catalogo méxico - La Casa de la Fresa
Transcription
catalogo méxico - La Casa de la Fresa
C ATALOGO MÉXICO By Your Side in Dentistry Atención a toda la República Mexicana S íg ue n o s +52 (55)5250-0450 +52(55)5250-3378 Email: [email protected] www.dentalbyk.com A702 A620 Holds Holds 12 Friction Grip Blue Blue A620B Orden México ALUM05 Orden México 9816 ALUM06 0.05 Width (mm) B 6.0 Length (mm) 150 10/Pack 9816 ASTR101 Tels.: (55)5250-0450, (55)5250-3378 CLINICAL STEEL Thickness (mm) Orden México A702B Clinical Separating Strip 23 Straight Handpiece MISCELLANEOUS Aluminum Bur Blocks [email protected] 2 [email protected] Round • Caries excavation • Cavity preparation • Root canal access • Osseous surgery H1 Us No. Head Size (1/10 mm) - 3 5 6 8 009 012 016 018 023 - - - - - Cutting Length (mm) Cirugía Friction Grip 31 - FG (19 mm) Orden México Inverted Cone FG FG FG C01 C02 C03 Us No. 37 Head Size (1/10 mm) 014 Cutting Length (mm) C101 C102 1.4 Friction Grip 31 - FG (19 mm) • Create occlusal locks in cavity preparation Orden México Pear FG C06 H7 • Produce an undercut preparation with round internal line angles Us No. 330 Head Size (1/10 mm) 008 Cutting Length (mm) 2.0 Friction Grip Flat-End Cross-Cut Fissure 31 - FG (19 mm) FG Orden México C08 H31 Us No. 556 558 Head Size (1/10 mm) 009 012 Cutting Length (mm) 4.2 4.2 Friction Grip 31 - FG (19 mm) Orden México FG FG C11 C12 FINISHING CLINICAL CARBIDES 36 H2 • Features a slightly rounded edge on blade corners to reduce chipping which produces a smoother, superior cut 3 36 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Long Flat-End Taper Cross-Cut Fissure End-Cutting Specialty • Mark depth of bone reduction in crown lengthening H33L 700L 702L Head Size (1/10 mm) 010 016 H207 Cutting Length (mm) 6.0 6.0 Us No. 958 Head Size (1/10 mm) 012 Friction Grip Cirugía 31 - FG (19 mm) Orden México FG 36 C16 C103 Cutting Length (mm) 31 - FG (19 mm) FG Orden México Metal Cutters - Friction Grip C27 CLINICAL CARBIDES Us No. Titanium H34L Us No. - Head Size (1/10 mm) 012 H283FQ Cutting Length (mm) 3.5 Us No. Friction Grip 31 - FG (19 mm) FG Orden México C29 - Head Size (1/10 mm) 010 Cutting Length (mm) 8.0 Friction Grip 31 - FG (19 mm) Orthodontic Debonding • Safe removal of residual cement (bonding) after removal of brackets Safe-End Orden México FG C51 Orthodontic Debonding • Removing braces of adhesive and cement • No risk of damaging the natural hard tooth structure • Protective, soft abrasive grit • Alternative to removal with metal instruments • Hard synthetic rubber binder H22ALGK Us No. - Head Size ( /10 mm) 016 Cutting Length (mm) 8.0 1 Friction Grip Orden México 31 - FG (19 mm) Fine (8-12 Blade) Orden México P78 H22ALGK C76 Tels.: (55)5250-0450, (55)5250-3378 4 [email protected] Trimming & Finishing ET® Series - Gingival, Labial & Buccal/Lingual • ET5M, ET7M & ET8.5M - Total Access Series: Suitable for patients with smaller teeth and limited access. Ideal for lower arch restorations. Safe-End Safe-End H274UF H135 H134 ET9 Us No. Head Size ( / mm) 014 Head Size (1/10 mm) 016 Cutting Length (mm) 9.0 Cutting Length (mm) 3.5 ET6 Us No. Head Size ( /10 mm) 014 Cutting Length (mm) 6.0 Us No. 1 1 10 Fine (8 Blade) Orden México - Friction Grip Ultra-Fine (30 Blade) Friction Grip Friction Grip 31 - FG (19 mm) 31 - FG (19 mm) CLINICAL CARBIDES Flame ET6 Fine (8 Blade) ET9* C18 