docoverhead attachment solutions overhead attachment solutions
download 
Report Transcription
overhead attachment solutions overhead attachment solutions
OVERHEAD CONCRETE ATTACHMENT METAL DECK SOLUTIONS WOOD • Saves Labor • Extendable • Customizable BUY AMERICAN ACT COMPLIANT CONSTRUCTION ENGINEERED ATTACHMENT SOLUTIONS A Division of Tomarco Contractor Specialties ceasattachments.com (877) GOO-CEAS (877) 466-2327 OVERHEAD ATTACHMENT SOLUTIONS Innovation Since 1977 Table of Contents CONCRETE METAL DECK WOOD PG 2-4 PG 5-6 PG 7-8 Overhead Attachment Solutions Follow the color code for your application Pole Tools Pre-assembled Attachments Power Tool Poles 1) Concrete Powder Puff Pole (CEAS Exclusive) 9 Pin and Clip Assemblies 16 Black Adder Sectional Poles 9 Wedge Bolt Assembly 16 Powers DX350 Pole 10 Tie Wire Wedge/Spike/Sleeve Anchors 16 Ramset D45/D60 Pole 10 45˚ and 90˚ Angle Clips 16 SA270 Pole 10 Ramset Universal Pole 10 2) Metal Deck Ramset Viper Pole 10 Eyewire Assemblies and Metal Eye Lags Rotohammer Pole 11 17 HWH Self Drilling Screw with Clip Tie Wire Wedge/Spike Install Tool 11 17 Pre-pour Drop Wire Assemblies Wedge Anchor Install Tool 11 17 45˚ and 90˚ Seismic Angle Clips Powers C3/C5 and C4 Poles 12 17 Bar Joist Pull Down Clip Trakfast Pole 12 17 Hammer-on Beam Clamp 17 Z-Purlin Clip 17 Assembly Installation Tool Poles Eye Wire Pole (CEAS Exclusive) 13 Hex Driver Pole 13 Keyless Chuck Pole 13 Standard Eye Lag Pole 13 Stiffy Installation Pole (CEAS Exclusive) 14 Impact Pole 14 Miscellaneous 1 Metal Deck Punch Pole 15 Threadfirst 15 3) Wood/Glue-Lam Timberpin Assembly (CEAS Exclusive) 18 Eyewire Assemblies and Wood Eye Lags 18 Looking for Stiffy Supports? Please refer to the Stiffy Catalog or visit us online at www.ceasattachments.com Featuring Exclusive PowderPuff - Powder Actuated Tool CONCRETE SOLUTIONS Powder Actuated Tool & Accessories NOISE No noise! • The first noise suppressed powder actuated tool in the industry. • Tool can be used in or near occupied spaces without disrupting the tenant enabling the contractor to work during normal business hours. Exceptional Driveability • The sealed barrel directs the complete force of the load and fastener to the front of the tool. • The standoff spacer positions the fastener closer to the piston increasing muzzle velocity reducing fishhooks and spalling. Safety • The unique loading sequence enables the user to insert a fastener into the tool without a live load in the chamber. • The load advances into the firing position only when the tool is depressed against the work surface. Online licensing available at ceasattachments.com PICTURED Telescoping pole with integrated trigger assembly Just depress the tool against the work surface to actuate 2 CONCRETE SOLUTIONS Telescoping Poles • Eliminates the need for ladders, scaffolds or scissor lifts • Up to 24’ reach in 2 or 3 stage sections • Saves labor • Increases productivity • Versatile PICTURED Telescoping Sniper or Viper Pole Pg-10 Power Tool Poles • Saves labor, extendable and customizable • Safer, faster and easier then ladders, scaffolding or scissor lifts • Reduces exposure to close-up dust and noise • Better leverage reduces back and shoulder pain • Sectional poles break down and store easily in gang boxes Cradle solutions fit most major brand tools See Pages 9-12 for all cradle options Sectional Poles - Pg-9 3 Overhead Shooting, Drilling and Anchoring for Concrete 1 Drill Using Roto Hammer Pole Tool 2 Set Wedge Anchor