Submittal Package for DuPont™ Tyvek® CommercialWrap® and

Transcription

Submittal Package for DuPont ™ Tyvek ®
CommercialWrap® and CommercialWrap® D
Related Links:
DuPont™ Tyvek® CommercialWrap®
Substitution Request Form
DuPont™ Tyvek® CommercialWrap® D
Substitution Request Form
Commercial Weather Barrier
Installation Guidelines
Distributed by
Commercial Flashing
Installation Guidelines
DuPont™ Tyvek® ESR Code Report
For support: weatherizationpartners.com
TECHNICAL DATA SHEET
DUPONT™ TYVEK® COMMERCIALWRAP®
A DURABLE, HIGH PERFORMANCE WEATHER BARRIER ENGINEERED
SPECIFICALLY FOR COMMERCIAL CONSTRUCTION
DESCRIPTION
Engineered to provide excellent performance as an air and water barrier, Tyvek®
CommercialWrap® delivers the added strength and durability needed in commercial
construction. As a part of DuPont™ Tyvek® Commercial Air and Water Barrier Systems,
Tyvek® CommercialWrap® can easily be integrated with other system components to
provide superior air and water hold-out with high tear-resistance, high wind-load
resistance and 9-month UV resistance. It provides the best balance of air and moisture
management resulting in more durable and energy efficient structures.
Tyvek® CommercialWrap® is backed by a 10-year limited warranty and industryleading technical support.
TYPICAL PROPERTIES (JULY, 2014)
Please contact your local DuPont™ Tyvek® Specialist before writing specifications
around this product. Product properties are as follows.
Test Method
PRODUCT INFORMATION–FEATURES/BENEFITS
Air and Water Barrier Performance
• Offers the ideal combination of air and water holdout plus vapor permeability.
• Air Barrier Association of America evaluated to exceed ABAA, ASHRAE 90.1 and
IECC air leakage requirements when tested in accordance with ASTM E2357.
Ease of Installation
• Easily installed, prior to the building’s exterior facade, to help protect against air
and water infiltration.
High Performance Durability
• Offers high tear-resistance and high wind-load-resistance to help stand up to
commercial construction site conditions.
• Withstands up to nine months of UV exposure.
Sustainable Solutions
•DuPont Tyvek CommercialWrap may contribute toward LEED points in the
areas of Energy and Atmosphere (EA): Optimizing the Building Envelope and Indoor
Environmental Air Quality (EQ): Construction IAQ Management Plan and Low
Emitting Materials. In addition, the use of a continuous air barrier is a prerequisite
for LEED® applications requiring compliance with ASHRAE 90.1-2010.
™
®
®
®
Property
Unit
Value
ASTM E2357
Air Penetration Resistance
cfm/ft @
1.57 psf
<0.01
Gurley Hill
(TAPPI T-460)
sec/100cc
>1500
ASTM E1677
cfm/ft2 @
1.57 psf
Type 1
ASTM E2178
cfm/ft2 @
1.57 psf
.001
ASTM E283
Wall Assembly Air Penetration
Resistance
ASTM E96-00
Water Vapor Transmission
Method A g/m2-24
hrs
163
ASTM E96-00
Method A (perms)
23
ASTM E96-00
Method B g/m2-24
hrs
200
ASTM E96-00
Method B (perms)
28
cm
280
2.7
2
AATCC 127
Water Penetration Resistance
ASTM E331
Wall Assembly Water
Penetration Resistance
TAPPI T-410
Basis Weight
oz/yd2
lbs/in
38/35
lbs
12/10
ASTM D882
Breaking Strength
ASTM D1117
Tear Resistance
• By helping to effectively seal the building envelope, Tyvek® CommercialWrap®
helps to reduce the amount of energy required for heating and cooling
ASTM E84
Surface Burning Characteristics
Flame Spread Index
Class
10
Class A
Complete System
ASTM E84
Smoke Developed
Index Class
10
Class A
NFPA 285
Flame Propagation/Multiple
Assemblies
–
Pass
Days
Months
270
9
Tyvek® CommercialWrap® can be integrated with DuPont self-adhered flashing
products and Tyvek® Fluid Applied products to offer seamless protection for wall
systems that require mechanically fastened and fluid applied air and water barriers.
Ultra Violet Light Exposure (UV)
Test results shown represent roll averages. Individual results may vary either above or below
averages due to normal manufacturing variations, while continuing to meet product specifications
DUPONT™ TYVEK® COMMERCIALWRAP®
A DURABLE, HIGH PERFORMANCE WEATHER BARRIER ENGINEERED SPECIFICALLY FOR COMMERCIAL CONSTRUCTION
PRODUCT DESCRIPTION
Tyvek® CommercialWrap® is made from 100% flash
spunbonded high density polyethylene fibers which have
been bonded together by heat and pressure, without
binders or fillers, into a tough durable sheet structure.