Orden México C21 Orden México C34 H274UF Extra-Fine (16 Blade) Orden México ET6F Extra-Fine (16 Blade) C19 Orden México ET9F Us No. C22 Head Size (1/10 mm) 016 Cutting Length (mm) 3.5 Friction Grip Ultra-Fine (30 Blade) ET6UF Orden México C20 Orden México Anterior: Lateral Incisors Posterior: Buccal/Lingual Fine (8 Blade) Ultra-Fine (30 Blade) ET9UF Orden México C23 C53 Anterior: Central incisors and canines ET® Series - Occlusal/Anterior Lingual Egg Interproximal Safe-End H379 Us No. Head Size (1/10 mm) Cutting Length (mm) 7404 7404 7406 7408 018 023 023 023 3.5 4.2 4.2 4.2 - Head Size ( / mm) 010 Cutting Length (mm) 6.0 Friction Grip 31 - FG (19 mm) 7404 31 - FG (19 mm) 7404 Fine (8-12 Blade) 7406 7408 Ultra-Fine (30 Blade) Orden México Us No. 1 10 Friction Grip Fine (8-12 Blade) Extra-Fine (16 Blade) H50A C50 C24 C25 Orden México H50A C83 C26 Posterior: Initial contouring of posterior restorations Anterior: Lingual contouring of anterior restoration 5 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Serrated Bone Cutters Bone Cutters H162 Us No. Us No. - Head Size ( /10 mm) 016 Head Size (1/10 mm) Cutting Length (mm) 9.0 Cutting Length (mm) 1 Orden México 9.0 Friction Grip Friction Grip 31 - FG (19 mm) 016 31 - FG (19 mm) ✓ Orden México C30 E-Cutter® - Staggered Toothing ✓ C31 EF™ - Fine Staggered Toothing CLINICAL CARBIDES H267 H77E Head Size (1/10 mm) 029 040 Cutting Length (mm) 5.0 9.0 Straight Handpiece HP HP C54 C35 11 - HP (44.5 mm) Orden México H257EF Head Size (1/10 mm) 023 Cutting Length (mm) 13.0 Straight Handpiece 11 - HP (44.5 mm) HP Orden México C57 H139E Head Size (1/10 mm) 023 Cutting Length (mm) 8.0 Straight Handpiece 11 - HP (44.5 mm) Orden México HP C47 Tels.: (55)5250-0450, (55)5250-3378 LABORATORY CARBIDES E-Cutter® - Staggered Toothing 6 [email protected] E-Cutter® - Staggered Toothing H79E H251E Head Size (1/10 mm) 040 Head Size (1/10 mm) 060 Cutting Length (mm) 13.0 Cutting Length (mm) 14.0 Straight Handpiece Straight Handpiece 11 - HP (44.5 mm) LABORATORY CARBIDES Orden México HP 11 - HP (44.5 mm) HP C40 Orden México C42 • Comprehensive range of sizes and anatomical shapes; perfect instrument for every task H79EF Head Size (1/10 mm) 040 Cutting Length (mm) 13.0 • Highly concentric shank ensures precise cutting and a long instrument life Straight Handpiece 11 - HP (44.5 mm) Orden México HP C44 SGE™ - Super-Coarse Staggered Toothing H79SGE Head Size (1/10 mm) 070 Cutting Length (mm) 14.0 Straight Handpiece 11 - HP (44.5 mm) Orden México 7 HP C46 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Round • Frequently used for crown preparation to cut depth guides, occlusal rest preparation, endodontic access, cavity preparation and osseous surgery Cutting Length (mm) 014 018 023 009 - - - - Friction Grip 31 - FG (19 mm) Coarse 6801 6801 6801 6801 Orden México D01 D02 D03 D60 Inverted Cone • Used for dental procedures including cingulum rest preparation, re-creation of occlusal anatomy on crowns or restorations and rapid removal of obsolete restorations 806 807 Head Size (1/10 mm) 014 Head Size (1/10 mm) 018 Cutting Length (mm) 2.65 Cutting Length (mm) 5.0 Friction Grip Friction Grip 31 - FG (19 mm) Coarse Orden México CLINICAL DIAMONDS Head Size (1/10 mm) Peter Brasseler Series™ 801 31 - FG (19 mm) 6806 D05 Tels.: (55)5250-0450, (55)5250-3378 Medium Orden México 807 D06 8 [email protected] Flat-End