No: U144305E1, 2 Version Designation of equipment under test

Transcription

No: U144305E1, 2 Version Designation of equipment under test
Königswinkel 10
32825 Blomberg
Phone +49 5235 / 9500-0
Fax
+49 5235 / 9500-10
Test Report
No: U144305E1, 2nd Version
Designation of equipment under test: KVM Matrix switch system
- DVICenter DP32
- U2-R-CPU
- U2-R-CON
- DVI-U-CPU-MC2-UC
- DVI-U-CON-MC4
- MultiPower 12
- MultiPower 6
- PowerSet12 Typ 3
SinPro SPU25A-105
- PowerSet12 Typ 2
SinPro SPU25A-105
Test Laboratory
for
"Safety of Electrical Equipment and
Industrial Low-Voltage Devices
as well as Environmental Tests"
accredited by
DAkkS Deutsche Akkreditierungsstelle GmbH
in compliance with DIN EN ISO/IEC 17025
under
Reg. No. D-PL-17186-01-03
The copying of excerpts from this report is not permitted without written the consent of the testing body.
The test results indicated in this report refer exclusively to the equipment under test specified below. It is
not permitted to transfer the results to other systems or configurations.
Testing body:
PHOENIX TESTLAB GmbH
Königswinkel 10
D-32825 Blomberg
Applicant:
Guntermann & Drunck GmbH
Dortmunder Str. 4a
D-57234 Wilnsdorf
Order number:
14-114305
Type of test:
Environmental test:
-
Test base:
Vibration, sinusoidal
Dry heat, storage
Dry heat, functional test
Cold, functional test
Damp heat, functional test
Exceptional power supply
EN 60068-2-1 : 2008
EN 60068-2-2 : 2008
EN 60068-2-6 : 2008
EN 60068-2-30 : 2005
IEC 60945 : 2002
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 2 of 147
Equipment
under test:
KVM Matrix switch system
EUT
Type
S.N.
Art. Nr.
144305 – A
DVICenter DP32
GD03097064
A2300035
144305 – B
U2-R-CPU
GD03097062
A2320063
144305 – C
U2-R-CON
GD03097063
A1120151
144305 – D
DVI-U-CPU-MC2-UC
GD03097061
A2320111
144305 – E
DVI-U-CON-MC4
GD03097060
A1120178
144305 – F
MultiPower 12
GD08001985
A4110036
144305 – G
MultiPower 6
GD08001984
A4110035
144305 - H
PowerSet12 Typ 3
SinPro SPU25A-105
C36769651344
A4110013
144305 - W
PowerSet12 Typ 2
SinPro SPU63-105
C33088081246
A4110008
Manufacturer:
See applicant
Date equipment
was received:
20 August 2014
Test specifications:
EN 60068-2-1 : 2008
EN 60068-2-2 : 2008
EN 60068-2-6 : 2008
EN 60068-2-30 : 2005
IEC 60945 : 2002
Customer represented
during the test by the
following person(s):
--Place of testing:
PHOENIX TESTLAB GmbH, Blomberg
Date of testing:
21 August 2014 to 17 September 2014
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 3 of 147
Test result:
Test requirements and conditions are present in the following
chapters.
The requirements made in the test documents were fulfilled by
the equipment under test.
Blomberg, 03 November 2014
Testengineer: Frank Nothnagel
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
Authorized reviewer: Michael Jonca
U144305E1, 2
14-114305
nd
Version
Page 4 of 147
Contents
Page
1 Test specifications and test conditions ......................................................................... 6
1.1 Dry heat, storage ................................................................................................... 6
1.2 Dry heat, functional test ......................................................................................... 7
1.3 Cold, low temperature functional test..................................................................... 8
1.4 Damp heat, functional test ..................................................................................... 9
1.5 Vibration............................................................................................................... 10
1.6 Excessive power supply ....................................................................................... 12
1.7 Operating states and test set-up .......................................................................... 13
1.8 Monitoring of the EUT during the Test ................................................................. 21
2 Test performance and test results .............................................................................. 27
2.1 Test performance ................................................................................................. 27
2.2 Test results .......................................................................................................... 28
2.2.1 Resonance search ......................................................................................... 28
2.2.2 Vibration, sinusoidal ....................................................................................... 34
2.2.3 Dry heat, storage test ..................................................................................... 37
2.2.4 Dry heat, Functional test ................................................................................ 37
2.2.5 Cold, Low temperature Functional test .......................................................... 38
2.2.6 Damp heat, Functional test ............................................................................ 38
2.2.7 Excessive power supply ................................................................................. 39
3 List of measurement equipment ................................................................................. 40
4 Pictures ...................................................................................................................... 41
5 List of pictures .......................................................................................................... 143
6 List of Diagrams........................................................................................................ 145
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 5 of 147
1 Test specifications and test conditions
1.1 Dry heat, storage
Test B: Dry heat / EN 60068-2-2; chapter 8.2.1, IEC 60945
To simulate the effects of temperature stress on equipment in the non-operating
(un-powered) mode. A temperature of +70 °C is the maximum likely to be
encountered in enclosed spaces on ships and in equipment exposed to the full
effects of solar radiation in ports.
The EUT shall be placed in a chamber at normal room temperature and relative
humidity. The temperature shall then be raised to and maintained at 70 °C ± 3 °C,
for a period of 10 h to 16 h.
At the end of the test, the EUT shall be returned to normal environmental conditions and then subjected to a performance check as specified in the relevant
equipment standard (see 7.1; IEC 60945).
Test Severity
Temperature
+70 °C ± 3 °C
Duration
16 hours
Voltage during performance check
U = 90 V / 264 V ; f = 47.5 Hz / 63 Hz
(Extreme power supply variation)
Nominal voltage range 100 V … 240 V
Voltage variation ± 10 %
Frequency variation ± 5 %
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 6 of 147
1.2 Dry heat, functional test
Test B: Dry heat / EN 60068-2-2; chapter 8.2.2, IEC 60945
This test determines the ability of equipment to be operated at high ambient temperatures and operate through temperature changes. The reasonable maximum
air temperature likely to be encountered over the sea is +32 °C and the maximum
solar gain at sea is +23 °C giving +55 °C as the maximum temperature likely to be
encountered by ships at sea.
The EUT shall be placed in a test chamber at room temperature. The EUT and, if
appropriate, any climatic control devices with which it is provided shall then be
switched on. The temperature shall then be raised to and maintained at +55 °C ±
3 °C.
At the end of a soak period of 10 to 16 hours at +55 °C ± 3 °C, the EUT shall be
subjected to a performance test and check as specified in the relevant equipment
standard (see 7.1).
The temperature of the chamber shall be maintained at +55 °C ± 3 °C during the
whole performance test period.
At the end of the test, the EUT shall be returned to normal environmental conditions.
Test Severity
Temperature
+ 55 °C ± 3 °C
Duration
16 hours
Voltage during performance test
U = 100 V / 240 V; f = 50 Hz / 60 Hz
(Normal power supply)
Voltage during performance check
U = 90 V / 264 V ; f = 47.5 Hz / 63 Hz
(Extreme power supply variation)
Nominal voltage range 100 V … 240 V
Voltage variation ± 10 %
Frequency variation ± 5 %
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 7 of 147
1.3 Cold, low temperature functional test
Test A: Cold / EN 60068-2-1; chapter 8.4.2.4, IEC 60945
This test determines the ability of equipment to be operated at low temperatures
and also to demonstrate the ability of equipment to start up a low ambient temperature.
The EUT shall be placed in a test chamber at room temperature. The temperature
shall then be reduced to, and maintained at -15 °C ± 3 °C, for a period of 10 h to
16 h. Any climatic control devices provided in the EUT may be switched on at the
conclusion of this period.
The EUT shall be switched on 30 minutes later, or after such a period as agreed
by the manufacturer, and shall be kept operational for at least 2 h during which
period the EUT shall be subjected to a performance test and check as specified in
the relative equipment standard (see 7.1).
The temperature of the chamber shall be maintained at - 15 °C ± 3 °C during the
whole test period.
At the end of the test the EUT shall be returned to normal environmental conditions.
Test Severity
Temperature
-15 °C ± 3 °C
Duration
16 hours
Voltage during performance test
U = 100 V / 240 V; f = 50 Hz / 60 Hz
(Normal power supply)
Voltage during performance check
U = 90 V / 264 V ; f = 47.5 Hz / 63 Hz
(Extreme power supply variation)
Nominal voltage range 100 V … 240 V
Voltage variation ± 10 %
Frequency variation ± 5 %
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 8 of 147
1.4 Damp heat, functional test
Test Db: Damp heat / EN 60068-2-30; chapter 8.3, IEC 60945
This test determines the ability of equipment to be operated under conditions of
high humidity.
The EUT shall be placed in a test chamber at room temperature. The temperature
shall then be raised to + 40 °C ± 2 °C, and the relative humidity raised to 93 % ±
3 % over a period of 3 h ± 0.5 h. These conditions shall
be maintained for a period of 10 h to 16 h. Any climatic control devices provided in
the EUT may be switched on at the conclusion of this period.
The EUT shall be switched on 30 minutes later, or after such a period as agreed
by the manufacturer, and shall be kept operational for at least 2 h during which
period the EUT shall be subjected to a performance check as specified in the relevant equipment standards.
The temperature and relative humidity of the chamber shall be maintained as
specified during the whole test period.
At the end of the test period and with the EUT still in the chamber, the chamber
shall be brought to room temperature in not less than 1 h.
