owner`s manual - Lifetime Products

COMPLETE BASKETBALL SYSTEM
MODEL
N° 90181
OWNER’S MANUAL
CO
PY
OWNER’S MANUAL
Keep this Product ID Number and use when contacting Customer Service:
REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM
At Lifetime, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your input
is valuable to us.
t:PVDBOBMTPPQUJOUPSFDFJWFOFXQSPEVDUOPUJmDBUJPOTPSQSPNPUJPOT
t*OUIFVOMJLFMZFWFOUPGBQSPEVDUSFDBMMPSTBGFUZNPEJmDBUJPOZPVSSFHJTUSBUJPOQSPWJEFTUIFJOGPSNBUJPOXFOFFEUPOPUJGZZPV
directly.
t3FHJTUSBUJPOJTGBTUFBTZBOEDPNQMFUFMZWPMVOUBSZ
LIFETIME’S PROMISE TO YOU:
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your
personal data to other third parties, or allow them to use your personal data for their own purposes.
We invite you to read our privacy policy at www.lifetime.com
REGISTER today!
Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
**U.S. and Canada customers ONLY**
PY
*'"44*45"/$&*4/&&%&%
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865
)0634BNUPQN.POEBZUISPVHI'SJEBZ.PVOUBJO4UBOEBSE5JNF
$BMMPSWJTJUPVS8FCTJUFGPS4BUVSEBZIPVST
'PSDVTUPNFSTPVUTJEFUIF64PS$BOBEBQMFBTFDPOUBDUUIFTUPSFGPSBTTJTUBODF
CO
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
5PFOTVSFTBGFUZEPOPUBUUFNQUUPBTTFNCMFUIJTQSPEVDUXJUIPVUSFBEJOHBOEGPMMPXJOHBMMJOTUSVDUJPOTDBSFGVMMZ$IFDLUIFFOUJSF
CPYBOEJOTJEFBMMQBDLJOHNBUFSJBMTGPSQBSUTBOEPSBEEJUJPOBMJOTUSVDUJPONBUFSJBM#FGPSFCFHJOOJOHBTTFNCMZJEFOUJGZBOEJOWFOUPSZ
BMMQBSUTBOEIBSEXBSFVTJOHUIFQBSUTBOEIBSEXBSFMJTUTBOEJEFOUJmFSTJOUIJTEPDVNFOU1SPQFSBOEDPNQMFUFBTTFNCMZVTFBOE
TVQFSWJTJPOBSFFTTFOUJBMGPSQSPQFSPSJFOUBUJPOBOEUPSFEVDFUIFSJTLPGBDDJEFOUPSJOKVSZ"IJHIQSPCBCJMJUZPGTFSJPVTJOKVSZFYJTUT
JGUIJTQSPEVDUJTOPUJOTUBMMFENBJOUBJOFEBOEPSPQFSBUFEQSPQFSMZ'BJMVSFUPDPNQMZXJUIBOZPGUIFXBSOJOHTJOUIJTJOTUSVDUJPO
NBOVBMNBZSFTVMUJOTFSJPVTQFSTPOBMJOKVSJFTTVDIBTDVUTCSPLFOCPOFTOFSWFEBNBHFQBSBMZTJTCSBJOJOKVSZPSEFBUI'BJMVSFUP
DPNQMZNBZBMTPSFTVMUJOQSPQFSUZEBNBHF1MFBTFIFFEBMMXBSOJOHTBOEDBVUJPOT
t*GVTJOHBMBEEFSEVSJOHBTTFNCMZVTFFYUSFNFDBVUJPO
t"UMFBTUTJYDBQBCMFBEVMUTBSFSFDPNNFOEFEGPSUIJTPQFSBUJPO
t"TTFNCMFUIFQPMFQSPQFSMZ'BJMVSFUPEPTPDPVMEDBVTFTFSJPVTJOKVSZPSQSPQFSUZEBNBHF
Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.
INSTRUCTION #1124426 B
2
8/29/2012
SAFE HANDLING OF THE GLASS BACKBOARD
BEFORE & DURING ASSEMBLY
5IPSPVHIMZJOTQFDUUIF#BDLCPBSECFGPSFCFHJOOJOHBTTFNCMZ%POPUVTFUIF#BDLCPBSEJGUIFSFBSFBOZDIJQTDSBDLT
PSPUIFSEFGFDUTJOUIFCPBSE$BMMPVS$VTUPNFS4FSWJDF%FQBSUNFOUJGBOZQSPCMFNTBSFGPVOE
6TFFYUSFNFDBVUJPOXIFOIBOEMJOHPSXPSLJOHBSPVOEUIF#BDLCPBSE
,FFQUPPMTIBSEXBSFBOEPUIFSTIBSQBOEIFBWZPCKFDUTBXBZGSPNUIF#BDLCPBSE
/FWFSSFTUUIF#BDLCPBSEEJSFDUMZPOBIBSETVSGBDFTVDIBTDPODSFUFPSQBWFNFOU"MXBZTQMBDFDBSECPBSEPSPUIFS
DVTIJPOJOHNBUFSJBMCFUXFFOUIF#BDLCPBSEBOEUIFHSPVOEPSPUIFSIBSETVSGBDFT
"MXBZTMBZUIF#BDLCPBSEnBU/FWFSQMBDFJUJOBQPTJUJPOXIFSFJUNJHIUUJQPWFSBOECSFBL
(MBTTJTWFSZIFBWZ"MXBZTVTFBUMFBTUUXPBEVMUTXIFOQJDLJOHVQPSNPWJOHUIF#BDLCPBSE
GENERAL HANDLING & CARE
*OTQFDUUIF#BDLCPBSECFGPSFFBDIVTF%POPUVTFUIF#BDLCPBSEJGUIFSFBSFBOZDIJQTDSBDLTPSPUIFSEFGFDUTJOUIF
CPBSE*GBOZTJHOTPGEBNBHFBSFGPVOEGPMMPXUIFJOTUSVDUJPOTGPSi)BOEMJOH#SPLFO(MBTTwCFMPX
6TFFYUSFNFDBVUJPOXIFOIBOEMJOHPSXPSLJOHBSPVOEUIF#BDLCPBSE
5IF#BDLCPBSEXBTEFTJHOFEGPSVTFXJUIB#BTLFUCBMM%POPUVTFPUIFSUZQFTPGCBMMTPSPUIFSPCKFDUTXJUIUIFTZTUFN
%POPUVTFUIJTTZTUFNGPSBOZQVSQPTFPUIFSUIBOJUTEFTJHOFEQVSQPTF
HANDLING BROKEN GLASS
At the first sign of breakage:
,FFQFWFSZPOFFTQFDJBMMZDIJMESFOBXBZGSPNUIFJNNFEJBUFBSFBPGUIF#BDLCPBSE
1VUPOFZFQSPUFDUJPOBOEXFBSUIJDLVUJMJUZHMPWFTBOEMPOHTMFFWFT4NBMMQJFDFTPGUFNQFSFEHMBTTNBZQPQPVUPGUIF
#BDLCPBSE
-PXFSUIF#BDLCPBSEUPJUTMPXFTUIFJHIUBOEDPNQMFUFMZDPWFSUIF#BDLCPBSEXJUIBUBSQ
%POPUSFNPWFUIF#BDLCPBSEGSPNUIFTZTUFNXJUIPVUmSTUMPXFSJOHUIFTZTUFNUPJUTMPXFTUTFUUJOH$BSFGVMMZSFBEBOE
GPMMPXUIFi3FNPWJOH#BDLCPBSEGSPN4ZTUFNwJOTUSVDUJPOTCFMPX
REMOVING BACKBOARD FROM SYSTEM
See Section 7 of this manual for instructions on how to safely remove the backboard from the system.
*Six adults required to
complete assembly*
Only adults should set up the product. Do not allow children
in the setup area until assembly is complete.
3
BEFORE BEGINNING ASSEMBLY
" ,FFQUIFIBSEXBSFCBHTBOEUIFJSDPOUFOUTTFQBSBUF*GBOZQBSUTBSFNJTTJOHDBMMPVS$VTUPNFS
4FSWJDF%FQBSUNFOU
# 5FTUmUBMM#PMUTCZJOTFSUJOHUIFNJOUPUIFJSSFTQFDUJWFIPMFT*GOFDFTTBSZDBSFGVMMZTDSBQFBXBZBOZ
FYDFTTQPXEFSDPBUJOHCVJMEVQGSPNJOTJEFUIFIPMFT%POPUTDSBQFBXBZBMMPGUIFQPXEFSDPBUJOH
#BSFNFUBMNBZSVTU:PVNBZOFFEUPQPVOETPNF#PMUTJOUPQMBDFXJUIBIBNNFSPSNBMMFU
*This system comes in 3 boxes.