Additives have been incorporated into the polyethylene to
provide ultraviolet light resistance.
INSTALLATION/USE INSTRUCTIONS
Please refer to DuPont Installation Guidelines for
complete instructions.
Safety Precautions for Use
Tyvek® CommercialWrap® is slippery and should not be
used in any application where it will be walked on. In
addition, DuPont recommends using kick jacks,
scaffolding, or lifts for exterior work above the first floor.
If ladders must be used, extra caution must be taken to
use them safely by following the requirements set forth
in ANSI Standards 14.1, 14.2, and 14.5 for ladders made
of wood, aluminum, and fiberglass, respectively.
Tyvek® CommercialWrap® is combustible and should be
protected from flames and other high heat sources.
Tyvek® CommercialWrap® will melt at 275°F (135°C) and
if the temperature of the product reaches 750°F (400°C),
it will burn and the fire may spread and fall away from
the point of ignition. For more information, call
1-800-44-Tyvek.
Preparation
No surface preparation is needed for the installation of
Tyvek® CommercialWrap®.
TESTING/CODE COMPLIANCE
Moisture Protection –
Weather-Resistant Barriers
Other
The 2012 International Building Code (IBC, Section 1403.2
Weather Protection) requires that exterior walls shall
provide the building with a weather-resistant exterior
wall envelope. This shall include flashing, as described in
Section 1405.4. Tyvek® CommercialWrap® and where
applicable, DuPont self-adhered flashing and accessory
products, have been tested and meet weather-resistant
barrier codes and standards requirements. The following
test methodologies were used:
• NFPA 285 Standard Fire Test Method for Evaluation
of Fire Propagation Characteristics of Exterior
Non-Load-Bearing Wall Assemblies Containing
Combustible Components
• ASTM E331 Standard Test Method for Water
Penetration of Exterior Windows, Skylights, Doors,
and Curtain Walls by Uniform StaticPressure
• ASTM E2556 Standard Specification for Vapor
Permeable Flexible Sheet Water-resistive Barriers
intended for mechanical attachment
• ASTM E96-00 Standard Test Methods for Water Vapor
Transmission of Materials; Water resistive barriers
are typically vapor permeable, which is generally
desirable because it allows for drying of incidental
moisture intrusion into the wall assembly
• ASTM E 84 Standard Test Method for Surface
Burning Characteristics of Building Materials
Tyvek® CommercialWrap®, in conjunction with DuPont
self-adhered flashing and accessory products, have been
evaluated according to Air Barrier Association of America
(ABAA) protocol and are listed at the ABAA website
under “ABAA evaluated Air Barrier Assemblies”,
www.airbarrier.org
NOTICE
Tyvek® CommercialWrap® should be covered with the
facade within nine months to limit UV exposure. Follow
facade manufacturer’s installation and maintenance
requirements in order to maintain water holdout.
MATERIAL STORAGE/DISPOSAL
Tyvek® CommercialWrap® should be stored in a clean,
dry environment.
• AATCC 127 Hydrostatic Head Test for water-resistant
barrier materials, measuring pressure to failure or
time of failure at a given pressure
Tyvek® CommercialWrap® is available the following
roll sizes:
Air Leakage Control — Air Barriers
• 5’ x 200’ (1.5 x 61m)
ASHRAE 90.1 2010 (American Society of Heating,
Refrigerating and Air-Conditioning Engineers) requires
that the entire building envelope shall be designed and
constructed with a continuous air barrier. This is a
mandatory provision for the building envelope. IECC 2012
(International Energy Conservation Code) for commercial
buildings also requires a continuous air barrier. These
codes are being adopted in many states across the
United States. Tyvek® CommercialWrap and where
products have been tested and meet air barrier codes and
standards requirements. The following test
methodologies were used:
• 10’ x 125’ (3.1 x 38.1 m)
PACKAGING
WARRANTY
Backed by a limited product warranty, see
www.weatherization.tyvek.com.