with Driver Head 3 Tighten with Impact Pole Tool Roto Hammer Pole CEAS Exclusive Hex Driver Tool PICTURED Roto Hammer Pole Pg-11 PICTURED Impact Pole Pg-14 PICTURED Socket Driver Using a Torque Wrench Shank Drive Also Available Tie Wire Wedge Accessories See Pg-11 Concrete Attachments Pg-16 Pre-assembled Pin and Ceiling Wires Concrete Wedge Anchor Concrete Tie Spike Anchor Concrete Wedge Bolt 4 METAL DECK METAL DECK SOLUTIONS CEAS Exclusive Installation Pole The Outer Pole Remains Stationary Features Support Arms Provide Alignment • Cut labor costs in metal deck ceilings with the Stiffy installation tool • Poles available up to 12’ for easy installation from the ground floor • The outer pole with support arms remains stationary while the inner pole rotates freely to install the fastener. • Hex shank fits all 1/2” electric and cordless drills • Safer, faster and easier then ladders, scaffolding or scissor lifts • Better leverage reduces back and shoulder pain Telescoping Poles CEAS Exclusive Pre-tied Eye Wire Pole - Pg-13 Hex Driver Pole - Pg-13 Universal Keyless Chuck Pole - Pg-13 Eye Lag Pole - Pg-13 Metal Attachment Solutions Pg-17 Pre-assembled Eyewire Self-drilling Ceiling Wires 5 Pre-assembled Hex Driver Self-drilling Ceiling Wires Metal Deck Attachments & Drop-in for Pre-Pour Concrete Drop-in Pre Pour Concrete PICTURED Deck Punch Pole Tool Pg-15 1) Deck Punch Tool 2) Drop-in Wire Pre-pour Metal Deck Drop-in Pg-17 Lathers Channel Rebar Wrap Single Loop See All Pole Tools Pg-13 Pigtail Loop Butterfly • Saves Labor • Extendable • Customizable 6 WOOD SOLUTIONS CEAS Exclusive Telescoping Pre-tied Wire Pole Features • • • • Patented Telescoping Eyewire® pole tool with 2 and 3 stage systems up to 24’ Reach Installs Threaded Fasteners with Pre-tied Wire or Chain All Common Wire Sizes 12, 10, 9, and 8 Gauge Patented Drivehead with 90º Hex shank fits all 1/2” electric and cordless drills Pie-shaped Opening that Cradles the Pre-assembled Fastener to Drive Straight and Fast • Saves Labor • Safer & Faster Wire Wedge Opening Accepts up to 15 Pre-tied 12 Gauge wires Telescoping 2 stage 3’-6’ 2 stage 6’-12’ 3 stage 6’-18’ 3 stage 8’-24’ 7 Wood and Glue Lam Overhead Attachment Solutions Timber Pin & Clip FAST & EASY Insert the pre-tied Timber Pin assembly into the Powder Puff or other Stud Gun nose piece... then actuate the tool. 2” x 6” Beam 2” x 6” with 5/8” Wall Board Wood Applications Timber Pin assemblies fit the Powder Puff and all Stud Guns with 2-1/2” drive pin capacity. Glu Lam Beam Eyewire and Timber Pin Assemblies Eliminate Inconsistent and Insecure Wraps PICTURED Standard Eye Lag Pole Pg-13 Risk of Broken Eye Lags PICTURED Hex Driver Pole Pg-13 Wood Attachments Pg-18 Timber Pin’s Wood Eye Lag’s 8 POWER TOOL POLES PowderPuff Poles - Also see Pg 2 DESCRIPTION • Exclusively designed for the Patented PowderPuff powder actuated tool. • Select 2 stage 3’- 6’, 6’-12’ • Select 3 stage 6’-18’, 8’-24’ Choose Sectional • Exclusively designed for the Patented PowderPuff powder actuated tool. • Sectional 1-1/2’ Tool Holder Section • Add additional sections as needed Telescoping Poles 2 Stage 3’ - 6’ 2 Stage 6’ - 12’ 3 Stage 6’ - 18’ 3 Stage 8’ - 24’ Sectional - Cradle Only Fixed Length 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length PART # POLPPT36 POLPPT612 POLPPT618 POLPPT824 POLBAPP POLPP4 POLPP6 POLPP8 POLPP10 POLPP12 Special Order Tool Cradle Pg’s 9-12 Choose Telescoping Black Adder Sectional Poles 9 • VERSATILE - Each section