Parallel • Flat-end parallel diamond instruments create shoulder preparations with a 90° margin Peter Brasseler Series ™ 836 837 Head Size (1/10 mm) 012 018 Head Size (1/10 mm) 014 Cutting Length (mm) 6.0 6.0 Cutting Length (mm) 8.0 Friction Grip Friction Grip 31 - FG (19 mm) 31 - FG (19 mm) CRF™ Coarse Orden México 6836 6836 D07 D08 Orden México 2837 D41 Flat-End Taper CLINICAL DIAMONDS • Flat end tapered diamond instruments create shoulder preparations 847 848 Head Size (1/10 mm) 012 Head Size (1/10 mm) 016 018 014 Cutting Length (mm) 8.0 Cutting Length (mm) 10.0 10.0 10.0 6848 6848 D12 D94 Friction Grip Friction Grip 31 - FG (19 mm) Coarse Orden México 31 - FG (19 mm) 6847 Super-Coarse D10 Coarse Orden México 9 5848 D11 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Round-End Taper 856L Head Size ( /10 mm) 023 016 Head Size (1/10 mm) 016 018 Cutting Length (mm) 10.0 10.0 Cutting Length (mm) 9.0 9.0 6856L 6856L D15 D16 1 Friction Grip Friction Grip 31 - FG (19 mm) Coarse 31 - FG (19 mm) 6850 Coarse CRF™ 2850 D42 D14 Orden México Orden México Round-End Taper Needle • A thin, needle-shape diamond is ideal to break interproximal contact during crown preparation 856 Head Size (1/10 mm) 016 018 018 016 016 021 021 859 Cutting Length (mm) 8.0 8.0 8.0 8.0 8.0 8.0 8.0 Head Size (1/10 mm) 010 Cutting Length (mm) 11.0 Friction Grip 31 - FG (19 mm) Coarse 6856 Orden México Friction Grip 6856 Fine Super-Coarse 8856 D17 D18 CLINICAL DIAMONDS 850 Peter Brasseler Series™ • Round-end tapered or cylindrical diamond instrument create a chamfered preparation • Popular preparation design for full crowns and veneers • Preferred preparation design for porcelain-fused to metal crowns D99 Tels.: (55)5250-0450, (55)5250-3378 8856 8856 D124 5856 5856 D126 D133 31 - FG (19 mm) Medium Orden México 859 D19 D134 10 [email protected] Beveled Parallel Wheel/Donut Peter Brasseler Series™ • Bevel preparation design may be used for porcelain-fused-to-metal or cast gold crowns 909 • Creates a 45°-60° angle 040 1.0 Friction Grip 31 - FG (19 mm) Coarse 886 Orden México Head Size (1/10 mm) 014 Cutting Length (mm) 10.0 6909 D26 Friction Grip 31 - FG (19 mm) Coarse Orden México CLINICAL DIAMONDS Head Size (1/10 mm) Cutting Length (mm) 6886 D25 • Beveled corner of instrument protects the tissue End Cutting 845KR Head Size (1/10 mm) 018 025 Cutting Length (mm) 4.0 4.0 845KR 845KR D34 D93 Friction Grip 10839 31 - FG (19 mm) Head Size (1/10 mm) 012 016 Cutting Length (mm) 1.0 1.4 Friction Grip Medium Orden México 31 - FG (19 mm) Medium Orden México 11 10839 10839 D31 D32 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Egg Football 379 368 DOS1 DOS1 DOS1 Head Size (1/10 mm) 023 023 023 Head Size (1/10 mm) 023 016 Cutting Length (mm) 4.2 4.2 4.2 Cutting Length (mm) 5.0 3.5 6368 6368 D39 D67 Friction Grip Friction Grip 31 - FG (19 mm) 31 - FG (19 mm) Coarse Coarse 6379 Fine Super-Coarse Orden México Orden México 379F 5379 D38 D54 D125 Round-End Taper Depth Cutters • Round-end tapered or cylindrical diamond instrument create a chamfered preparation • Popular preparation design for full crowns and veneers • Preferred preparation design for porcelain-fused to metal crowns • Depth cuts may be used for crowns, veneers, or onlays • Depth guides insure adequate and even tooth reduction • Joining the original depth guides create the preparation form 855 