• ASTM E2357 Standard Test Method for Determining
Air Leakage of Air Barrier Assemblies
• ASTM E1677 Standard Specification for an Air
Retarder (AR) Material or System for Low-Rise
Framed Building Walls
• ASTM E2178 Standard Test Method for Air
Permeance of Building Materials
Rate of Air Leakage Through Exterior Windows,
Curtain Walls and Doors Under Specified Pressure
Differences Across the Specimen
Copyright © 2014 E. I. du Pont de Nemours and Company. All Rights Reserved. The DuPont Oval Logo, DuPont™, The miracles of science™, CommercialWrap® and Tyvek®, are
registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. K-27289 (7/14)
DUPONT™ TYVEK® COMMERCIALWRAP® D
A DURABLE, HIGH PERFORMANCE, MECHANICALLY FASTENED AIR AND WATER BARRIER
ENGINEERED TO IMPROVE DRAINAGE AND TO STAND UP TO THE COMMERCIAL JOB SITE
DESCRIPTION
Tyvek® CommercialWrap® D offers superior drainage and durability for commercial
buildings. It features a specially engineered surface texture that provides enhanced
water drainage under a wide variety of facades in climates that may require
additional drainage.
As a part of DuPont™ Tyvek® Commercial Air and Water Barrier Systems, Tyvek®
CommercialWrap® D can easily be integrated with other system components to
provide superior air and water hold-out with high tear-resistance, high wind-loadresistance and 9-month UV resistance. Tyvek® CommercialWrap® D is backed by a
10-year limited warranty and industry-leading technical support.
TYPICAL PROPERTIES (JULY, 2014)
Please contact your local DuPont™ Tyvek® Specialist before writing specifications
around this product. Product properties are as follows:
Test Method
Property
Unit
Value
ASTM E2357
cfm/ft @
1.57 psf
<0.04
Gurley Hill
(TAPPI T-460)
sec/100cc
>750
ASTM E1677
cfm/ft2 @
1.57 psf
Type 1
ASTM E2178
cfm/ft2 @
1.57 psf
.001
• Easily installed, prior to the building’s exterior facade, to help protect against air
and water infiltration.
ASTM E283
Wall Assembly Air Penetration
Resistance
High Performance Durability
ASTM E96-05
212
• Offers high tear-resistance and high wind-load-resistance to help stand up to
commercial construction site conditions.
Method B
g/m2-24 hrs
ASTM E96-05
Method B
(perms)
30
cm
235
PRODUCT INFORMATION–FEATURES/BENEFITS
Air and Water Barrier Performance
• Offers the ideal combination of enhanced drainage, air and water holdout plus
vapor permeability.
• Air Barrier Association of America evaluated to exceed ABAA, ASHRAE 90.1 and
IECC air leakage requirements when tested in accordance with ASTM E2357
Ease of Installation
• Withstands up to nine months of UV exposure.
2
AATCC 127
Water Penetration Resistance
•DuPont™ Tyvek® CommercialWrap® D may contribute toward LEED® points in the
areas of Energy and Atmosphere (EA): Optimizing the Building Envelope and Indoor
Environmental Air Quality (EQ): Construction IAQ Management Plan and Low
Emitting Materials. In addition, the use of a continuous air barrier is a prerequisite
for LEED® applications requiring compliance with ASHRAE 90.1-2010.
ASTM E331
Wall Assembly Water Penetration
Resistance
TAPPI T-410
Basis Weight
oz/yd2
2.4
ASTM D882
Breaking Strength
lbs/in
33/41
• By helping to effectively seal the building envelope, Tyvek® CommercialWrap® D
helps to reduce the amount of energy required for heating and cooling
ASTM D1117
Tear Resistance
lbs
6/9
ASTM E84
Flame Spread
Index Class
15 Class
A
ASTM E84
Smoke
Developed
Index Class
25
Class A
NFPA 285
Flame Propagation/Multiple
Assemblies
–
Pass
Days
Months
270
9
Sustainable Solutions
Complete System
Tyvek® CommercialWrap® D can be integrated with DuPont self-adhered flashing
products and Tyvek® Fluid Applied products to offer seamless protection for wall
systems that require mechanically fastened and fluid applied air and water barriers.
Ultra Violet Light Exposure (UV)
Test results shown represent roll averages. Individual results may vary either above or below
averages due to normal manufacturing variations, while continuing to meet product specifications.
DUPONT™ TYVEK® COMMERCIALWRAP® D
A DURABLE WEATHER BARRIER ENGINEERED FOR ENHANCED DRAINAGE
PRODUCT DESCRIPTION
Tyvek® CommercialWrap® D is made from 100% flash
spunbonded high density polyethylene fibers which have
been bonded together by heat and pressure, without
binders or fillers, into a tough durable sheet structure.
Additives have been incorporated into the polyethylene to
provide ultraviolet light resistance.
INSTALLATION/USE INSTRUCTIONS
Please refer to DuPont Installation Guidelines for
complete instructions.
Safety Precautions for Use
Tyvek® CommercialWrap® D is slippery and should not be
used in any application where it will be walked on. In
addition, DuPont recommends using kick jacks,
scaffolding, or lifts for exterior work above the first floor.
