Taps, Dies Extractors, Thread Inserts Accessories

Transcription

Taps, Dies Extractors, Thread Inserts Accessories
Taps, Dies
Extractors, Thread Inserts
Accessories
B
High-Speed Steel Taps & Dies
Taps
Spiral Fluted Taps
Special Thread Taps . . . . . . . . . . . . . . . . . . . . . B2
Multi-Purpose Taps
NEW!
NEW!
Special Purpose Taps
Spiral Pointed . . . . . . . . . . . . . . . . . . . . . . . . . . B3
Spiral Fluted . . . . . . . . . . . . . . . . . . . . . . . . . . . B3
NEW!
NEW!
NEW!
B
For High Tensile Materials
Spiral Pointed . . . . . . . . . . . . . . . . . . . . . . . . . . B5
Spiral Fluted . . . . . . . . . . . . . . . . . . . . . . . . . . . B5
NEW!
B6
B7
B8
B9
B10
B11
B12
B13
B13
B14
B15
B15
Spiral Pointed Taps
Spiral Pointed Alfa USA® . . . . . . . . . . . . . . . . .
Spiral Pointed Eco Pro® . . . . . . . . . . . . . . . . . .
Spiral Pointed Alfa USA®, Black Oxide . . . . . . .
Spiral Pointed Metric . . . . . . . . . . . . . . . . . . . .
Spiral Pointed Oversize + .005 . . . . . . . . . . . . .
Spiral Pointed TiN Coated . . . . . . . . . . . . . . . .
B-ii
Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19
Pipe Taps
Taper Pipe, NPT Regular . . . . . . . . . . . . . . . . . .
Taper Pipe, Interrupted . . . . . . . . . . . . . . . . . . .
Taper Pipe, (Dry Seal) NPTF . . . . . . . . . . . . . . .
Taper Pipe, BSP (British Std .) . . . . . . . . . . . . . .
Straight Pipe, NPS . . . . . . . . . . . . . . . . . . . . . .
B20
B20
B20
B20
B21
Taper Pipe Reamers . . . . . . . . . . . . . . . . . . . . . B21
Hand Taps
NEW!
Thread Forming . . . . . . . . . . . . . . . . . . . . . . . . . B19
NEW!
For Low Tensile Materials
Spiral Pointed . . . . . . . . . . . . . . . . . . . . . . . . . . B4
Spiral Fluted . . . . . . . . . . . . . . . . . . . . . . . . . . . B4
Alfa USA® . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Eco Pro® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alfa USA - Black Oxide . . . . . . . . . . . . . . . . . . .
Special Thread . . . . . . . . . . . . . . . . . . . . . . . . .
Metric Alfa USA® . . . . . . . . . . . . . . . . . . . . . . . .
Metric Eco Pro® . . . . . . . . . . . . . . . . . . . . . . . . .
Metric, Special Thread . . . . . . . . . . . . . . . . . . .
Oversize + .005 . . . . . . . . . . . . . . . . . . . . . . . . .
Eight Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left Hand Metric . . . . . . . . . . . . . . . . . . . . . . . .
Tap Bit / Monolock® 1/4" Power Shank . . . . . .
Screw Thread Insert (STI) Taps . . . . . . . . . . . . . B41
Pulley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19
High Performance Taps
NEW!
Spiral Fluted Taps - 52º Helix . . . . . . . . . . . . . . B18
B16
B16
B16
B17
B17
B17
Rethreading Taps . . . . . . . . . . . . . . . . . . . . . . . B21
Acme Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . B21
Dies
Round Adjustable . . . . . . . . . . . . . . . . . . . . . . .
Round Adjustable, Metric . . . . . . . . . . . . . . . . .
Round Adjustable, Special Thread . . . . . . . . . .
Round Adjustable, Special Thread, Metric . . . .
Hexagon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hexagon Eight Pitch . . . . . . . . . . . . . . . . . . . . .
B22
B23
B24-25
B26
B27
B27
Taps, Dies
Extractors, Thread Inserts
Accessories
B
Tapping Tools & Accessories
Carbon Steel Taps & Dies
Hand Taps
Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . B28
Hand, Metric . . . . . . . . . . . . . . . . . . . . . . B29
Tapping Tools
NEW!
Taper Pipe, NPT . . . . . . . . . . . . . . . . . . . . B30
Spark Plug Taps & Set . . . . . . . . . . . . . . . B30
Dies
Hexagon . . . . . . . . . . . . . . . . . . . . . . . . . . B31
Hexagon - Metric . . . . . . . . . . . . . . . . . . . B31
Hexagon Rethreading . . . . . . . . . . . . . . . B32
Hexagon Rethreading - NPT . . . . . . . . . . B32
Hexagon Rethreading - Left . . . . . . . . . . B32
Hexagon Rethreading - Metric . . . . . . . . B33
Hexagon Rethreading - Metric - Left . . . . B33
Round Adjustable . . . . . . . . . . . . . . . . . . B34
Round Adjustable (British Std .) Pipe Die . B34
T-Handle Tap Wrenches . . . . . . . . . . . . . . B35
With Ratchet . . . . . . . . . . . . . . . . . . . . . B35
With Guide . . . . . . . . . . . . . . . . . . . . . . . . B35
Die Stock . . . . . . . . . . . . . . . . . . . . . . . . . B35
Adjustable Tap / Reamer Wrench . . . . . . B35
Thread Pitch Gages . . . . . . . . . . . . . . . . . B35
Thread Files
Universal . . . . . . . . . . . . . . . . . . . . . . . . . B34
Thread Restoring . . . . . . . . . . . . . . . . . . . B34
Extractors & Extensions
NEW!
Screw Extractors . . . . . . . . . . . . . . . . . . . B36
Tap Extractors . . . . . . . . . . . . . . . . . . . . . B37
Tap Extensions . . . . . . . . . . . . . . . . . . . . . B37
Screw / Thread Inserts & Kits
Solid Screw Inserts & Kits . . . . . . . . . . . . B38
Helical Thread Inserts & Repair Kits . . . . B39-40
Screw Thread Insert (STI) Taps . . . . . . . . . . . . B41
B
Tap & Die Sets
NEW!
High-Speed Steel / Carbon Steel Sets . . B42-44
Hexagon Rethreading Die Sets . . . . . . . . B45
Tap & Drill Sets . . . . . . . . . . . . . . . . . . . . B46
Tap Sets . . . . . . . . . . . . . . . . . . . . . . . . . . B47
Tap Dispenser Cabinets . . . . . . . . . . . . . . B48
Tap Terminology . . . . . . . . . . . . . . . . . . . . . . . B49
B-1
Alfa Tools 24-48 Hour Special Tap Program
Special Thread Taps
We offer special inch and metric HSS taps in a wide range of styles & types;
Straight flute, spiral flute and spiral point geometry.
• Shipment within 24-48 hours on most items.
24-48 Hour Special Taps
• Available in bright finish.
• Coated taps are available with longer delivery time.
• Manufactured in the USA.
• Visit our website for more information.
B
Some of the Special Taps we offer include:
B-2
6mm x 1.0
D3 2 FL.
Spiral Point
#8-32 NC
+.005 2 FL.
Spiral Point for Plating
8mm x 1.25
D3 2FL.
Spiral Point
1/8"-27 NPT/F
Taper Pipe Tap
Spiral Flute
1/4-18 NPTF
Interrupted Thread
5 FL. Taper Pipe x 6"
1/2-28 NEF
H3 4 FL.
Plug Tap
#4-40 NC
L.H. Spiral Point
3/4"-20 NEF
L.H. Hand Tap
5/16-24 NF
H7 4 FL.
Bottoming Tap
1"-8 NC
H4 3 FL.
Spiral Point
#8-36 NF
Form Tap
2"-4-1/2 NC
Hand Tap
Multi-Purpose Taps
For Stainless Steel and
other applications
Ultimate extra life taps for tougher jobs
Features:
HSS-M4 Hi-Vanadium Steel
Ground Thread
Steam Oxide Finish
DIN Flute – ANSI Shank
• Specially designed for a wide range
of materials .
• Steam oxide tempered surface finish .
• Ground thread .
• High wear resistant .
SPIRAL POINTED TAPS
SPIRAL FLUTED TAPS
HIGH-VANADIUM STEEL
48O SPIRAL 8O - 10O HOOK
TPI
NO. OF
FLUTES
GRIND
LIMITS
SEMI-BOTTOMING STyLE
2 - 2-1/2 THREAD CHAMFER
NEW!
STOCK #
TAP
SIZE
TPI
MACHINE SCREW SIZES
4
6
6
8
10
10
40
32
40
32
24
32
2
2
2
3
3
3
H2
H3
H2
H3
H3
H3
1 per pack
20
28
18
24
16
24
14
20
13
20
11
18
10
16
9
14
8
12
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
H5
H4
H5
H4
H5
H4
H5
H5
H5
H5
H6
H5
H6
H5
H6
H6
H6
H6
GRIND
LIMITS
STOCK #
MACHINE SCREW SIZES
HPMP90107
HPMP90111
HPMP90112
HPMP90113
HPMP90115
HPMP90116
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
NO. OF
FLUTES
NEW!
HPMP90130
HPMP90131
HPMP90132
HPMP90133
HPMP90134
HPMP90135
HPMP90136
HPMP90137
HPMP90138
HPMP90139
HPMP90142
HPMP90143
HPMP90146
HPMP90147
HPMP90149
HPMP90150
HPMP90153
HPMP90154
4
6
8
10
10
40
32
32
24
32
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
20
28
18
24
16
24
14
20
13
20
11
18
10
16
9
14
8
12
3
3
3
3
3
H2
H3
H3
H3
H3
HPMP70907
HPMP70911
HPMP70913
HPMP70915
HPMP70916
Multi-Purpose Taps
PLUG CHAMFER
TAP
SIZE
• Suitable for high strength steels, tool steels
and stainless steels .
• For threading up to HRC40 hardened material .
• With thread relief to suit specific applications .
• 2B class of fit .
FRACTIONAL
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
H5
H4
H5
H4
H5
H4
H5
H5
H5
H5
H6
H5
H6
H5
H6
H6
H6
H6
HPMP70930
HPMP70931
HPMP70932
HPMP70933
HPMP70934
HPMP70935
HPMP70936
HPMP70937
HPMP70938
HPMP70939
HPMP70942
HPMP70943
HPMP70946
HPMP70947
HPMP70949
HPMP70950
HPMP70953
HPMP70954
B
1 per pack
B-3
High Performance Taps
For Low Tensile Materials
(Mild Steel)
With thread relief to suit specific applications
Features:
High Performance Taps
HSS-M4 Hi-Vanadium Steel
Ground Thread
Steam Oxide Finish
• Specially designed for low tensile materials,
such as carbon steel 1010 or 1018 .
• Steam oxide tempered surface finish .
• Ground thread .
SPIRAL POINTED TAPS
SPIRAL FLUTED TAPS
HIGH-VANADIUM STEEL
50O SPIRAL 10O - 12O HOOK
PLUG CHAMFER
TAP
SIZE
TPI
NO. OF
FLUTES
GRIND
LIMITS
STOCK #
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1 per pack
B-4
TAP
SIZE
TPI
40
32
40
32
24
32
2
2
2
3
3
3
H2
H3
H2
H3
H3
H3
20
28
18
24
16
24
14
20
13
20
11
18
10
16
9
14
8
12
3
3
2
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
H5
H4
H5
H4
H5
H4
H5
H5
H5
H5
H5
H5
H5
H5
H6
H6
H6
H6
NO. OF
FLUTES
GRIND
LIMITS
NEW!
STOCK #
MACHINE SCREW SIZES
HPLT30707
HPLT30711
HPLT30712
HPLT30713
HPLT30715
HPLT30716
FRACTIONAL
B
SEMI-BOTTOMING STyLE
2 - 2-1/2 THREAD CHAMFER
NEW!
MACHINE SCREW SIZES
4
6
6
8
10
10
• High wear resistant .
• For working on materials up to HRC-32 .
HPLT30730
HPLT30731
HPLT30732
HPLT30733
HPLT30734
HPLT30735
HPLT30736
HPLT30737
HPLT30738
HPLT30739
HPLT30742
HPLT30743
HPLT30746
HPLT30747
HPLT30749
HPLT30750
HPLT30753
HPLT30754
4
6
8
10
10
40
32
32
24
32
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
20
28
18
24
16
24
14
20
13
20
11
18
10
16
9
14
8
12
3
3
3
3
3
H2
H3
H3
H3
H3
HPLT71107
HPLT71111
HPLT71113
HPLT71115
HPLT71116
FRACTIONAL
1 per pack
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
H5
H4
H5
H4
H5
H4
H5
H5
H5
H5
H5
H5
H5
H5
H6
H6
H6
H6
HPLT71130
HPLT71131
HPLT71132
HPLT71133
HPLT71134
HPLT71135
HPLT71136
HPLT71137
HPLT71138
HPLT71139
HPLT71142
HPLT71143
HPLT71146
HPLT71147
HPLT71149
HPLT71150
HPLT71153
HPLT71154
High Performance Taps
For High Tensile Materials
(Titanium & Nickel Alloys)
With thread relief to suit specific applications
Features:
HSS-PM Sintered Metal Steel
Ground Thread
Steam Oxide Finish
• Specially designed for high tensile
materials .
• Steam oxide tempered surface finish .
• Ground thread .
• High wear resistant .
SPIRAL POINTED TAPS
SPIRAL FLUTED TAPS
HIGH-VANADIUM STEEL
24O SPIRAL 8O - 10O HOOK
TPI
NO. OF
FLUTES
GRIND
LIMITS
SEMI-BOTTOMING STyLE
2 - 2-1/2 THREAD CHAMFER
NEW!
STOCK #
TAP
SIZE
TPI
MACHINE SCREW SIZES
4
5
6
8
10
10
40
40
32
32
24
32
2
2
2
3
3
3
H2
H2
H3
H3
H3
H3
1 per pack
20
28
18
24
16
24
14
20
13
20
11
18
10
16
3
3
3
3
3
3
3
3
3
3
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
GRIND
LIMITS
STOCK #
MACHINE SCREW SIZES
HPHT90207
HPHT90211
HPHT90212
HPHT90213
HPHT90215
HPHT90216
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
NO. OF
FLUTES
NEW!
HPHT90230
HPHT90231
HPHT90232
HPHT90233
HPHT90234
HPHT90235
HPHT90236
HPHT90237
HPHT90238
HPHT90239
HPHT90242
HPHT90243
HPHT90246
HPHT90247
4
6
8
10
10
40
32
32
24
32
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
20
28
18
24
16
24
14
20
13
20
11
18
10
16
3
3
3
3
3
H2
H3
H3
H3
H3
HPHT71007
HPHT71011
HPHT71013
HPHT71015
HPHT71016
High Performance Taps
PLUG CHAMFER
TAP
SIZE
• For use on hardened materials up
to HRC-44 .
• Suitable for alloy steels, tool steels,
nickel alloy and titanium alloy steel .
FRACTIONAL
3
3
3
3
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
HPHT71030
HPHT71031
HPHT71032
HPHT71033
HPHT71034
HPHT71035
HPHT71036
HPHT71037
HPHT71038
HPHT71039
HPHT71042
HPHT71043
HPHT71046
HPHT71047
B
1 per pack
B-5
Hand Taps - Alfa USA
Super High-Speed Steel
Ground Thread, Right Hand
Features:
• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
Taper, Plug, Bottoming & Sets
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
NC = National Coarse NF = National Fine
TAP
SIZE
THREADS PER INCH
NC NF NS
NO. OF
FLUTES
GRIND
LIMITS
NS = National Standard
TAPER
PLUG
STOCK #
BOTTOM
SET OF 3
Hand Taps – Alfa USA
MACHINE SCREW SIZES
B
0
1
1
2
2
3
3
4
4
4
5
5
6
6
8
8
10
10
12
12
80
64
72
56
64
48
56
40
48
36
40
44
32
40
32
36
24
32
24
28
2
2
2
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
H1
H1
H1
H2
H2
H2
H2
H2
H2
H2
H2
H2
H3
H2
H3
H2
H3
H3
H3
H3
HTT170000
HTT170001
HTT170002
HTT170003
HTT170004
HTT170005
HTT170006
HTT170007
HTT170008
HTT170008A
HTT170009
HTT170010
HTT170011
HTT170012
HTT170013
HTT170014
HTT170015
HTT170016
HTT170017
HTT170018
HTP170000
HTP170001
HTP170002
HTP170003
HTP170004
HTP170005
HTP170006
HTP170007
HTP170008
HTP170008A
HTP170009
HTP170010
HTP170011
HTP170012
HTP170013
HTP170014
HTP170015
HTP170016
HTP170017
HTP170018
HTB170000
HTB170001
HTB170002
HTB170003
HTB170004
HTB170005
HTB170006
HTB170007
HTB170008
HTB170008A
HTB170009
HTB170010
HTB170011
HTB170012
HTB170013
HTB170014
HTB170015
HTB170016
HTB170017
HTB170018
HTS170000
HTS170001
HTS170002
HTS170003
HTS170004
HTS170005
HTS170006
HTS170007
HTS170008
HTS170008A
HTS170009
HTS170010
HTS170011
HTS170012
HTS170013
HTS170014
HTS170015
HTS170016
HTS170017
HTS170018
HTP170030
HTP170031
HTP170032
HTP170033
HTP170034
HTP170035
HTP170036
HTP170037
HTP170038
HTP170039
HTP170040
HTP170041
HTP170042
HTP170043
HTP170044
HTP170045
HTP170046
HTP170047
HTP170048
HTP170049
HTP170050
HTP170051
HTP170052
HTP170053
HTP170054
HTP170055
HTP170056
HTP170057
HTP170058
HTP170059
HTP170060
HTB170030
HTB170031
HTB170032
HTB170033
HTB170034
HTB170035
HTB170036
HTB170037
HTB170038
HTB170039
HTB170040
HTB170041
HTB170042
HTB170043
HTB170044
HTB170045
HTB170046
HTB170047
HTB170048
HTB170049
HTB170050
HTB170051
HTB170052
HTB170053
HTB170054
HTB170055
HTB170056
HTB170057
HTB170058
HTB170059
HTB170060
HTS170030
HTS170031
HTS170032
HTS170033
HTS170034
HTS170035
HTS170036
HTS170037
HTS170038
HTS170039
HTS170040
HTS170041
HTS170042
HTS170043
HTS170044
HTS170045
HTS170046
HTS170047
HTS170048
HTS170049
HTS170050
HTS170051
HTS170052
HTS170053
HTS170054
HTS170055
HTS170056
HTS170057
HTS170058
HTS170059
HTS170060
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
11/16"
11/16"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
11
16
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
Bulk 0 to 1/4", 12 per pack
5/16" to 1/2", 6 per pack
B-6
NF
NC
NF
NC
NF
NC
NF
NC
NF
NS
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NS
NS
NC
NF
NC
NF
NC
NF
NS
NC
NF
NC
NF
NC
NF
NC
NF
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
4
6
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
HTT170030
HTT170031
HTT170032
HTT170033
HTT170034
HTT170035
HTT170036
HTT170037
HTT170038
HTT170039
HTT170040
HTT170041
HTT170042
HTT170043
HTT170044
HTT170045
HTT170046
HTT170047
HTT170048
HTT170049
HTT170050
HTT170051
HTT170052
HTT170053
HTT170054
HTT170055
HTT170056
HTT170057
HTT170058
HTT170059
HTT170060
9/16" to 1", 3 per pack
1-1/8" to 1-1/2", 1 per pack
Sets 3 taps per box, 1 each Taper, Plug and Bottom per size
Hand Taps - Eco Pro
Super High-Speed Steel
Ground Thread, Right Hand
Taper, Plug, Bottoming & Sets
Features:
• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
NC = National Coarse NF = National Fine
TAP
SIZE
THREADS PER INCH
NC NF NS
NO. OF
FLUTES
GRIND
LIMITS
NS = National Standard
TAPER
PLUG
STOCK #
BOTTOM
SET OF 3
MACHINE SCREW SIZES
80
64
72
56
64
48
56
40
48
40
44
32
40
32
36
24
32
24
28
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
H1
H1
H1
H2
H2
H2
H2
H2
H2
H2
H2
H3
H2
H3
H2
H3
H3
H3
H3
HTT270000
HTT270001
HTT270002
HTT270003
HTT270004
HTT270005
HTT270006
HTT270007
HTT270008
HTT270009
HTT270010
HTT270011
HTT270012
HTT270013
HTT270014
HTT270015
HTT270016
HTT270017
HTT270018
HTP270000
HTP270001
HTP270002
HTP270003
HTP270004
HTP270005
HTP270006
HTP270007
HTP270008
HTP270009
HTP270010
HTP270011
HTP270012
HTP270013
HTP270014
HTP270015
HTP270016
HTP270017
HTP270018
HTB270000
HTB270001
HTB270002
HTB270003
HTB270004
HTB270005
HTB270006
HTB270007
HTB270008
HTB270009
HTB270010
HTB270011
HTB270012
HTB270013
HTB270014
HTB270015
HTB270016
HTB270017
HTB270018
HTS270000
HTS270001
HTS270002
HTS270003
HTS270004
HTS270005
HTS270006
HTS270007
HTS270008
HTS270009
HTS270010
HTS270011
HTS270012
HTS270013
HTS270014
HTS270015
HTS270016
HTS270017
HTS270018
HTP270030
HTP270031
HTP270032
HTP270033
HTP270034
HTP270035
HTP270036
HTP270037
HTP270038
HTP270039
HTP270040
HTP270041
HTP270042
HTP270043
HTP270044
HTP270045
HTP270046
HTP270047
HTP270048
HTP270049
HTP270050
HTP270051
HTP270052
HTP270053
HTP270054
HTP270055
HTP270056
HTP270057
HTP270058
HTP270059
HTP270060
HTB270030
HTB270031
HTB270032
HTB270033
HTB270034
HTB270035
HTB270036
HTB270037
HTB270038
HTB270039
HTB270040
HTB270041
HTB270042
HTB270043
HTB270044
HTB270045
HTB270046
HTB270047
HTB270048
HTB270049
HTB270050
HTB270051
HTB270052
HTB270053
HTB270054
HTB270055
HTB270056
HTB270057
HTB270058
HTB270059
HTB270060
HTS270030
HTS270031
HTS270032
HTS270033
HTS270034
HTS270035
HTS270036
HTS270037
HTS270038
HTS270039
HTS270040
HTS270041
HTS270042
HTS270043
HTS270044
HTS270045
HTS270046
HTS270047
HTS270048
HTS270049
HTS270050
HTS270051
HTS270052
HTS270053
HTS270054
HTS270055
HTS270056
HTS270057
HTS270058
HTS270059
HTS270060
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
11/16"
11/16"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
11
16
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
Bulk 0 to 1/4", 10 per pack
5/16" to 1/2", 5 per pack
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NS
NS
NC
NF
NC
NF
NC
NF
NS
NC
NF
NC
NF
NC
NF
NC
NF
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
HTT270030
HTT270031
HTT270032
HTT270033
HTT270034
HTT270035
HTT270036
HTT270037
HTT270038
HTT270039
HTT270040
HTT270041
HTT270042
HTT270043
HTT270044
HTT270045
HTT270046
HTT270047
HTT270048
HTT270049
HTT270050
HTT270051
HTT270052
HTT270053
HTT270054
HTT270055
HTT270056
HTT270057
HTT270058
HTT270059
HTT270060
9/16" to 1", 3 per pack
1-1/8" to 1-1/2", 1 per pack
Hand Taps – Eco Pro
0
1
1
2
2
3
3
4
4
5
5
6
6
8
8
10
10
12
12
B
Sets 3 taps per box, 1 each Taper, Plug and Bottom per size
B-7
Hand Taps - Alfa USA - Black Oxide
Super High-Speed Steel
Ground Thread, Right Hand
Features:
Taper, Plug, Bottoming & Sets
Hand Taps – Alfa USA - Black Oxide
Black oxide surface treatment
provides extra lubricity, increases
wear resistance and extends tool life.
B
• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• For use in Oil Field, Pipe Line and Heat Exchanger Applications .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
NC = National Coarse NF = National Fine
TAP
SIZE
THREADS PER INCH
NC NF NS
NO. OF
FLUTES
GRIND
LIMITS
NS = National Standard
TAPER
PLUG
STOCK #
BOTTOM
NEW!
