brevini subsidiaries around the world

Transcription

brevini subsidiaries around the world
Construction
Earthmoving
BREVINI SUBSIDIARIES AROUND THE WORLD
Brevini Headquarters
Brevini Benelux
Brevini France
Brevini Denmark
Brevini Ireland
Brevini España
Brevini Norge
Brevini Finland
Brevini Svenska
Brevini India
Brevini Latino Americana
Bad Homburg - Mammendorf GERMANY
Brevini China
Brevini South East Asia
Brevini Romania
Brevini Korea
Brevini Australia
Brevini S. Africa
Brevini Japan
Brevini USA
Brevini New Zeland
Brevini Canada
Reggio Emilia - ITALY
Brevini Lombarda
Bergamo - ITALY
Brevini Veneta
Rovigo - ITALY
Brevini Centrosud
Roma - ITALY
Brevini UK
Warrington - ENGLAND
Brevini Germany
Brasov - ROMANIA
Johannesburg - SOUTH AFRICA
Greenmount Auckland NEW ZELAND
Alphen aan de Rijn NETHERLANDS
Karlslunde - DENMARK
Madrid - SPAIN
Espoo - FINLAND
Mumbai - Bangalore - INDIA
Shangai - Beijing - CHINA
Seul - KOREA
Kobe - JAPAN
Toronto - CANADA
Vaulx en Velin Cedex - Vertou FRANCE
Allenwood Naas - IRELAND
Larvik - NORWAY
Norrköping - SWEDEN
Limeira, São Paulo - BRAZIL
SINGAPORE
Kinks Park - NSW - AUSTRALIA
Yorktown, Indiana - USA
Detroit, Michigan - USA
Brevini de Mexico
Querétaro, Mexico
Brevini Fluid Power USA, Inc.
14141 W. Brevini Drive Yorktown,
IN 47396
Main Phone: (765) 759-2390
fax Main Fax: (765) 759-2399
[email protected]
Brevini USA, Inc.
14141 W. Brevini Drive Yorktown,
IN 47396
Toll free USA (888)
BREVINI (888-273-8464)
Main Phone: (765) 759-2300
fax Main Fax: (765) 759-2301
[email protected]
www.breviniusa.com
The Brevini Industrial Group is a market leader in two strategic business areas: mechanical
transmissions and hydraulic systems.
The companies manufacturing planetary gear drives, helical and bevel helical gearboxes,
winches are managed together in the business unit Brevini Power Transmission and the
companies manufacturing hydraulic power packs, axial pumps, orbital and axial motors,
proportional directional control valves gear pumps and motors and customized systems
with electronic control are managed in the business unit Brevini Fluid Power.
Present with a direct network in the main world markets, Brevini Power Transmission and
Brevini Fluid Power are global players tanks to strong competitive advantages: full product
range, worldwide service, experience in all possible applications: both on mobile machines
and on industrial equipments. Brevini Power Transmission now has a consolidated turnover
of 320 million Euro with 1.700 employees, Brevini Fluid Power a consolidated of 115 million
Euro with 750 employees.
The integration of our product range in the Earthmoving and Construction sector makes
Brevini an even stronger player in the world of systems for mobile machinery.
The variety of compact products now available – covering every OEM’s necessity, from load
holding valves and power packs to heavy duty track drives – puts Brevini in the position to
act as a partner in the design of safe, performing and cost effective mobile machines.
All our product lines have their own range of standard products, and we also work in
co-operation with our customers to develop custom solutions for the most demanding
applications.
The Brevini industrial Group has integrated manufacturing plants in the USA, in China, in
Germany and Italy.
O N E S U P P L I E R , O N E S O L UT I O N
Brevini’s slewing drives are an essential component on equipment such as tower cranes, wind turbines, aerial platforms, discharge booms and excavation and construction equipment. Brevini produces the
slewing drives also in gearmotor version, with integrated hydraulic motor and brake, specifically designed
for mini-excavators and mobile machines.
Technical Data:
Torque (T2max) up to 99,630 lb-ft
Transmission Ratio: up to 355 iN
Sensors, load cells, electronic devices
Focused on customer’s requirements, BPE Electronics manufactures dedicated products and can supply
complete customised control systems, including housings, electric harnesses and sensors.