If ladders must be used, extra caution must be taken to
use them safely by following the requirements set forth
in ANSI Standards 14.1, 14.2, and 14.5 for ladders made
of wood, aluminum, and fiberglass, respectively.
Tyvek® CommercialWrap® D is combustible and should
be protected from flames and other high heat sources.
Tyvek® CommercialWrap® D will melt at 275°F (135°C)
and if the temperature of the product reaches 750°F
(400°C), it will burn and the fire may spread and fall away
from the point of ignition. For more information, call
1-800-44-Tyvek.
Preparation
No surface preparation is needed for the installation of
Tyvek® CommercialWrap® D.
TESTING/CODE COMPLIANCE
Moisture Protection –
Weather-Resistant Barriers
Other
The 2012 International Building Code (IBC, Section 1403.2
Weather Protection) requires that exterior walls shall
provide the building with a weather-resistant exterior
wall envelope. This shall include flashing, as described in
Section 1405.4. Tyvek® CommercialWrap® D and where
products, have been tested and meet weather-resistant
barrier codes and standards requirements. The following
test methodologies were used:
• NFPA 285 Standard Fire Test Method for Evaluation
of Fire Propagation Characteristics of Exterior
Non-Load-Bearing Wall Assemblies Containing
Combustible Components
• ASTM E331 Standard Test Method for Water
Penetration of Exterior Windows, Skylights, Doors,
and Curtain Walls by Uniform StaticPressure
• ASTM E2556 Standard Specification for Vapor
Permeable Flexible Sheet Water-resistive Barriers
intended for mechanical attachment
• ASTM E96-00 Standard Test Methods for Water Vapor
Transmission of Materials; Water resistive barriers
are typically vapor permeable, which is generally
desirable because it allows for drying of incidental
moisture intrusion into the wall assembly
• ASTM E 84 Standard Test Method for Surface
Burning Characteristics of Building Materials
Tyvek® CommercialWrap® D, in conjunction with DuPont
self-adhered flashing and accessory products, have been
evaluated according to Air Barrier Association of America
(ABAA) protocol and are listed at the ABAA website
under “ABAA evaluated Air Barrier Assemblies”,
www.airbarrier.org
NOTICE
Tyvek® CommercialWrap® D should be covered with the
facade within nine months to limit UV exposure. Follow
facade manufacturer’s installation and maintenance
requirements in order to maintain water holdout.
MATERIAL STORAGE/DISPOSAL
Tyvek® CommercialWrap® D should be stored in a clean,
dry environment.
• AATCC 127 Hydrostatic Head Test for water-resistant
barrier materials, measuring pressure to failure or
time of failure at a given pressure
Tyvek® CommercialWrap® D is available the following
roll sizes:
Air Leakage Control — Air Barriers
• 5’ x 200’ (1.5 x 61m)
ASHRAE 90.1 2010 (American Society of Heating,
Refrigerating and Air-Conditioning Engineers) requires
that the entire building envelope shall be designed and
constructed with a continuous air barrier. This is a
mandatory provision for the building envelope. IECC 2012
(International Energy Conservation Code) for commercial
buildings also requires a continuous air barrier. These
codes are being adopted in many states across the
United States. Tyvek® CommercialWrap D and where
products have been tested and meet air barrier codes and
standards requirements. The following test
methodologies were used:
• 10’ x 125’ (3.1 x 38.1 m)
PACKAGING
WARRANTY
Backed by a limited product warranty, see
www.weatherization.tyvek.com.
Air Leakage of Air Barrier Assemblies
• ASTM E1677 Standard Specification for an Air
Retarder (AR) Material or System for Low-Rise
Framed Building Walls
• ASTM E2178 Standard Test Method for Air
Permeance of Building Materials
Rate of Air Leakage Through Exterior Windows,
Curtain Walls and Doors Under Specified Pressure
Differences Across the Specimen
Copyright © 2014 E. I. du Pont de Nemours and Company. All Rights Reserved. The DuPont Oval Logo, DuPont™, The miracles of science™, CommercialWrap® and Tyvek®, are
registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. K-27288 (7/14)
DuPont Flashing Systems
physical properties data sheet
Product Data
Properties
DuPont™ FlexWrap™ NF
DuPont™ FlexWrap™ RW
DuPont™ FlASHING TAPE
Face Sheet
Micro-creped, polyethylene laminate (white)
Elasticized polyethylene laminate (white)
Polypropylene film
Adhesive*
Butyl Rubber (black)
Thickness
64 mil (1,620 microns)
70 mil (1,775 microns)
20 mil (507 microns)
Release Liner
1-piece, heavy-duty siliconized paper for
6-inch width product; 2-piece, heavy-duty
siliconized paper for 9-inch width product
Custom-designed, multi-piece,
heavy-duty siliconized paper
1-piece heavy-duty siliconized paper
Dimensions
6- or 9-inch width x 75 feet length
9-inch width x 6-inch length custom
folded pieces
4, 6, or 9-inch width x 100 feet
Applications
Round top or custom shaped windows, 3-D sill
protection, wall interruptions: i.e. dryer vents,
hose bibs. Suitable for use on substrates
where fasteners cannot be applied.