SET OF 3
MACHINE SCREW SIZES
1
1
2
2
3
3
4
4
4
5
5
6
6
8
8
10
10
12
12
64
72
56
64
48
56
40
48
36
40
44
32
40
32
36
24
32
24
28
NC
NF
NC
NF
NC
NF
NC
NF
NS
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
2
2
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
H1
H1
H2
H2
H2
H2
H2
H2
H2
H2
H2
H3
H2
H3
H2
H3
H3
H3
H3
HTT80001
HTT80002
HTT80003
HTT80004
HTT80005
HTT80006
HTT80007
HTT80008
HTT80008A
HTT80009
HTT80010
HTT80011
HTT80012
HTT80013
HTT80014
HTT80015
HTT80016
HTT80017
HTT80018
HTP80001
HTP80002
HTP80003
HTP80004
HTP80005
HTP80006
HTP80007
HTP80008
HTP80008A
HTP80009
HTP80010
HTP80011
HTP80012
HTP80013
HTP80014
HTP80015
HTP80016
HTP80017
HTP80018
HTB80001
HTB80002
HTB80003
HTB80004
HTB80005
HTB80006
HTB80007
HTB80008
HTB80008A
HTB80009
HTB80010
HTB80011
HTB80012
HTB80013
HTB80014
HTB80015
HTB80016
HTB80017
HTB80018
HTP80030
HTP80031
HTP80032
HTP80033
HTP80034
HTP80035
HTP80036
HTP80037
HTP80038
HTP80039
HTP80040
HTP80041
HTP80042
HTP80043
HTP80044
HTP80045
HTP80046
HTP80047
HTP80048
HTP80049
HTP80050
HTP80051
HTP80052
HTP80053
HTP80054
HTP80055
HTP80056
HTP80057
HTP80058
HTP80059
HTP80060
HTB80030
HTB80031
HTB80032
HTB80033
HTB80034
HTB80035
HTB80036
HTB80037
HTB80038
HTB80039
HTB80040
HTB80041
HTB80042
HTB80043
HTB80044
HTB80045
HTB80046
HTB80047
HTB80048
HTB80049
HTB80050
HTB80051
HTB80052
HTB80053
HTB80054
HTB80055
HTB80056
HTB80057
HTB80058
HTB80059
HTB80060
HTS80001
HTS80002
HTS80003
HTS80004
HTS80005
HTS80006
HTS80007
HTS80008
HTS80008A
HTS80009
HTS80010
HTS80011
HTS80012
HTS80013
HTS80014
HTS80015
HTS80016
HTS80017
HTS80018
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
11/16"
11/16"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
B-8
20
28
18
24
16
24
14
20
13
20
12
18
11
18
11
16
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NC
NF
NS
NS
NC
NF
NC
NF
NC
NF
NS
NC
NF
NC
NF
NC
NF
NC
NF
Bulk 1 to 1/4", 12 per pack
5/16" to 1/2", 6 per pack
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
4
6
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
HTT80030
HTT80031
HTT80032
HTT80033
HTT80034
HTT80035
HTT80036
HTT80037
HTT80038
HTT80039
HTT80040
HTT80041
HTT80042
HTT80043
HTT80044
HTT80045
HTT80046
HTT80047
HTT80048
HTT80049
HTT80050
HTT80051
HTT80052
HTT80053
HTT80054
HTT80055
HTT80056
HTT80057
HTT80058
HTT80059
HTT80060
9/16" to 1", 3 per pack
1-1/8" to 1-1/2", 1 per pack
HTS80030
HTS80031
HTS80032
HTS80033
HTS80034
HTS80035
HTS80036
HTS80037
HTS80038
HTS80039
HTS80040
HTS80041
HTS80042
HTS80043
HTS80044
HTS80045
HTS80046
HTS80047
HTS80048
HTS80049
HTS80050
HTS80051
HTS80052
HTS80053
HTS80054
HTS80055
HTS80056
HTS80057
HTS80058
HTS80059
HTS80060
Sets 3 taps per box, 1 each Taper, Plug and Bottom per size
Hand Taps - Special Thread
Super High-Speed Steel
Ground Thread, Right Hand
Features:
• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials.
• Standard “H” limits provide adequate “class of fit.”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
Any special thread
pitch tap is available.
Call for details.
TAPER / PLUG / BOTTOMING
PLEASE SPECIFY (T) TAPER / (P) PLUG / (B) BOTTOMING WHEN ORDERING i .e . HTSP T 71301
6-36
6-48
8-24
8-40
8-48
10-28
10-36
10-40
10-48
12-32
12-36
12-40
12-48
1/4-24
1/4-32
1/4-36
1/4-40
5/16-20
5/16-22
5/16-32
5/16-36
5/16-40
3/8-14
3/8-18
3/8-20
3/8-32
3/8-40
7/16-24
7/16-27
7/16-28
1/2-12
1/2-14
1/2-16
1/2-18
1/2-24
1/2-28
1/2-32
1/2-40
9/16-16
9/16-20
9/16-24
9/16-27
9/16-28
9/16-30
9/16-32
9/16-40
5/8-12
5/8-14
5/8-16
5/8-20
1 per pack
STOCK #
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
71301
71302
71303
71304
71305
71306
71307
71308
71309
71310
71311
71312
71313
71314
71315
71316
71317
71318
71319
71320
71321
71322
71323
71324
71325
71326
71327
71328
71329
71330
71331
71332
71333
71334
71335
71336
71337
71338
71339
71340
71341
71342
71343
71344
71345
71346
71347
71348
71349
71350
TAP SIZE
x TPI
STOCK #
TAP SIZE
x TPI
5/8-24
5/8-26
5/8-27
5/8-28
5/8-32
5/8-36
5/8-40
11/16-12
11/16-18
11/16-20
11/16-24
11/16-27
11/16-32
3/4-12
3/4-14
3/4-18
3/4-20
3/4-24
3/4-26
3/4-27
3/4-28
3/4-32
3/4-36
13/16-10
13/16-12
13/16-14
13/16-16
13/16-18
13/16-20
13/16-24
13/16-26
13/16-28
13/16-32
13/16-36
7/8-12
7/8-16
7/8-18
7/8-20
7/8-24
7/8-27
7/8-32
7/8-40
15/16-12
15/16-16
15/16-18
15/16-20
15/16-24
15/16-27
15/16-32
1-10
HTSP 71351
HTSP 71352
HTSP 71353
HTSP 71354
HTSP 71355
HTSP 71356
HTSP 71357
HTSP 71358
HTSP 71359
HTSP 71360
HTSP 71361
HTSP 71362
HTSP 71363
HTSP 71364
HTSP 71365
HTSP 71366
HTSP 71367
HTSP71368
HTSP 71369
HTSP 71370
HTSP 71371
HTSP 71372
HTSP 71373
HTSP 71374
HTSP 71375
HTSP 71376
HTSP 71377
HTSP 71378
HTSP 71379
HTSP 71380
HTSP 71381
HTSP 71382
HTSP 71383
HTSP 71384
HTSP 71385
HTSP 71386
HTSP 71387
HTSP 71388
HTSP 71389
HTSP 71390
HTSP 71391
HTSP 71392
HTSP 71393
HTSP 71394
HTSP 71395
HTSP 71396
HTSP 71397
HTSP 71398
HTSP 71399
HTSP 71400
1-16
1-18
1-20
1-24
1-26
1-27
1-28
1-32
1-36
1-40
1 1/16-8
1 1/16-12
1 1/16-14
1 1/16-16
1 1/16-18
1 1/16-20
1 1/16-24
1 1/16-32
1 1/8-8
1 1/8-10
1 1/8-16
1 1/8-18
1 1/8-20
1 1/8-24
1 1/8-27
1 1/8-32
1 3/16-8
1 3/16-12
1 3/16-14
1 3/16-16
1 3/16-18
1 3/16-20
1 3/16-24
1 3/16-32
1 1/4-8
1 1/4-10
1 1/4-14
1 1/4-16
1 1/4-18
1 1/4-20
1 1/4-24
1 1/4-26
1 1/4-32
1 5/16-8
1 5/16-12
1 5/16-14
1 5/16-16
1 5/16-18
1 5/16-20
1 3/8-8
STOCK #
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
71401
71402
71403
71404
71405
71406
71407
71408
71409
71410
71411
71412
71413
71414
71415
71416
71417
71418
71419
71420
71421
71422
71423
71424
71425
71426
71427
71428
71429
71430
71431
71432
71433
71434
71435
71436
71437
71438
71439
71440
71441
71442
71443
71444
71445
71446
71447
71448
71449
71450
TAP SIZE
x TPI
1 3/8-10
1 3/8-14
1 3/8-16
1 3/8-18
1 3/8-20
1 3/8-24
1 7/16-12
1 7/16-16
1 7/16-18
1 7/16-20
1 1/2-8
1 1/2-10
1 1/2-14
1 1/2-16
1 1/2-18
1 1/2-20
1 1/2-24
1 1/2-32
1 9/16-12
1 9/16-16
1 9/16-18
1 9/16-20
1 5/8-5-1/2
1 5/8-8
1 5/8-12
1 5/8-16
1 5/8-18
1 5/8-20
1 11/16-12
1 11/16-16
1 11/16-18
1 11/16-20
1 3/4-5
1 3/4-6
1 3/4-8
1 3/4-10
1 3/4-12
1 3/4-14
1 3/4-16
1 3/4-18
1 3/4-20
1 3/4-24
1 7/8-5
1 7/8-8
1 7/8-12
1 7/8-16
1 7/8-18
1 7/8-20
1 15/16-12
1 15/16-16
STOCK #
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
HTSP
71451
71452
71453
71454
71455
71456
71457
71458
71459
71460
71461
71462
71463
71464
71465
71466
71467
71468
71469
71470
71471
71472
71473
71474
71475
71476
71477
71478
71479
71480
71481
71482
71483
71484
71485
71486
71487
71488
71489
71490
71491
71492
71493
71494
71495
71496
71497
71498
71499
71500
TAP SIZE
x TPI
STOCK #
1 15/16-18
2-4 1/2
2-8
2-10
2-12
2-14
2-16
2-18
2-20
2 1/8-8
2 1/8-12
2 1/4-4 1/2
2 1/4-8
2 1/4-12
2 1/4-14
2 1/4-16
2 1/4-18
2 3/8-8
2 3/8-12
2 3/8-16
2 3/8-18
2 1/2-4
2 1/2-8
2 1/2-12
2 1/2-16
2 5/8-8
2 5/8-12
2 5/8-16
2 3/4-8
2 3/4-12
2 3/4-16
2 7/8-8
2 7/8-12
3-4
3-8
3-12
3-16
3-18
3 1/4-8
3 1/4-12
3 1/2-4
3 1/2-8
3 1/2-12
3 3/4-8
3 3/4-12
4-8
4-12
HTSP 71501
HTSP 71502
HTSP 71503
HTSP 71504
HTSP 71505
HTSP 71506
HTSP 71507
HTSP 71508
HTSP 71509
HTSP 71510
HTSP 71511
HTSP 71512
HTSP 71513
HTSP 71514
HTSP 71515
HTSP 71516
HTSP 71517
HTSP 71518
HTSP 71519
HTSP 71520
HTSP 71521
HTSP 71522
HTSP 71523
HTSP 71524
HTSP 71525
HTSP 71527
HTSP 71528
HTSP 71529
HTSP 71530
HTSP 71531
HTSP 71532
HTSP 71533
HTSP 71534
HTSP 71535
HTSP 71536
HTSP 71537
HTSP 71538
HTSP 71539
HTSP 71540
HTSP 71541
HTSP 71542
HTSP 71543
HTSP 71544
HTSP 71545
HTSP 71546
HTSP 71547
HTSP 71548
Hand Taps – Special Thread
MACHINE SCREW & FRACTIONAL SIZES
TAP SIZE
x TPI
B
B-9
Metric Hand Taps - Alfa USA
High-Speed Steel
Ground Thread
Right Hand
Features:
• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
Metric Hand Taps
Expanded
B
PITCH
NO. OF
FLUTES
GRIND
LIMITS
TAPER
PLUG
BOTTOM
SET OF 3
2
2.2
2.5
3
3.5
4
4.5
5
6
7
8
8
10
10
12
12
14
14
16
16
18
18
20
20
22
22
24
24
27
27
30
30
33
33
36
0.40
0.45
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.25
1.00
1.50
1.25
1.75
1.25
2.00
1.50
2.00
1.50
2.50
1.50
2.50
1.50
2.50
1.50
3.00
2.00
3.00
2.00
3.50
2.00
3.50
2.00
4.00
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
D3
D3
D3
D3
D4
D4
D4
D4
D5
D5
D5
D5
D6
D5
D6
D6
D7
D6
D7
D6
D7
D6
D7
D6
D7
D6
D8
D7
D8
D7
D9
D7
D9
D7
D9
HSMTT171004
HSMTT171006
HSMTT171008
HSMTT171010
HSMTT171012
HSMTT171014
HSMTT171015
HSMTT171016
HSMTT171020
HSMTT171023
HSMTT171024
HSMTT171025
HSMTT171027
HSMTT171028
HSMTT171031
HSMTT171033
HSMTT171034
HSMTT171035
HSMTT171037
HSMTT171038
HSMTT171039
HSMTT171042
HSMTT171043
HSMTT171044
HSMTT171047
HSMTT171048
HSMTT171049
HSMTT171050
HSMTT171052
HSMTT171053
HSMTT171054
HSMTT171055
HSMTT171058
HSMTT171059
HSMTT171060
HSMTP171004
HSMTP171006
HSMTP171008
HSMTP171010
HSMTP171012
HSMTP171014
HSMTP171015
HSMTP171016
HSMTP171020
HSMTP171023
HSMTP171024
HSMTP171025
HSMTP171027
HSMTP171028
HSMTP171031
HSMTP171033
HSMTP171034
HSMTP171035
HSMTP171037
HSMTP171038
HSMTP171039
HSMTP171042
HSMTP171043
HSMTP171044
HSMTP171047
HSMTP171048
HSMTP171049
HSMTP171050
HSMTP171052
HSMTP171053
HSMTP171054
HSMTP171055
HSMTP171058
HSMTP171059
HSMTP171060
HSMTB171004
HSMTB171006
HSMTB171008
HSMTB171010
HSMTB171012
HSMTB171014
HSMTB171015
HSMTB171016
HSMTB171020
HSMTB171023
HSMTB171024
HSMTB171025
HSMTB171027
HSMTB171028
HSMTB171031
HSMTB171033
HSMTB171034
HSMTB171035
HSMTB171037
HSMTB171038
HSMTB171039
HSMTB171042
HSMTB171043
HSMTB171044
HSMTB171047
HSMTB171048
HSMTB171049
HSMTB171050
HSMTB171052
HSMTB171053
HSMTB171054
HSMTB171055
HSMTB171058
HSMTB171059
HSMTB171060
HSMTS171004
HSMTS171006
HSMTS171008
HSMTS171010
HSMTS171012
HSMTS171014
HSMTS171015
HSMTS171016
HSMTS171020
HSMTS171023
HSMTS171024
HSMTS171025
HSMTS171027
HSMTS171028
HSMTS171031
HSMTS171033
HSMTS171034
HSMTS171035
HSMTS171037
HSMTS171038
HSMTS171039
HSMTS171042
HSMTS171043
HSMTS171044
HSMTS171047
HSMTS171048
HSMTS171049
HSMTS171050
HSMTS171052
HSMTS171053
HSMTS171054
HSMTS171055
HSMTS171058
HSMTS171059
HSMTS171060
2 to 6mm, 12 per pack, 7 to 12mm, 6 per pack
14 to 27mm, 3 per pack, 30mm and above 1 per pack
B-10
STOCK #
TAP
SIZE
Sets 3 taps per box, 1 each Taper, Plug and Bottom per size
Metric Hand Taps - Eco Pro
High-Speed Steel
Ground Thread
Right Hand
Features:
• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
Expanded
STOCK #
PITCH
NO. OF
FLUTES
GRIND
LIMITS
TAPER
PLUG
BOTTOM
SET OF 3
2
2.2
2.3
2.5
3
3.5
4
4
4.5
5
5
5
6
6
7
8
8
9
10
10
10
11
12
12
12
14
14
14
16
16
18
18
18
18
20
20
20
20
22
22
24
24
24
27
27
30
30
30
32
33
33
36
0.40
0.45
0.40
0.45
0.50
0.60
0.50
0.70
0.75
0.80
0.90
0.50
1.00
0.75
1.00
1.25
1.00
1.25
1.50
1.25
1.00
1.50
1.75
1.50
1.25
2.00
1.50
1.25
2.00
1.50
2.50
2.00
1.00
1.50
2.50
1.50
1.00
2.00
2.50
1.50
3.00
2.00
1.50
3.00
2.00
3.50
2.00
1.50
2.00
3.50
2.00
4.00
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
D3
D3
D3
D3
D3
D4
D3
D4
D4
D4
D4
D3
D5
D3
D5
D5
D5
D5
D6
D5
D5
D6
D6
D6
D6
D7
D6
D5
D7
D6
D7
D7
D5
D6
D7
D6
D5
D7
D7
D6
D8
D7
D6
D8
D7
D9
D7
D6
D7
D9
D7
D9
HSMTT271004
HSMTT271006
HSMTT271007
HSMTT271008
HSMTT271010
HSMTT271012
HSMTT271013
HSMTT271014
HSMTT271015
HSMTT271016
HSMTT271017
HSMTT271018
HSMTT271020
HSMTT271021
HSMTT271023
HSMTT271024
HSMTT271025
HSMTT271026
HSMTT271027
HSMTT271028
HSMTT271029
HSMTT271030
HSMTT271031
HSMTT271032
HSMTT271033
HSMTT271034
HSMTT271035
HSMTT271036
HSMTT271037
HSMTT271038
HSMTT271039
HSMTT271040
HSMTT271041
HSMTT271042
HSMTT271043
HSMTT271044
HSMTT271045
HSMTT271046
HSMTT271047
HSMTT271048
HSMTT271049
HSMTT271050
HSMTT271051
HSMTT271052
HSMTT271053
HSMTT271054
HSMTT271055
HSMTT271056
HSMTT271057
HSMTT271058
HSMTT271059
HSMTT271060
HSMTP271004
HSMTP271006
HSMTP271007
HSMTP271008
HSMTP271010
HSMTP271012
HSMTP271013
HSMTP271014
HSMTP271015
HSMTP271016
HSMTP271017
HSMTP271018
HSMTP271020
HSMTP271021
HSMTP271023
HSMTP271024
HSMTP271025
HSMTP271026
HSMTP271027
HSMTP271028
HSMTP271029
HSMTP271030
HSMTP271031
HSMTP271032
HSMTP271033
HSMTP271034
HSMTP271035
HSMTP271036
HSMTP271037
HSMTP271038
HSMTP271039
HSMTP271040
HSMTP271041
HSMTP271042
HSMTP271043
HSMTP271044
HSMTP271045
HSMTP271046
HSMTP271047
HSMTP271048
HSMTP271049
HSMTP271050
HSMTP271051
HSMTP271052
HSMTP271053
HSMTP271054
HSMTP271055
HSMTP271056
HSMTP271057
HSMTP271058
HSMTP271059
HSMTP271060
HSMTB271004
HSMTB271006
HSMTB271007
HSMTB271008
HSMTB271010
HSMTB271012
HSMTB271013
HSMTB271014
HSMTB271015
HSMTB271016
HSMTB271017
HSMTB271018
HSMTB271020
HSMTB271021
HSMTB271023
HSMTB271024
HSMTB271025
HSMTB271026
HSMTB271027
HSMTB271028
HSMTB271029
HSMTB271030
HSMTB271031
HSMTB271032
HSMTB271033
HSMTB271034
HSMTB271035
HSMTB271036
HSMTB271037
HSMTB271038
HSMTB271039
HSMTB271040
HSMTB271041
HSMTB271042
HSMTB271043
HSMTB271044
HSMTB271045
HSMTB271046
HSMTB271047
HSMTB271048
HSMTB271049
HSMTB271050
HSMTB271051
HSMTB271052
HSMTB271053
HSMTB271054
HSMTB271055
HSMTB271056
HSMTB271057
HSMTB271058
HSMTB271059
HSMTB271060
HSMTS271004
HSMTS271006
HSMTS271007
HSMTS271008
HSMTS271010
HSMTS271012
HSMTS271013
HSMTS271014
HSMTS271015
HSMTS271016
HSMTS271017
HSMTS271018
HSMTS271020
HSMTS271021
HSMTS271023
HSMTS271024
HSMTS271025
HSMTS271026
HSMTS271027
HSMTS271028
HSMTS271029
HSMTS271030
HSMTS271031
HSMTS271032
HSMTS271033
HSMTS271034
HSMTS271035
HSMTS271036
HSMTS271037
HSMTS271038
HSMTS271039
HSMTS271040
HSMTS271041
HSMTS271042
HSMTS271043
HSMTS271044
HSMTS271045
HSMTS271046
HSMTS271047
HSMTS271048
HSMTS271049
HSMTS271050
HSMTS271051
HSMTS271052
HSMTS271053
HSMTS271054
HSMTS271055
HSMTS271056
HSMTS271057
HSMTS271058
HSMTS271059
HSMTS271060
2 to 6mm, 10 per pack, 7 to 12mm, 5 per pack
14 to 27mm, 3 per pack, 30mm and above 1 per pack
Metric Hand Taps
TAP
SIZE
B
Sets 3 taps per box, 1 each Taper, Plug and Bottom per size
• ECO PRO Taps are
manufactured in Europe .
B-11
Metric Hand Taps - Special Thread
High-Speed Steel
Ground Thread
Features:
• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
PLUG / BOTTOMING CHAMFERS
Metric Hand Taps
NO. OF GRIND
TAP
PITCH
FLUTES LIMITS
SIZE
B
B-12
2
2
2.5
2.6
2.6
3
3
3.5
4.5
5
5.5
5.5
6
7
7
7
8
8
8
9
9
9
10
10
11
11
11
11
12
12
12
13
13
13
13
13
14
14
14
14
15
15
15
15
16
16
16
16
17
17
17
17
18
18
0.25
0.45
0.50
0.35
0.45
0.35
0.60
0.50
0.50
0.75
0.70
0.90
0.50
0.50
0.75
1.25
0.50
0.75
1.50
0.50
0.75
1.00
0.50
0.75
0.50
0.75
1.00
1.25
0.50
0.75
1.00
0.50
1.00
1.25
1.50
2.00
0.50
0.75
1.00
1.75
0.50
1.50
1.00
2.00
0.50
0.75
1.00
1.25
0.50
1.00
1.50
2.00
0.50
1.25
1 per pack
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
D3
D3
D3
D3
D3
D3
D4
D3
D3
D4
D4
D4
D3
D4
D5
D5
D4
D5
D6
D4
D5
D5
D4
D5
D4
D5
D5
D5
D4
D5
D5
D4
D5
D5
D6
D7
D4
D5
D5
D6
D4
D6
D5
D7
D4
D5
D5
D5
D4
D5
D6
D7
D4
D5
STOCK #
PLUG
BOTTOM
HSMTP72008
HSMTP72009
HSMTP72011
HSMTP72012
HSMTP72013
HSMTP72014
HSMTP72015
HSMTP72016
HSMTP72018
HSMTP72020
HSMTP72022
HSMTP72023
HSMTP72024
HSMTP72026
HSMTP72027
HSMTP72028
HSMTP72029
HSMTP72030
HSMTP72031
HSMTP72032
HSMTP72033
HSMTP72034
HSMTP72036
HSMTP72037
HSMTP72039
HSMTP72040
HSMTP72041
HSMTP72042
HSMTP72044
HSMTP72045
HSMTP72046
HSMTP72048
HSMTP72049
HSMTP72050
HSMTP72051
HSMTP72052
HSMTP72053
HSMTP72054
HSMTP72055
HSMTP72057
HSMTP72058
HSMTP72059
HSMTP72060
HSMTP72061
HSMTP72062
HSMTP72063
HSMTP72064
HSMTP72065
HSMTP72066
HSMTP72067
HSMTP72068
HSMTP72069
HSMTP72070
HSMTP72072
HSMTB72008
HSMTB72009
HSMTB72011
HSMTB72012
HSMTB72013
HSMTB72014
HSMTB72015
HSMTB72016
HSMTB72018
HSMTB72020
HSMTB72022
HSMTB72023
HSMTB72024
HSMTB72026
HSMTB72027
HSMTB72028
HSMTB72029
HSMTB72030
HSMTB72031
HSMTB72032
HSMTB72033
HSMTB72034
HSMTB72036
HSMTB72037
HSMTB72039
HSMTB72040
HSMTB72041
HSMTB72042
HSMTB72044
HSMTB72045
HSMTB72046
HSMTB72048
HSMTB72049
HSMTB72050
HSMTB72051
HSMTB72052
HSMTB72053
HSMTB72054
HSMTB72055
HSMTB72057
HSMTB72058
HSMTB72059
HSMTB72060
HSMTB72061
HSMTB72062
HSMTB72063
HSMTB72064
HSMTB72065
HSMTB72066
HSMTB72067
HSMTB72068
HSMTB72069
HSMTB72070
HSMTB72072
NO. OF GRIND
TAP
PITCH
FLUTES LIMITS
SIZE
18
19
19
19
19
20
21
21
21
21
22
22
23
23
23
23
23
24
25
25
25
25
26
26
27
27
28
28
30
30
30
32
33
34
35
38
39
40
42
42
42
45
45
45
48
48
48
48
50
50
52
52
52
1.75
0.50
1.00
1.50
2.00
1.25
1.00
1.50
2.00
2.50
1.00
2.00
1.00
1.50
2.00
2.50
3.00
1.00
1.00
1.50
2.00
3.00
1.50
2.00
1.00
2.50
1.50
2.00
1.00
2.50
3.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
3.00
4.50
1.50
3.00
4.50
1.50
3.00
4.50
5.00
1.50
3.00
1.50
3.00
5.00
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
8
6
6
6
8
6
8
6
6
D6
D4
D5
D6
D7
D5
D5
D6
D7
D7
D5
D7
D5
D6
D7
D7
D8
D5
D5
D6
D7
D8
D6
D7
D6
D8
D6
D7
D6
D8
D8
D6
D6
D6
D6
D6
D6
D6
D6
D8
D10
D6
D8
D10
D6
D8
D10
D10
D6
D8
D6
D8
D10
STOCK #
PLUG
BOTTOM
HSMTP72073
HSMTP72075
HSMTP72076
HSMTP72077
HSMTP72078
HSMTP72080
HSMTP72082
HSMTP72083
HSMTP72084
HSMTP72085
HSMTP72086
HSMTP72087
HSMTP72088
HSMTP72089
HSMTP72090
HSMTP72091
HSMTP72092
HSMTP72093
HSMTP72094
HSMTP72095
HSMTP72096
HSMTP72097
HSMTP72098
HSMTP72099
HSMTP72100
HSMTP72101
HSMTP72102
HSMTP72103
HSMTP72104
HSMTP72106
HSMTP72107
HSMTP72108
HSMTP72110
HSMTP72112
HSMTP72113
HSMTP72114
HSMTP72115
HSMTP72116
HSMTP72117
HSMTP72118
HSMTP72119
HSMTP72120
HSMTP72121
HSMTP72122
HSMTP72123
HSMTP72124
HSMTP72125
HSMTP72126
HSMTP72127
HSMTP72128
HSMTP72129
HSMTP72130
HSMTP72131
HSMTB72073
HSMTB72075
HSMTB72076
HSMTB72077
HSMTB72078
HSMTB72080
HSMTB72082
HSMTB72083
HSMTB72084
HSMTB72085
HSMTB72086
HSMTB72087
HSMTB72088
HSMTB72089
HSMTB72090
HSMTB72091
HSMTB72092
HSMTB72093
HSMTB72094
HSMTB72095
HSMTB72096
HSMTB72097
HSMTB72098
HSMTB72099
HSMTB72100
HSMTB72101
HSMTB72102
HSMTB72103
HSMTB72104
HSMTB72106
HSMTB72107
HSMTB72108
HSMTB72110
HSMTB72112
HSMTB72113
HSMTB72114
HSMTB72115
HSMTB72116
HSMTB72117
HSMTB72118
HSMTB72119
HSMTB72120
HSMTB72121
HSMTB72122
HSMTB72123
HSMTB72124
HSMTB72125
HSMTB72126
HSMTB72127
HSMTB72128
HSMTB72129
HSMTB72130
HSMTB72131
Hand Taps + .005 Oversize
High-Speed Steel
Ground Thread
Features:
• Produces threads with a pitch diameter
.005 larger than basic pitch diameter .
