engine thermometers are
based on the same system as our well-known direct
mount thermometers. These instruments are available
adapted to the customers present needs with any of
the optional accessories: wall bracket, rear flange or
U-clamp for panel mounting.
Typical Applications
• Cooling water
• Turbo charged air
• Lubricating oil
• Exhaust gas
Remote Diesel Engine Thermometer
The remote reading versions are of the same
mechanical sensor design as the direct mount thermometers. The case is filled with a shock absorbing liquid of
high viscosity. Furthermore, the capillary line is protected
by a stable stainless steel spiral protection.
SIKA remote Diesel Engine Thermometers – vibration
optimised quality for rough environments, ideal for the
use at marine Diesel engines.
Technical data
0...100 °C
0...120 °C
0...160 °C
0...250 °C
50...650 °C
Display range
Dual scale °C and °F available
Casing
Ø 80 or 100 mm stainless steel 1.4301
Dial
Silver coloured, black markings
System
Nitrogen filled system
Immersion tube
Stainless steel
Standard dimension lengths “DL“ in mm
100, 135, 160, 200, 250, 300, 400
Thread connection
Adjustable compression fitting
Thread size
Accuracy
Approval
½ BSP, ¾ BSP
Class 1.0, Limits of error acc. DIN EN 13190
Approved by Germanischer Lloyd Certificate No. 12 027-98 HH
CONTENTS
-14-
øD1
d1
b
b1
s
a1
s
øD1
SW
øD1
øD
øD
s1
SW
i
SW
d3
i
G
ET
ø12
DL
G
DL
ET
DL
G
ø12
ø12
Type 311
with wall bracket
Type 331
U-clamp for panel mounting
Type 321
with rear flange for panel mounting
NG
a1
b1
D
D1
d1
d2
d3
s
s1
80
18
48
79
86
95
110
4,8
10
6
100
18.5
49
99
108
116
132
4,8
10
6
Order code
SIKA Order code
ISSA-Code
Type
311
321
331
Case diameter
80 mm
100 mm
Temperature range
0...100 °C
0...120 °C
0...160 °C
0...250 °C
50...650 °C
Mounting length DL
135 mm
160 mm
200 mm
250 mm
300 mm
400 mm
B2
C2
10
12
16
25
56
only
Exhaust Gas
Thermometer
135
160
200
250
300
400
Adjustable
compression fitting
Thread size
IMPA-Code
Z311
Z321
Z331
61.129.01
61.129.13
65 25
(general
number)
9
½ BSP
¾ BSP
Immersion tube
Ø 12 mm, stainless steel
Capillary line
1m
3m
5m
Capillary material
stainless steel, spiral protection
2
3
2
1
3
5
C
When ordering standard types, please use the order numbers. If changes, e.g. in ranges, immersion tube materials, immersion lengths or
connections are required, they have to be specified in your order.
CONTENTS
-15-
Dimensions
Pressure Gauges
SIKA-Pressure Gauges, Type MRE-M
SIKA Pressure gauges are Bourdon type quality
gauges, manufactured according to EN 837-1. They are
available in three different case sizes, as direct mount
versions, with optional mounting flange or as a U-clamp
panel mounting version. SIKA offers different measuring
ranges starting from -0.6 up to 1600 bar.
These gauges can be used for any gaseous media or
low viscous fluid that does not corrode the brass parts.
Their special mechanical design and case filling provide
best properties for the use in marine applications.
•
•
•
•
•
•
•
Crimped on ring case, stainless steel 1.4301
Case diameter 63, 80 and 100 mm
Filled with glycerine
Bottom or rear connection
Connection thread: ½“ BSP (¼“ BSP for 63 mm), brass
Optional with mounting flange or U-clamp
Accuracy
- class 1 for case diameter 80 and 100 mm
- class 1.6 for case diameter 63 mm
• GL available on request
case filling
instrument glass
robust case
bottom connection direct mounting
CONTENTS
-16-
bottom connection with back flange
rear connection direct mounting
rear connection with front flange
rear connection with U-clamp fixing
CONTENTS
-17-
Dimensions
bottom connection direct mounting
bottom connection with back flange
rear connection direct mounting
rear connection with front flange
rear connection with U-clamp fixing
CONTENTS
-18-
NG
D
D1
a
63
62
67
12.5 15.5 35
80
79
86
16
100 99
106 20
a1
21
b
44
23.5 55
b1
b2
c c1 c2
d1
d2
d3
e
G
g
h
s
36
38
5 2
13
75
85
3.7
-
¼ BSP
58
54
8,5 5
38.5 46
6 3
20
95
110 4.8
-
½ BSP
82
76
9
5
1
6
22
58.5 6 3
20
116 132 4.8
30 ½ BSP
97
87
10
6
1
6
22
55
SIKA Order code
s1 s2 s3
ISSA-Code
1
SW
4.5 14
IMPA-Code
MREM
Dial size
63 mm
80 mm
100 mm
Bottom connection
Bottom connection
Rear connection
Rear connection
¼ BSP (63 mm)
½ BSP (80 mm / 100 mm)
¼ BSP (63 mm)
½ BSP (80 mm / 100 mm)
Material thread
connection
brass
stainless steel (for 1000 / 1600 bar , only)
Measuring range [bar]
- 0.6...0
-1...0
-1...0.6
-1...1.5
-1...3
-1...5
-1...9
-1...15
0...0.6
0...1
0...1.6
0...2.5
0...4
0...6
0...10
0...16
0...25
0...40
0...60
0...100
0...160
0...250
0...400
0...600
0...1000* (only 100 mm dial size)
0...1600* (only 100 mm dial size)
Bottom connection
1
2
3
1
1
5
2
1
3
305
315
505
515
525
535
545
555
015
025
035
045
055
065
075
085
095
105
115
125
135
145
155
165
175
185
61.232.10
61.232.15
direct mounting
back flange
00
10
direct mounting
front flange
U-clamp fixing
00
20
30
65 15
(general
number)
Rear connection
Case filling
glycerine
G
* with stainless steel bourdon springed connection
Please ask for customised specifications.
CONTENTS
-19-
Dimensions and order code
Your Personal Notes
CONTENTS
-20-
Electronic Monitoring Systems
and Temperature Sensors
CONTENTS
-21-
Electronic Digital Thermometer
SolarTemp Marine Type 850 with Mounting Plate
•
•
•
•
•
Display suitable for sensor elements Pt1000
Type of protection IP65
Measuring range
0...650 °C
Optional
transmitter output 4...20mA
Selection of temperature sensors for SolarTemp
Marine Type 850 is located on page 24
Technical data
Ambient temperature
-20...60 °C (case)
Case
170 x 150 mm,
steel case blue powder-coated,
aluminium mounting plate
Power supply
Solar cell
Light density
Min. 50 Lux
Digital display
4 digit, 7 segment display,
25.4 mm high
Approved by several classification societies
Order code
Type
Range
SIKA Order code
Standard
version
0...650°C
85065P54
Transmitter
version
4...20 mA
≙ 0...600 °C
85065P53360
Transmitter
version
4...20 mA
≙ 0...300 °C
85065P53330
SolarTemp applications
SolarTemp type approval certificates
•
• DNV
• ABS
• LR
• ClassNK Nippon
• BV
• Korean R.
CONTENTS
-22-
Temperature Sensors
Temperature sensors for marine applications
Electrical Measuring Instruments
Temperature measurement in marine applications makes
high demands on sensor reliability. Standard temperature
sensors not specifically designed for this application will
not last long time in this environment. Especially sensors
used on diesel engines and propulsion systems are
subject to severe vibration with acceleration as high as
200 g in some cases as well as occasional exposure
to water and oil. SIKA has long-term experience in
manufacturing products for the marine industry and
together with engine builders and end users has
developed a wide range of temperature sensors suitable
for this harsh environment.
Rugged design, vibration resistant components and
reliable manufacturing give SIKA sensors a long lifetime