At the end of the test the EUT shall be returned to normal environmental conditions.
Test Severity
Temperature
+ 40 °C ± 2 °C
Relative humidity
93 % ± 3 %
Duration
16 hours (1 cycle)
Voltage during performance check
U = 100 V / 240 V; f = 50 Hz / 60 Hz
(Normal power supply)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 9 of 147
1.5 Vibration
Test Fc: Vibration, sinusoidal / EN 60068-2-6
This test determines the ability of equipment to withstand vibration without resulting in mechanical weakness or degradation in performance.
The test simulates the effect of vibration induced in a ship's hull by its propeller
and machinery. This is generally at frequencies of up to 13 Hz and predominantly vertical.
The tests at higher frequencies simulate the effect of slamming which occurs in
irregular stormy seas, and is predominantly horizontal. The test does not simulate the effect of regular seas giving the translational components of surging,
swaying and heaving, and the corresponding rotational components of rolling,
pitching and yawing which generally produce accelerations too small to be of
consequence to electronic equipment.
A resonance search shall be carried out throughout the test.
During the resonance search the EUT shall be externally observed, by unaided
visual and aural means, for obvious signs of any resonances of components or
sub-assemblies, which may affect the integrity of the EUT. Such observations
shall be recorded in the test report.
If any resonance, as measured by a sensor fixed to the outside of the EUT at the
location where obvious signs of resonance have been observed, has a magnitude ratio 5 measured relative to the surface where the EUT is fastened, the
EUT shall be subjected to a vibration endurance test at each resonant frequency
at the vibration level specified in the test with a duration of 2 h.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 10 of 147
When resonant frequencies with magnitude ratios 5 are harmonically related,
only the fundamental shall be tested. If no resonance with a magnitude ratio 5
occurs, the endurance test shall be carried out at one single observed frequency. If no resonance occurred, the endurance test shall be carried out at a frequency of 30 Hz.
Performance check(s) shall be carried out at least once during each endurance
test period, and once before the end of each endurance test period.
The procedure shall be repeated with vibration in each of two mutually perpendicular directions in the horizontal plane.
Test Severity
Frequency range
5 Hz to 100 Hz
Cross-over frequency
13.2 Hz
Displacement amplitude below the crossover frequency
1 mm
Acceleration amplitude above the cross-over
frequency
7 m/s²
Sweep rate
0.5 octaves/min
Axis
X, Y, Z
Voltage during Performance checks
U = 100 V / 240 V; f = 50 Hz / 60 Hz
(Normal power supply)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 11 of 147
1.6 Excessive power supply
These conditions exceed the extreme test conditions in which the EUT is required to operate, with or without performance degradation, as indicated in the
equipment standard. Excessive current is defined as greater than normal working current.
Excessive voltage is greater than specified in 5.2.2. Protection shall be provided
against such excesses at an appropriate level chosen by the manufacturer and,
when activated, may require the EUT to be reset, for example by fuse replacement. The power supply shall be adjusted to cause activation of the protection
and after EUT reset, a performance check under normal test conditions shall be
carried out.
Power supply misconnections are also regarded as excessive conditions. Where
appropriate, the EUT shall be subjected to an input from a power supply of reversed polarity or improper phase sequence for a period of 5 min. After completion of the test, and reset of the protection of the EUT, if required, the power
supply shall be connected normally and a performance check shall be carried
out.
Test Severity
Temperature
20 °C
Duration
5 minutes
Voltage during Excessive power supply
U=288V f= 50 Hz / 60 Hz
Voltage during performance check
U = 100 V / 240 V; f = 50 Hz / 60 Hz
(Normal power supply)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 12 of 147
1.7 Operating states and test set-up
Provided for testing is a complex assembly of devices in a KVM matrix switch system. For these purposes, a digital KVM matrix switch (DVICenter DP32) with PC
connecting devices (targets: DVI-U-CPU-MC2-UC, U2-R-CPU) and console
devices ( DVI-U-CON-MC4, U2-R-CON) with related power supplies (Multipower12, MultiPower-6, SinPro SPU25A-105 and SinPro SPU63-105) was built.
As test equipment a PC (signal source), monitors (display video signal), keyboards and mouse were used to control the complete system.
The logging function of A (DVICenter DP32) allows the observation of the KVM
system for malfunctions. The monitoring function allows also the logging of events
without functional effects like:
-
Voltage drop at power supply of A - H and W (A - E directly and F, G, H, W
indirectly)
-
Malfunctions and transmission errors at the CAT.x ethernet cables
-
Data connection errors to the devices B, C, D and E
The logging is done by the PC. The Monitoring and the description is provided by
the applicant.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 13 of 147
Picture 1: Schematic test setup
230VAC
Z
AA
X
AB
PowerCord 5m
Y
SubD9 5m
10
4
F
G
PowerCord 5m
AC
PowerLoop 1m
PowerLoop 1m
K
USB 5m
C
CAT.x 5m
B
CAT.x 5m
RS232 5m
Ethernet 5m
M
USB-Service an J
N
A
J
DVI-D 5m
AD
DVI-D 1,8m
USB 5m
Line In Audio 5m
USB
1,8m
AE
V
CAT.x 5m
CAT.x 5m
CAT.x 5m
DVI-D 5m
CAT.x 5m
DVI-D 5m
CAT.x 5m
CAT.x 5m
O
D
AF
E
R
S
TwinPS/2
5m
Line Out Audio 5m
230VAC
T
H
U
W
L
AG
P
Q
230VAC
K: USB2.0- Flashdrive
A: DVICenter DP32
B: U2-R-CPU
(Intenso, yellow)
C: U2-R-CON
L: USB2.0- Flashdrive
(PNY, black)
D: DVI-U-CPU-MC2-UC
E: DVI-U-CON-MC4
M: RS-232 Loopback-Dongle
F: MultiPower-12
N: Monitor 1 (Dell 2408WFPb)
G: MultiPower-6
O: Monitor 2
(Eizo Flexscan S2410W)
H: PowerSet12 Typ3
P: Speaker (Logitech LS11)
SinPro SPU25A-105
Q: Power supply for speaker
J: Test-PC (Dell Optiplex 740)
(Logitech G100050A31)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 14 of 147
R: Keyboard USB (ateg InduKey)
AA: PowerSet12 Typ3
S: Mouse USB (ateg InduMouse)
SinPro SPU25A-105
T: Keyboard PS/2 (ateg InduKey)
AB: Load (resistor) ~ 600 mA
U: Mouse PS/2 (ateg InduMouse)
AC: Load (resistor) ~1.2 A
V: USB-PS2 converter
AD: Video analysis by
(G&D USB-CPU)
DL-Vision (M)-MC2-CPU
AE: Audio splitter
W: PowerSet12 Typ2
AF: Audio bridge (cable, 2 m)
SinPro SPU63-105
AG: TS-LED-2
X: Power-Status-Box
Y: Power-Status-Box
Z: PowerSet12 Typ3
SinPro SPU25A-105
Note:
EUTs were highlighted bold.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 15 of 147
DVICenter DP32
The MatrixSwitch (A) establishes the connections between the devices B, C, D
and E.
Criteria for correct function:
-
uninterrupted operation of the devices B, C, D and E
-
State LED "Main Power" and "Red. Power" glows green
-
Log shows no error
U2-R-CPU
The USB- target serves in combination with C (U2-R-CON) over A (DVICenter
DP32) the signal transmission of USB and RS232.
Criteria for correct function:
-
Uninterrupted data transmission of the test program on J over the RS232"Loopback"
-
Uninterrupted video playback from the USB- flash drive at C (U2-R-CON)
U2-R-CON
The console unit serves in combination with C (U2-R-CON) over A (DVICenter
DP32) the signal transmission of USB and RS232.
Criteria for correct function:
-
Uninterrupted data transmission of the test program on J over the RS232"loopback"
-
Uninterrupted video playback from the USB- flash drive at C (U2-R-CON)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 16 of 147
DVI-U-CPU-MC2-UC
The DVI-KVM-target serves in combination with E (DVI-U-CON-MC4) over A
(DVICenter DP32) the signal transmission of DVI, keyboard, mouse, USB and
audio. Optionally the system provides an alternative signal path over an additional DVICenter.
Criteria for correct function:
-
Uninterrupted DVI-signal transmission to the monitors at E
(DVI-U-CON-MC4)
-
The power- LED glows green
-
Keyboard and mouse at E (DVI-U-CON-MC4) usable
-
No critical status notifications of D in the log of DVICenter DP32.
-
Uninterrupted function of the USB- flashdrive L at E.
-
Uninterrupted transmission of the audio signal at E (line- In and line- out
bridged)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 17 of 147
DVI-U-CON-MC4
The DVI-KVM-target serves in combination with E (DVI-U-CON-MC4) over A
(DVICenter DP32) the signal transmission of DVI, keyboard, mouse, USB and
Audio. Optionally two separate DVI- connectors for up to 4 DVI- signal transmissions are available (in association with several targets). The DVI- port 4 were
chosen because of the fact that DVI- port 4 shows correct function if the internal
connections (1 to 2, 2 to 3, 3 to 4) and the data processing components works
correct. The DVI Channels 2, 3 and 4 are identically constructed.
Criteria for correct function:
-
Uninterrupted DVI- signal transmission to the Monitors at DVI- Port 1
and 4
-
The LEDs "Main power" and "Red. power" glows green
-
Keyboard and mouse are usable
-
No critical status notifications of E in the log of DVICenter DP32.
