ZEXIA1503-05 - FUJITEC Global Website

Transcription

ISO9001
ISO14001
OHSAS18001
CAUTION: The product images/pictures in this product catalog are conceptual renderings that do not fully reflect actual colors
and detailed parts. Therefore, this catalog cannot be used as a basis for a contract or negotiations.
ZEXIA1503-05
PRODUCT CONCEPT
Global Fujitec, Creating and Leading
the New Standard for Elevators.
Delivering safe and reliable elevators to the world. Trusted
by people all over the world.
1
For our new global standard elevator, Fujitec has standardized elevator main
components, such as traction machine, control system and aesthetic fixtures,
as Global Common Components.
Thus establishing the Fujitec brand identity and creating an integrated global
quality management system and product reliability for our global supply chain.
2
DYNAMICS
INTELLIGENCE
HUMANITY
The permanent magnet synchronous
gearless traction machine designed by
Fujitec realizes the best balance between
dynamic performance and reliability.
Fujitec accumulated its know-how
expertise throughout the design to
production process.
Our products meet various space-saving
layout requirements.
Fujitec’s fully self-manufactured control
system, ranging from control-circuit to
inverter, establishes a highly reliable
elevator performance.
At anytime, we can provide prompt
support that will improve operating
efficiency.
A new universal design provides higher
visibility, usability and passenger comfort.
Simple but elegant, our new design offers
congenial space for all passengers.
3
4
DYNAMICS
INTELLIGENCE
Green
Enhanced
Safety
Permanent Magnet Gearless Traction Machine
The new Permanent Magnet (PM) synchronous gearless drive
system does not require a speed-reducing mechanism which
eliminates the use of polluting lubricating oil in a conventional
gear box. Thereby establishing a new age of elevators for green
functionality and eco-friendliness.
By upgrading various elevator
safety mechanisms, safety is
further enhanced.
The design philosophy of the
Fujitec Group is fully applied
in order to ensure passenger
safety to the highest extent.
Noise in the machine room is substantially reduced because no
noise is generated by the gear when the motor is running at high
speeds.
Car Door Opening
Protection Device
Small Machine Room = Space Saving
This safety device prevents the car
door from opening in a non-locking
area, which protects passengers
from falling into the hoistway.
Compared with conventional machine room elevators, our
small machine room requires 60% less area.
A substantial area reduction of
60%
Reliable
Driving System Design
Impact Resistant
Landing Door System
Power
Conventional Machine
827kWh/month
PM Gearless Machine
646kWh/month
Motor Capacity Conventional Machine
9.0kW
PM Gearless Machine
8.5kW
22%
Data for Monthly※ Electrical Usage
600 Operations Per Day
※One month shall be 30 days.
Travel Distance: 30meters Rated Speed: 1.0mps Rated Load: 1200kg
Ultra-Slim
The landing doors are further
strengthened to be more impact
resistant, which effectively protects
passengers from falling into the
hoistway in the event of an accidental
impact with the landing doors.
Depending on actual conditions, application and calculation results will vary.
Permanent Magnet Gearless Door Operator
Distributed Control System
Fujitec's new ultra-slim PM door operator employs
Fujitec's highly-developed transmission mechanism
which uses a PM motor as the driving device.
Compared with conventional motor driving door
operators, around 35% reduction in energy usage is
achieved.
With multiple security settings, the adoption of a
terminal holding device provides more stable, smooth
opening and closing actions, ensuring safe elevator
operation. In addition, the ultra-slim design saves
hoistway space.
Energy usage reduced by around
5
35%
Serial communication is adopted between the control panel (32-bit), hall-call
buttons, floor indicators and hall lanterns.
UCMP (Unintended
Car Movement
Protection System)
The Unintended Car Movement
Protection System (UCMP)
can immobilize the car when
the elevator landing and car
doors are opened but the car
is not aligned correctly with the
landing floor. This protects
against personal injury and
equipment damage.
COP: Control Panel
COB: Car Operating Board
IN: Hall Indicator
MIC: Microcomputer
Depending on content and quantity of data, multiple protocol is respectively
used, which achieves high-speed and large-scale data communications at
10 times the rate when compared to conventional systems. As a result, the
capability of monitoring elevator running status and instructions, with respect to