also under difficult conditions. For quality assurance each
sensor is thoroughly tested during and after production.
The quality management system installed by SIKA
guarantees a constant and reliable performance of the
products.
Due to the high flexibility of SIKA, sensors in many
common designs are available. Special sensors can be
manufactured on request
Important calibration instructions
Temperature sensors may be subject to changes in
accuracy during their lifetime. A periodic calibration of
your temperature sensors is required to make sure that
they display always a correct temperature value. We
provide you with the relevant calibration tools. Please see
selection of Test & Calibration products on page 37.
SIKA temperature sensors ...
• for exhaust gas temperature measurement
• for cooling water temperature measurement
• for oil temperature measurement
Approvals
• Most sensors are approved by Germanischer Lloyd
• Additional approvals on request
Temperature Sensors approval certificates
•
• DNV
• ABS
• BV
• ClassNK Nippon
• RINA
CONTENTS
-23-
For SolarTemp Marine Type 850
Transmitter and Sensor Cables
Head form B
app. 121l
Sensor Cable (connection head to indicator)
Length*
SIKA Order Code
3m
WKS8203000F
5m
WKS8205000F
10 m
WKS8210000F
15 m
WKS8215000F
Cu seal
Sensor Cable (connection indicator to remote control)
Fig. A
Fig. B
Length*
SIKA Order Code
10 m
WKB8210000F
15 m
WKB8215000F
* other lengths available on request
Type
SIKA Order code
Resistance thermometer
Diameter
ISSA-Code IMPA-Code
W
14/17 mm conical (Fig. B)
(U1= 100 mm or 150 mm)
14
17/23 mm conical (Fig. A)
(U1= 100 mm or 150 mm)
17
20/23 mm conical (Fig. A)
(U1= 200 mm)
20
Material
stainless steel 1.4571
Sensor element
2 x Pt1000 (only for transmitter version)
1 x Pt1000
Immersion
tube length U1
100 mm
150 mm
200 mm
Measuring insert
demountable
Electrical
connection
plug M 12x1 (Fig. B)
head form B (Fig. A)
Cable
Teflon FEP shielded (only plug M 12x1) (Fig. B)
without cable (only Head B) (Fig. A)
Mechanical
connection
½ BSP
¾ BSP
thread M 33x2
Length of
sensor cable
(only plug M 12x1)
2m
3m
5m
3
P53
P54
61.122.00
61.122.09
100
150
200
65 18 55
65 18 58
2
3
B
5
0
2
3
F
03
05
09
CONTENTS
-24-
For exhaust gas temperature measurement
• Accuracy class
Resistance thermometer class B
Thermocouple
class 1
Head form B
app. 121l
• Measuring insert is demountable
• Diameter (acc. immersion tube length)
17/23 mm concial (U1= 100 mm or 150 mm)
20/23 mm concial (U1= 200 mm)
• Type of protection IP54
• Max. temperature 600 °C
• Process connection with fixed thread connection
• Electrical connection
Head form B of aluminium die casting, silver finish
Cu seal
• Max. ambient temperature 200 °C
• Approval
Germanischer Lloyd, GL
Type
SIKA Order code
Diameter F
17/23 mm conical (U1= 100 mm or 150 mm)
20/23 mm conical (U1= 200 mm)
Material
Sensor
element
1 x Pt100 3-wire / class B
1 x NiCr-Ni (type K)
Immersion
tube length U1
100 mm
150 mm
200 mm
Measuring
insert
demountable
Electrical
connection
head form B with ceramic socket
head form B with transmitter
Process
connection E
¾ BSP
M 27x2
M 33x2
ISSA-Code IMPA-Code
W
T
Thermocouple
17
20
3
P31
1TK
61.116.00
(general
number)
100
150
200
65 25 22
(general
number)
2
B0
BT
3T6
HT6
FT6
CONTENTS
-25-
Cable sensors for exhaust gas temperature measurement
LK
• Accuracy class
Thermocouple
class 1
LK
• Measuring insert is not demountable
32
• Diameter 8 mm or 12 mm
• Type of protection IP54
36
LK
G1 /2A
M12x1
Ø 12
50
U1
• Process connection
without or with compression fitting
G1 /2A
Length
Length
10
• Max. temperature
600 °C for resistance thermometer and
800 °C for thermocouple
Compensation cable, wire-braided
Ø 5,5
• Approval
Germanischer Lloyd, GL (only for type TWE)
T55
Type
Ø 9,5
Ø8
T95
TVA
SIKA Order code
Diameter
5.5 mm
9.5 mm
8 mm
12 mm
Material
Sensor
element
1 x NiCr-Ni (type K)
2 x NiCr-Ni (type K) for type TVA / T95
1 x Pt100 3-wire / class B (only Ø 12 mm)
1 x NiCr-Ni (type K) (for T55 / T95)
2 x NiCr-Ni (type K) (for T55 / T95)
Length
100 mm
150 mm
175 mm
200 mm
250 mm
1500 mm (only for T55)
200 mm without demountable insert* (only for T95)
Ø9
TWE
ISSA-Code IMPA-Code
T55
T95
TVA
TWE
type T55 / T95
type TVA / TWE
Electrical
connection
FEP cable, wire-braided
fibre glass, wire-braided
mineral insulated cable
Cannon plug (for T55)
Process
connection
without
clamp coupling steel, galvanized ¼ BSP
clamp coupling steel, galvanized ½ BSP
clamp coupling steel, M 12x1 (for T55)
3
C
K11
K12
P31
1TK
2TK
0100
0150
0175
0200
0250
1500
2000**
61.116.00
61.116.13
65 25 21
65 25 26
07
08
09
0
I
K
R
Cable length LK without cable (only for T55)
1.0 m
1.5 m
2.0 m
3.0 m
00
01
02
03
05
* demountable insert available on request
** please consider the difference in the order code for type T95. All other lengths are also available on request
CONTENTS
-26-
For cooling water temperature measurement
• Accuracy class
Head form B
app. 121
• Measuring insert is demountable
• Diameter 8 mm, 12 mm or 14 mm
• Type of protection
- IP65 (Fig. A)
- IP54 (Fig. B)
SW24
SW27
Cu seal
• Max. temperature 200 °C
L1
• Process connection with fixed thread connection
Head form B made of aluminium die casting
and silver finish or
Cable socket angle type type Form A
• Approval
Germanischer Lloyd, GL (only for Fig. A)
ØF
Fig. A
Type
SIKA Order code
Diameter F
Fig. B
8 mm (Fig. A)
12 mm (Fig. B)
14 mm (Fig. B)
Material
Sensor element
1 x Pt100 3-wire / class B
2 x Pt100 3-wire / class B (Fig. B)
Immersion
tube length U1
80 mm
100 mm
120 mm
150 mm
200 mm
08
12
14
3
P31
P32
080
100
120
150
200
Measuring insert demountable
Electrical
connection
head form B with ceramic socket (Fig. B)
head form B with transmitter* (Fig. B)
angle type Form A (Fig. A)
Process
connection E
½ BSP (Fig B)
¾ BSP (Fig. B)
M 27x2 (Fig. B)
M 33x2 (Fig. B)
½ BSP (Fig A)
M 18x1,5 (Fig. A)
M 20x1,5 (Fig. A)
M 33x2 (Fig. A)
ISSA-Code IMPA-Code
W
61.116.00
61.116.13
2
65 25 21
65 25 26
B0
BT
10
2T2
3T2
HT2
FT2
2GL
6GL
NGL
3GL
* For this please ask us for our transmitter catalogue.
CONTENTS
-27-
Cu seal
• DIN 43772
KombiTemp®
Temperature Sensors with local display
Technical data
Type
K 122
length
width
K 422
K 522
die cast aluminium,
gold-coloured anodised
Housing
150 mm
36 mm
110 mm
30 mm
110 mm
30 mm
special glass prismatic
approx. 6 mm diameter,
with black burnt-in scale,
blue thermometer filling
Thermometer
capillaries
Immersion
tube
diameter 10 x 1 mm
Electrical
Connection
cable socket angle type, Form A
Immersion
tube material
brass, up to PN 16 bar
st. steel, up to PN 40 bar
Design
straight,
fixed thread connection
K 122
angle type
90° ∢,
fixed thread
connection
K 422
K 522
Type
SIKA Order code
K 122
K 422
K 522
ISSA-Code
IMPA-Code
K122
K422
K522
Temperature range
-30...50 °C
0...60 °C
0...100 °C
0...120 °C
0...160 °C
0...200 °C
Immersion tube
length
63 mm
100 mm
160 mm
35
06
10
12
16
20
063
100
160
Mechanical connection ½ BSP


