2x4 Console Cubby Shelves

Transcription

Published on Ana White (http://www.ana-white.com)
2x4 Console Cubby Shelves [1]
Submitted by Ana White [2] on Fri, 2010-03-05 11:31
[1]
This stack of magazines from our trip to the bookstore have been
waiting to be blogged for a couple of weeks, and just yesterday it
occurred to me that the April editions are probably now available. So
not to overwhelm you with magazines, but I wanted to show you the
reason I bought the Better Homes and Gardens DIY magazine for March
2010
Page 1 of 13
[3]
image from DIY Magazine, Better Homes and Gardens, Spring 2010
Page 2 of 13
I loved this room, and I especially love the shelving. Of course
this is an IKEA Expedit unit, and at $70, a very reasonable price. I am
going to give you plans for a similar unit (with trim over the shelves and
dividers for extra strength) today, and also show you how to add the
molding on the bottom of the shelving unit.
[4]
image from DIY Magazine, from Better Homes and Gardens Spring 2010
Notice that is THREE shelving units, put together with a solid
countertop. I will show you how to adjust the length of the legs in this
plan to get this exact look. Love those trees? Go to here for the pattern
[5], from Jeni Wright of Team DIY.
[6]
Page 3 of 13
So you might not have room for all three. I just want to give you an
idea of how to finish out the tops and bottoms to make the shelving
units look like built-ins. Of course, if you like the wheeled version better,
[7]
That's the plan we are doing today!
Summary:
This console height cubby unit can be used as wall storage or as one of
our readers did (inspired by DIY Magazine) an entire wall of storage!
Special thanks to our readers for sharing their photos.
CategoriesProject Type: Bookshelves [8]
Cubbies [9]
Room: storage and organization [10]
Bedroom [11]
dining room [12]
entry way [13]
Kids and Toys [14]
living room [15]
office [16]
Collections: Rolling Cubbies [17]
Skill Level: Intermediate [18]
Style: Modern [19]
Estimated Cost: $20 - $50 [20]
Page 4 of 13
Dimensions: 63 1/2" x 30 1/4" x 12 3/4"
4 – 8′ 1×12 Boards (Cut all of the long cuts first, short cuts from the
scraps)
8 – 1×2 Boards, 8′ Length
Common Materials: 1 1/4 inch screws
2 inch screws
1 1/4 inch finish nails
2 inch finish nails
Dimensions:
1-1/4" Pocket Hole Screws [21]
2-1/2" Pocket Hole Screws [22]
Elmer's Wood Glue [23]
Elmer's Wood Filler [24]
120 grit sandpaper
primer
wood conditioner
paint
paint brush
Tools:
Page 5 of 13
Page 6 of 13
[25]
[26]
[27]
[28]
[29]
Cut List:
Cut List for the Box
2
1
2
6
–
–
–
–
1×12
1×12
1×12
1×12
@ 30 1/4″ (Sides
2 63 1/2″ (Top)
@ 62″ (Shelves)
@ 14″ (Vertical Dividers)
Cut List for the Trim (I recommend cutting your trim to the project
specific measurements and using these numbers as a guide)
4 – 1×2 @ 63 1/2″ (Top and Bottom Trim)
10 – 1×2 @ 28″ (Vertical Trim)
8 – 1×2 @ 14″ (Shelf Trim)
Page 7 of 13
3 – 1×2@ 11 1/2″ (Caster Wheel Supports)
General Instructions:
Work on a clean level surface. Take a square after each step. Use glue
and keep outside edges flush as necessary. Use proper safety
equipment and precautions.
[30]
Build the Box. Begin by fastening through the sides with 2″ nails and
glue to the shelves. Use the measurements above to guide you. Then
fasten the top in place.
Step 1
Page 8 of 13
[31]
Dividers. First fasten all the bottom dividers in place, fastening through