Do not attempt assembly until all 3 boxes have arrived.*
TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY
1/2”
9/16”
3/4”
1/4” Allen Wrench
Shovel
3/8” Allen Wrench
Rubber Mallet
Carpenter’s Level
Tape Measure
15/16”
Adjustable Wrench
PQUJPOBM
Flathead Screwdriver
Ladder
4
Cement
ZBSEPS
MCCBHY
ASSEMBLY GUIDES
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is located at the top, left-hand
corner of the page and indicates which tools
and hardware are needed to complete the
assembly steps on a page.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
This area is usually located in the bottom,
left-hand corner of a step and indicates that
special attention is needed to perform a
particular part of a step.
These areas are usually located in the bottom,
right-hand corner of a step and indicate that
damage to the product or serious injury may
occur if the caution or warning is not heeded.
Throughout the Parts & Hardware List, Part
& Hardware Identifiers, and instructions
are three-letter IDs. These IDs are below
the images of the parts and hardware to
help you locate and identify the parts and
hardware during assembly. These IDs are not
necessarily on the parts themselves.
SEC
This area is located at the top, right-hand
corner of the page and shows an image of the
product with shaded parts indicating which
section is being assembled.
!
#
Note:
CAUTION
WARNING
ADZY
wYw1BO)FBE4DSFX
PARTS LIST
ID
Item Description
CZA
Parts Box 1
ALG
AJR
AKG
ALS
AEZ
"&*
AKT
CXY
CXZ
AMT
Pole
(BT4QSJOH
(BT4QSJOH$PWFS
Lifter Arm
w3FCBS
+#PMU
+#PMU5FNQMBUF
Left Cam Plate
3JHIU$BN1MBUF
8BSOJOH4UJDLFS"QQMJFEUP1PMF
CZB
Parts Box 2
"+*
",%
AKE
#BDLCPBSE
6QQFS&YUFOTJPO"SN
-PXFS&YUFOTJPO"SN"TTFNCMZ
Qty
1
3
3
2
4
4
1
1
1
1
ID
Item Description
CZC
Parts Box 3
ALX
AKZ
",*
AMA
CYA
AMO
AKX
ALC
AKP
Rim
Net
Lift Handle
Rim Cover Plate
)BOEMF#SBDLFU
5SJHHFS1JO
)BOEMF-PDL#SBDLFU
1BE-PDLXJUI,FZOPUQJDUVSFE
)FJHIU4UJDLFS
Qty
1
1
1
1
2
1
2
2
1
1
2
1
HARDWARE LIST
ID
Item Description
CZD
Setup Hardware
AEO
CYV
AER
wYw)FY#PMU
w)FY/VU$PVQMFS
w)FY/VU
CZE
Handle to Pole Assembly Hardware
CZM
%%;
CZV
CYC
AEH
%%:
%':
CYE
CZO
$:'
CYG
CYN
AJZ
AKH
wYw(SBEF#PMU
wYw(SBEF#PMU
wYw(SBEF#PMU
w-BSHF1PMZ4QBDFS
w1MBTUJD8BTIFS
wYw4QBDFS
wYw4QBDFS
wYw4QBDFS
wYw4QBDFS
w(SBEF/ZMPDL/VU
w(SBEF/ZMPDL/VU
w/ZMPDL/VU
%BSL-JUIJVN(SFBTFOPUQJDUVSFE
4JMJDPOF(SFBTF8IJUF
OPUQJDUVSFE
CZF
Extension Arms to Pole Assembly Hardware
CZR
CZP
CZQ
CZT
CZX
CZW
CZS
CYM
AEG
AEH
$:'
CYG
wYw(SBEF#PMU
wYw(SBEF#PMU
wYw(SBEF#PMU
wYw(SBEF#PMU
wYwYw4QBDFS
wYwYw4QBDFS
wYwYw4QBDFS
w8BTIFS
w1MBTUJD8BTIFS
w1MBTUJD8BTIFS
w(SBEF/ZMPDL/VU
w(SBEF/ZMPDL/VU
Qty
1
1
8
3
1
1
2
2
4
2
4
2
3
1
1
1
1
4
2
1
1
2
2
1
4
4
4
5
3
6
ID
Item Description
BCR
Backboard to Pole Assembly Hardware
CZQ
CYT
CZU
AEG
CYG
$:'
wYw(SBEF#PMU
wYw(SBEF#PMU
wYw4QBDFS
w1MBTUJD8BTIFS
w(SBEF/ZMPDL/VU
w(SBEF/ZMPDL/VU
CZG
Pole to J-Bolt Template Assembly Hardware
"%AMS
#*1
CUA
w/ZMPDL/VU
w/ZMPO$BQ
w6448BTIFS
w-PDL8BTIFS
BCS
Rim to Backboard Assembly Hardware
ABY
"%6
""'
AAA
wYw)FY#PMU
.Y1BOIFBE4DSFX
w'MBU8BTIFS
w/ZMPDL/VU
Qty
1
2
2
6
1
2
4
4
8
4
4
2
8
4
PARTS IDENTIFIER
Parts shown at 10% of Actual Size
AKEY
-PXFS&YUFOTJPO"SN"TTFNCMZ
AKDY
6QQFS&YUFOTJPO"SN
AJRY
(BT4QSJOH
AKZY
ALXY
Net
3JN"TTFNCMZ
AKGY
(BT4QSJOH$PWFS
AEZY
w3FCBS
ALSY
Lifter Arm
AKIY
Lift Handle
AMAY
Rim Cover Plate
AKTY
AEIY
+#PMU5FNQMBUF
+#PMU
AKPY
)FJHIU4UJDLFS
7
PARTS IDENTIFIER
Parts shown at 5% of Actual Size
ALGY
Pole
Part shown at Actual Size
AKXY
AJIY
)BOEMF-PDL#SBDLFU
#BDLCPBSE
Part shown at 25% of Actual Size
CYAY
)BOEMF#SBDLFU
AMOY
5SJHHFS1JO
CXYY
CXZY
Left Cam Plate
3JHIU$BN1MBUF
8
HARDWARE IDENTIFIER
SETUP HARDWARE [CZD]
Hardware shown at Actual Size
AERY
CYVY
AEOY
w)FY/VU
w)FY/VU$PVQMFS
wYw)FY#PMU
HANDLE TO POLE ASSEMBLY HARDWARE [CZE]
Hardware shown at Actual Size
11 1/8”
OPUBDUVBMMFOHUI
CZMY
wYw(SBEF#PMU
AEHY
7 3/8”
w1MBTUJD8BTIFS
OPUBDUVBMMFOHUI
CYCY
CZVY
w-BSHF1PMZ4QBDFS
wYw(SBEF#PMU
DDYY
11 1/8”
wYw4QBDFS
OPUBDUVBMMFOHUI
DDZY
wYw(SBEF#PMU
DFYY
wYw4QBDFS
CZOY
wYw4QBDFS
CYNY
CYFY
CYGY
w/ZMPDL/VU
w(SBEF/ZMPDL/VU
w(SBEF/ZMPDL/VU
CYEY
wYw4QBDFS
9
HARDWARE IDENTIFIER
EXTENSION ARMS TO POLE ASSEMBLY HARDWARE [CZF]
Hardware shown at Actual Size
CYGY
w(SBEF/ZMPDL/VU
CZRY
wYw(SBEF#PMU
14 3/4”
10”
CZPY
/PUBDUVBMMFOHUI
CZTY
OPUBDUVBMMFOHUI
wYw(SBEF#PMU
wYw(SBEF#PMU
CYFY
w(SBEF
/ZMPDL/VU
10 3/4”
OPUBDUVBMMFOHUI
CZWY
wYwYw4QBDFS
CZQY
wYw(SBEF#PMU
CZSY
wYwYw4QBDFS
CYMY
wYw8BTIFS
CZXY
wYwYw4QBDFS
AEGY
w1MBTUJD8BTIFS
AEHY
w1MBTUJD8BTIFS
10
HARDWARE IDENTIFIER
BACKBOARD TO POLE ASSEMBLY HARDWARE [BCR]
Hardware shown at Actual Size
10 3/4”
CZQY
/PUBDUVBMMFOHUI
CYTY
wYw(SBEF#PMU
wYw(SBEF#PMU
CYFY