-
Uninterrupted function of the USB- flashdrive L.
-
Uninterrupted transmission of the audio signal at D (line- in and line- out
bridged)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 18 of 147
MultiPower-12
The device is the power supply for B (U2-R-CPU) and other devices.
In the temperature range up to 45 °C 12 nominal loads with up to 600 mA are
acceptable. In the temperature range up to 45 - 55 °C only 11 nominal Loads
with up to 600 mA are acceptable. The output 12 may be deactivated.
Criteria for correct function:
-
Uninterrupted power supply of B
-
Status LED "Main power" and "Red. power" glows green
-
The status LEDs at X glows green
-
The LEDs at the power ports glows green (12 up to 45 °C and 11 up to
55°C)
Due to the overload and overtemperature protection mechanism of the device
the upper ports are deactivated first. The device B is connected to port 11.
MultiPower-6
The device is the power supply for C (U2-R-CON) and other devices.
In the temperature range up to 45 °C 6 nominal loads with up to 1200 mA are
acceptable. In the temperature range up to 45 - 55 °C only 5 nominal loads with
up to 1200 mA are acceptable. The output 6 may be deactivated.
Criteria for correct function:
-
Uninterrupted power supply of C
-
Status LED "Main power" and "Red. power" glows green
-
The status LEDs at Y glows green
-
The LEDs at the power ports glows green (6 up to 45 °C and 5 up to
55°C)
Due to the overload and overtemperature protection mechanism of the device
the upper ports are deactivated at first. The device C is connected to port 5.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 19 of 147
PowerSet 12 Typ3 SinPro SPU25A-105
The device is the power supply for D (DVI-U-CPU-MC2-UC).
Criteria for correct function:
-
Uninterrupted power supply of D
-
State LED “Power” at D glows green
PowerSet 12 Typ2 SinPro SPU63-105
The device is the power supply for E (DVI-U-CON-MC4).
Criteria for correct function:
-
Uninterrupted power supply of E
-
State LED “Red. power” at E glows green
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 20 of 147
1.8 Monitoring of the EUT during the Test
The permanent correct function during the tests is monitored by several test programs. The programs creates log-files which allows the detection of malfunctions
or interruptions of normal operation.
Test programs are:
-
Audio SweepGen & external monitoring equipment
-
SerialMon
-
RS232 (FSer-test)
-
Flash Drive / Card Tester
-
Windows Media Player
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 21 of 147
Audio SweepGen & external Monitoring
The program generates a simple sine signal which is provided by the PC over
the line out. This signal is fed into DVI-U-CPU-MC2-UC and transmitted over
DVICenter DP32 to DVI-U-CON-MC4. At DVI-U-CON-MC4 the audio signal is
provided over a line- out connector. Over an external cable connection the signal is fed back to the DVI-U-CON-MC4 (over Line-in connector). After that the
signal is send back to the PC over the same path (DVI-U-CON-MC4 >> DVICenter DP32 >> DVI-U-CPU-MC2-UC). At the line out connector of the DVI-U-CPUMC2-UC device a PC measures the amplitude of the audio signal.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 22 of 147
SerialMon
The AD DL-Vision(M)-AR-MC2-CPU inspects the parameters of the DVI- Signals
for the State "stable Picture". In case of a change of picture resolution, refresh
rate or signal interruption an appropriate message is generated and saved. Only
one message is allowed after startup. During the test no critical messages
should be recorded.
Critical failures are:
-
failures of a power supply device
-
transmission errors over the Ethernet cables
-
interruptions of the communication between the devices A - E
Allowed messages are:
-
Frame repeated, ignore - messages (part of normal communication)
-
messages which shows the exceeding of temperature levels (During tests
with high temperatures)
The devices F, G, H and W were monitored indirectly because a defect of a
power supply results in a shutdown of the connected device which results in a
failure of one of the key features.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 23 of 147
FSerTest
The PC sends data over U2-R-CPU and DVICenter DP32 to U2-R-CON. By an
external adapter (loopback) the data is sent back to the PC over the same path
(U2-R-CON >> DVICenter DP32 >> U2-R-CPU).
The program on the PC compares the sent and the received data. After the
completion of the test the program creates a statistical analysis. In the statistic
no nonconforming or lost packages should be included.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 24 of 147
Flash Drive / Card Tester
The programm cyclically reads from the USB- Flashdrive at the DVI-U-CONMC4. Data connections through DVI-U-CPU-MC2-UC and DVICenter DP32 are
used for this purpose. During the test no interruptions should be identified.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 25 of 147
Windows Media Player
Test for the USB- Flashdrive at U2-R-CON over DVICenter DP32 and U2-RCPU. Playback of a Video in a endless-loop. The Video is stored on the Flashdrive. In case of an Failure the playback is stoped and a error message is
shown.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 26 of 147
2 Test performance and test results
2.1 Test performance
The tests are carried out as follows:
EUT
Test
Axis
Date of test
X, Y, Z
01.09.2014
15.09.2014
Vibration Dwell
X, Y, Z
01.09.2014
15.09.2014
Dry heat, storage
---
17.09.2014
–
18.09.2014
Dry heat, functional test
---
18.09.2014
–
19.09.2014
Cold, functional test
---
22.09.2014
–
23.09.2014
Damp heat, functional test
---
23.09.2014
–
24.09.2014
Excessive power supply
---
30.09.2014
Resonance search
5 Hz to 100 Hz
144305 – A
to
144305 - W
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 27 of 147
2.2 Test results
2.2.1 Resonance search
EUT
Test
Axis
1)
144305 - A
144305 – E
&
144305 – W
144305 – F
144305 – G
144305 – B
to
144305 – D
&
144305 – H
Note:
Requirements
fulfilled
Comments
2) 9)
3)
Resonance
search
5 Hz to 100 Hz
Z
4)
Diagrams, see paragraph 5
5) 6) 7) 8)
1)
144305 – A (DVICenter DP32)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 2)
Ethernet port:
magnitude ratio < 5 @ 100 Hz (see Diagram 3)
Mounting plate fan:
magnitude ratio < 5 @ 100 Hz (see Diagram 4)
PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 5)
2)
144305 – E (DVI-U-CON-MC4)
USB port PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 12)
PCB center:
magnitude ratio < 5 @ 100 Hz (see Diagram 13)
AC filter
:
magnitude ratio < 5 @ 100 Hz (see Diagram 14)
Housing center:
magnitude ratio < 5 @ 100 Hz (see Diagram 15)
3)
144305 – F (MultiPower 12)
Mounting plate fan:
Heat sink power supply:
Housing
:
PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 16)
magnitude ratio < 5 @ 100 Hz (see Diagram 17)
magnitude ratio < 5 @ 100 Hz (see Diagram 19)
magnitude ratio < 5 @ 100 Hz (see Diagram 18)
144305 – G (MultiPower 6)
Mounting plate fan:
PCB:
Housing:
magnitude ratio < 5 @ 95.982 Hz (see Diagram 20)
magnitude ratio > 5 @ 95.982 Hz (see Diagram 21)
magnitude ratio < 5 @ 95.982 Hz (see Diagram 22)
144305 – B (U2-R-CPU)
PCB:
Housing:
no resonances (see Diagram 6)
no resonances (see Diagram 7)
4)
5)
6)
144305 – D (DVI-U-CPU-MC2-UC)
PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 10)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 28 of 147
Housing
7)
:
magnitude ratio < 5 @ 100 Hz (see Diagram 11)
144305 – C (U2-R-CON)
PCB:
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 8)
magnitude ratio < 5 @ 100 Hz (see Diagram 9)
8)
144305 – W (PowerSet12 Typ 2)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 73)
9)
144305 – H (PowerSet12 Typ 3)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 70)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 29 of 147
EUT
Test
144305 – B
to
144305 – D
&
144305 – H
144305 – G
144305 – F
Axis
5) 6) 7) 9)
Resonance
search
5 Hz to 100 Hz
4)
Y
144305 – E
&
144305 – W
3)
Diagrams, see paragraph 5
2) 8)
1)
144305 – A
Note:
Requirements
fulfilled
Comments
1)
144305 – A (DVICenter DP32)
Capacitor:
no resonances (see Diagram 46)
Ethernet port:
no resonances (see Diagram 48)
Mounting plate fan:
no resonances (see Diagram 47)
Housing:
no resonances (see Diagram 49)
2)
144305 – E (DVI-U-CON-MC4)
Ethernet port:
no resonances (see Diagram 56)
Heat sink voltage regulator: no resonances (see Diagram 58)
AC filter:
no resonances (see Diagram 57)
Housing:
no resonances (see Diagram 59)
3)
144305 – F (MultiPower 12)
Capacitor power module:
Capacitor main PCB:
Housing:
no resonances (see Diagram 60)
no resonances (see Diagram 62)
no resonances (see Diagram 61)
144305 – G (MultiPower 6)
AC filter:
Mounting plate fan:
Power connector PCB:
Housing:
Heat sink:
magnitude ratio < 5 @ 100 Hz (see Diagram 64)
magnitude ratio < 5 @ 100 Hz (see Diagram 65)
no resonances (see Diagram 63)
no resonances (see Diagram 66)
magnitude ratio < 5 @ 69.53 Hz (see Diagram 67)
4)
5)
6)
144305 – B (U2-R-CPU)
USB Port / PCB:
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 50)
magnitude ratio < 5 @ 100 Hz (see Diagram 51)
144305 – D (DVI-U-CPU-MC2-UC)
Ethernet Port / PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 54)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 55)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 30 of 147
7)
144305 – C (U2-R-CON)
USB Port / PCB:
Housing:
magnitude ratio < 5 @ 74.59 Hz (see Diagram 53)
magnitude ratio < 5 @ 100 Hz (see Diagram 52)
8)
144305 – W (PowerSet12 Typ 2)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 72)
9)
144305 – H (PowerSet12 Typ 3)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 69)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 31 of 147
EUT
Test
144305 – B
to
144305 – D
&
144305 – H
144305 – A
144305 – E
&
144305 – W
Axis
Comments
5) 6) 7) 9)
Resonance
search
5 Hz to 100 Hz
4)
X
Diagrams, see paragraph 5
3) 8)
144305 – F
2)
144305 – G
1)
Note:
1)
Requirements
fulfilled
144305 – A (DVICenter DP32)
LED socket rear:
no resonances (see Diagram 23)
Battery socket:
no resonances (see Diagram 24)
AC Filter:
no resonances (see Diagram 25)
Ethernet Port:
magnitude ratio < 5 @ 100 Hz (see Diagram 27)
Housing:
no resonances (see Diagram 26)
2)
144305 – E (DVI-U-CON-MC4)
Capacitor power module:
magnitude ratio < 5 @ 100 Hz (see Diagram 35)
Heat sink voltage regulator: magnitude ratio < 5 @ 100 Hz (see Diagram 37)
USB Port main PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 34)
Housing:
no resonances (see Diagram 36)
3)
4)
5)
6)
144305 – F (MultiPower 12)
Coil power module:
Heat sink power supply:
Housing:
Capacitor PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 38)
magnitude ratio < 5 @ 100 Hz (see Diagram 39)
magnitude ratio < 5 @ 68.32 Hz (see Diagram 40)
magnitude ratio < 5 @ 100 Hz (see Diagram 41)
144305 – G (MultiPower 6)
Heat sink power module:
Capacitor main PCB:
PCB power connector:
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 44)
magnitude ratio < 5 @ 91.0488 Hz (see Diagram 45)
magnitude ratio < 5 @ 67.1241 Hz (see Diagram 43)
magnitude ratio < 5 @ 100 Hz (see Diagram 42)
144305 – B (U2-R-CPU)
USB Port PCB:
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 29)
magnitude ratio < 5 @ 100 Hz (see Diagram 28)
144305 – D (DVI-U-CPU-MC2-UC)
PCB:
magnitude ratio < 5 @ 100 Hz (see Diagram 33)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 32)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 32 of 147
7)
144305 – C (U2-R-CON)
Ethernet Port PCB:
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 31)
magnitude ratio < 5 @ 100 Hz (see Diagram 30)
8)
144305 – W (PowerSet12 Typ 2)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 71)
9)
144305 – H (PowerSet12 Typ 3)
Housing:
magnitude ratio < 5 @ 100 Hz (see Diagram 68)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 33 of 147
2.2.2 Vibration, sinusoidal
Requirements: - Before and after the durability test a performance check will be
carried out under normal test conditions
- Optical test for mechanical stability
- Performance check during the durability test
EUT
Test
Vibration Dwell
30 Hz for 2 h
144305 – A
Vibration Dwell
30 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
144305 – B
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
30 Hz for 2 h
Note:
Axis
Performance
check
Visual
damages
Requirements
fulfilled
X
OK
None
YES
Y
OK
None
YES
Z
OK
None
YES
X
OK
None
YES
Y
OK
None
YES
Z
OK
None
YES
During the performance check several status messages were reported by the DL- Vision
MC2-CPU. Malfunctions of the complete system or parts were not detected.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 34 of 147
EUT
Test
Vibration Dwell
100 Hz for 2 h
Axis
Performance
check
Visual
damages
Requirements
fulfilled
X
OK
None
YES
OK
None
YES
OK
None
YES
Z
OK
None
YES
X
OK
None
YES
Y
OK
None
YES
Z
OK
None
YES
OK
None
YES
OK
None
YES
Y
OK
None
YES
Z
OK
None
YES
Vibration Dwell
144305 – C
100 Hz for 2 h
Y
Vibration Dwell
74.5947 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
144305 – D
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
X
Vibration Dwell
144305 – E
30 Hz for 2 h
Vibration Dwell
30 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
Note:
During the performance check several status messages were reported by the DL- Vision
MC2-CPU. Malfunctions of the complete system or parts were not detected.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 35 of 147
EUT
Test
Performance
check
Visual
damages
Requirements
fulfilled
OK
None
YES
OK
None
YES
Y
OK
None
YES
Z
OK
None
YES
OK
None
YES
OK
None
YES
OK
None
YES
OK
None
YES
OK
None
YES
Z
OK
None
YES
X
OK
None
YES
Y
OK
None
YES
Z
OK
None
YES
X
OK
None
YES
Y
OK
None
YES
Z
OK
None
YES
Axis
Vibration Dwell
100 Hz for 2 h
X
Vibration Dwell
144305 – F
68.3151 Hz for 2 h
Vibration Dwell
30 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
91.0481 Hz for 2 h
X
Vibration Dwell
67.1241 Hz for 2 h
Vibration Dwell
144305 – G
30 Hz for 2 h
Vibration Dwell
Y
100 Hz for 2 h
Vibration Dwell
69.5273 Hz for 2 h
Vibration Dwell
95.9818 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
144305 – H
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
144305 –
W
Vibration Dwell
100 Hz for 2 h
Vibration Dwell
100 Hz for 2 h
Note:
During the performance check several status messages were reported by the DL- Vision
MC2-CPU. Malfunctions of the complete system or parts were not detected.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 36 of 147
2.2.3 Dry heat, storage test
Requirements: - Before and after the durability test a performance check will be
carried out under normal test conditions
- Optical test for mechanical stability
EUT
Temp.
Test
duration
Visual
damages
Performance
check
Requirements
fulfilled
+ 70 °C
16 h
None
OK
YES
144305 – A
to
144305 – H
And
144305 - W
Note:
During the performance check several status messages were reported by the DL- VisionMC2-CPU. Malfunctions of the complete system or parts were not detected.
2.2.4 Dry heat, Functional test
Requirements: - Before and after the durability test a performance check will be
carried out under normal test conditions
- Optical test for mechanical stability
- Performance test and check during the test
EUT
Temp.
Test
duration
Visual
damages
Performance
test & check
Requirements
fulfilled
+ 55 °C
16 h
None
OK
YES
144305 – A
to
144305 – H
And
144305 - W
Note:
During the performance test and check several status messages were reported by the DLVision-MC2-CPU. Malfunctions of the complete system or parts were not detected.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 37 of 147
2.2.5 Cold, Low temperature Functional test
Requirements: - Before and after the durability test a performance check will be
carried out under normal test conditions
- Optical test for mechanical stability
- Performance test and check during the test
EUT
Temp.
Test
duration
Visual
damages
Performance
test & check
Requirements
fulfilled
- 15 °C
16 h
None
OK
YES
144305 – A
to
144305 – H
And
144305 - W
Note:
During the performance test and check several status messages were reported by the DLVision-MC2-CPU. Malfunctions of the complete system or parts were not detected.
2.2.6 Damp heat, Functional test
Requirements: - Before and after the durability test a performance check will be
carried out under normal test conditions
- Optical test for mechanical stability
- Performance check during the test
EUT
Temp./
Humidity
Test
duration
Visual
damages
Performance
check
Requirements
fulfilled
16 h
None
OK
Yes
144305 – A
to
144305 – H
And
+ 40 °C /
93 %
144305 - W
Note:
During the performance check several status messages were reported by the DL- VisionMC2-CPU. Malfunctions of the complete system or parts were not detected.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 38 of 147
2.2.7 Excessive power supply
Requirements: - Before and after the durability test a performance check will be
carried out under normal test conditions
- Optical test for mechanical stability
EUT
Temp./
Humidity
Test
duration
+ 40 °C /
5
93 %
minutes
Visual
damages
Performance
check
Requirements
fulfilled
None
OK
Yes
144305 – A
to
144305 – H
And
144305 - W
Note:
During the performance check several status messages were reported by the DL- VisionMC2-CPU. Malfunctions of the complete system or parts were not detected.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 39 of 147
3 List of measurement equipment
Note:
Measurement equipment
PM Nr.