2
7
M 20 x 1.5
Immersion
tube material
brass (2.0321, for pressure up to 16 bar)
stainless steel (1.4571, for pressure up to 40 bar)
Electrical
temperature sensors
1x Pt100 / 3-wire
1x Pt1000 / 2-wire
Scale
°C
°C and °F
1
3
1
7
0
2
CONTENTS
-28-
CargoTemp Roller
More safety by manual temperature monitoring of bulk cargo
Why is temperature monitoring important?
Many products are self-heating and/or self-igniting as
bulk cargo. This autonomous process may lead to the
cargo destroying itself, if measures to counteract are not
taken in time.
• Raw materials such as tobacco, cocoa,
cotton and jute
• oleiferous goods such as seeds and nuts
• all products that can be grouped under the umbrella
term „oil cake“, such as expeller, pellets and
extractions, as well as
• aluminium powder, ores and coals
As a basic principle, all goods falling under the IMDG
Code, chapter 2.4 class 4.2, should be temperature
monitored, in order to detect the incipient self-heating
process in time.
Mobile temperature monitoring in your cargo holds!
• Easy to handle
• Cable with depth indication
• Large integrated LC display
• Comes in a sturdy plastic suitcase
Technical Data
Measurement Input
Pt1000 / 2-wire
Cable length
35 m
Cable design
temperature proofed, braided FEP cable,
with 6 marks every 5 meters for depth indication, tension = 50 N
Measuring probe
length = 100 mm, Ø = 20 mm, weight = 200 g
Measurement input
Pt1000 / 2-wire
Measuring range
-40.0...150.0 °C
Resolution
0.1 °C
Accuracy
±0.5 % FS ±1 digit
Display
3 ½ digit LCD, 18 mm high
Measuring rate
3 sec.
Power supply
maintenance-free battery
Battery life time
approx. 10 years
Housing
robust PP-plastic, blue/black, with handle
Housing size
Ø approx. 210 mm, depth approx. 95 mm, handle approx. 45 mm
Protection class
IP40
Accessories
portable ABS-plastic case with foam inlay
case dimensions 394 x 294 x 106 mm
Weight
approx. 2 kg incl. case
SIKA Order code
ETCTP000350004
CONTENTS
-29-
Which products are affected?
Display and Monitoring Systems
Centralised data collection with EB 3000
The EB system is an easy to use cost effective way to
interface distributed measuring points to a central display
unit. The connection to a monitoring system or a PC is
possible for logging the data. Up to 240 sensors on a total
bus length of up to 1000 m can be installed. The cabling
can be made either in a bus, star or tree design and thus
allows great flexibility of the system. The EB system is
mainly used for temperature measurement; many components for other applications are available on request
Application area
• Cargo hold monitoring for bulkcarriers, especially if
heat sensitive goods are carried for example rice,
cereals, carbon and wood.
• Monitoring of self heating or self igniting bulk cargo as
“oil cake” cargos, cotton, jute, ores…
• Other applications where more than one sensor is
required for measuring, controlling, monitoring or
recording.
Technical features
•
•
•
•
•
•
•
•
•
•
•
•
Connection of up to 240 sensors possible
Total bus length of up to 1000 m
Polarity-free 2-wire system in bus, star or tree design
Bi-directional exchange of information
Polarity-free and short-circuit proof sensor module
Supply of the sensor via bus cable
All bus functions are maintained even in case of
sensor module failure
Fully automatic start-up installation via software is
possible
New sensor modules will be automatically detected
During operation sensor modules may be changed,
removed or added
Scan time approx. 55 ms for each sensor module
CRC check ensures very high transmission reliability
Technical Data
Inputs
20 + 2 virtual channels
Display
1 line, 4 digit 7 segment LED,
red 13mm high
Channel display
2-digit, 7-segment LED,
7 mm high, red
Status display
11 LED
Relay output
4 x SPST, 5 A / 2 A / 250 VAC
and
1 x SPDT, 5 A / 2 A / 250 VAC
Serial interface
EB interface
Protection class
IP65 (front)
Dimensions
96 x 48 x 100 mm (W x H x D)
Power supply
230 VAC, 50/60 Hz (standard)
12 VAC, 50/60 Hz (optional)
SIKA Order code
EME8EB30000000 (230 VAC)
CONTENTS
-30-
Sensor Modules for temperature
Technical data
Pt1000 / 2-wire, potential-free
Temperature
range
-30.0...100.0 °C Standard
-50.0...400.0 °C with extension tube
-50...500.0 °C with extension
Accuracy
±0.2 % of reading ±0.2 °C
Cable
PVC, length 1 m
Immersion tube
material
Stainless
steel 1.4571
T pe EBT
Type
EBT-IF1
IF1
(Standard, D = 6 mm, L = 100 mm)
Type
EBT-IF2
Ty
ype E
BT-IF2
(Standard, D = 6 mm, L = 100 mm,
½ BSP, without extension tube)
Sensor type
SIKA Order code
Type EBT-IF1
EME8EBTIF10000
Type EBT-IF2
EME8EBTIF20000
Type EBT-IF3
EME8EBTIF30000
Type
T
Typ
ype EBT
EBT-IF3
IF3
(Standard, D = 6 mm, L = 50 mm,
½ BSP, with extension tube 100 mm)
Application example for hold monitoring
CONTENTS
-31-
Alarm Retrofit Set
37,8
75
75
110
Advantages at a glance
• Universally retrofittable at a reasonable price
• Unlimited number of measuring points
• Easy to install with on-board equipment
• Bus system to transfer data
362,1
124,9
The SIKA exhaust gas temperature Retrofit Set is
suitable for all auxiliary Diesel engine types. Installation
with on-board equipment is possible without problems.
The integrated bus system sends the temperature values
of each cylinder through an easy-to-install cable to the
control room. The display fitted there sends the temperature values on to the ship‘s control system and will sound
an alarm if the exhaust gas values are critical. All that is
needed to put together a set are the number of cylinders,
the mechanical dimensions of the sensor and the cable
length.
315
315
Application example for Exhaust Gas Monitoring
Contact us for a customised offer for your engine type.
CONTENTS
-32-
Multi-channel temperature indicator, Series TS 31000
The instruments of the series TS 31000 are 16- or
32-channel temperature measuring instruments for thermocouples. The TS 31000 is operated and programmed
contactless via 2 light reflecting buttons.
The customer specific pre-configuration for 16 applications (e.g. engine types) offers a wide field of use.
The TS 31000 is equipped with a micro controller for the
complete control as well as for the linearisation of the
different types of thermocouples and the cold junction
sensors.
The measured temperature of the selected measuring
point is shown on an easy reading 4-digit LED display.
The customer specific text of the selected measuring
point is indicated on a 2-line LCD matrix display.
The sensors are connected to the TS 31000 by the two
20-pole plug connectors or by 16-channel interchange
modules with flat strip line.
Technical Data
Number of
measuring inputs
16 or 32
Channel selector
Electronic switch
Inputs
TC Type K, E, J, T, S, B or R
Display
Measured value display:
4-digit LED
text display:
2-line alphanumeric LCD
Supply voltage
24 VDC (standard)
Supply voltage
optional with
external power supply
115 VAC, 50 / 60 Hz
230, VAC; 50 / 60 Hz
250, VAC; 50 / 60 Hz
Housing
96 x 96 x 75 mm
Interchange module for 16 channels with
32 screwclamps (sensor inputs).
Output: 20 pole plug connector (picture similar)
CONTENTS
-33-
Your Personal Notes
CONTENTS
-34-
SIKA Test and Calibration
Equipment
CONTENTS
-35-
Temperature Calibrators
Temperature Calibrators series TP 17 000 M
SOLAS ISM regulation
For inspection of
In 1998, the International Safety Management (ISM)
code was adopted by IMO and became mandatory on
certain ocean going vessels. In 2002 the Safety Of Life At
Sea (SOLAS), Chapter IX and the ISM code applies to all
ships. Our calibration equipment (temperature calibrators
and pressure calibrators) will enable ship owners and
marine engineers to comply with the SOLAS regulation
for maintenance standards. We advice a recalibration of
the calibrator with a cycle between 1 and 2 years depending on strain.
The recalibration comprises:
Thermometers/SIKA thermometers
Inspection is performed by comparison of the temperature
measured by the test piece and the block temperature
indicated by the calibrator / calibration bath.
• On board:
SIKA Recalibration Set see page 40
• SIKA in house:
Calibrator adjustment (only made by SIKA DKD
laboratory) with output certificate
Economic and safe!
Exact temperature measurement and monitoring are
“musts” in applications crucial to operational safety of
machinery and industrial installations.
Regular inspection of the temperature sensors used in
these applications is essential for economic and technical
safety reasons and is already prescribed as obligatory in
many sectors.
The temperature calibrators and calibration bath are
already a part of the standard equipment of the technician in the above listed sectors. These compact devices
are easy to transport and easy to operate and have all
performance features required for “in-situ inspection”.
Temperature switches/thermostats
The test piece is inserted into the block and connected
to the external transducer. The switch setting respective
to the switch point is signalled by reached temperature.
Resistance thermometers and thermocouples
The inspection is performed by comparison of the
temperature indicated on the external measuring
instrument with the reference temperature of the calibrator
or calibration bath.
Description
The calibrators of series TP 17 000 M contain an electrically controlled metal block with a bore for the insertion of
the test piece. Adapter sleeves are used for test pieces
with smaller diameter. The block is mounted in a heat
insulated housing.
The complete electronic is located in the front of the
calibrator. The required temperature is easily set on the
digital controller.
The current temperature will automatically be adjusted
to the set value. The current temperature and set
temperature are constantly shown on the 2-line, 4-digit,
7-segment LED display.
For Calibration of indicators and loops, multifunction and
pocket calibrators are available on page 49.
metal block
test piece fixtures
handle
display of
current and set temperature
control elements
switch ON/OFF
with fuse and
power supply connection
CONTENTS
-36-
Technical data and Order code
Device type
TP 17 165 M
TP 17 650 M
-35 °C up to 165 °C
Ambient temp. up to 650 °C
Digital PID controller, automatic fine adjustment
with softstart for fan
Block temperature control
Tolerance
±1 °C
±1 °C
Stability
± 0.1 °C
Block temperature display
4-digit, 2-line, 7-segment LED, 7 mm high, red and green
Display range
-50.0 °C up to 165.0 °C
Resolution
0.0 °C up to 650.0 °C
1 °C
Test piece fixture
Block material
Aluminium
Brass
Block bore
Ø 28 mm
Ø 28 mm
Block depth
150 mm
Adapter sleeves
Inside diameter
between 1.5 mm and 25 mm
in steps of 0.5 mm
Inside diameter
between 1.5 mm and 25 mm
in steps of 0.5 mm
90...240 VAC, 50/60 Hz
230 VAC, ±10 %, 50/60 Hz
General data
Power supply
Power consumption
Dimensions L x W x H
approx. 400 VA
approx. 1000 VA
approx. 210 x 380 + 50 x 300 mm
approx. 150 x 330 + 70 x 270 mm
approx. 10.0 kg
approx. 7.5 kg
Aluminium transport case
Aluminium transport case, nylon service case