w(SBEF/ZMPDL/VU
CYGY
CZUY
wYw4QBDFS
AEGY
w(SBEF/ZMPDL/VU
w1MBTUJD8BTIFS
POLE TO J-BOLT ASSEMBLY HARDWARE [CZG]
Hardware shown at Actual Size
ADLY
w/ZMPDL/VU
CUAY
AMSY
w-PDL8BTIFS
w/ZMPO$BQ
BIPY
w6448BTIFS
RIM TO BACKBOARD ASSEMBLY HARDWARE [BCS]
Hardware shown at Actual Size
ADUY
ABYY
wYw)FY#PMU
.YNN
1BOIFBE4DSFX
11
AAFY
AAAY
w'MBU8BTIFS
w/ZMPDL/VU
SEC
1
SETUP
HARDWARE REQUIRED
SETUP HARDWARE [CZD]
Hardware shown at Actual Size
AEOY
wYw)FY#PMU
CYVY
AERY
w)FY/VU$PVQMFS
w)FY/VU
PARTS REQUIRED
Parts shown at 10% of Actual Size
AEZY
w3FCBS
AEIY
+#PMU
AKTY
+#PMU5FNQMBUF
TOOLS USED (NOT INCLUDED)
15/16" Wrench
Y
Carpenter’s Level
Shovel
12
Tape Measure
Cement
ZBSEPS
MCCBHY
15/16”Y
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1
13/16”
OPUBDUVBMTJ[F
AERY
SEC
1.1
AEOY
CYVY
%JHBIPMFwEFFQBOEwTRVBSF5IFFEHFPG
UIFIPMFTIPVMECFnVTIXJUIUIFFEHFPGUIFQMBZJOH
DPVSU *G ZPV MJWF JO BO BSFB XIFSF GSPTU IFBWFT
NBZ QPTF B QSPCMFN DPOTVMU ZPVS MPDBM CVJMEJOH
JOTQFDUPSUPEFUFSNJOFUIFBQQSPQSJBUFIPMFEFQUI
#FMMPVUUIFCPUUPNPGUIFIPMFBTJMMVTUSBUFE8F
SFDPNNFOECVJMEJOHBGPSNUPLFFQUIFUPQPGUIF
DPODSFUFTUSBJHIUBOETRVBSF1MBDFUIFGPSNTPJU
JTMFWFMXJUIUIFQMBZJOHTVSGBDF
SEC
5ISFBE B 5/8” Hex Nut (AER) BMM UIF XBZ POUP FBDI
J-Bolt (AEI)4MJEFUIFUISFBEFEFOETPGUIF+#PMUT
UISPVHIUIFDPSOFSIPMFTJOUIFJ-Bolt Template (AKT)
BOETFDVSFUIFNDPNQMFUFMZXJUI5/8” Hex Nuts (AER).
*OTFSUUIF5/8” x 2” Hex Bolt (AEO)UISPVHIUIFDFOUFS
IPMF JO UIF +#PMU 5FNQMBUF BOE UJHIUFO UIF Nut
Coupler (CYV)POUPUIF#PMUBTGBSBTJUXJMMHP
1.2
AER
AEI
AER
w
AEO
AKT
w
CYV
w
AER
AEI
CAUTION
#FGPSFEJHHJOHDBMMUPMPDBUFBOZCVSJFEVUJMJUZMJOFT
!
Note: There must be a 3-foot area behind the pole
to allow the user to adjust the Rim height.
!
13
Note: Make sure the curved ends of the J-Bolts
are in a rectangular pattern as shown.
(Not to scale)
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1
NO HARDWARE REQUIRED FOR THIS PAGE
MC#BHY
SEC
1.3
*GZPVBSFVTJOHDPODSFUFNJYNJYUIFDPODSFUF
BDDPSEJOHUPUIFJOTUSVDUJPOTPOUIFCBHTPlease
note that a thicker mix of concrete will dry stronger.
1PVSUIFDPODSFUFJOUPUIFIPMFTUPQQJOHBCPVU
JODIFTGSPNUIFUPQPGUIFIPMF
SEC
1.4
1VTIUIFGPVSQJFDFTPG36” Rebar (AEZ)mSNMZUPUIF
CPUUPNPGUIFIPMF5IF3FCBSTIPVMECFBSSBOHFE
JOBTRVBSFBCPVUJODIFTXJEFJOUIFDFOUFSPG
UIFIPMFTPFBDIQJFDFXJMMCFOFYUUPUIF+#PMUT
XIFOUIFZBSFQMBDFEJOUIFDFNFOU
'JOJTImMMJOHUIFIPMFUPUIFUPQXJUIDPODSFUF5IF
UPQPGUIFDPODSFUFTIPVMESFBDIBCPVUwBCPWF
UIFQMBZJOHTVSGBDFBOETMPQFEPXOUPXBSEUIF
QMBZJOHTVSGBDFUPBMMPXXBUFSSVOPGG
$FOUFSUIFJ-Bolt Template (AKT)PWFSUIFIPMFThe front
of the Template is the side with the Nut Coupler (CYV) and
should be toward the playing surface.
*OTFSUUIFJ-Bolts (AEI)JOUPUIFDPODSFUFBOEBHJUBUFUIF
5FNQMBUFBTTFNCMZUPFMJNJOBUFBOZBJSCVCCMFT
1VTIUIF+#PMUTJOUPUIFDFNFOUVOUJMUIF5FNQMBUF
JTSFTUJOHnBUBHBJOTUUIFDFNFOU'PSNUIFDFNFOU
JOUPBEPXOXBSETMPQFUPXBSEUIFQMBZJOHTVSGBDF
to allow water runoff. The lower four 5/8” Hex Nuts (AER)
and the Nut Coupler will be in the concrete permanently.
$MFBOPGGBOZDPODSFUFPOUIF+#PMU5FNQMBUFPSUIF
FYQPTFEQPSUJPOPGUIF+#PMUT6TJOHBDBSQFOUFST
MFWFMNBLFTVSFUIF5FNQMBUFJTTRVBSFUPUIFQMBZJOH
TVSGBDF1MBUFTIPVMECFMFWFMBOEBCPVUwBCPWF
UIFQMBZJOHTVSGBDFGPSXBUFSUPESBJOPGGPGUIFTUFFM
AKT
AER
CYV
AEZ
AEI
18”
Playing surface
!
14
Note: You are now finished with the initial assembly steps. DO
NOT PROCEED WITH THE ASSEMBLY until the concrete has fully
cured. Curing will take a minimum of 72 hours (3 days). In
humid climates or wet weather, allow additional time for the
concrete to cure. Never use the system without first following
the cementing instructions.
SEC
2
HANDLE TO POLE ASSEMBLY
HARDWARE REQUIRED
HANDLE TO POLE ASSEMBLY HARDWARE [CZE]
Hardware shown at Actual Size
11 1/8”
DDYY
OPUBDUVBMMFOHUI
wYw4QBDFS
CZMY
wYw(SBEF#PMU
7 3/8”
OPUBDUVBMMFOHUI
CYCY
CZVY
w-BSHF1PMZ4QBDFS
wYw(SBEF#PMU
11 1/8”
OPUBDUVBMMFOHUI
DDZY
AEHY
wYw(SBEF#PMU
w1MBTUJD8BTIFS
CZOY
CYEY
wYw4QBDFS
wYw4QBDFS
CYNY
CYFY
CYGY
w/ZMPDL/VU
w(SBEF/ZMPDL/VU
w(SBEF/ZMPDL/VU
15
DFYY
wYw4QBDFS
SEC
2
HANDLE TO POLE ASSEMBLY
PARTS REQUIRED
Part shown at 5% of Actual Size
ALGY
Pole
Parts shown at 10% of Actual Size
AJRY
(BT4QSJOH
AKGY
(BT4QSJOH$PWFS
AKIY
ALSY
Lift Handle
Lifter Arm
Parts shown at 25% of Actual Size
Part shown at Actual Size
CYAY
)BOEMF#SBDLFU
AMOY
5SJHHFS1JO
AKXY
)BOEMF-PDL#SBDLFU
TOOLS USED (NOT INCLUDED)
1/2" Wrench
3/8" Allen Wrench
3/4" Wrench
15/16" Wrench
1/4" Allen Wrench
16
Rubber Mallet
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
2
11 1/8”
3/4"
OPUBDUVBMTJ[F
3/8"
CZOY
CZMY
OPUBDUVBMMFOHUI
CYFY
SEC
2.1
"UUBDIUIFHandle Brackets (CYA)UPUIFPole (ALG)5JHIUFOUIFIBSEXBSFVOUJMUIF1/2” x 1 5/8” Spacers (CZO)BSFTOVH
UPUIFQPMFCVUDBOTUJMMTQJOXIFOSPUBUFECZIBOE
!