Corner pieces for sill and head of
recessed windows. Available in
single-stud or double-stud versions.
Jambs and heads of rectangular
windows and doors.
Properties
DuPont™ StraightFlash™
DuPont™ StraightFlash™ VF
Face Sheet
Spunbonded polyethylene laminate (white)
Spunbonded polyethylene laminate (white)
Adhesive*
Butyl rubber (black)
Transposed dual sided adhesive for continuous integration; Butyl rubber (black)
Thickness
Release Liner
2-piece, heavy-duty siliconized, scored
release paper
2-piece, heavy-duty siliconized, scored release paper
Dimensions
4-inch width x 150 feet length
Applications
Jambs and heads of rectangular windows.
Brick mold, non-integral flanged and non-flanged rectangular windows and doors.
* Adhesive system is based on 100% butyl elastomer with no asphalt/modified bitumen components.
Performance Testing
Installed System Water Intrusion Testing (Tested with no exterior cladding)
ASTM E-331NO leakage at 300 Pa
ASTM E-331 after thermal aging (0-160°F)NO leakage at 300 Pa
WATER VAPOR PERMEABILITY (ASTM E-96)
< 1 perm (< 60 ng/Pa.sec.m2)
APPLICATION TEMPERATURE
Best when installed above 25°F (consult DuPont for primer recommendations)
UV RESISTANCE
Cover within 120 days
DuPont Flashing Systems products meet the AAMA 711-07 material standard at the highest classification levels:
For more information about
DuPont Flashing Systems, please visit us
at www.Construction.Tyvek.com or
call 1-800-44-Tyvek
Class A (no primer)
Level 3 Thermal Exposure (80°C/176°F for 7 days)
WARNING: DuPont Flashing Systems products and their release paper are slippery and
should not be walked on. Remove release paper from work area immediately.
DuPont Flashing Systems products are combustible and should be protected from flame and
other high heat sources. If the temperature of DuPont Flashing Systems products reach 700°F
(307°C) they will burn and the fire may spread and fall away from the point of ignition.
Copyright © 2011 E.I. du Pont de Nemours and Company. All rights reserved. The DuPont Oval Logo, DuPont™, The miracles of science™, FlexWrap™, and StraightFlash™ are registered trademarks or trademarks
of E.I. du Pont de Nemours and Company or its affiliates. K-25126 07/11
DuPont Tyvek Tape
™
®
Building science bulletin
Specify DuPont Tyvek Tape in commercial building applications to finish the job right.
™
®
In commercial construction, DuPont Tyvek Tape is the crucial final
step for maximum reduction of air and water infiltration through the
building envelope.
™
®
Using a quality weather barrier on a commercial building is as important
as installing it properly. Taping the seams after wrapping, in addition to taping
any tears or holes, is the best practice for maximum reduction of air and water
intrusion into the building envelope.
DuPont Tyvek Tape features a specially engineered adhesive to create the best
adhesion to DuPont Tyvek Weather Barrier Systems in any climate. DuPont Tyvek
Tape works when other tapes won’t, sealing seams for a continuous protective
barrier against air and water infiltration.
™
®
™
DuPont Tyvek Tape is specially engineered to provide the
best adhesion to DuPont Tyvek .
™
®
™
®
®
™
Not all tapes are created equal.
Desired qualities
of a sheathing tape
Strength
High tack
Temperature resistant
UV resistant
Pliability
Ease of use
Taping the seams after wrapping is the best practice
for completely sealing the building envelope.
Permanent
acrylic adhesive
Meets Canadian
Construction Material
Center's Standard
7281 for sheathing
DuPont
Tyvek Tape
Duct
tape
•
•
•
•
•
•
•
•
•
™
®
•
•
•
Blue outdoor
masking tape
Carton
sealing tape
•
•
•
•
•
•
•
®
Technical data
Complete system of products
• Tape materials – UV resistant, biaxially-oriented polypropylene film coated with a specially formulated
permanent acrylic adhesive.