115 VAC, ±10 %, 50/60 Hz
Weight
Options
Accessories
Power supply
Certificates
DKD-Certificates (acc. guidline DKD-R5-4), SIKA certificate
Engineering unit
Display of temperature in °F
Order codes
SIKA Order code
EP17165M281500
EP17650M281500
ISSA-Code
61.187.01
61.187.21
IMPA-Code
65 25 03
65 25 05
CONTENTS
-37-
Test & Calibration Equipment
Temperature range
Pressure Calibrators
Precision Pressure Calibrator, Series PM
Pneumatic and hydraulic pressure calibrators of series
PM distinguish themselves especially by high accuracy of measurement and compact type of construction.
Reference pressures of -1 up to 1000 bar can be generated in a fast and simple way. Exact adjustment of
the desired pressure is carried out by a precision adjustment valve. The reference pressure is indicated via
an analogue precision pressure gauge or a digital LCD.
The instruments under test are connected to the pressure output of the calibrators by a pressure hose and
an adapter. For rough use on the spot the calibrators
can be supplied in protection class IP68. Power is supplied by batteries or rechargable accumulators. The automatic measuring range switch of the PM series grants
an optimal resolution with any application. Different
measurement units can be selected by pressing a function key.
Technical Data
Type
P 40.2
P 60
Pressure Medium
P 700.1
air
Pressure Range
Vacuum -0.95 bar
Pressure 40 bar
Pressure connection
- References
- Device under test
P 1000.1
pure water or hydraulic oil
Vacuum -0.95 bar
Pressure 60 bar
with pure water 0...400 bar
with hydraulic oil 0...700 bar
with pure water 0...400 bar
with hydraulic oil 0...1000 bar
⅜ BSP female
¼ BSP with quick-coupling and
pressure hose (1 m)
¼ BSP
¼ BSP with quick-coupling and
pressure hose (1 m)
Adapter set
⅛ BSP, ¼ BSP, ⅜ BSP, ½ BSP,
NPT ⅛, NPT ¼, NPT ½
M 12x1.5, M 20x1.5 and ⅛ BSP male, ¼ BSP male
Set of seals
flat seals (FEP) and O-rings
Dimensions
- Pump with
pressure hose
- Pump with
accessories in case
approx. 240 x 170 x 50 mm
approx. 236 x 159 x 70 mm
approx. 450 x 370 x 110 mm
approx. 360 x 320 x 130 mm
approx. 1.1 kg
approx. 1.8 kg
approx. 4.2 kg
approx. 4.8 kg
Weight
- Pump with
pressure hose
- Pump with
accessories in case
P40.2 / P 60
P 700.1 / P 1000.1
CONTENTS
-38-
Combinations
Reference E
Reference D
(0.5% FS / Range: 0...350 bar)
P 40.2
PM 40.2 E
(40 bar) 0.5 % FS
PM 40.2 D
(40 bar) 0.1 % FS