Shaker LDS V875-640 LPT 600
490022
Accelerometer 1.0496 mV/(m/s)²
481395
Accelerometer 1.054 mV/(m/s)²
480603
Accelerometer 5.048 mV/(m/s)²
481661
Accelerometer 1.026 mV/(m/s)²
481837
Accelerometer 0.9460 mV/(m/s)²
481833
Accelerometer 0.8658 mV/(m/s)²
481480
Accelerometer 1.1661 mV/(m/s)²
481483
Accelerometer 0.9807 mV/(m/s)²
481506
Temperature Cabinet VCS 7150-5
481264
Monitoring Equipment
Customer Equipment
AC Power supply type HP6813B
480788
Monitoring equipment
MW 10
The QM-Manual of PHOENIX TESTLAB regulates the calibration of the measuring
equipment. All listed measuring equipment is traceable calibrated according to national
or international standards. Measurement uncertainty is calculated according to GUM.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 40 of 147
4 Pictures
Picture 2: Z- Axis, EUT 144305 – A, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 41 of 147
Picture 3: Z- Axis EUT 144305 – A, position of accelerometers
Accelerometers for resonance measurement
- Center PCB
- Mounting plate fan
- Ethernet Port front
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 42 of 147
Picture 4: Z- Axis EUT 144305 – A, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 43 of 147
Picture 5: Z- Axis, EUT 144305 – B; C & D, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 44 of 147
Picture 6: Z- Axis EUT 144305 – B, position of accelerometers
Accelerometers for
Resonance Measurement:
-
PCB Controller
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 45 of 147
Picture 7: Z- Axis EUT 144305 – B, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 46 of 147
Picture 8: Z- Axis EUT 144305 – C, position of accelerometers
Accelerometers for
Resonance Measurement:
-
PCB Controller
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 47 of 147
Picture 9: Z- Axis EUT 144305 – C, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 48 of 147
Picture 10: Z- Axis EUT 144305 – D, position of accelerometers
Accelerometers for
Resonance Measurement:
-
PCB
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 49 of 147
Picture 11: Z- Axis EUT 144305 – D, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 50 of 147
Picture 12: Z- Axis, EUT 144305 – E, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 51 of 147
Picture 13: Z- Axis EUT 144305 – E, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
2 Port USB on PCB
PCB Center
AC filter
Version
Page 52 of 147
Picture 14: Z- Axis EUT 144305– E, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 53 of 147
Picture 15: Z- Axis, EUT 144305 –F, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 54 of 147
Picture 16: Z- Axis EUT 144305 – F, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
PCB Center
Mounting plate fan
Heat sink power supply
Version
Page 55 of 147
Picture 17: Z- Axis EUT 144305 – F, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 56 of 147
Picture 18: Z- Axis, EUT 144305 – G, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 57 of 147
Picture 19: Z- Axis EUT 144305 – G, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Mounting plate fan
PCB Center
AC filter
Version
Page 58 of 147
Picture 20: Z- Axis EUT 144305 – G, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 59 of 147
Picture 21: X- Axis, EUT 144305 – A, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 60 of 147
Picture 22: X- Axis EUT 144305 – A, position of accelerometers
Accelerometers for
Resonance Measurement:
-
AC Filter
Battery holder
LED holder
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 61 of 147
Picture 23: X- Axis EUT 144305 – A, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 62 of 147
Picture 24: X- Axis, EUT 144305 – B; C & D, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 63 of 147
Picture 25: X- Axis EUT 144305 – B, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Ethernet Port
Version
Page 64 of 147
Picture 26: X- Axis EUT 144305 – C, position of accelerometers, USB- Port
Accelerometers for
Resonance Measurement:
-
USB- Port
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 65 of 147
Picture 27: X- Axis EUT 144305 – C, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 66 of 147
Picture 28: X- Axis EUT 144305 – D, position of accelerometers
Accelerometers for
Resonance Measurement:
-
PCB
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 67 of 147
Picture 29: X- Axis, EUT 144305 – E, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 68 of 147
Picture 30: X- Axis EUT 144305 – E, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
USB- Port
Capacitor power module
Heat sink voltage regulator
Version
Page 69 of 147
Picture 31: X- Axis EUT 144305 – E, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 70 of 147
Picture 32: X- Axis, EUT 144305 – F, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 71 of 147
Picture 33: X- Axis EUT 144305 – F, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Coil power module
Heat sink power module
Capacitor main PCB
Version
Page 72 of 147
Picture 34: X- Axis EUT 144305 – F, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 73 of 147
Picture 35: X- Axis, EUT 144305 – G, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 74 of 147
Picture 36: X- Axis EUT 144305 – G, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Heat sink power module
Capacitor main PCB
Connector power module
Version
Page 75 of 147
Picture 37: X- Axis EUT 144305 – G, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 76 of 147
Picture 38: Y- Axis, EUT 144305 – A, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 77 of 147
Picture 39: Y- Axis EUT 144305 – A, position of accelerometers
Accelerometers for
Resonance Measurement:
-
USB port
Ethernet Port
Mounting plate fan
Capacitor power module
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 78 of 147
Picture 40: Y- Axis EUT 144305 – A, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 79 of 147
Picture 41: Y- Axis, EUT 144305 – B; C & D, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 80 of 147
Picture 42: Y- Axis EUT 144305 – B, position of accelerometers
Accelerometers for
Resonance Measurement:
-
USB- Port
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 81 of 147
Picture 43: Y- Axis EUT 144305 – B, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 82 of 147
Picture 44: Y- Axis EUT 144305 – C, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
USB Port
Version
Page 83 of 147
Picture 45: Y- Axis EUT 144305 – D, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Ethernet Port
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 84 of 147
Picture 46: Y- Axis EUT 144305 – D, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 85 of 147
Picture 47: Y- Axis, EUT 144305 – E, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 86 of 147
Picture 48: Y- Axis EUT 144305 – E, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
AC Filter
Coil power module
Ethernet port main PCB
Version
Page 87 of 147
Picture 49: Y- Axis EUT 144305 – E, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 88 of 147
Picture 50: Y- Axis, EUT 144305 – F, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 89 of 147
Picture 51: Y- Axis EUT 144305 – F, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Capacitor power module
Capacitor main PCB
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 90 of 147
Picture 52: Y- Axis EUT 144305 – F, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 91 of 147
Picture 53: Y- Axis, EUT 144305 – G, Test set-up resonance search
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 92 of 147
Picture 54: Y- Axis EUT 144305 – G, position of accelerometers
Accelerometers for
Resonance Measurement:
-
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
AC Filter
Heat sink power module
Connector Power port
Version
Page 93 of 147
Picture 55: Y- Axis EUT 144305 – G, position of accelerometer at housing
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 94 of 147
Picture 56: EUTs in climatic cabinet
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 95 of 147
Picture 57: Monitoring during climatic tests
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 96 of 147
Picture 57: By the monitoring marked massages
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 97 of 147
Diagrams
Diagram 1: Vibration, Resonance search profile (exemplary)
DUT: 144305 Gunthermann & Drunk
Serial Number: Z-Achse Resosuche DVICenter DP32
Project File Name: Resosuche.prj
Profile Name: Low Level
Test Type: Swept Sine
Run Folder: .\RunDefault Sep 01, 2014 16-21-17
m/s²
50.0000
profile(f)
high-abort(f)
low-abort(f)
high-alarm(f)
10.0000
low-alarm(f)
control(f)
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Level:
Frequency:
100 %
5.001248 Hz
Full Level Time:
Time Remaining:
00:17:18
00:00:00
Data saved at 04:49:31 PM, Monday, September 01, 2014
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Sweep Type:
Sweep Rate:
Logarithmic
0.5 Oct/Min
Report created at 04:49:32 PM, Monday, September 1, 2014
Version
Page 98 of 147
Diagram 2: Resonance search Z- Axis, EUT 144305 – A Housing
m/s²
50.0000
profile(f)
RM 4 Housing center(f): 100.0026 Hz, 24.0429 m/s²
RM 4 Housing center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 3: Resonance search Z- Axis, EUT 144305 – A Ethernetport
m/s²
50.0000
RM 3 Ethernetport(f): 99.8637 Hz, 17.6187 m/s²
profile(f)
RM 3 Ethernetport(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 99 of 147
Diagram 4: Resonance search Z- Axis, EUT 144305 – A, Mounting plate fan
m/s²
50.0000
RM 2 Fan inside(f): 100.0026 Hz, 27.6713 m/s²
profile(f)
RM 2 Fan inside(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 5: Resonance search Z- Axis, EUT 144305 – A, PCB
m/s²
50.0000