• Roll Length – 50 m (54.68 yds)
• Tensile strength – 27 lbs/in.
• Elongation – 125%
• Meets Canadian Construction Material Center’s
Standard 7281 for sheathing tape.
For optimal protection on all your building projects, use
DuPont Tyvek Tape with DuPont Tyvek Weather Barrier
Systems including DuPont Tyvek CommercialWrap ,
DuPont Tyvek StuccoWrap , DuPont Flashing Systems and
DuPont Tyvek Wrap Caps.
Caliper
• Total – 3.0 mil
• Adhesive – 1.6 mil
• Backing – 1.4 mil
™
®
™
™
™
®
™
®
®
®
™
Our Specialist Network
The DuPont Tyvek Specialist Network is an elite team
of more than 180 highly-trained field representatives,
including 30 who are focused specifically on commercial
building applications. From the latest updates on building
codes, to keeping up with current trends and challenges,
your local DuPont Tyvek Specialist can provide on-site
consulting and training to help make sure the job gets
done right.
™
®
™
Adhesion
™
®
®
• Wet grab – 50 oz/in.
• Peel adhesion – 40 oz/in. (ASTM D3330)
180 degree peel adhesion (oz/in.)
Immediately
DuPont Tyvek
™
After 72 hr dwell
24.0
®
35.0
(Fiber pull off from
DuPont Tyvek )
™
Polyethylene
16.0
Stainless steel
40.0
®
20.0
Temperature resistance
Will withstand temperature extremes from -40°F to 220°F
Pliability
No cracking when bent around 5 mm mandrel @ -4°F.
Moisture Vapor Transmission Rate
(MVTR @ 100°F and 90% Relative Humidity)
0.3 g/100 in /24 hr.
2
Stock sizes and packaging
Product
Case pack
Unit weight
Outside case
dimensions
2.82" x 54.6 yds
bulk pack
24 rolls
12.3 oz
13" x 9" x 12"
3" tape dispenser
20 dispensers
16.6 oz
22" x 14" x 19"
For more information, please call
1-800-44-Tyvek or visit
www.Construction.Tyvek.com
Copyright © 2007 DuPont. The DuPont Oval Logo, DuPont , The miracles of science , CommercialWrap , StuccoWrap , and Tyvek are trademarks or registered trademarks of E.I. du Pont de Nemours
and Company or its affiliates. All rights reserved. K-16156 2/07
™
™
®
®
®
DuPont Commercial Fasteners
Building Science Bulletin
DuPont Tvyek Wrap Cap screws for commercial steel stud applications
™
®
DuPont Tyvek Wrap Caps with full drill point steel stud screws are designed
to provide optimal holding power when securing DuPont Tyvek weather
barriers to steel studs in commercial buildings.
™
®
™
®
Features and benefits
2" DuPont Tvyek Wrap Caps
• Constructed of high-density polyethylene with UV inhibitors
• Increases fastener holding power, reducing the potential for
job-site blow-off of weather barrier
• Provides additional protection around fastener penetrations
• Offers easy handling and installation
™
DuPont Tyvek Wrap Cap screws provide optimal holding
power when securing weather barriers to steel studs.
™
®
DuPont Tyvek Wrap Caps increase holding
power and provide additional protection around
fastener penetrations.
™
®
®
1¾" steel stud screw
• Self-tapping drill point screw
• Coated with an organic fluoropolymer for improved rust protection
• Can be applied by hand or drill
• Core-attached to DuPont Tyvek Wrap Caps for quick installation
• Drill bit included in each box for ease of installation
™
®
Product specifications
DuPont Tyvek Wrap Cap screws
™
®
Cap diameter
Cap material
Cap color
Application
Screw
Box count
Box weight
Box dimensions
2"
high-density polyethelene w/UV inhibitors
white
hand or drill
#8 shank; 1¾" length; coated galvanized steel; modified truss head; Phillips draw
2000
14.5 lbs
12" x 12" x 14"
Recommended fastener spacing and negative wind load
resistance according to ASTM E330*
2" diameter DuPont Tyvek
Wrap Cap screws
™
®
fastener spacing
allowable pressure
12"
70 psf
18"
45 psf
*Values presented are maximum allowable pressures. A factor of safety may
need to be applied for certain claddings.
Complete system of products
For optimal protection on all your building projects, use
DuPont Tyvek Wrap Caps with DuPont Tyvek Weather
Barrier Systems including DuPont Tyvek CommercialWrap ,
DuPont Tyvek StuccoWrap , DuPont Flashing Systems and
DuPont Tyvek Tape.