BPE Electronics systems can manage complete machine movements with built in limitation controls: geometric and/or overload controls, automatic proportional self levelling systems, tilt switches, calibration and
diagnostic interfaces, angle/length sensors, load cells according with highest European safety standards
(EN13849-1 PLd). BPE Electronics is supplying most of European leader manufacturers of aerial platforms, telehandlers, truck mounted cranes, mobile and tower cranes, winches, hoists.
Low - speed, high - torque (LSHT) motors
SAM Hydraulik line of low – speed, high – torque (LSHT) motors provide power ranging up to 14140 inch
pounds of torque.
A complete range of sizes is offered in small, medium and large frame with displacements from 0.78 cu.in
to 31.9 cu.in. Motor options include output shaft size and type, mounting flange type, porting type and a
wide selection of special features such as brakes, sensors, valves and corrosion protection. With its 35
years of experience in the design and manufacture of LSHT motors, SAM Hydraulik is confident in offering
worldwide for winch, swing drives, sweeper brush drives, auger conveyors, car wash, turf propel, mixers
/ grinders, platforms.
HPV proportional directional valve
HPV41 and HPV77 can be combined with bankable valves through a simple interface. This feature is
highly appreciated in case of high flow differences between the controlled actuators.
Typical applications: drilling machines, telescoping cranes, mixer feeder and forestry machines.
HPV310 Proportional directional valve for high flow available in 2 series: Size 28 (up to 83,2 gpm), Size
35 (up to 130 gpm)
This new HPV can be combined with HPV41 and HPV77 to offer a higher flexibility.
Typical applications: multi functional rotary drilling rigs, hydraulic truck cranes, offshore deck cranes, crawler cranes, offshore drilling equipments and hydraulic diaphragm grabs.
HPV proportional directional valve Atex version
The electro-hydraulic modules have been designed in conformity with ATEX 94/9/EC directive, Group II,
category 2GD.
The modules are manufactured with electric control and can be sold individually or assembled as a complete valve.
Available in a variety of options the joysticks offer a sensitive, precise, proportional control thanks to the
possibility of changing the electrical parameter in a continuous way.
The “S Series” is the optimum proposal for all applications requiring high torque with minimum dimensions, on fixed
industrial equipment and also self-propelled machines. This epicyclic solution is preferable to solutions with traditional gear units as it offers an improvement of 60% in terms of space and weight.
The main characteristics of this new Brevini range are:
- 13 harmonically developed sizes, from 35,100 lb-ft to 1,845,500 lb-ft nominal torque
- In line and right angle execution up to 4 reduction stages
- Output versions: female splined, hollow cylindrical for shaft-mounting, male cylindrical and male splined shaft
POSIRED 2 Parallel Shaft and Right Angle Gearboxes
High degree of standardisation, consistent modularity with a large number of standard options and a great variety of
versions guarantee optimal adaptation in almost all areas of mechanical and system construction.
Technical Data:
Torque (T2max): up to 738,000 lb-ft
Transmission Ratio: up to 710 iN
Power Rating: up to 5,900 Hp
Modular and Monoblock directional valve
VPS Brevini DCV features max working pressure up to 5800 psi and max flow up to 59.8 gpm
Main features: VPS Brevini mobile valves assure low leakages and long lasting efficiency thanks to cast iron shell
moulding.
Every valve is 100% tested before entering the market
Typical applications: construction machines, concrete and mining applications, cranes, agricultural machines
Gear pumps & motors, flow dividers
OT Oiltechnology gear pumps and motors are available in 3 series with displacements from 0.06 cu.in to 3.86
cu.in. Max pressure up to 4350 psi.
This range features extruded aluminium alloy body for high pressures, hardened steel gears, PTFE / bronze based bushings for long life and high performances, pressure compensated bearings in anti-friction alloy, cast iron
flanges & covers.
Typical applications: agricultural machines, building and construction machines, handling machines, industrial
equipment.
Medium duty closed circuit variable pump
MD10V series of swash plate pumps is offered in 3 frames and 7 displacements from 0.86 cu.in to 3.9 cu.in.
Pressure and speed specifications: to 5075 psi and speed up to 3600 rpm.