Note: Coat the 1/2” x 11 1/8” Bolt (CZM) lightly with Dark
Lithium Grease (AJZ) before performing this step.
ALG
CZM
CZO
CYA
CZO
CYF
CYA
!
!
Note: DO NOT overtighten the hardware. The Handle Brackets must move freely
around the Bolt. You should be able to rotate the Spacers with your fingers.
17
Note: Make sure each Handle Bracket (CYA) is oriented
so the side of the Bracket with the holes is closest to the
ground.
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
11 1/8”
3/4"
3/8"
OPUBDUVBMTJ[F
CZMY
OPUBDUVBMMFOHUI
CYEY
CYFY
SEC
2.2
!
"UUBDIUIFHandle Assembly (AKI)UPUIF)BOEMF#SBDLFUTVTJOHUIFIBSEXBSFTIPXOJOUIFMPDBUJPOJOEJDBUFE
.BLFTVSFUIF1/2” x 1.44” Spacers (CYE)BSFJOTUBMMFEJOUIFHBQCFUXFFOUIF)BOEMF#SBDLFUBOEUIF)BOEMF
"TTFNCMZ
Note: Coat the 1/2” x 11 1/8” Bolt (CZM) lightly with Dark
Lithium Grease (AJZ) before performing this step.
CYE
CYE
CZM
CYF
AKI
!
Note: DO NOT overtighten the hardware. Make sure the Handle
Assembly is oriented as shown.
18
2
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
2
11 1/8”
3/4"
3/8"
CZMY
OPUBDUVBMMFOHUI
OPUBDUVBMTJ[F
CYEY
CYFY
SEC
2.3
4FDVSFUIF)BOEMF"TTFNCMZUPUIF)BOEMF#SBDLFUTVTJOHUIFIBSEXBSFTIPXOJOUIFTFUPGIPMFTBUUIFFOEPG
UIF)BOEMF#SBDLFUT.BLFTVSFUIF1/2” x 1.44” Spacers (CYE)BSFQMBDFECFUXFFOUIF)BOEMF#SBDLFUTBOEUIF
)BOEMF"TTFNCMZ
CZM
CYE
CYE
CYF
!
Note: Coat the 1/2” x 11 1/8” Bolt (CZM) lightly with Dark
Lithium Grease (AJZ) before performing this step.
!
CYF
Note: DO NOT overtighten the hardware.
SEC
2.4
3FNPWFBMMQBDLBHJOHGSPNUIFGas Springs (AJR)4MJEFUIFGas Spring Cover (AKG)POUPUIF(BT4QSJOHBTJMMVTUSBUFE
MJOJOHVQUIFIPMFTJOUIF(BT4QSJOH$PWFSXJUIUIPTFJOUIFOBSSPXFOEPGUIF(BT4QSJOHRepeat this step for the
remaining Gas Springs and Gas Spring Covers.
AKG
1
2
AJR
!
Note: The Gas Spring Cover will rest loosely on the Gas Spring.
It will be secured to the Gas Spring later in the assembly.
!
Note: To simplify the upcoming steps, it may be helpful to fully extend the Gas Springs. To do so, carefully tap the small
release pin at the larger end of the Gas Spring with a Bolt. Continue tapping repeatedly until the Gas Spring is fully extended.
19
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7 3/8”
1/2"
1/4"
SEC
2.5
CZVY
OPUBDUVBMMFOHUI
CYNY
-JOFVQUIFIPMFTJOUIFGas Spring Cover (AKG) and Gas Spring (AJR)XJUIUIPTFPOUIFQPMFCSBDLFUT4FDVSFUIF
(BT4QSJOHTBOE(BT4QSJOH$PWFSTUPUIF1PMFVTJOHUIFIBSEXBSFTIPXO
Pole Brackets
Line up the holes
CZV
CYN
!
Note: Do NOT overtighten the hardware. The Gas Springs need
to rotate freely on the pole brackets.
20
2
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
SEC
2.6
4MJEFUIFTrigger Pin (AMO)UISPVHIUIFVQQFSTFUPGIPMFTJOUIFGas Springs (AJR).
AJR
AJR
AJR
AMO
21
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
2
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
2
11 1/8”
15/16"
3/8"
DDZY
OPUBDUVBMMFOHUI
CYGY
AEHY
SEC
2.7
DDYY
DFYY
CYCY
OPUTIPXO
BUBDUVBMTJ[F
8IJMFPOFBEVMUIPMETUIFLifter Arms (ALS)JOQMBDFBUUBDIPOFFOEPGUIF-JGUFS"SNTUPUIFHandle Assembly (AKI)
VTJOHUIF5/8” x 11 1/8” Grade 8 Bolt (DDZ).BLFTVSFUPTMJEFUIFHandle Lock Brackets (AKX)BOEUIF4QBDFSTTIPXO
POUPUIF#PMUBTJUQBTTFTUISPVHIUIF)BOEMF#SBDLFU-JGUFS"SNT)BOEMF"TTFNCMZBOE(BT4QSJOHT4FDVSF
UIFIBSEXBSFXJUIB5/8” Grade 2 Nylock Nut (CYG)$BSFGVMMZUBQUIF#PMUJOUPQMBDFXJUIB3VCCFS.BMMFUJGOFDFTTBSZ
!
ALS
Note: Coat the 5/8” x 11 1/8” Bolt (DDZ) lightly with White
Silicone Grease (AKH) before performing this step.
ALS
ALS
AEH
AEH
DDZ
CYG
CYC
CYC
DDY
DDY
DFY
DFY
DDY
AKI
AKX
AKX
CAUTION
6TFPOMZ4JMJDPOF(SFBTFEVSJOHUIJTTUFQ
-JUIJVN(SFBTFNBZEBNBHF(BT4QSJOHT
WARNING
!
Note: If there is difficulty completing this step, loosen the hardware on the Handle Assembly.
After completing this step, retighten the hardware. DO NOT overtighten the hardware. The Handle
must be able to rotate freely. You should be able to rotate the Spacers with your fingers.
22
4MJEF UIF -PDL #SBDLFU PWFS UIF 5SJHHFS 1JO BOE
VTFUIF1BE-PDLQSPWJEFEUPMPDLUIF)BOEMFJO
QMBDF PODF UIJT TUFQ JT DPNQMFUF 'BJMVSF UP MPDL
UIF)BOEMFNBZSFTVMUJOTFSJPVTQFSTPOBMJOKVSZ
SEC
3
EXTENSION ARMS TO POLE ASSEMBLY
HARDWARE REQUIRED
EXTENSION ARMS TO POLE ASSEMBLY HARDWARE [CZF]
Hardware shown at Actual Size
CYGY
w(SBEF
/ZMPDL/VU
CZRY
wYw(SBEF#PMU
14 3/4”
CZPY
CYFY
w(SBEF
/ZMPDL/VU
10”
/PUBDUVBMMFOHUI
CZTY
OPUBDUVBMMFOHUI
wYw(SBEF#PMU
wYw(SBEF#PMU
10 3/4”
OPUBDUVBMMFOHUI
CZQY
wYw(SBEF#PMU
CZWY
wYwYw4QBDFS
CZSY
wYwYw4QBDFS
CYMY
AEGY
CZXY
wYwYw4QBDFS
w1MBTUJD8BTIFS
AEHY
w1MBTUJD8BTIFS
23
wYw8BTIFS
SEC
3
EXTENSION ARMS TO POLE ASSEMBLY
PARTS REQUIRED
Parts shown at 10% of Actual Size
AKEY
-PXFS&YUFOTJPO"SN"TTFNCMZ
AKDY
6QQFS&YUFOTJPO"SN
Parts shown at 25% of Actual Size
CXYY
CXZY
Left Cam Plate
3JHIU$BN1MBUF
TOOLS USED (NOT INCLUDED)
3/4" Wrench
15/16" Wrench
3/8" Allen Wrench
24
Rubber Mallet
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
3
15/16”
14 3/4”
3/8"
CYGY
OPUBDUVBMMFOHUI
CZWY
OPUBDUVBMTJ[F
CZPY
SEC
3.1
Slide a 5/8” x 14 3/4” Bolt (CZP)UISPVHIPOF5/8” x 4.15” Spacer (CZW)UISPVHIUIF1PMFBOEUISPVHIBOPUIFSwY
w4QBDFSBOETFDVSFXJUIUIFB5/8” Grade 2 Nylock Nut (CYG)6TFB3VCCFS.BMMFUJGOFDFTTBSZUPUBQUIF#PMU
into place.