™
®
™
™
™
®
™
®
®
®
®
®
™
Our Specialist Network
The DuPont Tyvek Specialist Network is an elite team
of more than 180 highly-trained field representatives,
including 30 who are focused specifically on commercial
building applications. From the latest updates on building
codes, to keeping up with current trends and challenges,
your local DuPont Tyvek Specialist can provide on-site
consulting and training to help make sure the job gets
done right.
™
®
™
®
For more information, please call
1-800-44-Tyvek or visit
Copyright © 2007 DuPont. The DuPont Oval Logo, DuPont , The miracles of science , CommercialWrap , StuccoWrap , and Tyvek are trademarks or registered trademarks of
E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. K-16154 2/07
™
™
®
®
®
DuPont Weatherization Products 10-Year Limited Warranty
for Multi-Family, Mixed Use and Light Commercial
Buildings Over Four Stories: When you specify
DuPont Weatherization Systems products, you know that
they’re backed by a company that for over 200 years has
been dedicated to providing sustainable solutions for a
better, safer and healthier life for people everywhere.
Peace of Mind: Backed by a 10-Year Limited Warranty
from DuPont
With 9 months of UV resistance, the ability to withstand wind gusts up to
190 mph, and excellent air and water hold-out, DuPont Tyvek CommercialWrap
and DuPont Tyvek CommercialWrap D are designed to meet the unique needs
of your commercial project. The use of DuPont Weatherization Products combined
with the DuPont Weatherization Products 10-Year Limited Warranty for buildings
over four stories helps provide you added assurance that your commercial
buildings will protect the owner’s valuable investment for years to come.
™
™
®
®
®
®
We stand behind you
Product and Labor Warranty: When you install all required products
according to the applicable DuPont Installation Guidelines and follow the Project
Registration and Observation Process outlined on this page, DuPont will provide
you with replacement product and reasonable labor costs in the event that the
materials do not meet specified air and water hold-out criteria. A DuPont Tyvek
Specialist is available throughout the installation process to provide assistance
and training.
™
®
Product Warranty: Install our products on buildings over four stories in
height and DuPont will provide you with replacement product in the event that
the materials do not meet specified water hold-out criteria. If you would like
assistance or training, a DuPont Tyvek Specialist is available throughout the
installation process.
™
®
For complete warranty details, terms and conditions, visit
www.construction.tyvek.com or talk to your local DuPont Tyvek Specialist to
ensure you meet the requirements of the warranty coverage you want. Only
DuPont may vary the terms and conditions of this warranty.
™
Project Registration and Observation Process for the
10-Year Product and Labor Limited Warranty for
DuPont Weatherization Products
1. Specify all DuPont Weatherization Products covered by the DuPont
Weatherization Product 10-Year Product and Labor Limited Warranty.
2. Complete the first page of the Project Registration and Observation
Form and submit to your DuPont Tyvek Specialist to obtain a
Project Tracking Number.
™
®
3. Arrange a pre-job meeting to include: Architect/architect’s
representative, Owner/owner’s representative, General Contractor/
Builder, Professional Installer and DuPont Tyvek Specialist. Review
and follow applicable installation guidelines, warranty terms and
conditions, and Project Registration and Observation Form.
™
®
4. DuPont Tyvek Specialist arranges site visit, views installation of
DuPont Weatherization Products, completes Project Registration
and Observation Form. Professional installer signs Project
Registration and Observation Form acknowledging the requirements
of the warranty process and terms and conditions.
™
®
5. At project completion, DuPont Tyvek Specialist provides copy of
completed Project Registration and Observation Form and DuPont
Weatherization Products 10-Year Limited Warranty document to all
relevant parties.
™
®
®
Products Covered
Weather Resistive Barriers
Flashing*
DuPont Tvyek CommercialWrap
DuPont Tvyek CommercialWrap D
™
®
™
®
®
®
DuPont
DuPont
DuPont
DuPont
DuPont
™
™
™
™
™
For more information visit
or call 1-800-44-Tyvek
StraightFlash
StraightFlash VF
FlexWrap
FlexWrap NF
Thru-Wall Flashing
™
™
™
™
*Note: In order to receive a Product & Labor Warranty on DuPont Flashing Systems products, a DuPont
Tyvek Weather-Resistive Barrier must also be installed on the building.
™
®
While our commercial products are designed to meet the needs of the
commercial market, DuPont does offer warranty options for our residential
products when used on commercial buildings over four stories in height. Talk to
your DuPont Tyvek Specialist for details.