RM 1 PCB center(f): 100.0026 Hz, 25.8914 m/s²
profile(f)
RM 1 PCB center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 100 of 147
Diagram 6: Resonance search Z- Axis, EUT 144305 – B, PCB
m/s²
50.0000
RM 1 PCB controler right U2-R-CPU(f): 100.0026 Hz, 6.9077 m/s²
profile(f)
RM 1 PCB controler right U2-R-CPU(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 7: Resonance search Z- Axis, EUT 144305 – B, Housing
m/s²
50.0000
RM 4 Housing center U2-R-CPU(f): 100.0026 Hz, 7.2859 m/s²
profile(f)
RM 4 Housing center U2-R-CPU(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 101 of 147
Diagram 8: Resonance search Z- Axis, EUT 144305 – C, PCB
m/s²
50.0000
RM 3 PCB controler left U2-R-CON(f): 100.0026 Hz, 7.9365 m/s²
profile(f)
RM 3 PCB controler left U2-R-CON(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 9: Resonance search Z- Axis, EUT 144305 – C, Housing
m/s²
50.0000
profile(f)
profile(f): 100.0026 Hz, 7.0000 m/s²
RM 4 Housing center U2-R-CON(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 102 of 147
Diagram 10: Resonance search Z- Axis, EUT 144305 – D, PCB
m/s²
50.0000
RM 2 PCB DVI-U-CPU-MC2-UC(f): 100.0026 Hz, 7.4849 m/s²
profile(f)
RM 2 PCB DVI-U-CPU-MC2-UC(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 11: Resonance search Z- Axis, EUT 144305 – D, Housing
m/s²
50.0000
RM 4 Housing center DVI-U-CPU-MC2-UC(f): 100.0026 Hz, 7.6020 m/s²
profile(f)
RM 4 Housing center DVI-U-CPU-MC2-UC
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 103 of 147
Diagram 12: Resonance search Z- Axis, EUT 144305 – E, USB- Port PCB
m/s²
50.0000
RM 3 USB PCB rear(f): 100.0026 Hz, 8.3063 m/s²
profile(f)
RM 3 USB PCB rear(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 13: Resonance search Z- Axis, EUT 144305 – E, PCB
m/s²
50.0000
RM 1 PCB center(f): 100.0026 Hz, 16.8534 m/s²
profile(f)
RM 1 PCB center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 104 of 147
Diagram 14: Resonance search Z- Axis, EUT 144305 – E, AC filter
m/s²
50.0000
RM 2 AC Filter(f): 100.0026 Hz, 9.6235 m/s²
profile(f)
RM 2 AC Filter(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 15: Resonance search Z- Axis, EUT 144305 – E, Housing
m/s²
50.0000
RM 4 Housing center(f): 100.0026 Hz, 16.9415 m/s²
profile(f)
RM 4 Housing center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 105 of 147
Diagram 16: Resonance search Z- Axis, EUT 144305 – F, mounting plate fan
m/s²
50.0000
RM 2 Fan(f): 100.0026 Hz, 14.5738 m/s²
profile(f)
RM 2 Fan(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 17: Resonance search Z- Axis, EUT 144305 – F, heat sink power supply
m/s²
50.0000
RM 3 heat sink power supply(f): 100.0026 Hz, 18.0545 m/s²
profile(f)
RM 3 heat sink power supply(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 106 of 147
Diagram 18: Resonance search Z- Axis, EUT 144305 – F, PCB center
m/s²
50.0000
RM 1 PCB center(f): 100.0026 Hz, 20.1209 m/s²
profile(f)
RM 1 PCB center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 19: Resonance search Z- Axis, EUT 144305 – F, Housing center
m/s²
50.0000
RM 4 Housing center(f): 100.0026 Hz, 12.8929 m/s²
profile(f)
RM 4 Housing center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 107 of 147
Diagram 20: Resonance search Z- Axis, EUT 144305 – G, Mounting plate fan
m/s²
50.0000
RM 2 Fan rear side(f): 95.9818 Hz, 18.7211 m/s²
profile(f)
RM 2 Fan rear side(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 21: Resonance search Z- Axis, EUT 144305 – G, PCB center
m/s²
50.0000
RM 1 PCB center(f): 95.9818 Hz, 36.5325 m/s²
profile(f)
RM 1 PCB center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 108 of 147
Diagram 22: Resonance search Z- Axis, EUT 144305 – G, Housing center
m/s²
50.0000
RM 4 Housing center(f): 95.9818 Hz, 25.2358 m/s²
profile(f)
RM 4 Housing center(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 109 of 147
Diagram 23: Resonance search X- Axis, EUT 144305 – A, LED socket
m/s²
50.0000
profile(f)
RM 1 LED socket(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 24: Resonance search X- Axis, EUT 144305 – A, Battery socket
m/s²
12.5893
profile(f)
10.0000
RM 3 Batterie(f)
1.0000
0.7943
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 110 of 147
Diagram 25: Resonance search X- Axis, EUT 144305 – A, AC- Filter
m/s²
50.0000
profile(f)
RM 2 Netfilter(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 26: Resonance search X- Axis, EUT 144305 – A, Housing DVI
m/s²
50.0000
profile(f)
RM 4 housing DVI Center DP 32(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 111 of 147
Diagram 27: Resonance search X- Axis, EUT 144305 – A, Ethernet port
m/s²
50.0000
RM 5 heat sink (black)(f): 100.0026 Hz, 7.5902 m/s²
profile(f)
Ethernet
RM 5 heat
sink port
(black)(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 112 of 147
Diagram 28: Resonance search X- Axis, EUT 144305 – B, Housing center
m/s²
50.0000
RM 4 Housing center U2-R-CPU(f): 100.0026 Hz, 7.7353 m/s²
profile(f)
RM 4 Housing center U2-R-CPU(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 29: Resonance search X- Axis, EUT 144305 – B, PCB USB
m/s²
50.0000
RM 1 PCB USB U2-R-CPU(f): 100.0026 Hz, 7.6189 m/s²
profile(f)
RM 1 PCB USB U2-R-CPU(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 113 of 147
Diagram 30: Resonance search X- Axis, EUT 144305 – C, Housing center
m/s²
50.0000
RM 4 Housing center U2-R-CON(f): 100.0026 Hz, 8.5552 m/s²
profile(f)
RM 4 Housing center U2-R-CON(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 31: Resonance search X- Axis, EUT 144305 – C, PCB Ethernet port
m/s²
12.5893
profile(f)
10.0000
RM 3 PCB Ethernet left U2-R-CON(f)
1.0000
0.7499
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 114 of 147
Diagram 32: Resonance search X- Axis, EUT 144305 – D, Housing center
m/s²
50.0000
RM 5
Housing DVI U CPU MC2 UC(f): 100.0026 Hz, 8.1735 m/s²
profile(f)
RM 5 Housing DVI U CPU MC2 UC(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 33: Resonance search X- Axis, EUT 144305 – D, PCB
m/s²
50.0000
RM 2 PCB DVI-U-CPU-MC2-UC(f): 100.0026 Hz, 8.0683 m/s²
profile(f)
RM 2 PCB DVI-U-CPU-MC2-UC(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 115 of 147
Diagram 34: Resonance search X- Axis, EUT 144305 – E, USB port
m/s²
50.0000
RM 1 USB port front(f): 100.0026 Hz, 7.4228 m/s²
profile(f)
RM 1 USB port front(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 35: Resonance search X- Axis, EUT 144305 – E, Capacitor
m/s²
50.0000
RM 2 Capacitor(f): 100.0026 Hz, 7.9799 m/s²
profile(f)
RM 2 Capacitor(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 116 of 147
Diagram 36: Resonance search X- Axis, EUT 144305 – E, Housing center
m/s²
50.0000
profile(f)
RM 4 housing DVI-U-CON-MC4(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 37: Resonance search X- Axis, EUT 144305 – E, heat sink
m/s²
50.0000
RM 5 heat sink (black)(f): 100.0026 Hz, 7.5902 m/s²
profile(f)
RM 5 heat sink (black)(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 117 of 147
Diagram 38: Resonance search X- Axis, EUT 144305 – F, Coil
m/s²
50.0000
RM 5 coil(f): 100.0026 Hz, 10.5346 m/s²
profile(f)
RM 5 coil(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 39: Resonance search X- Axis, EUT 144305 – F, heat sink power module
m/s²
50.0000
RM 1 heat sink power module(f): 100.0026 Hz, 14.1036 m/s²
profile(f)
RM 1 heat sink power module(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 118 of 147
Diagram 40: Resonance search X- Axis, EUT 144305 – F, Housing center
m/s²
50.0000
profile(f)
RM 4 housing Multipower 12(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 41: Resonance search X- Axis, EUT 144305 – F, Capacitor main PCB
m/s²
50.0000
RM 2 Capacitor main PCB(f): 68.3151 Hz, 8.5008 m/s²
profile(f)
RM 2 Capacitor main PCB(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 119 of 147
Diagram 42: Resonance search X- Axis, EUT 144305 – G, housing center
m/s²
50.0000
RM 4 housing Multipower 6(f): 100.0026 Hz, 7.8351 m/s²
profile(f)
RM 4 housing Multipower 6(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 43: Resonance search X- Axis, EUT 144305 – G, PCB Power connector
m/s²
50.0000
RM 5 PCB power connector 4(f): 67.1241 Hz, 8.5553 m/s²
profile(f)
RM 5 PCB power connector 4(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 120 of 147
Diagram 44: Resonance search X- Axis, EUT 144305 – G, heat sink power module
m/s²
50.0000
RM 1 heat sink power module(f): 100.0026 Hz, 14.1933 m/s²
profile(f)
RM 1 heat sink power module(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 45: Resonance search X- Axis, EUT 144305 – G, Capacitor main PCB
m/s²
50.0000
RM 2 Capacitor main PCB(f): 91.0488 Hz, 7.5002 m/s²
profile(f)
RM 2 Capacitor main PCB(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 121 of 147
Diagram 46: Resonance search Y- Axis, EUT 144305 – A, Capacitor
m/s²
50.0000
profile(f)
RM 1 Capacitor(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 47: Resonance search Y- Axis, EUT 144305 – A, fan
m/s²
10.0000
profile(f)
RM 3 fan(f)
1.0000
0.7943
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 122 of 147
Diagram 48: Resonance search Y- Axis, EUT 144305 – A, Ethernet port
m/s²
50.0000
profile(f)
RM 2 ETH port front(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 49: Resonance search Y- Axis, EUT 144305 – A, Housing center
m/s²
50.0000
profile(f)
RM 4 housing DVI Center DP 32(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 123 of 147
Diagram 50: Resonance search Y- Axis, EUT 144305 – B, USB port
m/s²
50.0000
RM 1
USB port U2-R-CPU(f): 100.0026 Hz, 7.8761 m/s²
profile(f)
RM 1 USB port U2-R-CPU(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 51: Resonance search Y- Axis, EUT 144305 – B, housing center
m/s²
50.0000
RM 4 Housing U2-R-CPU(f): 100.0026 Hz, 8.0860 m/s²