the shelves into the ends of the dividers. Mark out the proper spacing.
Then fasten through the top into the top dividers. To fasten the bottom
edge of the top divider, nail at an angle through the bottom corner of
the divider into the shelf. Use 2″ nails and glue.
Step 2
Page 9 of 13
[32]
Trim. Using 2″ nails and glue, fasten the trim in place, measuring to fit.
You may wish to mark the top and bottom trim before fastening the
vertical trim in place. The shelf trim is flush on the top with the shelves.
Step 3
Page 10 of 13
[33]
Caster Supports. Using 1 1/4″ nails and glue, fasten the caster supports
to the bottom of the piece. Then fasten your casters to these pieces.
Step 5
Finishing. Fill any nail holes with wood filler and sand and finish as
desired.
Source URL: http://www.ana-white.com/2010/03/plans-2x4-rolling-cu
bbies-console-table-to-built-ins.html
Step 4
Links
[1] http://www.ana-white.com/2010/03/plans-2x4-rolling-cubbies-consol
e-table-to-built-ins.html
[2] http://www.ana-white.com/users/ana-white
[3] http://2.bp.blogspot.com/_LodZ9etRvTw/S6LqqWWksFI/AAAAAAAAFQ
c/K3i_Z6S0i0c/s1600-h/DIY+magazine+1.jpg
[4] http://1.bp.blogspot.com/_LodZ9etRvTw/S6Lsb1JpjTI/AAAAAAAAFQk/
4ZD1lw9WSA8/s1600-h/DIY+magazine+2.jpg
[5] http://www.bhg.com/decorating/do-it-yourself/
[6] http://3.bp.blogspot.com/_LodZ9etRvTw/S6Lz73hvhlI/AAAAAAAAFQ0/
VY3Gpg7oIvM/s1600-h/knock+off+wood+2x4+rolling+bench+room+1.j
Page 11 of 13
pg
[7] http://1.bp.blogspot.com/_LodZ9etRvTw/S6L0amO2obI/AAAAAAAAFQ
8/KzM_0PGlMB4/s1600-h/knock+off+wood+2x4+rolling+bench.jpg
[8] http://www.ana-white.com/category/plans/project-type/bookshelves
[9] http://www.ana-white.com/category/plans/project-type/cubbies
[10] http://www.ana-white.com/category/plans/room/storage-and-organi
zation
[11] http://www.ana-white.com/category/plans/room/bedroom
[12] http://www.ana-white.com/category/plans/room/dining-room
[13] http://www.ana-white.com/category/plans/room/entry-way
[14] http://www.ana-white.com/category/plans/room/kids-and-toys
[15] http://www.ana-white.com/category/plans/room/living-room
[16] http://www.ana-white.com/category/plans/room/office
[17]
http://www.ana-white.com/category/plans/collections/rolling-cubbies
[18] http://www.ana-white.com/category/plans/skill-level/intermediate
[19] http://www.ana-white.com/category/plans/style/modern
[20] http://www.ana-white.com/category/plans/estimated-cost/20-50
[21] http://www.amazon.com/gp/product/B0006444U2/ref=as_li_tl?ie=U
TF8&camp=1789&creative=390957&creativeASIN=B00
06444U2&linkCode=as2&tag=knooffwoo-20&linkId=5AJJ
GUAWGYX2TT7E
[22] http://www.amazon.com/gp/product/B000BN7DLU/ref=as_li_tl?ie=U
TF8&camp=1789&creative=390957&creativeASIN=B00
0BN7DLU&linkCode=as2&tag=knooffwoo-20&linkId=XL
DYGROR7GI4SHLA
[23] http://elmers.com/diy
[24] http://elmers.com/products/wood-filler-and-other-repair?filters=con
struction#
[25] http://www.kregtool.com/files/anawhite/anawhite.asp
[26] https://www.ryobitools.com/power-tools/products/details/537
[30] http://www.ana-white.com/sites/default/files/knock_off_wood_2x4_r
olling_bench_room_8.jpg
Page 12 of 13
Page 13 of 13

2x4 Console Cubby Shelves

Transcription

Similar documents

How to make a cubby house

display cabinet furniture trend design

picnic table p1

Standard Console 425-6012

JULIAN - Armani/Casa

Lapmaster

Piano Spec Sheet Template

Remote System Management

Untitled - atrium