CZP
CZW
CYG
CZW
CAUTION
!
5IF-JGUFS"SNT(ALS) will move freely if left unattended.
5PBWPJEQFSTPOBMJOKVSZPSQSPQFSUZEBNBHFIBWF
POFBEVMUIPMEUIF-JGUFS"SNTJOQMBDFVOUJMUIFZBSF
TFDVSFEUPUIFTZTUFNMBUFSJOUIFBTTFNCMZ
Note: Tighten the Nut (CYG) until it is flush with the
end of the Bolt (CZP).
25
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
3/4”
CYMY
3/8"
CYFY
CZRY
SEC
3.2
"UUBDIUIFLeft Cam Plate (CXY)BOEUIFRight Cam Plate (CXZ)UPUIFFOEPGUIF-PXFS&YUFOTJPO"SNTVTJOHUIFIBSEXBSF
TIPXO.BLFTVSFUIF$BN1MBUFTBSFQPTJUJPOFEBTQJDUVSFE
CZR
CZR
CXZ
CXY
CYM
CYM
CYF
26
CYF
3
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
3/8"
14 3/4”
CYGY
OPUBDUVBMTJ[F
OPUBDUVBMTJ[F
AEHY
OPUBDUVBMMFOHUI
15/16
SEC
3.3
CZXY
CZPY
"UUBDIUIF-PXFS&YUFOTJPO"SN"TTFNCMZUPUIF1PMFVTJOHUIFIBSEXBSFTIPXO.BLFTVSFUPQMBDFB5/8” x 1” x 1 7/8”
Spacer (CZX) POCPUITJEFTPGUIF1PMFJOCFUXFFOUIF-PXFS&YUFOTJPO"SNBOEUIF1PMF
CZP
AEH
CZX
CZX
AEH
CYG
!
Note: Coat the 5/8” x 14 3/4” Bolt (CZP) lightly with Dark
Lithium Grease (AJZ) before performing this step.
27
3
3/8"
CZSY
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
OPUBDUVBMTJ[F
10 3/4”
OPUBDUVBMTJ[F
CZQY
OPUBDUVBMMFOHUI
SEC
3.4
AEHY
CYGY
15/16”
4FDVSFUIFLifter Arms (ALS)UPUIFLower Extension Arm Assembly (AKE)VTJOHUIFIBSEXBSFTIPXO.BLFTVSFUIF
5/8” x 3/4” x 7 1/4” Spacer (CZS)JTCFUXFFOUIFUXP-JGUFS"SNT.BLFTVSFPOF5/8 Plastic Washer (AEH)JTQMBDFE
CFUXFFOFBDI$BN1MBUFBOE-JGUFS"SNBTJMMVTUSBUFE
AEH
!
AEH
Note: Coat the 5/8” x 10 3/4” Bolt (CZQ) lightly with Dark
Lithium Grease (AJZ) before performing this step.
CZQ
CZS
CYG
AKE
ALS
ALS
!
Note: Tighten the Nut (CYG) until it is flush with the end of the Bolt (CZQ). After completing this step,
it is no longer necessary to have an adult hold the Lifter Arms in place.
28
ALS
3
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CYFY
3/4”
3/8"
10”
CZTY
OPUBDUVBMMFOHUI
SEC
AEGY
"UUBDICPUIUpper Extension Arms (AKD)VTJOHUIFIBSEXBSFTIPXO
3.5
CZT
AEG
AEG
AEG
AEG
CYF
AKD
AKD
!
Note: Coat the 1/2” x 10” Bolt (CZT) lightly with Dark Lithium
Grease (AJZ) before performing this step.
29
3
SEC
4
BACKBOARD TO POLE ASSEMBLY
HARDWARE REQUIRED
BACKBOARD TO POLE ASSEMBLY HARDWARE [BCR]
Hardware shown at Actual Size
10 3/4”
CZQY
/PUBDUVBMMFOHUI
CYTY
wYw(SBEF#PMU
wYw(SBEF#PMU
CYFY
CYGY
CZUY
wYw4QBDFS
AEGY
w(SBEF/ZMPDL/VU
w1MBTUJD8BTIFS
PARTS REQUIRED
Part shown at 5% of Actual Size
AJIY
#BDLCPBSE
TOOLS USED (NOT INCLUDED)
3/4" Wrench
15/16" Wrench
3/8" Allen Wrench
30
w(SBEF/ZMPDL/VU
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
3/8"
10 3/4”
CZQY
OPUBDUVBMMFOHUI
CZUY
CYGY
15/16”
At least two adults are required to complete assembly. To prevent serious injuries,
the Pole should be held down by one adult at all times.
SEC
"UUBDIUIFLower Extension Arms (AKE)UPUIFBackboard (AJI)VTJOHUIFIBSEXBSFTIPXO
4.1
AJI
CZU
CZQ
CZU
CYG
AKE
31
4
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
3/4”
3/8"
CYTY
CYFY
AEGY
SEC
"UUBDIUIF Upper Extension Arm (AKD)UPUIFBackboard (AJI)VTJOHUIFIBSEXBSFTIPXO
4.2
AKD
AKD
AEG
AEG
CYF
CYT
AEG
AKD
!
Note: Repeat this step to attach the other Upper Extension
Arm to the Backboard.
32
4
SEC
5
POLE TO J-BOLT TEMPLATE ASSEMBLY
HARDWARE REQUIRED
POLE TO J-BOLT ASSEMBLY HARDWARE [CZG]
Hardware shown at Actual Size
CUAY
w-PDL8BTIFS
ADLY
BIPY
w/ZMPDL/VU
w6448BTIFS
PARTS REQUIRED
NO NEW PARTS REQUIRED FOR THIS SECTION
TOOLS USED (NOT INCLUDED)
15/16” Wrench
!
Carpenter’s Level
Note: DO NOT PROCEED with this Section untill the concrete from
Section 1 has been allowed to cure over at least 72 hours (3 days).
33
AMSY
w/ZMPO$BQ
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
5
15/16”
CUAY
BIPY
OPUBDUVBMTJ[F
SEC
4UBDLB5/8” Lock Washer (CUA) and a 5/8” USS Washer (BIP)POUPUIFFYQPTFEFOETPGUIFJ-Bolts (AEI)
5.1
BIP
CUA
AEI
!
SEC
5.2
Note: DO NOT PROCEED untill the concrete from Section 1 has
been allowed to cure over at least 72 hours (3 days).
1PTJUJPOUIF1PMFTPUIFTMPUTJOUIF1PMFQMBUFBSFMJOFEVQXJUIUIFUXP+#PMUTDMPTFTUUPUIFQMBZJOHTVSGBDF
1VTIUIF1PMFQMBUFBHBJOTUUIF#PMUTNBLJOHTVSFUIFTMPUTBSFMJOFEVQFYBDUMZXJUIUIF#PMUTUsing at least six
adultsTMPXMZBOEDBSFGVMMZMJGUUIF1PMFVQTPUIF#PMUTTMJEFUISPVHIUIFTMPUT-JOFVQUIFIPMFTBUUIFCBDLPGUIF
1PMFQMBUFXJUIUIF#PMUTBUUIFCBDLPGUIF+#PMU5FNQMBUFBOETUBOEUIFTZTUFNDPNQMFUFMZWFSUJDBM
WARNING
!