profile(f)
RM 4 Housing U2-R-CPU(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 124 of 147
Diagram 52: Resonance search Y- Axis, EUT 144305 – C, Housing center
m/s²
50.0000
RM 4 Housing U2-R-CON(f): 100.0026 Hz, 7.9998 m/s²
profile(f)
RM 4 Housing U2-R-CON(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 53: Resonance search Y- Axis, EUT 144305 – C, USB port
m/s²
12.5893
10.0000
RM 3 USB port U2-R-CON(f): 74.5947 Hz, 7.7910 m/s²
profile(f)
RM 3 USB port U2-R-CON(f)
1.0000
0.7762
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 125 of 147
Diagram 54: Resonance search Y- Axis, EUT 144305 – D, Ethernet port
m/s²
50.0000
RM 2
ETH port DVI-U-CPU-MC2-UC(f): 100.0026 Hz, 7.8697 m/s²
profile(f)
RM 2 ETH port DVI-U-CPU-MC2-UC(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 55: Resonance search Y- Axis, EUT 144305 – D, Housing center
m/s²
50.0000
RM 5
Housing DVI U CPU MC2 UC(f): 100.0026 Hz, 8.0530 m/s²
profile(f)
RM 5 Housing DVI U CPU MC2 UC(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 126 of 147
Diagram 56: Resonance search Y- Axis, EUT 144305 – E, Ethernet port
m/s²
50.0000
profile(f)
RM 1 ETH port(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 57: Resonance search Y- Axis, EUT 144305 – E, AC- filter
m/s²
10.0000
profile(f)
RM 3 Netfilter(f)
1.0000
0.7943
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 127 of 147
Diagram 58: Resonance search Y- Axis, EUT 144305 – E, heat sink power module
m/s²
50.0000
profile(f)
RM 2 heat sink power unit(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 59: Resonance search Y- Axis, EUT 144305 – E, housing center
m/s²
50.0000
profile(f)
RM 4 housing DVI - U - CON - MC4(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 128 of 147
Diagram 60: Resonance search Y- Axis, EUT 144305 – F, capacitor main PCB
m/s²
50.0000
profile(f)
RM 1 capacitor PCB(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 61: Resonance search Y- Axis, EUT 144305 – F, Housing center
m/s²
50.0000
profile(f)
RM 4 housing(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 129 of 147
Diagram 62: Resonance search Y- Axis, EUT 144305 – F, capacitor power module
m/s²
50.0000
profile(f)
RM 2 capacitor power supply(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 130 of 147
Diagram 63: Resonance search Y- Axis, EUT 144305 – G, Power out
m/s²
50.0000
RM 4 power out 5(f): 100.0026 Hz, 7.5654 m/s²
profile(f)
RM 4 power out 5(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 64: Resonance search Y- Axis, EUT 144305 – G, AC- filter
m/s²
12.5893
10.0000
RM 3 netfilter(f): 100.0026 Hz, 7.5431 m/s²
profile(f)
RM 3 netfilter(f)
1.0000
0.7943
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 131 of 147
Diagram 65: Resonance search Y- Axis, EUT 144305 – G, fan
m/s²
50.0000
RM 2 fan(f): 100.0026 Hz, 8.2752 m/s²
profile(f)
RM 2 fan(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 66: Resonance search Y- Axis, EUT 144305 – G, housing center
m/s²
50.0000
RM 5 housing Multipower 6(f): 100.0026 Hz, 7.4007 m/s²
profile(f)
RM 5 housing Multipower 6(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 132 of 147
Diagram 67: Resonance search Y- Axis, EUT 144305 – G, heat sink
m/s²
50.0000
RM 1 heat sink left(f): 69.5273 Hz, 7.4874 m/s²
profile(f)
RM 1 heat sink left(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 133 of 147
Diagram 68: Resonance search X- Axis, EUT 144305 – H, Housing
m/s²
50.0000
RM1 Housing(f): 99.3809 Hz, 9.6064 m/s²
profile(f)
RM1 Housing(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 69: Resonance search Y- Axis, EUT 144305 – H, Housing
m/s²
50.0000
RM1 Housing(f): 99.2737 Hz, 7.4102 m/s²
profile(f)
RM1 Housing(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 134 of 147
Diagram 70: Resonance search Z- Axis, EUT 144305 – H, Housing
m/s²
50.0000
RM1 Housing(f): 99.3809 Hz, 7.5065 m/s²
profile(f)
RM1 Housing(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Note:
During the Resonance search and the Dwell Test the power supplies H & W were fastened by
cable retainer at the swing table. This was done because the fitting condition during normal use
could not be warranted.
The resonances at 45 Hz are a result of the control system of the shaker.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 135 of 147
Diagram 71: Resonance search X- Axis, EUT 144305 – W, Housing
m/s²
50.0000
profile(f)
RM1 Housing.(f): 99.4104 Hz, 9.9760 m/s²
RM1 Housing.(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Diagram 72: Resonance search Y- Axis, EUT 144305 – W, Housing
m/s²
50.0000
profile(f)
RM1 Housing.(f): 99.3082 Hz, 8.6237 m/s²
RM1 Housing.(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 136 of 147
Diagram 73: Resonance search Z- Axis, EUT 144305 – W, Housing
m/s²
50.0000
RM1 Housing(f): 99.3809 Hz, 8.0205 m/s²
profile(f)
RM1 Housing(f)
10.0000
1.0000
0.5000
5.00
10.00
100.00
Frequency (Hz)
Note:
During the Resonance search and the Dwell Test the power supplies H & W were fastened by
cable retainer at the swing table. This was done because the fitting condition during normal use
could not be warranted.
The resonances at 45 Hz are a result of the control system of the shaker.
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 137 of 147
Diagram 74: Temperature profile, Dry heat storage
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 138 of 147
Diagram 75: Temperature profile, Dry heat function
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 139 of 147
Diagram 76: Temperature profile, Low temperature function
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 140 of 147
Diagram 77: Climatic profile, Humidity, function
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 141 of 147
Diagram 78: Monitoring Audio Signal, Humidity, function (exemplary)
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 142 of 147
5 List of pictures
Picture 1: Schematic test setup ..................................................................................... 14
Picture 2: Z- Axis, EUT 144305 – A, Test set-up resonance search ............................. 41
Picture 3: Z- Axis EUT 144305 – A, position of accelerometers.................................... 42
Picture 4: Z- Axis EUT 144305 – A, position of accelerometer at housing .................... 43
Picture 5: Z- Axis, EUT 144305 – B; C & D, Test set-up resonance search.................. 44
Picture 6: Z- Axis EUT 144305 – B, position of accelerometers.................................... 45
Picture 7: Z- Axis EUT 144305 – B, position of accelerometer at housing .................... 46
Picture 8: Z- Axis EUT 144305 – C, position of accelerometers ................................... 47
Picture 9: Z- Axis EUT 144305 – C, position of accelerometer at housing....................48
Picture 10: Z- Axis EUT 144305 – D, position of accelerometers ................................. 49
Picture 11: Z- Axis EUT 144305 – D, position of accelerometer at housing..................50
Picture 12: Z- Axis, EUT 144305 – E, Test set-up resonance search ........................... 51
Picture 13: Z- Axis EUT 144305 – E, position of accelerometers.................................. 52
Picture 14: Z- Axis EUT 144305– E, position of accelerometer at housing ................... 53
Picture 15: Z- Axis, EUT 144305 –F, Test set-up resonance search ............................ 54
Picture 16: Z- Axis EUT 144305 – F, position of accelerometers .................................. 55
Picture 17: Z- Axis EUT 144305 – F, position of accelerometer at housing ..................56
Picture 18: Z- Axis, EUT 144305 – G, Test set-up resonance search........................... 57
Picture 19: Z- Axis EUT 144305 – G, position of accelerometers ................................. 58
Picture 20: Z- Axis EUT 144305 – G, position of accelerometer at housing .................59
Picture 21: X- Axis, EUT 144305 – A, Test set-up resonance search ........................... 60
Picture 22: X- Axis EUT 144305 – A, position of accelerometers .................................61
Picture 23: X- Axis EUT 144305 – A, position of accelerometer at housing..................62
Picture 24: X- Axis, EUT 144305 – B; C & D, Test set-up resonance search ...............63
Picture 25: X- Axis EUT 144305 – B, position of accelerometers .................................64
Picture 26: X- Axis EUT 144305 – C, position of accelerometers, USB- Port ...............65
Picture 27: X- Axis EUT 144305 – C, position of accelerometer at housing .................66
Picture 28: X- Axis EUT 144305 – D, position of accelerometers ................................. 67
Picture 29: X- Axis, EUT 144305 – E, Test set-up resonance search ........................... 68
Picture 30: X- Axis EUT 144305 – E, position of accelerometers .................................69
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 143 of 147
Picture 31: X- Axis EUT 144305 – E, position of accelerometer at housing..................70
Picture 32: X- Axis, EUT 144305 – F, Test set-up resonance search ........................... 71
Picture 33: X- Axis EUT 144305 – F, position of accelerometers.................................. 72
Picture 34: X- Axis EUT 144305 – F, position of accelerometer at housing ..................73
Picture 35: X- Axis, EUT 144305 – G, Test set-up resonance search ..........................74
Picture 36: X- Axis EUT 144305 – G, position of accelerometers ................................. 75
Picture 37: X- Axis EUT 144305 – G, position of accelerometer at housing .................76
Picture 38: Y- Axis, EUT 144305 – A, Test set-up resonance search ........................... 77
Picture 39: Y- Axis EUT 144305 – A, position of accelerometers .................................78