communication speed, precision, reliability, has been greatly enhanced.
The “BUS LINE mode”, advanced in the industry, is employed for
communication, with strong anti-interference capabilities and multiple system
expansion options.
than the conventional.
Instructions for conventional elevators are transmitted from the control panel in the machine room to respective
devices through the traveling cable. Fujitec's "distributed control system" will exert the advantage of its security
much better, the respective functions will be implemented strictly through the correct command received, so the
elevator will obtain the absolute security.
6
HUMANITY
Intelligent·Clean
Human
Engineering
The new Fujitec's global standard
design is applied for button and font.
This is human engineering, a
combination of better visibility
and improved human-machine
interface.
VONIC Automatic Voice Announcement System (Optional)
The automatic voice announcement system is used for broadcasting elevator
direction, arrival floor, door actions, emergency instructions and other information.
IONFUL PlasmaclusterTM Ion Generating System
New Standard Font
23569
Former Standard Font
23569
Fujitec embraces the PlasmaclusterTM
technology of Sharp Corporation,
and takes the lead in utilizing the
PlasmaclusterTM Ion Generating
System (IONFUL) in the elevator
industry. It is highly effective in
eliminating airborne mold, germs,
bacteria, allergens, and bad odors.
Ventilation Unit
Plasmacluster
Ion Generating Device
Ventilation Opening
Ventilation System
Fan
Plasmacluster
The new button design
has a more distinct
font than in previous
generations, which
is more recognizable
in various lighting
conditions and viewing
positions. This unique
design further improves
the human-machine
interface.
A high contrast green
color is applied to the
door open button, so as
to greatly reduce humanerror in pressing the
incorrect button.
Plasmacluster
Ion Generating Device
PlasmaclusterTM is a trademark of Sharp Corporation
Plasmacluster Ion
Safety·Green
Intelligent Multi-Beam
Self-Diagnostic Night Operation
LED Ceiling Lights (Optional)
The intelligent multi-beam system
The self-diagnostic operation is
LED energy-saving ceiling lights
is able to effectively detect humans,
the most characteristic feature of
were adopted early in the industry, so
pets, and objects to ensure passenger
Fujitec products. Every night, the
as to realize green functionality and
safety when entering or leaving the
elevator self-diagnostic operation
environmental protection.
elevator. The protection system
automatically starts to inspect
is designed to project an infrared
elevator operation and braking
ray-light curtain covering the whole
system at each floor to ensure
door opening height at the elevator
passenger safety.
entrance, and if any light beam is
interrupted, the closing door will stop
closing and re-open automatically.
Life
Filament
Lamp
Approx.
1,500h
Wattage 90W
Equal
Conditions
Approx.
13 times
LED
Approx. 1/10
9W
Approx.
20,000h
The emergency call button is located
about 900mm from floor level allowing
children and disabled persons to use
in case of emergency.
7
8
Standard Car Design
Standard Car Design
Stylish Design, Stylish Life
Our elevator cabin is reborn with a new
design concept, the "Accent Stripe." This
vertical running stripe divides the interior car
panels to create a sharp contrast and stylish
atmosphere in the cabin.
ZE-S1
Wall & Transom
CR-b3
Painted Steel Sheet （TE-b2）
Accent Stripe in left, right and rear car panels
Metallic Paint Finish（TE-f2）
Door
Floor
BD-b2
ZE-S2
Ceiling
CE-g2
Painted Steel Sheet （TE-a7）
Wall & Transom
CR-b1
Accent Stripe in left, right and rear
car panels
Painted Steel Sheet（TE-a9）
Door
Ceiling
CE-g2
Floor（Selection）
（Vinyl Tile）
Standard Car Design
ZE-S4
Ceiling
CE-g2
Floor
BD-b1
Sill
Stainless Steel
Wall & Transom
CR-c1
Accent Stripe in Left, Right and Rear
Car Panel
Stainless Steel with Mirror Finish
Fan
Cross-flow Fan & IONFUL
Car Internal Height
2350mm
Car Panel Height
2350mm
ZE-S3
Ceiling
CE-g2
Wall & Transom
CR-b2
Car Panel
Door
Door
Floor
BD-b3
Sill
Stainless Steel
Floor
BD-b1
Sill
Stainless Steel
Fan
Car Internal Height
2350mm
Car Panel Height
2350mm
ZE-S5\S6\S7
Ceiling
CE-g2
Painted Steel Sheet
（TE-a7\ TE-b1\ TE-b2）
Fan
Car Internal Height
2350mm
Wall & Transom
CR-b6\b7\b8
Painted Steel Sheet
Accent Stripe in Left, Right and
Rear Car Panel
Painted Steel Sheet
Car Panel Height
2350mm
Door
Painted Steel Sheet
Floor
BD-b6\ BD-b4\ BD-b5
Sill
Stainless Steel
Fan
Car Internal Height
2350mm
Car Panel Height
2350mm
BD-b1
BD-b2
BD-b3
Sill
Stainless Steel
Fan
Car Operating Board
FX-g1