PM 60 D
(60 bar) 0.1 % FS
PM 700.1 E
(350 bar) 0.5 % FS
(350 bar) 0.1 % FS
P 60
P 700.1
(0.1% FS / Range: 0...1000bar)
P 1000.1
PM 700.1 D
(700 bar) 0.1 % FS
PM 1000.1 D

(1000 bar) 0.1 % FS
All hand-held pressure pumps and reference gauges can be combined for different measuring ranges,
resolutions and accuracy classes, as outlined above.
EXI-Version optional
Order code
Type
SIKA Order code
ISSA-Code
IMPA-Code
Pressure pumps
P 40.2 (pneumatic)
EPPM0400BL0000
P 60 (pneumatic)
EPPM0600BL0000
P 700.1 (hydraulic)
EME8P700100000
P 1000.1 (hydraulic)
EME8P100010000

65 15 84
65 15 91


References
E (40)
Measuring range -1...40 bar
Resolution 0.01 bar
EME8REF-E-0030
E (350)
Measuring range 0...350 bar
Resolution 0.1 bar
EME8REF-E-0300
D (40)
Resolution 0.01 bar
EME8REF-D-0030
D (60)
Resolution 0.01 bar
EME8REF-D-0060
D (350)
Resolution 0.1 bar
EME8REF-D-0300
D (700)
Resolution 0.2 bar
EME8REF-D-0700
D (1000) Measuring range 0...1000 bar
Resolution 0.2 bar
EME8REF-D-1000
CONTENTS
-39-
►
▼
Recalibration Set
for Temperature and Pressure Calibrators
All your Calibration Equipment always available on board!
With dry block temperature calibrators of the TP 17000 M
series and the pressure calibrators of the PM series, the
vessel have necessary calibrated test equipment according to SOLAS and DNV on board. According to these
regulations the test equipment for temperature and pressure must be recalibrated.
Because of this we are able to offer our SIKA recalibration set. Including a reference thermometer MH 3710
for standard calibration requirements or MH 3750 for
highest accuracy requirements. With the high temperature probe TF650-6-300, you can measure the actual accuracy of the dry block calibrator. For precision pressure
measurement we offer the SIKA pressure reference type
D. We deliver the complete equipment in a robust case
including all necessary certificates.
Benefits
The advantage is that the test equipment doesn´t have to
be returned to SIKA. It can be left on board and the crew
can make the recalibration on their own. Checking the
recalibration set is very easy because only the small case
has to be returned once a year.
Procedures
Recalibration of temperature calibrators is done with
Recalibration Instrument type MH3710 or MH3750 and
Temperature Sensor type TF650-6-300. Recalibration of
Pressure Calibrators is done with Recalibration Instrument type D. Every calibrator has to be calibrated to 4
measuring points. The Recalibration Set measures the
temperatures of the heating block or the pressure of the
pressure calibrator and you have to place the measured
values on record.
Content
Temperature Reference MH
in combination with Temperature Sensor TF
Measuring input:
Pt100
Measuring range:
-50.00...650.0 °C
Resolution up to:
0.1 °C
Miscellaneous:
min./max.-memory,
hold function, auto-off
Pressure Reference Type D
High-precision digital manometer with versatile pressure
measuring instrument.
MH 3710 (Standard-Set)
• Accuracy 0.3% FS
Pressure ranges
•
•
•
•
MH 3750 (Premium-Set)
• integrated alarm and data logger function
• User-specific characteristic curve of sensor
• Real-time clock with day, month and year
• Measured value memory 16200
• Accuracy < ±0.2 °C
μC based with internal EEPROM
piezoresistive pressure transducer
pressure- and temperature tested
min./max.-memory, hold function, auto-off
Accuracy
Temperature range
Protection
-1....40 bar 0.01
0...350 bar 0.1
0...700 bar 0.2
< ±0.1 % FS
0...50 °C
IP65
Sensor TF 650-6-300
High-precision temperature sensor suitable for MH 3710
and MH 3750 long-time temperature stable
Measuring range:
-50...650 °C
Sensor:
stainless steel
tube D = 6 mm, L = 300 mm
Cable / Handle:
PVC cable (1 m) with
4-pin Mini-DIN-plug
CONTENTS
-40-
Certificates
SIKA will issue all necessary certificates so that you are
able to fulfill the official requirements.
Worksprüfsc
Werks
Certifihein
cate
MUSTER
2008-09
Gerät:
Pt100-Widerstandsthermome
ter + Anzeigegerät
Typ:
GTF601+NH3750
Messbereich:
CER
TIF
ICA
TE
0….200 °C
Serien-Nr.:
598865-1 + 598865
Auftrags-Nr.:
Kunde:
of TÜ
Verwendete Normale
und Messeinrichtu
ngen:
DKD-Gebrauchsnormal
Pt100, SN ASL-20,
Kalibrierzeichen
2339 DKD-K-09701/
2008-03
Umgebungsbedingungen:
Umgebungstemperatur:
Rel. Luftfeuchtigkei
t:
Luftdruck:
Messergebnisse:
Anzeige
[°C]
0,00
50,12
100,26
150,39
199,73
Sollwert
[°C]
- 0,003
50,120
100,268
150,364
199,732
Pressure Reference D
bH
7-9
• D-3
462
0 Kau
has
a Qu
fun
Q alit establ
gen
y Ma ished
and
nag
Measu Dev
ement app
elop
pm
rem
Sys lies
ent
ent
for
tem
Tem , Co , Pro
for
ntrol duc
tion
for pera
Ind ature, and Cal and
ust
us
Pre
ry and
ssu ibrationSales
An
re,
aud
of
OEM-A
Flo
it was
w Instru
Pro
of has
pe
perform
ppl and Lev ments
ication
bee
el
ed,
n furn
s
Rep
fu
ort No.
ishe
d
acc
a
700
ordingthat the
036
require
20
are
to
ISO
fulfilled
ments
9
9001
. The
Cer
: 20
tific
08
ate
Reg
istratio
n No.
12 100 2012-0
3-19
751
3 TM
S
RT (23±1)°C
(50±20)%
(990 ± 30)mbar
Abweichung
[°C]
+0,003
±0,000
- 0,008
+0,026
- 0,002
Erstellt durch
Kaufungen, 24.09.2008
Labor Messtechnik
The
V SÜ
Cer
D Ma tific
nag ation
em
Bo
certifie ent Ser dy
vice
s tha
Gm
t
Struth
S
weg
(O. Schilling)
Dr. Siebert & Kühn
GmbH & Co. KG
Telefon: (05605)
· Struthweg 7
803-0 · Telefax:
-9
(05605) 803-54 /
60 ·
·
34260 Kaufungen
Telex: 99717 sika
d
Mun
ich,
Temperature
hand held instrument
MH 3710 / MH 3750
200
QMS
-TGA
-ZM-0
7-92
Temperature Reference Sensor TF650-6-300
Range
Accuracy
Model
SIKA Order code
Standard Recalibration Set
650 °C
0.3% FS
temperature reference sensor
certificate temperature (2 points)
MH 3710
TF650-6-300
40 bar
0.1% FS
pressure reference
certificate pressure (2 points)
Ref D (40)
transport case
GKK3600-RCS
650 °C
0.3% FS
MH 3710
TF650-6-300
700 bar
0.1% FS
pressure reference
Ref D (700)
transport case
GKK3600-RCS
Set 1
Set 2
EME8RCS-SET001
EME8RCS-SET002
Premium Recalibration Set
650 °C
0.03% FS
special linearisation
MH 3750
TF650-6-300
40 bar
0.1% FS
pressure reference
Ref D (40)
transport case
GKK3600-RCS
650 °C
0.03% FS
special linearisation
MH 3750
TF650-6-300
700 bar
0.1% FS
pressure reference
Ref D (700)
transport case
GKK3600-RCS
Set 3
Set 4
EME8RCS-SET003
EME8RCS-SET004
CONTENTS
-41-
Order code
High Pressure Calibration Set
High Pressure Calibration Set P-HP
With the Calibration Set P-HP you are able to check your
mobile hydraulic power units (1) or fuel-injector test rigs
(2). These pneumatically supported high pressure pump
systems can be equipped with different tools and are
used on board for following operations:
•
•
•
•
Setting of injection valves
Assembling / disassembling cylinder cover
Fixing fundament
Creation defined torques
The calibration of built-in pressure gauges allow a
reliable statement about the accuracy and is therefore decisive to the quality of operations. The
connection of digital pressure reference P-HP will be
realized via hose adapter to the pressure output of the
controlling system. The high pressure calibration set
P-HP includes the pressure reference with connection
adapter as well as three high pressure hoses and will be
supplied in a service case.
Accessoires
• Case
• Adapter with quick coupling nipple 2000 bar (male)
• Different high pressure hoses (0.3 m)
with quick coupling
- 1 x red, 2000 bar, female
- 1 x blue, 1500 bar, female
- 1 x blue, 1500 bar, male
Technical data
Display
Multifunction LCD 20 x 60 mm
Pressure range
0...2500 bar
Pressure media
special hydraulic oil
Tolerance
±0.1 % FS ±1 digit
SIKA Order code
EME8AEB23HP2K0
High pressure calibration set applications
• Hydraulic power unit e.g. IOPmarine (1)
• Fuel-injector test rig e.g. IOPmarine (2)
1
2
CONTENTS
-42-
Hand Held Devices
Series MH - for temperature and pressure
Sensors and probes
The high accuracy of the signal detection and processing is
achieved by means of powerful sensors with electronic linearisation of the characteristic curve. The correct probes are
available for a wide range of measuring tasks.
Operating comfort
The innovative design of the attractive housing and the advanced technology make the sensors comfortable to operate. In mobile use, all functions can be selected and carried
out easily by pressing the buttons. The membrane keypad
guarantees protection against dust and moisture.
Multi-function display
As well as MIN/MAX values, hold function and the selected unit of measurement, various calculation values, such
as temperature differential, pressure differential, dew
point or heat capacity can also be shown on the multifunction display.
E
A
Inputs
Automatic sensor recognition through standard DIN socket provides a plug-&-play
solution that is easy to install.
L
Data storage (log functions)
1
Outputs
Extensive alarm functions via the display,
freely scalable standard signal output and
buzzer and RS 485 interface.
Pc
PC-Interface
To transfer the measurement values and stored values to a PC, the majority of the MH instruments are fitted with a serial interface.
The EBS9M software packages are available with extensive recorder and display functions, as is the SOFT3050
for evaluation of the logged and alarm values. Process
sequences can then be monitored and analysed clearly
using the measurement procedures recorded and visualised, and all data can be exported into standard programs
(e.g. Excel).
A
Alarm & time displays
A visual and acoustic warning signal indicates
when measurements exceed or fall below a
programmed alarm point. Transmission via
PC is also possible. All data can be displayed with the year
and date, thanks to the real time clock.
S
User-defined characteristic curve MH3750
With this function, customer-specific curves can
be used, alongside the standard calculation of
the resistance/temperature characteristic curve
in compliance with EN60751.
The MH3750 has a very high accuracy of measurement.
In order to be able to exploit this high degree of accuracy, appropriate high-quality temperature sensors must
be used. Various standard classes of accuracy are available for this purpose.
For applications that require a very high degree of accuracy which is higher than the accuracy of the sensor
itself, it is recommended that the sensor be calibrated to
the MH3750 by means of a user-defined characteristic
curve.
Some instruments in the MH range can store
data. The integrated memory records up to
16200 measurement values. The date and time
is automatically added to the values. A real time clock is
integrated for this purpose.
Two log functions are available:
• In the STORE mode, data is transferred by means of
pressing a button and 99 records can be stored. The
values stored are shown directly on the display.
• In CYCLE operation, values are recorded automatically at a pre-programmed interval. 1800, 2700 or
5400 records can be stored. The stored values are
shown on a PC.
Explosion protection
Hand held pressure measuring devices and
pressure sensors are available in EXI versions
(EEx ib IIC T4-03ATEX0136X).
Optional for MH 3161 and MH 3181
CONTENTS
-43-
!
The handy and reliable instruments of the MH
range are used for measuring and recording
humidity, temperature or pressure. The MH
range is very flexible and is equally suitable for
simple measurements and special applications.
Series MH - for temperature
MH 3710 / MH 1150
MH 175 / MH 3750
Technical data
Type
MH 175
Measurement input
Pt1000
Pt100
TC-K
Measuring ranges
-70.0…199.9 °C
-199.99…199.99 °C
200.0…850.0 °C
-50...1150 °C
0.1 °C
0.01°C / 0.1 °C autorange
1 °C
°C
°C / °F
°C
3 ½ -digit
2 x 4 ½ -digit
3 ½ -digit
Resolution
Units
Display
Linearisation
MH 3710
MH 3750
Offset/Slope
MH 1150
Offset/Slope
Offset/Slope
Inputs
1
1
1
1
Log Function




EME8GMH3710000
50 supporting points
EME8GMH3750000
Offset/Slope
SIKA Oder code
EME8GMH1750000
EME8GMH1150000
ISSA-Code
61.176.01



IMPA-Code
65 18 11



CONTENTS
-44-
MH 3210 / MH 3230 / MH 3250
Technical data
Type
MH 1170
MH 3210
MH 3230
Measurement input
TC-K
TC-K/J/S/T/N
Measuring ranges
-65...199.9 °C
200...1150 °C
-199.9…199.9 °C
200...1750 °C
0.1°C / 1 °C
0.1°C / 1 °C
°C / °F
°C / °F
3 ½ -digit
2 x 4 ½ -digit
Offset/Slope
Offset
Resolution
Units
Display
Linearisation
MH 3250
Inputs
1
1
2
2
Log function




SIKA Oder code
EME8GMH1170000
EME8GMH3210000
EME8GMH3230000
EME8GMH3250000
ISSA-Code