Picture 40: Y- Axis EUT 144305 – A, position of accelerometer at housing..................79
Picture 41: Y- Axis, EUT 144305 – B; C & D, Test set-up resonance search ...............80
Picture 42: Y- Axis EUT 144305 – B, position of accelerometers .................................81
Picture 43: Y- Axis EUT 144305 – B, position of accelerometer at housing..................82
Picture 44: Y- Axis EUT 144305 – C, position of accelerometers ................................. 83
Picture 45: Y- Axis EUT 144305 – D, position of accelerometers ................................. 84
Picture 46: Y- Axis EUT 144305 – D, position of accelerometer at housing .................85
Picture 47: Y- Axis, EUT 144305 – E, Test set-up resonance search ........................... 86
Picture 48: Y- Axis EUT 144305 – E, position of accelerometers .................................87
Picture 49: Y- Axis EUT 144305 – E, position of accelerometer at housing..................88
Picture 50: Y- Axis, EUT 144305 – F, Test set-up resonance search ........................... 89
Picture 51: Y- Axis EUT 144305 – F, position of accelerometers.................................. 90
Picture 52: Y- Axis EUT 144305 – F, position of accelerometer at housing ..................91
Picture 53: Y- Axis, EUT 144305 – G, Test set-up resonance search ..........................92
Picture 54: Y- Axis EUT 144305 – G, position of accelerometers ................................. 93
Picture 55: Y- Axis EUT 144305 – G, position of accelerometer at housing .................94
Picture 56: EUTs in climatic cabinet .............................................................................. 95
Picture 57: Monitoring during climatic tests ................................................................... 96
Picture 57: By the monitoring marked massages .......................................................... 97
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 144 of 147
6 List of Diagrams
Diagram 1:
Vibration, Resonance search profile (exemplary) ................................ 98
Diagram 2:
Resonance search Z- Axis, EUT 144305 – A Housing ........................ 99
Diagram 3:
Resonance search Z- Axis, EUT 144305 – A Ethernetport ..................99
Diagram 4:
Resonance search Z- Axis, EUT 144305 – A, Mounting plate fan ..... 100
Diagram 5:
Resonance search Z- Axis, EUT 144305 – A, PCB ........................... 100
Diagram 6:
Resonance search Z- Axis, EUT 144305 – B, PCB ........................... 101
Diagram 7:
Resonance search Z- Axis, EUT 144305 – B, Housing ..................... 101
Diagram 8:
Resonance search Z- Axis, EUT 144305 – C, PCB ........................... 102
Diagram 9:
Resonance search Z- Axis, EUT 144305 – C, Housing ..................... 102
Diagram 10:
Resonance search Z- Axis, EUT 144305 – D, PCB ........................... 103
Diagram 11:
Resonance search Z- Axis, EUT 144305 – D, Housing ..................... 103
Diagram 12:
Resonance search Z- Axis, EUT 144305 – E, USB- Port PCB .......... 104
Diagram 13:
Resonance search Z- Axis, EUT 144305 – E, PCB ........................... 104
Diagram 14:
Resonance search Z- Axis, EUT 144305 – E, AC filter ......................105
Diagram 15:
Resonance search Z- Axis, EUT 144305 – E, Housing ..................... 105
Diagram 16:
Resonance search Z- Axis, EUT 144305 – F, mounting plate fan ..... 106
Diagram 17:
Resonance search Z- Axis, EUT 144305 – F, heat sink power supply
........................................................................................................... 106
Diagram 18:
Resonance search Z- Axis, EUT 144305 – F, PCB center ................ 107
Diagram 19:
Resonance search Z- Axis, EUT 144305 – F, Housing center........... 107
Diagram 20:
Resonance search Z- Axis, EUT 144305 – G, Mounting plate fan..... 108
Diagram 21:
Resonance search Z- Axis, EUT 144305 – G, PCB center ................108
Diagram 22:
Resonance search Z- Axis, EUT 144305 – G, Housing center .......... 109
Diagram 23:
Resonance search X- Axis, EUT 144305 – A, LED socket ................110
Diagram 24:
Resonance search X- Axis, EUT 144305 – A, Battery socket ............ 110
Diagram 25:
Resonance search X- Axis, EUT 144305 – A, AC- Filter ...................111
Diagram 26:
Resonance search X- Axis, EUT 144305 – A, Housing DVI ..............111
Diagram 27:
Resonance search X- Axis, EUT 144305 – A, Ethernet port ..............112
Diagram 28:
Resonance search X- Axis, EUT 144305 – B, Housing center .......... 113
Diagram 29:
Resonance search X- Axis, EUT 144305 – B, PCB USB ...................113
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 145 of 147
Diagram 30:
Resonance search X- Axis, EUT 144305 – C, Housing center .......... 114
Diagram 31:
Resonance search X- Axis, EUT 144305 – C, PCB Ethernet port ..... 114
Diagram 32:
Resonance search X- Axis, EUT 144305 – D, Housing center .......... 115
Diagram 33:
Resonance search X- Axis, EUT 144305 – D, PCB ........................... 115
Diagram 34:
Resonance search X- Axis, EUT 144305 – E, USB port ....................116
Diagram 35:
Resonance search X- Axis, EUT 144305 – E, Capacitor ................... 116
Diagram 36:
Resonance search X- Axis, EUT 144305 – E, Housing center .......... 117
Diagram 37:
Resonance search X- Axis, EUT 144305 – E, heat sink .................... 117
Diagram 38:
Resonance search X- Axis, EUT 144305 – F, Coil ............................ 118
Diagram 39:
Resonance search X- Axis, EUT 144305 – F, heat sink power module
........................................................................................................... 118
Diagram 40:
Resonance search X- Axis, EUT 144305 – F, Housing center .......... 119
Diagram 41:
Resonance search X- Axis, EUT 144305 – F, Capacitor main PCB .. 119
Diagram 42:
Resonance search X- Axis, EUT 144305 – G, housing center .......... 120
Diagram 43:
Resonance search X- Axis, EUT 144305 – G, PCB Power connector
........................................................................................................... 120
Diagram 44:
Resonance search X- Axis, EUT 144305 – G, heat sink power module
........................................................................................................... 121
Diagram 45:
Resonance search X- Axis, EUT 144305 – G, Capacitor main PCB.. 121
Diagram 46:
Resonance search Y- Axis, EUT 144305 – A, Capacitor ................... 122
Diagram 47:
Resonance search Y- Axis, EUT 144305 – A, fan .............................122
Diagram 48:
Resonance search Y- Axis, EUT 144305 – A, Ethernet port ..............123
Diagram 49:
Resonance search Y- Axis, EUT 144305 – A, Housing center .......... 123
Diagram 50:
Resonance search Y- Axis, EUT 144305 – B, USB port ....................124
Diagram 51:
Resonance search Y- Axis, EUT 144305 – B, housing center ........... 124
Diagram 52:
Resonance search Y- Axis, EUT 144305 – C, Housing center .......... 125
Diagram 53:
Resonance search Y- Axis, EUT 144305 – C, USB port ....................125
Diagram 54:
Resonance search Y- Axis, EUT 144305 – D, Ethernet port ............. 126
Diagram 55:
Resonance search Y- Axis, EUT 144305 – D, Housing center .......... 126
Diagram 56:
Resonance search Y- Axis, EUT 144305 – E, Ethernet port ..............127
Diagram 57:
Resonance search Y- Axis, EUT 144305 – E, AC- filter .................... 127
Diagram 58:
Resonance search Y- Axis, EUT 144305 – E, heat sink power module
........................................................................................................... 128
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 146 of 147
Diagram 59:
Resonance search Y- Axis, EUT 144305 – E, housing center ........... 128
Diagram 60:
Resonance search Y- Axis, EUT 144305 – F, capacitor main PCB ... 129
Diagram 61:
Resonance search Y- Axis, EUT 144305 – F, Housing center .......... 129
Diagram 62:
Resonance search Y- Axis, EUT 144305 – F, capacitor power module
........................................................................................................... 130
Diagram 63:
Resonance search Y- Axis, EUT 144305 – G, Power out ..................131
Diagram 64:
Resonance search Y- Axis, EUT 144305 – G, AC- filter ....................131
Diagram 65:
Resonance search Y- Axis, EUT 144305 – G, fan ............................. 132
Diagram 66:
Resonance search Y- Axis, EUT 144305 – G, housing center .......... 132
Diagram 67:
Resonance search Y- Axis, EUT 144305 – G, heat sink ....................133
Diagram 68:
Resonance search X- Axis, EUT 144305 – H, Housing ..................... 134
Diagram 69:
Resonance search Y- Axis, EUT 144305 – H, Housing ..................... 134
Diagram 70:
Resonance search Z- Axis, EUT 144305 – H, Housing ..................... 135
Diagram 71:
Resonance search X- Axis, EUT 144305 – W, Housing .................... 136
Diagram 72:
Resonance search Y- Axis, EUT 144305 – W, Housing .................... 136
Diagram 73:
Resonance search Z- Axis, EUT 144305 – W, Housing .................... 137
Diagram 74:
Temperature profile, Dry heat storage ............................................... 138
Diagram 75:
Temperature profile, Dry heat function............................................... 139
Diagram 76:
Temperature profile, Low temperature function ................................. 140
Diagram 77:
Climatic profile, Humidity, function ..................................................... 141
Diagram 78:
Monitoring Audio Signal, Humidity, function (exemplary)................... 142
Examiner:
F. Nothnagel
Test Report No.:
Date of issue: 16 September 2014 Order No.:
U144305E1, 2
14-114305
nd
Version
Page 147 of 147

Similar documents