834 Head Size (1/10 mm) 025 Us No. Cutting Length (mm) 7.0 Head Size ( / mm) 016 021 Cutting Length (mm) 6.0 6.0 Depth Cut (mm) 0.3 0.5 31 - FG (19 mm) CRF™ Orden México 2855 D43 LVS2 LVS1 1 10 Friction Grip 31 - FG (19 mm) Medium Two-Grit CLINICAL DIAMONDS Friction Grip Peter Brasseler Series™ Us No. Orden México 834 834 D44 D45 Round-end diamonds create chamfer margin andfacial • reduction for direct and indirect veneer restorations 6844 Us No. LVS4 LVS3 Head Size ( / mm) 014 016 Cutting Length 1 (mm) 10.0 10.0 Cutting Length 2 (mm) 1.5 1.5 Coarse/Fine 6844 6844 Orden México D46 D47 1 10 Friction Grip 31 - FG (19 mm) Tels.: (55)5250-0450, (55)5250-3378 12 [email protected] ET® Series Composite • Used for dental procedures including cingulum rest preparation, re-creation of occlusal anatomy on crowns or restorations and rapid removal of obsolete restorations 135 Us No. DET9 Head Size (1/10 mm) 014 Cutting Length (mm) 9.0 833 Friction Grip 31 - FG (19 mm) Fine Head Size (1/10 mm) 031 016 Cutting Length (mm) 3.5 3.5 8833 8392A D58 D57 Friction Grip 135F 31 - FG (19 mm) H135 (ET9) - Matching Carbide CLINICAL DIAMONDS Orden México Fine D51 Orden México Flame Needle • Choice design for stainless steel and cast gold crowns • May be used on elongated teeth where preparation of the furcation is required • A thin, needle-shape diamond is ideal to break interproximal contact during crown preparation 858 862 Peter Brasseler Series™ 014 8.0 010 014 012 Cutting Length (mm) Cutting Length (mm) 8.0 8.0 8.0 Friction Grip Friction Grip 31 - FG (19 mm) 31 - FG (19 mm) Fine Coarse 8862 Orden México Medium Coarse Orden México 6858 D65 862 6862 D96 D59 D21 Flat-End Taper • Flat end tapered diamond instruments create shoulder preparations 847KR 846 Head Size (1/10 mm) 012 016 Head Size (1/10 mm) 016 Cutting Length (mm) 6.0 6.0 Cutting Length (mm) 8.0 Friction Grip Friction Grip 31 - FG (19 mm) 31 - FG (19 mm) Coarse Orden México 13 Head Size (1/10 mm) Head Size ( /10 mm) 1 6846 6846 D72 D75 Coarse Orden México 6847KR D95 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Barrel Head Size (1/10 mm) 016 Cutting Length (mm) 6.0 811 Friction Grip 31 - FG (19 mm) Medium Orden México Head Size (1/10 mm) 033 846KR Cutting Length (mm) 4.2 D129 Friction Grip 31 - FG (19 mm) Coarse 6811 D137 Orden México Guide Pin KS Series KS 30006 Head Size (1/10 mm) 010 010 012 014 016 031 025 Cutting Length (mm) 7.0 7.0 7.0 8.0 8.0 6.2 9.0 KS1 KS2 KS3 KS5 Friction Grip Head Size (1/10 mm) 020 Cutting Length (mm) 10.0 Friction Grip 31 - FG (19 mm) Super-Coarse - Medium KS0 31 - FG (19 mm) Medium Orden México KS6 KS0F 30006-109 D500 Orden México D92 D117 D77 CLINICAL DIAMONDS 846KR Peter Brasseler Series™ • An anatomically prepared occlusal surface provides adequate clearance and uniform thickness of the restoration • Football and wheel shape diamonds reproduce lingual concavity in crown preparation D78 D79 D120 D80 Crown cutter for zirconium oxide Orden México D501 Tels.: (55)5250-0450, (55)5250-3378 Crown cutter for zirconium oxide The new crown cutter for zirconium oxide restorations 4ZR (”fo(u)r zirconia”) has been developed especially for this particularly tedious and material wearing work. The special bonding leads to much better substance removal and a longer service life, compared to other diamond instruments. 