IMPA-code




CONTENTS
-45-
MH 1170
Series MH - for pressure
MH 3161 / MH 3181
MH 3111 / MH 3151 / MH 3156
Technical data
Type
MH 3161
Measurement input
Measuring ranges
MH 3181
MH 3111
Internal Sensor
Mod. 01 (-1...25 mbar)
Mod. 07 (-10...350 mbar)
Mod. 12 (0...1300 mbar)
Mod. 13 (-100...2000 mbar)
Resolution
MH 3156
Depends on range of pressure sensor
0.001 mbar
Units
MH 3151
External Sensor
0.001 mbar / 10 mbar
mbar / bar / KPa / MPa / mmHg / PSI / mH2O
Display
2 x 4 ½ -digit
Linearisation
Offset/Slope
Offset/Slope
Inputs
1
1
1
1
2
Log function





SIKA Oder code
EME8GMH316107 EME8GMH318107 EME8GMH3111000 EME8GMH3151000 EME8GMH3156000
ISSA-Code

IMPA-Code

CONTENTS
-46-
Temperature and Pressure Sensors
Pt1000 measurement sensor for MH 175
Type
Standard sensor GTF 175 (Fig. 1)
Range
-70...200 °C
L [mm]
D [mm]
SIKA Order code
ISSA-Code
IMPA-Code
100
3
EME8GTF175000G
61.178.01
651815
EME8GES175000G 61.178.02
651816
Spike sensor GES 175 (Fig. 2)
-70...200 °C
100
3
Surface sensor GOF 175 (Fig. 3)
-70...200 °C
100
3 (head = 4) EME8GOF175000G 61.178.03
651817
Air/gas sensor GLF 175 (Fig. 6)
-70...200 °C
100
3 (head = 6) EME8GLF175000G
651818
61.178.04
Pt100 measurement sensor for MH 3710 and MH 3750
Type
Range
L [mm]
D [mm]
SIKA Order code
ISSA-Code IMPA-Code
-50...400 °C
150
3
EME8GTF401000G
61.178.10
651821
-50...400 °C
150
3
EME8GES401000G
61.178.11
651822
-50...400 °C
150
3 (head = 4)
EME8GOF401000G
61.178.12
651823
-50...400 °C
150
3 (head = 4)
EME8GLF401000G
61.178.13
651824
Range
SIKA Order code
ISSA-Code IMPA-Code
-65...1000 °C
L [mm] D [mm]
130
3
EME8GTF900000G
61.178.10
651826
-65...1000 °C
130
3
EME8GES900000G
61.178.11
651827
EME8GTF120030G
61.178.12
651828
Inconel sensor GTF 1200/300 (Fig. 1) -65...1150 °C
300
3
Surface sensor GOF 130 CU (Fig. 4)
-65...500 °C
130
3 (head = 4) EME8GOF130CU0G 61.178.13
651830
-65...900 °C
130
8
EME8GOF130000G
61.178.35
651831
-65...600 °C
130
3 (head = 6) EME8GLF130000G
61.178.40
651832
Piezoresistive pressure sensor for agressive media
PVC cable (1 m) with mini-DIN plug, fitting: st.st. 1/4 BSP A, casing: st.st. IP65
Pressure range
SIKA Order code
ISSA-Code
1 bar
EME8GMSD01BAE0
61.242.11
7 bar
EME8GMSD07BAE0
61.242.12
35 bar
EME8GMSD35BAE0
61.242.15
160 bar
EME8GMSD160BAE
61.242.16
250 bar
EME8GMSD250BAE
61.242.17
400 bar
EME8GMSD400BAE
61.242.18
Temperature sensors
IMPA-Code






Pressure sensor
CONTENTS
-47-
NiCr-Ni measurement sensor for MH 1150, MH 1170, MH 3210, MH 3250 and MH 3250
Type
Hand Held Measuring Instruments for non-contact temperature measurement
SemiTemp 2030 B2
Type
SemiTemp 6080 A1 / SemiTemp 6080 B2
SemiTemp 2030 B2
SemiTemp 6080 A1
MaxiTemp 24 A3
SemiTemp 6080 B1
MaxiTemp 24 A3
LC-Display, LOW-Bat., HOLD-function, max-data-store,
backlight, laser ON/OFF, tripod mount,
Configuration
Magnet clamp,
rubberized casing
Indication of average and difference, LO- and
HI-Alarm (buzzer), Data store for 12 values,
LOCK-function, Connection for external sensor
Pt1000 / 2-wire, rubberized casing
Graphic display for 10
measurement results,
LO- and HI-Alarm (buzzer)
Measuring range
-32...535 °C
-32...600 °C
-32...760 °C
-30...900 °C
Sight
2-point-laser
point-laser
point-laser
3-point-circle-laser
16/1
(distance/spot size)
30/1
50/1



60/1
serial interface
RS232 / 1mV / °C
Optical resolution
Output
Spectral range
Resolution
Accuracy
Emissivity
0.2 °C or 0.5 °F
0.95 (pre-set)
8...14 μm (universal)
0.1 °C or 0.2 °F
±1 % of rdg. or ±3 °C
adjustable 0.30...1.00
Temperature units
±0.75 % of rdg. or ±1 °C
adjustable 0.10...1.00
°C / °F switchable
Power supply
Dimensions
Weight
Accessory
Explosion
protection
(optional)

9 V block battery
2 x 1.5 V battery
195 x 135 x 40 mm (W x H x D)
200 x 170 x 50 mm (W x H x D)
320 g incl. battery
480 g incl. battery
Complete with strap and service/transport case
Model SemiTemp
Model MaxiTemp 24 A3-IS as
6080 B1-IS intrinsic
IS-version EEx ia IIC T4

safety acc. Factory
TÜV 00 ATEX 1597 X
Mutual (no ATEX)
SIKA Order code
EME8RAYST250EU
EME8RAYST60BEU
EME8RAYST80BEU
EME8RAYMX2TD00
ISSA-Code
61.175.05
61.175.10
61.175.12
61.175.15
IMPA-Code



65 18 06
CONTENTS
-48-
Simulators
Universal Pocket Calibrators and Multifunction Calibrators
Universal multifunction calibrator, series MC
• Digital, menu driven value adjustment,
22 keys and navigator
• Background-lit, graphic LC-display, 240 x 320 pixel
• Step-, ramp-, cycle-, HOLD- and scaling functions
• Serial USB PC interface (type B)
• Power supply via internal accumulator
incl. power pack (230 VAC)
• Dimensions approx. 210 x 110 x 50 mm /
weight approx. 900 g
UC RTD
Signals

• TC Types
UC TC
UC mAV
J, K, T, R, S, B, C,
U, L, N, E
MC 50

J, K, T, R, S, B, C,
U, L, N, E
• RTD
Pt50, Pt100, Pt200, Pt500,
Pt1000, Ni100, Ni120,
Ni1000, Cu10, Cu50


Pt50, Pt100, Pt200, Pt500,
Pt1000, Ni100, Ni120,
Ni1000 ,Cu10, Cu50
• Ω
Resistance
0…400 Ω, 0...4000 Ω


Resistance
0…400 Ω, 0...4000 Ω

Current 0(4)…20 mA,
25 mA
Current 0(4)…20mA,
25 mA
• mA

• mV

• V
• Hz

Voltage 0...100 mV




Voltage 0...100 mV
Voltage 0…10 V,
25 V, 50 V
Voltage 0…10 V,
25 V, 50 V

1...20 kHz
Features
Data logging function via flash memory for 10.000
measured values.
Graphic and tabular display of measured values
Accuracy
±0.012 %
of rdg. +K
±0.020 %
of rdg. +K
±0.015 %
of rdg. +K
±0.017 %
of rdg. +K
Resolution
0.01 °C or 0.01 °F
and 1...10 mΩ
0.1° C or 0.1 °F
and 1 μV
0,1 mA or 0,1 V
6 digits
SIKA
Order code
EME8AOCRTD000
EME8AOUC0TC000
EME8AOUCMAV000
EME8AOMC050000
UC RTD / UC TC