has interchangeable coupler thread and custom cradle options fit all major brand tools. • PREVENTS THEFT & DAMAGE - Sectional poles break down to store easily in gang job box storage. • INDUSTRIAL STRENGTH - 3/16” stainless steel push rod has floating center guidance that eliminates field linkage adjustments problems or breakage. Actuator lever and tool holder sections are spring loaded. • SAVES LABOR - Increases productivity, reduces costs, extendable and customizable. • SAFETY - Safer, faster and easier then ladders, scaffolding or scissor lifts, reduces exposure to close-up dust and noise, better leverage reduces back & shoulder pain. DESCRIPTION PART # 1-1/2’ Lever Section 1’ Mid Section 3’ Mid Section 5’ Mid Section Custom Length POLBALEVER POLBAMID1 POLBAMID3 POLBAMID5 Special Order POLBALEVER Sectional 1-1/2’ Cradle Section Telescoping Pole • FEWER CEILING POLES TO INVENTORY - Common actuator lever fits all mid section lengths. Add sections to reach job site height requirements. POLBAMIID1, 3 or 5 To order the PowderPuff Gun Call 877-GOO-CEAS or visit us online www.ceasattachments.com Power Tool Poles for Concrete, Metal and Wood DX-350 Pole Designed for Ramset Cobra, R25; Powers P35s, P3500, PA3500, P3600; Hilti DX350, DX35 D-45/60 Pole Designed for Ramset D45/D60; Powers P60 SA270 Pole Designed for Ramset SA270; Hilti DX36 Ramset Universal Pole Add-on Sections Designed for Ramset SA270, D45A, D60, Rocket; Hilti DX36 Viper Pole Designed for Ramset Viper; Powers Sniper • Select telescoping or fixed length Lever Section DESCRIPTION PART # Sectional - Cradle Only Fixed Length 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLBA350 POLDX3504 POLDX3506 POLDX3508 POLDX35010 POLDX35012 Special Order DESCRIPTION PART # Sectional - Cradle Only Fixed Length 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLBAD45 DESCRIPTION PART # Sectional - Cradle Only Fixed Length 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLBA270 POLD45/604 POLD45/606 POLD45/608 POLD45/6010 POLD45/6012 Special Order POLSA2704 POLSA2706 POLSA2708 POLSA27010 POLSA27012 Special Order DESCRIPTION PART # Sectional - Cradle Only Fixed Length 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLBARAM DESCRIPTION PART # Telescoping Viper 2 Stage 3’ - 6’ 2 Stage 6’ - 12’ 3 Stage 6’ - 18’ 3 Stage 8’ - 24’ Fixed Length Viper 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLRAM4 POLRAM6 POLRAM8 POLRAM10 POLRAM12 Special Order POLTV36 POLTV612 POLTV618 POLTV824 POLV4 POLV6 POLV8 POLV10 POLV12 Special Order 10 POWER TOOL POLES Roto Hammer Pole • CEAS exclusive roto-hammer installaion system - See pg 4 • Universal cradle section fits several rotohammers and can be modified to to fit other shapes - Contact CEAS with your model number to confirm suitability or for a customized tool • Sectional 1-1/2’ Tool Holder Section • Add additional sections as needed • Special Order Custom Lengths Sectional 1 1/2’ Cradle Section • Designed to fit: Makita HR2400, HR2410, HR2470F, DeWalt D25123K, D25012K DESCRIPTION PART # Sectional - Cradle Only Fixed Length 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLMAK POLMAKRH4 POLMAKRH6 POLMAKRH8 POLMAKRH10 POLMAKRH12 Special Order SDS Tie Wire Wedge/Spike Install Tool DESCRIPTION PART # SDS Tie Wire Tool MAKRHTW SDS Wedge Anchor Install Tool 11 DESCRIPTION PART # SDS Wedge Tool 7/16” SDS Wedge Tool 1/2” SDS Wedge Tool 9/16” SDS Wedge Tool 5/8” SDS Wedge Tool 11/16” SDS Wedge Tool 3/4” WAI7/16 WAI1/2 WAI9/16 WAI5/8 