14 LA NUEVA TECNOLOGÍA EN FRESAS DE DIAMANTE PARA PRÓTESIS Diferente por su diseño By Your Side in Dentistry DENTAL INS TRUM EN TATION 15 Tels.: (55)5250-0450, (55)5250-3378 Nuestra línea DuraBraze patentado de Brasseler USA, presenta la nueva tecnología de los instrumentos de diamante para preparaciones. Las fresas de Diamante están hechas con ingeniería y revolucionada mejora, ofreciendo un mejor rendimiento, precisión y previsibilidad a sus procedimientos de preparaciones. “La tecnología de corte de última generación para resultados predecibles” Usted notará una diferencia significativa con DuraBraze. Una Reducción mayor de la estructura dental, siendo más suave y más preciso con menos vibración. Durarán más tiempo, lo que significa menos cambios de fresa y menos tiempo en el sillón para su paciente, con un rendimiento constante después de la preparación. Las fresas DuraBraze cuentan con una nueva tecnología SpotBrazing TM. Este proceso patentado ofrece espacio más abierto entre los cristales de los diamantes creando: • Canales de auto-limpieza naturales para la mínima obstrucción. • Cristales adicionales que comparten el corte para un mayor rendimiento. • Formas más precisas. DuraBraze™ Consistente en el corte Espacio más abierto entre los cristales de diamante para no atascarse. Tels.: (55)5250-0450, (55)5250-3378 16 [email protected] La mejora de esta fresa hace que se autoelimine el lodo dentinario, teniendo espacios más grandes entre los cristales de diamante. RESULTADO: Corte más rápido, menor generación de calor y mínima carga, especialmente en la punta del instrumento. MÁXIMA PRECISIÓN EFICIENCIA DE CORTE Más cristales de diamante están en contacto con la estructura del diente. RESULTADO: Corte consistente y eficiente, ideal para múltiples preparaciones y alta durabilidad de la fresas. Los cristales de diamante están distribuidos en forma uniforme sobre la superficie de la fresa. RESULTADO: Diseño de una preparación predecible y una calidad de tallado inmejorable haciendo la preparación legible. MANEJO MEJORADO Y SUAVE La capa de diamante de precisión ofrece un desgaste ultrasuave, menos vibración y mejor manejo. RESULTADO: Mejora la precisión, el control y la previsibilidad. 17 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com D510 D591 D538 Diamante 018 Medio Diamante Medio Diamante 018 Medio Diamante Medio Diamante Medio 033 D5200 Diamante Medio 014 D5140 Diamante Medio CLINICAL DIAMONDS D512 D526 D5137 Diamante 014 Medio 016 D541 Diamante Medio Tels.: (55)5250-0450, (55)5250-3378 014 18 D5133 Diamante Medio D5201 D531 Diamante Medio Diamante Medio D516 Diamante Medio CLINICAL DIAMONDS D5202 Diamante Medio D518 D542 Diamante Medio D5200 Diamante Medio Diamante Medio 014 D5140 D5203 D596 Diamante Medio 016 016 Diamante Medio 014 Diamante Medio D522 D5204 Diamante Medio Diamante Medio 016 Diamond Cleaning Stone 018 D560 D5205 Diamante Medio D525 Diamante Medio 009 D501 014 014 014 D502 018 Bisel o Curetage D528 Diamante Medio Orden México A10 D519 D5207 010 Diamante Medio D5206 19 Pared axial paralela con una línea de terminación de 45º coronas totales, metal porcelana con cuello o collar metálico Diamante Medio 014 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Flexible Coated HyperFlex™ Single-Sided Safe Side Out Double-Sided 940 919 Head Size (1/10 mm) Head Size (1/10 mm) 200 Coverage (mm) - 11 - HP (44.5 mm) 11 - HP (44.5 mm) Medium 