• Can be used by hand or under power,
in through or blind holes .
• Used primarily on parts to be plated
or heat treated after tapping, or
where loss of size is anticipated
for any reason .
Hand Taps - Oversize • Hand Taps - Eight Pitch
PLUG CHAMFER
TAP
SIZE
NO. OF
FLUTES
TPI
TAP
SIZE
STOCK
MACHINE SCREW SIZES
4
5
6
6
8
8
10
10
40
40
32
40
32
36
24
32
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
20
28
18
24
16
24
3
3
3
3
4
4
4
4
STOCK
FRACTIONAL
HTO71407
HTO71409
HTO71411
HTO71412
HTO71413
HTO71414
HTO71415
HTO71416
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
FRACTIONAL
4
4
4
4
4
4
NO. OF
FLUTES
TPI
HTO71430
HTO71431
HTO71432
HTO71433
HTO71434
HTO71435
14
20
13
20
12
18
11
18
10
16
9
14
8
12
14
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
HTO71436
HTO71437
HTO71438
HTO71439
HTO71440
HTO71441
HTO71442
HTO71443
HTO71446
HTO71447
HTO71448
HTO71449
HTO71450
HTO71451
HTO71452
4 to 1/4", 10 per pack, 5/16" to 1/2", 5 per pack
9/16" to 1", 3 per pack
B
Hand Taps - Eight Pitch
High-Speed Steel
Ground Thread
Features:
FRACTIONAL
• Special eight thread taps feature
eight threads per inch .
• Engineered specifically for liquid transmission
equipment found in oil fields .
STOCK #
TAP SIZE
X PITCH
NO. OF
FLUTES
GRIND
LIMITS
TAPER
PLUG
BOTTOM
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-3/4"
1-7/8"
2"
2-1/8"
2-1/4"
2-3/8"
2-1/2"
2-5/8"
2-3/4"
2-7/8"
3"
3-1/4"
3-1/2"
3-3/4"
4"
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
4
4
4
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
HTSPT71419
HTSPT71435
HTSPT71450
HTSPT71461
HTSPT71474
HTSPT71485
HTSPT71494
HTSPT71503
HTSPT71510
HTSPT71513
HTSPT71518
HTSPT71523
HTSPT71527
HTSPT71530
HTSPT71533
HTSPT71536
HTSPT71540
HTSPT71543
HTSPT71545
HTSPT71547
HTSPP71419
HTSPP71435
HTSPP71450
HTSPP71461
HTSPP71474
HTSPP71485
HTSPP71494
HTSPP71503
HTSPP71510
HTSPP71513
HTSPP71518
HTSPP71523
HTSPP71527
HTSPP71530
HTSPP71533
HTSPP71536
HTSPP71540
HTSPP71543
HTSPP71545
HTSPP71547
HTSPB71419
HTSPB71435
HTSPB71450
HTSPB71461
HTSPB71474
HTSPB71485
HTSPB71494
HTSPB71503
HTSPB71510
HTSPB71513
HTSPB71518
HTSPB71523
HTSPB71527
HTSPB71530
HTSPB71533
HTSPB71536
HTSPB71540
HTSPB71543
HTSPB71545
HTSPB71547
1 per pack
B-13
Left Hand Taps
High-Speed Steel
Ground Thread
Features:
• Specifically designed to cut threads with left hand rotation .
• Precision ground for a wide variety of applications .
PLUG CHAMFER
TAP
SIZE
TPI
NO. OF
FLUTES
GRIND
LIMITS
Expanded
STOCK #
TAPER
PLUG
BOTTOM
HTLP71111
HTLP71113
HTLP71115
HTLP71116
HTLB71111
HTLB71113
HTLB71115
HTLB71116
HTLP71120
HTLP71121
HTLP71122
HTLP71123
HTLP71124
HTLP71125
HTLP71126
HTLP71127
HTLP71128
HTLP71129
HTLP71130
HTLP71131
HTLP71132
HTLP71133
HTLP71134
HTLP71135
HTLP71136
HTLP71137
HTLP71138
HTLP71139
HTLP71140
HTLP71141
HTLP71142
HTLP71143
HTLP71144
HTLP71145
HTLP71146
HTLP71147
HTLP71148
HTLB71120
HTLB71121
HTLB71122
HTLB71123
HTLB71124
HTLB71125
HTLB71126
HTLB71127
HTLB71128
HTLB71129
HTLB71130
HTLB71131
HTLB71132
HTLB71133
HTLB71134
HTLB71135
HTLB71136
HTLB71137
HTLB71138
HTLB71139
HTLB71140
HTLB71141
HTLB71142
HTLB71143
HTLB71144
HTLB71145
HTLB71146
HTLB71147
HTLB71148
MACHINE SCREW SIZES
6
8
10
10
32
32
24
32
3
4
4
4
H3
H3
H3
H3
HTLT71111
HTLT71113
HTLT71115
HTLT71116
Left Hand Taps
FRACTIONAL
B
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
6 to 1/4", 10 per pack
5/16" to 1/2", 5 per pack
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
4
6
4
6
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
HTLT71120
HTLT71121
HTLT71122
HTLT71123
HTLT71124
HTLT71125
HTLT71126
HTLT71127
HTLT71128
HTLT71129
HTLT71130
HTLT71131
HTLT71132
HTLT71133
HTLT71134
HTLT71135
HTLT71136
HTLT71137
HTLT71138
HTLT71139
HTLT71140
HTLT71141
HTLT71142
HTLT71143
HTLT71144
HTLT71145
HTLT71146
HTLT71147
HTLT71148
9/16" to 1", 3 per pack
1-1/8" to 1-1/2", 1 per pack
*Please note stock numbers HSHTL71111 to HSHTL71147
from catalog 03G have been revised.
All taps available TiN coated. Details on request.
B-14
Metric Left Hand Taps
High-Speed Steel
Ground Thread
Features:
• Specifically designed to cut threads with left hand rotation .
• Precision ground for a wide variety of applications .
TAP
SIZE
PITCH
CLASS
OF FIT
NO. OF
FLUTES
Metric Left Hand Taps • Monolock Tap Bits
PLUG CHAMFER
NEW!
GRIND
LIMITS
STOCK #
D4
D4
D4
D4
D5
D5
D5
D5
D6
D5
D6
D5
D7
D6
D7
D6
D7
D6
D7
D6
D7
D6
D8
D7
HTLM81111
HTLM81113
HTLM81115
HTLM81116
HTLM81120
HTLM81123
HTLM81124
HTLM81125
HTLM81127
HTLM81128
HTLM81131
HTLM81133
HTLM81134
HTLM81135
HTLM81137
HTLM81138
HTLM81139
HTLM81142
HTLM81143
HTLM81144
HTLM81147
HTLM81148
HTLM81149
HTLM81150
METRIC
3.5
4
4.5
5
6
7
8
8
10
10
12
12
14
14
16
16
18
18
20
20
22
22
24
24
0.60
0.70
0.75
0.80
1.00
1.00
1.25
1.00
1.50
1.25
1.75
1.25
2.00
1.50
2.00
1.50
2.50
1.50
2.50
1.50
2.50
1.50
3.00
2.00
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
6H
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
3mm to 6mm, 10 per pack, 7mm to 12mm, 5 per pack
14mm to 24mm, 3 per pack
Tap Bits
High-Speed Steel
1/4" Power Shank
Use with Hex Shank Driving Tool
or Ratchet Handle Wrench .
MACHINE SCREW & FRACTIONAL SIZES
TAP SIZE
x TPI
NC / NF
OAL
STOCK #
6-32
8-32
10-24
1/4"-20
5/16"-18
3/8"-16
6-40
8-36
10-32
1/4"-28
5/16"-24
3/8"-24
NC
NC
NC
NC
NC
NC
NF
NF
NF
NF
NF
NF
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
HST70321
HST70322
HST70323
HST70324
HST70325
HST70326
HST70341
HST70342
HST70343
HST70344
HST70345
HST70346
1 per pack
• 1/4" hex shanks are designed for use in power tools with
quick change chucks and adapters . Also provides added
stability when used in standard drill chucks .
METRIC
TAP SIZE
x TPI
OAL
STOCK #
4-0.70
5-0.80
6-1.00
8-1.25
10-1.25
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
HST70351
HST70352
HST70353
HST70354
HST70355
1 per pack
B-15
Spiral Pointed Taps
Spiral Pointed Taps - Black Oxide
High-Speed Steel, Ground Thread
Right Hand Spiral, Bright Finish
High-Speed Steel, Ground Thread
Right Hand Spiral
Features:
Features:
• Specially designed for tapping deep through or blind
holes where chips may collect at the bottom of the hole .
• Prevents clogging by forcing chips ahead of tap .
• Suitable for tapping most materials, especially those
with high ductility .
• Also known as "gun taps" as chips are shot forward .
• Specially designed for tapping deep through or blind holes
where chips may collect at the bottom of the hole .
• For use in Oil Field, Pipe Line and Heat Exchanger Applications .
• Prevents clogging by forcing chips ahead of tap .
• Suitable for tapping most materials, especially those with
high ductility .
• Also known as "gun taps" as chips are shot forward .
Black oxide surface treatment
provides extra lubricity, increases
wear resistance and extends tool life.
Spiral Pointed Taps
PLUG CHAMFER
B
TAP
SIZE
TPI
NO. OF GRIND
FLUTES LIMITS
0
1
1
2
2
3
3
4
4
4
5
5
6
6
8
8
10
10
12
12
80
64
72
56
64
48
56
40
48
*36
40
44
32
40
32
36
24
32
24
28
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
9
14
8
12
*14
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Expanded
STOCK #
ALFA USA
ECO PRO
MACHINE SCREW SIZES
H1
H1
H1
H2
H2
H2
H2
H2
H2
H2
H2
H2
H3
H2
H3
H2
H3
H3
H3
H3
SPT170100
SPT170101
SPT170102
SPT170103
SPT170104
SPT170105
SPT170106
SPT170107
SPT170108
SPT170108A
SPT170109
SPT170110
SPT170111
SPT170112
SPT170113
SPT170114
SPT170115
SPT170116
SPT170117
SPT170118
SPT270100
SPT270101
SPT270102
SPT270103
SPT270104
SPT270105
SPT270106
SPT270107
SPT270108
SPT270108A
SPT270109
SPT270110
SPT270111
SPT270112
SPT270113
SPT270114
SPT270115
SPT270116
SPT270117
SPT270118
FRACTIONAL
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
SPT170128
SPT170129
SPT170130
SPT170131
SPT170132
SPT170133
SPT170134
SPT170135
SPT170136
SPT170137
SPT170138
SPT170139
SPT170140
SPT170141
SPT170142
SPT170143
SPT170144
SPT170145
SPT170146
SPT170147
SPT170148
0 to 1/4", 12 per pack, 5/16" to 1/2", 6 per pack,
9/16" to 3/4", 3 per pack, 7/8" to 1", 1 per pack
• ALFA USA taps are made
in the United States .
B-16
NOT RECOMMENDED FOR NON-FERROUS MATERIALS.
SPT270128
SPT270129
SPT270130
SPT270131
SPT270132
SPT270133
SPT270134
SPT270135
SPT270136
SPT270137
SPT270138
SPT270139
SPT270140
SPT270141
SPT270142
SPT270143
SPT270144
SPT270145
SPT270146
SPT270147
SPT270148
*UNS
• ECO PRO taps are
made in Europe .
PLUG CHAMFER
TAP
SIZE
TPI
0
1
1
2
2
3
3
4
4
4
5
5
6
6
8
8
10
10
12
12
80
64
72
56
64
48
56
40
48
*36
40
44
32
40
32
36
24
32
24
28
NO. OF
FLUTES
GRIND
LIMITS
Expanded
STOCK #
ALFA USA
MACHINE SCREW SIZES
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
H1
H1
H1
H2
H2
H2
H2
H2
H2
H2
H2
H2
H3
H2
H3
H2
H3
H3
H3
H3
SPTB170100
SPTB170101
SPTB170102
SPTB170103
SPTB170104
SPTB170105
SPTB170106
SPTB170107
SPTB170108
SPTB170108A
SPTB170109
SPTB170110
SPTB170111
SPTB170112
SPTB170113
SPTB170114
SPTB170115
SPTB170116
SPTB170117
SPTB170118
FRACTIONAL
1/4"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
20
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
2
3
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
0 to 1/4", 12 per pack, 5/16" to 1/2", 6 per pack,
9/16" to 3/4", 3 per pack
SPTB170128
SPTB170129
SPTB170130
SPTB170131
SPTB170132
SPTB170133
SPTB170134
SPTB170135
SPTB170136
SPTB170137
SPTB170138
SPTB170139
SPTB170140
SPTB170141
SPTB170142
SPTB170143
SPTB170144
*UNS
Spiral Pointed Taps - Cont.
High-Speed Steel, Ground Thread
Right Hand Spiral
SPIRAL POINTED TAPS
+ .005 OVERSIZE
METRIC SPIRAL POINTED TAPS
Features: • Produces threads with a pitch diameter .005 larger
than basic pitch diameter .
• Used on parts to be plated or heat treated after
tapping, or where loss of size is anticipated .
Features:
• Specially designed for tapping deep through or blind
holes where chips may collect at the bottom of the hole .
• Prevents clogging by forcing chips ahead of tap .
• Suitable for tapping most materials, especially those
with high ductility .
• Also known as "gun taps" as chips are shot forward .
PLUG CHAMFER
TAP
SIZE
NO. OF
FLUTES
TPI
STOCK #
MACHINE SCREW SIZES
PLUG CHAMFER
1.6
1.8
2
2.2
2.5
3
3.5
4
4.5
5
6
6.3
7
8
8
10
10
12
12
14
14
16
16
18
20
20
0.35
0.35
0.40
0.45
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.00
1.25
1.00
1.50
1.25
1.75
1.25
2.00
1.50
2.00
1.50
2.50
2.50
2.50
3
3
3
3
3
3
4
4
4
4
5
5
5
5
5
6
5
6
5
7
6
7
6
7
7
6
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
3
4
5/16
3/8
7/16
7/16
1/2
5/8
11/16
3/4
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-21/32
1-21/32
1-21/32
1-21/32
1-13/16
1-13/16
1-13/16
2
2
STOCK #
ALFA USA
SPTM170151
SPTM170152
SPTM170153
SPTM170154
SPTM170155
SPTM170156
SPTM170157
SPTM170158
SPTM170159
SPTM170160
SPTM170161
–
SPTM170163
SPTM170164
SPTM170165
SPTM170166
SPTM170167
SPTM170168
SPTM170169
SPTM170170
SPTM170171
SPTM170172
SPTM170173
SPTM170174
SPTM170175
–
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
20
28
18
24
16
24
14
13
20
SPTM270151
SPTM270152
SPTM270153
SPTM270154
SPTM270155
SPTM270156
SPTM270157
SPTM270158
SPTM270159
SPTM270160
SPTM270161
SPTM270162
SPTM270163
SPTM270164
SPTM270165
SPTM270166
SPTM270167
SPTM270168
SPTM270169
SPTM270170
SPTM270171
SPTM270172
SPTM270173
SPTM270174
SPTM270175
SPTM270176
• ECO PRO taps are
made in Europe .
2
2
2
2
SPTO71511
SPTO71513
SPTO71515
SPTO71516
FRACTIONAL
ECO PRO
1 .6mm to 6mm, 12 per pack,
7mm to 12mm, 6 per pack, 14mm to 20mm, 3 per pack
• ALFA USA taps are made
in the United States .
32
32
24
32
2
2
2
2
3
3
3
3
3
Spiral Pointed Taps
TAP PITCH
D
NO. OF THREAD
SIZE
LIMIT FLUTES LENGTH
6
8
10
10
SPTO71528
SPTO71529
SPTO71530
SPTO71531
SPTO71532
SPTO71533
SPTO71534
SPTO71536
SPTO71537
5 per pack
SPIRAL POINTED TAPS
TITANIUM NITRIDE COATED
B
Features: • Titanium Nitride coating provides greater surface
hardness and lubricity to promote longer tap life .
• Provides higher tapping speeds .
PLUG CHAMFER
TAP
SIZE
TPI
4
6
8
10
10
12
40
32
32
24
32
24
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
20
28
18
24
16
24
14
20
13
20
11
18
10
16
NO. OF
FLUTES
GRIND
LIMITS
Expanded
STOCK #
ALFA USA
MACHINE SCREW SIZES
2
2
2
2
2
2
H2
H3
H3
H3
H3
H3
SPT170107TN
SPT170111TN
SPT170113TN
SPT170115TN
SPT170116TN
SPT170117TN
FRACTIONAL
1 per pack
2
2
2
2
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
SPT170128TN
SPT170129TN
SPT170130TN
SPT170131TN
SPT170132TN
SPT170133TN
SPT170134TN
SPT170135TN
SPT170136TN
SPT170137TN
SPT170140TN
SPT170141TN
SPT170142TN
SPT170143TN
B-17
Spiral Fluted Taps
High-Speed Steel
Ground Thread
Features:
• Spiral fluted taps draw chips out of a tapped hole, thereby preventing clogging
and recutting of chips .
• Will bridge a keyway or other slot inside a hole without binding .
• Can be used for tapping most materials, especially mild steel, aluminum,
magnesium, copper and brass in blind holes .
Fast Spiral
Chamfer: Plug (3 to 5 threads) Bottoming (1 to 2 threads)
PLUG CHAMFER
TAP
SIZE
TPI
3
3
4
4
5
5
6
6
8
8
10
10
12
12
48
56
40
48
40
44
32
40
32
36
24
32
24
28
NO. OF
FLUTES
BOTTOMING CHAMFER
STOCK #
TAP
SIZE
TPI
SFTP170905
SFTP170906
SFTP170907
SFTP170908
SFTP170909
SFTP170910
SFTP170911
SFTP170912
SFTP170913
SFTP170914
SFTP170915
SFTP170916
SFTP170917
SFTP170918
3
3
4
4
5
5
6
6
8
8
10
10
12
12
48
56
40
48
40
44
32
40
32
36
24
32
24
28
GRIND
LIMITS
Spiral Fluted Taps
MACHINE SCREW SIZES
B
2
2
2
2
2
2
2
2
2-3
2-3
2-3
2-3
2-3
2-3
H2
H2
H2
H2
H2
H2
H3
H2
H3
H3
H3
H3
H3
H3
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
2-3
2-3
3
3
3
3
3-4
3-4
3-4
3-4
3-4
3-4
3-4
3-4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
3 to 1/4", 12 per pack, 5/16" to 1/2", 6 per pack
9/16" to 3/4", 3 per pack
B-18
GRIND
LIMITS
STOCK #
MACHINE SCREW SIZES
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
NO. OF
FLUTES
2
2
2
2
2
2
2
2
2-3
2-3
2-3
2-3
2-3
2-3
H2
H2
H2
H2
H2
H2
H3
H2
H3
H3
H3
H3
H3
H3
SFTB170905
SFTB170906
SFTB170907
SFTB170908
SFTB170909
SFTB170910
SFTB170911
SFTB170912
SFTB170913
SFTB170914
SFTB170915
SFTB170916
SFTB170917
SFTB170918
FRACTIONAL
SFTP170930
SFTP170931
SFTP170932
SFTP170933
SFTP170934
SFTP170935
SFTP170936
SFTP170937
SFTP170938
SFTP170939
SFTP170940
SFTP170941
SFTP170942
SFTP170943
SFTP170946
SFTP170947
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
2-3
2-3
3
3
3
3
3-4
3-4
3-4
3-4
3-4
3-4
3-4
3-4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
3 to 1/4", 12 per pack, 5/16" to 1/2", 6 per pack
9/16" to 3/4", 3 per pack
SFTB170930
SFTB170931
SFTB170932
SFTB170933
SFTB170934
SFTB170935
SFTB170936
SFTB170937
SFTB170938
SFTB170939
SFTB170940
SFTB170941
SFTB170942
SFTB170943
SFTB170946
SFTB170947
Thread Forming Taps
Pulley Taps
High-Speed Steel
Ground Thread
High-Speed Steel
Ground Thread
Features:
Features:
• Very effective in ductile materials
such as aluminum, brass,
stainless steel, copper, zinc, cast
steel and alloy steel materials .
• Specially designed to tap the set screw
thread in pulley hubs .
• Also used as extension taps in many applications .
• Available in 6", 8", 10" & 12" overall lengths .
PLUG CHAMFER BOTTOMING CHAMFER
TAP
SIZE
TPI
0
1
1
2
2
3
3
4
4
5
5
6
6
8
8
10
10
12
12
80
64
72
56
64
48
56
40
48
40
44
32
40
32
36
24
32
24
28
GRIND
LIMITS
CLASS
OF FIT
STOCK #
PLUG
BOTTOM
PLUG CHAMFER
TPI
6
8
10
10
32
32
24
32
2B
3B
3B
3B
3B
3B
3B
3B
3B
3B
3B
3B
3B
3B
3B
2B
2B
3B
3B
–
–
–
–
–
–
–
TFP71707
TFP71708
TFP71709
TFP71710
TFP71711
TFP71712
TFP71713
TFP71714
TFP71715
TFP71716
TFP71717
TFP71718
6
6
6
6
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
1"
3/8"
1/2"
5/8"
5/8"
3/4"
3/4"
1"
1/2"
5/8"
5/8"
3/4"
1"
20
28
18
24
16
24
14
20
13
20
11
18
20
28
18
24
16
24
14
13
20
11
18
10
8
16
13
11
18
10
16
8
13
11
18
10
8
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
12
12
12
12
12
TFB81700
TFB81701
TFB81702
TFB81703
TFB81704
TFB81705
TFB81706
TFB81707
TFB81708
TFB81709
TFB81710
TFB81711
TFB81712
TFB81713
TFB81714
TFB81715
TFB81716
TFB81717
TFB81718
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
H6
H5
H6
H6
H7
H6
H6
H5
H8
H5
H6
H5
H8
H6
H8
H6
2B
2B
2B
2B
2B
2B
3B
3B
2B
3B
3B
3B
2B
3B
2B
3B
TFP71719
TFP71720
TFP71721
TFP71722
TFP71723
TFP71724
TFP71725
TFP71726
TFP71727
TFP71728
TFP71729
TFP71730
TFP71731
TFP71732
TFP71733
TFP71734
GRIND
LIMITS
STOCK #
MACHINE SCREW SIZES
MACHINE SCREW SIZES
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H3
H4
H4
H4
H4
H5
H5
H4
H4
OVERALL NO. OF
LENGTH FLUTES
TAP
SIZE
TFB81719
TFB81720
TFB81721
TFB81722
TFB81723
TFB81724
TFB81725
TFB81726
TFB81727
TFB81728
TFB81729
TFB81730
TFB81731
TFB81732
TFB81733
TFB81734
1 per pack
Nut Taps
High-Speed Steel
Ground Thread
3
4
4
4
3
3
3
3
HSPUT70201
HSPUT70202
HSPUT70203
HSPUT70204
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
HSPUT70205
HSPUT70206
HSPUT70207
HSPUT70208
HSPUT70209
HSPUT70210
HSPUT70211
HSPUT70212
HSPUT70213
HSPUT70214
HSPUT70215
HSPUT70216
HSPUT70230
HSPUT70231
HSPUT70232
HSPUT70233
HSPUT70234
HSPUT70235
HSPUT70236
HSPUT70238
HSPUT70239
HSPUT70240
HSPUT70241
HSPUT70242
HSPUT70243
HSPUT70250
HSPUT70254
HSPUT70256
HSPUT70257
HSPUT70258
HSPUT70259
HSPUT70260
HSPUT70270
HSPUT70272
HSPUT70273
HSPUT70274
HSPUT70276
FRACTIONAL
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Thread Forming Taps • Pulley Taps • Nut Taps
For internal
threading in
ductile materials
B
1 per pack
NEW!
Features:
• Nut taps have long thread length, long chamfers & longer shanks .
• Long chamfers assist in centering the hole .
• May also be used to reach holes that would not be accessible
with regular length taps .