WAI11/16 WAI3/4 Shown with pre-assembled Tie Wire Wedge Anchor and Ceiling Wire Shown with pre-assembled Spike Anchor and Ceiling Wire Shown with pre-assembled Wedge Anchor and Ceiling Wire Clip Power Tool Poles for Concrete, Metal and Wood C3/C5 Fuel Cell Pole Designed for Powers C3, C3ST, C5 and C5ST DESCRIPTION Fixed Length Only 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length C4 Fuel Cell Pole Designed for Powers C4, C4EX and C4CZ (Shown) PART # DESCRIPTION POLC34 POLC36 POLC38 POLC310 POLC312 Special Order Fixed Length Only 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length Trakfast Pole Designed for Ramset T3MAG, T3SS, TF1100 PART # DESCRIPTION PART # POLC44 POLC46 POLC48 POLC410 POLC412 Special Order Fixed Length Only 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLT34 POLT36 POLT38 POLT310 POLT312 Special Order 12 ASSEMBLY and INSTALLATION TOOL POLES Assemblies, ceiling wires, and bits are sold separately Telescoping reach for easy installation from the ground! Eyewire Pole DESCRIPTION CEAS Exclusive • Patented Drivehead - Supports 12, 10, 9 and 8 gauge wires • See page 7 for more details PART # Telescoping Eyewire Install Tool 2 Stage 3’ - 6’ POLEW36 2 Stage 6’ - 12’ POLEW612 3 Stage 6’ - 18’ POLEW618 3 Stage 8’ - 24’ POLEW824 • Choose 2 or 3 stage up to 24’ Hex Driver Pole DESCRIPTION • Hex driver for all CEAS hex head metal and wood attach- ments and all pre-assembled ceiling wires and clips with hex head metal and wood screws Telescoping Hex Driver Install Tool 2 Stage 3’ - 6’ POLLAGH36 2 Stage 6’ - 12’ POLLAGH612 3 Stage 6’ - 18’ POLLAGH618 3 Stage 8’ - 24’ POLLAGH824 PART # • Choose 2 or 3 stage up to 24’ Keyless Chuck Pole • Universal keyless chuck for drill heads (Shown with drill bit (not included) • Choose 2 or 3 stage up to 24’ Standard Eye Lag Pole • Ceiling wire and Chain installation tool • Choose 2 or 3 stage up to 24’ Hex shank fits all 1/2” electric, and cordless drills 13 Eye Lag Head 3 Stage Pole Base 2 Stage Pole Base Lynch Pin DESCRIPTION PART # Telescoping Keyless Chuck Install Tool 2 Stage 3’ - 6’ POLMKEY36 2 Stage 6’ - 12’ POLMKEY612 3 Stage 6’ - 18’ POLMKEY618 3 Stage 8’ - 24’ POLMKEY824 DESCRIPTION PART # Telescoping Standard Eye Lag Install Tool 2 Stage 3’ - 6’ POLLAG36 2 Stage 6’ - 12’ POLLAG612 3 Stage 6’ - 18’ POLLAG618 3 Stage 8’ - 24’ POLLAG824 DESCRIPTION PART # Replacement Parts Eye Lag Head 2 Stage Pole Base 3 Stage Pole Base Lynch Pin POLELGH1 POLELGB612 POLELGB618 POLELGLP Install Poles and Tools for Concrete, Metal and Wood Stiffy Installation Pole CEAS Exclusive • Inner pole rotates while the outer sleeve remains stationary • Support arms keep assemblies secure during installation • Hex drive head enables users to make easy adjustments • See page 5 for more details DESCRIPTION PART # Fixed Length Only 4’ Fixed Length Pole 6’ Fixed Length Pole 8’ Fixed Length Pole 10’ Fixed Length Pole 12’ Fixed Length Pole Custom Length POLSTF4 POLSTF6 POLSTF8 POLSTF10 POLSTF12 Special Order A Impact Pole CEAS Custom Order Exclusive • More detail on pg 4 • Custom Order Instructions - Send completed copy of this page to your CEAS distributor A) Select drive socket size B) Select drive option C) Provide overall pole length up to 12’ A B *01 - 7/16” Socket *02 - 1/2” Socket *03 - 9/16” Socket *04 - 5/8” Socket *05 - 11/16” Socket *06 - 3/4” Socket C Part # IMPOL A Option *01 1/2” Square Drive B Option C *02 5/16” Hex Shank Select Length C Option Part number example: IMPOL030108 = 9/16” Socket Head, 1/2” Square Drive, 8’ O.A.L. PICTURED Impact Pole with (*01) Socket Drive using a Torque Wrench B 14 MISCELLANEOUS TOOLS Innovation Since 1977 Metal Deck Punch Tool Pole Drop Punch • For metal deck drop-in ceiling wires before concrete pour • Removable steel end tip • Grips ensure safe operation • Weighted inner pole creates added momentum for penetrating heavier decks DESCRIPTION PART # Deck Punch DECKP Looking for Please refer to the Blue Banger Hanger catalog or call 877-GOO-CEAS Threadfirst • Easily remove burrs from ends of cut 1/4”, 3/8” and 1/2” threaded rod • Removable “T” handle allows the insert to be used with a cordless drill REMOVABLE “T” HANDLE For drill use Before 15 Threadfirst Tool After CROSS SECTION 1 Tool de-burrs 1/4”, 3/8” and 1/2” ATR DESCRIPTION PART # Threadfirst Tool THRD143812 Pre-tied labor saving solutions! PRE-ASSEMBLED ATTACHMENTS How to Order Wire Assemblies Step 1 - Select the Assembly from Pages 16-18 PT __ __ X Step 2 - Determine the Wire Length Wire Length *Actual pre-tied wire lengths are roughly 6” shorter than the length specified due to the wrap Wire Gauge Step 3 - Determine the Wire Gauge (12g typ) Step 4 - Choose Single. Double or Triple Tie 8 Gauge (.162) Typical ultimate capacity = 1440 lbs Add “D” for Double Tie or “T” for Triple Tie to the end of the part number when ordering 9 Gauge (.147) Typical ultimate capacity = 1190 lbs 10 Gauge (.135) Typical ultimate capacity = 800 lbs 12 Gauge (.105) Typical ultimate capacity = 600 lbs 8, 9, 10 and 12 gauge wire typical tensile strength = 70ksi (Meets ASTM A 641 Specs) Part Number Example #1: PT612PP = Pre-Tied, 6’ Long, 12g Wire, CEAS PowderPuff Pin and Clip Part Number Example #2: PT612PPD = Pre-Tied, 6’ Long, 12g Wire, CEAS PowderPuff Pin and Clip, Double Tie Many other manufactured and custom assemblies are available. Contact CEAS for more ordering options! CEAS PowderPuff 1-1/4” Pin and Clip Assembly Part # CEA-PDCM125 Pre-tied Part # CEA-PT_ _ PP Powers 1-1/4” Pin and Clip Assembly Part # POW-50370 Pre-tied Part # PT_ _ P Ramset 1-1/4” Pin and Clip Assembly Part # RAM-SDC125 Pre-tied Part # PT_ _ R Pneutek 1” Pin and Clip Assembly Part # CL1PNEU1 Pre-tied Par # PT_ _ PNE1 1/4” x 1-3/4” Wedge Bolt with 90˚ Clip Assembly Part # AB907206SD* Pre-tied Part # PT_ _ AB907206SD *Other sizes available 1/4” Tie Wire Wedge Anchor Fastener Part # POW-7409 Pre-tied Part # PT_ _ TWW 1/4” Tie Wire Spike Anchor Fastener Part # POW-3759 Pre-tied Part # PT_ _ PS 5/16” Tie Wire Sleeve Anchor Fastener Part # RAM-TW1614 Pre-tied Part # PT_ _ TWS Hilti 1” Pin and Clip Assembly Part # HIL-CC27125 Pre-tied Part # PT_ _ CC27125 45˚ Angle Clip* Part # AB45 Pre-tied Part # PT_ _ 45S (Wire tied to small hole) PT_ _ 45L (Wire tied to large hole) Ramset LADD Pin and Clip Assembly Part # RAM-L652 Pre-tied Part # PT_ _ L652 90˚ Angle Clip* Part # AB90 Pre-tied Part # PT_ _ 90S (Wire tied to small hole) PT_ _ 90L (Wire tied to large hole) *Meets California DSA and OSHPD requirements 16 Many other manufactured and custom assemblies are available. Contact CEAS for more ordering options! METAL DECK SDS-I Sharp Point SDS-II & II-L Self Piercing Metal Thickness Ultimate Load Metal Thickness Ultimate Load 20g 680 lbs 16g 1,000 lbs 25g 400 lbs 18g 860 lbs Pre-assembled Attachments for Metal Decks SDS-III & IV Self Drilling Metal Thickness Ultimate Load 3/16” 2,250 lbs 16g 1,050 lbs 18g 870 lbs Values provided are ultimate. Typical safety factors are 