BD-b4
Car Internal Height
2350mm
Car Panel Height
2350mm
BD-b5
Note 1: ZE-S5\ S6\ S7 respectively correspond to TE-a7、TE-b1、TE-b2 and BD-b6、BD-b4、 BD-b5.
Note 2: The above is the image of ZE-S7.
Note 3: For a wide car and 1200kg & 1350kg capacity cars, the rear panel will be divided into five blocks.
BD-b6
9
10
11
Optional Car Design
Optional Car Design
ZE-X2
ZE-X3
ZE-X4
ZE-X5
ZE-X1
Ceiling
CE-g2
Metallic Paint Finish （TE-f1）
Wall & Transom
Stainless Steel with Hairline Finish
Accent Stripe in Left, Right and Rear Car Panel
Door
Floor
BD-b6
Sill
Stainless Steel
Ceiling
CE-g2
Titanium-Black Coated Stainless Steel
with Mirror Finish
Wall & Door & Transom
Laminated Steel Sheet（W-205）
Car Panell
Ceiling
Standard Design
Floor
Medallion & Plastic Flooring
Sill
Stainless Steel
Fan
Car Internal Height
2350mm
Car Panel Height
2350mm
CE-g2
Ceiling
CE-c1
Painted Steel Sheet（TE-a7）
Car Panel
Titanium-Gold Coated & Etched
Stainless Steel with Mirror
Finish（YS-059）
Ceiling
Optional Design
Floor
Sill
Stainless Steel
Fan
Car Internal Height
2425mm
Car Panel Height
2600mm
CE-c1
Ceiling
CE-c2
Accent Stripe in Left and Right Car Panel
Stainless Steel with Sandblast Finish
Accent Stripe in Rear Car Panel
Half Mirror with SUS-HL Frame
(Mirror by Others)
Floor
Sill
Stainless Steel
Fan
Car Internal Height
2445mm
Car Panel Height
2600mm
CE-c2
Ceiling
CE-c3
Painted Steel Sheet（TE-b1）
Floor
Etched Stainless Steel with Mirror
Finish（YS-015）
Car Panel
Fan
Sill
Stainless Steel
Car Internal Height
2480mm
Car Panel Height
2600mm
CE-c3
Fan
Car Operating Board
FX-g1
Car Internal Height
2350mm
Car Panel Height
2350mm
Painted Steel Sheet (Standard), Light Bulb
Painted Steel Sheet (Standard), Milky White
Resin Shade, Fluorescent Lamp, Light Bulb
Resin Shade, Fluorescent Lamp
Resin Shade, Fluorescent Lamp
Note 1: When Design Style 02, 03 and 04 are selected, the overhead height (OH) is increased by 250mm.
Note 2: Car internal heights will vary according to ceiling types. For details, please contact our sales team.
12
13
14
Standard Fixtures
Optional Fixtures
Floor Indicator : Large and bright
orange LED dot-matrix clearly
indicates the car location even at
a glance. Moving arrow indicator is
synchronized with car acceleration,
deceleration and traveling speeds
and it relays real-time operation
status to passengers.
Capacity Plate:
Indicates Maximum Capacity
Interphone: Passengers can
communicate with the machine
room and the security room in
case of emergency.
FX-c1
FX-g4
FX-g1
FX-c41
FX-c51
FX-c4
FX-c5
Hall Indicator: Bright orange LED clearly
indicates car operation status.
Moving arrow indicator shows real-time
operation status.
Polycarbonate Face Plate: The face plate is
tough (3H Surface Hardness), flame retardant,
and impact resistant. The surface has an antiaging and a lustrous silver metallic finish.
FX-g11
Landing Call Button
（Optional）
Floor Indicator：
Color LCD Screen
FX-g5
Floor Selection Button:
The button rim of the selected
floor lights up in orange for easy
recognition and confirmation.
FX-g6
Large Door Open Button:
The enlarged and high contrasted
green button is more noticeable
and avoids human error providing
better human-machine interface.
Emergency Call Button:
In case of emergency, pressing
the yellow button will immediately
alert the security room and
machine room of an emergency
situation. The interphone is also
activated by this button.
FX-c7
FX-c72
FX-c6
FX-g7
FX-g8
Service Console: Operation
control and other switches are
located in the console box.
The console can be opened
by authorized personnel with a
special key.
FX-c71
Spec
Face Plate
Indicator
Button
Standard Spec
Resin & Polycarbonate (Wall Mounted Type)
Orange Dot-Matrix LED
Micro Touch Button CP-C1(Resin)
Spec
Face Plate
Indicator
Button
15
Optional Spec
Stainless Steel with Hairline Finish (Box Type)
Orange Dot-Matrix LED：FX-c1，FX-c4，FX-c5，FX-c7，FX-c71
Monochrome LCD Screen：FX-c41，FX-c51，FX-c72
Micro Touch Button CP-D1(Stainless Steel)
16
Optional Fixtures
Optional Fixtures
FX-b11
FX-b5
FX-b4
FX-f1
FX-f4
FX-f5
FX-f41
FX-f51
Floor Indicator：
Color LCD Screen
FX-b1
FX-b71
FX-b7
FX-b8
FX-b6
FX-f71
FX-f61
FX-f41，FX-f51、FX-f61、FX-f71:Wall Mounted Type; FX-f4、FX-f5 :Box Type
Spec
Face Plate
Indicator
Button
17
Optional Spec
Stainless Steel with Mirror and Sandblast Finish (Box Type)
Micro Touch Button CP-C2(Stainless Steel)
Spec
Face Plate
Indicator
Button
Optional Spec
Resin & Metal Surface(Wall Mounted Type/Box Type)
Micro Touch Button CP-D1(Stainless Steel)
18
Landing Design
Color Chart
The Expert in Control Systems, Providing Solutions
Superb Craftsmanship & Smooth Texture