TAP
SIZE
TPI
1/4"
5/16"
3/8"
1/2"
20
18
16
13
GRIND NO. OF
LIMITS FLUTES
H3
H3
H3
H3
4
4
4
4
THREAD OVERALL
LENGTH LENGTH
STOCK #
1-5/8"
1-13/16"
2"
2-1/2"
NT30230
NT30232
NT30234
NT30238
5
5-1/2
6
7
1 per pack
B-19
Pipe Taps
High-Speed Steel
Ground Thread
TAPER PIPE TAPS, NPT
Features:
TAPER PIPE TAPS, NPTF (Dry Seal)
Features: • Dry Seal Taps are used to tap fittings which give
• Used for tapping pipe and pipe fittings .
a pressure tight joint without the use of a sealer .
• Used where sealing compounds may fail due to
high heat or high fluid and gas pressures .
• Suitable for carbon steels, leaded steels and
die-cast parts .
Pipe Taps
• Designed to produce threads where mated parts
are not required to withstand high fluid and
gas pressures, and where the use of a sealing
compound or tape may be used to produce
leakproof threads .
B
TAP
SIZE
(PIPE)
TPI
1/16"
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
27
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
8
8
8
8
THREAD NO. OF
LENGTH FLUTES
11/16"
3/4"
1-1/16"
1-1/16"
1-3/8"
1-3/8"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
4
4
4
4
4
5
5
5
7
7
8
8
8
8
STOCK #
TAP
SIZE
ALFA USA
ECO PRO
HSNPT170301
HSNPT170302
HSNPT170303
HSNPT170304
HSNPT170305
HSNPT170306
HSNPT170307
HSNPT170308
HSNPT170309
HSNPT170310
—
—
—
—
HSNPT270301
HSNPT270302
HSNPT270303
HSNPT270304
HSNPT270305
HSNPT270306
HSNPT270307
HSNPT270308
HSNPT270309
HSNPT270310
HSNPT270311
HSNPT270312
HSNPT270313
HSNPT270314
TPI
1/16"
27
1/8"
27
1/4"
18
3/8"
18
1/2"
14
3/4"
14
1"
11-1/2
1-1/4" 11-1/2
STOCK #
THREAD NO. OF
LENGTH FLUTES
11/16"
3/4"
1-1/16"
1-1/16"
1-3/8"
1-3/8"
1-3/4"
1-3/4"
4
4
4
4
4
5
5
5
ALFA USA
ECO PRO
HSNPT180321
HSNPT180322
HSNPT180323
HSNPT180324
HSNPT180325
HSNPT180326
HSNPT180327
HSNPT180328
HSNPT280321
HSNPT280322
HSNPT280323
HSNPT280324
HSNPT280325
HSNPT280326
HSNPT280327
HSNPT280328
1 per pack
1 per pack
Straight & Taper
U .K .
TAPER PIPE TAPS, INTERRUPTED
Features:
• Suitable for threading both ferrous and nonferrous materials
where chip disposal is a problem .
• The interrupted threads reduce drag while taper pipe threading .
• These pipe taps are standard, having an odd number of flutes .
TAP
SIZE
TPI
1/16"
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
27
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
NO. OF OVERALL LENGTH
FLUTES LENGTH OF THREAD
5
5
5
5
5
5
5
5
7
7
2-1/8"
2-1/8"
2-7/16"
2-9/16"
3-1/8"
3-1/4"
3-3/4"
4"
4"
4-1/2"
11/16"
3/4"
1-1/16"
1-1/16"
1-3/8"
1-3/8"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
STOCK #
ALFA USA
ECO PRO
HSNPT76701
HSNPT76702
HSNPT76703
HSNPT76704
HSNPT76705
HSNPT76706
HSNPT76707
HSNPT76708
HSNPT76709
HSNPT76710
HSNPT26701
HSNPT26702
HSNPT26703
HSNPT26704
HSNPT26705
HSNPT26706
HSNPT26707
—
—
—
1 per pack
Features:
• ECO PRO taps are
made in Europe .
• Suitable for tapping holes or couplings
for low pressure work .
• A sealant must be used to ensure a
pressure-tight joint .
TAP
SIZE
TPI
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
28
19
19
14
14
11
11
11
11
1 per pack
• ALFA USA taps are made
in the United States .
B-20
BSP BRITISH STANDARD
PIPE TAPS
STOCK #
BSPP STRAIGHT
BSPT TAPER
BSPP70452
BSPP70453
BSPP70454
BSPP70455
BSPP70456
BSPP70457
BSPP70458
BSPP70459
BSPP70460
BSPT70342
BSPT70343
BSPT70344
BSPT70345
BSPT70346
BSPT70347
BSPT70348
BSPT70349
BSPT70350
Pipe Reamers
High-Speed Steel
High-Speed Steel
STRAIGHT PIPE TAPS, NPS
Features:
• Suitable for tapping holes or couplings for low
pressure work .
• Suitable for assembly with taper threaded pipe or
fittings to secure tight joints when sealer is used .
TAPER PIPE REAMERS
Features:
• 3/4" taper per foot .
• For reaming holes to be tapped with taper pipe taps .
TAP
SIZE
TPI
THREAD
LENGTH
NO. OF
FLUTES
STOCK #
ALFA USA
NPT
SIZE
SMALL
DIA.
1/16"
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
27
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
11/16"
3/4"
1-1/16"
1-1/16"
1-3/8"
1-3/8"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
4
4
4
4
4
5
5
5
7
7
HSNPS172321
HSNPS172323
HSNPS172324
HSNPS172325
HSNPS172326
HSNPS172327
HSNPS172328
HSNPS172329
HSNPS172330
HSNPS172331
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
.316
.406
.540
.665
.876
1 .103
1 .444
1 .684
2 .159
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
.316
.406
.540
.665
.876
1 .103
1 .444
1 .684
2 .159
LARGE
DIA.
OVERALL
LENGTH
STOCK #
STRAIGHT FLUTE
1 per pack
.362
.472
.606
.751
.962
1 .212
1 .553
1 .793
2 .268
2-1/8"
2-7/16"
2-9/16"
3-1/8"
3-1/4"
3-3/4"
4"
4-1/4"
4-1/2"
HSPR70341
HSPR70342
HSPR70343
HSPR70344
HSPR70345
HSPR70346
HSPR70347
HSPR70348
HSPR70349
SPIRAL FLUTE
.362
.472
.606
.751
.962
1 .212
1 .553
1 .793
2 .268
2-1/8"
2-7/16"
2-9/16"
3-1/8"
3-1/4"
3-3/4"
4"
4-1/4"
4-1/2"
HSPR70351
HSPR70352
HSPR70353
HSPR70354
HSPR70355
HSPR70356
HSPR70357
HSPR70358
HSPR70359
Pipe Taps • Pipe Reamers • Rethreading Taps • Acme Taps
Pipe Taps - Cont.
B
1 per pack
Rethreading Taps
Acme Taps
Carbon Steel
High-Speed Steel
Ground Thread
• Restores internal threads
without undercutting .
THREAD SIZE
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
-
20
28
18
24
16
24
14
20
13
20
12
18
STOCK #
RTT70761
RTT70762
RTT70763
RTT70764
RTT70765
RTT70766
RTT70767
RTT70768
RTT70769
RTT70770
RTT70771
RTT70772
1 per pack
RETHREADING TAP SET
NO. OF
PIECES
DESCRIPTION
STOCK #
4 pc.
1 each sizes:
1/4" - 20; 5/16" - 18;
3/8" - 16; 1/2" - 13
RTT70775
Tandem Style, Single Pass
Features:
• Combines roughing and finishing operations
in one pass for more economical production runs .
• No leadscrew required .
• Thread pitches are generally coarse relative
to the diameter .
SIZE
FLUTE
LENGTH
OVERALL
LENGTH
STOCK #
1/2" - 10
5/8" - 8
3/4" - 6
7/8" - 6
1" - 5
1-3/8" - 4
1-1/2" - 4
2-9/16"
3-3/16"
4-5/16"
4-3/8"
5-1/4"
5-7/8"
5-7/8"
5"
6-1/4"
7-15/16"
8-5/8"
10-1/8"
12-1/4"
12-5/8"
AT66571
AT66572
AT66573
AT66574
AT66575
AT66578
AT66579
1 per pack
1 per pack
B-21
Round Adjustable Dies
• Used for cutting external right hand threads .
• Ideal for precision threading with die adjustment made by set screws .
• Adjustment dies allow the user to under or over cut their threads .
• For threading where a high-speed steel round adjustable die is desired
for improved wear life .
High-Speed Steel
Standard Thread
TAP
SIZE
TPI
NC, NF,
NS
13/16" O.D.
1" O.D.
0
1
1
2
2
3
3
4
4
5
5
6
6
8
8
10
10
12
12
80
64
72
56
64
48
56
40
48
40
44
32
40
32
36
24
32
24
28
HSRD90391
HSRD90392
HSRD90393
HSRD90394
HSRD90395
HSRD90396
HSRD90397
HSRD90398
HSRD90399
HSRD90400
HSRD90401
HSRD90402
HSRD90403
HSRD90404
HSRD90405
HSRD90406
HSRD90407
HSRD90408
HSRD90409
–
–
–
–
–
–
–
HSRD90414
HSRD90415
HSRD90416
–
HSRD90417
HSRD90418
HSRD90419
HSRD90420
HSRD90421
HSRD90422
HSRD90423
HSRD90424
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
11/16"
11/16"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
2"
2"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
11
16
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
5
12
4-1/2
12
HSRD90410
HSRD90411
HSRD90412
HSRD90413
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90425
HSRD90426
HSRD90427
HSRD90428
HSRD90429
HSRD90430
HSRD90431
HSRD90432
HSRD90433
HSRD90434
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90435
HSRD90436
HSRD90437
HSRD90438
HSRD90439
HSRD90440
HSRD90441
HSRD90442
HSRD90443
HSRD90444
HSRD90445
HSRD90446
HSRD90447
HSRD90448
HSRD90449
HSRD90450
HSRD90451
HSRD90452
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1/16"
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
27
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
–
–
–
–
–
–
–
–
–
–
HSRD90499
HSRD90500
–
–
–
–
–
–
–
–
Expanded
STOCK #
1-1/2" O.D.
2" O.D.
2-1/2" O.D.
3" O.D.
4" O.D.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90453
HSRD90454
HSRD90455
HSRD90456
HSRD90457
HSRD90458
HSRD90459
HSRD90460
HSRD90461
HSRD90462
HSRD90463
HSRD90464
HSRD90465
HSRD90466
HSRD90467
HSRD90468
HSRD90469
HSRD90470
HSRD90471
HSRD90472
HSRD90473
HSRD90474
HSRD90475
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90476
HSRD90477
HSRD90478
HSRD90479
HSRD90480
HSRD90481
HSRD90482
HSRD90483
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90484
HSRD90485
HSRD90486
HSRD90487
HSRD90488
HSRD90489
HSRD90490
HSRD90491
HSRD90492
HSRD90493
HSRD90494
HSRD90495
HSRD90496
HSRD90497
HSRD90498
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90504
HSRD90505
HSRD90506
HSRD90507
–
–
–
–
–
–
–
–
–
–
HSRD90508
–
–
–
–
–
–
–
–
–
–
HSRD90509
HSRD90510
–
–
–
–
–
–
–
–
–
HSRD90511
HSRD90512
Round Adjustable Dies
MACHINE SCREW SIZES
FRACTIONAL
B
NPT SIZES
1 per pack
B-22
–
HSRD90501
HSRD90502
HSRD90503
–
–
–
–
–
–
Note: Stock numbers have been changed from previous publication .
Round Adjustable Dies - Metric
High-Speed Steel
Standard Thread
METRIC SIZES
Expanded
TAP
SIZE
TPI
NC, NF,
NS
13/16" O.D.
1" O.D.
1-1/2" O.D.
2" O.D.
2-1/2" O.D.
3" O.D.
1
1.6
2
2.2
2.3
2.5
2.6
3
3.5
4
4
4.5
5
6
6.3
7
8
8
10
10
12
12
14
14
16
18
18
20
20
22
22
24
24
27
27
30
33
45
0.25
0.35
0.40
0.45
0.40
0.45
0.45
0.50
0.60
0.50
0.70
0.75
0.80
1.00
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
1.50
2.00
2.00
1.50
2.50
1.50
2.50
1.50
2.50
2.00
3.00
2.00
3.00
3.50
2.00
4.50
HSRD90513
HSRD90514
HSRD90515
–
–
HSRD90516
–
HSRD90517
HSRD90518
HSRD90519
HSRD90520
–
HSRD90521
HSRD90522
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90523
HSRD90524
HSRD90525
HSRD90526
HSRD90527
HSRD90528
HSRD90529
–
HSRD90530
HSRD90531
HSRD90532
HSRD90533
HSRD90534
HSRD90535
HSRD90536
HSRD90537
HSRD90538
HSRD90539
–
HSRD90540
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90541
HSRD90542
HSRD90543
HSRD90544
HSRD90545
HSRD90546
HSRD90547
HSRD90548
HSRD90549
HSRD90550
HSRD90551
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90552
HSRD90553
HSRD90554
HSRD90555
HSRD90556
HSRD90557
HSRD90558
HSRD90559
HSRD90560
HSRD90561
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90562
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
HSRD90563
Round Adjustable Dies - Metric
1 per pack
STOCK #
B
Note: Stock numbers have been changed from previous publication .
B-23
Round Adj. Dies - Special Thread
High-Speed Steel
Features: • Provides improved wear life .
• Ideal for precision threading with adjustment of die by set screws .
• Allows the user to under or over cut threads .
INCH SIZES – MACHINE SCREW & FRACTIONAL
SIZE
STOCK #
Round Adjustable Dies - Special Thread
1" O.D.
B
B-24
4-36
4-56
4-60
4-64
5-48
5-56
5-64
6-30
6-36
6-48
6-56
8-24
8-30
8-40
8-48
8-56
10-26
10-27
10-28
10-30
10-36
10-40
10-48
10-56
12-26
12-27
12-30
12-32
12-36
12-40
12-48
12-56
14-27
14-28
14-30
14-32
14-48
1/4-14
1/4-16
1/4-18
1/4-22
1/4-24
1/4-26
1/4-27
1/4-30
1/4-32
1/4-36
1/4-40
1/4-48
1/4-56
5/16-16
5/16-20
5/16-22
5/16-27
5/16-28
RDSP74710
RDSP74711
RDSP74712
RDSP74713
RDSP74714
RDSP74715
RDSP74716
RDSP74717
RDSP74718
RDSP74719
RDSP74720
RDSP74721
RDSP74722
RDSP74723
RDSP74724
RDSP74725
RDSP74726
RDSP74727
RDSP74728
RDSP74729
RDSP74730
RDSP74731
RDSP74732
RDSP74733
RDSP74734
RDSP74735
RDSP74736
RDSP74737
RDSP74738
RDSP74739
RDSP74740
RDSP74741
RDSP74742
RDSP74743
RDSP74744
RDSP74745
RDSP74746
RDSP74747
RDSP74748
RDSP74749
RDSP74750
RDSP74751
RDSP74752
RDSP74753
RDSP74754
RDSP74755
RDSP74756
RDSP74757
RDSP74758
RDSP74759
RDSP74760
RDSP74761
RDSP74762
RDSP74763
RDSP74764
SIZE
STOCK #
1" O.D.
5/16-30
5/16-32
5/16-36
5/16-40
5/16-48
3/8-14
3/8-18
3/8-20
3/8-22
3/8-26
3/8-27
3/8-28
3/8-30
3/8-32
3/8-36
3/8-40
3/8-48
7/16-16
7/16-18
7/16-24
7/16-27
7/16-28
7/16-30
7/16-32
7/16-36
7/16-40
1/2-12
1/2-14
1/2-16
1/2-18
1/2-22
1/2-24
1/2-27
1/2-28
1/2-30
1/2-32
1/2-36
1/2-40
1/2-48
RDSP74765
RDSP74766
RDSP74767
RDSP74768
RDSP74769
RDSP74770
RDSP74771
RDSP74772
RDSP74773
RDSP74774
RDSP74775
RDSP74776
RDSP74777
RDSP74778
RDSP74779
RDSP74780
RDSP74781
RDSP74782
RDSP74783
RDSP74784
RDSP74785
RDSP74786
RDSP74787
RDSP74788
RDSP74789
RDSP74790
RDSP74791
RDSP74792
RDSP74793
RDSP74794
RDSP74795
RDSP74796
RDSP74797
RDSP74798
RDSP74799
RDSP74800
RDSP74801
RDSP74802
RDSP74803
SIZE
STOCK #
1-1/2" O.D.
1/4-22
1/4-24
1/4-27
1/4-30
1/4-32
1/4-36
1/4-40
1/4-48
5/16-16
5/16-20
5/16-22
5/16-27
5/16-28
5/16-30
5/16-32
5/16-36
5/16-40
5/16-48
3/8-14
3/8-18
3/8-20
3/8-22
3/8-26
3/8-27
3/8-28
3/8-30
3/8-32
3/8-36
3/8-40
3/8-48
7/16-12
7/16-16
7/16-18
7/16-22
7/16-24
7/16-27
7/16-28
7/16-30
7/16-32
7/16-36
7/16-40
7/16-48
15/32-32
1/2-12
1/2-14
1/2-16
1/2-18
1/2-22
1/2-24
1/2-27
1/2-28
1/2-30
1/2-32
1/2-36
1/2-40
RDSP74810
RDSP74811
RDSP74812
RDSP74813
RDSP74814
RDSP74815
RDSP74816
RDSP74817
RDSP74818
RDSP74819
RDSP74820
RDSP74821
RDSP74822
RDSP74823
RDSP74824
RDSP74825
RDSP74826
RDSP74827
RDSP74828
RDSP74829
RDSP74830
RDSP74831
RDSP74832
RDSP74833
RDSP74834
RDSP74835
RDSP74836
RDSP74837
RDSP74838
RDSP74839
RDSP74840
RDSP74841
RDSP74842
RDSP74843
RDSP74844
RDSP74845
RDSP74846
RDSP74847
RDSP74848
RDSP74849
RDSP74850
RDSP74851
RDSP74852
RDSP74853
RDSP74854
RDSP74855
RDSP74856
RDSP74857
RDSP74858
RDSP74859
RDSP74860
RDSP74861
RDSP74862
RDSP74863
RDSP74864
SIZE
STOCK #
1-1/2" O.D.
1/2-48
1/2-56
9/16-14
9/16-16
9/16-20
9/16-22
9/16-24
9/16-27
9/16-28
9/16-30
9/16-32
9/16-36
9/16-40
5/8-10
5/8-12
5/8-14
5/8-16
5/8-20
5/8-22
5/8-24
5/8-26
5/8-27
5/8-28
5/8-30
5/8-32
5/8-36
5/8-40
5/8-48
11/16-12
11/16-14
11/16-18
11/16-20
11/16-24
11/16-27
11/16-30
11/16-32
3/4-12
3/4-14
3/4-18
3/4-20
3/4-24
3/4-27
3/4-28
3/4-30
3/4-32
3/4-36
3/4-40
3/4-48
13/16-10
13/16-12
13/16-16
13/16-20
13/16-24
13/16-28
13/16-32
RDSP74865
RDSP74866
RDSP74867
RDSP74868
RDSP74869
RDSP74870
RDSP74871
RDSP74872
RDSP74873
RDSP74874
RDSP74875
RDSP74876
RDSP74877
RDSP74878
RDSP74879
RDSP74880
RDSP74881
RDSP74882
RDSP74883
RDSP74884
RDSP74885
RDSP74886
RDSP74887
RDSP74888
RDSP74889
RDSP74890
RDSP74891
RDSP74892
RDSP74893
RDSP74894
RDSP74895
RDSP74896
RDSP74897
RDSP74898
RDSP74899
RDSP75000
RDSP75001
RDSP75002
RDSP75003
RDSP75004
RDSP75005
RDSP75006
RDSP75007
RDSP75008
RDSP75009
RDSP75010
RDSP75011
RDSP75012
RDSP75013
RDSP75014
RDSP75015
RDSP75016
RDSP75017
RDSP75018
RDSP75019
SIZE
STOCK #
2" O.D.
7/16-18
7/16-24
1/2-12
1/2-16
1/2-18
1/2-24
1/2-27
1/2-28
1/2-30
1/2-32
9/16-14
9/16-20
9/16-24
9/16-27
9/16-28
9/16-30
9/16-32
9/16-36
5/8-10
5/8-12
5/8-14
5/8-16
5/8-20
5/8-24
5/8-27
5/8-28
5/8-30
5/8-32
5/8-40
11/16-12
11/16-14
11/16-18
11/16-20
11/16-24
11/16-27
11/16-32
11/16-36
11/16-40
3/4-12
3/4-14
3/4-18
3/4-20
3/4-24
3/4-27
3/4-28
3/4-32
3/4-36
3/4-40
13/16-10
13/16-12
13/16-14
13/16-16
RDSP75030
RDSP75031
RDSP75032
RDSP75033
RDSP75034
RDSP75035
RDSP75036
RDSP75037
RDSP75038
RDSP75039
RDSP75040
RDSP75041
RDSP75042
RDSP75043
RDSP75044
RDSP75045
RDSP75046
RDSP75047
RDSP75048
RDSP75049
RDSP75050
RDSP75051
RDSP75052
RDSP75053
RDSP75054
RDSP75055
RDSP75056
RDSP75057
RDSP75058
RDSP75059
RDSP75060
RDSP75061
RDSP75062
RDSP75063
RDSP75064
RDSP75065
RDSP75066
RDSP75067
RDSP75068
RDSP75069
RDSP75070
RDSP75071
RDSP75072
RDSP75073
RDSP75074
RDSP75075
RDSP75076
RDSP75077
RDSP75078
RDSP75079
RDSP75080
RDSP75081
Continued
Round Adj. Dies - Special Thread - Cont.
High-Speed Steel
INCH SIZES – MACHINE SCREW & FRACTIONAL
SIZE
STOCK #
2" O.D.
RDSP75082
RDSP75083
RDSP75084
RDSP75085
RDSP75086
RDSP75087
RDSP75088
RDSP75089
RDSP75090
RDSP75091
RDSP75092
RDSP75093
RDSP75094
RDSP75095
RDSP75096
RDSP75097
RDSP75098
RDSP75099
RDSP75100
RDSP75101
RDSP75102
RDSP75103
RDSP75104
RDSP75105
RDSP75106
RDSP75107
RDSP75108
RDSP75109
RDSP75110
RDSP75111
RDSP75112
RDSP75113
RDSP75114
RDSP75115
RDSP75116
RDSP75117
RDSP75118
RDSP75119
RDSP75120
RDSP75121
RDSP75122
RDSP75123
RDSP75124
RDSP75125
STOCK #
2-1/2" O.D.
1-10
1-16
1-18
1-20
1-24
1-26
1-27
1-28
1-32
1-1/16-7
1-1/16-8
1-1/16-10
1-1/16-12
1-1/16-14
1-1/16-16
1-1/16-18
1-1/16-20
1-1/16-24
1-1/16-28
1-1/8-8
1-1/8-10
1-1/8-14
1-1/8-16
1-1/8-18
1-1/8-20
1-1/8-24
1-1/8-26
1-1/8-27
1-1/8-28
1-1/8-30
1-1/8-32
1-3/16-7
1-3/16-8
1-3/16-12
1-3/16-14
1-3/16-16
1-3/16-18
1-3/16-20
1-3/16-24
1-3/16-27
1-3/16-28
1-3/16-32
1-1/4-8
1-1/4-10
1-1/4-14
1-1/4-16
1-1/4-18
1-1/4-20
RDSP75130
RDSP75131
RDSP75132
RDSP75133
RDSP75134
RDSP75135
RDSP75136
RDSP75137
RDSP75138
RDSP75139
RDSP75140
RDSP75141
RDSP75142
RDSP75143
RDSP75144
RDSP75145
RDSP75146
RDSP75147
RDSP75148
RDSP75149
RDSP75150
RDSP75151
RDSP75152
RDSP75153
RDSP75154
RDSP75155
RDSP75156
RDSP75157
RDSP75158
RDSP75159
RDSP75160
RDSP75161
RDSP75162
RDSP75163
RDSP75164
RDSP75165
RDSP75166
RDSP75167
RDSP75168
RDSP75169
RDSP75170
RDSP75171
RDSP75172
RDSP75173
RDSP75174
RDSP75175
RDSP75176
RDSP75177
SIZE
STOCK #
2-1/2" O.D.
1-1/4-24
1-1/4-26
1-1/4-27
1-1/4-28
1-1/4-30
1-1/4-32
1-1/4-36
1-1/4-40
1-5/16-8
1-5/16-12
1-5/16-14
1-5/16-16
1-5/16-18
1-5/16-20
1-5/16-24
1-5/16-27
1-5/16-32
1-3/8-7
1-3/8-8
1-3/8-10
1-3/8-14
1-3/8-16
1-3/8-18
1-3/8-20
1-3/8-24
1-3/8-27
1-3/8-32
1-7/16-6
1-7/16-8
1-7/16-12
1-7/16-16
1-7/16-18
1-1/2-7
1-1/2-8
1-1/2-10
1-1/2-14
1-1/2-16
1-1/2-18
1-1/2-20
1-1/2-24
1-1/2-27
1-1/2-30
1-1/2-32
RDSP75178
RDSP75179
RDSP75180
RDSP75181
RDSP75182
RDSP75183
RDSP75184
RDSP75185
RDSP75186
RDSP75187
RDSP75188
RDSP75189
RDSP75190
RDSP75191
RDSP75192
RDSP75193
RDSP75194
RDSP75195
RDSP75196
RDSP75197
RDSP75198
RDSP75199
RDSP75200
RDSP75201
RDSP75202
RDSP75203
RDSP75204
RDSP75205
RDSP75206
RDSP75207
RDSP75208
RDSP75209
RDSP75210
RDSP75211
RDSP75212
RDSP75213
RDSP75214
RDSP75215
RDSP75216
RDSP75217
RDSP75218
RDSP75219
RDSP75220
SIZE
STOCK #
3" O.D.