5IF BTTFNCMFE TZTUFN JT WFSZ IFBWZ "U MFBTU
TJYBEVMUTBSFSFRVJSFEUPDPNQMFUFUIFTFTUFQT
,FFQIBOETBOEmOHFSTDMFBSPGQJODIQPJOUT
%POPUQVUIBOETPSmOHFSTCFUXFFOUIF1PMF
BOEUIFNPVOUJOHQMBUFBUBOZUJNF4UBOEUIF
1PMFVQTMPXMZBOEDBSFGVMMZ'BJMVSFUPGPMMPXBMM
PGUIFTFJOTUSVDUJPOTBOEXBSOJOHTDPVMEMFBE
UPQSPQFSUZEBNBHFPSTFSJPVTQFSTPOBMJOKVSJFT
Note: Avoid scraping the holes in the plate over the Bolts,
as this can damage the threads.
34
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
5
15/16”
AMSY
ADLY
BIPY
OPUBDUVBMTJ[F
SEC
5.3
)BWFBUMFBTUmWFQFPQMFTVQQPSUUIF1PMFBT
POFQFSTPOTMJEFTB5/8” USS Washer (BIP) onto to
UIFFOEPGFBDI+#PMUBOETFDVSFUIF1PMFJOUP
QPTJUJPOXJUIB5/8” Nylock Nut (ADL).
SEC
5.4
A MINIMUM OF THREE ADULTS ARE REQUIRED FOR THIS
STEP.)BWFUXPBEVMUTDPOUJOVFTVQQPSUJOHUIF
1PMF6TJOHBDBSQFOUFSTMFWFMPOUIFGBDFBOE
UIFTJEFPGUIF#BDLCPBSEBEKVTUUIF)FY/VUT
CFUXFFOUIF+#PMU5FNQMBUFBOEUIF1PMFQMBUF
VOUJMUIF1PMFQMBUFJTSFTUJOHMFWFMPOBMMGPVS
/VUTXJUIUIF#BDLCPBSEIBOHJOHWFSUJDBM
ADL
BIP
Hex Nuts
SEC
5.5
5JHIUFOUIFGPVSHex Nuts (ADL)BCPWFUIF1PMFQMBUF
VOUJMUIFZBSFTFDVSFBHBJOTUUIFQMBUFNBLJOH
TVSFUIFCBDLCPBSESFNBJOTWFSUJDBM5VSOUIF
center Hex Bolt (AEO)VOUJMJUUPVDIFTUIF1PMFQMBUF
SEC
Place a 5/8” Nylon Cap (AMS)POUPFBDI+#PMU
5.6
AMS
AMS
ADL
AMS
AMS
ADL
ADL
!
AEO
35
Note: Make sure the face and side of the Backboard
are level, and perpendicular to the playing surface.
SEC
6
RIM TO BACKBOARD ASSEMBLY
HARDWARE REQUIRED
RIM TO BACKBOARD ASSEMBLY HARDWARE [BCS]
Hardware shown at Actual Size
ADUY
ABYY
.YNN
1BOIFBE4DSFX
wYw)FY#PMU
AAFY
AAAY
w'MBU8BTIFS
w/ZMPDL/VU
PARTS REQUIRED
Part shown at 10% of Actual Size
ALXY
AMAY
3JN"TTFNCMZ
Rim Cover Plate
AKZY
Net
AKPY
)FJHIU4UJDLFS
TOOLS USED (NOT INCLUDED)
Flathead Screwdriver
9/16” Wrench Y
Ladder Y
36
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
6
9/16”Y
ABYY
AAFY
Y
AAAY
SEC
Slide a 3/8” Flat Washer (AAF) onto to a 3/8” x 1 3/4” Hex Bolt (ABY)%PUIJTGPSUXP8BTIFSTBOE#PMUT
6.1
AAF
SEC
6.2
ABY
8IJMFPOFQFSTPOIPMETUIFRim (ALX)JOQMBDFTMJEFUIF#PMUBOE8BTIFSBTTFNCMJFTGSPNUIFQSFWJPVTTUFQJOUP
UIFUPQTMPUTJOUIF3JN BOEUISPVHIUIFBackboard (AJI)4FDVSFUIFIBSEXBSFXJUI3/8” Flat Washers (AAF) and
3/8”-16 Nylock Nuts (AAA)POUIFSFWFSTFTJEFPGUIF#BDLCPBSEBTTIPXO
ALX
Bolt and Washer
Assembly
Front View
AJI
AAF
AAA
WARNING
6TFFYUSFNFDBVUJPOXIFOTUBOEJOHPOMBEEFSTUP
QFSGPSN BTTFNCMZ TUFQT 'PMMPX BMM XBSOJOHT BOE
DBVUJPOTPOUIFMBEEFS'BJMVSFUPGPMMPXBMMPGUIFTF
JOTUSVDUJPOT BOE XBSOJOHT DPVME MFBE UP TFSJPVT
QFSTPOBMJOKVSZPSQSPQFSUZEBNBHF
Rear View
37
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
6
9/16”Y
ABYY
AAFY
AAAY
SEC
6.3
4MJEFUIF3/8” x 1 3/4” Hex Bolt (ABY) and 3/8” Flat Washer (AAF)JOUPUIFNJEEMFIPMFJOUPUIF3JN"TTFNCMZBOEUISPVHI
UIF#BDLCPBSE4FDVSFUIFIBSEXBSFXJUIBOPUIFSw'MBU8BTIFSBOEB3/8” Nylock Nut (AAA)POUIFCBDLTJEFPGUIF
#BDLCPBSEBTTIPXO
ABY
AAF
AAF
AAA
Rear View
38
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9/16”
ADUY
SEC
"EKVTUUIFUFOTJPOPGUIFRim (ALX)CZUJHIUFOJOHUIF/VUTBUUIFCPUUPNPGUIF4QSJOHTXJUIB8SFODI
6.4
ALX
!
SEC
Note: DO NOT COMPLETELY TIGHTEN THE NUTS IN THIS STEP!
Only tighten the Nuts until the Rim does not wobble.
Nuts
"UUBDIRim Cover Plate (AMA)UPUIF3JN VTJOHUIFIBSEXBSFTIPXO
6.5
ADU
ADU
AMA
39
6
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
6
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
SEC
6.6
3BJTFUIF#BDLCPBSEVOUJMUIFUPQPGUIF3JNJTGFFUw
BCPWFUIFQMBZJOHTVSGBDF6TFBQFODJMUPNBSL
XIFSFUIFCPUUPNPGPOFPGUIFGas Spring Covers (AKG)NFFUTUIFGas Spring (AJR)BTTIPXO3FNPWFBCPVUBOJODIPG
CBDLJOHGSPNUIFUPQPGUIFHeight Sticker (AKP)4RVFF[FPOFPGUIF(BT4QSJOH$PWFSTUPBMMPXSPPNGPSUIF)FJHIU
4UJDLFSBOEBQQMZUIF4UJDLFSUPUIFCBDLPGUIF(BT4QSJOHMJOJOHVQUIFMJOFXJUIUIFQFODJMNBSLPOUIF(BT
4QSJOH1SFTTUIF4UJDLFSJOUPQMBDFXIJMFTMPXMZSFNPWJOHUIFSFTUPGUIFCBDLJOHUPQSFWFOUXSJOLMFTJOUIF4UJDLFS
AKG
Squeeze
here
Squeeze
here
AKP
AJR
!
SEC
Note: Height Sticker (AKP) may be different than the one shown here.
3FNPWFUIFQSPUFDUJWFDPWFSJOHGSPNUIFCBDLCPBSEBOEBUUBDINet (AKZ)UPUIFRim (ALX).
6.7
ALX
AKZ
!
Note: If a replacement Net is needed, please call our Customer Service Department. Our Nets
are shorter than average to reduce the risk of entanglement.
40
SEC
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
6
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
SEC
6.8
"QQMZHSFBTFHFOFSPVTMZGSPNUIFWhite Silicone Grease Packet (AKH)UPUIFTrigger Pin (AMO)BOEUIF3FMFBTF1JOTPO
FBDIGas Spring (AJR)BTTIPXO
Apply White Silicone
Grease to the
Release Pins
AJR
AJR
AJR
Apply White Silicone
Grease to the Trigger Pin
AMO
CAUTION
6TFPOMZ4JMJDPOF(SFBTFEVSJOHUIJTTUFQ
-JUIJVN(SFBTFNBZEBNBHF(BT4QSJOHT
41
SEC
7
REMOVING THE BACKBOARD
DISASSEMBLE THE SYSTEM
In the event the Backboard should need replacing, please follow the instructions below. Never remove the Backboard from the
system without first dissasembling the system as instructed. At least six adults are required to complete the following steps:
SEC
3FNPWFUIF5/8” Nylon Caps (AMS)GSPNFBDI+#PMU
7.1
SEC
AMS
Remove 5/8” Flat Washers (BIP) and 5/8” Nylock Nuts (ADL)GSPNFBDI+#PMU
7.2
ADL
BIP
SEC
6TFBMMTJYQFPQMFBOEDBSFGVMMZMPXFSUIFTZTUFNUPUIFHSPVOE
7.3
!