3:1 or 4:1. Consult the project SEOR for the appropriate safety factors. SDS-I Eyewire Designed to penetrate up to two layers of 5/8” GWB Fastener Part # SDSI Eyewire Part # EW_ _ SDSI SDS-II Eyewire Designed to penetrate one layer of 5/8” GWB Fastener Part # SDSII Eyewire Part # EW_ _ SDSII SDS-IIL Eyewire Designed to penetrate up to two layers of 5/8” GWB Fastener Part # SDSIIL Eyewire Part # EW_ _ SDSIIL SDS-III Eyewire Designed to fasten to metal deck and joists Fastener Part # SDSIII Eyewire Part # EW_ _ SDSIII SDS-IV Eyewire Designed to fasten to metal deck and joists Fastener Part # SDSIV Eyewire Part # EW_ _ SDSIV #10 x 3/4” HWH Self Drilling Screw with 90˚ Clip Fastener Part # CL1HWHT1034 Pre-tied Part # PT_ _ CL1HWHT1034 *Other sizes available Drop-in Pre-Pour Applications Single Loop Drop Wire Part # PTSL_ _ Pigtail Loop Drop Wire Part # PTPIG_ _ Butterfly Loop Drop Wire (Double Tie Shown) Part # PTBF_ _ 3/4” x 8” * Lathers Channel Drop Wire Part # PTLC_ _ *Other sizes available 3/4” x 8” * Lathers Channel with Pigtail Loop Drop Wire Part # PTLP_ _ *Other sizes available Bar Joist - Pull Down Clamp 1/16” - 1/4” Flange Thickness Part # RAM-L1701 Pre-tied Part # PT _ _ L1701 Hammer-on Beam Clamp - Specify Flange Thickness Pre-tied Part # PT _ _ HBC Z Purlin Clip Part # RAM-L1801 Pre-tied Part # PT _ _ L1801 Other Clamps and Clips 45˚ 3” x 4” Seismic Plate* Part # SP45 Pre-tied Part # PT _ _ SP45 17 90˚ 3” x 4” Seismic Plate* Part # SP90 Pre-tied Part # PT _ _ SP90 *Meets California DSA and OSHPD requirements #3 x 12” * Rebar Drop Wire Part # PTRB_ _ *Other sizes available PRE-ASSEMBLED ATTACHMENTS Wood and Glu Lam Attachment Solutions Timber Pin & Clip See pg 8 FAST & EASY Insert the pre-tied TIMBER PIN assembly into the Powder Puff or other Stud Gun nose piece... then actuate the tool. Shown with Triple Wire Tie Timber Pin assemblies fit the Powder Puff and all Stud Guns with 2-1/2” drive pin capacity. 2-1/2” Timberpin and Clip Assembly Part # CEA-PDCTCP250 Pre-tied Part # PT_ _ TP Eye Wire Wood Lags CEAS Exclusive Telescoping Pre-tied Wire Pole See Pg 7 1/4” x 3” Wood Lag Eyewire Fastener Part # ELG143 Eyewire Part # EW _ _ L3 1/4” x 4” Wood Lag Eyewire Fastener Part # ELG144 Eyewire Part # EW _ _ L4 1/4” x 5” Wood Lag Eyewire Fastener Part # ELG145 Eyewire Part # EW _ _ L5 Looking for Stiffy Supports? Please refer to the Stiffy Catalog or visit us online at www.ceasattachments.com 18 CORPORATE HEADQUARTERS AND MANUFACTURING 14848 Northam St. La Mirada, CA 90638 877-GOO-CEAS (877-466-2327) BRANCH OFFICES SAN DIEGO, CA 6490 Marindustry Dr. Suite C San Diego, CA 92121 858-547-0700 ph EAST COAST HEADQUARTERS 1020 Crews Road, Suite Q Matthews, NC 28105 704-841-4080 ph SAN FRANCISCO BAY AREA, CA 42550 Albrae Street Fremont, CA 94538 510-657-1111 ph SACRAMENTO, CA 8169 Alpine Ave., Suite C & D Sacramento, CA 95826 916-732-2424 ph ARIZONA 4215 E. Broadway Rd., Suite 105 Phoenix, AZ 85040 602-470-0505 ph OREGON 14325 N.E Airport Way, Suite 113 Portland, OR 97230 503-252-4423 ph WASHINGTON 5113 Pacific Highway, Unit 3 Fife, WA 98424 253-926-2250 ph NEVADA 4125 Wagon Trail Road Las Vegas, NV 89118 702-364-2606 ph NEW YORK 3816 Skillman Avenue Long Island City, NY 11101 (516) 462-3902 ph UTAH 3739 W 2270 S Suite E West Valley City, UT 84119 (801) 495-7264 ph PUERTO RICO 701 Ponce de León Ave, PMB 157 San Juan, PR 00907 (787) 461-1275 ph CONSTRUCTION ENGINEERED ATTACHMENT SOLUTIONS ceasattachments.com (877) GOO-CEAS (877) 466-2327