MC 50
UC mAV
CONTENTS
-49-
Universal pocket calibrator, series UC
• Digital, menu driven value adjustment,
6 keys and navigator
• Background-lit, graphic LC-display, 160 x 160 pixel
• Step-, ramp-, cycle-, HOLD- and scaling functions
• Serial USB PC interface (type mini B)
• Power supply via 4 x 1.5V batteries (AA type)
• Dimensions approx. 160 x 85 x 45 mm /
weight approx. 300 g
Your Personal Notes
CONTENTS
-50-
Gas Detection Equipment
CONTENTS
-51-
Portable Gas Detectors
SHIPSURVEYOR
Technical data
Measuring
Ranges
0...100 % LEL (Infrared)
0...100 % Volume Gas (Infrared)
0...25 % Oxygen (O²)
0...100 ppm Hydrogen Sulphine (H²S)
0...20 % Carbon Dioxide (CO²) Infrared
0...1000 ppm Carbon Monoxide (CO)
Display
LCD with backlighting
Resolution
The new SHIPSURVEYOR instrument is designed
to provide a solution for all your safety monitoring and
inerting marine application requirements. With 7 models to
choose from, this extremely versatile instrument complies
with international marine regulations for Confined Space
Monitoring, Inerting, Pre-entry Testing, Tank Cleaning
and many other marine applications in vessels such as
LNG / LPG Tankers, oil tankers, cargo vessels as well as
container vessels
LEL
0...100 %
1%
Vol Gas
1%
1%
Oxygen
0...21 %
21...25 %
0,1 %
1%
Hydrogen Sulphide
0...100 ppm
1ppm
Carbon
Dioxide
0...5 %
5...20 %
0,1 %
0,5 %
Carbon Monoxide
0...1000 ppm 1ppm
Alarms
Highly visible flashing LED’s on display
panel. Sounder in excess of 80dB(A),
typically 85dB(A)
Sampling
system
Integral pump with flow fail sensor.
Sample path is protected by a hydrophobic filter and automatic pump switch-off.
Weight
1.35 kg
• Infrared (IR) technology for inerting or
purging operations
Dimensions
180 x 95 x 100 mm
• Ability to enter up to 300 unique user identified
location areas on a vessel and record gas values
detected in each area
Construction/
Protecting rate
Moulded polypropylene case
protected to IP54
• Integral pump capable of drawing a sample from
30 meters
Power
supply
2 Alkaline cells, or
2 Rechargeable cells
Battery life
2 x Alkaline 20 Hrs.
2 x Rechargeable 8 Hrs.
Environment
Temperature limits -20...50 °C
(-4...122 °C)
Humidity: 0...100 % R.H. non-condensing
Certification
ATEX II 2 G Exd ia IIB T3 Gb
(-20 °C < Tamb < 50 °C)
IEC Ex d ia IIB T3 (-20 °C < Ta < 50 °C)
Features
• Easy to use / low maintenance instrument
fully certified to MED
• Selectable dual mode operation:
- Confined Space Monitor (CSM) or
- Combustible Gas Indicator (CGI)
• Rugged impact resistant carbon impregnated
polypropylene casing
• LCD with automatic backlighting in poor ambient
lighting conditions. All gas readings displayed together
with operational and status information.
• Complete with Data Downloading and FlexiCal
(Calibration) software.
• Innovative range of accessories specifically designed
to support this specialised marine instrument.
MED (0038/YY)
- Module B&E
CONTENTS
-52-
Order code
All instruments are supplied with:
•
•
•
•
•
•
•
•
•
•
•
Hard carrying case
User handbook
Probe handle with dust and water filters
1m conductive tubing with quick connect
15cm probe
Neck/Shoulder and waist harness
Hex driver, 10 x dust filters
Quick pp guide
Calibration certificate
Configuration report
Data downloading package
c/w software & IrDA adapter
• Software CD & Calibration software (Flexical)
Instrument carrying case and accessories
SIKA Order code
Shipsurveyor 1 LEL / VOL
GWS100021
Shipsurveyor 2 LEL / VOL / O2
GWS100022
Shipsurveyor 3 LEL / VOL / O2 / H2S
GWS100023
Shipsurveyor 4 LEL / VOL / O2 / CO2
GWS100024
Shipsurveyor 5 LEL / VOL / O2 / CO2 / CO
GWS100025
Shipsurveyor 6 LEL / VOL / O2 / H2S / CO
GWS100026
Shipsurveyor 7 O2 / CO2
GWS100027
Note: The default calibration gas is butane If another calibration gas is required i.e. methane, propane or pentane please specify when ordering.
Accessories
GZS200370
GZS200371
Hydrophobic (water) filter
GZS200358
Cotton (dust) filter - box / 10
GZS000077
Sample line adaptor
GZS200688
10 m conductive sample line with waist harness connector
GZS100132
Clear sample line per metre
GZS200712
35 cm plastic probe
GZS300427
50 cm stainless steel probe
GZS200287
Rechargeable option kit (Including base, power supply and batteries)
GZS100110
Gas Detection
Neck/Shoulder harness
Waist harness
Note: The waist harness connector is secured onto the waist harness
to take the weight of the sample line. It has quick connection fittings.
CONTENTS
-53-
Hand Held Gas Detectors
V!SA Series
The robust and accurate portable gas detectors, the
V!SA and V!SA 2 provide unrivalled protection in confined
space applications with audible and visual alarms in the
event of exposure to flammable or toxic gases.
V!SA
A
V!SA - the confined space monitor
Detecting and displaying up to 5 gases simultaneously
using „plug and play“ sensor technology, the V!SA is
suitable for a host of applications in a variety of industries
using infra-red, PID and catalytic sensors. Up to 13
different gas sensors are available to make sure to get
the best solution.
Pre-entry checking can be carried out with the optional
internal sampling pump, and diffusion operation ensuring
maximum battery life in confined spaces.
V!SA 2 - low cost confined space monitor without pump
A robust and accurate portable gas detector, the
V!SA 2 provides unrivalled protection in confined space
applications with audible and visual alarms in the event
of exposure to flammable or toxic gases. Only 4 Gas
sensors are available.
Detecting and displaying up to 4 gases simultaneously
using “plug and play“ sensor technology, the V!SA 2
is suitable for a host of applications in the shipping
industry. Diffusion operation ensures maximum battery
life in confined spaces
V!SA-2
Benefits
•
•
•
•
•
Brilliant visual alarm
Ultra loud alarm - 95 dBA
Plug‘n Play sensor technology
Robust, Hi-Viz, Hi-Impact resistance
International certification and conformance
Applications
• Personal safety in confined space
H2S/O2/CO hazards
• General safety in confined space
• Shipping - general
• Shipping - fumigant
• Permit to work systems
• Pressurised tunnelling
• Fleet auxiliary
MED
UL 913 Class I,
Div 1 Groups ABCD
CONTENTS
-54-
Technical data
Type
V!SA
Alarms
V!SA 2