™
®
Copyright © 2009 DuPont. The DuPont Oval Logo, DuPont™, CommercialWrap , FlexWrap™, StraightFlash™ and Tyvek are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its
affiliates. All rights reserved. K-17993 04/09
®
®
for Multi-Family, Mixed Use and Light Commercial
Buildings UNDER FIVE STORIES: When you specify
DuPont Weatherization Systems products, you know that
they’re backed by a company that for over 200 years has
been dedicated to providing sustainable solutions for a
better, safer and healthier life for people everywhere.
Peace of Mind: Backed by a 10-Year Limited Warranty
from DuPont
With 9 months of UV resistance, the ability to withstand wind gusts up to
190 mph, and excellent air and water hold-out, DuPont Tyvek CommercialWrap
and DuPont Tyvek CommercialWrap D are designed to meet the unique needs
of your commercial project. The use of DuPont Weatherization Products combined
with the DuPont Weatherization Products 10-Year Limited Warranty for buildings
under five stories helps provide you added assurance that your commercial
buildings will protect the owner’s valuable investment for years to come.
™
™
®
®
®
®
We stand behind you
Product and Labor Warranty: When you install all required products
according to the applicable DuPont Installation Guidelines and follow the Project
Registration and Observation Process outlined on this page, DuPont will provide
you with replacement product and reasonable labor costs in the event that the
materials do not meet specified air and water hold-out criteria. A DuPont Tyvek
Specialist is available throughout the installation process to provide assistance
and training.
™
®
Product Warranty: Install our products on buildings less than five stories in
height and DuPont will provide you with replacement product in the event that
the materials do not meet specified water hold-out criteria. If you would like
assistance or training, a DuPont Tyvek Specialist is available throughout the
installation process.
™
®
For complete warranty details, terms and conditions, visit
www.construction.tyvek.com or talk to your local DuPont Tyvek Specialist to
ensure you meet the requirements of the warranty coverage you want. Only
DuPont may vary the terms and conditions of this warranty.
™
Project Registration and Observation Process for the
10-Year Product and Labor Limited Warranty for
DuPont Weatherization Products
1. Specify all DuPont Weatherization Products covered by the DuPont
Weatherization Product 10-Year Product and Labor Limited Warranty.
2. Complete the first page of the Project Registration and Observation
Form and submit to your DuPont Tyvek Specialist to obtain a
Project Tracking Number.
™
®
3. Arrange a pre-job meeting to include: Architect/architect’s
representative, Owner/owner’s representative, General Contractor/
Builder, Professional Installer and DuPont Tyvek Specialist. Review
and follow applicable installation guidelines, warranty terms and
conditions, and Project Registration and Observation Form.
™
®
4. DuPont Tyvek Specialist arranges site visit, views installation of
DuPont Weatherization Products, completes Project Registration
and Observation Form. Professional installer signs Project
Registration and Observation Form acknowledging the requirements
of the warranty process and terms and conditions.
™
®
5. At project completion, DuPont Tyvek Specialist provides copy of
completed Project Registration and Observation Form and DuPont
Weatherization Products 10-Year Limited Warranty document to all
relevant parties.
™
®
®
Products Covered
Weather Resistive Barriers
DuPont
DuPont
DuPont
DuPont
DuPont
DuPont
™
™
™
™
™
™
Tvyek
Tvyek
Tvyek
Tvyek
Tvyek
Tvyek
®
®
®
®
®
®
Flashing*
CommercialWrap
CommercialWrap D
HomeWrap
StuccoWrap
DrainWrap
ThermaWrap
®
®
®
®
™
™
DuPont
DuPont
DuPont
DuPont
DuPont
DuPont
DuPont
DuPont
™
™
™
™
™
™
™
™
For more information visit
www.weatherization.tyvek.com
or call 1-800-44-Tyvek
StraightFlash
StraightFlash VF
StraightFlash OS
FlexWrap
FlexWrap NF
FlexWrap RW
Flashing Tape
Thru-Wall Flashing
™
™
™
™
™
™
*Note: In order to receive a Product & Labor Warranty on DuPont Flashing Systems products, a DuPont
Tyvek Weather-Resistive Barrier must also be installed on the building.
™
®
Copyright © 2009 DuPont. The DuPont Oval Logo, DuPont™, CommercialWrap , DrainWrap™, FlexWrap™, HomeWrap , StraightFlash™, StuccoWrap , ThermaWrap™ and Tyvek are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. K-17993 10/10
®
®
®
®

Submittal Package for DuPont™ Tyvek® CommercialWrap® and

Transcription

Similar documents

risk sheet: asbestos – a natural fibre

The Key to Managing Risk Maintenance Directorate of the

2015-June - MidWest America Federal Credit Union

Dupont Current, August 27, 2014 - Dupont Circle Citizens Association

Cutie - Dupont Hospital

Teflon DuPont employees want blood