919 940 L = .14 mm Ceramics Fine separating and contouring DIS01 DIS02 Orden México HyperFlex™ Double-Sided Double-Sided 911HP 983 Head Size (1/10 mm) 220 Head Size (1/10 mm) Coverage (mm) 3.0 Coverage (mm) 11 - HP (44.5 mm) 11 - HP (44.5 mm) L = .14 mm Medium 911HP Flexible Serrated 365 Head Size (1/10 mm) Coverage (mm) Straight Handpiece 11 - HP (44.5 mm) Medium Cleaning Brushes & Stones DIS03 Orden México L = .25 mm Ordendiamantados México Piedra de limpieza para instrumentos Open Meshed Disc Double-Sided 9750 Length (mm) 100.0 220Width (mm) 3.0Depth (mm) 24.0 1/Pack 365 934 13.0 Head Size (1/10 mm) 220 9750 Coverage (mm) Straight Handpiece 3.0 11 - HP (44.5 mm) Medium ISCELLANEOUS DIS07 VisionFlex™ Acrylics Separating and contouring Orden México 983 L = .14 mm Ceramics Fine separating and contouring Clockwise rotation only Ceramics/Acrylic Separating and contouring Double-Sided - Straight Handpiece Straight Handpiece Medium 220 DIAMONDS DISCS L = .20 mm Ceramics Separating and rough contouring Orden México - Straight Handpiece Straight Handpiece Medium 220 Coverage (mm) DIS04 Tels.: (55)5250-0450, (55)5250-3378 L = .14 mm 934 Ceramics/Acrylic Orden México DIS06 20 [email protected] VisionFlex™ MiniFlex™ Open Meshed Disc Double-Sided Double-Sided 934 Head Size (1/10 mm) 140 Coverage (mm) 2.0 943 Right-Angle Latch 21 - RA (22 mm) Medium L = .20 mm Orden México Head Size (1/10 mm) 080 Coverage (mm) 1.0 Straight Handpiece 934 11 - HP (44.5 mm) DIS10 Medium DIAMONDS DISCS Orden México Serrated Saw 943 L = .14 mm DIS11 Serrated Saw Double-Sided 987 8964 Head Size (1/10 mm) 300 Coverage (mm) 3.0 Straight Handpiece 11 - HP (44.5 mm) Fine Orden México DIS11 L = .30 mm Plaster/Stone Separation of teeth and refractories Clockwise rotation only. Maximum cutting depth: 11.5 mm. Not recommended for ceramics. Orden México 21 8964 DIS16 Tels.: (55)5250-0450, (55)5250-3378 Gateway™ • Non-perforated diamond strips with Gateway™ Wide Order No. Thickness (mm) Width (mm) Length (mm) Grit Single/Double Sided DS37EF 0.08 3.75 147 Extra-Fine Single DS37F 0.10 3.75 147 Fine Single DS37 0.13 3.75 147 Medium Single FINISHING Orden México DISTR104 DISTR103 DISTR102 Interproximal Strips www.dentalbyk.com LusterPro™ Brushes, Buffs & Felts removing detail • When using diamond paste on carriers, apply in a circular motion with light pressure, maintaining a speed range between 5,000-10,000 rpm • Brushes, felt wheels, chamois wheels, linen and cotton buffs cannot be sterilized 10019HP 190 Head Size (1/10 mm) 11 - HP - Straight Handpiece (44.5 mm) Soft white goat hair Orden México 10019HP M03 220 11 - HP - Straight Handpiece (44.5 mm) Cotton Buff M01 Orden México 15122HP M04 Abbot-Robinson® Bristle Brushes Metal-Robinson ® Bristle Brushes Description Description #11 Soft Length 11/16 Length US No. 0606 US No. 11 - HP - Straight Handpiece (44.5 mm) Orden México M10 Tels.: (55)5250-0450, (55)5250-3378 M02 POLISHING Head Size (1/10 mm) 15122HP Multi-Purpose • #11 Soft 11/16 0606 11 - HP - Straight Handpiece (44.5 mm) Orden México M12 22 [email protected] Heatless Stones Mizzy • Heatless Stones with magnesium bond • For heat-reduced grinding of ceramics and metal alloys • Recommended speed: 5,000-10,000 rpm • Store in dry place FELT Head Size (1/10 mm) 200 Cutting Length (mm) 3.0 777A Unmounted 10/Pack FELT 220 Cutting Length (mm) 3.0 220 220 3.0 