Brilliant visual alarm 360° distinct alarm level ultra loud audible alarm, 95 dBA
Sampling system
Diffusion operation optional internal sampling pump
Weight
Diffusion operation
0.4 kg
Dimensions
140 x 85 x 45 mm
Power supply
Alkaline AA cells NiMH re-chargeable pack
Alkaline up to 24 hrs (17 hrs with pump)
Re-chargeable up to 20 hrs (14 hrs with pump)
Battery life
Environment
0-100%
0-25 %
0-100 ppm
0-1000 ppm
0-100 %
0-25 %
0-100 ppm
0-1000 ppm
0-100 ppm/ 0-1000 ppm
0-30 ppm
0-10 ppm
0-20 ppm
0-100 ppm
0-300 ppm
0-5 %
0-100 %
LEL
O2
H2S
CO
H2S / CO
Measuring SO2
CL2
ranges
NO2
NH3
NO
CO2
LEL (IR)
Alkaline up to 24 hrs
Re-chargeable up to 20 hrs
Temperature limits: -20...40 °C Humidity: 0 - 95% RH non-condensing
ATEX
II 2 G EEX iad IIC T3/T4
EC Ex d ia IIC T3
UL 913 Class I Div 1 Groups ABCD
EC Type Examination Certificate MED
Certification
Order codes
Type
V!SA
Instrument configuration
NiMH + Pump + Datalogging
NiMH + Pump
NiMH + Datalogging
NiMH
Complete instruments
Type
V!SA-2
GWV
4003680
4003690
4003780
4003790
Sensors (max. 4 types)
LEL
O2
H2S
CO
Infrared LEL
H2S / CO **
GWV
Instrument configuartion
LEL / O2 - Rechargeable
LEL / O2 H2S - Rechargeable
LEL / O2 CO - Rechargeable
LEL / O2 / H2S / CO - Rechargeable
A
D
E
F
N
G
400902
400900
400905
400907
Notes
All options include datalogging as standard.
V!SA 2 is only available in these configurations and
as non-pumped only.
* Chemical filter - Methane, Propane, Butane, Pentane, Hydrogen
** 5 gas instrument only with this dual sensor fitted
Battery Packs for V!SA 2
SIKA Order code
Long duration NiMH battery pack
GSV400548
CONTENTS
-55-
Gas Detection
Complete instruments
T.ex Single Gas Detector
Transportable Single Gas Detector
Technical data
Available in oxygen, hydrogen sulphide and carbon
monoxide versions, this instrument offers maintenance
free gas detection warranted for the life of the instrument.
Bump test and calibration stations are available that
enable quick gas verification tests for the operator with
the added benefit of printed calibration certificates.
Sensors
T.ex - O2
T.ex - H2S
Measuring
ranges
0 to 25 %
Warranty
2 years
T.ex - CO
0 - 100 ppm
0- 500 ppm
3 years
Features
•
•
•
•
•
•
•
Visible
Audible
Durable
Easy to handle
One-button operation
Replaceable, not disposable
Long life cell & battery:
2 years T.ex O2, 3 years T.ex CO/T.ex H2S
• Super grip fastener, moulded into case no screws required
• High gloss - easy clean finish
Resolution
Alarms
Performance
tests
Weight
Dimensions
H2S
CO
0 - 25 %
0 - 100 ppm
0 - 500 ppm
0.1 %
1 ppm
1 ppm
Audible 95dB @ 10 cm (4 in.)
Vibrating alert, ultra bright LEDs
EN 50104 (oxygen)
EN 45544 (toxic)
76g Toxic / 86g Oxygen
85 x 55 x 29 mm
Physical
properties
Durable high gloss finish
Power supply
Internal life-long battery:
2 years T.ex O2
3 years T.ex CO
3 years T.ex H2S
Environment
Temperature limits: - 20 °C ...50 °C
Humidity: 0 - 98% RH
Applications
• Personal safety in confined space - H2S/O2/CO
hazards
• General safety in confined space
• Confined space in gas
distribution/transmission/shipping
• Permit to work systems
• Pressurised tunnelling
• Fleet auxiliary
O2
Certification
ATEX II 1 G Ex ia IIC T4
UL 913 Class I, Div 1 Groups ABCD
EC Type Examination Certificate MED
CONTENTS
-56-
Order code
Instruments
SIKA Order code
Long life cell & battery for 2 years
Oxygen
GWT800002
Hydrogen sulphide
GWT800003
Carbon monoxide
GWT800004
Long life cell & battery for 3 years
Hydrogen sulphide
GWT700403
Carbon monoxide
GWT700404
Note: The insturments are supplied with
user handbook and calibration certificate
Accessories
SIKA Order code
Bump Test Station complete with power supply
GZT800121
Bump Test Station
1
2
tESt
~ 15 sec.
~ 2 sec.
3
4
Gas Detection
7 PSI
START
7 PSI
Pass
x1
7 PSI
5
PASS
Fail
FAIL
CONTENTS
-57-
Your Personal Notes
CONTENTS
-58-
Flow
Measurement
CONTENTS
-59-
Oval Gear Flow Meters
Oval Gear Flow Meters, Series VO
• Positive displacement flow meters, oval gear types
• Volumetric flow rate or total flow measurement
• Applicable for fluids such as lubrication oils,
mineral oils, hydraulic oils, fuels, liquified gases
and others
• Flanged or threaded process connections
• Two local displays are available
- Battery powered version,
approx. 5 years life circle
- DC powered version with pulse and analog
output signal
Function
The flow measuring unit consists of two highly precise
meshing oval gears. The liquid flow causes the rotation of
these gears. The exact liquid volume moved through the
meter at one revolution is defined by the geometry of the
measuring chamber.
The rotation is picked-up by a sensing element. A battery
powered local display indicates the rate of flow and the
total flow. The DC powered display additionally provides
two output signals for further processing.
Measuring principle
rinciple
p
ple
Options
• Pulse output signal NPN open collector,
no local display
• Individual calibration
• O-ring material FEP
(pmax = 25 bar, not applicable for VO2AALV...)
0,5
30*
0,25
15*
0,75
0,5
80*
50*
0,25
30*
15*
1*
1*
0,4
0,8
1,2
1,6
80*
50*
30*
15*
0,25
0
0
2
150*
0,5
1*
0
0
1
2
3
4
5
0
2
4
6
2000*
1,0
3
0,75
0,5
40*
10*
6*
0,9*
0,25
Pressure drop [bar]
70*
10
4
VO2AALV...
70*
0,5
40*
10*
6*
0,9*
0,25
Pressure drop [bar]
VO10VAN...
8
1000*
150*
150*
1,0
350*
* Viscosity [mPas]
1000*
Flow rate Q [l/min]
* Viscosity [mPas]
1000*
Flow rate Q [l/min]
* Viscosity [mPas]
350*
Flow rate Q [l/min]
0,75
Pressure drop [bar]
Pressure drop [bar]
Pressure drop [bar]
50*
0
VO5AVAN...
1,0
VO1AVAN...
0,75
0,75
Pressure drop [bar]
350*
1,0
VO06VAN...
500*
1,0
VO03VAN...
150*
350*
80*
350*
150*
Pressure drop diagrams
250*
2
100*
1
10*
0
0
0
0
10
20
30
40
50
0
20
40
60
80
Flow rate Q [l/min]
Flow rate Q [l/min]
* Viscosity [mPas]
* Viscosity [mPas]
100
0
10
20
30
Flow rate Q [l/min]
* Viscosity [mPas]
CONTENTS
-60-
Technical data and order code
Technical data
Stainless steel version, threaded
Aluminium version, flanged
Measuring accuracy
±1 % of reading
±1 % of reading
Repeatability
±0.1 %
±0.1 %
Medium temperature
-20...70 °C
-10...70 °C
Ambient temperature
-20...70 °C
-20...70 °C
Nominal pressure
PN 40
PN 16
Viscosity range
(higher viscosities on request)
1.5...150 mPas
1.5...150 mPas
Materials
Housing
Stainless steel
Aluminium
Oval gears
Stainless steel
Aluminium
O-ring
NBR
Local display
battery powered
with signal output
battery powered
with signal output
Power supply
Built-in battery
14...24 V DC
Built-in battery
14...24 V DC
IP65
IP65
IP65
Analog output
Pulse output
Pulse rate



Order code
4...20 mA
NPN open collector
100 pulses per litre
Flow range
Process connection
Order code
1…30 l/min
Flanges acc. DIN 2633
0.2...2 l/min
½“ BSP female
VO03VANDI3K
VO03VANTI3K
0.5...5 l/min
½“ BSP female
VO06VANDI3K
VO06VANTI3K
1...10 l/min
½“ BSP female
VO1AVANDI3K
VO1AVANTI3K
5...50 l/min
1“ BSP female
VO5AVANDI5K
VO5AVANTI5K
10...100 l/min
1“ BSP female
VO10VANDI5K
VO10VANTI5K


Stainless steel version, threaded
IP65



4...20 mA
NPN open collector
100 pulses per litre
Order code
Order code
VO2AALVDF4K
VO2AALVTF4K










Flow Measurement
Protection class
Signal output
FKM
Aluminum version, flanged
-61-
CONTENTS
Paddle Flow Switches
Paddle Flow Switches for Liquids, Series VH500
• Applicable for water, oil etc.
M20x1,5
• Insertion into pipes or pipe sections (Tees)
DN 25...DN 50 or larger
• Four paddles in different sizes included,
selection in accordance to the pipe size
• Robust construction
• Vibration proof to 4 g (2 g at dry test)
• Wide set point ranges, universally applicable
• Setpoint adjustment by paddle size selection
and by adjustment screw
• Micro switch with high contact rating
• Approved by Germanischer Lloyd
Technical data
Max. medium temperature
100 °C
Max. ambient temperature
85 °C
24 VDC, 5 A resistive load, 4 A inductive load
60 VDC, 1 A resistive load 0,5 A inductive load
250 VAC, 10 A resistive load, 10 A inductive load (pf 0.75)
Change over contact,
max. contact rating
Protection class
IP54
Material
Brass
Max. pressure rating
6 bar
Max. test pressure (2 min.)
10 bar
15 bar
89 824-94 HH
94 970-10 HH
Germanischer Lloyd
Certificate No.
Thread connection
Order code
10 bar
1“ BSP
M 33x2
VH500NI3451R41
1“ BSP
VH500NM3451M41
VH500RI3451R41
M 33x2
VH500RM3451M41
Set point ranges
Size of pipe section*
Set point ranges [m3/h]**, water (20 °C, up to 2 bar)
Paddle to select
VH500N...
ON
VH500R...
OFF
ON
OFF
DN 25
25 x 30 mm
1.10...1.25
1.05...1.20
1.60...1.80
1.40...1.55
DN 32
25 x 38 mm
1.70...2.05
1.60...1.95
2.45...2.60
2.00...2.25
DN 40
25 x 46 mm
2.20...2.55
2.10...2.45
2.55...2.80
2.05...2.35
DN 50
25 x 58 mm
3.25...3.85
3.15...3.75
3.90...4.25
3.20...3.55
* Installation into tees acc. EN 10242
** Higher set points achievable by use of smaller paddle sizes.
Tolerance of the set point ranges: ±15 %, set points for bigger pipe sizes on request
CONTENTS
-62-
Your Personal Notes
CONTENTS
-63-
Our Production and Sales Range
®
®
Flow Sensors without moving Parts
Turbine Flow Sensors
Flow Switches
Pressure Gauges and Pressure Sensors
Industrial Thermometers
Electronic Digital Thermometers, Dial Thermometers
Measuring Instruments
Temperature Sensors
Calibrators, DKD-Laboratory
Your competent partner
for measurement and control
...measurement...control ...calibration
Phone: 0700 CALL SIKA
Phone: +49 5605 803-0
Fax:
+49 5605 803-54
E-Mail: [email protected]
Internet: http://www.sika.net
Struthweg 7-9, 34260 Kaufungen
P. O. Box 11 13, 34254 Kaufungen
Germany
Marine_e 05/2010

SIKA Thermometers

Transcription

Similar documents

Product Brochure for Sikaflex 2c NS Caulk Polyurethane Sealant

case study jordan commons

case study frenchman`s reef

Case Study - Sika Corporation US

SIKA AT WORK DFO HOMEBUSH SHOPPING CENTRE