SEC
7.4
Note: Place cardboard or other cushioning material between the
backboard and the ground.
t3FNPWFUIFIBSEXBSFUIBUBUUBDIFTUIF&YUFOTJPO"SNTUPUIF#BDLCPBSE
t3FWFSTFUIFTUFQTJO4FDUJPOUPDBSFGVMMZSFNPWFUIF#BDLCPBSE
GSPNUIFTZTUFN
t#FJOHDBSFGVMPGUIFHMBTTSFWFSTFUIFTUFQTJO4FDUJPOUP
SFNPWFUIFSJNGSPNUIFCBDLCPBSE
t4FUBTJEFUIF3JNBOEBMMIBSEXBSFGPSSFBTTFNCMZXJUIB
SFQMBDFNFOUCBDLCPBSE
t'PMMPX4FDUJPOTPGUIJTNBOVBMUPSFBTTFNMFUIFTZTUFNXJUIB
OFX#BDLCPBSE
42
WARNING
5IF BTTFNCMFE TZTUFN JT WFSZ IFBWZ "U MFBTU
TJYBEVMUTBSFSFRVJSFEUPDPNQMFUFUIFTFTUFQT
,FFQIBOETBOEmOHFSTDMFBSPGQJODIQPJOUT
%POPUQVUIBOETPSmOHFSTCFUXFFOUIF1PMF
BOEUIFNPVOUJOHQMBUFBUBOZUJNF4UBOEUIF
1PMFVQTMPXMZBOEDBSFGVMMZ'BJMVSFUPGPMMPXBMM
PGUIFTFJOTUSVDUJPOTBOEXBSOJOHTDPVMEMFBE
UPQSPQFSUZEBNBHFPSTFSJPVTQFSTPOBMJOKVSJFT
OPERATION OF HEIGHT ADJUSTMENT SYSTEM
5IFCBTLFUCBMMTZTUFNNBZCFBEKVTUFEGSPNGFFUUPGFFU
503"*4&03-08&35)&)001
B (SBTQUIF)BOEMF"TTFNCMZmSNMZBOEQSFTTUIF)BOEMFEPXOXBSEUPSBJTFUIFIPPQ.PWFUIFIBOEMFVQXBSEUPMPXFS
UIFIPPQ
C 0ODFUIFTZTUFNIBTCFFOTFUBUUIFEFTJSFEIFJHIUZPVNBZVTFUIFPad Locks (ALC)UPQSFWFOUJUGSPNCFJOHBEKVTUFE3PUBUF
CPUIHandle Lock Brackets (AKX)TPUIFZTMJEFPWFSUIFTrigger Pin (AMO).-PPQFBDI1BE-PDLUISPVHIPOFPGUIFIPMFTJOFBDI
)BOEMF-PDL#SBDLFU
Hole in Handle
Lock Brackets
!
Note: If there is difficulty adjusting the system height, loosen the four Bolts on the Handle
Assembly. DO NOT overtighten the hardware. The Handle must be able to rotate on the pole.
You should be able to rotate the Spacers with your fingers.
POLE CARE AND SYSTEM MAINTENANCE
5IFMJGFPGZPVSCBTLFUCBMMTZTUFNEFQFOETPONBOZWBSJBCMFT5IFDMJNBUFFYQPTVSFUPDPSSPTJWFTTVDIBTTBMUQFTUJDJEFTPS
IFSCJDJEFTBOEFYDFTTJWFVTFPSNJTVTFDBOBMMDPOUSJCVUFUPQPMFGBJMVSFXIJDINBZDBVTFQSPQFSUZEBNBHFPSQFSTPOBMJOKVSZ
$IFDLZPVSCBTLFUCBMMTZTUFNGSFRVFOUMZGPSMPPTFIBSEXBSFFYDFTTJWFXFBSBOETJHOTPGDPSSPTJPO'PSTBGFUZSFBTPOTBOE
UPQSPMPOHUIFMJGFPGZPVSCBTLFUCBMMTZTUFNZPVNVTUUBLFUIFGPMMPXJOHQSFWFOUJWFNFBTVSFT
B $IFDLBMM/VUTBOE#PMUT*GBOZBSFMPPTFUJHIUFOUIFN
C $IFDLBMMQBSUTGPSFYDFTTJWFXFBSBOEUFBS*GOFDFTTBSZSFQMBDFBOZQBSUTUIBUIBWFCFFOXPSOPSEBNBHFEUISPVHIVTBHF
$POUBDUPVS$VTUPNFS4FSWJDF%FQBSUNFOUGPSSFQMBDFNFOUQBSUT
D *OTQFDUUIF8BSOJOH4UJDLFSPOUIFQPMF*GJUJTSJQQFEGBEFEPSJMMFHJCMFDBMMPVS$VTUPNFS4FSWJDF%FQBSUNFOUUPSFRVFTU
BSFQMBDFNFOU4UJDLFS
E $IFDLBMM1PMFTFDUJPOTGPSWJTJCMFSVTUPSDIJQQFEPSDSBDLFEQBJOU*GFJUIFSBSFQSFTFOUEPUIFGPMMPXJOH
6TFBOFNFSZDMPUIUPDPNQMFUFMZSFNPWFBOZSVTUPSDIJQQFEQBJOU
$MFBOUIFBSFBXJUIBEBNQDMPUIBOEBMMPXJUUPESZ
"QQMZUXPDPBUTPGBSVTUQSFWFOUBUJWFIJHIHMPTTFOBNFMQBJOUUPUIFBSFB"MMPXUIFQBJOUUPESZCFUXFFODPBUT
IF RUST HAS PENETRATED THROUGH THE POLE ANYWHERE, REPLACE IT IMMEDIATELY!
43
WARNING
t'BJMVSFUPDPNQMZXJUIUIFTFXBSOJOHTDPVMESFTVMUJOCSPLFOCPOFTDVUT
OFSWFEBNBHFTQJOBMDPSEPSCSBJOJOKVSZPSEFBUI
t%0/05BMMPXDIJMESFOUPBEKVTUUIFVOJU
t%0/05)"/('30."/:1"350'5)&6/*5JODMVEJOHUIFCBDLCPBSE
TVQQPSUCSBDFTSJNPSOFU)BOHJOHGSPNUIFTZTUFNNBZDBVTFJOKVSJFTTVDI
BTUIPTFMJTUFEBCPWFEBNBHFUIFVOJUBOEWPJEUIFQSPEVDUXBSSBOUZ
t%0/05TMJEFDMJNCPSQMBZPOUIFQPMF,FFQPSHBOJDNBUFSJBMBXBZGSPN
UIFQPMFCBTF(SBTTMJUUFSFUDDPVMEDBVTFDPSSPTJPOBOEPSEFUFSJPSBUJPO
t%0/05VTFUIFTZTUFNUPMJGUPSIPJTUBOZUIJOH5IFHBTTQSJOHJTEFTJHOFE
UPMJGUPOMZUIFXFJHIUPGUIFCBDLCPBSEBOESJN%0/05IBOHBOZUIJOHGSPN
UIFIBOEMFSJNCBDLCPBSEPSMJGUFSBSNTBTUIJTXJMMEBNBHFUIFTZTUFNBOE
WPJEUIFQSPEVDUXBSSBOUZ
t*OTQFDUUIFVOJUCFGPSFFBDIVTFGPSMPPTFIBSEXBSFFYDFTTJWFXFBSBOE
TJHOTPGDPSSPTJPOBOESFQBJSCFGPSFVTF1BZQBSUJDVMBSBUUFOUJPOUPUIFBODIPS
IBSEXBSF
t$IFDLQPMFTZTUFNUXJDFBZFBSGPSTJHOTPGDPSSPTJPOSVTUQJUUJOHDIJQQJOH
BOE SFQBJOU XJUI FYUFSJPS FOBNFM QBJOU *G SVTU IBT QFOFUSBUFE QPMF PS BOZ
DPNQPOFOUSFQMBDFEBNBHFEQBSUTJNNFEJBUFMZ*OTQFDUUIFHBTTQSJOHGPS
WJTJCMFTJHOTPGPJMBOZXIFSFPOUIFTQSJOH*GPJMJTGPVOESFQMBDFHBTTQSJOH
JNNFEJBUFMZ5IPSPVHIMZJOTQFDUBMMXFMETGPSTJHOTPGSVTUPSXFMEGBJMVSF
t$IFDLUIFVOJUCFGPSFFBDIVTFGPSTUBCJMJUZ
t6TFDBVUJPOXIFOQFSGPSNJOHEVOLUZQFBDUJWJUJFTPOUIJTVOJU
t"MMQMBZFSTNVTUXFBSBNPVUIHVBSEXIJMFQMBZJOHDMPTFUPUIFOFU%VSJOH
QMBZVTFFYUSFNFDBVUJPOUPLFFQFBDIQMBZFSTGBDFBXBZGSPNUIFCBDLCPBSE
SJNBOEOFU4FSJPVTJOKVSZDBOPDDVSJGUFFUIGBDFDPNFJODPOUBDUXJUIUIF
CBDLCPBSESJNPSOFU
t%0/05XFBSKFXFMSZSJOHTXBUDIFTOFDLMBDFTFUD
XIJMFVTJOHUIFTZT
UFN4FSJPVTQFSTPOBMJOKVSZNBZPDDVSJGKFXFMSZJTDBVHIUPOUIFSJNPSOFU
OWNERS MUST ENSURE THAT ALL PLAYERS KNOW AND FOLLOW THESE RULES FOR
SAFE OPERATION OF THIS UNIT.
