Color Body Porcelain Floor and Wall Tile

S PA N
Color Body Porcelain Floor and Wall Tile
S P A N
B Y Shown: 34501T 12x24 Snow textured (pressed)
SpanHDP is designed after a single large piece of deep blue shellstone. Harvested from a quarry in Belgium,
the deep blue color tone with large fossilized sediment is a classic that has been a staple in floor design all
over the world. Refined and durable, SpanHDP is specially treated with Microban® antimicrobial protection
that is incorporated into the tile surface. Microban® works continuously, inhibiting the growth of bacteria,
improving visible cleanliness, and reducing odors—an amazing tool in the hands of architects and
designers looking to develop exceptional environments with high performance in regards to hygiene and
ease of maintenance.
Recreating a level of natural beauty and elegance that few surfaces can match, SpanHDP is available in four
colors: Snow- a light, off white; Cream-a medium toned tan; Silver- a light gray; and Baltic- a dark slate gray.
Two contemporary large formats, 12x24 and 24x24 featuring rectified edges, will beautifully compliment
any décor. For exteriors SpanHDP is offered as a pressed 12x24 tile with a flamed texture available in Snow
and Silver colors. And two mosaic tile choices: a 12x24 random sized pattern tile and a 12x12 basket weave
pattern, compliment the line.
Manufactured using advanced HDP—High Definition Porcelain® printing technology and with the
technical performance of porcelain, SpanHDP is appropriate for all applications in both residential and
commercial settings. It is entirely made in the USA (at the Florida Tile Green Squared certified advanced
manufacturing center in Lawrenceburg, KY) of 40% pre-consumer recycled content, meets the DCOF
AcuTest requirements to be installed in wet areas and is GREENGUARD® and Porcelain Tile certified.
Shown on Cover: 34517 24x24 Baltic, 34501/RSP12x24 Snow RSP Mosaic
S H A D E VA R I AT I O N
34501 Snow
34501T Snow textured (pressed)
34530 Cream
34513 Silver
34517 Baltic
34513T Silver textured (pressed)
SNOW
Shown: 34501 12x24 Snow
34501/RSP12x24
Snow RSP
34501 24x24
Snow
Shown on Left: 34501 24x24 Snow
34501 12x24
Snow
34501T 12x24
Snow textured (pressed)
34501/M122BW
Snow Basketweave
CREAM
Shown: 34530 12x24 Cream
34530/RSP12x24
Cream RSP
34530 24x24
Cream
34530 12x24
Cream
Shown on Left: 34530 24x24 Cream, 34530/M12BW Cream Basketweave Mosaic
34530/M122BW
Cream Basketweave
SILVER
Shown: 34513 12x24 Silver
34513/RSP12x24
Silver RSP
34513 24x24
Silver
34513 12x24
Silver
Shown on Left: 34513 12x24 Silver, 34513T 12x24 Silver textured
34513T 12x24
Silver textured (pressed)
34513/M122BW
Silver Basketweave
B A LT I C
Shown: 34517 12x24 Baltic
34517/RSP12x24
Baltic RSP
34517 24x24
Baltic
34517 12x24
Baltic
Shown on Left: 34517 24x24 Baltic, 34501/RSP12x24 Snow RSP Mosaic
34517/M122BW
Baltic Basketweave
Shown: 34513 24x24 Silver
S P A N
B Y Typical Uses
SpanHDP color body porcelain floor and wall tile is appropriate for all residential
and commercial wall, countertop and backsplash applications, all residential
and most commercial floor applications.
This collection features patented Microban® technology that consists of
treating the ceramic material with a formulated antimicrobial additive capable
of expressing high antimicrobial efficacy using established international
laboratory protocols.
Notice: Not all flooring products are suitable for wet areas, specialized
applications or commercial use. Please refer to the American National Standard
Specifications for Ceramic Tile (ANSI A137.1) for ceramic, stone and glass
installation for specific usage and installation information.
This Florida Tile product will contribute to USGBC LEED points and the ANSI
approved NAHB Green Building Points.
Properties
(Floor)
ASTM
ANSI
Results¹
DCOF AcuTest2
A137.1
≥0.42
Pass
As Reported3
Class IV
Visible Abrasion Resistance C-1027
Glaze Hardness
Mohs Scale N/A
7 Mohs
Break Strength
C-648
250 lbf.
Pass
Water Absorption
C-373
<0.5%
<0.5%
Field Tile
Nominal Size¹
Metric (cm)
12” x 24”
30 x 60
.5
10mm
12” x 24” textured finish
30 x 60
.5
9mm
24” x 24”
60 x 60
.25
10mm
1
2
3
Pcs./Sq Ft2
These values may vary from lot to lot.
These values are based on actual sizes including the grout joint.
May not apply to textured surfaces or tiles with uneven back patterns.
Trim
Shape
Bullnose
SKU
Nominal Size
Metric (cm)
P43C9
3” x 12”
7.5 x 30
Color Variations
Color reproductions in this printed piece may vary from actual tile colors.
Final selection should be made from actual tile samples.
V2 = Slight Variation
Clearly distinguishable differences in texture and/or pattern with
similar colors.
Recycled
Content
These tests are performed by a 3rd party testing lab using industry standard equipment and techniques.
Values are offered in good faith as being accurate and typical of normal production. Due to the natural
variation of raw materials and manufacturing processes, the values of the purchased product for any particular
installation may vary.
2
ANSI A137.1 standard, ceramic tiles selected for level interior spaces expected to be walked upon when wet
must have a minimum wet DCOF AcuTest value of 0.42.
3
Class 0 Not recommended for floors, Class I Light Residential, Class II Residential, Class III Heavy Residential or
Light Commercial, Class IV Commercial, Class V Heavy Commercial.
1
#48886R 5/16
www.floridatile.com
Thickness3
Recycled
Content
&
20%
are registered trademarks in the U.S. of Florida Tile, Inc.© 2016