Our advanced control system will meet the various demands from customers for group control system under various building requirements.
Robustness, using high-corrosion resistant electro-galvanized steel sheet used as a base material, and comfort, using powder coating
finish to provide vibrant and sharp visual effects, are balanced.
TE-a9
Ceiling, Car Panel, Car Door,
Landing Door, Jamb
TE-a7
Note:TE-f1 and TE-f2 uses sprayed metallic
paint which are not applicable to the landing door
and jamb.
TE-f1
TE-b1
TE-f2
TE-b2
1 Car
2 Car
YS-001
YS-004
YS-007
YS-008
YS-015
YS-025
YS-026
YS-059
BD-b1
BD-b2
BD-b3
BD-b4
BD-b5
BD-b6
Car Panel, Car Door and
Landing Door
（Stainless Steel with Etching）
Car Floor（Vinyl Tile）
The above computer generated colors may differ from actual colors.
Group Supervisory Control
19
Please confirm the color with an actual color sample.
20
Functions
OPERATION SYSTEM
Driving System
PM Synchronous Gearless Traction Machine.
Floor Height SelfLearning
The elevator has a self-learning mechanism that detects each floor height precisely in order to realize the accurate
leveling.
Starting Torque
Compensation
Compensation torque is applied before elevator operation to ensure passenger comfort while the elevator is starting to
move.
SERVICE FUNCTIONS
Automatic Return to
Main Floor (1 Car, 2
Cars and Group
Operation)
When a car does not receive any registered calls within a preset time, this service function moves the car to a
predetermined floor and waits in standby mode for a call registration.
TM
SAFETY FUNCTIONS
TM
IONFUL: Plasmacluster
Ion Generating System
Plasmacluster Ion Generating System, which is built-in to a car's ventilation unit, creates clean air for passenger comfort by
eliminating germs, odors, bacteria, and allergens inside the car.
Anti-Nuisance Function
All car calls will be automatically canceled when an extraordinary number of car calls are registered within a very short
time and/or when more than 4 calls are registered but the in-car load is below 100kg.
Independent Operation
A car designated for exclusive-use will operate independently.
When turned on, the designated car shall respond to car calls only.
Reverse-Direction
Car-Call Cancellation
When a passenger tries to register a car call that is behind the current traveling direction, the system will regard it as a
nuisance call and ignore it in order to maintain elevator service efficiently.
Attendant Operation
Mistaken Car-Call
Cancellation
In the case of a mistaken car call registration, 2 consecutive pushes on the registered button within 0.3 to 1.0 second
will cancel the call registration.
Rescue Operation to
the Nearest Floor
a) The car responds to both car and landing calls.
b) When the car is stopped,pressing the "up or down" button on the car console will select the travel direction and
continuously pressing the same button will close the car door.
In case a car prematurely stops between floors, a safety circuit will check and determine the situation, then automatically
and slowly move the car to the nearest available floor.
Auto Adjustment of
Open-Door Duration
Door Opening Failure
Rescue Operation
In case of a door opening failure after arriving at the destination floor, the car will move to the next available floor and
automatically open the door.
a) Based on registered car and landing calls, the system automatically adjusts the duration (dwell time) for which a car
stays and keeps its doors open at every floor.
b) In accordance with other factors after the doors open (multi-beam sensor, door open button usage), the system
automatically adjusts the duration for which a car stays and keeps its doors open at every floor .
Auto-Separation after
Elevator Failure (2 Cars)
In case a car is operating abnormally, the elevator group control system will separate the affected car from group control
and operate the remaining car normally.
Automatic Fan
and Light Control
In case a car doesn' t receive any registered calls for a preset time, its ventilation fan and lights will automatically turn
off, so as to reduce energy usage.
Open Door Warning
In case the passenger(s) try to forcibly open the car doors during operation or when stopped in an un-leveling zone, a
warning device will sound an alarm. If the passenger(s) still continue to force the doors open, the car will protectively stop
or remain stopped and only restart after confirming the doors are closed.
In the event a car is overloaded, the car doors will not close and an audible alarm will sound and the
car console will display "OVERLOAD".
Visual Display on COB
(Car Operating Board)
A visual display on the COB will provide passengers with timely text messages reflecting current conditions such as