3.0 130/medium 140/coarse Grit Unmounted Use Mandrel 305.11 Felt paste carrier for polishing paste Orden México Head Size (1/10 mm) 25/Pack M11 777A.00.110 777A.00.130 777A.00.140 Use Mandrel 305.11 Orden México A12 MetaPro™ Brown, Green & Super Green Silicone Polishers 0053.31 0153.31 Head Size (1/10 mm) 030 Head Size (1/10 mm) 030 Cutting Length (mm) 6.0 Cutting Length (mm) 6.0 coarse Grit 31 - FG - Friction Grip (19 mm) medium 31 - FG - Friction Grip (19 mm) Orden México P01 0153.31.030 Orden México P02 Metal 0053.31.030 • Silicone polishing system for acrylic prosthetic and treatment appliances without the use of pumice • A harder matrix material is utilized to increase polisher durability and to make it ideally suited for denture adjustment • Sterilization: Autoclave 0644 0634 Head Size (1/10 mm) 100 Head Size (1/10 mm) 100 Cutting Length (mm) 24.0 Cutting Length (mm) 24.0 Grit Grit coarse 11 - HP - Straight Handpiece (44.5 mm) Orden México P03 medium 11 - HP - Straight Handpiece (44.5 mm) 0644.11 0634.11 23 POLISHING AcryliPro™ Enduro Acrylic Polishers Orden México Acrylic Grit P04 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com AcryliPro Acrylic Polishers ™ Acrylic • Silicone polishing system for acrylic prosthetic and treatment appliances without the use of pumice • Recommended speed: coarse & • Sterilization: Autoclave 0654 Head Size (1/10 mm) 100 Cutting Length (mm) 24.0 Grit POLISHING 11 - HP - Straight Handpiece (44.5 mm) CeramiPro™ Ceramic Polishers (Universal Standard) • Recommended speed: white = 5,000-12,000 rpm; pink = 5,000 rpm; gray = 10,000 rpm • Sterilization: Autoclave 0301 Head Size (1/10 mm) 220 Cutting Length (mm) Porcelain Grit 3.0 coarse Unmounted 10/Pack Orden México 0301.00.220 P09 Dialite® Porcelain Polishers Extra-Oral Points Extra-Oral Wheels H2 R17 Head Size (1/10 mm) 170 Head Size (1/10 mm) 040 Cutting Length (mm) 2.5 Cutting Length (mm) 13.0 Grit Grit 11 - HP - Straight Handpiece (44.5 mm) 11 - HP - Straight Handpiece (44.5 mm) 1/Pack Orden México R17D.11 P19 Tels.: (55)5250-0450, (55)5250-3378 1/Pack H2D11 Orden México P20 24 [email protected] 0352C.21 0362C.21 Porcelain CeramiPro™ Ceramic Polishers (Universal Standard) 0372C Head Size ( /10 mm) 050 Head Size ( /10 mm) 050 Head Size (1/10 mm) 050 Cutting Length (mm) 10.0 Cutting Length (mm) 10.0 Cutting Length (mm) 10.0 Grit coarse 21 - RA - Right-Angle Latch (22 mm) 0352C.21 Orden México P25 1 Grit medium Grit 21 - RA - Right-Angle Latch (22 mm) 21 - RA - Right-Angle Latch (22 mm) Orden México P26 Orden México P27 POLISHING 1 ComposiPro™ Composite One-Step Polishers • One-step diamond impregnated polishers, designed to rapidly polish hard-setting composites • Achieve ultra-smooth surface and shine simply by varying the working pressure • C801001 C801002 C801003 Head Size (1/10 mm) 060 Head Size (1/10 mm) 050 Head Size (1/10 mm) 100 Cutting Length (mm) 10.0 Cutting Length (mm) 10.0 Cutting Length (mm) 1.0 Grit Grit Grit 21 - RA - Right-Angle Latch (22 mm) 21 - RA - Right-Angle Latch (22 mm) 21 - RA - Right-Angle Latch (22 mm) C801001.21 Orden México P58 C801002.21 Orden México Composite • Utilize with minimal water to produce a wet polishing environment • Recommended speed: 5,000-7,000 rpm • Sterilization: Autoclave C801003.21 P59 Orden México P60 ComposiPro™ Brushes • and finish polish,achieving a smooth, natural “wet-look” on