Main applications: skid steer loaders, pavers, compactors, trenchers, platforms, compact wheel loaders, fan drive,
small concrete mixer, agricultural machines and equipment.
Pump options include single or tandem pumps through drive, output shaft type, wide selection of controls.
Axial piston pump S6CV
S6CV pump is available 2 displacements: 4.57 cu.in and 7.93 cu.in. Max pressure up to 6090 psi.
Main features: specifically designed for use in closed circuit hydrostatic transmission, it is extremely versatile thanks
to a wide range of controls and accessories. Typical applications: construction and earth moving machinery, agricultural and forestry machines, marine and off-shore equipment.
These new gear reducers, which are protected by a specifi c patent, feature a combination of planetary and helical/
bevel helical gears that takes advantage of the strengths of each technology: compactsize, reliability and easy
maintenance.
PH series, parallel axis version combines one slow helical stage with one or more planetary stages.
BPH series, right angle gearboxes combines one slow helical stage with a bevel Gleason pair and one or more
planetary stages.
Compact planetary track drive units, specifically designed for use on tracked vehicles: excavators and earthmoving
machines.
This range of gearboxes has high strength structure, short overall length, very high radial and axial load capability.
All the gearboxes are provided with integral multidisc failsafe brake and allow the direct mounting of hydraulic motors
at the gearbox input.
Technical Data:
Torque (T2max) up to 125,500 lb-ft
Transmission Ratio: up to 230 iN
Brevini Winches designs and manufactures hydraulic and electric hoisting and pulling winches for various sectors:
winches for the drilling sector, compact winches for truck cranes, high speed winches for self-propelled cranes,
winches for tow trucks, and special solutions. Besides a wide range of accessories such as ropes, hooks, pulleys
and blocks, Brevini Winches can also provide safety devices such as empty drum sensors, drums with standard or
special grooves, pressure rollers and automatic rope guide systems, and mechanical load limit devices.
Technical Data:
Line pull: from 2,204 lb up to 66,120 lb
Axial piston open circuit variable pump (S5AV)
S5AV is available in 6 displacements: from 1.95 cu.in to 5.67 cu.in. Max pressure up to 6090 psi.
Main features: excellent power/weight ratio, wide range of controls, through drive shaft options, capability to limit
both the maximum and minimum displacement settings.
Typical applications: quarry and mining equipment, road construction and building applications, marine & offshore
applications.
7 Sizes
Nominal Output Torque up to 25,900 lb-ft (T2 iso )
Ratios up to 6.083
Axial piston fixed motor /pump
SH11C series are bent axis, fixed displacement heavy duty motor / pump. The 40° angle between shaft and cylinder
barrel allows for a very compact, lightweight motor / pump. Operating pressure up to 7000 psi provides for high
output power capability.
Features and benefits: lens shape valve plate, heavy duty roller bearings, FKM fluorocarbon shaft seal, motors /
pumps options include a wide range of output shaft size and type, ISO and SAE mounting flange, rear and side
ports, speed sensors and valves.
Available in 8 displacements: from 3.41 cu.in to 10.98 cu.in
Brevini’s Standard Series in-line or right angle planetary gearboxes can be used in a wide range of industrial
equipment and mobile applications. They are based upon a flexible modular system and are available with either
male or female output shaft configurations. The flange mounted gearboxes are supported by a wide range of accessories: adaptors for electric and hydraulic motors, multidisc failsafe brakes and male input shaft configurations.
Technical Data:
15 sizes, from 738 lb-ft to 18,500 lb-ft nominal torque
Transmission Ratio: up to 3.150 iN
Axial piston variable motor SH7V
Designed to perform up to 7000 psi pressure peak and 4500 rpm, SH7V series of bent axis variable displacement
motors meets requirements of the modern machines. Displacements available: 3.72 cu.in 4.91 cu.in, 6.86 cu.in,
9.81 cu.in.
Features and benefits: 0° displacement capability, lens shape valve plate, tapered roller bearings, FKM fluorocarbon
shaft seal.
Motor options include a wide range of shaft size and type, ISO and SAE mounting flange, rear and side ports, a wide
selection of controls, speed sensors and valves.