"OVERLOAD", "EMER. OPERATION" (Optional Function). The message can be synchronized with VONIC to provide
visual and audio information.
Return Signal Output
from Evacuation Floor
In the event of a fire, the elevator will send a feedback signal to the building system after returning to the designated
evacuation floor.
Overload Warning
Auto Re-Leveling
In case a car does not stop flush with a landing, the device will re-level the car by creeping it up or down.
Door Nudging
Multi-Beam Door
Sensor
In the event that car doors remain open past a preset time, the device will initiate a slow-door-closing operation while
sounding an audible alarm (The multi-beam door sensor is ignored but the mechanical safety edge system is still active
when the door is forcibly closed.).
In case a car is unable to complete door-opening operation at a destination floor within a preset time, the device will
move the car to another destination floor registered by the car or a landing call. In the case of something obstructing
door-closing operation past a preset time, a respective door-closing operation will start to clear the doorway
obstruction.
The sensor emits multiple infrared beams, creating an invisible curtain covering the entire doorway, even if only a single
beam is interrupted, the sensor will stop the closing doors and reopen them.
Five-Way Interphone
System
An interphone system for 5-way communication is installed in the car console. It allows 4 remote interphones to
communicate with the car top, pit, machine room and building security room.
Alarm Buzzer
(On Car Top)
When the emergency button on the car console is pressed, the interphones in the elevator machine room and the
building security room will sound a warning alarm, and in addition a buzzer mounted on the car top will sound an alarm.
Emergency Car
Lighting
SAFETY FUNCTIONS
Firefighter's Operation
This operation will allow firefighters use of a car for rapid building access. For emergencies, the car will only respond to car
calls registered by firefighters.
LANDIC: Battery
Powered Automatic
Landing Operation
In case a power failure causes passengers to become trapped in a car, a compact battery power source will move
the car to the nearest available floor, and open the doors to enable passengers to exit safely.
Multi-Beam Door
Sensor with Mechanical
Safety Edge
A mechanical safety edge device can be incorporated with the multi-beam system for car doors.
Standby Power
Operation
If a power failure occurs, the car will return to a predetermined evacuation floor or the nearest floor using standby power
and will be stopped there on standby.
Provisions for standby power supply shall be supplied by others.
In case there is no interior car lighting, a self-charging battery power source will immediately light up the emergency car
lights for passenger safety and relief.
Auto-Separation after
Elevator Failure (Group
Control）
In the event that a car is operating abnormally under group control, the car will automatically be separated from the group
so as to ensure efficient group control operation of the remaining elevators.
Night-Time SelfDiagnostic Operation
The elevator automatically checks operation conditions and brake system during the night-time and when not receiving
any registered calls. This operation increases passenger safety and maintains high after-sales product quality.
SERVICE FUNCTIONS
Power Phase Error
Monitoring
Start/ run prevention during phase loss or power supply disruption.
Load By-Pass
If a traveling car is loaded up to its rated load capacity, it will bypass floors where landing calls have been registered.
Those registered landing calls will be assigned to the next available car.
Operation Time
Monitoring
The total operation time of the elevator is recorded in the controller.
Visual Display at the
Landing
The landing indicator will display messages corresponding to special conditions; for example, in the "Load By-Pass"
condition, the displays at all floors, with the exception of the terminal floors, will display "FULL".
Emergency-Stop
Switches
Emergency stop switches are installed on the car top and in the pit.
Parking Operation
When elevator operation is shifted to Parking Operation, the designated car(s) will move to and stop at a pre-assigned floor with
doors closed and car lights and fan turned off.
Starting Time Counter
The starting times of the elevator is recorded in the controller.
Overspeed Protection
(Electrical)
When the car overspeeds, the electrical protection device detects and stops the car in time.
Arrival Chime (Inside
the Car)