composite, compomer and glass ionomer materials • They may also be used during prophylactic treatment to remove discoloration • Recommended speed: 5,000-7,000 rpm • Sterilization: Autoclave D209001 D209002 D209003 Head Size (1/10 mm) 075 Head Size (1/10 mm) 050 Head Size (1/10 mm) 047 Cutting Length (mm) 5.0 Cutting Length (mm) 6.0 Cutting Length (mm) 6.0 Grit Grit Grit 21 - RA - Right-Angle Latch (22 mm) 21 - RA - Right-Angle Latch (22 mm) 21 - RA - Right-Angle Latch (22 mm) D209001.21 Orden México 25 P61 D209002.21 Orden México P62 D209003.21 Orden México P63 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Diacomp® Composite Polishers • compomer and glass ionomers • Wet polishing is recommended • Recommended speed: 5,000-10,000 rpm • Sterilization: Autoclave Head Size (1/10 mm) Cutting Length (mm) Grit 040 040 10.0 10.0 Composite DC1M medium 21 - RA - Right-Angle Latch (22 mm) DC1.21 DC1M.21 Dialite® Porcelain Polishers • Diamond impregnated three-step porcelain polishing system ideal for adjusting and polishing feldspathic porcelain restorations • Available in Dialite® and Dialite® HP (High Performance) • Available in intra-oral and extra-oral • Recommended speed: Intra-Oral 5,000-7,000 rpm; Extra-Oral 7,000-10,000 rpm • Sterilization: Autoclave POLISHING P64 Orden México W16 Head Size (1/10 mm) 040 040 040 Cutting Length (mm) 10.0 10.0 10.0 coarse medium Grit Porcelain Intra-Oral Points 21 - RA - Right-Angle Latch (22 mm) W16DGASST Orden México P65 Tels.: (55)5250-0450, (55)5250-3378 26 [email protected] Dialite® LD Polishers for Lithium Disilicate • Diamond impregnated two-step porcelain polishing system allows Lithium Disilicate restorations to reach full potential • • Recommended speed: Intra-Oral 5,000-7,000 rpm; Extra-Oral 7,000-10,000 rpm • Sterilization: Autoclave Intra-Oral Points Extra-Oral Wheels Lithium Disilicate W16LD Head Size (1/10 mm) 040 040 Cutting Length (mm) 10.0 10.0 Grit medium Head Size (1/10 mm) 21 - RA - Right-Angle Latch (22 mm) Orden México R17LD Cutting Length (mm) W16MLD.RA W16FLD.RA P66 P67 Grit 170 170 2.5 2.5 medium 11 - HP - Straight Handpiece (44.5 mm) Orden México R17MLD.HP R17FLD.HP P70 P71 Extra-Oral Points POLISHING H2LD Head Size (1/10 mm) 040 040 Cutting Length (mm) 13.0 13.0 Grit medium 11 - HP - Straight Handpiece (44.5 mm) Orden México H2MLD.HP H2FLD.HP P68 P69 Orden México 27 P100 Tels.: (55)5250-0450, (55)5250-3378 www.dentalbyk.com Dialite® ZR Polishers for Zirconia Extra-Oral Points Extra-Oral Wheels H2ZR R17ZR Head Size (1/10 mm) 040 040 Head Size (1/10 mm) 170 170 Cutting Length (mm) 13.0 13.0 Cutting Length (mm) 2.5 2.5 medium Grit 11 - HP - Straight Handpiece (44.5 mm) Orden México medium 11 - HP - Straight Handpiece (44.5 mm) H2MZR.HP H2FZR.HP P74 P75 Orden México R17MZR.HP R17FZR.HP P76 P77 Zirconia Grit Dialite® ZR Polishers for Zirconia • Recommended speed: Intra-Oral 5,000-7,000 rpm; Extra-Oral 7,000-10,000 rpm • Sterilization: Autoclave Intra-Oral Points POLISHING • Diamond impregnated two-step porcelain polishing system allows Zirconia restorations to reach full potential W16ZR Head Size (1/10 mm) 040 040 Cutting Length (mm) 10.0 10.0 Grit medium Orden México W16MZR.RA W16FZR.RA P72 P73 Tels.: (55)5250-0450, (55)5250-3378 Zirconia 21 - RA - Right-Angle Latch (22 mm) 28 +52 (55)5250-0450 +52(55)5250-3378 Email: [email protected] www.dentalbyk.com