ADJUSTING SYSTEM HEIGHT
503"*4&03-08&35)&(0"-(3"41"%+645.&/5)"/%-&
'*3.-:"/%3"*4&03-08&3(0"-8)&/5)&%&4*3&%)&*()5
*43&"$)&%3&-&"4&"%+645.&/5)"/%-&
CUSTOMER SERVICE
(USA/CANADA ONLY)
1-800-225-3865
10/07/2011
Made in China
44
Part # 1103320
ENHANCE YOUR LIFETIME® PURCHASE BY ADDING ACCESSORIES OR OTHER GREAT PRODUCTS:
To purchase accessories or other Lifetime Products, visit us at:
www.lifetime.com
Or call: 1-800-424-3865
45
WARRANTY INFORMATION
LIFETIME BASKETBALL EQUIPMENT
LIMITED LIFETIME FACTORY WARRANTY
THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE.
-JGFUJNFCBTLFUCBMMTZTUFNTBSFXBSSBOUFEUPUIFPSJHJOBMQVSDIBTFSUPCFGSFFGSPNEFGFDUTJONBUFSJBMPSXPSLNBOTIJQGPS
UIFEVSBUJPOPGPXOFSTIJQCZUIFPSJHJOBMSFUBJMQVSDIBTFS5IFXPSEiEFGFDUTwJTEFmOFEBTJNQFSGFDUJPOTUIBUJNQBJSUIFVTF
PGUIFQSPEVDU%FGFDUTSFTVMUJOHGSPNNJTVTFBCVTFPSOFHMJHFODFXJMMWPJEUIJTXBSSBOUZ5IJTXBSSBOUZEPFTOPUDPWFSEFGFDUT
EVFUPJNQSPQFSJOTUBMMBUJPOBMUFSBUJPOPSBDDJEFOU5IJTXBSSBOUZEPFTOPUDPWFSEBNBHFDBVTFECZWBOEBMJTNSVTUJOHiBDUT
PGOBUVSFwPSBOZPUIFSFWFOUCFZPOEUIFDPOUSPMPGUIFNBOVGBDUVSFS
5IJTXBSSBOUZEPFTOPUDPWFSCSFBLBHFPGUIFUFNQFSFEHMBTTQMBZJOHTVSGBDF
5IJTXBSSBOUZJTOPOUSBOTGFSBCMFBOEJTFYQSFTTMZMJNJUFEUPUIFSFQBJSPSSFQMBDFNFOUPGEFGFDUJWFCBTLFUCBMMFRVJQNFOU*GUIF
FRVJQNFOUJTEFGFDUJWFXJUIJOUIFUFSNTPGUIJTXBSSBOUZ-JGFUJNF1SPEVDUT*ODXJMMSFQBJSPSSFQMBDFEFGFDUJWFQBSUTBUOPDPTU
UPUIFQVSDIBTFS4IJQQJOHDIBSHFTUPBOEGSPNUIFGBDUPSZBSFOPUDPWFSFEBOEBSFUIFSFTQPOTJCJMJUZPGUIFQVSDIBTFS-BCPS
DIBSHFTBOESFMBUFEFYQFOTFTGPSSFNPWBMJOTUBMMBUJPOPSSFQMBDFNFOUPGUIFCBTLFUCBMMTZTUFNPSJUTDPNQPOFOUTBSFOPUDPWFSFE
VOEFSUIJTXBSSBOUZ
5IJTXBSSBOUZEPFTOPUDPWFSTDSBUDIJOHPSTDVGmOHPGUIFQSPEVDUUIBUNBZSFTVMUGSPNOPSNBMVTBHF*OBEEJUJPOEFGFDUT
SFTVMUJOHGSPNJOUFOUJPOBMEBNBHFOFHMJHFODFVOSFBTPOBCMFVTFPSIBOHJOHGSPNUIFOFUPSSJNXJMMWPJEUIJTXBSSBOUZ
-JBCJMJUZGPSJODJEFOUBMPSDPOTFRVFOUJBMEBNBHFTJTFYDMVEFEUPUIFFYUFOUQFSNJUUFECZMBX8IJMFFWFSZBUUFNQUJTNBEFUP
FNCPEZUIFIJHIFTUEFHSFFPGTBGFUZJOBMMFRVJQNFOUGSFFEPNGSPNJOKVSZDBOOPUCFHVBSBOUFFE5IFVTFSBTTVNFTBMMSJTLPG
JOKVSZSFTVMUJOHGSPNUIFVTFPGUIJTQSPEVDU"MMNFSDIBOEJTFJTTPMEPOUIJTDPOEJUJPOBOEOPSFQSFTFOUBUJWFPGUIFDPNQBOZ
NBZXBJWFPSDIBOHFUIJTQPMJDZ
5IJTQSPEVDUJTOPUJOUFOEFEGPSJOTUJUVUJPOBMPSDPNNFSDJBMVTF-JGFUJNF1SPEVDUT*ODEPFTOPUBTTVNFBOZMJBCJMJUZGPSTVDIVTF
*OTUJUVUJPOBMPSDPNNFSDJBMVTFXJMMWPJEUIFXBSSBOUZ
5IJTXBSSBOUZJTFYQSFTTMZJOMJFVPGBMMPUIFSXBSSBOUJFTFYQSFTTFEPSJNQMJFEJODMVEJOHXBSSBOUJFTPGNFSDIBOUBCJMJUZPS
mUOFTTGPSVTFUPFYUFOUQFSNJUUFECZ'FEFSBMBOETUBUFMBX/FJUIFS-JGFUJNF1SPEVDUT*ODOPSBOZSFQSFTFOUBUJWFBTTVNFT
BOZPUIFSMJBCJMJUZJODPOOFDUJPOXJUIUIJTQSPEVDU5IJTXBSSBOUZHJWFTZPVTQFDJmDMFHBMSJHIUTBOEZPVNBZBMTPIBWFPUIFS
SJHIUTXIJDIWBSZGSPNTUBUFUPTUBUF
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A SALES RECEIPT.
REPORT PRODUCT DEFECTS IN WRITING TO:
-JGFUJNF1SPEVDUT*OD10#PY$MFBSmFME65PSDBMM
.'BNUPQN.45
$BMMPSWJTJUPVS8FCTJUFGPS4BUVSEBZIPVST
1MFBTFJODMVEFZPVSEBUFETBMFTSFDFJQUBOEQIPUPHSBQITPGEBNBHFEQBSUT
To register the product, visit our Web site at www.lifetime.com
www.lifetime.com
46