1-10
1-16
1-18
1-20
1-24
1-1/16-8
1-1/16-10
1-1/16-12
1-1/16-14
1-1/16-16
1-1/16-18
1-1/16-20
1-1/16-24
1-1/8-8
1-1/8-10
1-1/8-14
1-1/8-16
1-1/8-18
1-1/8-20
1-1/8-24
1-3/16-8
1-3/16-12
1-3/16-16
1-1/4-6
1-1/4-8
1-1/4-10
1-1/4-14
1-1/4-16
1-1/4-18
1-1/4-20
1-1/4-24
1-5/16-8
1-5/16-10
1-5/16-12
1-5/16-14
1-5/16-16
1-5/16-18
1-5/16-20
1-3/8-8
1-3/8-10
1-3/8-14
1-3/8-16
1-3/8-18
1-3/8-20
1-3/8-24
1-7/16-6
1-7/16-8
1-7/16-12
1-7/16-16
1-7/16-18
1-1/2-8
1-1/2-10
RDSP75230
RDSP75231
RDSP75232
RDSP75233
RDSP75234
RDSP75235
RDSP75236
RDSP75237
RDSP75238
RDSP75239
RDSP75240
RDSP75241
RDSP75242
RDSP75243
RDSP75244
RDSP75245
RDSP75246
RDSP75247
RDSP75248
RDSP75249
RDSP75250
RDSP75251
RDSP75252
RDSP75253
RDSP75254
RDSP75255
RDSP75256
RDSP75257
RDSP75258
RDSP75259
RDSP75260
RDSP75261
RDSP75262
RDSP75263
RDSP75264
RDSP75265
RDSP75266
RDSP75267
RDSP75268
RDSP75269
RDSP75270
RDSP75271
RDSP75272
RDSP75273
RDSP75274
RDSP75275
RDSP75276
RDSP75277
RDSP75278
RDSP75279
RDSP75280
RDSP75281
SIZE
STOCK #
3" O.D.
1-1/2-14
1-1/2-16
1-1/2-18
1-1/2-20
1-1/2-24
1-9/16-6
1-9/16-8
1-9/16-12
1-9/16-16
1-9/16-18
1-5/8-5
1-5/8-5-1/2
1-5/8-6
1-5/8-8
1-5/8-10
1-5/8-12
1-5/8-14
1-5/8-18
1-5/8-20
1-11/16-6
1-11/16-8
1-11/16-12
1-11/16-16
1-11/16-18
1-3/4-5-1/2
1-3/4-6
1-3/4-8
1-3/4-10
1-3/4-14
1-3/4-16
1-3/4-20
1-3/4-24
1-7/8-5
1-7/8-5-1/2
1-7/8-6
1-7/8-8
1-7/8-10
1-7/8-12
1-7/8-14
1-7/8-16
1-7/8-18
1-7/8-20
2-4
2-6
2-8
2-10
2-14
2-16
2-18
2-20
2-24
RDSP75282
RDSP75283
RDSP75284
RDSP75285
RDSP75286
RDSP75287
RDSP75288
RDSP75289
RDSP75290
RDSP75291
RDSP75292
RDSP75293
RDSP75294
RDSP75295
RDSP75296
RDSP75297
RDSP75298
RDSP75299
RDSP75300
RDSP75301
RDSP75302
RDSP75303
RDSP75304
RDSP75305
RDSP75306
RDSP75307
RDSP75308
RDSP75309
RDSP75310
RDSP75311
RDSP75312
RDSP75313
RDSP75314
RDSP75315
RDSP75316
RDSP75317
RDSP75318
RDSP75319
RDSP75320
RDSP75321
RDSP75322
RDSP75323
RDSP75324
RDSP75325
RDSP75326
RDSP75327
RDSP75328
RDSP75329
RDSP75330
RDSP75331
RDSP75332
Round Adjustable Dies - Special Thread
13/16-18
13/16-20
13/16-24
13/16-27
13/16-30
13/16-32
13/16-36
13/16-40
7/8-10
7/8-12
7/8-16
7/8-18
7/8-20
7/8-24
7/8-27
7/8-28
7/8-30
7/8-32
7/8-36
7/8-40
15/16-10
15/16-12
15/16-14
15/16-16
15/16-18
15/16-20
15/16-24
15/16-27
15/16-28
15/16-30
15/16-32
1-10
1-16
1-18
1-20
1-24
1-27
1-28
1-30
1-32
1-36
1-40
1-48
1-56
SIZE
B
1 per pack
B-25
Round Adj. Dies - Special Thread - Metric
High-Speed Steel
Features: • Provides improved wear life .
• Ideal for precision threading with adjustment of die by set screws .
• Allows the user to under or over cut threads .
METRIC SIZES
SIZE
STOCK #
Round Adjustable Dies - Special Thread
1" O.D.
B
B-26
3 x 0.35
3 x 0.60
3 x 0.75
3.5 x 0.35
3.5 x 0.50
4 x 0.50
4 x 0.35
4 x 0.60
4 x 0.75
4 x 1.00
4.5 x 0.50
4.5 x 1.00
5 x 0.50
5 x 0.75
5 x 0.90
5 x 1.00
5.5 x 0.50
5.5 x 0.70
5.5 x 0.90
6 x 0.50
6 x 0.75
6 x 1.25
6 x 1.50
7 x 0.50
7 x 0.75
7 x 1.25
8 x 0.50
8 x 0.75
8 x 1.50
8 x 1.75
9 x 0.50
9 x 0.75
9 x 1.00
9 x 1.25
9 x 1.50
9 x 1.75
10 x 0.50
10 x 0.75
10 x 1.00
10 x 1.75
10 x 2.00
11 x 0.50
11 x 0.75
11 x 1.00
11 x 1.25
11 x 1.50
11 x 1.75
11 x 2.00
12 x 0.50
12 x 0.75
12 x 1.00
12 x 1.50
12 x 2.00
RDSPM75320
RDSPM75321
RDSPM75322
RDSPM75323
RDSPM75324
RDSPM75325
RDSPM75326
RDSPM75327
RDSPM75328
RDSPM75329
RDSPM75330
RDSPM75331
RDSPM75332
RDSPM75333
RDSPM75334
RDSPM75335
RDSPM75336
RDSPM75337
RDSPM75338
RDSPM75339
RDSPM75340
RDSPM75341
RDSPM75342
RDSPM75343
RDSPM75344
RDSPM75345
RDSPM75346
RDSPM75347
RDSPM75348
RDSPM75349
RDSPM75350
RDSPM75351
RDSPM75352
RDSPM75353
RDSPM75354
RDSPM75355
RDSPM75356
RDSPM75357
RDSPM75358
RDSPM75359
RDSPM75360
RDSPM75361
RDSPM75362
RDSPM75363
RDSPM75364
RDSPM75365
RDSPM75366
RDSPM75367
RDSPM75368
RDSPM75369
RDSPM75370
RDSPM75371
RDSPM75372
SIZE
STOCK #
SIZE
1-1/2" O.D.
9 x 0.50
9 x 0.75
9 x 1.00
9 x 1.25
10 x 0.50
10 x 0.75
10 x 1.00
11 x 0.50
11 x 0.75
11 x 1.00
11 x 1.25
11 x 1.50
12 x 0.50
12 x 0.75
12 x 1.00
12 x 1.50
12 x 2.00
13 x 0.50
13 x 0.75
13 x 1.00
13 x 1.25
13 x 1.50
13 x 1.75
13 x 2.00
14 x 0.50
14 x 0.75
14 x 1.00
14 x 1.25
14 x 1.75
15 x 0.50
15 x 1.00
15 x 1.50
15 x 2.00
16 x 0.50
16 x 0.75
16 x 1.00
16 x 1.25
16 x 1.50
16 x 1.75
17 x 0.50
17 x 1.00
17 x 1.50
17 x 2.00
18 x 0.50
18 x 1.00
18 x 1.25
18 x 1.75
18 x 2.00
19 x 0.50
19 x 1.00
19 x 1.50
19 x 2.00
20 x 1.00
20 x 1.25
20 x 1.75
20 x 2.00
RDSPM75410
RDSPM75411
RDSPM75412
RDSPM75413
RDSPM75414
RDSPM75415
RDSPM75416
RDSPM75417
RDSPM75418
RDSPM75419
RDSPM75420
RDSPM75421
RDSPM75422
RDSPM75423
RDSPM75424
RDSPM75425
RDSPM75426
RDSPM75427
RDSPM75428
RDSPM75429
RDSPM75430
RDSPM75431
RDSPM75432
RDSPM75433
RDSPM75434
RDSPM75435
RDSPM75436
RDSPM75437
RDSPM75438
RDSPM75439
RDSPM75440
RDSPM75441
RDSPM75442
RDSPM75443
RDSPM75444
RDSPM75445
RDSPM75446
RDSPM75446A
RDSPM75447
RDSPM75448
RDSPM75449
RDSPM75450
RDSPM75451
RDSPM75452
RDSPM75453
RDSPM75454
RDSPM75455
RDSPM75456
RDSPM75457
RDSPM75458
RDSPM75459
RDSPM75460
RDSPM75461
RDSPM75462
RDSPM75463
RDSPM75464
STOCK #
SIZE
2" O.D.
18
19
20
20
20
21
21
21
21
22
22
23
23
23
23
24
25
25
25
25
26
26
27
27
28
28
28
30
30
30
30
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.00
1.50
1.00
1.25
2.00
1.00
1.50
2.00
2.50
1.00
2.00
1.00
1.50
2.00
2.50
1.50
1.00
1.50
2.00
2.50
1.50
2.00
1.00
1.50
1.00
1.50
2.00
1.00
1.50
2.00
3.00
RDSPM75510
RDSPM75511
RDSPM75512
RDSPM75513
RDSPM75514
RDSPM75515
RDSPM75516
RDSPM75517
RDSPM75518
RDSPM75519
RDSPM75520
RDSPM75521
RDSPM75522
RDSPM75523
RDSPM75524
RDSPM75525
RDSPM75526
RDSPM75527
RDSPM75528
RDSPM75529
RDSPM75530
RDSPM75531
RDSPM75532
RDSPM75533
RDSPM75534
RDSPM75535
RDSPM75536
RDSPM75537
RDSPM75538
RDSPM75539
RDSPM75540
2-1/2" O.D.
32
33
34
35
35
36
38
x
x
x
x
x
x
x
1.50
1.50
1.50
1.00
1.50
1.50
1.50
RDSPM75610
RDSPM75611
RDSPM75612
RDSPM75613
RDSPM75614
RDSPM75615
RDSPM75620
STOCK #
3" O.D.
39
40
42
42
42
45
45
45
48
48
48
50
52
52
52
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.50
1.50
1.50
3.00
4.50
1.50
3.00
4.50
1.50
3.00
5.00
1.50
1.50
3.00
5.00
1 per pack
RDSPM75621
RDSPM75622
RDSPM75623
RDSPM75624
RDSPM75625
RDSPM75626
RDSPM75627
RDSPM75628
RDSPM75629
RDSPM75630
RDSPM75631
RDSPM75632
RDSPM75633
RDSPM75634
RDSPM75635
Hexagon Dies
High-Speed Steel
Right Hand Thread
Features:
• Designed for tough cutting applications of
all types of external threads .
• Versatile hexagon shape assures use with
adjustable wrench .
TPI
THREAD
NC, NF, NS
SIZE
DIE
WIDTH A/F
(A)
THICKNESS
(B)
STOCK #
THREAD
SIZE
TPI
HSHD74501
HSHD74503
HSHD74505
HSHD74507
HSHD74509
HSHD74511
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
MACHINE SCREW SIZES
40
32
32
24
32
24
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1 per pack
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
STOCK #
NPT SIZES
FRACTIONAL
19/32"
19/32"
11/16"
11/16"
25/32"
25/32"
7/8"
7/8"
1-1/16"
1-1/16"
1-1/16"
1-1/16"
1-1/4"
1-1/4"
1-7/16"
1-7/16"
1-5/8"
1-5/8"
1-13/16"
1-13/16"
1-13/16"
2"
2"
2-3/16"
2-3/16"
2-3/8"
2-3/8"
2-9/16"
2-9/16"
THICKNESS
(B)
HSHD74512
HSHD74513
HSHD74514
HSHD74515
HSHD74516
HSHD74517
HSHD74518
HSHD74519
HSHD74520
HSHD74521
HSHD74522
HSHD74523
HSHD74524
HSHD74525
HSHD74526
HSHD74527
HSHD74528
HSHD74529
HSHD74530
HSHD74531
HSHD74532
HSHD74533
HSHD74534
HSHD74535
HSHD74536
HSHD74537
HSHD74538
HSHD74539
HSHD74540
3/4"
1-1/16"
1-7/16"
1-7/16"
1-13/16"
2-3/16"
3-1/8"
3-1/8"
4-1/2"
3/8"
1/2"
5/8"
3/4"
1"
1"
1"
1"
1-1/2"
HSHD74551
HSHD74552
HSHD74553
HSHD74554
HSHD74555
HSHD74556
HSHD74557
HSHD74558
HSHD74559
1 per pack
Eight Pitch Hexagon Dies
Hexagon Dies
4
6
8
10
10
12
DIE
WIDTH A/F
(A)
High Carbon Steel
B
Features:
• Designed for tough cutting applications of all types of
external threads .
• Versatile hexagon shape assures use with adjustable wrench .
TAP SIZE
TPI
STOCK #
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-3/4"
1-7/8"
2"
2-1/8"
2-1/4"
2-3/8"
2-1/2"
2-5/8"
2-3/4"
2-7/8"
3"
3-1/4"
3-1/2"
3-3/4"
4"
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
CSRTD70751
CSRTD70752
CSRTD70753
CSRTD70754
CSRTD70755
CSRTD70756
CSRTD70757
CSRTD70758
CSRTD70759
CSRTD70760
CSRTD70761
CSRTD70762
CSRTD70763
CSRTD70764
CSRTD70765
CSRTD70766
CSRTD70767
CSRTD70768
CSRTD70769
CSRTD70770
1 per pack
B-27
Hand Taps Carbon Steel
Features:
Cut Thread, Right Hand
Bright Finish
• Precision-made from high carbon tool steel .
• Ideal for hand threading in routine maintenance, repair work & for rethreading applications .
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole .
TAPER, PLUG, BOTTOMING & SETS
NC = National Coarse NF = National Fine
TAP
SIZE
TPI
NC, NF, NS
TAPER
STOCK #
BULK
PLUG
STOCK #
BULK
NS = National Standard
PLUG
STOCK #
CARDED
SP = Spartk Plug
BOTTOM
STOCK #
BULK
SET OF 3
STOCK #
BOXED
CSHTB70500
CSHTB70501
CSHTB70502
CSHTB70503
CSHTB70504
CSHTB70505
CSHTB70506
CSHTB70507
CSHTB70508
CSHTB70509
CSHTB70510
CSHTB70511
CSHTB70512
CSHTB70513
CSHTB70514
CSHTB70515
CSHTB70516
CSHTB70517
CSHTB70518
CSHTB70519
CSHTS70500
CSHTS70501
CSHTS70502
CSHTS70503
CSHTS70504
CSHTS70505
CSHTS70506
CSHTS70507
CSHTS70508
CSHTS70509
CSHTS70510
CSHTS70511
CSHTS70512
CSHTS70513
CSHTS70514
CSHTS70515
CSHTS70516
CSHTS70517
CSHTS70518
CSHTS70519
CSHTB70530
CSHTB70531
CSHTB70532
CSHTB70533
CSHTB70534
CSHTB70535
CSHTB70536
CSHTB70537
CSHTB70538
CSHTP70539
CSHTB70540
CSHTB70541
CSHTB70542
CSHTB70543
CSHTB70544
CSHTB70545
CSHTB70546
CSHTB70547
CSHTB70548
CSHTB70549
—
CSHTB70551
CSHTB70552
CSHTB70553
CSHTB70554
CSHTB70555
CSHTB70556
CSHTB70557
CSHTB70558
CSHTB70559
CSHTB70560
CSHTB70561
CSHTS70530
CSHTS70531
CSHTS70532
CSHTS70533
CSHTS70534
CSHTS70535
CSHTS70536
CSHTS70537
CSHTS70538
CSHTS70539
CSHTS70540
CSHTS70541
CSHTS70542
CSHTS70543
CSHTS70544
CSHTS70545
CSHTS70546
CSHTS70547
CSHTS70548
CSHTS70549
—
CSHTS70551
CSHTS70552
CSHTS70553
CSHTS70554
CSHTS70555
CSHTS70556
CSHTS70557
CSHTS70558
CSHTS70559
CSHTS70560
CSHTS70561
Hand Taps Carbon Steel
MACHINE SCREW SIZES
B
0
1
1
2
2
3
3
4
4
4
5
5
6
6
8
8
10
10
12
12
80 NF
64 NC
72 NF
56 NC
64 NF
48 NC
56 NF
36 NS
40 NC
48 NF
40 NC
44 NF
32 NC
40 NF
32 NC
36 NF
24 NC
32 NF
24 NC
28 NF
CSHTT70500
CSHTT70501
CSHTT70502
CSHTT70503
CSHTT70504
CSHTT70505
CSHTT70506
CSHTT70507
CSHTT70508
CSHTT70509
CSHTT70510
CSHTT70511
CSHTT70512
CSHTT70513
CSHTT70514
CSHTT70515
CSHTT70516
CSHTT70517
CSHTT70518
CSHTT70519
CSHTP70500
CSHTP70501
CSHTP70502
CSHTP70503
CSHTP70504
CSHTP70505
CSHTP70506
CSHTP70507
CSHTP70508
CSHTP70509
CSHTP70510
CSHTP70511
CSHTP70512
CSHTP70513
CSHTP70514
CSHTP70515
CSHTP70516
CSHTP70517
CSHTP70518
CSHTP70519
FRACTIONAL
3/16"
3/16"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
* 7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
24 NS
32 NS
20 NC
28 NF
18 NC
24 NF
16 NC
24 NF
14 NC
20 NF
13 NC
20 NF
12 NC
18 NF
11 NC
18 NF
10 NC
16 NF
9 NC
14 NF
18 SP
8 NC
12 NF
14 NS
7 NC
12 NF
7 NC
12 NF
6 NC
12 NF
6 NC
12 NF
CSHTT70530
CSHTT70531
CSHTT70532
CSHTT70533
CSHTT70534
CSHTT70535
CSHTT70536
CSHTT70537
CSHTT70538
CSHTT70539
CSHTT70540
CSHTT70541
CSHTT70542
CSHTT70543
CSHTT70544
CSHTT70545
CSHTT70546
CSHTT70547
CSHTT70548
CSHTT70549
—
CSHTT70551
CSHTT70552
CSHTT70553
CSHTT70554
CSHTT70555
CSHTT70556
CSHTT70557
CSHTT70558
CSHTT70559
CSHTT70560
CSHTT70561
CSHTP70530
CSHTP70531
CSHTP70532
CSHTP70533
CSHTP70534
CSHTP70535
CSHTP70536
CSHTP70537
CSHTP70538
CSHTP70539
CSHTP70540
CSHTP70541
CSHTP70542
CSHTP70543
CSHTP70544
CSHTP70545
CSHTP70546
CSHTP70547
CSHTP70548
CSHTP70549
CSHTP70550
CSHTP70551
CSHTP70552
CSHTP70553
CSHTP70554
CSHTP70555
CSHTP70556
CSHTP70557
CSHTP70558
CSHTP70559
CSHTP70560
CSHTP70561
0-80 to 1", 3 per pack, 1-1/8 and above, 1 per pack
B-28
CSHTP70500C
CSHTP70501C
CSHTP70502C
CSHTP70503C
CSHTP70504C
CSHTP70505C
CSHTP70506C
CSHTP70507C
CSHTP70508C
CSHTP70509C
CSHTP70510C
CSHTP70511C
CSHTP70512C
CSHTP70513C
CSHTP70514C
CSHTP70515C
CSHTP70516C
CSHTP70517C
CSHTP70518C
CSHTP70519C
CSHTP70530C
CSHTP70531C
CSHTP70532C
CSHTP70533C
CSHTP70534C
CSHTP70535C
CSHTP70536C
CSHTP70537C
CSHTP70538C
CSHTP70639C
CSHTP70540C
CSHTP70541C
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
* Spark Plug Tap
Metric Hand Taps
High Carbon Steel
Features:
• Precision-made from high carbon tool steel .
• Ideal for hand threading in routine maintenance,
repair work and for rethreading applications .
METRIC HAND TAPS
Expanded
STOCK #
PITCH
3
3
4
4
4
5
5
6
7
8
8
9
9
9
10
10
10
11
12
12
12
14
14
14
16
16
18
18
18
20
20
22
22
24
24
27
27
30
30
0.50
0.60
0.50
0.70
0.75
0.80
0.90
1.00
1.00
1.00
1.25
0.75
1.00
1.25
1.00
1.25
1.50
1.50
1.25
1.50
1.75
1.25
1.50
2.00
1.50
2.00
2.00
2.50
1.50
1.50
2.50
1.50
2.50
2.00
3.00
2.00
3.00
2.00
3.50
TAPER
CSMTT70810
CSMTT70811
CSMTT70812
CSMTT70813
CSMTT70813A
CSMTT70814
CSMTT70815
CSMTT70816
CSMTT70817
CSMTT70818
CSMTT70819
CSMTT70820
CSMTT70821
CSMTT70822
CSMTT70823
CSMTT70824
CSMTT70825
CSMTT70826
CSMTT70827
CSMTT70828
CSMTT70829
CSMTT70830
CSMTT70831
CSMTT70832
CSMTT70833
CSMTT70834
CSMTT70835
CSMTT70836
CSMTT70837
CSMTT70838
CSMTT70839
CSMTT70840
CSMTT70841
CSMTT70842
CSMTT70843
CSMTT70844
CSMTT70845
CSMTT70846
CSMTT70847
PLUG
CSMTP70810
CSMTP70811
CSMTP70812
CSMTP70813
CSMTP70813A
CSMTP70814
CSMTP70815
CSMTP70816
CSMTP70817
CSMTP70818
CSMTP70819
CSMTP70820
CSMTP70821
CSMTP70822
CSMTP70823
CSMTP70824
CSMTP70825
CSMTP70826
CSMTP70827
CSMTP70828
CSMTP70829
CSMTP70830
CSMTP70831
CSMTP70832
CSMTP70833
CSMTP70834
CSMTP70835
CSMTP70836
CSMTP70837
CSMTP70838
CSMTP70839
CSMTP70840
CSMTP70841
CSMTP70842
CSMTP70843
CSMTP70844
CSMTP70845
CSMTP70846
CSMTP70847
BOTTOMING
CSMTB70810
CSMTB70811
CSMTB70812
CSMTB70813
CSMTB70813A
CSMTB70814
CSMTB70815
CSMTB70816
CSMTB70817
CSMTB70818
CSMTB70819
CSMTB70820
CSMTB70821
CSMTB70822
CSMTB70823
CSMTB70824
CSMTB70825
CSMTB70826
CSMTB70827
CSMTB70828
CSMTB70829
CSMTB70830
CSMTB70831
CSMTB70832
CSMTB70833
CSMTB70834
CSMTB70835
CSMTB70836
CSMTB70837
CSMTB70838
CSMTB70839
CSMTB70840
CSMTB70841
CSMTB70842
CSMTB70843
CSMTB70844
CSMTB70845
CSMTB70846
CSMTB70847
SET OF 3
BOXED
CSMTS70810
CSMTS70811
CSMTS70812
CSMTS70813
CSMTS70813A
CSMTS70814
CSMTS70815
CSMTS70816
CSMTS70817
CSMTS70818
CSMTS70819
CSMTS70820
CSMTS70821
CSMTS70822
CSMTS70823
CSMTS70824
CSMTS70825
CSMTS70826
CSMTS70827
CSMTS70828
CSMTS70829
CSMTS70830
CSMTS70831
CSMTS70832
CSMTS70833
CSMTS70834
CSMTS70835
CSMTS70836
CSMTS70837
CSMTS70838
CSMTS70839
CSMTS70840
CSMTS70841
CSMTS70842
CSMTS70843
CSMTS70844
CSMTS70845
CSMTS70846
CSMTS70847
Metric Hand Taps
TAP
SIZE
B
3 to 24mm, 3 per pack, 27mm and above, 1 per pack
*Please note stock numbers CSMT70810 to CSMT70847 from catalog 03G page B6 have been revised .
B-29
Taper Pipe Taps
High Carbon Steel
Taper Pipe Taps • Spark Plug Taps
TAPER PIPE TAPS, NPT
B
TAP
SIZE
TPI
1/16"
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
27
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
Features:
STOCK #
BULK
CARDED
CSNPT70560
CSNPT70561
CSNPT70562
CSNPT70563
CSNPT70564
CSNPT70565
CSNPT70566
CSNPT70567
CSNPT70568
CSNPT70569
CSNPT70560C
CSNPT70561C
CSNPT70562C
CSNPT70563C
CSNPT70564C
–
–
–
–
–
• Tapered at the rate of 3/4" per foot .
• Normally used for tapping pipe fittings .
• The nominal size of the tap is that of the pipe fitting
being tapped and not the actual size of the tap .
Bulk 1/16" to 1", 3 per pack, 1-1/4" and above, 1 per pack
Card 1/16" to 1/2", 1 per card
Spark Plug Taps
High Carbon Steel
Features:
• Ideal for threading or rethreading spark plug holes .
• Available in standard and metric threads .