An arrival chime inside the car will sound softly when a car has arrived at a destination floor.
Overspeed Protection
(Mechanical)
When the car overspeeds, the mechanical protection device detects and stops the car in time.
VONIC: Automatic
Voice Announcement
System (English)
A computerized voice provides passengers with timely information about car directions, car arrivals, door opening and
closing, emergencies, etc. Standard language is English. For other languages, please consult Fujitec representative.
Motor Idle Protection
When the steel wire rope slides, the elevator is capable of inspecting and stopping the operation.
When the position of the stopped car and the displayed floor do not match, the elevator will automatically correct the
deviation by reaching the terminal floor at once.
Automatic Run / Stop
Operation (By Timer)
Elevators can automatically be put temporarily out of service via a preset time schedule.
Auto Adjustment of Car
Position Error
Auto Detection and
Error Recording
The elevator will automatically detect and record the errors and irregularities through the control system to prevent the
expected trouble and swift trouble shooting.
Power Receptacle in
a Car
A power receptacle can be installed in the car. (Maximum Wattage : 1KW).
Electromagnetic
Interference Filter
This device will reduce interference with peripheral equipment by the elevator and improve the elevator's antiinterference stability.
BMS(Building
Management System)
Interface
Through a purpose-built interface, a building management system can receive up-to-date elevator operation data.
Fire Operation
In the event of a fire, the device will automatically clear all registered calls and move the car directly to a predetermined evacuation
floor and immobilize it there (please consult with Fujitec representative in case there are more than two evacuation floors to be
assigned.).
CCTV Cable
For a CCTV camera, video-signal cables suitable for the hoistway traveling cable and machine room are provided.
Group Supervisory
Control (GSO)
The new FLEX-NX system utilizes optimal group supervisory control functions which enhances transport efficiency.
Door Operation
Inspection Device
Car Door Opening
Protection Device
This device prevents the car door from opening in a non-locking area and protects passengers from falling into the
hoistway.
Impact Resistant
Landing Door System
This system further strengthens the impact resistance of the landing door, effectively protecting passengers from falling
into the hoistway.
Unintended Car
Movement Protection
(UCMP)
The UCMP system will immobilize the car if the car and landing doors are opened but are not aligned correctly,
so as to protect against personal injury and equipment damage.
21
Standard Functions
Optional Functions
Human Friendly Functions
No further notice is provided if there is any change for specification, please understand.
22
Planning
Specification
450Kg / 2 Panels - Right Side Opening (2SR) (opposite application for 2SL)
Main Specifications
Capacity
Speed
Number of Stops
450kg、630kg、800kg、1050kg、
1200kg、1350kg
1.0mps、1.5mps、1.75mps、
2.0mps、2.5mps
Up to 40 Stops/ Floors
630Kg～1350Kg (2 Panels - Center Opening)
Remarks: 2.5mps speed is not be applicable for
450kg and 630kg capacity cars.
Control System
Driving System
Up to 110m (up to 1.75mps), 130m
(2.0mps and 2.5mps)
VVVF and 32-bit Computer
Distributed Control System
Permanent Magnet
Synchronous Gearless System
Operation Mode
Door Operation System
Door Opening
Single Car, 2 Cars, Group
Control System (3 - 8 Cars)
VVVF Control and Permanent
Magnet Gearless Door
Operator
2 Panels - Center Opening
Travel Height
Remark:2 Panels - Side Opening for
450kg Capacity
No further notice will be provided if there are specification changes.
23
The above dimensions are for reference only, the actual engineering design data will be used.
24
Planning
Standard Specification (Wall Mounted Type)
Planning
Machine Room and Hoistway Plan (Wide Car)
Optional Specification (Box Type)
Optional Specification (Box Type)
*1. For 450kg, 630kg, 800kg and 1,350kg capacity cars, the single wrap machine is applied.
For 1050kg and 1200kg capacity cars, the full wrap machine is applied.
*2.The shown arrangement of the machine room door is only an example. Please consult us for actual arrangement.
*3.The shown arrangement of the control panel is only an example. Please consult us for actual arrangement.
*4. Dimension tolerance of hoistway shall be +25mm/-0mm.
*5. The didmension shall be based on the hoistway with RC-structure.
*6. The hoistway's internal dimension shall be calculated after the pit waterproof finish.