CSMTP70855
4 PC. SPARK PLUG TAP SET
In Wooden Storage Case
TAP SIZE
NO. OF
FLUTES
DESCRIPTION
7/8" - 18NS
4
CSHTP70550
Tap Set Contains:
10mm - 1.00
4
CSMTP70823
10mm - 1.00mm
12mm - 1.25
4
CSMTP70827
12mm - 1.25mm
14mm - 1.25
4
CSMTP70830
14mm - 1.25mm
18mm - 1.50
4
CSMTP70837
3 per pack
B-30
STOCK #
18mm - 1.50mm
STOCK #
CSMTP70855
Hexagon Dies
High Carbon Steel
Features:
• Suitable for cutting all types of external
threads .
• Versatile hexagon shape assures use
with die stock or adjustable wrench .
• Best suited for maintenance and
repair work .
HEXAGON DIES
THREAD
SIZE
METRIC – HEXAGON DIES
STOCK #
TPI
BULK
CARDED
THREAD
SIZE
STOCK #
TPI
1" A.F.
40
40
44
32
40
32
36
24
32
24
20
28
18
24
16
24
14
20
13
20
27
18
CSHD70859
CSHD70860
CSHD70860A
CSHD70861
CSHD70861A
CSHD70862
CSHD70862A
CSHD70863
CSHD70864
CSHD70865
CSHD70866
CSHD70867
CSHD70868
CSHD70869
CSHD70870
CSHD70871
CSHD70872
CSHD70873
CSHD70874
CSHD70875
CSHD70891
CSHD70893
1" A.F.
CSHD70859C
CSHD70860C
CSHD70860AC
CSHD70861C
CSHD70861AC
CSHD70862C
CSHD70862AC
CSHD70863C
CSHD70864C
CSHD70865C
CSHD70866C
CSHD70867C
CSHD70868C
CSHD70869C
CSHD70870C
CSHD70871C
CSHD70872C
CSHD70873C
CSHD70874C
CSHD70875C
CSHD70891C
CSHD70893C
1-7/16" A.F.
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
1/8" NPT
1/4" NPT
1 per pack
13
20
12
18
11
18
10
16
27
18
CSHD70880
CSHD70881
CSHD70882
CSHD70883
CSHD70884
CSHD70885
CSHD70886
CSHD70887
CSHD70892
CSHD70894
CARDED
CSHD70880C
CSHD70881C
CSHD70882C
CSHD70883C
CSHD70884C
CSHD70885C
CSHD70886C
CSHD70887C
CSHD70892C
CSHD70894C
Card 1 per card
3
3
4
4
5
5
6
7
8
8
9
9
9
10
10
10
11
12
12
12
0.50
0.60
0.50
0.70
0.80
0.90
1.00
1.00
1.00
1.25
0.75
1.00
1.25
1.00
1.25
1.50
1.50
1.25
1.50
1.75
MHD71010
MHD71011
MHD71012
MHD71013
MHD71014
MHD71015
MHD71016
MHD71017
MHD71018
MHD71019
MHD71020
MHD71021
MHD71022
MHD71023
MHD71024
MHD71025
MHD71026
MHD71027
MHD71028
MHD71029
MHD71010C
MHD71011C
MHD71012C
MHD71013C
MHD71014C
MHD71015C
MHD71016C
MHD71017C
MHD71018C
MHD71019C
MHD71020C
MHD71021C
MHD71022C
MHD71023C
MHD71024C
MHD71025C
MHD71026C
MHD71027C
MHD71028C
MHD71029C
Hexagon Dies
4
5
5
6
6
8
8
10
10
12
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
1/8" NPT
1/4" NPT
BULK
B
1-7/16" A.F.
14
14
14
16
16
16
18
18
18
1 per pack
1.25
1.50
2.00
1.25
1.50
2.00
1.50
2.00
2.50
MHD71029A
MHD71030
MHD71031
MHD71032
MHD71033
MHD71034
MHD71035
MHD71036
MHD71037
—
—
—
—
—
—
—
—
—
Card 3 to 12mm, 1 per card
See Die Stock on Page B35.
B-31
Hexagon Rethreading Dies
High Carbon Steel
RIGHT HAND THREAD
TAP
SIZE
TPI
DIE
WIDTH A/F
(A)
THICKNESS
(B)
Features: • Specially designed for cleaning dirty or rusty threads .
STOCK #
Hexagon Rethreading Dies
MACHINE SCREW SIZES
B
4
4
5
5
6
6
8
8
10
10
12
12
40
48
40
44
32
40
32
36
24
32
24
28
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
1-5/8"
1-5/8"
1-3/4"
1-3/4"
2"
2"
2-1/2"
2-3/4"
3"
3-1/4"
3-1/2"
3-3/4"
4"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
6
12
5
12
4-1/2
12
4
4
4
4
4
4
4
19/32"
19/32"
11/16"
11/16"
25/32"
25/32"
7/8"
7/8"
1-1/16"
1-1/16"
1-1/16"
1-1/16"
1-1/4"
1-1/4"
1-7/16"
1-7/16"
1-5/8"
1-5/8"
1-13/16"
1-13/16"
1-13/16"
2"
2"
2-3/16"
2-3/16"
2-3/8"
2-3/8"
2-9/16"
2-9/16"
3-1/8"
3-1/8"
3-1/8"
3-1/8"
3-1/2"
3-1/2"
4-1/2"
4-1/2"
5"
5"
5"
6"
7"
1/16"
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
27
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
25/32"
25/32"
1-1/16"
1-1/4"
1-7/16"
1-13/16"
2-3/16"
2-9/16"
3-1/8"
4-1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
CSRTD70689
CSRTD70690
CSRTD70691
CSRTD70692
CSRTD70693
CSRTD70694
CSRTD70695
CSRTD70696
CSRTD70697
CSRTD70698
CSRTD70699
CSRTD70700
FRACTIONAL
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-5/8"
2"
2"
2"
2-1/4"
2-3/8"
CSRTD70701
CSRTD70702
CSRTD70703
CSRTD70704
CSRTD70705
CSRTD70706
CSRTD70707
CSRTD70708
CSRTD70709
CSRTD70710
CSRTD70711
CSRTD70712
CSRTD70713
CSRTD70714
CSRTD70715
CSRTD70716
CSRTD70717
CSRTD70718
CSRTD70719
CSRTD70720
CSRTD70721
CSRTD70722
CSRTD70723
CSRTD70724
CSRTD70725
CSRTD70726
CSRTD70727
CSRTD70728
CSRTD70729
CSRTD70730
CSRTD70731
CSRTD70732
CSRTD70733
CSRTD70734
CSRTD70735
CSRTD70736
CSRTD70737
CSRTD70738
CSRTD70739
CSRTD70739A
CSRTD70739B
CSRTD70739C
NPT SIZES
1 per pack
B-32
3/8"
3/8"
1/2"
5/8"
3/4"
1"
1"
1"
1"
1-1/2"
• Restores damaged threads to correct form and lead .
• Will not undercut good threads .
• Versatile hexagon shape assures use with any open end,
box or adjustable wrench .
LEFT HAND THREAD
TAP
SIZE
DIE
WIDTH A/F
(A)
THICKNESS
(B)
STOCK #
MACHINE SCREW SIZES
4
4
5
5
6
6
8
8
10
10
12
12
40
48
40
44
32
40
32
36
24
32
24
28
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
19/32"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1-1/8"
1-1/8"
1-1/4"
1-1/4"
1-3/8"
1-3/8"
1-1/2"
1-1/2"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
9
14
8
12
14
7
12
7
12
6
12
6
12
19/32"
19/32"
11/16"
11/16"
25/32"
25/32"
7/8"
7/8"
1-1/16"
1-1/16"
1-1/16"
1-1/16"
1-1/4"
1-1/4"
1-7/16"
1-7/16"
1-5/8"
1-5/8"
1-13/16"
1-13/16"
1-13/16"
2"
2"
2-3/16"
2-3/16"
2-3/8"
2-3/8"
2-9/16"
2-9/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
CSRTD70689L
CSRTD70690L
CSRTD70691L
CSRTD70692L
CSRTD70693L
CSRTD70694L
CSRTD70695L
CSRTD70696L
CSRTD70697L
CSRTD70698L
CSRTD70699L
CSRTD70700L
FRACTIONAL
1 per pack
CSRTD70740A
CSRTD70740
CSRTD70741
CSRTD70742
CSRTD70743
CSRTD70744
CSRTD70745
CSRTD70746
CSRTD70747
CSRTD70748
TPI
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
CSRTD70701L
CSRTD70702L
CSRTD70703L
CSRTD70704L
CSRTD70705L
CSRTD70706L
CSRTD70707L
CSRTD70708L
CSRTD70709L
CSRTD70710L
CSRTD70711L
CSRTD70712L
CSRTD70713L
CSRTD70714L
CSRTD70715L
CSRTD70716L
CSRTD70717L
CSRTD70718L
CSRTD70719L
CSRTD70720L
CSRTD70721L
CSRTD70722L
CSRTD70723L
CSRTD70724L
CSRTD70725L
CSRTD70726L
CSRTD70727L
CSRTD70728L
CSRTD70729L
Hexagon Rethreading Dies - Metric
High Carbon Steel
Features: • Ideal for repairing damaged threads without
undercutting good threads .
• Versatile hexagon shape assures use with
any open end, box or adjustable wrench .
RIGHT HAND THREAD
LEFT HAND THREAD
TPI
DIE WIDTH A/F
(A)
THICKNESS
(B)
STOCK #
3
3.5
4
4
4.5
5
6
6.3
7
8
8
10
10
10
11
12
12
14
14
14
16
16
16
18
18
18
20
20
22
22
24
24
27
27
30
30
33
33
36
36
39
39
40
42
42
45
45
48
48
52
52
0.50
0.60
0.70
0.75
0.75
0.80
1.00
1.00
1.00
1.00
1.25
1.00
1.25
1.50
1.50
1.25
1.75
1.25
1.50
2.00
1.25
1.50
2.00
1.50
2.00
2.50
1.50
2.50
1.50
2.50
2.00
3.00
2.00
3.00
2.00
3.50
2.00
3.50
3.00
4.00
3.00
4.00
1.50
1.50
4.50
1.50
4.50
1.50
5.00
1.50
5.00
19/32
19/32
19/32
19/32
19/32
19/32
19/32
19/32
11/16
11/16
11/16
25/32
25/32
25/32
7/8
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/4
1-1/4
1-1/4
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
1-5/8
1-5/8
1-13/16
1-13/16
2
2
2
2
2-3/16
2-3/16
2-9/16
2-9/16
2-9/16
2-9/16
2-9/16
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/2
3-1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
7/16
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
7/8
7/8
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
MHD70751
MHD70752
MHD70753
MHD70753A
MHD70754
MHD70755
MHD70756
MHD70757
MHD70758
MHD70759
MHD70760
MHD70761A
MHD70761
MHD70762
MHD70763
MHD70764
MHD70765
MHD70766
MHD70767
MHD70768
MHD70769
MHD70770
MHD70771
MHD70772
MHD70773
MHD70774
MHD70775
MHD70776
MHD70777
MHD70778
MHD70779
MHD70780
MHD70781
MHD70782
MHD70783
MHD70784
MHD70785
MHD70786
MHD70787
MHD70788
MHD70789
MHD70790
MHD70791
MHD70792
MHD70793
MHD70794
MHD70795
MHD70796
MHD70797
MHD70798
MHD70799
THREAD
SIZE
TPI
DIE WIDTH A/F
(A)
THICKNESS
(B)
5
6
6.3
7
8
8
10
10
11
12
12
14
14
14
16
16
16
18
18
18
20
20
22
22
24
24
27
27
30
30
0.80
1.00
1.00
1.00
1.00
1.25
1.25
1.50
1.50
1.25
1.75
1.25
1.50
2.00
1.25
1.50
2.00
1.50
2.00
2.50
1.50
2.50
1.50
2.50
2.00
3.00
2.00
3.00
2.00
3.50
19/32
19/32
19/32
11/16
11/16
11/16
25/32
25/32
7/8
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/4
1-1/4
1-1/4
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
1-5/8
1-5/8
1-13/16
1-13/16
2
2
2
2
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
7/16
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
7/8
7/8
1
1
1
1
1
1
STOCK #
MHD70755L
MHD70756L
MHD70757L
MHD70758L
MHD70759L
MHD70760L
MHD70761L
MHD70762L
MHD70763L
MHD70764L
MHD70765L
MHD70766L
MHD70767L
MHD70768L
MHD70769L
MHD70770L
MHD70771L
MHD70772L
MHD70773L
MHD70774L
MHD70775L
MHD70776L
MHD70777L
MHD70778L
MHD70779L
MHD70780L
MHD70781L
MHD70782L
MHD70783L
MHD70784L
Hexagon Rethreading Dies
THREAD
SIZE
B
1 per pack
1 per pack
B-33
Round Adjustable Dies
High Carbon Steel
Features: • Ideal for precision threading with adjustment of die by set screw .
• Allows the user to under or over cut theads .
THREAD
SIZE
STOCK #
TPI
BULK
CARDED
THREAD
SIZE
TPI
Round Adjustable Dies
13/16" O.D.
B
0
1
1
2
2
3
3
4
4
80
64
72
56
64
48
56
40
48
5
5
6
6
8
8
10
10
12
12
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
40
44
32
40
32
36
24
32
24
28
20
28
18
24
16
24
14
20
13
20
CSRD70591
CSRD70592
CSRD70593
CSRD70594
CSRD70595
CSRD70596
CSRD70597
CSRD70598
CSRD70599
CARDED
1-1/2" O.D.
CSRD70591C
CSRD70592C
CSRD70593C
CSRD70594C
CSRD70595C
CSRD70596C
CSRD70597C
CSRD70598C
CSRD70599C
1" O.D.
CSRD70601
CSRD70602
CSRD70603
CSRD70604
CSRD70605
CSRD70606
CSRD70607
CSRD70608
CSRD70609
CSRD70610
CSRD70611
CSRD70612
CSRD70613
CSRD70614
CSRD70615
CSRD70616
CSRD70617
CSRD70618
CSRD70619
CSRD70620
STOCK #
BULK
CSRD70601C
CSRD70602C
CSRD70603C
CSRD70604C
CSRD70605C
CSRD70606C
CSRD70607C
CSRD70608C
CSRD70609C
CSRD70610C
CSRD70611C
CSRD70612C
CSRD70613C
CSRD70614C
CSRD70615C
CSRD70616C
CSRD70617C
CSRD70618C
CSRD70619C
CSRD70620C
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
CSRD70630
CSRD70631
CSRD70632
CSRD70633
CSRD70634
CSRD70635
CSRD70636
CSRD70637
CSRD70638
CSRD70639
CSRD70640
CSRD70641
CSRD70642
CSRD70643
CSRD70644
CSRD70645
CSRD70630C
CSRD70631C
CSRD70632C
CSRD70633C
CSRD70634C
CSRD70635C
CSRD70636C
CSRD70637C
CSRD70638C
CSRD70639C
CSRD70640C
CSRD70641C
CSRD70642C
CSRD70643C
CSRD70644C
CSRD70645C
2" O.D.
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1"
11
18
10
16
9
14
8
12
14
CSRD70650
CSRD70651
CSRD70652
CSRD70653
CSRD70654
CSRD70655
CSRD70656
CSRD70657
CSRD70658
Card 1 per card
1 per pack
BRITISH STANDARD
ROUND ADJUSTABLE PIPE DIES
–
–
–
–
–
–
–
–
–
THREAD RESTORING FILES
BSPP STRAIGHT THREAD
Features:
FRACTIONAL SIZES
TAP
SIZE
TPI
NC, NF,
NS
1" O.D.
1-1/2" O.D.
2" O.D.
1/8"
1/4"
3/8"
28
19
19
BSPD105
BSPD107
–
–
BSPD157
–
–
–
BSPD209
STOCK #
1 per pack
UNIVERSAL THREAD FILE
Single Blade Universal Thread File
renews all 60O Threads (also metric)
STOCK # RTF70751
B-34
NEW!
• Restores battered, rusted • Sizes clearly marked .
or corroded threads .
• Overlap good threads to use as
• Usable as a thread gauge .
a file to restore damaged area .
DESCRIPTION
THREADS
Thread
Restoring Files
11, 12, 13, 14, 16, 18, 20 & 24 TPI
TRF01
9, 10, 12, 16, 20, 27, 28, & 32 TPI
TRF02
External
Pipe Files
Metric
Thread Files
8, 10, 11-1/2, 14
TRF05
8, 10, 11-1/2, 14, 18/10, 16, 24, 27
.80, 1 .0, 1 .25, 1 .5,
1 .75, 2 .0, 2 .5, 3 .0
TRF07
Plastic
Handles
For Stock # – TRF01, TRF02,
4 File Set in
Plastic Roll
1 each
#1, #2, #7, #8
1 per pack
STOCK #
TRF07, TRF08
TRF08
TRF12
TRF15P
Tapping Tools & Accessories
T-HANDLE TAP WRENCH
DIE STOCK
DS63002
Chrome Plated for
Square Driven Tools:
Taps - Reamers Screw Extractors
DSH63008
TH63024
OVERALL
LENGTH
TAP SIZE
STOCK #
SIZE
OAL
REGULAR LENGTH
2-3/8"
3-1/4"
#0 - 1/4"
1/4" - 1/2"
ROUND
13/16" OD
1"
1-1/2"
2"
6-1/4"
9"
14"
23"
DS63001
DS63002
DS63003
DS63004
12-15/16"
12-1/16"
TH63026
TH63027
2-1/2"
3"
4"
26"
22"
29"
DS63005
DS63006
DS63007
1 per pack
HEX
T-HANDLE TAP WRENCH
WITH RATCHET
9"
12"
1" A.F.
1-7/16" A.F.
DSH63008
DSH63009
1 per pack
ADJUSTABLE TAP / REAMER WRENCH
TH63024RL
NEW!
TAP SIZE
OVERALL
LENGTH
STOCK #
REGULAR REACH
#0 - 1/4"
1/4" - 1/2"
3-3/8"
4-3/8"
TH63022R
TH63024R
EXTRA-CAPACITy
1/2" - 5/8"
4-1/4"
9-1/2"
11-3/8"
TH63022RL
TH63024RL
TW63011
TW63012
TW63013
TW63014
TW63015A
TW63015
TW63016
TW63017
B
THREAD PITCH GAGES
• Blades are of a narrow leaf design to
permit their use in determining pitch for
inside as well as outside screw threads .
• Each blade marked with
proper thread size .
• Locking device at each end .
NO. OF BLADES
TPI RANGE
STOCK #
51
28
22
28
4 - 84
4 - 80
9 - 40
0.25 - 2.50 mm
TPG63041
TPG63042
TPG63043
TPG63044
GUIDE
1 per pack
TH65033
Unified 60O
TAP SIZE
OVERALL
LENGTH
STOCK #
0 - 1/4"
1/4" - 1/2"
1/2" - 3/4"
3-1/4"
4"
4-1/4"
TH65031
TH65032
TH65033
1 per pack
7"
8"
11"
15"
17"
19"
31"
40"
STOCK #
Features:
T-HANDLE TAP WRENCH
WITH GUIDE
• Manually threads straight tap
holes without removing the
workpiece from the machine .
• Guide spindle inserts into
drill press or lathe chuck .
• Tap wrench works its way out of the
guide to easily gauge thread depth .
OVERALL
LENGTH
#0
#0 - 1/4"
#4
#0 - 3/8"
#5
#7 - 1/2", 1/8" NPT
#6
#7 - 3/4", 1/4" NPT
#7
1/4" - 1", 3/4" NPT
#7
1/4" - 1-1/8", 3/4" NPT
#7-1/2
1/2" - 1-3/8", 1/4" - 1" NPT
#8
3/4" - 1-5/8", 3/8" - 1-1/4" NPT
TH63025R
1 per pack
Features:
CAPACITy
1 per pack
LONG REACH
5/32" - 1/4"
1/4" - 1/2"
SIZE
#
TH63024R
Tapping Tools & Accessories
TH63021
TH63024
LONG REACH
5/32" - 1/4"
1/4" - 1/2"
STOCK #
Unified 60O
Unified 60O
Metric
Gauge
Pitch Gage Range
51 Blades included: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2,
12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36,
38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70,
72, 74, 76, 78, 80, 82 & 84
28 Blades included: 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13
14, 16, 18, 20, 24, 27, 28, 32, 36, 40, 44, 48, 56, 64, 72 & 80
22 Blades included: 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18,
20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38 & 40
28 Blades included: .25, .30, .35, .40, .45, .50, .55, .60, .65,
.70, .75, .80, .85, .90, 1 .00, 1 .10, 1 .20, 1 .25, 1 .30, 1 .40, 1 .50,
1 .60, 1 .70, 1 .75, 1 .80, 1 .90, 2 .00 & 2 .50
B-35
Screw Extractors
Spiral & Straight Flute
Special Alloy Steel
Features: • Manufactured from rugged alloy steel .
• Ideal for handling the stress of removing broken bolts,
studs, socket screws and fittings .
• Use left hand drill as per chart below followed by screw extractor .
SPIRAL FLUTE
SCREW EXTRACTORS
STRAIGHT FLUTE
SCREW EXTRACTORS
Screw Extractors
Tapered, left hand spiral flutes grip screws firmly .
B
SCREW
EXTRACTOR
SIZE #
USE
DRILL
SIZE
1
2
3
4
5
6
7*
8*
9*
5/64"
7/64"
5/32"
1/4"
17/64"
13/32"
17/32"
13/16"
1-1/16"
REMOVES
BOLT / SCREW
SIZE
3/32" to 5/32"
5/32" to 7/32"
7/32" to 9/32"
9/32" to 3/8", 1/8" Pipe
3/8", to 5/8", 1/4" Pipe
5/8" to 7/8", 3/8" Pipe
7/8" to 1-1/8", 1/2" Pipe
1-1/8" to 1-3/8", 3/4" Pipe
1-3/8" to 2", 1" Pipe
Bulk # 1 to 4, 12 per pack
# 5 to 6, 6 per pack
# 7 to 9, 1 per pack
* Made in Japan
BULK
CARDED
SCREW
EXTRACTOR
SIZE #
SE61701
SE61702
SE61703
SE61704
SE61705
SE61706
SE61707
SE61708
SE61709
SE61701C
SE61702C
SE61703C
SE61704C
SE61705C
SE61706C
—
—
—
1
2
3
4
5
6
7*
8*
9*
Card # 1 to 6, 1 per card
USE
DRILL
SIZE
REMOVES
BOLT / SCREW
SIZE
1/8"
3/16"
15/64"
5/16"
3/8"
15/32"
9/16"
21/32"
13/16"
1/4" to 5/16"
3/8"
7/16", 1/8" Pipe
1/2" to 9/16", 1/4" Pipe
5/8", 3/8" Pipe
3/4"
7/8", 1/2" Pipe
1" to 1-1/8", 1/2" Pipe
1-1/4" to 1-3/8", 3/4" Pipe
STRAIGHT FLUTE
SCREW EXTRACTOR SETS
IN VINYL POUCH
IN VINYL POUCH
DESCRIPTION
STOCK #
STOCK #
SE61721
SE61722
SE61723
SE61724
SE61725
SE61726
SE61727
SE61728
SE61729
Bulk # 1 to 4, 12 per pack * Made in Japan Card # 1 to 6, 1 per card
# 5 to 6, 6 per pack
# 7 to 9, 1 per pack
SPIRAL FLUTE
SCREW EXTRACTOR SETS
NO. OF
PIECES
NO. OF
PIECES
DESCRIPTION
STOCK #
5 Pc.
Spiral Flute Sizes:
1, 2, 3, 4, 5
SE61715
5 Pc.
Straight Flute Sizes:
1, 2, 3, 4, 5
SE61735
6 Pc.
Spiral Flute Sizes:
1, 2, 3, 4, 5, 6
SE61716
6 Pc.
Straight Flute Sizes:
1, 2, 3, 4, 5, 6
SE61736
1 per pack
1 per pack
SPIRAL FLUTED SCREW
EXTRACTOR PAIRED WITH
HSS LEFT HAND DRILL
10 PC. SPIRAL FLUTE
SCREW EXTRACTOR &
DRILL SET
ON A HANGUP CARD
IN METAL INDEX CASE
No more guesswork! Get the appropriate HSS
Left Hand Drill paired with the Screw Extractor .
SCREW
EXTRACTOR
SIZE #
LEFT HAND
DRILL
SIZE
STOCK #
#1
#2
#3
#4
#5
#6
5/64"
7/64"
5/32"
1/4"
19/64"
13/32"
SE61741C
SE61742C
SE61743C
SE61744C
SE61745C
SE61746C
1 pair per card
B-36
Straight flutes provide maximum bite .
STOCK #
Five most used spiral fluted screw extractors are matched
with HSS left hand drills, in a metal index case .
NO. OF
PIECES
10 Pc.
1 per pack
DESCRIPTION
Screw Extractor Sizes:
1, 2, 3, 4, 5
L .H . Drill Sizes:
5/64", 7/64", 5/32", 1/4", 19/64"
STOCK #
SE61747
Tap Extractors
Features: • Hardened steel fingers fit in the flutes
of broken taps for easy removal .
• Will not damage threads .
• Fits both NC and NF taps .
MACHINE SCREW,
FRACTIONAL & METRIC
TAP SIZE
(3mm)
(3 .2mm)
(3 .5mm)
(4mm)
(5mm)
(5 .5mm)
(6mm)
(8mm)
(9mm - 10mm)
(11mm)
(12mm)
(14mm)
(16mm)
(18mm)
(20mm)
(22mm)
(25mm)
STOCK #
3-FLUTE
2-FLUTE
—
—
TE10064
TE10084
TE10104
TE10124
TE10254
TE10314
TE10374
TE10434
TE10504
TE10564
TE10624
TE10684
TE10754
TE10874
TE11004
TE10043
TE10053
TE10063
TE10083
TE10103
TE10123
TE10253
TE10313
TE10373
TE10433
TE10503
TE10563
TE10623
—
TE10753
TE10873
TE11003
TE10042
TE10052
TE10062
TE10082
TE10102
TE10122
TE10252
TE10312
TE10372
TE10432
TE10502
—
—
—
—
—
—
1 . Remove chips . Apply gentle
pressure to position extractor
fingers in the flutes of the
broken tap .
1
2 . Push on the holder to
bring it into contact with
the broken tap . Slide the
sleeve down to make
contact with the work .
2
3 . Using a tap wrench, twist the
square end of the holder back
and forth . Once the tap is
loose, back it out of the hole .
3
1 per pack
• 4 Flute style normally supplied unless otherwise specified .
Tap Extensions
Special Alloy Steel
Tap Extractors • Tap Extensions
#4
#5 (1/8)
#6
#8
#10 (3/16)
#12
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
7/8"
1"
4-FLUTE
B
STyLE B - 8" OAL
STyLE A - 5" OAL
For machine and hand tapping.
Features:
For hand tapping only.
Features:
• Manufactured from alloy steel heat treated for
strength and durability .
• Usable for hand tapping in close quarters where
it is difficult or impossible to turn a tap wrench .
• Supplied in paired sets . Each piece 5" long . Pieces
may be combined to achieve 10" length extension .
MACHINE SCREW & FRACTIONAL
TAP
SIZE
SHANK
SQUARE
OF TAP
TAP
SHANK
DIA.
STOCK #
#10 (3/16")
1/4"
5/16"
3/8" ( .206 sq .)
3/8" ( .286 sq .)
7/16"
1/2"
5/8"
.152 sq .
.191 sq .
.238 sq .
.206 sq .
* .286 sq .
.242 sq .
.275 sq .
.360 sq .
.154 sq .
.193 sq .
.242 sq .
.210 sq .
* .290 sq .
.246 sq .
.279 sq .
.364 sq .
TE45010
TE45025
TE45031
TE45037
TE45038
TE45043
TE45050
TE45062
1 pair per pack
* 3/8" ( .286 sq .) size is more frequently used than
the 3/8" ( .206 sq .) size . Specify which is required .
• Provides easy access for hard-to-reach tapping
applications . Small socket end allows the extension
to pass through standard liner bushings .
• Deep socket of the extension and two socket set
screws provide a close-fitting, secure hold .
• Each extension designed for a specific tap size .
Square and round sockets available .
• Suitable for repeated use, unlike special length taps .
MACHINE SCREW & FRACTIONAL
NEW!
TAP
SIZE
SHANK
SQUARE
OF TAP
TAP
SHANK
DIA.
SHANK
DIA.
OF TAP
STOCK #
0-6
8
10 (3/16)
12
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1"
.191 sq .
.191 sq .
.191 sq .
.164 sq .
.191 sq .
.237 sq .
.285 sq .
.241 sq .
.274 sq .
.359 sq .
.441 sq .
.522 sq .
.599 sq .
.250 sq .
.250 sq .
.312 sq .
.312 sq .
.375 sq .
.437 sq .
.500 sq .
.500 sq .
.500 sq .
.625 sq .
.750 sq .
.906 sq .
1 .000 sq .
.142 sq .
.169 sq .
.195 sq .
.220 sq .
.256 sq .
.319 sq .
.382 sq .
.240 sq .
.368 sq .
.481 sq .
.591 sq .
.698 sq .
.801 sq .
TE40006
TE40008
TE40010
TE40012
TE40025
TE40031
TE40037
TE40043
TE40050
TE40062
TE40075
TE40087
TE40100
1 per pack
B-37
Solid Screw Inserts
Carbon Steel
ALFA LOK Inserts will not back out or vibrate loose
Immediately on installation, micro-encapsulated adhesive begins to set, and the newly installed inserts can be
fastened within minutes . The adhesive continues to set overnight until completely set . The adhesive seals
against all liquids and gases to a pressure of 6,000 psi when fully cured and bonds to virtually all metals .
Easy Removal
Use a standard screw and bolt extractor to back out a damaged insert and then replace it with a
new insert . Removal is simply a matter of overcoming the resistance to torque-out which has been
produced by the threadlocking material .
COARSE THREAD
Solid Screw Inserts
INTERNAL
THREAD
1. Drill with standard drill
EXTERNAL
THREAD
LENGTH
TAP DRILL
SIZE
4-40
6-32
8-32
10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
5/8-11
3/4-10
7/8-9
1-8
10-32
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-1/4 - 7
1-3/8 - 12
.250
.280
.290
.406
.437
.484
.515
.656
.656
.656
.687
1 .125
.781
1 .125
1 .250
5/32
7
F
5/16
23/64
27/64
31/64
17/32
21/32
21/32
49/64
49/64
7/8
1-7/64
1-9/32
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
9/16-18
5/8-18
3/4-16
7/8-14
1-14
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
3/4-10
7/8-9
1-8
1-1/4 - 7
1-3/8 - 12
.406
.437
.484
.515
.656
.656
.656
.687
.781
1 .125
1 .250
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
1/2-13
9/16-12
5/8-11
7/8-9
1-8
.484
.515
.656
.687
.781
TAP
SIZE
MINIMUM FULL
THREAD DEPTH
STOCK #
9/32
11/32
7/16
15/32
1/2
9/16
19/32
23/32
3/4
3/4
13/16
1-1/4
7/8
1-1/8
1-3/8
SI67501
SI67502
SI67503
SI67504
SI67505
SI67506
SI67507
SI67508
SI67509
SI67510
SI67511
SI67512
SI67513
SI67514
SI67515
15/32
1/2
9/16
19/32
23/32
3/4
3/4
13/16
7/8
1-1/8
1-3/8
SI67521
SI67522
SI67523
SI67524
SI67525
SI67526
SI67527
SI67528
SI67529
SI67530
SI67531
9/16
19/32
23/32
13/16
7/8
SI67533
SI67534
SI67535
SI67536
SI67537
15/32
9/16
19/32
19/32
3/4
13/16
7/8
SIM67541
SIM67542
SIM67543
SIM67544
SIM67545
SIM67546
SIM67547
10-32
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
3/4-10
7/8-9
7/8-9
1-8
1-1/4 - 7
1-3/8 - 12
FINE THREAD
B
2. Tap hole with standard tap
5/16
23/64
27/64
31/64
17/32
21/32
21/32
49/64
7/8
1-7/64
1-9/32
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
3/4-10
7/8-9
1-8
1-1/4 - 7
1-3/8 - 12
EXTRA HEAVY WALL
27/64
31/64
17/32
49/46
7/8
1/2-13
9/16-12
5/8-11
7/8-9
1-8
METRIC INSIDE – N. C. OUTSIDE
3. Turn ALFA LOK
home flush with bolt
M6-1 .0
M8-1 .25
M10-1 .50
M10-1 .25
M12-1 .75
M14-2 .0
M16-2 .0
3/8-16
1/2-13
9/16-12
9/16-12
3/4-10
7/8-9
1-8
.406
.484
.515
.515
.658
.687
.781
5/16
27/64
31/64
31/64
21/32
49/64
7/8
3/8-16
1/2-13
9/16-12
9/16-12
3/4-10
7/8-9
1-8
SCREW INSERT KITS
KIT RANGE
Prepackaged kits containing
a range of sizes are available.
B-38
#10 - 1/2"
UNC
1/2" - 1"
UNC
#10 - 1/2"
UNF
1/2" - 1"
UNF
M8 - M12
METRIC
CONTENTS
10 10-24
10 1/4-20
10 10-32
10 1/4-28
Bulk up to 1/2", 10 per pack
9/16" to 1", 5 per pack
6 1/2 - 13
7 5/8 - 11
6-1/2-20
7-5/8 - 18
10 M6-1 .0
10 M8-1 .25
10 5/16-18
10 3/8-16
10 5/16-24
10 3/8-24
STOCK #
6 1/2-13
7 3/4 - 10
2 1-8
7 3/4 - 16
2 1-14
10 M10-1 .5
8 M12-1 .75
M6 to M12, 10 per pack
Kits 1 per pack
M14 to M16, 5 per pack
SI67555
SI67556
6 1/2-20
SI67557
SI67558
SIM67559
Helical Thread Inserts
HELICALLY WOUND STAINLESS STEEL
FOR STRONG THREADS IN WEAK MATERIALS
COARSE • FINE • PIPE • METRIC • SPARK PLUG SIZES
NC INSERTS
LENGTH
4-40
4-40
6-32
6-32
8-32
8-32
10-24
10-24
1/4"-20
1/4"-20
5/16"-18
5/16"-18
3/8"-16
3/8"-16
7/16"-14
7/16"-14
1/2"-13
1/2"-13
5/8"-11
5/8"-11
3/4"-10
3/4"-10
7/8"-9
7/8"-9
1"-8
1"-8
0 .168
0 .224
0 .207
0 .276
0 .246
0 .328
0 .285
0 .380
0 .375
0 .500
0 .468
0 .624
0 .563
0 .750
0 .657
0 .876
0 .750
1 .000
0 .938
1 .250
1 .125
1 .500
1 .313
1 .750
1 .500
2 .000
No . 31
No . 25
11/64
13/64
17/64
21/64
25/64
29/64
17/32
21/32
25/32
29/32
1-1/32
METRIC COARSE INSERTS
STOCK #
SIZE
LENGTH
TI66210
TI66210B
TI66212
TI66212B
TI66214
TI66214B
TI66216
TI66216B
TI66220
TI66220B
TI66222
TI66222B
TI66224
TI66224B
TI66226
TI66226B
TI66228
TI66228B
TI66230
TI66230B
TI66232
TI66232B
TI66234
TI66234B
TI66236
TI66236B
M6-1
M6-1
M8-1.25
M8-1.25
M10-1.5
M10-1.5
M12-1.75
M12-1.75
M14-2
M14-2
M16-2
M16-2
M18-2.5
M18-2.5
M20-2.5
M20-2.5
M22-2.5
M22-2.5
M24-3
M24-3
9 .00
12 .00
12 .00
16 .00
15 .00
20 .00
18 .00
24 .00
21 .00
28 .00
24 .00
32 .00
27 .00
36 .00
30 .00
40 .00
33 .00
44 .00
36 .00
48 .00
LENGTH
4-48
4-48
6-40
6-40
8-36
8-36
10-32
10-32
1/4"-28
1/4"-28
5/16"-24
5/16"-24
3/8"-24
3/8"-24
7/16"-20
7/16"-20
1/2"-20
1/2"-20
5/8"-18
5/8"-18
3/4"-16
3/4"-16
7/8"-14
7/8"-14
1"-12
1"-12
1"-14
1"-14
0 .168
0 .224
0 .207
0 .276
0 .246
0 .328
0 .285
0 .380
0 .375
0 .500
0 .468
0 .624
0 .563
0 .750
0 .657
0 .876
0 .750
1 .000
0 .938
1 .250
1 .125
1 .500
1 .313
1 .750
1 .500
2 .000
1 .500
2 .000
DRILL
SIZE
No . 31
No . 26
11/64
13/64
17/64
21/64
25/64
29/64
33/64
41/64
49/64
57/64
1-1/64
1-1/64
• Repairs damaged threaded holes .
• Reinforces threads which may be
subject to failure .
• Usable on cast iron, steel, copper,
aluminum, zinc, magnesium, most
plastic compounds & wood .
• Meets or exceeds most applicable
specifications, including MS122076
series, 124651 series, 21208,
21209, 33537, mll-1 8846 and
mll-F-5577 .
• Easy way to change from inch to
metric threads .
NF INSERTS
SIZE
APPLICATIONS:
STOCK #
TI66211
TI66211B
TI66213
TI66213B
TI66215
TI66215B
TI66217
TI66217B
TI66221
TI66221B
TI66223
TI66223B
TI66225
TI66225B
TI66227
TI66227B
TI66229
TI66229B
TI66233
TI66233B
TI66235
TI66235B
TI66237
TI66237B
TI66239
TI66239B
TI66241
TI66241B
10 per pack
Alfa Tools inserts are made of stainless
steel with diamond cross section.
They are interchangeable with Helicoil
and all other brands.
• Provides stronger more efficient
threads .
STI TAPS
NC / NF / METRIC
See Page B41
NPT INSERTS
SIZE
LENGTH
DRILL
SIZE
STOCK #
6 .3
TI66243
TI66243B
TI66244
TI66244B
TI66247
TI66247B
TI66250
TI66250B
TI66252
TI66252B
TI66254
TI66254B
TI66256
TI66256B
TI66258
TI66258B
TI66260
TI66260B
TI66262
TI66262B
8 .3
10 .4
12 .5
14 .5
16 .5
18 .8
20 .8
22 .8
24 .8
METRIC FINE INSERTS
SIZE
LENGTH
M8-1
M8-1
M10-1.25
M10-1.25
M10-1
M10-1
M12-1.25
M12-1.25
M12-1.5
M12-1.5
M14-1.5
M14-1.5
M16-1.5
M16-1.5
M18-2
M18-2
M18-1.5
M18-1.5
M20-2
M20-2
M20-1.5
M20-1.5
M22-2
M22-2
M22-1.5
M22-1.5
M24-2
M24-2
12 .00
16 .00
15 .00
20 .00
15 .00
20 .00
18 .00
24 .00
18 .00
24 .00
21 .00
28 .00
24 .00
32 .00
27 .00
36 .00
27 .00
36 .00
30 .00
40 .00
30 .00
40 .00
33 .00
44 .00
33 .00
44 .00
36 .00
48 .00
DRILL
SIZE
8 .3
10 .3
10 .3
12 .3
12 .3
14 .3
16 .5
18 .5
18 .5
20 .5
20 .5
22 .5
22 .5
24 .5
STOCK #
TI66263
TI66263B
TI66265
TI66265B
TI66267
TI66267B
TI66271
TI66271B
TI66269
TI66269B
TI66273
TI66273B
TI66275
TI66275B
TI66277
TI66277B
TI66279
TI66279B
TI66281
TI66281B
TI66283
TI66283B
TI66285
TI66285B
TI66287
TI66287B
TI66289
TI66289B
B
SPARK PLUG INSERTS
STOCK #
SIZE
LENGTH
M10-1
M10-1
M12-1.25
M12-1.25
M14-1.25
M14-1.25
M14-1.25
M14-1.25
M14-1.25
M18-1.5
0 .339
1/2"
1/2"
3/4"
3/8"
0 .472
7/16"
1/2"
3/4"
1/2"
1/8"- 27
0 .188
3/8
TI66340
1/4"- 18
0 .375
33/64
TI66341
3/8"- 18
0 .668
21/32
TI66342
1/2"- 14
0 .750
13/16
TI66343
3/4"- 14
1 .125
1-1/64
TI66344
1"- 11-1/2
1 .500
1-9/32
TI66345
10 per pack
DRILL
SIZE
Helical Thread Inserts
SIZE
DRILL
SIZE
10 per pack
DRILL
SIZE
10 .3
12 .3
14 .25
18 .5
STOCK #
TI66290
TI66290A
TI66291
TI66291B
TI66293
TI66293A
TI66293B
TI66293C
TI66293D
TI66294
B-39
Helical Thread Repair Kits
How to use Insert-A-Thread
1. DRILL
Drill to clear out
the damaged
thread (if
necessary) .
2. TAP
Thread with STI
tap supplied
with the kit .
Helical Thread Repair Kits
NC
REPAIR KITS
4. TANG REMOVAL
Remove tool and place back on
top of tang . Tap down on tool
sharply . Do not try to twist tang
off . For spark plug and large fine
thread inserts, use long nose
pliers and pull tang out .
NPT
REPAIR KITS
METRIC COARSE
REPAIR KITS
SIZE
INSERT
LENGTH
NO. OF
INSERTS
STOCK #
SIZE
INSERT
LENGTH
NO. OF
INSERTS
STOCK #
SIZE
INSERT
LENGTH
4-40
6-32
8-32
10-24
1/4"- 20
5/16"- 18
3/8"- 16
7/16"- 14
1/2"- 13
5/8"- 11
3/4"- 10
7/8"- 9
1"- 8
0 .168
0 .207
0 .246
0 .285
0 .375
0 .468
0 .563
0 .657
0 .750
0 .938
1 .125
1 .313
1 .500
10
10
10
10
10
5
5
5
5
5
5
5
5
TI66210K
TI66212K
TI66214K
TI66216K
TI66220K
TI66222K
TI66224K
TI66226K
TI66228K
TI66230K
TI66232K
TI66234K
TI66236K
M6-1
M8-1.25
M10-1.5
M12-1.75
M14-2
M16-2
M18-2.5
M20-2.5
M22-2.5
M24-3
9 .00
12 .00
15 .00
18 .00
21 .00
24 .00
27 .00
30 .00
33 .00
36 .00
10
5
5
5
5
5
5
5
5
5
TI66243K
TI66244K
TI66247K
TI66250K
TI66252K
TI66254K
TI66256K
TI66258K
TI66260K
TI66262K
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1" - 11-1/2
0 .188
0 .375
0 .668
0 .750
1 .125
1 .500
M8-1
M10-1.25
M10-1
M12-1.5
M12-1.25
M14-1.5
M16-1.5
M18-2
M18-1.5
M20-2
M20-1.5
M22-2
M22-1.5
M24-2
4-48
6-40
8-36
10-32
1/4"- 28
5/16"- 24
3/8"- 24
7/16"- 20
1/2"- 20
5/8"- 18
3/4"- 16
7/8"- 14
1"- 12
1"- 14
0 .168
0 .207
0 .246
0 .285
0 .375
0 .468
0 .563
0 .657
0 .750
0 .938
1 .125
1 .313
1 .500
1 .500
10
10
10
10
10
5
5
5
5
5
5
5
5
5
TI66211K
TI66213K
TI66215K
TI66217K
TI66221K
TI66223K
TI66225K
TI66227K
TI66229K
TI66233K
TI66235K
TI66237K
TI66239K
TI66241K
12 .00
15 .00
15 .00
18 .00
18 .00
21 .00
24 .00
27 .00
27 .00
30 .00
30 .00
33 .00
33 .00
36 .00
5
5
5
5
5
5
5
5
5
5
5
5
5
5
NEW!
NO. OF
INSERTS
STOCK #
10
10
5
5
5
5
TI65000K
TI65001K
TI65002K
TI65003K
TI65004K
TI65005K
SPARK PLUG REPAIR KITS
M10-1
M12-1.25
METRIC FINE REPAIR KITS
NF REPAIR KITS
B
3. INSTALL
Wind insert in with light
downward pressure until
1/4 to 1/2 turn below
the surface, driving tang
towards the bottom of
the hole .
TI66263K
TI66265K
TI66267K
TI66269K
TI66271K
TI66273K
TI66275K
TI66277K
TI66279K
TI66281K
TI66283K
TI66285K
TI66287K
TI66289K
M14-1.25
M18-1.5
1/2"
10
TI66290K
1/2"
10
TI66291BK
3/4"
10
TI66291AK
3/8"
5
TI66293K
3/4"
5
TI66293DK
1/2"
5
TI66294K
Each Kit Includes:
Inserts, Insertion
Tool & STI Tap
1 kit per pack
RANGE REPAIR KITS
• Each kit contains a tap and installation tool for the given size .
UNC RANGE
SIZE
INSERT
LENGTH
INSERTS
PER KIT
1/4"- 20
5/16"- 18
3/8"- 16
7/16"- 14
1/2"- 13
0 .375
0 .468
0 .563
0 .657
0 .750
10
5
5
5
5
UNF RANGE
STOCK #
SIZE
INSERT
LENGTH
INSERTS
PER KIT
TIK66597
1/4"- 28
5/16"- 24
3/8"- 24
7/16"- 20
1/2"- 20
0 .375
0 .468
0 .563
0 .657
0 .750
10
5
5
5
5
METRIC RANGE
STOCK #
SIZE
INSERT
LENGTH
INSERTS
PER KIT
STOCK #
TIK66598
M6-1
M8-1
M8-1.25
M10-1.5
M12-1.75
9 .00
12 .00
12 .00
15 .00
18 .00
5
5
5
5
5
TIK66599
INSTALLATION TOOLS
UNC
THREADS
METRIC COARSE
THREADS
THREAD SIZE
STOCK #
THREAD SIZE
STOCK #
THREAD SIZE
STOCK #
4-40
6-32
8-32
10-24
1/4"- 20
5/16"- 18
3/8"- 16
7/16"- 14
1/2"- 13
5/8"- 11
3/4"- 10
7/8"- 9
1"- 8
TI66314
TI66315
TI66316
TI66317
TI66318
TI66319
TI66320
TI66321
TI66322
TI66323
TI66324
TI66325
TI66326
4-48
6-40
8-36
10-32
1/4"- 28
5/16"- 24
3/8"- 24
7/16"- 20
1/2"- 20
5/8"- 18
3/4"- 16
7/8"- 14
1"- 12
1"- 14
TI66314
TI66315
TI66316
TI66317
TI66318
TI66328
TI66329
TI66321
TI66322
TI66323
TI66330
TI66325
TI66326
TI66326
M6-1
M8-1.25
M10-1.5
M12-1.75
M14-2
M16-2
M18-2.5
M20-2.5
M22-2.5
M24-3
TI66318
TI66328
TI66320
TI66322
TI66331
TI66323
TI66324
TI66330
TI66325
TI66326
1 per pack
B-40
UNF
THREADS
METRIC FINE
THREADS
THREAD SIZE
M8-1
M10-1.25
M10-1
M12-1.5
M12-1.25
M14-1.25S/P
M14-1.5
M16-1.5
M18-2
M18-1.5
M20-2
M20-1.5
M22-2
M22-1.5
M24-2
NPT
THREADS
STOCK #
THREAD SIZE
STOCK #
TI66328
TI66329
TI66329
TI66322
TI66322
TI66332
TI66332
TI66323
TI66324
TI66324
TI66330
TI66330
TI66325
TI66325
TI66326
1/8"- 27
1/4"- 18
3/8"- 18
1/2"- 14
3/4"- 14
1" - 11-1/2
TI66329
TI66331
TI66323
TI66325
TI66333
TI66334
Screw Thread Insert (STI) Taps
Premium High-Speed Steel
Features: • Can be used by hand or under power .
Special Taps For Helical Coil
Thread Inserts (Plug Style)
• Produces threads to accommodate helical screw thread inserts .
• General purpose over size taps
INCH SIZES
STI
SIZE
METRIC
DRILL
SIZE
STOCK #
#31
#31
#28
#25
#25
11/64"
#17
13/64"
13/64"
#1
ST66507
ST66508
ST66509
ST66511
ST66512
ST66513
ST66514
ST66515
ST66516
ST66517
FRACTIONAL
1/4" - 20
1/4" - 28
5/16" - 18
5/16" - 24
3/8" - 16
3/8" - 24
7/16" - 14
7/16" - 20
1/2" - 13
1/2" - 20
5/8" - 11
5/8" - 18
3/4" - 10
3/4" - 16
7/8" - 9
7/8" - 14
1" - 8
1" - 12
1" - 14
17/64"
17/64"
21/64"
21/64"
25/64"
25/64"
29/64"
29/64"
17/32"
33/64"
21/32"
41/64"
25/32"
49/64"
29/32"
57/64"
1-1/32"
1-1/64"
1-1/64"
ST66530
ST66531
ST66532
ST66533
ST66534
ST66535
ST66536
ST66537
ST66538
ST66539
ST66542
ST66542A
ST66546
ST66547
ST66548
ST66548A
ST66549
ST66549A
ST66549B
DRILL
SIZE
STOCK #
M5 x .8
M6 x 1.0
M8 x 1.0
M8 x 1.25
M9 x 1.25
M10 x 1.0
M10 x 1.25
M10 x 1.50
M11 x 1.25
M11 x 1.50
M12 x 1.25
M12 x 1.50
M12 x 1.75
M14 x 1.25
M14 x 1.50
M14 x 2.0
M16 x 1.50
M16 x 2.00
M18 x 1.50
M18 x 2.0
M18 x 2.50
M20 x 1.50
M20 x 2.0
M20 x 2.50
M22 x 1.50
M22 x 2.0
M22 x 2.5
M24 x 2.0
M24 x 3.0
5 .2
6 .3
8 .3
8 .3
9 .25
10 .3
10 .3
10 .4
11 .00
11 .00
12 .2
12 .25
12 .50
14 .30
14 .30
14 .50
16 .25
16 .50
18 .25
18 .50
18 .50
20 .25
20 .50
20 .50
22 .50
22 .50
22 .50
24 .25
24 .75
ST66550
ST66551
ST66552A
ST66552
ST66553
ST66554A
ST66554
ST66555
ST66556
ST66557
ST66558
ST66559
ST66560
ST66561A
ST66561
ST66562
ST66563
ST66564
ST66565
ST66566A
ST66566
ST66567
ST66568A
ST66568
ST66569
ST66570
ST66571A
ST66571
ST66572
Screw Thread Insert (STI) Taps
MACHINE SCREW SIZES
4 - 40
4 - 48
5 - 40
6 - 32
6 - 40
8 - 32
8 - 36
10 - 24
10 - 32
12 - 24
STI
SIZE
B
1 per pack
1 per pack
TAPER PIPE TAPS (NPT)
STI
SIZE
DRILL
SIZE
1/8" - 27
1/4" - 18
3/8" - 18
1/2" - 14
3/4" - 14
1" - 11-1/2
Q
7/16
9/16
45/64
29/32
1-9/64
DECIMAL
EQUIV.
NEW!