*7. If the hoistway's internal dimension is too large, it will be necessary to provide intermediate beams.
*8. The hoistway's structural wall thickness shall be 150mm or more (not including the finish).
*9. The above dimensions are for reference only, the actual engineering design data will be used.
The above dimensions are for reference only, the actual engineering design data will supersede.
25
26
Planning
Relevant Dimensions
Machine Room and Hoistway Plan (Deep Car)
Rear Counter-Weight
Load- Bearing of Hanging
Hook - 3,000kg
COB
Over Head Height (OH)
2100 (H)
Max.7000mm - Separation Distance
1
Depth (Y)
Depth (B)
500
Effective Height of the
Machine Room (MH)
(Work by Others)
Width (W)
Width (A)
Width (X)
Hoistway Plan
Total Height
Traveling Height
Top Floor
Side Counter-Weight
Width (MX)
Hoistway Lighting
Ventilation
Window
(Work by
Others)
(Work by Others)
Temperature
Sensor
(Work by
Others)
Ventilation
Window
(Work by
Others)
R2
Bottom Floor
Hoistway Lighting
Switch Installation
(Work by Others)
Pit Depth (P)
Receptacle
(Work by Others)
500
Pit Inspection
Receptacle
Depth (MY)
R1
2100 (H)
Max.7000mm - Separation Distance
Governor
Receiving Box
(Work by Others)
COP
Machine Room Door
W950xH1900
Hatch Side
In case the capacity is 450kg, the size of the standard machine room is increased by 100mm in the left and right width than the size of the hoistway.
R3
R4
Hoistway Section
(Work by Others)
*1. In case the capacity is 800kg, the single wrap machine is applied.
In case the capacity is 1050kg, 1200kg and 1350kg, the full wrap machine is applied.
*2.The arrangement of the machine room door is only an example. Please inquire us for the actual arrangement.
*3.The arrangement of the control panel is only an example. Please inquire us for the actual arrangement.
*4. Dimension tolerance of hoistway shall be +25mm/-0mm.
*5. The didmension shall be based on the hoistway with RC-structure.
*6. The hoistway's internal dimension shall be calculated after the pit waterproof finish.
*7. If the hoistway's internal dimension is too large, it will be necessary to provide intermediate beams.
*8. The hoistway's structural wall thickness shall be 150mm or more (not including the finish).
*9. The above dimensions are for reference only, the actual engineering design data will be used.
27
The car internal heights and top heights vary by the ceiling type. For details, please contact our sales persons.
Water Proofing
Machine Room Plan
28
Other Works
Power Supply Data
Ambient Requirements
Hoistway Internal Temperature
Within 5℃~ 40℃
Relative Humidity
The relative humidity of the air shall not exceed 50% if the highest temperature of 40℃ is reached. Comparatively, if the temperature
is lower, the relative humidity can be higher. If the monthly average low temperature during the most humid month is no more than
25℃, then the highest relative humidity of that month shall not exceed 90%. If condensation occurs on electrical equipment, relevant
counter-measures must be taken.
Power Supply
Three-Phase
Voltage Fluctuation Range
± 7%
Work by Others
Hoistway
The structure of the elevator hoistway shall be solid, subjected to fire-proofing treatment and provided with required holes for relevant
equipment. The plane dimension of the hoistway is the minimum size determined with plumbing. The vertical allowable deviation of
the hoistway is as follows:
Hoistway height is less than 30m: 0～+25mm
Hoistway height is more than 30m and less than 60m: 0～+35mm
Hoistway height is more than 60m: 0～+50mm
Cement filling around the entrance jambs.
Cement filling surrounding the wall after relevant elevator fixtures are installed.
Waterproofing work (including pumping equipment and waterproof treatment after the elevator equipment is installed as required) in
the pit.
Divider screens and intermediate support beams when the hoistway is shared (the height of the divider screen will extend to 2.5m
above the pit level from the lowest point of the car or counter-weight stroke. The intermediate support beams can be I-beams, and
the position of the beams shall be shown in the position of the rail bracket in the hoistway drawings, but shall not interfere with the
reserved hole of the landing buttons.)
In case the hoistway is in a brick structure, a ring beam is required, of which the height is not less than 300mm, to be placed, so as to
install the rail bracket. (The position of the ring beam shall be shown in the position of the rail bracket in the hoistway drawing.)
Installation of emergency exit doors when the distance between the sills of two adjacent landing doors is more than 11m.