STOCK #
FRACTIONAL
0 .3320
0 .4375
0 .5625
0 .7031
0 .9062
1 .1406
STNPT66591
STNPT66592
STNPT66593
STNPT66594
STNPT66595
STNPT66596
1 per pack
B-41
Tap & Die Sets
Available in Fractional, Metric or Combination Sets
NC = Coarse
NF = Fine
NPT = Pipe
MM = Metric
12 PC. PIPE TAP & RETHREADING
HEXAGON DIE SET
IN METAL CASE
STOCK #
STEEL
NO. OF
PIECES
SET INCLUDES
TDS66012NPT
HIGH CARBON
12
6 NPT Pipe Taps, and
6 NPT Rethreading Hexagon Dies
Size and threads per inch (NPT sizes)
1/8-27, 1/4-18, 3/8-18, 1/2-14, 3/4-14, 1-11-1/2
TDS66012NPT
6 PC. PIPE TAP SET
Tap & Die Sets
IN WOOD CASE
STOCK #
STEEL
NO. OF
PIECES
TDS66006NPT
HIGH CARBON
6
NEW!
SET INCLUDES
6 NPT Pipe Taps
Size and threads per inch (NPT sizes)
1/4-18, 3/8-18, 1/2-14, 3/4-14, 1-11-1/2, 1-1/4-1-1/2
TDS66006NPT
B
12 PC. TAP & ADJ. ROUND DIE SET
IN METAL CASE
STOCK #
STEEL
NO. OF
PIECES
TDS66012
HIGH CARBON
12
Size and threads per inch (Fractional sizes)
NC 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13
SET INCLUDES
5
5
1
1
Plug Taps,
Adj . 1" O .D . Round Dies,
Die Stock 1" O .D . and
T-Handle Tap Wrench 1/8" - 1/2"
TDS66012
22 PC. TAP & ADJ. ROUND DIE SET
IN METAL CASE
STOCK #
TDS66022
STEEL
NO. OF
PIECES
HIGH CARBON
22
Size and threads per inch (Fractional sizes)
NC 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13
NF 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20
TDS66022
B-42
SET INCLUDES
10 Plug Taps,
10 Adj . 1" O .D . Round Dies,
1 Die Stock 1" O .D . and
1 T-Handle Tap Wrench 1/8" - 1/2"
Tap & Die Sets - Cont.
Available in Fractional, Metric or Combination Sets
NC = Coarse
NF = Fine
NPT = Pipe
MM = Metric
24 PC. METRIC TAP & ADJ. ROUND DIE SET
IN METAL CASE
STOCK #
STEEL
NO. OF
PIECES
TDS24MC
HIGH CARBON
24
TDS24MH
HIGH-SPEED
24
SET INCLUDES
11 Plug Taps,
11 Adj . 2" O .D . Round Dies,
1 Die Stock 2" O .D . and
1 Adj . Tap Wrench
Metric sizes: M6 - M20, 1 each tap, 1 each die
6mm x 1 .00, 7 x 1 .00, 8 x 1 .25, 9 x 1 .25, 10 x 1 .50, 11 x 1 .50,
12mm x 1 .75, 14 x 2 .00, 16 x 2 .00, 18 x 2 .50, 20 x 2 .50
TDS24MC
Tap & Die Sets
40 PC. POPULAR MECHANIC’S TAP & DIE SETS –
SAE OR METRIC
WITH HEXAGON DIES IN A DOUBLE TRAY PLASTIC CASE
TDS40H (HSS)
STOCK #
STEEL
NO. OF
PIECES
NEW!
TDS40C
(SAE)
HIGH CARBON
40
NEW!
TDS40CM
(METRIC)
HIGH CARBON
40
NEW!
TDS40H
(HSS)
HIGH-SPEED
40
SET INCLUDES
17 Plug Taps, 17 - 1" Hexagon Dies,
1 Hexagon Die Stock 1",
2 T Handle Tap Wrenches:
0 to 1/4" & 1/4" to 1/2",
1 Adjustable Tap Wrench 0 -1",
1 Screwdriver and 1 Pitch Gauge .
B
SAE Set size and threads per inch (Machine Screw & Fractional sizes)
4-40, 6-32, 8-32, 10-24, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13
NC
NF
10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20
NPT
1/8-27
Metric Tap and Die sizes
3mm-0 .5
3mm-0 .6
4mm-0 .7
4mm-0 .75
5mm-0 .8
5mm-0 .9
6mm-0 .75
6mm-1 .00
7mm-1 .00
7mm-0 .75
8mm-1 .00
8mm-1 .25
10mm-1 .25
10mm-1 .50
12mm-1 .50
12mm-1 .75
1/8" Pipe Tap
45 PC. TAP & DIE SET – METRIC
WITH ADJUSTABLE SPLIT ROUND DIES IN A METAL CASE
STOCK #
STEEL
NO. OF
PIECES
TDS66045C
HIGH CARBON
TOOL STEEL
45
Metric Tap (Plug) and Die sizes
6mm-1 .00
6mm-0 .75
8mm-1 .25
8mm-1 .00
10mm-1 .50
10mm-1 .25
12mm-1 .75
12mm-1 .50
14mm-2 .00
14mm-1 .50
16mm-2 .00
16mm-1 .50
NEW!
SET INCLUDES
20 Plug Taps, 20 Adj . Round Dies,
2 Die Stock 1" & 2" O .D .,
2 Tap Wrenches: #5, #7, 1 Screwdriver .
18mm-2 .25
18mm-1 .50
20mm-2 .50
20mm-1 .50
22mm-2 .25
22mm-1 .50
24mm-3 .00
24mm-1 .50
TDS66045C
B-43
Tap & Die Sets - Cont.
Available in Fractional or Combination Sets
NC = Coarse
NF = Fine
NPT = Pipe
MM = Metric
64 PC. SUPER TAP AND DIE SET
IN METAL CASE
Tap & Die Sets
TDS66064H
STOCK #
STEEL
NO. OF
PIECES
TDS66064H
HIGH SPEED
64
TDS66064C
HIGH CARBON
64
SET INCLUDES
28 Plug Taps with:
17 Adjustable 1" O .D . Round Dies,
7 Adjustable 1-1/2" O .D . Round Dies,
4 Adjustable 2" O .D . Round Dies,
3 Die Stocks: 1" O .D ., 1-1/2" O .D .
and 2" O .D .,
1 T-Handle Tap Wrench #0-1/4,
2 Adjustable Tap Wrenches:
1/16-1/2" and 1/4-1 1/8",
1 Screw Driver & 1 Screw Pitch Gauge
Size and threads per inch (Machine Screw & Fractional sizes)
NC
4-40, 6-32, 8-32, 10-24, 12-24,1/4-20, 5/16-18, 3/8-16,
7/16-14, 1/2-13, 9/16-12, 5/8-11, 3/4-10, 7/8-9, 1-8
NF
10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16-18,
5/8-18, 3/4-16, 7/8-14, 1 -14(NS)
NPT 1/8-27, 1/4-18
60 PC. COMBINATION SAE & METRIC SET
WITH HEXAGON DIES IN METAL CASE
STOCK #
NO. OF
PIECES
STEEL
SET INCLUDES
17 Plug Taps & Hexagon Dies SAE
10 Plug Taps & Hexagon Dies METRIC
TDS66060
HIGH CARBON
60
Hexagon Die stock 1", T-Handle
Tap Wrench, Adjustable Tap Wrench 0-1",
Screw Driver, Thread Gauge Inch & Metric .
Size and threads per inch (Machine Screw, Fractional & Metric sizes)
SAE NC 4-40, 6-32, 8-32, 10-24, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13
NF 10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20
NPT 1/8-27
Metric 3mm-0 .5, 4mm-0 .7, 5mm-0 .8, 6mm-1 .0, 7mm-1 .0, 8mm-1 .25, 9mm-1 .25,
10mm-1 .5, 10mm-1 .0, 12mm-1 .75
B
TDS66060
110 PC. TAP & DIE SET - SAE & METRIC
WITH ROUND DIES IN A METAL CASE
STOCK #
TDS66110
STEEL
HIGH CARBON
ALLOY STEEL
NO. OF
PIECES
110
SET INCLUDES
24 Plug Taps & Dies SAE,
2 Plug Taps & Dies NPT,
9 Plug Taps & Dies METRIC,
2 Die Stacks 1", 1-1/2" O .D .,
2 Tap Wrenches #6 and #8,
T-Handle Tap Wrench,
Taps: Taper & Bottoming Chamfer (70 Pcs .)
Dies: (35 Pcs .)
Size and threads per inch (NC, NF, NPT & Metric sizes)
4-40, 6-32, 8-32, 10-24, 12-24, 1/4-20, 1/4-24, 1/4-32, 5/16-18,
3/8-16, 7/16-14, 1/2-13, 9/16-12, 5/8-11, 3/4-10
NF
10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16-18, 5/8-18, 3/4-16
NPT 1/8-27, 1/4-18
Metric 6mm-1 .0, 8mm-1 .25, 10mm-1 .5, 10mm-1 .0, 11mm-1 .5, 12mm-1 .25,
12mm-1 .75, 14mm-1 .25, 18mm-1 .5
SAE NC
TDS66110
B-44
NEW!
Hexagon Rethreading Dies Sets In Wood Cases
High Carbon Steel
TDS8C
TDS5C
TDS20
LEFT HAND DIE SET
1 die each size
NO. OF
PIECES
DESCRIPTION
1 die each size
STOCK #
NO. OF
PIECES
DESCRIPTION
STOCK #
5 pc.
NC – 1/4-20, 5/16-18, 3/8-16,
7/16-14, 1/2-13
TDS5C
5 pc.
NC – 1/4-20, 5/16-18, 3/8-16,
7/16-14, 1/2-13
TDS5LC
5 pc.
NF – 1/4-28, 5/16-24, 3/8-24,
7/16-20, 1/2-20
TDS5F
5 pc.
NF – 1/4-28, 5/16-24, 3/8-24,
7/16-20, 1/2-20
TDS5LF
8 pc.
NC – 1/4-20, 5/16-18, 3/8-16, 7/16-14,
1/2-13, 9/16-12, 5/8-11, 3/4-10
TDS8C
8 pc.
NC – 1/4-20, 5/16-18, 3/8-16, 7/16-14,
1/2-13, 9/16-12, 5/8-11, 3/4-10
TDS8LC
8 pc.
NF – 1/4-28, 5/16-24, 3/8-24, 7/16-20,
1/2-20, 9/16-18, 5/8-18, 3/4-16
TDS8F
8 pc.
NF – 1/4-28, 5/16-24, 3/8-24, 7/16-20,
1/2-20, 9/16-18, 5/8-18, 3/4-16
TDS8LF
10 pc.
NC – 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13,
9/16-12, 5/8-11, 3/4-10, 7/8-9, 1-8
TDS10C
10 pc.
NC – 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13,
9/16-12, 5/8-11, 3/4-10, 7/8-9, 1-8
TDS10LC
10 pc.
NF – 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20,
9/16-18, 5/8-18, 3/4-16, 7/8-14, 1-12
TDS10F
10 pc.
NF – 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20,
9/16-18, 5/8-18, 3/4-16, 7/8-14, 1-12
TDS10LF
20 pc.
NC/NF – 1/4-20, 1/4-28, 5/16-18, 5/16-24,
3/8-16, 3/8-24, 7/16-14, 7/16-20,
1/2-13, 1/2-20, 9/16-12, 9/16-18,
5/8-11, 5/8-18, 3/4-10, 3/4-16,
7/8-9, 7/8-14, 1-8, 1-12
20 pc.
NC/NF – 1/4-20, 1/4-28, 5/16-18, 5/16-24,
3/8-16, 3/8-24, 7/16-14, 7/16-20,
1/2-13, 1/2-20, 9/16-12, 9/16-18,
5/8-11, 5/8-18, 3/4-10, 3/4-16,
7/8-9, 7/8-14, 1-8, 1-12
TDSL20
TDS20
Hexagon Rethreading Die Sets
RIGHT HAND DIE SET
B
B-45
Tap & Drill Sets
18 Pc. Tap & Drill Index Sets
High-Speed & Carbon Steel
Inch or Metric
Features:
•
•
•
•
•
In Metal Case
NC or NF Threads
HIGH CARBON TAPS WITH HSS DRILLS
HSS TAPS WITH HSS DRILLS
STOCK #
DESCRIPTION
ALFA USA
Tap & Drill Sets
NC Plug Taps with Jobber Drills
Contains 1 ea . 6-32 tap #36 drill 8-32 #29
10-24 #25 10-32 #21 1/4"-20 #7 5/16"-18 F
3/8"-16 5/16" 7/16"-14 U 1/2"-13 27/64"
B
STOCK #
DESCRIPTION
ECO PRO
ECO PRO
NC Taps with Jobber Drills
TDSH118C
TDSH218C
Contains 1 each 6-32 tap #36 drill
10-24 #25
3/8"-16
NC HSS Plug Taps with Blitz Bit Drills
Contains 1 ea . 6-32 tap #36 drill 8-32 #29
TDSBB18NC
10-24 #25 10-32 #21 1/4"-20 #7 5/16"-18 F
3/8"-16 5/16" 7/16"-14 U 1/2"-13 27/64"
NF Plug Taps with Jobber Drills
Contains 1 ea . 6-40 tap #33 drill 8-36 #29
10-24 #25 10-32 #21 1/4"-28 #3 5/16"-24 I
3/8"-24 Q 7/16"-20 25/64 1/2"-20 29/64
Organized in a durable metal case .
Fits conveniently in any toolbox .
Isolates each tap and drill .
Prevents chipping .
Permits easy selection .
—
TDSH118F
TDSH218F
TDSBB18NF
—
10-32 #21
5/16"
8-32 #29
1/4"-20 #7 5/16"-18 F
7/16"-14 U
TDSC218C
1/2"-13 27/64"
NF Taps with Jobber Drills
Contains 1 each 6-40 tap #33 drill
10-24 #25
10-32 #21
3/8-24 Q
7/16-20 25/64
8-36 #29
1/4-28 #3 5/16-24 I
TDSC218F
1/2-20 29/64
NF HSS Plug Taps with Blitz Bit Drills
Contains 1 ea . 6-40 tap #33 drill 8-36 #29
10-24 #25 10-32 #21 1/4"-28 #3 5/16"-24 I
3/8"-24 Q 7/16"-20 25/64 1/2"-20 29/64
Metric Plug Taps with Jobber Drills
Contains 1 ea . M2 .5 x .45 #46 drill
M3 .0 x .50 #39 M3 .5 x .60 #32 M4 .0 x .70 #30 TDSH118M
M5 .0 x .80 #19 M6 .0 x 1 .0 #8 M8 .0 x 1 .25 H
M10 .0 x 1 .50 Q M12 .0 x 1 .75 13/32
TDSH218M
36 Pc. Tap & Drill
Combination Index Sets
In Metal Case
NC & NF Threads
HSS TAPS & HSS DRILLS
HIGH CARBON TAPS & HSS DRILLS
STOCK #
DESCRIPTION
ALFA USA
NC/NF Plug Taps with Jobber Drills
Contains 1 each NC 6-32 tap #36 drill
10-24 #25 12-24 #16 1/4"-20 #7 5/16"-18 F
NF 6-40 tap #33 drill
12-28 #15 1/4"-28 #3
7/16"-20 25/64
B-46
8-36 #29 10-32 #21
5/16"-24 I
1/2"-20
29/64
3/8"-24 Q
ECO PRO
NC/NF Plug Taps with Jobber Drills
Contains 1 each NC 6-32 tap #36 drill 8-32 #29
3/8"-16 5/16" 7/16"-14 U 1/2"-13 27/64 and TDSH136
STOCK #
DESCRIPTION
ECO PRO
TDSH236
10-24 #25
12-24 #16
1/4"-20 #7
3/8"-16 5/16" 7/16"-14 U
8-32 #29
5/16"-18 F
1/2"-13 27/64" and
NF 6-40 tap #33 drill
8-36 #29 10-32 #21
12-28 #15 1/4"-28 #3
5/16"-24 I
7/16"-20 25/64
1/2"-20
29/64
• ALFA USA taps and drills are manufactured in the United States .
• ECO PRO taps and drills are made outside the United States to ALFA TOOL’S specifications .
3/8"-24 Q
TDSC236
Tap Sets
High-Speed & Carbon Steel
Inch or Metric
Features:
•
•
•
•
•
In Metal Case
NC or NF Threads
Organized in a durable metal case .
Fits conveniently in any toolbox .
Isolates each tap .
Prevents chipping .
Permits easy selection .
HAND TAP SETS
Expanded
STOCK #
NO. OF
PIECES
DESCRIPTION
10 pc.
Machine Screw & Fractional Plug Taps,
1 size each:
4-40NC, 6-32NC, 8-32NC, 10-24NC,
10-32NF, 1/4-20NC, 5/16-18NC,
3/8-16NC, 1/2-13NC, 5/8-11NC
TDS66010
10 pc.
Metric Plug Taps, 1 size each:
3 x .5, 3 .5 x .6, 4 x .7, 4 .5 x .75, 5 x .8,
6 x 1 .0, 8 x 1 .25, 10 x 1 .5, 12 x 1 .75, 16 x 2 .0
TDS66011
TDS266011
10 pc.
Fractional Plug Taps, 1 size each:
1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16,
3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20
TDS66013
TDS266013
16 pc.
Machine Screw & Fractional Plug Taps,
1 size each:
1/2-20, 1/2-13, 7/16-20, 7/16-14, 3/8-24,
3/8-16, 5/16-24, 5/16-18, 1/4-28, 1/4-20,
12-28, 12-24, 10-32, 10-24, 8-32, 6-32
TDS66016
TDS266016
19 pc.
Machine Screw Plug Taps, 1 size each:
0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56
4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32
8-36, 10-24, 10-32, 12-24, 12-28
TDS66019
TDS266019
10 pc.
Machine Screw & Fractional Plug Taps,
1 size each:
4-40, 6-32, 8-32, 10-24, 10-32,
1/4-20, 5/16-18, 3/8-16, 1/2-13, 5/8-11
–
TDS266014
10 pc.
Fractional Plug Taps, 1 size each:
1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16,
3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20
–
TDS266015
13 pc.
Machine Screw & Fractional Plug Taps,
1 size each:
3/8-24, 5/16-24, 1/4-28, 10-32, 8-36, 6-40,
3/8-16, 5/16-18, 1/4-20,10-24, 8-32, 6-32,
and one 1/4" Quick Change Chuck
ALFA USA
ECO PRO
HIGH-SPEED STEEL TAP SETS
TDS266010
TDS66010
Tap Sets
B
TDS66016
CARBON STEEL SETS
HSS TAP BIT SET WITH QUICK CHANGE CHUCK
—
HST70362
HST70362
1/4" hex shanks are designed for use in power tools
with quick change chucks and adapters .
• ALFA USA taps are manufactured in the United States .
• ECO PRO taps are made outside the United States to ALFA TOOL’S specifications .
B-47
Tap Dispenser Cabinets
TOOLS NOT INCLUDED
Features:
• Cost effective tool management & storage .
• Heavy gauge steel cabinets and drawers
with vinyl dividers .
• Stackable models with full drawer extensions .
• Baked epoxy finish for long life .
TAP DISPENSER CABINETS
Dimensions: 14-5/8" W x 7-3/8" D x 7-3/4" H
Tap Dispenser Cabinets
DESCRIPTION
WEIGHT
STOCK #
13 lbs .
DIHTMS13550
10 .5 lbs .
DIHTF13500
Tap Dispenser
Machine Screw Sizes
DIHTMS13550
FOR MACHINE SCREW SIZES
2-56 12-28
Five Drawers
FOR FRACTIONAL SIZES
1/4"-20 1-14
Three Drawers
Fractional Sizes
DIHTMF13500
Metric Taps
DIHTM13575
FOR METRIC SIZES
3mm - 24mm
Three Drawers
10 .5 lbs .
DIHTM13575
Stackable
(Not Lockable)
MASTER TAP DISPENSER
B
(Four Drawers)
Dimensions: 26" W x 12" D x 12-1/2" H
DESCRIPTION
WEIGHT
STOCK #
50 lbs .
DIHTM13580
Holds NC/NF sizes in taper, plug
and bottoming chamfer
Machine screw sizes 2-56 to 12-28
Fractional sizes 1/4"-20 to 1"-14
Lockable
Master Tap
Dispenser
DIHTM13580
(Lockable)
with ball bearing slides
TAP & DRILL DISPENSER
(Three Drawers)
Dimensions: 14-5/8" W x 7-3/8" D x 7-3/4" H
• Stores and organizes correct tap drill with corresponding tap .
• Holds 1 doz . (min .) of each size .
DESCRIPTION
B-48
Tap
Drill
6-32
8-32
10-24
10-32
1/4"-20
#36
#29
#25
#21
#7
Tap
Drill
WEIGHT
Tap
STOCK #
Drill
1/4"-28 #3
7/16"-14
U
5/16"-18 F
7/16"-20 25/64" 10 .5 lbs . DIHT13590
5/16"-24 I
1/2"-13 27/64"
3/8"-16 5/16" 1/2"-20 29/64"
3/8"-24 Q
Tap & Drill Dispenser
DIHT13590
(Not Lockable)
Tap Terminology
Overall Length
Shank Length
Square
Length
Size
of
Square
Thread Length
Chamfer
Pitch
Shank
Die.
B
Center
Hole
Back Taper Equals
Pitch Dia. at “A” Minus
Pitch Dia. at “B”
Major Dia.
Pitch Dia.
Minor Dia.
Crest
Depth of
Thread
Root
Front
Flank
Lead
Angle
Concentric
Portion
Land Width
Heel
Flute
Ecentric
Portion
A
30º 30º
Rear
Flank
Hook
Angle
Concentric
Thread
Con-Ecentric
Thread
Ecentric
Thread
60º
Angle of Thread
7 to 10
Thread Chamfer
3 to 5
Thread Chamfer
1 to 2
Thread Chamfer
Interrupted Thread: A tap with an odd number of lands .
Every other tooth along the thread helix is removed .
Back Taper: A slight axial relief of the tap that makes the pitch
diameter of the thread near the shank slightly smaller than the
pitch diameter of the thread near the chamfered end .
Lead: The distance a screw thread advances axially in one
complete turn . On a single lead screw or tap, the lead and
pitch are identical . On a double lead screw or tap, the lead
is twice the pitch, and so on for higher lead screws or
taps .
Basic: The theoretical or nominal standard size from which all
variations are made .
Chamfer: The tapering of the threads at the front end of each
land . Done by cutting away and relieving the crest of the first
few teeth, which distributes the cutting action over several
teeth . When the tapering amounts to 7 to 10 threads, the tap is
called a “taper” tap; 3 to 5 threads is called a “plug” tap; and 1
to 2 threads is called a “bottoming” tap .
Chamfer Relief: The gradual decrease in height of the lands
from cutting edge to heel on the chamfered portion . Provides
clearance for the cutting action as the tap advances .
Crest: The top surface joining the two flanks of a thread . The
crest of an external thread is at its major diameter, while the
crest of an internal thread is at its minor diameter .
Cutting Face: The leading side of the land in the direction
of rotation for cutting, on which the chip impinges .
Dryseal: A pipe threaded fuel connection designed for use
where the assembled product must withstand high fluid or gas
pressures without the use of a sealing compound . Suitable for
both external and internal applications .
Flutes: Longitudinal channels formed in a tap to create cutting
edges on the thread profile . Provides chip spaces and cutting
fluid passages .
Height of Thread: The distance between the crest and the base
of a thread, measured normal to the axis .
Helical Flute: A flute with uniform axial lead and constant helix
in a helical path around the axis of a cylindrical tap .
Hook Face: A concave cutting face . Usually specified either as
chordal hook or tangenital hook .
Chordal Hook Angle: The angle between the chord passing
through the root and crest of a thread at the cutting face and a
radial line through the crest at the cutting edge .
Tangential Hook Angle: The angle between a line tangent to a
hook cutting face at the cutting edge and a radial line to the
same point .
Pitch: The distance from any point on a screw or tap
thread to a corresponding point on the next thread,
measured parallel to the axis . The pitch equals on divided
by the number of threads per inch .
Pitch Diameter: On straight threads, the pitch diameter is
the diameter of an imaginary coaxial cylinder . The surface
of this cylinder would pass through the thread profile at
points which would make the width of threads and the
width of the spaces cut by the surface of the cylinder
equal . On taper threads, the pitch diameter is the diameter
at a given distance from a reference plane perpendicular
to the axis of an imaginary coaxial cone . The surface of
this cone would pass through the thread profile at points
which would make the width of the threads and the width
of the spaces cut by the surface of the cone equal .
Tap Terminology
Angle of Thread: The angle included between the flanks of the
thread, measured in an axial plane .
B
Rake: Deviation of a straight cutting face of the tooth from
a radial line . Positive rake means the crest of the cutting
face is angularly advanced ahead of the balance of the
face of the tooth . Negative rake means the crest of the
cutting face is angularly behind the balance of the face of
the tooth . Zero rake means the cutting face is directly on
the center line .
Root: The bottom surface joining the flanks of two
adjacent threads . The root of an external thread is at its
minor diameter . The root of an internal thread is at its
major diameter .
Spiral Point: A supplemental angular fluting cut in the
cutting face of the land at the chamfer end . Slightly longer
than the chamfer on the tap and the opposite hand to that
of rotation . Also known as a “chip driver .”
Threads Per Inch: The number of threads in one inch
of length .
Thread relief: The clearance produced by removing metal
from behind the cutting edge . When the thread angle is
relieved from the heel to the cutting edge, it is called an
“eccentric” relief . When the thread angle is relieved from
the heel to a portion of the land width only, it is called a
“con-eccentric” relief .
B-49

Similar documents