(1) Actual values may differ from the above according to the specifications.
(2) The rated short circuit breaking capacity is 7.5KA.
(3) When power capacity is selected, the voltage drop at full load and acceleration current should be fluctuated.
(4) Please prepare grounding wire specifications according to relevant local codes.
It would be better not to arrange the space that the people can enter below the pit.
Machine Room
The structure of the machine room and fire-proofing work, and the installation of the entrance (Includes noise reduction work and
provisions for smoke detector(s) as required).
In the machine room, each elevator shall be separately equipped with a master switch capable of cutting off all power supply circuits;
and this switch shall be capable of cutting off the maximum current when the elevator is in normal use, and have the stable off position
and on position, so as to be locked with a padlock or other equivalent locking device in the off position.
Providing holes in the machine room (the floor must be able to bear 700kg/ m2)
Providing holes for machine support beams in the machine room and filling work after installation.
Lightweight concrete and dustproof finish after the piping work on the machine room floor.
Provisions for the entrance of the traction machine and other machineries and its restoration.
Provisions for a lifting beam or hook for the machine in the machine room (Note the capacity of the beam/ hook.).
Installation of a window and louver for sun light.
Installation of stairs to access the machine room.
Installation of a ladder and guardrail is required if the floor difference in the machine room is more than 500mm.
Relevant Elevator Equipment
Installation of the switchboard for power in the machine room and the lead and wiring of power supply and lighting to the control
panel of the elevator. (The supply voltage fluctuation shall be within ±7%)
Piping and wiring for interphones and emergency alarm outside the hoistway and machine room.
Provisions for lighting equipment in the machine room. (The brightness of the floor in the machine room shall not be less than 200lx)
Provisions for exhaust fan(s) or air conditioning equipment in the machine room. (The air temperature in the machine room shall be kept
within 5℃~ 40℃.)
Provisions for a power socket for machine room and pit inspections.
Hoistway Lighting. Install low-voltage (30W) lamps 0.5 meters from the highest and lowest points in the hoistway respectively and at
every 7m (maximum) in the middle of the hoistway. The illuminance above the car roof and at 1m above the ground of the pit shall be
50lx at least. A switch for the hoistway lighting will be installed in the machine room and pit respectively.
Other Notes
Please use a high-order harmonic prevention product if the electric leakage breaker or electric leakage alarm is installed. arranged.
In the building, a 500mm clearance distance must be maintained when installing the telecommunication cable and power line of the
elevator.
The corroding metal, damaged and insulated gas and conductive dust shall not be provided in the machine room and the hoistway.
Storage for elevator parts and installation materials shall be provided.
29
No further notice will be provided if there is any future specification changes.
30
Fujitec Global Operations
Langfang Plant (China)
Shanghai Fujitec City (China)
Ohio Plant (United States)
Korea Plant
India Plant
Singapore Plant
North & South America
Japan
East Asia
FUJITEC AMERICA, INC.
FUJITEC CANADA, INC.
FUJITEC VENEZUELA C.A.
FUJITEC ARGENTINA S.A.
FUJITEC URUGUAY S.A.
FUJITEC CO., LTD.
FUJITEC (HK) CO., LTD.
Europe & Middle East
Big Wing (Group Headquarters in Japan, Elevator Plant)
FUJITEC UK LTD.
FUJITEC DEUTSCHLAND GmbH
FUJITEC SAUDI ARABIA CO., LTD.
FUJITEC EGYPT CO., LTD.
FUJITEC UAE (DUBAI) OFFICE
FUJITEC TAIWAN CO., LTD.
South Asia
FUJITEC SINGAPORE CORPN. LTD.
FUJITEC INC. (PHILIPPINES)
FUJITEC (MALAYSIA) SDN. BHD.
P.T. FUJITEC INDONESIA
FUJITEC KOREA CO., LTD.
HUASHENG FUJITEC ELEVATOR CO., LTD.
SHANGHAI HUASHENG FUJITEC ESCALATOR CO., LTD.
FUJITEC SHANGHAI TECHNOLOGIES CO., LTD.
FUJITEC SHANGHAI SOURCING CENTER CO., LTD.
FUJITEC VIETNAM CO., LTD.
FUJITEC INDIA PRIVATE LTD.
FUJITEC (THAILAND) CO., LTD.
FUJITEC LANKA(PRIVATE) LTD.
FUJITEC PACIFIC, INC. (GUAM)
31
32

ZEXIA1503-05 - FUJITEC Global Website

Transcription

Similar documents

kik-step®

to pdf

Color Flyer - World Manufacturing

Guardian GLHL-SS GLHR-SS

HydroFit Job Site Requirements

Product sheet BBPE050.4A

Skate Deterrents

ANDREW, SANDBURG AND STAGG HIGH SCHOOLS Orland Park

parkerizing - Home Metal Shop Club

Printable PDF – KE300TH